index_title=Linux Firewall index_version=nftables version $1 index_tab_chains=Chains index_tab_sets=Sets index_editing=Rules file $1 index_ecommand=The nftables command $1 was not found on your system. index_ekernel=An error occurred checking your current nftables configuration: $1 index_header=Existing nftables rules index_change=Selected table index_table_filter=Packet filtering index_table_nat=Network address translation index_table_mangle=Packet alteration index_table_ok=Display table index_chain=Chain $1 index_action=Action index_desc=Condition index_comm=Comment index_move=Move index_add=Add index_policy=Set default action: index_policy_accept=Accept index_policy_drop=Drop index_policy_queue=Userspace index_policy_return=Return index_chain_col=Chain index_type=Type index_hook=Hook index_priority=Priority index_policy_col=Policy index_rules=Rules index_rules_none=No rules index_actions=Actions index_sets=Sets index_set_name=Name index_set_type=Type index_set_flags=Flags index_set_elements=Elements index_set_actions=Actions index_set_create=Create set index_set_createdesc=Add a new set to this table. index_set_edit=Edit set index_set_delete=Delete set index_set_deletesel=Delete Selected Sets index_chain_create=Create chain index_chain_createdesc=Add a new chain to this table. index_cedit=Edit index_cdelete=Delete Chain index_crename=Rename index_cclear=Clear All Rules index_cdeletesel=Delete Selected Chains index_cmovesel=Move Selected index_radd=Add Rule index_apply_changes=Apply Changes index_ruleset_active=View Active Ruleset index_ruleset_activedesc=View active nftables tables and import copies into module's saved configuration. index_foreign_firewalls=The other configured firewall modules were detected: $1. It is recommended not to use multiple programs to change the active kernel firewall configuration at the same time. index_edit_manual=Edit Config Files index_edit_manualdesc=Edit saved nftables configuration files manually. index_allowip_go=Allow IP/CIDR index_blockip_go=Block IP/CIDR index_allowport_go=Add allowed port index_allowservice_go=Add allowed service index_forward_go=Add port forward quick_ip_placeholder=$1 or $2 quick_port_placeholder=80 or 8000-8080 quick_service_placeholder=ssh, http or dns quick_service_nomatch=No matching services quick_service_searchfail=Service lookup failed quick_forward_src=from port quick_forward_to=to quick_forward_dst=port quick_forward_addr=destination IP or blank for this system quick_source_ports=source quick_allow_err=Failed to allow IP/CIDR quick_block_err=Failed to block IP/CIDR quick_port_err=Failed to add allowed port quick_service_err=Failed to add allowed service quick_forward_err=Failed to add port forward quick_eaction=No quick action selected. quick_etable=No such table selected. quick_echain=Table $1 has no input chain to add this rule to. quick_efamily=Table $1 cannot contain these quick firewall rules. quick_eip=Enter a valid IPv4 or IPv6 address, with an optional CIDR prefix. quick_eport=Enter a valid TCP or UDP port number, or a range like 8000-8080. quick_eportrange=Port ranges must start with a lower port number. quick_eproto=Select TCP or UDP as the network protocol. quick_eservice=Enter or select a valid service to allow. quick_eservice_empty=Service $1 has no usable TCP, UDP or protocol definitions for nftables. quick_eforward_addr=Enter a valid IPv4 or IPv6 destination address, without a CIDR prefix. quick_eforward_family=Table $1 cannot forward to that destination address family. quick_eforward_target=Enter a destination port and/or destination address for the forward. quick_edup=An equivalent quick rule for $1 already exists. quick_failed=Failed to save and apply quick rule: $1 index_unapply=Revert Configuration index_unapplydesc=Click this button to reset the configuration listed above to the one that is currently active. index_bootup=Activate at Boot index_bootupdesc=Change whether saved module-managed nftables