diff --git a/adsl-client/lang/de b/adsl-client/lang/de index ecd0d020b..b7159df13 100644 --- a/adsl-client/lang/de +++ b/adsl-client/lang/de @@ -63,4 +63,4 @@ log_stop=ADSL-Verbindung beendet log_start=ADSL-Verbindung gestartet log_bootup=ADSL beim Systemstart aktiviert log_bootdown=ADSL beim Systemstart deaktiviert -log_setup=Standardkonfiguration eingerichtet +log_setup=Standardkonfiguration eingerichtet \ No newline at end of file diff --git a/adsl-client/lang/zh b/adsl-client/lang/zh index 2c1894c54..dcc60bcd0 100644 --- a/adsl-client/lang/zh +++ b/adsl-client/lang/zh @@ -64,3 +64,5 @@ log_start=启动ADSL log_bootup=开机时自动启动ADSL log_bootdown=关闭开机时自动启动ADSL log_setup=设置为默认配置 + +__norefs=1 diff --git a/ajaxterm/lang/de b/ajaxterm/lang/de index a06a72be9..e7450eb35 100644 --- a/ajaxterm/lang/de +++ b/ajaxterm/lang/de @@ -2,4 +2,4 @@ index_title=Text-Anmeldung index_epython=Ajaxterm erfordert Python zur Ausführung, aber der Befehl $1 wurde auf Ihrem System nicht gefunden. index_estart=Ajaxterm hat nach $1 Sekunden keine Verbindungen auf Port $2 akzeptiert. index_popup=In separatem Fenster öffnen .. -index_credits=Verwendet Code von Ajaxterm von Antony Lesuisse. +index_credits=Verwendet Code von Ajaxterm von Antony Lesuisse. \ No newline at end of file diff --git a/ajaxterm/lang/zh b/ajaxterm/lang/zh index 774b0b99d..16e298b0f 100644 --- a/ajaxterm/lang/zh +++ b/ajaxterm/lang/zh @@ -3,3 +3,4 @@ index_epython=Ajaxterm 需要运行 Python ，但在系统上找不到 $1 命令 index_estart=$1 秒后Ajaxterm没有开始在端口 $2 上接受连接. index_popup=在新窗口打开 .. index_credits=使用了Antony Lesuisse的 Ajaxterm 代码. +__norefs=1 diff --git a/backup-config/lang/de b/backup-config/lang/de index a88f341bf..6f555d0ba 100644 --- a/backup-config/lang/de +++ b/backup-config/lang/de @@ -119,4 +119,4 @@ email_sok=Konfigurations-Backup auf $1 erfolgreich email_final=Die endgültige Backup-Dateigröße betrug $1 email_pre=Vor-Backup-Befehl $1 wird ausgeführt .. email_post=Nach-Backup-Befehl $1 wird ausgeführt .. -email_prefailed=Vor-Backup-Befehl fehlgeschlagen! +email_prefailed=Vor-Backup-Befehl fehlgeschlagen! \ No newline at end of file diff --git a/bacula-backup/lang/de b/bacula-backup/lang/de index 073a69b17..cb06cf0b4 100644 --- a/bacula-backup/lang/de +++ b/bacula-backup/lang/de @@ -660,4 +660,4 @@ restore_eall2=Die Option Alle Clients im Backup kann nur für Wiederhe restore_enofiles=Keine der ausgewählten Dateien befinden sich im Backup restore_level_F=Vollständig restore_level_D=Differenziell -restore_level_I=Inkremental +restore_level_I=Inkremental \ No newline at end of file diff --git a/bandwidth/lang/de b/bandwidth/lang/de index 371f5dd3e..cf42045d7 100644 --- a/bandwidth/lang/de +++ b/bandwidth/lang/de @@ -83,4 +83,4 @@ syslog_syslog-ng=Syslog-NG rotate_title=Statistiken aktualisieren rotate_doing=Protokollierten Netzwerkverkehr verarbeiten .. -rotate_done=.. erledigt. +rotate_done=.. erledigt. \ No newline at end of file diff --git a/bind8/lang/af.auto b/bind8/lang/af.auto index 3572dcd8e..7a39f3978 100644 --- a/bind8/lang/af.auto +++ b/bind8/lang/af.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Hash-algoritme value_NSEC3PARAM2=NSEC3-vlae value_NSEC3PARAM3=Aantal hash-iterasies value_NSEC3PARAM4=Sout string -value_NSEC3PARAM4_none=None value_delegated=Gedelegeerde sone value_notdelegated=Ander sone value_other=Waardes (een per reël) @@ -1283,10 +1282,6 @@ zonekey_private=Privaat sleutelbesonderhede : zonekey_privatefile=Privaat sleutellêer : $1 zonekey_algorithm=DNSSEC-algoritme : $1 zonekey_ds=DS rekord vir ouer sone : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Wys openbare en private besonderhede vir sleutelteken-sleutel .. zonekey_expandzone=Wys besonderhede rakende die sleutel in die openbare en privaat sone .. zonekey_noprivate=Webmin kon egter nie die private sleutel vind wat geassosieer word met die sone nie, en sal dit dus nie weer kan onderteken nie. diff --git a/bind8/lang/ar.auto b/bind8/lang/ar.auto index add21cc6a..00b1b2650 100644 --- a/bind8/lang/ar.auto +++ b/bind8/lang/ar.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=خوارزمية التجزئة value_NSEC3PARAM2=أعلام NSEC3 value_NSEC3PARAM3=عدد تكرارات التجزئة value_NSEC3PARAM4=سلسلة الملح -value_NSEC3PARAM4_none=None value_delegated=منطقة مفوضة value_notdelegated=منطقة أخرى value_other=القيم (واحد لكل سطر) @@ -1283,10 +1282,6 @@ zonekey_private=تفاصيل المفتاح الخاص : zonekey_privatefile=Private key file : $1 zonekey_algorithm=خوارزمية DNSSEC :$1 zonekey_ds=سجل DS للمنطقة الأم : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=عرض تفاصيل مفتاح التوقيع العام والخاص .. zonekey_expandzone=عرض تفاصيل مفتاح المنطقة العامة والخاصة .. zonekey_noprivate=ومع ذلك ، لم يتمكن Webmin من العثور على المفتاح الخاص المرتبط بالمنطقة ، وبالتالي لن يتمكن من إعادة تسجيله. diff --git a/bind8/lang/be.auto b/bind8/lang/be.auto index 927e20f7b..03b6262e3 100644 --- a/bind8/lang/be.auto +++ b/bind8/lang/be.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Алгарытм хэша value_NSEC3PARAM2=Сцягі NSEC3 value_NSEC3PARAM3=Колькасць ітэрацый хэша value_NSEC3PARAM4=Солевая струна -value_NSEC3PARAM4_none=None value_delegated=Дэлегаваная зона value_notdelegated=Іншая зона value_other=Значэнні (па адным на радок) @@ -1283,10 +1282,6 @@ zonekey_private=Падрабязнасці прыватнага ключа : zonekey_privatefile=Файл прыватнага ключа : $1 zonekey_algorithm=Алгарытм DNSSEC : $1 zonekey_ds=Запіс DS для бацькоўскай зоны : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Паказаць дэталі адкрытых і прыватных ключоў. zonekey_expandzone=Паказаць падрабязную інфармацыю аб дзяржаўных і прыватных зонах. zonekey_noprivate=Аднак Webmin не змог знайсці прыватны ключ, звязаны з зонай, і таму не зможа паўторна падпісаць яго. diff --git a/bind8/lang/bg.auto b/bind8/lang/bg.auto index f184d4dd7..518924041 100644 --- a/bind8/lang/bg.auto +++ b/bind8/lang/bg.auto @@ -25,7 +25,6 @@ edit_NAPTR=Указател на пълномощия за име recs_CAA=Сертифициращ орган recs_NAPTR=Орган по име -value_NSEC3PARAM4_none=None value_dmarcfo=Режим на докладване за неуспех value_dmarcfo0=Отчетете, ако DKIM и SPF не са успели value_dmarcfo1=Отчетете, ако DKIM или SPF не са успели @@ -57,8 +56,4 @@ massdelete_vwarn=Някои зони са свързани с домейна Vir massdelete_vwarn2=Някои зони са свързани с домейна Virtualmin $1 и $2 други и затова не трябва да се изтриват тук! zonekey_algorithm=DNSSEC алгоритъм : $1 -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_keep=Да се запази съществуващият ключ, ако DNSSEC бъде активиран отново? diff --git a/bind8/lang/ca.auto b/bind8/lang/ca.auto index fa1144315..5a4ca5406 100644 --- a/bind8/lang/ca.auto +++ b/bind8/lang/ca.auto @@ -29,7 +29,6 @@ edit_NAPTR=Nom del punter d'autoritat recs_CAA=Autoritat de Certificació recs_NAPTR=Nom Autoritat -value_NSEC3PARAM4_none=None value_dmarcfo=Mode d'informes d'errors value_dmarcfo0=Informeu si DKIM i SPF han fallat value_dmarcfo1=Informeu si DKIM o SPF han fallat @@ -61,10 +60,6 @@ massdelete_vwarn=Algunes zones estan associades al domini Virtualmin $1, per tan massdelete_vwarn2=Algunes zones estan associades al domini Virtualmin $1 i $2, per tant, no hauríem de suprimir-les. zonekey_algorithm=Algorisme DNSSEC : $1 -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_keep=Mantenir la clau existent si es torna a activar DNSSEC? trusted_warning=Avís! La configuració del client de BIND DNSSEC conté claus obsoletes que deixaran de funcionar a l'octubre de 2017. O bé, utilitzeu la pàgina de verificació BIND DNSSEC per ajustar la configuració o feu clic al botó següent. diff --git a/bind8/lang/cs.auto b/bind8/lang/cs.auto index ea26c9319..2584fc590 100644 --- a/bind8/lang/cs.auto +++ b/bind8/lang/cs.auto @@ -117,7 +117,6 @@ value_NSEC3PARAM1=Hash algoritmus value_NSEC3PARAM2=Příznaky NSEC3 value_NSEC3PARAM3=Počet iterací hash value_NSEC3PARAM4=Sůl řetězec -value_NSEC3PARAM4_none=None value_delegated=Delegovaná zóna value_notdelegated=Jiná zóna value_spfip6s=Další povolené adresy / sítě IPv6 odesílatele @@ -400,10 +399,6 @@ zonekey_private=Podrobnosti soukromého klíče : zonekey_privatefile=Soubor soukromého klíče : $1 zonekey_algorithm=Algoritmus DNSSEC : $1 zonekey_ds=Záznam DS pro nadřazenou zónu : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Zobrazit podrobnosti veřejného a soukromého klíče-podpis-klíč .. zonekey_expandzone=Zobrazit podrobnosti o veřejných a soukromých zónách .. zonekey_noprivate=Webmin však nemohl najít soukromý klíč přidružený k zóně, a proto jej nebude moci znovu podepsat. diff --git a/bind8/lang/da.auto b/bind8/lang/da.auto index 63ac01f9b..8bcbab620 100644 --- a/bind8/lang/da.auto +++ b/bind8/lang/da.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Hash-algoritme value_NSEC3PARAM2=NSEC3-flag value_NSEC3PARAM3=Antal hash-iterationer value_NSEC3PARAM4=Salt streng -value_NSEC3PARAM4_none=None value_delegated=Delegeret zone value_notdelegated=Anden zone value_other=Værdier (en pr. Linje) @@ -1283,10 +1282,6 @@ zonekey_private=Detaljer om private nøgler : zonekey_privatefile=Privat nøglefil : $1 zonekey_algorithm=DNSSEC-algoritme : $1 zonekey_ds=DS-post for overordnet zone : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Vis oplysninger om offentlig og privat nøglesignering-nøgle .. zonekey_expandzone=Vis offentlig og privat zone-nøgleoplysninger .. zonekey_noprivate=Webmin kunne imidlertid ikke finde den private nøgle, der er tilknyttet zonen, og vil derfor ikke kunne underskrive den igen. diff --git a/bind8/lang/de b/bind8/lang/de index f50b3b088..78d96e11e 100644 --- a/bind8/lang/de +++ b/bind8/lang/de @@ -849,6 +849,7 @@ findfree_header=In $1 findfree_sopt=Suchoptionen findfree_fromip=Von IP-Adresse findfree_toip=Bis IP-Adresse +findfree_cffreeXXX Hostnamen als freie IP-Adressen betrachten? findfree_search=Suche findfree_msg=Gefundene $1 freie IP-Adressen findfree_msg2=(davon $1 wie freeXXX, $2 wie freemac) @@ -1343,4 +1344,4 @@ xfer_doing=Teste Transfer der Slave-Zone von $1 .. xfer_failed=.. von $1 : Fehlgeschlagen : $2 xfer_done=.. von $1 : Erfolgreich abgeschlossen xfer_count=Der Test-Transfer hat erfolgreich $1 Datensätze von mindestens einem Nameserver abgerufen. Tatsächliche Transfers durch BIND sollten ebenfalls erfolgreich sein. -xfer_none=Der Test-Transfer schien erfolgreich, hat jedoch keine Datensätze abgerufen! +xfer_none=Der Test-Transfer schien erfolgreich, hat jedoch keine Datensätze abgerufen! \ No newline at end of file diff --git a/bind8/lang/de.auto b/bind8/lang/de.auto deleted file mode 100644 index dae98f463..000000000 --- a/bind8/lang/de.auto +++ /dev/null @@ -1 +0,0 @@ -findfree_cf=Consider freeXXX hostnames as free IPs? diff --git a/bind8/lang/el.auto b/bind8/lang/el.auto index c73b885b7..371b8fa83 100644 --- a/bind8/lang/el.auto +++ b/bind8/lang/el.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Αλγόριθμος Hash value_NSEC3PARAM2=NSEC3 σημαίες value_NSEC3PARAM3=Αριθμός επαναλήψεων κατακερματισμού value_NSEC3PARAM4=Σειρά αλατιού -value_NSEC3PARAM4_none=None value_delegated=Δεσμευμένη ζώνη value_notdelegated=Άλλη ζώνη value_other=Τιμές (μία ανά γραμμή) @@ -1283,10 +1282,6 @@ zonekey_private=Στοιχεία ιδιωτικού κλειδιού : zonekey_privatefile=Αρχείο ιδιωτικού κλειδιού : $1 zonekey_algorithm=Αλγόριθμος DNSSEC : $1 zonekey_ds=Εγγραφή DS για γονική ζώνη : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Εμφάνιση στοιχείων κλειδιού δημόσιου και ιδιωτικού κλειδιού υπογραφής. zonekey_expandzone=Εμφάνιση δημόσιων και ιδιωτικών στοιχείων κλειδιού ζώνης .. zonekey_noprivate=Ωστόσο, το Webmin δεν μπόρεσε να βρει το ιδιωτικό κλειδί που σχετίζεται με τη ζώνη και έτσι δεν θα μπορέσει να το ξαναγράψει. diff --git a/bind8/lang/es.auto b/bind8/lang/es.auto index cba274089..3afafd8dc 100644 --- a/bind8/lang/es.auto +++ b/bind8/lang/es.auto @@ -155,7 +155,6 @@ value_NSEC3PARAM1=Algoritmo hash value_NSEC3PARAM2=Banderas NSEC3 value_NSEC3PARAM3=Número de iteraciones hash value_NSEC3PARAM4=Hilo de sal -value_NSEC3PARAM4_none=None value_delegated=Zona delegada value_notdelegated=Otra zona value_other=Valores (uno por línea) @@ -599,10 +598,6 @@ zonekey_private=Detalles de la clave privada : zonekey_privatefile=Archivo de clave privada : $1 zonekey_algorithm=Algoritmo DNSSEC : $1 zonekey_ds=Registro DS para zona principal : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Mostrar detalles de clave de firma de clave pública y privada. zonekey_expandzone=Mostrar detalles de clave de zona pública y privada. zonekey_noprivate=Sin embargo, Webmin no pudo encontrar la clave privada asociada con la zona, por lo que no podrá volver a firmarla. diff --git a/bind8/lang/eu.auto b/bind8/lang/eu.auto index 993b79ac6..e330ce2c8 100644 --- a/bind8/lang/eu.auto +++ b/bind8/lang/eu.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Hash algoritmoa value_NSEC3PARAM2=NSEC3 banderak value_NSEC3PARAM3=Hash iterazio kopurua value_NSEC3PARAM4=Gatz katea -value_NSEC3PARAM4_none=None value_delegated=Toki delegatua value_notdelegated=Beste zona value_other=Balioak (lerro bakoitzeko bat) @@ -1283,10 +1282,6 @@ zonekey_private=Gako pribatuaren xehetasunak : zonekey_privatefile=Gako fitxategi pribatua : $1 zonekey_algorithm=DNSSEC algoritmoa : $1 zonekey_ds=Guraso-eremuko DS erregistroa : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Erakutsi gako-sinaduraren gako publikoak eta pribatuak .. zonekey_expandzone=Erakutsi eremu publiko eta pribatuko giltzarrien xehetasunak .. zonekey_noprivate=Hala ere, Webmin-ek ezin izan du zonarekin lotutako gako pribatua aurkitu eta, beraz, ezin izango da berriro sinatu. diff --git a/bind8/lang/fa.auto b/bind8/lang/fa.auto index aecc09381..242138cb3 100644 --- a/bind8/lang/fa.auto +++ b/bind8/lang/fa.auto @@ -137,7 +137,6 @@ value_NSEC3PARAM1=الگوریتم هاش value_NSEC3PARAM2=پرچم های NSEC3 value_NSEC3PARAM3=تعداد تکرارهای هش value_NSEC3PARAM4=رشته نمک -value_NSEC3PARAM4_none=None value_delegated=منطقه تفویض شده value_notdelegated=منطقه دیگر value_spfa=ارسال از آدرس IP دامنه مجاز است؟ @@ -539,10 +538,6 @@ zonekey_private=جزئیات کلید خصوصی : zonekey_privatefile=Private key file : $1 zonekey_algorithm=الگوریتم DNSSEC : $1 zonekey_ds=ضبط DS برای منطقه والدین : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=نمایش جزئیات عمومی و خصوصی کلید امضاء کلید. .. zonekey_expandzone=نمایش جزئیات کلیدی منطقه عمومی و خصوصی .. zonekey_noprivate=با این حال ، وبمین نمی تواند کلید خصوصی مرتبط با منطقه را پیدا کند ، بنابراین قادر نخواهد بود دوباره آن را امضا کنید. diff --git a/bind8/lang/fi.auto b/bind8/lang/fi.auto index 372b170a9..42e71f220 100644 --- a/bind8/lang/fi.auto +++ b/bind8/lang/fi.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Hash-algoritmi value_NSEC3PARAM2=NSEC3-liput value_NSEC3PARAM3=Hajaistutusten lukumäärä value_NSEC3PARAM4=Suola merkkijono -value_NSEC3PARAM4_none=None value_delegated=Siirretty alue value_notdelegated=Muu vyöhyke value_other=Arvot (yksi riviä kohti) @@ -1283,10 +1282,6 @@ zonekey_private=Yksityiset avaintiedot : zonekey_privatefile=Yksityinen avaintiedosto : $1 zonekey_algorithm=DNSSEC-algoritmi : $1 zonekey_ds=Vanhemman vyöhykkeen DS-tietue : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Näytä julkisen ja yksityisen avaimen allekirjoittamisen avaimen yksityiskohdat .. zonekey_expandzone=Näytä julkisen ja yksityisen alueen avaintiedot. zonekey_noprivate=Webmin ei kuitenkaan löytänyt vyöhykkeeseen liittyvää yksityistä avainta, joten ei voi allekirjoittaa sitä uudelleen. diff --git a/bind8/lang/fr.auto b/bind8/lang/fr.auto index 81f29047a..0979db298 100644 --- a/bind8/lang/fr.auto +++ b/bind8/lang/fr.auto @@ -16,7 +16,6 @@ edit_NAPTR=Pointeur d'autorité de nom recs_NAPTR=Nom Autorité -value_NSEC3PARAM4_none=None value_dmarcfo=Mode de rapport d'échec value_dmarcfo0=Signaler si DKIM et SPF ont échoué value_dmarcfo1=Signaler si DKIM ou SPF a échoué @@ -42,8 +41,4 @@ value_NAPTR3_U=Utiliser la sortie regexp ensuite value_NAPTR3_P=Action spécifique au protocole zonekey_algorithm=Algorithme DNSSEC  : $1 -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_keep=Conserver la clé existante si DNSSEC est réactivé ? diff --git a/bind8/lang/he.auto b/bind8/lang/he.auto index b6e167891..b9efef9c0 100644 --- a/bind8/lang/he.auto +++ b/bind8/lang/he.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=האלגוריתם של האש value_NSEC3PARAM2=דגלי NSEC3 value_NSEC3PARAM3=מספר חזרות חשיש value_NSEC3PARAM4=מיתר מלח -value_NSEC3PARAM4_none=None value_delegated=אזור מוגן value_notdelegated=אזור אחר value_other=ערכים (אחד בכל שורה) @@ -1283,10 +1282,6 @@ zonekey_private=פרטי מפתח פרטיים : zonekey_privatefile=קובץ מפתח פרטי : $1 zonekey_algorithm=אלגוריתם DNSSEC : $1 zonekey_ds=רשומת DS לאזור האב : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=הצגת פרטי מפתח-חתימה על מפתח ציבורי ופרטי .. zonekey_expandzone=הצגת פרטי מפתח ציבוריים ופרטיים באזור .. zonekey_noprivate=עם זאת, Webmin לא הצליחה למצוא את המפתח הפרטי המשויך לאזור ולכן היא לא תוכל לחתום עליו מחדש. diff --git a/bind8/lang/hr.auto b/bind8/lang/hr.auto index 68a57aa36..76d31210e 100644 --- a/bind8/lang/hr.auto +++ b/bind8/lang/hr.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Hash algoritam value_NSEC3PARAM2=NSEC3 zastave value_NSEC3PARAM3=Broj iteracija heš value_NSEC3PARAM4=Slana struna -value_NSEC3PARAM4_none=None value_delegated=Delegirana zona value_notdelegated=Druga zona value_other=Vrijednosti (jedna po retku) @@ -1283,10 +1282,6 @@ zonekey_private=Pojedinosti o privatnom ključu : zonekey_privatefile=Datoteka s privatnim ključem : $1 zonekey_algorithm=DNSSEC algoritam : $1 zonekey_ds=DS zapis za roditeljsku zonu : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Prikaži detalje o ključu za javno potpisanje i privatni ključ .. zonekey_expandzone=Prikaži detalje o javnim i privatnim ključevima zona zonekey_noprivate=Međutim, Webmin nije mogao pronaći privatni ključ povezan sa zonom, pa ga neće moći ponovno potpisati. diff --git a/bind8/lang/hu.auto b/bind8/lang/hu.auto index e9f60c250..533794199 100644 --- a/bind8/lang/hu.auto +++ b/bind8/lang/hu.auto @@ -80,7 +80,6 @@ value_NSEC3PARAM1=Hasító algoritmus value_NSEC3PARAM2=NSEC3 zászlók value_NSEC3PARAM3=A hash iterációk száma value_NSEC3PARAM4=Sós húr -value_NSEC3PARAM4_none=None value_delegated=Delegált zóna value_notdelegated=Egyéb zóna value_dmarcnone=Nem tesz intézkedéseket @@ -235,10 +234,6 @@ zonekey_publicfile=Nyilvános kulcsfájl : $1 zonekey_privatefile=Privát kulcsfájl : $1 zonekey_algorithm=DNSSEC algoritmus : $1 zonekey_ds=A szülői zóna DS rekordja : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_eprivate=A zónához társított privát kulcs nem olvasható : $1 zonekey_keep=Megtartja a meglévő kulcsot, ha a DNSSEC újra engedélyezve van? diff --git a/bind8/lang/it.auto b/bind8/lang/it.auto index 2fba3b305..ca5839010 100644 --- a/bind8/lang/it.auto +++ b/bind8/lang/it.auto @@ -183,7 +183,6 @@ value_NSEC3PARAM1=Algoritmo di hash value_NSEC3PARAM2=Bandiere NSEC3 value_NSEC3PARAM3=Numero di iterazioni di hash value_NSEC3PARAM4=Stringa di sale -value_NSEC3PARAM4_none=None value_delegated=Zona delegata value_notdelegated=Altra zona value_other=Valori (uno per riga) @@ -672,10 +671,6 @@ zonekey_private=Dettagli chiave privata : zonekey_privatefile=File chiave privata : $1 zonekey_algorithm=Algoritmo DNSSEC : $1 zonekey_ds=Record DS per la zona padre : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Mostra i dettagli della chiave di firma della chiave pubblica e privata. zonekey_expandzone=Mostra i dettagli delle chiavi di zona pubbliche e private. zonekey_noprivate=Tuttavia, Webmin non è riuscito a trovare la chiave privata associata alla zona, quindi non sarà in grado di firmarla nuovamente. diff --git a/bind8/lang/ja.auto b/bind8/lang/ja.auto index dcc6f58fa..5f93e06cc 100644 --- a/bind8/lang/ja.auto +++ b/bind8/lang/ja.auto @@ -92,7 +92,6 @@ value_NSEC3PARAM1=ハッシュアルゴリズム value_NSEC3PARAM2=NSEC3フラグ value_NSEC3PARAM3=ハッシュ反復回数 value_NSEC3PARAM4=塩ストリング -value_NSEC3PARAM4_none=None value_delegated=委任ゾーン value_notdelegated=その他のゾーン value_spfip6s=追加の許可された送信者IPv6アドレス/ネットワーク @@ -330,10 +329,6 @@ zonekey_private=秘密鍵の詳細： zonekey_privatefile=秘密鍵ファイル：$1 zonekey_algorithm=DNSSECアルゴリズム： $1 zonekey_ds=親ゾーンのDSレコード： -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=公開鍵と秘密鍵の署名鍵の詳細を表示する .. zonekey_expandzone=公開および非公開ゾーンキーの詳細を表示します .. zonekey_noprivate=ただし、Webminはゾーンに関連付けられた秘密キーを見つけることができなかったため、再署名することはできません。 diff --git a/bind8/lang/ko.auto b/bind8/lang/ko.auto index 07da5994e..c58916258 100644 --- a/bind8/lang/ko.auto +++ b/bind8/lang/ko.auto @@ -252,7 +252,6 @@ value_NSEC3PARAM1=해시 알고리즘 value_NSEC3PARAM2=NSEC3 플래그 value_NSEC3PARAM3=해시 반복 횟수 value_NSEC3PARAM4=소금 끈 -value_NSEC3PARAM4_none=None value_delegated=위임 된 영역 value_notdelegated=다른 지역 value_other=값 (한 줄에 하나씩) @@ -857,10 +856,6 @@ zonekey_private=개인 키 정보 : zonekey_privatefile=개인 키 파일 : $1 zonekey_algorithm=DNSSEC 알고리즘 : $1 zonekey_ds=부모 영역에 대한 DS 레코드 : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=공개 및 개인 키 서명 키 세부 정보 표시 .. zonekey_expandzone=공개 및 개인 영역 키 세부 정보 표시 .. zonekey_noprivate=그러나 Webmin은 영역과 관련된 개인 키를 찾을 수 없으므로 다시 서명 할 수 없습니다. diff --git a/bind8/lang/lt.auto b/bind8/lang/lt.auto index e39ed6a8f..560f2780b 100644 --- a/bind8/lang/lt.auto +++ b/bind8/lang/lt.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Hash algoritmas value_NSEC3PARAM2=NSEC3 vėliavos value_NSEC3PARAM3=Maišos pakartojimų skaičius value_NSEC3PARAM4=Druskos styga -value_NSEC3PARAM4_none=None value_delegated=Deleguota zona value_notdelegated=Kita zona value_other=Vertybės (po vieną eilutėje) @@ -1283,10 +1282,6 @@ zonekey_private=Asmeninio rakto informacija : zonekey_privatefile=Asmeninio rakto failas : $1 zonekey_algorithm=DNSSEC algoritmas : $1 zonekey_ds=Tėvų zonos DS įrašas : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Rodyti išsamią viešojo ir privačiojo rakto pasirašymo-rakto informaciją .. zonekey_expandzone=Rodyti išsamią viešosios ir privačios zonos informaciją. zonekey_noprivate=Tačiau „Webmin“ negalėjo rasti su zona susieto privataus rakto, todėl negalės jo pasirašyti iš naujo. diff --git a/bind8/lang/lv.auto b/bind8/lang/lv.auto index 3002caef4..9817dcb79 100644 --- a/bind8/lang/lv.auto +++ b/bind8/lang/lv.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Hasas algoritms value_NSEC3PARAM2=NSEC3 karogi value_NSEC3PARAM3=Jaukšanas iterāciju skaits value_NSEC3PARAM4=Sāls virkne -value_NSEC3PARAM4_none=None value_delegated=Deleģētā zona value_notdelegated=Cita zona value_other=Vērtības (viena katrā rindiņā) @@ -1283,10 +1282,6 @@ zonekey_private=Privātās atslēgas informācija : zonekey_privatefile=Privātās atslēgas fails : $1 zonekey_algorithm=DNSSEC algoritms : $1 zonekey_ds=DS ieraksts vecāku zonai : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Rādīt publiskās un privātās atslēgas parakstīšanas-atslēgas informāciju .. zonekey_expandzone=Rādīt publiskās un privātās zonas atslēgas informāciju .. zonekey_noprivate=Tomēr Webmin nevarēja atrast ar zonu saistīto privāto atslēgu, tāpēc nevarēs to atkārtoti parakstīt. diff --git a/bind8/lang/ms.auto b/bind8/lang/ms.auto index cf7bf26e0..3fe4159ab 100644 --- a/bind8/lang/ms.auto +++ b/bind8/lang/ms.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Algoritma Hash value_NSEC3PARAM2=Bendera NSEC3 value_NSEC3PARAM3=Bilangan lelaran hash value_NSEC3PARAM4=Garisan garam -value_NSEC3PARAM4_none=None value_delegated=Zon perwakilan value_notdelegated=Zon lain value_other=Nilai (satu setiap baris) @@ -1281,10 +1280,6 @@ zonekey_private=Butiran utama peribadi : zonekey_privatefile=Fail kunci peribadi : $1 zonekey_algorithm=Algoritma DNSSEC : $1 zonekey_ds=Rekod DS untuk zon ibu bapa : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Tunjukkan butiran kunci utama-awam dan peribadi .. zonekey_expandzone=Tunjukkan butiran kunci zon awam dan swasta .. zonekey_noprivate=Walau bagaimanapun, Webmin tidak dapat mencari kunci persendirian yang dikaitkan dengan zon itu, dan oleh itu tidak akan dapat menandatanganinya semula. diff --git a/bind8/lang/mt.auto b/bind8/lang/mt.auto index 6672d7e7c..03fbbff0d 100644 --- a/bind8/lang/mt.auto +++ b/bind8/lang/mt.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Algoritmu Hash value_NSEC3PARAM2=Bnadar NSEC3 value_NSEC3PARAM3=Numru ta 'iterazzjonijiet tal-ħaxixa value_NSEC3PARAM4=Spag tal-melħ -value_NSEC3PARAM4_none=None value_delegated=Żona delegata value_notdelegated=Żona oħra value_other=Valuri (wieħed kull linja) @@ -1283,10 +1282,6 @@ zonekey_private=Dettalji ewlenin privati : zonekey_privatefile=Fajl taċ-ċavetta privata : $1 zonekey_algorithm=Algoritmu DNSSEC : $1 zonekey_ds=Rekord DS għaż-żona ġenitur : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Uri d-dettalji ewlenin taċ-ċavetta għall-iffirmar taċ-ċavetta pubblika u privata .. zonekey_expandzone=Uri d-dettalji ewlenin taż-żona pubblika u privata .. zonekey_noprivate=Madankollu, Webmin ma setax isib iċ-ċavetta privata assoċjata maż-żona, u għalhekk mhux se jkun jista 'jiffirmaha mill-ġdid. diff --git a/bind8/lang/nl.auto b/bind8/lang/nl.auto index b25058620..c8992fffe 100644 --- a/bind8/lang/nl.auto +++ b/bind8/lang/nl.auto @@ -77,7 +77,6 @@ value_NSEC3PARAM1=Hash-algoritme value_NSEC3PARAM2=NSEC3-vlaggen value_NSEC3PARAM3=Aantal hash-iteraties value_NSEC3PARAM4=Zout string -value_NSEC3PARAM4_none=None value_delegated=Gedelegeerde zone value_notdelegated=Andere zone value_dmarcnone=Geen actie ondernemen @@ -160,10 +159,6 @@ zonekey_publicfile=Bestand met openbare sleutel : $1 zonekey_privatefile=Privésleutelbestand : $1 zonekey_algorithm=DNSSEC-algoritme : $1 zonekey_ds=DS record voor bovenliggende zone : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_eprivate=De privésleutel die aan deze zone is gekoppeld, kon niet worden gelezen : $1 zonekey_keep=Bestaande sleutel behouden als DNSSEC opnieuw wordt ingeschakeld? diff --git a/bind8/lang/no.auto b/bind8/lang/no.auto index 755be999e..06dbfb24d 100644 --- a/bind8/lang/no.auto +++ b/bind8/lang/no.auto @@ -16,7 +16,6 @@ edit_NAPTR=Navneautoritetspeker recs_NAPTR=Navnemyndighet -value_NSEC3PARAM4_none=None value_dmarcfo=Feilrapporteringsmodus value_dmarcfo0=Rapporter om DKIM og SPF mislyktes value_dmarcfo1=Rapporter om enten DKIM eller SPF mislyktes @@ -42,8 +41,4 @@ value_NAPTR3_U=Bruk regexp-utdata neste value_NAPTR3_P=Protokollspesifikk handling zonekey_algorithm=DNSSEC-algoritme : $1 -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_keep=Behold eksisterende nøkkel hvis DNSSEC er aktivert på nytt? diff --git a/bind8/lang/pl.auto b/bind8/lang/pl.auto index b8f6d97e8..315a320c1 100644 --- a/bind8/lang/pl.auto +++ b/bind8/lang/pl.auto @@ -50,7 +50,6 @@ value_TLSA4=Dane certyfikatu value_SSHFP1=Algorytm klucza publicznego value_SSHFP2=Odcisk palca klucza publicznego value_SSHFP3=Dane klucza publicznego -value_NSEC3PARAM4_none=None value_dmarcruf=Wyślij informacje sądowe do value_dmarcfo=Tryb zgłaszania awarii value_dmarcfo0=Zgłoś, jeśli DKIM i SPF zawiodły @@ -110,10 +109,6 @@ dt_zone_zskrolldesc=Wymuś najazd klucza podpisującego strefę dt_zone_kskrolldesc=Wymuś najazd klucza podpisującego klucz strefy zonekey_algorithm=Algorytm DNSSEC : $1 -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_eprivate=Nie można odczytać klucza prywatnego powiązanego z tą strefą : $1 zonekey_keep=Zachować istniejący klucz, jeśli DNSSEC zostanie ponownie włączony? diff --git a/bind8/lang/pt.auto b/bind8/lang/pt.auto index 0e4f274fc..c988a14a4 100644 --- a/bind8/lang/pt.auto +++ b/bind8/lang/pt.auto @@ -291,7 +291,6 @@ value_NSEC3PARAM1=Algoritmo de hash value_NSEC3PARAM2=Sinalizadores NSEC3 value_NSEC3PARAM3=Número de iterações de hash value_NSEC3PARAM4=Corda de sal -value_NSEC3PARAM4_none=None value_delegated=Zona delegada value_notdelegated=Outra zona value_other=Valores (um por linha) @@ -949,10 +948,6 @@ zonekey_private=Detalhes da chave privada : zonekey_privatefile=Arquivo de chave privada : $1 zonekey_algorithm=Algoritmo DNSSEC : $1 zonekey_ds=Registro do DS para a zona pai : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Mostrar detalhes de chave de assinatura de chave pública e privada. zonekey_expandzone=Mostrar detalhes das chaves de zona públicas e privadas. zonekey_noprivate=No entanto, o Webmin não conseguiu encontrar a chave privada associada à zona e, portanto, não poderá assinar novamente. diff --git a/bind8/lang/pt_BR.auto b/bind8/lang/pt_BR.auto index 03b0b076e..d46fcd89f 100644 --- a/bind8/lang/pt_BR.auto +++ b/bind8/lang/pt_BR.auto @@ -86,7 +86,6 @@ value_NSEC3PARAM1=Algoritmo de hash value_NSEC3PARAM2=Sinalizadores NSEC3 value_NSEC3PARAM3=Número de iterações de hash value_NSEC3PARAM4=Corda de sal -value_NSEC3PARAM4_none=None value_delegated=Zona delegada value_notdelegated=Outra zona value_spfip6s=Endereços IPv6 / redes adicionais do remetente permitido @@ -266,10 +265,6 @@ zonekey_publicfile=Arquivo de chave pública : $1 zonekey_privatefile=Arquivo de chave privada : $1 zonekey_algorithm=Algoritmo DNSSEC : $1 zonekey_ds=Registro do DS para a zona pai : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_eprivate=A chave privada associada a esta zona não pôde ser lida : $1 zonekey_keep=Manter a chave existente se o DNSSEC for reativado? diff --git a/bind8/lang/ro.auto b/bind8/lang/ro.auto index 18e15f4c0..5858ebc7d 100644 --- a/bind8/lang/ro.auto +++ b/bind8/lang/ro.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Algoritmul Hash value_NSEC3PARAM2=Steaguri NSEC3 value_NSEC3PARAM3=Număr de iterații hash value_NSEC3PARAM4=Sfoară de sare -value_NSEC3PARAM4_none=None value_delegated=Zona delegată value_notdelegated=Altă zonă value_other=Valori (una pe linie) @@ -1283,10 +1282,6 @@ zonekey_private=Detalii cheie privată : zonekey_privatefile=Fișier cheie privată : $1 zonekey_algorithm=Algoritm DNSSEC : $1 zonekey_ds=Înregistrare DS pentru zona părinte : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Afișați detaliile cheii de semnare a cheilor publice și private .. zonekey_expandzone=Afișați detaliile cheie ale zonei publice și private .. zonekey_noprivate=Cu toate acestea, Webmin nu a găsit cheia privată asociată zonei, astfel încât nu va putea să o rescrie. diff --git a/bind8/lang/ru.auto b/bind8/lang/ru.auto index fee1e3480..1a038760e 100644 --- a/bind8/lang/ru.auto +++ b/bind8/lang/ru.auto @@ -200,7 +200,6 @@ value_NSEC3PARAM1=Алгоритм хеширования value_NSEC3PARAM2=Флаги NSEC3 value_NSEC3PARAM3=Количество хеш-итераций value_NSEC3PARAM4=Соленая нить -value_NSEC3PARAM4_none=None value_delegated=Делегированная зона value_notdelegated=Другая зона value_other=Значения (по одному в строке) @@ -699,10 +698,6 @@ zonekey_private=Детали закрытого ключа : zonekey_privatefile=Файл закрытого ключа : $1 zonekey_algorithm=Алгоритм DNSSEC : $1 zonekey_ds=DS запись для родительской зоны : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Показать подробности открытых и закрытых ключей. zonekey_expandzone=Показать информацию о ключах открытых и закрытых зон .. zonekey_noprivate=Однако Webmin не смог найти закрытый ключ, связанный с зоной, и поэтому не сможет его повторно подписать. diff --git a/bind8/lang/sk.auto b/bind8/lang/sk.auto index 381912632..2a772a8d3 100644 --- a/bind8/lang/sk.auto +++ b/bind8/lang/sk.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Algoritmus hashovania value_NSEC3PARAM2=Vlajky NSEC3 value_NSEC3PARAM3=Počet iterácií hash value_NSEC3PARAM4=Soľná šnúra -value_NSEC3PARAM4_none=None value_delegated=Delegovaná zóna value_notdelegated=Iná zóna value_other=Hodnoty (jedna na riadok) @@ -1283,10 +1282,6 @@ zonekey_private=Podrobnosti o súkromnom kľúči : zonekey_privatefile=Súbor súkromného kľúča : $1 zonekey_algorithm=Algoritmus DNSSEC : $1 zonekey_ds=Záznam DS pre rodičovskú zónu : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Zobraziť podrobnosti verejného a súkromného kľúča na podpisovanie kľúčov .. zonekey_expandzone=Zobraziť podrobnosti o verejných a súkromných zónach .. zonekey_noprivate=Webmin však nemohol nájsť súkromný kľúč priradený k zóne, a preto ho nebude môcť znova podpísať. diff --git a/bind8/lang/sl.auto b/bind8/lang/sl.auto index 6de1b1139..da3472f5c 100644 --- a/bind8/lang/sl.auto +++ b/bind8/lang/sl.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Hash algoritem value_NSEC3PARAM2=Zastave NSEC3 value_NSEC3PARAM3=Število iteracij hash-a value_NSEC3PARAM4=Slana vrvica -value_NSEC3PARAM4_none=None value_delegated=Delegirano območje value_notdelegated=Druga cona value_other=Vrednosti (ena na vrstico) @@ -1283,10 +1282,6 @@ zonekey_private=Podrobnosti o zasebnem ključu : zonekey_privatefile=Datoteka z zasebnim ključem : $1 zonekey_algorithm=Algoritem DNSSEC : $1 zonekey_ds=DS zapis za matično cono : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Pokaži podrobnosti javnega in zasebnega ključa. zonekey_expandzone=Pokaži podrobnosti o javnih in zasebnih conah. zonekey_noprivate=Vendar Webmin zasebnega ključa, povezanega z območjem, ni mogel najti in zato ga ne bo mogel ponovno podpisati. diff --git a/bind8/lang/sv.auto b/bind8/lang/sv.auto index c747ea2de..b146ce3b2 100644 --- a/bind8/lang/sv.auto +++ b/bind8/lang/sv.auto @@ -120,7 +120,6 @@ value_NSEC3PARAM1=Hash-algoritm value_NSEC3PARAM2=NSEC3-flaggor value_NSEC3PARAM3=Antal hash-iterationer value_NSEC3PARAM4=Saltsträng -value_NSEC3PARAM4_none=None value_delegated=Delegerad zon value_notdelegated=Annan zon value_spfip6s=Ytterligare tillåtna avsändare IPv6-adresser / nätverk @@ -425,10 +424,6 @@ zonekey_private=Privat nyckeldetaljer : zonekey_privatefile=Privat nyckelfil : $1 zonekey_algorithm=DNSSEC-algoritm : $1 zonekey_ds=DS-post för överordnad zon : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Visa offentliga och privata nyckelsigneringsnyckeldetaljer .. zonekey_expandzone=Visa offentliga och privata zonnyckeldetaljer .. zonekey_noprivate=Webmin kunde dock inte hitta den privata nyckeln som är associerad med zonen och kommer därför inte att kunna underteckna den igen. diff --git a/bind8/lang/th.auto b/bind8/lang/th.auto index af789c958..a4a895cc5 100644 --- a/bind8/lang/th.auto +++ b/bind8/lang/th.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=อัลกอริทึมแฮช value_NSEC3PARAM2=ธง NSEC3 value_NSEC3PARAM3=จำนวนการทำซ้ำแฮช value_NSEC3PARAM4=เกลือป่น -value_NSEC3PARAM4_none=None value_delegated=เขตที่มอบหมาย value_notdelegated=โซนอื่น ๆ value_other=ค่า (หนึ่งต่อบรรทัด) @@ -1283,10 +1282,6 @@ zonekey_private=รายละเอียดรหัสส่วนตัว zonekey_privatefile=ไฟล์กุญแจส่วนตัว : $1 zonekey_algorithm=อัลกอริธึม DNSSEC : $1 zonekey_ds=ระเบียน DS สำหรับเขตปกครอง : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=แสดงรายละเอียดการเซ็นกุญแจคีย์สาธารณะและส่วนตัว .. zonekey_expandzone=แสดงรายละเอียดกุญแจสาธารณะและกุญแจส่วนตัวของโซน .. zonekey_noprivate=อย่างไรก็ตาม Webmin ไม่พบคีย์ส่วนตัวที่เกี่ยวข้องกับโซนดังนั้นจะไม่สามารถลงชื่ออีกครั้งได้ diff --git a/bind8/lang/tr.auto b/bind8/lang/tr.auto index a6f67fb51..a743e4641 100644 --- a/bind8/lang/tr.auto +++ b/bind8/lang/tr.auto @@ -122,7 +122,6 @@ value_NSEC3PARAM1=Karma algoritması value_NSEC3PARAM2=NSEC3 bayrakları value_NSEC3PARAM3=Karma yineleme sayısı value_NSEC3PARAM4=Tuz ipi -value_NSEC3PARAM4_none=None value_delegated=Yetki verilen bölge value_notdelegated=Diğer bölge value_spfip6s=İzin verilen ek gönderen IPv6 adresleri / ağları @@ -445,10 +444,6 @@ zonekey_private=Özel anahtar ayrıntıları : zonekey_privatefile=Özel anahtar dosyası : $1 zonekey_algorithm=DNSSEC algoritması : $1 zonekey_ds=Üst bölge için DS kaydı : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Herkese açık ve gizli anahtar imzalama anahtarı ayrıntılarını göster .. zonekey_expandzone=Genel ve özel bölge anahtarı ayrıntılarını göster .. zonekey_noprivate=Ancak, Webmin bölgeyle ilişkili özel anahtarı bulamadı ve bu nedenle yeniden imzalayamayacak. diff --git a/bind8/lang/uk.auto b/bind8/lang/uk.auto index 7d68094ce..616445707 100644 --- a/bind8/lang/uk.auto +++ b/bind8/lang/uk.auto @@ -200,7 +200,6 @@ value_NSEC3PARAM1=Алгоритм хешу value_NSEC3PARAM2=NSEC3 прапори value_NSEC3PARAM3=Кількість ітерацій хешу value_NSEC3PARAM4=Соляна струна -value_NSEC3PARAM4_none=None value_delegated=Делегована зона value_notdelegated=Інша зона value_other=Значення (по одному на рядок) @@ -699,10 +698,6 @@ zonekey_private=Деталі приватного ключа : zonekey_privatefile=Файл приватного ключа : $1 zonekey_algorithm=Алгоритм DNSSEC : $1 zonekey_ds=Запис DS для батьківської зони : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Показати подробиці відкритого та приватного ключа. zonekey_expandzone=Показати загальнодоступні та приватні деталі щодо зони. zonekey_noprivate=Однак Webmin не зміг знайти приватний ключ, пов’язаний із зоною, і тому не зможе повторно його підписати. diff --git a/bind8/lang/ur.auto b/bind8/lang/ur.auto index 2e75fbebd..cbba380e4 100644 --- a/bind8/lang/ur.auto +++ b/bind8/lang/ur.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=ہیش الگورتھم value_NSEC3PARAM2=این ایس ای سی 3 کے جھنڈے value_NSEC3PARAM3=ہیش تکرار کی تعداد value_NSEC3PARAM4=نمک کے تار -value_NSEC3PARAM4_none=None value_delegated=ڈیلیگیٹڈ زون value_notdelegated=دوسرا زون value_other=اقدار (ایک لائن ہر ایک) @@ -1283,10 +1282,6 @@ zonekey_private=نجی کلیدی تفصیلات : zonekey_privatefile=Private key file : $1 zonekey_algorithm=DNSSEC الگورتھم : $1 zonekey_ds=پیرنٹ زون کے لئے ڈی ایس ریکارڈ : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=عوامی اور نجی کلید دستخط کرنے والی کلیدی تفصیلات دکھائیں .. zonekey_expandzone=عوامی اور نجی زون کی کلیدی تفصیلات دکھائیں .. zonekey_noprivate=تاہم ، ویبمین زون سے وابستہ نجی کلید کو نہیں ڈھونڈ سکا ، اور اسی طرح اس پر دوبارہ دستخط کرنے کے قابل نہیں ہوگا۔ diff --git a/bind8/lang/vi.auto b/bind8/lang/vi.auto index 2f2ca838c..ff3055534 100644 --- a/bind8/lang/vi.auto +++ b/bind8/lang/vi.auto @@ -496,7 +496,6 @@ value_NSEC3PARAM1=Thuật toán băm value_NSEC3PARAM2=Cờ NSEC3 value_NSEC3PARAM3=Số lần lặp băm value_NSEC3PARAM4=Chuỗi muối -value_NSEC3PARAM4_none=None value_delegated=Khu ủy nhiệm value_notdelegated=Khu khác value_other=Giá trị (một trên mỗi dòng) @@ -1283,10 +1282,6 @@ zonekey_private=Chi tiết khóa riêng : zonekey_privatefile=Tệp khóa riêng : $1 zonekey_algorithm=Thuật toán DNSSEC : $1 zonekey_ds=Bản ghi DS cho vùng cha mẹ : -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=Hiển thị chi tiết khóa công khai và khóa riêng tư .. zonekey_expandzone=Hiển thị chi tiết khóa công khai và riêng tư .. zonekey_noprivate=Tuy nhiên, Webmin không thể tìm thấy khóa riêng được liên kết với vùng đó và do đó sẽ không thể ký lại. diff --git a/bind8/lang/zh.auto b/bind8/lang/zh.auto index 4490de7e1..a83bacfbf 100644 --- a/bind8/lang/zh.auto +++ b/bind8/lang/zh.auto @@ -184,7 +184,6 @@ value_NSEC3PARAM1=哈希算法 value_NSEC3PARAM2=NSEC3标志 value_NSEC3PARAM3=哈希迭代次数 value_NSEC3PARAM4=盐串 -value_NSEC3PARAM4_none=None value_delegated=委派区域 value_notdelegated=其他区域 value_other=值（每行一个） @@ -674,10 +673,6 @@ zonekey_private=私钥详细信息： zonekey_privatefile=私钥文件：$1 zonekey_algorithm=DNSSEC 算法 : $1 zonekey_ds=父区域的DS记录： -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=显示公共和私有密钥签名密钥的详细信息。 zonekey_expandzone=显示公共和私人区域密钥的详细信息 .. zonekey_noprivate=但是，Webmin找不到与该区域关联的私钥，因此将无法对其重新签名。 diff --git a/bind8/lang/zh_TW.auto b/bind8/lang/zh_TW.auto index 5ae9297f2..8acac1026 100644 --- a/bind8/lang/zh_TW.auto +++ b/bind8/lang/zh_TW.auto @@ -301,7 +301,6 @@ value_NSEC3PARAM1=哈希算法 value_NSEC3PARAM2=NSEC3標誌 value_NSEC3PARAM3=哈希迭代次數 value_NSEC3PARAM4=鹽串 -value_NSEC3PARAM4_none=None value_delegated=委派區域 value_notdelegated=其他區域 value_other=值（每行一個） @@ -955,10 +954,6 @@ zonekey_private=私鑰詳細信息： zonekey_privatefile=私鑰文件：$1 zonekey_algorithm=DNSSEC 算法 : $1 zonekey_ds=父區域的DS記錄： -zonekey_ds_keytag=Key tag -zonekey_ds_alg=Algorithm -zonekey_ds_type=Digest type -zonekey_ds_digest=Digest string zonekey_expandksk=顯示公共和私有密鑰簽名密鑰的詳細信息。 zonekey_expandzone=顯示公共和私有區域密鑰的詳細信息 .. zonekey_noprivate=但是，Webmin找不到與該區域關聯的私鑰，因此將無法對其重新簽名。 diff --git a/bsdexports/lang/de b/bsdexports/lang/de index dee8e03cd..d1bd620f0 100644 --- a/bsdexports/lang/de +++ b/bsdexports/lang/de @@ -49,4 +49,4 @@ save_enetmask='$1' ist keine gültige Netzmaske save_esame1=Das Verzeichnis $1 wird bereits an $2 exportiert. Ihr Betriebssystem erlaubt es nicht, Verzeichnisse im selben lokalen Dateisystem separat an denselben Host zu exportieren save_esame2=Das Verzeichnis $1 wird bereits an $2 exportiert. Ihr Betriebssystem erlaubt es nicht, Verzeichnisse im selben lokalen Dateisystem separat an dasselbe Netzwerk zu exportieren -restart_err=Fehler beim Anwenden der Änderungen +restart_err=Fehler beim Anwenden der Änderungen \ No newline at end of file diff --git a/bsdfdisk/lang/de b/bsdfdisk/lang/de index 1de00394a..16f6b1595 100644 --- a/bsdfdisk/lang/de +++ b/bsdfdisk/lang/de @@ -168,4 +168,4 @@ log_create_part=Partition $1 erstellt log_delete_part=Partition $1 gelöscht log_modify_part=Partition $1 geändert log_newfs_part=Dateisystem auf Partition $1 erstellt -log_fsck_part=Dateisystem auf Partition $1 überprüft +log_fsck_part=Dateisystem auf Partition $1 überprüft \ No newline at end of file diff --git a/burner/lang/af.auto b/burner/lang/af.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/af.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/ar.auto b/burner/lang/ar.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/ar.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/be.auto b/burner/lang/be.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/be.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/bg b/burner/lang/bg index 67bebdcfe..6ebbf61d9 100644 --- a/burner/lang/bg +++ b/burner/lang/bg @@ -14,7 +14,6 @@ index_global=Глобални опции index_ecdrecord=Командата за CD запис $1 не бе открита на вашата система. Вероятно не е инсталирана или вашата модулна конфигурация е грешна. index_return=списък на профили index_delete=Изтриване на избраните профили - edit_title=Промяна на профил на запис create_title=Създаване на профил на запис edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. @@ -50,7 +49,6 @@ edit_fly0=Използвай временен файл edit_srcdrv=Source device driver edit_dstdrv=Destination device driver edit_ecannot=Нямате права за редактиране на този профил за запис - save_err=Failed to save profile save_ename=Missing profile name save_eiso=Missing or invalid ISO image filename @@ -64,7 +62,6 @@ save_ecannot1=ISO имиджът не е в разрешена директор save_ecannot2=Изходната директория $1 не е в разрешена директория save_ecannot3=MP3 файлът или директорията $1 не е в разрешена директория save_ecannot4=Изходният файл за устройството не е в разрешена директория - burn_title=Burn CD burn_rutest1=Are you sure you want to test burning the ISO image $1 ? burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? @@ -102,7 +99,6 @@ burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. burn_seconddesc=Insert the blank destination CD and click the button below. burn_second=Burn Destination CD - dev_title=Device Options dev_header=CD burner device options dev_device=Burner device @@ -113,7 +109,6 @@ dev_extra=Extra cdrecord options dev_err=Failed to save device options dev_eother=Missing or invalid write speed dev_ecannot=Нямате права за редактиране на опциите на устройството - mkisofs_title=ISO Filesystem Options mkisofs_header=Global ISO filesystem options mkisofs_novers=Include version number in filenames? @@ -121,7 +116,6 @@ mkisofs_notrans=Allow all characters in filenames? mkisofs_nobak=Skip backup files? mkisofs_fsyms=Follow symbolic links? mkiofs_ecannot=Нямате права за редактиране на опциите на ISO файловата система - config_cdrecord=CD burning command config_mkisofs=ISO filesystem building command config_mpg123=MP3 decoding command @@ -135,7 +129,6 @@ config_empg123=Missing or invalid MP3 decoding command config_esox=Липсваща или невалидна SOX команда config_ecdrdao=Missing or invalid CD copying command config_etemp=Missing or invalid temporary file directory - acl_create=Може да създава нови профили за запис? acl_edit=Може да редактира съществуващи профили за запис acl_global=Може да редактира глобални настройки? @@ -143,6 +136,5 @@ acl_profiles=Може да използва профили acl_all=Всички acl_sel=Избраните по-долу .. acl_dirs=Позволи директории за изходни файлове - delete_err=Грешка при изтриването на профили за запис delete_enone=Няма избрани diff --git a/burner/lang/ca b/burner/lang/ca index b7d20cb1b..151680c56 100644 --- a/burner/lang/ca +++ b/burner/lang/ca @@ -14,7 +14,6 @@ index_global=Opcions Globals index_ecdrecord=No s'ha trobat al sistema l'ordre de gravació de CDs $1. Pot ser que no estigui instal·lada, o bé que la configuració del mòdul sigui incorrecta. index_return= a la llista de perfils index_delete=Suprimeix els Perfils Seleccionats - edit_title=Edició de Perfil de Gravació create_title=Creació de Perfil de Gravació edit_emkisofs=No s'ha trobat al sistema l'ordre de creació de sistemes de fitxers ISO $1. Pot ser que no estigui instal·lada, o bé que la configuració del mòdul sigui incorrecta. @@ -50,7 +49,6 @@ edit_fly0=Utilitza un fitxer temporal edit_srcdrv=Controlador del dispositiu font edit_dstdrv=Controlador del dispositiu destí edit_ecannot=No tens permís per editar aquest perfil de gravació - save_err=No s'ha pogut desar el perfil save_ename=Hi falta el nom del perfil save_eiso=Hi falta el nom del fitxer imatge ISO o bé és invàlid @@ -64,7 +62,6 @@ save_ecannot1=La imatge ISO no està en un directori permès save_ecannot2=El directori origen $1 no està en un directori permès save_ecannot3=El fitxer MP3 o directori $1 no està en un directori permès save_ecannot4=El fitxer de dispositiu origen no està en un directori permès - burn_title=Gravació de CD burn_rutest1=Segur que vols fer una prova de gravació de la imatge ISO $1? burn_rusure1=Segur que vols gravar la imatge ISO $1 al CD ? @@ -102,7 +99,6 @@ burn_807=Atenció! La mida total de les pistes fa $1 Mb, que està per damunt de burn_mp3size=Les pistes àudio convertides fan $1 Mb, d'un total de $2 Mb permesos en un CD àudio normal. burn_seconddesc=Insereix el CD en blanc de destí i fes clic sobre el botó de sota. burn_second=Grava el CD de destí - dev_title=Opcions de Dispositiu dev_header=Opcions de la gravadora de CDs dev_device=Gravadora @@ -113,7 +109,6 @@ dev_extra=Opcions extres de cdrecord dev_err=No s'han pogut desar les opcions del dispositiu dev_eother=Hi falta la velocitat de gravació o bé és invàlida dev_ecannot=No tens permís per editar les opcions del dispositiu - mkisofs_title=Opcions de Sistema de fitxers ISO mkisofs_header=Opcions globals del sistema de fitxers ISO mkisofs_novers=Inclou el número de la versió als noms de fitxers @@ -121,7 +116,6 @@ mkisofs_notrans=Permet tots els caràcters als noms de fitxers mkisofs_nobak=Omet fitxers de còpies de seguretat mkisofs_fsyms=Segueix els enllaços simbòlics mkiofs_ecannot=No tens permís per editar les opcions del sistema de fitxers ISO - config_cdrecord=Ordre de gravació de CDs config_mkisofs=Ordre de creació de sistemes de fitxers ISO config_mpg123=Ordre de descodificació MP3 @@ -135,7 +129,6 @@ config_empg123=Hi falta l'ordre de descodificació MP3 o bé és invàlida config_esox=Hi falta l'ordre de SOX o bé és invàlida config_ecdrdao=Hi falta l'ordre de còpia de CDs o bé és invàlida config_etemp=Hi falta el directori de fitxers temporals o bé és invàlid - acl_create=Pot crear nous perfils de gravació acl_edit=Pot editar perfils de gravació existents acl_global=Pot editar la configuració global @@ -143,6 +136,5 @@ acl_profiles=Pot utilitzar els perfils acl_all=Tots acl_sel=Els seleccionats a sota... acl_dirs=Permet els directoris per als fitxers origen - delete_err=No s'han pogut suprimir els perfils de gravació delete_enone=No has seleccionat cap perfil diff --git a/burner/lang/cs b/burner/lang/cs index e69afced7..12539e8f9 100644 --- a/burner/lang/cs +++ b/burner/lang/cs @@ -14,7 +14,6 @@ index_global=Globální nastavení index_ecdrecord=CD zapisovací příkaz $1 nebyl ve vašem systému nalezen. Možná není nainstalován, nebo vaše konfigurace modulu není správná. index_return=seznam profilů index_delete=Smazat vybrané profily - edit_title=Editace vypalovacího profilu create_title=Vytvoření vypalovacího profilu edit_emkisofs=Příkaz pro vytvoření ISO souborového systému $1 nebyl ve vašem systému nalezen. Možná není nainstalován, nebo vaše konfigurace modulu není správná. @@ -50,7 +49,6 @@ edit_fly0=Použit temp soubor edit_srcdrv=Ovladač zdrojového zařízení edit_dstdrv=Ovladač cílového zařízení edit_ecannot=Nemáte oprávnění upravovat vypalovací profil - save_err=Chyba při ukládání profilu save_ename=Chybějící název profilu save_eiso=Chybějící nebo nesprávný název souboru s ISO obrazem @@ -64,7 +62,6 @@ save_ecannot1=Obraz ISO není v přístupném adresáři save_ecannot2=Zdrojový adresář $1 není uvnitř přístupného adresáře save_ecannot3=MP3 soubor neb adresář $1 není v přístupném adresáři save_ecannot4=Soubor zdrojového zařízení není v přístupném adresáři - burn_title=Vypálení CD burn_rutest1=Skutečně chcete otestovat vypalování ISO obrazu $1 ? burn_rusure1=Skutečně chcete vypálit ISO obraz $1 na CD ? @@ -102,7 +99,6 @@ burn_807=Upozornění! Vaše zvukové stopy mají celkem velikost $1 MB, což je burn_mp3size=Konvertované zvukové stopy mají velikost $1 MB, přesahující celkových $2 MB, který je povolen na normální CD. burn_seconddesc=Vložte prázdné cílové CD a klepněte na níže uvedené tlačítko. burn_second=Vypálit cílové CD - dev_title=Nastavení cíle dev_header=Nastavení CD vypalovacího zařízení dev_device=Vypalovací zařízení @@ -113,7 +109,6 @@ dev_extra=Extra cdrecord nastavení dev_err=Chyba při ukládání nastavení zařízení dev_eother=Chybějící nebo nesprávná rychlost zápisu dev_ecannot=Nemáte oprávnění k úpravě voleb zařízení - mkisofs_title=Nastavení ISO souborového systému mkisofs_header=Globální nastavení ISO souborového systému mkisofs_novers=Zahrnout číslo verze do názvů souborů? @@ -121,7 +116,6 @@ mkisofs_notrans=Povolit všechny znaky v názvech souborů? mkisofs_nobak=Přeskočit záložní soubory? mkisofs_fsyms=Zahrnout i symbolické linky? mkiofs_ecannot=Nemáte oprávnění upravovat volby ISO souborového systému - config_cdrecord=Příkaz pro CD vypalování config_mkisofs=Příkaz pro vytvoření ISO souborového systému config_mpg123=Příkaz pro MP3 dekódování @@ -135,7 +129,6 @@ config_empg123=Chybějící nebo nesprávný příkaz pro MP3 dekódování config_esox=Chybějící nebo nesprávný SOX příkaz config_ecdrdao=Chybějící nebo nesprávný příkaz pro kopírování CD config_etemp=Chybějící nebo nesprávný adresář pro temp soubory - acl_create=Může vytvářet nové vypalovací profily? acl_edit=Může upravovat existující profily? acl_global=Může upravovat obecná nastavení? @@ -143,6 +136,5 @@ acl_profiles=Může použít profily acl_all=Všechno acl_sel=Níže vybrané .. acl_dirs=Povolit adresáře pro zdrojové soubory - delete_err=Chyba při mazání vypalovacích profilů delete_enone=Nic není vybráno diff --git a/burner/lang/da.auto b/burner/lang/da.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/da.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/de b/burner/lang/de index 9ad41b7f2..c27a6feaa 100644 --- a/burner/lang/de +++ b/burner/lang/de @@ -145,4 +145,4 @@ acl_sel=Unten ausgewählt .. acl_dirs=Verzeichnisse für Quelldateien erlauben delete_err=Löschen der Brennprofile fehlgeschlagen -delete_enone=Keine ausgewählt +delete_enone=Keine ausgewählt \ No newline at end of file diff --git a/burner/lang/el.auto b/burner/lang/el.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/el.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/es b/burner/lang/es index 2d3b75f81..660cb744a 100644 --- a/burner/lang/es +++ b/burner/lang/es @@ -11,7 +11,6 @@ index_none=No se han definido perfiles de grabación en este momento. index_global=Opciones Globales index_ecdrecord=El comando $1 para escribir CDs no fue hallado en su sistema. Quizás no está instalado o su configuración del módulo es incorrecta. index_return=lista de perfiles - edit_title=Editar Perfil de Grabación create_title=Crear Perfil de Grabación edit_emkisofs=El comando $1 de construcción de sistemas de archivo ISO no fue hallado en su sistema. Quizás no está instalado o su configuración del módulo es incorrecta. @@ -38,7 +37,6 @@ edit_return=perfil de grabación edit_ask=¿Pedir confirmación antes de grabar? edit_dstdrv=Driver de Dispositivo destivo edit_ecannot=No está autorizado a editar este perfil de grabación - save_err=No se pudo salvar perfil save_ename=Falta nombre de perfil save_eiso=Falta o no es válido nombre de archivo de imagen ISO @@ -47,7 +45,6 @@ save_edest=Falta directorio en CD para $1 save_edirs=No se han seleccionado directorios fuente save_emp3s=No se han introducido archivos MP3 o directorios save_emp3=Archivo MP3 o directorio '$1' no existe - burn_title=Grabar CD burn_rutest1=¿Está seguro de querer probar la grabación de la imagen ISO $1? burn_rusure1=¿Está seguro de querer grabar la imagen ISO $1 en CD? @@ -85,7 +82,6 @@ burn_807=¡Aviso!. Sus pistas de audio miden $1 MB que supera los 807 MB permiti burn_mp3size=Las pistas de audio convertidas miden $1 MB de un total de $2 MB que es lo permitido en un CD de audio. burn_seconddesc=Insertar el CD de destino en blanco y pulsar el botón. burn_second=Grabar CD Destino - dev_title=Opciones de Dispositivo dev_header=Opciones de grabadora de CDs dev_device=Grabadora @@ -96,14 +92,12 @@ dev_extra=Opciones extra de cdrecord dev_err=No se pudo salvar opciones de dispositivo dev_eother=Velocidad de escritura falta o no es válida dev_ecannot=No está autorizado a editar opciones de dispositivo - mkisofs_title=Opciones de Sistema de archivo ISO mkisofs_header=Opciones Globales de sistema de archivo ISO mkisofs_novers=¿Incluir el número de versión en nombres de archivo? mkisofs_notrans=¿Permitir todos los caracteres en nombres de archivo? mkisofs_nobak=¿Saltar los archivos de respaldo? mkisofs_fsyms=¿Seguir enlaces simbólicos? - config_cdrecord=Comando de grabación de CD config_mkisofs=Comando de construcción de un sistema de archivos ISO config_mpg123=Comando de decodificación MP3 @@ -117,7 +111,6 @@ config_empg123=Comando de decodificación de MP3 falta o no es válido config_esox=Comando SOX falta o no es válido config_ecdrdao=Comando de copia de CD falta o no es válido config_etemp=Directorio de archivo temporal falta o no es válido - acl_create=¿Puede crear nuevos perfiles de grabación? acl_edit=¿Puede editar perfiles de grabación existentes? acl_global=¿Puede editar configuraciones globales? diff --git a/burner/lang/es.auto b/burner/lang/es.auto deleted file mode 100644 index 9d9fb4f1f..000000000 --- a/burner/lang/es.auto +++ /dev/null @@ -1,24 +0,0 @@ -index_type4=Copy CD -index_noaccess=You do not have access to any burn profiles. -index_delete=Delete Selected Profiles - -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_netatalk=Include NETATALK Macintosh files? -edit_test2=Test Burn Now -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver - -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/eu.auto b/burner/lang/eu.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/eu.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/fa.auto b/burner/lang/fa.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/fa.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/fi.auto b/burner/lang/fi.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/fi.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/fr b/burner/lang/fr index f5673c5a6..f28a192b9 100644 --- a/burner/lang/fr +++ b/burner/lang/fr @@ -14,7 +14,6 @@ index_global=Options globales index_ecdrecord=La commande de gravure de CD $1 n'a pas été trouvée sur votre système. Peut-être n'est-elle pas installée, ou votre configuration de module est incorrecte. index_return=Liste des profils index_delete=Efface les Profiles Sélectionnes - edit_title=Editer le profil de gravure create_title=Créer le profil de gravure edit_emkisofs=La commande de construction d'un système de fichier ISO $1 n'a pas été trouvée sur votre système. Peut-être n'est-elle pas installée, ou votre configuration de module est incorrecte. @@ -50,7 +49,6 @@ edit_fly0=Utiliser un fichier temporaire edit_srcdrv=Pilote du lecteur source edit_dstdrv=Pilote du graveur edit_ecannot=Vous n'êtes pas autorisé à éditer ce profil de gravure - save_err=Echec à l'enregistrement du profil save_ename=Le nom du profil manque save_eiso=Le nom du fichier de l'image ISO manque ou est invalide @@ -64,7 +62,6 @@ save_ecannot1=Cette image ISO n'est pas dans un répertoire autorisé save_ecannot2=Le répertoire source $1 n'est pas dans un répertoire autorisé save_ecannot3=Le fichier MP3 ou le répertoire $1 n'est pas dans un répertoire autorisé save_ecannot4=Le ficher source du périphérique n'est pas dans un répertoire autorisé. - burn_title=Graver le CD burn_rutest1=Etes-vous certains de vouloir tester la gravure de l'image ISO $1 ? burn_rusure1=Etes-vous certains de vouloir graver l'image ISO $1 ? @@ -102,7 +99,6 @@ burn_807=Attention! Vos pistes audios occupent au total $1 MO , ce qui excède l burn_mp3size=Les pistes audio converties occupent $1 MO, sur les $2 MO autorisés sur un CD audio normal. burn_seconddesc=Insérer le CD vierge et cliquer sur le bouton ci-dessous. burn_second=Graver le CD - dev_title=Options des périphériques dev_header=Options du graveur dev_device=Graveur @@ -113,7 +109,6 @@ dev_extra=options supplémentaires pour cdrecord dev_err=Echec lors de l'enregistrement des options du graveur dev_eother=La vitesse de gravure manque ou est invalide dev_ecannot=Vous n'êtes pas autorisé à editer les options du graveur. - mkisofs_title=Options du système de fichier ISO mkisofs_header=Options globales du système de fichier ISO mkisofs_novers=Inclure le numéro de version dans le nom des fichiers? @@ -121,7 +116,6 @@ mkisofs_notrans=Autoriser tous les caractères dans les noms de fichiers? mkisofs_nobak=Sauter les fichiers de sauvegarde? mkisofs_fsyms=Suivre les liens symboliques? mkiofs_ecannot=Vous n'êtes pas autorisé à éditer les options du système de fichiers ISO - config_cdrecord=Commande de gravure de CD config_mkisofs=Commande de construction du système de fichier ISO config_mpg123=Commande de décompression MP3 @@ -135,7 +129,6 @@ config_empg123=Commande de décompression MP3 manquante ou invalide config_esox=Commande SOX invalide ou manquante. config_ecdrdao=Commande de copie de CD manquante ou invalide config_etemp=Répertoire temporaire de webmin manquant ou invalide - acl_create=Peut créer un nouveau profil de gravure? acl_edit=Peut éditer les profils de gravure existants? acl_global=Peut éditer les paramètres globaux? @@ -143,6 +136,5 @@ acl_profiles=Peut utiliser les profils acl_all=Tous acl_sel=Sélectionnés ci-dessous .. acl_dirs=Autoriser les répertoire pour les fichiers sources - delete_err=La suppression du profile de gravure a échouée delete_enone=Aucun(e) n'est sélectionnée diff --git a/burner/lang/he.auto b/burner/lang/he.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/he.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/hr b/burner/lang/hr index 2e87e37d9..6595ca7ff 100644 --- a/burner/lang/hr +++ b/burner/lang/hr @@ -14,7 +14,6 @@ index_global=Globalne Opcije index_ecdrecord=Naredba $1 za snimanje CD-a nije pronađena na Vašem sustavu. Možda nije instalirana ili Vaš konfiguracijski modul nije ispravana. index_return=lista profila index_delete=Izbriši Odabrane Profile - edit_title=Uredi Profil Snimanja create_title=Kreiraj Proces Snimanja edit_emkisofs=Naredba $1 za izgradnju sustava dokumenata nije pronađena u Vašem sustavu. Možda nije instalirana ili Vaš konfiguracijski modul nije ispravana. @@ -50,7 +49,6 @@ edit_fly0=Koristi trenutni direktorij edit_srcdrv=Izvorni pokretački program za uređaj edit_dstdrv=Pokretački program za uređaj za spremanje edit_ecannot=Nije Vam dopušteno uređivati ovj prfil za snimanje - save_err=Neuspjelo spremanje profila save_ename=Nedostaje naziv dokumenta save_eiso=Nepostojeći ili neispravan naziv dokumenta s ISO slikom @@ -64,7 +62,6 @@ save_ecannot1=ISO slika nije u dozvoljenom direktoriju save_ecannot2=Izvorni direktorij $1 nije dopuštenog direktorija save_ecannot3=MP dokument ili direktorij $1 nije unutar dopuštenog direktorija save_ecannot4=Izvorni dokument uređaja nije unutar dopuštenog direktorija - burn_title=Snimi CD burn_rutest1=Jeste li sigurni da želite testirati snimanje ISO slike $1 ? burn_rusure1=Jeste li sigurni da želite snimiti ISO sliku na CD ? @@ -102,7 +99,6 @@ burn_807=Upozorenje! Vaši audio zapisi imaju $1 MB, što je više od 746 MB koj burn_mp3size=Prebačeni audio zapisi su veličine $1 MB, što je više od $2 MB dopuštenih na normalnom audio CD-u. burn_seconddesc=Umetnite prazan CD za snimanje i kliknite na tipku iznad. burn_second=CD Za Snimanje - dev_title=Opcije Uređaja dev_header=Opcije CD uređaja za snimanje dev_device=Uređaj za snimanje @@ -113,7 +109,6 @@ dev_extra=Dodatno cdrecord opcije dev_err=Neuspjelo spremanje opcija uređaja dev_eother=Nedostaje ili neispravno vrijeme pisanaj dev_ecannot=Nije Vam dozvoljeno uređivati opcije uređaja - mkisofs_title=ISO Opcije Sustava Dokumenata mkisofs_header=Globalne ISO opcije sustava dokumenata mkisofs_novers=Uključi broj verzije u nazive dokumenata? @@ -121,7 +116,6 @@ mkisofs_notrans=Dopusti sve znakove u nazivu dokumenta? mkisofs_nobak=Preskoči sigurnosne kopije dokumenata? mkisofs_fsyms=Slijedi simbolične linkove? mkiofs_ecannot=Nije vam dopušteno uređivati ISO opcije sustava dokumenata - config_cdrecord=Naredba za brisanje CD-a config_mkisofs=Naredba za izgradnju ISO sustava dokumenata config_mpg123=Naredba za dekodiranje MP3-a @@ -135,7 +129,6 @@ config_empg123=Nepostojeća ili neispravna naredba za dekodiranje MP3-a config_esox=Nepostojeća ili neispravna SOX naredba config_ecdrdao=Nepostojeća ili neispravna naredba za kopiranje CD-a config_etemp=Nepostojeći ili neispravan direktorij za dokumente - acl_create=ne možete kreirati nove profile prženja? acl_edit=Ne možete urediti profile prženja? acl_global=Ne možete urediti globalne postavke? @@ -143,6 +136,5 @@ acl_profiles=Ne mogu koristiti profile acl_all=Sve acl_sel=Odabrano iznad .. acl_dirs=Dopusti direktorije za izvorne dokumente - delete_err=Neuspjelo brisanje profila snimanja delete_enone=Ništa nije odabrano diff --git a/burner/lang/hu b/burner/lang/hu index 0d9eabf00..54b9c6b2b 100644 --- a/burner/lang/hu +++ b/burner/lang/hu @@ -1,121 +1,115 @@ -index_title=CD-író -index_profiles=Írási profilok -index_name=Profilnév -index_type=Írás típusa -index_files=Kiírandó fájl(ok) -index_add=Új típusú profil hozzáadása: -index_type1=Egyedi ISO képfájl -index_type2=Fájlok és könyvtárak -index_type3=Audiosáv -index_type4=CD másolása -index_none=Jelenleg nincs megadva írási profil -index_global=Globális opciók -index_ecdrecord=A(z) $1 CD-író parancs nem találahtó a rendszeren. Előfordulhat, hogy még nincs telepítve, vagy a modul-konfiguráció helytelen. -index_return=Profillista - -edit_title=Írási profil szerkesztése -create_title=Írási profil létrehozása -edit_emkisofs=A(z) $1 ISO fájlrendszeralkotó parancs nem található a rendszeren. Előfordulhat, hogy nincs telepítve, vagy a modul-konfiguráció helytelen. -edit_empg123=A(z) $1 MP3 dekódoló parancs nem található a rendszeren. Előfordulhat, hogy nincs telepítve, vagy a modul-konfiguráció helytelen. -edit_ecdrdao=A(z) $1 CD másoló parancs nem található a rendszeren. Előfordulhat, hogy nincs telepítve, vagy a modul-konfiguráció helytelen. -edit_header=Írási profil opciók -edit_name=Profilnév -edit_iso=A kiírandó ISO képfájl -edit_isosize=Lekérdezi az ISO fájl méretét? -edit_dirs=Felveendő könyvtárak -edit_source=Forrásfájl vagy könyvtár -edit_dest=Könyvtár a CD-n -edit_rock=RockRidge (unix) kiterjesztéseket akar létrehozni? -edit_rock2=Igen, ésszerű engedélyekkel -edit_joliet=Joliet (windows) kiterjesztéseket akar létrehozni? -edit_long=Engedélyezi a hosszú fájlneveket? -edit_trans=Létrehozza a TRANS.TBL fájlt? -edit_volid=CD kötet ID -edit_mp3s=MP3 fájlok és könyvtárak -edit_burn=Mentés és azonnali írás -edit_test=Mentés és tesztírás -edit_return=Írási profil -edit_ask=Kér megerősítést az írás előtt? -edit_sdev=Forrás CD eszköz -edit_other=Más eszköz.. -edit_fly=Másolás üzemmód -edit_fly1=Közvetlenül a CD-ről az íróra -edit_fly0=Ideiglenes fájl használata -edit_srcdrv=A forrás eszközillesztője -edit_dstdrv=A cél eszközillesztője - -save_err=A profil mentése nem sikerült -save_ename=Hiányzó profilnév -save_eiso=Hiányzó vagy érvénytelen ISO képfájlnév -save_esource=Hiányzó vagy érvénytelen forráskönyvtár $1 -save_edest=Hiányzó könyvtár a CD-n a $1-hez -save_edirs=Nem választott ki forráskönyvtárat -save_emp3s=Nem választott ki MP3 fájlt vagy könyvtárat -save_emp3=A(z) $1 MP3 fájl vagy könyvtár nem létezik -save_eother=A forrás eszközillesztője nem létezik - -burn_title=CD kiírása -burn_rutest1=Biztos benne, hogy tesztelni akarja a(z) $1 ISO képfájl kiírását? -burn_rusure1=Biztos benne, hogy kiírja CD-re a(z) $1 ISO képfájlt? -burn_rutest2=Biztos benne, hogy tesztelni akarja a kiválasztott könyvtárak kiírását? -burn_rusure2=Biztos benne, hogy kiírja CD-re a kiválasztott könyvtárakat? -burn_rutest3=Biztos benne, hogy tesztelni akarja a kiválasztott audiosávok kiírását? -burn_rusure3=Biztos benne, hogy kiírja CD-re a kiválasztott audiosávokat? -burn_rusure4=Biztos benne, hogy $1-ről akar másolni? -burn_ok=Igen, írás indítása! -burn_cancel=Nem, töröljük az ideiglenes ISO képfájlt -burn_eject=CD kiadása az írás befejezésekor -burn_blank=Letörli a CD-t írás előtt? -burn_bfast=Gyors törlés -burn_ball=Teljes törlés -burn_bg=Írási folyamat indítása a háttérben -burn_edev=Nem írhat CD-t amíg az Eszközök beállításai oldalon ki nem választ egy CD-író eszközt. -burn_header=CD írása a(z) $1 paranccsal .. -burn_theader=Tesztírás a(z) $1 paranccsal .. -burn_header2=CD írása a háttérben a(z) $1 paranccsal .. -burn_theader2=Tesztírás a háttérben a(z) $1 paranccsal .. -burn_mheader=ISO fájlrendszer létrehozatala a(z) $1 paranccsal .. -burn_mfailed=Az ISO fájlrendszer létrehozatala sikertelen! -burn_egone=Az ISO képfájl törölve - Ismételt létrehozatalához térjen vissza az írási profil oldalra. -burn_egone2=Az ideiglenes audiosávok törölve - Ismételt létrehozatalukhoz térjen vissza az írási profil oldalra. -burn_700=Figyelem! Az ISO képfájl mérete $1 MB, ami még a 80 perces CD-kre írható 700 MB-ot is meghaladja. -burn_650=Figyelem! Az ISO képfájl mérete $1 MB, ami meghaladja a hagyományos CD-kre írható 650 MB-ot. Az adatok azonban elférnek egy 80 perces CD-n. -burn_size=A létrehozott ISO képfájl mérete $1 MB, a hagyományos CD-n megengedhető $2 MB-hoz képest. -burn_nomp3s=A kiválasztott könyvtárak üresek. -burn_mp3header=MP3 fájlok audiosávokká alakítása a(z) $1 paranccsal .. -burn_mp3failed=Az MP3 fájlok átalakítása sikertelen! -burn_mp3format=A(z) $1 fájl nem MP3 formátumú. -burn_746=Figyelem! Az audiosávok mérete $1 MB, ami meghaladja a hagyományos audio CD-kre írható 746 MB-ot. Az adatok azonban elférnek egy 80 perces CD-n. -burn_807=Figyelem! Az audiosávok mérete $1 MB, ami még a 80 perces audio CD-kre írható 807 MB-ot is meghaladja. -burn_mp3size=Az átalakított audiosávok mérete $1 MB, a hagyományos audio CD-n megengedhető $2 MB-hoz képest. -burn_seconddesc=Helyezze be az üres írható CD-t a meghajtóba, majd kattintson a lenti gombra. -burn_second=CD írása - -dev_title=Eszközök beállításai -dev_header=CD-író eszköz beállításai -dev_device=CD-író eszköz -dev_none=<Nincs kiválasztva> -dev_speed=Írási sebesség -dev_other=Egyéb.. -dev_extra=Extra cdrecord opciók -dev_err=Az eszköz beállításainak mentése sikertelen -dev_eother=Hiányzó vagy érvénytelen írási sebesség - -mkisofs_title=ISO fájlrendszer beállításai -mkisofs_header=ISO fájlrendszer globális beállításai -mkisofs_novers=Tartalmazzák a fájlnevek a verziószámot? -mkisofs_notrans=A fájlnevek bármilyen karaktert tartalmazhatnak? -mkisofs_nobak=Kihagyja a biztonsági fájlokat? -mkisofs_fsyms=Követi a szimbolikus hivatkozásokat? - -config_cdrecord=CD-író parancs -config_mkisofs=ISO fájlrendszeralkotó parancs -config_mpg123=MP3 dekódoló parancs -config_cdrdao=CD-másoló parancs -config_temp=Ideiglenes fájlok könyvtára -config_temp_def=A Webmin ideiglenes könyvtára -config_ecdrecord=Hiányzó vagy érvénytelen CD-író parancs -config_emkisofs=Hiányzó vagy érvénytelen ISO fájlrendszeralkotó parancs -config_empg123=Hiányzó vagy érvénytelen MP3 dekódoló parancs -config_ecdrdao=Hiányzó vagy érvénytelen CD-másoló parancs -config_etemp=Hiányzó vagy érvénytelen ideiglenes fájl könyvtár +index_title=CD-író +index_profiles=Írási profilok +index_name=Profilnév +index_type=Írás típusa +index_files=Kiírandó fájl(ok) +index_add=Új típusú profil hozzáadása: +index_type1=Egyedi ISO képfájl +index_type2=Fájlok és könyvtárak +index_type3=Audiosáv +index_type4=CD másolása +index_none=Jelenleg nincs megadva írási profil +index_global=Globális opciók +index_ecdrecord=A(z) $1 CD-író parancs nem találahtó a rendszeren. Előfordulhat, hogy még nincs telepítve, vagy a modul-konfiguráció helytelen. +index_return=Profillista +edit_title=Írási profil szerkesztése +create_title=Írási profil létrehozása +edit_emkisofs=A(z) $1 ISO fájlrendszeralkotó parancs nem található a rendszeren. Előfordulhat, hogy nincs telepítve, vagy a modul-konfiguráció helytelen. +edit_empg123=A(z) $1 MP3 dekódoló parancs nem található a rendszeren. Előfordulhat, hogy nincs telepítve, vagy a modul-konfiguráció helytelen. +edit_ecdrdao=A(z) $1 CD másoló parancs nem található a rendszeren. Előfordulhat, hogy nincs telepítve, vagy a modul-konfiguráció helytelen. +edit_header=Írási profil opciók +edit_name=Profilnév +edit_iso=A kiírandó ISO képfájl +edit_isosize=Lekérdezi az ISO fájl méretét? +edit_dirs=Felveendő könyvtárak +edit_source=Forrásfájl vagy könyvtár +edit_dest=Könyvtár a CD-n +edit_rock=RockRidge (unix) kiterjesztéseket akar létrehozni? +edit_rock2=Igen, ésszerű engedélyekkel +edit_joliet=Joliet (windows) kiterjesztéseket akar létrehozni? +edit_long=Engedélyezi a hosszú fájlneveket? +edit_trans=Létrehozza a TRANS.TBL fájlt? +edit_volid=CD kötet ID +edit_mp3s=MP3 fájlok és könyvtárak +edit_burn=Mentés és azonnali írás +edit_test=Mentés és tesztírás +edit_return=Írási profil +edit_ask=Kér megerősítést az írás előtt? +edit_sdev=Forrás CD eszköz +edit_other=Más eszköz.. +edit_fly=Másolás üzemmód +edit_fly1=Közvetlenül a CD-ről az íróra +edit_fly0=Ideiglenes fájl használata +edit_srcdrv=A forrás eszközillesztője +edit_dstdrv=A cél eszközillesztője +save_err=A profil mentése nem sikerült +save_ename=Hiányzó profilnév +save_eiso=Hiányzó vagy érvénytelen ISO képfájlnév +save_esource=Hiányzó vagy érvénytelen forráskönyvtár $1 +save_edest=Hiányzó könyvtár a CD-n a $1-hez +save_edirs=Nem választott ki forráskönyvtárat +save_emp3s=Nem választott ki MP3 fájlt vagy könyvtárat +save_emp3=A(z) $1 MP3 fájl vagy könyvtár nem létezik +save_eother=A forrás eszközillesztője nem létezik +burn_title=CD kiírása +burn_rutest1=Biztos benne, hogy tesztelni akarja a(z) $1 ISO képfájl kiírását? +burn_rusure1=Biztos benne, hogy kiírja CD-re a(z) $1 ISO képfájlt? +burn_rutest2=Biztos benne, hogy tesztelni akarja a kiválasztott könyvtárak kiírását? +burn_rusure2=Biztos benne, hogy kiírja CD-re a kiválasztott könyvtárakat? +burn_rutest3=Biztos benne, hogy tesztelni akarja a kiválasztott audiosávok kiírását? +burn_rusure3=Biztos benne, hogy kiírja CD-re a kiválasztott audiosávokat? +burn_rusure4=Biztos benne, hogy $1-ről akar másolni? +burn_ok=Igen, írás indítása! +burn_cancel=Nem, töröljük az ideiglenes ISO képfájlt +burn_eject=CD kiadása az írás befejezésekor +burn_blank=Letörli a CD-t írás előtt? +burn_bfast=Gyors törlés +burn_ball=Teljes törlés +burn_bg=Írási folyamat indítása a háttérben +burn_edev=Nem írhat CD-t amíg az Eszközök beállításai oldalon ki nem választ egy CD-író eszközt. +burn_header=CD írása a(z) $1 paranccsal .. +burn_theader=Tesztírás a(z) $1 paranccsal .. +burn_header2=CD írása a háttérben a(z) $1 paranccsal .. +burn_theader2=Tesztírás a háttérben a(z) $1 paranccsal .. +burn_mheader=ISO fájlrendszer létrehozatala a(z) $1 paranccsal .. +burn_mfailed=Az ISO fájlrendszer létrehozatala sikertelen! +burn_egone=Az ISO képfájl törölve - Ismételt létrehozatalához térjen vissza az írási profil oldalra. +burn_egone2=Az ideiglenes audiosávok törölve - Ismételt létrehozatalukhoz térjen vissza az írási profil oldalra. +burn_700=Figyelem! Az ISO képfájl mérete $1 MB, ami még a 80 perces CD-kre írható 700 MB-ot is meghaladja. +burn_650=Figyelem! Az ISO képfájl mérete $1 MB, ami meghaladja a hagyományos CD-kre írható 650 MB-ot. Az adatok azonban elférnek egy 80 perces CD-n. +burn_size=A létrehozott ISO képfájl mérete $1 MB, a hagyományos CD-n megengedhető $2 MB-hoz képest. +burn_nomp3s=A kiválasztott könyvtárak üresek. +burn_mp3header=MP3 fájlok audiosávokká alakítása a(z) $1 paranccsal .. +burn_mp3failed=Az MP3 fájlok átalakítása sikertelen! +burn_mp3format=A(z) $1 fájl nem MP3 formátumú. +burn_746=Figyelem! Az audiosávok mérete $1 MB, ami meghaladja a hagyományos audio CD-kre írható 746 MB-ot. Az adatok azonban elférnek egy 80 perces CD-n. +burn_807=Figyelem! Az audiosávok mérete $1 MB, ami még a 80 perces audio CD-kre írható 807 MB-ot is meghaladja. +burn_mp3size=Az átalakított audiosávok mérete $1 MB, a hagyományos audio CD-n megengedhető $2 MB-hoz képest. +burn_seconddesc=Helyezze be az üres írható CD-t a meghajtóba, majd kattintson a lenti gombra. +burn_second=CD írása +dev_title=Eszközök beállításai +dev_header=CD-író eszköz beállításai +dev_device=CD-író eszköz +dev_none=<Nincs kiválasztva> +dev_speed=Írási sebesség +dev_other=Egyéb.. +dev_extra=Extra cdrecord opciók +dev_err=Az eszköz beállításainak mentése sikertelen +dev_eother=Hiányzó vagy érvénytelen írási sebesség +mkisofs_title=ISO fájlrendszer beállításai +mkisofs_header=ISO fájlrendszer globális beállításai +mkisofs_novers=Tartalmazzák a fájlnevek a verziószámot? +mkisofs_notrans=A fájlnevek bármilyen karaktert tartalmazhatnak? +mkisofs_nobak=Kihagyja a biztonsági fájlokat? +mkisofs_fsyms=Követi a szimbolikus hivatkozásokat? +config_cdrecord=CD-író parancs +config_mkisofs=ISO fájlrendszeralkotó parancs +config_mpg123=MP3 dekódoló parancs +config_cdrdao=CD-másoló parancs +config_temp=Ideiglenes fájlok könyvtára +config_temp_def=A Webmin ideiglenes könyvtára +config_ecdrecord=Hiányzó vagy érvénytelen CD-író parancs +config_emkisofs=Hiányzó vagy érvénytelen ISO fájlrendszeralkotó parancs +config_empg123=Hiányzó vagy érvénytelen MP3 dekódoló parancs +config_ecdrdao=Hiányzó vagy érvénytelen CD-másoló parancs +config_etemp=Hiányzó vagy érvénytelen ideiglenes fájl könyvtár diff --git a/burner/lang/hu.auto b/burner/lang/hu.auto deleted file mode 100644 index 691ef418e..000000000 --- a/burner/lang/hu.auto +++ /dev/null @@ -1,33 +0,0 @@ -index_noaccess=You do not have access to any burn profiles. -index_delete=Delete Selected Profiles - -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_burn2=Burn Now -edit_test2=Test Burn Now -edit_ecannot=You are not allowed to edit this burn profile - -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. - -dev_ecannot=You are not allowed to edit device options - -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_sox=SOX command for WAV and OGG decoding -config_esox=Missing or invalid SOX command - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/it b/burner/lang/it index 48766e7c3..79be8c729 100644 --- a/burner/lang/it +++ b/burner/lang/it @@ -14,7 +14,6 @@ index_global=Opzioni globali index_ecdrecord=Il comando di scrittura CD $1 non è stato trovato nel tuo sistema. E' probabile che non sia installato o che la configurazione del modulo non sia corretta. index_return=Lista profili index_delete=Elimina il profilo selezionato - edit_title=Modifica il profilo di masterizzazione create_title=Crea profilo di masterizzazione edit_emkisofs=Il comando di generazione del filesystem ISO $1 non è stato trovato nel tuo sistema. E' probabile che non sia installato o che la configurazione del modulo non sia corretta. @@ -50,7 +49,6 @@ edit_fly0=Usa i file temporanei edit_srcdrv=Driver di dispositivo sorgente edit_dstdrv=Driver del dispositivo di destinazione edit_ecannot=Non hai i permessi per modificare questo profilo - save_err=Salvataggio del profilo fallito save_ename=Nome del profilo mancante save_eiso=Immagine ISO mancante o non valida @@ -64,7 +62,6 @@ save_ecannot1=L'immagine ISO non si trova in una directory permessa save_ecannot2=La directory sorgente $1 non si trova al di sotto di una directory permessa save_ecannot3=Il file MP3 o la directory $1 non si trova in una directory permessa save_ecannot4=Il file del dispositivo sorgente non si trova in una directory permessa - burn_title=Masterizza CD burn_rutest1=Sei sicuro di voler effettuare una prova di masterizzazione dell'immagine ISO $1? burn_rusure1=Sei sicuro di voler masterizzare l'immagine ISO $1? @@ -102,7 +99,6 @@ burn_807=Attenzione! Le tracce audio selezionate hanno una dimensione totale di burn_mp3size=Le tracce audio convertite hanno una dimensione di $1 MB, superiore di $2 MB rispetto a quanto consentito da un normale CD audio. burn_seconddesc=Inserisci il CD vuoto di destinazione e clicca sul pulsante in basso. burn_second=CD di destinazione - dev_title=Opzioni dispositivo dev_header=Opzioni del dispositivo di masterizzazione dev_device=Masterizzatore @@ -113,7 +109,6 @@ dev_extra=Opzioni extra di cdrecord dev_err=Salvataggio delle opzioni del dispositivo fallito dev_eother=Velocità di scrittura mancante o non valida dev_ecannot=Non hai i permessi per modificare le opzioni del dispositivo - mkisofs_title=Opzioni del filesystem ISO mkisofs_header=Opzioni globali del filesystem ISO mkisofs_novers=Includere il numero di versione nei nomi dei file? @@ -121,7 +116,6 @@ mkisofs_notrans=Permettere tutti i caratteri nei nomi dei file? mkisofs_nobak=Tralasciare i file di backup? mkisofs_fsyms=Segui i link simbolici? mkiofs_ecannot=Non hai i permessi per modificare le opzioni del filesystem ISO - config_cdrecord=Comando di masterizzazione CD config_mkisofs=Comando di generazione del filesystem ISO config_mpg123=Comando di decodifica MP3 @@ -135,7 +129,6 @@ config_empg123=Comando di decodifica MP3 mancante o non valido config_esox=Comando SOX mancante o non valido config_ecdrdao=Comando di copia CD mancante o non valido config_etemp=Directory per i file temporanei mancante o non valida - acl_create=Può creare nuovi profili di masterizzazione? acl_edit=Può modificare profili di masterizzazione esistenti? acl_global=Può modificare le impostazioni globali? @@ -143,6 +136,5 @@ acl_profiles=Può usare i profili acl_all=Tutti acl_sel=Selezionati sotto: acl_dirs=Permetti directory per i file sorgenti - delete_err=Cancellazione del profilo fallita delete_enone=Nessuna selezione diff --git a/burner/lang/ja b/burner/lang/ja index ba8356f95..0e73f7e9f 100644 --- a/burner/lang/ja +++ b/burner/lang/ja @@ -14,7 +14,6 @@ index_global=グローバルオプション index_ecdrecord=システムにCD書き込みコマンド$1が見つかりませんでした。 インストールされていないか、モジュール構成が正しくない可能性があります。 index_return=プロファイルリスト index_delete=選択したプロファイルを削除 - edit_title=Edit Burn Profile create_title=Create Burn Profile edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. @@ -50,7 +49,6 @@ edit_fly0=Use temporary file edit_srcdrv=Source device driver edit_dstdrv=Destination device driver edit_ecannot=You are not allowed to edit this burn profile - save_err=Failed to save profile save_ename=Missing profile name save_eiso=Missing or invalid ISO image filename @@ -64,7 +62,6 @@ save_ecannot1=The ISO image is not in an allowed directory save_ecannot2=The source directory $1 is not under an allowed directory save_ecannot3=The MP3 file or directory $1 is not in an allowed directory save_ecannot4=The source device file is not in an allowed directory - burn_title=Burn CD burn_rutest1=Are you sure you want to test burning the ISO image $1 ? burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? @@ -102,7 +99,6 @@ burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. burn_seconddesc=Insert the blank destination CD and click the button below. burn_second=Burn Destination CD - dev_title=Device Options dev_header=CD burner device options dev_device=Burner device @@ -113,7 +109,6 @@ dev_extra=Extra cdrecord options dev_err=Failed to save device options dev_eother=Missing or invalid write speed dev_ecannot=You are not allowed to edit device options - mkisofs_title=ISO Filesystem Options mkisofs_header=Global ISO filesystem options mkisofs_novers=Include version number in filenames? @@ -121,7 +116,6 @@ mkisofs_notrans=Allow all characters in filenames? mkisofs_nobak=Skip backup files? mkisofs_fsyms=Follow symbolic links? mkiofs_ecannot=You are not allowed to edit ISO filesystem options - config_cdrecord=CD burning command config_mkisofs=ISO filesystem building command config_mpg123=MP3 decoding command @@ -135,7 +129,6 @@ config_empg123=Missing or invalid MP3 decoding command config_esox=Missing or invalid SOX command config_ecdrdao=Missing or invalid CD copying command config_etemp=Missing or invalid temporary file directory - acl_create=Can create new burn profiles? acl_edit=Can edit existing burn profiles? acl_global=Can edit global settings? @@ -143,6 +136,5 @@ acl_profiles=Can use profiles acl_all=All acl_sel=Selected below .. acl_dirs=Allow directories for source files - delete_err=Failed to delete burn profiles delete_enone=None selected diff --git a/burner/lang/ko.auto b/burner/lang/ko.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/ko.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/lt.auto b/burner/lang/lt.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/lt.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/lv.auto b/burner/lang/lv.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/lv.