rules are applied at boot time or not. bootup_einit=This system does not support boot-time service management from Webmin. index_return=rules list edit_title=Edit Rule edit_header=Rule Details edit_rule=Rule definition create=Create save=Save delete=Delete save_err=Failed to save rule apply_err=Failed to apply configuration apply_enone=No saved nftables tables were found to apply. apply_eexternal=Cannot apply configuration because table $1 is currently marked as externally managed. apply_esettype=Set $1 in table $2 has type $3, but chain $4 uses it for $5. Use ipv4_addr or ipv6_addr sets for address fields, and inet_service sets for port fields. setup_header=Ruleset profile setup_err=Failed to create ruleset profile setup_table_name=Table name setup_profile=Profile setup_profile_allow_all=Allow all traffic setup_profile_allow_all_desc=Open input, forward and output policy setup_profile_management=Management only setup_profile_management_desc=Allow SSH and this Webmin service, with outgoing traffic allowed setup_profile_web=Web server setup_profile_web_desc=Management access plus HTTP and HTTPS setup_profile_mail=Mail server setup_profile_mail_desc=SSH and Usermin access plus SMTP, submission, SMTPS, POP3, POP3S, IMAP and IMAPS setup_profile_dns=DNS server setup_profile_dns_desc=Management access plus DNS, DNS-over-TLS, DHCPv6 client and mDNS setup_profile_virtualmin=Virtualmin hosting server setup_profile_virtualmin_desc=Management, web, mail, DNS, FTP, Usermin and passive FTP ports setup_profile_locked=Locked-down server setup_profile_locked_desc=Drop input, forward and output traffic with no service exceptions setup_profile_custom=Custom selected services setup_profile_custom_desc=Use only the services and ports selected below setup_services=Allowed services and ports setup_service_col=Service or port setup_type_col=Type setup_port_col=Port setup_proto_col=Protocol setup_type_service=Service setup_type_port=Port setup_svc_ssh=SSH setup_svc_webmin=Webmin setup_svc_dhcpv6=DHCPv6 client setup_svc_dns=DNS setup_svc_dot=DNS-over-TLS setup_svc_ftp=FTP setup_svc_http=HTTP setup_svc_https=HTTPS setup_svc_imap=IMAP setup_svc_imaps=IMAPS setup_svc_mdns=mDNS setup_svc_pop3=POP3 setup_svc_pop3s=POP3S setup_svc_smtp=SMTP setup_svc_submission=SMTP submission setup_svc_smtps=SMTPS setup_port_ftp_data=FTP data setup_port_ssh_alt=FTP over SSH setup_port_webmin_range=Webmin RPC setup_port_usermin=Usermin setup_port_passive_ftp=FTP passive range setup_create=Create setup_invalid_type=Invalid ruleset type selected. setup_edup=Table $1 already exists in module's saved nftables configuration. setup_eservice=Invalid service selected: $1 setup_failed=Failed to create ruleset profile: 
$1
index_profile_setup=Create Ruleset Profile index_profile_setupdesc=Create a managed nftables table from a predefined profile. index_table_create=Create Table index_table_createdesc=Add a new nftables table. index_table_delete=Delete Table index_table_deletedesc=Remove the currently selected table. index_rule_desc=Action $1 for protocol $2 and destination port $3 index_rule_desc2=Action $1 for outgoing interface $2 index_rule_desc3=Action $1 for incoming interface $2 index_rule_desc4=Action $1 for incoming interface $2 and outgoing interface $3 index_rule_desc_generic=Action $1 for $2 index_rule_desc_action=Action $1 index_rule_iif=Incoming interface $1 index_rule_oif=Outgoing interface $1 index_rule_saddr=Source $1 index_rule_daddr=Destination $1 index_rule_proto=Protocol $1 index_rule_sport=Source port $1 index_rule_dport=Destination port $1 index_rule_icmp=ICMP type $1 index_rule_icmpv6=ICMPv6 type $1 index_rule_ct=Conntrack state $1 index_rule_tcpflags=TCP flags $1 index_rule_limit=Limit $1 index_rule_log=Log index_rule_log_prefix=Log prefix $1 index_rule_log_level=Log level $1 index_rule_counter=Counter index_rule_jump=Jump $1 index_rule_goto=Goto $1 index_accept=Accept index_drop=Drop index_reject=Reject index_return_action=Return