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/ms b/burner/lang/ms index db79dd562..df4de7ac3 100644 --- a/burner/lang/ms +++ b/burner/lang/ms @@ -14,7 +14,6 @@ index_global=Pilihan Global index_ecdrecord=Arahan untuk menulis CD $1 tidak dijumpai pada sistem anda. Mungkin ia tidak dipasang, atau konfigurasi modul anda adalah tidak betul. index_return=Senarai profil index_delete=Padam Profil Terpilih - edit_title=Sunting Profil Membakar create_title=Cipta Profile Membakar edit_emkisofs=Arahan untuk membina sistem fail ISO $1 tidak dijumpai pada sistem anda. Mungkin ia tidak dipasang, atau konfigurasi modul ada adalah tidak betul. @@ -50,7 +49,6 @@ edit_fly0=Gunakan fail sementara edit_srcdrv=Sumber pemandu peranti edit_dstdrv=Destinasi pemandu peranti edit_ecannot=Anda tidak dibenarkan untuk menyunting profil membakar ini - save_err=Gagal untuk menyimpan profil save_ename=Hilang nama profil save_eiso=Hilang atau nama fail imej ISO tidak sah @@ -64,7 +62,6 @@ save_ecannot1=Imej ISO dalam direktori yang tidak dibenarkan save_ecannot2=Direktori sumber $1 adalah di bawah direktori yang tidak dibenarkan save_ecannot3=Fail MP3 atau direktori $1 adalah dalam direktori yang tidak dibenarkan save_ecannot4=Fail peranti sumber dalam direktori yang tidak dibenarkan - burn_title=Membakar CD burn_rutest1=Adakah anda pasti anda mahu menguji membakar imej ISO $1 ? burn_rusure1=Adakah anda pasti anda mahu membakar imej ISO $1 ke CD ? @@ -102,7 +99,6 @@ burn_807=Amaran! Trek audio anda berjumlah $1 MB dalam saiz, yang melebihi 807 M burn_mp3size=Saiz trek audio yang ditukar sebanyak $1MB, iaitu daripada sejumlah $2 MB yang dibenarkan pada CD audio biasa. burn_seconddesc=Masukkan destinasi CD kosong dan klik butang di bawah. burn_second=Bakar Destinasi CD - dev_title=Pilihan peranti dev_header=Pilihan peranti pembakar CD dev_device=Peranti pembakar @@ -113,7 +109,6 @@ dev_extra=Tambahan pilihan cdrecord dev_err=Gagal menyimpan pilihan peranti dev_eother=Hilang atau kelajuan tulis tidak sah dev_ecannot=Anda tidak dibenarkan untuk menyunting pilihan peranti - mkisofs_title=Pilihan Sistem fail ISO mkisofs_header=Pilihan global sistem fail ISO mkisofs_novers=Termasuk nombor versi dalam nama fail? @@ -121,7 +116,6 @@ mkisofs_notrans=Benarkan semua aksara dalam nama fail? mkisofs_nobak=Langkau fail backup? mkisofs_fsyms=Ikut pautan simbolik? mkiofs_ecannot=Anda tidak dibenarkan untuk menyunting pilihan sistem fail ISO - config_cdrecord=Arahan CD membakar config_mkisofs=Arahan membina sistem fail ISO config_mpg123=Arahan menyahkod MP3 @@ -135,7 +129,6 @@ config_empg123=Hilang atau arahan penyahkodan MP3 tidak sah config_esox=Hilang atau arahan SOX tidak sah config_ecdrdao=Hilang atau arahan menyalin CD tidak sah config_etemp=Hilang atau direktori fail sementara tidak sah - acl_create=Boleh cipta profil membakar baharu? acl_edit=Boleh menyunting profil membakar sedia ada? acl_global=Boleh menyunting tetapan global? @@ -143,6 +136,5 @@ acl_profiles=Boleh guna profil acl_all=Semua acl_sel=Dipilih di bawah .. acl_dirs=Benarkan direktori untuk fail sumber - delete_err=Gagal untuk memadam profil membakar delete_enone=Tiada dipilih diff --git a/burner/lang/mt.auto b/burner/lang/mt.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/mt.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/nl b/burner/lang/nl index dfcf4f854..437f233e6 100644 --- a/burner/lang/nl +++ b/burner/lang/nl @@ -14,7 +14,6 @@ index_global=Globale Opties index_ecdrecord=De CD schrijf opdracht $1 is niet gevonden op uw systeem. Misschien is het niet geinstalleerd, of uw module configuratie is niet in orde. index_return=profielen lijst index_delete=Verwijder Geselecteerde Profielen - edit_title=Bewerk brand profile create_title=Maak een brand profiel edit_emkisofs=De maak-filesysteem-ISO opdracht $1 is niet gevonden op uw systeem. Misschien is het niet geinstalleerd, of uw module configuratie is niet in orde. @@ -50,7 +49,6 @@ edit_fly0=Gebruik tijdelijk file edit_srcdrv=Bron apparaat driver edit_dstdrv=Driver bestemming's apparaat edit_ecannot=U bent niet bevoegd om dit brand profiel te bewerken - save_err=Mislukt om profiel op te slaan save_ename=Ontbrekende profiel naam save_eiso=Ontbrekende of ongeldige ISO image filenaam @@ -64,7 +62,6 @@ save_ecannot1=De ISO image zit niet in een toegestane directory save_ecannot2=De bron directory $1 zit niet onder een toegestane directory save_ecannot3=De MP3 file of directory $1 zit niet onder een toegestane directory save_ecannot4=De apparaat file zit niet in een toegestane directory - burn_title=Brand CD burn_rutest1=Weet u zeker dat u een brand-test wilt doen met de ISO image $1 ? burn_rusure1=Weet u zeker dat u de ISO image $1 naar CD wilt branden ? @@ -102,7 +99,6 @@ burn_807=Waarschuwing! Uw audio track's is $1 MB in grote, wat groter is dan de burn_mp3size=De geconverteerde audio track's zijn $1 MB in grote, van het totaal van $2 MB wat is toegestaan op een normale audio CD. burn_seconddesc=Stop een blanke Bestemming CD in het apparaat en klik op de knop hieronder. burn_second=Brand Bestemming CD - dev_title=Apparaat Opties dev_header=CD brander apparaat opties dev_device=Brander apparaat @@ -113,7 +109,6 @@ dev_extra=Extra cd-opneem opties dev_err=Mislukt om apparaat opties op te slaan dev_eother=Ontbrekende of ongeldige schrijf snelheid dev_ecannot=U bent niet bevoegd om apparaat opties te bewerken - mkisofs_title=ISO Filesysteem Opties mkisofs_header=Globale ISO filesysteem opties mkisofs_novers=Inclusief versie nummers in filenamen? @@ -121,7 +116,6 @@ mkisofs_notrans=Sta karakters toe in filenamen? mkisofs_nobak=Backup files overslaan? mkisofs_fsyms=Volg symbolische links? mkiofs_ecannot=U bent niet bevoegd om ISO filesysteem opties te bewerken - config_cdrecord=CD brand opdracht config_mkisofs=Commando om een filesysteem ISO te maken config_mpg123=MP3 decoder opdracht @@ -135,7 +129,6 @@ config_empg123=Ontbrekende of ongeldig MP3 decoder opdracht config_esox=Ontbrekende of ongeldig SOX opdracht config_ecdrdao=Ontbrekende of ongeldig CD kopieer opdracht config_etemp=Ontbrekende of ongeldige tijdelijke file directory - acl_create=Mag een nieuw brand profiel aanmaken? acl_edit=Mag een bestaande brand profielen bewerken? acl_global=Mag globale settings bewerken? @@ -143,6 +136,5 @@ acl_profiles=Mag gebruik maken van profielen acl_all=Alles acl_sel=Hieronder geselecteerd .. acl_dirs=Directory's toestaan voor source files - delete_err=Mislukt om brandprofiel te verwijderen delete_enone=Niets geselecteerd diff --git a/burner/lang/no b/burner/lang/no index b5a2f89a2..5a1c05a1a 100644 --- a/burner/lang/no +++ b/burner/lang/no @@ -14,7 +14,6 @@ index_global=Globale innstillinger index_ecdrecord=Kommandoen for skriving av CD, $1, ble ikke funnet på systemet ditt. Kanskje den ikke er installert, eller så er modulkonfigurasjonen feil. index_return=liste med profiler index_delete=Slett valgte profiler - edit_title=Rediger brenner-profil create_title=Opprett brenner-profil edit_emkisofs=Kommandoen for bygging av ISO filsystem, $1, ble ikke funnet på systemet ditt. Kanskje den ikke er installert, eller så er modulkonfigurasjonen feil. @@ -50,7 +49,6 @@ edit_fly0=Bruk midlertidig fil edit_srcdrv=Kilde enhetsdriver edit_dstdrv=Enhetsdriver for mål edit_ecannot=Du har ikke tilgang til å redigere denne brenner-profilen - save_err=Kunne ikke lagre profil save_ename=Manglende profil-navn save_eiso=Manglende eller ugyldig ISO image filnavn @@ -64,7 +62,6 @@ save_ecannot1=ISO avbildingen er ikke i en tillatt katalog save_ecannot2=Kildekatalogen $1 ligger ikke under en tillatt katalog save_ecannot3=MP3 filen eller katalogen $1 er ikke en tillatt katalog save_ecannot4=Enhetsfilen for kilde-enheten er ikke i en tillatt katalog - burn_title=Brenn CD burn_rutest1=Er du sikker på at du ønsker å teste brenning av ISO avbildingen $1 ? burn_rusure1=Er du sikker på at du ønsker å brenne ISO avbildningen $1 til CD ? @@ -102,7 +99,6 @@ burn_807=Advarsel! Lydsporene dine har en total størrelse på $1 MB, som er ove burn_mp3size=De konverterte lydsporene har en størrelse på $1 MB, av totalt $2 MB som er tillatt på en normal lyd-CD. burn_seconddesc=Sett inn en blank mål-CD og klikk på knappen nedenfor. burn_second=Brenn mål-CD - dev_title=Enhetsinnstillinger dev_header=CD brenner enhetsinnstillinger dev_device=Brenner-enhet @@ -113,7 +109,6 @@ dev_extra=Ekstra cdrecord innstillinger dev_err=Kunne ikke lagre innstillinger for enhet dev_eother=Manglende eller ugyldig skrive-hastighet dev_ecannot=Du har ikke tilgang til å redigere innstillinger for enhet - mkisofs_title=Innstillinger for ISO filsystem mkisofs_header=Globale innstillinger for ISO filsystem mkisofs_novers=Ta med versjonsnummer i filnavn? @@ -121,7 +116,6 @@ mkisofs_notrans=Tillat alle tegn i filnavn? mkisofs_nobak=Hopp over sikkerhetskopi-filer? mkisofs_fsyms=Følg symbolske lenker? mkiofs_ecannot=Du har ikke tilgang til å redigere innstillinger for ISO filsystem - config_cdrecord=CD brennekommando config_mkisofs=Bygge-kommando for ISO filsystem config_mpg123=MP3 dekoding kommando @@ -135,7 +129,6 @@ config_empg123=Manglende eller ugyldig MP3 dekoding kommando config_esox=Manglende eller ugyldig SOX kommando config_ecdrdao=Manglende eller ugyldig CD kopieringskommando config_etemp=Manglende eller ugyldig midlertidig filkatalog - acl_create=Kan opprette nye brenner-profiler? acl_edit=Kan redigere eksisterende brenner-profiler? acl_global=Kan redigere globale innstillinger? @@ -143,6 +136,5 @@ acl_profiles=Kan bruke profiler acl_all=Alle acl_sel=Valgt nedenfor .. acl_dirs=Tillat kataloger for kildefiler - delete_err=Kunne ikke slette brenner-profiler delete_enone=Ingen valgt diff --git a/burner/lang/pl b/burner/lang/pl index 2ac02178c..51a87e849 100644 --- a/burner/lang/pl +++ b/burner/lang/pl @@ -14,7 +14,6 @@ index_global=Opcje globalne index_ecdrecord=Brak komendy nagrywania CD $1 w systemie. Możliwe że nie jest zainstalowana, albo konfiguracja modułu jest niepoprawna. index_return=listy profili index_delete=Usuń wybrane profile - edit_title=Edytuj profil nagrywania create_title=Utwórz profil nagrywania edit_emkisofs=Nie znaleziono komendy budowania systemu plików ISO $1 w systemie. Możliwe że nie jest zainstalowana, albo konfiguracja modułu jest niepoprawna. @@ -50,7 +49,6 @@ edit_fly0=Użyj pliku tymczasowego edit_srcdrv=Sterownik urządzenia źródłowego edit_dstdrv=Sterownik urządzenia docelowego edit_ecannot=Nie masz uprawnień do edycji tego profilu nagrywania - save_err=Błąd zapisywania profilu save_ename=Brakująca nazwa profilu save_eiso=Braująa lub nieprawidłowa nazwa pliku ISO @@ -64,7 +62,6 @@ save_ecannot1=Brak Obrazu ISO w dozwolonym katalogu save_ecannot2=Brak katalogu źródłowego $1 w dozwolonym katalogu save_ecannot3=Brak pliku MP3 lub katalogu $1 w dozwolonym katalogu save_ecannot4=Brak pliku źródłowego urządzenia w dozwolonym katalogu - burn_title=Nagraj CD burn_rutest1=Czy chcesz przetestować narywanie obrazu ISO $1 ? burn_rusure1=Czy chcesz nagrać obraz ISO $1 na CD? @@ -102,7 +99,6 @@ burn_807=Ostrzeżenie! Całkowity rozmiar ścieżek audio to $1, który jest wi burn_mp3size=Przekonwertowane ścieżki audio mają $1 MB, co oznacza, że jest to o $2 MB za dużo w stosunku do normalnego CD audio. burn_seconddesc=Włóż pusty nośnik CD i kliknij poniższy przycisk. burn_second=Nagraj docelowe CD - dev_title=Opcje urządzenia dev_header=Opcje urządzenia nagrywającego CD dev_device=Urządzenie nagrywające @@ -113,7 +109,6 @@ dev_extra=Dodatkowe opcje cdrecord dev_err=Błąd zapisywania opcji urządzenia dev_eother=Brakująca lub nieprawidłowa szybkość nagrywania dev_ecannot=Nie masz uprawnień do edytowania opcji urządzenia - mkisofs_title=Opcje systemu plików ISO mkisofs_header=Globalne opcje systemu pliów ISO mkisofs_novers=Uwzględnić numer wersji w nazwach plików? @@ -121,7 +116,6 @@ mkisofs_notrans=Pozwolić na dowolne znaki w nazwach plików? mkisofs_nobak=Pominąć pliki kopii zapasowej? mkisofs_fsyms=Wykorzystać łącza symboliczne? mkiofs_ecannot=Nie masz uprawnień do edycji opcji systemu plików ISO - config_cdrecord=Komenda nagrywania CD config_mkisofs=Komenda budowania systemu plików ISO config_mpg123=Komeda dekodowania MP3 @@ -135,7 +129,6 @@ config_empg123=Brakująca lub nieprawidłowa komenda dekodowania MP3 config_esox=Brakująca lub nieprawidłowa komenda SOX config_ecdrdao=Brakująca lub nieprawidłowa komenda CD config_etemp=Brakujący lub nieprwidłowy katalog plików tymczasowych - acl_create=Może tworzyć profile nagrywania? acl_edit=Może edytować istniejące profile nagrywania? acl_global=Może edytować ustawienia globalne? @@ -143,6 +136,5 @@ acl_profiles=Może używać profilach acl_all=Wszystkie acl_sel=Wybrane poniżej .. acl_dirs=Dozwolone katalogi dla plików źródłowych - delete_err=Błęd usuwania profili nagrywania delete_enone=Nie wybrano diff --git a/burner/lang/pt.auto b/burner/lang/pt.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/pt.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/pt_BR b/burner/lang/pt_BR index d9dcd741a..9471c9795 100644 --- a/burner/lang/pt_BR +++ b/burner/lang/pt_BR @@ -12,7 +12,6 @@ index_none=Nenhum perfil de gravação foi definido. index_global=Opções Globais index_ecdrecord=O comando de gravação de CD $1 não foi encontrado em seu sistema. Talvez ele não esteja instalado, ou sua configuração do módulo está incorreta. index_return=lista de perfis - edit_title=Editar perfil de gravação create_title=Criar um perfil de gravação edit_emkisofs=O comando para gerar sistemas de arquivo ISO $1 não foi encontrado em seu sistema. Talvez ele não esteja instalado, ou a sua configuração de módulo está incorreta. @@ -43,7 +42,6 @@ edit_fly1=Direto do CD para gravação edit_fly0=Usar arquivo temporário edit_srcdrv=Driver do dispositivo fonte edit_dstdrv=Driver do dispositivo de destino - save_err=Falha ao salvar perfil save_ename=Nome do perfil faltando save_eiso=Arquivo ISO inválido ou faltando @@ -53,7 +51,6 @@ save_edirs=Não foram escolhidos diretórios de origem save_emp3s=Não foram escolhidos arquivos MP3 ou diretórios save_emp3=O arquivo MP3 ou diretório '$1' não existe save_eother=Arquivo do dispositivo de origem não existe - burn_title=Gravar CD burn_rutest1=Você tem certeza que quer testar a gravação da imagem ISO $1 ? burn_rusure1=Você tem certeza que quer gravar a imagem ISO $1 em CD ? @@ -88,7 +85,6 @@ burn_mp3format=O arquivo $1 não parece estar no formato MP3. burn_746=Atenção! Suas trilhas de audio tem o tamanho de $1 MB, que está além do total de 746 MB permitido em um CD comum de audio. Entretando, caberá em um CD de 80 minutos. burn_807=Atenção! Suas trilhas de audio tem o tamanho de $1 MB, que está além do total de 807 MB permitido em um CD de 80 minutos. burn_mp3size=As trilhas de audio convertidas tem o tamanho de $1 MB, de um total de $2 MB que é permitido em um CD comum de audio. - dev_title=Opções do dispositivo dev_header=Opções do dispositivo de gravação de CD dev_device=Dispositivo de gravação @@ -98,14 +94,12 @@ dev_other=Outra.. dev_extra=Opções extra do cdrecord dev_err=Falha ao salvar as opções do dispositivo dev_eother=Velocidade de gravação invalida ou faltando - mkisofs_title=Opções do sistema de arquivos ISO mkisofs_header=Opções globais do sistema de arquivos ISO mkisofs_novers=Incluir o número da versão no nome dos arquivos? mkisofs_notrans=Permitir todos os caracteres no nome dos arquivos? mkisofs_nobak=Pular arquivos de backup? mkisofs_fsyms=Seguir links simbólicos? - config_cdrecord=Comando para gravar CD config_mkisofs=Comando para gerar sistemas de arquivo ISO config_mpg123=Comando para decodificar MP3 diff --git a/burner/lang/pt_BR.auto b/burner/lang/pt_BR.auto deleted file mode 100644 index 220f7886c..000000000 --- a/burner/lang/pt_BR.auto +++ /dev/null @@ -1,35 +0,0 @@ -index_noaccess=You do not have access to any burn profiles. -index_delete=Delete Selected Profiles - -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_burn2=Burn Now -edit_test2=Test Burn Now -edit_ecannot=You are not allowed to edit this burn profile - -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_ecannot=You are not allowed to edit device options - -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_sox=SOX command for WAV and OGG decoding -config_esox=Missing or invalid SOX command - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/ro.auto b/burner/lang/ro.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/ro.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/ru b/burner/lang/ru index 3cb10ad79..2f5ae027f 100644 --- a/burner/lang/ru +++ b/burner/lang/ru @@ -12,7 +12,6 @@ index_none=В данный момент нет ни одного проекта. index_global=Общие настройки index_ecdrecord=Команда $1, используемая для записи на компакт-диск, на вашей системе не обнаружена. Возможно, она не установлена или неверна конфигурация модуля. index_return=списку проектов - edit_title=Изменение проекта записи create_title=Создание проекта записи edit_emkisofs=Команда $1, используемая для создания файловой системы ISO на вашей системе не обнаружена. Возможно, она не установлена или не верна конфигурация модуля. @@ -43,7 +42,6 @@ edit_fly1=Напрямую с компакт-диска edit_fly0=Через временный файл edit_srcdrv=Драйвер устройства-источника edit_dstdrv=Драйвер устройства назначения - save_err=Не удалось сохранить проект save_ename=Не указано названия проекта save_eiso=Имя файла ISO-образа не указано или указано неверно @@ -53,7 +51,6 @@ save_edirs=Не выбрано ни одного исходного катало save_emp3s=Не указано файлов или каталогов с файлами MP3 save_emp3=Файл или каталог с файлами MP3 '$1' не существует save_eother=Файл устройства-источника не существует - burn_title=Запись компакт-диска burn_rutest1=Вы уверены, что хотите проверить запись ISO-образа $1 ? burn_rusure1=Вы уверены, что хотите записать ISO-образ $1 на компакт-диск ? @@ -90,7 +87,6 @@ burn_807=Внимание! Суммарный объем ваших аудио- burn_mp3size=Объем преобразованных аудио-треков составляет $1 Мб из $2 Мб, помещающихся на обычный компакт-диск. burn_seconddesc=Вставьте чистый компакт-диск и нажмите кнопку ниже. burn_second=Записать компакт-диска - dev_title=Настройка устройства dev_header=Настройка устройства для записи на компакт-диски dev_device=Устройство @@ -100,14 +96,12 @@ dev_other=Прочее.. dev_extra=Дополнительные настройки cdrecord dev_err=Не удалось сохранить настройки устройства dev_eother=Скорость записи не указана или указана неверно - mkisofs_title=Настройка файловой системы ISO mkisofs_header=Общая настройка файловой системы ISO mkisofs_novers=Включать номер версии в имена файлов? mkisofs_notrans=Разрешить использование в именах файлов всех символов? mkisofs_nobak=Пропускать резервные копии файлов? mkisofs_fsyms=Следовать по символьным ссылкам? - config_cdrecord=Команда записи на компакт-диск config_mkisofs=Команда создания файловой системы ISO config_mpg123=Команда декодирования MP3 diff --git a/burner/lang/ru.auto b/burner/lang/ru.auto deleted file mode 100644 index 691ef418e..000000000 --- a/burner/lang/ru.auto +++ /dev/null @@ -1,33 +0,0 @@ -index_noaccess=You do not have access to any burn profiles. -index_delete=Delete Selected Profiles - -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_burn2=Burn Now -edit_test2=Test Burn Now -edit_ecannot=You are not allowed to edit this burn profile - -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. - -dev_ecannot=You are not allowed to edit device options - -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_sox=SOX command for WAV and OGG decoding -config_esox=Missing or invalid SOX command - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/sk b/burner/lang/sk index 68daa34d5..308664554 100644 --- a/burner/lang/sk +++ b/burner/lang/sk @@ -1,13 +1,10 @@ index_title=Napaľovačka index_name=Meno profilu - edit_name=Meno profilu edit_dest=Adresár na CD edit_trans=Vytvoriť súbory TRANS.TBL? edit_burn2=Napáliť - save_err=Uloženie profilu zlyhalo - burn_title=Napálenie CD burn_ok=Napáliť teraz! burn_eject=Vysunúť CD po napálení @@ -15,10 +12,8 @@ burn_blank=Vymazať CD pred napaľovaním? burn_bfast=Rýchle mazanie burn_ball=Pomalé mazanie burn_bg=Začať napaľovanie na pozadí - dev_device=Napaľovačka dev_speed=Rýchlosť zápisu - acl_create=Môže vytvoriť nový profil napaľovania? acl_profiles=Môže použiť profily acl_all=Všetky diff --git a/burner/lang/sk.auto b/burner/lang/sk.auto deleted file mode 100644 index 7386435b1..000000000 --- a/burner/lang/sk.auto +++ /dev/null @@ -1,129 +0,0 @@ -index_profiles=Burn Profiles -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_cancel=No, so delete temporary ISO -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_none=<None selected> -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/sl.auto b/burner/lang/sl.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/sl.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/sv b/burner/lang/sv index 338c46a20..c307cf6e2 100644 --- a/burner/lang/sv +++ b/burner/lang/sv @@ -14,7 +14,6 @@ index_global=Globala Inställningar index_ecdrecord=CD skrivar kommandot $1 hittades inte på ditt system. Kanske den inte är installerad, eller din a href='$2'>modul konfiguration är felaktig. index_return=profil lista index_delete=Ta Bort Valda Profiler - edit_title=Ändra Bränn Profil create_title=Skapa Bränn Profil edit_emkisofs=ISO filsystems byggar kommando $1 hittades inte på ditt system. Kanske den inte är installerad, eller din modul konfiguration är felaktig. @@ -50,7 +49,6 @@ edit_fly0=Använd tillfälliga filer edit_srcdrv=Käll enhets drivrutiner edit_dstdrv=Destinations enhets drivrutiner edit_ecannot=Du är inte tillåten att ändra denna brännar profil - save_err=Misslyckades att spara profil save_ename=Saknad profil namn save_eiso=Saknad eller felaktig ISO bild filnamn @@ -64,7 +62,6 @@ save_ecannot1=ISO bilden är inte i en tillåten sökväg save_ecannot2=Käll sökvägen $1 är inte i en tillåten sökväg save_ecannot3=MP3 filen eller sökvägen $1 är inte i en tillåten sökväg save_ecannot4=Käll enhetens fil är inte i en tillåten sökväg - burn_title=Bränn CD burn_rutest1=Är du söker att du vill test bränna ISO bilden $1? burn_rusure1=Är du söker att du vill bränna ISO bilden $1 till CD? @@ -102,7 +99,6 @@ burn_807=Varning! Dina ljud spårs storlek är $1 MB, som är över 807 MB till burn_mp3size=De konverterade ljud spåren är $1 MB stor, utav totalt $2 som är tillåten på en normal ljud CD. burn_seconddesc=Sätt i en blank CD och klicka på knappen under. burn_second=Bränn CD - dev_title=Enhets Inställningar dev_header=CD brännar enhets inställningar dev_device=Brännar enhet @@ -113,7 +109,6 @@ dev_extra=Extra cdrecord inställningar dev_err=Misslyckades att spara enhets inställningar dev_eother=Saknad eller felaktig bränn hastighet dev_ecannot=Du är inte tillåten att ändra enhets inställningar - mkisofs_title=ISO filsystems inställningar mkisofs_header=Global ISO filsystems inställningar mkisofs_novers=Inkludera versions nummer i fil namnen? @@ -121,7 +116,6 @@ mkisofs_notrans=Tillåt alla symboler i filnamn? mkisofs_nobak=Hoppa över backup filer? mkisofs_fsyms=Följ symboliska länkar? mkiofs_ecannot=Du är inte tillåten att ändra ISO filsystem inställningar - config_cdrecord=CD brännings kommando config_mkisofs=ISO filsystem skapar kommando config_mpg123=MP3 dekoder kommando @@ -135,7 +129,6 @@ config_empg123=Sakand eller felaktig MP3 dekoder kommando config_esox=Saknad eller felaktig SOX kommando config_ecdrdao=Saknad eller felaktig CD kopierings kommando config_etemp=Saknad eller felaktig tillfällig fil sökväg - acl_create=Kan skapa ny bränn profil? acl_edit=Kan ändra existerande bränn profiler? acl_global=Kan Ändra global inställningar? @@ -143,6 +136,5 @@ acl_profiles=Kan använda profiler acl_all=Alla acl_sel=Valda nedanför .. acl_dirs=Tillåt sökväg för käll filer - delete_err=Misslyckades att ta bort bränn profiler delete_enone=Inget valt diff --git a/burner/lang/th.auto b/burner/lang/th.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/th.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/tr.auto b/burner/lang/tr.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/tr.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/uk b/burner/lang/uk index 2fb4c8ae0..95f7185a4 100644 --- a/burner/lang/uk +++ b/burner/lang/uk @@ -1,121 +1,115 @@ -index_title=Запис на компакт-диски -index_profiles=Проекти запису -index_name=Назва проекту -index_type=Тип запису -index_files=Записувані файли -index_add=Додати новий проект: -index_type1=Одиночний ISO-образ -index_type2=Файли і каталоги -index_type3=Аудіо-треки -index_type4=Копія компакт-диску -index_none=У даний момент немає жодного проекту. -index_global=Загальні настроювання -index_ecdrecord=Команда $1, використовувана для запису на компакт-диск, на вашій системі не виявлена. Можливо, вона чи не встановлена невірна конфігурація модуля. -index_return=списку проектів - -edit_title=Зміна проекту запису -create_title=Створення проекту запису -edit_emkisofs=Команда $1, використовувана для створення файлової системи ISO на вашій системі не виявлена. Можливо, вона чи не встановлена не вірна конфігурація модуля. -edit_empg123=Команда $1, використовувана для декодування MP3, на вашій системі не виявлена. Можливо, вона чи не встановлена не вірна конфігурація модуля. -edit_ecdrdao=Команда $1, використовувана для копіювання компакт-дисків, на вашій системі не виявлена. Можливо, вона чи не встановлена не вірна конфігурація модуля. -edit_header=Настроювання проекту запису -edit_name=Назва проекту -edit_iso=Записуваний ISO-образ -edit_isosize=Брати розмір з файлу? -edit_dirs=Записувані каталоги -edit_source=Вихідний чи файл каталог -edit_dest=Каталог на компакт-диску -edit_rock=Використовувати розширення RockRidge (unix)? -edit_rock2=Так, з розумними правами -edit_joliet=Використовувати розширення Joliet (windows)? -edit_long=Дозволити довгі імена? -edit_trans=Створювати файл TRANS.TBL? -edit_volid=Мітка тому CD -edit_mp3s=Файли і каталоги з файлами MP3 -edit_burn=Зберегти і записати зараз -edit_test=Зберегти і перевірити запис зараз -edit_return=проекту запису -edit_ask=Запитувати підтвердження перед записом? -edit_sdev=Пристрій з вихідним компакт-диском -edit_other=Інший пристрій.. -edit_fly=Режим копіювання -edit_fly1=Прямо з компакт-диску -edit_fly0=Через тимчасовий файл -edit_srcdrv=Драйвер устрою-джерела -edit_dstdrv=Драйвер пристрою призначення - -save_err=Не удалося зберегти проект -save_ename=Не зазначено назви проекту -save_eiso=Ім'я файлу ISO-образа чи не зазначене зазначено невірно -save_esource=Вихідний каталог $1 чи не зазначений зазначений невірно -save_edest=Каталог на компакт-диску для $1 чи не зазначений зазначений невірно -save_edirs=Не обрано жодного вихідного каталогу -save_emp3s=Не зазначено чи файлів каталогів з файлами MP3 -save_emp3= чиФайл каталог з файлами MP3 '$1' не існує -save_eother=Файл устрою-джерела не існує - -burn_title=Запис компакт-диску -burn_rutest1=Ви упевнені, що хочете перевірити запис ISO-образа $1 ? -burn_rusure1=Ви упевнені, що хочете записати ISO-образ $1 на компакт-диск ? -burn_rutest2=Ви упевнені, що хочете перевірити запис обраних каталогів ? -burn_rusure2=Ви упевнені, що хочете записати обрані каталоги на компакт-диск ? -burn_rutest3=Ви упевнені, що хочете перевірити запис обраних аудіо-треков ? -burn_rusure3=Ви упевнені, що хочете записати обрані аудіо-треки на компакт-диск ? -burn_rusure4=Ви упевнені, що хочете копіювати $1 ? -burn_ok=Так, записати зараз! -burn_cancel=Ні, видалити тимчасовий ISO -burn_eject=Витягти компакт-диск після запису -burn_blank=Очистити компакт-диск перед записом? -burn_bfast=Швидке очищення -burn_ball=Повільне очищення -burn_bg=Запустити процес запису у фоновому режимі -burn_edev=Перед записом на компакт-диск необхідно настроїти пристрій для запису на сторінці Настроювання пристрою. -burn_header=Запис компакт-диску за допомогою команди $1 .. -burn_theader=Перевірка запису за допомогою команди $1 .. -burn_header2=Запис на компакт-диск у фоновому режимі за допомогою команди $1 .. -burn_theader2=Перевірка запису у фоновому режимі за допомогою команди $1 .. -burn_mheader=Створення файлової системи ISO за допомогою команди $1 .. -burn_mfailed=Не удалося створити файлову систему ISO! -burn_egone=ISO-образ був вилучений. Щоб створити його заново, необхідно повернутися до проекту запису. -burn_egone2=Тимчасові аудіо-треки були вилучені. Для того, щоб створити їхній заново, необхідно повернутися до проекту запису. -burn_700=Увага! Розмір вашого ISO-образа складає $1 Мб, що перевищує максимальний розмір навіть 80-хвилинного компакт-диску (700 Мб). -burn_650=Увага! Розмір вашого ISO-образа складає $1 Мб, що перевищує максимальний розмір звичайного компакт-диску (650 Мб). Проте, ваш образ поміститься на 80-хвилинний компакт-диск. -burn_size=Створений ISO-образ має розмір у $1 Мб із $2 MB, що містяться на звичайний компакт-диск. -burn_nomp3s=В обраних каталогах немає файлів. -burn_mp3header=Перетворення файлів MP3 в аудіо-треки за допомогою команди $1 .. -burn_mp3failed=Не удалося перетворити файли MP3! -burn_mp3format=Файл $1 не є файлом у форматі MP3. -burn_746=Увага! Сумарний обсяг ваших аудіо-треків складає $1 Мб, що перевищує максимальний обсяг звичайний компакт-диск (746 Мб). Проте, ваші аудіо-треки помістяться на 80-хвилинний компакт-диск. -burn_807=Увага! Сумарний обсяг ваших аудіо-треків складає $1 Мб, що перевищує навіть максимальний обсяг 80-хвилинного компакт-диску (807 Мб). -burn_mp3size=Обсяг перетворених аудіо-треків складає $1 Мб із $2 Мб, що містяться на звичайний компакт-диск. -burn_seconddesc=Уставте чистий компакт-диск і натисніть кнопку нижче. -burn_second=Записати компакт-диску - -dev_title=Настроювання пристрою -dev_header=Настроювання пристрою для запису на компакт-диски -dev_device=Пристрій -dev_none=<Не обрано> -dev_speed=Швидкість запису -dev_other=Інше.. -dev_extra=Додаткові настроювання cdrecord -dev_err=Не удалося зберегти настроювання пристрою -dev_eother=Швидкість запису чи не зазначена зазначена невірно - -mkisofs_title=Настроювання файлової системи ISO -mkisofs_header=Загальне настроювання файлової системи ISO -mkisofs_novers=Включати номер версії в імена файлів? -mkisofs_notrans=Дозволити використання в іменах файлів усіх символів? -mkisofs_nobak=Пропускати резервні копії файлів? -mkisofs_fsyms=Випливати по символьних посиланнях? - -config_cdrecord=Команда запису на компакт-диск -config_mkisofs=Команда створення файлової системи ISO -config_mpg123=Команда декодування MP3 -config_cdrdao=Команда копіювання компакт-диску -config_temp=Каталог для тимчасових файлів -config_temp_def=Тимчасовий каталог Webmin -config_ecdrecord=Команда запису на компакт-диск чи не зазначена зазначена невірно -config_emkisofs=Команда створення файлової системи ISO чи не зазначена зазначена невірно -config_empg123=Команда декодування MP3 чи не зазначена зазначена невірно -config_ecdrdao=Команда копіювання компакт-диску чи не зазначена зазначена невірно -config_etemp=Каталог для тимчасових файлів чи не зазначений зазначений невірно +index_title=Запис на компакт-диски +index_profiles=Проекти запису +index_name=Назва проекту +index_type=Тип запису +index_files=Записувані файли +index_add=Додати новий проект: +index_type1=Одиночний ISO-образ +index_type2=Файли і каталоги +index_type3=Аудіо-треки +index_type4=Копія компакт-диску +index_none=У даний момент немає жодного проекту. +index_global=Загальні настроювання +index_ecdrecord=Команда $1, використовувана для запису на компакт-диск, на вашій системі не виявлена. Можливо, вона чи не встановлена невірна конфігурація модуля. +index_return=списку проектів +edit_title=Зміна проекту запису +create_title=Створення проекту запису +edit_emkisofs=Команда $1, використовувана для створення файлової системи ISO на вашій системі не виявлена. Можливо, вона чи не встановлена не вірна конфігурація модуля. +edit_empg123=Команда $1, використовувана для декодування MP3, на вашій системі не виявлена. Можливо, вона чи не встановлена не вірна конфігурація модуля. +edit_ecdrdao=Команда $1, використовувана для копіювання компакт-дисків, на вашій системі не виявлена. Можливо, вона чи не встановлена не вірна конфігурація модуля. +edit_header=Настроювання проекту запису +edit_name=Назва проекту +edit_iso=Записуваний ISO-образ +edit_isosize=Брати розмір з файлу? +edit_dirs=Записувані каталоги +edit_source=Вихідний чи файл каталог +edit_dest=Каталог на компакт-диску +edit_rock=Використовувати розширення RockRidge (unix)? +edit_rock2=Так, з розумними правами +edit_joliet=Використовувати розширення Joliet (windows)? +edit_long=Дозволити довгі імена? +edit_trans=Створювати файл TRANS.TBL? +edit_volid=Мітка тому CD +edit_mp3s=Файли і каталоги з файлами MP3 +edit_burn=Зберегти і записати зараз +edit_test=Зберегти і перевірити запис зараз +edit_return=проекту запису +edit_ask=Запитувати підтвердження перед записом? +edit_sdev=Пристрій з вихідним компакт-диском +edit_other=Інший пристрій.. +edit_fly=Режим копіювання +edit_fly1=Прямо з компакт-диску +edit_fly0=Через тимчасовий файл +edit_srcdrv=Драйвер устрою-джерела +edit_dstdrv=Драйвер пристрою призначення +save_err=Не удалося зберегти проект +save_ename=Не зазначено назви проекту +save_eiso=Ім'я файлу ISO-образа чи не зазначене зазначено невірно +save_esource=Вихідний каталог $1 чи не зазначений зазначений невірно +save_edest=Каталог на компакт-диску для $1 чи не зазначений зазначений невірно +save_edirs=Не обрано жодного вихідного каталогу +save_emp3s=Не зазначено чи файлів каталогів з файлами MP3 +save_emp3= чиФайл каталог з файлами MP3 '$1' не існує +save_eother=Файл устрою-джерела не існує +burn_title=Запис компакт-диску +burn_rutest1=Ви упевнені, що хочете перевірити запис ISO-образа $1 ? +burn_rusure1=Ви упевнені, що хочете записати ISO-образ $1 на компакт-диск ? +burn_rutest2=Ви упевнені, що хочете перевірити запис обраних каталогів ? +burn_rusure2=Ви упевнені, що хочете записати обрані каталоги на компакт-диск ? +burn_rutest3=Ви упевнені, що хочете перевірити запис обраних аудіо-треков ? +burn_rusure3=Ви упевнені, що хочете записати обрані аудіо-треки на компакт-диск ? +burn_rusure4=Ви упевнені, що хочете копіювати $1 ? +burn_ok=Так, записати зараз! +burn_cancel=Ні, видалити тимчасовий ISO +burn_eject=Витягти компакт-диск після запису +burn_blank=Очистити компакт-диск перед записом? +burn_bfast=Швидке очищення +burn_ball=Повільне очищення +burn_bg=Запустити процес запису у фоновому режимі +burn_edev=Перед записом на компакт-диск необхідно настроїти пристрій для запису на сторінці Настроювання пристрою. +burn_header=Запис компакт-диску за допомогою команди $1 .. +burn_theader=Перевірка запису за допомогою команди $1 .. +burn_header2=Запис на компакт-диск у фоновому режимі за допомогою команди $1 .. +burn_theader2=Перевірка запису у фоновому режимі за допомогою команди $1 .. +burn_mheader=Створення файлової системи ISO за допомогою команди $1 .. +burn_mfailed=Не удалося створити файлову систему ISO! +burn_egone=ISO-образ був вилучений. Щоб створити його заново, необхідно повернутися до проекту запису. +burn_egone2=Тимчасові аудіо-треки були вилучені. Для того, щоб створити їхній заново, необхідно повернутися до проекту запису. +burn_700=Увага! Розмір вашого ISO-образа складає $1 Мб, що перевищує максимальний розмір навіть 80-хвилинного компакт-диску (700 Мб). +burn_650=Увага! Розмір вашого ISO-образа складає $1 Мб, що перевищує максимальний розмір звичайного компакт-диску (650 Мб). Проте, ваш образ поміститься на 80-хвилинний компакт-диск. +burn_size=Створений ISO-образ має розмір у $1 Мб із $2 MB, що містяться на звичайний компакт-диск. +burn_nomp3s=В обраних каталогах немає файлів. +burn_mp3header=Перетворення файлів MP3 в аудіо-треки за допомогою команди $1 .. +burn_mp3failed=Не удалося перетворити файли MP3! +burn_mp3format=Файл $1 не є файлом у форматі MP3. +burn_746=Увага! Сумарний обсяг ваших аудіо-треків складає $1 Мб, що перевищує максимальний обсяг звичайний компакт-диск (746 Мб). Проте, ваші аудіо-треки помістяться на 80-хвилинний компакт-диск. +burn_807=Увага! Сумарний обсяг ваших аудіо-треків складає $1 Мб, що перевищує навіть максимальний обсяг 80-хвилинного компакт-диску (807 Мб). +burn_mp3size=Обсяг перетворених аудіо-треків складає $1 Мб із $2 Мб, що містяться на звичайний компакт-диск. +burn_seconddesc=Уставте чистий компакт-диск і натисніть кнопку нижче. +burn_second=Записати компакт-диску +dev_title=Настроювання пристрою +dev_header=Настроювання пристрою для запису на компакт-диски +dev_device=Пристрій +dev_none=<Не обрано> +dev_speed=Швидкість запису +dev_other=Інше.. +dev_extra=Додаткові настроювання cdrecord +dev_err=Не удалося зберегти настроювання пристрою +dev_eother=Швидкість запису чи не зазначена зазначена невірно +mkisofs_title=Настроювання файлової системи ISO +mkisofs_header=Загальне настроювання файлової системи ISO +mkisofs_novers=Включати номер версії в імена файлів? +mkisofs_notrans=Дозволити використання в іменах файлів усіх символів? +mkisofs_nobak=Пропускати резервні копії файлів? +mkisofs_fsyms=Випливати по символьних посиланнях? +config_cdrecord=Команда запису на компакт-диск +config_mkisofs=Команда створення файлової системи ISO +config_mpg123=Команда декодування MP3 +config_cdrdao=Команда копіювання компакт-диску +config_temp=Каталог для тимчасових файлів +config_temp_def=Тимчасовий каталог Webmin +config_ecdrecord=Команда запису на компакт-диск чи не зазначена зазначена невірно +config_emkisofs=Команда створення файлової системи ISO чи не зазначена зазначена невірно +config_empg123=Команда декодування MP3 чи не зазначена зазначена невірно +config_ecdrdao=Команда копіювання компакт-диску чи не зазначена зазначена невірно +config_etemp=Каталог для тимчасових файлів чи не зазначений зазначений невірно diff --git a/burner/lang/uk.auto b/burner/lang/uk.auto deleted file mode 100644 index 691ef418e..000000000 --- a/burner/lang/uk.auto +++ /dev/null @@ -1,33 +0,0 @@ -index_noaccess=You do not have access to any burn profiles. -index_delete=Delete Selected Profiles - -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_burn2=Burn Now -edit_test2=Test Burn Now -edit_ecannot=You are not allowed to edit this burn profile - -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. - -dev_ecannot=You are not allowed to edit device options - -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_sox=SOX command for WAV and OGG decoding -config_esox=Missing or invalid SOX command - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/ur.auto b/burner/lang/ur.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/ur.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/vi.auto b/burner/lang/vi.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/vi.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/zh.auto b/burner/lang/zh.auto deleted file mode 100644 index ff8d2d3f8..000000000 --- a/burner/lang/zh.auto +++ /dev/null @@ -1,148 +0,0 @@ -index_title=CD Burner -index_profiles=Burn Profiles -index_name=Profile name -index_type=Burn type -index_files=File(s) to write -index_add=Add new profile of type: -index_type1=Single ISO image -index_type2=Files and directories -index_type3=Audio tracks -index_type4=Copy CD -index_none=No burn profiles are currently defined. -index_noaccess=You do not have access to any burn profiles. -index_global=Global Options -index_ecdrecord=The CD writing command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_return=profiles list -index_delete=Delete Selected Profiles - -edit_title=Edit Burn Profile -create_title=Create Burn Profile -edit_emkisofs=The ISO filesystem building command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_empg123=The MP3 decoding command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_ecdrdao=The CD copying command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -edit_header=Burn profile options -edit_name=Profile name -edit_iso=ISO image to write -edit_isosize=Get size from ISO file? -edit_dirs=Directories to include -edit_source=Source file or directory -edit_dest=Directory on CD -edit_rock=Generate RockRidge (unix) extensions? -edit_rock2=Yes, with sensible permissions -edit_joliet=Generate Joliet (windows) extensions? -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_long=Allow long filenames? -edit_trans=Generate TRANS.TBL file? -edit_volid=CD volume ID -edit_mp3s=MP3 files and directories -edit_burn=Save and Burn Now -edit_burn2=Burn Now -edit_test=Save and Test Burn Now -edit_test2=Test Burn Now -edit_return=burn profile -edit_ask=Ask for confirmation before burning? -edit_sdev=Source CD device -edit_other=Other device.. -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_err=Failed to save profile -save_ename=Missing profile name -save_eiso=Missing or invalid ISO image filename -save_esource=Missing or invalid source directory $1 -save_edest=Missing directory on CD for $1 -save_edirs=No source directories chosen -save_emp3s=No MP3 files or directories entered -save_emp3=MP3 file or directory '$1' does not exist -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_title=Burn CD -burn_rutest1=Are you sure you want to test burning the ISO image $1 ? -burn_rusure1=Are you sure you want to burn the ISO image $1 to CD ? -burn_rutest2=Are you sure you want to test burning the chosen directories ? -burn_rusure2=Are you sure you want to burn the chosen directories to CD ? -burn_rutest3=Are you sure you want to test burning the chosen audio tracks ? -burn_rusure3=Are you sure you want to burn the chosen audio tracks to CD ? -burn_rusure4=Are you sure you want to copy from $1 ? -burn_ok=Yes, burn now! -burn_cancel=No, so delete temporary ISO -burn_eject=Eject CD after burning -burn_blank=Blank CD before burning? -burn_bfast=Fast blank -burn_ball=Slow blank -burn_bg=Start burn process in background -burn_edev=You cannot burn a CD until a CD-write device has been configured on the Device Options page. -burn_header=Burning CD with command $1 .. -burn_theader=Testing burn with command $1 .. -burn_header2=Burning CD in background process with command $1 .. -burn_theader2=Testing burn in background process with command $1 .. -burn_mheader=Making ISO filesystem with command $1 .. -burn_mfailed=Failed to create ISO filesystem! -burn_egone=ISO image has been deleted - You will need to return to the burn profile to re-generate it. -burn_egone2=Temporary audio tracks have been deleted - You will need to return to the burn profile to re-generate it. -burn_700=Warning! Your ISO image is $1 MB in size, which is above the 700 MB allowed on even an 80 minute CD. -burn_650=Warning! Your ISO image is $1 MB in size, which is above the 650 MB allowed on a normal CD. However, it will fit on an 80 minute CD. -burn_size=The generated ISO image is $1 MB in size, out of a total of $2 MB which is allowed on a normal CD. -burn_nomp3s=There are no files in the selected directories. -burn_mp3header=Converting MP3s to audio tracks with command $1 .. -burn_mp3failed=Failed to convert any MP3 files! -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_mp3format=The file $1 does not appear to be in MP3 format. -burn_746=Warning! Your audio tracks total $1 MB in size, which is above the 746 MB allowed on a normal audio CD. However, they will fit on an 80 minute CD. -burn_807=Warning! Your audio tracks total $1 MB in size, which is above the 807 MB allowed on even an 80 minute CD. -burn_mp3size=The converted audio tracks are $1 MB in size, out of a total of $2 MB which is allowed on a normal audio CD. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_title=Device Options -dev_header=CD burner device options -dev_device=Burner device -dev_none=<None selected> -dev_speed=Write speed -dev_other=Other.. -dev_extra=Extra cdrecord options -dev_err=Failed to save device options -dev_eother=Missing or invalid write speed -dev_ecannot=You are not allowed to edit device options - -mkisofs_title=ISO Filesystem Options -mkisofs_header=Global ISO filesystem options -mkisofs_novers=Include version number in filenames? -mkisofs_notrans=Allow all characters in filenames? -mkisofs_nobak=Skip backup files? -mkisofs_fsyms=Follow symbolic links? -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_cdrecord=CD burning command -config_mkisofs=ISO filesystem building command -config_mpg123=MP3 decoding command -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_temp=Temporary files directory -config_temp_def=Webmin's temp directory -config_ecdrecord=Missing or invalid CD burning command -config_emkisofs=Missing or invalid ISO filesystem building command -config_empg123=Missing or invalid MP3 decoding command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command -config_etemp=Missing or invalid temporary file directory - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/burner/lang/zh_TW b/burner/lang/zh_TW index 7cec012a7..2c0c15f12 100644 --- a/burner/lang/zh_TW +++ b/burner/lang/zh_TW @@ -12,7 +12,6 @@ index_none=目前沒有定義的燒錄設定檔 index_global=通用選項 index_ecdrecord=CD燒錄 在系統上找不到進行燒錄的$1.也許沒有安裝,或你的 模組組態設定 有問題。 index_return=燒錄設定檔清單 - edit_title=編輯燒錄設定檔 create_title=新增燒錄設定檔案 edit_emkisofs=在你的系統上找不到產生ISO檔案的命令 $1.也許還沒有安裝, 或你的 模組組態設定有問題。 @@ -38,7 +37,6 @@ edit_return=燒錄設定檔 edit_ask=在燒錄前詢問組態資訊? edit_sdev=來源光碟裝置 edit_other=其他裝置.. - save_err=儲存燒錄設定檔失敗 save_ename=沒有輸入設定檔名稱 save_eiso=沒有輸入或錯誤的ISO映像檔名 @@ -47,7 +45,6 @@ save_edest=沒有輸入CD上的目錄 $1 save_edirs=沒有選取原始目錄 save_emp3s=沒有輸入MP3檔案或目錄 save_emp3=MP3檔案或目錄 '$1'不存在 - burn_title=燒錄CD burn_rutest1=你想要測試燒錄 ISO映像檔 $1嗎 ? burn_rusure1=你想要燒錄映像檔$1成CD ? @@ -81,7 +78,6 @@ burn_mp3format=檔案$1不是MP3格式 burn_746=警告!您的音軌全部大小$1 MB,超過在一般CD上所允許的746 MB，或許你可以使用80分鐘的CD。 burn_807=警告!您的音軌全部大小$1 MB,超過在一般CD上所允許的807 MB burn_mp3size=所轉換的音軌全部大小$1 MB,超過在一般音樂CD上所允許的 $2 MB - dev_title=燒錄裝置選項 dev_header=CD燒錄裝置選項 dev_device=燒錄裝置 @@ -91,14 +87,12 @@ dev_other=其他.. dev_extra=額外 CD燒錄選項 dev_err=儲存裝置選項失敗 dev_eother=沒有輸入或錯誤的燒錄速度 - mkisofs_title=ISO映像檔選項 mkisofs_header=通用ISO檔案名稱選項 mkisofs_novers=在檔案名稱中加入版本編號? mkisofs_notrans=檔案名稱允許所有字元? mkisofs_nobak=忽略備份檔案? mkisofs_fsyms=使用符號連結? - config_cdrecord=CD燒錄指令 config_mkisofs=產生ISO檔指令 config_mpg123=MP3編碼指令 diff --git a/burner/lang/zh_TW.auto b/burner/lang/zh_TW.auto deleted file mode 100644 index 2bd7e5441..000000000 --- a/burner/lang/zh_TW.auto +++ /dev/null @@ -1,44 +0,0 @@ -index_noaccess=You do not have access to any burn profiles. -index_delete=Delete Selected Profiles - -edit_netatalk=Include NETATALK Macintosh files? -edit_cap=Include CAP Macintosh files? -edit_burn2=Burn Now -edit_test2=Test Burn Now -edit_fly=Copy mode -edit_fly1=Direct from CD to burner -edit_fly0=Use temporary file -edit_srcdrv=Source device driver -edit_dstdrv=Destination device driver -edit_ecannot=You are not allowed to edit this burn profile - -save_eother=Source device file does not exist -save_ecannot1=The ISO image is not in an allowed directory -save_ecannot2=The source directory $1 is not under an allowed directory -save_ecannot3=The MP3 file or directory $1 is not in an allowed directory -save_ecannot4=The source device file is not in an allowed directory - -burn_rusure4=Are you sure you want to copy from $1 ? -burn_mp3failed2=Warning - some MP3 files could not be converted, but the rest were successful. -burn_seconddesc=Insert the blank destination CD and click the button below. -burn_second=Burn Destination CD - -dev_ecannot=You are not allowed to edit device options - -mkiofs_ecannot=You are not allowed to edit ISO filesystem options - -config_sox=SOX command for WAV and OGG decoding -config_cdrdao=CD copying command -config_esox=Missing or invalid SOX command -config_ecdrdao=Missing or invalid CD copying command - -acl_create=Can create new burn profiles? -acl_edit=Can edit existing burn profiles? -acl_global=Can edit global settings? -acl_profiles=Can use profiles -acl_all=All -acl_sel=Selected below .. -acl_dirs=Allow directories for source files - -delete_err=Failed to delete burn profiles -delete_enone=None selected diff --git a/certmgr/lang/af.auto b/certmgr/lang/af.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/af.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/ar.auto b/certmgr/lang/ar.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/ar.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/be.auto b/certmgr/lang/be.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/be.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/bg.auto b/certmgr/lang/bg.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/bg.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/ca.auto b/certmgr/lang/ca.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/ca.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/cs.auto b/certmgr/lang/cs.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/cs.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/da.auto b/certmgr/lang/da.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/da.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/de b/certmgr/lang/de index 1eb848b8c..4a108afcb 100644 --- a/certmgr/lang/de +++ b/certmgr/lang/de @@ -162,4 +162,4 @@ ecannot=Sie dürfen diese Seite nicht verwenden manual_title=Konfigurationsdatei bearbeiten manual_desc=Bearbeiten der OpenSSL-Konfigurationsdatei $1 .. manual_err=Speichern der Konfigurationsdatei fehlgeschlagen -manual_edata=Nichts eingegeben! +manual_edata=Nichts eingegeben! \ No newline at end of file diff --git a/certmgr/lang/el.auto b/certmgr/lang/el.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/el.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/es b/certmgr/lang/es index 935d7873e..34337e33a 100644 --- a/certmgr/lang/es +++ b/certmgr/lang/es @@ -1,11 +1,9 @@ certificate=Certificado key=Llave csr=CSR (Requisito de firmar certificado) - e_file=Un error ocurrio mientras se trataba de obtener informacion de este archivo e_notcert=Quiza este archive no esta encoded en forma PEM o no es un certificado o llave valido e_genfailed=Generacion no fue exitoso - cn=Nombre Común (por ejemplo, nombre de este host) o=Nombre de Organización (por ejemplo, nombre de empresa) ou=Nombre de Unidad de Organización (por ejemplo, división) @@ -22,7 +20,6 @@ expires_on=Fecha de vencimiento md5fingerprint=Huella dactilar MD5 sha1fingerprint=Huella dactilar SHA-1 sha256fingerprint=Huella dactilar SHA-256 - modulus=Modulus (del llave publico) publicExponent=Exponente Publico privateExponent=Exponente Privado @@ -31,26 +28,21 @@ prime2=Número Primo (dos) exponent1=Exponente (uno) exponent2=Exponente (dos) coefficient=Coeficiente - keyfile=Nombre del archivo de la llave keycertfile=Nombre del archivo del par de la llave y el certificado continue=Continuar - certmgrlib_issuer=Emisor certmgrlib_subject=Sujecto certmgrlib_e_file_open=Unable to open file certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl certmgrlib_e_cert=Unable to determine file type: invalid key - index_title=Certificate Manager index_header=Certificate Manager Main Index index_gencert=Generate Self Signed Certificate and Key index_gencsr=Generate Key and Certificate Signing Request (CSR) index_import=Import Key or Signed Certificate index_view=Manage/View Installed Certificates and Keys - index_index=index - gencert_title=Generate Certificate & Key gencert_header=Certificate Manager: Generate Self Signed Certificate and Key gencert_generate=Generate Key @@ -70,7 +62,6 @@ gencert_genworked=Certificate and key generated gencert_saved_key=The key was saved as gencert_saved_cert=The certificate was saved as gencert_saved_keycert=The certificate+key file was saved as - gencsr_title=Generate CSR gencsr_csrfile=CSR filename gencsr_generate=Generate CSR @@ -81,12 +72,10 @@ gencsr_e_genfailed=Error, CSR and key not generated gencsr_e_nofilename=One CSR and one key filename must be specified gencsr_genworked=CSR and key generated gencsr_saved_csr=The CSR was saved as - manage_encrypt=Encrypt Private Key manage_decrypt=Decrypt Private Key manage_changepw=Change Password of Private Key manage_delete=Delete Certificate - view_title=Ver el Certificado/CSR/Key view_view=Ver view_update=Actualizar @@ -111,7 +100,6 @@ view_revoked_certs=Certificados revocados view_revoke_date=Fecha de revocación view_revoke_reason=Razón de revocación view_crl_number=Número CRL - import_title=Import Key or Signed Certificate import_e_nodir=No directory selected import_e_nofilename=Filename not received with file @@ -128,5 +116,4 @@ import_upload_cert=Upload Certificate import_key_file=Key file to upload import_key_destination=Destination directory of key import_upload_key=Upload Key - signcsr_e_nopassword=No CA private key password entered diff --git a/certmgr/lang/es.auto b/certmgr/lang/es.auto deleted file mode 100644 index 8b02c48f5..000000000 --- a/certmgr/lang/es.auto +++ /dev/null @@ -1,41 +0,0 @@ -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_signcsr=Sign Certificate Signing Request - -index_return=module index -index_manual=Edit OpenSSL Configuration File - -gencsr_header=Certificate Manager : Generate Certificate Signing Request - -view_pkcs12=As PKCS12, With Password: - -import_cert_filename=Destination filename of certificate -import_key_filename=Destination filename of key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. - -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file - -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/eu.auto b/certmgr/lang/eu.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/eu.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/fa.auto b/certmgr/lang/fa.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/fa.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/fi.auto b/certmgr/lang/fi.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/fi.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/fr.auto b/certmgr/lang/fr.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/fr.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/he.auto b/certmgr/lang/he.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/he.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/hr.auto b/certmgr/lang/hr.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/hr.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/hu.auto b/certmgr/lang/hu.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/hu.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/it.auto b/certmgr/lang/it.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/it.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/ja.auto b/certmgr/lang/ja.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/ja.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/ko.auto b/certmgr/lang/ko.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/ko.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/lt.auto b/certmgr/lang/lt.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/lt.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/lv.auto b/certmgr/lang/lv.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/lv.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/ms.auto b/certmgr/lang/ms.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/ms.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/mt.auto b/certmgr/lang/mt.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/mt.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/nl.auto b/certmgr/lang/nl.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/nl.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/no b/certmgr/lang/no old mode 100644 new mode 100755 index 592e3898a..eeddea95c --- a/certmgr/lang/no +++ b/certmgr/lang/no @@ -1,165 +1,150 @@ -certificate=Sertifikat -key=Nøkkel -csr=CSR - -e_file=Det oppstod en feil under forsøket på å hente informasjon fra denne filen -e_notcert=Kanskje denne filen ikke er PEM kodet, eller så er den ikke et gyldig sertifikat eller nøkkel -e_genfailed=Generering ikke OK - -cn=Common Name (f.eks. vertsnavn) -o=Organisasjonsnavn (f.eks. firma) -ou=Navn på organisasjonsenhet (f.eks. avdeling) -l=Lokasjon (f.eks by) -st=Fylke (fullt navn) +__norefs=1 +acl_pages=Tillatte sider c=Land (2 bokstavs kode) -emailAddress=E-post adresse (f.eks. webmaster@firma.no) -password=Passord -confirm_password=Bekreft passord -keysize=Nøkkel-størrelse (i bits) -keytype=Nøkkel-type -issued_on=Utgitt -expires_on=Utløper -md5fingerprint=MD5 fingeravtrykk -sha1fingerprint=SHA-1 Fingeravtrykk -sha256fingerprint=SHA-256 Fingeravtrykk - -modulus=Modulus (fra offentlig nøkkel) -publicExponent=Offentlig eksponent -privateExponent=Privat eksponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Eksponent 1 -exponent2=Eksponent 2 -coefficient=Koeffisient - -keyfile=Nøkkel filnavn -keycertfile=Filnavn for sertifikat/nøkkel par -continue=Fortsett - -certmgrlib_issuer=Utgiver -certmgrlib_subject=Emne -certmgrlib_e_file_open=Kunne ikke åpne fil -certmgrlib_e_exec=Kunne ikke bestemme filtype: kunne ikke utføre openssl +certificate=Sertifikat certmgrlib_e_cert=Kunne ikke bestemme filtype: ugyldig sertifikat certmgrlib_e_cert2=Kunne ikke bestemme filtype: ugyldig nøkkel - -index_title=Sertifikat-administrasjon -index_header=Sertifikat-administrasjon hoved-indeks -index_gencert=Generer selv-signert sertifikat og nøkkel -index_gencsr=Generer forespørsel om nøkkel- og sertifikat-signering (CSR) -index_signcsr=Signer forespørsel om sertifikat-signering -index_import=Importer nøkkel eller signert sertifikat -index_view=Administrer/vis installerte sertifikater og nøkler -index_return=modul indeks -index_manual=Rediger OpenSSL konfigurasjonsfil - -index_index=indeks - -gencert_title=Generer sertifikat og nøkkel -gencert_header=Sertifikat-administrasjon: Generer selv-signert sertifikat og nøkkel -gencert_generate=Generer nøkkel -gencert_password_notice=Merk: Dersom denne nøkkelen skal brukes som en tjener SSL nøkkel, vil passordet du angir her måtte angis hver gang en SSL tjeneste som bruker denne nøkkelen, blir startet. Dersom du ikke ønsker å bli bedt om passordet hver gang, kan du la passordet stå tomt. Vær imidlertid oppmerksom på at alle med rot-tilgang til denne maskinen, da vil kunne hente denne nøkkelen og dekryptere all SSL trafikk som bruker denne nøkkelen. +certmgrlib_e_exec=Kunne ikke bestemme filtype: kunne ikke utføre openssl +certmgrlib_e_file_open=Kunne ikke åpne fil +certmgrlib_issuer=Utgiver +certmgrlib_subject=Emne +cn=Common Name (f.eks. vertsnavn) +coefficient=Koeffisient +confirm_password=Bekreft passord +continue=Fortsett +csr=CSR +e_file=Det oppstod en feil under forsøket på å hente informasjon fra denne filen +e_genfailed=Generering ikke OK +e_notcert=Kanskje denne filen ikke er PEM kodet, eller så er den ikke et gyldig sertifikat eller nøkkel +ecannot=Du har ikke lov til å bruke denne siden +emailAddress=E-post adresse (f.eks. webmaster@firma.no) +expires_on=Utløper +exponent1=Eksponent 1 +exponent2=Eksponent 2 gencert_certfile=Sertifikat filnavn gencert_days=Sertifikat gyldig i (dager) -gencert_overwrite=Ovenstående sertifikat og eller nøkler vil bli erstattet dersom du fortsetter. Er du sikker på at du ønsker å fortsette? -gencert_moreinfo=For å laste ned eller se mer informasjon om et sertifikat eller en nøkkel følger du lenken fra filnavnet. -gencert_error=Innsendingen din har følgende feil: -gencert_pleasefix=Vennligst rett opp eventuelle feil og send inn på nytt. -gencert_e_nocn=Ikke noe vanlig navn (CN) angitt gencert_e_badpw=Passordene stemmer ikke overens +gencert_e_genfailed=Feil, sertifikat og nøkkel ikke generert +gencert_e_nocn=Ikke noe vanlig navn (CN) angitt gencert_e_nodays=Ingen gyldighetslengde for sertifikat angitt gencert_e_nofilename=Det må genereres minst ett sertifikat og en nøkkel -gencert_e_genfailed=Feil, sertifikat og nøkkel ikke generert +gencert_error=Innsendingen din har følgende feil: +gencert_generate=Generer nøkkel gencert_genworked=Sertifikat og nøkkel generert -gencert_saved_key=Nøkkelen ble lagret som +gencert_header=Sertifikat-administrasjon: Generer selv-signert sertifikat og nøkkel +gencert_moreinfo=For å laste ned eller se mer informasjon om et sertifikat eller en nøkkel følger du lenken fra filnavnet. +gencert_overwrite=Ovenstående sertifikat og eller nøkler vil bli erstattet dersom du fortsetter. Er du sikker på at du ønsker å fortsette? +gencert_password_notice=Merk: Dersom denne nøkkelen skal brukes som en tjener SSL nøkkel, vil passordet du angir her måtte angis hver gang en SSL tjeneste som bruker denne nøkkelen, blir startet. Dersom du ikke ønsker å bli bedt om passordet hver gang, kan du la passordet stå tomt. Vær imidlertid oppmerksom på at alle med rot-tilgang til denne maskinen, da vil kunne hente denne nøkkelen og dekryptere all SSL trafikk som bruker denne nøkkelen. +gencert_pleasefix=Vennligst rett opp eventuelle feil og send inn på nytt. gencert_saved_cert=Sertifikatet ble lagret som +gencert_saved_key=Nøkkelen ble lagret som gencert_saved_keycert=Sertifikat+nøkkel filen ble lagret som - -gencsr_title=Generer CSR -gencsr_header=Sertifikat-administrasjon : Generer sertifikat-signerings forespørsel +gencert_title=Generer sertifikat og nøkkel gencsr_csrfile=CSR filnavn -gencsr_generate=Generer CSR -gencsr_overwrite=Ovenstående CSR og/eller nøkkel vil bli erstattet dersom du fortsetter. Er du sikker på at du ønsker å fortsette? -gencsr_moreinfo=For å laste ned eller se mer informasjon om en CSR eller en nøkkel følger du lenken fra filnavnet. -gencsr_error=Innsendingen din hadde følgende feil: gencsr_e_genfailed=Feil, CSR og nøkkel ikke generert gencsr_e_nofilename=Du må angi en CSR og et filnavn +gencsr_error=Innsendingen din hadde følgende feil: +gencsr_generate=Generer CSR gencsr_genworked=CSR og nøkkel generert +gencsr_header=Sertifikat-administrasjon : Generer sertifikat-signerings forespørsel +gencsr_moreinfo=For å laste ned eller se mer informasjon om en CSR eller en nøkkel følger du lenken fra filnavnet. +gencsr_overwrite=Ovenstående CSR og/eller nøkkel vil bli erstattet dersom du fortsetter. Er du sikker på at du ønsker å fortsette? gencsr_saved_csr=CSR ble lagret som - -manage_encrypt=Krypter privat nøkkel -manage_decrypt=Dekrypter privat nøkkel -manage_changepw=Endre passord for privat nøkkel -manage_delete=Slett sertifikat - -view_title=Vis Sertifikat/CSR/Nøkkel -view_view=Vis -view_update=Oppdater -view_download=Last ned -view_pkcs12=Som PKCS12, med passord -view_delete=Slett -view_select=Vennligst velg en fil å vise -view_choose=Velg -view_deleted=Filen er slettet -view_e_not_deleted=Feil: Problem ved sletting av fil -view_e_nofile=Fil ikke funnet eller så er den ikke en vanlig fil -view_wildcard=Fil jokertegn -view_cn=Vanlig navn -view_o=Organisasjon -view_ou=Organisasjonsenhet -view_email=E-post adresse -view_location=Plassering -view_serial=Serienummer -view_sig_algorithm=Signatur-algoritme -view_last_update=Siste oppdatering -view_next_update=Neste oppdatering -view_revoked_certs=Tilbakekalte sertifikater -view_revoke_date=Tilbakekallingsdato -view_revoke_reason=Årsak til tilbakekalling -view_crl_number=CRL Nummer - -import_title=Importer nøkkel eller signert sertifikat -import_e_nodir=Ingen katalog valgt -import_e_nofilename=Filnavn ikke mottatt med filen -import_e_nofile=Fil ikke mottatt -import_e_fileexists=Filen finnes -import_error=Opplastingen din hadde følgende feil: -import_pleasefix=Vennligst fiks eventuelle problemer og last opp filen din på nytt -import_header=Velg et sertifikat eller en nøkkel som skal lastes opp -import_choose=Velg en katalog -import_reset=Tilbakestill -import_cert_file=Sertifikatfil å laste opp +gencsr_title=Generer CSR import_cert_destination=Mål-katalog for sertifikat +import_cert_file=Sertifikatfil å laste opp import_cert_filename=Mål-filnavn for sertifikat -import_upload_cert=Last opp sertifikat -import_key_file=Nøkkelfil som skal lastes opp +import_choose=Velg en katalog +import_e_fileexists=Filen finnes +import_e_nodir=Ingen katalog valgt +import_e_nofile=Fil ikke mottatt +import_e_nofilename=Filnavn ikke mottatt med filen +import_error=Opplastingen din hadde følgende feil: +import_header=Velg et sertifikat eller en nøkkel som skal lastes opp import_key_destination=Mål-katalog for nøkkel +import_key_file=Nøkkelfil som skal lastes opp import_key_filename=Mål-filnavn for nøkkel +import_pleasefix=Vennligst fiks eventuelle problemer og last opp filen din på nytt +import_reset=Tilbakestill +import_title=Importer nøkkel eller signert sertifikat +import_upload_cert=Last opp sertifikat import_upload_key=Last opp nøkkel - -signcsr_header=Sertifikat-administrasjon : Signer sertifikat-signerings forespørsel -signcsr_desc=Denne siden lar deg signere en CSR generert av noen andre med en av dine egne private nøkler. -signcsr_title=Signer sertifikat-signerings forespørsel -signcsr_csrfile=CSR filnavn -signcsr_signfile=Filnavn for signert sertifikat -signcsr_keyfile=Fil med CA privat nøkkel -signcsr_keycertfile=CA sertifikatfil +index_gencert=Generer selv-signert sertifikat og nøkkel +index_gencsr=Generer forespørsel om nøkkel- og sertifikat-signering (CSR) +index_header=Sertifikat-administrasjon hoved-indeks +index_import=Importer nøkkel eller signert sertifikat +index_index=indeks +index_manual=Rediger OpenSSL konfigurasjonsfil +index_return=modul indeks +index_signcsr=Signer forespørsel om sertifikat-signering +index_title=Sertifikat-administrasjon +index_view=Administrer/vis installerte sertifikater og nøkler +issued_on=Utgitt +key=Nøkkel +keycertfile=Filnavn for sertifikat/nøkkel par +keyfile=Nøkkel filnavn +keysize=Nøkkel-størrelse (i bits) +keytype=Nøkkel-type +l=Lokasjon (f.eks by) +manage_changepw=Endre passord for privat nøkkel +manage_decrypt=Dekrypter privat nøkkel +manage_delete=Slett sertifikat +manage_encrypt=Krypter privat nøkkel +manual_desc=Redigerer OpenSSL konfigurasjonsfil $1 .. +manual_edata=Ingenting angitt! +manual_err=Kunne ikke lagre konfig.fil +manual_title=Rediger konfig.fil +md5fingerprint=MD5 fingeravtrykk +modulus=Modulus (fra offentlig nøkkel) +o=Organisasjonsnavn (f.eks. firma) +ou=Navn på organisasjonsenhet (f.eks. avdeling) +password=Passord +prime1=Prime 1 +prime2=Prime 2 +privateExponent=Privat eksponent +publicExponent=Offentlig eksponent +sha1fingerprint=SHA-1 Fingeravtrykk +sha256fingerprint=SHA-256 Fingeravtrykk signcsr_ca_passphrase=CA pass frase +signcsr_csrfile=CSR filnavn signcsr_days=Antall dager det skal sertifiseres for -signcsr_generate=Signer sertifikat +signcsr_desc=Denne siden lar deg signere en CSR generert av noen andre med en av dine egne private nøkler. signcsr_e_nocsrfile=Ikke noe CSR filnavn angitt -signcsr_e_nosignfile=Ikke noe filnavn for signert sertifikat angitt signcsr_e_nokeyfile=Ingen CA privat nøkkel-fil eller sertifikat-fil er angitt signcsr_e_nopassword=Ingen passord for CA privat nøkkel angitt +signcsr_e_nosignfile=Ikke noe filnavn for signert sertifikat angitt signcsr_e_signfailed=Feil, signert sertifikat ikke generert -signcsr_worked=Signert sertifikat generert +signcsr_generate=Signer sertifikat +signcsr_header=Sertifikat-administrasjon : Signer sertifikat-signerings forespørsel +signcsr_keycertfile=CA sertifikatfil +signcsr_keyfile=Fil med CA privat nøkkel signcsr_saved_cert=Sertifikatet ble lagret som - -acl_pages=Tillatte sider - -ecannot=Du har ikke lov til å bruke denne siden - -manual_title=Rediger konfig.fil -manual_desc=Redigerer OpenSSL konfigurasjonsfil $1 .. -manual_err=Kunne ikke lagre konfig.fil -manual_edata=Ingenting angitt! +signcsr_signfile=Filnavn for signert sertifikat +signcsr_title=Signer sertifikat-signerings forespørsel +signcsr_worked=Signert sertifikat generert +st=Fylke (fullt navn) +view_choose=Velg +view_cn=Vanlig navn +view_crl_number=CRL Nummer +view_delete=Slett +view_deleted=Filen er slettet +view_download=Last ned +view_e_nofile=Fil ikke funnet eller så er den ikke en vanlig fil +view_e_not_deleted=Feil: Problem ved sletting av fil +view_email=E-post adresse +view_last_update=Siste oppdatering +view_location=Plassering +view_next_update=Neste oppdatering +view_o=Organisasjon +view_ou=Organisasjonsenhet +view_pkcs12=Som PKCS12, med passord +view_revoke_date=Tilbakekallingsdato +view_revoke_reason=Årsak til tilbakekalling +view_revoked_certs=Tilbakekalte sertifikater +view_select=Vennligst velg en fil å vise +view_serial=Serienummer +view_sig_algorithm=Signatur-algoritme +view_title=Vis Sertifikat/CSR/Nøkkel +view_update=Oppdater +view_view=Vis +view_wildcard=Fil jokertegn diff --git a/certmgr/lang/pl.auto b/certmgr/lang/pl.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/pl.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/pt.auto b/certmgr/lang/pt.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/pt.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/pt_BR.auto b/certmgr/lang/pt_BR.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/pt_BR.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/ro.auto b/certmgr/lang/ro.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/ro.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/ru.auto b/certmgr/lang/ru.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/ru.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/sk.auto b/certmgr/lang/sk.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/sk.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/sl.auto b/certmgr/lang/sl.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/sl.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/sv.auto b/certmgr/lang/sv.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/sv.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/th.auto b/certmgr/lang/th.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/th.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/tr.auto b/certmgr/lang/tr.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/tr.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/uk.auto b/certmgr/lang/uk.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/uk.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/ur.auto b/certmgr/lang/ur.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/ur.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/vi.auto b/certmgr/lang/vi.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/vi.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/zh.auto b/certmgr/lang/zh.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/zh.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/certmgr/lang/zh_TW.auto b/certmgr/lang/zh_TW.auto deleted file mode 100644 index 0a7d7b4fa..000000000 --- a/certmgr/lang/zh_TW.auto +++ /dev/null @@ -1,165 +0,0 @@ -certificate=Certificate -key=Key -csr=CSR - -e_file=An error occured while trying to get information from this file -e_notcert=Perhaps this file is not PEM encoded or not a valid certificate or key -e_genfailed=Generation not successful - -cn=Common Name (eg. host name) -o=Organization Name (eg. company) -ou=Organization Unit Name (eg. division) -l=Locality (eg. city) -st=State or Province (full name) -c=Country (2 letter code) -emailAddress=email Address (eg. webmaster@company.com) -password=Password -confirm_password=Confirm Password -keysize=Key size (in bits) -keytype=Key Type -issued_on=Issued on -expires_on=Expires on -md5fingerprint=MD5 Fingerprint -sha1fingerprint=SHA-1 Fingerprint -sha256fingerprint=SHA-256 Fingerprint - -modulus=Modulus (from public key) -publicExponent=Public Exponent -privateExponent=Private Exponent -prime1=Prime 1 -prime2=Prime 2 -exponent1=Exponent 1 -exponent2=Exponent 2 -coefficient=Coefficient - -keyfile=Key file name -keycertfile=Key/Certificate pair file name -continue=Continue - -certmgrlib_issuer=Issuer -certmgrlib_subject=Subject -certmgrlib_e_file_open=Unable to open file -certmgrlib_e_exec=Unable to determine file type: couldn't execute openssl -certmgrlib_e_cert=Unable to determine file type: invalid certificate -certmgrlib_e_cert2=Unable to determine file type: invalid key - -index_title=Certificate Manager -index_header=Certificate Manager Main Index -index_gencert=Generate Self Signed Certificate and Key -index_gencsr=Generate Key and Certificate Signing Request (CSR) -index_signcsr=Sign Certificate Signing Request -index_import=Import Key or Signed Certificate -index_view=Manage/View Installed Certificates and Keys -index_return=module index -index_manual=Edit OpenSSL Configuration File - -index_index=index - -gencert_title=Generate Certificate & Key -gencert_header=Certificate Manager: Generate Self Signed Certificate and Key -gencert_generate=Generate Key -gencert_password_notice=Note: If this key will be used as a server SSL key, any password entered here must be entered each time that an SSL service which uses this key is started. If you don't want to be required to provide the password each time, you may leave the password blank. However, anyone with root access to this machine can potentially take the key and decrypt any SSL traffic which uses this key. -gencert_certfile=Certificate file name -gencert_days=Certificate valid for (days) -gencert_overwrite=The above certificate(s) and/or key(s) will be replaced if you continue. Are you sure you wish to continue? -gencert_moreinfo=To download or view more information about a certificate or key, follow the link from its filename. -gencert_error=Your submission had the following error(s): -gencert_pleasefix=Please correct any issues and resubmit. -gencert_e_nocn=No common name (CN) given -gencert_e_badpw=Passwords do not match -gencert_e_nodays=No certificate validity length specified -gencert_e_nofilename=At least one certificate and one key must be generated -gencert_e_genfailed=Error, certificate and key not generated -gencert_genworked=Certificate and key generated -gencert_saved_key=The key was saved as -gencert_saved_cert=The certificate was saved as -gencert_saved_keycert=The certificate+key file was saved as - -gencsr_title=Generate CSR -gencsr_header=Certificate Manager : Generate Certificate Signing Request -gencsr_csrfile=CSR filename -gencsr_generate=Generate CSR -gencsr_overwrite=The above CSR and/or key will be replaced if you continue. Are you sure you wish to continue? -gencsr_moreinfo=To download or view more information about a CSR or key, follow the link from its filename. -gencsr_error=Your submission had the following error(s): -gencsr_e_genfailed=Error, CSR and key not generated -gencsr_e_nofilename=One CSR and one key filename must be specified -gencsr_genworked=CSR and key generated -gencsr_saved_csr=The CSR was saved as - -manage_encrypt=Encrypt Private Key -manage_decrypt=Decrypt Private Key -manage_changepw=Change Password of Private Key -manage_delete=Delete Certificate - -view_title=View Certificate/CSR/Key -view_view=View -view_update=Update -view_download=Download -view_pkcs12=As PKCS12, With Password: -view_delete=Delete -view_select=Please select a file to view -view_choose=Choose -view_deleted=File deleted sucessfully -view_e_not_deleted=Error: Problem deleting file -view_e_nofile=File not found or not a regular file -view_wildcard=File Wildcard -view_cn=Common Name -view_o=Organization -view_ou=Organization Unit -view_email=Email Address -view_location=Location -view_serial=Serial Number -view_sig_algorithm=Signature Algorithm -view_last_update=Last Update -view_next_update=Next Update -view_revoked_certs=Revoked Certificates -view_revoke_date=Revocation Date -view_revoke_reason=Revocation Reason -view_crl_number=CRL Number - -import_title=Import Key or Signed Certificate -import_e_nodir=No directory selected -import_e_nofilename=Filename not received with file -import_e_nofile=File not received -import_e_fileexists=File exists -import_error=Your upload had the following errors -import_pleasefix=Please fix any problems and re-upload your file -import_header=Choose a certificate or key to upload -import_choose=Choose a directory -import_reset=Reset -import_cert_file=Certificate file to upload -import_cert_destination=Destination directory of certificate -import_cert_filename=Destination filename of certificate -import_upload_cert=Upload Certificate -import_key_file=Key file to upload -import_key_destination=Destination directory of key -import_key_filename=Destination filename of key -import_upload_key=Upload Key - -signcsr_header=Certificate Manager : Sign Certificate Signing Request -signcsr_desc=This page allows you to sign a CSR generated by someone else with one of your own private keys. -signcsr_title=Sign Certificate Signing Request -signcsr_csrfile=CSR filename -signcsr_signfile=Signed certificate filename -signcsr_keyfile=CA private key file -signcsr_keycertfile=CA certificate file -signcsr_ca_passphrase=CA pass phrase -signcsr_days=Number of days to certify for -signcsr_generate=Sign Certificate -signcsr_e_nocsrfile=No CSR filename entered -signcsr_e_nosignfile=No signed certificate filename entered -signcsr_e_nokeyfile=No CA private key file or certificate file entered -signcsr_e_nopassword=No CA private key password entered -signcsr_e_signfailed=Error, signed certificate not generated -signcsr_worked=Signed certificate generated -signcsr_saved_cert=The certificate was saved as - -acl_pages=Allowed pages - -ecannot=You are not allowed to use this page - -manual_title=Edit Config File -manual_desc=Editing OpenSSL configuration file $1 .. -manual_err=Failed to save config file -manual_edata=Nothing entered! diff --git a/cfengine/lang/af.auto b/cfengine/lang/af.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/af.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/ar.auto b/cfengine/lang/ar.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/ar.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/be.auto b/cfengine/lang/be.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/be.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/bg.auto b/cfengine/lang/bg.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/bg.