index_redirect=Redirect index_dnat=DNAT index_redirect_to=Redirect to $1 index_dnat_to=DNAT to $1 edit_title_new=Create Rule edit_title_edit=Edit Rule edit_comment=Comment edit_action=Action edit_return=Return edit_redirect_action=Redirect edit_dnat_action=DNAT edit_jump_action=Jump edit_goto_action=Goto edit_jump=Jump target chain edit_goto=Goto target chain edit_nat_addr=Forward to address edit_nat_port=Forward to port edit_proto=Protocol edit_proto_any=Any edit_saddr=Source address edit_daddr=Destination address edit_sport=Source port edit_dport=Destination port edit_set_none=None edit_saddr_set=Use set $1 edit_daddr_set=Use set $1 edit_sport_set=Use set $1 edit_dport_set=Use set $1 edit_ports_note=For inbound services such as SSH, match the destination port. Rules are evaluated from top to bottom, so a later drop will not override an earlier accept. edit_icmp_type=ICMP/ICMPv6 type edit_ct_state=Conntrack state edit_tcp_flags=TCP flags edit_tcp_flags_mask=TCP flags mask edit_limit_rate=Limit rate edit_limit_burst=Limit burst edit_log=Logging edit_log_enable=Enable logging edit_log_prefix=Prefix $1 edit_log_level=Level $1 edit_counter=Counter edit_counter_enable=Enable counter edit_raw_rule=Raw rule edit_raw_rule_direct=Edit directly edit_advanced=Advanced options edit_oif=Outgoing Interface edit_iif=Incoming Interface edit_if_any=Any chain_title_new=Create chain chain_title_edit=Edit chain chain_header=Chain Details chain_name=Chain name chain_type=Type chain_hook=Hook chain_priority=Priority chain_policy=Policy chain_type_none=Regular (no hook) chain_hook_none=None chain_policy_none=None chain_err=Failed to save chain chain_failed=Failed to save chain: 
$1
chain_ename=Chain name is invalid chain_edup=A chain with that name already exists chain_notable=No such table selected chain_nochain=No such chain selected chain_ebase=Base chains require type, hook, priority, and policy. delete_chain_err=Failed to delete chain delete_chain_failed=Failed to delete chain: 
$1
delete_chain_inuse=Chain $1 is referenced by $2 rule(s) via jump/goto. Remove those rules first. delete_chains_err=Failed to delete selected chains delete_chains_failed=Failed to delete selected chains: 
$1
delete_chains_enone=No chains selected delete_chains_nochain=No such chain selected: $1 delete_chains_inuse=The selected chains are referenced by $1 rule(s) in chains that are not being deleted. Remove those rules first. rename_chain_title=Rename chain rename_chain_header=Rename chain rename_chain_old=Current name rename_chain_new=New name rename_chain_ok=Rename rename_chain_failed=Failed to rename chain: 
$1
create_title=Create table create_header=Create a new table create_family=Table family create_name=Table name create_ok=Create create_err=Failed to create table create_failed=Failed to create table: 
$1
create_ename=Table name is invalid create_edup=A table with that name and family already exists create_efamily=Invalid table family selected create_eexternal=Cannot create table $1 because that active table is externally managed. delete_title=Delete table delete_err=Failed to delete table delete_failed=Failed to delete table: 
$1
delete_confirm=Are you sure you want to delete table $1? delete_notable=No such table selected save_failed=Failed to save rule: 
$1
save_raw_empty=Raw rule cannot be empty. save_raw_multiline=Raw rule must be a single line. save_invalid_rule=Raw rule is invalid: $1 save_set_missing=Selected set $1 does not exist. save_set_type=Selected set $1 has type $2, which cannot be used for $3. move_err=Failed to move rule move_failed=Failed to move rule: 
$1
move_notable=No such table selected move_nochain=No such chain selected move_norule=No such rule selected set_title_new=Create set set_title_edit=Edit set set_header=Set Details set_name=Set name set_type=Type set_type_select=Select type set_flags=Flags set_elements=Elements set_elements_desc=Enter IP addresses, CIDR ranges, ports, or other values valid for this set type, separated with commas or newlines set_err=Failed to save set set_failed=Failed to save set: 