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/ca b/cfengine/lang/ca index 4ecf14089..f800a488d 100644 --- a/cfengine/lang/ca +++ b/cfengine/lang/ca @@ -51,7 +51,6 @@ index_required=Verifica el sistema de fitxers $1 index_required2=Verifica $1 sistemes de fitxers index_disks=$index_required index_disks2=$index_required2 - edit_title=Edició de Valors de Classe edit_create1=Afegeix una Acció i una Classe edit_create2=Afegeix valors a la Classe @@ -193,7 +192,6 @@ edit_resother=Altres línies de resolv.conf edit_route=Portal per defecte edit_reqfs=Sistema de fitxers a verificar edit_reqfree=Espai lliure mínim - save_err=No s'ha pogut desar la classe save_eclass=Hi falta el nom de la classe o bé és invàlid save_elinkfrom=Hi falta l'origen de l'enllaç simbòlic $1 o bé és invàlid @@ -256,7 +254,6 @@ save_emiscmode=Opcions de muntatge de $1 invàlides save_eroute=Hi falta el portal per omissió o bé és invàlid save_ereq=Sistema de fitxers $1 a verificar invàlid save_ereqfree=Hi falta l'espai lliure mínim de $1 o bé és invàlid - section_groups=Defineix grups section_classes=$section_groups section_control_0=Control mestre @@ -284,7 +281,6 @@ section_grant=$section_admit section_deny=Directoris denegats section_required=Verifica sistemes de fitxers section_disks=$section_required - run_title=Execució del Motor de Configuració run_desc=Aquesta pàgina es pot utilitzar per executar el Motor de Configuració en aquest host. En executar-lo, es portaran a terme totes les accions que has configurat allà on sigui necessari. run_header=Opcions per a executar CFengine en aquest host @@ -297,7 +293,6 @@ run_nolinks=Pot crear enllaços simbòlics run_verbose=Mostra una sortida exhaustiva run_exec=S'està executant l'ordre $1... run_ok=Executa'l ara - cfd_title=Dimoni del Motor de Configuració cfd_stop=Atura el Dimoni del Motor de Configuració cfd_stopdesc=Fes clic sobre aquest botó per aturar el dimoni del Motor de Configuració en execució. Això evitarà que altres hosts executin la configuració en aquest servidor i aturarà l'execució planificada de la configuració. @@ -306,7 +301,6 @@ cfd_startdesc=Fes clic sobre aquest botó per iniciar el dimoni del Motor de Con cfd_return=a les opcions del dimoni cfd_none=Encara no s'han creat els valors per al dimoni del Motor de Configuració. cfd_ecmd=No s'ha trobat al sistema l'ordre $1 del dimoni del Motor de Configuració. Pot ser que no estigui instal·lada, o bé que la configuració del mòdul sigui incorrecta. - push_title=Hosts de Configuració Remota push_header=Opcions de distribució del servidor de configuració push_domain=Nom de domini @@ -323,7 +317,6 @@ push_return=als hosts de configuració remota push_title2=Execució de Configuracions de Host push_exec=S'estan executant les configuracions del host amb l'ordre $1... push_ecmd=No s'ha trobat al sistema l'ordre $1 d'execució remota del Motor de Configuració. Pot ser que no estigui instal·lada, o bé que la configuració del mòdul sigui incorrecta. - type_control_0=El camp de sota llista les accions que es porten a terme quan s'executa el motor de configuració, ien l'ordre en què seran executades. Les accions que no estan llistades no es processaran, encara que estiguin llistades a la pàgina principal. type_control_1=Les opcions de sota controlen la conducta global del procés en segon pla que accepta peticions per executar la configuració en aquest host a petició d'un host remot, o bé en base a una planificació fixada. type_directories=Els directoris llistats a sota es crearan amb el propietari i permisos donats quan no existeixin. Els camps d'usuari, grup i permisos són opcionals. @@ -345,13 +338,10 @@ type_resolve=Les adreces IP del servidor DNS que introdueixis a sota s'utilitzar type_defaultroute=Quan s'executa aquesta acció, el motor de configuració comprovarà la ruta per defecte actual contra el portal especificat a sota. type_required=Els sistemes de fitxers llistats a sota seran verificats quan s'executi aquesta acció per comprovar que estan muntats, altrament es mostrarà un missatge d'avís. També es verificarà cada sistema de fitxers per veure si el seu espai lliure ha caigut per sota del mínim (si n'hi ha). type_disks=$type_required - stop_err=No s'ha pogut aturar el dimoni del Motor de Configuració stop_epids=Ja no està en execució stop_ekill=No s'ha pogut matar el procés: $1 - start_err=No s'ha pogut iniciar el dimoni del Motor de Configuració - log_create_section=S'ha creat l'acció $1 i la classe log_create_class=S'ha afegit la classe a l'acció $1 log_modify_class=S'ha modificat la classe de l'acció $1 @@ -362,7 +352,6 @@ log_start=S'ha iniciat el dimoni log_stop=S'ha aturat el dimoni log_push=S'han canviat els hosts de configuració remota log_prun=S'han executat les configuracions dels hosts - hosts_title=Cluster CFengine de Webmin CFengine hosts_hosts=Servidors del Cluster hosts_nohosts=Encara no s'ha definit cap servidor Webmin que executi CFengine @@ -374,7 +363,6 @@ hosts_rundesc=Fes clic sobre aquest botó per executar el Motor de Configuració hosts_copydesc=Fes clic sobre aquest botó per fer que la configuració CFengine d'aquest host es copiï a tots els servidors llistats més amunt i sigui executada tot seguit. hosts_opts=Opcions de les configuracions en execució hosts_return=a la llista de servidors - add_title=Addició de Servidors add_msg=S'està afegint $1... add_gmsg=S'estan afegint els servidors al grup $1... @@ -384,7 +372,6 @@ add_echeck=El servidor $1 no té el mòdul del motor de configuració add_ecfengine=CFengine no està instal·lat al servidor $1 add_ok=S'ha afegit el servidor $1 ($2 $3) add_eversion=El CFengine del servidor $1 és de la versió $2, però aquest Webmin només suporta les versions $3. - host_title=Servidor Gestionat host_header=Detalls del servidor CFengine gestionat host_name=Nom de host @@ -393,10 +380,8 @@ host_delete=Treu-lo de la llista de gestió host_os=SO de Webmin host_cfg=Configuració CFengine actual de $1 host_ver=Versió CFengine - cluster_title=Executa el Motor de Configuració cluster_header=S'està executant el motor de configuració a tots els hosts del cluster... cluster_success=Sortida de CFengine a $1... cluster_failed=No s'ha pogut executar CFengine a $1: $2 - this_server=aquest servidor diff --git a/cfengine/lang/cs b/cfengine/lang/cs index f2094192e..b3521169f 100644 --- a/cfengine/lang/cs +++ b/cfengine/lang/cs @@ -51,7 +51,6 @@ index_required=Zkontrolovat souborový systém $1 index_required2=Zkontrolovat $1 souborové systémy index_disks=$index_required index_disks2=$index_required2 - edit_title=Editace nastavení pro třídu edit_create1=Přidat akci a třídu edit_create2=Přidat nastavení pro třídu @@ -193,7 +192,6 @@ edit_resother=Ostatní resolv.conf řádky edit_route=Výchozí brána edit_reqfs=Souborový systém ke kontrole edit_reqfree=Minimální volné místo - save_err=Chyba při ukládání class save_eclass=Chybějící nebo nesprávný název třídy save_elinkfrom=Chybějící nebo nesprávný zdroj u symbolického linku $1 @@ -256,7 +254,6 @@ save_emiscmode=Neplatná nastavení mountování pro $1 save_eroute=Chybějící nebo nesprávná výchozí brána save_ereq=Neplatný souborový systém ke kontrole $1 save_ereqfree=Chybějící nebo nesprávné minimum volného místra pro $1 - section_groups=Definovat skupiny section_classes=$section_groups section_control_0=Hlavní kontrola @@ -284,7 +281,6 @@ section_grant=$section_admit section_deny=Zakázané adresáře section_required=Kontrolovat souborové systémy section_disks=$section_required - run_title=Spuštění konfiguračního stroje run_desc=Tato stránka může být použita pro spuštění konfiguračního stroje na tomto hostovi. Jakmile ho spustíte, všechny nakonfigurované akce budou provedeny, pokud to je nezbytné. run_header=Nastavení pro spuštění CF stroje na tomto hostovi @@ -297,7 +293,6 @@ run_nolinks=Může vytvořit symbolické linky? run_verbose=Ukázat podrobný výstup? run_exec=Spuštění příkazu $1 .. run_ok=Spustit - cfd_title=Démon konfiguračního stroje cfd_stop=Ukončit démona konfiguračního stroje cfd_stopdesc=Klepnutím na toto tlačítko ukončíte spuštěného démona konfiguračního stroje. Tento úkon zamezí ostatním hostům přístup pro spuštění konfigurací na tomto serveru a ukončí naplánovaná spuštění v dané konfiguraci. @@ -306,7 +301,6 @@ cfd_startdesc=Klepnutím na toto tlačítko spustíte démona konfiguračního s cfd_return=nastavení démona cfd_none=Doposud nebyla vytvořena žádná nastavení pro démona konfiguračního stroje cfd_ecmd=Příkaz démona konfiguračního stroje $1 nebyl ve vašem systému nalezen. Možná není nainstalován, nebo vaše konfigurace modulu není správná. - push_title=Hosté pro vzdálenou konfiguraci push_header=Nastavení distribuce konfigurace serveru push_domain=Název domény @@ -323,7 +317,6 @@ push_return=Hosté pro vzdálenou konfiguraci push_title2=Spustit konfiguraci hostů push_exec=Spuštění konfigurace hostů pomocí příkazu $1 .. push_ecmd=Příkaz pro spuštění vzdáleného konfiguračního stroje $1. Možná není nainstalován, nebo vaše konfigurace modulu není správná. - type_control_0=Níže uvedný seznam obsahuje akce, které budou spuštěny, jakmile se spustí konfigurační stroj, a to v pořadí, ve kterém budou spouštěny. Akce, které nejsou uvedeny v seznamu, nebudou spuštěni, i když se nachází v seznamu na hlavní stránce. type_control_1=Níže uvedená nastavení kontrolují globální chování procesu v pozadí, který přijímá požadavky na spuštění konfigurací na tomto hostu v případech, kdy je poslán vzdáleným hostem nebo prostřednictvím plánovače. type_directories=Níže uvedené adresáře budou vytvořeny s daným vlastnictvím a právy, pokud již neexistují. Vlastník, skupina a práva jsou vyplněna pouze volitelně. @@ -345,13 +338,10 @@ type_resolve=DNS server IP adres, který je jste níže vložili, bude využit p type_defaultroute=Pokud tato akce běží, konfigurační stroj zkontroluje aktuální výchozí rote proti níže specifikovaných branám. type_required=Níže uvedené souborové systémy budou zkontrolovany, zda tato akce poběží při současném ověření, zda jsou tyto systémy přimountovány, a zda nebude zobrazována zpráva s upozorněním. Každý souborový systém bude taktéž zkontrolován, zda má dostatek volného místa, přesahující níže uvedené minimu, pokud je nějaké uvedeno. type_disks=$type_required - stop_err=Chyba při ukončení démona konfiguračního stroje stop_epids=Dále již nepoběží stop_ekill=Chyba při zabití procesu : $1 - start_err=Chyba při spuštění démona konfiguračního stroje - log_create_section=Vytvořena akce $1 a třída log_create_class=Přidána třída do akce $1 log_modify_class=Modifikována třída v akci $1 @@ -362,7 +352,6 @@ log_start=Spuštěn démon log_stop=Ukončen démon log_push=Změněni hosté pro vzdálenou konfiguraci log_prun=Spuštěny konfigurace hostů - hosts_title=Webmin CFengine Cluster hosts_hosts=Servery v clusteru hosts_nohosts=Prozatím nebyly definovány žádné servery, na kterých běží CF stroj. @@ -374,7 +363,6 @@ hosts_rundesc=Klepnutím na toto tlačítko se spustí na všech výše uvedený hosts_copydesc=Klepnutím na toto tlačítko se zkopírují konfigurace CF stroje z tohoto serveru na všechny výše uvedené servery, a zároveň budou ihned spuštěny. hosts_opts=Nastavení pro běžící konfigurace hosts_return=seznam serverů - add_title=Přidat servery add_msg=Přidává se $1 .. add_gmsg=Přidávají se servery ve skupině $1 .. @@ -384,7 +372,6 @@ add_echeck=Server $1 nemá modul konfiguračního stroje add_ecfengine=CF stroj není nainstalován na serveru $1 add_ok=Přidán server $1 ($2 $3) add_eversion=CF stroj na serveru $1 je verze $2, avšak tento modul Webminu podporuje pouze verze $3 . - host_title=Spravovaný Server host_header=Detaily spravovaného serveru pro správu CF strojů host_name=Jméno hosta @@ -393,10 +380,8 @@ host_delete=Odstranit ze seznamu správy host_os=OS od Webminu host_cfg=Aktuální konfigurace CFengine stroje od $1 host_ver=Verze CF stroje - cluster_title=Spuštění konfiguračního stroje cluster_header=Probíhá spuštění konfiguračního stroje na všech hostech v clusteru .. cluster_success=Výstup z CF stroje na $1 .. cluster_failed=Chyba při spuštění CF stroje na $1 : $2 - this_server=tento server diff --git a/cfengine/lang/da.auto b/cfengine/lang/da.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/da.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/de b/cfengine/lang/de index aa8e8e788..fe9aef12f 100644 --- a/cfengine/lang/de +++ b/cfengine/lang/de @@ -399,4 +399,4 @@ cluster_header=Konfigurations-Engine auf allen Hosts im Cluster wird ausgeführt cluster_success=Ausgabe von CFengine auf $1 .. cluster_failed=Fehler beim Ausführen von CFengine auf $1: $2 -this_server=dieser Server +this_server=dieser Server \ No newline at end of file diff --git a/cfengine/lang/el.auto b/cfengine/lang/el.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/el.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/es b/cfengine/lang/es index ba97661b7..d8335b04c 100644 --- a/cfengine/lang/es +++ b/cfengine/lang/es @@ -51,7 +51,6 @@ index_required=Revisar sistema de archivos $1 index_required2=Revisar $1 sistemas de archivo index_disks=$index_required index_disks2=$index_required2 - edit_title=Editar valores para Clase edit_create1=Añadir Acción y Clase edit_create2=Añadir Valores para Clase @@ -193,7 +192,6 @@ edit_resother=Otras líneas resolv.conf edit_route=Pasarela por defecto edit_reqfs=Sistema de archivos a revisar edit_reqfree=Mínimo espacio libre - save_err=No pude salvar clase save_eclass=Nombre de clase falta o es inválido save_elinkfrom='Desde' para enlace simbólico $1 falta o es inválido @@ -256,7 +254,6 @@ save_emiscmode=Opciones de montaje para $1 inválidas save_eroute=Pasarela por defecto falta o es inválida save_ereq=Sistema de archivos a revisar $1 inválido save_ereqfree=Espacio libre mínimo para $1 falta o es inválido - section_groups=Definir grupos section_classes=$section_groups section_control_0=Control maestro @@ -284,7 +281,6 @@ section_grant=$section_admit section_deny=Directorios denegados section_required=Revisar Sistemas de archivo section_disks=$section_required - run_title=Ejecutar Motor de Configuración run_desc=Esta página puede ser usada para ejecutar el Motor de Configuración de esta máquina. Al ejecutarse, todas las acciones que hayas configurado será llevadas a cabo cuando sea necesario. run_header=Opciones para ejecutar CFengine en esta máquina @@ -297,7 +293,6 @@ run_nolinks=¿Puede crear enlaces simbólicos? run_verbose=¿Muestro salida detallada? run_exec=Ejecutando comando $1... run_ok=Ejecutar Ahora - cfd_title=Daemon de Motor de Configuración cfd_stop=Parar Daemon de Motor de Configuración cfd_stopdesc=Haz click en este botón para parar el daemon del Motor de Configuración que se está ejecutando. Esto prevendrá que otras máquinas puedan ejecutar la configuración en este servidor y parará la planificación que se esté ejecutando de la configuración. @@ -306,7 +301,6 @@ cfd_startdesc=Haz click en este botón para arrancar el daemon del Motor de Conf cfd_return=opciones de daemon cfd_none=Aún no se han puesto valores para el daemon del Motor de Configuración. cfd_ecmd=El comando $1 del daemon del Motor de Configuración no fue hallado en tu sistema. Quizás no está instalado o tu configuración del módulo es incorrecta. - push_title=Máquinas de Configuración Remota push_header=Opciones de distribución del servidor de configuración push_domain=Nombre de dominio @@ -323,7 +317,6 @@ push_return=máquinas de configuración remota push_title2=Ejecutar Configuraciones de Máquina push_exec=Ejecutando configuraciones de máquina mediante el comando $1... push_ecmd=El comando $1 de ejecución remota del Motor de Configuración no fue hallado en tu sistema. Quizás no está instalado o tu configuración del módulo es incorrecta. - type_control_0=El campo de abajo lista las acciones que se realizan cuando el motor de configuración se ejecuta, en el orden en que se ejecutará cada una. Aquellas acciones que no estén listadas no serán procesadas, incluso si aparecen listadas en la página principal. type_control_1=Las opciones de abajo controlan el comportamiento global del proceso en segundo plano que acepta requerimientos para ejecutar la configuración en esta máquina al ser requerido por una máquina remota o en una lista fija. type_directories=Los directorios listados debajo serán creados con la propiedad y permisos dados si no existen. Los campos de propietario, grupo y permisos son opcionales. @@ -345,13 +338,10 @@ type_resolve=Las direcciones IP del servidor DNS que digites debajo serán usada type_defaultroute=Al ejecutar esta acción, el motor de configuración revisará la ruta por defecto en curso contra la pasarela especificada debajo. type_required=Los sistemas de archivo listados debajo serán revisados al ejecutar esta acción para verificar que están montados y, si no, mostrar un mensaje de aviso. Cada sistema de archivos será revisado también para ver si su espacio libre ha caído por debajo del mínimo puesto, si hay. type_disks=$type_required - stop_err=No pude parar el daemon del Motor de Configuración stop_epids=Ya no está en ejecución stop_ekill=No pude matar proceso: $1 - start_err=No pude arrancar daemon del Motor de Configuración - log_create_section=Creada acción $1 y clase log_create_class=Añadida clase a acción $1 log_modify_class=Modificada clase en acción $1 @@ -362,7 +352,6 @@ log_start=Daemon arrancado log_stop=Daemon parado log_push=Cambiadas máquinas de configuración remota log_prun=Configuraciones de máquina ejecutadas - hosts_title=Clúster de CFengine de Webmin hosts_hosts=Servidores en Clúster hosts_nohosts=No se han definido aún servidores Webmin ejecutando CFengine. @@ -374,7 +363,6 @@ hosts_rundesc=Haz click en este botón para ejecutar el Motor de Configuración hosts_copydesc=Haz click en este botón para copiar la configuración de CFengine de este servidor a todos los servidores de arriba y ejecutarla inmediátamente. hosts_opts=Opciones para ejecutar configuraciones hosts_return=lista de servidores - add_title=Añadir Servidores add_msg=Añadiendo $1 add_gmsg=Añadiendo servidores en grupo $1... @@ -384,7 +372,6 @@ add_echeck=El servidor $1 no tiene el módulo del motor de configuración add_ecfengine=CFengine no está instalado en el servidor $1 add_ok=Añadido servidor $1 ($2 $3) add_eversion=El CFengine en servidor $1 es de la versión $2, pero este módulo de Webmin sólo soporta las versiones $3 . - host_title=Servidor Gestionado host_header=Detalles del servidor CFengine gestionado host_name=Nombre de máquina @@ -393,10 +380,8 @@ host_delete=Quitar de lista gestionada host_os=SO de Webmin host_cfg=Configuración actual de CFengine desde $1 host_ver=Versión de CFengine - cluster_title=Ejecutar Motor de Configuración cluster_header=Ejecutando motor de configuración en todas las máquinas en clúster... cluster_success=Salida desde CFengine en $1 .. cluster_failed=No pude ejecutar CFengine en $1 : $2 - this_server=este servidor diff --git a/cfengine/lang/eu.auto b/cfengine/lang/eu.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/eu.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/fa.auto b/cfengine/lang/fa.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/fa.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/fi.auto b/cfengine/lang/fi.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/fi.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/fr b/cfengine/lang/fr index edb6bd3ed..50a9df9a6 100644 --- a/cfengine/lang/fr +++ b/cfengine/lang/fr @@ -51,7 +51,6 @@ index_required=Vérifier le système de fichiers $1 index_required2=Vérifier $1 systèmes de fichiers index_disks=$index_required index_disks2=$index_required2 - edit_title=Édition des paramètres pour une classe edit_create1=Ajouter une action et une classe edit_create2=Ajout de paramètres pour une classe @@ -193,7 +192,6 @@ edit_resother=Autres lignes de resolv.conf edit_route=Passerelle par défaut edit_reqfs=Système de fichiers à vérifier edit_reqfree=Espace libre minimal - save_err=Impossible d'enregistrer la classe save_eclass=Nom de classe manquant ou invalide save_elinkfrom=Champ From pour le lien symbolique $1 manquant ou invalide @@ -256,7 +254,6 @@ save_emiscmode=Options de montage pour $1 invalides save_eroute=Passerelle par défaut manquante ou invalide save_ereq=Système de fichiers à vérifier $1 invalide save_ereqfree=Espace libre minimal pour $1 manquant ou invalide - section_groups=Définition des groupes section_classes=$section_groups section_control_0=Contrôle principal @@ -284,7 +281,6 @@ section_grant=$section_admit section_deny=Répertoires interdits section_required=Vérification des systèmes de fichiers section_disks=$section_required - run_title=Exécution du moteur de configuration run_desc=Cette page peut être utilisée pour exécuter le moteur de configuration sur cet hôte. A l'exécution, toutes les actions que vous avez configurées seront réalisées si nécessaire. run_header=Options pour exécuter CFengine sur cet hôte @@ -297,7 +293,6 @@ run_nolinks=Peut créer des liens symboliques ? run_verbose=Afficher une sortie verbeuse ? run_exec=Exécution de la commande $1 en cours... run_ok=Exécuter maintenant - cfd_title=Démon du moteur de configuration cfd_stop=Arrêter le démon du moteur de configuration cfd_stopdesc=Cliquez sur ce bouton pour arrêter le démon du moteur de configuration actif. Cette action empêchera les autres hôtes d'exécuter la configuration sur ce serveur et d'arrêter l'exécution programmée de la configuration. @@ -306,7 +301,6 @@ cfd_startdesc=Cliquez sur ce bouton pour démarrer le démon du moteur de config cfd_return=aux options du démon cfd_none=Aucun réglages pour le démon du moteur de configuration n'a encore été créé. cfd_ecmd=Le démon de la commande $1 du moteur de configuration n'a pas été trouvée sur votre système. Peut-être n'est-il pas installé ou votre configuration du module est-elle incorrecte. - push_title=Hôtes de configuration distants push_header=Options de distribution du serveur de configuration push_domain=Nom du domaine @@ -323,7 +317,6 @@ push_return=aux hôtes de configurations distants push_title2=Exécution des configurations des hôtes push_exec=Exécution des configurations des hôtes avec la commande $1 en cours... push_ecmd=La commande d'exécution distante $1 du moteur de configuration n'a pas été trouvée sur votre système. Peut-être n'est-il pas installé ou votre configuration du module est-elle incorrecte. - type_control_0=Le champ ci-dessous répertorie les actions qui sont effectuées quand le moteur de configuration s'exécute, dans l'ordre dans lequel elles seront réalisées. Les actions qui ne sont pas répertoriées ne seront pas traitées, même si elles sont répertoriées sur la page principale. type_control_1=Les options ci-dessous contrôlent le comportement global du processus d'arrière-plan qui accepte des requêtes pour exécuter la configuration sur cet hôte quand un hôte distant le demande ou sur une programmation fixe. type_directories=Les répertoires listés ci-dessous seront créés avec l'appartenance et les droits d'accès indiqués quand ils n'existent pas. Les champs « propriétaire », « groupe » et « droits d'accès » sont optionnels. @@ -336,7 +329,7 @@ type_classes=$type_group type_copy=Chacun des fichiers ou des répertoires (et leur contenu) listés ci-dessous sera copié dans la destination choisie, si nécessaire. Vous pouvez également choisir de copier à partir d'un hôte distant, dans la mesure où cet hôte exécute le démon du moteur de configuration et autorise cet hôte à copier des fichiers. type_disable=Les fichiers répertoriés ci-dessous seront vérifiés pour voir s'ils existent et satisfont aux critères de taille et de type et, si tel est le cas, ils sont désactivés par renommage ou troncation. type_editfiles=La zone de texte ci-dessous peut servir à saisir un script qui modifie le fichier sélectionné, l'ajout, la suppression ou la mise à jour de lignes si nécessaire. Pour la syntaxe de ce langage de script, reportez-vous à la documentation complète de CFengine. -type_ignore=Tout fichier ou répertoire saisi ci-dessous sera ignoré par toutes les actions « Copier des fichiers », « Définir les droits d'accès » et « Classer les répertoires ». Chaque élément peut être un chemin d'accès complet, une expression régulière dans le style d'un interpréteur de commandes ou un nom de fichier. +type_ignore=Tout fichier ou répertoire saisi ci-dessous sera ignoré par toutes les actions « Copier des fichiers », « Définir les droits d'accès » et « Classer les répertoires ». Chaque élément peut être un chemin d'accès complet, une expression régulière dans le style d'un interpréteur de commandes ou un nom de fichier. type_processes=Utilisez le champ ci-dessous pour rechercher les processus correspondant au motif indiqué et leur envoyer optionnellement un signal pour les tuer. Quand un processus est tué, vous pouvez également spécifier une commande à exécuter pour le redémarrer. type_shellcommands=Les commandes répertoriées ci-dessous seront exécutées lors de chaque exécution du moteur de configuration. Les champs « Utilisateur » et « Groupe » sont optionnels - si rien n'est saisi, la commande sera exécutée en tant que root. Le champ « Temps imparti » est également optionnel - si aucun temps imparti n'est saisi, CFengine attendra indéfiniment jusqu'à ce que la commande ait terminé. type_tidy=Les répertoires listés ci-dessous seront analysés pour vérifier les fichiers correspondant aux critères de nom, d'âge et d'heure sélectionnés lors de chaque exécution de CFengine. Tout fichier trouvé sera supprimé, sans qu'une sauvegarde ne soit effectuée. @@ -345,13 +338,10 @@ type_resolve=Le serveur DNS et les adresses IP que vous saisissez ci-dessous ser type_defaultroute=Quand cette action est exécutée, le moteur de configuration vérifie la route par défaut actuelle par rapport à la passerelle spécifiée ci-dessous. type_required=Les systèmes de fichiers répertoriés ci-dessous seront vérifiés lors de l'exécution de cette action pour s'assurer qu'ils sont montés et, si tel n'est pas le cas, un message d'avertissement sera affiché. Chaque système de fichiers sera également vérifié pour voir si son espace libre est tombé au-dessous du minimum fixé, s'il y a lieu. type_disks=$type_required - stop_err=Impossible d'arrêter le démon du moteur de configuration stop_epids=Ne s'exécute plus stop_ekill=Impossible de tuer le processus : $1 - start_err=Impossible de démarrer le démon du moteur de configuration - log_create_section=Créé l'action $1 et la classe log_create_class=Ajouté la classe à l'action $1 log_modify_class=Modifié la classe dans l'action $1 @@ -362,7 +352,6 @@ log_start=Démarré le démon log_stop=Arrêté le démon log_push=Changé les hôtes de configuration distants log_prun=Exécuté les configurations des hôtes - hosts_title=Cluster CFengine Webmin hosts_hosts=Serveurs dans le cluster hosts_nohosts=Aucun serveur Webmin exécutant CFengine n'a encore été défini. @@ -374,7 +363,6 @@ hosts_rundesc=Cliquez sur ce bouton pour que le moteur de configuration s'exécu hosts_copydesc=Cliquez sur ce bouton pour que soit copiée la configuration CFengine depuis ce serveur vers tous les serveurs ci-dessus et immédiatement exécutée. hosts_opts=Options pour exécuter les configurations hosts_return=à la liste des serveurs - add_title=Ajout de serveurs add_msg=Ajout de $1 en cours... add_gmsg=Ajout de serveurs dans le groupe $1 en cours... @@ -384,7 +372,6 @@ add_echeck=Le serveur $1 n'a pas le module du moteur de configuration add_ecfengine=CFengine n'est pas installé sur le serveur $1 add_ok=Ajouté le serveur $1 ($2 $3) add_eversion=CFengine sur le serveur $1 est la version $2, mais ce module Webmin ne prend en charge que les versions $3 . - host_title=Serveur géré host_header=Détails du serveur CFengine géré host_name=Nom de l'hôte @@ -393,10 +380,8 @@ host_delete=Supprimer de la liste des serveurs gérés host_os=Système d'exploitation de Webmin host_cfg=configuration CFengine actuelle de $1 host_ver=CFengine version - cluster_title=Exécution du moteur de configuration cluster_header=Exécution du moteur de configuration sur tous les hôtes dans le cluster en cours... cluster_success=Sortie de CFengine sur $1 en cours... cluster_failed=Impossible d'exécuter CFengine sur $1 : $2 - this_server=Ce serveur diff --git a/cfengine/lang/he.auto b/cfengine/lang/he.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/he.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/hr.auto b/cfengine/lang/hr.auto deleted file mode 100644 index 7a0e7b468..000000000 --- a/cfengine/lang/hr.auto +++ /dev/null @@ -1,401 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/hu b/cfengine/lang/hu index 8ea4e44df..420c7f882 100644 --- a/cfengine/lang/hu +++ b/cfengine/lang/hu @@ -51,7 +51,6 @@ index_required=Check filesystem $1 index_required2=Check $1 filesystems index_disks=$index_required index_disks2=$index_required2 - edit_title=Edit Settings for Class edit_create1=Add Action and Class edit_create2=Add Settings for Class @@ -193,7 +192,6 @@ edit_resother=Other resolv.conf lines edit_route=Default gateway edit_reqfs=Filesystem to check edit_reqfree=Minimum free space - save_err=Failed to save class save_eclass=Missing or invalid class name save_elinkfrom=Missing or invalid from for symlink $1 @@ -256,7 +254,6 @@ save_emiscmode=Invalid mount options for $1 save_eroute=Missing or invalid default gateway save_ereq=Invalid filesystem to check $1 save_ereqfree=Missing or invalid minimum free space for $1 - section_groups=Define groups section_classes=$section_groups section_control_0=Master control @@ -284,7 +281,6 @@ section_grant=$section_admit section_deny=Denied directories section_required=Check Filesystems section_disks=$section_required - run_title=Run Configuration Engine run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. run_header=Options for running CFengine on this host @@ -297,7 +293,6 @@ run_nolinks=Can create symbolic links? run_verbose=Show verbose output? run_exec=Running command $1 .. run_ok=Run Now - cfd_title=Configuration Engine Daemon cfd_stop=Stop Configuration Engine Daemon cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. @@ -306,7 +301,6 @@ cfd_startdesc=Click this button to start the Configuration Engine daemon with th cfd_return=daemon options cfd_none=No settings for the Configuration Engine daemon has been created yet. cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - push_title=Remote Configuration Hosts push_header=Configuration server distribution options push_domain=Domain name @@ -323,7 +317,6 @@ push_return=remote configuration hosts push_title2=Run Host Configurations push_exec=Running host configurations with command $1 .. push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. @@ -345,13 +338,10 @@ type_resolve=The DNS server IP addresses that you enter below will be used to up type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. type_disks=$type_required - stop_err=Failed to stop Configuration Engine daemon stop_epids=No longer running stop_ekill=Failed to kill process : $1 - start_err=Failed to start Configuration Engine daemon - log_create_section=Created action $1 and class log_create_class=Added class to action $1 log_modify_class=Modified class in action $1 @@ -362,7 +352,6 @@ log_start=Started daemon log_stop=Stopped daemon log_push=Changed remote configuration hosts log_prun=Ran host configurations - hosts_title=Webmin CFengine Cluster hosts_hosts=Servers in Cluster hosts_nohosts=No Webmin servers running CFengine have been defined yet. @@ -374,7 +363,6 @@ hosts_rundesc=Click this button to have the Configuration Engine run on all the hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. hosts_opts=Options for running configurations hosts_return=servers list - add_title=Add Servers add_msg=Adding $1 .. add_gmsg=Adding servers in group $1 .. @@ -384,7 +372,6 @@ add_echeck=Server $1 does not have the configuration engine module add_ecfengine=CFengine is not installed on server $1 add_ok=Added server $1 ($2 $3) add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - host_title=Managed Server host_header=Managed CFengine server details host_name=Host name @@ -393,10 +380,8 @@ host_delete=Remove from managed list host_os=OS from Webmin host_cfg=Current CFengine configuration from $1 host_ver=CFengine version - cluster_title=Run Configuration Engine cluster_header=Running configuration engine on all hosts in cluster .. cluster_success=Output from CFengine on $1 .. cluster_failed=Failed to run CFengine on $1 : $2 - this_server=this server diff --git a/cfengine/lang/it.auto b/cfengine/lang/it.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/it.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/ja.auto b/cfengine/lang/ja.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/ja.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/ko.auto b/cfengine/lang/ko.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/ko.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/lt.auto b/cfengine/lang/lt.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/lt.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/lv.auto b/cfengine/lang/lv.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/lv.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/ms.auto b/cfengine/lang/ms.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/ms.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/mt.auto b/cfengine/lang/mt.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/mt.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/nl b/cfengine/lang/nl index 98c106f51..c050657dc 100644 --- a/cfengine/lang/nl +++ b/cfengine/lang/nl @@ -51,7 +51,6 @@ index_required=Controleer filesysteem $1 index_required2=Controleer $1 filesystemen index_disks=$index_required index_disks2=$index_required2 - edit_title=Bewerk Instellingen voor Klasse edit_create1=Toevoegen van Actie en Klasse edit_create2=Toevoegen van Setting's voor Klasse @@ -193,7 +192,6 @@ edit_resother=Andere resolv.conf regels edit_route=Standaard gateway edit_reqfs=Filesysteem om te controleren edit_reqfree=Minimum vrije ruimte - save_err=Mislukt om klasse op te slaan save_eclass=Ontbrekende of ongeldige klasse naam save_elinkfrom=Ontbrekende of ongeldige voor symlink $1 @@ -256,7 +254,6 @@ save_emiscmode=Ongeldige mount opties voor $1 save_eroute=Ontbrekende of ongeldige standaard gateway save_ereq=Ongeldig filesysteem om te controleren $1 save_ereqfree=Ontbrekende of ongeldige minimum vrije ruimte voor $1 - section_groups=Definieer groepen section_classes=$section_groups section_control_0=Master controle @@ -284,7 +281,6 @@ section_grant=$section_admit section_deny=Negeer directory's section_required=Controleer Filesystemen section_disks=$section_required - run_title=Uitvoeren Configuratie Engine run_desc=Deze pagina kan worden gebruikt om de Configuratie Engine op deze host uit te voeren, Wanneer deze aan het werk word gezet zullen alle acties die u geconfigureerd heeft worden uitgevoerd waar nodig run_header=Opties voor uitvoerende CFengine op deze host @@ -297,7 +293,6 @@ run_nolinks=Mag symbolische links maken? run_verbose=Laat verbose resultaat zien? run_exec=Uitvoeren van opdracht $1 .. run_ok=Nu Uitvoeren - cfd_title=Configuratie Engine Daemon cfd_stop=Stop Configuratie Engine Daemon cfd_stopdesc=Klik op deze knop om de Configuratie Engine daemon te stoppen. Dit voorkomt dat andere hosts kunnen werken met de configuratie op deze server, en stopt de geplande configuratie. @@ -306,7 +301,6 @@ cfd_startdesc=Klik op deze knop om de Configuratie Engine daemon te starten met cfd_return=daemon opties cfd_none=Er zijn nog geen instellingen gemaakt voor deze Configuratie Engine daemon cfd_ecmd=De Configuratie Engine daemon opdracht $1 is niet gevonden op uw systeem. Misschien is het niet geinstalleerd, of uw module configuratie is niet correct. - push_title=Remote Configuratie Hosts push_header=Configuratie server distributie opties push_domain=Domein naam @@ -323,7 +317,6 @@ push_return=remote configuratie hosts push_title2=Host Configuraties Uitvoeren push_exec=Uitvoeren van host configuraties met de opdracht $1 .. push_ecmd=De Configuratie Engine remote uitvoer opdracht $1 is niet gevonden op uw systeem. Misschien is het niet geinstalleerd, of uw module configuratie is niet correct. - type_control_0=In het veld hieronder staat de lijst met acties die worden uitgevoerd als de configuratie engine aan het werk is, in de volgorde dat ze worden uitgevoerd. Acties die niet hier staan worden niet uitgevoerd, zelfs als ze in de lijst staan op de hoofdpagina. type_control_1=De opties hieronder hebben controle over het globale gedrag over de processen die op de achtergrond aanvragen accepteren om de configuratie uit te voeren op deze host, ook wanneer die komt van een remote host of door een vast geplande opdracht. type_directories=De directory's in de lijst hieronder zullen worden gemaakt met de opgegeven eigenaarschap en permissies wanneer ze niet bestaan, De eigenaar, groep en permissie velden zijn optioneel. @@ -345,13 +338,10 @@ type_resolve=Wanneer deze actie word uitgevoerd zullen de DNS server IP adressen type_defaultroute=Wanneer deze actie word uitgevoerd zal de configuratie engine de standaard route controleren ten op zichten van de gateway die hieronder gespecificeerd is. type_required=De filesystemen in de lijst hieronder zullen worden gecontroleerd wanneer deze actie word uitgevoerd om zeker te zijn of ze ge-mount zijn, en zo niet zult u een waarschuwing krijgen. Ieder filesysteem zal ook gecontroleerd worden op de minimaal toegelaten vrije ruimte. type_disks=$type_required - stop_err=Mislukt om Configuratie Engine daemon te stoppen stop_epids=Werkt niet langer stop_ekill=Mislukt om het volgende proces te killen : $1 - start_err=Mislukt om Configuratie Engine daemon te starten - log_create_section=Maak actie $1 en klasse log_create_class=Klasse toevoegen aan actie $1 log_modify_class=Gemodificeerde klasse in actie $1 @@ -362,7 +352,6 @@ log_start=Gestarte daemon log_stop=Gestopte daemon log_push=Veranderde remote configuratie hosts log_prun=Uitgevoerde host configuraties - hosts_title=Webmin CFengine Cluster hosts_hosts=Servers in Cluster hosts_nohosts=Er zijn nog geen Webmin servers met een werkende CFengine gedefinieerd. @@ -374,7 +363,6 @@ hosts_rundesc=Klik op deze knop om de Configuratie Engine te laten werken op all hosts_copydesc=Klik op deze knop om de CFengine configuratie van deze server te kopiëren naar alle servers die hierboven staan, en deze direct uit te voeren. hosts_opts=Opties voor werkende configuraties hosts_return=servers lijst - add_title=Voeg servers toe add_msg=Toevoegen $1 .. add_gmsg=Servers toevoegen in groep $1 .. @@ -384,7 +372,6 @@ add_echeck=Server $1 heeft niet de configuratie engine module add_ecfengine=CFengine is niet geinstalleerd op server $1 add_ok=Toegevoegde server $1 ($2 $3) add_eversion=CFengine op server $1 is versie $2, maar deze Webmin module ondersteund alleen versie $3 . - host_title=Beheer Server host_header=Beheer CFengine server details host_name=Host naam @@ -393,10 +380,8 @@ host_delete=Verwijderen van beheer lijst host_os=OS van Webmin host_cfg=Huidige CFengine configuratie van $1 host_ver=CFengine versie - cluster_title=Configuratie Engine Uitvoeren cluster_header=Werkende configuratie engine op alle hosts in cluster .. cluster_success=Resultaat van CFengine op $1 .. cluster_failed=Mislukt om CFengine in werking te zetten op $1 : $2 - this_server=deze server diff --git a/cfengine/lang/no b/cfengine/lang/no index da4ea3436..cb62f9acc 100644 --- a/cfengine/lang/no +++ b/cfengine/lang/no @@ -51,7 +51,6 @@ index_required=Sjekk filsystem $1 index_required2=Sjekk $1 filsystemer index_disks=$index_required index_disks2=$index_required2 - edit_title=Rediger innstillinger for klasse edit_create1=Legg til handling og klasse edit_create2=Legg til innstillinger for klasse @@ -193,7 +192,6 @@ edit_resother=Andre resolv.conf linjer edit_route=Standard gateway edit_reqfs=Filsystem som skal sjekkes edit_reqfree=Minimum ledig plass - save_err=Kunne ikke lagre klasse save_eclass=Manglende eller ugyldig klassenavn save_elinkfrom=Manglende eller ugyldig fra for symlink $1 @@ -256,7 +254,6 @@ save_emiscmode=Ugyldige monteringsinnstillinger for $1 save_eroute=Manglende eller ugyldig standard gateway save_ereq=Ugyldig filsystem å sjekke $1 save_ereqfree=Manglende eller ugyldig minimum ledig plass for $1 - section_groups=Definer grupper section_classes=$section_groups section_control_0=Master kontroll @@ -284,7 +281,6 @@ section_grant=$section_admit section_deny=Nektede kataloger section_required=Sjekk filsystemer section_disks=$section_required - run_title=Kjør Konfigurasjonsmotor run_desc=Denne siden kan brukes til å kjøre Konfigurasjonsmotor på denne verten. Når den kjøres vil handlingene du har konfigurert bli utført der det er nødvendig. run_header=Innstillinger for å kjøre CFengine på denne verten @@ -297,7 +293,6 @@ run_nolinks=Kan opprette symbolske lenker? run_verbose=Vis detaljert output? run_exec=Kjører kommando $1 .. run_ok=Kjør nå - cfd_title=Konfigurasjonsmotor Daemon cfd_stop=Stop Konfigurasjonsmotor Daemon cfd_stopdesc=Klikk på denne knappen for å stoppe Konfigurasjonsmotor daemonen. Dette vil forhindre andre verter fra å kjøre konfigurasjonen på denne tjeneren, og stopp den planlagte kjøringen av konfigurasjonen. @@ -306,7 +301,6 @@ cfd_startdesc=Klikk på denne knappen for å starte Configuration Engine daemone cfd_return=daemon innstillinger cfd_none=Det er ikke opprettet noen innstillinger for Konfigurasjonsmotoren enda. cfd_ecmd=Daemonkommandoen $1 for Konfigurasjonsmotoren ble ikke funnet på systemet ditt. Kanskje den ikke er installert, eller så er modulkonfigurasjonen feil. - push_title=Eksterne konfigurasjonsverter push_header=Konfigurasjonstjener distribusjonsinnstillinger push_domain=Domenenavn @@ -323,7 +317,6 @@ push_return=eksterne konfigurasjonsverter push_title2=Kjør vertskonfigurasjoner push_exec=Kjører vertskonfigurasjoner med kommandoen $1 .. push_ecmd=Konfigurasjonsmotor kommandoen $1 for ekstern eksekvering ble ikke funnet på systemet ditt. Kanskje den ikke er installert, eller så er modulkonfigurasjonen feil. - type_control_0=Feltet nedenfor angir handlinger som utføres når konfigurasjonsmotoren kjører, i den rekkefølgen de utføres. Handlinger som ikke vises her vil ikke bli kjørt, selv om de er angitt på hovedsiden. type_control_1=Innstillingene nedenfor kontrollerer den globale oppførselsen til bakgrunnsprosessen som mottar forespørsler om å utføre konfigurasjonen på denne verten, når dette forespørres av en ekstern vert, eller i henhold til en fast tidsplan. type_directories=Katalogene angitt nedenfor vil bli opprettet med angitt eierskap og tillatelser dersom de ikke finnes. Feltene for eier, gruppe og tillatelser er valgfrie. @@ -345,13 +338,10 @@ type_resolve=DNS tjeners IP adresse som du angir nedenfor vil bli brukt til å o type_defaultroute=Når denne handlingen kjøres vil konfigurasjonsmotoren sjekk gjeldende standard rute mot gateway angitt nedenfor. type_required=Filsystemene angitt nedenfor vil bli sjekket når denne handlingen kjøres for å verifisere at de er montert, og hvis ikke vil det bli vist en advarsel. Hvert filsystem vil også bli sjekket for å se om ledig diskplass er under et eventuelt angitt minimum. type_disks=$type_required - stop_err=Kunne ikke stoppe Konfigurasjonsmotor daemon stop_epids=Kjører ikke lenger stop_ekill=Kunne ikke stoppe prosessen : $1 - start_err=Kunne ikke starte Konfigurasjonsmotor daemon - log_create_section=Opprettet handling $1 og klasse log_create_class=La til klasse til handling $1 log_modify_class=Endret klasse i handling $1 @@ -362,7 +352,6 @@ log_start=Startet daemon log_stop=Stoppet daemon log_push=Endret eksterne konfigurasjonsverter log_prun=Kjørte vertskonfigurasjoner - hosts_title=Webmin CFengine Klynge hosts_hosts=Tjenere i klynge hosts_nohosts=Ingen Webmin tjenere som kjører CFengine er definert enda. @@ -374,7 +363,6 @@ hosts_rundesc=Klikk på denne knappen for å kjøre Konfigurasjonsmotor på alle hosts_copydesc=Klikk på denne knappen for å kopiere CFengine konfigurasjonen fra denne tjeneren til alle tjenere ovenfor, og umiddelbart ta denne i bruk, hosts_opts=Innstillinger for kjørende konfigurasjoner hosts_return=tjener liste - add_title=Legg til tjenere add_msg=Legger til $1 .. add_gmsg=Legger til tjenere i gruppe $1 .. @@ -384,7 +372,6 @@ add_echeck=Tjener $1 har ikke konfigurasjonsmotor modulen add_ecfengine=CFengine er ikke installert på tjener $1 add_ok=Lagt til tjener $1 ($2 $3) add_eversion=CFengine på tjener $1 er versjon $2, men denne Webmin modulen støtter bare versjonene $3 . - host_title=Administrert tjener host_header=Detaljer for administrert CFengine tjener host_name=Vertsnavn @@ -393,10 +380,8 @@ host_delete=Fjern fra administrert liste host_os=OS fra Webmin host_cfg=Gjeldende CFengine konfigurasjon fra $1 host_ver=CFEngine versjon - cluster_title=Kjør Konfigurasjonsmotor cluster_header=Kjører konfigurasjonsmotor på alle verter i klyngen .. cluster_success=Output fra CFengine på $1 .. cluster_failed=Kunne ikke kjøre CFengine på $1 : $2 - this_server=denne tjeneren diff --git a/cfengine/lang/pl b/cfengine/lang/pl index 0e16f8063..e203b80e2 100644 --- a/cfengine/lang/pl +++ b/cfengine/lang/pl @@ -4,7 +4,6 @@ index_editfiles2=Edytuj $1 plików index_grant=$index_admit index_grant2=$index_admit2 index_files=Ustaw uprawnienia na $1 - edit_title=Edytuj ustawienia dla klasy edit_create1=Dodaj działanie i klasę edit_create2=Dodaj ustawienia dla klasy @@ -141,7 +140,6 @@ edit_resother=Inne linie resolv.conf edit_route=Brama domyślna edit_reqfs=Sprawdź system plików edit_reqfree=Minimalna wolna przestrzeń - section_groups=Definiowanie grup section_classes=$section_groups section_control_1=Opcje konfiguracyjne demona @@ -159,7 +157,6 @@ section_admit=dozwolone katalogi section_grant=$section_admit section_required=Sprawdź systemów plików section_disks=$section_required - cfd_title=Konfiguracja silnika daemona cfd_stop=Zatrzymaj Konfigurację silnika daemona cfd_stopdesc=Kliknij, aby zatrzymać konfigurację silnika daemona. Uniemożliwi to uruchomienie konfigurację na innych hostach tego serwera i zatrzyma skonfigurowany harmonogram (jeżeli włączony). @@ -168,23 +165,18 @@ cfd_startdesc=Kliknij, aby uruchomić konfigurację silnika daemona. Pozwoli to cfd_return=Opcje daemona cfd_none=Brak ustawień dla silnika konfiguracji, daemon został już utworzony. cfd_ecmd=Polecenie konfiguracji silnika daemon $1 nie zostało znalezione w systemie. Możliwe, że nie jest zainstalowane lub konfiguracja modułu jest nieprawidłowa. - type_grant=$type_admit type_disks=$type_required - stop_err=Nie udało się zatrzymać konfiguracji demona silnika stop_epids=Już nie działa stop_ekill=Nie udało się zabić procesu: $1 - start_err=Nie udało się uruchomić silnika konfiguracji demona - hosts_hosts=Serwery w klastrze hosts_add=Dodaj serwer hosts_gadd=Dodaj serwery w grupie hosts_copy=Kopiuj i uruchom konfigurację hosts_opts=Opcje konfiguracji z systemem hosts_return=lista serwerów - add_title=Dodaj serwery add_msg=Dodawanie $1 .. add_gmsg=Dodawanie serwerów w grupie $1 .. @@ -194,7 +186,6 @@ add_echeck=Serwer $1 nie ma konfiguracji silnika modułu add_ecfengine=CFengine nie jest zainstalowany na serwerze $1 add_ok=Dodano serwer $1 ($2 $3) add_eversion=CFengine na serwerze $1 jest w wersji $2, ale ten moduł Webmin wspiera tylko wersję $3 - host_title=Zarządzanie serwerem host_header=Szczegóły zarządzania serwerem CFengine host_name=Nazwa hosta @@ -203,10 +194,8 @@ host_delete=Usuń z listy wybranych host_os=OS z Webmin host_cfg=Aktualna konfiguracja CFengine z $1 host_ver=Wersja CFengine - cluster_title=Uruchom Konfigurację silnika cluster_header=Uruchamianie silnika konfiguracji na wszystkich hostach w klastrze .. cluster_success=Dane wyjściowe Z cfengine na $1 cluster_failed=Błąd uruchamiania CFengine na $1 : $2 - this_server=ten serwer diff --git a/cfengine/lang/pl.auto b/cfengine/lang/pl.auto deleted file mode 100644 index 4c87c93eb..000000000 --- a/cfengine/lang/pl.auto +++ /dev/null @@ -1,194 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_links=Symbolic links to create -edit_files_touch=Touch files -edit_files_linkchildren=Link children -edit_dis_link=Symlink -edit_disrot2=Rotate $1 times - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_control_0=Master control -section_mountables=Mountable filesystems -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_miscmounts=Mount other NFS filesystems -section_tidy=Tidy up directories -section_links=Create symbolic links -section_shellcommands=Run shell commands -section_processes=Manage processes -section_deny=Denied directories - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_run=Run Configuration Engine -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. diff --git a/cfengine/lang/pt.auto b/cfengine/lang/pt.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/pt.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/pt_BR.auto b/cfengine/lang/pt_BR.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/pt_BR.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/ro.auto b/cfengine/lang/ro.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/ro.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/ru.auto b/cfengine/lang/ru.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/ru.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/sk.auto b/cfengine/lang/sk.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/sk.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/sl.auto b/cfengine/lang/sl.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/sl.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/sv b/cfengine/lang/sv index 6b343efed..48bec3782 100644 --- a/cfengine/lang/sv +++ b/cfengine/lang/sv @@ -51,7 +51,6 @@ index_required=Kontroller filsystem $1 index_required2=Kontrollera $1 filsystem index_disks=$index_behövd index_disks2=$index_behövd2 - edit_title=Ändra Inställning för Klass edit_create1=Lägg till Handling och Klass edit_create2=Lägg till Inställning för Klass @@ -193,7 +192,6 @@ edit_resother=Andra resolv.conf rader edit_route=Standard väg edit_reqfs=Filsystem att kontrollera edit_reqfree=Minimalt ledigt utrymme - save_err=Misslyckades att spara klass save_eclass=Saknad eller felaktig klass namn save_elinkfrom=Saknad eller felaktig från för symlänk $1 @@ -256,7 +254,6 @@ save_emiscmode=Felaktig monterings val för $1 save_eroute=Saknad eller felaktig standard väg save_ereq=Felaktigt filsystem att kontrollera $1 save_ereqfree=Saknad eller felaktig minimal ledigt utrymme för $1 - section_groups=Definiera grupper section_classes=$avsnitt_grupper section_control_0=Master kontroll @@ -284,7 +281,6 @@ section_grant=$avsnitt_godkänna section_deny=Neka sökvägar section_required=Kontrollera filsystem section_disks=$avsnitt_obligatorisk - run_title=Kör Konfigurations Motor run_desc=Den här sida kan användas att köra Konfigurations Motorn på denna värd. När du kör, alla handlingar som du konfigurerat kommer att distribueras ut där det är nödvändigt. run_header=Val för körande CFengine på denna värd @@ -297,7 +293,6 @@ run_nolinks=Kan skapa symboliska länkar? run_verbose=Visa utförlig utmatning? run_exec=Kör kommando $1 .. run_ok=Kör Nu - cfd_title=Konfigurations Motor Demon cfd_stop=Stoppa Konfigurations Motor Demonen cfd_stopdesc=Klicka på knappen för att stoppa Konfigurations Motor demonen. Detta kommer att hindra andra värdar att köra konfiguration på denna server, och stoppa schemalagd körning av konfiguration. @@ -306,7 +301,6 @@ cfd_startdesc=Klicka på knappen för att starta Konfigurations Motor demonen me cfd_return=demon val cfd_none=Inga inställningar för Konfigurations Motor demonen har blivit skapade ännu. cfd_ecmd=Konfigurations Motor demon kommando $1 hittades inte på ditt system. Kanske den inte är installerad, eller din modul konfiguratin är felaktig. - push_title=Fjärr Konfigurations Värdar push_header=Konfigurations server distributions val push_domain=Domän namn @@ -323,7 +317,6 @@ push_return=fjärr konfigurations värdar push_title2=Kör Värd Konfigurationer push_exec=Kör värd konfiguration med kommando $1 .. push_ecmd=Konfigurations Motor fjärr utförande kommando $1 hittades inte på ditt system. Kanske den inte är installerad, eller din modul konfiguration är felaktig. - type_control_0=Fältet under listar händelser som genomförs när konfigurations motor'n körs, i den ordning som listas kommer att genomföras. Handlingar som inte är listade kommer inte att bli processade, även om de är listad på huvud sidan. type_control_1=Valet ovan kontrollerar den globala beteende mönstret av bakgrunds processen som accepterar förfrågningar att genomföra konfigurationen på denna värd när den får en förfrågan av en fjärr värd, eller på en schemalagd basis. type_directories=Sökvägar listade nedanför kommer att bli skapade med given ägarskap och tillåtelse när de inte existerar. Ägaren, Gruppen och tillåtelse fälten ät tillval. @@ -345,13 +338,10 @@ type_resolve=DNS server IP adressen som du skriver nedanför kommer att använda type_defaultroute=När denna handling körs, kommer konfigurations motor'n att kontrollera nuvarande standard väg mot vägen specificerad nedanför. type_required=Filsystemet listad nedanför kommer att kontrolleras när händelsen körs för att verifiera att de är monterade, och om inte en varnings meddelande kommer att visas. Varje filsystem kommer också att kontrolleras för att se om ledigt utrymme har minskat under minimum, om något. type_disks=$typ_obligatorisk - stop_err=Misslyckades att stoppa Konfigurations Motor demonen stop_epids=Körs inte längre stop_ekill=Misslyckades att döda process : $1 - start_err=Misslyckades att starta Konfigurations Motor demonen - log_create_section=Skapade handling $1 och klass log_create_class=Lade till klass till handling $1 log_modify_class=Modifierade klass i handling $1 @@ -362,7 +352,6 @@ log_start=Startade demon log_stop=Stoppade demon log_push=Ändrade fjärr konfiguration värdar log_prun=Körde värd konfiguration - hosts_title=Webmin CFengine Kluster hosts_hosts=Servrar i Kluster hosts_nohosts=Ingen Webmin server som kör CFengine har blivit definierad ännu. @@ -374,7 +363,6 @@ hosts_rundesc=Klicka på knappen för att få Konfigurations Motorn att köra al hosts_copydesc=Klicka på knappen för att få CFengine Konfiguration från server kopierad till alla servrar ovan, och omedelbart utförd. hosts_opts=Tillval för körande konfiguration hosts_return=server lista - add_title=Lägg till Servrar add_msg=Lägger till $1 .. add_gmsg=Lägger till servrarna till grupp $1 .. @@ -384,7 +372,6 @@ add_echeck=Server $1 har inte konfigurations motor modulen add_ecfengine=CFengine är inte installerad på server $1 add_ok=Har lagt till server $1 ($2 $3) add_eversion=CFengine på server $1 är version $2, men denna Webmin modul stödjer endast versioner $3 . - host_title=Hanterad Server host_header=Hantera CFengine server detaljer host_name=Värd namn @@ -393,10 +380,8 @@ host_delete=Ta bort från hanteringslista host_os=OS från Webmin host_cfg=Nuvarande CFengine konfiguration från $1 host_ver=CFengine version - cluster_title=Kör Konfigurations Motor cluster_header=Köra konfigurations motor på alla värdar på kluster .. cluster_success=Utmatning från CFengine på $1 .. cluster_failed=Misslyckades att köra CFengine på $1 : $2 - this_server=Denna server diff --git a/cfengine/lang/th.auto b/cfengine/lang/th.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/th.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/tr.auto b/cfengine/lang/tr.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/tr.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/uk.auto b/cfengine/lang/uk.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/uk.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/ur.auto b/cfengine/lang/ur.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/ur.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/vi.auto b/cfengine/lang/vi.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/vi.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/zh.auto b/cfengine/lang/zh.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/zh.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/cfengine/lang/zh_TW.auto b/cfengine/lang/zh_TW.auto deleted file mode 100644 index 8ea4e44df..000000000 --- a/cfengine/lang/zh_TW.auto +++ /dev/null @@ -1,402 +0,0 @@ -index_title=Configuration Engine -index_ecommand=The Configuration Engine command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from Configuration Engine command $1. The actual output from the command was : $2 -index_eversion2=The Configuration Engine command $1 on your system is version $2, but this Webmin module only supports versions $3 . -index_econfig=The Configuration Engine config file $1 as not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_version=CFengine version $1 -index_section=Action type -index_classes=Apply to classes -index_details=Action summary for classes -index_active=Active? -index_maybe=Maybe -index_links=Link $1 to $2 -index_links2=Create $1 links -index_directories2=Create $1 directories -index_directories=Create directory $1 -index_control=Run action $1 -index_control2=Run $1 actions -index_editfiles=Edit file $1 -index_editfiles2=Edit $1 files -index_add=Add action of type: -index_cadd=Add class.. -index_return=actions list -index_run=Run Configuration Engine -index_rundesc=Click this button to run the command $1 on this host. All the actions listed above will be executed immediately, where necessary. -index_admit=Allow directory $1 -index_grant=$index_admit -index_deny=Deny directory $1 -index_admit2=Allow $1 directories -index_grant2=$index_admit2 -index_deny2=Deny $1 directories -index_cfrun=Run command $1 -index_groups=Define groups $1 -index_none=No configuration actions are currently defined. -index_files=Set permissions on $1 -index_files2=Set permissions on $1 directories -index_copy=Copy $1 to $2 -index_copy2=Copy $1 directories -index_disable=Disable file $1 -index_disable2=Disable $1 files -index_ignore=Ignore $1 paths -index_procs=Find processes matching $1 -index_procs2=Find $1 process matches -index_shellcommands=Run command $1 -index_shellcommands2=Run $1 commands -index_tidy=Delete files in $1 -index_tidy2=Delete files in $1 directories -index_misc=Mount $1 -index_misc2=Mount $1 NFS filesystems -index_route=Set gateway to $1 -index_required=Check filesystem $1 -index_required2=Check $1 filesystems -index_disks=$index_required -index_disks2=$index_required2 - -edit_title=Edit Settings for Class -edit_create1=Add Action and Class -edit_create2=Add Settings for Class -edit_section=Action type -edit_class=Apply to class -edit_all=Any class -edit_manual=Edit Manually -edit_manualtext=New configuration file text -edit_manualtext2=Configuration file lines $1 to $2 of $3 -edit_header=Class details -edit_links=Symbolic links to create -edit_linkfrom=Link from -edit_linkto=Link to -edit_linktype=All files? -edit_linkover=Overwrite? -edit_dir=Directory to create -edit_dirmode=Permissions -edit_dirowner=Owner -edit_dirgroup=Group -edit_actionseq=Actions to run, in order -edit_actionadd=Add selected action -edit_controldef=Global definition -edit_controlvalue=Values -edit_admit=Grant access to directories -edit_grant=$edit_admit -edit_deny=Deny access to directories -edit_grantdir=Directory -edit_granthosts=Hosts and host patterns -edit_groups=Group definitions -edit_groupname=Group name -edit_groupmems=Members -edit_controlrun=Command to run when requested -edit_controlelapsed=Minimum minutes between runs -edit_controlmax=Maximum concurrent runs -edit_controlauto=Command to run on schedule -edit_controlinterval=Minutes between scheduled runs -edit_controldom=Domain name -edit_controllog=Log all connections? -edit_controlallow=Allow connections from -edit_controlall=All addresses -edit_controldeny=Deny connections from -edit_controlnone=No addresses -edit_controlskip=Skip reverse IP address lookup for -edit_none=None -edit_filesdir=Check files in directory -edit_filesowner=Set owner to -edit_filesgroup=Set group to -edit_nochange=Don't change -edit_filesmode=Set permissions to -edit_filesrec=Recursion level -edit_filesinf=Infinite -edit_filesinclude=Only check files matching -edit_filesall=All files -edit_filesexclude=Don't check files matching -edit_filesnone=No files -edit_filesacl=Set ACL to -edit_filesact=Action to take -edit_files_fixall=Fix all files -edit_files_fixdirs=Fix directories -edit_files_fixplain=Fix normal files -edit_files_touch=Touch files -edit_files_warnall=Warn about all files -edit_files_warndirs=Warn about directories -edit_files_warnplain=Warn about normal files -edit_files_linkchildren=Link children -edit_files_create=Create file -edit_files_alert=Display filenames -edit_files_compress=Compress files -edit_filesnew=Add options for another directory. -edit_copydir=Source file or directory -edit_copydest=Copy to destination -edit_copysize=Size restriction -edit_copysize1=Equal to -edit_copysize2=Smaller than -edit_copysize3=Bigger than -edit_copybackup=Backup overwritten files? -edit_copyserver=Copy from server -edit_copyforce=Copy even if up to date? -edit_local=This host -edit_copynew=Add options for another copy source -edit_copypurge=Delete files that no longer exist in source? -edit_copyact=Copy action mode -edit_copy_fix=Copy files -edit_copy_warn=Display warning -edit_copy_silent=Copy silently -edit_disfile=File to disable -edit_distype=Only disable if file type is -edit_dis_all=Any type -edit_dis_plain=File -edit_dis_file=Non-special file -edit_dis_link=Symlink -edit_dissize=Only disable if size is -edit_disrot=Action when disabling -edit_disrot0=Rename with .cfdisabled appended -edit_disrot1=Truncate file -edit_disrot2=Rotate $1 times -edit_disnew=Add a new file to disable -edit_editfile=File to edit -edit_editscript=Editing script -edit_editnew=Add a new file to edit -edit_ignore=Filenames to ignore -edit_proc=Find processes matching -edit_procnew=Add a new process pattern to match -edit_procsig=Send signal to processes -edit_procact=Signal action mode -edit_proc_signal=Signal matching processes -edit_proc_warn=Just display matches -edit_proc_bymatch=Signal warning processes -edit_procmat=Warn if number of processes is not -edit_procmat0=Never warn -edit_procmat2=Less than -edit_procmat1=Exactly -edit_procmat3=More than -edit_procrestart=Command to run after kill -edit_procowner=Run command as user -edit_procgroup=Run command as group -edit_cmd=Shell command to run -edit_cmdowner=Run as user -edit_cmdgroup=Run as group -edit_cmdtimeout=Timeout -edit_tidydir=Directory to tidy -edit_tidynew=Add a new directory to tidy -edit_tidypat=Delete files matching -edit_tidysize=Size restriction -edit_tidysize0=Any file size -edit_tidysize1=Empty files -edit_tidysize2=Files larger than -edit_tidyage=Age restriction -edit_tidyage1=Any age -edit_tidyage0=$1 is more than $2 days -edit_tidyatime=Access time -edit_tidymtime=Modification time -edit_tidyctime=Contents time -edit_miscsrc=NFS server and path -edit_miscdest=Mount directory -edit_miscmode=Mount options -edit_resns=DNS servers -edit_resother=Other resolv.conf lines -edit_route=Default gateway -edit_reqfs=Filesystem to check -edit_reqfree=Minimum free space - -save_err=Failed to save class -save_eclass=Missing or invalid class name -save_elinkfrom=Missing or invalid from for symlink $1 -save_elinkto=Missing or invalid to for symlink $1 -save_edir=Invalid directory $1 -save_edirmode=Invalid octal mode for directory $1 -save_edirowner=Invalid owner for directory $1 -save_edirgroup=Invalid group for directory $1 -save_econtroldef=Invalid name for global definition $1 -save_egrantdir=Invalid path for directory $1 -save_egranthosts=No hosts entered for directory $1 -save_egranthost='$1' is not a valid host or host pattern -save_egroupname=Invalid name for group $1 -save_econtrolrun=Command to run '$1' does not exist -save_econtrolelapsed=Invalid minimum minutes between runs -save_econtrolauto=Command to run automatically '$1' does not exist -save_econtrolinterval=Invalid number of minutes between scheduled runs -save_econtrolallow=No addresses to allow entered -save_econtroldeny=No addresses to deny entered -save_econtrolskip=No addresses to skip reverse lookups on entered -save_econtroldomain=Invalid domain name -save_efilesdir=Missing directory $1 -save_efilesowner=Missing or invalid owner for files in directory $1 -save_efilesgroup=Missing or invalid group for files in directory $1 -save_efilesmode=Missing or invalid permissions for files in directory $1 -save_efilesrec=Missing or invalid integer recursion level for files in directory $1 -save_efilesinclude=Missing or invalid pattern for files to check in directory $1 -save_efilesexclude=Missing or invalid pattern for files not to check in directory $1 -save_efilesacl=Missing or invalid ACL name for files in directory $1 -save_ecopydir=Missing source file or directory $1 -save_ecopydest=Missing destination for copy of $1 -save_ecopyserver=Missing or invalid server for copy of $1 -save_ecopyowner=Missing or invalid owner for copy of $1 -save_ecopygroup=Missing or invalid group for copy of $1 -save_ecopymode=Missing or invalid permissions for copy of $1 -save_ecopyrec=Missing or invalid integer recursion level for copy of $1 -save_ecopysize=Missing or invalid size for copy of $1 -save_edisfile=Missing disabled filename $1 -save_edisrot=Missing or invalid number of rotations for file $1 -save_edissize=Missing or invalid size for file $1 -save_eeditfile=Missing file to edit $1 -save_eeditscript=Missing editor script for file $1 -save_eproc=Missing pattern for process match $1 -save_eprocrestart=Missing restart command for processes matching $1 -save_eprocowner=Missing or invalid user for processes matching $1 -save_eprocgroup=Missing or invalid group for processes matching $1 -save_eprocmat=Missing or invalid number of processes matching $1 -save_ecmd=Missing shell command $1 -save_ecmdowner=Invalid owner for shell command $1 -save_ecmdgroup=Invalid group for shell command $1 -save_ecmdtimeout=Invalid timeout for shell command $1 -save_etidy=Missing or invalid directory to tidy $1 -save_etidyrec=Missing or invalid integer recursion level for directory $1 -save_etidypat=Missing or invalid file pattern for directory $1 -save_etidysize=Missing or invalid file size for directory $1 -save_etidyage=Missing or invalid number of days for directory $1 -save_emiscsrc=Missing or invalid NFS server and path $1 -save_emiscdest=Missing or invalid mount directory for $1 -save_emiscmode=Invalid mount options for $1 -save_eroute=Missing or invalid default gateway -save_ereq=Invalid filesystem to check $1 -save_ereqfree=Missing or invalid minimum free space for $1 - -section_groups=Define groups -section_classes=$section_groups -section_control_0=Master control -section_control_1=Configuration daemon options -section_homeservers=Home directories servers -section_binservers=Binary files servers -section_mailserver=Mail servers -section_mountables=Mountable filesystems -section_broadcast=Set broadcast address -section_resolve=Setup DNS resolution -section_defaultroute=Set default route -section_directories=Create directories -section_miscmounts=Mount other NFS filesystems -section_files=Set file permissions -section_ignore=Files to ignore -section_tidy=Tidy up directories -section_links=Create symbolic links -section_disable=Disable files -section_shellcommands=Run shell commands -section_editfiles=Edit files -section_processes=Manage processes -section_copy=Copy files -section_admit=Allowed directories -section_grant=$section_admit -section_deny=Denied directories -section_required=Check Filesystems -section_disks=$section_required - -run_title=Run Configuration Engine -run_desc=This page can be used to run the Configuration Engine on this host. When run, all the actions that you have configured will be carried out where necessary. -run_header=Options for running CFengine on this host -run_dry=Only show what would be done? -run_noifc=Can change network interfaces? -run_nomnt=Can mount filesystems? -run_nocmd=Can execute shell commands? -run_notidy=Can tidy up directories? -run_nolinks=Can create symbolic links? -run_verbose=Show verbose output? -run_exec=Running command $1 .. -run_ok=Run Now - -cfd_title=Configuration Engine Daemon -cfd_stop=Stop Configuration Engine Daemon -cfd_stopdesc=Click this button to stop the running Configuration Engine daemon. This will prevent other hosts from running the configuration on this server, and stop the scheduled running of the configuration. -cfd_start=Start Configuration Engine Daemon -cfd_startdesc=Click this button to start the Configuration Engine daemon with the settings above. This will allow other hosts to run the configuration on this server, and start the scheduled running of the configuration (if enabled). -cfd_return=daemon options -cfd_none=No settings for the Configuration Engine daemon has been created yet. -cfd_ecmd=The Configuration Engine daemon command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -push_title=Remote Configuration Hosts -push_header=Configuration server distribution options -push_domain=Domain name -push_users=Users who can run cfrun -push_host=Client hostname -push_opts=CFengine options for client -push_push=Run Host Configurations -push_pushdesc=Click this button to run the Configuration Engine on each of the hosts listed above, using the command $1. The local configuration from each host will be used for processing, unless you have arranged for the master configuration to be distributed to each host. -push_err=Failed to save server options -push_edomain=Missing or invalid domain name -push_ehost='$1' is not a valid hostname -push_ethis='$1' is this host! -push_return=remote configuration hosts -push_title2=Run Host Configurations -push_exec=Running host configurations with command $1 .. -push_ecmd=The Configuration Engine remote execution command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. - -type_control_0=The field below lists the actions that are executed when the configuration engine runs, in the order that they will be executed. Actions which are not listed will not be processed, even if they are listed on the main page. -type_control_1=The options below control the global behaviour of the background process that accepts requests to execute the configuration on this host when requested by a remote host, or on a fixed schedule. -type_directories=The directories listed below will be created with the given ownership and permissions when they do not exist. The owner, group and permissions fields are optional. -type_links=The symbolic links listed below will be created where they do not currently exist. If a link already exists but points to a different destination, it will not normally be changed. -type_admit=The configuration engine daemon will only grant access to directory listed below by the hosts listed next to each directory. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_grant=$type_admit -type_deny=Directories listed below will be denied access to by the hosts listed next to each directory, even if they are listed in an Allowed directories action. Hosts can be entered as an IP address, hostname or host pattern (like *.foo.com). -type_groups=Use the table below to define additional groups of hosts that can be used elsewhere in the configuration as class names. Groups can also contain shell commands in quotes that are executed to determine if the group evaluates to true or false. -type_classes=$type_group -type_copy=Each of the files or directories (and their contents) listed below will be copied to the chosen destination, when necessary. You can also choose to copy from a remote host, as long as that host is running the configuration engine daemon and allows this host to copy files. -type_disable=The files listed below will be checked to see if it exists and meets the selected size and type criteria, and if so disabled by either renaming or truncation. -type_editfiles=The text area below can be used to enter a script that edits the selected file, adding, deleting or updating lines where necessary. For the syntax of this script language, see the full CFengine documentation. -type_ignore=Any files or directories entered below will be ignored by all 'Copy files', 'Set permissions' and 'Tidy up directories' actions. Each entry can be a full path, a shell-style regular expression or a filename. -type_processes=Use the field below to search for processes matching the given pattern, and optionally send them a signal to kill them. When a process is killed, you can also specify a command to be run to restart it. -type_shellcommands=The commands listed below will be executed every time the configuration engine is run. The user and group fields are optional - if nothing is entered, the command will be executed as root. The timeout field is also optional - if no timeout is given, CFengine will wait forever until the command is complete. -type_tidy=The directories listed below will be scanned for files matching the selected name, age and time criteria each time CFengine is run. Any files found will be deleted, with no backup made. -type_miscmounts=NFS filesystem mounts listed below will be checked and mounted if necessary when CFengine is run. The NFS server and path field must be entered in the standard form of servername:/path/name. The mount options must be in the same format as used in the /etc/fstab file, and are optional. -type_resolve=The DNS server IP addresses that you enter below will be used to update the /etc/resolv.conf file when this action is run, by adding lines for any listed nameservers that are not yet in the file. -type_defaultroute=When this action is run, the configuration engine will check the current default route against the gateway specified below. -type_required=The filesystems listed below will be checked when this action is run to verify that they are mounted, and if not a warning message will be displayed. Each filesystem will also be checked to see if its free space has fallen below the set minimum, if any. -type_disks=$type_required - -stop_err=Failed to stop Configuration Engine daemon -stop_epids=No longer running -stop_ekill=Failed to kill process : $1 - -start_err=Failed to start Configuration Engine daemon - -log_create_section=Created action $1 and class -log_create_class=Added class to action $1 -log_modify_class=Modified class in action $1 -log_delete_class=Removed class from action $1 -log_delete_section=Deleted section $1 -log_run=Ran configuration engine -log_start=Started daemon -log_stop=Stopped daemon -log_push=Changed remote configuration hosts -log_prun=Ran host configurations - -hosts_title=Webmin CFengine Cluster -hosts_hosts=Servers in Cluster -hosts_nohosts=No Webmin servers running CFengine have been defined yet. -hosts_add=Add server -hosts_gadd=Add servers in group -hosts_run=Run Configuration Engine -hosts_copy=Copy and Run Configuration -hosts_rundesc=Click this button to have the Configuration Engine run on all the servers listed above, using their current configurations. -hosts_copydesc=Click this button to have the CFengine configuration from this server copied to all the servers above, and immediately executed. -hosts_opts=Options for running configurations -hosts_return=servers list - -add_title=Add Servers -add_msg=Adding $1 .. -add_gmsg=Adding servers in group $1 .. -add_err=Failed to add server -add_gerr=Failed to add group -add_echeck=Server $1 does not have the configuration engine module -add_ecfengine=CFengine is not installed on server $1 -add_ok=Added server $1 ($2 $3) -add_eversion=CFengine on server $1 is version $2, but this Webmin module only supports versions $3 . - -host_title=Managed Server -host_header=Managed CFengine server details -host_name=Host name -host_type=Server type -host_delete=Remove from managed list -host_os=OS from Webmin -host_cfg=Current CFengine configuration from $1 -host_ver=CFengine version - -cluster_title=Run Configuration Engine -cluster_header=Running configuration engine on all hosts in cluster .. -cluster_success=Output from CFengine on $1 .. -cluster_failed=Failed to run CFengine on $1 : $2 - -this_server=this server diff --git a/change-user/lang/de b/change-user/lang/de index 8bafd628b..ba6706deb 100644 --- a/change-user/lang/de +++ b/change-user/lang/de @@ -41,4 +41,4 @@ change_eoverlay2=Das ausgewählte Thema-Overlay ist nicht mit dem gewählten UI- acl_lang=Sprache ändern dürfen? acl_locale=Locale ändern dürfen? acl_theme=Thema ändern dürfen? -acl_pass=Passwort ändern dürfen (wenn in Webmin gesetzt)? +acl_pass=Passwort ändern dürfen (wenn in Webmin gesetzt)? \ No newline at end of file diff --git a/change-user/lang/uk b/change-user/lang/uk index 87deddce7..08370d2eb 100644 --- a/change-user/lang/uk +++ b/change-user/lang/uk @@ -1,23 +1,23 @@ index_title=Змінити мову і тему -index_lang=Мова -index_locale=Локаль -index_locale2=Формат дат -index_theme=Тема -index_langglobal2=Глобальна мова .. $1 ($2) -index_langset=персональний вибір .. -index_localeglobal2=Глобальна локаль .. $1 ($2) -index_localeset=Особистий вибір.. index_dateformatglobal2=Глобальний формат дат .. $1 index_dateformatset=Особистий вибір.. -index_overlay=Накладання теми -index_overlaydef=Немає - використовувати теми за замовчуванням +index_lang=Мова +index_langglobal2=Глобальна мова .. $1 ($2) +index_langset=персональний вибір .. index_themeglobal=Глобальна тема ($1) index_themeset=Персональний вибір .. +index_locale=Локаль +index_locale2=Формат дат +index_localeglobal2=Глобальна локаль .. $1 ($2) +index_localeset=Особистий вибір.. +index_overlay=Накладання теми +index_overlaydef=Немає - використовувати теми за замовчуванням index_pass=Пароль облікового запису Webmin +index_passagain=Повторно введіть пароль index_passleave=Не змінювати index_passset=Установити в.. -index_passagain=Повторно введіть пароль index_ok=Зберегти зміни +index_theme=Тема index_themedef=Стара тема Webmin index_desc2=Цей модуль може бути використаний для зміни $1, тільки для вашого облікового запису Webmin. index_d3=1$, 2$ і 3$ @@ -31,13 +31,12 @@ change_title=Зміна налаштувань change_user=Зміна налаштувань облікового запису Webmin .. change_done=.. готово change_restart=Перезапускаю Webmin .. -change_redirect=Перехід у головне меню .. -change_ecolon=Ваш пароль не може містити символ : -change_epass2=Нові паролі не збігаються -change_epass=Новий пароль недійсний: $1 change_eoverlay=Ви не можете вибрати накладання теми, якщо також не вибрано тему інтерфейсу користувача change_eoverlay2=Вибране накладання теми несумісне з вибраною темою інтерфейсу користувача - +change_epass=Новий пароль недійсний: $1 +change_epass2=Нові паролі не збігаються +change_redirect=Перехід у головне меню .. +change_ecolon=Ваш пароль не може містити символ : acl_lang=Чи можна змінити мову? acl_locale=Чи можна змінити локаль? acl_theme=Може змінювати тему? diff --git a/change-user/lang/uk.auto b/change-user/lang/uk.auto new file mode 100644 index 000000000..0061308f8 --- /dev/null +++ b/change-user/lang/uk.auto @@ -0,0 +1,19 @@ +index_lang=Мова +index_locale=Локаль +index_locale2=Формат дат +index_theme=Тема +index_langglobal2=Глобальна мова.. $1 ($2) +index_localeglobal2=Глобальна мова.. $1 ($2) +index_localeset=Особистий вибір .. +index_dateformatglobal2=Глобальний формат дати.. $1 +index_dateformatset=Особистий вибір .. +index_overlay=Накладання тем +index_overlaydef=Ні - використовуйте параметри за замовчуванням +index_passagain=Повторно введіть пароль + +change_epass2=Нові паролі не збігаються +change_epass=Новий пароль недійсний : $1 +change_eoverlay=Ви не можете вибрати накладку теми, якщо також не обрана тема інтерфейсу користувача +change_eoverlay2=Вибране накладання теми не сумісне з обраною темою інтерфейсу користувача + +acl_locale=Чи можна змінити мову? diff --git a/change-user/lang/zh b/change-user/lang/zh index 6a16db26e..767e4ae11 100644 --- a/change-user/lang/zh +++ b/change-user/lang/zh @@ -42,3 +42,5 @@ acl_lang=是否修改语言? acl_locale=是否更改区域设置吗？ acl_theme=是否修改页面风格？ acl_pass=是否修改密码(当设定webmin时)? + +__norefs=1 diff --git a/cluster-copy/lang/de b/cluster-copy/lang/de index 3d7d5244f..9006d3f7e 100644 --- a/cluster-copy/lang/de +++ b/cluster-copy/lang/de @@ -64,4 +64,4 @@ email_subject_succeeded=Cluster-Kopie von $1 erfolgreich email_subject_failed=Cluster-Kopie von $1 fehlgeschlagen delete_err=Fehler beim Löschen der Kopien -delete_enone=Nichts ausgewählt +delete_enone=Nichts ausgewählt \ No newline at end of file diff --git a/cluster-cron/lang/de b/cluster-cron/lang/de index aff193f82..03e3f12c6 100644 --- a/cluster-cron/lang/de +++ b/cluster-cron/lang/de @@ -34,4 +34,4 @@ log_delete_l=Cluster-Cron-Job $2 für $1 gelöscht log_deletes=$1 Cluster-Cron-Jobs gelöscht delete_err=Fehler beim Löschen der Cluster-Cron-Jobs -delete_enone=Keine ausgewählt +delete_enone=Keine ausgewählt \ No newline at end of file diff --git a/cluster-passwd/lang/de b/cluster-passwd/lang/de index 4800abba0..126f29a2d 100644 --- a/cluster-passwd/lang/de +++ b/cluster-passwd/lang/de @@ -5,4 +5,4 @@ index_hosts=Alle Passwortänderungen, die mit diesem Modul durchgeführt werden, passwd_err=Fehler beim Ändern des Passworts passwd_title=Passwortänderung passwd_on=Passwort wird auf $1 geändert .. -passwd_euser=Benutzer existiert nicht! +passwd_euser=Benutzer existiert nicht! \ No newline at end of file diff --git a/cluster-shell/lang/de b/cluster-shell/lang/de index c1f61de9d..1f03b9a84 100644 --- a/cluster-shell/lang/de +++ b/cluster-shell/lang/de @@ -19,4 +19,4 @@ run_enone=Keine Server zum Ausführen ausgewählt log_clear=Befehlsverlauf gelöscht log_run=$1 auf $2 Servern ausgeführt -log_run_l=$1 auf $2 ausgeführt +log_run_l=$1 auf $2 ausgeführt \ No newline at end of file diff --git a/cluster-shutdown/lang/af.auto b/cluster-shutdown/lang/af.auto index e3fbeb21e..76bcad9c7 100644 --- a/cluster-shutdown/lang/af.auto +++ b/cluster-shutdown/lang/af.auto @@ -14,7 +14,6 @@ index_smtp=Stuur via SMTP-bediener index_this=Hierdie bediener index_nu=Geen gebruiker gestel nie index_nl=Aanmelding misluk - shut_title=Sit bedieners af shut_rusure=Is u seker dat u die $1 geselekteerde bedieners onmiddellik wil afsluit? shut_ok=Ja, doen dit @@ -23,12 +22,10 @@ shut_failed=.. misluk! $1 shut_done=.. klaar. shut_sel=Die geselekteerde bedieners is : shut_ecannot=U mag nie bedieners afsluit nie - reboot_title=Herlaai bedieners reboot_rusure=Is u seker dat u die $1 geselekteerde bedieners onmiddellik wil herbegin? reboot_doing=Herlaai van $1 weer. reboot_ecannot=U mag nie bedieners herlaai nie - sched_err=Kon nie outomatiese bedienerkontrole opstel nie sched_eemail=E-posadres ontbreek sched_esmtp=Ontbrekende of ongeldige SMTP-bediener diff --git a/cluster-shutdown/lang/ar.auto b/cluster-shutdown/lang/ar.auto index 6abf44fd6..684354c02 100644 --- a/cluster-shutdown/lang/ar.auto +++ b/cluster-shutdown/lang/ar.auto @@ -14,7 +14,6 @@ index_smtp=إرسال عبر خادم SMTP index_this=هذا الخادم index_nu=لم يتم تعيين مستخدم index_nl=فشل تسجيل الدخول - shut_title=إيقاف تشغيل الخوادم shut_rusure=هل تريد بالتأكيد إغلاق الخوادم المحددة$1 على الفور؟ shut_ok=نعم ، افعلها @@ -23,12 +22,10 @@ shut_failed=.. فشل! $1 shut_done=.. فعله. shut_sel=الخوادم المحددة هي : shut_ecannot=لا يسمح لك بإغلاق الخوادم - reboot_title=إعادة تشغيل الخوادم reboot_rusure=هل تريد بالتأكيد إعادة تشغيل$1 من الخوادم المحددة؟ reboot_doing=إعادة التشغيل$1 .. reboot_ecannot=لا يسمح لك بإعادة تشغيل الخوادم - sched_err=فشل في إعداد التحقق التلقائي من الخادم sched_eemail=عنوان البريد الإلكتروني مفقود sched_esmtp=خادم SMTP مفقود أو غير صالح diff --git a/cluster-shutdown/lang/be.auto b/cluster-shutdown/lang/be.auto index 486901cf3..577173441 100644 --- a/cluster-shutdown/lang/be.auto +++ b/cluster-shutdown/lang/be.auto @@ -14,7 +14,6 @@ index_smtp=Адправіць праз SMTP-сервер index_this=Гэты сервер index_nu=Карыстальнік не ўсталяваны index_nl=Уваход не атрымаўся - shut_title=Выключыце серверы shut_rusure=Вы ўпэўнены, што хочаце неадкладна выключыць выбраныя серверы $1 ? shut_ok=Так, зрабі @@ -23,12 +22,10 @@ shut_failed=.. няўдала! $1 shut_done=.. малайчына. shut_sel=Выбраныя серверы : shut_ecannot=Вам не дазволена закрываць серверы - reboot_title=Перазагрузка сервераў reboot_rusure=Вы ўпэўнены, што хочаце неадкладна перазагрузіць абраныя серверы $1 ? reboot_doing=Перазагрузка $1. reboot_ecannot=Вам не дазволена перазагрузка сервераў - sched_err=Не атрымалася наладзіць аўтаматычную праверку сервера sched_eemail=Адсутнічае адрас электроннай пошты sched_esmtp=Адсутнічае ці недапушчальны сервер SMTP diff --git a/cluster-shutdown/lang/bg.auto b/cluster-shutdown/lang/bg.auto index 2f7e9457c..9b46f4f2c 100644 --- a/cluster-shutdown/lang/bg.auto +++ b/cluster-shutdown/lang/bg.auto @@ -14,7 +14,6 @@ index_smtp=Изпращане чрез SMTP сървър index_this=Този сървър index_nu=Няма зададен потребител index_nl=Неуспешно влизане - shut_title=Изключете сървърите shut_rusure=Сигурни ли сте, че искате незабавно да изключите избраните $1 сървъри? shut_ok=Да, Направи го @@ -23,12 +22,10 @@ shut_failed=.. се провали! $1 shut_done=.. Свършен. shut_sel=Избраните сървъри са : shut_ecannot=Нямате право да изключвате сървърите - reboot_title=Рестартирайте сървъри reboot_rusure=Сигурни ли сте, че искате незабавно да рестартирате избраните сървъри $1 ? reboot_doing=Рестартиране на $1 .. reboot_ecannot=Нямате право да рестартирате сървъри - sched_err=Неуспешна настройка на автоматичната проверка на сървъра sched_eemail=Липсващ имейл адрес sched_esmtp=Липсващ или невалиден SMTP сървър diff --git a/cluster-shutdown/lang/ca.auto b/cluster-shutdown/lang/ca.auto index a4d604991..dd20df004 100644 --- a/cluster-shutdown/lang/ca.auto +++ b/cluster-shutdown/lang/ca.auto @@ -14,7 +14,6 @@ index_smtp=Enviar mitjançant servidor SMTP index_this=Aquest servidor index_nu=No s'ha definit cap usuari index_nl=Error a l'iniciar sessió - shut_title=Servidors d'apagada shut_rusure=Esteu segur que voleu tancar immediatament els servidors seleccionats $1 ? shut_ok=Sí, fes-ho @@ -23,12 +22,10 @@ shut_failed=.. fracassat! $1 shut_done=.. fet. shut_sel=Els servidors seleccionats són : shut_ecannot=No teniu permès d'apagar els servidors - reboot_title=Reinicieu els servidors reboot_rusure=Esteu segur que voleu reiniciar immediatament els servidors seleccionats $1 ? reboot_doing=S'ha reiniciat $1. reboot_ecannot=No teniu permís de reiniciar servidors - sched_err=No s'ha pogut configurar la verificació automàtica del servidor sched_eemail=Falta una adreça de correu electrònic sched_esmtp=Falta el servidor SMTP no vàlid diff --git a/cluster-shutdown/lang/cs.auto b/cluster-shutdown/lang/cs.auto index 059298ee0..158bc1da4 100644 --- a/cluster-shutdown/lang/cs.auto +++ b/cluster-shutdown/lang/cs.auto @@ -14,7 +14,6 @@ index_smtp=Odeslat přes SMTP server index_this=Tento server index_nu=Žádný uživatel není nastaven index_nl=Přihlášení selhalo - shut_title=Vypněte servery shut_rusure=Opravdu chcete okamžitě vypnout vybrané servery $1 ? shut_ok=Ano, udělej to @@ -23,12 +22,10 @@ shut_failed=.. selhalo! $1 shut_done=.. Hotovo. shut_sel=Vybrané servery jsou : shut_ecannot=Není dovoleno vypínat servery - reboot_title=Restartujte servery reboot_rusure=Opravdu chcete okamžitě restartovat vybrané servery $1 ? reboot_doing=Restartování $1 .. reboot_ecannot=Není dovoleno restartovat servery - sched_err=Nastavení automatické kontroly serveru se nezdařilo sched_eemail=Chybí e-mailová adresa sched_esmtp=Chybějící nebo neplatný server SMTP diff --git a/cluster-shutdown/lang/da.auto b/cluster-shutdown/lang/da.auto index 747a507bc..ce0bc8f28 100644 --- a/cluster-shutdown/lang/da.auto +++ b/cluster-shutdown/lang/da.auto @@ -14,7 +14,6 @@ index_smtp=Send via SMTP-server index_this=Denne server index_nu=Intet brugersæt index_nl=Login mislykkedes - shut_title=Luk servere ned shut_rusure=Er du sikker på, at du straks vil lukke de $1 valgte servere ned? shut_ok=Ja, gør det @@ -23,12 +22,10 @@ shut_failed=.. mislykkedes! $1 shut_done=.. Færdig. shut_sel=De valgte servere er : shut_ecannot=Du må ikke lukke servere ned - reboot_title=Genstart servere reboot_rusure=Er du sikker på, at du straks vil genstarte de $1 valgte servere? reboot_doing=Genstart $1 .. reboot_ecannot=Du har ikke tilladelse til at genstarte servere - sched_err=Kunne ikke konfigurere automatisk serverkontrol sched_eemail=Manglende e-mail-adresse sched_esmtp=Manglende eller ugyldig SMTP-server diff --git a/cluster-shutdown/lang/de b/cluster-shutdown/lang/de index 6070ee635..0f24e071d 100644 --- a/cluster-shutdown/lang/de +++ b/cluster-shutdown/lang/de @@ -34,4 +34,4 @@ sched_eemail=Fehlende E-Mail-Adresse sched_esmtp=Fehlender oder ungültiger SMTP-Server sched_title=Automatische Serverüberprüfung sched_enabled=Automatische Überprüfung aller Server alle fünf Minuten ist jetzt aktiviert. -sched_disabled=Automatische Überprüfung aller Server ist jetzt deaktiviert. +sched_disabled=Automatische Überprüfung aller Server ist jetzt deaktiviert. \ No newline at end of file diff --git a/cluster-shutdown/lang/el.auto b/cluster-shutdown/lang/el.auto index a06175cc7..8425f31e0 100644 --- a/cluster-shutdown/lang/el.auto +++ b/cluster-shutdown/lang/el.auto @@ -14,7 +14,6 @@ index_smtp=Αποστολή μέσω διακομιστή SMTP index_this=Αυτός ο διακομιστής index_nu=Δεν έχει οριστεί χρήστης index_nl=Η σύνδεση απέτυχε - shut_title=Τερματίστε τους διακομιστές shut_rusure=Είστε βέβαιοι ότι θέλετε να απενεργοποιήσετε αμέσως τους επιλεγμένους διακομιστές $1 ; shut_ok=Ναι Κάνε το @@ -23,12 +22,10 @@ shut_failed=.. απέτυχε! $1 shut_done=.. Ολοκληρώθηκε. shut_sel=Οι επιλεγμένοι διακομιστές είναι : shut_ecannot=Δεν επιτρέπεται να κλείνετε διακομιστές - reboot_title=Επανεκκινήστε τους διακομιστές reboot_rusure=Είστε βέβαιοι ότι θέλετε να επανεκκινήσετε αμέσως τους επιλεγμένους διακομιστές $1 ; reboot_doing=Επανεκκίνηση $1 reboot_ecannot=Δεν επιτρέπεται η επανεκκίνηση διακομιστών - sched_err=Δεν ήταν δυνατή η ρύθμιση του αυτόματου ελέγχου διακομιστή sched_eemail=Λείπει η διεύθυνση ηλεκτρονικού ταχυδρομείου sched_esmtp=Έλλειψη ή μη έγκυρος διακομιστής SMTP diff --git a/cluster-shutdown/lang/es.auto b/cluster-shutdown/lang/es.auto index bed7675ec..bd864c266 100644 --- a/cluster-shutdown/lang/es.auto +++ b/cluster-shutdown/lang/es.auto @@ -14,7 +14,6 @@ index_smtp=Enviar a través del servidor SMTP index_this=Este servidor index_nu=Ningún usuario configurado index_nl=error de inicio de sesion - shut_title=Apagar servidores shut_rusure=¿Está seguro de que desea cerrar inmediatamente los servidores seleccionados $1 ? shut_ok=Sí, hazlo @@ -23,12 +22,10 @@ shut_failed=.. ¡ha fallado! $1 shut_done=.. hecho. shut_sel=Los servidores seleccionados son : shut_ecannot=No tiene permiso para cerrar servidores - reboot_title=Reiniciar servidores reboot_rusure=¿Está seguro de que desea reiniciar inmediatamente los servidores seleccionados $1 ? reboot_doing=Reiniciando $1 .. reboot_ecannot=No tiene permiso para reiniciar servidores - sched_err=Error al configurar la comprobación automática del servidor sched_eemail=Falta la dirección de correo electrónico sched_esmtp=Servidor SMTP faltante o no válido diff --git a/cluster-shutdown/lang/eu.auto b/cluster-shutdown/lang/eu.auto index ed321aa3c..ec82db72a 100644 --- a/cluster-shutdown/lang/eu.auto +++ b/cluster-shutdown/lang/eu.auto @@ -14,7 +14,6 @@ index_smtp=Bidali SMTP zerbitzariaren bidez index_this=Zerbitzari hau index_nu=Ez da erabiltzailerik ezarri index_nl=Errorea saioa hastean - shut_title=Itzali Zerbitzariak shut_rusure=Ziur zaude hautatutako $1 zerbitzariak berehala itzali nahi dituzula? shut_ok=Bai, egin ezazu @@ -23,12 +22,10 @@ shut_failed=.. huts egin du! $1 shut_done=.. egin. shut_sel=Hautatutako zerbitzariak hauek dira : shut_ecannot=Ezin duzu zerbitzariak itzali - reboot_title=Berrabiarazi zerbitzariak reboot_rusure=Ziur hautatutako $1 zerbitzariak berehala berrabiarazi nahi duzula? reboot_doing=$1 berrabiarazten da. reboot_ecannot=Ezin duzu zerbitzariak berrabiarazi - sched_err=Ezin izan da zerbitzariaren egiaztapen automatikoa konfiguratu sched_eemail=Helbide elektronikoa falta da sched_esmtp=SMTP zerbitzari falta edo baliogabea diff --git a/cluster-shutdown/lang/fa.auto b/cluster-shutdown/lang/fa.auto index 09dd4c671..46d00d6f7 100644 --- a/cluster-shutdown/lang/fa.auto +++ b/cluster-shutdown/lang/fa.auto @@ -14,7 +14,6 @@ index_smtp=ارسال از طریق سرور SMTP index_this=این سرور index_nu=هیچ مجموعه ای از کاربر وجود ندارد index_nl=ورود ناموفق بود - shut_title=خاموش کردن سرورها shut_rusure=آیا مطمئن هستید که می خواهید سرورهای$1 انتخاب شده را فوراً خاموش کنید؟ shut_ok=بله ، آن را انجام دهید @@ -23,12 +22,10 @@ shut_failed=.. ناموفق! $1 shut_done=.. انجام شده. shut_sel=سرورهای انتخاب شده عبارتند از : shut_ecannot=شما مجاز به خاموش کردن سرورها نیستید - reboot_title=راه اندازی مجدد سرورها reboot_rusure=آیا مطمئن هستید که می خواهید سرورهای$1 انتخاب شده را فوراً راه اندازی کنید؟ reboot_doing=راه اندازی مجدد$1 .. reboot_ecannot=شما مجاز به راه اندازی مجدد سرورها نیست - sched_err=تنظیم خودکار کنترل سرور انجام نشد sched_eemail=آدرس ایمیل موجود نیست sched_esmtp=سرور SMTP موجود یا نامعتبر است diff --git a/cluster-shutdown/lang/fi.auto b/cluster-shutdown/lang/fi.auto index 98dcf735d..ddc1f4715 100644 --- a/cluster-shutdown/lang/fi.auto +++ b/cluster-shutdown/lang/fi.auto @@ -14,7 +14,6 @@ index_smtp=Lähetä SMTP-palvelimen kautta index_this=Tämä palvelin index_nu=Ei käyttäjän asetusta index_nl=Kirjautuminen epäonnistui - shut_title=Sammuta palvelimet shut_rusure=Haluatko varmasti sammuttaa valitut $1 palvelimet välittömästi? shut_ok=Kyllä tee se @@ -23,12 +22,10 @@ shut_failed=.. epäonnistui! $1 shut_done=.. valmis. shut_sel=Valitut palvelimet ovat : shut_ecannot=Et voi sulkea palvelimia - reboot_title=Käynnistä palvelimet uudelleen reboot_rusure=Haluatko varmasti uudestaan käynnistää valitut $1 palvelimet välittömästi? reboot_doing=Käynnistetään $1 .. reboot_ecannot=Palvelimia ei saa käynnistää uudelleen - sched_err=Automaattisen palvelimen tarkistuksen määrittäminen epäonnistui sched_eemail=Puuttuu sähköpostiosoite sched_esmtp=Puuttuva tai virheellinen SMTP-palvelin diff --git a/cluster-shutdown/lang/fr.auto b/cluster-shutdown/lang/fr.auto index 7a3649a60..a2edc6344 100644 --- a/cluster-shutdown/lang/fr.auto +++ b/cluster-shutdown/lang/fr.auto @@ -14,7 +14,6 @@ index_smtp=Envoyer via un serveur SMTP index_this=Ce serveur index_nu=Aucun ensemble d'utilisateurs index_nl=Échec de la connexion - shut_title=Arrêter les serveurs shut_rusure=Voulez-vous vraiment arrêter immédiatement les serveurs $1 sélectionnés? shut_ok=Oui fais le @@ -23,12 +22,10 @@ shut_failed=.. échoué! $1 shut_done=.. terminé. shut_sel=Les serveurs sélectionnés sont : shut_ecannot=Vous n'êtes pas autorisé à arrêter les serveurs - reboot_title=Redémarrez les serveurs reboot_rusure=Voulez-vous vraiment redémarrer immédiatement les serveurs $1 sélectionnés? reboot_doing=Redémarrage de $1 .. reboot_ecannot=Vous n'êtes pas autorisé à redémarrer les serveurs - sched_err=Impossible de configurer la vérification automatique du serveur sched_eemail=Adresse e-mail manquante sched_esmtp=Serveur SMTP manquant ou invalide diff --git a/cluster-shutdown/lang/he.auto b/cluster-shutdown/lang/he.auto index a32f86fdf..359a5aae6 100644 --- a/cluster-shutdown/lang/he.auto +++ b/cluster-shutdown/lang/he.auto @@ -14,7 +14,6 @@ index_smtp=שלח באמצעות שרת SMTP index_this=שרת זה index_nu=אין הגדרת משתמש index_nl=ההתחברות נכשלה - shut_title=כבה שרתים shut_rusure=האם אתה בטוח שברצונך לכבות מיד את השרתים שנבחרו $1 ? shut_ok=כן תעשה את זה @@ -23,12 +22,10 @@ shut_failed=.. נכשל! $1 shut_done=.. בוצע. shut_sel=השרתים שנבחרו הם : shut_ecannot=אינך מורשה לכבות שרתים - reboot_title=אתחול שרתים reboot_rusure=האם אתה בטוח שברצונך לאתחל מייד את השרתים שנבחרו $1 ? reboot_doing=מאתחל שוב $1 .. reboot_ecannot=אינך מורשה לאתחל שרתים - sched_err=הגדרת בדיקת שרת אוטומטית נכשלה sched_eemail=כתובת דוא"ל חסרה sched_esmtp=שרת SMTP חסר או לא חוקי diff --git a/cluster-shutdown/lang/hr.auto b/cluster-shutdown/lang/hr.auto index 98b30d965..c0816d3ba 100644 --- a/cluster-shutdown/lang/hr.auto +++ b/cluster-shutdown/lang/hr.auto @@ -14,7 +14,6 @@ index_smtp=Slanje putem SMTP poslužitelja index_this=Ovaj poslužitelj index_nu=Nije postavljen korisnik index_nl=Prijava nije uspjela - shut_title=Isključite poslužitelje shut_rusure=Jeste li sigurni da želite odmah zatvoriti $1 odabrane poslužitelje? shut_ok=Da, učini to @@ -23,12 +22,10 @@ shut_failed=.. neuspjeh! $1 shut_done=.. gotovo. shut_sel=Odabrani poslužitelji su : shut_ecannot=Nije vam dopušteno isključivanje poslužitelja - reboot_title=Ponovno pokrenite poslužitelje reboot_rusure=Jeste li sigurni da želite odmah ponovno pokrenuti $1 odabrane poslužitelje? reboot_doing=Ponovno pokretanje $1 .. reboot_ecannot=Nije vam dopušteno ponovno pokretanje poslužitelja - sched_err=Nije uspjelo postavljanje automatske provjere poslužitelja sched_eemail=Nedostaje adresa e-pošte sched_esmtp=Nedostaje ili nije važeći SMTP poslužitelj diff --git a/cluster-shutdown/lang/hu.auto b/cluster-shutdown/lang/hu.auto index 994f854f4..a771a1594 100644 --- a/cluster-shutdown/lang/hu.auto +++ b/cluster-shutdown/lang/hu.auto @@ -14,7 +14,6 @@ index_smtp=Küldés SMTP szerveren keresztül index_this=Ez a szerver index_nu=Nincs beállítva felhasználó index_nl=Bejelentkezés sikertelen - shut_title=Kiszolgálók leállítása shut_rusure=Biztos benne, hogy azonnal le szeretné állítani a kiválasztott $1 kiszolgálót? shut_ok=Igen, csináld @@ -23,12 +22,10 @@ shut_failed=.. nem sikerült! $1 shut_done=.. Kész. shut_sel=A kiválasztott szerverek : shut_ecannot=Nem szabad kiszolgálókat leállítani - reboot_title=Indítsa újra a kiszolgálókat reboot_rusure=Biztos benne, hogy azonnal elindítja a kiválasztott $1 kiszolgálót? reboot_doing=$1 újraindítása .. reboot_ecannot=A szervereket nem szabad újraindítani - sched_err=Nem sikerült beállítani az automatikus szerverellenőrzést sched_eemail=Hiányzik az e-mail cím sched_esmtp=Hiányzó vagy érvénytelen SMTP szerver diff --git a/cluster-shutdown/lang/it.auto b/cluster-shutdown/lang/it.auto index 567242541..edb178073 100644 --- a/cluster-shutdown/lang/it.auto +++ b/cluster-shutdown/lang/it.auto @@ -14,7 +14,6 @@ index_smtp=Invia tramite server SMTP index_this=Questo server index_nu=Nessun utente impostato index_nl=Accesso fallito - shut_title=Spegnere i server shut_rusure=Sei sicuro di voler chiudere immediatamente i server selezionati $1 ? shut_ok=Si fallo @@ -23,12 +22,10 @@ shut_failed=.. fallito! $1 shut_done=.. fatto. shut_sel=I server selezionati sono : shut_ecannot=Non è consentito arrestare i server - reboot_title=Riavvia i server reboot_rusure=Sei sicuro di voler riavviare immediatamente i server selezionati $1 ? reboot_doing=Riavvio $1 .. reboot_ecannot=Non è consentito riavviare i server - sched_err=Impossibile impostare il controllo automatico del server sched_eemail=Indirizzo email mancante sched_esmtp=Server SMTP mancante o non valido diff --git a/cluster-shutdown/lang/ja.auto b/cluster-shutdown/lang/ja.auto index f267488d3..26c27d984 100644 --- a/cluster-shutdown/lang/ja.auto +++ b/cluster-shutdown/lang/ja.auto @@ -14,7 +14,6 @@ index_smtp=SMTPサーバー経由で送信 index_this=このサーバー index_nu=ユーザー設定なし index_nl=ログインに失敗しました - shut_title=サーバーのシャットダウン shut_rusure=選択した $1台のサーバーをすぐにシャットダウンしてもよろしいですか？ shut_ok=はい、やる @@ -23,12 +22,10 @@ shut_failed=..失敗しました！ $1 shut_done=..完了。 shut_sel=選択されたサーバーは次のとおりです。 shut_ecannot=サーバーをシャットダウンすることはできません - reboot_title=サーバーの再起動 reboot_rusure=選択した $1個のサーバーをすぐに再起動してもよろしいですか？ reboot_doing=$1を再起動します .. reboot_ecannot=サーバーを再起動することはできません - sched_err=自動サーバーチェックのセットアップに失敗しました sched_eemail=メールアドレスがありません sched_esmtp=SMTPサーバーが見つからないか無効です diff --git a/cluster-shutdown/lang/ko.auto b/cluster-shutdown/lang/ko.auto index 6fd59121a..e040fa660 100644 --- a/cluster-shutdown/lang/ko.auto +++ b/cluster-shutdown/lang/ko.auto @@ -14,7 +14,6 @@ index_smtp=SMTP 서버를 통해 전송 index_this=이 서버 index_nu=사용자 설정 없음 index_nl=로그인 실패 - shut_title=서버 종료 shut_rusure=선택한 $1 개의 서버를 즉시 종료 하시겠습니까? shut_ok=그래하자 @@ -23,12 +22,10 @@ shut_failed=.. 실패했습니다! $1 shut_done=.. 완료. shut_sel=선택된 서버는 다음과 같습니다. shut_ecannot=서버를 종료 할 수 없습니다 - reboot_title=서버 재부팅 reboot_rusure=선택한 $1 개의 서버를 즉시 재부팅 하시겠습니까? reboot_doing=$1 재부팅 중입니다. reboot_ecannot=서버를 재부팅 할 수 없습니다 - sched_err=자동 서버 확인을 설정하지 못했습니다 sched_eemail=이메일 주소가 없습니다 sched_esmtp=SMTP 서버가 없거나 유효하지 않습니다 diff --git a/cluster-shutdown/lang/lt.auto b/cluster-shutdown/lang/lt.auto index a85f890fd..ab230b34b 100644 --- a/cluster-shutdown/lang/lt.auto +++ b/cluster-shutdown/lang/lt.auto @@ -14,7 +14,6 @@ index_smtp=Siųsti per SMTP serverį index_this=Šis serveris index_nu=Nenustatytas joks vartotojas index_nl=Prisijungimas nepavyko - shut_title=Išjunkite serverius shut_rusure=Ar tikrai norite nedelsdami išjungti pasirinktus $1 serverius? shut_ok=Taip, daryk @@ -23,12 +22,10 @@ shut_failed=.. nepavyko! $1 shut_done=.. padaryta. shut_sel=Pasirinkti serveriai yra šie : shut_ecannot=Jums neleidžiama išjungti serverių - reboot_title=Iš naujo paleiskite serverius reboot_rusure=Ar tikrai norite nedelsdami paleisti iš naujo pasirinktus $1 serverius? reboot_doing=Perkraunama $1 .. reboot_ecannot=Jums neleidžiama perkrauti serverių - sched_err=Nepavyko nustatyti automatinio serverio tikrinimo sched_eemail=Trūksta el. Pašto adreso sched_esmtp=Trūksta arba netinkamas SMTP serveris diff --git a/cluster-shutdown/lang/lv.auto b/cluster-shutdown/lang/lv.auto index 6f33dd65c..c2920ef9f 100644 --- a/cluster-shutdown/lang/lv.auto +++ b/cluster-shutdown/lang/lv.auto @@ -14,7 +14,6 @@ index_smtp=Sūtīt caur SMTP serveri index_this=Šis serveris index_nu=Nav iestatīts neviens lietotājs index_nl=Pieslēgšanās neizdevās - shut_title=Izslēgt serverus shut_rusure=Vai tiešām vēlaties nekavējoties izslēgt atlasītos serverus $1 ? shut_ok=Jā, dari to @@ -23,12 +22,10 @@ shut_failed=.. neizdevās! $1 shut_done=.. darīts. shut_sel=Atlasītie serveri ir : shut_ecannot=Jums nav atļauts slēgt serverus - reboot_title=Atsāknēšanas serveri reboot_rusure=Vai tiešām vēlaties nekavējoties atsāknēt atlasītos serverus $1 ? reboot_doing=Atsāknēšana $1. reboot_ecannot=Jums nav atļauts pārstartēt serverus - sched_err=Neizdevās iestatīt automātisku servera pārbaudi sched_eemail=Trūkst e-pasta adreses sched_esmtp=Trūkst vai nav derīgs SMTP serveris diff --git a/cluster-shutdown/lang/ms.auto b/cluster-shutdown/lang/ms.auto index 6b780373c..ae72e9e5e 100644 --- a/cluster-shutdown/lang/ms.auto +++ b/cluster-shutdown/lang/ms.auto @@ -14,7 +14,6 @@ index_smtp=Hantar melalui pelayan SMTP index_this=Pelayan ini index_nu=Tiada set pengguna index_nl=Daftar masuk gagal - shut_title=Pelayan Shut Down shut_rusure=Adakah anda pasti mahu menutup pelayan $1 yang dipilih dengan serta-merta? shut_ok=Ya, lakukannya @@ -23,12 +22,10 @@ shut_failed=.. gagal! $1 shut_done=.. selesai. shut_sel=Pelayan yang dipilih adalah : shut_ecannot=Anda tidak dibenarkan menutup pelayan - reboot_title=Reboot Server reboot_rusure=Adakah anda pasti mahu terus reboot pelayan $1 yang dipilih? reboot_doing=Reboot $1 .. reboot_ecannot=Anda tidak dibenarkan reboot pelayan - sched_err=Gagal menyediakan pemeriksaan pelayan automatik sched_eemail=Alamat e-mel yang tiada sched_esmtp=Pelayan SMTP yang hilang atau tidak sah diff --git a/cluster-shutdown/lang/mt.auto b/cluster-shutdown/lang/mt.auto index 757715620..b8ff0343d 100644 --- a/cluster-shutdown/lang/mt.auto +++ b/cluster-shutdown/lang/mt.auto @@ -14,7 +14,6 @@ index_smtp=Ibgħat permezz ta 'server SMTP index_this=Dan is-server index_nu=L-ebda sett ta 'utenti index_nl=Id-dħul ma rnexxiex - shut_title=Għalaq is-Servers shut_rusure=Int żgur li trid tagħlaq immedjatament is-servers magħżula $1 ? shut_ok=Iva, Do It @@ -23,12 +22,10 @@ shut_failed=.. naqas! $1 shut_done=.. sar. shut_sel=Is-servers magħżula huma : shut_ecannot=M'għandekx permess tintefa 'servers - reboot_title=Reboot Servers reboot_rusure=Int żgur li trid terġa 'tibda mill-ġdid is-servers magħżula $1 ? reboot_doing=Rebooting $1 .. reboot_ecannot=M'għandekx permess tirristartja servers - sched_err=Naqset milli tissettja l-iċċekkjar awtomatiku tas-server sched_eemail=Indirizz tal-email nieqes sched_esmtp=Server SMTP nieqes jew invalidu diff --git a/cluster-shutdown/lang/nl.auto b/cluster-shutdown/lang/nl.auto index 48e02db65..48d348087 100644 --- a/cluster-shutdown/lang/nl.auto +++ b/cluster-shutdown/lang/nl.auto @@ -14,7 +14,6 @@ index_smtp=Verzenden via SMTP-server index_this=Deze server index_nu=Geen gebruiker ingesteld index_nl=Aanmelden mislukt - shut_title=Servers afsluiten shut_rusure=Weet u zeker dat u de $1 geselecteerde servers onmiddellijk wilt afsluiten? shut_ok=Ja doe het @@ -23,12 +22,10 @@ shut_failed=.. is mislukt! $1 shut_done=.. gedaan. shut_sel=De geselecteerde servers zijn : shut_ecannot=U mag servers niet afsluiten - reboot_title=Start servers opnieuw op reboot_rusure=Weet je zeker dat je de $1 geselecteerde servers onmiddellijk opnieuw wilt opstarten? reboot_doing=$1 opnieuw opstarten. .. reboot_ecannot=Het is niet toegestaan servers opnieuw op te starten - sched_err=Kan automatische servercontrole niet instellen sched_eemail=E-mailadres ontbreekt sched_esmtp=Ontbrekende of ongeldige SMTP-server diff --git a/cluster-shutdown/lang/no.auto b/cluster-shutdown/lang/no.auto index 7cd50258f..7a720f2fb 100644 --- a/cluster-shutdown/lang/no.auto +++ b/cluster-shutdown/lang/no.auto @@ -14,7 +14,6 @@ index_smtp=Send via SMTP-server index_this=Denne serveren index_nu=Ingen brukersett index_nl=Innlogging feilet - shut_title=Slå av servere shut_rusure=Er du sikker på at du umiddelbart vil slå av de $1 valgte serverne? shut_ok=Ja gjør det @@ -23,12 +22,10 @@ shut_failed=.. mislyktes! $1 shut_done=.. ferdig. shut_sel=De valgte serverne er : shut_ecannot=Du har ikke lov til å slå av servere - reboot_title=Start servere på nytt reboot_rusure=Er du sikker på at du vil starte på nytt de $1 valgte serverne umiddelbart? reboot_doing=Start på nytt $1 .. reboot_ecannot=Du har ikke lov til å starte servere på nytt - sched_err=Kunne ikke konfigurere automatisk serverkontroll sched_eemail=Manglende e-postadresse sched_esmtp=Manglende eller ugyldig SMTP-server diff --git a/cluster-shutdown/lang/pl.auto b/cluster-shutdown/lang/pl.auto index 0c9b1006a..44bfce7b2 100644 --- a/cluster-shutdown/lang/pl.auto +++ b/cluster-shutdown/lang/pl.auto @@ -14,7 +14,6 @@ index_smtp=Wyślij przez serwer SMTP index_this=Ten serwer index_nu=Nie ustawiono użytkownika index_nl=Logowanie nie powiodło się - shut_title=Zamknij serwery shut_rusure=Czy na pewno chcesz natychmiast zamknąć $1 wybranych serwerów? shut_ok=Tak zrób to @@ -23,12 +22,10 @@ shut_failed=.. nie powiodło się! $1 shut_done=.. gotowy. shut_sel=Wybrane serwery to : shut_ecannot=Nie możesz zamknąć serwerów - reboot_title=Uruchom ponownie serwery reboot_rusure=Czy na pewno chcesz natychmiast ponownie uruchomić $1 wybranych serwerów? reboot_doing=Ponowne uruchomienie $1 .. reboot_ecannot=Nie wolno ponownie uruchamiać serwerów - sched_err=Nie udało się skonfigurować automatycznego sprawdzania serwera sched_eemail=Brakujący adres e-mail sched_esmtp=Brakujący lub nieprawidłowy serwer SMTP diff --git a/cluster-shutdown/lang/pt.auto b/cluster-shutdown/lang/pt.auto index d23fc986f..5636563a4 100644 --- a/cluster-shutdown/lang/pt.auto +++ b/cluster-shutdown/lang/pt.auto @@ -14,7 +14,6 @@ index_smtp=Enviar via servidor SMTP index_this=Este servidor index_nu=Nenhum conjunto de usuários index_nl=Falha na autenticação - shut_title=Desligar servidores shut_rusure=Tem certeza de que deseja desligar imediatamente os $1 servidores selecionados? shut_ok=Sim, faça isso @@ -23,12 +22,10 @@ shut_failed=.. falhou! $1 shut_done=.. feito. shut_sel=Os servidores selecionados são : shut_ecannot=Você não tem permissão para desligar servidores - reboot_title=Reinicializar servidores reboot_rusure=Tem certeza de que deseja reiniciar imediatamente os $1 servidores selecionados? reboot_doing=Reiniciando $1 .. reboot_ecannot=Você não tem permissão para reiniciar servidores - sched_err=Falha ao configurar a verificação automática do servidor sched_eemail=Endereço de e-mail ausente sched_esmtp=Servidor SMTP inválido ou ausente diff --git a/cluster-shutdown/lang/pt_BR.auto b/cluster-shutdown/lang/pt_BR.auto index d23fc986f..5636563a4 100644 --- a/cluster-shutdown/lang/pt_BR.auto +++ b/cluster-shutdown/lang/pt_BR.auto @@ -14,7 +14,6 @@ index_smtp=Enviar via servidor SMTP index_this=Este servidor index_nu=Nenhum conjunto de usuários index_nl=Falha na autenticação - shut_title=Desligar servidores shut_rusure=Tem certeza de que deseja desligar imediatamente os $1 servidores selecionados? shut_ok=Sim, faça isso @@ -23,12 +22,10 @@ shut_failed=.. falhou! $1 shut_done=.. feito. shut_sel=Os servidores selecionados são : shut_ecannot=Você não tem permissão para desligar servidores - reboot_title=Reinicializar servidores reboot_rusure=Tem certeza de que deseja reiniciar imediatamente os $1 servidores selecionados? reboot_doing=Reiniciando $1 .. reboot_ecannot=Você não tem permissão para reiniciar servidores - sched_err=Falha ao configurar a verificação automática do servidor sched_eemail=Endereço de e-mail ausente sched_esmtp=Servidor SMTP inválido ou ausente diff --git a/cluster-shutdown/lang/ro.auto b/cluster-shutdown/lang/ro.auto index 84cd1d6c4..1a039c539 100644 --- a/cluster-shutdown/lang/ro.auto +++ b/cluster-shutdown/lang/ro.auto @@ -14,7 +14,6 @@ index_smtp=Trimiteți prin server SMTP index_this=Acest server index_nu=Nici un set de utilizatori index_nl=Autentificare esuata - shut_title=Opriți serverele shut_rusure=Sigur doriți să opriți imediat serverele selectate $1 ? shut_ok=Da, fă-o @@ -23,12 +22,10 @@ shut_failed=.. a eșuat! $1 shut_done=.. Terminat. shut_sel=Serverele selectate sunt : shut_ecannot=Nu aveți voie să opriți serverele - reboot_title=Reboot Servers reboot_rusure=Sigur doriți să reporniți imediat serverele selectate $1 ? reboot_doing=Repornirea $1. reboot_ecannot=Nu aveți voie să reporniți serverele - sched_err=Nu a reușit să configurați verificarea automată a serverului sched_eemail=Adresa de e-mail lipsă sched_esmtp=Serverul SMTP lipsă sau nevalid diff --git a/cluster-shutdown/lang/ru.auto b/cluster-shutdown/lang/ru.auto index 20477d49d..9e3cdfd4d 100644 --- a/cluster-shutdown/lang/ru.auto +++ b/cluster-shutdown/lang/ru.auto @@ -14,7 +14,6 @@ index_smtp=Отправить через SMTP сервер index_this=Этот сервер index_nu=Нет установленного пользователя index_nl=Ошибка входа - shut_title=Завершение работы серверов shut_rusure=Вы уверены, что хотите немедленно закрыть $1 выбранных серверов? shut_ok=Да, сделай это @@ -23,12 +22,10 @@ shut_failed=.. не удалось! $1 shut_done=.. сделано. shut_sel=Выбранные серверы : shut_ecannot=Вам не разрешено выключать серверы - reboot_title=Перезагрузка серверов reboot_rusure=Вы уверены, что хотите немедленно перезагрузить $1 выбранных серверов? reboot_doing=Перезагрузка $1 .. reboot_ecannot=Вы не можете перезагрузить серверы - sched_err=Не удалось настроить автоматическую проверку сервера sched_eemail=Отсутствующий адрес электронной почты sched_esmtp=Отсутствует или неверный SMTP-сервер diff --git a/cluster-shutdown/lang/sk.auto b/cluster-shutdown/lang/sk.auto index c9a61a0fe..771f38321 100644 --- a/cluster-shutdown/lang/sk.auto +++ b/cluster-shutdown/lang/sk.auto @@ -14,7 +14,6 @@ index_smtp=Odoslať prostredníctvom servera SMTP index_this=Tento server index_nu=Nie je nastavený žiadny používateľ index_nl=Prihlásenie zlyhalo - shut_title=Vypnite servery shut_rusure=Naozaj chcete okamžite vypnúť vybrané servery $1 ? shut_ok=Áno, urob to @@ -23,12 +22,10 @@ shut_failed=.. zlyhalo! $1 shut_done=.. hotový. shut_sel=Vybrané servery sú : shut_ecannot=Nie je povolené vypnúť servery - reboot_title=Reštartujte servery reboot_rusure=Naozaj chcete okamžite reštartovať vybrané servery $1 ? reboot_doing=Reštartuje sa $1 .. reboot_ecannot=Nemáte povolenie na reštartovanie serverov - sched_err=Nepodarilo sa nastaviť automatickú kontrolu servera sched_eemail=Chýba e-mailová adresa sched_esmtp=Chýba alebo je neplatný server SMTP diff --git a/cluster-shutdown/lang/sl.auto b/cluster-shutdown/lang/sl.auto index 5f62f6ad8..eff5292f6 100644 --- a/cluster-shutdown/lang/sl.auto +++ b/cluster-shutdown/lang/sl.auto @@ -14,7 +14,6 @@ index_smtp=Pošlji preko SMTP strežnika index_this=Ta strežnik index_nu=Uporabnik ni nastavljen index_nl=Prijava ni uspela - shut_title=Izklopite strežnike shut_rusure=Ali ste prepričani, da želite takoj izklopiti $1 izbrane strežnike? shut_ok=Da, naredi @@ -23,12 +22,10 @@ shut_failed=.. ni uspelo! $1 shut_done=.. Končano. shut_sel=Izbrani strežniki so : shut_ecannot=Ni vam dovoljeno izklopiti strežnikov - reboot_title=Znova zaženite strežnike reboot_rusure=Ali ste prepričani, da želite takoj znova zagnati $1 izbrane strežnike? reboot_doing=Ponovno zagon $1. reboot_ecannot=Ne smete znova zagnati strežnikov - sched_err=Samodejno preverjanje strežnika ni uspelo sched_eemail=Manjka e-poštni naslov sched_esmtp=Manjkajoči ali neveljavni strežnik SMTP diff --git a/cluster-shutdown/lang/sv.auto b/cluster-shutdown/lang/sv.auto index 439e0c8a4..628d65b19 100644 --- a/cluster-shutdown/lang/sv.auto +++ b/cluster-shutdown/lang/sv.auto @@ -14,7 +14,6 @@ index_smtp=Skicka via SMTP-server index_this=Denna server index_nu=Ingen användaruppsättning index_nl=Inloggningen misslyckades - shut_title=Stäng av servrar shut_rusure=Är du säker på att du omedelbart vill stänga av de valda $1 -servrarna? shut_ok=Ja gör det @@ -23,12 +22,10 @@ shut_failed=.. misslyckades! $1 shut_done=.. Gjort. shut_sel=De valda servrarna är : shut_ecannot=Du får inte stänga av servrar - reboot_title=Starta om servrar reboot_rusure=Är du säker på att du omedelbart vill starta om de valda $1 -servrarna? reboot_doing=Starta om $1 .. reboot_ecannot=Du får inte starta om servrar - sched_err=Det gick inte att konfigurera automatisk serverkontroll sched_eemail=E-postadress saknas sched_esmtp=Saknad eller ogiltig SMTP-server diff --git a/cluster-shutdown/lang/th.auto b/cluster-shutdown/lang/th.auto index 1ec9ab9ee..a530bdb47 100644 --- a/cluster-shutdown/lang/th.auto +++ b/cluster-shutdown/lang/th.auto @@ -14,7 +14,6 @@ index_smtp=ส่งผ่านเซิร์ฟเวอร์ SMTP index_this=เซิร์ฟเวอร์นี้ index_nu=ไม่ได้ตั้งค่าผู้ใช้ index_nl=การเข้าสู่ระบบล้มเหลว - shut_title=เซิร์ฟเวอร์ปิด shut_rusure=คุณแน่ใจหรือไม่ว่าต้องการปิดเซิร์ฟเวอร์ $1 ที่เลือกทันที shut_ok=ใช่ทำแล้ว @@ -23,12 +22,10 @@ shut_failed=.. ล้มเหลว! $1 shut_done=.. เสร็จแล้ว shut_sel=เซิร์ฟเวอร์ที่เลือกคือ : shut_ecannot=คุณไม่ได้รับอนุญาตให้ปิดเซิร์ฟเวอร์ - reboot_title=รีบูตเซิร์ฟเวอร์ reboot_rusure=คุณแน่ใจหรือไม่ว่าต้องการรีบูตเซิร์ฟเวอร์ที่เลือก $1 ทันที reboot_doing=กำลังรีบูต $1 reboot_ecannot=คุณไม่ได้รับอนุญาตให้รีบูตเซิร์ฟเวอร์ - sched_err=ไม่สามารถตั้งค่าการตรวจสอบเซิร์ฟเวอร์อัตโนมัติ sched_eemail=ไม่มีที่อยู่อีเมล sched_esmtp=เซิร์ฟเวอร์ SMTP ขาดหายไปหรือไม่ถูกต้อง diff --git a/cluster-shutdown/lang/tr.auto b/cluster-shutdown/lang/tr.auto index 219c7e7be..e6ea32f92 100644 --- a/cluster-shutdown/lang/tr.auto +++ b/cluster-shutdown/lang/tr.auto @@ -14,7 +14,6 @@ index_smtp=SMTP sunucusu üzerinden gönder index_this=Bu sunucu index_nu=Kullanıcı ayarlanmadı index_nl=Giriş başarısız - shut_title=Bilgisayarları Kapat shut_rusure=Seçili $1 sunucusunu hemen kapatmak istediğinizden emin misiniz? shut_ok=Evet yap @@ -23,12 +22,10 @@ shut_failed=.. başarısız oldu! $1 shut_done=.. bitti. shut_sel=Seçilen sunucular : shut_ecannot=Sunucuları kapatma izniniz yok - reboot_title=Sunucuları Yeniden Başlat reboot_rusure=Seçilen $1 sunucuyu hemen yeniden başlatmak istediğinizden emin misiniz? reboot_doing=$1 yeniden başlatılıyor .. reboot_ecannot=Sunucuları yeniden başlatmanıza izin verilmiyor - sched_err=Otomatik sunucu denetimi ayarlanamadı sched_eemail=Eksik e-posta adresi sched_esmtp=Eksik veya geçersiz SMTP sunucusu diff --git a/cluster-shutdown/lang/uk.auto b/cluster-shutdown/lang/uk.auto index 98b14ea37..01a01e505 100644 --- a/cluster-shutdown/lang/uk.auto +++ b/cluster-shutdown/lang/uk.auto @@ -14,7 +14,6 @@ index_smtp=Відправити через SMTP-сервер index_this=Цей сервер index_nu=Користувача не встановлено index_nl=Помилка логіну - shut_title=Вимкніть сервери shut_rusure=Ви впевнені, що хочете негайно вимкнути обрані $1 сервери? shut_ok=Так, зробіть це @@ -23,12 +22,10 @@ shut_failed=.. не вдалося! $1 shut_done=.. зроблено. shut_sel=Вибрані сервери : shut_ecannot=Вам заборонено закривати сервери - reboot_title=Перезавантажте сервери reboot_rusure=Ви впевнені, що хочете негайно перезавантажити $1 обрані сервери? reboot_doing=Перезавантаження $1. reboot_ecannot=Вам заборонено перезавантажувати сервери - sched_err=Не вдалося налаштувати автоматичну перевірку сервера sched_eemail=Відсутня електронна адреса sched_esmtp=Відсутній або недійсний SMTP-сервер diff --git a/cluster-shutdown/lang/ur.auto b/cluster-shutdown/lang/ur.auto index bdf779286..a2c8da360 100644 --- a/cluster-shutdown/lang/ur.auto +++ b/cluster-shutdown/lang/ur.auto @@ -14,7 +14,6 @@ index_smtp=SMTP سرور کے ذریعے بھیجیں index_this=یہ سرور index_nu=کوئی صارف سیٹ نہیں ہے index_nl=لاگ ان ناکام رہے - shut_title=سرور بند کرو shut_rusure=کیا آپ واقعی$1 منتخب کردہ سرورز کو فوری طور پر بند کرنا چاہتے ہیں؟ shut_ok=ہاں ، کرو @@ -23,12 +22,10 @@ shut_failed=.. ناکام! $1 shut_done=.. ہو گیا shut_sel=منتخب سرورز یہ ہیں : shut_ecannot=آپ کو سرور بند کرنے کی اجازت نہیں ہے - reboot_title=سرور بوٹ کریں reboot_rusure=کیا آپ واقعی$1 منتخب کردہ سرورز کو فوری طور پر ریبوٹ کرنا چاہتے ہیں؟ reboot_doing=دوبارہ بوٹ کریں $1 .. reboot_ecannot=آپ کو سرور دوبارہ چلانے کی اجازت نہیں ہے - sched_err=خودکار سرور چیکنگ سیٹ اپ کرنے میں ناکام sched_eemail=گمشدہ ای میل پتہ sched_esmtp=گمشدہ یا غلط SMTP سرور diff --git a/cluster-shutdown/lang/vi.auto b/cluster-shutdown/lang/vi.auto index 922b7eab8..4160d9f8b 100644 --- a/cluster-shutdown/lang/vi.auto +++ b/cluster-shutdown/lang/vi.auto @@ -14,7 +14,6 @@ index_smtp=Gửi qua máy chủ SMTP index_this=Máy chủ này index_nu=Không có người dùng index_nl=Đăng nhập thất bại - shut_title=Tắt máy chủ shut_rusure=Bạn có chắc chắn muốn tắt ngay các máy chủ được chọn $1 không? shut_ok=Ừ làm đi @@ -23,12 +22,10 @@ shut_failed=.. thất bại! $1 shut_done=.. làm xong. shut_sel=Các máy chủ được chọn là : shut_ecannot=Bạn không được phép tắt máy chủ - reboot_title=Khởi động lại máy chủ reboot_rusure=Bạn có chắc chắn muốn khởi động lại ngay lập tức các máy chủ được chọn $1 không? reboot_doing=Khởi động lại $1 .. reboot_ecannot=Bạn không được phép khởi động lại máy chủ - sched_err=Không thể thiết lập kiểm tra máy chủ tự động sched_eemail=Thiếu địa chỉ email sched_esmtp=Máy chủ SMTP bị thiếu hoặc không hợp lệ diff --git a/cluster-shutdown/lang/zh.auto b/cluster-shutdown/lang/zh.auto index ef911dee3..1b831f112 100644 --- a/cluster-shutdown/lang/zh.auto +++ b/cluster-shutdown/lang/zh.auto @@ -14,7 +14,6 @@ index_smtp=通过SMTP服务器发送 index_this=该服务器 index_nu=没有用户设置 index_nl=登录失败 - shut_title=关闭服务器 shut_rusure=您确定要立即关闭 $1所选服务器吗？ shut_ok=是的，请动手 @@ -23,12 +22,10 @@ shut_failed=..失败了！ $1 shut_done=..完成。 shut_sel=选择的服务器是： shut_ecannot=您不可以关闭服务器 - reboot_title=重新启动服务器 reboot_rusure=您确定要立即重新启动 $1所选服务器吗？ reboot_doing=正在重新启动 $1 .. reboot_ecannot=您不允许重新启动服务器 - sched_err=无法设置自动服务器检查 sched_eemail=电子邮件地址遗失 sched_esmtp=缺少或无效的SMTP服务器 diff --git a/cluster-shutdown/lang/zh_TW.auto b/cluster-shutdown/lang/zh_TW.auto index e2bcd749b..f7c8b0e5b 100644 --- a/cluster-shutdown/lang/zh_TW.auto +++ b/cluster-shutdown/lang/zh_TW.auto @@ -14,7 +14,6 @@ index_smtp=通過SMTP服務器發送 index_this=該服務器 index_nu=沒有用戶設置 index_nl=登錄失敗 - shut_title=關閉服務器 shut_rusure=您確定要立即關閉 $1所選服務器嗎？ shut_ok=是的，請動手 @@ -23,12 +22,10 @@ shut_failed=..失敗了！ $1 shut_done=..完成。 shut_sel=選擇的服務器是： shut_ecannot=您不可以關閉服務器 - reboot_title=重新啟動服務器 reboot_rusure=您確定要立即重新啟動 $1所選服務器嗎？ reboot_doing=正在重新啟動 $1 .. reboot_ecannot=您不允許重新啟動服務器 - sched_err=無法設置自動服務器檢查 sched_eemail=電子郵件地址遺失 sched_esmtp=缺少或無效的SMTP服務器 diff --git a/cluster-software/lang/de b/cluster-software/lang/de index 1175fb5c2..ff7737c05 100644 --- a/cluster-software/lang/de +++ b/cluster-software/lang/de @@ -174,4 +174,4 @@ deletes_success1=Erfolgreich deinstalliert: $1 deletes_failed2=Deinstallation fehlgeschlagen : $1 deletes_success2=.. Deinstallation abgeschlossen. deletes_rusure=Sind Sie sicher, dass Sie die Pakete $1 von den ausgewählten Hosts deinstallieren möchten? -deletes_ok=Alle löschen +deletes_ok=Alle löschen \ No newline at end of file diff --git a/cluster-useradmin/lang/de b/cluster-useradmin/lang/de index 684570595..d16df32ed 100644 --- a/cluster-useradmin/lang/de +++ b/cluster-useradmin/lang/de @@ -162,4 +162,4 @@ log_modify_group=Gruppe $1 geändert log_add_host=Benutzer und Gruppen von Host $1 hinzugefügt log_add_group=Benutzer und Gruppen von Hosts in Gruppe $1 hinzugefügt log_refresh=Benutzer und Gruppen aktualisiert -log_sync=Benutzer und Gruppen synchronisiert +log_sync=Benutzer und Gruppen synchronisiert \ No newline at end of file diff --git a/cluster-usermin/lang/de b/cluster-usermin/lang/de index bd6a8c751..23a4a1694 100644 --- a/cluster-usermin/lang/de +++ b/cluster-usermin/lang/de @@ -318,4 +318,4 @@ update_header5=Module auf $2 aktualisieren .. update_header4=Module auf Mitgliedern von $2 aktualisieren .. update_onhost=Ergebnisse der Aktualisierung auf $1 .. update_failed=.. Aktualisierung fehlgeschlagen: $1 -update_none=.. keine Updates gefunden. +update_none=.. keine Updates gefunden. \ No newline at end of file diff --git a/cluster-webmin/lang/de b/cluster-webmin/lang/de index 7024dcd45..0861379ca 100644 --- a/cluster-webmin/lang/de +++ b/cluster-webmin/lang/de @@ -329,4 +329,4 @@ config_all=Auf allen Servern config_have=Auf Servern, die es haben config_group=Auf Mitgliedern der Gruppe $1 config_on=Auf $1 -config_err=Fehler beim Speichern der Modulkonfiguration +config_err=Fehler beim Speichern der Modulkonfiguration \ No newline at end of file diff --git a/cpan/lang/de b/cpan/lang/de index 2d64280c6..b29725a6c 100644 --- a/cpan/lang/de +++ b/cpan/lang/de @@ -124,4 +124,4 @@ uninstalls_title=Module deinstallieren uninstalls_err=Deinstallation der Module fehlgeschlagen uninstalls_enone=Keine ausgewählt uninstalls_emod=$1 fehlgeschlagen: $2 -uninstalls_rusure=Sind Sie sicher, dass Sie die $1 ausgewählten Module deinstallieren möchten? $2 Unter-Module und $3 Dateien werden entfernt. +uninstalls_rusure=Sind Sie sicher, dass Sie die $1 ausgewählten Module deinstallieren möchten? $2 Unter-Module und $3 Dateien werden entfernt. \ No newline at end of file diff --git a/cpan/lang/uk b/cpan/lang/uk index e7b867afa..a36c0e64b 100644 --- a/cpan/lang/uk +++ b/cpan/lang/uk @@ -5,29 +5,36 @@ index_version=Версія index_desc=Опис index_date=Дата установки index_installmsg=Виберіть модуль Perl для зборки й установки на вашій системі. +index_allmods2=Відсутні модулі, які використовуються Webmin index_cpan=З CPAN за назвою index_refresh=Обновити список модулів CPAN -index_forcecpan=Завжди встановлюйте останню версію з сирцевих кодів index_local=З локального файлу index_uploaded=Із завантаженого файлу +index_delete=Видалення модулів +index_ezone=Схоже, що Perl використовується спільно з глобальною зоною, тому тут неможливо встановити модулі. Натомість вони повинні бути встановлені в глобальній зоні. +index_forcecpan=Завжди встановлюйте останню версію з сирцевих кодів +index_user=$1 (використовується $2) +index_wantmods=Модулі для встановлення +index_tabsuggest=Пропоновані модулі index_ftp=По URL ftp чи http index_installok=Установити index_return=списку модулів -index_pversion=Perl версії $1 -index_delete=Видалення модулів -index_recs=Наступні модулі Perl рекомендуються для встановлення Webmin: -index_user=$1 (використовується $2) -index_recsok=Встановити вибрані модулі -index_recsgot=Встановлено всі наступні модулі Perl, рекомендовані Webmin: $1 -index_ezone=Схоже, що Perl використовується спільно з глобальною зоною, тому тут неможливо встановити модулі. Натомість вони повинні бути встановлені в глобальній зоні. index_none=У вашій системі не знайдено встановлених модулів Perl. -index_tabmods=Існуючі модулі +index_pversion=Perl версії $1 +index_recs=Наступні модулі Perl рекомендуються для встановлення Webmin: +index_recsgot=Встановлено всі наступні модулі Perl, рекомендовані Webmin: $1 +index_recsok=Встановити вибрані модулі index_tabinstall=Встановити модуль -index_tabsuggest=Пропоновані модулі -index_allmods2=Відсутні модулі, які використовуються Webmin -index_wantmods=Модулі для встановлення +index_tabmods=Існуючі модулі +delete_efile=Недійсний файл пакета! + +download_act=Дії по установці +download_args=Аргументи Makefile.PL +download_cont=Продовжити установку +download_ebuild=Для створення одного або кількох модулів Perl потрібно $1, але цей модуль Perl не встановлено. download_err=Не удалося установити модуль +download_ecpangz=URL-адреса $1 не є списком модулів CPAN. Перевірте конфігурацію модуля. download_elocal=Не зазначений локальний файл download_elocal2='$1' не існує download_eupload=Ваш браузер не підтримує завантаження файлів @@ -35,32 +42,30 @@ download_eurl=Незрозумілий URL '$1' download_edir=Невірний каталог $1 download_etar=Не удалося розпакувати файл tar : $1 download_emod=Невірний модуль Perl +download_fallback=Деякі модулі не вдалося встановити з пакетів, натомість намагаються встановити з сирцевих кодів.. download_title=Установка модуля download_header=Настроювання установки модуля Perl download_mod=Назва модуля -download_mods=Назви модулів download_ver=Версія download_act=Дії по установці +download_args=Аргументи Makefile.PL +download_cont=Продовжити установку +download_yum=Встановлення модуля Perl $1 з пакета $2 download_src=Джерело download_m=Тільки зібрати download_mt=Зібрати і перевірити download_mi=Зібрати й установити +download_missing=Відсутні модулі $1 +download_missingok=У CPAN відсутні модулі +download_mods=Назви модулів download_mti=Зібрати, перевірити й установити -download_cont=Продовжити установку download_epackages=Невірний URL модулів CPAN download_ecpan=Модуль $1 у списку модулів CPAN не виявлений download_eisperl=Модуль $1 є частиною стандартного дистрибутива Perl -download_ecpangz=URL-адреса $1 не є списком модулів CPAN. Перевірте конфігурацію модуля. -download_args=Аргументи Makefile.PL download_envs=Перемінні оточення Makefile.PL download_name=Ім'я download_value=Значення download_emodname=Не зазначений модуль для установки -download_missing=Відсутні модулі $1 -download_ebuild=Для створення одного або кількох модулів Perl потрібно $1, але цей модуль Perl не встановлено. -download_yum=Встановлення модуля Perl $1 з пакета $2 -download_missingok=У CPAN відсутні модулі -download_fallback=Деякі модулі не вдалося встановити з пакетів, натомість намагаються встановити з сирцевих кодів.. install_title=Установка модуля install_untar=Розпакування файлу модуля @@ -68,6 +73,7 @@ install_make=Зборка модуля install_test=Перевірка модуля install_install=Установка модуля install_loop=У висновку виявлене можливе зациклення! +install_needunlink=Ви можете спробувати встановити знову, повернувшись на попередню сторінку та вибравши інші параметри. В іншому випадку клацніть тут, щоб видалити тимчасові файли пакунків, щоб заощадити місце на диску. install_done_0=Зборка $1 успішно довершена. install_done_1=Зборка і перевірка $1 успішно довершена. install_done_2=Зборка й установка $1 успішно довершена. @@ -76,7 +82,6 @@ install_err=При установці $1 відбулася помилка. Ви install_err2=Крім того, можна установити модель з CPAN командою $1 install_exec=Виконання $1 .. install_efile=Файл модуля $1 більш не існує -install_needunlink=Ви можете спробувати встановити знову, повернувшись на попередню сторінку та вибравши інші параметри. В іншому випадку клацніть тут, щоб видалити тимчасові файли пакунків, щоб заощадити місце на диску. cpan_sel=Модулі в $1 .. cpan_title=Вибір модуля Perl @@ -84,35 +89,33 @@ cpan_search=Знайти модулі з назвою cpan_match=Модулі, що збігаються з $1 .. cpan_none=Збігів не виявлено. +uninstall_debian=Модуль буде видалено шляхом видалення пакета $1 Debian. + edit_title=Інформація про модуль edit_header=Інформація про модуль edit_mod=Назва модуля +edit_debian=Пакет Debian $1 edit_desc=Опис edit_date=Дата установки edit_subs=Підмодулі edit_header2=Документація модуля edit_file=Файл модуля +edit_manual=Ручне встановлення модуля Perl +edit_method=Встановлено з edit_none=Немає edit_return=інформації про модуль +edit_rpm=Пакет RPM $1 edit_uninstall=Видалити модель і підмодулі edit_upgrade=Модуль оновлення від CPAN -edit_method=Встановлено з -edit_rpm=Пакет RPM $1 -edit_debian=Пакет Debian $1 -edit_manual=Ручне встановлення модуля Perl uninstall_title=Видалення модуля +uninstall_err=Не вдалося видалити модуль +uninstall_rpm=Модуль буде видалено шляхом видалення пакета $1 RPM. uninstall_rusure=Видалити модуль Perl $1 ? Будуть вилучені наступні файли : uninstall_rusure2=Видалити модуль Perl $1 і підмодулі $2 ?
Будуть вилучені наступні файли : uninstall_ok=Видалити -uninstall_rpm=Модуль буде видалено шляхом видалення пакета $1 RPM. -uninstall_debian=Модуль буде видалено шляхом видалення пакета $1 Debian. -uninstall_err=Не вдалося видалити модуль - -delete_efile=Недійсний файл пакета! - -uninstalls_title=Видалення модулів -uninstalls_err=Не вдалося видалити модулі -uninstalls_enone=Не вибрано uninstalls_emod=$1 не вдалося: $2 +uninstalls_enone=Не вибрано +uninstalls_err=Не вдалося видалити модулі uninstalls_rusure=Ви впевнені, що бажаєте видалити вибрані модулі $1? $2 підмодулі та $3 файли буде видалено. +uninstalls_title=Видалення модулів diff --git a/cpan/lang/uk.auto b/cpan/lang/uk.auto index 9b3fcbeda..126b24213 100644 --- a/cpan/lang/uk.auto +++ b/cpan/lang/uk.auto @@ -1,11 +1,50 @@ index_ver=Версія +index_forcecpan=Завжди встановлюйте останню версію з джерела +index_delete=Видалення модулів index_upgrade=Оновлення модулів +index_recs=Наступні модулі Perl рекомендуються для установки Webmin : +index_user=$1 (використовується $2) +index_recsok=Встановіть вибрані модулі +index_recsgot=Встановлені всі наступні модулі Perl, рекомендовані Webmin : $1 +index_ezone=Здається, Perl ділиться з глобальною зоною, тому модулі тут не можуть бути встановлені. Їх потрібно встановити замість глобальної зони. +index_none=У вашій системі не знайдено встановлених модулів Perl. +index_tabmods=Існуючі модулі +index_tabinstall=Встановити модуль +index_tabsuggest=Запропоновані модулі +index_allmods2=Відсутні модулі, які використовує Webmin +index_wantmods=Модулі для встановлення +download_mods=Назви модулів download_pres=Попередні реквізити +download_ecpangz=URL $1 - це не список модулів CPAN. Перевірте конфігурацію модуля. download_need=Отримання відсутніх попередніх умов +download_missing=Відсутні $1 модулі download_nomissing=Усі встановлені +download_ebuild=Для побудови одного або декількох модулів Perl потрібен $1, але цей модуль Perl не встановлений. +download_yum=Встановлення модуля Perl $1 з пакета $2. +download_missingok=Модулі відсутні у CPAN +download_fallback=Деякі модулі не вдалося встановити з пакетів, намагаючись встановити з джерела замість цього .. install_doing_0=Створення $1. install_doing_1=Виготовлення та тестування $1. install_doing_2=Створення та встановлення $1. install_doing_3=Створення, тестування та встановлення $1. +install_needunlink=Ви можете спробувати встановити знову, повернувшись до попередньої сторінки та вибравши різні параметри. В іншому випадку натисніть тут, щоб видалити тимчасові файли пакета, щоб заощадити місце на диску. + +edit_upgrade=Модуль оновлення від CPAN +edit_method=Встановлено з +edit_rpm=RPM пакет $1 +edit_debian=Пакет Debian $1 +edit_manual=Ручна установка модуля Perl + +uninstall_rpm=Модуль буде видалено, видаливши пакет $1 RPM. +uninstall_debian=Модуль буде видалений шляхом встановлення пакета Debian $1. +uninstall_err=Не вдалося видалити модуль + +delete_efile=Недійсний файл пакету! + +uninstalls_title=Видалення модулів +uninstalls_err=Не вдалося видалити модулі +uninstalls_enone=Не вибрано жодного +uninstalls_emod=$1 не вдалося : $2 +uninstalls_rusure=Ви впевнені, що хочете видалити вибрані модулі $1 ? $2 підмодулі та $3 файли будуть видалені. diff --git a/cpan/lang/zh b/cpan/lang/zh index f7e10a9e2..42ff42d26 100644 --- a/cpan/lang/zh +++ b/cpan/lang/zh @@ -125,3 +125,4 @@ uninstalls_err=卸载模块失败 uninstalls_enone=未选择 uninstalls_emod=$1 失败 : $2 uninstalls_rusure=确定要卸载所选的 $1 吗?此操作会将 $2 子模块以及 $3 文件同时删除. +__norefs=1 diff --git a/dfsadmin/lang/de b/dfsadmin/lang/de index b454bc01e..49cc1eacb 100644 --- a/dfsadmin/lang/de +++ b/dfsadmin/lang/de @@ -54,4 +54,4 @@ ecannot=Sie sind nicht berechtigt, NFS-Freigaben zu verwalten delete_err=Fehlerhaftes Löschen von Freigaben delete_enone=Keine ausgewählt -restart_err=Änderungen konnten nicht angewendet werden +restart_err=Änderungen konnten nicht angewendet werden \ No newline at end of file diff --git a/dhcp-dns/lang/af.auto b/dhcp-dns/lang/af.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/af.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/ar.auto b/dhcp-dns/lang/ar.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/ar.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/be.auto b/dhcp-dns/lang/be.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/be.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/bg.auto b/dhcp-dns/lang/bg.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/bg.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/ca.auto b/dhcp-dns/lang/ca.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/ca.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/cs.auto b/dhcp-dns/lang/cs.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/cs.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/da.auto b/dhcp-dns/lang/da.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/da.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/de b/dhcp-dns/lang/de index 144ff3c50..1a7a7a582 100644 --- a/dhcp-dns/lang/de +++ b/dhcp-dns/lang/de @@ -44,4 +44,4 @@ delete_err=Fehler beim Löschen der Hosts delete_enone=Keine ausgewählt chooser_ip=Freie IP-Adresse auswählen -chooser_none=Es wurden keine freien IP-Adressen in einem Ihrer Subnetze gefunden! +chooser_none=Es wurden keine freien IP-Adressen in einem Ihrer Subnetze gefunden! \ No newline at end of file diff --git a/dhcp-dns/lang/el.auto b/dhcp-dns/lang/el.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/el.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/es.auto b/dhcp-dns/lang/es.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/es.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/eu.auto b/dhcp-dns/lang/eu.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/eu.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/fa.auto b/dhcp-dns/lang/fa.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/fa.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/fi.auto b/dhcp-dns/lang/fi.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/fi.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/fr.auto b/dhcp-dns/lang/fr.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/fr.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/he.auto b/dhcp-dns/lang/he.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/he.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/hr.auto b/dhcp-dns/lang/hr.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/hr.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/hu.auto b/dhcp-dns/lang/hu.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/hu.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/it.auto b/dhcp-dns/lang/it.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/it.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/ja.auto b/dhcp-dns/lang/ja.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/ja.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/ko.auto b/dhcp-dns/lang/ko.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/ko.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/lt.auto b/dhcp-dns/lang/lt.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/lt.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/lv.auto b/dhcp-dns/lang/lv.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/lv.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/ms.auto b/dhcp-dns/lang/ms.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/ms.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/mt.auto b/dhcp-dns/lang/mt.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/mt.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/nl.auto b/dhcp-dns/lang/nl.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/nl.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/no.auto b/dhcp-dns/lang/no.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/no.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/pl.auto b/dhcp-dns/lang/pl.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/pl.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/pt.auto b/dhcp-dns/lang/pt.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/pt.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/pt_BR.auto b/dhcp-dns/lang/pt_BR.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/pt_BR.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/ro.auto b/dhcp-dns/lang/ro.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/ro.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/ru.auto b/dhcp-dns/lang/ru.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/ru.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/sk.auto b/dhcp-dns/lang/sk.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/sk.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/sl.auto b/dhcp-dns/lang/sl.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/sl.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/sv.auto b/dhcp-dns/lang/sv.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/sv.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/th.auto b/dhcp-dns/lang/th.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/th.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/tr.auto b/dhcp-dns/lang/tr.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/tr.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/uk.auto b/dhcp-dns/lang/uk.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/uk.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/ur.auto b/dhcp-dns/lang/ur.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/ur.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/vi.auto b/dhcp-dns/lang/vi.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/vi.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/zh.auto b/dhcp-dns/lang/zh.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/zh.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcp-dns/lang/zh_TW.auto b/dhcp-dns/lang/zh_TW.auto deleted file mode 100644 index 1b2c40b70..000000000 --- a/dhcp-dns/lang/zh_TW.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_ebind8=The DNS server is not installed on this system, or is not running. Use Webmin's BIND DNS Server module to configure it. -index_edhcpd=The DHCP server is not installed on this system, or is not running. Use Webmin's DHCP Server module to configure it. -index_edomain=No DNS domain to add hosts to has been set on the module configuration page. -index_edomain2=The DNS domain set on the module configuration page was not found in the local BIND DNS server. -index_esubnets=No DHCP subnets to add hosts to has been set on the module configuration page. -index_cheader=Add new host -index_host=Hostname -index_subnet=Parent -index_ip=IP address -index_mac=MAC address -index_desc=Description -index_delete=Delete Selected Hosts -index_none=Host hosts in the configured subnets have been added yet. -index_none2=No hosts matched your search. -index_return=list of hosts -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current configuration by restarting the DHCP and DNS servers. -index_search=Find hosts matching: -index_ok=Search - -form_header=DHCP / DNS host details -form_comment=Host description -form_host=Hostname -form_ip=Fixed IP address -form_subnet=DHCP subnet -form_nosubnet=<None> -form_mac=MAC address -form_ethernet=Ethernet -form_tr=Token ring -form_fddi=FDDI - -edit_title=Edit Host -edit_egone=Selected host no longer exists! - -save_err=Failed to save host -save_ehost=Missing or invalid hostname -save_eclash=A host with the same name already exists -save_eclaship=A host with the same IP address already exists ($1) -save_eclashmac=A host with the same MAC address already exists ($1) -save_eip=Missing or invalid IPv4 address -save_emac=Missing or invalid MAC address - -delete_err=Failed to delete hosts -delete_enone=None selected - -chooser_ip=Select free IP address -chooser_none=No free IP addresses were found in any of your subnets! diff --git a/dhcpd/lang/af.auto b/dhcpd/lang/af.auto index bc4a8cc73..eec1127e2 100644 --- a/dhcpd/lang/af.auto +++ b/dhcpd/lang/af.auto @@ -14,7 +14,6 @@ index_memb=$1 lede index_hst=Gasheer en gasheer groepe index_nohst=Geen gashere of groepe is gedefinieër nie. index_hostgroup=Gasheer/Group -index_comment=Description index_parent=ouer index_hardware=Hardeware-adres index_group=groep: diff --git a/dhcpd/lang/ar.auto b/dhcpd/lang/ar.auto index 25910e6c1..0e47657e5 100644 --- a/dhcpd/lang/ar.auto +++ b/dhcpd/lang/ar.auto @@ -14,7 +14,6 @@ index_memb=$1 من الأعضاء index_hst=المضيفين والمجموعات المضيفة index_nohst=لم يتم تحديد مضيفين أو مجموعات. index_hostgroup=المضيف/المجموعة -index_comment=Description index_parent=الأبوين index_hardware=عنوان الجهاز index_group=مجموعة: diff --git a/dhcpd/lang/be.auto b/dhcpd/lang/be.auto index 405ef0765..8c157ee8d 100644 --- a/dhcpd/lang/be.auto +++ b/dhcpd/lang/be.auto @@ -14,7 +14,6 @@ index_memb=$1 удзельнікаў index_hst=Гаспадары і групы гаспадароў index_nohst=Ні хасты, ні групы не былі вызначаны. index_hostgroup=Гаспадар/група -index_comment=Description index_parent=Бацькоўскі index_hardware=Адрас абсталявання index_group=Група: diff --git a/dhcpd/lang/bg.auto b/dhcpd/lang/bg.auto index d87a8f4f9..a7126680c 100644 --- a/dhcpd/lang/bg.auto +++ b/dhcpd/lang/bg.auto @@ -14,7 +14,6 @@ index_memb=$1 членове index_hst=Домакини и групи домакини index_nohst=Не са дефинирани хостове или групи. index_hostgroup=Водещ/Група -index_comment=Description index_parent=родител index_hardware=Адрес на хардуер index_group=Група: diff --git a/dhcpd/lang/ca.auto b/dhcpd/lang/ca.auto index 22a3e1ead..1c313014a 100644 --- a/dhcpd/lang/ca.auto +++ b/dhcpd/lang/ca.auto @@ -1,3 +1,2 @@ -index_comment=Description index_hstlook2=Edita l'amfitrió anomenat: index_grplook2=Edita el grup anomenat: diff --git a/dhcpd/lang/cs.auto b/dhcpd/lang/cs.auto index 4ecf27014..8215abddd 100644 --- a/dhcpd/lang/cs.auto +++ b/dhcpd/lang/cs.auto @@ -1,5 +1,3 @@ -index_comment=Description - listl_mode=Zobrazovací mód : listl_mode_0=Pronájem DHCP listl_mode_1=Podsítě a použití diff --git a/dhcpd/lang/da.auto b/dhcpd/lang/da.auto index 2addf8b18..0a05b8e0a 100644 --- a/dhcpd/lang/da.auto +++ b/dhcpd/lang/da.auto @@ -1,6 +1,5 @@ index_title=DHCP-server index_subtitle=Undernet og delte netværk -index_comment=Description index_parent=Forældre index_start=Klik på denne knap for at starte DHCP-serveren på dit system ved hjælp af den aktuelle konfiguration. index_stop=Stop server diff --git a/dhcpd/lang/de b/dhcpd/lang/de index 723fd22a9..81d90a9cf 100644 --- a/dhcpd/lang/de +++ b/dhcpd/lang/de @@ -86,7 +86,6 @@ esub_groups=Gruppen direkt in diesem Subnetz esub_pools=Adresspools für Subnetz esub_pool=Pool $1 esub_poolnone=Keine Adresspools definiert - esub_pooladd=Einen Adresspool hinzufügen. esub_none=Keine esub_return=Subnetzliste @@ -140,6 +139,7 @@ egroup_desc=Gruppenbeschreibung default=Standard secs=Sek. none=Keine + listl_header=DHCP-Leases listl_network=Im Netzwerk $1/$2 listl_lfnotexist=Die DHCPd-Lease-Datei $1 existiert nicht. @@ -478,4 +478,4 @@ hdelete_title=Hosts und Gruppen löschen hdelete_rusure1=Sind Sie sicher, dass Sie die $1 ausgewählten Hosts und $2 Gruppen löschen möchten? Auch alle anderen Hosts innerhalb der Gruppen werden verloren gehen. hdelete_rusure2=Sind Sie sicher, dass Sie die $1 ausgewählten Hosts löschen möchten? hdelete_rusure3=Sind Sie sicher, dass Sie die $2 ausgewählten Gruppen löschen möchten? Auch alle Hosts innerhalb der Gruppen werden verloren gehen. -hdelete_ok=Jetzt löschen +hdelete_ok=Jetzt löschen \ No newline at end of file diff --git a/dhcpd/lang/el.auto b/dhcpd/lang/el.auto index ae3b7e238..ec13e88ab 100644 --- a/dhcpd/lang/el.auto +++ b/dhcpd/lang/el.auto @@ -14,7 +14,6 @@ index_memb=$1 μέλη index_hst=Υποδοχές και ομάδες υποδοχής index_nohst=Δεν έχουν καθοριστεί οικοδεσπότες ή ομάδες. index_hostgroup=Υποδοχή/Ομάδα -index_comment=Description index_parent=Μητρική εταιρεία index_hardware=Διεύθυνση υλικού index_group=Ομάδα: diff --git a/dhcpd/lang/es.auto b/dhcpd/lang/es.auto index 1bd2ea234..c25c8b758 100644 --- a/dhcpd/lang/es.auto +++ b/dhcpd/lang/es.auto @@ -1,6 +1,5 @@ index_key=Editar claves TSIG (utilizadas para autenticar actualizaciones en servidores DNS) index_dhcpdver2=El servidor DHCP $1 no parece ser la versión correcta. Webmin solo admite las versiones ISC DHCPD $2 a $3. -index_comment=Description index_desc=Descripción index_buttekey=Editar teclas TSIG index_stop=Detener servidor diff --git a/dhcpd/lang/eu.auto b/dhcpd/lang/eu.auto index 8d2e56065..676410dd4 100644 --- a/dhcpd/lang/eu.auto +++ b/dhcpd/lang/eu.auto @@ -14,7 +14,6 @@ index_memb=$1 kide index_hst=Ostalariak eta Ostalari taldeak index_nohst=Ez da ostalaririk edo talderik zehaztu. index_hostgroup=Ostalaria/Taldea -index_comment=Description index_parent=Guraso index_hardware=Hardwarearen helbidea index_group=taldea: diff --git a/dhcpd/lang/fa.auto b/dhcpd/lang/fa.auto index 8432a0abe..28a2f512d 100644 --- a/dhcpd/lang/fa.auto +++ b/dhcpd/lang/fa.auto @@ -1,4 +1,3 @@ -index_comment=Description index_stop=توقف سرور index_stopdesc=روی این دکمه کلیک کنید تا سرور DHCP در حال اجرا روی سیستم شما متوقف شود. هنگامی که متوقف شد ، مشتریان DHCP قادر به درخواست آدرس IP نخواهند بود. index_dhcpd=ISC DHCPd diff --git a/dhcpd/lang/fi.auto b/dhcpd/lang/fi.auto index 3bc218a4d..ebf10721e 100644 --- a/dhcpd/lang/fi.auto +++ b/dhcpd/lang/fi.auto @@ -14,7 +14,6 @@ index_memb=$1 jäsentä index_hst=Isännät ja isäntäryhmät index_nohst=Ei isäntiä tai ryhmiä ole määritelty. index_hostgroup=Isäntä/Ryhmä -index_comment=Description index_parent=vanhempi index_hardware=Laitteiston osoite index_group=Ryhmä: diff --git a/dhcpd/lang/fr.auto b/dhcpd/lang/fr.auto index c6bcf019a..077dc3bae 100644 --- a/dhcpd/lang/fr.auto +++ b/dhcpd/lang/fr.auto @@ -1,6 +1,5 @@ index_key=Modifier les clés TSIG (utilisées pour authentifier les mises à jour des serveurs DNS) index_dhcpdver2=Le serveur DHCP $1 ne semble pas être la version correcte. Webmin ne prend en charge que les versions ISC DHCPD $2 à $3. -index_comment=Description index_desc=La description index_buttekey=Modifier les clés TSIG index_stop=Arrêter le serveur diff --git a/dhcpd/lang/he.auto b/dhcpd/lang/he.auto index fbfb5bbaf..d2c6e0242 100644 --- a/dhcpd/lang/he.auto +++ b/dhcpd/lang/he.auto @@ -14,7 +14,6 @@ index_memb=$1 חברים index_hst=מארחים וקבוצות מארחים index_nohst=לא הוגדרו מארחים או קבוצות. index_hostgroup=מארח/קבוצה -index_comment=Description index_parent=הורה index_hardware=כתובת חומרה index_group=קבוצה: diff --git a/dhcpd/lang/hr.auto b/dhcpd/lang/hr.auto index 9aebb9fa0..e7899239b 100644 --- a/dhcpd/lang/hr.auto +++ b/dhcpd/lang/hr.auto @@ -14,7 +14,6 @@ index_memb=$1 članova index_hst=Domaćini i grupe domaćina index_nohst=Nisu definirani domaćini ili grupe. index_hostgroup=Domaćin/Grupa -index_comment=Description index_parent=Roditelj index_hardware=Adresa hardvera index_group=Skupina: diff --git a/dhcpd/lang/hu.auto b/dhcpd/lang/hu.auto index 5aeeed7c2..554a01784 100644 --- a/dhcpd/lang/hu.auto +++ b/dhcpd/lang/hu.auto @@ -14,7 +14,6 @@ index_memb=$1 tag index_hst=Házigazdák és fogadó csoportok index_nohst=Nincs meghatározva gazdagép vagy csoport. index_hostgroup=Host/Group -index_comment=Description index_parent=Szülő index_hardware=Hardver címe index_group=Csoport: diff --git a/dhcpd/lang/it.auto b/dhcpd/lang/it.auto index 4884c9fcb..b08142267 100644 --- a/dhcpd/lang/it.auto +++ b/dhcpd/lang/it.auto @@ -14,7 +14,6 @@ index_memb=$1 membri index_hst=Host e gruppi host index_nohst=Non sono stati definiti host o gruppi. index_hostgroup=Host/Gruppo -index_comment=Description index_parent=Genitore index_hardware=Indirizzo hardware index_group=Gruppo: diff --git a/dhcpd/lang/ja.auto b/dhcpd/lang/ja.auto index 78b4ef5d1..5e68c9bce 100644 --- a/dhcpd/lang/ja.auto +++ b/dhcpd/lang/ja.auto @@ -1,5 +1,4 @@ index_key=TSIGキーの編集（DNSサーバーへの更新の認証に使用） -index_comment=Description index_desc=説明 index_buttekey=TSIGキーの編集 index_stop=サーバーを停止 diff --git a/dhcpd/lang/ko.auto b/dhcpd/lang/ko.auto index 0d93f8bea..1fe1faac6 100644 --- a/dhcpd/lang/ko.auto +++ b/dhcpd/lang/ko.auto @@ -1,6 +1,5 @@ index_key=TSIG 키 편집 (DNS 서버에 대한 업데이트 인증에 사용) index_dhcpdver2=DHCP 서버 $1이 (가) 올바른 버전으로 보이지 않습니다. Webmin은 ISC DHCPD 버전 $2 ~ $3 만 지원합니다. -index_comment=Description index_desc=기술 index_buttekey=TSIG 키 편집 index_stop=서버 중지 diff --git a/dhcpd/lang/lt.auto b/dhcpd/lang/lt.auto index baa68b20d..c71f7ba7e 100644 --- a/dhcpd/lang/lt.auto +++ b/dhcpd/lang/lt.auto @@ -14,7 +14,6 @@ index_memb=$1 nariai index_hst=Šeimininkai ir priimančiosios grupės index_nohst=Nebuvo apibrėžta jokių šeimininkų ar grupių. index_hostgroup=Priimančioji/grupė -index_comment=Description index_parent=Tėvas index_hardware=Aparatūros adresas index_group=Grupė: diff --git a/dhcpd/lang/lv.auto b/dhcpd/lang/lv.auto index fe53abc02..87928f571 100644 --- a/dhcpd/lang/lv.auto +++ b/dhcpd/lang/lv.auto @@ -14,7 +14,6 @@ index_memb=$1 dalībnieki index_hst=Saimnieki un saimnieku grupas index_nohst=Nav definēti nekādi saimnieki vai grupas. index_hostgroup=Saimnieks/grupa -index_comment=Description index_parent=Vecāks index_hardware=Aparatūras adrese index_group=Grupa: diff --git a/dhcpd/lang/ms.auto b/dhcpd/lang/ms.auto index 2a4d0342c..c5daf6e9a 100644 --- a/dhcpd/lang/ms.auto +++ b/dhcpd/lang/ms.auto @@ -14,7 +14,6 @@ index_memb=$1 ahli index_hst=Hos dan Kumpulan Tuan Rumah index_nohst=Tiada tuan rumah atau kumpulan telah ditakrifkan. index_hostgroup=Hos/Kumpulan -index_comment=Description index_parent=Ibu bapa index_hardware=Alamat Perkakasan index_group=Kumpulan: diff --git a/dhcpd/lang/mt.auto b/dhcpd/lang/mt.auto index a044154ff..2eba0661e 100644 --- a/dhcpd/lang/mt.auto +++ b/dhcpd/lang/mt.auto @@ -14,7 +14,6 @@ index_memb=$1 membri index_hst=Ospitanti u Gruppi Ospitanti index_nohst=Ma ġew definiti l-ebda ospiti jew gruppi. index_hostgroup=Ospitanti/Grupp -index_comment=Description index_parent=Ġenitur index_hardware=Indirizz tal-Ħardwer index_group=Grupp: diff --git a/dhcpd/lang/nl.auto b/dhcpd/lang/nl.auto index 43c8fb5fc..c99a7d396 100644 --- a/dhcpd/lang/nl.auto +++ b/dhcpd/lang/nl.auto @@ -1,5 +1,3 @@ -index_comment=Description - acl_zones=Kan dynamische DNS-zones bewerken? zone_ecannot=Het is niet toegestaan om DNS-zones te bewerken diff --git a/dhcpd/lang/no.auto b/dhcpd/lang/no.auto deleted file mode 100644 index 31ba4172d..000000000 --- a/dhcpd/lang/no.auto +++ /dev/null @@ -1 +0,0 @@ -index_comment=Description diff --git a/dhcpd/lang/pl.auto b/dhcpd/lang/pl.auto deleted file mode 100644 index 31ba4172d..000000000 --- a/dhcpd/lang/pl.auto +++ /dev/null @@ -1 +0,0 @@ -index_comment=Description diff --git a/dhcpd/lang/pt.auto b/dhcpd/lang/pt.auto index 970e76f0f..ba805809b 100644 --- a/dhcpd/lang/pt.auto +++ b/dhcpd/lang/pt.auto @@ -1,7 +1,6 @@ index_key=Editar chaves TSIG (usadas para autenticar atualizações nos servidores DNS) index_dhcpdver2=O servidor DHCP $1 não parece estar na versão correta. O Webmin suporta apenas as versões ISC DHCPD $2 a $3. index_hostgroup=Anfitrião/Grupo -index_comment=Description index_parent=Pai index_hardware=Endereço de hardware index_group=Grupo: diff --git a/dhcpd/lang/pt_BR.auto b/dhcpd/lang/pt_BR.auto index f5c50203b..b7398c1f1 100644 --- a/dhcpd/lang/pt_BR.auto +++ b/dhcpd/lang/pt_BR.auto @@ -1,5 +1,3 @@ -index_comment=Description - listl_err=Falha ao excluir concessões listl_enone=Nenhum selecionado diff --git a/dhcpd/lang/ro.auto b/dhcpd/lang/ro.auto index 23d61f24f..18a8a69a4 100644 --- a/dhcpd/lang/ro.auto +++ b/dhcpd/lang/ro.auto @@ -14,7 +14,6 @@ index_memb=$1 membri index_hst=Gazde și grupuri de gazdă index_nohst=Nu a fost definită nicio gazdă sau grup. index_hostgroup=Gazdă/Grup -index_comment=Description index_parent=Mamă index_hardware=Adresa hardware index_group=Grup: diff --git a/dhcpd/lang/ru.auto b/dhcpd/lang/ru.auto index a0aa48fde..9dbbe4a9e 100644 --- a/dhcpd/lang/ru.auto +++ b/dhcpd/lang/ru.auto @@ -1,6 +1,5 @@ index_key=Редактировать TSIG-ключи (используется для аутентификации обновлений на DNS-серверах) index_dhcpdver2=Сервер DHCP $1 не является верной версией. Webmin поддерживает только ISC DHCPD версии от $2 до $3. -index_comment=Description index_desc=Описание index_buttekey=Редактировать TSIG-ключи index_stop=Остановить сервер diff --git a/dhcpd/lang/sk.auto b/dhcpd/lang/sk.auto index 9b054024b..350da73de 100644 --- a/dhcpd/lang/sk.auto +++ b/dhcpd/lang/sk.auto @@ -11,7 +11,6 @@ index_memb=$1 členov index_hst=Hostitelia a skupiny hostiteľov index_nohst=Neboli definovaní žiadni hostitelia ani skupiny. index_hostgroup=Host/Group -index_comment=Description index_parent=rodič index_nameip=Názov hostiteľa alebo IP index_buttego=Upravte možnosti klienta diff --git a/dhcpd/lang/sl.auto b/dhcpd/lang/sl.auto index 67cbf380d..f2111d89b 100644 --- a/dhcpd/lang/sl.auto +++ b/dhcpd/lang/sl.auto @@ -14,7 +14,6 @@ index_memb=$1 članov index_hst=Gostitelji in skupine gostiteljev index_nohst=Gostitelji ali skupine niso definirani. index_hostgroup=Gostitelj/skupina -index_comment=Description index_parent=Starš index_hardware=Naslov strojne opreme index_group=Skupina: diff --git a/dhcpd/lang/sv.auto b/dhcpd/lang/sv.auto index b2a4abd79..90fb89915 100644 --- a/dhcpd/lang/sv.auto +++ b/dhcpd/lang/sv.auto @@ -1,6 +1,5 @@ index_key=Redigera TSIG-nycklar (används för att verifiera uppdateringar till DNS-servrar) index_dhcpdver2=DHCP-servern $1 verkar inte vara rätt version. Webmin stöder endast ISC DHCPD-versioner $2 till $3. -index_comment=Description index_desc=Beskrivning index_buttekey=Redigera TSIG-nycklar index_stop=Stoppa servern diff --git a/dhcpd/lang/th.auto b/dhcpd/lang/th.auto index 9116a52f2..bacf9af49 100644 --- a/dhcpd/lang/th.auto +++ b/dhcpd/lang/th.auto @@ -14,7 +14,6 @@ index_memb=สมาชิก $1 index_hst=โฮสต์และกลุ่มโฮสต์ index_nohst=ไม่มีการกำหนดโฮสต์หรือกลุ่ม index_hostgroup=โฮสต์/กลุ่ม -index_comment=Description index_parent=ผู้ปกครอง index_hardware=ที่อยู่ฮาร์ดแวร์ index_group=กลุ่ม: diff --git a/dhcpd/lang/tr.auto b/dhcpd/lang/tr.auto index 1c9f07b8e..1260b144e 100644 --- a/dhcpd/lang/tr.auto +++ b/dhcpd/lang/tr.auto @@ -1,7 +1,6 @@ index_key=TSIG anahtarlarını düzenleme (DNS sunucularına yapılan güncelleştirmelerin kimliğini doğrulamak için kullanılır) index_dhcpdver2=DHCP sunucusu $1 doğru sürüm olarak görünmüyor. Webmin yalnızca ISC DHCPD $2 - $3 sürümlerini destekler. index_hostgroup=Host/Grup -index_comment=Description index_parent=ebeveyn index_hardware=Donanım Adresi index_group=Grup: diff --git a/dhcpd/lang/uk.auto b/dhcpd/lang/uk.auto index a7961bf42..64748d7ab 100644 --- a/dhcpd/lang/uk.auto +++ b/dhcpd/lang/uk.auto @@ -1,6 +1,5 @@ index_key=Редагування клавіш TSIG (використовується для автентифікації оновлень на серверах DNS) index_dhcpdver2=Сервер DHCP $1 не видається правильною версією. Webmin підтримує тільки ISC DHCPD версії $2 до $3. -index_comment=Description index_desc=Опис index_buttekey=Редагуйте клавіші TSIG index_stop=Зупинити сервер diff --git a/dhcpd/lang/ur.auto b/dhcpd/lang/ur.auto index ed9969350..9f6b84a9a 100644 --- a/dhcpd/lang/ur.auto +++ b/dhcpd/lang/ur.auto @@ -14,7 +14,6 @@ index_memb=$1 ممبران index_hst=میزبان اور میزبان گروپ index_nohst=کسی میزبان یا گروپ کی تعریف نہیں کی گئی ہے۔ index_hostgroup=میزبان/گروپ -index_comment=Description index_parent=والدین index_hardware=ہارڈویئر ایڈریس index_group=گروپ: diff --git a/dhcpd/lang/vi.auto b/dhcpd/lang/vi.auto index d7ff7cad3..43630fb22 100644 --- a/dhcpd/lang/vi.auto +++ b/dhcpd/lang/vi.auto @@ -14,7 +14,6 @@ index_memb=$1 thành viên index_hst=Máy chủ và nhóm máy chủ index_nohst=Không có máy chủ hoặc nhóm đã được xác định. index_hostgroup=Máy chủ/Nhóm -index_comment=Description index_parent=Cha mẹ index_hardware=Địa chỉ phần cứng index_group=Nhóm: diff --git a/dhcpd/lang/zh.auto b/dhcpd/lang/zh.auto index f44c90f29..d517d287f 100644 --- a/dhcpd/lang/zh.auto +++ b/dhcpd/lang/zh.auto @@ -1,6 +1,5 @@ index_key=编辑TSIG密钥（用于验证DNS服务器的更新） index_dhcpdver2=DHCP服务器$1似乎不是正确的版本。 Webmin仅支持ISC DHCPD版本 $2到 $3。 -index_comment=Description index_desc=描述 index_buttekey=编辑TSIG密钥 index_stop=停止服务器 diff --git a/dhcpd/lang/zh_TW.auto b/dhcpd/lang/zh_TW.auto index 02753eed9..577088186 100644 --- a/dhcpd/lang/zh_TW.auto +++ b/dhcpd/lang/zh_TW.auto @@ -1,5 +1,4 @@ index_dhcpdver2=DHCP服務器$1似乎不是正確的版本。 Webmin僅支持ISC DHCPD版本 $2到 $3。 -index_comment=Description listl_mode=顯示模式 ： listl_mode_0=DHCP租約 diff --git a/disk-usage/lang/af.auto b/disk-usage/lang/af.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/af.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/ar.auto b/disk-usage/lang/ar.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/ar.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/be.auto b/disk-usage/lang/be.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/be.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/bg.auto b/disk-usage/lang/bg.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/bg.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/ca.auto b/disk-usage/lang/ca.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/ca.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/cs.auto b/disk-usage/lang/cs.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/cs.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/da.auto b/disk-usage/lang/da.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/da.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/de b/disk-usage/lang/de index 81d91f13a..856650de2 100644 --- a/disk-usage/lang/de +++ b/disk-usage/lang/de @@ -18,4 +18,4 @@ sched_title=Geplante Sammlung sched_header=Optionen für die geplante Sammlung der Festplattennutzung sched_enabled=Geplante Sammlung aktiviert? sched_at=Ja, zu den unten ausgewählten Zeiten .. -sched_err=Fehler beim Speichern der geplanten Sammlung +sched_err=Fehler beim Speichern der geplanten Sammlung \ No newline at end of file diff --git a/disk-usage/lang/el.auto b/disk-usage/lang/el.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/el.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/es b/disk-usage/lang/es index 5c58cfa82..5833fdf03 100644 --- a/disk-usage/lang/es +++ b/disk-usage/lang/es @@ -9,11 +9,9 @@ index_return=arbol de uso index_dir=Directorio index_total=Total index_files=Archivos - run_title=Recoger Uso run_doing=Recogiendo uso de disco .. run_done=.. hecho - sched_title=Recogida Planificada sched_header=Opciones de recogida planificada de datos de uso de disco sched_enabled=¿Recogida planificada habilitada? diff --git a/disk-usage/lang/eu.auto b/disk-usage/lang/eu.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/eu.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/fa.auto b/disk-usage/lang/fa.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/fa.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/fi.auto b/disk-usage/lang/fi.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/fi.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/fr.auto b/disk-usage/lang/fr.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/fr.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/he.auto b/disk-usage/lang/he.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/he.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/hr.auto b/disk-usage/lang/hr.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/hr.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/hu.auto b/disk-usage/lang/hu.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/hu.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/it.auto b/disk-usage/lang/it.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/it.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/ja.auto b/disk-usage/lang/ja.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/ja.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/ko.auto b/disk-usage/lang/ko.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/ko.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/lt.auto b/disk-usage/lang/lt.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/lt.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/lv.auto b/disk-usage/lang/lv.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/lv.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/ms.auto b/disk-usage/lang/ms.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/ms.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/mt.auto b/disk-usage/lang/mt.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/mt.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/nl.auto b/disk-usage/lang/nl.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/nl.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/no.auto b/disk-usage/lang/no.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/no.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/pl.auto b/disk-usage/lang/pl.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/pl.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/pt.auto b/disk-usage/lang/pt.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/pt.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/pt_BR.auto b/disk-usage/lang/pt_BR.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/pt_BR.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/ro.auto b/disk-usage/lang/ro.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/ro.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/ru.auto b/disk-usage/lang/ru.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/ru.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/sk.auto b/disk-usage/lang/sk.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/sk.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/sl.auto b/disk-usage/lang/sl.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/sl.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/sv.auto b/disk-usage/lang/sv.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/sv.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/th.auto b/disk-usage/lang/th.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/th.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/tr.auto b/disk-usage/lang/tr.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/tr.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/uk.auto b/disk-usage/lang/uk.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/uk.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/ur.auto b/disk-usage/lang/ur.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/ur.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/vi.auto b/disk-usage/lang/vi.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/vi.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/zh.auto b/disk-usage/lang/zh.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/zh.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/disk-usage/lang/zh_TW.auto b/disk-usage/lang/zh_TW.auto deleted file mode 100644 index c3ecb0e9c..000000000 --- a/disk-usage/lang/zh_TW.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_none=No disk usage data has been collected yet. Either set up scheduled collection, or use the button below to collect data now. -index_sched=Setup Scheduled Collection -index_scheddesc=Click this button to set up the automatic scheduled collection of disk usage data for the configured directories. -index_run=Collect Usage Now -index_rundesc=Click here to scan the configured directories immediately to compute their disk usage. -index_for=For directory $1 -index_fors=For directories $1 -index_return=usage tree -index_dir=Directory -index_total=Total -index_files=Files - -run_title=Collect Usage -run_doing=Now collecting disk usage .. -run_done=.. done. - -sched_title=Scheduled Collection -sched_header=Scheduled disk usage collection options -sched_enabled=Scheduled collection enabled? -sched_at=Yes, at times selected below .. -sched_err=Failed to save scheduled collection diff --git a/dnsadmin/lang/af.auto b/dnsadmin/lang/af.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/af.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/ar.auto b/dnsadmin/lang/ar.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/ar.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/be.auto b/dnsadmin/lang/be.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/be.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/bg.auto b/dnsadmin/lang/bg.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/bg.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/cs.auto b/dnsadmin/lang/cs.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/cs.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/da.auto b/dnsadmin/lang/da.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/da.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/de b/dnsadmin/lang/de index 3f001481b..7924d2dd3 100644 --- a/dnsadmin/lang/de +++ b/dnsadmin/lang/de @@ -22,4 +22,4 @@ log_opts=Zonenoptionen für $1 geändert log_delete_record=$1-Eintrag $2 in Zone $3 gelöscht log_create_record=$1-Eintrag $2 in Zone $3 erstellt log_modify_record=$1-Eintrag $2 in Zone $3 geändert -log_boot=Primäre Konfigurationsdatei erstellt +log_boot=Primäre Konfigurationsdatei erstellt \ No newline at end of file diff --git a/dnsadmin/lang/el.auto b/dnsadmin/lang/el.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/el.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/eu.auto b/dnsadmin/lang/eu.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/eu.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/fa.auto b/dnsadmin/lang/fa.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/fa.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/fi.auto b/dnsadmin/lang/fi.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/fi.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/he.auto b/dnsadmin/lang/he.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/he.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/hr.auto b/dnsadmin/lang/hr.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/hr.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/hu.auto b/dnsadmin/lang/hu.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/hu.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/it.auto b/dnsadmin/lang/it.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/it.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/ko.auto b/dnsadmin/lang/ko.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/ko.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/lt.auto b/dnsadmin/lang/lt.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/lt.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/lv.auto b/dnsadmin/lang/lv.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/lv.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/ms.auto b/dnsadmin/lang/ms.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/ms.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/mt.auto b/dnsadmin/lang/mt.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/mt.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/no.auto b/dnsadmin/lang/no.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/no.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/pt.auto b/dnsadmin/lang/pt.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/pt.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/pt_BR.auto b/dnsadmin/lang/pt_BR.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/pt_BR.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/ro.auto b/dnsadmin/lang/ro.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/ro.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/ru.auto b/dnsadmin/lang/ru.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/ru.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/sk.auto b/dnsadmin/lang/sk.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/sk.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/sl.auto b/dnsadmin/lang/sl.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/sl.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/th.auto b/dnsadmin/lang/th.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/th.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/tr.auto b/dnsadmin/lang/tr.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/tr.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/uk.auto b/dnsadmin/lang/uk.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/uk.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/ur.auto b/dnsadmin/lang/ur.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/ur.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dnsadmin/lang/vi.auto b/dnsadmin/lang/vi.auto deleted file mode 100644 index 77b6746ef..000000000 --- a/dnsadmin/lang/vi.auto +++ /dev/null @@ -1,25 +0,0 @@ -log_servers=Changed other DNS servers -log_logging=Changed logging and errors -log_acls=Changed access control lists -log_files=Changed files and directories -log_forwarding=Changed forwarding and transfers -log_net=Changed addresses and topology -log_misc=Changed miscellaneous options -log_zonedef=Changed zone defaults -log_apply=Applied changes -log_start=Started DNS server -log_master=Created master zone $1 -log_slave=Created slave zone $1 -log_stub=Created stub zone $1 -log_forward=Created forward zone $1 -log_delete_master=Deleted master zone $1 -log_delete_slave=Deleted slave zone $1 -log_delete_stub=Deleted stub zone $1 -log_delete_forward=Deleted forward zone $1 -log_text=Manually edited records for $1 -log_soa=Changed zone parameters for $1 -log_opts=Changed zone options for $1 -log_delete_record=Deleted $1 record $2 in zone $3 -log_create_record=Created $1 record $2 in zone $3 -log_modify_record=Modified $1 record $2 in zone $3 -log_boot=Created primary configuration file diff --git a/dovecot/lang/af.auto b/dovecot/lang/af.auto index 0415536fa..edcfd17f1 100644 --- a/dovecot/lang/af.auto +++ b/dovecot/lang/af.auto @@ -92,11 +92,6 @@ login_plain=Gewone teks login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Data bron vir gebruikers, huise en ID's login_passwd=Standaard Unix gebruikersdatabasis login_passwdfile=Pasgemaakte wagwoordlêer $1 diff --git a/dovecot/lang/ar.auto b/dovecot/lang/ar.auto index 0f68b76ce..4a4442fa4 100644 --- a/dovecot/lang/ar.auto +++ b/dovecot/lang/ar.auto @@ -92,11 +92,6 @@ login_plain=نص عادي login_digest-md5=خلاصة-MD5 login_cram-md5=كرام-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=مصدر البيانات للمستخدمين والمنازل ومعرفات login_passwd=قاعدة بيانات المستخدم يونيكس القياسية login_passwdfile=Custom password file $1 diff --git a/dovecot/lang/be.auto b/dovecot/lang/be.auto index 3b3189238..ffc722f2a 100644 --- a/dovecot/lang/be.auto +++ b/dovecot/lang/be.auto @@ -92,11 +92,6 @@ login_plain=Звычайны тэкст login_digest-md5=Дайджэст-MD5 login_cram-md5=Cram-MD5 login_apop=АПОП -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Крыніца дадзеных для карыстальнікаў, дамоў і ідэнтыфікатараў login_passwd=Стандартная база дадзеных Unix login_passwdfile=Нестандартны файл пароля $1 diff --git a/dovecot/lang/bg.auto b/dovecot/lang/bg.auto index 3d777e6d2..b7c690392 100644 --- a/dovecot/lang/bg.auto +++ b/dovecot/lang/bg.auto @@ -1,7 +1 @@ net_ssl_required=Приемайте само SSL - -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication diff --git a/dovecot/lang/ca.auto b/dovecot/lang/ca.auto index 9d5d8aecc..85d6b0307 100644 --- a/dovecot/lang/ca.auto +++ b/dovecot/lang/ca.auto @@ -1,7 +1 @@ net_ssl_required=Només accepta SSL - -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication diff --git a/dovecot/lang/cs.auto b/dovecot/lang/cs.auto index 8c2b4bff0..3fc2ba0d0 100644 --- a/dovecot/lang/cs.auto +++ b/dovecot/lang/cs.auto @@ -7,12 +7,6 @@ ssl_prompt=Není potřeba ssl_eca=Chybějící nebo neexistující soubor certifikátů CA klienta ssl_epass=Nebylo zadáno žádné heslo souboru klíče SSL -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication - mail_index=Umístění souborů indexu mail_index0=Výchozí (v adresáři Maildir) mail_index1=Pouze v paměti diff --git a/dovecot/lang/da.auto b/dovecot/lang/da.auto index b56f0275b..75e1d061b 100644 --- a/dovecot/lang/da.auto +++ b/dovecot/lang/da.auto @@ -92,11 +92,6 @@ login_plain=Simpel tekst login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Datakilde til brugere, hjem og ID'er login_passwd=Standard Unix-brugerdatabase login_passwdfile=Tilpasset adgangskodefil $1 diff --git a/dovecot/lang/de b/dovecot/lang/de index 0c2cb9bdd..47b29962b 100644 --- a/dovecot/lang/de +++ b/dovecot/lang/de @@ -199,4 +199,4 @@ manual_editsel=Dovecot-Konfigurationsdatei bearbeiten manual_err=Konfigurationsdatei konnte nicht gespeichert werden manual_edata=Nichts eingegeben! manual_efile=Ausgewählte Konfigurationsdatei ist nicht gültig -manual_ok=Bearbeiten +manual_ok=Bearbeiten \ No newline at end of file diff --git a/dovecot/lang/el.auto b/dovecot/lang/el.auto index 7ac3ccb5f..30d52854d 100644 --- a/dovecot/lang/el.auto +++ b/dovecot/lang/el.auto @@ -92,11 +92,6 @@ login_plain=Απλό κείμενο login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Πηγή δεδομένων για χρήστες, σπίτια και αναγνωριστικά login_passwd=Βασική βάση δεδομένων χρηστών Unix login_passwdfile=Προσαρμοσμένο αρχείο κωδικού πρόσβασης $1 diff --git a/dovecot/lang/es.auto b/dovecot/lang/es.auto index 1ded5d4b6..7a0446f76 100644 --- a/dovecot/lang/es.auto +++ b/dovecot/lang/es.auto @@ -12,11 +12,6 @@ ssl_eca=Archivo de certificado de CA de cliente faltante o inexistente ssl_epass=No se ingresó la contraseña del archivo de clave SSL login_apop=UN ESTALLIDO -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_sql=Base de datos SQL, usando el archivo de configuración $1 login_session=Abrir y cerrar sesiones PAM login_pam2=Servicio PAM $1