$1
set_ename=Set name is invalid set_edup=A set with that name already exists set_etype=Set type is required set_notable=No such table selected set_noset=No such set selected delete_set_err=Failed to delete set delete_set_failed=Failed to delete set: 
$1
delete_set_inuse=Set $1 is referenced by $2 rule(s). Remove those rules first. delete_sets_err=Failed to delete selected sets delete_sets_failed=Failed to delete selected sets: 
$1
delete_sets_enone=No sets selected delete_sets_noset=No such set selected: $1 delete_sets_inuse=The selected sets are referenced by $1 rule(s). Remove those rules first. active_title=Active Ruleset active_failed=Failed to read active nftables ruleset: $1 active_none=No active nftables tables were found. active_table=Table active_flags=Flags active_chains=Chains active_sets=Sets active_rules=Rules active_status=Status active_webmin=Managed by Webmin active_external=Externally managed active_unclaimed=Unclaimed active_import=Import Copy active_importdesc=Import this active table as a separate module-managed table. active_clear=Clear active_clear_all=Clear All active_clear_alldesc=Remove all clearable active nftables tables from the live ruleset. active_return=active ruleset active_table_title=Active Table active_table_err=Failed to view active table active_table_notable=No such active table selected active_table_summary=Active table details clear_title=Clear active table clear_err=Failed to clear active table clear_confirm=Clear active table $1 from the live ruleset? This does not change module's saved configuration. clear_failed=Failed to clear active table: $1 clear_all_title=Clear active tables clear_all_err=Failed to clear active tables clear_all_enone=No clearable active tables were found. clear_all_confirm=Clear $1 active table(s) from the live ruleset? This does not change module's saved configuration. Tables managed externally will not be cleared. import_title=Import active table import_header=Import table as module-managed copy import_err=Failed to import active table import_esource=No such active table selected import_eexternal=Cannot import as table $1 because that active table is externally managed. import_emanaged=Table $1 is already managed by Webmin. import_source=Source table import_flags=Source flags import_external_note=This active table is marked as externally managed; importing creates a separate module-managed copy and does not change the active source table import_new_name=New table name import_ok=Import Copy manual_editsel=Edit nftables configuration file manual_err=Failed to save config file manual_efile=Selected configuration file is not valid manual_enofile=No editable nftables configuration file is configured manual_etables=You cannot edit the full rules file unless this user can manage all tables. manual_evalidate=The nftables configuration is invalid: $1 manual_ok=Edit acl_ecannot=You are not allowed to perform this nftables action. acl_etable=You are not allowed to manage table $1. acl_tables=Tables this user can manage acl_tables_all=All tables acl_tables_sel=Selected tables acl_tables_nsel=All except selected tables acl_view=View managed tables and rules acl_active=List active ruleset acl_create=Create tables acl_setup=Create ruleset profiles acl_chains=Create, edit and rename chains acl_sets=Create and edit sets acl_rules=Create, edit, move and delete rules acl_raw=Edit raw rule text acl_delete=Delete tables, chains and sets acl_apply=Apply saved configuration acl_bootup=Enable firewall at boot acl_import=Import active tables acl_clear=Clear active tables acl_quick=Use quick controls acl_quick_ip=Use quick IP allow/block controls acl_quick_port=Use quick allowed port controls acl_quick_service=Use quick allowed service controls acl_quick_forward=Use quick port forward controls acl_manual=Edit config files manually