$2
Use la clave de caché $3 diff --git a/dovecot/lang/eu.auto b/dovecot/lang/eu.auto index ba18fd89b..8fb6d3fc2 100644 --- a/dovecot/lang/eu.auto +++ b/dovecot/lang/eu.auto @@ -92,11 +92,6 @@ login_plain=Lautada-testua login_digest-md5=Laburtua-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Erabiltzaile, etxebizitza eta IDen datu-iturria login_passwd=Unix erabiltzaileen datu-base estandarra login_passwdfile=Pasahitz pertsonalizatuko fitxategia $1 diff --git a/dovecot/lang/fa.auto b/dovecot/lang/fa.auto index 3e9652e49..dd295616c 100644 --- a/dovecot/lang/fa.auto +++ b/dovecot/lang/fa.auto @@ -92,11 +92,6 @@ login_plain=متن ساده login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=برنامه -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=منبع داده برای کاربران ، خانه ها و شناسه ها login_passwd=بانک اطلاعاتی استاندارد یونیکس login_passwdfile=Custom password file $1 diff --git a/dovecot/lang/fi.auto b/dovecot/lang/fi.auto index d85700eb6..d929236f5 100644 --- a/dovecot/lang/fi.auto +++ b/dovecot/lang/fi.auto @@ -92,11 +92,6 @@ login_plain=Pelkkää tekstiä login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Tietolähde käyttäjille, koteille ja henkilöllisyystodistuksille login_passwd=Tavallinen Unix-käyttäjän tietokanta login_passwdfile=Muokattu salasanatiedosto $1 diff --git a/dovecot/lang/fr.auto b/dovecot/lang/fr.auto index 469139014..8a9fe02ef 100644 --- a/dovecot/lang/fr.auto +++ b/dovecot/lang/fr.auto @@ -81,11 +81,6 @@ login_plain=Texte brut login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Source de données pour les utilisateurs, les foyers et les identifiants login_passwd=Base de données utilisateur Unix standard login_passwdfile=Fichier de mot de passe personnalisé $1 diff --git a/dovecot/lang/he.auto b/dovecot/lang/he.auto index 109d99ffd..aede14c06 100644 --- a/dovecot/lang/he.auto +++ b/dovecot/lang/he.auto @@ -92,11 +92,6 @@ login_plain=טקסט רגיל login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=פופ -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=מקור נתונים למשתמשים, בתים ומזהים login_passwd=בסיס נתונים רגיל של יוניקס login_passwdfile=Custom password file $1 diff --git a/dovecot/lang/hr.auto b/dovecot/lang/hr.auto index dbceca20b..32cd86753 100644 --- a/dovecot/lang/hr.auto +++ b/dovecot/lang/hr.auto @@ -77,11 +77,6 @@ login_realms=Područja provjere autentičnosti SASL login_realm=Zadana oblast provjere autentičnosti login_mechs=Načini provjere autentičnosti login_plain=Običan tekst -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Izvor podataka za korisnike, domove i identifikacijske brojeve login_passwd=Standardna Unixova baza podataka korisnika login_passwdfile=Prilagođena datoteka zaporke $1 diff --git a/dovecot/lang/hu.auto b/dovecot/lang/hu.auto index cdf62fcd8..eaa3f682d 100644 --- a/dovecot/lang/hu.auto +++ b/dovecot/lang/hu.auto @@ -1,8 +1,2 @@ net_lmtp=LMTP net_ssl_required=Csak az SSL-t fogadja el - -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication diff --git a/dovecot/lang/it.auto b/dovecot/lang/it.auto index 602ad61e4..7a223fd3b 100644 --- a/dovecot/lang/it.auto +++ b/dovecot/lang/it.auto @@ -1,12 +1,6 @@ net_lmtp=LMTP net_ssl_required=Accetta solo SSL -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication - manual_editsel=Modifica il file di configurazione Dovecot manual_efile=Il file di configurazione selezionato non è valido manual_ok=modificare diff --git a/dovecot/lang/ja.auto b/dovecot/lang/ja.auto index aae1bd4c2..bb6587ea7 100644 --- a/dovecot/lang/ja.auto +++ b/dovecot/lang/ja.auto @@ -92,11 +92,6 @@ login_plain=平文 login_digest-md5=ダイジェスト-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=ユーザー、自宅、IDのデータソース login_passwd=標準のUnixユーザーデータベース login_passwdfile=カスタムパスワードファイル$1 diff --git a/dovecot/lang/ko.auto b/dovecot/lang/ko.auto index 0664c8d8a..7106bf14a 100644 --- a/dovecot/lang/ko.auto +++ b/dovecot/lang/ko.auto @@ -92,11 +92,6 @@ login_plain=일반 텍스트 login_digest-md5=다이제스트 -MD5 login_cram-md5=크램 MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=사용자, 주택 및 ID를위한 데이터 소스 login_passwd=표준 유닉스 사용자 데이터베이스 login_passwdfile=맞춤 비밀번호 파일 $1 diff --git a/dovecot/lang/lt.auto b/dovecot/lang/lt.auto index 3c12223d8..75c81ca4f 100644 --- a/dovecot/lang/lt.auto +++ b/dovecot/lang/lt.auto @@ -92,11 +92,6 @@ login_plain=Paprastas tekstas login_digest-md5=„Digest-MD5“ login_cram-md5=„Cram-MD5“ login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Duomenų šaltinis vartotojams, namams ir ID login_passwd=Standartinė „Unix“ vartotojų duomenų bazė login_passwdfile=Pasirinktinis slaptažodžio failas $1 diff --git a/dovecot/lang/lv.auto b/dovecot/lang/lv.auto index f3c9f9ef7..74e7718d6 100644 --- a/dovecot/lang/lv.auto +++ b/dovecot/lang/lv.auto @@ -92,11 +92,6 @@ login_plain=Vienkāršs teksts login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Datu avots lietotājiem, mājām un ID login_passwd=Standarta Unix lietotāju datu bāze login_passwdfile=Pielāgots paroles fails $1 diff --git a/dovecot/lang/ms.auto b/dovecot/lang/ms.auto index 711c51c7a..d1c736f22 100644 --- a/dovecot/lang/ms.auto +++ b/dovecot/lang/ms.auto @@ -92,11 +92,6 @@ login_plain=Teks kosong login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Sumber data untuk pengguna, rumah dan ID login_passwd=Pangkalan data pengguna Standard Unix login_passwdfile=Fail kata laluan tersuai $1 diff --git a/dovecot/lang/mt.auto b/dovecot/lang/mt.auto index 9337d2b88..73ebb43f7 100644 --- a/dovecot/lang/mt.auto +++ b/dovecot/lang/mt.auto @@ -92,11 +92,6 @@ login_plain=Test sempliċi login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Sors tad-dejta għall-utenti, djar u IDs login_passwd=Dejtabejżis tal-Utent Standard Unix login_passwdfile=Fajl tal-password apposta $1 diff --git a/dovecot/lang/nl.auto b/dovecot/lang/nl.auto index a0adb7a5a..bfa1e6564 100644 --- a/dovecot/lang/nl.auto +++ b/dovecot/lang/nl.auto @@ -1,7 +1 @@ net_ssl_required=Accepteer alleen SSL - -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication diff --git a/dovecot/lang/no.auto b/dovecot/lang/no.auto index b08690b8a..b06e0d095 100644 --- a/dovecot/lang/no.auto +++ b/dovecot/lang/no.auto @@ -1,7 +1 @@ net_ssl_required=Godta kun SSL - -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication diff --git a/dovecot/lang/pl.auto b/dovecot/lang/pl.auto index 36799fdd8..63a6a3b60 100644 --- a/dovecot/lang/pl.auto +++ b/dovecot/lang/pl.auto @@ -1,7 +1 @@ net_ssl_required=Akceptuj tylko SSL - -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication diff --git a/dovecot/lang/pt.auto b/dovecot/lang/pt.auto index 3284150b8..0fa789bc9 100644 --- a/dovecot/lang/pt.auto +++ b/dovecot/lang/pt.auto @@ -92,11 +92,6 @@ login_plain=Texto simples login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=UM ESTOURO -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Fonte de dados para usuários, residências e IDs login_passwd=Banco de dados padrão do usuário Unix login_passwdfile=Arquivo de senha personalizado $1 diff --git a/dovecot/lang/pt_BR.auto b/dovecot/lang/pt_BR.auto index 3284150b8..0fa789bc9 100644 --- a/dovecot/lang/pt_BR.auto +++ b/dovecot/lang/pt_BR.auto @@ -92,11 +92,6 @@ login_plain=Texto simples login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=UM ESTOURO -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Fonte de dados para usuários, residências e IDs login_passwd=Banco de dados padrão do usuário Unix login_passwdfile=Arquivo de senha personalizado $1 diff --git a/dovecot/lang/ro.auto b/dovecot/lang/ro.auto index 05128891d..ac3ecfa97 100644 --- a/dovecot/lang/ro.auto +++ b/dovecot/lang/ro.auto @@ -92,11 +92,6 @@ login_plain=Text simplu login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Sursa de date pentru utilizatori, case și ID-uri login_passwd=Baza de date utilizator standard Unix login_passwdfile=Fișier de parolă personalizat $1 diff --git a/dovecot/lang/ru.auto b/dovecot/lang/ru.auto index c8ba90c8e..442f8471c 100644 --- a/dovecot/lang/ru.auto +++ b/dovecot/lang/ru.auto @@ -92,11 +92,6 @@ login_plain=Простой текст login_digest-md5=Digest-MD5 login_cram-md5=Крам-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Источник данных для пользователей, домов и идентификаторов login_passwd=Стандартная пользовательская база данных Unix login_passwdfile=Файл пользовательских паролей $1 diff --git a/dovecot/lang/sk.auto b/dovecot/lang/sk.auto index a9887b5e5..ef02a0987 100644 --- a/dovecot/lang/sk.auto +++ b/dovecot/lang/sk.auto @@ -92,11 +92,6 @@ login_plain=Obyčajný text login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Zdroj údajov pre používateľov, domácnosti a identifikačné čísla login_passwd=Štandardná užívateľská databáza Unix login_passwdfile=Súbor vlastného hesla $1 diff --git a/dovecot/lang/sl.auto b/dovecot/lang/sl.auto index 6c8708278..f0f05bd51 100644 --- a/dovecot/lang/sl.auto +++ b/dovecot/lang/sl.auto @@ -92,11 +92,6 @@ login_plain=Golo besedilo login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Vir podatkov za uporabnike, domove in ID-je login_passwd=Standardna uporabniška baza podatkov Unix login_passwdfile=Datoteka z geslom po meri $1 diff --git a/dovecot/lang/sv.auto b/dovecot/lang/sv.auto index edc7758bb..2a970f7a7 100644 --- a/dovecot/lang/sv.auto +++ b/dovecot/lang/sv.auto @@ -92,11 +92,6 @@ login_plain=Oformatterad text login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=EN SMÄLL -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Datakälla för användare, hem och ID: er login_passwd=Standard Unix användardatabas login_passwdfile=Anpassad lösenordsfil $1 diff --git a/dovecot/lang/th.auto b/dovecot/lang/th.auto index 86f9c6c94..caf4b459c 100644 --- a/dovecot/lang/th.auto +++ b/dovecot/lang/th.auto @@ -92,11 +92,6 @@ login_plain=ข้อความธรรมดา login_digest-md5=Digest-MD5 login_cram-md5=อัด-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=แหล่งข้อมูลสำหรับผู้ใช้ที่อยู่อาศัยและรหัส login_passwd=ฐานข้อมูลผู้ใช้ Unix มาตรฐาน login_passwdfile=ไฟล์รหัสผ่านที่กำหนดเอง $1 diff --git a/dovecot/lang/tr.auto b/dovecot/lang/tr.auto index 70cf0bd83..dfacb2502 100644 --- a/dovecot/lang/tr.auto +++ b/dovecot/lang/tr.auto @@ -92,11 +92,6 @@ login_plain=Düz metin login_digest-md5=Digest-MD5 login_cram-md5=Cram-MD5 login_apop=BİR POP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Kullanıcılar, evler ve kimlikler için veri kaynağı login_passwd=Standart Unix kullanıcı veritabanı login_passwdfile=Özel şifre dosyası $1 diff --git a/dovecot/lang/uk.auto b/dovecot/lang/uk.auto index 77487386d..952b47900 100644 --- a/dovecot/lang/uk.auto +++ b/dovecot/lang/uk.auto @@ -92,11 +92,6 @@ login_plain=Простий текст login_digest-md5=Дайджест-MD5 login_cram-md5=Cram-MD5 login_apop=АПОП -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Джерело даних для користувачів, будинків та ідентифікаторів login_passwd=Стандартна база даних Unix login_passwdfile=Спеціальний файл пароля $1 diff --git a/dovecot/lang/ur.auto b/dovecot/lang/ur.auto index e4688f7b6..e74920043 100644 --- a/dovecot/lang/ur.auto +++ b/dovecot/lang/ur.auto @@ -92,11 +92,6 @@ login_plain=سادہ متن login_digest-md5=ڈائجسٹ- MD5 login_cram-md5=کرام- MD5 login_apop=اے پی او پی -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=صارفین ، گھروں اور IDs کے لئے ڈیٹا ماخذ login_passwd=معیاری یونکس صارف کا ڈیٹا بیس login_passwdfile=Custom password file $1 diff --git a/dovecot/lang/vi.auto b/dovecot/lang/vi.auto index 2bbea6ce8..45c03742f 100644 --- a/dovecot/lang/vi.auto +++ b/dovecot/lang/vi.auto @@ -92,11 +92,6 @@ login_plain=Văn bản thô login_digest-md5=Tiêu hóa-MD5 login_cram-md5=Cram-MD5 login_apop=APOP -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=Nguồn dữ liệu cho người dùng, nhà và ID login_passwd=Cơ sở dữ liệu người dùng Unix tiêu chuẩn login_passwdfile=Tệp mật khẩu tùy chỉnh $1 diff --git a/dovecot/lang/zh.auto b/dovecot/lang/zh.auto index 9b4dc7e6b..e63715ce0 100644 --- a/dovecot/lang/zh.auto +++ b/dovecot/lang/zh.auto @@ -92,11 +92,6 @@ login_plain=纯文本 login_digest-md5=文摘-MD5 login_cram-md5=补习班-MD5 login_apop=阿波 -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication login_userdb=用户，房屋和ID的数据源 login_passwd=标准Unix用户数据库 login_passwdfile=自定义密码文件$1 diff --git a/dovecot/lang/zh_TW.auto b/dovecot/lang/zh_TW.auto index d8d387195..cc3c17392 100644 --- a/dovecot/lang/zh_TW.auto +++ b/dovecot/lang/zh_TW.auto @@ -7,12 +7,6 @@ ssl_prompt=不需要 ssl_eca=客戶端CA證書文件缺失或不存在 ssl_epass=沒有輸入SSL密鑰文件密碼 -login_otp=One time password -login_skey=Security key -login_oauthbearer=OAuth2 bearer authentication -login_xoauth2=Google OAuth2 bearer authentication -login_external=External SASL authentication - manual_editsel=編輯Dovecot配置文件 manual_efile=所選的配置文件無效 manual_ok=編輯 diff --git a/export-call/lang/af.auto b/export-call/lang/af.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/af.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/ar.auto b/export-call/lang/ar.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/ar.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/be.auto b/export-call/lang/be.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/be.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/bg.auto b/export-call/lang/bg.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/bg.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/ca.auto b/export-call/lang/ca.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/ca.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/cs.auto b/export-call/lang/cs.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/cs.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/da.auto b/export-call/lang/da.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/da.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/de.auto b/export-call/lang/de.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/de.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/el.auto b/export-call/lang/el.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/el.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/es.auto b/export-call/lang/es.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/es.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/eu.auto b/export-call/lang/eu.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/eu.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/fa.auto b/export-call/lang/fa.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/fa.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/fi.auto b/export-call/lang/fi.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/fi.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/fr.auto b/export-call/lang/fr.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/fr.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/he.auto b/export-call/lang/he.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/he.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/hr.auto b/export-call/lang/hr.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/hr.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/hu.auto b/export-call/lang/hu.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/hu.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/it.auto b/export-call/lang/it.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/it.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/ja.auto b/export-call/lang/ja.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/ja.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/ko.auto b/export-call/lang/ko.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/ko.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/lt.auto b/export-call/lang/lt.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/lt.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/lv.auto b/export-call/lang/lv.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/lv.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/ms.auto b/export-call/lang/ms.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/ms.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/mt.auto b/export-call/lang/mt.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/mt.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/nl.auto b/export-call/lang/nl.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/nl.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/no.auto b/export-call/lang/no.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/no.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/pl.auto b/export-call/lang/pl.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/pl.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/pt.auto b/export-call/lang/pt.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/pt.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/pt_BR.auto b/export-call/lang/pt_BR.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/pt_BR.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/ro.auto b/export-call/lang/ro.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/ro.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/ru.auto b/export-call/lang/ru.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/ru.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/sk.auto b/export-call/lang/sk.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/sk.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/sl.auto b/export-call/lang/sl.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/sl.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/sv.auto b/export-call/lang/sv.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/sv.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/th.auto b/export-call/lang/th.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/th.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/tr.auto b/export-call/lang/tr.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/tr.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/uk.auto b/export-call/lang/uk.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/uk.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/ur.auto b/export-call/lang/ur.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/ur.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/vi.auto b/export-call/lang/vi.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/vi.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/zh.auto b/export-call/lang/zh.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/zh.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-call/lang/zh_TW.auto b/export-call/lang/zh_TW.auto deleted file mode 100644 index 55d1ef086..000000000 --- a/export-call/lang/zh_TW.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=This is from the other module -my_subs=Your name in the other module is $1 diff --git a/export-test/lang/af.auto b/export-test/lang/af.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/af.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/ar.auto b/export-test/lang/ar.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/ar.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/be.auto b/export-test/lang/be.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/be.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/bg.auto b/export-test/lang/bg.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/bg.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/ca.auto b/export-test/lang/ca.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/ca.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/cs.auto b/export-test/lang/cs.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/cs.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/da.auto b/export-test/lang/da.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/da.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/de.auto b/export-test/lang/de.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/de.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/el.auto b/export-test/lang/el.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/el.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/es.auto b/export-test/lang/es.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/es.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/eu.auto b/export-test/lang/eu.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/eu.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/fa.auto b/export-test/lang/fa.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/fa.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/fi.auto b/export-test/lang/fi.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/fi.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/fr.auto b/export-test/lang/fr.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/fr.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/he.auto b/export-test/lang/he.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/he.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/hr.auto b/export-test/lang/hr.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/hr.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/hu.auto b/export-test/lang/hu.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/hu.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/it.auto b/export-test/lang/it.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/it.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/ja.auto b/export-test/lang/ja.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/ja.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/ko.auto b/export-test/lang/ko.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/ko.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/lt.auto b/export-test/lang/lt.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/lt.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/lv.auto b/export-test/lang/lv.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/lv.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/ms.auto b/export-test/lang/ms.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/ms.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/mt.auto b/export-test/lang/mt.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/mt.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/nl.auto b/export-test/lang/nl.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/nl.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/no.auto b/export-test/lang/no.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/no.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/pl.auto b/export-test/lang/pl.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/pl.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/pt.auto b/export-test/lang/pt.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/pt.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/pt_BR.auto b/export-test/lang/pt_BR.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/pt_BR.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/ro.auto b/export-test/lang/ro.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/ro.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/ru.auto b/export-test/lang/ru.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/ru.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/sk.auto b/export-test/lang/sk.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/sk.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/sl.auto b/export-test/lang/sl.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/sl.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/sv.auto b/export-test/lang/sv.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/sv.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/th.auto b/export-test/lang/th.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/th.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/tr.auto b/export-test/lang/tr.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/tr.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/uk.auto b/export-test/lang/uk.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/uk.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/ur.auto b/export-test/lang/ur.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/ur.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/vi.auto b/export-test/lang/vi.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/vi.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/zh.auto b/export-test/lang/zh.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/zh.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/export-test/lang/zh_TW.auto b/export-test/lang/zh_TW.auto deleted file mode 100644 index 3e1bd9481..000000000 --- a/export-test/lang/zh_TW.auto +++ /dev/null @@ -1,2 +0,0 @@ -my_msg=Some message here -my_subs=Your name is $1 diff --git a/exports-nfs4/lang/af.auto b/exports-nfs4/lang/af.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/af.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/ar.auto b/exports-nfs4/lang/ar.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/ar.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/be.auto b/exports-nfs4/lang/be.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/be.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/bg.auto b/exports-nfs4/lang/bg.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/bg.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/ca b/exports-nfs4/lang/ca index 14b9f9df4..e556f4e56 100644 --- a/exports-nfs4/lang/ca +++ b/exports-nfs4/lang/ca @@ -8,7 +8,6 @@ index_apply=Aplica els Canvis index_applymsg=Fes clic sobre aquest botó per aplicar la configuració actual d'exportacions. Això farà que tots els directoris llistats més amunt estiguin disponibles amb les opcions especificades. index_return=a la llista d'exportació index_eprog=No s'ha trobat el sistema l'executable servidor NFS. No sembla que el paquet NFS estigui instal·lat. - edit_title=Edició d'Exportació create_title=Creació d'Exportació edit_details=Exporta els detalls @@ -54,7 +53,6 @@ edit_sync1=$yes edit_sync2=$no edit_sync0=$default edit_in=en - save_err=No he pogut desar l'exportació save_edir=El directori '$1' no existeix save_enetgroup=Hi falta el grup de xarxa o és invàlid @@ -65,7 +63,6 @@ save_euids=Els UIDs no fiables han de ser una llista de números o rangs separad save_egids=Els GIDs no fiables han de ser una llista de números o rangs separada per comes save_pfs='$1' ja està exportat com a directori save_create_dir=No puc crear el directori '$1' - exports_webnfs=Clients WebNFS exports_ngroup=Grup de xarxa $1 exports_net=Xarxa $1 @@ -73,7 +70,6 @@ exports_all=Tothom exports_hosts=Hosts $1 exports_host=Host $1 exports_gss=Xarxa autenticada: $1 - log_modify=He modificat l'exportació NFS $1 log_modify_l=He modificat l'exportació NFS $1 a $2 log_delete=He suprimit l'exportació NFS $1 diff --git a/exports-nfs4/lang/ca.auto b/exports-nfs4/lang/ca.auto deleted file mode 100644 index ae072c61f..000000000 --- a/exports-nfs4/lang/ca.auto +++ /dev/null @@ -1,22 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/cs.auto b/exports-nfs4/lang/cs.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/cs.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/da.auto b/exports-nfs4/lang/da.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/da.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/de b/exports-nfs4/lang/de index dd85a4986..1509b05ff 100644 --- a/exports-nfs4/lang/de +++ b/exports-nfs4/lang/de @@ -99,4 +99,4 @@ hostsec_flavors=Geordnete Liste der für diesen Host zulässigen Sicherheitsstuf hostsec_up=Nach oben hostsec_down=Nach unten hostsec_supported=Unterstützt -hostsec_enabled=Aktiviert +hostsec_enabled=Aktiviert \ No newline at end of file diff --git a/exports-nfs4/lang/el.auto b/exports-nfs4/lang/el.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/el.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/es b/exports-nfs4/lang/es index c19f79af0..af1684139 100644 --- a/exports-nfs4/lang/es +++ b/exports-nfs4/lang/es @@ -8,7 +8,6 @@ index_apply=Aplicar Cambios index_applymsg=Haz click en este botón para aplicar las configuraciones actuales de exportación de archivos. Esto hará que todos los directorios listados arriba estén disponibles con las opciones especificadas. index_return=lista de exportaciones index_eprog=El ejecutable del servidor NFS no ha sido encontrado en tu sistema. El paquete NFS no parece haber sido instalado. - edit_title=Editar Exportación create_title=Crear Exportación edit_details=Detalles de Exportación @@ -37,7 +36,6 @@ edit_gids=No confiar en GIDs edit_anonuid=Tratar usuarios no fiables como edit_default=Por defecto edit_anongid=Tratar grupos no fiables como - save_err=Error al salvar exportación save_edir=Directorio '$1' no existe save_enetgroup=Grupo de Red inválido o perdido @@ -46,14 +44,12 @@ save_enetmask='$1' no es una máscara de red válida save_ehost='$1' no es una máquina válida save_euids=UIDs no fiables deben de ser una lista de números o rangos separados por comas save_egids=GIDs no fiables deben de ser una lista de números o rangos separados por comas - exports_webnfs=WebNFS clientes exports_ngroup=Netgroup $1 exports_net=Network $1 exports_all=Cada uno exports_hosts=Hosts $1 exports_host=Host $1 - log_modify=Modificada exportación NFS $1 log_modify_l=Modificada exportación NFS $1 a $2 log_delete=Borrada exportación NFS $1 diff --git a/exports-nfs4/lang/es.auto b/exports-nfs4/lang/es.auto deleted file mode 100644 index d0891a5b7..000000000 --- a/exports-nfs4/lang/es.auto +++ /dev/null @@ -1,43 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) -edit_address=Address -edit_prefix=/ -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_gss=Authenticated network: $1 - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/eu.auto b/exports-nfs4/lang/eu.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/eu.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/fa.auto b/exports-nfs4/lang/fa.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/fa.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/fi.auto b/exports-nfs4/lang/fi.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/fi.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/fr b/exports-nfs4/lang/fr index d83348802..13fbd04d1 100644 --- a/exports-nfs4/lang/fr +++ b/exports-nfs4/lang/fr @@ -8,7 +8,6 @@ index_apply=Appliquer tous les changements index_applymsg=Cliquer sur ce bouton pour appliquer la configuration. Ceci va rendre tous répertoires listés disponibles avec les options spécifiées. index_return=liste des partages index_eprog=L'exécutable du serveur NFS n'a pas été trouvé sur votre système. Le paquetage NFS ne semble pas avoir été installé. - edit_title=Éditer un Partage create_title=Créer un Partage edit_details=Détails du partage @@ -54,7 +53,6 @@ edit_sync1=$yes edit_sync2=$no edit_sync0=$default edit_in=dans - save_err=Impossible d'enregistrer le partage save_edir=Le répertoire '$1' n'existe pas save_enetgroup=Groupe de réseau manquant ou invalide @@ -65,7 +63,6 @@ save_euids=Les UIDs non sûrs doivent être une liste de nombres ou d'intervalle save_egids=Les GIDs non sûrs doivent être une liste de nombres ou d'intervalles séparés par des virgules save_pfs=$1 est déjà partagé en tant que répertoire save_create_dir=Impossible de créer le répertoire '$1' - exports_webnfs=Clients WebNFS exports_ngroup=Groupe réseau $1 exports_net=Réseau $1 @@ -73,7 +70,6 @@ exports_all=Tous exports_hosts=Machines $1 exports_host=Machine $1 exports_gss=Réseau authentifié: $1 - log_modify=Export NFS $1 modifié log_modify_l=Export NFS $1 modifié sur $2 log_delete=Export NFS $1 supprimé @@ -81,7 +77,6 @@ log_delete_l=Export NFS $1 supprimé sur $2 log_create=Export NFS $1 créé log_create_l=Export NFS $1 créé sur $2 log_apply=Configuration appliquée - hostsec_host=Machines authorisées a monter le systême de fichiers hostsec_flavors=Liste des saveurs de sécurité authorisées pour ces machines hostsec_up=Haut diff --git a/exports-nfs4/lang/fr.auto b/exports-nfs4/lang/fr.auto deleted file mode 100644 index bbc6ac6ad..000000000 --- a/exports-nfs4/lang/fr.auto +++ /dev/null @@ -1,15 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. diff --git a/exports-nfs4/lang/he.auto b/exports-nfs4/lang/he.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/he.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/hr.auto b/exports-nfs4/lang/hr.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/hr.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/hu.auto b/exports-nfs4/lang/hu.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/hu.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/it b/exports-nfs4/lang/it index 1fa82979e..f7238e5b2 100644 --- a/exports-nfs4/lang/it +++ b/exports-nfs4/lang/it @@ -8,7 +8,6 @@ index_apply=Applica i cambiamenti index_applymsg=Clicca per attivare la condivisione attualmente impostate nel file. Questo comporterà la condivisione di tutte le cartelle indicate sopra con le opzioni specificate. index_return=Lista delle condivisioni index_eprog=Il server NFS non è stato trovato sul tuo sistema. Il pacchetto non sembra essere installato. - edit_title=Modifica le condivisioni create_title=Crea le condivisioni edit_details=Dettagli delle condivisioni @@ -37,7 +36,6 @@ edit_gids=Non accettare GIDs edit_anonuid=Tratta gli utenti non autorizzati come edit_default=Default edit_anongid=Tratta i gruppi non autorizzati come - save_err=Fallito salvataggio delle condivisioni save_edir=La cartella '$1' non esiste save_enetgroup=Netgroup inesistente o non valido @@ -46,14 +44,12 @@ save_enetmask='$1' non è una netmask valida save_ehost='$1' non è un nome valido save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges - exports_webnfs=WebNFS clients exports_ngroup=Netgroup $1 exports_net=Rete $1 exports_all=Tutti exports_hosts=Hosts $1 exports_host=Host $1 - log_modify=Modificata la condivisione NFS $1 log_modify_l=Modificata la condivisione NFS da $1 a $2 log_delete=Cancellata la condivisione NFS $1 diff --git a/exports-nfs4/lang/it.auto b/exports-nfs4/lang/it.auto deleted file mode 100644 index d0891a5b7..000000000 --- a/exports-nfs4/lang/it.auto +++ /dev/null @@ -1,43 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) -edit_address=Address -edit_prefix=/ -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_gss=Authenticated network: $1 - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/ja b/exports-nfs4/lang/ja index d4a50113b..a22d99ad4 100644 --- a/exports-nfs4/lang/ja +++ b/exports-nfs4/lang/ja @@ -8,7 +8,6 @@ index_apply=変更を適用 index_applymsg=現在のファイルのエクスポート設定を適用するには、このボタンをクリックしてください。指定したオプションを上に表示されたすべてのディレクトリで有効にします。 index_return=エクスポート リスト index_eprog=NFS サーバの実行ファイルがシステムにありませんでした。NFS パッケージがインストールされていないと思われます。 - edit_title=エクスポートの編集 create_title=エクスポートの作成 edit_details=エクスポートの詳細 @@ -37,7 +36,6 @@ edit_gids=GID を信頼しない edit_anonuid=信頼されていない ユーザを次として扱う edit_default=デフォルト edit_anongid=信頼されていない グループを次として扱う - save_err=エクスポートを保存できませんでした save_edir=ディレクトリ '$1' は存在しません save_enetgroup=netgroup が無効かありません @@ -46,14 +44,12 @@ save_enetmask='$1' は無効なネットマスクです save_ehost='$1' は無効なホスト名です save_euids=UID は信頼できません。コンマで区切られたメンバーまたは範囲のリストである必要があります。 save_egids=GID は信頼できません。コンマで区切られたメンバーまたは範囲のリストである必要があります。 - exports_webnfs=WebNFS クライアント exports_ngroup=Netgroup $1 exports_net=ネットワーク $1 exports_all=全員 exports_hosts=ホスト $1 exports_host=ホスト $1 - log_modify=NFS エクスポート $1 を変更しました log_modify_l=$2 へのNFS エクスポート $1 を変更しました log_delete=NFS エクスポート$1 を削除しました diff --git a/exports-nfs4/lang/ja.auto b/exports-nfs4/lang/ja.auto deleted file mode 100644 index d0891a5b7..000000000 --- a/exports-nfs4/lang/ja.auto +++ /dev/null @@ -1,43 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) -edit_address=Address -edit_prefix=/ -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_gss=Authenticated network: $1 - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/ko b/exports-nfs4/lang/ko index b3a3dbea8..ee1b78f11 100644 --- a/exports-nfs4/lang/ko +++ b/exports-nfs4/lang/ko @@ -8,7 +8,6 @@ index_apply=변경 내용 적용 index_applymsg=현재 파일의 내보내기 구성을 적용하려면 이 버튼을 누르십시오. 그러면 위에 나열된 모든 디렉토리에 이 옵션이 적용됩니다. index_return=내보내기 목록 index_eprog=시스템에 NFS 서버 실행 파일이 없습니다. NFS 패키지가 설치되어 있지 않습니다. - edit_title=내보내기 편집 create_title=내보내기 작성 edit_details=내보내기 세부 정보 @@ -37,7 +36,6 @@ edit_gids=GID 신뢰 안함 edit_anonuid=신뢰할 수 없는 사용자 edit_default=기본값 edit_anongid=신뢰할 수 없는 그룹 - save_err=내보내기를 저장하지 못했습니다 save_edir=디렉토리 '$1'이(가) 존재하지 않습니다 save_enetgroup=없거나 잘못된 넷그룹 @@ -46,14 +44,12 @@ save_enetmask='$1'은(는) 유효한 넷마스크가 아닙니다 save_ehost='$1'은(는) 유효한 호스트 이름이 아닙니다 save_euids=신뢰할 수 없는 UID는 숫자나 숫자 범위로 지정된 쉼표로 구분된 목록이어야 합니다 save_egids=신뢰할 수 없는 GID는 숫자나 숫자 범위로 지정된 쉼표로 구분된 목록이어야 합니다. - exports_webnfs=WebNFS 클라이언트 exports_ngroup=넷그룹 $1 exports_net=네트워크 $1 exports_all=모든 사용자 exports_hosts=호스트 $1 exports_host=호스트 $1 - log_modify=NFS 내보내기 $1 수정됨 log_modify_l=$2(으)로의 NFS 내보내기 $1이 수정됨 log_delete=NFS 내보내기 $1 삭제됨 diff --git a/exports-nfs4/lang/ko.auto b/exports-nfs4/lang/ko.auto deleted file mode 100644 index d0891a5b7..000000000 --- a/exports-nfs4/lang/ko.auto +++ /dev/null @@ -1,43 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) -edit_address=Address -edit_prefix=/ -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_gss=Authenticated network: $1 - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/lt.auto b/exports-nfs4/lang/lt.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/lt.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/lv.auto b/exports-nfs4/lang/lv.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/lv.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/ms b/exports-nfs4/lang/ms index 2fd632b6a..cfdf46181 100644 --- a/exports-nfs4/lang/ms +++ b/exports-nfs4/lang/ms @@ -8,7 +8,6 @@ index_apply=Terapkan perubahan index_applymsg=Klik butang ini untuk terapkan konfigurasi eksport fail semasa.Ini akan menyebabkan semua direktori yang disenaraikan diatas wujud bersama dengan pilihan yang ditetapkan. index_return=lis export index_eprog=Tidak terdapat Pelayan NFS boleh laksana dalamsistem anda. Pekej NFS seperti tidak dipasang. - edit_title=Ubah Eksport create_title=Cipta Eksport edit_details=Perincian Eksport @@ -37,7 +36,6 @@ edit_gids=Jangan percaya GIDs edit_anonuid=Perlakukan pengguna tidak dipercayai sebagai edit_default=Default edit_anongid=Perlakukan kumpulan tidak dipercayai sebagai - save_err=Gagal untuk menyimpan save_edir=Direktori '$1' tidak wujud save_enetgroup=Netgroup tidak sah atau hilang @@ -46,14 +44,12 @@ save_enetmask='$1' bukanlah netmask yang sah save_ehost='$1' bukanlah namahos yang sah save_euids=UID yang tidak dipercayai mestilah lis nombor atau jarak yang diasingkan dengan koma save_egids=GID yang tidak dipercayai mestilah lis nombor atau jarak yang diasingkan dengan koma - exports_webnfs=Klien WebNFS  exports_ngroup=Netgroup $1 exports_net=Rangkaian $1 exports_all=Semua exports_hosts=Hos $1 exports_host=Hos $1 - log_modify=Ubah eksport NFS $1 log_modify_l=Ubah eksport NFS $1 kepada $2 log_delete=Padam eksport NFS $1 diff --git a/exports-nfs4/lang/ms.auto b/exports-nfs4/lang/ms.auto deleted file mode 100644 index d0891a5b7..000000000 --- a/exports-nfs4/lang/ms.auto +++ /dev/null @@ -1,43 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) -edit_address=Address -edit_prefix=/ -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_gss=Authenticated network: $1 - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/mt.auto b/exports-nfs4/lang/mt.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/mt.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/nl.auto b/exports-nfs4/lang/nl.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/nl.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/no b/exports-nfs4/lang/no index 278c2d836..f12f025e2 100644 --- a/exports-nfs4/lang/no +++ b/exports-nfs4/lang/no @@ -1,102 +1,96 @@ -index_title=NFS Eksporter -index_dir=Katalog -index_inactive=Inaktiv -index_to=Eksportert til.. -index_none=Du eksporterer ikke noen kataloger enda. +alert_no_nfsv4root=Ingen NFSv4 virtuell rot er definert!\n Du må først definere en katalog dom NFSv4 root og så binde noen kataloger under denne roten. +create_title=Opprett eksport +edit_active=Aktiv? +edit_address=Adresse +edit_all=Alle +edit_anongid=Behandle ubetrodde grupper som +edit_anonuid=Behandle ubetrodde brukere som +edit_auth=(med eller uten Autentisering) +edit_default=Standard +edit_details=Eksport detaljer +edit_dir=Katalog som skal eksporteres +edit_everyone=Alle +edit_except=Alle unntatt root +edit_gids=Ikke stol på GIDer +edit_hide=Skjul filsystemet? +edit_host=Vert(er) +edit_in=i +edit_insecure=Klienter må være på sikker port? +edit_integrity=Integritet +edit_ispfs=NFSv4 root +edit_mode=Tilgangsmodus +edit_netgroup=NIS Nettgruppe +edit_netmask=Nettmaske +edit_network=Nettverk +edit_nfs_vers=NFS Versjon +edit_noaccess=Nekt tilgang til katalog? +edit_nobody=Ingen +edit_none=Ingen +edit_pfs=NFSv4 Pseudofilsystem som skal eksporteres +edit_prefix=/ +edit_privacy=Hemmelighold (inkludert Integritet) +edit_relative=Gjør symbolske lenker relative? +edit_ro=Bare-les? +edit_sec=Sikkerhetsnivå +edit_security=Eksporter sikkerhet +edit_squash=Stol på eksterne brukere +edit_subtree_check=Deaktiver sjekking av under-tre? +edit_sync=Synk. alle skrivinger øyeblikketlig? +edit_sync0=Standard +edit_sync1=Ja +edit_sync2=Nei +edit_title=Rediger eksport +edit_to=Eksporter til.. +edit_to_detail=(verter og tilknyttede sikkerhetstyper) +edit_uids=Ikke stol på UIDene +edit_v2opts=NFSv2-spesifikke innstillinger +edit_vers=NFS Versjon +edit_webnfs=WebNFS klienter +exports_all=Alle +exports_gss=Autentisert nettverk: $1 +exports_host=Vert;nbsp;$1 +exports_hosts=Verter;nbsp;$1 +exports_net=Nettverk;nbsp;$1 +exports_ngroup=Nettgruppe;nbsp;$1 +exports_webnfs=WebNFS klienter +hostsec_down=Ned +hostsec_enabled=Aktivert +hostsec_flavors=Sortert liste over sikkerhetstyper tillatt for denne verten +hostsec_host=Vert valg +hostsec_supported=Støttet +hostsec_up=Opp index_add=Legg til ny eksport. index_apply=Bruk endringer index_applymsg=Klikk på denne knappen for å ta i bruk gjeldende fileksport konfigurasjon. Dette vil gjøre alle kataloger angitt ovenfor, tilgjengelige med de spesifiserte innstillingene. -index_return=liste over eksporter -index_return_edit=rediger eksporter -index_eprog=Fant ikke NFS tjener programmet på systemet ditt. Det ser ikke ut til at NFS pakken er installert. index_delete=Slett valgte eksporter +index_dir=Katalog index_disable=Deaktiver valgte index_enable=Aktiver valgte +index_eprog=Fant ikke NFS tjener programmet på systemet ditt. Det ser ikke ut til at NFS pakken er installert. +index_inactive=Inaktiv +index_none=Du eksporterer ikke noen kataloger enda. +index_return=liste over eksporter +index_return_edit=rediger eksporter +index_title=NFS Eksporter +index_to=Eksportert til.. index_vr=virtuell rot - -edit_title=Rediger eksport -create_title=Opprett eksport -edit_details=Eksport detaljer -edit_dir=Katalog som skal eksporteres -edit_vers=NFS Versjon -edit_nfs_vers=NFS Versjon -edit_pfs=NFSv4 Pseudofilsystem som skal eksporteres -edit_ispfs=NFSv4 root -edit_active=Aktiv? -edit_to=Eksporter til.. -edit_to_detail=(verter og tilknyttede sikkerhetstyper) -edit_all=Alle -edit_host=Vert(er) -edit_webnfs=WebNFS klienter -edit_netgroup=NIS Nettgruppe -edit_network=Nettverk -edit_netmask=Nettmaske -edit_address=Adresse -edit_prefix=/ -edit_relative=Gjør symbolske lenker relative? -edit_insecure=Klienter må være på sikker port? -edit_security=Eksporter sikkerhet -edit_mode=Tilgangsmodus -edit_ro=Bare-les? -edit_subtree_check=Deaktiver sjekking av under-tre? -edit_hide=Skjul filsystemet? -edit_auth=(med eller uten Autentisering) -edit_sec=Sikkerhetsnivå -edit_integrity=Integritet -edit_privacy=Hemmelighold (inkludert Integritet) -edit_v2opts=NFSv2-spesifikke innstillinger -edit_noaccess=Nekt tilgang til katalog? -edit_squash=Stol på eksterne brukere -edit_everyone=Alle -edit_except=Alle unntatt root -edit_nobody=Ingen -edit_uids=Ikke stol på UIDene -edit_none=Ingen -edit_gids=Ikke stol på GIDer -edit_anonuid=Behandle ubetrodde brukere som -edit_default=Standard -edit_anongid=Behandle ubetrodde grupper som -edit_sync=Synk. alle skrivinger øyeblikketlig? -edit_sync1=Ja -edit_sync2=Nei -edit_sync0=Standard -edit_in=i - -save_err=Kunne ikke lagre eksport -save_edir=Katalogen '$1' finnes ikke -save_enetgroup=Ugyldig eller manglende nettgruppe -save_enetwork='$1' er ikke et gyldig nettverk -save_enetmask='$1' er ikke en gyldig nettmaske -save_eaddress='$1' er ikke en gyldig IPv6 adresse -save_eprefix='$1' er ikke et gyldig IPv6 prefiks -save_ehost='$1' er ikke et gyldig vertsnavn -save_euids=UIDer som ikke skal betros må være en komma-separert liste med tall eller tallområder -save_egids=GIDer som ikke skal betros må være en komma-separert liste med tall eller tallområder -save_pfs='$1' er allerede eksportert som en katalog -save_create_dir=Kan ikke opprette katalogen '$1' - -exports_webnfs=WebNFS klienter -exports_ngroup=Nettgruppe;nbsp;$1 -exports_net=Nettverk;nbsp;$1 -exports_all=Alle -exports_hosts=Verter;nbsp;$1 -exports_host=Vert;nbsp;$1 -exports_gss=Autentisert nettverk: $1 - -log_modify=Endret NFS eksport $1 -log_modify_l=Endret NFS eksport $1 til $2 -log_delete=Slettet NFS eksport $1 -log_delete_l=Slettet NFS eksport $1 til $2 +log_apply=Tatt i bruk konfigurasjon log_create=Opprettet NFS eksport $1 log_create_l=Opprettet NFS eksport $1 til $2 -log_apply=Tatt i bruk konfigurasjon +log_delete=Slettet NFS eksport $1 log_delete_exports=Slettet $1 NFS eksporter - -alert_no_nfsv4root=Ingen NFSv4 virtuell rot er definert!\n Du må først definere en katalog dom NFSv4 root og så binde noen kataloger under denne roten. - -hostsec_host=Vert valg -hostsec_flavors=Sortert liste over sikkerhetstyper tillatt for denne verten -hostsec_up=Opp -hostsec_down=Ned -hostsec_supported=Støttet -hostsec_enabled=Aktivert +log_delete_l=Slettet NFS eksport $1 til $2 +log_modify=Endret NFS eksport $1 +log_modify_l=Endret NFS eksport $1 til $2 +save_create_dir=Kan ikke opprette katalogen '$1' +save_eaddress='$1' er ikke en gyldig IPv6 adresse +save_edir=Katalogen '$1' finnes ikke +save_egids=GIDer som ikke skal betros må være en komma-separert liste med tall eller tallområder +save_ehost='$1' er ikke et gyldig vertsnavn +save_enetgroup=Ugyldig eller manglende nettgruppe +save_enetmask='$1' er ikke en gyldig nettmaske +save_enetwork='$1' er ikke et gyldig nettverk +save_eprefix='$1' er ikke et gyldig IPv6 prefiks +save_err=Kunne ikke lagre eksport +save_euids=UIDer som ikke skal betros må være en komma-separert liste med tall eller tallområder +save_pfs='$1' er allerede eksportert som en katalog diff --git a/exports-nfs4/lang/pl b/exports-nfs4/lang/pl index 3d4a71e16..f484fb3f0 100644 --- a/exports-nfs4/lang/pl +++ b/exports-nfs4/lang/pl @@ -8,7 +8,6 @@ index_apply=Zastosuj zmiany index_applymsg=Naciśnij ten przycisk, aby zastosować bieżącą konfigurację udostępniania. Spowoduje to dostępność wymienionych powyżej katalogów z ustawionymi opcjami. index_return=udostępniania po NFS index_eprog=Program serwera NFS nie został znaleziony. Prawdopodobnie nie został zainstalowany. - edit_title=Zmień udostępnianie create_title=Udostępnij edit_details=Dane udostępniania @@ -37,7 +36,6 @@ edit_gids=Nie ufaj GID-om edit_anonuid=Traktuj niewiarygodnych użytkowników jako edit_default=Domyślne edit_anongid=Traktuj niewiarygodne grupy jako - save_err=Nie udało sie zachować parametrów udostępniania save_edir=Katalog '$1' nie istnieje save_enetgroup=Niepoprawna lub nie istniejąca grupa sieciowa @@ -46,14 +44,12 @@ save_enetmask='$1' nie jest poprawną maską sieci save_ehost='$1' nie jest poprawną nazwą komputera save_euids=Niewiarygodne UID-y muszą być rozdzieloną przecinkami listą liczb lub zakresów save_egids=Niewiarygodne GID-y muszą być rozdzieloną przecinkami listą liczb lub zakresów - exports_webnfs=Klientów eWebNFS exports_ngroup=Grupy sieciowej $1 exports_net=Sieci $1 exports_all=Wszystkich exports_hosts=Hostów $1 exports_host=Hosta $1 - log_modify=Zmieniono eksport NFS $1 log_modify_l=Zmieniono eksport NFS $1 do $2 log_delete=Zmieniono eksport NFS $1 diff --git a/exports-nfs4/lang/pl.auto b/exports-nfs4/lang/pl.auto deleted file mode 100644 index d0891a5b7..000000000 --- a/exports-nfs4/lang/pl.auto +++ /dev/null @@ -1,43 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) -edit_address=Address -edit_prefix=/ -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_gss=Authenticated network: $1 - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/pt b/exports-nfs4/lang/pt index f4d0ff411..4900b6980 100644 --- a/exports-nfs4/lang/pt +++ b/exports-nfs4/lang/pt @@ -6,7 +6,6 @@ index_add=Adicionar nova exportação index_apply=Aplicar Alterações index_applymsg=Clique neste botão para aplicar a configuração de exportação de ficheiros actual. Desta forma, todos os directórios abaixo listados estarão disponiveis com as opções especificadas. index_return=lista de exportações - edit_title=Editar Exportação create_title=Criar Exportação edit_details=Detalhes da exportação @@ -33,7 +32,6 @@ edit_gids=Não confiar em GIDs edit_anonuid=Tratar utilizadores não fiáveis como edit_default=Predefinido edit_anongid=Tratar grupos não fiáveis como - save_err=Erro ao guardar exportação save_edir=O directório '$1' não existe save_enetgroup=Grupo de rede inválido ou em falta diff --git a/exports-nfs4/lang/pt.auto b/exports-nfs4/lang/pt.auto deleted file mode 100644 index ae81dc33f..000000000 --- a/exports-nfs4/lang/pt.auto +++ /dev/null @@ -1,60 +0,0 @@ -index_inactive=Inactive -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to_detail=(hosts and associated security flavors) -edit_address=Address -edit_prefix=/ -edit_security=Export options -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/pt_BR.auto b/exports-nfs4/lang/pt_BR.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/pt_BR.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/ro.auto b/exports-nfs4/lang/ro.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/ro.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/ru b/exports-nfs4/lang/ru index c79ce63ab..0bd854eba 100644 --- a/exports-nfs4/lang/ru +++ b/exports-nfs4/lang/ru @@ -8,7 +8,6 @@ index_apply=Применить изменения index_applymsg=Нажатие на эту кнопку приведет к применению текущей конфигурации экспортируемых каталогов. Все перечисленные выше каталоги станут доступны в соответствии с указанными для них настройками. index_return=списку каталогов index_eprog=Сервер NFS на вашей системе обнаружен не был. Похоже, не установлен пакет NFS. - edit_title=Изменение каталога create_title=Создание каталога edit_details=Настройка каталога @@ -37,7 +36,6 @@ edit_gids=Не доверять GID edit_anonuid=Считать ненадежных пользователей edit_default=По умолчанию edit_anongid=Считать ненадежные группы - save_err=Не удалось сохранить каталоги save_edir=Каталог '$1' не существует save_enetgroup=Сетевая группа не указана или указана неверно @@ -46,14 +44,12 @@ save_enetmask='$1' не является маской сети save_ehost='$1' не является именем узла save_euids=UID должны быть указаны как числа или диапазоны чисел, перечисленных через запятую save_egids=GID должны быть указаны как числа или диапазоны чисел, перечисленных через запятую - exports_webnfs=Клиентам WebNFS exports_ngroup=Сетевой группе $1 exports_net=Сети $1 exports_all=Всем exports_hosts=Узлам $1 exports_host=Узлу $1 - log_modify=Изменен каталог NFS $1 log_modify_l=Каталог NFS изменен с $1 для $2 log_delete=Удален каталог NFS $1 diff --git a/exports-nfs4/lang/ru.auto b/exports-nfs4/lang/ru.auto deleted file mode 100644 index d0891a5b7..000000000 --- a/exports-nfs4/lang/ru.auto +++ /dev/null @@ -1,43 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) -edit_address=Address -edit_prefix=/ -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_gss=Authenticated network: $1 - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/sk.auto b/exports-nfs4/lang/sk.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/sk.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/sl.auto b/exports-nfs4/lang/sl.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/sl.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/sv b/exports-nfs4/lang/sv index 34c246a7e..188b5e31e 100644 --- a/exports-nfs4/lang/sv +++ b/exports-nfs4/lang/sv @@ -8,7 +8,6 @@ index_apply=Genomför ändringar index_applymsg=Tryck på denna knapp för att använda dessa filexporteringsinställningar. Detta kommer att göra de ovan listade katalogerna tillgängliga med de inställningar du har angivit. index_return=exporteringslista index_eprog=Den exekverbara NFS-serverfilen fanns inte på ditt system. NFS-paketet verkar inte vara installerat. - edit_title=Ändra exportering create_title=Lägg till exportering edit_details=Uppgifter om exportering @@ -37,7 +36,6 @@ edit_gids=Lita inte på GID edit_anonuid=Behandla icke betrodda användare som edit_default=Standard edit_anongid=Behandla icke betrodda grupper som - save_err=Det gick inte att spara exportering save_edir=Katalogen '$1' finns inte save_enetgroup=Nätgruppen finns inte eller är inte en giltig nätgrupp @@ -46,14 +44,12 @@ save_enetmask='$1' är inte en giltig nätmask save_ehost='$1' är inte ett giltigt värdnamn save_euids=Ej betrodda UID:n måste vara en kommaseparerad lista med nummer eller intervall save_egids=Ej betrodda GID:n måste vara en kommaseparerad lista med nummer eller intervall - exports_webnfs=WebNFS-klienter exports_ngroup=Nätgrupp $1 exports_net=Nätverk $1 exports_all=Alla exports_hosts=Datorer $1 exports_host=Dator $1 - log_modify=Ändrade NFS-exportering $1 log_modify_l=Ändrade NFS-exportering $1 till $2 log_delete=Tog bort NFS-exportering $1 diff --git a/exports-nfs4/lang/sv.auto b/exports-nfs4/lang/sv.auto deleted file mode 100644 index d0891a5b7..000000000 --- a/exports-nfs4/lang/sv.auto +++ /dev/null @@ -1,43 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) -edit_address=Address -edit_prefix=/ -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_gss=Authenticated network: $1 - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/th.auto b/exports-nfs4/lang/th.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/th.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/tr b/exports-nfs4/lang/tr index 001999f39..d629e630f 100644 --- a/exports-nfs4/lang/tr +++ b/exports-nfs4/lang/tr @@ -8,7 +8,6 @@ index_apply=Değişiklikleri Uygula index_applymsg=Bu düğmeyi tıklayarak mevcut dosya bağlantı ayarlarını uygulayabilirsiniz. Bu işlem yukarıda listeli bütün dizinleri belirtilen seçeneklere ulaşılabilir yapacaktır. index_return=bağlantı listesi index_eprog=NFS sunucusu çalıştrılabilir dosyası bulunamadı. NFS paketi yüklenmemiş olabilir - edit_title=Bağlantıyı Düzenle create_title=Bağlantı Oluştur edit_details=Bağlantı Ayarları @@ -51,7 +50,6 @@ edit_sync1=$yes edit_sync2=$no edit_sync0=$default (genellikle $no) edit_in=in - save_err=Bağlantının kaydedilmesinde hata oluştu save_edir='$1' dizini mevcut değil save_enetgroup=Eksik ya da geçersiz ağ grubu @@ -62,7 +60,6 @@ save_euids=Güvenilmeyecek UID'ler virgülle ayırılmış ya da bir aralıkta b save_egids=Güvenilmeyecek GID'ler virgülle ayırılmış ya da bir aralıkta belirilmiş olmalıdır save_pfs='$1' zaten dizin olarak paylaştırılmış save_create_dir='$1' dizini oluşturulamıyor - exports_webnfs=WebNFS istemcileri exports_ngroup=Ağ grubu $1 exports_net=Ağ $1 @@ -70,7 +67,6 @@ exports_all=Herkes exports_hosts=Makineler $1 exports_host=Makine $1 exports_gss=Onaylanmış ağ: $1 - log_modify=NFS sunumu $1 değiştirildi log_modify_l=$2'de NFS sunumu $1 değiştirildi log_delete=NFS sunumu $1 silindi diff --git a/exports-nfs4/lang/tr.auto b/exports-nfs4/lang/tr.auto deleted file mode 100644 index 5a10071fd..000000000 --- a/exports-nfs4/lang/tr.auto +++ /dev/null @@ -1,25 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) -edit_subtree_check=Disable subtree checking? -edit_privacy=Privacy (including Integrity) - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/uk b/exports-nfs4/lang/uk index c4932c1bb..92b28fc82 100644 --- a/exports-nfs4/lang/uk +++ b/exports-nfs4/lang/uk @@ -1,63 +1,59 @@ -index_title=Експортовані каталоги NFS -index_dir=Каталог -index_inactive=Відключений -index_to=Доступний для.. -index_none=Жоден з каталогів не експортований. -index_add=Додати каталог для експорту -index_apply=Застосувати зміни -index_applymsg=Натискання на цю кнопку приведе до застосування поточної конфігурації експортованих каталогів. Усі перераховані вище каталоги стануть доступні відповідно до зазначеного для них настроюваннями. -index_return=списку каталогів -index_eprog=Сервер NFS на вашій системі виявлений не був. Схоже, не встановлений пакет NFS. - -edit_title=Зміна каталогу -create_title=Створення каталогу -edit_details=Настроювання каталогу -edit_dir=Експортований каталог -edit_active=Уключити? -edit_to=Доступний для.. -edit_all=Усіх -edit_host=Зазначених вузлів -edit_webnfs=Клієнтів WebNFS -edit_netgroup=Мережної групи -edit_network=Мережі -edit_netmask=Маска мережі -edit_relative=Робити символьні посилання відносними? -edit_insecure=Клієнти повинні бути на захищеному порту? -edit_security=Захист каталогу -edit_mode=Режим доступу -edit_ro=Тільки для читання -edit_noaccess=Заборонити доступу до каталогу? -edit_squash=Довіряти вилученим користувачам -edit_everyone=Усім -edit_except=Усім, крім root -edit_nobody=Нікому -edit_uids=Не довіряти UID -edit_none=Немає -edit_gids=Не довіряти GID -edit_anonuid=Вважати ненадійних користувачів -edit_default=За замовчуванням -edit_anongid=Вважати ненадійні групи - -save_err=Не удалося зберегти каталоги -save_edir=Каталог '$1' не існує -save_enetgroup=Мережна група чи не зазначена зазначена невірно -save_enetwork='$1' не є мережею -save_enetmask='$1' не є маскою мережі -save_ehost='$1' не є ім'ям вузла -save_euids=UID повинні бути зазначені як чи числа діапазони чисел, перерахованих через кому -save_egids=GID повинні бути зазначені як чи числа діапазони чисел, перерахованих через кому - -exports_webnfs=Клієнтам WebNFS -exports_ngroup=Мережний групі $1 -exports_net=Мережі $1 -exports_all=Усім -exports_hosts=Вузлам $1 -exports_host=Вузлу $1 - -log_modify=Змінений каталог NFS $1 -log_modify_l=Каталог NFS змінений з $1 для $2 -log_delete=Вилучений каталог NFS $1 -log_delete_l=Вилучений каталог NFS $1 для $2 -log_create=Створений каталог NFS $1 -log_create_l=Створений каталог NFS $1 для $2 -log_apply=Зміни застосовані +index_title=Експортовані каталоги NFS +index_dir=Каталог +index_inactive=Відключений +index_to=Доступний для.. +index_none=Жоден з каталогів не експортований. +index_add=Додати каталог для експорту +index_apply=Застосувати зміни +index_applymsg=Натискання на цю кнопку приведе до застосування поточної конфігурації експортованих каталогів. Усі перераховані вище каталоги стануть доступні відповідно до зазначеного для них настроюваннями. +index_return=списку каталогів +index_eprog=Сервер NFS на вашій системі виявлений не був. Схоже, не встановлений пакет NFS. +edit_title=Зміна каталогу +create_title=Створення каталогу +edit_details=Настроювання каталогу +edit_dir=Експортований каталог +edit_active=Уключити? +edit_to=Доступний для.. +edit_all=Усіх +edit_host=Зазначених вузлів +edit_webnfs=Клієнтів WebNFS +edit_netgroup=Мережної групи +edit_network=Мережі +edit_netmask=Маска мережі +edit_relative=Робити символьні посилання відносними? +edit_insecure=Клієнти повинні бути на захищеному порту? +edit_security=Захист каталогу +edit_mode=Режим доступу +edit_ro=Тільки для читання +edit_noaccess=Заборонити доступу до каталогу? +edit_squash=Довіряти вилученим користувачам +edit_everyone=Усім +edit_except=Усім, крім root +edit_nobody=Нікому +edit_uids=Не довіряти UID +edit_none=Немає +edit_gids=Не довіряти GID +edit_anonuid=Вважати ненадійних користувачів +edit_default=За замовчуванням +edit_anongid=Вважати ненадійні групи +save_err=Не удалося зберегти каталоги +save_edir=Каталог '$1' не існує +save_enetgroup=Мережна група чи не зазначена зазначена невірно +save_enetwork='$1' не є мережею +save_enetmask='$1' не є маскою мережі +save_ehost='$1' не є ім'ям вузла +save_euids=UID повинні бути зазначені як чи числа діапазони чисел, перерахованих через кому +save_egids=GID повинні бути зазначені як чи числа діапазони чисел, перерахованих через кому +exports_webnfs=Клієнтам WebNFS +exports_ngroup=Мережний групі $1 +exports_net=Мережі $1 +exports_all=Усім +exports_hosts=Вузлам $1 +exports_host=Вузлу $1 +log_modify=Змінений каталог NFS $1 +log_modify_l=Каталог NFS змінений з $1 для $2 +log_delete=Вилучений каталог NFS $1 +log_delete_l=Вилучений каталог NFS $1 для $2 +log_create=Створений каталог NFS $1 +log_create_l=Створений каталог NFS $1 для $2 +log_apply=Зміни застосовані diff --git a/exports-nfs4/lang/uk.auto b/exports-nfs4/lang/uk.auto deleted file mode 100644 index d0891a5b7..000000000 --- a/exports-nfs4/lang/uk.auto +++ /dev/null @@ -1,43 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) -edit_address=Address -edit_prefix=/ -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_gss=Authenticated network: $1 - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/ur.auto b/exports-nfs4/lang/ur.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/ur.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/vi.auto b/exports-nfs4/lang/vi.auto deleted file mode 100644 index 922d1e904..000000000 --- a/exports-nfs4/lang/vi.auto +++ /dev/null @@ -1,102 +0,0 @@ -index_title=NFS Exports -index_dir=Directory -index_inactive=Inactive -index_to=Exported to... -index_none=You are not exporting any directories yet. -index_add=Add a new export. -index_apply=Apply Changes -index_applymsg=Click this button to apply the current file exports configuration. This will make all the directories listed above available with the options specified. -index_return=exports list -index_return_edit=edit exports -index_eprog=The NFS server executable was not found on your system. The NFS package does not appear to be installed. -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_title=Edit Export -create_title=Create Export -edit_details=Export details -edit_dir=Directory to export -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_active=Active? -edit_to=Export to... -edit_to_detail=(hosts and associated security flavors) -edit_all=Everyone -edit_host=Host(s) -edit_webnfs=WebNFS clients -edit_netgroup=NIS Netgroup -edit_network=Network -edit_netmask=Netmask -edit_address=Address -edit_prefix=/ -edit_relative=Make symbolic links relative? -edit_insecure=Clients must be on secure port? -edit_security=Export options -edit_mode=Access mode -edit_ro=Read-only? -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_noaccess=Deny access to directory? -edit_squash=Trust remote users -edit_everyone=Everyone -edit_except=Everyone except root -edit_nobody=Nobody -edit_uids=Don't trust UIDs -edit_none=None -edit_gids=Don't trust GIDs -edit_anonuid=Treat untrusted users as -edit_default=Default -edit_anongid=Treat untrusted groups as -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_err=Failed to save export -save_edir=Directory '$1' does not exist -save_enetgroup=Invalid or missing netgroup -save_enetwork='$1' is not a valid network -save_enetmask='$1' is not a valid netmask -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_ehost='$1' is not a valid hostname -save_euids=UIDs not to trust must be a comma-separated list of numbers or ranges -save_egids=GIDs not to trust must be a comma-separated list of numbers or ranges -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/zh b/exports-nfs4/lang/zh index 08cbfb79c..3ebbc953a 100644 --- a/exports-nfs4/lang/zh +++ b/exports-nfs4/lang/zh @@ -8,7 +8,6 @@ index_apply=应用改变 index_applymsg=按这个按钮使当前的文件输出配置生效。这将使上面列出的所有目录以指定的选项可用。 index_return=输出列表 index_eprog=在您的系统中没发现NFS服务器执行程序。看来没安装NFS包。 - edit_title=编辑输出 create_title=创建输出 edit_details=输出的细节 @@ -37,7 +36,6 @@ edit_gids=不信任组ID edit_anonuid=对待不可信用户的方式 edit_default=默认 edit_anongid=对待不可信组的方式 - save_err=保存输出失败 save_edir=目录'$1' 不存在 save_enetgroup=非法或缺少网络组 @@ -46,14 +44,12 @@ save_enetmask='$1'不是有效的网络掩码 save_ehost='$1'不是有效的主机名 save_euids=不信任的UID必须是一个逗号分隔的数字序列或范围 save_egids=不信任的GID必须是一个逗号分隔的数字序列或范围 - exports_webnfs=WebNFS ；客户 exports_ngroup=Netgroup ；$1 exports_net=Network ；$1 exports_all=每个人 exports_hosts=Hosts ；$1 exports_host=Host ；$1 - log_modify=已更新的 NFS 输出 $1 log_modify_l=已更新到 $2 的 NFS 输出 $1 log_delete=删除 NFS 输出 $1 diff --git a/exports-nfs4/lang/zh.auto b/exports-nfs4/lang/zh.auto deleted file mode 100644 index d0891a5b7..000000000 --- a/exports-nfs4/lang/zh.auto +++ /dev/null @@ -1,43 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) -edit_address=Address -edit_prefix=/ -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_gss=Authenticated network: $1 - -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports-nfs4/lang/zh_TW b/exports-nfs4/lang/zh_TW index 241603abf..502b5ab73 100644 --- a/exports-nfs4/lang/zh_TW +++ b/exports-nfs4/lang/zh_TW @@ -8,7 +8,6 @@ index_apply=套用變更 index_applymsg=按下這個按鈕以套用目前檔案匯出的組態. 這將會使上列的目錄依據指定的選項匯出. index_return=匯出列表 index_eprog=在您的系統上找不到 NFS 伺服器執行檔. NFS 套件似乎尚未安裝. - edit_title=編輯匯出 create_title=建立匯出 edit_details=匯出的詳細資料 @@ -36,7 +35,6 @@ edit_gids=不信任的群組編號 (GID) edit_anonuid=將不信任的使用者當成 edit_default=預設 edit_anongid=將不信任的群組當成 - save_err=儲存匯出失敗 save_edir=目錄 '$1' 不存在 save_enetgroup=錯誤或遺失的網路群組 diff --git a/exports-nfs4/lang/zh_TW.auto b/exports-nfs4/lang/zh_TW.auto deleted file mode 100644 index bc3e96f70..000000000 --- a/exports-nfs4/lang/zh_TW.auto +++ /dev/null @@ -1,57 +0,0 @@ -index_return_edit=edit exports -index_delete=Delete Selected Exports -index_disable=Disable Selected -index_enable=Enable Selected -index_vr=virtual root - -edit_vers=NFS Version -edit_nfs_vers=NFS Version -edit_pfs=NFSv4 Pseudofilesystem to export -edit_ispfs=NFSv4 root -edit_to_detail=(hosts and associated security flavors) -edit_address=Address -edit_prefix=/ -edit_security=Export options -edit_subtree_check=Disable subtree checking? -edit_hide=Hide the filesystem? -edit_auth=(with or without Authentication) -edit_sec=Security level -edit_integrity=Integrity -edit_privacy=Privacy (including Integrity) -edit_v2opts=NFSv2-specific options -edit_sync=Immediately sync all writes? -edit_sync1=Yes -edit_sync2=No -edit_sync0=Default -edit_in=Bind to - -save_eaddress='$1' is not a valid IPv6 address -save_eprefix='$1' is not a valid IPv6 prefix -save_pfs='$1' is already exported as a directory -save_create_dir=Can't create the directory '$1' - -exports_webnfs=WebNFS clients -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_all=Everyone -exports_hosts=Hosts $1 -exports_host=Host $1 -exports_gss=Authenticated network: $1 - -log_modify=Modified NFS export $1 -log_modify_l=Modified NFS export $1 to $2 -log_delete=Deleted NFS export $1 -log_delete_l=Deleted NFS export $1 to $2 -log_create=Created NFS export $1 -log_create_l=Created NFS export $1 to $2 -log_apply=Applied configuration -log_delete_exports=Deleted $1 NFS exports - -alert_no_nfsv4root=No NFSv4 virtual root has been defined!\n You should first define a directory as being the NFSv4 root and then bind some directories under this root. - -hostsec_host=Host selection -hostsec_flavors=Ordered list of security flavors allowed for this host -hostsec_up=Up -hostsec_down=Down -hostsec_supported=Supported -hostsec_enabled=Enabled diff --git a/exports/lang/de b/exports/lang/de index e37e79bee..3d1f2b0f6 100644 --- a/exports/lang/de +++ b/exports/lang/de @@ -1,5 +1,6 @@ index_title=NFS-Exporte index_dir=Verzeichnis +index_inaktiv=Inaktiv index_to=Exportiert nach... index_none=Sie exportieren noch keine Verzeichnisse. index_add=Einen neuen Export hinzufügen. @@ -81,7 +82,11 @@ save_eanonuid=Ungültiger anonymer Zugriffs-Benutzername save_eanongid=Ungültiger Gruppenname für anonymen Zugriff exports_webnfs=WebNFS-Kunden +export_ngroup=Netzgruppe $1 +export_net=Netzwerk $1 exports_all=Alle +export_hosts=Hosts $1 +export_host=Host $1 exports_gss=Authentifiziertes Netzwerk: $1 log_modify=NFS-Export $1 geändert @@ -91,4 +96,4 @@ log_delete_l=NFS-Export $1 bis $2 gelöscht log_create=NFS-Export $1 erstellt log_create_l=NFS-Export $1 bis $2 erstellt log_apply=Konfiguration angewendet -log_delete_exports=$1 NFS-Exporte gelöscht +log_delete_exports=$1 NFS-Exporte gelöscht \ No newline at end of file diff --git a/exports/lang/de.auto b/exports/lang/de.auto deleted file mode 100644 index 62f14f7c9..000000000 --- a/exports/lang/de.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_inactive=Inactive - -exports_ngroup=Netgroup $1 -exports_net=Network $1 -exports_hosts=Hosts $1 -exports_host=Host $1 diff --git a/fail2ban/lang/af.auto b/fail2ban/lang/af.auto index 191e5b636..e9376dcee 100644 --- a/fail2ban/lang/af.auto +++ b/fail2ban/lang/af.auto @@ -87,7 +87,6 @@ jail_title1=Skep tronk jail_title2=Wysig tronk jail_header=Filter die aksie-tronkdetails jail_name=Tronknaam -jail_ports=Ports to block jail_egone=Die tronk bestaan nie meer nie! jail_enabled=Huidiglik geaktiveer? jail_filter=Filter na soeklogboek @@ -105,8 +104,6 @@ jail_ignoreip=IP-adresse om nooit te verbied nie jail_err=Kon nie die tronk opslaan nie jail_eclash=Daar bestaan reeds 'n tronk met dieselfde naam jail_ename=Ontbrekende of ongeldige tronknaam -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Ongeldige soekparameter vir aksie $1 jail_eport=Ongeldige poortnommer vir aksie $1 jail_eactions=Geen aksies gekies nie! @@ -167,36 +164,6 @@ config_socket=Sok vir kommunikasie met die bediener config_err=Kon nie die globale konfigurasie stoor nie config_elogtarget='N Lêer om logboeke te skryf, moet 'n absolute pad wees config_esocket=Soklêer moet 'n absolute pad wees -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Wysig konfiglêers manual_desc=Lêer om te wysig: diff --git a/fail2ban/lang/ar.auto b/fail2ban/lang/ar.auto index 0f85fc2d7..b9257684b 100644 --- a/fail2ban/lang/ar.auto +++ b/fail2ban/lang/ar.auto @@ -87,7 +87,6 @@ jail_title1=إنشاء السجن jail_title2=تحرير السجن jail_header=تصفية تفاصيل السجن العمل jail_name=اسم السجن -jail_ports=Ports to block jail_egone=السجن لم يعد موجودا! jail_enabled=تمكين حاليا؟ jail_filter=تصفية للبحث عن سجل @@ -105,8 +104,6 @@ jail_ignoreip=عناوين IP للحظر أبدا jail_err=فشل في حفظ السجن jail_eclash=يوجد بالفعل سجن بنفس الاسم jail_ename=اسم السجن مفقود أو غير صالح -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=معلمة اسم البحث غير صالحة للعمل$1 jail_eport=رقم منفذ غير صالح للعمل$1 jail_eactions=لا توجد إجراءات محددة! @@ -167,36 +164,6 @@ config_socket=المقبس للتواصل مع الخادم config_err=فشل في حفظ التكوين العام config_elogtarget=يجب أن يكون الملف المراد كتابة السجلات إليه مسارًا مطلقًا config_esocket=يجب أن يكون ملف المقبس مسارًا مطلقًا -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=تحرير ملفات التكوين manual_desc=ملف للتحرير: diff --git a/fail2ban/lang/be.auto b/fail2ban/lang/be.auto index eacf09727..6f9b846e0 100644 --- a/fail2ban/lang/be.auto +++ b/fail2ban/lang/be.auto @@ -87,7 +87,6 @@ jail_title1=Стварыць турму jail_title2=Рэдагаваць турму jail_header=Фільтруйце дадзеныя турмы jail_name=Імя турмы -jail_ports=Ports to block jail_egone=Турма больш не існуе! jail_enabled=Цяпер уключаны? jail_filter=Фільтр для пошуку часопіса @@ -105,8 +104,6 @@ jail_ignoreip=IP-адрасы ніколі не забараняюць jail_err=Не ўдалося захаваць турму jail_eclash=Астрог з такой назвай ужо існуе jail_ename=Адсутнічае альбо несапраўднае імя ў турме -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Няправільны параметр імя шукае дзеянне $1 jail_eport=Няправільны нумар порта для дзеяння $1 jail_eactions=Не абрана ніякіх дзеянняў! @@ -167,36 +164,6 @@ config_socket=Разетка для сувязі з серверам config_err=Не атрымалася захаваць глабальную канфігурацыю config_elogtarget=Файл для напісання часопісаў павінен быць абсалютным шляхам config_esocket=Файл сокета павінен быць абсалютным шляхам -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Рэдагаванне канфігурацыі файлаў manual_desc=Файл для рэдагавання: diff --git a/fail2ban/lang/bg.auto b/fail2ban/lang/bg.auto index 5f90d2a4b..fdf941fd3 100644 --- a/fail2ban/lang/bg.auto +++ b/fail2ban/lang/bg.auto @@ -87,7 +87,6 @@ jail_title1=Създайте затвора jail_title2=Редактиране на затвора jail_header=Филтрирайте детайлите на затвора за действие jail_name=Името на затвора -jail_ports=Ports to block jail_egone=Затвора вече не съществува! jail_enabled=В момента е активиран? jail_filter=Филтрирайте, за да търсите журнала за търсене @@ -105,8 +104,6 @@ jail_ignoreip=IP адреси, които никога не забраняват jail_err=Не успя да спаси затвора jail_eclash=Затвор със същото име вече съществува jail_ename=Липсващо или невалидно име на затвора -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Невалиден параметър на търсеното име за действие $1 jail_eport=Невалиден номер на порт за действие $1 jail_eactions=Няма избрани действия! @@ -167,36 +164,6 @@ config_socket=Гнездо за комуникация със сървър config_err=Не можа да се запази глобалната конфигурация config_elogtarget=Файлът за писане на регистрационни файлове трябва да е абсолютен път config_esocket=Сокетният файл трябва да е абсолютен път -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Редактиране на конфигуриране на файлове manual_desc=Файл за редактиране: diff --git a/fail2ban/lang/ca.auto b/fail2ban/lang/ca.auto index 3aff51143..da9005695 100644 --- a/fail2ban/lang/ca.auto +++ b/fail2ban/lang/ca.auto @@ -1,6 +1,3 @@ -jail_ports=Ports to block -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_systemd=systemd jail_pyinotify=piinotificar @@ -8,37 +5,6 @@ log_update_filter=Filtre modificat $1 log_update_action=Acció modificada $1 log_update_jail=Presó modificada $1 -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years - status_title=Estat i accions de les presons status_title3=Blocs de la presó status_return=estat de presons diff --git a/fail2ban/lang/cs.auto b/fail2ban/lang/cs.auto index 8e562cafc..7f505687a 100644 --- a/fail2ban/lang/cs.auto +++ b/fail2ban/lang/cs.auto @@ -87,7 +87,6 @@ jail_title1=Vytvořte vězení jail_title2=Upravit vězení jail_header=Filtrujte podrobnosti o vězení jail_name=Jméno vězení -jail_ports=Ports to block jail_egone=Vězení již neexistuje! jail_enabled=Aktuálně povoleno? jail_filter=Filtr pro vyhledávání v protokolu @@ -105,8 +104,6 @@ jail_ignoreip=IP adresy, které nikdy nezakáží jail_err=Uložení vězení se nepodařilo jail_eclash=Vězení se stejným názvem již existuje jail_ename=Chybějící nebo neplatné jméno vězení -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Neplatný parametr hledajícího názvu pro akci $1 jail_eport=Neplatné číslo portu pro akci $1 jail_eactions=Nebyly vybrány žádné akce! @@ -167,36 +164,6 @@ config_socket=Zásuvka pro komunikaci se serverem config_err=Uložení globální konfigurace se nezdařilo config_elogtarget=Soubor pro zápis protokolů musí být absolutní cestou config_esocket=Soubor soketu musí být absolutní cestou -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Upravit konfigurační soubory manual_desc=Soubor k úpravě: diff --git a/fail2ban/lang/da.auto b/fail2ban/lang/da.auto index fd9f7163e..a1a3992b0 100644 --- a/fail2ban/lang/da.auto +++ b/fail2ban/lang/da.auto @@ -87,7 +87,6 @@ jail_title1=Opret fængsel jail_title2=Rediger fængsel jail_header=Filtrer handlingens fængselsoplysninger jail_name=Fængsel navn -jail_ports=Ports to block jail_egone=Fængsel findes ikke længere! jail_enabled=Aktuelt aktiveret? jail_filter=Filtrer for at søge log @@ -105,8 +104,6 @@ jail_ignoreip=IP-adresser til aldrig at forbyde jail_err=Kunne ikke gemme fængsel jail_eclash=Der findes allerede et fængsel med samme navn jail_ename=Manglende eller ugyldigt fængselsnavn -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Ugyldig navneparameter for handling $1 jail_eport=Ugyldigt portnummer for handling $1 jail_eactions=Ingen handlinger valgt! @@ -167,36 +164,6 @@ config_socket=Socket til kommunikation med serveren config_err=Kunne ikke gemme global konfiguration config_elogtarget=Fil til at skrive logfiler til skal være en absolut sti config_esocket=Socket-fil skal være en absolut sti -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Rediger konfigurationsfiler manual_desc=Fil, der skal redigeres: diff --git a/fail2ban/lang/de b/fail2ban/lang/de index 1a686432c..4b2d3068d 100644 --- a/fail2ban/lang/de +++ b/fail2ban/lang/de @@ -232,4 +232,4 @@ status_err_unban=Kann die IP-Adresse $1 nicht aufheben status_err_unbanjail=Kann das Gefängnis $1 nicht aufheben status_err_unknownjail=Unbekanntes Gefängnis -syslog_logtarget=Fail2Ban Aktionsprotokoll +syslog_logtarget=Fail2Ban Aktionsprotokoll \ No newline at end of file diff --git a/fail2ban/lang/el.auto b/fail2ban/lang/el.auto index 9ba825294..d05ac7ddd 100644 --- a/fail2ban/lang/el.auto +++ b/fail2ban/lang/el.auto @@ -87,7 +87,6 @@ jail_title1=Δημιουργία φυλακής jail_title2=Επεξεργασία φυλακή jail_header=Φιλτράρετε τα στοιχεία της φυλακής jail_name=Όνομα φυλακής -jail_ports=Ports to block jail_egone=Η φυλακή δεν υπάρχει πια! jail_enabled=Αυτή τη στιγμή είναι ενεργοποιημένη; jail_filter=Φιλτράρετε στο αρχείο αναζήτησης για @@ -105,8 +104,6 @@ jail_ignoreip=Οι διευθύνσεις IP να μην απαγορεύοντ jail_err=Αποτυχία αποθήκευσης φυλακής jail_eclash=Μια φυλακή με το ίδιο όνομα υπάρχει ήδη jail_ename=Λείπει ή άκυρο όνομα φυλακής -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Μη έγκυρη παράμετρος όνομα ονόματος για τη δράση $1 jail_eport=Μη έγκυρος αριθμός θύρας για ενέργεια $1 jail_eactions=Δεν έχουν επιλεγεί ενέργειες! @@ -167,36 +164,6 @@ config_socket=Υποδοχή για επικοινωνία με διακομισ config_err=Αποτυχία αποθήκευσης συνολικής διαμόρφωσης config_elogtarget=Το αρχείο για την εγγραφή των αρχείων καταγραφής πρέπει να είναι μια απόλυτη διαδρομή config_esocket=Το αρχείο υποδοχής πρέπει να είναι απόλυτη διαδρομή -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Επεξεργασία αρχείων ρυθμίσεων manual_desc=Αρχείο προς επεξεργασία: diff --git a/fail2ban/lang/es.auto b/fail2ban/lang/es.auto index 0f04703c5..332cf32c5 100644 --- a/fail2ban/lang/es.auto +++ b/fail2ban/lang/es.auto @@ -87,7 +87,6 @@ jail_title1=Crear cárcel jail_title2=Editar cárcel jail_header=Filtrar detalles de la cárcel de acción jail_name=Nombre de la cárcel -jail_ports=Ports to block jail_egone=¡La cárcel ya no existe! jail_enabled=¿Actualmente habilitado? jail_filter=Filtrar para buscar el registro de @@ -105,8 +104,6 @@ jail_ignoreip=Direcciones IP para nunca prohibir jail_err=No se pudo salvar la cárcel jail_eclash=Ya existe una cárcel con el mismo nombre jail_ename=Nombre de la cárcel faltante o inválido -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Parámetro de nombre de aspecto no válido para la acción $1 jail_eport=Número de puerto no válido para la acción $1 jail_eactions=No hay acciones seleccionadas! @@ -167,36 +164,6 @@ config_socket=Enchufe para comunicación con el servidor config_err=Error al guardar la configuración global config_elogtarget=El archivo para escribir registros debe ser una ruta absoluta config_esocket=El archivo de socket debe ser una ruta absoluta -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Editar archivos de configuración manual_desc=Archivo a editar: diff --git a/fail2ban/lang/eu.auto b/fail2ban/lang/eu.auto index 9c8094fac..ffa2b4364 100644 --- a/fail2ban/lang/eu.auto +++ b/fail2ban/lang/eu.auto @@ -87,7 +87,6 @@ jail_title1=Kartzela sortu jail_title2=Kartzela editatu jail_header=Iragazi ekintza kartzelako xehetasunak jail_name=Espetxearen izena -jail_ports=Ports to block jail_egone=Kartzela jada ez dago! jail_enabled=Une honetan gaituta dago? jail_filter=Iragazi bilaketa bilatu erregistroa @@ -105,8 +104,6 @@ jail_ignoreip=IP helbideak inoiz debekatu ez ditzaten jail_err=Huts egin du espetxea gordetzean jail_eclash=Izen bera duen kartzela dagoeneko jail_ename=Espetxearen izen falta edo baliogabea -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=$1 ekintzarako itxuraren izenaren parametro baliogabea jail_eport=$1 ekintzarako portu baliogabea jail_eactions=Ez da ekintzarik aukeratu! @@ -167,36 +164,6 @@ config_socket=Zerbitzariarekin komunikatzeko socket config_err=Huts egin du konfigurazio globala gordetzean config_elogtarget=Erregistroak idazteko fitxategiak bide absolutua izan behar du config_esocket=Socket fitxategiak bide absolutua izan behar du -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Editatu Konfiguratu fitxategiak manual_desc=Editatu beharreko fitxategia: diff --git a/fail2ban/lang/fa.auto b/fail2ban/lang/fa.auto index 25d183f3a..15edaf345 100644 --- a/fail2ban/lang/fa.auto +++ b/fail2ban/lang/fa.auto @@ -87,7 +87,6 @@ jail_title1=زندان را ایجاد کنید jail_title2=زندان را ویرایش کنید jail_header=جزئیات عملکرد زندان را فیلتر کنید jail_name=نام زندان -jail_ports=Ports to block jail_egone=زندان دیگر وجود ندارد! jail_enabled=در حال حاضر فعال شده است؟ jail_filter=فیلتر را برای ورود به سیستم فیلتر کنید @@ -105,8 +104,6 @@ jail_ignoreip=آدرس های IP برای ممنوع کردن هرگز jail_err=نجات زندان نتوانست jail_eclash=یک زندان با همین نام در حال حاضر وجود دارد jail_ename=نام زندان نامشخص است یا نامعتبر است -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=پارامتر نام به دنبال نامعتبر برای عمل$1 است jail_eport=شماره درگاه نامعتبر برای عمل$1 jail_eactions=هیچ عملی انتخاب نشده است! @@ -167,36 +164,6 @@ config_socket=سوکت برای ارتباط با سرور config_err=ذخیره پیکربندی جهانی انجام نشد config_elogtarget=پرونده برای نوشتن سیاههها باید مسیری مطلق باشد config_esocket=پرونده سوکت باید یک مسیر مطلق باشد -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=پیکربندی پرونده ها را ویرایش کنید manual_desc=پرونده برای ویرایش: diff --git a/fail2ban/lang/fi.auto b/fail2ban/lang/fi.auto index 78f6b0b98..dc6233738 100644 --- a/fail2ban/lang/fi.auto +++ b/fail2ban/lang/fi.auto @@ -87,7 +87,6 @@ jail_title1=Luo vankila jail_title2=Muokkaa vankilaa jail_header=Suodata toimintavankilan yksityiskohdat jail_name=Vankilan nimi -jail_ports=Ports to block jail_egone=Vankilaa ei enää ole! jail_enabled=Tällä hetkellä käytössä? jail_filter=Suodata etsiäksesi loki @@ -105,8 +104,6 @@ jail_ignoreip=IP-osoitteet koskaan kieltää jail_err=Vankilan tallentaminen epäonnistui jail_eclash=Saman nimen vankila on jo olemassa jail_ename=Puuttuva tai virheellinen vankilan nimi -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Virheellinen näköinen nimiparametri toiminnolle $1 jail_eport=Virheellinen portin numero toiminnolle $1 jail_eactions=Toimintoja ei valittu! @@ -167,36 +164,6 @@ config_socket=Pistorasia kommunikointiin palvelimen kanssa config_err=Globaalin kokoonpanon tallentaminen epäonnistui config_elogtarget=Lokitiedoston on oltava absoluuttinen polku config_esocket=Socket-tiedoston on oltava absoluuttinen polku -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Muokkaa asetustiedostoja manual_desc=Muokattava tiedosto: diff --git a/fail2ban/lang/fr.auto b/fail2ban/lang/fr.auto index 62791729f..b0c7fb953 100644 --- a/fail2ban/lang/fr.auto +++ b/fail2ban/lang/fr.auto @@ -87,7 +87,6 @@ jail_title1=Créer une prison jail_title2=Modifier la prison jail_header=Filtrer les détails de la prison d'action jail_name=Nom de la prison -jail_ports=Ports to block jail_egone=La prison n'existe plus! jail_enabled=Actuellement activé? jail_filter=Filtre pour rechercher le journal @@ -105,8 +104,6 @@ jail_ignoreip=Adresses IP à ne jamais interdire jail_err=Échec de la sauvegarde de la prison jail_eclash=Une prison du même nom existe déjà jail_ename=Nom de prison manquant ou invalide -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Paramètre de nom de recherche non valide pour l'action $1 jail_eport=Numéro de port non valide pour l'action $1 jail_eactions=Aucune action sélectionnée! @@ -167,36 +164,6 @@ config_socket=Prise pour la communication avec le serveur config_err=Impossible d'enregistrer la configuration globale config_elogtarget=Le fichier dans lequel écrire les journaux doit être un chemin absolu config_esocket=Le fichier de socket doit être un chemin absolu -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Modifier les fichiers de configuration manual_desc=Fichier à éditer: diff --git a/fail2ban/lang/he.auto b/fail2ban/lang/he.auto index 9f4ed4673..af00a9667 100644 --- a/fail2ban/lang/he.auto +++ b/fail2ban/lang/he.auto @@ -87,7 +87,6 @@ jail_title1=צור כלא jail_title2=ערוך את הכלא jail_header=סנן את פרטי כלא הפעולה jail_name=שם בית הסוהר -jail_ports=Ports to block jail_egone=הכלא כבר לא קיים! jail_enabled=כרגע מופעל? jail_filter=סנן לחיפוש יומן @@ -105,8 +104,6 @@ jail_ignoreip=כתובות IP שלא אסור לעולם jail_err=שמירת הכלא נכשלה jail_eclash=כלא עם אותו שם כבר קיים jail_ename=שם כלא חסר או לא תקף -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=פרמטר שם לא חוקי למראה לפעולה $1 jail_eport=מספר יציאה לא חוקי לפעולה $1 jail_eactions=לא נבחרו פעולות! @@ -167,36 +164,6 @@ config_socket=שקע לתקשורת עם השרת config_err=שמירת התצורה הגלובלית נכשלה config_elogtarget=קובץ לכתוב בו יומני חייב להיות נתיב מוחלט config_esocket=קובץ השקע חייב להיות נתיב מוחלט -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=ערוך קבצי תצורה manual_desc=קובץ לעריכה: diff --git a/fail2ban/lang/hr.auto b/fail2ban/lang/hr.auto index e4ef05470..cc0ec7f8c 100644 --- a/fail2ban/lang/hr.auto +++ b/fail2ban/lang/hr.auto @@ -87,7 +87,6 @@ jail_title1=Stvori zatvor jail_title2=Uredi zatvor jail_header=Filtrirajte detalje zatvora o akcijama jail_name=Ime zatvora -jail_ports=Ports to block jail_egone=Zatvor više ne postoji! jail_enabled=Trenutno je omogućeno? jail_filter=Filtrirajte za pretraživanje zapisnika @@ -105,8 +104,6 @@ jail_ignoreip=IP adrese nikada ne zabraniti jail_err=Nije uspjelo spremanje zatvora jail_eclash=Zatvor s istim imenom već postoji jail_ename=Nedostaje ili nevažeće ime zatvora -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Nevažeći parametar naziva traženog za radnju $1 jail_eport=Nevažeći broj priključka za radnju $1 jail_eactions=Nijedna radnja nije odabrana! @@ -167,36 +164,6 @@ config_socket=Utičnica za komunikaciju sa serverom config_err=Spremanje globalne konfiguracije nije uspjelo config_elogtarget=Datoteka za pisanje zapisnika mora biti apsolutni put config_esocket=Datoteka socket mora biti apsolutni put -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Uređivanje datoteka za konfiguriranje manual_desc=Datoteka za uređivanje: diff --git a/fail2ban/lang/hu.auto b/fail2ban/lang/hu.auto index 9befa6dd9..0f14dfce0 100644 --- a/fail2ban/lang/hu.auto +++ b/fail2ban/lang/hu.auto @@ -87,7 +87,6 @@ jail_title1=Létrehozása börtön jail_title2=Jail szerkesztése jail_header=Az akció börtön részleteinek szűrése jail_name=A börtön neve -jail_ports=Ports to block jail_egone=A börtön már nem létezik! jail_enabled=Jelenleg engedélyezve van? jail_filter=Szűrés a keresési naplóba @@ -105,8 +104,6 @@ jail_ignoreip=IP-címek, hogy soha ne tiltsa meg jail_err=A börtön mentése nem sikerült jail_eclash=Az azonos nevű börtön már létezik jail_ename=Hiányzó vagy érvénytelen börtönnév -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Érvénytelen névnév-paraméter a (z) $1 művelethez jail_eport=Érvénytelen portszám a (z) $1 művelethez jail_eactions=Nincs kiválasztva művelet! @@ -167,36 +164,6 @@ config_socket=Aljzat a szerverrel való kommunikációhoz config_err=Nem sikerült menteni a globális konfigurációt config_elogtarget=A naplók írására szolgáló fájlnak abszolút útvonalnak kell lennie config_esocket=A socket fájlnak abszolút útvonalnak kell lennie -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=A Config Files szerkesztése manual_desc=Szerkeszthető fájl: diff --git a/fail2ban/lang/it.auto b/fail2ban/lang/it.auto index 2481b4085..13bbbfd66 100644 --- a/fail2ban/lang/it.auto +++ b/fail2ban/lang/it.auto @@ -87,7 +87,6 @@ jail_title1=Crea una prigione jail_title2=Modifica prigione jail_header=Filtra i dettagli della jail di azione jail_name=Nome della prigione -jail_ports=Ports to block jail_egone=La prigione non esiste più! jail_enabled=Attualmente abilitato? jail_filter=Filtro per cercare log @@ -105,8 +104,6 @@ jail_ignoreip=Indirizzi IP da non vietare mai jail_err=Impossibile salvare il carcere jail_eclash=Esiste già una prigione con lo stesso nome jail_ename=Nome del carcere mancante o non valido -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Parametro del nome dall'aspetto non valido per l'azione $1 jail_eport=Numero porta non valido per l'azione $1 jail_eactions=Nessuna azione selezionata! @@ -167,36 +164,6 @@ config_socket=Presa per la comunicazione con il server config_err=Impossibile salvare la configurazione globale config_elogtarget=Il file in cui scrivere i registri deve essere un percorso assoluto config_esocket=Il file socket deve essere un percorso assoluto -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Modifica file di configurazione manual_desc=File da modificare: diff --git a/fail2ban/lang/ja.auto b/fail2ban/lang/ja.auto index ab35b6aa3..f0fb10634 100644 --- a/fail2ban/lang/ja.auto +++ b/fail2ban/lang/ja.auto @@ -87,7 +87,6 @@ jail_title1=刑務所を作成 jail_title2=刑務所を編集 jail_header=アクション刑務所の詳細をフィルタリングする jail_name=刑務所名 -jail_ports=Ports to block jail_egone=刑務所はもう存在しません！ jail_enabled=現在有効ですか？ jail_filter=検索ログのフィルター @@ -105,8 +104,6 @@ jail_ignoreip=禁止しないIPアドレス jail_err=刑務所を保存できませんでした jail_eclash=同じ名前の刑務所が既に存在します jail_ename=刑務所名の欠落または無効 -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=アクション $1の無効な名前のパラメーター jail_eport=アクション $1のポート番号が無効です jail_eactions=アクションが選択されていません！ @@ -167,36 +164,6 @@ config_socket=サーバーとの通信用ソケット config_err=グローバル構成を保存できませんでした config_elogtarget=ログを書き込むファイルは絶対パスである必要があります config_esocket=ソケットファイルは絶対パスである必要があります -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=構成ファイルの編集 manual_desc=編集するファイル： diff --git a/fail2ban/lang/ko.auto b/fail2ban/lang/ko.auto index c766e0370..a5c35de35 100644 --- a/fail2ban/lang/ko.auto +++ b/fail2ban/lang/ko.auto @@ -87,7 +87,6 @@ jail_title1=감옥 만들기 jail_title2=감옥 편집 jail_header=필터 조치 감옥 세부 사항 jail_name=감옥 이름 -jail_ports=Ports to block jail_egone=감옥은 더 이상 존재하지 않습니다! jail_enabled=현재 활성화되어 있습니까? jail_filter=검색 로그를 필터링 @@ -105,8 +104,6 @@ jail_ignoreip=금지하지 않을 IP 주소 jail_err=감옥을 구하지 못했습니다 jail_eclash=같은 이름의 감옥이 이미 존재합니다 jail_ename=감옥 이름이 없거나 잘못되었습니다 -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=작업 $1 에 대한 잘못된 이름 매개 변수 jail_eport=$1 작업에 잘못된 포트 번호 jail_eactions=선택된 조치가 없습니다! @@ -167,36 +164,6 @@ config_socket=서버와의 통신을위한 소켓 config_err=글로벌 구성을 저장하지 못했습니다 config_elogtarget=로그를 쓸 파일은 절대 경로 여야합니다 config_esocket=소켓 파일은 절대 경로 여야합니다 -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=구성 파일 편집 manual_desc=편집 할 파일 : diff --git a/fail2ban/lang/lt.auto b/fail2ban/lang/lt.auto index 2f7e8c681..8f71c6972 100644 --- a/fail2ban/lang/lt.auto +++ b/fail2ban/lang/lt.auto @@ -87,7 +87,6 @@ jail_title1=Sukurti kalėjimą jail_title2=Redaguoti kalėjimą jail_header=Filtruokite informaciją apie veiksmo kalėjimą jail_name=Kalėjimo vardas -jail_ports=Ports to block jail_egone=Kalėjimo nebėra! jail_enabled=Šiuo metu įjungta? jail_filter=Filtruokite, jei norite ieškoti žurnalo @@ -105,8 +104,6 @@ jail_ignoreip=IP adresai niekada neuždrausti jail_err=Nepavyko išsaugoti kalėjimo jail_eclash=Tuo pačiu pavadinimu kalėjimas jau yra jail_ename=Trūksta arba netinkamas kalėjimo vardas -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Netinkamas ieškomo vardo parametras veiksmui $1 jail_eport=Netinkamas $1 prievado numeris jail_eactions=Nepasirinktas nė vienas veiksmas! @@ -167,36 +164,6 @@ config_socket=Lizdas ryšiui su serveriu config_err=Nepavyko išsaugoti visuotinės konfigūracijos config_elogtarget=Failas, į kurį reikia įrašyti žurnalus, turi būti absoliutus kelias config_esocket=Lizdo failas turi būti absoliutus kelias -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Redaguoti konfigūravimo failus manual_desc=Redaguoti failas: diff --git a/fail2ban/lang/lv.auto b/fail2ban/lang/lv.auto index 9ebb5d647..c8b2ccb95 100644 --- a/fail2ban/lang/lv.auto +++ b/fail2ban/lang/lv.auto @@ -87,7 +87,6 @@ jail_title1=Izveidojiet cietumu jail_title2=Rediģēt cietumu jail_header=Filtrējiet darbības cietuma informāciju jail_name=Cietuma nosaukums -jail_ports=Ports to block jail_egone=Cietuma vairs nav! jail_enabled=Pašlaik iespējots? jail_filter=Filtrējiet, lai meklētu žurnālā @@ -105,8 +104,6 @@ jail_ignoreip=IP adreses, lai nekad neaizliegtu jail_err=Nevarēja saglabāt cietumu jail_eclash=Cietums ar tādu pašu nosaukumu jau pastāv jail_ename=Trūkst vai nav derīgs cietuma nosaukums -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Nederīgs meklējamā nosaukuma parametrs darbībai $1 jail_eport=Nederīgs ostas numurs darbībai $1 jail_eactions=Nav atlasīta neviena darbība. @@ -167,36 +164,6 @@ config_socket=Kontaktligzda saziņai ar serveri config_err=Neizdevās saglabāt globālo konfigurāciju config_elogtarget=Failam, uz kuru jāraksta žurnāli, ir jābūt absolūtam ceļam config_esocket=Socket failam jābūt absolūtam ceļam -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Rediģēt konfigurācijas failus manual_desc=Rediģējamais fails: diff --git a/fail2ban/lang/ms.auto b/fail2ban/lang/ms.auto index b54f6f8a0..e5f82fe9a 100644 --- a/fail2ban/lang/ms.auto +++ b/fail2ban/lang/ms.auto @@ -27,7 +27,6 @@ jail_title1=Buat Penjara jail_title2=Edit Penjara jail_header=Butir penjelasan tindakan penapis jail_name=Nama penjara -jail_ports=Ports to block jail_egone=Penjara tidak lagi wujud! jail_enabled=Pada masa ini didayakan? jail_filter=Tapis untuk mencari log @@ -45,8 +44,6 @@ jail_ignoreip=Alamat IP untuk tidak pernah dilarang jail_err=Gagal menyimpan penjara jail_eclash=Penjara dengan nama yang sama sudah wujud jail_ename=Nama penjara yang hilang atau tidak sah -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Parameter nama tidak sah untuk tindakan $1 jail_eport=Nombor port tidak sah untuk tindakan $1 jail_eactions=Tiada tindakan yang dipilih! @@ -106,36 +103,6 @@ config_socket=Socket untuk komunikasi dengan pelayan config_err=Gagal menyimpan konfigurasi global config_elogtarget=Fail untuk menulis log mesti menjadi laluan mutlak config_esocket=Fail soket mestilah jalan mutlak -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Edit Fail Config manual_desc=Fail untuk diedit: diff --git a/fail2ban/lang/mt.auto b/fail2ban/lang/mt.auto index 0e99401dc..2b8d7ae14 100644 --- a/fail2ban/lang/mt.auto +++ b/fail2ban/lang/mt.auto @@ -87,7 +87,6 @@ jail_title1=Oħloq Ħabs jail_title2=Editja l-Ħabs jail_header=Iffiltra d-dettalji tal-ħabs jail_name=Isem il-ħabs -jail_ports=Ports to block jail_egone=Il-ħabs ma għadux jeżisti! jail_enabled=Attwalment attivat? jail_filter=Iffiltra għal reġistru ta 'tiftix għal @@ -105,8 +104,6 @@ jail_ignoreip=Indirizzi IP li qatt ma jipprojbixxu jail_err=Naqset milli ssalva l-ħabs jail_eclash=Ħabs diġà jeżisti fl-istess isem jail_ename=Isem il-ħabs nieqes jew invalidu -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Parametru tal-isem li qed iħares mhux validu għall-azzjoni $1 jail_eport=Numru tal-port mhux validu għall-azzjoni $1 jail_eactions=L-ebda azzjoni magħżula! @@ -167,36 +164,6 @@ config_socket=Sokit għall-komunikazzjoni mas-server config_err=Ma rnexxielux isalva konfigurazzjoni globali config_elogtarget=Fajl biex tikteb iz-zkuk għandu jkun passaġġ assolut config_esocket=Socket file għandu jkun passaġġ assolut -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Editja l-Iskedi tal-Konfigurazzjoni manual_desc=Fajl li jeditjaw: diff --git a/fail2ban/lang/nl.auto b/fail2ban/lang/nl.auto index 6b1908806..0618aaeae 100644 --- a/fail2ban/lang/nl.auto +++ b/fail2ban/lang/nl.auto @@ -87,7 +87,6 @@ jail_title1=Maak een gevangenis jail_title2=Jail bewerken jail_header=Filter actie details jail_name=Gevangenisnaam -jail_ports=Ports to block jail_egone=Gevangenis bestaat niet meer! jail_enabled=Momenteel ingeschakeld? jail_filter=Filter om log in te zoeken @@ -105,8 +104,6 @@ jail_ignoreip=IP-adressen om nooit te verbannen jail_err=Kan de gevangenis niet opslaan jail_eclash=Er bestaat al een gevangenis met dezelfde naam jail_ename=Ontbrekende of ongeldige gevangenisnaam -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Ongeldig ogende naamparameter voor actie $1 jail_eport=Ongeldig poortnummer voor actie $1 jail_eactions=Geen acties geselecteerd! @@ -167,36 +164,6 @@ config_socket=Aansluiting voor communicatie met server config_err=Kan globale configuratie niet opslaan config_elogtarget=Bestand om logboeken naar te schrijven moet een absoluut pad zijn config_esocket=Socket-bestand moet een absoluut pad zijn -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Configuratiebestanden bewerken manual_desc=Te bewerken bestand: diff --git a/fail2ban/lang/no.auto b/fail2ban/lang/no.auto index 1a0057d26..6941ac724 100644 --- a/fail2ban/lang/no.auto +++ b/fail2ban/lang/no.auto @@ -1,40 +1,6 @@ -jail_ports=Ports to block -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_systemd=systemd jail_pyinotify=pyinotify -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years - status_title=Fengselsstatus og handlinger status_title3=Fengselsblokker status_return=fengselsstatus diff --git a/fail2ban/lang/pl.auto b/fail2ban/lang/pl.auto index c13f4dee5..3b3d1d858 100644 --- a/fail2ban/lang/pl.auto +++ b/fail2ban/lang/pl.auto @@ -1,42 +1,8 @@ index_ver=Wersja 1 -jail_ports=Ports to block -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_systemd=systemowy jail_pyinotify=pyinotify -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years - status_title=Status i działania w więzieniach status_title3=Bloki więzienne status_return=stan więzień diff --git a/fail2ban/lang/pt.auto b/fail2ban/lang/pt.auto index 674b753f8..e1c3446d5 100644 --- a/fail2ban/lang/pt.auto +++ b/fail2ban/lang/pt.auto @@ -87,7 +87,6 @@ jail_title1=Criar Cadeia jail_title2=Editar prisão jail_header=Filtrar detalhes da prisão de ação jail_name=Nome da cadeia -jail_ports=Ports to block jail_egone=A cadeia não existe mais! jail_enabled=Ativado atualmente? jail_filter=Filtrar para pesquisar o log @@ -105,8 +104,6 @@ jail_ignoreip=Endereços IP para nunca banir jail_err=Falha ao salvar a prisão jail_eclash=Já existe uma prisão com o mesmo nome jail_ename=Nome de prisão ausente ou inválido -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Parâmetro de nome de aparência inválido para a ação $1 jail_eport=Número de porta inválido para a ação $1 jail_eactions=Nenhuma ação selecionada! @@ -167,36 +164,6 @@ config_socket=Soquete para comunicação com o servidor config_err=Falha ao salvar a configuração global config_elogtarget=O arquivo no qual gravar logs deve ser um caminho absoluto config_esocket=O arquivo de soquete deve ser um caminho absoluto -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Editar arquivos de configuração manual_desc=Arquivo para editar: diff --git a/fail2ban/lang/pt_BR.auto b/fail2ban/lang/pt_BR.auto index 674b753f8..e1c3446d5 100644 --- a/fail2ban/lang/pt_BR.auto +++ b/fail2ban/lang/pt_BR.auto @@ -87,7 +87,6 @@ jail_title1=Criar Cadeia jail_title2=Editar prisão jail_header=Filtrar detalhes da prisão de ação jail_name=Nome da cadeia -jail_ports=Ports to block jail_egone=A cadeia não existe mais! jail_enabled=Ativado atualmente? jail_filter=Filtrar para pesquisar o log @@ -105,8 +104,6 @@ jail_ignoreip=Endereços IP para nunca banir jail_err=Falha ao salvar a prisão jail_eclash=Já existe uma prisão com o mesmo nome jail_ename=Nome de prisão ausente ou inválido -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Parâmetro de nome de aparência inválido para a ação $1 jail_eport=Número de porta inválido para a ação $1 jail_eactions=Nenhuma ação selecionada! @@ -167,36 +164,6 @@ config_socket=Soquete para comunicação com o servidor config_err=Falha ao salvar a configuração global config_elogtarget=O arquivo no qual gravar logs deve ser um caminho absoluto config_esocket=O arquivo de soquete deve ser um caminho absoluto -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Editar arquivos de configuração manual_desc=Arquivo para editar: diff --git a/fail2ban/lang/ro.auto b/fail2ban/lang/ro.auto index d08199a10..03866d43a 100644 --- a/fail2ban/lang/ro.auto +++ b/fail2ban/lang/ro.auto @@ -87,7 +87,6 @@ jail_title1=Creați temnița jail_title2=Editează închisoarea jail_header=Filtru detalii despre închisoare jail_name=Numele închisorii -jail_ports=Ports to block jail_egone=Închisoarea nu mai există! jail_enabled=În prezent este activat? jail_filter=Filtrați pentru jurnalul de căutare @@ -105,8 +104,6 @@ jail_ignoreip=Adresele IP pentru a nu interzice niciodată jail_err=Nu a reușit să salveze închisoarea jail_eclash=Există deja o închisoare cu același nume jail_ename=Lipsesc sau nevalide numele închisorii -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Parametru pentru numele de căutare nevalid pentru acțiunea $1 jail_eport=Număr de port nevalid pentru acțiunea $1 jail_eactions=Nu sunt selectate acțiuni! @@ -167,36 +164,6 @@ config_socket=Socket pentru comunicare cu serverul config_err=Nu a reușit să salveze configurația globală config_elogtarget=Fișierul pentru a scrie jurnalele trebuie să fie o cale absolută config_esocket=Fișierul socket trebuie să fie o cale absolută -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Editați fișierele de configurare manual_desc=Fișier de editat: diff --git a/fail2ban/lang/ru.auto b/fail2ban/lang/ru.auto index e88b790a6..e6ac0cb88 100644 --- a/fail2ban/lang/ru.auto +++ b/fail2ban/lang/ru.auto @@ -71,7 +71,6 @@ jail_title1=Создать джейл jail_title2=Редактировать тюрьму jail_header=Фильтр действий тюрьмы jail_name=Тюремное имя -jail_ports=Ports to block jail_egone=Тюрьма больше не существует! jail_enabled=В настоящее время включен? jail_filter=Фильтр для поиска в журнале @@ -89,8 +88,6 @@ jail_ignoreip=IP-адреса никогда не забанят jail_err=Не удалось сохранить тюрьму jail_eclash=Тюрьма с таким именем уже существует jail_ename=Отсутствует или неверное имя тюрьмы -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Недопустимый параметр имени для действия $1 jail_eport=Неверный номер порта для действия $1 jail_eactions=Никаких действий не выбрано! @@ -151,36 +148,6 @@ config_socket=Разъем для связи с сервером config_err=Не удалось сохранить глобальную конфигурацию config_elogtarget=Файл для записи логов должен быть абсолютным путем config_esocket=Файл сокета должен быть абсолютным путем -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Редактировать файлы конфигурации manual_desc=Файл для редактирования: diff --git a/fail2ban/lang/sk.auto b/fail2ban/lang/sk.auto index d124489c8..d541f8217 100644 --- a/fail2ban/lang/sk.auto +++ b/fail2ban/lang/sk.auto @@ -87,7 +87,6 @@ jail_title1=Vytvorte väzenie jail_title2=Upraviť väzenie jail_header=Filtrujte podrobnosti väzenia jail_name=Názov väzenia -jail_ports=Ports to block jail_egone=Väzenie už neexistuje! jail_enabled=Je momentálne povolená? jail_filter=Filter vyhľadá protokol @@ -105,8 +104,6 @@ jail_ignoreip=IP adresy, ktoré nikdy nezakážu jail_err=Uloženie väzenia zlyhalo jail_eclash=Väzba s rovnakým menom už existuje jail_ename=Chýbajúce alebo neplatné meno väzenia -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Neplatný parameter hľadaného názvu pre akciu $1 jail_eport=Neplatné číslo portu pre akciu $1 jail_eactions=Nie sú vybrané žiadne akcie! @@ -167,36 +164,6 @@ config_socket=Socket pre komunikáciu so serverom config_err=Globálnu konfiguráciu sa nepodarilo uložiť config_elogtarget=Súbor, do ktorého sa zapisujú protokoly, musí byť absolútnou cestou config_esocket=Súbor soketu musí byť absolútnou cestou -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Upraviť konfiguračné súbory manual_desc=Súbor na úpravu: diff --git a/fail2ban/lang/sl.auto b/fail2ban/lang/sl.auto index dc47d5799..440612769 100644 --- a/fail2ban/lang/sl.auto +++ b/fail2ban/lang/sl.auto @@ -87,7 +87,6 @@ jail_title1=Ustvari zapor jail_title2=Uredite zapor jail_header=Filtrirajte podrobnosti o zaporu jail_name=Ime zapora -jail_ports=Ports to block jail_egone=Zapora ne obstaja več! jail_enabled=Trenutno omogočeno? jail_filter=Filtrirajte, če želite iskati dnevnik @@ -105,8 +104,6 @@ jail_ignoreip=IP naslovi, ki jih nikoli ne prepovejo jail_err=Zapora ni bilo mogoče rešiti jail_eclash=Zapor z istim imenom že obstaja jail_ename=Manjkajoče ali neveljavno ime zapora -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Neveljaven parameter imena za dejanje $1 jail_eport=Neveljavna številka vrat za dejanje $1 jail_eactions=Ni izbranih nobenih dejanj! @@ -167,36 +164,6 @@ config_socket=Vtičnica za komunikacijo s strežnikom config_err=Globalne konfiguracije ni bilo mogoče shraniti config_elogtarget=Datoteka za pisanje dnevnikov mora biti absolutna pot config_esocket=Datoteka vtičnic mora biti absolutna pot -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Uredi konfiguriranje datotek manual_desc=Datoteka za urejanje: diff --git a/fail2ban/lang/sv.auto b/fail2ban/lang/sv.auto index bd139ade3..8faa93e82 100644 --- a/fail2ban/lang/sv.auto +++ b/fail2ban/lang/sv.auto @@ -87,7 +87,6 @@ jail_title1=Skapa fängelse jail_title2=Redigera fängelse jail_header=Filtrera åtgärdsfängelsedetaljer jail_name=Fängelsens namn -jail_ports=Ports to block jail_egone=Fängelse finns inte längre! jail_enabled=Aktuellt aktiverat? jail_filter=Filtrera för att söka loggen @@ -105,8 +104,6 @@ jail_ignoreip=IP-adresser att aldrig förbjuda jail_err=Det gick inte att spara fängelse jail_eclash=Ett fängelse med samma namn finns redan jail_ename=Saknas eller ogiltigt fängelsnamn -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Ogiltig tittarnamnsparameter för åtgärd $1 jail_eport=Ogiltigt portnummer för åtgärd $1 jail_eactions=Inga åtgärder har valts! @@ -167,36 +164,6 @@ config_socket=Uttag för kommunikation med server config_err=Det gick inte att spara global konfiguration config_elogtarget=Fil för att skriva loggar till måste vara en absolut väg config_esocket=Socket-filen måste vara en absolut väg -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Redigera konfigurationsfiler manual_desc=Fil för att redigera: diff --git a/fail2ban/lang/th.auto b/fail2ban/lang/th.auto index 62fbfa250..6db8681b7 100644 --- a/fail2ban/lang/th.auto +++ b/fail2ban/lang/th.auto @@ -87,7 +87,6 @@ jail_title1=สร้างคุก jail_title2=แก้ไขคุก jail_header=กรองรายละเอียดคุกแอ็คชั่น jail_name=ชื่อคุก -jail_ports=Ports to block jail_egone=ไม่มีคุกอีกต่อไป! jail_enabled=เปิดใช้งานปัจจุบันหรือไม่ jail_filter=กรองเพื่อค้นหาบันทึก @@ -105,8 +104,6 @@ jail_ignoreip=ที่อยู่ IP ที่ไม่เคยห้าม jail_err=ไม่สามารถบันทึกคุกได้ jail_eclash=มีคุกที่ชื่อเดียวกันนี้อยู่แล้ว jail_ename=ชื่อคุกหายไปหรือไม่ถูกต้อง -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=พารามิเตอร์ชื่อที่ดูไม่ถูกต้องสำหรับการทำงาน $1 jail_eport=หมายเลขพอร์ตไม่ถูกต้องสำหรับการดำเนินการ $1 jail_eactions=ไม่ได้เลือกการกระทำ! @@ -167,36 +164,6 @@ config_socket=ซ็อกเก็ตสำหรับการสื่อส config_err=ไม่สามารถบันทึกการกำหนดค่าส่วนกลาง config_elogtarget=ไฟล์ที่จะเขียนบันทึกจะต้องเป็นเส้นทางที่แน่นอน config_esocket=ไฟล์ Socket ต้องเป็นพา ธ สัมบูรณ์ -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=แก้ไขไฟล์กำหนดค่า manual_desc=ไฟล์ที่จะแก้ไข: diff --git a/fail2ban/lang/tr.auto b/fail2ban/lang/tr.auto index a6603a4c9..34c7c1d2e 100644 --- a/fail2ban/lang/tr.auto +++ b/fail2ban/lang/tr.auto @@ -87,7 +87,6 @@ jail_title1=Hapis Yarat jail_title2=Hapishaneyi Düzenle jail_header=Eylem hapishane ayrıntılarını filtrele jail_name=Hapishane adı -jail_ports=Ports to block jail_egone=Hapishane artık yok! jail_enabled=Şu anda etkin mi? jail_filter=Arama günlüğüne göre filtrele @@ -105,8 +104,6 @@ jail_ignoreip=Asla yasaklanmayacak IP adresleri jail_err=Hapishane kaydedilemedi jail_eclash=Aynı ada sahip bir hapishane zaten var jail_ename=Eksik veya geçersiz hapishane adı -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=$1 işlemi için geçersiz görünümlü ad parametresi jail_eport=$1 işlemi için geçersiz bağlantı noktası numarası jail_eactions=Hiçbir eylem seçilmedi! @@ -167,36 +164,6 @@ config_socket=Sunucu ile iletişim için soket config_err=Genel yapılandırma kaydedilemedi config_elogtarget=Günlükleri yazılacak dosya mutlak bir yol olmalıdır config_esocket=Soket dosyası mutlak bir yol olmalıdır -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Yapılandırma Dosyalarını Düzenle manual_desc=Düzenlenecek dosya: diff --git a/fail2ban/lang/uk.auto b/fail2ban/lang/uk.auto index 256d47220..7efd5d590 100644 --- a/fail2ban/lang/uk.auto +++ b/fail2ban/lang/uk.auto @@ -87,7 +87,6 @@ jail_title1=Створити в'язницю jail_title2=Редагувати в'язницю jail_header=Фільтруйте деталі в'язниці jail_name=Ім'я тюрми -jail_ports=Ports to block jail_egone=В'язниці вже не існує! jail_enabled=На даний момент увімкнено? jail_filter=Фільтр для пошуку журналу @@ -105,8 +104,6 @@ jail_ignoreip=IP-адреси ніколи не забороняють jail_err=Не вдалося зберегти в'язницю jail_eclash=В'язниця з такою ж назвою вже існує jail_ename=Відсутнє або недійсне ім’я в'язниці -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Недійсний параметр назви для дії $1 jail_eport=Недійсний номер порту для дії $1 jail_eactions=Жодних дій не вибрано! @@ -167,36 +164,6 @@ config_socket=Розетка для зв'язку з сервером config_err=Не вдалося зберегти глобальну конфігурацію config_elogtarget=Файл для запису журналів повинен бути абсолютним шляхом config_esocket=Файл сокета повинен бути абсолютним шляхом -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Редагування конфігураційних файлів manual_desc=Файл для редагування: diff --git a/fail2ban/lang/ur.auto b/fail2ban/lang/ur.auto index a2467b7c6..45559d866 100644 --- a/fail2ban/lang/ur.auto +++ b/fail2ban/lang/ur.auto @@ -87,7 +87,6 @@ jail_title1=جیل بنائیں jail_title2=جیل میں ترمیم کریں jail_header=فلٹر ایکشن جیل کی تفصیلات jail_name=جیل کا نام -jail_ports=Ports to block jail_egone=جیل اب موجود نہیں! jail_enabled=فی الحال فعال؟ jail_filter=تلاش کے لئے فلٹر کریں @@ -105,8 +104,6 @@ jail_ignoreip=کبھی نہیں پابندی کے IP پتوں jail_err=جیل بچانے میں ناکام jail_eclash=اسی نام والی جیل پہلے ہی موجود ہے jail_ename=لاپتہ یا جیل کا غلط نام -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=کارروائی کیلئے$1 کا نام نامناسب پیرامیٹر jail_eport=کارروائی $1 کیلئے پورٹ کا غلط نمبر jail_eactions=کوئی عمل منتخب نہیں! @@ -167,36 +164,6 @@ config_socket=سرور کے ساتھ مواصلت کے لئے ساکٹ config_err=عالمی ترتیب محفوظ کرنے میں ناکام config_elogtarget=نوشتہ جات لکھنے کے لئے فائل ایک مطلق راستہ ہونا ضروری ہے config_esocket=ساکٹ فائل ایک مطلق راہ ہونا چاہئے -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=کنفگ فائلوں میں ترمیم کریں manual_desc=ترمیم کرنے کے لئے فائل: diff --git a/fail2ban/lang/vi.auto b/fail2ban/lang/vi.auto index be1748337..070d95efd 100644 --- a/fail2ban/lang/vi.auto +++ b/fail2ban/lang/vi.auto @@ -87,7 +87,6 @@ jail_title1=Tạo tù jail_title2=Chỉnh sửa tù jail_header=Lọc chi tiết nhà tù hành động jail_name=Tên tù -jail_ports=Ports to block jail_egone=Nhà tù không còn tồn tại! jail_enabled=Hiện đang kích hoạt? jail_filter=Bộ lọc để tìm kiếm nhật ký cho @@ -105,8 +104,6 @@ jail_ignoreip=Địa chỉ IP không bao giờ cấm jail_err=Không thể cứu tù jail_eclash=Một nhà tù có cùng tên đã tồn tại jail_ename=Tên tù thiếu hoặc không hợp lệ -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=Tham số tên tìm kiếm không hợp lệ cho hành động $1 jail_eport=Số cổng không hợp lệ cho hành động $1 jail_eactions=Không có hành động nào được chọn! @@ -167,36 +164,6 @@ config_socket=Ổ cắm để liên lạc với máy chủ config_err=Không thể lưu cấu hình toàn cầu config_elogtarget=Tệp để ghi nhật ký phải là một đường dẫn tuyệt đối config_esocket=Tệp ổ cắm phải là một đường dẫn tuyệt đối -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=Chỉnh sửa tập tin cấu hình manual_desc=Tập tin cần chỉnh sửa: diff --git a/fail2ban/lang/zh b/fail2ban/lang/zh index 0122cb121..91bb0ff18 100644 --- a/fail2ban/lang/zh +++ b/fail2ban/lang/zh @@ -233,3 +233,6 @@ status_err_unbanjail=无法解除封禁 $1 jail status_err_unknownjail=未知 jail监狱 syslog_logtarget=Fail2Ban 操作日志 + +__norefs=1 + diff --git a/fail2ban/lang/zh_TW.auto b/fail2ban/lang/zh_TW.auto index 5ab88751b..3d2fae921 100644 --- a/fail2ban/lang/zh_TW.auto +++ b/fail2ban/lang/zh_TW.auto @@ -87,7 +87,6 @@ jail_title1=創建監獄 jail_title2=編輯監獄 jail_header=過濾動作監獄詳細信息 jail_name=監獄名稱 -jail_ports=Ports to block jail_egone=監獄不再存在！ jail_enabled=當前啟用？ jail_filter=篩選以搜索日誌 @@ -105,8 +104,6 @@ jail_ignoreip=永不禁止的IP地址 jail_err=保存監獄失敗 jail_eclash=同名監獄 jail_ename=監獄名稱缺失或無效 -jail_ebackend=Invalid backend name -jail_eports=Invalid port name, number or range; use a single port name, number or a range in the form start:end; to specify multiple ports, separate them with commas jail_eaname=動作 $1的外觀名稱參數無效 jail_eport=動作 $1的端口號無效 jail_eactions=未選擇任何動作！ @@ -167,36 +164,6 @@ config_socket=與服務器通訊的套接字 config_err=保存全局配置失敗 config_elogtarget=要寫入日誌的文件必須是絕對路徑 config_esocket=套接字文件必須是絕對路徑 -config_dbpurgeage=Age at which bans should be purged from the database -config_dbpurgeage_15m=15 minutes -config_dbpurgeage_30m=30 minutes -config_dbpurgeage_1h=1 hour -config_dbpurgeage_6h=6 hours -config_dbpurgeage_12h=12 hours -config_dbpurgeage_1d=1 day -config_dbpurgeage_3d=3 days -config_dbpurgeage_1w=1 week -config_dbpurgeage_2w=2 weeks -config_dbpurgeage_1mo=1 month -config_ewrongunit=Invalid unit $1 for database purge age -config_ewrongtime=Invalid time for database purge age. Time for database purge age must be a number greater than zero -config_dbpurgeagedef=Default -config_dbpurgeagesel=Selected -config_dbpurgeagecus=Custom -config_dbpurgeagecussec=second -config_dbpurgeagecussecs=seconds -config_dbpurgeagecusmin=minute -config_dbpurgeagecusmins=minutes -config_dbpurgeagecushr=hour -config_dbpurgeagecushrs=hours -config_dbpurgeagecusday=day -config_dbpurgeagecusdays=days -config_dbpurgeagecuswk=week -config_dbpurgeagecuswks=weeks -config_dbpurgeagecusmo=month -config_dbpurgeagecusmos=months -config_dbpurgeagecusyr=year -config_dbpurgeagecusyrs=years manual_title=編輯配置文件 manual_desc=修改文件： diff --git a/fdisk/lang/de b/fdisk/lang/de index b42b8ef56..153ddedef 100644 --- a/fdisk/lang/de +++ b/fdisk/lang/de @@ -304,4 +304,4 @@ relabel_table=Format der Partitionstabelle relabel_ok=Löschen und Neu-Beschriften table_msdos=MS-DOS (Standard-Partitionsformat) -table_gpt=GPT (Für 2T oder größere Festplatten) +table_gpt=GPT (Für 2T oder größere Festplatten) \ No newline at end of file diff --git a/file/lang/af.auto b/file/lang/af.auto index d4cdf254e..908a621d1 100644 --- a/file/lang/af.auto +++ b/file/lang/af.auto @@ -3,7 +3,6 @@ index_nojava=Hierdie module vereis dat Java moet funksioneer, maar u blaaier ond index_eremote=Daar is geen Unix-gebruiker wat ooreenstem met die Webmin-aanmelding $1 nie. index_index=Keer terug na Webmin-indeks. switch_euser=Unix-gebruiker bestaan nie! - top_ret=indeks top_down=Save top_preview=voorskou @@ -27,13 +26,11 @@ top_mount=Mount top_search=Vind top_config=config top_efile=Geen lêer gekies nie - right_name=naam right_size=grootte right_user=gebruiker right_group=groep right_date=datum - edit_enormal=Slegs normale lêers kan geredigeer word edit_title=Redigering van $1 edit_title2=Skep lêer @@ -53,7 +50,6 @@ edit_notfound=Die teks $1 is nie gevind nie edit_saveclose=Stoor en maak toe edit_elength=Die lêer is afgekap! edit_textmode=Skakel oor na gewone teks-modus - info_file=lêer info_path=pad: info_type=tik: @@ -90,7 +86,6 @@ info_files=Totale lêers: info_dirs=Totale dopgehou: info_getsize=Kry maat info_esize=Kon nie groottes kry nie : $1 - eacl_eacls=Kon nie ACL's lees nie : $1 eacl_acltype=ACL-tipe eacl_aclname=Dien toe op @@ -109,7 +104,6 @@ eacl_edefmask=Daar kan hoogstens een standaard-masker-ACL-inskrywing wees eacl_title=ACL vir $1 eacl_owner=Lêer eienaar eacl_edefaults=As 'n lêer enige standaard-ACL het, moet dit standaard-gebruiker-, groep- en ander ACL's hê. - acltype_user=gebruiker acltype_group=groep acltype_other=ander @@ -118,7 +112,6 @@ acltype_default_user=Standaardgebruiker acltype_default_group=Verstekgroep acltype_default_other=Standaard ander acltype_default_mask=Verstekmasker - delete_mtitle=Vee veelvuldige lêers uit delete_dtitle=Vee gids uit delete_ftitle=Vee lêer uit @@ -126,13 +119,11 @@ delete_ddesc=Is u seker dat u die gids $1 en al die inhoud daarvan permanent wil delete_fdesc=Is u seker dat u die lêer $1 permanent wil uitvee? delete_mdesc=Is u seker dat u hierdie lêers en kaarte permanent wil verwyder? : delete_efailed=Kon nie $1 : $2 uitvee nie - mkdir_title=Nuwe gids mkdir_dir=Nuwe gids: mkdir_eexists=$1 bestaan reeds mkdir_efailed=Skep gids misluk : $1 mkdir_eaccess=U mag nie '$1' skep nie - link_title=Skep skakel link_from=Skakel vanaf: link_to=Skakel na: @@ -141,7 +132,6 @@ link_efrom=Skakelbron moet 'n absolute pad wees link_efailed=Skakel het misluk : $1 link_efrom2=U mag nie skakel vanaf '$1' nie link_efollow=U mag nie simlinks hê nie - rename_title=Hernoem $1 rename_old=Ou naam: rename_new=Nuwe naam: @@ -151,7 +141,6 @@ rename_eslash=Die nuwe lêernaam $1 bevat 'n / rename_efailed=Hernoem misluk : $1 rename_eold=U mag nie '$1' hernoem nie rename_enew=U mag nie '$1' hernoem nie - file_type0=Gids file_type1=Tekslêer file_type2=Beeldlêer @@ -160,31 +149,26 @@ file_type4=lêer file_type5=Simboliese skakel file_type6=Toestellêer file_type7=pyp - view_enormal=Slegs normale lêers kan besigtig word view_enormal2=Slegs normale lêers kan afgelaai word view_eaccess=U mag nie toegang tot $1 hê nie view_eopen=Kon nie $1 : $2 open nie - view_edir='N Argief kan slegs vir 'n gids geskep word view_ecmd=Die opdrag $1 wat nodig is om 'n argief te skep, is nie geïnstalleer nie view_ecomp=Kon nie argief skep nie : $1 view_earchive=U mag nie argiewe aflaai nie view_earchmax=Die geselekteerde gids is groter as die maksimum toegelaat vir argivering ($1 grepe) view_epathinfo=Die pad bevat ongeldige karakters - paste_ecopy=U moet knip of kopieer voordat u dit plak paste_egone=Gekopieerde lêer $1 bestaan nie meer nie paste_eover=$1 kan nie oorskryf word nie paste_eself=U kan nie 'n lêer oor homself plak nie paste_emfailed=Beweeg misluk : $1 paste_ecfailed=Kopie misluk : $1 - over_title=Lêer bestaan over_msg=Die lêer $1 bestaan reeds. Gebruik die veld hieronder om 'n nuwe lêernaam vir die geplakte lêer in te voer. over_new=Nuwe lêernaam: over_ok=ok - upload_efailed=Kon nie oplaai open nie : $1 upload_title=Laai leêr op upload_file=Lêer om op te laai @@ -201,11 +185,9 @@ upload_elink=Kan nie na 'n simboliese skakel oplaai nie upload_zip=Ontkoppel zip- of TAR-lêer? upload_yes=Ja, verwyder dan upload_user=Laai op as gebruiker - find_eaccess=U mag nie toegang tot $1 hê nie find_eexist=$1 bestaan nie in $2 nie find_edir=$1 is nie 'n gids in $2 nie - cancel=kanselleer close=Naby eopen=Aflaai het misluk : $1 @@ -216,20 +198,15 @@ chmod_elink=symlink misluk : $1 chmod_echown=chown misluk : $1 chmod_echmod=chmod het misluk : $1 chmod_efollow=U mag nie simboliese skakels wysig nie - copy_efrom=U mag nie vanaf '$1' kopieer nie copy_eto=U mag nie na '$1' kopieër nie copy_elink=symlink misluk : $1 - delete_eaccess=U mag nie '$1' uitvee nie delete_eroot=Die gids '$1' is een van diegene waarop u beperk is, en kan dus nie uitgevee word nie - list_eaccess=U mag nie toegang tot hierdie gids hê nie list_edir=Kon nie $1 : $2 lys nie - move_eto=U mag nie na '$1' skuif nie move_afrom=U mag nie '$1' skuif nie - acl_user=Toegang tot lêers op die bediener as gebruiker acl_user_def=Dieselfde as Webmin-aanmelding acl_umask=Umask vir nuwe lêers @@ -275,7 +252,6 @@ acl_noperms=Kan lêertoestemmings verander? acl_nousers=Kan lêerbesit verander? acl_filesystems=Kan die lêerstelsel-bergingspunte gesien word? acl_contents=Laat u die lêerinhoud soek? - share_title=deel share_samba=Windows share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Vertrou nie-wortel share_s2=Vertrou almal share_lro=Lees-alleen share_lrw=Lees skryf - log_create_export=NFS-uitvoer $1 geskep log_modify_export=Gewysigde NFS-uitvoer $1 log_delete_export=NFS-uitvoer $1 is uitgevee @@ -322,7 +297,6 @@ log_move=Lêer $1 na $2 geskuif log_delete=Lêer $1 is uitgevee log_attr=Stel attribute op lêer $1 log_acl=Stel ACL op lêer $1 - search_eaccess=U mag nie hierdie gids deursoek nie search_title=Soek lêers search_ok=Soek nou @@ -351,9 +325,7 @@ search_crit=Soekkriteria search_list=Soek Resultate search_down=Aflaai search_edown=Geen soekresultatelêer om af te laai is gekies nie - facl_eaccess=U mag nie ACL's vir hierdie lêer instel nie - attr_eattrs=Kon nie eienskappe kry nie : $1 attr_efs=Die lêerstelsel $1 ondersteun nie kenmerke nie attr_add=Voeg attribuut by @@ -364,13 +336,11 @@ attr_title=Lêerkenmerke vir $1 attr_create=Voeg attribuut by attr_edit=Wysig kenmerk attr_ename=Kenmerknaam ontbreek - ext_eattrs=Kon nie EXT-kenmerke kry nie : $1 ext_efs=Die lêerstelsel $1 ondersteun nie EXT-attribute nie ext_title=EXT-eienskappe vir $1 ext_header=EXT lêerkenmerke ext_efailed=Kon nie attribute vir $1 : $2 instel nie - eattr_A=Moenie toegangstye opdateer nie eattr_a=Kan slegs byvoeg by lêer eattr_c=Druk data op die skyf saam @@ -379,7 +349,6 @@ eattr_i=Moenie wysiging toelaat nie eattr_s=Nul blokkeer as u dit uitvee eattr_S=Sinkroniseer altyd na skryf eattr_u=Stoor die inhoud vir die verwydering - mount_eaccess=Jy word nie toegelaat om lêerstelsels berg mount_efstab=Geen lêerstelsel bestaan op hierdie bevestigingspunt nie mount_epoint=$1 is nie 'n bevestigingspunt nie @@ -389,22 +358,18 @@ mount_err1=Kon nie $1 : $2 monteer nie mount_err2=Kon nie $1 : $2 verwyder nie mount_title1=Monteer lêerstelsel mount_title2=Onttrek lêerstelsel - zip_err=Kon nie lêer onttrek nie : $1 zip_ecmd=$1 -opdrag ontbreek zip_eunzip=Uitpak misluk : $1 zip_ename=Dit lyk nie of dit 'n zip-, tar- of tar.gz-lêer is nie zip_euntar=Nie-teer misluk : $1 zip_euntar2=Ontkomprimeer en onteer misluk : $1 - ddir_title=Gids aflaai ddir_rusure=Om die inhoud van $1 as 'n argieflêer af te laai, klik op een van die argieftipes hieronder. ddir_zip=zip ddir_tgz=tar.gz ddir_tar=TAR - ebutton=Hierdie funksie is nie beskikbaar nie - preview_etype=Kon nie lêertipe vir $1 uitwerk nie preview_etype2=$1 is nie in 'n ondersteunde prentformaat nie preview_ecmd=Die opdrag $1 wat nodig is om hierdie beeld te skaal, is nie geïnstalleer nie @@ -412,17 +377,14 @@ preview_eimage=Slegs prente kan voorbeskou word preview_title=Voorskou van $1 preview_bad=Kon nie die prent laai om te voorskou nie preview_egd=Kon nie beeld met GD laai nie - html_efailed=Kon nie HTML-redakteur open : $1 html_title=Wysig HTML-lêer html_title2=Skep HTML-lêer html_save=Stoor en maak toe html_err=Kon nie HTML-lêer stoor nie - history_title=Padgeskiedenis history_ok=Gaan na history_button=geskiedenis - extract_etype=Slegs lêers kan onttrek word extract_title=Onttrek saamgeperste lêer extract_rusure=Is u seker dat u die gekomprimeerde lêer wil onttrek : diff --git a/file/lang/ar.auto b/file/lang/ar.auto index ebc5a18cf..dbb8c2c37 100644 --- a/file/lang/ar.auto +++ b/file/lang/ar.auto @@ -3,7 +3,6 @@ index_nojava=تتطلب هذه الوحدة Java لكي تعمل ، ولكن م index_eremote=لا يوجد مستخدم Unix يطابق تسجيل دخول Webmin$1. index_index=ارجع إلى فهرس Webmin. switch_euser=مستخدم يونكس غير موجود! - top_ret=فهرس top_down=حفظ top_preview=معاينة @@ -27,13 +26,11 @@ top_mount=تتعدد top_search=تجد top_config=التكوين top_efile=لم يتم اختيار اي ملف - right_name=اسم right_size=بحجم right_user=المستعمل right_group=مجموعة right_date=تاريخ - edit_enormal=يمكن تحرير الملفات العادية فقط edit_title=تحرير$1 edit_title2=إنشاء ملف @@ -53,7 +50,6 @@ edit_notfound=لم يتم العثور على النص$1 edit_saveclose=حفظ وإغلاق edit_elength=تم اقتطاع الملف! edit_textmode=التبديل إلى وضع النص العادي - info_file=ملف info_path=مسار: info_type=اكتب: @@ -90,7 +86,6 @@ info_files=إجمالي الملفات: info_dirs=مجموع الدلائل: info_getsize=احصل على الحجم info_esize=فشل في الحصول على الأحجام :$1 - eacl_eacls=فشل في قراءة قوائم التحكم في الوصول :$1 eacl_acltype=نوع ACL eacl_aclname=تنطبق على @@ -109,7 +104,6 @@ eacl_edefmask=يمكن أن يكون هناك على الأقل إدخال اف eacl_title=قائمة التحكم بالوصول (ACL) لـ$1 eacl_owner=مالك الملف eacl_edefaults=إذا كان الملف يحتوي على أي قائمة تحكم بالوصول (ACL) افتراضية ، فيجب أن يكون به مستخدم افتراضي ، ومجموعة ، وقوائم ACL أخرى. - acltype_user=المستعمل acltype_group=مجموعة acltype_other=الآخرين @@ -118,7 +112,6 @@ acltype_default_user=المستخدم الافتراضي acltype_default_group=المجموعة الافتراضية acltype_default_other=افتراضي أخرى acltype_default_mask=القناع الافتراضي - delete_mtitle=حذف ملفات متعددة delete_dtitle=حذف الدليل delete_ftitle=حذف ملف @@ -126,13 +119,11 @@ delete_ddesc=هل تريد بالتأكيد حذف الدليل$1 نهائياً delete_fdesc=هل تريد بالتأكيد حذف الملف$1 نهائيًا؟ delete_mdesc=هل تريد فعلًا حذف هذه الملفات والأدلة نهائيًا؟ : delete_efailed=فشل في حذف $1 : $2 - mkdir_title=دليل جديد mkdir_dir=دليل جديد: mkdir_eexists=$1 موجود بالفعل mkdir_efailed=فشل إنشاء الدليل :$1 mkdir_eaccess=غير مسموح لك بإنشاء "$1" - link_title=إنشاء رابط link_from=رابط من: link_to=رابط ل: @@ -141,7 +132,6 @@ link_efrom=يجب أن يكون مصدر الارتباط مسارًا مطلق link_efailed=فشل الارتباط :$1 link_efrom2=غير مسموح لك بالربط من '$1' link_efollow=لا يسمح لك بإنشاء روابط رمزية - rename_title=إعادة تسمية$1 rename_old=اسم قديم: rename_new=اسم جديد: @@ -151,7 +141,6 @@ rename_eslash=يحتوي اسم الملف الجديد$1 على / rename_efailed=فشلت إعادة التسمية :$1 rename_eold=غير مسموح لك بإعادة تسمية "$1" rename_enew=غير مسموح لك بإعادة التسمية إلى "$1" - file_type0=الدليل file_type1=ملف نصي file_type2=ملف صورة @@ -160,31 +149,26 @@ file_type4=ملف file_type5=ارتباط رمزي file_type6=ملف الجهاز file_type7=يضخ - view_enormal=يمكن عرض الملفات العادية فقط view_enormal2=يمكن تنزيل الملفات العادية فقط view_eaccess=غير مسموح لك بالوصول إلى$1 view_eopen=فشل في فتح $1 : $2 - view_edir=لا يمكن إنشاء أرشيف إلا للدليل view_ecmd=لم يتم تثبيت الأمر$1 المطلوب لإنشاء أرشيف view_ecomp=فشل في إنشاء الأرشيف :$1 view_earchive=لا يسمح لك بتحميل الأرشيفات view_earchmax=الدليل المحدد أكبر من الحد الأقصى المسموح به للأرشفة ($1 بايت) view_epathinfo=يحتوي المسار على أحرف غير صالحة - paste_ecopy=يجب القص أو النسخ قبل اللصق paste_egone=الملف المنسوخ$1 لم يعد موجودا paste_eover=لا يمكن الكتابة فوق$1 paste_eself=لا يمكنك لصق ملف على نفسه paste_emfailed=فشل النقل :$1 paste_ecfailed=فشل النسخ :$1 - over_title=الملف موجود over_msg=الملف$1 موجود بالفعل. استخدم الحقل أدناه لإدخال اسم ملف جديد للملف الذي تم لصقه. over_new=اسم ملف جديد: over_ok=حسنا - upload_efailed=فشل فتح التحميل :$1 upload_title=رفع ملف upload_file=ملف للتحميل @@ -201,11 +185,9 @@ upload_elink=لا يمكن التحميل إلى رابط رمزي upload_zip=فك ضغط ملف ZIP أو TAR؟ upload_yes=نعم ، ثم احذف upload_user=تحميل كمستخدم - find_eaccess=غير مسموح لك بالوصول إلى$1 find_eexist=$1 غير موجود في$2 find_edir=$1 ليس دليلاً في$2 - cancel=إلغاء close=قريب eopen=فشل التنزيل :$1 @@ -216,20 +198,15 @@ chmod_elink=فشل symlink :$1 chmod_echown=فشل chown :$1 chmod_echmod=فشل chmod :$1 chmod_efollow=لا يسمح لك بتحرير الروابط الرمزية - copy_efrom=غير مسموح لك بالنسخ من "$1" copy_eto=غير مسموح لك بالنسخ إلى "$1" copy_elink=فشل symlink :$1 - delete_eaccess=غير مسموح لك بحذف "$1" delete_eroot=الدليل '$1' هو واحد من تلك التي تقتصر عليك ، لذا لا يمكن حذفها - list_eaccess=غير مسموح لك بالوصول إلى هذا الدليل list_edir=فشل في سرد $1 : $2 - move_eto=غير مسموح لك بالانتقال إلى "$1" move_afrom=غير مسموح لك بتحريك "$1" - acl_user=الوصول إلى الملفات الموجودة على الخادم كمستخدم acl_user_def=نفس تسجيل دخول Webmin acl_umask=Umask للملفات الجديدة @@ -275,7 +252,6 @@ acl_noperms=يمكن تغيير أذونات الملف؟ acl_nousers=يمكن تغيير ملكية الملف؟ acl_filesystems=يمكن أن ترى نقاط تحميل نظام الملفات؟ acl_contents=السماح بالبحث عن محتويات الملف؟ - share_title=مشاركة share_samba=شبابيك share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=الثقة غير الجذر share_s2=ثق بالجميع share_lro=يقرأ فقط share_lrw=قراءة و كتابة - log_create_export=إنشاء تصدير NFS$1 log_modify_export=تصدير NFS المعدل$1 log_delete_export=تم حذف تصدير NFS$1 @@ -322,7 +297,6 @@ log_move=تم نقل الملف$1 إلى$2 log_delete=الملف المحذوف$1 log_attr=تعيين السمات على الملف$1 log_acl=قم بتعيين ACL على الملف$1 - search_eaccess=لا يسمح لك بالبحث في هذا الدليل search_title=البحث عن الملفات search_ok=ابحث الآن @@ -351,9 +325,7 @@ search_crit=معايير البحث search_list=نتائج البحث search_down=تحميل search_edown=لم يتم تحديد ملف نتيجة بحث لتنزيله - facl_eaccess=غير مسموح لك بتعيين قوائم ACL لهذا الملف - attr_eattrs=فشل في الحصول على السمات :$1 attr_efs=نظام الملفات $1 لا يدعم السمات attr_add=اضف ميزة @@ -364,13 +336,11 @@ attr_title=سمات الملف لـ$1 attr_create=اضف ميزة attr_edit=تحرير السمة attr_ename=اسم السمة مفقود - ext_eattrs=فشل في الحصول على سمات EXT :$1 ext_efs=لا يدعم نظام الملفات $1 سمات EXT ext_title=سمات EXT لـ$1 ext_header=سمات ملف EXT ext_efailed=فشل في تعيين السمات لـ $1 : $2 - eattr_A=لا تقم بتحديث أوقات الوصول eattr_a=يمكن إلحاق ملف فقط eattr_c=ضغط البيانات على القرص @@ -379,7 +349,6 @@ eattr_i=لا تسمح بالتعديل eattr_s=كتل صفرية عند الحذف eattr_S=قم بالمزامنة دائمًا بعد الكتابة eattr_u=حفظ المحتويات لإلغاء الحذف - mount_eaccess=لا يسمح لك بتحميل أنظمة الملفات mount_efstab=لا يوجد نظام ملفات موجود عند نقطة التحميل هذه mount_epoint=$1 ليس نقطة تحميل @@ -389,22 +358,18 @@ mount_err1=فشل تحميل $1 : $2 mount_err2=فشل في إلغاء تحميل $1 : $2 mount_title1=جبل نظام الملفات mount_title2=Un-mount filesystem - zip_err=تعذر استخراج الملف :$1 zip_ecmd=أمر$1 مفقود zip_eunzip=فشل فك الضغط :$1 zip_ename=لا يبدو أنه ملف مضغوط أو tar أو tar.gz zip_euntar=فشل Un-tar :$1 zip_euntar2=فشل فك ضغط وإلغاء القطران :$1 - ddir_title=تنزيل الدليل ddir_rusure=لتنزيل محتويات $1 كملف أرشيف ، انقر فوق أحد أزرار نوع الأرشيف أدناه. ddir_zip=الرمز البريدي ddir_tgz=TAR.GZ ddir_tar=قطران - ebutton=هذه الميزة غير متوفرة - preview_etype=تعذر تحديد نوع الملف لـ$1 preview_etype2=$1 ليس بتنسيق صورة مدعوم preview_ecmd=الأمر$1 المطلوب لقياس هذه الصورة غير مثبت @@ -412,17 +377,14 @@ preview_eimage=يمكن معاينة الصور فقط preview_title=معاينة$1 preview_bad=تعذر تحميل الصورة للمعاينة preview_egd=فشل تحميل الصورة مع GD - html_efailed=فشل في فتح محرر HTML :$1 html_title=تحرير ملف HTML html_title2=إنشاء ملف HTML html_save=احفظ وأغلق html_err=فشل في حفظ ملف HTML - history_title=تاريخ المسار history_ok=اذهب إلى history_button=التاريخ - extract_etype=يمكن استخراج الملفات فقط extract_title=استخراج ملف مضغوط extract_rusure=هل أنت متأكد أنك تريد استخراج الملف المضغوط : diff --git a/file/lang/be.auto b/file/lang/be.auto index a6cdd45f7..1cf04778e 100644 --- a/file/lang/be.auto +++ b/file/lang/be.auto @@ -3,7 +3,6 @@ index_nojava=Гэты модуль патрабуе Java для функцыян index_eremote=Карыстальнік Unix, які адпавядае ўваходу ў сістэму Webmin $1, не існуе. index_index=Вярнуцца да Індэкс Webmin. switch_euser=Карыстальніка Unix не існуе! - top_ret=Індэкс top_down=Захаваць top_preview=Папярэдні прагляд @@ -27,13 +26,11 @@ top_mount=Гара top_search=Знайдзіце top_config=Наладзьце top_efile=Файл не абраны - right_name=Імя right_size=Памер right_user=Карыстальнік right_group=Група right_date=Дата - edit_enormal=Толькі звычайныя файлы могуць рэдагаваць edit_title=Рэдагаванне $1 edit_title2=Стварэнне файла @@ -53,7 +50,6 @@ edit_notfound=Тэкст $1 не знойдзены edit_saveclose=Захаваць і закрыць edit_elength=Файл быў скарочаны! edit_textmode=Пераключыцеся на звычайны тэкставы рэжым - info_file=Файл info_path=Шлях: info_type=Тып: @@ -90,7 +86,6 @@ info_files=Усяго файлаў: info_dirs=Усяго каталогаў: info_getsize=Атрымаць памер info_esize=Не атрымалася атрымаць памеры : $1 - eacl_eacls=Не атрымалася прачытаць ACL : $1 eacl_acltype=Тып ACL eacl_aclname=Звярнуцца да @@ -109,7 +104,6 @@ eacl_edefmask=Там можа быць максімум адна запіс ACL- eacl_title=ACL для $1 eacl_owner=Уладальнік файла eacl_edefaults=Калі ў файле ёсць ACL па змаўчанні, ён павінен мець карыстальніка, групу і іншыя ACL па змаўчанні. - acltype_user=Карыстальнік acltype_group=Група acltype_other=Іншыя @@ -118,7 +112,6 @@ acltype_default_user=Карыстальнік па змаўчанні acltype_default_group=Група па змаўчанні acltype_default_other=Іншыя па змаўчанні acltype_default_mask=Маска па змаўчанні - delete_mtitle=Выдаліць некалькі файлаў delete_dtitle=Выдаліць каталог delete_ftitle=Выдаліць файл @@ -126,13 +119,11 @@ delete_ddesc=Вы ўпэўнены, што хочаце канчаткова в delete_fdesc=Вы ўпэўнены, што хочаце канчаткова выдаліць файл $1 ? delete_mdesc=Вы ўпэўнены, што хочаце канчаткова выдаліць гэтыя файлы і каталогі? : delete_efailed=Не атрымалася выдаліць $1 : $2 - mkdir_title=Новы даведнік mkdir_dir=Новы каталог: mkdir_eexists=$1 ужо існуе mkdir_efailed=Не атрымалася стварыць каталог : $1 mkdir_eaccess=Вам не дазваляецца ствараць "$1" - link_title=Стварыць спасылку link_from=Спасылка ад: link_to=Спасылка на: @@ -141,7 +132,6 @@ link_efrom=Крыніца спасылкі павінна быць абсалю link_efailed=Спасылка не атрымалася : $1 link_efrom2=Вы не маеце права на сувязь з "$1" link_efollow=Вам не дазволена ствараць сімвалічныя спасылкі - rename_title=Перайменаваць $1 rename_old=Старая назва: rename_new=Новае імя: @@ -151,7 +141,6 @@ rename_eslash=Новае імя файла $1 утрымлівае / rename_efailed=Не атрымалася перайменаваць : $1 rename_eold=Вам нельга перайменаваць "$1" rename_enew=Вам нельга перайменаваць у $1 - file_type0=Даведнік file_type1=Тэкставы файл file_type2=Файл выявы @@ -160,31 +149,26 @@ file_type4=Файл file_type5=Сімвалічная сувязь file_type6=Файл прылады file_type7=Труба - view_enormal=Толькі звычайныя файлы могуць праглядацца view_enormal2=Можна загрузіць толькі звычайныя файлы view_eaccess=Вам не дазволена атрымаць доступ да $1 view_eopen=Не атрымалася адкрыць $1 : $2 - view_edir=Архіў можа быць створаны толькі для каталога view_ecmd=Каманда $1, неабходная для стварэння архіва, не ўсталявана view_ecomp=Не атрымалася стварыць архіў : $1 view_earchive=Вам не дазваляецца загружаць архівы view_earchmax=Абраны каталог перавышае максімальна дапушчальнае архіваванне ($1 байт) view_epathinfo=Шлях змяшчае недапушчальныя сімвалы - paste_ecopy=Перад устаўкай неабходна выразаць альбо скапіяваць paste_egone=Скапіраванага файла $1 больш не існуе paste_eover=$1 немагчыма перазапісаць paste_eself=Вы не можаце ўставіць файл праз сябе paste_emfailed=Не атрымалася перанесці : $1 paste_ecfailed=Не атрымалася скапіяваць : $1 - over_title=Файл існуе over_msg=Файл $1 ужо існуе. У поле ніжэй увядзіце новае імя файла для ўстаўленага файла. over_new=Новае імя файла: over_ok=Добра - upload_efailed=Загрузка не атрымалася : $1 upload_title=Загрузіць файл upload_file=Файл для загрузкі @@ -201,11 +185,9 @@ upload_elink=Немагчыма загрузіць сімвалічную спа upload_zip=Распакуйце файл ZIP або TAR? upload_yes=Так, тады выдаліце upload_user=Загрузіць як карыстальнік - find_eaccess=Вам не дазволена атрымаць доступ да $1 find_eexist=$1 не існуе ў $2 find_edir=$1 не з'яўляецца каталогам у $2 - cancel=Адмяніць close=Зачыніць eopen=Не атрымалася загрузіць : $1 @@ -216,20 +198,15 @@ chmod_elink=сімвалічная спасылка не атрымалася : chmod_echown=не ўдалося : $1 chmod_echmod=chmod не атрымаўся : $1 chmod_efollow=Вам не дазволена рэдагаваць сімвалічныя спасылкі - copy_efrom=Вам нельга капіяваць з $1 copy_eto=Вам не дазваляецца капіяваць на "$1" copy_elink=сімвалічная спасылка не атрымалася : $1 - delete_eaccess=Вы не можаце выдаляць "$1" delete_eroot=Каталог "$1" адзін з тых, да якіх вы абмежаваныя, і таму іх нельга выдаліць - list_eaccess=Вам не дазволены доступ да гэтага каталога list_edir=Не атрымалася ў спісе $1 : $2 - move_eto=Вам нельга пераходзіць на "$1" move_afrom=Вам не дазваляецца рухацца "$1" - acl_user=Доступ да файлаў на серверы як карыстальнік acl_user_def=Гэтак жа, як Webmin acl_umask=Умаск для новых файлаў @@ -275,7 +252,6 @@ acl_noperms=Ці можна змяніць дазволы на файлы? acl_nousers=Ці можна змяніць права ўласнасці на файл? acl_filesystems=Можаце ўбачыць кропкі мацавання файлавай сістэмы? acl_contents=Дазволіць пошук змесціва файла? - share_title=Абмен share_samba=Вокны share_nfs=НФС @@ -304,7 +280,6 @@ share_s1=Даверцеся некарэнным share_s2=Давярайце ўсім share_lro=Толькі для чытання share_lrw=Чытаць-пісаць - log_create_export=Створаны экспарт NFS $1 log_modify_export=Мадыфікаваны экспарт NFS $1 log_delete_export=Выдалены экспарт NFS $1 @@ -322,7 +297,6 @@ log_move=Перамешчаны файл $1 да $2 log_delete=Выдалены файл $1 log_attr=Усталяваць атрыбуты ў файл $1 log_acl=Усталюйце ACL у файл $1 - search_eaccess=Вам не дазволена шукаць гэты каталог search_title=Знайдзіце файлы search_ok=Пошук зараз @@ -351,9 +325,7 @@ search_crit=Крытэрыі пошуку search_list=Вынікі пошуку search_down=Спампаваць search_edown=Для абрання не абраны файл вынікаў пошуку - facl_eaccess=Вам нельга ўсталёўваць ACL для гэтага файла - attr_eattrs=Не атрымалася атрыбутаў : $1 attr_efs=Файлавая сістэма $1 не падтрымлівае атрыбуты attr_add=Дадаць атрыбут @@ -364,13 +336,11 @@ attr_title=Атрыбуты файла для $1 attr_create=Дадаць атрыбут attr_edit=Рэдагаваць атрыбут attr_ename=Адсутнічае імя атрыбута - ext_eattrs=Не атрымалася атрымаць атрыбуты EXT : $1 ext_efs=Файлавая сістэма $1 не падтрымлівае атрыбуты EXT ext_title=Атрыбуты EXT для $1 ext_header=Атрыбуты файла EXT ext_efailed=Не атрымалася ўсталяваць атрыбуты для $1 : $2 - eattr_A=Не абнаўляць час доступу eattr_a=Да файла можна толькі дадаць eattr_c=Сціснуць дадзеныя на дыску @@ -379,7 +349,6 @@ eattr_i=Не дапускаць мадыфікацый eattr_s=Нулявыя блокі пры выдаленні eattr_S=Заўсёды сінхранізаваць пасля запісу eattr_u=Захавайце змесціва для адмены значэння - mount_eaccess=Вам не дазваляецца мантаваць файлавыя сістэмы mount_efstab=У гэтай кропцы мацавання не існуе файлавай сістэмы mount_epoint=$1 не з'яўляецца кропкай мацавання @@ -389,22 +358,18 @@ mount_err1=Не атрымалася змантаваць $1 : $2 mount_err2=Не атрымалася выдаліць $1 : $2 mount_title1=Змантаваць файлавую сістэму mount_title2=Не змантаваць файлавую сістэму - zip_err=Немагчыма атрымаць файл : $1 zip_ecmd=Адсутнічае каманда $1 zip_eunzip=Распацаць памылку : $1 zip_ename=Здаецца, не файл zip, tar або tar.gz zip_euntar=Зняцце смалы : $1 zip_euntar2=Зняцце і сцісканне не атрымалася : $1 - ddir_title=Спампаваць каталог ddir_rusure=Каб загрузіць змесціва $1 у якасці архіўнага файла, націсніце на адну з кнопак тыпу архіва ніжэй. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=ТАР - ebutton=Гэтая функцыя недаступная - preview_etype=Не атрымалася выпрацаваць тып файла для $1 preview_etype2=$1 не падтрымліваецца ў фармаце малюнка preview_ecmd=Каманда $1, неабходная для маштабавання гэтага малюнка, не ўсталяваная @@ -412,17 +377,14 @@ preview_eimage=Толькі выявы можна папярэдне прагл preview_title=Папярэдні прагляд $1 preview_bad=Немагчыма загрузіць выяву для папярэдняга прагляду preview_egd=Не атрымалася загрузіць выяву з GD - html_efailed=Не атрымалася адкрыць рэдактар HTML : $1 html_title=Рэдагаваць HTML файл html_title2=Стварыце HTML файл html_save=Захаваць і закрыць html_err=Не атрымалася захаваць файл HTML - history_title=Гісторыя шляху history_ok=Перайдзіце да history_button=Гісторыя - extract_etype=Выдаляюцца толькі файлы extract_title=Выманне сціснутага файла extract_rusure=Вы ўпэўнены, што хочаце здабываць сціснуты файл : diff --git a/file/lang/bg b/file/lang/bg index 8746cbfad..d28dd7201 100644 --- a/file/lang/bg +++ b/file/lang/bg @@ -3,7 +3,6 @@ index_nojava=Този модул използва java, но Вашият бра index_eremote=Няма Unix потребител който да съвпада с Webmin потребителското име $1. index_index=Връщане към менюто на Webmin. switch_euser=Unix потребителя не съществува! - top_ret=Index top_down=Запис top_preview=Предварителен преглед @@ -27,13 +26,11 @@ top_mount=Mount top_search=Търси top_config=Конфигурация top_efile=Не беше избран файл - right_name=Име right_size=Размер right_user=Потребител right_group=Група right_date=Дата - edit_enormal=Само обикновените файлове могат да бъда редактирани edit_title=Редактиране на $1 edit_title2=Създаване на файл @@ -53,7 +50,6 @@ edit_notfound=Текстът $1 не е намерен edit_saveclose=Запиши & Затвори edit_elength=Файлът беше скъсен! edit_textmode=Превключване към режим на прост текст - info_file=Файл info_path=Път: info_type=Тип: @@ -90,7 +86,6 @@ info_files=Общо файлове: info_dirs=Общо директории: info_getsize=Определяне на размер info_esize=Грешка при определянето на размерите : $1 - eacl_eacls=Грешка при четене на ACL : $1 eacl_acltype=ACL Тип eacl_aclname=Приложи на @@ -109,7 +104,6 @@ eacl_edefmask=Може да съществува най-много едно по eacl_title=ACL за $1 eacl_owner=Собственик на файл eacl_edefaults=Ако на файл е задедан подразбиращ се ACL, той трябва да има подразбиращ се потребителски, групов и друг ACL. - acltype_user=Потребител acltype_group=Група acltype_other=Други @@ -118,7 +112,6 @@ acltype_default_user=Подразбиращ се потребител acltype_default_group=Подразбираща се група acltype_default_other=Подразбиращи се други acltype_default_mask=Подразбираща се маска - delete_mtitle=Изтрий няколко файла delete_dtitle=Изтрой директория delete_ftitle=Изтрий файл @@ -126,13 +119,11 @@ delete_ddesc=Сигурни ли сте, че искате да изтриете delete_fdesc=Сигурни ли сте, че искате да изтриете файл $1 ? delete_mdesc=Сигурни ли сте, че искате да изтрие тези файлове и директории? : delete_efailed=Грешка при изтриване на $1 : $2 - mkdir_title=Създаване на директория mkdir_dir=Нова директория: mkdir_eexists=$1 вече съществува mkdir_efailed=Грешка при създаване на директория : $1 mkdir_eaccess=Нямате права за създаване на '$1' - link_title=Създаване на препратка link_from=Препратка за: link_to=Препратка към: @@ -141,7 +132,6 @@ link_efrom=Нямате права за създавате препратка н link_efailed=Грешка : $1 link_efrom2=Нямате права да свързвате към '$1' link_efollow=Нямате права за създаване на препратки - rename_title=Преименуване на $1 rename_old=Старо има: rename_new=Ново име: @@ -151,7 +141,6 @@ rename_eslash=Новото име на файл $1 съдържа '/' rename_efailed=Грешка при преименуване : $1 rename_eold=Нямате права за преименуване на '$1' rename_enew=Невъзможно преименуване в '$1' - file_type0=Директория file_type1=Текстов файл file_type2=Графичен файл @@ -160,31 +149,26 @@ file_type4=Файл file_type5=Препратка file_type6=Устройство file_type7=Pipe - view_enormal=Само обикновенни файлове могат да бъдат разглеждани view_enormal2=Само обикновенни файлове могат да бъдат download-вани view_eaccess=Нямате права за достъп до $1 view_eopen=Грешка при отваряне на $1 : $2 - view_edir=Архив може да бъде създаден само за директория view_ecmd=Командата $1, необходима за създаване на архив, не е инсталирана view_ecomp=Грешка при създаването на архив : $1 view_earchive=Нямате права за сваляне на архиви view_earchmax=Избраната директория е по-голяма от разрешения максимум за архивиране ($1 байта) view_epathinfo=Пътят съдържа невалидни знаци - paste_ecopy=Трябва да сте копирали или отрязали нещо преди да изпълявате "постави" paste_egone=Копираният файл $1 вече не съществува paste_eover=$1 не може да бъде презаписан paste_eself=Не можете да изпълните "постави" върху същият файл paste_emfailed=Грешка при преместване на : $1 paste_ecfailed=Грешка при копиране на : $1 - over_title=Файлът съществува вече over_msg=Файлът $1 съществува вече. Използвайте полето за да въведете ново име на файла. over_new=Ново име: over_ok=Ок - upload_efailed=Грешка при отваряне на upload : $1 upload_title=Upload на файл upload_file=Файл за upload @@ -201,11 +185,9 @@ upload_elink=Не може да бъде качен в символична вр upload_zip=Да разархивира ли ZIP или TAR файл? upload_yes=Да, и после изтрий upload_user=Качи като потребител - find_eaccess=Нямате права за достъп до $1 find_eexist=$1 не съществува в $2 find_edir=$1 не е директория в $2 - cancel=Откажи close=Затвори eopen=Грешка при сваляне : $1 @@ -216,20 +198,15 @@ chmod_elink=Грешка при създаване на препратка : $1 chmod_echown=Грешка при промяна на собственика : $1 chmod_echmod=Грешка при промяна на правата : $1 chmod_efollow=Нямате права за промяна на препратки - copy_efrom=Нямате права да копирате от '$1' copy_eto=Нямате права да копирате на '$1' copy_elink=грешка при създаване на препратка : $1 - delete_eaccess=Нямате права да изтриете '$1' delete_eroot=Директорията '$1' е една от тези, към които сте ограничени, така че не може да бъде изтрита - list_eaccess=Нямате права за достъп до тази директория list_edir=Грешка при показване не $1 : $2 - move_eto=Нямате права да премесвате в '$1' move_afrom=Нямате права да преместите '$1' - acl_user=Достъп до файловете на сървъра като потребител acl_user_def=Същият като Webmin login acl_umask=Umask за новите файлове @@ -275,7 +252,6 @@ acl_noperms=Може да променя права на файлове? acl_nousers=Може да променя собственост върху файлове? acl_filesystems=Може ли да вижда точките на закачване на файлови системи? acl_contents=Позволи търсене в съдържанието на файлове? - share_title=Sharing share_samba=Windows share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Довери не не админстраторите share_s2=Довери се на всички share_lro=Само за четене share_lrw=Четене и запис - log_create_export=Създаден NFS експорт $1 log_modify_export=Модифициран NFS експорт $1 log_delete_export=Изтрит NFS експорт $1 @@ -322,7 +297,6 @@ log_move=Преместен е файл от $1 на $2 log_delete=Изтри файл $1 log_attr=Зададени атрибути на файл $1 log_acl=Зададен ACL на файл $1 - search_eaccess=Нямате права за търсене в тази директория search_title=Търси файл search_ok=Търси @@ -351,9 +325,7 @@ search_crit=Критерии за търсене search_list=Резултати от търсене search_down=Свали search_edown=Не беше избран открит файл за сваляне - facl_eaccess=Нямате права за задаване на ACL ма този файл - attr_eattrs=Грешка при разчитане на атрибутите : $1 attr_efs=Файловата система $1 не поддържа атрибути attr_add=Добави атрибут @@ -364,13 +336,11 @@ attr_title=Файлови атрибути на $1 attr_create=Добави атрибут attr_edit=Промяна на атрибут attr_ename=Липсва име на атрибут - ext_eattrs=Грешка при разчитане на EXT атрибутите : $1 ext_efs=Файловата система $1 не поддържа EXT атрибути ext_title=EXT атрибути на $1 ext_header=EXT файлови атрибути ext_efailed=Гершка при задаване атрибутите на $1 : $2 - eattr_A=Не обновявай последният момент на достъп eattr_a=Може само да бъде добавяно към файла eattr_c=Компресирай данните на диск @@ -379,7 +349,6 @@ eattr_i=Забрави модификации eattr_s=Запълни с нули при изтриване eattr_S=Винаги прави sync след операция за запис eattr_u=Записи съдържанието за да има възможност за връщане на изтрит файл - mount_eaccess=Нямате права за монтиране на файлови системи mount_efstab=Няма намерена файлова състема на посоченият mounth point mount_epoint=$1 е невалиден mount point @@ -389,22 +358,18 @@ mount_err1=Грешка при монтиране $1 : $2 mount_err2=Грешка при размонтиране $1 : $2 mount_title1=Монтирана е файлова система mount_title2=Размонтиране е файлова система - zip_err=Не можа да разархивира файл : $1 zip_ecmd=Липсваща команда $1 zip_eunzip=Грешка при unzip : $1 zip_ename=Изглежда като да не е zip, tar или tar.gz файл zip_euntar=Грешка при un-tar : $1 zip_euntar2=Грешка при разкомпресиране и un-tar : $1 - ddir_title=Сваляне на директория ddir_rusure=За да свалите съдържанието на $1 като архивен файл, натиснете един от бутоните за типове архиви по-долу. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Тази способност не е достъпна - preview_etype=Не можа да определи типа на файл за $1 preview_etype2=$1 не е поддържан формат за изображения preview_ecmd=Командата $1, необходима за променяне на размера на това изображение, не е инсталирана @@ -412,17 +377,14 @@ preview_eimage=Само изображения могат да бъдат пре preview_title=Предварителен преглед на $1 preview_bad=Не можа да зареди изображение за предварителен преглед preview_egd=Грешка при зареждането на изображение в GD - html_efailed=Грешка при отварянето на HTML редактор : $1 html_title=Редактиране на HTML файл html_title2=Създаване на HTML файл html_save=Записване и затваряне html_err=Грешка при записването на HTML файл - history_title=История на пътища history_ok=Отиди на history_button=История - extract_etype=Само файлове могат да бъдат разархивирани extract_title=Разархивиране на компресиран файл extract_rusure=Сигурни ли сте, че искате да разархивиране компресирания файл: diff --git a/file/lang/ca b/file/lang/ca index 287da3290..4d4836998 100644 --- a/file/lang/ca +++ b/file/lang/ca @@ -3,7 +3,6 @@ index_nojava=Aquest mòdul requereix Java per funcionar, però el teu navegador index_eremote=No hi ha cap usuari Unix que coincideixi amb l'entrada $1 de Webmin. index_index=Torna a l'Índex de Webmin. switch_euser=L'usuari Unix no existeix! - top_ret=Índex top_down=Desa top_preview=Previsualitza @@ -27,13 +26,11 @@ top_mount=Munta top_search=Busca top_config=Configura top_efile=No has seleccionat cap fitxer - right_name=Nom right_size=Mida right_user=Usuari right_group=Grup right_date=Data - edit_enormal=Només es poden editar els fitxers normals edit_title=Edició de $1 edit_title2=Creació del fitxer @@ -53,7 +50,6 @@ edit_notfound=El text $1 no s'ha trobat edit_saveclose=Desa & Tanca edit_elength=S'ha escapçat el fitxer! edit_textmode=Canvia a mode de text planer - info_file=Fitxer info_path=Camí: info_type=Tipus: @@ -90,7 +86,6 @@ info_files=Total fitxers: info_dirs=Total directoris: info_getsize=Obtingues la Mida info_esize=No s'han pogut obtenir les mides: $1 - eacl_eacls=No s'han pogut llegir les ACLs: $1 eacl_acltype=Tipus d'ACL eacl_aclname=Aplica a @@ -109,7 +104,6 @@ eacl_edefmask=Hi pot haver com a molt una entrada per defecte de màscara ACL eacl_title=ACL de $1 eacl_owner=Propietari del fitxer eacl_edefaults=Si un fitxer té alguna ACL per defecte, ha de tenir usuari i grup per defecte. - acltype_user=Usuari acltype_group=Grup acltype_other=Altres @@ -118,7 +112,6 @@ acltype_default_user=Usuari per defecte acltype_default_group=Grup per defecte acltype_default_other=Altres per defecte acltype_default_mask=Màscara per defecte - delete_mtitle=Suprimeix fitxers múltiples delete_dtitle=Supressió de directori delete_ftitle=Supressió de fitxer @@ -126,13 +119,11 @@ delete_ddesc=Segur que vols esborrar de forma definitiva el directori $1 i tot e delete_fdesc=Segur que vols esborrar de forma definitiva el fitxer $1? delete_mdesc=Segur que vols suprimir de forma permanent aquests fitxers i directoris? delete_efailed=No s'ha pogut esborrar $1: $2 - mkdir_title=Nou Directori mkdir_dir=Nou directori: mkdir_eexists=$1 ja existeix mkdir_efailed=La creació del director ha fallat: $1 mkdir_eaccess=No tens permís per crear '$1' - link_title=Creació d'enllaç link_from=Enllaça: link_to=A: @@ -141,7 +132,6 @@ link_efrom=L'origen de l'enllaç ha de ser un camí absolut link_efailed=L'enllaç ha fallat: $1 link_efrom2=No tens permís per enllaçar '$1' link_efollow=No tens permís per crear enllaços simbòlics - rename_title=Reanomenament de $1 rename_old=Nom vell: rename_new=Nom nou: @@ -150,7 +140,6 @@ rename_eexists=Ja existeix un fitxer anomenat $1 rename_eslash=El nom de fitxer nou $1 conté una / rename_efailed=El reanomenament ha fallat: $1 rename_enew=No tens permís per reanomenar a '$1' - file_type0=Directori file_type1=Fitxer de text file_type2=Fitxer d'imatge @@ -159,31 +148,26 @@ file_type4=Fitxer file_type5=Enllaç simbòlic file_type6=Fitxer de dispositiu file_type7=Pipe - view_enormal=Només es poden mostrar els fitxers normals view_enormal2=Només es poden descarregar fitxers normals view_eaccess=No tens permís per accedir a $1 view_eopen=No s'ha pogut obrir $1: $2 - view_edir=Un arxiu només es pot crear per a un directori view_ecmd=L'ordre $1 necessària per a crear un arxiu no està instal·lada view_ecomp=No s'ha pogut crear l'arxiu: $1 view_earchive=No tens permís per descarregar arxius view_earchmax=El directori seleccionat és més gran que el màxim permès per arxivar ($1 bytes) view_epathinfo=El camí conté caràcters invàlids - paste_ecopy=Has de copiar o retallar abans d'enganxar paste_egone=El fitxer copiat $1 ja no existeix paste_eover=$1 no es pot reescriure paste_eself=No pots enganxar un fitxer sobre ell mateix paste_emfailed=El desplaçament ha fallat: $1 paste_ecfailed=La copia ha fallat: $1 - over_title=Fitxer Existent over_msg=El fitxer $1 ja existeix. Utilitza el camp inferior per introduir un nom de fitxer nou per al fitxer enganxat. over_new=Nom de fitxer nou: over_ok=Bé - upload_efailed=No s'ha pogut obrir el fitxer per pujar: $1 upload_title=Puja de Fitxer upload_file=Fitxer per pujar @@ -200,11 +184,9 @@ upload_elink=No es pot fer la puja sobre un enllaç simbòlic upload_zip=Descomprimeixo el fitxer ZIP o TAR? upload_yes=Sí, llavors suprimeix-lo upload_user=Puja-ho com a usuari - find_eaccess=No tens permís per accedir $1 find_eexist=$1 no existeix a $2 find_edir=$1 no és un directori de $2 - cancel=Cancel·la close=Tanca eopen=La descàrrega ha fallat: $1 @@ -215,20 +197,15 @@ chmod_elink=enllaç simbòlic fallit: $1 chmod_echown=chown fallit: $1 chmod_echmod=chmod fallit: $1 chmod_efollow=No tens permís per editar els enllaços simbòlics - copy_efrom=No tens permís per copiar de '$1' copy_eto=No tens permís per copiar a '$1' copy_elink=enllaç simbòlic fallit: $1 - delete_eaccess=No tens permís per esborrar '$1' delete_eroot=El directori '$1' és un dels directoris als quals estàs limitat, així que no es pot suprimir - list_eaccess=No tens permís per accedir a aquest directori list_edir=No s'ha pogut llistar $1: $2 - move_eto=No tens permís per desplaçar a '$1' move_afrom=No tens permís per desplaçar '$1' - acl_user=Accedeix els fitxers del servidor com a usuari acl_user_def=Igual que l'usuari Webmin acl_umask=Umask per a fitxers nous @@ -274,7 +251,6 @@ acl_noperms=Pot canviar els permisos dels fitxers acl_nousers=Pot canviar el propietari dels fitxers acl_filesystems=Pot veure els punts de muntatge dels sistemes de fitxers acl_contents=Permet la recerca de continguts de fitxers - share_title=Xarxa share_samba=Windows share_nfs=NFS @@ -303,7 +279,6 @@ share_s1=Refia't de no-root share_s2=Refia't de tothom share_lro=Només lectura share_lrw=Lectura-escriptura - log_create_export=S'ha creat l'exportació NFS $1 log_modify_export=S'ha modificat l'exportació NFS $1 log_delete_export=S'ha suprimit l'exportació NFS $1 @@ -321,7 +296,6 @@ log_move=S'ha desplaçat el fitxer $1 a $2 log_delete=S'ha esborrat el fitxer $1 log_attr=Estableix atributs sobre el fitxer $1 log_acl=Estableix ACL sobre el fitxer $1 - search_eaccess=No tens permís per buscar en aquest directori search_title=Busca Fitxers search_ok=Busca ara @@ -350,9 +324,7 @@ search_crit=Criteris de Recerca search_list=Resultats de la Recerca search_down=Descarrega search_edown=No has seleccionat cap fitxer de resultats de recerca per descarregar - facl_eaccess=No tens permís per establir ACLs per a aquest fitxer - attr_eattrs=No s'han trobat els atributs: $1 attr_efs=El sistema de fitxers $1 no suporta atributs attr_add=Afegeix Atribut @@ -363,13 +335,11 @@ attr_title=Atributs de Fitxer de $1 attr_create=Crea Atribut attr_edit=Edita Atribut attr_ename=Hi falta el nom de l'atribut - ext_eattrs=No s'han pogut obtenir els atributs EXT: $1 ext_efs=El sistema de fitxers $1 no suporta atributs EXT ext_title=Atributs EXT de $1 ext_header=Atributs EXT de fitxer ext_efailed=No s'han pogut establir els atributs de $1: $2 - eattr_A=No actualitzis els temps d'accés eattr_a=Només pot afegir al fitxer eattr_c=Comprimeix les dades del disc @@ -378,7 +348,6 @@ eattr_i=No en permetis la modificació eattr_s=Posa els blocs a zero en suprimir eattr_S=Fes sempre un sync després d'escriure eattr_u=Desa el contingut per a desfer - mount_eaccess=No tens permís per muntar sistemes de fitxers mount_efstab=No hi ha cap sistema de fitxers en aquest punt de muntatge mount_epoint=$1 no és un punt de muntatge @@ -388,22 +357,18 @@ mount_err1=No s'ha pogut muntar $1: $2 mount_err2=No s'ha pogut desmuntar $1: $2 mount_title1=Munta el sistema de fitxers mount_title2=Desmunta el sistema de fitxers - zip_err=No es pot extreure el fitxer: $1 zip_ecmd=Hi falta l'ordre $1 zip_eunzip=La descompressió ZIP ha fallat: $1 zip_ename=No sembla que sigui cap fitxer zip, tar ni tar.gz zip_euntar=El desarxivat TAR ha fallat: $1 zip_euntar2=La descompressió i desarxivat TAR ha fallat: $1 - ddir_title=Descàrrega de Directori ddir_rusure=Per descarregar el contingut de $1 com un fitxer d'arxiu, fes clic sobre una dels botons de tipus d'arxiu de sota. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Aquesta característica no està disponible - preview_etype=No s'ha pogut determinar el tipus de fitxer per a $1 preview_etype2=$1 no és cap format d'imatge suportat preview_ecmd=L'ordre $1 necessària per escalar la imatge no està instal·lada @@ -411,17 +376,14 @@ preview_eimage=Només es poden previsualitzar imatges preview_title=Vista Prèvia de $1 preview_bad=No s'ha pogut carregar la imatge a previsualitzar preview_egd=No s'ha pogut carregar la imatge amb GD - html_efailed=No s'ha pogut obrir l'editor HTML: $1 html_title=Edició de Fitxer HTML html_title2=Creació de Fitxer HTML html_save=Desa i Tanca html_err=No s'ha pogut desar el fitxer HTML - history_title=Historial de Camins history_ok=Vés A history_button=Historial - extract_etype=Només es poden extreure fitxers extract_title=Extracció de Fitxer Comprimit extract_rusure=Segur que vols extreure el fitxer comprimit: diff --git a/file/lang/cs b/file/lang/cs index 9c3507c9c..28e564ae0 100644 --- a/file/lang/cs +++ b/file/lang/cs @@ -3,7 +3,6 @@ index_nojava=Tento soubor vyžaduje funkčnost Javy, avšak váš prohlížeč J index_eremote=Neexistuje žádný Unix uživatel, který by vyhovoval příhlášení ve Webminu $1. index_index=Vrátit se na Úvod Webminu. switch_euser=Unix uživatel neexistuje! - top_ret=Úvodní stránka top_down=Uložit top_preview=Náhled @@ -27,13 +26,11 @@ top_mount=Připojit top_search=Najít top_config=Konfigurovat top_efile=Nebyly vybrány žádné soubory - right_name=Jméno right_size=Velikost right_user=Uživatel right_group=Skupina right_date=Datum - edit_enormal=Mohou být editovány pouze normální soubory edit_title=Editování $1 edit_title2=Vytvoření souboru @@ -53,7 +50,6 @@ edit_notfound=Text $1 nebyl nalezen edit_saveclose=Uložit a zavřít edit_elength=Soubor byl zkomolen! edit_textmode=Přepnout se do textového módu - info_file=Soubor info_path=Cesta: info_type=Typ: @@ -88,7 +84,6 @@ info_files=Celkový počet souborů: info_dirs=Celkový počet adresářů: info_getsize=Zjistit velikost info_esize=Chyba při zjišťování velikosti: $1 - eacl_eacls=Chyba při čtení ACLs : $1 eacl_acltype=ACL typ eacl_aclname=Použít na @@ -107,7 +102,6 @@ eacl_edefmask=Může být uveden nanejvýš jeden zápis výchozí masky pro ACL eacl_title=ACL pro $1 eacl_owner=Vlastník souboru eacl_edefaults=Jestliže má soubor nejaký váchozí ACL, musí mít výchozího uživatele, skupinu a ostatní pro ACLs. - acltype_user=Uživatel acltype_group=Skupina acltype_other=Ostatní @@ -116,7 +110,6 @@ acltype_default_user=Výchozí uživatel acltype_default_group=Výchozí skupna acltype_default_other=Výchozí ostatní acltype_default_mask=Výchozí maska - delete_mtitle=Vícenásobné mmazání souborů delete_dtitle=Smazat adresář delete_ftitle=Smazat soubor @@ -124,13 +117,11 @@ delete_ddesc=Skutečně chcete permanentně mazat adresář $1 a celý jeho obsa delete_fdesc=Skutečně chcete permanentně mazat soubor $1 ? delete_mdesc=Skutečně chcete permanentně mazat tyto soubory a adresáře? : delete_efailed=Chyba při mazání $1 : $2 - mkdir_title=Nový adresář mkdir_dir=Nový adresář: mkdir_eexists=$1 již existuje mkdir_efailed=Chyba při vytváření adresáře : $1 mkdir_eaccess=Nemáte oprávnění vytvářet '$1' - link_title=Vytvoření linku link_from=Link z: link_to=Link na: @@ -139,7 +130,6 @@ link_efrom=Nemáte oprávnění linkovat z '$1' link_efailed=Chyba při linku : $1 link_efrom2=Nemáte oprávnění vytvořit link z '$1' link_efollow=Nemáte oprávnění tytvářet symbolické linky - rename_title=Přejmenování $1 rename_old=Staré jméno: rename_new=Nové jméno: @@ -149,7 +139,6 @@ rename_eslash=Nový název souboru $1 obsahuje / rename_efailed=Chyba při přejmenování : $1 rename_eold=Nemáte oprávnění přejmenovat '$1' rename_enew=Nemáte oprávnění přejmenovat na '$1' - file_type0=Adresář file_type1=Textový soubor file_type2=Image soubor @@ -158,30 +147,25 @@ file_type4=Soubor file_type5=Symbolický link file_type6=Soubor zařízení file_type7=Roura - view_enormal=Mohou být zobrazovány pouze normální soubory view_enormal2=Mohou být stahovány pouze normální soubory view_eaccess=Nemáte oprávnění přístupu k $1 view_eopen=Chyba při otevření $1 : $2 - view_edir=Archiv může být vytvořen pouze pro adresář view_ecmd=Příkaz $1, potřebný pro vytvoření archívu, není nainstalován view_ecomp=Chyba při vytváření archívu : $1 view_earchive=Nemáte oprávnění stahovat archivy view_earchmax=Vybraný adresář je rozsáhlejší než je maximální možná velikost pro archivaci ($1 bytů) - paste_ecopy=Ne ž použijete vložení ze schránky, musíte do ní neco zkopírovat nebo vyjmout paste_egone=Kopírované soubory $1 již neexistují paste_eover=$1 nemůže být přepsán paste_eself=Nemůžete vložit sebe sama paste_emfailed=Chyba při přesunu : $1 paste_ecfailed=Chyba při kopírování : $1 - over_title=Soubor existuje over_msg=Soubor $1 již existuje. Použijte níže uvedené pole pro zapsání nového jména souboru pro vkládaný soubor. over_new=Nové jméno souboru: over_ok=Ok - upload_efailed=Chyba při otevřenínahrávky : $1 upload_title=Nahrání souboru upload_file=Soubor pro nahrání @@ -198,11 +182,9 @@ upload_elink=Nelze nahrát symbolický link upload_zip=Dekomprimovat ZIP nebo TAR soubor? upload_yes=Ano, a poté smazat upload_user=Nahrát pod uživatelem - find_eaccess=Nemáte oprávnění přístupus $1 find_eexist=$1 neexistuje v $2 find_edir=$1 není adresář v $2 - cancel=Opustit close=Zavřít eopen=Chyba při nahrávání : $1 @@ -213,20 +195,15 @@ chmod_elink=Symlink neúspěšný: $1 chmod_echown=Chown neúspěšný : $1 chmod_echmod=Chmod neúspěšný : $1 chmod_efollow=Nemáte oprávnění edotovat symbolické linky - copy_efrom=Nemáte oprávnění kopírovat z '$1' copy_eto=Nemáte oprávnění kopírovat do '$1' copy_elink=Symlink neúspěšně : $1 - delete_eaccess=Nemáte oprávnění mazat '$1' delete_eroot=Adresář '$1' patří mezi ty, které jste určitým způsobem omezili. Proto nemůže být smazán - list_eaccess=Nemáte oprávnění přístupu do tohoto adresáře list_edir=Chyba při vypisování $1 : $2 - move_eto=Nemáte oprávnění přesunout do '$1' move_afrom=Nemáte oprávnění přesunout '$1' - acl_user=Soubory přístupu na serveru pod uživatelem acl_user_def=Shodné s Webmin přihlášením acl_umask=Umask pro nové soubory @@ -272,7 +249,6 @@ acl_noperms=Může změnit oprávnění souborů? acl_nousers=Může změnit vlastníka souboru? acl_filesystems=Může vidět body připojující souborové systémy? acl_contents=Povolit hledání v obsahu souboru? - share_title=Sdílení share_samba=Windows share_nfs=NFS @@ -301,7 +277,6 @@ share_s1=Důvěřovat non-root share_s2=Důvěřovat každému share_lro=Pouze ke čtení share_lrw=Čtení i zápis - log_create_export=Vytvořen NFS export $1 log_modify_export=Modifikován NFS export $1 log_delete_export=Smazán NFS export $1 @@ -319,7 +294,6 @@ log_move=Přesunut soubor $1 do $2 log_delete=Smazán soubor $1 log_attr=Nastaveny adributy souboru $1 log_acl=Nastavno ACL u souboru $1 - search_eaccess=Nemáte oprávnění hledat tento adresář search_title=Najít soubory search_ok=Hledat @@ -348,9 +322,7 @@ search_crit=Kritéria hledání search_list=Výsledky hledání search_down=Stáhnout search_edown=Neexistuje žádný výsledek hledání v souboru, který má být vybraně stažen - facl_eaccess=Nemáte oprávnění nastavit ACLs pro tento soubor - attr_eattrs=Chyba při získávání atributů : $1 attr_efs=Souborový systém $1 nepodporuje atributy attr_add=Přidat atribut @@ -361,13 +333,11 @@ attr_title=Atributy souboru pro $1 attr_create=Přidat atribut attr_edit=Editovat atribut attr_ename=Chybějící název atributu - ext_eattrs=Chyba při získávání EXT atributů : $1 ext_efs=Souborový systém $1 nepodporuje EXT atributy ext_title=EXT atributy pro $1 ext_header=EXT souborové atributy ext_efailed=Chyba při nastavení atributů pro $1 : $2 - eattr_A=Neaktualizovat čas přístupu eattr_a=Může pouze přidat do souboru eattr_c=hustit data na disku @@ -376,7 +346,6 @@ eattr_i=Nepovolit modifikaci eattr_s=Nastaviz nulové bloky při mazání eattr_S=Vždy synchronizovat po zápisu eattr_u=Uložit obsah pro obnovu po smazání - mount_eaccess=Nemáte oprávnění připojovat souborové systémy mount_efstab=Na tento přístupový bod není navázán žádný souborový systém mount_epoint=$1 není přístupový bod @@ -386,22 +355,18 @@ mount_err1=Chyba při připojování $1 : $2 mount_err2=Chyba při odpojování $1 : $2 mount_title1=Připojit souborový systém mount_title2=Odpojit souborový systém - zip_err=Nelze rozbalit soubor : $1 zip_ecmd=Chybějící příkaz $1 zip_eunzip=Chyba při odzipování : $1 zip_ename=Nevypadá to, že se jedná o zip, tar nebo tar.gz soubor zip_euntar=Chyby při odtarování : $1 zip_euntar2=Chyba při dekompresi nebo odtarování : $1 - ddir_title=Adresář pro stažení ddir_rusure=Chcete-li nahrát obsah souboru $1 jako zabaleného, klepněte na jedno z níže uvedených tlačítek označující typ archivu. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Tato vlastnost není k dispozici - preview_etype=Nelze pracovat s typem souboru u $1 preview_etype2=$1 není podporovaný formát obrázku preview_ecmd=Příkaz $1, potřebný pro škálování obrázku, není nainstalován @@ -409,17 +374,14 @@ preview_eimage=Náhled může být zobrazen pouze u obrázků preview_title=Náhled pro $1 preview_bad=Nelze nahrát obrázek do náhledu preview_egd=Chyba při nahrávání obrázku pomocí GD - html_efailed=Chyba při otevírání HTML editoru : $1 html_title=Upravit HTML soubor html_title2=Vytvořit HTML soubor html_save=Uložit a zavřít html_err=Chyba při ukládání HTML souboru - history_title=Historie cest history_ok=Jít na history_button=Historie - extract_etype=Mohou být rozbalovány pouze soubory extract_title=Rozbalit komprimovaný soubor extract_rusure=Určitě chcete rozbalit komprimovaný soubor : diff --git a/file/lang/cs.auto b/file/lang/cs.auto index 2e8bfbffb..b59ecce32 100644 --- a/file/lang/cs.auto +++ b/file/lang/cs.auto @@ -1,8 +1,6 @@ info_apply4=Soubory v tomto adresáři a podadresářích info_apply5=Tento adresář a všechny podadresáře - view_epathinfo=Cesta obsahuje neplatné znaky - extract_show=Zobrazit obsah extract_err2=Nepodařilo se získat obsah souboru : $1 extract_shown=Obsah komprimovaného souboru diff --git a/file/lang/da.auto b/file/lang/da.auto index 4de3a5fff..362a3dd28 100644 --- a/file/lang/da.auto +++ b/file/lang/da.auto @@ -3,7 +3,6 @@ index_nojava=Dette modul kræver, at Java fungerer, men din browser understøtte index_eremote=Der er ingen Unix-bruger, der matcher Webmin-login $1. index_index=Vend tilbage til Webmin-indeks. switch_euser=Unix-bruger findes ikke! - top_ret=Indeks top_down=Gemme top_preview=Eksempel @@ -27,13 +26,11 @@ top_mount=Mount top_search=Find top_config=Config top_efile=Ingen fil valgt - right_name=Navn right_size=Størrelse right_user=Bruger right_group=Gruppe right_date=Dato - edit_enormal=Kun normale filer kan redigeres edit_title=Redigering af $1 edit_title2=Opretter fil @@ -53,7 +50,6 @@ edit_notfound=Teksten $1 blev ikke fundet edit_saveclose=Gem og luk edit_elength=Filen blev afkortet! edit_textmode=Skift til almindelig teksttilstand - info_file=Fil info_path=Sti: info_type=Type: @@ -90,7 +86,6 @@ info_files=Samlede filer: info_dirs=Samlede kataloger: info_getsize=Få størrelse info_esize=Kunne ikke få størrelser : $1 - eacl_eacls=Kunne ikke læse ACL'er : $1 eacl_acltype=ACL-type eacl_aclname=Ansøg til @@ -109,7 +104,6 @@ eacl_edefmask=Der kan højst være en standardmaske ACL-indgang eacl_title=ACL for $1 eacl_owner=Fileejer eacl_edefaults=Hvis en fil har nogen standard ACL, skal den have standardbruger, gruppe og andre ACL'er. - acltype_user=Bruger acltype_group=Gruppe acltype_other=Andre @@ -118,7 +112,6 @@ acltype_default_user=Standardbruger acltype_default_group=Standardgruppe acltype_default_other=Standard andre acltype_default_mask=Standardmaske - delete_mtitle=Slet flere filer delete_dtitle=Slet mappe delete_ftitle=Slet fil @@ -126,13 +119,11 @@ delete_ddesc=Er du sikker på, at du vil slette kataloget $1 og alt dets indhold delete_fdesc=Er du sikker på, at du vil slette filen $1 permanent? delete_mdesc=Er du sikker på, at du vil slette disse filer og mapper permanent? : delete_efailed=Kunne ikke slette $1 : $2 - mkdir_title=Ny telefonbog mkdir_dir=Ny mappe: mkdir_eexists=$1 findes allerede mkdir_efailed=Opret bibliotek mislykkedes : $1 mkdir_eaccess=Du har ikke lov til at oprette '$1' - link_title=Opret link link_from=Link fra: link_to=Link til: @@ -141,7 +132,6 @@ link_efrom=Linkkilde skal være en absolut sti link_efailed=Link mislykkedes : $1 link_efrom2=Du har ikke tilladelse til at linke fra '$1' link_efollow=Det er ikke tilladt at oprette symlinks - rename_title=Omdøb $1 rename_old=Gammelt navn: rename_new=Nyt navn: @@ -151,7 +141,6 @@ rename_eslash=Det nye filnavn $1 indeholder a / rename_efailed=Omdøb mislykkedes : $1 rename_eold=Du har ikke tilladelse til at omdøbe '$1' rename_enew=Du har ikke tilladelse til at omdøbe til '$1' - file_type0=Vejviser file_type1=Tekstfil file_type2=Billedfil @@ -160,31 +149,26 @@ file_type4=Fil file_type5=Symbolisk link file_type6=Enhedsfil file_type7=Rør - view_enormal=Kun normale filer kan ses view_enormal2=Kun normale filer kan downloades view_eaccess=Du har ikke adgang til $1 view_eopen=Kunne ikke åbne $1 : $2 - view_edir=Et arkiv kan kun oprettes til et bibliotek view_ecmd=Den nødvendige kommando $1 for at oprette et arkiv er ikke installeret view_ecomp=Kunne ikke oprette arkiv : $1 view_earchive=Du har ikke tilladelse til at downloade arkiver view_earchmax=Det valgte bibliotek er større end det maksimalt tilladte til arkivering ($1 bytes) view_epathinfo=Stien indeholder ugyldige tegn - paste_ecopy=Du skal klippe eller kopiere, inden du indsætter paste_egone=Den kopierede fil $1 findes ikke længere paste_eover=$1 kan ikke overskrives paste_eself=Du kan ikke indsætte en fil over sig selv paste_emfailed=Flytning mislykkedes : $1 paste_ecfailed=Kopien mislykkedes : $1 - over_title=Fil findes over_msg=Filen $1 findes allerede. Brug feltet nedenfor til at indtaste et nyt filnavn for den indsatte fil. over_new=Nyt filnavn: over_ok=Okay - upload_efailed=Kunne ikke åbne upload : $1 upload_title=Upload fil upload_file=Fil, der skal uploades @@ -201,11 +185,9 @@ upload_elink=Kan ikke uploade til et symbolsk link upload_zip=Fjern komprimering af ZIP- eller TAR-fil? upload_yes=Ja, slet derefter upload_user=Upload som bruger - find_eaccess=Du har ikke adgang til $1 find_eexist=$1 findes ikke i $2 find_edir=$1 er ikke et bibliotek i $2 - cancel=Afbestille close=Tæt eopen=Download mislykkedes : $1 @@ -216,20 +198,15 @@ chmod_elink=symlink mislykkedes : $1 chmod_echown=chown mislykkedes : $1 chmod_echmod=chmod mislykkedes : $1 chmod_efollow=Du har ikke tilladelse til at redigere symboliske links - copy_efrom=Du har ikke tilladelse til at kopiere fra '$1' copy_eto=Du har ikke tilladelse til at kopiere til '$1' copy_elink=symlink mislykkedes : $1 - delete_eaccess=Du har ikke tilladelse til at slette '$1' delete_eroot=Kataloget '$1' er en af dem, som du er begrænset til, og kan derfor ikke slettes - list_eaccess=Du har ikke adgang til dette bibliotek list_edir=Kunne ikke liste $1 : $2 - move_eto=Du har ikke tilladelse til at flytte til '$1' move_afrom=Du har ikke tilladelse til at flytte '$1' - acl_user=Få adgang til filer på serveren som bruger acl_user_def=Samme som Webmin-login acl_umask=Umask for nye filer @@ -275,7 +252,6 @@ acl_noperms=Kan ændre filtilladelser? acl_nousers=Kan ændre filejerskab? acl_filesystems=Kan du se filsystemmonteringspunkter? acl_contents=Vil du tillade søgning af filindhold? - share_title=Deling share_samba=vinduer share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Stol på ikke-rod share_s2=Stol på alle share_lro=Læs kun share_lrw=Læse skrive - log_create_export=Oprettet NFS-eksport $1 log_modify_export=Ændret NFS-eksport $1 log_delete_export=NFS-eksport $1 er slettet @@ -322,7 +297,6 @@ log_move=Filen $1 blev flyttet til $2 log_delete=Slettet fil $1 log_attr=Indstil attributter på filen $1 log_acl=Indstil ACL på fil $1 - search_eaccess=Du har ikke tilladelse til at søge i dette bibliotek search_title=Find filer search_ok=Søg nu @@ -351,9 +325,7 @@ search_crit=Søgningskriterier search_list=Søgeresultater search_down=Hent search_edown=Ingen søgeresultatfil, der kan downloades, er valgt - facl_eaccess=Du har ikke tilladelse til at indstille ACL'er til denne fil - attr_eattrs=Kunne ikke få attributter : $1 attr_efs=Filsystemet $1 understøtter ikke attributter attr_add=Tilføj attribut @@ -364,13 +336,11 @@ attr_title=Filattributter for $1 attr_create=Tilføj attribut attr_edit=Rediger attribut attr_ename=Manglende attributnavn - ext_eattrs=Kunne ikke hente EXT-attributter : $1 ext_efs=Filsystemet $1 understøtter ikke EXT-attributter ext_title=EXT attributter for $1 ext_header=EXT-filattributter ext_efailed=Kunne ikke indstille attributter for $1 : $2 - eattr_A=Opdater ikke adgangstider eattr_a=Kan kun føjes til filen eattr_c=Komprimere data på disken @@ -379,7 +349,6 @@ eattr_i=Tillad ikke ændring eattr_s=Nul blokerer, når du sletter eattr_S=Synkroniser altid efter skrivning eattr_u=Gem indhold til fjernelse - mount_eaccess=Du har ikke tilladelse til at montere filsystemer mount_efstab=Der findes intet filsystem på dette monteringspunkt mount_epoint=$1 er ikke et monteringspunkt @@ -389,22 +358,18 @@ mount_err1=Kunne ikke montere $1 : $2 mount_err2=Kunne ikke fjerne montering af $1 : $2 mount_title1=Monter filsystem mount_title2=Fjern filsystemet - zip_err=Kunne ikke udpakke filen : $1 zip_ecmd=Manglende kommando $1 zip_eunzip=Unzip mislykkedes : $1 zip_ename=Ser ikke ud til at være en zip-, tar- eller tar.gz-fil zip_euntar=Un-tar mislykkedes : $1 zip_euntar2=Fjern komprimering og un-tar mislykkedes : $1 - ddir_title=Download katalog ddir_rusure=Hvis du vil hente indholdet af $1 som en arkivfil, skal du klikke på en af knapperne under arkivtypen nedenfor. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TJÆRE - ebutton=Denne funktion er ikke tilgængelig - preview_etype=Kunne ikke udføre filtype for $1 preview_etype2=$1 er ikke i et understøttet billedformat preview_ecmd=Den nødvendige kommando $1 for at skalere dette billede er ikke installeret @@ -412,17 +377,14 @@ preview_eimage=Kun billeder kan forhåndsvises preview_title=Eksempel på $1 preview_bad=Kunne ikke indlæse billede for at få vist preview preview_egd=Kunne ikke indlæse billede med GD - html_efailed=Kunne ikke åbne HTML-editor : $1 html_title=Rediger HTML-fil html_title2=Opret HTML-fil html_save=Gem og luk html_err=HTML-filen kunne ikke gemmes - history_title=Stihistorie history_ok=Gå til history_button=Historie - extract_etype=Kun filer kan udvindes extract_title=Uddrag komprimeret fil extract_rusure=Er du sikker på, at du vil udpakke den komprimerede fil : diff --git a/file/lang/de b/file/lang/de index e2aa914eb..065d1ac0e 100644 --- a/file/lang/de +++ b/file/lang/de @@ -165,7 +165,6 @@ view_enormal=Nur normale Dateien können angezeigt werden view_enormal2=Nur normale Dateien können heruntergeladen werden view_eaccess=Sie dürfen nicht auf $1 zugreifen view_eopen=Fehler beim Öffnen von $1: $2 - view_edir=Ein Archiv kann nur für ein Verzeichnis erstellt werden view_ecmd=Der Befehl $1, der zum Erstellen eines Archivs erforderlich ist, ist nicht installiert view_ecomp=Fehler beim Erstellen des Archivs: $1 @@ -209,6 +208,7 @@ find_edir=$1 ist kein Verzeichnis in $2 cancel=Abbrechen close=Schließen eopen=Download fehlgeschlagen: $1 + chmod_eaccess=Sie dürfen nicht auf '$1' zugreifen chmod_euser=$1: Kein solcher Benutzer chmod_egroup=$1: Keine solche Gruppe @@ -431,4 +431,4 @@ extract_err=Fehler beim Entpacken der Datei: $1 extract_yes=Ja, dann löschen extract_show=Inhalt anzeigen extract_err2=Fehler beim Abrufen des Inhalts der Datei: $1 -extract_shown=Inhalt der komprimierten Datei +extract_shown=Inhalt der komprimierten Datei \ No newline at end of file diff --git a/file/lang/el b/file/lang/el index 274d95d2a..e1966fdc8 100644 --- a/file/lang/el +++ b/file/lang/el @@ -3,7 +3,6 @@ index_nojava=Το άρθρωμα αυτό χρειάζεται java για να index_eremote=Δεν υπάρχει Linux χρήστης που να ταιριάζει με την Webmin σύνδεση $1. index_index=Επιστροφή στο Ευρετήριο Webmin. switch_euser=Ο Linux χρήστης δεν υπάρχει! - top_ret=Ευρετήριο top_down=Αποθήκευση top_preview=Προεπισκόπιση @@ -27,13 +26,11 @@ top_mount=Προσάρτηση top_search=Εύρεση top_config=Ρύθμιση top_efile=Κανένα αρχείο δεν επιλέχθηκε - right_name=Όνομα right_size=Μέγεθος right_user=Ιδιοκτήτης right_group=Ομάδα right_date=Ημερομηνία - edit_enormal=Μόνο κοινά αρχεία μπορούν να επεξεργαστούν edit_title=Επεξεργασία $1 edit_title2=Δημιουργία Αρχείου @@ -53,7 +50,6 @@ edit_notfound=Το κείμενο $1 δεν βρέθηκε edit_saveclose=Αποθήκευση Αλλαγών και Κλείσιμο edit_elength=Τα περιεχόμενα του αρχείου έχουν διαγραφεί! edit_textmode=Αλλαγή σε απλή κατάσταση κειμένου - info_file=Αρχείο info_path=Διαδρομή: info_type=Τύπος: @@ -88,7 +84,6 @@ info_files=Συνολικά αρχεία: info_dirs=Συνολικοί φακέλοι: info_getsize=Λήψη μεγέθους info_esize=Αποτυχία λήψης μεγεθών : $1 - eacl_eacls=Αποτυχία ανάγνωσης ACLs : $1 eacl_acltype=ACL Τύπος eacl_aclname=Εφαρμογή σε @@ -107,7 +102,6 @@ eacl_edefmask=Μπορεί να υπάρξει το πολύ μία προκαθ eacl_title=ACL για $1 eacl_owner=Ιδιοκτήτης αρχείου eacl_edefaults=Εάν ένα αρχείο έχει κάποια προκαθορισμένη ACL, θα πρέπει να έχει προκαθορισμένο ιδιοκτήτη, ομαδα και άλλες ACL. - acltype_user=Ιδιοκτήτης acltype_group=Ομάδα acltype_other=Άλλοι @@ -116,7 +110,6 @@ acltype_default_user=Προκαθορισμένος Ιδιοκτήτης acltype_default_group=Προκαθορισμένη Ομάδα acltype_default_other=Προκαθορισμένοι Άλλοι acltype_default_mask=Προκαθορισμένη Μάσκα - delete_mtitle=Διαγραφή πολλαπλών αρχείων delete_dtitle=Διαγραφή φακέλου delete_ftitle=Διαγραφή αρχείου @@ -124,13 +117,11 @@ delete_ddesc=Ε?στε σίγουρος ότι θέλετε να διαγράψ delete_fdesc=Ε?στε σίγουρος ότι θέλετε να διαγράψετε μόνιμα το αρχείο $1 ; delete_mdesc=Ε?στε σίγουρος ότι θέλετε να διαγράψετε μόνιμα αυτά τα αρχεία και τους φακέλους; : delete_efailed=Αποτυχία διαγραφής $1 : $2 - mkdir_title=Νέος Φάκελος mkdir_dir=Νέος φάκελος: mkdir_eexists=$1 υπάρχει ήδη mkdir_efailed=Η δημιουργία φακέλου απέτυχε : $1 mkdir_eaccess=Δεν έχετε δικαίωμα δημιουργίας '$1' - link_title=Δημιουργία Συνδέσμου link_from=Σύνδεσμος από: link_to=Σύνδεσμος σε: @@ -139,7 +130,6 @@ link_efrom=Η διαδρομή της πηγής θα πρέπει να είνα link_efailed=Η δημιουργία συνδέσμου απέτυχε : $1 link_efrom2=Δεν έχετε δικαίωμα να δημιουργήσετε σύνδεσμο από '$1' link_efollow=Δεν έχετε δικαίωμα να δημιουργήσετε συμβολικούς συνδέσμους - rename_title=Μετονομασία $1 rename_old=Παλιό όνομα: rename_new=Νέο όνομα: @@ -149,7 +139,6 @@ rename_eslash=Το νέο όνομα αρχείου $1 περιέχει μια / rename_efailed=Η μετονομασία απέτυχε : $1 rename_eold=Δεν έχετε δικαίωμα να μετονομάσετε το '$1' rename_enew=Δεν έχετε δικαίωμα να μετονομάσετε σε '$1' - file_type0=Φάκελος file_type1=Αρχείο κειμένου file_type2=Αρχείο εικόνας @@ -158,30 +147,25 @@ file_type4=Αρχείο file_type5=Συμβολικός δεσμός file_type6=Αρχείο συσκευής file_type7=Σωλήνωση - view_enormal=Μόνο κοινά αρχείο μπορούν να εμφανιστούν view_enormal2=Μόνο κοινά αρχεία μπορούν να κατεβούν view_eaccess=Δεν έχετε δικαίωμα πρόσβασης στο $1 view_eopen=Αποτυχία ανάγνωσης $1 : $2 - view_edir=Συμπιεσμένο αρχείο μπορεί να δημιουργηθεί μόνο για έναν φάκελο view_ecmd=Η εντολή $1 που χρειάζεται για την δημιουργία ενός συμπιεσμένου αρχείου δεν είναι εγκατεστημένη view_ecomp=Αποτυχία δημιουργίας συμπιεσμένου αρχείου : $1 view_earchive=Δεν έχετε το δικαίωμα να κατεβάσετε συμπιεσμένα αρχεία view_earchmax=Ο επιλεγμένος φάκελος είναι μεγαλύτερος από το μέγιστο που επιτρέπεται για συμπίεση ($1 bytes) - paste_ecopy=Πρέπει να κάνετε αντιγραφή ή αποκοπή πριν κάνετε επικόλληση paste_egone=Το αντεγραμμένο αρχείο $1 δεν υπάρχει πλέον paste_eover=Το $1 δεν μπορεί να αντικατασταθεί paste_eself=Δεν μπορείτε να αντικαταστήσετε ένα αρχείο με τον εαυτό του paste_emfailed=Η μετακίνηση απέτυχε : $1 paste_ecfailed=Η αντιγραφή απέτυχε : $1 - over_title=Το Αρχείο Υπάρχει over_msg=Το αρχείο $1 υπάρχει ήδη. Χρησιμοποιήστε το παρακάτω πεδίο για να εισάγετε ένα νέο όνομα για το επικολλούμενο αρχείο. over_new=Νέο όνομα: over_ok=Ok - upload_efailed=Αποτυχία ανάγνωσης μεταφορτωμένου αρχείου : $1 upload_title=Μεταφόρτωση Αρχείου upload_file=Αρχείο για μεταφόρτωση @@ -198,11 +182,9 @@ upload_elink=Δεν μπορείτε να μεταφορτώσετε έναν σ upload_zip=Αποσυμπίεση ZIP ή TAR αρχείου; upload_yes=Ναι, και διαγραφή στην συνέχεια upload_user=Μεταφόρτωση ως χρήστης - find_eaccess=Δεν έχετε δικαίωμα πρόσβαση σε $1 find_eexist=Το $1 δεν υπάρχει στο $2 find_edir=Το $1 δεν είναι φάκελος στο $2 - cancel=Ακύρωση close=Κλέισιμο eopen=Αποτυχία κατεβάσματος αρχείου : $1 @@ -213,19 +195,14 @@ chmod_elink=Η δημιουργία συμβολικού δεσμού απέτυ chmod_echown=Η αλλαγή ιδιοκτήτη/ομάδας απέτυχε : $1 chmod_echmod=Η αλλαγή δικαιωμάτων απέτυχε : $1 chmod_efollow=Δεν έχετε δικαίωμα να επεξεργαστείτε συμβολικούς δεσμούς - copy_efrom=Δεν έχετε δικαίωμα να αντιγράψετε από '$1' copy_eto=Δεν έχετε δικαίωμα να αντιγράψετε σε '$1' copy_elink=Η δημιουργία συμβολικού δεσμού απέτυχε : $1 - delete_eaccess=Δεν έχετε δικαίωμα να διαγράψετε το '$1' - list_eaccess=Δεν έχετ δικαίωμα πρόσβασης σε αυτόν τον φάκελο list_edir=Αποτυχία εμφάνισης λίστας $1 : $2 - move_eto=Δεν έχετε δικαίωμα να μεταφοράς σε '$1' move_afrom=Δεν έχετε δικαίωμα μεταφοράς από '$1' - acl_user=Πρόσβαση αρχείων στον διακομιστή ως χρήστης acl_user_def=?μοιο με όνομα σύνδεσης Webmin acl_umask=Μάσκα νέων αρχείων @@ -271,7 +248,6 @@ acl_noperms=Να μπορεί να αλλάζει δικαιώματα αρχε acl_nousers=Να μπορεί να αλλάζει ιδιοκτήτη/ομάδα αρχείων; acl_filesystems=Να μπορεί να δει τα σημεία προσάρτησης συστημάτων αρχείων; acl_contents=Να επιτρέπεται η αναζήτηση στα περιεχόμενα αρχείων; - share_title=Διαμοιρασμός Αρχείων share_samba=Windows share_nfs=NFS @@ -300,7 +276,6 @@ share_s1=Εμπιστοσύνη σε non-root share_s2=Εμπιστοσύνη Όλων share_lro=Ανάγνωση-μόνο share_lrw=Ανάγνωση-εγγραφή - log_create_export=Δημιουργήθηκε NFS export $1 log_modify_export=Τροποποιήθηκε NFS export $1 log_delete_export=Διαγράφηκε NFS export $1 @@ -318,7 +293,6 @@ log_move=Μετακινήθηκε το αρχείο $1 σε $2 log_delete=Διαγράφηκε το αρχείο $1 log_attr=Ορίστηκαν τα χαρακτηριστικά για το αρχείο $1 log_acl=Ορίστηκαν ACL στο αρχείο $1 - search_eaccess=Δεν έχετε δικαίωμα αναζήτησης σε αυτόν τον φάκελο search_title=Εύρεση αρχείων search_ok=Αναζήτηση Τώρα @@ -347,9 +321,7 @@ search_crit=Κριτήρια αναζήτησης search_list=Αποτελέσματα αναζήτησης search_down=Κατέβασμα αρχείου search_edown=Δεν επιλέχθηκε αρχείο από τα αποτέλεσματα για να κατεβεί - facl_eaccess=Δεν έχετε δικαίωμα να ορίσετε ACLs για αυτό το αρχείο - attr_eattrs=Αποτυχία λήψης χαρακτηριστικών : $1 attr_efs=Το σύστημα αρχείων $1 δεν υποστηρίζει προσθήκη χαρακτηριστικά attr_add=Προσθήκη Χαρακτηριστικού @@ -360,13 +332,11 @@ attr_title=Χαρακτηριστικά αρχείου για $1 attr_create=Προσθήκη Χαρακτηριστικού attr_edit=Επεξεργασία Χαρακτηριστικού attr_ename=Λείπει το όνομα του χαρακτηριστικού - ext_eattrs=Αποτυχία λήψης χαρακτηριστικών EXT : $1 ext_efs=Το σύστημα αρχείων $1 δεν υποστηρίζει χαρακτηριστικά EXT ext_title=EXT χαρακτηριστικά για $1 ext_header=EXT χαρακτηριστικά αρχείου ext_efailed=Αποτυχία ορισμού χαρακτηριστικών για $1 : $2 - eattr_A=Να μην ενημερωθούν οι χρόνοι πρόσβασης eattr_a=Δυνατότητες προσθήκης μόνο στο αρχείο eattr_c=Συμπίεση δεδομένων στο δίσκο @@ -375,7 +345,6 @@ eattr_i=Να μην επιτρέπεται τροποποίηση eattr_s=Zero blocks κατά την διαγραφή eattr_S=Πάντα συγχρονισμός μετά από κάθε εγγραφή eattr_u=Αποθήκευση περιεχομένων για είναι δυνατή η επανάκτηση μετά από διαγραφή - mount_eaccess=Δεν έχετε δικαίωμα προσάρτησης συστημάτων αρχείων mount_efstab=Δεν υπάρχει κανένα σύστημα αρχείου σε αυτό το σημείο προσάρτησης mount_epoint=Το $1 δεν είναι ένα σημείο προσάρτησης @@ -385,22 +354,18 @@ mount_err1=Αποτυχία προσάρτησης $1 : $2 mount_err2=Αποτυχία απο-προσάρτησης $1 : $2 mount_title1=Προσάρτηση συστήματος αρχείων mount_title2=Από-προσάρτηση συστήματος αρχείων - zip_err=Δεν είναι δυνατή η εξαγωγή του αρχείου : $1 zip_ecmd=Λείπει η εντολή $1 zip_eunzip=Η αποσυμπίεση απέτυχε : $1 zip_ename=Δεν φαίνεται να είναι αρχείο τύπου zip, tar ή tar.gz zip_euntar=Αποτυχία εντολής Un-tar : $1 zip_euntar2=Αποτυχία αποσυμπίεσης και εντολής un-tar : $1 - ddir_title=Φάκελος Προορισμού ddir_rusure=Για να κατεβάσετε τα περιεχόμενα του $1 ως ένα συμπιεσμένο αρχείο, κάντε κλικ σε ένα από τους παρακάτω τύπους συμπίεσης. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Αυτή η δυνατότητα δεν είναι διαθέσιμη - preview_etype=Δεν μπορεί να εντοπιστεί ο τύπος αρχείου του $1 preview_etype2=Το $1 δεν ανήκει σε κάποιον υποστηριζόμενο τύπο εικόνας preview_ecmd=Η εντολή $1 που χρειάζεται για την σμίκρυνση της εικόλας δεν είναι εγκατεστημένη @@ -408,17 +373,14 @@ preview_eimage=Μόνο σε εικόνες μπορεί να γίνει προ preview_title=Προεπισκόπιση του $1 preview_bad=Δεν ήταν δυνατή η φόρτωση της εικόνας για προεπισκόπιση preview_egd=Αποτυχία φόρτωσης εικόνας με GD - html_efailed=Αποτυχία εκκίνησης επεξεργαστή HTML : $1 html_title=Επεξεργασία αρχείου HTML html_title2=Δημιουργία αρχείου HTML html_save=Αποθήκευση και Κλείσιμο html_err=Αποτυχία αποθήκευσης αρχείου HTML - history_title=Ιστορικό Διαδρομών Φακέλων history_ok=Μετακίνηση Σε history_button=Ιστορικό - extract_etype=Μόνο αρχεία μπορούν να αποσυμπιεστούν extract_title=Αποσυμπιεση συμπιεσμένου αρχείου extract_rusure=Είστε σίγουροι ότι θέλετε να αποσυμπιέσετε το συμπιεσμένο αρχείο ; diff --git a/file/lang/el.auto b/file/lang/el.auto index 05e55cf5d..f0892f9a1 100644 --- a/file/lang/el.auto +++ b/file/lang/el.auto @@ -1,10 +1,7 @@ info_apply4=Αρχεία σε αυτόν τον κατάλογο και υποκαταλόγους info_apply5=Αυτός ο κατάλογος και όλοι οι υποκαταλόγοι - view_epathinfo=Η διαδρομή περιέχει μη έγκυρους χαρακτήρες - delete_eroot=Ο κατάλογος '$1' είναι ένας από αυτούς στους οποίους είστε περιορισμένος και συνεπώς δεν μπορεί να διαγραφεί - extract_show=Εμφάνιση περιεχομένων extract_err2=Αποτυχία λήψης περιεχομένων αρχείου : $1 extract_shown=Περιεχόμενα του συμπιεσμένου αρχείου diff --git a/file/lang/es b/file/lang/es index 84fcff696..96320ef0d 100644 --- a/file/lang/es +++ b/file/lang/es @@ -2,7 +2,6 @@ index_title=Administrador de Archivos index_nojava=Este módulo requiere java para funcionar, pero su navegador no soporta java index_eremote=No hay ningún usuario Unix que coincida con el usuario de ingreso de Webmin $1. switch_euser=¡El usuario Unix no existe! - top_ret=Indice top_down=Salvar top_edit=Editar @@ -22,13 +21,11 @@ top_share=Compartir top_mount=Montar top_search=Buscar top_config=Configurar - right_name=Nombre right_size=Tamaño right_user=Usuario right_group=Grupo right_date=Fecha - edit_enormal=Solo los archivos normales pueden ser editados edit_title=Editando $1 edit_title2=Creando archivo @@ -47,7 +44,6 @@ edit_efollow=No está autorizado a escribir en el vínculo simbólico '$1' edit_notfound=El texto $1 no fue encontrado edit_saveclose=Salvar y Cerrar edit_elength=¡El archivo se truncó! - info_file=Archivo info_path=Ruta: info_type=Tipo: @@ -76,7 +72,6 @@ info_read=Leer info_write=Escribir info_list=Listar info_exec=Ejecutar - eacl_eacls=Fallo al leer ACLs : $1 eacl_acltype=Tipo de ACL eacl_aclname=Aplicar a @@ -95,7 +90,6 @@ eacl_edefmask=Puede haber a lo sumo una entrada de máscara de ACL por defecto eacl_title=ACL para $1 eacl_owner=Dueño del archivo eacl_edefaults=si un archivo tiene alguna ACL por defecto, debe tener usuario, grupo y otras ACL por defecto. - acltype_user=Usuario acltype_group=Grupo acltype_other=Otros @@ -104,7 +98,6 @@ acltype_default_user=Usuario por defecto acltype_default_group=Grupo por defecto acltype_default_other=Otros por defecto acltype_default_mask=Máscara por defecto - delete_mtitle=Borrar múltiples archivos delete_dtitle=Borrar directorio delete_ftitle=Borrar archivo @@ -112,13 +105,11 @@ delete_ddesc=¿Está seguro que quiere borrar permanentemente el directorio $1 y delete_fdesc=¿Está seguro que quiere borrar permanentemente el archivo $1 ? delete_mdesc=¿Está seguro que quiere borrar permanentemente estos archivos y directorios? : delete_efailed=Fallo al borrar $1 : $2 - mkdir_title=Nuevo Directorio mkdir_dir=Nuevo directorio: mkdir_eexists=$1 ya existe mkdir_efailed=Fallo al crear directorio : $1 mkdir_eaccess=No está autorizado a crear '$1' - link_title=Crear Vínculo link_from=Vincular desde: link_to=Vincular hacia: @@ -127,7 +118,6 @@ link_efrom=No está autorizado a vincular desde '$1' link_efailed=Fallo vínculo : $1 link_efrom2=No tiene permiso para linkar desde '$1' link_efollow=No está autorizado a crear vínculos simbólicos - rename_title=Renombrar $1 rename_old=Nombre anterior: rename_new=Nombre nuevo: @@ -136,7 +126,6 @@ rename_eexists=Ya existe un archivo llamado $1 rename_efailed=Fallo al renombrar : $1 rename_eold=No está autorizado a renombrar '$1' rename_enew=No está autorizado a renombrar a '$1' - file_type0=Directorio file_type1=Archivo de texto file_type2=Archivo de imágen @@ -145,30 +134,25 @@ file_type4=Archivo file_type5=Vínculo simbólico file_type6=Archivo de dispositivo file_type7=Tubería - view_enormal=Solo los archivos normales pueden ser visualizados view_enormal2=Solo los archivos normales pueden ser descargados view_eaccess=No está autorizado a acceder a $1 view_eopen=Fallo al abrir $1 : $2 - view_edir=Un archivo sólo puede ser creado en un directorio view_ecmd=El comando $1, necesario para crear un archivo no está instalado view_ecomp=Falló la creación de archivo: $1 view_earchive=No tiene permiso para descargar archivos view_earchmax=El directorio elegido es mayor que el máximo permitido para archivar ($1 bytes) - paste_ecopy=Debe cortar o copiar antes de pegar paste_egone=El archivo copiado $1 ya no existe paste_eover=$1 no puede ser sobreescrito paste_eself=No puede pegar un archivo sobre si mismo paste_emfailed=Fallo al mover : $1 paste_ecfailed=Fallo al copiar : $1 - over_title=Archivo existe over_msg=El archivo $1 ya existe. Use el campo de abajo para ingresar un nuevo nombre de archivo para el archivo pegado. over_new=Nuevo nombre de archivo: over_ok=Ok - upload_efailed=Fallo al abrir carga : $1 upload_title=Cargar Archivos upload_file=Archivo para cargar @@ -183,11 +167,9 @@ upload_already=El archivo $1 ya existe. ¿Está seguro que desea sobreescribirlo upload_elink=No se puede cargar a un vínculo simbólico upload_zip=¿Descomprimir archivo ZIP o TAR? upload_yes=Si, después borrar - find_eaccess=No está autorizado a acceder a $1 find_eexist=$1 no existe en $2 find_edir=$1 no es un directorio en $2 - cancel=Cancelar close=Cerrar eopen=Descarga fallida: $1 @@ -198,19 +180,14 @@ chmod_elink=fallo en vínculo simbólico : $1 chmod_echown=fallo al cambiar dueño : $1 chmod_echmod=fallo al cambiar modo : $1 chmod_efollow=No está autorizado a editar vínculos simbólicos - copy_efrom=No está autorizado a copiar desde '$1' copy_eto=No está autorizado a copiar a '$1' copy_elink=fallo en vínculo simbólico : $1 - delete_eaccess=No está autorizado a borrar '$1' - list_eaccess=No está autorizado a acceder a este directorio list_edir=Fallo al listar $1 : $2 - move_eto=No está autorizado a mover a '$1' move_afrom=No está autorizado a mover '$1' - acl_user=Acceder a archivos en el servidor como usuario acl_user_def=Igual que el nombre de ingreso de Webmin acl_umask=Máscara de Usuario para Nuevos archivos @@ -251,7 +228,6 @@ acl_unarchive0=$no acl_dostounix=¿Se le pueden convertir las nuevas líneas de DOS? acl_chroot=Cambiar directorio raiz (chroot) para todo el explorador de archivos acl_relto=(relativo a cualquier directorio raiz) - share_title=Compartir share_samba=Windows share_nfs=NFS @@ -280,7 +256,6 @@ share_s1=Confiar en aquellos que no sean raíz share_s2=Confiar en todos share_lro=Solo lectura share_lrw=Lectura-escritura - log_create_export=Creada exportación NFS $1 log_modify_export=Modificada exportación NFS $1 log_delete_export=Borrada exportación NFS $1 @@ -298,7 +273,6 @@ log_move=Movido archivo $1 a $2 log_delete=Borrado archivo $1 log_attr=Configurados atributos en archivo $1 log_acl=Configurado ACL sobre archivo $1 - search_eaccess=No está autorizado a buscar este directorio search_title=Buscar archivos search_ok=Buscar Ahora @@ -324,9 +298,7 @@ search_egroup=Nombre de grupo no ingresado search_esize=El tamaño del archivo debe ser un entero search_crit=Criterio de búsqueda search_list=Resultados de la búsqueda - facl_eaccess=No está autorizado a configurar ACLs para este archivo - attr_eattrs=Fallo al obtener atributos : $1 attr_efs=El sistema de archivos $1 no soporta atributos attr_add=Agregar Atributo @@ -337,13 +309,11 @@ attr_title=Atributos de archivo para $1 attr_create=Agregar atributo attr_edit=Editar atributo attr_ename=Nombre de atributo no ingresado - ext_eattrs=Fallo al obtener atributos EXT : $1 ext_efs=El sistema de archivos $1 no soporta atributos EXT ext_title=Atributos EXT para $1 ext_header=Atributos EXT de archivo ext_efailed=Fallo al configurar atributos para $1 : $2 - eattr_A=No actualizar tiempos de acceso eattr_a=Solo puede agregar a archivo eattr_c=Comprimir datos en el disco @@ -352,7 +322,6 @@ eattr_i=No permitir modificaciones eattr_s=Poner a cero los bloques a borrar eattr_S=Siempre sincronizar despues de escribir eattr_u=Salvar contenido para recuperación después de borrado - mount_eaccess=No está autorizado a montar sistemas de archivos mount_efstab=No existe sistema de archivo en este punto de montaje mount_epoint=$1 no es un punto de montaje @@ -362,18 +331,15 @@ mount_err1=Fallo al montar $1 : $2 mount_err2=Fallo al desmontar $1 : F2 mount_title1=Montar sistema de archivos mount_title2=Desmontar sistema de archivos - zip_err=No se pudo extraer archivo : $1 zip_ecmd=Comando $1 no introducido zip_eunzip=Extracción zip fallida : $1 zip_ename=No parece ser un archivo zip, tar o tar.gz válido zip_euntar=Extracción tar fallida : $1 zip_euntar2=Descompresión y extracción tar fallida : $1 - ddir_title=Descargar Directorio ddir_rusure=Para descargar los contenidos de $1 como un archivo de ficheros, elija abajo uno de los botones de tipo de archivo. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Esta opción no está disponible diff --git a/file/lang/es.auto b/file/lang/es.auto index df7f2984a..e842aa072 100644 --- a/file/lang/es.auto +++ b/file/lang/es.auto @@ -1,12 +1,9 @@ index_index=Regrese al índice de Webmin. - top_preview=Avance top_html=HTML top_extract=Extraer top_efile=Ningún archivo seleccionado - edit_textmode=Cambiar al modo de texto sin formato - info_apply4=Archivos en este directorio y subdirectorios info_apply5=Este directorio y todos los subdirectorios. info_sizeheader=Tamaño del directorio @@ -15,26 +12,19 @@ info_files=Archivos totales: info_dirs=Directorios totales: info_getsize=Obtener tamaño info_esize=Error al obtener tamaños : $1 - rename_eslash=El nuevo nombre de archivo $1 contiene un / - view_epathinfo=La ruta contiene caracteres inválidos - upload_euser=El usuario seleccionado no existe. upload_user=Subir como usuario - delete_eroot=El directorio '$1' es uno de los que está limitado, por lo que no se puede eliminar. - acl_button_preview=Vista previa (ver imagen reducida) acl_noperms=¿Se pueden cambiar los permisos de archivo? acl_nousers=¿Se puede cambiar la propiedad del archivo? acl_filesystems=¿Puede ver los puntos de montaje del sistema de archivos? acl_contents=¿Permitir la búsqueda del contenido del archivo? - search_cont=Que contiene texto search_down=Descargar search_edown=No se seleccionó ningún archivo de resultados de búsqueda para descargar - preview_etype=No se pudo resolver el tipo de archivo para $1 preview_etype2=$1 no está en un formato de imagen compatible preview_ecmd=El comando $1 necesario para escalar esta imagen no está instalado @@ -42,17 +32,14 @@ preview_eimage=Solo las imágenes se pueden previsualizar preview_title=Vista previa de $1 preview_bad=No se pudo cargar la imagen para previsualizar preview_egd=Error al cargar la imagen con GD - html_efailed=Error al abrir el editor HTML : $1 html_title=Editar archivo HTML html_title2=Crear archivo HTML html_save=Guardar y cerrar html_err=Error al guardar el archivo HTML - history_title=Historia del camino history_ok=Ir history_button=Historia - extract_etype=Solo se pueden extraer archivos extract_title=Extraer archivo comprimido extract_rusure=¿Está seguro de que desea extraer el archivo comprimido? diff --git a/file/lang/eu.auto b/file/lang/eu.auto index bb04ff338..15b549de6 100644 --- a/file/lang/eu.auto +++ b/file/lang/eu.auto @@ -3,7 +3,6 @@ index_nojava=Modulu honek Java funtzionatu behar du, baina zure arakatzaileak ez index_eremote=Ez dago Unix erabiltzailerik Webmin saioa $1 ekin bat datorrenik. index_index=Itzuli Webmin aurkibidearen. switch_euser=Unix erabiltzailea ez da existitzen! - top_ret=Index top_down=Save top_preview=Aurreikusi @@ -27,13 +26,11 @@ top_mount=mendia top_search=Aurki top_config=config top_efile=Ez da fitxategirik aukeratu - right_name=izena right_size=Tamaina right_user=Erabiltzaileak right_group=Group right_date=data - edit_enormal=Fitxategi normalak bakarrik editatu daitezke edit_title=$1 editatzen edit_title2=Fitxategia sortzen @@ -53,7 +50,6 @@ edit_notfound=Ez da $1 testua aurkitu edit_saveclose=Gorde eta itxi edit_elength=Fitxategia moztu egin da! edit_textmode=Aldatu testu arrunt modura - info_file=file info_path=Bide-izena: info_type=Mota: @@ -90,7 +86,6 @@ info_files=Fitxategi guztiak: info_dirs=Direktorioak guztira: info_getsize=Lortu Tamaina info_esize=Huts egin du tamainak lortzeko : $1 - eacl_eacls=Huts egin du ACL-ak irakurtzean : $1 eacl_acltype=ACL mota eacl_aclname=Aplikatu @@ -109,7 +104,6 @@ eacl_edefmask=Gehienez ere ACL maskara lehenetsi bat egon daiteke eacl_title=$1 ACL eacl_owner=Fitxategiaren jabea eacl_edefaults=Fitxategiek ACL lehenetsiren bat baldin badu, erabiltzaileak, taldeak eta ACL lehenak izan behar dituzte. - acltype_user=Erabiltzaileak acltype_group=Group acltype_other=Beste batzuk @@ -118,7 +112,6 @@ acltype_default_user=Erabiltzaile lehenetsia acltype_default_group=Lehenetsitako taldea acltype_default_other=Lehenetsiak Beste batzuk acltype_default_mask=Lehenetsitako maskara - delete_mtitle=Ezabatu hainbat fitxategi delete_dtitle=Ezabatu direktorio delete_ftitle=Ezabatu fitxategia @@ -126,13 +119,11 @@ delete_ddesc=Ziur zaude $1 direktorioa eta bere eduki guztia behin betiko ezabat delete_fdesc=Ziur $1 fitxategia behin betiko ezabatu nahi duzula? delete_mdesc=Ziur fitxategi eta direktorio hauek behin betiko ezabatu nahi duzula? : delete_efailed=Ezin izan da $1 : $2 ezabatu - mkdir_title=Direktorio berria mkdir_dir=Direktorio berria: mkdir_eexists=$1 dagoeneko badago mkdir_efailed=Direktorioa sortu da huts egin du : $1 mkdir_eaccess=Ezin duzu '$1' sortu. - link_title=Sortu esteka link_from=Esteka honetatik: link_to=Lotura: @@ -141,7 +132,6 @@ link_efrom=Loturaren iturriak bide absolutua izan behar du link_efailed=Esteka huts egin da : $1 link_efrom2=Ezin duzu '$1' estekatik lotu link_efollow=Ezin duzu lotura sinbolik sortu - rename_title=$1 berrizendatu rename_old=Izen zaharra: rename_new=Izen berria: @@ -151,7 +141,6 @@ rename_eslash=$1 fitxategi izen berriak a / rename_efailed=Aldatu egin da izena : $1 rename_eold=Ezin duzu "$1" berrizendatu rename_enew=Ezin duzu "$1" izenez aldatu - file_type0=Directory file_type1=Testu fitxategia file_type2=Irudi fitxategia @@ -160,31 +149,26 @@ file_type4=file file_type5=Esteka sinbolikoa file_type6=Gailuaren fitxategia file_type7=Kanalizazio - view_enormal=Fitxategi normalak bakarrik ikus daitezke view_enormal2=Fitxategi normalak bakarrik deskarga daitezke view_eaccess=Ezin duzu $1 era sartu view_eopen=Ezin izan da $1 ireki : $2 - view_edir=Artxiboa direktorio batentzat bakarrik sortu daiteke view_ecmd=Artxiboa sortzeko behar den $1 komandoa ez dago instalatuta view_ecomp=Ezin izan da artxiboa sortu : $1 view_earchive=Ezin duzu artxiboak deskargatu view_earchmax=Aukeratutako direktorio hori artxibatzeko onartutako gehienezkoa baino handiagoa da ($1 byte) view_epathinfo=Bideak karaktere baliogabeak ditu - paste_ecopy=Itsatsi aurretik moztu edo kopiatu behar duzu paste_egone=$1 fitxategia kopiatuta ez dago paste_eover=$1 ezin da gainidatzi paste_eself=Ezin duzu fitxategia bere kabuz itsatsi paste_emfailed=Mugimendua huts egin da : $1 paste_ecfailed=Kopiak huts egin du : $1 - over_title=Fitxategiak existitzen dira over_msg=$1 fitxategia lehendik dago. Erabili beheko eremua itsatsitako fitxategiaren izen berria sartzeko. over_new=Fitxategi-izen berria: over_ok=Ados - upload_efailed=Ezin izan da kargatu irekitzea : $1 upload_title=Kargatu fitxategia upload_file=Igotzeko fitxategia @@ -201,11 +185,9 @@ upload_elink=Ezin da esteka sinboliko batera igo upload_zip=Deskonprimitu ZIP edo TAR fitxategia? upload_yes=Bai, ezabatu upload_user=Kargatu erabiltzaile gisa - find_eaccess=Ezin duzu $1 era sartu find_eexist=$1 ez da $2 ren kasuan find_edir=$1 ez da $2 direktorio bat - cancel=Utzi close=Itxi eopen=Deskarga huts egin du : $1 @@ -216,20 +198,15 @@ chmod_elink=symlink huts egin du : $1 chmod_echown=porrota huts egin du : $1 chmod_echmod=chmod huts egin du : $1 chmod_efollow=Ezin duzu esteka sinbolikorik editatu - copy_efrom=Ezin duzu '$1' tik kopiatzea copy_eto=Ez duzu baimenik '$1' kopian kopiatzea copy_elink=symlink huts egin du : $1 - delete_eaccess=Ezin duzu '$1' ezabatu delete_eroot='$1' direktoriora mugatuta zaudenetako bat da eta, beraz, ezin da ezabatu - list_eaccess=Ezin duzu direktorio honetan sartu list_edir=Ezin izan da $1 zerrendatu : $2 - move_eto=Ezin duzu '$1' mugitu move_afrom=Ezin duzu '$1' mugitu - acl_user=Sartu zerbitzari fitxategiak erabiltzaile gisa acl_user_def=Webmin saioa hasteko gauza bera acl_umask=Fitxategi berrien bila @@ -275,7 +252,6 @@ acl_noperms=Aldatu daiteke fitxategien baimenak? acl_nousers=Aldatu al daiteke fitxategiaren jabetza? acl_filesystems=Fitxategi-sistema muntatzeko puntuak ikus al ditzake? acl_contents=Baimendu fitxategien edukia bilatzea? - share_title=partekatzea share_samba=Windows share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Fidatu ez-root share_s2=Konfiantza guztion artean share_lro=Irakurtzeko soilik share_lrw=Irakurri eta idazteko - log_create_export=$1 NFS esportazioa sortu da log_modify_export=$1 esportatutako NFS esportazioa log_delete_export=$1 NFS esportazioa ezabatu da @@ -322,7 +297,6 @@ log_move=$1 fitxategia $2 ra aldatu da log_delete=$1 fitxategia ezabatu da log_attr=Ezarri atributuak $1 fitxategian log_acl=Ezarri ACL $1 fitxategian - search_eaccess=Ezin duzu direktorio honetan bilatu search_title=Bilatu fitxategiak search_ok=Bilatu orain @@ -351,9 +325,7 @@ search_crit=Bilaketa irizpideak search_list=Bilaketaren emaitzak search_down=Deskarga search_edown=Ez da hautatutako deskarga-fitxategirik deskargatzeko - facl_eaccess=Ezin duzu fitxategi honetarako ACLak ezarri - attr_eattrs=Ezin izan da atributuak lortu : $1 attr_efs=$1 fitxategi sistemak ez ditu atributuak onartzen attr_add=Gehitu atributua @@ -364,13 +336,11 @@ attr_title=$1 fitxategiaren atributuak attr_create=Gehitu atributua attr_edit=Editatu Ezaugarriak attr_ename=Ezaugarri atributuaren izena falta da - ext_eattrs=Ezin izan da EXT atributuak lortu : $1 ext_efs=$1 fitxategi sistemak ez ditu EXT atributuak onartzen ext_title=$1 EXT atributuak ext_header=EXT fitxategiaren atributuak ext_efailed=Ezin izan da $1 : $2 atributuak ezarri - eattr_A=Ez eguneratu sarbide-denborak eattr_a=Ezin da fitxategian erantsi eattr_c=Konprimitu datuak diskoan @@ -379,7 +349,6 @@ eattr_i=Ez utzi aldaketarik egin eattr_s=Zero blokeatzen dira ezabatzean eattr_S=Sinkronizatu beti idatzi ondoren eattr_u=Gorde edukia desegiteko - mount_eaccess=Ezin duzu fitxategi-sistemak muntatu mount_efstab=Ez dago fitxategi sistemarik muntaia puntu honetan mount_epoint=$1 ez da mendi puntua @@ -389,22 +358,18 @@ mount_err1=Huts egin du $1 : $2 muntatzean mount_err2=Huts egin du $1 : $2 muntatzean mount_title1=Muntatu fitxategi sistema mount_title2=Muntatu gabeko fitxategi sistema - zip_err=Ezin izan da fitxategia atera : $1 zip_ecmd=$1 komando falta da zip_eunzip=Deskonprimitu huts egin du : $1 zip_ename=Ez dirudi zip, tar edo tar.gz fitxategia denik zip_euntar=Ezin izan da tar-tar bat : $1 zip_euntar2=Deskonprimitu eta ezabatu egin da tar : $1 - ddir_title=Deskargatu direktorio ddir_rusure=$1 edukia artxibo fitxategi gisa deskargatzeko, egin klik beheko artxibo motako botoietako batean. ddir_zip=ikus ddir_tgz=tar.gz ddir_tar=TAR - ebutton=Ezaugarri hau ez dago erabilgarri - preview_etype=Ezin izan da fitxategi mota $1 kalkulatu preview_etype2=$1 ez dago onartutako irudi formatuan preview_ecmd=Irudi hau eskalatzeko behar den $1 komandoa ez dago instalatuta @@ -412,17 +377,14 @@ preview_eimage=Irudiak bakarrik aurrebista daitezke preview_title=$1 aurrebista preview_bad=Ezin izan da irudia aurreikusi kargatu preview_egd=Ezin izan da irudia GD-rekin kargatu - html_efailed=Huts egin du HTML editorea irekitzean : $1 html_title=Editatu HTML fitxategia html_title2=Sortu HTML fitxategia html_save=Gorde eta itxi html_err=Huts egin du HTML fitxategia gordetzean - history_title=Bideen historia history_ok=Joan history_button=Historia - extract_etype=Fitxategiak bakarrik atera daitezke extract_title=Lortu konprimitutako fitxategia extract_rusure=Ziur zaude konprimitutako fitxategia atera nahi duzula : diff --git a/file/lang/fa b/file/lang/fa index 8a0414020..7790c848f 100644 --- a/file/lang/fa +++ b/file/lang/fa @@ -1,377 +1,343 @@ -index_title=مدير پرونده -index_nojava=اين پيمانه جهت اجرا شدن نياز به جاوا دارد اما مرورگر شمااز جاوا پشتيباني نمي‌کند. -index_eremote=کاربر يونيکسي که با $1 جهت ورود به وب‌مين مطابقت کند وجود ندارد. -switch_euser=کاربر يونيکس وجود ندارد! - -top_ret=شاخص -top_down=ذخيره -top_edit=ويرايش -top_refresh=بازآوري -top_info=اطلاعات -top_eacl=ACL -top_attr=Attrs -top_ext=EXT -top_delete=حذف -top_new=جديد -top_upload=بارگيري -top_rename=تغيير نام -top_copy=رونوشت -top_cut=بريدن -top_paste=چسباندن -top_share=اشتراک گذاري -top_mount=سوار کردن -top_search=يافتن -top_config=پيکربندي - -right_name=نام -right_size=اندازه -right_user=کاربر -right_group=گروه -right_date=تاريخ - -edit_enormal=فقط پرونده‌هاي عادي قابل ويرايش مي‌باشند -edit_title=در حال ويرايش $1 -edit_title2=در حال ايجاد کردن پرونده -edit_filename=نام پرونده: -edit_goto=برو به -edit_find=يافتن -edit_gotoline=برو به خط -edit_replace=جايگزين کردن -edit_all=جايگزين کردن همه -edit_searchfor=جستجو براي -edit_replaceby=جايگزين کردن با -edit_eover=$1 قادر به نوشتن مجدد نمي‌باشد -edit_esave=عدم موفقيت در ذخيره کردن پرونده: $1 -edit_eaccess=شما اجازه ذخيره کردن نداريد '$1' -edit_efollow=شما اجازه نوشتن برروي اتصال نمادين '$1' را نداريد -edit_notfound=متن '$1' يافت نشد -edit_saveclose=ذخيره کردن و بستن -edit_elength=پرونده کوتاه شده‌است - -info_file=پرونده -info_path=مسير: -info_type=نوع: -info_size=اندازه: -info_mod=تاريخ اصلاح: -info_link=اتصال به: -info_perms=مجوزها -info_user=کاربر: -info_group=گروه: -info_other=ديگران: -info_octal=مبناي هشت: -info_sticky=محکم: -info_sticky2=تنها مالک مي‌تواند پرونده‌ها را حذف کند -info_own=مالکيت -info_setgid=قراردادن GID: -info_setgid2=پرونده‌ها از گروه ارث برند -info_setgid3=اجرا به‌عنوان گروه -info_apply=به‌کاربستن تغييرات در -info_apply1=فقط اين فهرست راهنما -info_apply2=اين فهرست راهنما و پرونده‌هايش -info_apply3=اين فهرست راهنما و کليه زير فهرستها -info_efailed=عدم موفقيت در به‌روزرساني $1 -info_read=خواندن -info_write=نوشتن -info_list=ليست -info_exec=اجرا - -eacl_eacls=عدم موفقيت در خواندن ACLها: $1 -eacl_acltype=نوع ACL -eacl_aclname=به‌کاربستن در -eacl_aclperms=مجوزها -eacl_add=اضافه کردن ACL نوع: -eacl_remove=حذف ACL -eacl_efs=سيستم پرونده $1 از ACLها پشتيباني نمي‌کند -eacl_create=ايجاد ACL -eacl_edit=ويرايش ACL -eacl_user=مالک پرونده $1 -eacl_group=گروه پرونده $1 -eacl_eowner=کاربر يا گروه جهت به‌کاربستن يافت نشد -eacl_efailed=عدم موفقيت در قرار دادن ACL براي $1: $2 -eacl_emask=حداکثر مي‌توان يک پوشش ورودي ACL داشت -eacl_edefmask=حداکثر مي‌توان يک پوشش ورودي ACL پيش‌گزيده داشت -eacl_title=ACL براي $1 -eacl_owner=مالک پرونده -eacl_edefaults=اگر پرونده شامل تعدادي ACL پيش‌گزيده باشد بايد کاربر، گروه و ACLهاي پيش‌گزيده ديگري داشته باشد - -acltype_user=کاربر -acltype_group=گروه -acltype_other=ديگران -acltype_mask=پوشش -acltype_default_user=کاربر پيش‌گزيده -acltype_default_group=گروه پيش‌گزيده -acltype_default_other=ديگران پيش‌گزيده -acltype_default_mask=پوشش پيش‌گزيده - -delete_mtitle=حذف چندين پرونده -delete_dtitle=حذف فهرست راهنما -delete_ftitle=حذف پرونده -delete_ddesc=آيا از حذف دائم فهرست راهنماي $1 و همه محتويات آن مطمئن هستيد؟ -delete_fdesc=آيا از حذف پرونده $1 مطمئن هستيد؟ -delete_mdesc=آيا از حذف دائمي اين پرونده‌ها و فهرست راهنماها مطمئن هستيد؟ -delete_efailed=عدم موفقيت در حذف $1: $2 - -mkdir_title=فهرست راهنماي جديد -mkdir_dir=فهرست راهنماي جديد: -mkdir_eexists=$1 از قبل وجود دارد -mkdir_efailed=عدم موفقيت در ايجاد فهرست راهنماي: $1 -mkdir_eaccess=شما اجازه ايجاد $1 را نداريد - -link_title=ايجاد اتصال -link_from=اتصال از: -link_to=اتصال به: -link_eexists=$1 از قبل وجود دارد -link_efrom=منبع اتصال بايد يک مسير مطلق باشد -link_efailed=عدم موفقيت در اتصال: $1 -link_efrom2=شما اجازه اتصال از '$1' را نداريد -link_efollow=شما اجازه ايجاد اتصال نمادين را نداريد - -rename_title=تغيير نام $1 -rename_old=نام قبلي: -rename_new=نام جديد: -rename_ok=تغيير نام -rename_eexists=پرونده‌اي با نام $1 از قبل وجود دارد -rename_efailed=عدم موفقيت در تغيير نام: $1 -rename_eold=شما اجازه تغيير نام '$1' را نداريد -rename_enew=شما اجازه تغيير نام به '$1' را نداريد - -file_type0=فهرست راهنما -file_type1=پرونده متني -file_type2=پرونده تصويري -file_type3=پرونده دودويي -file_type4=پرونده -file_type5=اتصال نمادين -file_type6=پرونده دستگاه -file_type7=لوله - -view_enormal=فقط پرونده‌هاي متني را مي‌توان ديد -view_enormal2=فقط پرونده‌هاي معمولي را مي‌توان بار کرد -view_eaccess=شما اجازه دستيابي به $1 را نداريد -view_eopen=عدم موفقيت در باز کردن $1:$2 - -view_edir=ايجاد بايگاني تنها براي فهرست راهنماهاي امکان پذير مي‌باشد -view_ecmd=دستور $1 که براي ايجاد بايگاني لازم است نصب نشده‌است -view_ecomp=عدم موفقيت در ايجاد بايگاني: $1 -view_earchive=شما اجازه بارکردن بايگانيها را نداريد -view_earchmax=فهرست راهنماي انتخاب شده بزرگ‌تر از بيشترين مقداري است که براي بايگاني در نظر گرفته شده‌است ($1 بايت) - -paste_ecopy=شما قبل از چسباندن بايد ببريد يا رونوشت نمائيد -paste_egone=پرونده رونوشت شده $1 وجود ندارد -paste_eover=$1 قابل باز نويسي نمي‌باشد -paste_eself=شما نمي‌توانيد يک پرونده را برروي خودش بچسبانيد -paste_emfailed=عدم موفقيت در انتقال: $1 -paste_ecfailed=عدم موفقيت در رونوشت: $1 - -over_title=پرونده وجود دارد -over_msg=پرونده $1 از قبل وجود دارد از حوزه زير جهت وارد کردن نام جديد براي پرونده چسبانده شده‌استفاده نمائيد -over_new=نام پرونده جديد: -over_ok=تاييد - -upload_efailed=عدم موفقيت در باز کردن بارگيري شده: $1 -upload_title=بارگيري پرونده -upload_file=پرونده جهت بارگيري -upload_dir=بارگيري به فهرست راهنما -upload_ok=بارگيري -upload_conv=آيا خطوط جديد DOS تبديل شوند؟ -upload_efile=پرونده‌اي براي بارگيري انتخاب نشده -upload_edir=فهرست راهنماي مقصد بارگيري موجود نيست -upload_eperm=شما اجازه ايجاد $1 را نداريد -upload_ewrite=عدم موفقيت در نوشتن درون $1:$2 -upload_already=پرونده $1 از قبل وجود دارد از باز نويسي روي آن مطمئن هستيد -upload_elink=نمي‌توان به يک اتصال نمادين بارگيري نمود -upload_zip=آيا پرونده‌هاي tarيا zip از فشردگي خارج شوند؟ -upload_yes=بله و سپس حذف شود - -find_eaccess=شما اجازه دستيابي به $1 را نداريد -find_eexist=$1 درون $2 وجود ندارد -find_edir=$1 يک فهرست راهنما در $2 نيست - -cancel=لغو -close=بستن -eopen=عدم موفقيت در بارگيري کردن: $1 -chmod_eaccess=شما اجازه دستيابي به '$1' را نداريد -chmod_euser=$1: چنين کاربري وجود ندارد -chmod_egroup=$1: چنين گروهي وجود ندارد -chmod_elink=عدم موفقيت در اتصال نمادين -chmod_echown=عدم موفقيت در تغيير مالکيت: $1 -chmod_echmod=عدم موفقيت در تغيير chmod: $1 -chmod_efollow=شما اجازه اجازه ويرايش اتصالهاي نمادين را نداريد - -copy_efrom=شما اجازه اجازه رونوشت برداشتن از $1 را نداريد -copy_eto=شما اجازه اجازه رونويسي در $1 را نداريد -copy_elink=عدم موفقيت در اتصال نمادين: $1 - -delete_eaccess=شما اجازه اجازه حذف $1 را نداريد - -list_eaccess=شما اجازه اجازه دستيابي به اين فهرست راهنما را نداريد -list_edir=عدم موفقيت در ليست کردن$1: $2 - -move_eto=شما اجازه اجازه منتقل کردن به $1 را نداريد -move_afrom=شما اجازه اجازه انتقال '$1' را نداريد - -acl_user=دستيابي به پرونده برروي کارساز به‌عنوان کاربر -acl_user_def=مانند وب‌مين -acl_umask=پوشش براي پرونده‌هاي جديد -acl_follow=آيا اتصالهاي نمادين دنبال شوند؟ -acl_fyes=اگر صاحبان آن يکسان باشند -acl_ro=آيا حالت فقط خواندني است؟ -acl_dirs=فقط اجازه دستيابي به اين فهرست (هاي) راهنما داه شود -acl_nodirs=دستيابي به فهرست (هاي) راهنما ممنوع شود -acl_home=به اضافه فهرست شخصي کاربر وب‌مين -acl_log=آيا کليه اصلاحات پرونده‌ها ثبت شود؟ -acl_goto=اولين فهرست راهنماي اجازه داده شده باز شود؟ -acl_max=بيشينه اندازه بار گذاري -acl_unlim=نامحدود -acl_b=بايت -acl_archive=آيا مي‌توان بايگانيهاي فهرستهاي راهنما را بار کرد؟ -acl_archmax=بله، اگر کوچک‌تر است از: -acl_buttons=دگمه‌هاي قابل دستيابي در نوار ابزار -acl_button_save=ذخيره(بار کردن پرونده) -acl_button_edit=ويرايش(ويرايش پرونده‌هاي متني) -acl_button_info=اطلاعات (ويرايش مجوزها و مالکيت ) -acl_button_acl=ACL (ويرايش ACL) -acl_button_attr=Attr (ويرايش خصيصه‌هاي XFS) -acl_button_ext=EXT (ويرايش خصيصه‌هاي EXT ) -acl_button_search=يافتن (يافتن پرونده‌ها) -acl_button_delete=حذف(حذف پرونده‌ها) -acl_button_new=جديد(ايجاد پرونده متني) -acl_button_upload=بارگيري(بارگيري پرونده‌ها توسط کارخواه) -acl_button_mkdir=جديد (ايجاد فهرست راهنما) -acl_button_makelink=جديد (ايجاد اتصال نمادين) -acl_button_rename=تغيير نام (تغيير نام پرونده) -acl_button_sharing=اشتراک گذاري(تنظيم کردن سامبا و اشتراک گذاري پرونده NFS) -acl_button_mount=سوار (سوار يا پياده کردن سيستم پرونده ) -acl_button_copy=رونوشت٬ برش و چسباندن -acl_unarchive=آيا مي‌توان پرونده‌هاي بايگاني بارگيري شده را استخراج نمود؟ -acl_unarchive2=هميشه سعي شود -acl_unarchive1=$Yes -acl_unarchive0=$No -acl_dostounix=آيا مي‌توان خطوط جديد تبديل شده Dos داشت؟ -acl_chroot=تغيير فهرست راهنماي مدير سيستم براي مدير پرونده وارد شده: -acl_relto=(وابسته به فهرست راهنماي هر مدير سيستم chroot) - -share_title=اشتراک گذاري -share_samba=ويندوز -share_nfs=NFS -share_son=اشتراک گذاري پرونده ويندوز فعال شود -share_soff=اشتراک گذاري پرونده ويندوز غيرفعال شود -share_writable=آيا قابل نوشتن است؟ -share_available=آيا در حال حاضر فعال است؟ -share_sheader=گزينه‌هاي اشتراک گذاري -share_only=فقط -share_guest=آيا براي مهمان قابل دستيابي است؟ -share_comment=شرح -share_nheader=گزينه‌هاي برون‌برد NFS -share_non=اشتراک گذاري پرونده NFS فعال شود -share_noff=اشتراک گذاري پرونده NFS غيرفعال شود -share_desc=شرح -share_ro=ميزبانهاي فقط خواندني -share_rw=ميزبانهاي خواندني و نوشتني -share_root=ميزبانهاي دستيابي به ريشه -share_none=هيچ -share_all=همه -share_listed=ليست شده.. -share_host=ميزبانها -share_opts=گزينه‌ها -share_s0=هيچ کس مطمئن نيست -share_s1=هيچ کس غير از root مطمئن نيست -share_s2=همه مطمئن هستند -share_lro=فقط خواندني -share_lrw=خواندني و نوشتني - -log_create_export=برون‌برد $1 NFS ايجاد شد. -log_modify_export=برون‌برد $1 NFS تغيير کرد. -log_delete_export=برون‌برد $1 NFS حذف شد. -log_create_share=اشتراک $1 سامبا ايجاد شد -log_modify_share=اشتراک $1 سامبا تغيير کرد -log_delete_share=اشتراک $1 سامبا حذف شد -log_save=پرونده $1 ذخيره شد -log_chmod=مجوزهاي پرونده $1 تغيير داده شد -log_mkdir=فهرست راهنماي $1ايجاد شد -log_upload=پرونده $1 بار گذاري شد -log_link=اتصال نمادين از $1 به $2 ايجاد شد -log_relink=اتصال نمادين از $1 به $2 تغيير کرد -log_copy=از پرونده $1 در $2 رونويسي شد -log_move=پرونده $1 به $2 حرکت داده شد -log_delete=پرونده $1حذف شد -log_attr=خصيصه‌هاي پرونده $1 قرار داده شد -log_acl=ACL پرونده $1قرار داده شد - -search_eaccess=شما اجازه جستجو در اين فهرست راهنما را نداريد -search_title=يافتن پرونده‌ها -search_ok=جستجو -search_dir=جستجو در فهرست راهنما -search_match=براي تطبق دادن پرونده‌ها -search_user=کاربر مالک -search_group=گروه مالک -search_any=همه -search_type=نوع پرونده -search_types_=همه -search_types_f=پرونده -search_types_d=فهرست راهنما -search_types_l=اتصال نمادين -search_types_p=لوله نامدار -search_size=اندازه پرونده -search_more=بيش از -search_less=کمتر از -search_xdev=آيا سوار شده‌هاي قبلي نيز جستجو شود؟ -search_edir=فهرست راهنماي جستجو نامعتبر است و يا يافت نشد -search_ematch=عبارت با قاعده تطبيق يافت نشد -search_euser=اسم‌کاربر يافت نشد -search_egroup=نام گروه يافت نشد -search_esize=اندازه پرونده بايد يک عدد صحيح باشد -search_crit=معيارهاي جستجو -search_list=نتايج جستجو - -facl_eaccess=شما اجازه قرار دادن ACLها براي اين پرونده را نداريد - -attr_eattrs=عدم موفقيت در دريافت خصيصه‌ها: $1 -attr_efs=سيستم پرونده $1 از خصيصه‌ها پشتيباني نمي‌کند -attr_add=افزودن خصيصه -attr_name=نام خصيصه -attr_value=مقدار خصيصه -attr_efailed=عدم موفقيت در قرار دادن خصيصه‌ها براي $1: $2 -attr_title=خصيصه پرونده براي $1 -attr_create=افزودن خصيصه -attr_edit=ويرايش خصيصه -attr_ename=نام خصيصه يافت نشد - -ext_eattrs=عدم موفقيت در دريافت خصيصه‌هايEXT: $1 -ext_efs=سيستم پرونده $1از خصيصه‌هاي EXT پشتيباني نمي‌کند -ext_title=خصيصه‌هايEXTبراي $1 -ext_header=خصيصه‌هاي پروندهEXT -ext_efailed=عدم موفقيت در قرار دادن خصيصه‌ها براي $1: $2 - -eattr_A=زمانهاي دستيابي به‌روزرساني نشود -eattr_a=تنها مي‌توان به پرونده‌ها اضافه کرد -eattr_c=داده‌ها برروي ديسک فشرده سازي شوند -eattr_d=با زباله پشتيبان تهيه نشود -eattr_i=اجازه اصلاحات داده نشود -eattr_s=به هنگام حذف کردن بلاکها صفر شوند -eattr_S=هميشه پس از نوشتن همزمان شوند -eattr_u=محتويات براي غيرحذفيها حفظ شوند - -mount_eaccess=شما اجازه سوار کردن سيستم پرونده را نداريد -mount_efstab=هيچ سيستم پرونده‌اي در اين نقطه از سوار وجود دارد -mount_epoint=$1 يک نقطه سوار نيست -mount_rusure1=آيا شما مطمئن هستيد که مي‌خواهيد $1 از $2را سوار نمائيد ? -mount_rusure2=آيا شما مطمئن هستيد که مي‌خواهيد $1 از $2را پياده نمائيد؟ -mount_err1=عدم موفقيت در سوار کردن $1: $2 -mount_err2=عدم موفقيت در پياده کردن $1: $2 -mount_title1=سوار کردن سيستم پرونده -mount_title2=پياده کردن سيستم پرونده - -zip_err=نمي توان پرونده : $1را استخراج نمود -zip_ecmd=دستور $1يافت نشد -zip_eunzip=عدم موفقيت در Unzipکردن: $1 -zip_ename=به نظر مي‌رسد يک پرونده zip, tar يا tar.gz نيست -zip_euntar=عدم موفقيت درUn-tarکردن: $1 -zip_euntar2=عدم موفقيت در خارج کردن از فشرده سازي و un-tar کردن: $1 - -ddir_title=فهرست راهنماي بار کردن -ddir_rusure=براي بار کردن محتويات $1 به‌صورت يک پرونده بايگاني يکي از دگمه‌هاي نوع بايگاني زير را فشار دهيد. -ddir_zip=ZIP -ddir_tgz=TAR.GZ -ddir_tar=TAR - -ebutton=اين خصوصيت قابل دستيابي نيست +index_title=مدير پرونده +index_nojava=اين پيمانه جهت اجرا شدن نياز به جاوا دارد اما مرورگر شمااز جاوا پشتيباني نمي‌کند. +index_eremote=کاربر يونيکسي که با $1 جهت ورود به وب‌مين مطابقت کند وجود ندارد. +switch_euser=کاربر يونيکس وجود ندارد! +top_ret=شاخص +top_down=ذخيره +top_edit=ويرايش +top_refresh=بازآوري +top_info=اطلاعات +top_eacl=ACL +top_attr=Attrs +top_ext=EXT +top_delete=حذف +top_new=جديد +top_upload=بارگيري +top_rename=تغيير نام +top_copy=رونوشت +top_cut=بريدن +top_paste=چسباندن +top_share=اشتراک گذاري +top_mount=سوار کردن +top_search=يافتن +top_config=پيکربندي +right_name=نام +right_size=اندازه +right_user=کاربر +right_group=گروه +right_date=تاريخ +edit_enormal=فقط پرونده‌هاي عادي قابل ويرايش مي‌باشند +edit_title=در حال ويرايش $1 +edit_title2=در حال ايجاد کردن پرونده +edit_filename=نام پرونده: +edit_goto=برو به +edit_find=يافتن +edit_gotoline=برو به خط +edit_replace=جايگزين کردن +edit_all=جايگزين کردن همه +edit_searchfor=جستجو براي +edit_replaceby=جايگزين کردن با +edit_eover=$1 قادر به نوشتن مجدد نمي‌باشد +edit_esave=عدم موفقيت در ذخيره کردن پرونده: $1 +edit_eaccess=شما اجازه ذخيره کردن نداريد '$1' +edit_efollow=شما اجازه نوشتن برروي اتصال نمادين '$1' را نداريد +edit_notfound=متن '$1' يافت نشد +edit_saveclose=ذخيره کردن و بستن +edit_elength=پرونده کوتاه شده‌است +info_file=پرونده +info_path=مسير: +info_type=نوع: +info_size=اندازه: +info_mod=تاريخ اصلاح: +info_link=اتصال به: +info_perms=مجوزها +info_user=کاربر: +info_group=گروه: +info_other=ديگران: +info_octal=مبناي هشت: +info_sticky=محکم: +info_sticky2=تنها مالک مي‌تواند پرونده‌ها را حذف کند +info_own=مالکيت +info_setgid=قراردادن GID: +info_setgid2=پرونده‌ها از گروه ارث برند +info_setgid3=اجرا به‌عنوان گروه +info_apply=به‌کاربستن تغييرات در +info_apply1=فقط اين فهرست راهنما +info_apply2=اين فهرست راهنما و پرونده‌هايش +info_apply3=اين فهرست راهنما و کليه زير فهرستها +info_efailed=عدم موفقيت در به‌روزرساني $1 +info_read=خواندن +info_write=نوشتن +info_list=ليست +info_exec=اجرا +eacl_eacls=عدم موفقيت در خواندن ACLها: $1 +eacl_acltype=نوع ACL +eacl_aclname=به‌کاربستن در +eacl_aclperms=مجوزها +eacl_add=اضافه کردن ACL نوع: +eacl_remove=حذف ACL +eacl_efs=سيستم پرونده $1 از ACLها پشتيباني نمي‌کند +eacl_create=ايجاد ACL +eacl_edit=ويرايش ACL +eacl_user=مالک پرونده $1 +eacl_group=گروه پرونده $1 +eacl_eowner=کاربر يا گروه جهت به‌کاربستن يافت نشد +eacl_efailed=عدم موفقيت در قرار دادن ACL براي $1: $2 +eacl_emask=حداکثر مي‌توان يک پوشش ورودي ACL داشت +eacl_edefmask=حداکثر مي‌توان يک پوشش ورودي ACL پيش‌گزيده داشت +eacl_title=ACL براي $1 +eacl_owner=مالک پرونده +eacl_edefaults=اگر پرونده شامل تعدادي ACL پيش‌گزيده باشد بايد کاربر، گروه و ACLهاي پيش‌گزيده ديگري داشته باشد +acltype_user=کاربر +acltype_group=گروه +acltype_other=ديگران +acltype_mask=پوشش +acltype_default_user=کاربر پيش‌گزيده +acltype_default_group=گروه پيش‌گزيده +acltype_default_other=ديگران پيش‌گزيده +acltype_default_mask=پوشش پيش‌گزيده +delete_mtitle=حذف چندين پرونده +delete_dtitle=حذف فهرست راهنما +delete_ftitle=حذف پرونده +delete_ddesc=آيا از حذف دائم فهرست راهنماي $1 و همه محتويات آن مطمئن هستيد؟ +delete_fdesc=آيا از حذف پرونده $1 مطمئن هستيد؟ +delete_mdesc=آيا از حذف دائمي اين پرونده‌ها و فهرست راهنماها مطمئن هستيد؟ +delete_efailed=عدم موفقيت در حذف $1: $2 +mkdir_title=فهرست راهنماي جديد +mkdir_dir=فهرست راهنماي جديد: +mkdir_eexists=$1 از قبل وجود دارد +mkdir_efailed=عدم موفقيت در ايجاد فهرست راهنماي: $1 +mkdir_eaccess=شما اجازه ايجاد $1 را نداريد +link_title=ايجاد اتصال +link_from=اتصال از: +link_to=اتصال به: +link_eexists=$1 از قبل وجود دارد +link_efrom=منبع اتصال بايد يک مسير مطلق باشد +link_efailed=عدم موفقيت در اتصال: $1 +link_efrom2=شما اجازه اتصال از '$1' را نداريد +link_efollow=شما اجازه ايجاد اتصال نمادين را نداريد +rename_title=تغيير نام $1 +rename_old=نام قبلي: +rename_new=نام جديد: +rename_ok=تغيير نام +rename_eexists=پرونده‌اي با نام $1 از قبل وجود دارد +rename_efailed=عدم موفقيت در تغيير نام: $1 +rename_eold=شما اجازه تغيير نام '$1' را نداريد +rename_enew=شما اجازه تغيير نام به '$1' را نداريد +file_type0=فهرست راهنما +file_type1=پرونده متني +file_type2=پرونده تصويري +file_type3=پرونده دودويي +file_type4=پرونده +file_type5=اتصال نمادين +file_type6=پرونده دستگاه +file_type7=لوله +view_enormal=فقط پرونده‌هاي متني را مي‌توان ديد +view_enormal2=فقط پرونده‌هاي معمولي را مي‌توان بار کرد +view_eaccess=شما اجازه دستيابي به $1 را نداريد +view_eopen=عدم موفقيت در باز کردن $1:$2 +view_edir=ايجاد بايگاني تنها براي فهرست راهنماهاي امکان پذير مي‌باشد +view_ecmd=دستور $1 که براي ايجاد بايگاني لازم است نصب نشده‌است +view_ecomp=عدم موفقيت در ايجاد بايگاني: $1 +view_earchive=شما اجازه بارکردن بايگانيها را نداريد +view_earchmax=فهرست راهنماي انتخاب شده بزرگ‌تر از بيشترين مقداري است که براي بايگاني در نظر گرفته شده‌است ($1 بايت) +paste_ecopy=شما قبل از چسباندن بايد ببريد يا رونوشت نمائيد +paste_egone=پرونده رونوشت شده $1 وجود ندارد +paste_eover=$1 قابل باز نويسي نمي‌باشد +paste_eself=شما نمي‌توانيد يک پرونده را برروي خودش بچسبانيد +paste_emfailed=عدم موفقيت در انتقال: $1 +paste_ecfailed=عدم موفقيت در رونوشت: $1 +over_title=پرونده وجود دارد +over_msg=پرونده $1 از قبل وجود دارد از حوزه زير جهت وارد کردن نام جديد براي پرونده چسبانده شده‌استفاده نمائيد +over_new=نام پرونده جديد: +over_ok=تاييد +upload_efailed=عدم موفقيت در باز کردن بارگيري شده: $1 +upload_title=بارگيري پرونده +upload_file=پرونده جهت بارگيري +upload_dir=بارگيري به فهرست راهنما +upload_ok=بارگيري +upload_conv=آيا خطوط جديد DOS تبديل شوند؟ +upload_efile=پرونده‌اي براي بارگيري انتخاب نشده +upload_edir=فهرست راهنماي مقصد بارگيري موجود نيست +upload_eperm=شما اجازه ايجاد $1 را نداريد +upload_ewrite=عدم موفقيت در نوشتن درون $1:$2 +upload_already=پرونده $1 از قبل وجود دارد از باز نويسي روي آن مطمئن هستيد +upload_elink=نمي‌توان به يک اتصال نمادين بارگيري نمود +upload_zip=آيا پرونده‌هاي tarيا zip از فشردگي خارج شوند؟ +upload_yes=بله و سپس حذف شود +find_eaccess=شما اجازه دستيابي به $1 را نداريد +find_eexist=$1 درون $2 وجود ندارد +find_edir=$1 يک فهرست راهنما در $2 نيست +cancel=لغو +close=بستن +eopen=عدم موفقيت در بارگيري کردن: $1 +chmod_eaccess=شما اجازه دستيابي به '$1' را نداريد +chmod_euser=$1: چنين کاربري وجود ندارد +chmod_egroup=$1: چنين گروهي وجود ندارد +chmod_elink=عدم موفقيت در اتصال نمادين +chmod_echown=عدم موفقيت در تغيير مالکيت: $1 +chmod_echmod=عدم موفقيت در تغيير chmod: $1 +chmod_efollow=شما اجازه اجازه ويرايش اتصالهاي نمادين را نداريد +copy_efrom=شما اجازه اجازه رونوشت برداشتن از $1 را نداريد +copy_eto=شما اجازه اجازه رونويسي در $1 را نداريد +copy_elink=عدم موفقيت در اتصال نمادين: $1 +delete_eaccess=شما اجازه اجازه حذف $1 را نداريد +list_eaccess=شما اجازه اجازه دستيابي به اين فهرست راهنما را نداريد +list_edir=عدم موفقيت در ليست کردن$1: $2 +move_eto=شما اجازه اجازه منتقل کردن به $1 را نداريد +move_afrom=شما اجازه اجازه انتقال '$1' را نداريد +acl_user=دستيابي به پرونده برروي کارساز به‌عنوان کاربر +acl_user_def=مانند وب‌مين +acl_umask=پوشش براي پرونده‌هاي جديد +acl_follow=آيا اتصالهاي نمادين دنبال شوند؟ +acl_fyes=اگر صاحبان آن يکسان باشند +acl_ro=آيا حالت فقط خواندني است؟ +acl_dirs=فقط اجازه دستيابي به اين فهرست (هاي) راهنما داه شود +acl_nodirs=دستيابي به فهرست (هاي) راهنما ممنوع شود +acl_home=به اضافه فهرست شخصي کاربر وب‌مين +acl_log=آيا کليه اصلاحات پرونده‌ها ثبت شود؟ +acl_goto=اولين فهرست راهنماي اجازه داده شده باز شود؟ +acl_max=بيشينه اندازه بار گذاري +acl_unlim=نامحدود +acl_b=بايت +acl_archive=آيا مي‌توان بايگانيهاي فهرستهاي راهنما را بار کرد؟ +acl_archmax=بله، اگر کوچک‌تر است از: +acl_buttons=دگمه‌هاي قابل دستيابي در نوار ابزار +acl_button_save=ذخيره(بار کردن پرونده) +acl_button_edit=ويرايش(ويرايش پرونده‌هاي متني) +acl_button_info=اطلاعات (ويرايش مجوزها و مالکيت ) +acl_button_acl=ACL (ويرايش ACL) +acl_button_attr=Attr (ويرايش خصيصه‌هاي XFS) +acl_button_ext=EXT (ويرايش خصيصه‌هاي EXT ) +acl_button_search=يافتن (يافتن پرونده‌ها) +acl_button_delete=حذف(حذف پرونده‌ها) +acl_button_new=جديد(ايجاد پرونده متني) +acl_button_upload=بارگيري(بارگيري پرونده‌ها توسط کارخواه) +acl_button_mkdir=جديد (ايجاد فهرست راهنما) +acl_button_makelink=جديد (ايجاد اتصال نمادين) +acl_button_rename=تغيير نام (تغيير نام پرونده) +acl_button_sharing=اشتراک گذاري(تنظيم کردن سامبا و اشتراک گذاري پرونده NFS) +acl_button_mount=سوار (سوار يا پياده کردن سيستم پرونده ) +acl_button_copy=رونوشت٬ برش و چسباندن +acl_unarchive=آيا مي‌توان پرونده‌هاي بايگاني بارگيري شده را استخراج نمود؟ +acl_unarchive2=هميشه سعي شود +acl_unarchive1=$Yes +acl_unarchive0=$No +acl_dostounix=آيا مي‌توان خطوط جديد تبديل شده Dos داشت؟ +acl_chroot=تغيير فهرست راهنماي مدير سيستم براي مدير پرونده وارد شده: +acl_relto=(وابسته به فهرست راهنماي هر مدير سيستم chroot) +share_title=اشتراک گذاري +share_samba=ويندوز +share_nfs=NFS +share_son=اشتراک گذاري پرونده ويندوز فعال شود +share_soff=اشتراک گذاري پرونده ويندوز غيرفعال شود +share_writable=آيا قابل نوشتن است؟ +share_available=آيا در حال حاضر فعال است؟ +share_sheader=گزينه‌هاي اشتراک گذاري +share_only=فقط +share_guest=آيا براي مهمان قابل دستيابي است؟ +share_comment=شرح +share_nheader=گزينه‌هاي برون‌برد NFS +share_non=اشتراک گذاري پرونده NFS فعال شود +share_noff=اشتراک گذاري پرونده NFS غيرفعال شود +share_desc=شرح +share_ro=ميزبانهاي فقط خواندني +share_rw=ميزبانهاي خواندني و نوشتني +share_root=ميزبانهاي دستيابي به ريشه +share_none=هيچ +share_all=همه +share_listed=ليست شده.. +share_host=ميزبانها +share_opts=گزينه‌ها +share_s0=هيچ کس مطمئن نيست +share_s1=هيچ کس غير از root مطمئن نيست +share_s2=همه مطمئن هستند +share_lro=فقط خواندني +share_lrw=خواندني و نوشتني +log_create_export=برون‌برد $1 NFS ايجاد شد. +log_modify_export=برون‌برد $1 NFS تغيير کرد. +log_delete_export=برون‌برد $1 NFS حذف شد. +log_create_share=اشتراک $1 سامبا ايجاد شد +log_modify_share=اشتراک $1 سامبا تغيير کرد +log_delete_share=اشتراک $1 سامبا حذف شد +log_save=پرونده $1 ذخيره شد +log_chmod=مجوزهاي پرونده $1 تغيير داده شد +log_mkdir=فهرست راهنماي $1ايجاد شد +log_upload=پرونده $1 بار گذاري شد +log_link=اتصال نمادين از $1 به $2 ايجاد شد +log_relink=اتصال نمادين از $1 به $2 تغيير کرد +log_copy=از پرونده $1 در $2 رونويسي شد +log_move=پرونده $1 به $2 حرکت داده شد +log_delete=پرونده $1حذف شد +log_attr=خصيصه‌هاي پرونده $1 قرار داده شد +log_acl=ACL پرونده $1قرار داده شد +search_eaccess=شما اجازه جستجو در اين فهرست راهنما را نداريد +search_title=يافتن پرونده‌ها +search_ok=جستجو +search_dir=جستجو در فهرست راهنما +search_match=براي تطبق دادن پرونده‌ها +search_user=کاربر مالک +search_group=گروه مالک +search_any=همه +search_type=نوع پرونده +search_types_=همه +search_types_f=پرونده +search_types_d=فهرست راهنما +search_types_l=اتصال نمادين +search_types_p=لوله نامدار +search_size=اندازه پرونده +search_more=بيش از +search_less=کمتر از +search_xdev=آيا سوار شده‌هاي قبلي نيز جستجو شود؟ +search_edir=فهرست راهنماي جستجو نامعتبر است و يا يافت نشد +search_ematch=عبارت با قاعده تطبيق يافت نشد +search_euser=اسم‌کاربر يافت نشد +search_egroup=نام گروه يافت نشد +search_esize=اندازه پرونده بايد يک عدد صحيح باشد +search_crit=معيارهاي جستجو +search_list=نتايج جستجو +facl_eaccess=شما اجازه قرار دادن ACLها براي اين پرونده را نداريد +attr_eattrs=عدم موفقيت در دريافت خصيصه‌ها: $1 +attr_efs=سيستم پرونده $1 از خصيصه‌ها پشتيباني نمي‌کند +attr_add=افزودن خصيصه +attr_name=نام خصيصه +attr_value=مقدار خصيصه +attr_efailed=عدم موفقيت در قرار دادن خصيصه‌ها براي $1: $2 +attr_title=خصيصه پرونده براي $1 +attr_create=افزودن خصيصه +attr_edit=ويرايش خصيصه +attr_ename=نام خصيصه يافت نشد +ext_eattrs=عدم موفقيت در دريافت خصيصه‌هايEXT: $1 +ext_efs=سيستم پرونده $1از خصيصه‌هاي EXT پشتيباني نمي‌کند +ext_title=خصيصه‌هايEXTبراي $1 +ext_header=خصيصه‌هاي پروندهEXT +ext_efailed=عدم موفقيت در قرار دادن خصيصه‌ها براي $1: $2 +eattr_A=زمانهاي دستيابي به‌روزرساني نشود +eattr_a=تنها مي‌توان به پرونده‌ها اضافه کرد +eattr_c=داده‌ها برروي ديسک فشرده سازي شوند +eattr_d=با زباله پشتيبان تهيه نشود +eattr_i=اجازه اصلاحات داده نشود +eattr_s=به هنگام حذف کردن بلاکها صفر شوند +eattr_S=هميشه پس از نوشتن همزمان شوند +eattr_u=محتويات براي غيرحذفيها حفظ شوند +mount_eaccess=شما اجازه سوار کردن سيستم پرونده را نداريد +mount_efstab=هيچ سيستم پرونده‌اي در اين نقطه از سوار وجود دارد +mount_epoint=$1 يک نقطه سوار نيست +mount_rusure1=آيا شما مطمئن هستيد که مي‌خواهيد $1 از $2را سوار نمائيد ? +mount_rusure2=آيا شما مطمئن هستيد که مي‌خواهيد $1 از $2را پياده نمائيد؟ +mount_err1=عدم موفقيت در سوار کردن $1: $2 +mount_err2=عدم موفقيت در پياده کردن $1: $2 +mount_title1=سوار کردن سيستم پرونده +mount_title2=پياده کردن سيستم پرونده +zip_err=نمي توان پرونده : $1را استخراج نمود +zip_ecmd=دستور $1يافت نشد +zip_eunzip=عدم موفقيت در Unzipکردن: $1 +zip_ename=به نظر مي‌رسد يک پرونده zip, tar يا tar.gz نيست +zip_euntar=عدم موفقيت درUn-tarکردن: $1 +zip_euntar2=عدم موفقيت در خارج کردن از فشرده سازي و un-tar کردن: $1 +ddir_title=فهرست راهنماي بار کردن +ddir_rusure=براي بار کردن محتويات $1 به‌صورت يک پرونده بايگاني يکي از دگمه‌هاي نوع بايگاني زير را فشار دهيد. +ddir_zip=ZIP +ddir_tgz=TAR.GZ +ddir_tar=TAR +ebutton=اين خصوصيت قابل دستيابي نيست diff --git a/file/lang/fa.auto b/file/lang/fa.auto index 89bedc7b4..9142e8b35 100644 --- a/file/lang/fa.auto +++ b/file/lang/fa.auto @@ -1,12 +1,9 @@ index_index=به فهرست وبمین بازگردید. - top_preview=پیش نمایش top_html=HTML top_extract=استخراج کردن top_efile=هیچ فایلی انتخاب نشده است - edit_textmode=به حالت متن ساده تغییر دهید - info_setuid=تنظیم شده: info_setuid2=به عنوان کاربر اجرا کنید info_apply4=فایلهای زیر این فهرست و زیر شاخه ها @@ -17,26 +14,19 @@ info_files=کل پرونده ها: info_dirs=کل دایرکتوری ها: info_getsize=اندازه را دریافت کنید info_esize=اندازه گیری نشد :$1 - rename_eslash=نام پرونده$1 حاوی یک / - view_epathinfo=مسیر حاوی کاراکترهای نامعتبر است - upload_euser=کاربر منتخب وجود ندارد. upload_user=به عنوان کاربر بارگذاری شود - delete_eroot=دایرکتوری '$1' یکی از مواردی است که شما به آن محدود هستید و بنابراین نمی توان حذف کرد - acl_button_preview=پیش نمایش (مشاهده تصویر مقیاس بندی شده پایین) acl_noperms=آیا می توانید مجوزهای پرونده را تغییر دهید؟ acl_nousers=آیا می توانید مالکیت پرونده را تغییر دهید؟ acl_filesystems=آیا می توانید نقاط نصب سیستم فایل را مشاهده کنید؟ acl_contents=جستجوی محتوای فایل مجاز است؟ - search_cont=حاوی متن search_down=دانلود search_edown=هیچ پرونده نتیجه جستجو برای بارگیری انتخاب نشده است - preview_etype=نوع پرونده برای$1 انجام نشد preview_etype2=$1 در قالب تصویر پشتیبانی نمی شود preview_ecmd=دستور$1 برای مقیاس این تصویر نصب نشده است @@ -44,17 +34,14 @@ preview_eimage=فقط تصاویر قابل پیش نمایش هستند preview_title=پیش نمایش$1 preview_bad=بارگذاری تصویر برای پیش نمایش انجام نشد preview_egd=بارگیری تصویر با GD انجام نشد - html_efailed=ویرایشگر HTML انجام نشد :$1 html_title=پرونده HTML را ویرایش کنید html_title2=پرونده HTML ایجاد کنید html_save=ذخیره کن و ببند html_err=ذخیره فایل HTML انجام نشد - history_title=تاریخچه مسیر history_ok=قابل اعتماد و متخصص history_button=تاریخ - extract_etype=فقط پرونده ها قابل استخراج هستند extract_title=فایل فشرده شده را استخراج کنید extract_rusure=مطمئن هستید که می خواهید پرونده فشرده شده را استخراج کنید : diff --git a/file/lang/fi.auto b/file/lang/fi.auto index 811f6188c..cc933ddaa 100644 --- a/file/lang/fi.auto +++ b/file/lang/fi.auto @@ -3,7 +3,6 @@ index_nojava=Tämä moduuli vaatii Java-toiminnon, mutta selaimesi ei tue Java-p index_eremote=Webmin-sisäänkirjautumista $1 vastaavaa Unix-käyttäjää ei ole. index_index=Palaa Webmin-hakemistoon. switch_euser=Unix-käyttäjää ei ole! - top_ret=Indeksi top_down=Tallentaa top_preview=esikatselu @@ -27,13 +26,11 @@ top_mount=asentaa top_search=löytö top_config=config top_efile=Ei tiedostoa valittuna - right_name=Nimi right_size=Koko right_user=käyttäjä right_group=Ryhmä right_date=Päivämäärä - edit_enormal=Vain normaaleja tiedostoja voidaan muokata edit_title=Muokataan $1 edit_title2=Luodaan tiedostoa @@ -53,7 +50,6 @@ edit_notfound=Tekstiä $1 ei löytynyt edit_saveclose=Tallenna ja sulje edit_elength=Tiedosto katkaistiin! edit_textmode=Vaihda tekstimuotoon - info_file=tiedosto info_path=Polku: info_type=Tyyppi: @@ -90,7 +86,6 @@ info_files=Tiedostoja yhteensä: info_dirs=Hakemistoja yhteensä: info_getsize=Hanki koko info_esize=Kokojen hakeminen epäonnistui : $1 - eacl_eacls=ACL: ien lukeminen epäonnistui : $1 eacl_acltype=ACL-tyyppi eacl_aclname=Hakea @@ -109,7 +104,6 @@ eacl_edefmask=ACL-oletusmaskin merkintöjä voi olla korkeintaan yksi eacl_title=ACL $1 : lle eacl_owner=Tiedoston omistaja eacl_edefaults=Jos tiedostolla on oletus-ACL, siinä on oltava käyttäjän, ryhmän ja muiden ACL-luettelot. - acltype_user=käyttäjä acltype_group=Ryhmä acltype_other=toiset @@ -118,7 +112,6 @@ acltype_default_user=Oletuskäyttäjä acltype_default_group=Oletusryhmä acltype_default_other=Oletus Muut acltype_default_mask=Oletusmaski - delete_mtitle=Poista useita tiedostoja delete_dtitle=Poista hakemisto delete_ftitle=Poista tiedosto @@ -126,13 +119,11 @@ delete_ddesc=Haluatko varmasti poistaa pysyvästi hakemiston $1 ja sen kaiken si delete_fdesc=Haluatko varmasti poistaa tiedoston $1 pysyvästi? delete_mdesc=Haluatko varmasti poistaa nämä tiedostot ja hakemistot pysyvästi? : delete_efailed= $1:$2 : n poistaminen epäonnistui - mkdir_title=Uusi hakemisto mkdir_dir=Uusi hakemisto: mkdir_eexists=$1 on jo olemassa mkdir_efailed=Hakemiston luominen epäonnistui : $1 mkdir_eaccess=Et voi luoda '$1' - link_title=Luo linkki link_from=Linkki: link_to=Linkki: @@ -141,7 +132,6 @@ link_efrom=Linkin lähteen on oltava ehdoton polku link_efailed=Linkki epäonnistui : $1 link_efrom2=Sinulla ei ole lupaa linkittää osoitteesta '$1' link_efollow=Sinulla ei ole oikeutta luoda linkkejä - rename_title=Nimeä $1 uudelleen rename_old=Vanha nimi: rename_new=Uusi nimi: @@ -151,7 +141,6 @@ rename_eslash=Uusi tiedostonimi $1 sisältää / rename_efailed=Nimeäminen epäonnistui : $1 rename_eold=Sinulla ei ole oikeutta nimetä nimeä '$1' rename_enew=Sinulla ei ole oikeutta nimetä uudelleen '$1' - file_type0=hakemisto file_type1=Tekstitiedosto file_type2=Kuvatiedosto @@ -160,31 +149,26 @@ file_type4=tiedosto file_type5=Symbolinen linkki file_type6=Laitetiedosto file_type7=Putki - view_enormal=Vain normaalit tiedostot voidaan katsella view_enormal2=Vain normaalit tiedostot voidaan ladata view_eaccess=Sinulla ei ole pääsyä $1 : een view_eopen= $1 : $2 avaaminen epäonnistui - view_edir=Arkisto voidaan luoda vain hakemistoon view_ecmd=Arkiston luomiseen tarvittavaa komentoa $1 ei ole asennettu view_ecomp=Arkiston luonti epäonnistui : $1 view_earchive=Et voi ladata arkistoja view_earchmax=Valittu hakemisto on suurempi kuin arkistointiin sallittu enimmäismäärä ($1 tavua) view_epathinfo=Polku sisältää virheellisiä merkkejä - paste_ecopy=Sinun on leikattava tai kopioitava ennen liittämistä paste_egone=Kopioitua tiedostoa $1 ei enää ole paste_eover=$1 ei voi korvata paste_eself=Et voi liittää tiedostoa itseensä paste_emfailed=Siirto epäonnistui : $1 paste_ecfailed=Kopiointi epäonnistui : $1 - over_title=Tiedosto on olemassa over_msg=Tiedosto $1 on jo olemassa. Kirjoita alla olevaan kenttään uusi liitetyn tiedoston nimi. over_new=Uusi tiedostonimi: over_ok=kunnossa - upload_efailed=Lähetyksen avaaminen epäonnistui : $1 upload_title=Lataa tiedosto upload_file=Lataa tiedosto @@ -201,11 +185,9 @@ upload_elink=Ei voi ladata symboliseen linkkiin upload_zip=Pakkaako ZIP- tai TAR-tiedosto? upload_yes=Kyllä, poista sitten upload_user=Lataa käyttäjänä - find_eaccess=Sinulla ei ole pääsyä $1 : een find_eexist=$1 ei ole kohteessa $2 find_edir=$1 ei ole hakemisto hakemistossa $2 - cancel=Peruuttaa close=kiinni eopen=Lataus epäonnistui : $1 @@ -216,20 +198,15 @@ chmod_elink=linkki epäonnistui : $1 chmod_echown=chown epäonnistui : $1 chmod_echmod=chmod epäonnistui : $1 chmod_efollow=Sinulla ei ole oikeutta muokata symbolisia linkkejä - copy_efrom=Sinulla ei ole oikeutta kopioida osoitteesta '$1' copy_eto=Sinulla ei ole oikeutta kopioida tiedostoon '$1' copy_elink=linkki epäonnistui : $1 - delete_eaccess=Et voi poistaa '$1' delete_eroot=Hakemisto '$1' on yksi niistä, joihin olet rajoitettu, joten sitä ei voi poistaa - list_eaccess=Sinulla ei ole pääsyä tähän hakemistoon list_edir= $1:$2 : n luettelointi epäonnistui - move_eto=Sinulla ei ole oikeutta muuttaa '$1' move_afrom=Et voi siirtää '$1' - acl_user=Käytä palvelimen tiedostoja käyttäjänä acl_user_def=Sama kuin Webmin-kirjautuminen acl_umask=Umask uusille tiedostoille @@ -275,7 +252,6 @@ acl_noperms=Voiko tiedostooikeuksia muuttaa? acl_nousers=Voiko muuttaa tiedoston omistajuutta? acl_filesystems=Näetkö tiedostojärjestelmän kiinnityspisteet? acl_contents=Sallitaanko tiedostojen sisällön haku? - share_title=jakaminen share_samba=Windows share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Luotta muihin kuin juuriin share_s2=Luotta kaikkiin share_lro=Lue ainoastaan share_lrw=Lukea kirjoittaa - log_create_export=Luotu NFS-vienti $1 log_modify_export=Muokattu NFS-vienti $1 log_delete_export=Poistettu NFS-vienti $1 @@ -322,7 +297,6 @@ log_move=Siirretty tiedosto $1 - $2 log_delete=Poistettu tiedosto $1 log_attr=Aseta määritteet tiedostolle $1 log_acl=Aseta ACL tiedostoon $1 - search_eaccess=Et voi tehdä hakua tästä hakemistosta search_title=Etsi tiedostoja search_ok=Etsi nyt @@ -351,9 +325,7 @@ search_crit=Hakukriteerit search_list=Hakutulokset search_down=ladata search_edown=Ei valitettua ladattavaa hakutulostiedostoa - facl_eaccess=Et voi asettaa ACL-tiedostoja tälle tiedostolle - attr_eattrs=Määritteiden nouto epäonnistui : $1 attr_efs=Tiedostojärjestelmä $1 ei tue määritteitä attr_add=Lisää ominaisuus @@ -364,13 +336,11 @@ attr_title=Tiedoston attribuutit kohteelle $1 attr_create=Lisää ominaisuus attr_edit=Muokkaa ominaisuutta attr_ename=Puuttuu määritteen nimi - ext_eattrs=EXT-määritteiden saaminen epäonnistui : $1 ext_efs=Tiedostojärjestelmä $1 ei tue EXT-määritteitä ext_title=$1 : n EXT-määrite ext_header=EXT-tiedostomääritteet ext_efailed=$1 : $2 määritteiden määrittäminen epäonnistui - eattr_A=Älä päivitä käyttöaikoja eattr_a=Voidaan liittää vain tiedostoon eattr_c=Pakkaa levyllä olevat tiedot @@ -379,7 +349,6 @@ eattr_i=Älä salli muutoksia eattr_s=Nolla estää poistettaessa eattr_S=Synkronoi aina kirjoittamisen jälkeen eattr_u=Tallenna sisältö poistoa varten - mount_eaccess=Sinulla ei ole oikeutta asentaa tiedostojärjestelmiä mount_efstab=Tiedostojärjestelmää ei ole tässä asennuspisteessä mount_epoint=$1 ei ole liitoskohta @@ -389,22 +358,18 @@ mount_err1= $1:$2 : n asennus epäonnistui mount_err2=Asennuksen $1 poistaminen epäonnistui : $2 mount_title1=Asenna tiedostojärjestelmä mount_title2=Poista tiedostojärjestelmän asennus - zip_err=Tiedostoa ei voitu purkaa : $1 zip_ecmd=Kommentti $1 puuttuu zip_eunzip=Pura purkaminen epäonnistui : $1 zip_ename=Ei näytä olevan zip-, tar- tai tar.gz-tiedosto zip_euntar=Tervan purkaminen epäonnistui : $1 zip_euntar2=Purkaminen ja tervan purkaminen epäonnistui : $1 - ddir_title=Lataa hakemisto ddir_rusure=Voit ladata $1 : n sisällön arkistotiedostona napsauttamalla yhtä alla olevista arkistotyyppipainikkeista. ddir_zip=POSTINUMERO ddir_tgz=tar.gz ddir_tar=TAR - ebutton=Tämä ominaisuus ei ole käytettävissä - preview_etype=$1 tiedostotyyppiä ei onnistunut selvittämään preview_etype2=$1 ei ole tuetussa kuvamuodossa preview_ecmd=Tämän kuvan skaalaamiseksi tarvittavaa komentoa $1 ei ole asennettu @@ -412,17 +377,14 @@ preview_eimage=Vain kuvia voidaan esikatsella preview_title=Esikatselu kohdasta $1 preview_bad=Kuvan lataaminen esikatseluun epäonnistui preview_egd=Kuvan lataaminen GD: llä epäonnistui - html_efailed=HTML-editorin avaaminen epäonnistui : $1 html_title=Muokkaa HTML-tiedostoa html_title2=Luo HTML-tiedosto html_save=Tallenna ja sulje html_err=HTML-tiedoston tallentaminen epäonnistui - history_title=Polun historia history_ok=Mene history_button=Historia - extract_etype=Vain tiedostot voidaan purkaa extract_title=Pura pakattu tiedosto extract_rusure=Haluatko varmasti purkaa pakatun tiedoston : diff --git a/file/lang/fr b/file/lang/fr index 0721e5491..44cb76de7 100644 --- a/file/lang/fr +++ b/file/lang/fr @@ -1,7 +1,6 @@ index_title=Gestionnaire de Fichier index_nojava=Ce module nécessite que java soit en fonction, mais votre fureteur ne le supporte pas switch_euser=L'utilisateur Unix n'existe pas ! - top_edit=Éditer top_refresh=Rafraîchir top_info=Information @@ -14,13 +13,11 @@ top_cut=Couper top_paste=Coller top_share=Partage top_search=Trouver - right_name=Nom right_size=Taille right_user=Usager right_group=Groupe right_date=Date - edit_enormal=Seulement les fichiers normaux peuvent être éditer edit_title=Éditer '$1' edit_title2=Créer un fichier @@ -28,7 +25,6 @@ edit_filename=Nom de fichier: edit_eover='$1' ne peut être écrit par-dessus edit_esave=Impossible d'ouvrir le fichier '$1' edit_eaccess=Vous n'êtes pas autorisé à sauver '$1' - info_file=Fichier info_path=Chemin: info_type=Type: @@ -56,19 +52,16 @@ info_read=Lire info_write=Écrire info_list=Lister info_exec=Exécuter - delete_dtitle=Supprimer un répertoire delete_ftitle=Supprimer un fichier delete_ddesc=Vous êtes sur que vous voulez supprimer définitivement le répertoire '$1' et tout son contenu? delete_fdesc=Vous êtes sur que vous voulez supprimer définitivement le fichier $1? delete_efailed=Impossible de supprimer '$1' : $2 - mkdir_title=Nouveau Répertoire mkdir_dir=Nouveau répertoire: mkdir_eexists='$1' existe déjà mkdir_efailed=Impossible de créer le répertoire : $1 mkdir_eaccess=Vous n'êtes pas autorisé à créer '$1' - link_title=Créer un Lien Symbolique link_from=Lien de: link_to=Lien vers: @@ -76,7 +69,6 @@ link_eexists='$1' Existe déjà link_efrom=Vous n'êtes pas autorisé à créer aucun lien symbolique de '$1' link_efailed=Impossible de faire le lien symbolique '$1' link_efollow=Vous n'êtes pas autorisé à créer aucun lien symbolique - rename_title=Renommer '$1' rename_old=Ancien nom: rename_new=Nouveau nom: @@ -85,7 +77,6 @@ rename_eexists=Un fichier appelé '$1' existe déjà rename_efailed=Impossible de renommer '$1' rename_eold=Vous n'êtes pas autorisé à renommer '$1' rename_enew=Vous n'êtes pas autorisé à renommer pour '$1' - file_type0=Répertoire file_type1=Fichier texte file_type2=Fichier image @@ -94,23 +85,19 @@ file_type4=Fichier file_type5=Lien symbolique file_type6=Fichier de périphérique file_type7=Tuyau - view_enormal=Seulement un fichier normal peut être visionné view_eaccess=Vous n'êtes pas autorisé d'accéder à '$1' view_eopen=Impossible d'ouvrir '$1' : $2 - paste_ecopy=Vous devez copier ou couper avant de coller paste_egone=Le fichier copié '$1' n'existe plus paste_eover='$1' ne peut être écrasé paste_eself=Vous ne pouvez coller un fichier par-dessus lui-même paste_emfailed=Impossible de déplacer '$1' paste_ecfailed=Impossible de copier '$1' - over_title=Le fichier existe over_msg=Le fichier $1 existe déjà. Utiliser le champ ci-dessous pour entrer un nouveau fichier pour le fichier collé. over_new=Nouveau nom de fichier:: over_ok=Ok - upload_efailed=Impossible d'ouvrir l'envoie '$1' upload_title=Envoie de Fichier upload_file=Fichier à envoyer @@ -121,11 +108,9 @@ upload_efile=Aucun fichier n'ont été sélectionné pour envoyer. upload_edir=Le répertoire d'envoi n'existe pas. upload_eperm=Vous n'êtes pas autorisé à créer '$1' upload_ewrite=Impossible d'écrire dans '$1' : $2 - find_eaccess=Vous n'êtes pas autorisé d'accéder à '$1' find_eexist='$1' n'existe pas dans '$2' find_edir='$1' n'est pas un répertoire dans '$2' - cancel=Annuler chmod_eaccess=Vous n'êtes pas autorisé d'accéder à '$1' chmod_euser=$1 : usager inexistant @@ -133,26 +118,20 @@ chmod_egroup=$1 : groupe inexistant chmod_elink=lien symbolique impossible : $1 chmod_echown=Impossible de changer de propriétaire : $1 chmod_echmod=Impossible de changer de permission : $1 - copy_efrom=Vous n'êtes pas autorisé à copier de '$1' copy_eto=Vous n'êtes pas autorisé à copier vers '$1' copy_elink=lien symbolique impossible : $1 - delete_eaccess=Vous n'êtes pas autorisé à supprimer '$1' - list_eaccess=Vous n'êtes pas autorisé d'accéder ce répertoire list_edir=Echec du listage de $1 : $2 - move_eto=Vous n'êtes pas autorisé à déplacer vers '$1' move_afrom=Vous n'êtes pas autorisé à déplacer '$1' - acl_user=Accéder au système de fichier en étant un usager acl_user_def=Pareil que le login Webmin acl_umask=Démasquer tout nouveau fichier acl_follow=Toujours suivre les liens symboliques? acl_dirs=Seulement accès aux répertoires acl_home=Inclure le répertoire personnel de l'utilisateur Webmin - share_title=Partage share_samba=Windows share_nfs=NFS @@ -181,7 +160,6 @@ share_s1=Faire confiance aux non-root share_s2=Faire confiance à tout le monde share_lro=Lecture seule share_lrw=Lecture-écriture - log_create_export=Export NFS $1 créé log_modify_export=Export NFS $1 modifié log_delete_export=Export NFS $1 supprimé @@ -197,7 +175,6 @@ log_relink=Lien symbolique de $1 vers $2 modifié log_copy=Lien symbolique de $1 vers $2 copié log_move=Fichier renommé de $1 en $2 log_delete=Fichier $1 supprimé - search_eaccess=Vous n'avez pas le droit de chercher dans ce répertoire search_title=Trouver des fichiers search_ok=Chercher maintenant diff --git a/file/lang/fr.auto b/file/lang/fr.auto index e348be315..a7e28efc7 100644 --- a/file/lang/fr.auto +++ b/file/lang/fr.auto @@ -1,6 +1,5 @@ index_eremote=Aucun utilisateur Unix ne correspond à la connexion Webmin $1. index_index=Retournez à Index Webmin. - top_ret=Indice top_down=sauvegarder top_preview=Aperçu @@ -12,7 +11,6 @@ top_extract=Extrait top_mount=Monter top_config=Config top_efile=Aucun fichier sélectionné - edit_goto=Aller à edit_find=Trouver edit_gotoline=Aller à la ligne @@ -25,7 +23,6 @@ edit_notfound=Le texte $1 est introuvable edit_saveclose=Sauvegarder et fermer edit_elength=Le fichier a été tronqué! edit_textmode=Passer en mode texte brut - info_octal=Octal: info_apply4=Fichiers sous ce répertoire et sous-répertoires info_apply5=Ce répertoire et tous les sous-répertoires @@ -35,7 +32,6 @@ info_files=Nombre total de fichiers: info_dirs=Total répertoires: info_getsize=Obtenez la taille info_esize=Impossible d'obtenir les tailles : $1 - eacl_eacls=Impossible de lire les ACL : $1 eacl_acltype=Type d'ACL eacl_aclname=Postuler à @@ -54,7 +50,6 @@ eacl_edefmask=Il peut y avoir au plus une entrée ACL de masque par défaut eacl_title=ACL pour $1 eacl_owner=Propriétaire du fichier eacl_edefaults=Si un fichier possède une liste de contrôle d'accès par défaut, il doit avoir un utilisateur, un groupe et d'autres listes de contrôle d'accès par défaut. - acltype_user=Utilisateur acltype_group=Groupe acltype_other=Autres @@ -63,14 +58,10 @@ acltype_default_user=Utilisateur par defaut acltype_default_group=Groupe par défaut acltype_default_other=Par défaut Autres acltype_default_mask=Masque par défaut - delete_mtitle=Supprimer plusieurs fichiers delete_mdesc=Voulez-vous vraiment supprimer définitivement ces fichiers et répertoires? : - link_efrom2=Vous n'êtes pas autorisé à créer un lien à partir de '$1' - rename_eslash=Le nouveau nom de fichier $1 contient un / - view_enormal2=Seuls les fichiers normaux peuvent être téléchargés view_edir=Une archive ne peut être créée que pour un répertoire view_ecmd=La commande $1 nécessaire pour créer une archive n'est pas installée @@ -78,21 +69,16 @@ view_ecomp=Impossible de créer l'archive : $1 view_earchive=Vous n'êtes pas autorisé à télécharger des archives view_earchmax=Le répertoire sélectionné est plus grand que le maximum autorisé pour l'archivage ($1 octets) view_epathinfo=Le chemin contient des caractères non valides - upload_euser=L'utilisateur sélectionné n'existe pas. upload_already=Le fichier $1 existe déjà. Êtes-vous sûr de vouloir l'écraser? upload_elink=Impossible de télécharger vers un lien symbolique upload_zip=Décompresser le fichier ZIP ou TAR? upload_yes=Oui, puis supprimez upload_user=Télécharger en tant qu'utilisateur - close=Fermer eopen=Échec du téléchargement : $1 - chmod_efollow=Vous n'êtes pas autorisé à modifier les liens symboliques - delete_eroot=Le répertoire '$1' est l'un de ceux auxquels vous êtes limité et ne peut donc pas être supprimé - acl_fyes=Si les propriétaires correspondent acl_ro=Mode lecture seule? acl_nodirs=Refuser l'accès aux répertoires @@ -132,16 +118,12 @@ acl_noperms=Peut changer les permissions des fichiers? acl_nousers=Peut changer la propriété du fichier? acl_filesystems=Peut voir les points de montage du système de fichiers? acl_contents=Autoriser la recherche du contenu du fichier? - log_attr=Définir les attributs sur le fichier $1 log_acl=Définir l'ACL sur le fichier $1 - search_cont=Contenant du texte search_down=Télécharger search_edown=Aucun fichier de résultats de recherche à télécharger sélectionné - facl_eaccess=Vous n'êtes pas autorisé à définir des ACL pour ce fichier - attr_eattrs=Échec d'obtention des attributs : $1 attr_efs=Le système de fichiers $1 ne prend pas en charge les attributs attr_add=Ajouter un attribut @@ -152,13 +134,11 @@ attr_title=Attributs de fichier pour $1 attr_create=Ajouter un attribut attr_edit=Modifier l'attribut attr_ename=Nom d'attribut manquant - ext_eattrs=Échec d'obtention des attributs EXT : $1 ext_efs=Le système de fichiers $1 ne prend pas en charge les attributs EXT ext_title=Attributs EXT pour $1 ext_header=Attributs de fichier EXT ext_efailed=Impossible de définir les attributs pour $1 : $2 - eattr_A=Ne pas mettre à jour les temps d'accès eattr_a=Peut seulement ajouter au fichier eattr_c=Compressez les données sur le disque @@ -167,7 +147,6 @@ eattr_i=Ne pas autoriser la modification eattr_s=Zéro bloc lors de la suppression eattr_S=Toujours synchroniser après l'écriture eattr_u=Enregistrer le contenu à restaurer - mount_eaccess=Vous n'êtes pas autorisé à monter des systèmes de fichiers mount_efstab=Aucun système de fichiers n'existe à ce point de montage mount_epoint=$1 n'est pas un point de montage @@ -177,22 +156,18 @@ mount_err1=Impossible de monter $1 : $2 mount_err2=Impossible de démonter $1 : $2 mount_title1=Monter le système de fichiers mount_title2=Démonter le système de fichiers - zip_err=Impossible d'extraire le fichier : $1 zip_ecmd=Commande $1 manquante zip_eunzip=Échec de la décompression : $1 zip_ename=Ne semble pas être un fichier zip, tar ou tar.gz zip_euntar=Échec non tar : $1 zip_euntar2=Échec de la décompression et du décompactage : $1 - ddir_title=Répertoire de téléchargement ddir_rusure=Pour télécharger le contenu de $1 en tant que fichier d'archive, cliquez sur l'un des boutons de type d'archive ci-dessous. ddir_zip=ZIP *: FRANÇAIS ddir_tgz=TAR.GZ ddir_tar=LE GOUDRON - ebutton=Cette fonctionnalité n'est pas disponible - preview_etype=Impossible de déterminer le type de fichier pour $1 preview_etype2=$1 n'est pas dans un format d'image pris en charge preview_ecmd=La commande $1 nécessaire pour mettre à l'échelle cette image n'est pas installée @@ -200,17 +175,14 @@ preview_eimage=Seules les images peuvent être prévisualisées preview_title=Aperçu de $1 preview_bad=Impossible de charger l'image pour prévisualiser preview_egd=Impossible de charger l'image avec GD - html_efailed=Impossible d'ouvrir l'éditeur HTML : $1 html_title=Modifier le fichier HTML html_title2=Créer un fichier HTML html_save=Sauver et fermer html_err=Impossible d'enregistrer le fichier HTML - history_title=Historique du chemin history_ok=Aller à history_button=Histoire - extract_etype=Seuls les fichiers peuvent être extraits extract_title=Extraire le fichier compressé extract_rusure=Voulez-vous vraiment extraire le fichier compressé : diff --git a/file/lang/he.auto b/file/lang/he.auto index 7c3b916f9..c5cabcf89 100644 --- a/file/lang/he.auto +++ b/file/lang/he.auto @@ -3,7 +3,6 @@ index_nojava=מודול זה מחייב את Java כדי לתפקד, אך הדפ index_eremote=אין משתמש Unix התואם להתחברות Webmin $1. index_index=חזור אל אינדקס Webmin. switch_euser=משתמש יוניקס אינו קיים! - top_ret=אינדקס top_down=להציל top_preview=תצוגה מקדימה @@ -27,13 +26,11 @@ top_mount=הר top_search=למצוא top_config=Config top_efile=אף קובץ לא נבחר - right_name=שם right_size=גודל right_user=משתמש right_group=קבוצה right_date=תאריך - edit_enormal=ניתן לערוך רק קבצים רגילים edit_title=עורכת $1 edit_title2=יוצר קובץ @@ -53,7 +50,6 @@ edit_notfound=הטקסט $1 לא נמצא edit_saveclose=שמור סגור edit_elength=הקובץ נכרת! edit_textmode=עבור למצב טקסט רגיל - info_file=קובץ info_path=נתיב: info_type=סוג: @@ -90,7 +86,6 @@ info_files=סך הקבצים: info_dirs=סה"כ ספריות: info_getsize=קבל גודל info_esize=השגת גדלים נכשלה : $1 - eacl_eacls=קריאת רשימות ACL נכשלה : $1 eacl_acltype=סוג ACL eacl_aclname=החל על @@ -109,7 +104,6 @@ eacl_edefmask=יכולה להיות לכל היותר ערך ברירת מחדל eacl_title=ACL עבור $1 eacl_owner=בעל קובץ eacl_edefaults=אם לקובץ יש ACL ברירת מחדל כלשהו, עליו להיות ברירת מחדל של משתמשי קבוצה, קבוצה ושירותי ברירת מחדל אחרים. - acltype_user=משתמש acltype_group=קבוצה acltype_other=אחרים @@ -118,7 +112,6 @@ acltype_default_user=משתמש ברירת מחדל acltype_default_group=קבוצת ברירת מחדל acltype_default_other=ברירת מחדל לאחרים acltype_default_mask=מסכת ברירת מחדל - delete_mtitle=מחק קבצים מרובים delete_dtitle=מחק את הספרייה delete_ftitle=מחק קובץ @@ -126,13 +119,11 @@ delete_ddesc=האם אתה בטוח שברצונך למחוק לצמיתות א delete_fdesc=האם אתה בטוח שברצונך למחוק את הקובץ $1 לצמיתות? delete_mdesc=האם אתה בטוח שברצונך למחוק קבצים וספריות אלה לצמיתות? : delete_efailed=מחיקת $1 : $2 נכשלה - mkdir_title=מדריך חדש mkdir_dir=מדריך חדש: mkdir_eexists=$1 כבר קיים mkdir_efailed=יצירת הספרייה נכשלה : $1 mkdir_eaccess=אינך מורשה ליצור '$1' - link_title=צור קישור link_from=קישור מאת: link_to=קישור ל: @@ -141,7 +132,6 @@ link_efrom=מקור הקישור חייב להיות נתיב מוחלט link_efailed=הקישור נכשל : $1 link_efrom2=אינך מורשה לקשר מ- '$1' link_efollow=אינך מורשה ליצור סימלינקס - rename_title=שנה שם $1 rename_old=שם ישן: rename_new=שם חדש: @@ -151,7 +141,6 @@ rename_eslash=שם הקובץ $1 מכיל / rename_efailed=שינוי השם נכשל : $1 rename_eold=אינך רשאי לשנות את שם '$1' rename_enew=אינך רשאי לשנות את שמו ל- '$1' - file_type0=מדריך file_type1=קובץ טקסט file_type2=קובץ תמונה @@ -160,31 +149,26 @@ file_type4=קובץ file_type5=קישור סמלי file_type6=קובץ מכשיר file_type7=צינור - view_enormal=ניתן להציג רק קבצים רגילים view_enormal2=ניתן להוריד רק קבצים רגילים view_eaccess=אינך רשאי לגשת $1 view_eopen=פתיחת $1 : $2 נכשלה - view_edir=ניתן ליצור ארכיון לספרייה בלבד view_ecmd=הפקודה $1 הדרושה ליצירת ארכיב אינה מותקנת view_ecomp=יצירת ארכיון נכשלה : $1 view_earchive=אינך מורשה להוריד ארכיונים view_earchmax=הספרייה שנבחרה גדולה מהמקסימום המותר לארכיון ($1 בתים) view_epathinfo=הנתיב מכיל תווים לא חוקיים - paste_ecopy=עליך לגזור או להעתיק לפני ההדבקה paste_egone=הקובץ שהועתק $1 כבר לא קיים paste_eover=לא ניתן להחליף את $1 paste_eself=אינך יכול להדביק קובץ על עצמו paste_emfailed=המעבר נכשל : $1 paste_ecfailed=ההעתקה נכשלה : $1 - over_title=הקובץ קיים over_msg=הקובץ $1 כבר קיים. השתמש בשדה למטה כדי להזין שם קובץ חדש עבור הקובץ המודבק. over_new=שם קובץ חדש: over_ok=בסדר - upload_efailed=פתיחת העלאה נכשלה : $1 upload_title=העלה קובץ upload_file=קובץ להעלאה @@ -201,11 +185,9 @@ upload_elink=לא ניתן להעלות לקישור סמלי upload_zip=לבטל דחיסה של קובץ ZIP או TAR? upload_yes=כן, ואז מחק upload_user=העלה כמשתמש - find_eaccess=אינך רשאי לגשת $1 find_eexist=$1 לא קיים ב- $2 find_edir=$1 אינו ספריה ב- $2 - cancel=בטל close=סגור eopen=ההורדה נכשלה : $1 @@ -216,20 +198,15 @@ chmod_elink=symlink נכשל : $1 chmod_echown=המנגינה נכשלה : $1 chmod_echmod=chmod נכשל : $1 chmod_efollow=אינך רשאי לערוך קישורים סמלים - copy_efrom=אינך רשאי להעתיק מ- '$1' copy_eto=אינך מורשה להעתיק ל- '$1' copy_elink=symlink נכשל : $1 - delete_eaccess=אינך מורשה למחוק '$1' delete_eroot=הספרייה '$1' היא מאלו שאתה מוגבל אליהם, ולכן לא ניתן למחוק אותה - list_eaccess=אינך רשאי לגשת לספריה זו list_edir=הרשימה $1 : $2 נכשלה - move_eto=אינך מורשה לעבור ל- '$1' move_afrom=אינך רשאי להעביר '$1' - acl_user=גש לקבצים בשרת כמשתמש acl_user_def=זהה להתחברות Webmin acl_umask=Umask עבור קבצים חדשים @@ -275,7 +252,6 @@ acl_noperms=האם ניתן לשנות הרשאות קבצים? acl_nousers=האם ניתן לשנות בעלות על קבצים? acl_filesystems=האם אתה יכול לראות נקודות הרכבה של מערכת הקבצים? acl_contents=האם לאפשר חיפוש בתוכן הקובץ? - share_title=שיתוף share_samba=חלונות share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=סמוך על שאינו שורש share_s2=סמוך על כולם share_lro=לקריאה בלבד share_lrw=קרוא וכתוב - log_create_export=יצר יצוא NFS $1 log_modify_export=ייצוא NFS שונה $1 log_delete_export=ייצוא NFS $1 נמחק @@ -322,7 +297,6 @@ log_move=הקובץ $1 ל- $2 הועבר log_delete=הקובץ $1 נמחק log_attr=הגדר תכונות בקובץ $1 log_acl=הגדר ACL לקובץ $1 - search_eaccess=אינך רשאי לחפש בספריה זו search_title=מצא קבצים search_ok=חפש כעת @@ -351,9 +325,7 @@ search_crit=קריטריוני חיפוש search_list=תוצאות חיפוש search_down=הורד search_edown=לא נבחר קובץ תוצאות חיפוש להורדה - facl_eaccess=אינך רשאי להגדיר רשימות ACL לקובץ זה - attr_eattrs=השגת תכונות נכשלה : $1 attr_efs=מערכת הקבצים $1 אינה תומכת בתכונות attr_add=הוסף תכונה @@ -364,13 +336,11 @@ attr_title=תכונות קבצים עבור $1 attr_create=הוסף תכונה attr_edit=ערוך תכונה attr_ename=שם התכונה חסר - ext_eattrs=השגת תכונות EXT נכשלה : $1 ext_efs=מערכת הקבצים $1 אינה תומכת בתכונות EXT ext_title=תכונות EXT עבור $1 ext_header=תכונות קובץ EXT ext_efailed=הגדרת תכונות עבור $1 : $2 נכשלה - eattr_A=אל תעדכן זמני גישה eattr_a=יכול להוסיף רק לקובץ eattr_c=דחוס נתונים בדיסק @@ -379,7 +349,6 @@ eattr_i=אל תאפשר שינוי eattr_s=אפס חוסם בעת מחיקה eattr_S=סנכרן תמיד לאחר הכתיבה eattr_u=שמור תכנים לביטול המחיקה - mount_eaccess=אינך מורשה להעלות מערכות קבצים mount_efstab=לא קיימת מערכת קבצים בנקודת הרכבה זו mount_epoint=$1 אינו נקודת הרכבה @@ -389,22 +358,18 @@ mount_err1=הרכבה של $1 : $2 נכשלה mount_err2=ביטול ההתקנה של $1 : $2 נכשל mount_title1=הר מערכת קבצים mount_title2=בטל את הרשת מערכת הקבצים - zip_err=לא ניתן היה לחלץ את הקובץ : $1 zip_ecmd=פקודה $1 חסרה zip_eunzip=הפתיחה נכשלה : $1 zip_ename=לא נראה שקובץ zip, tar או tar.gz zip_euntar=Un-tar נכשל : $1 zip_euntar2=ביטול הדחיסה והסרת הזפת נכשלו : $1 - ddir_title=הורד מדריך ddir_rusure=כדי להוריד את התוכן של $1 כקובץ ארכיון, לחץ על אחד מכפתורי סוג הארכיון שלמטה. ddir_zip=רוכסן ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=תכונה זו אינה זמינה - preview_etype=לא ניתן היה לפתור את סוג הקובץ עבור $1 preview_etype2=$1 אינו בפורמט תמונה נתמך preview_ecmd=הפקודה $1 הדרושה לקנה מידה של תמונה זו אינה מותקנת @@ -412,17 +377,14 @@ preview_eimage=ניתן להציג בתצוגה מקדימה רק תמונות preview_title=תצוגה מקדימה של $1 preview_bad=לא ניתן היה לטעון תמונה לתצוגה מקדימה preview_egd=טעינת התמונה עם GD נכשלה - html_efailed=פתיחת עורך HTML נכשלה : $1 html_title=ערוך קובץ HTML html_title2=צור קובץ HTML html_save=שמור וסגור html_err=שמירת קובץ HTML נכשלה - history_title=היסטוריית נתיבים history_ok=לך ל history_button=היסטוריה - extract_etype=ניתן לחלץ רק קבצים extract_title=חלץ קובץ דחוס extract_rusure=האם אתה בטוח שברצונך לחלץ את הקובץ הדחוס : diff --git a/file/lang/hr.auto b/file/lang/hr.auto index 7d8eb7cff..776467850 100644 --- a/file/lang/hr.auto +++ b/file/lang/hr.auto @@ -3,7 +3,6 @@ index_nojava=Ovaj modul zahtijeva da Java funkcionira, ali vaš preglednik ne po index_eremote=Ne postoji korisnik Unix-a koji odgovara Webmin prijavi $1. index_index=Vratite se na indeks webmin. switch_euser=Unix korisnik ne postoji! - top_ret=Indeks top_down=Uštedjeti top_preview=pregled @@ -27,13 +26,11 @@ top_mount=montiranje top_search=Pronaći top_config=config top_efile=Nije odabrana nijedna datoteka - right_name=Ime right_size=Veličina right_user=Korisnik right_group=Skupina right_date=Datum - edit_enormal=Mogu se uređivati samo normalne datoteke edit_title=Uređivanje $1 edit_title2=Izrada datoteke @@ -53,7 +50,6 @@ edit_notfound=Tekst $1 nije pronađen edit_saveclose=Spremi i zatvori edit_elength=Datoteka je skraćena! edit_textmode=Prebacite se na način jednostavnog teksta - info_file=Datoteka info_path=Staza: info_type=Tip: @@ -90,7 +86,6 @@ info_files=Ukupno datoteka: info_dirs=Ukupno imenika: info_getsize=Dobivanje veličine info_esize=Dobivanje veličina : $1 - eacl_eacls=Pročitavanje ACL-ova nije uspjelo : $1 eacl_acltype=Vrsta ACL-a eacl_aclname=Prijaviti se @@ -109,7 +104,6 @@ eacl_edefmask=Može postojati najviše jedan zadani ACL unos maske eacl_title=ACL za $1 eacl_owner=Vlasnik datoteke eacl_edefaults=Ako datoteka ima zadani ACL, mora imati zadani korisnik, grupu i druge ACL-ove. - acltype_user=Korisnik acltype_group=Skupina acltype_other=Drugi @@ -118,7 +112,6 @@ acltype_default_user=Zadani korisnik acltype_default_group=Zadana grupa acltype_default_other=Zadani drugi acltype_default_mask=Zadana maska - delete_mtitle=Izbrišite više datoteka delete_dtitle=Izbriši direktorij delete_ftitle=Izbrisati dateoteku @@ -126,13 +119,11 @@ delete_ddesc=Jeste li sigurni da želite trajno izbrisati imenik $1 i sav njegov delete_fdesc=Jeste li sigurni da želite trajno izbrisati datoteku $1 ? delete_mdesc=Jeste li sigurni da želite trajno izbrisati ove datoteke i mape? : delete_efailed=Brisanje $1 : $2 nije uspjelo - mkdir_title=Nova mapa mkdir_dir=Novi imenik: mkdir_eexists=$1 već postoji mkdir_efailed=Izrada direktorija nije uspjela : $1 mkdir_eaccess=Nije vam dopušteno stvaranje "$1" - link_title=Stvorite vezu link_from=Link od: link_to=Poveznica za: @@ -141,7 +132,6 @@ link_efrom=Izvor veze mora biti apsolutni put link_efailed=Veza nije uspjela : $1 link_efrom2=Nije vam dopušteno povezivanje s "$1" link_efollow=Nije vam dopušteno stvaranje simbola - rename_title=Preimenovanje $1 rename_old=Staro ime: rename_new=Novo ime: @@ -151,7 +141,6 @@ rename_eslash=Novo ime datoteke $1 sadrži / rename_efailed=Preimenovanje nije uspjelo : $1 rename_eold=Ne smijete preimenovati '$1' rename_enew=Ne možete preimenovati u "$1" - file_type0=Imenik file_type1=Tekstualna datoteka file_type2=Datoteka slika @@ -160,31 +149,26 @@ file_type4=Datoteka file_type5=Simbolična veza file_type6=Datoteka uređaja file_type7=Cijev - view_enormal=Mogu se pregledavati samo normalne datoteke view_enormal2=Preuzimaju se samo uobičajene datoteke view_eaccess=Nije vam dopušten pristup $1 view_eopen=Otvaranje $1 : $2 nije uspjelo - view_edir=Arhiva se može stvoriti samo za direktorij view_ecmd=Naredba $1 potrebna za stvaranje arhive nije instalirana view_ecomp=Izrada arhive nije uspjela : $1 view_earchive=Ne možete preuzimati arhive view_earchmax=Odabrani direktorij je veći od maksimalno dopuštenog za arhiviranje ($1 bajta) view_epathinfo=Put sadrži nevažeće znakove - paste_ecopy=Prije lijepljenja morate izrezati ili kopirati paste_egone=Kopirana datoteka $1 više ne postoji paste_eover=$1 se ne može prebrisati paste_eself=Ne možete zalijepiti datoteku preko sebe paste_emfailed=Premještaj nije uspio : $1 paste_ecfailed=Kopija nije uspjela : $1 - over_title=Dokument postoji over_msg=Datoteka $1 već postoji. Upotrijebite polje u nastavku da biste unijeli novo ime datoteke za zalijepljenu datoteku. over_new=Novo ime datoteke: over_ok=U redu - upload_efailed=Prijenos nije uspio : $1 upload_title=Prijenos datoteke upload_file=Datoteka za prijenos @@ -201,11 +185,9 @@ upload_elink=Prijenos na simboličku vezu nije moguće upload_zip=Prestanite komprimirati ZIP ili TAR datoteku? upload_yes=Da, onda izbrišite upload_user=Prijenos kao korisnik - find_eaccess=Nije vam dopušten pristup $1 find_eexist=$1 ne postoji u $2 find_edir=$1 nije direktorij u $2 - cancel=Otkazati close=Zatvoriti eopen=Preuzimanje nije uspjelo : $1 @@ -216,20 +198,15 @@ chmod_elink=simbol veze nije uspio : $1 chmod_echown=chown nije uspio : $1 chmod_echmod=chmod nije uspio : $1 chmod_efollow=Nije vam dopušteno uređivanje simboličkih veza - copy_efrom=Ne smijete kopirati s '$1' copy_eto=Nije vam dopušteno kopiranje na '$1' copy_elink=simbol veze nije uspio : $1 - delete_eaccess=Ne smijete izbrisati '$1' delete_eroot=Imenik "$1" jedan je od onih na koje ste ograničeni i ne može se izbrisati - list_eaccess=Nije vam dopušteno pristupiti ovom direktoriju list_edir=Nije uspjelo popis $1 : $2 - move_eto=Ne smijete preći na "$1" move_afrom=Ne možete premjestiti "$1" - acl_user=Pristupite datotekama na poslužitelju kao korisniku acl_user_def=Isto kao i Webmin prijava acl_umask=Umask za nove datoteke @@ -275,7 +252,6 @@ acl_noperms=Mogu li promijeniti dopuštenja datoteka? acl_nousers=Mogu li promijeniti vlasništvo datoteke? acl_filesystems=Mogu li vidjeti točke montiranja datotečnog sustava? acl_contents=Želite li omogućiti pretraživanje sadržaja datoteke? - share_title=Dijeljenje share_samba=Windows share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Ne vjerujte u korijen share_s2=Vjerujte svima share_lro=Samo za čitanje share_lrw=Čitanje i pisanje - log_create_export=Izrađen izvoz NFS $1 log_modify_export=Izmijenjeni izvoz NFS $1 log_delete_export=Izbrisan NFS izvoz $1 @@ -322,7 +297,6 @@ log_move=Premještena je datoteka $1 u $2 log_delete=Izbrisana datoteka $1 log_attr=Postavljanje atributa u datoteci $1 log_acl=Postavite ACL u datoteku $1 - search_eaccess=Nije vam dopušteno pretraživati ovaj direktorij search_title=Pronađite datoteke search_ok=Pretražite sada @@ -351,9 +325,7 @@ search_crit=Kriterij pretrage search_list=Rezultati pretraživanja search_down=preuzimanje datoteka search_edown=Nije odabrana datoteka rezultata pretraživanja za preuzimanje - facl_eaccess=Ne možete postaviti ACL-ove za ovu datoteku - attr_eattrs=Nije uspjelo dobiti atribute : $1 attr_efs=Datotečni sustav $1 ne podržava atribute attr_add=Dodavanje atributa @@ -364,13 +336,11 @@ attr_title=Atributi datoteka za $1 attr_create=Dodavanje atributa attr_edit=Uređivanje atributa attr_ename=Nedostaje naziv atributa - ext_eattrs=Nije uspjelo dobiti atribute EXT : $1 ext_efs=Datotečni sustav $1 ne podržava atribute EXT ext_title=EXT atributi za $1 ext_header=EXT atributi datoteka ext_efailed=Nije uspjelo postavljanje atributa za $1 : $2 - eattr_A=Ne ažurirajte vrijeme pristupa eattr_a=Datoteku se može dodati samo eattr_c=Stisnite podatke na disk @@ -379,7 +349,6 @@ eattr_i=Ne dopustite izmjene eattr_s=Nulta blokada prilikom brisanja eattr_S=Uvijek sinkronizirajte nakon pisanja eattr_u=Spremite sadržaj za poništavanje brisanja - mount_eaccess=Nije vam dopušteno montirati datotečne sustave mount_efstab=Na ovom mjestu montiranja ne postoji datotečni sustav mount_epoint=$1 nije točka montiranja @@ -389,22 +358,18 @@ mount_err1=Montiranje $1 : $2 nije uspjelo mount_err2=Deinstaliranje $1 : $2 nije uspjelo mount_title1=Montirajte datotečni sustav mount_title2=Isključi datotečni sustav - zip_err=Nije moguće izdvojiti datoteku : $1 zip_ecmd=Nedostaje naredba $1 zip_eunzip=Poništivanje nije uspjelo : $1 zip_ename=Čini se da nije datoteka zip, tar ili tar.gz zip_euntar=Poništavanje tar-a nije uspjelo : $1 zip_euntar2=Otpakivanje i uklanjanje katrana nije uspjelo : $1 - ddir_title=Preuzmite direktorij ddir_rusure=Da biste preuzeli sadržaj $1 kao arhivsku datoteku, kliknite jedan od gumba vrste arhive u nastavku. ddir_zip=poštanski ddir_tgz=tar.gz ddir_tar=KATRAN - ebutton=Ova značajka nije dostupna - preview_etype=Vrsta datoteke nije uspjela za $1 preview_etype2=$1 nije u podržanom formatu slike preview_ecmd=Naredba $1 potrebna za skaliranje ove slike nije instalirana @@ -412,17 +377,14 @@ preview_eimage=Mogu se pregledati samo slike preview_title=Pregled $1 preview_bad=Učitavanje slike nije moguće preview_egd=Učitavanje slike s GD-om nije uspjelo - html_efailed=Otvaranje HTML uređivača nije uspjelo : $1 html_title=Uredi HTML datoteku html_title2=Stvorite HTML datoteku html_save=Spremi i zatvori html_err=Spremanje HTML datoteke nije uspjelo - history_title=Povijest puta history_ok=Ići history_button=Povijest - extract_etype=Izvaditi mogu samo datoteke extract_title=Izdvajanje komprimirane datoteke extract_rusure=Jeste li sigurni da želite izdvojiti komprimiranu datoteku : diff --git a/file/lang/hu b/file/lang/hu index fc4b0a4d7..e9fb742c3 100644 --- a/file/lang/hu +++ b/file/lang/hu @@ -3,7 +3,6 @@ index_nojava=This module requires java to function, but your browser does not su index_eremote=There is no Unix user matching the Webmin login $1. index_index=Return to Webmin index. switch_euser=Unix user does not exist! - top_ret=Index top_down=Save top_preview=Preview @@ -27,13 +26,11 @@ top_mount=Mount top_search=Find top_config=Config top_efile=No file selected - right_name=Name right_size=Size right_user=User right_group=Group right_date=Date - edit_enormal=Only normal files can be edited edit_title=Editing $1 edit_title2=Creating file @@ -53,7 +50,6 @@ edit_notfound=The text $1 was not found edit_saveclose=Save & Close edit_elength=File was truncated! edit_textmode=Switch to plain text mode - info_file=File info_path=Path: info_type=Type: @@ -88,7 +84,6 @@ info_files=Total files: info_dirs=Total directories: info_getsize=Get Size info_esize=Failed to get sizes : $1 - eacl_eacls=Failed to read ACLs : $1 eacl_acltype=ACL Type eacl_aclname=Apply to @@ -107,7 +102,6 @@ eacl_edefmask=There can be at most one default mask ACL entry eacl_title=ACL for $1 eacl_owner=File owner eacl_edefaults=If a file has any default ACL, it must have default user, group and other ACLs. - acltype_user=User acltype_group=Group acltype_other=Others @@ -116,7 +110,6 @@ acltype_default_user=Default User acltype_default_group=Default Group acltype_default_other=Default Others acltype_default_mask=Default Mask - delete_mtitle=Delete multiple files delete_dtitle=Delete directory delete_ftitle=Delete file @@ -124,13 +117,11 @@ delete_ddesc=Are you sure you want to permanently delete the directory $1 and al delete_fdesc=Are you sure you want to permanently delete the file $1 ? delete_mdesc=Are you sure you want to permanently delete these files and directories? : delete_efailed=Failed to delete $1 : $2 - mkdir_title=New Directory mkdir_dir=New directory: mkdir_eexists=$1 already exists mkdir_efailed=Create directory failed : $1 mkdir_eaccess=You are not allowed to create '$1' - link_title=Create Link link_from=Link from: link_to=Link to: @@ -139,7 +130,6 @@ link_efrom=Link source must be an absolute path link_efailed=Link failed : $1 link_efrom2=You are not allowed to link from '$1' link_efollow=You are not allowed to create symlinks - rename_title=Rename $1 rename_old=Old name: rename_new=New name: @@ -149,7 +139,6 @@ rename_eslash=The new file name $1 contains a / rename_efailed=Rename failed : $1 rename_eold=You are not allowed to rename '$1' rename_enew=You are not allowed to rename to '$1' - file_type0=Directory file_type1=Text file file_type2=Image file @@ -158,30 +147,25 @@ file_type4=File file_type5=Symbolic link file_type6=Device file file_type7=Pipe - view_enormal=Only normal files can be viewed view_enormal2=Only normal files can be downloaded view_eaccess=You are not allowed to access $1 view_eopen=Failed to open $1 : $2 - view_edir=An archive can only be created for a directory view_ecmd=The command $1 needed to create an archive is not installed view_ecomp=Failed to create archive : $1 view_earchive=You are not allowed to download archives view_earchmax=The selected directory is larger than the maximum allowed for archiving ($1 bytes) - paste_ecopy=You must cut or copy before pasting paste_egone=Copied file $1 no longer exists paste_eover=$1 cannot be overwritten paste_eself=You cannot paste a file over itself paste_emfailed=Move failed : $1 paste_ecfailed=Copy failed : $1 - over_title=File Exists over_msg=The file $1 already exists. Use the field below to enter a new filename for the pasted file. over_new=New filename: over_ok=Ok - upload_efailed=Failed to open upload : $1 upload_title=Upload File upload_file=File to upload @@ -198,11 +182,9 @@ upload_elink=Cannot upload to a symbolic link upload_zip=Uncompress ZIP or TAR file? upload_yes=Yes, then delete upload_user=Upload as user - find_eaccess=You are not allowed to access $1 find_eexist=$1 does not exist in $2 find_edir=$1 is not a directory in $2 - cancel=Cancel close=Close eopen=Download failed : $1 @@ -213,20 +195,15 @@ chmod_elink=symlink failed : $1 chmod_echown=chown failed : $1 chmod_echmod=chmod failed : $1 chmod_efollow=You are not allowed to edit symbolic links - copy_efrom=You are not allowed to copy from '$1' copy_eto=You are not allowed to copy to '$1' copy_elink=symlink failed : $1 - delete_eaccess=You are not allowed to delete '$1' delete_eroot=The directory '$1' is one of those that you are limited to, and so cannot be deleted - list_eaccess=You are not allowed to access this directory list_edir=Failed to list $1 : $2 - move_eto=You are not allowed to move to '$1' move_afrom=You are not allowed to move '$1' - acl_user=Access files on server as user acl_user_def=Same as Webmin login acl_umask=Umask for new files @@ -272,7 +249,6 @@ acl_noperms=Can change file permissions? acl_nousers=Can change file ownership? acl_filesystems=Can see filesystem mount points? acl_contents=Allow searching of file contents? - share_title=Sharing share_samba=Windows share_nfs=NFS @@ -301,7 +277,6 @@ share_s1=Trust non-root share_s2=Trust everybody share_lro=Read-only share_lrw=Read-write - log_create_export=Created NFS export $1 log_modify_export=Modified NFS export $1 log_delete_export=Deleted NFS export $1 @@ -319,7 +294,6 @@ log_move=Moved file $1 to $2 log_delete=Deleted file $1 log_attr=Set attributes on file $1 log_acl=Set ACL on file $1 - search_eaccess=You are not allowed to search this directory search_title=Find files search_ok=Search Now @@ -348,9 +322,7 @@ search_crit=Search criteria search_list=Search results search_down=Download search_edown=No search result file to download selected - facl_eaccess=You are not allowed to set ACLs for this file - attr_eattrs=Failed to get attributes : $1 attr_efs=The filesystem $1 does not support attributes attr_add=Add Attribute @@ -361,13 +333,11 @@ attr_title=File Attributes for $1 attr_create=Add Attribute attr_edit=Edit Attribute attr_ename=Missing attribute name - ext_eattrs=Failed to get EXT attributes : $1 ext_efs=The filesystem $1 does not support EXT attributes ext_title=EXT attributes for $1 ext_header=EXT file attributes ext_efailed=Failed to set attributes for $1 : $2 - eattr_A=Do not update access times eattr_a=Can only append to file eattr_c=Compress data on disk @@ -376,7 +346,6 @@ eattr_i=Do not allow modification eattr_s=Zero blocks when deleting eattr_S=Always sync after writing eattr_u=Save contents for undeletion - mount_eaccess=You are not allowed to mount filesystems mount_efstab=No filesystem exists at this mount point mount_epoint=$1 is not a mount point @@ -386,22 +355,18 @@ mount_err1=Failed to mount $1 : $2 mount_err2=Failed to un-mount $1 : $2 mount_title1=Mount filesystem mount_title2=Un-mount filesystem - zip_err=Could not extract file : $1 zip_ecmd=Missing $1 command zip_eunzip=Unzip failed : $1 zip_ename=Does not appear to be a zip, tar or tar.gz file zip_euntar=Un-tar failed : $1 zip_euntar2=Un-compress and un-tar failed : $1 - ddir_title=Download Directory ddir_rusure=To download the contents of $1 as an archive file, click on one of the archive type buttons below. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=This feature is not available - preview_etype=Could not work out file type for $1 preview_etype2=$1 is not in a supported image format preview_ecmd=The command $1 needed to scale this image is not installed @@ -409,17 +374,14 @@ preview_eimage=Only images can be previewed preview_title=Preview of $1 preview_bad=Could not load image to preview preview_egd=Failed to load image with GD - html_efailed=Failed to open HTML editor : $1 html_title=Edit HTML File html_title2=Create HTML File html_save=Save and Close html_err=Failed to save HTML file - history_title=Path History history_ok=Go To history_button=History - extract_etype=Only files can be extracted extract_title=Extract Compressed File extract_rusure=Are you sure you want to extract the compressed file : diff --git a/file/lang/hu.auto b/file/lang/hu.auto index 48c5f835a..6957273b9 100644 --- a/file/lang/hu.auto +++ b/file/lang/hu.auto @@ -1,4 +1,3 @@ info_apply4=A könyvtár és az alkönyvtárak fájljai info_apply5=Ez a könyvtár és az összes alkönyvtár - view_epathinfo=Az út érvénytelen karaktereket tartalmaz diff --git a/file/lang/it b/file/lang/it index 0557258e2..1098ef46f 100644 --- a/file/lang/it +++ b/file/lang/it @@ -3,7 +3,6 @@ index_nojava=Questo modulo richiede java per funzionare, il tuo browser non supp index_eremote=Non esiste un utente Unix corrispondente al nome utente Webmin $1. index_index=Torna alla pagina principale di Webmin. switch_euser=L'utente Unix non esiste! - top_ret=Indice top_down=Salva top_preview=Anteprima @@ -27,13 +26,11 @@ top_mount=Monta top_search=Cerca top_config=Configura top_efile=Nessun file selezionato - right_name=Nome right_size=Dimensione right_user=Utente right_group=Gruppo right_date=Data - edit_enormal=Puoi modificare solo file normali edit_title=Modifica di $1 edit_title2=Creazione file @@ -53,7 +50,6 @@ edit_notfound=Il testo $1 non è�stato trovato edit_saveclose=Salva ed esci edit_elength=Il file è troncato! edit_textmode=Passa alla modalità testo - info_file=File info_path=Percorso: info_type=Tipo: @@ -88,7 +84,6 @@ info_files=File totali: info_dirs=Cartelle totali: info_getsize=Calcola dimensione info_esize=Non è stato possibile calcolare la dimensione: $1 - eacl_eacls=Lettura ACL non riuscita: $1 eacl_acltype=Tipo ACL eacl_aclname=Applica a @@ -107,7 +102,6 @@ eacl_edefmask=Può esserci al massimo una maschera ACL di default eacl_title=ACL per $1 eacl_owner=Proprietario File eacl_edefaults=Se il file ha ACL di default, deve avere utente, gruppo e altre ACL di default - acltype_user=Utente acltype_group=Gruppo acltype_other=Altri @@ -116,7 +110,6 @@ acltype_default_user=Utente di default acltype_default_group=Gruppo di default acltype_default_other=Altri di default acltype_default_mask=Maschera di default - delete_mtitle=Eliminazione multipla di file delete_dtitle=Eliminazione cartella delete_ftitle=Eliminazione file @@ -124,13 +117,11 @@ delete_ddesc=Sei sicuro di voler eliminare definitivamente la cartella $1 e tutt delete_fdesc=Sei sicuro di voler eliminare definitivamente il file $1 ? delete_mdesc=Sei sicuro di voler eliminare definitivamente questi file e cartelle? delete_efailed=Eliminazione di $1 non riuscita: $2 - mkdir_title=Nuova cartella mkdir_dir=Nuova cartella: mkdir_eexists=$1 gi�esistentem mkdir_efailed=Creazione cartella non riuscita: $1 mkdir_eaccess=Non sei autorizzato a creare '$1' - link_title=Creazione Link link_from=Link da: link_to=Link a: @@ -139,7 +130,6 @@ link_efrom=Non sei autorizzato a fare un link da '$1' link_efailed=Link non riuscito : $1 link_efrom2=Non hai i permessi per collegarti da '$1' link_efollow=Non sei autorizzato a creare link simbolici - rename_title=Rinomina $1 rename_old=Vecchio nome: rename_new=Nuovo nome: @@ -149,7 +139,6 @@ rename_eslash=Il nuovo nome file per $1 contiene un / rename_efailed=Rinominazione non riuscita : $1 rename_eold=Non sei autorizzato a rinominare '$1' rename_enew=Non sei autorizzato a rinominare a '$1' - file_type0=Cartella file_type1=File di testo file_type2=File immagine @@ -158,30 +147,25 @@ file_type4=File file_type5=Link simbolico file_type6=File Device file_type7=Pipe - view_enormal=Possono essere visualizzati solo file normali view_enormal2=Possono essere scaricati solo file normali view_eaccess=Non sei autorizzato ad accedere $1 view_eopen=Apertura di $1 non riuscita : $2 - view_edir=Un archivio può essere creato solo per una cartella view_ecmd=Il comando $1 necessario per creare un archivio non è installato view_ecomp=Creazione dell'archivio non riuscita: $1 view_earchive=Non hai i permessi per scaricare gli archivi view_earchmax=La cartella selezionata ha una dimensione che supera quella massima permessa per gli archivi ($1 byte) - paste_ecopy=Devi tagliare o copiare prima di incollare paste_egone=Il file copiato $1 non esite pi paste_eover=$1 non può essere sovrascritto paste_eself=Non puoi incollare un file sopra se stesso paste_emfailed=Spostamento non riuscito : $1 paste_ecfailed=Copia non riuscita : $1 - over_title=Il File Esiste Gi�over_msg=Il file $1 esiste gi� Usa il campo qui sotto per inserire un nuovo nome per il file incollato. over_msg=Il file $1 è già esistente. Usa il campo in basso per inserire un nuovo nome per il file incollato. over_new=Nuovo nome: over_ok=Vai - upload_efailed=Inizio trasferimento non riuscito : $1 upload_title=Trasferisci file (upload) upload_file=File da trasferire @@ -198,11 +182,9 @@ upload_elink=Non è possibile fare l'upload ad un link simbolico upload_zip=Decomprimere il file ZIP o TAR? upload_yes=Si, quindi rimuovilo upload_user=Fai l'upload come utente - find_eaccess=Non sei autorizzato ad accedere $1 find_eexist=$1 non esiste in $2 find_edir=$1 non �una cartella in $2 - cancel=Annulla close=Chiudi eopen=Download non riuscito: $1 @@ -213,20 +195,15 @@ chmod_elink=Link simbolico non riuscito: $1 chmod_echown=chown non riuscito: $1 chmod_echmod=chmod non riuscito: $1 chmod_efollow=Non sei autorizzato a modificare link simbolici - copy_efrom=Non sei autorizzato a copiare da '$1' copy_eto=Non sei autorizzato a copiare in '$1' copy_elink=Link simbolico non riuscito: $1 - delete_eaccess=Non sei autorizzato a eliminare '$1' delete_eroot=La cartella '$1' è una di quelle su cui hai un accesso limitato, quindi non può essere rimossa - list_eaccess=Non sei autorizzato ad accedere questa cartella list_edir=Elenco di $1 non riuscito : $2 - move_eto=Non sei autorizzato a muovere in '$1' move_afrom=Non sei autorizzato a muovere '$1' - acl_user=Accesso file sul server come utente acl_user_def=Uguale al nome utente Webmin acl_umask=Umask per i nuovi file @@ -272,7 +249,6 @@ acl_noperms=Può modificare i permessi ai file? acl_nousers=Può cambiare il proprietario di un file? acl_filesystems=Può vedere i punti di montaggio dei filesystem? acl_contents=Permettere la ricerca di contenuti nel file? - share_title=Condivisione share_samba=Windows (Samba) share_nfs=NFS @@ -301,7 +277,6 @@ share_s1=Fidati degli utenti non-root share_s2=Fidati di tutti share_lro=Sola lettura share_lrw=Lettura scrittura - log_create_export=Creata esportazione NFS $1 log_modify_export=Modificata esportazione NFS $1 log_delete_export=Eliminata esportazione NFS $1 @@ -319,7 +294,6 @@ log_move=Spostato file $1 a $2 log_delete=Eliminato file $1 log_attr=Impostati attributi del file $1 log_acl=Impostati ACL al file $1 - search_eaccess=Non sei autorizzato a cercare questa cartella search_title=Cerca file search_ok=Esegui Ricerca @@ -348,9 +322,7 @@ search_crit=Criterio di ricerca search_list=Risultati ricerca search_down=Download search_edown=Non è stato selezionato nessun file di risultati delle ricerche da scaricare - facl_eaccess=Non sei autorizzato a impostare ACL per questo file - attr_eattrs=Lettura attributi non riuscita : $1 attr_efs=Il filesystem $1 non supporta attributi attr_add=Aggiungi Attributo @@ -361,13 +333,11 @@ attr_title=Attributi per $1 attr_create=Aggiungi Attributo attr_edit=Modifica Attributo attr_ename=Nome attributo mancante - ext_eattrs=Lettura attributi EXT non riuscita: $1 ext_efs=Il filesystem $1 non supporta attributi EXT ext_title=Attributi EXT per $1 ext_header=Attributi EXT ext_efailed=Impostazione degli attributi per $1 non riuscita: $2 - eattr_A=Non aggiornare il tempo di accesso eattr_a=Puoi solo appendere al file eattr_c=Dati compressi sul disco @@ -376,7 +346,6 @@ eattr_i=Non permettere modifiche eattr_s=Azzera blocchi in eliminazione eattr_S=Sync dopo la scrittura eattr_u=Salva il contenuto per de-eliminazione - mount_eaccess=Non sei autorizzato a montare filesystem mount_efstab=Non esiste filesystem in questo punto di montaggio mount_epoint=$1 non è un punto di montaggio @@ -386,22 +355,18 @@ mount_err1=Montaggio di $1 non riuscito : $2 mount_err2=Smontaggio di $1 non riuscito : $2 mount_title1=Monta filesystem mount_title2=Smonta filesystem - zip_err=Non è stato possibile estrarre il file: $1 zip_ecmd=Comando $1 mancante zip_eunzip=Estrazione ZIP non riuscita: $1 zip_ename=Non sembra essere un file di tipo ZIP, TAR o TAR.GZ zip_euntar=Estrazione TAR non riuscita: $1 zip_euntar2=Decompressione ed estrazione TAR non riuscita: $1 - ddir_title=Scarica cartella ddir_rusure=Per scaricare i contenuti di $1 come archivio clicca su uno dei pulsanti relativi al tipo di archivio desiderato ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Questa funzione non è disponibile - preview_etype=Impossibile determinare il tipo di file di $1 preview_etype2=$1 non è un formato di immagine supportato preview_ecmd=Il comando $1 necessario per ridimensionare l'immagine non è installato @@ -409,17 +374,14 @@ preview_eimage=E' possibile visualizzare l'anteprima solo per le immagini preview_title=Anteprima di $1 preview_bad=Non è stato possibile caricare l'immagine per l'anteprima preview_egd=Caricamento dell'immagine con GD non riuscito - html_efailed=Apertura dell'editor HTML non riuscita: $1 html_title=Modifica il file HTML html_title2=Crea file HTML html_save=Salva e chiudi html_err=Salvataggio del file HTML non riuscito - history_title=Cronologia dei percorsi history_ok=Vai a history_button=Cronologia - extract_etype=Sono i file possono essere estratti extract_title=Estrai file compresso extract_rusure=Sei sicuro di voler estrarre il file compresso: diff --git a/file/lang/it.auto b/file/lang/it.auto index e56b99984..539cf31d9 100644 --- a/file/lang/it.auto +++ b/file/lang/it.auto @@ -1,4 +1,3 @@ info_apply4=File in questa directory e sottodirectory info_apply5=Questa directory e tutte le sottodirectory - view_epathinfo=Il percorso contiene caratteri non validi diff --git a/file/lang/ja b/file/lang/ja index 698dbf34e..105eab1e3 100644 --- a/file/lang/ja +++ b/file/lang/ja @@ -1,6 +1,5 @@ index_title=ファイル マネージャ index_nojava=このモジュールは動作するのに Java を必要としますが、ご使用のブラウザは Java をサポートしていません - top_edit=編集 top_refresh=更新 top_info=情報 @@ -13,13 +12,11 @@ top_cut=カット top_paste=ペースト top_share=共有 top_search=検索 - right_name=ファイル名 right_size=サイズ right_user=ユーザ right_group=グループ right_date=日時 - edit_enormal=標準ファイルのみ編集できます edit_title=$1 を編集中 edit_title2=ファイルを作成中 @@ -27,7 +24,6 @@ edit_filename=ファイル名: edit_eover=$1 は上書きできません edit_esave=ファイルを保存できませんでした: $1 edit_eaccess='$1' を保存できません - info_file=ファイル info_path=パス: info_type=種類: @@ -55,19 +51,16 @@ info_read=読取り info_write=書込み info_list=リスト info_exec=実行 - delete_dtitle=ディレクトリの削除 delete_ftitle=ファイルの削除 delete_ddesc=ディレクトリ $1 とその内容を永久に削除してもよろしいですか？ delete_fdesc=ユーザ $1を永久に削除してもよろしいですか？ delete_efailed=$1 を削除できませんでした: $2 - mkdir_title=新規のディレクトリ mkdir_dir=新規のディレクトリ: mkdir_eexists=$1 はすでに存在します mkdir_efailed=ディレクトリを作成できませんでした: $1 mkdir_eaccess='$1' を作成できません - link_title=リンクの作成 link_from=リンク元: link_to=リンク先: @@ -75,7 +68,6 @@ link_eexists=$1 はすでに存在します link_efrom='$1' からリンクできません link_efailed=リンクできませんでした: $1 link_efollow=シンボリック リンクを作成できません - rename_title=$1 の名称変更 rename_old=古い名前: rename_new=新しい名前: @@ -84,7 +76,6 @@ rename_eexists=$1 というファイルはすでに存在しています rename_efailed=名前を変更できませんでした: $1 rename_eold='$1' の名前を変更できません rename_enew='$1' の名前を変更できません - file_type0=ディレクトリ file_type1=テキスト ファイル file_type2=画像ファイル @@ -93,23 +84,19 @@ file_type4=ファイル file_type5=シンボリック リンク file_type6=デバイス ファイル file_type7=パイプ - view_enormal=標準ファイルのみ表示できます view_eaccess=$1 にアクセスできません view_eopen=$1 を開けませんでした: $2 - paste_ecopy=ペーストする前にカットまたはコピーしてください paste_egone=コピーしたファイル $1 はもう存在しません paste_eover=$1 は上書きできません paste_eself=ファイルをそのファイル自身にペーストすることはできません paste_emfailed=移動できませんでした: $1 paste_ecfailed=コピーできませんでした: $1 - over_title=既存のファイル over_msg=ファイル $1 はすでに存在します。ペーストされたファイルの新規ファイル名を下のフィールドに入力してください。 over_new=新規のファイル名: over_ok=OK - upload_efailed=アップロードを開けませんでした: $1 upload_title=ファイルのアップロード upload_file=アップロードするファイル @@ -120,11 +107,9 @@ upload_efile=アップロードするファイルが選択されていません upload_edir=アップロードのディレクトリが存在しません。 upload_eperm=$1 を作成できません upload_ewrite=$1 に書き込めませんでした: $2. - find_eaccess=$1 にアクセスできません find_eexist=$1 は $2 には存在しません find_edir=$1 は $2 内のディレクトリではありません - cancel=キャンセル chmod_eaccess='$1' にアクセスできません chmod_euser=$1 : そのユーザは存在しません @@ -132,24 +117,18 @@ chmod_egroup=$1 : そのグループは存在しません chmod_elink=symlink が失敗しました: $1 chmod_echown=chown が失敗しました: $1 chmod_echmod=chmod が失敗しました: $1 - copy_efrom='$1' からはコピーできません copy_eto='$1' へはコピーできません copy_elink=symlink が失敗しました: $1 - delete_eaccess='$1' を削除できません - list_eaccess=このディレクトリにアクセスできません list_edir=$1 をリストできませんでした: $2 - move_eto='$1' へは移動できません move_afrom='$1' は移動できません - acl_user=サーバのファイルに次のユーザとしてアクセス acl_umask=新規ファイルの Umask acl_follow=symlink を常にたどりますか？ acl_dirs=次のディレクトリへのアクセスのみを許可 - share_title=共有 share_samba=Windows share_nfs=NFS @@ -178,7 +157,6 @@ share_s1=root 以外を信頼 share_s2=すべてのユーザを信頼 share_lro=読取り専用 share_lrw=読取り-書込み - log_create_export=NFS エクスポート $1 を作成しました log_modify_export=NFS エクスポート $1 を変更しました log_delete_export=NFS エクスポート$1 を削除しました @@ -194,7 +172,6 @@ log_relink=$2 へのシンボリック リンク $1 を変更しました log_copy=ファイル $1 を $2 にコピーしました log_move=ファイル $1 を $2 に移動しました log_delete=ファイル $1 を削除しました - search_eaccess=このディレクトリを検索できません search_title=ファイルの検索 search_ok=すぐに検索 diff --git a/file/lang/ja.auto b/file/lang/ja.auto index 1f02fe374..939be2617 100644 --- a/file/lang/ja.auto +++ b/file/lang/ja.auto @@ -1,7 +1,6 @@ index_eremote=Webminログイン $1に一致するUnixユーザーはいません。 index_index=Webminインデックスに戻ります。 switch_euser=Unixユーザーは存在しません！ - top_ret=索引 top_down=セーブ top_preview=プレビュー @@ -13,7 +12,6 @@ top_extract=エキス top_mount=マウント top_config=構成 top_efile=ファイルが選択されていません - edit_goto=後藤 edit_find=見つける edit_gotoline=行に移動 @@ -26,7 +24,6 @@ edit_notfound=テキスト $1が見つかりませんでした edit_saveclose=保存して閉じる edit_elength=ファイルは切り捨てられました！ edit_textmode=プレーンテキストモードに切り替える - info_octal=オクタル： info_apply4=このディレクトリとサブディレクトリの下のファイル info_apply5=このディレクトリとすべてのサブディレクトリ @@ -36,7 +33,6 @@ info_files=合計ファイル： info_dirs=合計ディレクトリ： info_getsize=サイズを取得 info_esize=サイズを取得できませんでした： $1 - eacl_eacls=ACLの読み取りに失敗しました： $1 eacl_acltype=ACLタイプ eacl_aclname=に適用 @@ -55,7 +51,6 @@ eacl_edefmask=デフォルトマスクACLエントリは1つしか存在でき eacl_title=$1のACL eacl_owner=ファイル所有者 eacl_edefaults=ファイルにデフォルトのACLがある場合、そのファイルにはデフォルトのユーザー、グループ、およびその他のACLが必要です。 - acltype_user=ユーザー acltype_group=グループ acltype_other=その他 @@ -64,14 +59,10 @@ acltype_default_user=デフォルトユーザー acltype_default_group=デフォルトグループ acltype_default_other=デフォルトのその他 acltype_default_mask=デフォルトのマスク - delete_mtitle=複数のファイルを削除する delete_mdesc=これらのファイルとディレクトリを完全に削除してもよろしいですか？ ： - link_efrom2=「$1」からのリンクは許可されていません - rename_eslash=新しいファイル名 $1には/が含まれています - view_enormal2=通常のファイルのみをダウンロードできます view_edir=アーカイブはディレクトリに対してのみ作成できます view_ecmd=アーカイブの作成に必要なコマンド $1がインストールされていません @@ -79,21 +70,16 @@ view_ecomp=アーカイブを作成できませんでした： $1 view_earchive=アーカイブをダウンロードすることはできません view_earchmax=選択したディレクトリは、アーカイブに許可されている最大値（$1バイト）よりも大きくなっています view_epathinfo=パスに無効な文字が含まれています - upload_euser=選択したユーザーは存在しません。 upload_already=ファイル $1は既に存在します。上書きしてもよろしいですか？ upload_elink=シンボリックリンクにアップロードできません upload_zip=ZIPまたはTARファイルを解凍しますか？ upload_yes=はい、削除します upload_user=ユーザーとしてアップロード - close=閉じる eopen=ダウンロードに失敗しました： $1 - chmod_efollow=シンボリックリンクを編集することはできません - delete_eroot=ディレクトリ「$1」は制限されているディレクトリの1つであるため、削除できません - acl_user_def=Webminログインと同じ acl_fyes=所有者が一致する場合 acl_ro=読み取り専用モード？ @@ -135,16 +121,12 @@ acl_noperms=ファイルのアクセス許可を変更できますか？ acl_nousers=ファイルの所有権を変更できますか？ acl_filesystems=ファイルシステムのマウントポイントを確認できますか？ acl_contents=ファイルの内容の検索を許可しますか？ - log_attr=ファイル $1に属性を設定します log_acl=ファイル $1にACLを設定します - search_cont=テキストを含む search_down=ダウンロード search_edown=ダウンロードする検索結果ファイルが選択されていません - facl_eaccess=このファイルにACLを設定することはできません - attr_eattrs=属性を取得できませんでした： $1 attr_efs=ファイルシステム $1は属性をサポートしていません attr_add=属性を追加 @@ -155,13 +137,11 @@ attr_title=$1のファイル属性 attr_create=属性を追加 attr_edit=属性を編集 attr_ename=属性名がありません - ext_eattrs=EXT属性の取得に失敗しました： $1 ext_efs=ファイルシステム $1はEXT属性をサポートしていません ext_title=$1のEXT属性 ext_header=EXTファイル属性 ext_efailed=$1の属性を設定できませんでした： $2 - eattr_A=アクセス時間を更新しない eattr_a=ファイルにのみ追加できます eattr_c=ディスク上のデータを圧縮する @@ -170,7 +150,6 @@ eattr_i=変更を許可しない eattr_s=削除するときにゼロブロック eattr_S=書き込み後に常に同期する eattr_u=削除のためにコンテンツを保存する - mount_eaccess=ファイルシステムをマウントすることは許可されていません mount_efstab=このマウントポイントにはファイルシステムが存在しません mount_epoint=$1はマウントポイントではありません @@ -180,22 +159,18 @@ mount_err1=$1のマウントに失敗しました： $2 mount_err2=$1をアンマウントできませんでした： $2 mount_title1=ファイルシステムのマウント mount_title2=ファイルシステムのマウント解除 - zip_err=ファイルを抽出できませんでした： $1 zip_ecmd=$1コマンドがありません zip_eunzip=解凍に失敗しました： $1 zip_ename=zip、tar、またはtar.gzファイルではないようです zip_euntar=解凍に失敗しました： $1 zip_euntar2=圧縮解除と圧縮解除に失敗しました： $1 - ddir_title=ダウンロードディレクトリ ddir_rusure=$1のコンテンツをアーカイブファイルとしてダウンロードするには、下のアーカイブタイプボタンのいずれかをクリックします。 ddir_zip=郵便番号 ddir_tgz=TAR.GZ ddir_tar=タール - ebutton=この機能は利用できません - preview_etype=$1のファイルタイプを解決できませんでした preview_etype2=$1はサポートされている画像形式ではありません preview_ecmd=このイメージのスケーリングに必要なコマンド $1はインストールされていません @@ -203,17 +178,14 @@ preview_eimage=画像のみをプレビューできます preview_title=$1のプレビュー preview_bad=プレビューする画像を読み込めませんでした preview_egd=GDで画像を読み込めませんでした - html_efailed=HTMLエディターを開けませんでした： $1 html_title=HTMLファイルを編集 html_title2=HTMLファイルを作成 html_save=保存して閉じます html_err=HTMLファイルを保存できませんでした - history_title=パス履歴 history_ok=に行く history_button=歴史 - extract_etype=ファイルのみを抽出できます extract_title=圧縮ファイルを抽出 extract_rusure=圧縮ファイルを解凍してもよろしいですか？ diff --git a/file/lang/ko b/file/lang/ko index a6c17ecbd..4a642bd21 100644 --- a/file/lang/ko +++ b/file/lang/ko @@ -3,7 +3,6 @@ index_nojava=이 모듈은 Java와 함께 사용해야 하지만 현재 브라 index_eremote=$1 Webmin 로그인과 매치되는 유닉스 계정이 없습니다. index_index=Webmin 인덱스로 돌아기기. switch_euser=유닉스 계정이 존재하지 않습니다! - top_ret=인덱스 top_down=저장 top_preview=미리보기 @@ -27,13 +26,11 @@ top_mount=마운트 top_search=찾기 top_config=설정 top_efile=선택된 파일이 없습니다. - right_name=이름 right_size=크기 right_user=사용자 right_group=그룹 right_date=날짜 - edit_enormal=일반 파일만 편집할 수 있습니다 edit_title=$1 편집 edit_title2=파일 작성 @@ -52,7 +49,6 @@ edit_efollow='$1' 심볼릭 링크를 쓸 권한이 없습니다. edit_notfound=$1 텍스트를 찾을 수 없습니다. edit_saveclose=저장후 닫기 edit_textmode=플레인 텍스트 모드로 전환 - info_file=파일 info_path=경로: info_type=유형: @@ -87,7 +83,6 @@ info_files=총 파일: info_dirs=총 디렉토리: info_getsize=크기 측정 info_esize=크기를 측정 실패 : $1 - eacl_eacls=ACL 읽기 실패 : $1 eacl_acltype=ACL 형식 eacl_aclname=적용 @@ -103,7 +98,6 @@ eacl_eowner=적용할 사용자 또는 그룹이 지정되어 있지 않습니 eacl_efailed=$1의 ACL 설정 실패 : $2 eacl_title=$1 ACL eacl_owner=파일 소유자 - acltype_user=유저 acltype_group=그룹 acltype_other=Others @@ -112,7 +106,6 @@ acltype_default_user=기본 유저 acltype_default_group=기본 그룹 acltype_default_other=기본 Others acltype_default_mask=기본 매스크 - delete_mtitle=여러 파일 삭제 delete_dtitle=디렉토리 삭제 delete_ftitle=파일 삭제 @@ -120,13 +113,11 @@ delete_ddesc=디렉토리 $1과(와) 그 안의 모든 파일을 영구적으로 delete_fdesc=파일 $1을(를) 영구적으로 삭제하시겠습니까? delete_mdesc=이 파일과 디렉토리를 영원히 삭제 하겠습니까? : delete_efailed=$1을(를) 삭제하지 못했습니다: $2 - mkdir_title=새 디렉토리 mkdir_dir=새 디렉토리: mkdir_eexists=$1이(가) 이미 있습니다 mkdir_efailed=디렉토리를 작성하지 못했습니다: $1 mkdir_eaccess='$1'을(를) 작성할 수 없습니다 - link_title=링크 작성 link_from=링크 소스: link_to=링크 대상: @@ -135,7 +126,6 @@ link_efrom='$1'에서 링크할 수 없습니다 link_efailed=링크 실패: $1 link_efrom2='$1'(으)로 링크할 권한이 없습니다. link_efollow=심볼릭 링크를 작성할 수 없습니다 - rename_title=$1 이름 바꾸기 rename_old=기존 이름: rename_new=새 이름: @@ -145,7 +135,6 @@ rename_eslash=새로 생성할 $1 파일 이름에 / 가 포함되어 있습니 rename_efailed=이름을 바꾸지 못했습니다: $1 rename_eold='$1'의 이름을 바꿀 수 없습니다 rename_enew='$1'(으)로 이름을 바꿀 수 없습니다 - file_type0=디렉토리 file_type1=텍스트 파일 file_type2=이미지 파일 @@ -154,30 +143,25 @@ file_type4=파일 file_type5=심볼릭 링크 file_type6=장치 파일 file_type7=파이프 - view_enormal=일반 파일만 볼 수 있습니다 view_enormal2=정규 파일만 다운로드할 수 있습니다. view_eaccess=$1에 접근할 수 없습니다 view_eopen=$1을(를) 열지 못했습니다: $2 - view_edir=압축 파일은 디렉토리에 대해서만 생성할 수 있습니다. view_ecmd=압축을 하기 위한 $1 명령이 설치되어 있지 않습니다. view_ecomp=압축 생성 실패 : $1 view_earchive=압축 다운로드 권한이 없습니다. view_earchmax=선택된 디렉토리는 최대 압축 사이즈보다 큽니다. ($1 byte) - paste_ecopy=붙여넣기 전에 잘라내거나 복사해야 합니다 paste_egone=복사한 파일 $1(이)가 더 이상 존재하지 않습니다 paste_eover=$1은(는) 덮어쓸 수 없습니다 paste_eself=같은 파일에는 붙여넣을 수 없습니다 paste_emfailed=이동하지 못했습니다: $1 paste_ecfailed=복사하지 못했습니다: $1 - over_title=파일 존재 over_msg=파일 $1이(가) 이미 있습니다. 붙여넣은 파일의 새 이름을 아래의 필드에 입력하십시오. over_new=새 파일 이름: over_ok=확인 - upload_efailed=업로드할 파일을 열지 못했습니다: $1 upload_title=파일 업로드 upload_file=업로드할 파일 @@ -194,11 +178,9 @@ upload_elink=심볼릭 링크에 업로드 할 수 없습니다. upload_zip=ZIP/TAR 파일의 압축을 풀겠습니까? upload_yes=예, 그리고 삭제 upload_user=다음 사용자로 업로드 - find_eaccess=$1에 액세스할 수 없습니다 find_eexist=$2에 $1이(가) 존재하지 않습니다 find_edir=$1은(는) $2의 디렉토리가 아닙니다 - cancel=취소 close=닫기 eopen=다운로드 실패 : $1 @@ -209,20 +191,15 @@ chmod_elink=심볼릭 링크 실패: $1 chmod_echown=chown 실패: $1 chmod_echmod=chmod 실패: $1 chmod_efollow=심볼릭 링크를 수정할 수 없습니다. - copy_efrom='$1'에서 복사할 수 없습니다 copy_eto='$1'에 복사할 수 없습니다 copy_elink=심볼릭 링크 실패: $1 - delete_eaccess='$1'을(를) 삭제할 수 없습니다 delete_eroot='$1' 디렉토리는 제한을 한것 중의 하나여서 삭제할 수 없습니다. - list_eaccess=이 디렉토리에 접근할 수 없습니다 list_edir=$1을(를) 나열하지 못했습니다: $2 - move_eto='$1'(으)로 이동할 수 없습니다 move_afrom='$1'을(를) 이동할 수 없습니다 - acl_user=사용자로서 서버 파일에 접근 acl_user_def=Webmin 로그인과 동일하게 acl_umask=새 파일의 Umask @@ -267,7 +244,6 @@ acl_noperms=파일 권한을 변경하겠습니까? acl_nousers=파일 소유권을 변경하겠습니까? acl_filesystems=파일 시스템 마운트 포인트를 보겠습니까? acl_contents=파일 컨텐츠 검색을 하겠습니까? - share_title=공유 share_samba=윈도우 share_nfs=NFS @@ -296,7 +272,6 @@ share_s1=root외 사용자 신뢰 share_s2=모든 사용자 신뢰 share_lro=읽기 전용 share_lrw=읽기/쓰기 - log_create_export=NFS 내보내기 $1 작성됨 log_modify_export=NFS 내보내기 $1 수정됨 log_delete_export=NFS 내보내기 $1 삭제됨 @@ -314,7 +289,6 @@ log_move=$2(으)로 파일 $1 이동됨 log_delete=파일 $1 삭제됨 log_attr=$1 파일 속성 설정 log_acl=$1 파일 ACL 설정 - search_eaccess=이 디렉토리를 검색할 수 없습니다 search_title=파일 찾기 search_ok=지금 검색 @@ -343,9 +317,7 @@ search_crit=검색 기준 search_list=검색 결과 search_down=다운로드 search_edown=다운로드 하기 위해 선택한 파일을 찾을 수가 없습니다. - facl_eaccess=이 파일에 대한 ACL 설정 권한이 없습니다. - attr_eattrs=속성 가져오기 실패 : $1 attr_efs=$1 파일시스템은 속성을 지원하지 않습니다. attr_add=속성 추가 @@ -356,13 +328,11 @@ attr_title=$1 속성 파일 attr_create=속성 추가 attr_edit=속성 편집 attr_ename=속성 이름이 지정되지 않았습니다. - ext_eattrs=EXT 속성 가져오기 실패 : $1 ext_efs=$1 파일 시스템은 EXT 속성을 지원하지 않습니다. ext_title=$1의 EXT 속성 ext_header=EXT 파일 속성 ext_efailed=$1의 속성 설정 실패 : $2 - eattr_A=접근 시간을 업데이트 할 수 없습니다. eattr_a=파일에만 추가할 수 있습니다. eattr_c=디스크에 데이타 압축 @@ -370,7 +340,6 @@ eattr_d=dump로 백업하지 않음 eattr_i=수정 권한이 없습니다. eattr_S=쓰기 후에 항상 sync eattr_u=복구를 위한 컨텐츠 저장 - mount_eaccess=파일 시스템 마운트 권한이 없습니다. mount_efstab=이 파운트 포인트에 파일 시스템이 존재하지 않습니다. mount_epoint=$1은(는) 마운트 포인트가 아닙니다. @@ -380,22 +349,18 @@ mount_err1=$1 마운트 실패 : $2 mount_err2=$1 언마운트 실패 : $2 mount_title1=파일 시스템 마운트 mount_title2=파일 시스템 언마운트 - zip_err=파일을 추출할 수 없음 : $1 zip_ecmd=$1 명령이 누락 되었습니다. zip_eunzip=Unzip 실패 : $1 zip_ename=zip, tar 또는 tar.gz 형식이 아닙니다. zip_euntar=tar 압축 해재 실패 : $1 zip_euntar2=압축 해제 실패 : $1 - ddir_title=다운로드 디렉토리 ddir_rusure=압축 파일로 $1의 내용물을 다운받으려면 다음의 압축 형식 중의 하나를 선택 하십시오. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=이 요소는 불가능 합니다. - preview_etype=$1의 파일 형식을 알 수가 없습니다. preview_etype2=$1 파일은 지원되는 이미지 형식이 아닙니다. preview_ecmd=이미지 비율 조정을 위한 $1 명령이 설치되어 있지 않습니다. @@ -403,17 +368,14 @@ preview_eimage=이미지만 미리보기를 할 수 있습니다. preview_title=$1 미리보기 preview_bad=이미지 미리보기를 할 수 없습니다. preview_egd=GD로 이미지를 출력할 수 없습니다. - html_efailed=HTML 편집기 열기 실패 : $1 html_title=HTML 파일 편집 html_title2=HTML 파일 생성 html_save=저장 후 닫기 html_err=HTML 파일 저장 실패 - history_title=히스토리 경로 history_ok=이동 : history_button=히스토리 - extract_etype=파일만 압축 해제가 가능합니다. extract_title=압축 파일 해제 extract_rusure=압축 파일을 해제하겠습니까 : diff --git a/file/lang/ko.auto b/file/lang/ko.auto index b7afe515d..62f00e0ae 100644 --- a/file/lang/ko.auto +++ b/file/lang/ko.auto @@ -1,18 +1,12 @@ edit_elength=파일이 잘 렸습니다! - info_apply4=이 디렉토리 및 서브 디렉토리에있는 파일 info_apply5=이 디렉토리와 모든 하위 디렉토리 - eacl_emask=최대 하나의 마스크 ACL 항목이있을 수 있습니다 eacl_edefmask=최대 하나의 기본 마스크 ACL 항목이있을 수 있습니다 eacl_edefaults=파일에 기본 ACL이 있으면 기본 사용자, 그룹 및 기타 ACL이 있어야합니다. - view_epathinfo=경로에 유효하지 않은 문자가 포함되어 있습니다 - acl_relto=(모든 chroot 디렉토리에 상대적) - eattr_s=삭제할 때 제로 블록 - extract_show=내용보기 extract_err2=파일 내용을 가져 오지 못했습니다 : $1 extract_shown=압축 파일의 내용 diff --git a/file/lang/lt.auto b/file/lang/lt.auto index 6fbe992c8..9765b2ed4 100644 --- a/file/lang/lt.auto +++ b/file/lang/lt.auto @@ -3,7 +3,6 @@ index_nojava=Šis modulis reikalauja, kad „Java“ veiktų, tačiau jūsų nar index_eremote=Nėra „Unix“ vartotojo, atitinkančio prisijungimą prie „Webmin“ $1. index_index=Grįžkite į „Webmin“ rodyklę. switch_euser=„Unix“ vartotojo nėra! - top_ret=Indeksas top_down=Sutaupyti top_preview=Peržiūra @@ -27,13 +26,11 @@ top_mount=Kalnas top_search=Rasti top_config=Konfigūruoti top_efile=Nepasirinktas failas - right_name=vardas right_size=Dydis right_user=Vartotojas right_group=Grupė right_date=Data - edit_enormal=Redaguoti gali tik įprastus failus edit_title=Redaguoti $1 edit_title2=Kuriamas failas @@ -53,7 +50,6 @@ edit_notfound=Tekstas $1 nerastas edit_saveclose=Išsaugoti ir uždaryti edit_elength=Failas buvo sutrumpintas! edit_textmode=Perjungti į paprasto teksto režimą - info_file=Byla info_path=Kelias: info_type=Tipas: @@ -90,7 +86,6 @@ info_files=Iš viso failų: info_dirs=Iš viso katalogų: info_getsize=Gaukite dydį info_esize=Nepavyko gauti dydžių : $1 - eacl_eacls=Nepavyko nuskaityti ACL : $1 eacl_acltype=ACL tipas eacl_aclname=Rašyti paraišką į @@ -109,7 +104,6 @@ eacl_edefmask=Gali būti ne daugiau kaip vienas numatytasis kaukės ACL įrašas eacl_title=ACL $1 eacl_owner=Failo savininkas eacl_edefaults=Jei faile yra numatytasis ACL, jame turi būti numatytasis vartotojo, grupės ir kiti ACL. - acltype_user=Vartotojas acltype_group=Grupė acltype_other=Kiti @@ -118,7 +112,6 @@ acltype_default_user=Numatytasis vartotojas acltype_default_group=Numatytoji grupė acltype_default_other=Numatytasis Kiti acltype_default_mask=Numatytoji kaukė - delete_mtitle=Ištrinkite kelis failus delete_dtitle=Ištrinti katalogą delete_ftitle=Ištrinti failą @@ -126,13 +119,11 @@ delete_ddesc=Ar tikrai norite visam laikui ištrinti katalogą $1 ir visą jo tu delete_fdesc=Ar tikrai norite visam laikui ištrinti failą $1 ? delete_mdesc=Ar tikrai norite visam laikui ištrinti šiuos failus ir katalogus? : delete_efailed=Nepavyko ištrinti $1 : $2 - mkdir_title=Naujas katalogas mkdir_dir=Naujas katalogas: mkdir_eexists=$1 jau yra mkdir_efailed=Sukurti katalogą nepavyko : $1 mkdir_eaccess=Jums neleidžiama kurti „$1“ - link_title=Sukurti nuorodą link_from=Nuoroda iš: link_to=Nuoroda į: @@ -141,7 +132,6 @@ link_efrom=Nuorodos šaltinis turi būti absoliutus kelias link_efailed=Nepavyko susieti : $1 link_efrom2=Jums neleidžiama susieti iš „$1“ link_efollow=Jums neleidžiama kurti saitų - rename_title=Pervardyti $1 rename_old=Senas vardas: rename_new=Naujas vardas: @@ -151,7 +141,6 @@ rename_eslash=Naujame failo pavadinime $1 yra / rename_efailed=Pervardyti nepavyko : $1 rename_eold=Jums neleidžiama pervardyti „$1“ rename_enew=Jums neleidžiama pervardyti į „$1“ - file_type0=Katalogas file_type1=Tekstinis failas file_type2=Vaizdo failas @@ -160,31 +149,26 @@ file_type4=Byla file_type5=Simbolinis saitas file_type6=Įrenginio failas file_type7=Vamzdis - view_enormal=Galima žiūrėti tik įprastus failus view_enormal2=Galima atsisiųsti tik įprastus failus view_eaccess=Jums neleidžiama patekti į $1 view_eopen=Nepavyko atidaryti $1 : $2 - view_edir=Archyvą galima sukurti tik aplankui view_ecmd=Komanda $1, reikalinga archyvui sukurti, neįdiegta view_ecomp=Nepavyko sukurti archyvo : $1 view_earchive=Jums neleidžiama atsisiųsti archyvų view_earchmax=Pasirinktas katalogas yra didesnis už maksimalų leidžiamą archyvuoti ($1 baitai) view_epathinfo=Kelias apima netinkamus simbolius - paste_ecopy=Prieš įklijuodami turite iškirpti arba nukopijuoti paste_egone=Nukopijuotas failas $1 neegzistuoja paste_eover=$1 negalima perrašyti paste_eself=Negalite įklijuoti failo paste_emfailed=Perkelti nepavyko : $1 paste_ecfailed=Kopija nepavyko : $1 - over_title=Byla egzistuoja over_msg=Failas $1 jau yra. Norėdami įvesti naują įklijuoto failo pavadinimą, naudokite žemiau esantį lauką. over_new=Naujas failo vardas: over_ok=Gerai - upload_efailed=Nepavyko atidaryti įkėlimo : $1 upload_title=Įkelti failą upload_file=Įkelti failą @@ -201,11 +185,9 @@ upload_elink=Neįmanoma įkelti į simbolinę nuorodą upload_zip=Atspausti ZIP arba TAR failą? upload_yes=Taip, tada ištrinkite upload_user=Įkelkite kaip vartotoją - find_eaccess=Jums neleidžiama patekti į $1 find_eexist=$1 neegzistuoja $2 find_edir=$1 nėra katalogas $2 - cancel=Atšaukti close=Uždaryti eopen=Atsisiųsti nepavyko : $1 @@ -216,20 +198,15 @@ chmod_elink=nuoroda nepavyko : $1 chmod_echown=chown nepavyko : $1 chmod_echmod=chmod nepavyko : $1 chmod_efollow=Jums neleidžiama redaguoti simbolinių nuorodų - copy_efrom=Jums neleidžiama kopijuoti iš „$1“ copy_eto=Jums neleidžiama kopijuoti į „$1“ copy_elink=nuoroda nepavyko : $1 - delete_eaccess=Jums neleidžiama ištrinti „$1“ delete_eroot=Katalogas „$1“ yra vienas iš tų, kuriuose esate apribotas, todėl jo negalima ištrinti - list_eaccess=Jums neleidžiama patekti į šį katalogą list_edir=Nepavyko pateikti $1 sąrašo : $2 - move_eto=Jums neleidžiama persikelti į „$1“ move_afrom=Jums neleidžiama judėti „$1“ - acl_user=Prisijunkite prie serverio failų kaip vartotojas acl_user_def=Tas pats, kas prisijungti prie „Webmin“ acl_umask=Umask naujų failų @@ -275,7 +252,6 @@ acl_noperms=Ar galima pakeisti failo teises? acl_nousers=Ar galima pakeisti failo nuosavybę? acl_filesystems=Ar galite pamatyti failų sistemos prijungimo taškus? acl_contents=Leisti ieškoti failo turinio? - share_title=Dalijimasis share_samba=„Windows“ share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Pasitikėk ne šaknimi share_s2=Pasitikėk visais share_lro=Tik skaitymui share_lrw=Skaityk rašyk - log_create_export=Sukurtas NFS eksportas $1 log_modify_export=Modifikuotas NFS eksportas $1 log_delete_export=Ištrintas NFS eksportas $1 @@ -322,7 +297,6 @@ log_move=Perkeltas failas nuo $1 iki $2 log_delete=Ištrintas failas $1 log_attr=Nustatykite failo $1 atributus log_acl=Nustatykite ACL faile $1 - search_eaccess=Jums neleidžiama ieškoti šiame kataloge search_title=Rasti failus search_ok=Ieškokite dabar @@ -351,9 +325,7 @@ search_crit=Paieškos Reikalavimai search_list=Paieškos rezultatai search_down=parsisiųsti search_edown=Nepasirinktas paieškos rezultatų failas - facl_eaccess=Jums neleidžiama nustatyti šio failo ACL - attr_eattrs=Nepavyko gauti atributų : $1 attr_efs=Failo sistema $1 nepalaiko atributų attr_add=Pridėti atributą @@ -364,13 +336,11 @@ attr_title=$1 failo atributai attr_create=Pridėti atributą attr_edit=Redaguoti atributą attr_ename=Trūksta atributo pavadinimo - ext_eattrs=Nepavyko gauti EXT atributų : $1 ext_efs=Failo sistema $1 nepalaiko EXT atributų ext_title=$1 atributai EXT ext_header=EXT failo atributai ext_efailed=Nepavyko nustatyti atributų $1 : $2 - eattr_A=Neatnaujinkite prieigos laikų eattr_a=Galima tik pridėti prie bylos eattr_c=Suspauskite duomenis diske @@ -379,7 +349,6 @@ eattr_i=Neleiskite modifikuoti eattr_s=Nulis blokuojamas ištrinant eattr_S=Rašydami visada sinchronizuokite eattr_u=Išsaugokite turinį norėdami pašalinti - mount_eaccess=Jums neleidžiama montuoti failų sistemų mount_efstab=Šiame prijungimo taške nėra failų sistemos mount_epoint=„ $1 “ nėra prijungimo taškas @@ -389,22 +358,18 @@ mount_err1=Nepavyko prijungti $1 : $2 mount_err2=Nepavyko išmontuoti $1 : $2 mount_title1=Prijunkite failų sistemą mount_title2=Pašalinti failų sistemą - zip_err=Nepavyko išgauti failo : $1 zip_ecmd=Trūksta komandos $1 zip_eunzip=Nepavyko išpakuoti : $1 zip_ename=Neatrodo, kad tai yra ZIP, tar arba tar.gz failai zip_euntar=Nepavyko pašalinti deguto : $1 zip_euntar2=Nepavyko suspausti ir pašalinti deguto : $1 - ddir_title=Atsisiųsti katalogą ddir_rusure=Norėdami atsisiųsti $1 turinį kaip archyvo failą, spustelėkite vieną iš žemiau esančių archyvo tipo mygtukų. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Ši funkcija negalima - preview_etype=Nepavyko išsiaiškinti $1 failo tipo preview_etype2=$1 nepalaikomas atvaizdo formatas preview_ecmd=Komanda $1, reikalinga šiam vaizdui padidinti, neįdiegta @@ -412,17 +377,14 @@ preview_eimage=Galima peržiūrėti tik vaizdus preview_title=$1 peržiūra preview_bad=Nepavyko įkelti vaizdo peržiūrėti preview_egd=Nepavyko įkelti vaizdo į GD - html_efailed=Nepavyko atidaryti HTML redaktoriaus : $1 html_title=Redaguoti HTML failą html_title2=Sukurkite HTML failą html_save=Išsaugoti ir uždaryti html_err=Nepavyko išsaugoti HTML failo - history_title=Kelio istorija history_ok=Eiti į history_button=Istorija - extract_etype=Išgauti galima tik failus extract_title=Išskleisti suspaustą failą extract_rusure=Ar tikrai norite išgauti suglaudintą failą : diff --git a/file/lang/lv.auto b/file/lang/lv.auto index 38774c417..dfe1270c7 100644 --- a/file/lang/lv.auto +++ b/file/lang/lv.auto @@ -3,7 +3,6 @@ index_nojava=Šim modulim ir nepieciešama Java, lai darbotos, bet jūsu pārlū index_eremote=Neviens Unix lietotājs neatbilst Webmin pieteikuminformācijai $1. index_index=Atgriezties Webmin rādītājā. switch_euser=Unix lietotājs neeksistē! - top_ret=Indekss top_down=Saglabāt top_preview=Priekšskatījums @@ -27,13 +26,11 @@ top_mount=Kalns top_search=Atrodi top_config=Konfigurēt top_efile=Nav atlasīts neviens fails - right_name=Vārds right_size=Izmērs right_user=Lietotājs right_group=Grupa right_date=Datums - edit_enormal=Rediģēt var tikai parastos failus edit_title=Rediģēšana $1 edit_title2=Notiek faila izveidošana @@ -53,7 +50,6 @@ edit_notfound=Teksts $1 netika atrasts edit_saveclose=Saglabāt un aizvērt edit_elength=Fails tika saīsināts! edit_textmode=Pārslēgties uz vienkārša teksta režīmu - info_file=Fails info_path=Ceļš: info_type=Tips: @@ -90,7 +86,6 @@ info_files=Kopējais failu skaits: info_dirs=Kopējais direktoriju skaits: info_getsize=Iegūt izmēru info_esize=Neizdevās iegūt izmērus : $1 - eacl_eacls=Neizdevās nolasīt ACL : $1 eacl_acltype=ACL tips eacl_aclname=Pieteikties @@ -109,7 +104,6 @@ eacl_edefmask=Var būt ne vairāk kā viens noklusējuma maskas ACL ieraksts eacl_title=ACL $1 eacl_owner=Faila īpašnieks eacl_edefaults=Ja failam ir noklusējuma ACL, tam jābūt noklusējuma lietotājam, grupai un citiem ACL. - acltype_user=Lietotājs acltype_group=Grupa acltype_other=Citi @@ -118,7 +112,6 @@ acltype_default_user=Noklusētais lietotājs acltype_default_group=Noklusējuma grupa acltype_default_other=Noklusējums Citi acltype_default_mask=Noklusējuma maska - delete_mtitle=Dzēst vairākus failus delete_dtitle=Dzēst direktoriju delete_ftitle=Izdzēst failu @@ -126,13 +119,11 @@ delete_ddesc=Vai tiešām vēlaties neatgriezeniski izdzēst direktoriju $1 un v delete_fdesc=Vai tiešām vēlaties neatgriezeniski izdzēst failu $1 ? delete_mdesc=Vai tiešām vēlaties neatgriezeniski izdzēst šos failus un direktorijus? : delete_efailed=Neizdevās izdzēst $1 : $2 - mkdir_title=Jauns direktorijs mkdir_dir=Jauns katalogs: mkdir_eexists=$1 jau pastāv mkdir_efailed=Neizdevās izveidot direktoriju : $1 mkdir_eaccess=Jums nav atļauts izveidot “$1” - link_title=Izveidot saiti link_from=Saite no: link_to=Saite uz: @@ -141,7 +132,6 @@ link_efrom=Saites avotam jābūt absolūtam ceļam link_efailed=Saite neizdevās : $1 link_efrom2=Jums nav atļauts izveidot saiti no '$1' link_efollow=Jums nav atļauts izveidot saiknes - rename_title=Pārdēvēt $1 rename_old=Vecais nosaukums: rename_new=Jauns nosaukums: @@ -151,7 +141,6 @@ rename_eslash=Jaunajā faila nosaukumā $1 ir / rename_efailed=Pārdēvēt neizdevās : $1 rename_eold=Jums nav atļauts pārdēvēt “$1” rename_enew=Jums nav atļauts pārdēvēt par “$1” - file_type0=Katalogs file_type1=Teksta fails file_type2=Attēla fails @@ -160,31 +149,26 @@ file_type4=Fails file_type5=Simboliska saite file_type6=Ierīces fails file_type7=Caurule - view_enormal=Var apskatīt tikai parastos failus view_enormal2=Var lejupielādēt tikai parastos failus view_eaccess=Jums nav atļauts piekļūt $1 view_eopen=Neizdevās atvērt $1 : $2 - view_edir=Arhīvu var izveidot tikai direktorijai view_ecmd=Komanda $1, kas nepieciešama arhīva izveidošanai, nav instalēta view_ecomp=Neizdevās izveidot arhīvu : $1 view_earchive=Jums nav atļauts lejupielādēt arhīvus view_earchmax=Atlasītais direktorijs ir lielāks par maksimālo pieļaujamo arhivēšanai ($1 baiti) view_epathinfo=Ceļš satur nederīgas rakstzīmes - paste_ecopy=Pirms ielīmēšanas jums tas jāsagriež vai jākopē paste_egone=Kopētais fails $1 vairs nepastāv paste_eover=$1 nevar pārrakstīt paste_eself=Nevar ielīmēt failu pats par sevi paste_emfailed=Pārvietot neizdevās : $1 paste_ecfailed=Kopēt neizdevās : $1 - over_title=Fails pastāv over_msg=Fails $1 jau pastāv. Izmantojiet zemāk esošo lauku, lai ievadītu ielīmētā faila jaunu faila nosaukumu. over_new=Jauns faila nosaukums: over_ok=Labi - upload_efailed=Neizdevās atvērt augšupielādi : $1 upload_title=Augšupielādēt failu upload_file=Augšupielādējamais fails @@ -201,11 +185,9 @@ upload_elink=Nevar augšupielādēt simboliskā saitē upload_zip=Vai atspiest ZIP vai TAR failu? upload_yes=Jā, pēc tam izdzēst upload_user=Augšupielādēt kā lietotāju - find_eaccess=Jums nav atļauts piekļūt $1 find_eexist=$1 neeksistē $2 find_edir=$1 nav direktorijs $2 - cancel=Atcelt close=Aizveriet eopen=Lejupielāde neizdevās : $1 @@ -216,20 +198,15 @@ chmod_elink=neizdevās izveidot saiti : $1 chmod_echown=chown neizdevās : $1 chmod_echmod=chmod neizdevās : $1 chmod_efollow=Jums nav atļauts rediģēt simboliskas saites - copy_efrom=Jums nav atļauts kopēt no “$1” copy_eto=Jums nav atļauts kopēt uz “$1” copy_elink=neizdevās izveidot saiti : $1 - delete_eaccess=Jums nav atļauts dzēst “$1” delete_eroot=Mape '$1' ir viena no tām, kurā jūs esat ierobežots, tāpēc to nevar izdzēst - list_eaccess=Jums nav atļauts piekļūt šim direktorijam list_edir=Neizdevās uzskaitīt $1 : $2 - move_eto=Jums nav atļauts pārcelties uz “$1” move_afrom=Jums nav atļauts pārvietot “$1” - acl_user=Piekļūstiet servera failiem kā lietotājam acl_user_def=Tas pats, kas Webmin pieteikšanās acl_umask=Umask jauniem failiem @@ -275,7 +252,6 @@ acl_noperms=Vai var mainīt faila atļaujas? acl_nousers=Vai var mainīt faila īpašumtiesības? acl_filesystems=Vai var redzēt failu sistēmas pievienošanas punktus? acl_contents=Vai atļaut meklēt faila saturu? - share_title=Dalīšanās share_samba=Windows share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Uzticieties bez saknes share_s2=Uzticies visiem share_lro=Tikai lasīt share_lrw=Lasīt rakstīt - log_create_export=Izveidots NFS eksports $1 log_modify_export=Modificēts NFS eksports $1 log_delete_export=Izdzēsts NFS eksports $1 @@ -322,7 +297,6 @@ log_move=Pārvietots fails no $1 uz $2 log_delete=Izdzēsts fails $1 log_attr=Iestatiet atribūtus failā $1 log_acl=Iestatiet ACL failā $1 - search_eaccess=Jums nav atļauts meklēt šajā direktorijā search_title=Atrodiet failus search_ok=Meklēt tagad @@ -351,9 +325,7 @@ search_crit=Meklēšanas kritēriji search_list=Meklēšanas rezultāti search_down=Lejupielādēt search_edown=Nav atlasīta meklēšanas rezultāta faila - facl_eaccess=Jums nav atļauts iestatīt šī faila ACL - attr_eattrs=Neizdevās iegūt atribūtus : $1 attr_efs=Failu sistēma $1 neatbalsta atribūtus attr_add=Pievienot atribūtu @@ -364,13 +336,11 @@ attr_title=$1 faila atribūti attr_create=Pievienot atribūtu attr_edit=Rediģēt atribūtu attr_ename=Trūkst atribūta nosaukuma - ext_eattrs=Neizdevās iegūt atribūtus EXT : $1 ext_efs=Failu sistēma $1 neatbalsta EXT atribūtus ext_title=$1 atribūti EXT ext_header=EXT faila atribūti ext_efailed=Neizdevās iestatīt atribūtus $1 : $2 - eattr_A=Neatjauniniet piekļuves laikus eattr_a=Var pievienot tikai failam eattr_c=Saspiest datus diskā @@ -379,7 +349,6 @@ eattr_i=Neļauj modificēt eattr_s=Dzēšot nulles bloķē eattr_S=Pēc rakstīšanas vienmēr sinhronizējiet eattr_u=Saglabājiet saturu atcelšanai - mount_eaccess=Jums nav atļauts uzstādīt failu sistēmas mount_efstab=Šajā piestiprināšanas vietā nav failu sistēmas mount_epoint=$1 nav pievienošanas punkts @@ -389,22 +358,18 @@ mount_err1=Neizdevās uzstādīt $1 : $2 mount_err2=Neizdevās noņemt $1 : $2 mount_title1=Pievienojiet failu sistēmu mount_title2=Atspraust failu sistēmu - zip_err=Nevarēja iegūt failu : $1 zip_ecmd=Trūkst komandas $1 zip_eunzip=Izkodēšana neizdevās : $1 zip_ename=Šķiet, ka tas nav zip, darvas vai tar.gz fails zip_euntar=Atjaunot darvu neizdevās : $1 zip_euntar2=Neizdevās atspiest un atbrīvot darvu : $1 - ddir_title=Lejupielādēt direktoriju ddir_rusure=Lai lejupielādētu $1 saturu kā arhīva failu, noklikšķiniet uz vienas no zemāk esošajām arhīva veida pogām. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Šī funkcija nav pieejama - preview_etype=Nevarēja noteikt faila tipu $1 preview_etype2=$1 nav atbalstīta attēla formātā preview_ecmd=Komanda $1, kas nepieciešama šī attēla mērogošanai, nav instalēta @@ -412,17 +377,14 @@ preview_eimage=Priekšskatīt var tikai attēlus preview_title=$1 priekšskatījums preview_bad=Nevarēja ielādēt attēlu priekšskatīšanai preview_egd=Neizdevās ielādēt attēlu ar GD - html_efailed=Neizdevās atvērt HTML redaktoru : $1 html_title=Rediģēt HTML failu html_title2=Izveidot HTML failu html_save=Saglabāt un aizvērt html_err=Neizdevās saglabāt HTML failu - history_title=Ceļa vēsture history_ok=Iet uz history_button=Vēsture - extract_etype=Var iegūt tikai failus extract_title=Izņemt saspiestu failu extract_rusure=Vai tiešām vēlaties iegūt saspiestu failu : diff --git a/file/lang/ms.auto b/file/lang/ms.auto index 3d41f0669..25ce9377f 100644 --- a/file/lang/ms.auto +++ b/file/lang/ms.auto @@ -3,7 +3,6 @@ index_nojava=Modul ini memerlukan Java berfungsi, tetapi pelayar anda tidak meny index_eremote=Tiada pengguna Unix yang memadankan login Webmin $1. index_index=Kembali ke indeks Webmin. switch_euser=Pengguna Unix tidak wujud! - top_ret=Indeks top_down=Simpan top_preview=Pratonton @@ -27,13 +26,11 @@ top_mount=Gunung top_search=Cari top_config=Config top_efile=Tiada fail yang dipilih - right_name=Nama right_size=Saiz right_user=Pengguna right_group=Kumpulan right_date=Tarikh - edit_enormal=Hanya fail normal sahaja yang boleh diedit edit_title=Mengedit $1 edit_title2=Membuat fail @@ -53,7 +50,6 @@ edit_notfound=Teks $1 tidak dijumpai edit_saveclose=Simpan & Tutup edit_elength=Fail dipotong! edit_textmode=Beralih ke mod teks biasa - info_file=Fail info_path=Laluan: info_type=Jenis: @@ -90,7 +86,6 @@ info_files=Jumlah fail: info_dirs=Jumlah direktori: info_getsize=Dapatkan Saiz info_esize=Gagal untuk mendapatkan saiz : $1 - eacl_eacls=Gagal membaca ACL : $1 eacl_acltype=Jenis ACL eacl_aclname=Memohon kepada @@ -109,7 +104,6 @@ eacl_edefmask=Paling banyak terdapat satu entri topeng ACL lalai eacl_title=ACL untuk $1 eacl_owner=Pemilik fail eacl_edefaults=Sekiranya fail mempunyai ACL lalai, ia mesti mempunyai pengguna lalai, kumpulan dan ACL yang lain. - acltype_user=Pengguna acltype_group=Kumpulan acltype_other=Lain-lain @@ -118,7 +112,6 @@ acltype_default_user=Pengguna Lalai acltype_default_group=Kumpulan lalai acltype_default_other=Default Lain-lain acltype_default_mask=Topeng lalai - delete_mtitle=Padam berbilang fail delete_dtitle=Padamkan direktori delete_ftitle=Padam fail @@ -126,13 +119,11 @@ delete_ddesc=Adakah anda pasti mahu memadam direktori $1 dan semua kandungannya delete_fdesc=Adakah anda pasti mahu memadamkan fail $1 secara kekal? delete_mdesc=Adakah anda pasti mahu memadamkan fail dan direktori ini secara kekal? : delete_efailed=Gagal memadam $1 : $2 - mkdir_title=Direktori Baru mkdir_dir=Direktori baru: mkdir_eexists=$1 sudah wujud mkdir_efailed=Buat direktori gagal : $1 mkdir_eaccess=Anda tidak dibenarkan membuat '$1' - link_title=Buat Pautan link_from=Pautan dari: link_to=Pautan ke: @@ -141,7 +132,6 @@ link_efrom=Sumber pautan mestilah jalan mutlak link_efailed=Pautan gagal : $1 link_efrom2=Anda tidak dibenarkan untuk memaut dari '$1' link_efollow=Anda tidak dibenarkan membuat symlinks - rename_title=Namakan semula $1 rename_old=Nama lama: rename_new=Nama baru: @@ -151,7 +141,6 @@ rename_eslash=Nama fail baru $1 mengandungi a / rename_efailed=Nama semula gagal : $1 rename_eold=Anda tidak dibenarkan untuk menamakan semula '$1' rename_enew=Anda tidak dibenarkan untuk menamakan semula kepada '$1' - file_type0=Direktori file_type1=Fail teks file_type2=Fail imej @@ -160,31 +149,26 @@ file_type4=Fail file_type5=Pautan simbolik file_type6=Fail peranti file_type7=Paip - view_enormal=Hanya fail normal yang boleh dilihat view_enormal2=Hanya fail normal yang boleh dimuat turun view_eaccess=Anda tidak dibenarkan mengakses $1 view_eopen=Gagal membuka $1 : $2 - view_edir=Arsip hanya boleh dibuat untuk direktori view_ecmd=Perintah $1 diperlukan untuk membuat arkib tidak dipasang view_ecomp=Gagal membuat arkib : $1 view_earchive=Anda tidak dibenarkan memuat turun arkib view_earchmax=Direktori yang dipilih adalah lebih besar daripada yang dibenarkan untuk mengarkibkan ($1 bait) view_epathinfo=Laluan mengandungi aksara tidak sah - paste_ecopy=Anda mesti memotong atau menyalin sebelum menampal paste_egone=Fail disalin $1 tidak lagi wujud paste_eover=$1 tidak boleh ditulis ganti paste_eself=Anda tidak boleh menyisipkan fail dengan sendirinya paste_emfailed=Pindah gagal : $1 paste_ecfailed=Salin gagal : $1 - over_title=Fail wujud over_msg=Fail $1 sudah wujud. Gunakan medan di bawah untuk memasukkan nama fail baru untuk fail disisipkan. over_new=Nama fail baru: over_ok=Okey - upload_efailed=Gagal membuka muat naik : $1 upload_title=Muat naik Fail upload_file=Fail untuk dimuat naik @@ -201,11 +185,9 @@ upload_elink=Tidak dapat memuat naik ke pautan simbolik upload_zip=Fail ZIP atau TAR yang tidak dikompresi? upload_yes=Ya, kemudian padam upload_user=Muat naik sebagai pengguna - find_eaccess=Anda tidak dibenarkan mengakses $1 find_eexist=$1 tidak wujud dalam $2 find_edir=$1 bukan direktori dalam $2 - cancel=Batalkan close=Tutup eopen=Muat turun gagal : $1 @@ -216,20 +198,15 @@ chmod_elink=symlink gagal : $1 chmod_echown=chown gagal : $1 chmod_echmod=chmod gagal : $1 chmod_efollow=Anda tidak dibenarkan mengedit pautan simbolik - copy_efrom=Anda tidak dibenarkan menyalin dari '$1' copy_eto=Anda tidak dibenarkan menyalin ke '$1' copy_elink=symlink gagal : $1 - delete_eaccess=Anda tidak dibenarkan memadamkan '$1' delete_eroot=Direktori '$1' adalah salah satu daripada yang anda terhad kepada, dan oleh itu tidak dapat dipadamkan - list_eaccess=Anda tidak dibenarkan mengakses direktori ini list_edir=Gagal menyenaraikan $1 : $2 - move_eto=Anda tidak dibenarkan pindah ke '$1' move_afrom=Anda tidak dibenarkan memindahkan '$1' - acl_user=Akses fail pada pelayan sebagai pengguna acl_user_def=Sama seperti log masuk Webmin acl_umask=Umask untuk fail baru @@ -275,7 +252,6 @@ acl_noperms=Boleh menukar kebenaran fail? acl_nousers=Boleh menukar pemilikan fail? acl_filesystems=Boleh melihat titik mount sistem fail? acl_contents=Benarkan carian kandungan fail? - share_title=Perkongsian share_samba=Windows share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Amanah tidak berakar share_s2=Percayalah semua orang share_lro=Baca sahaja share_lrw=Baca tulis - log_create_export=Mengeluarkan eksport NFS $1 log_modify_export=Mengubah eksport NFS $1 log_delete_export=Eksport NFS yang dipotong $1 @@ -322,7 +297,6 @@ log_move=Fail yang dipindahkan $1 hingga $2 log_delete=Fail dipadamkan $1 log_attr=Tetapkan atribut pada fail $1 log_acl=Tetapkan ACL pada fail $1 - search_eaccess=Anda tidak dibenarkan mencari direktori ini search_title=Cari fail search_ok=Cari Sekarang @@ -351,9 +325,7 @@ search_crit=Kriteria carian search_list=Keputusan Carian search_down=Muat turun search_edown=Tiada fail hasil carian untuk dimuat turun dipilih - facl_eaccess=Anda tidak dibenarkan menetapkan ACL untuk fail ini - attr_eattrs=Gagal mendapatkan atribut : $1 attr_efs=Fail sistem fail $1 tidak menyokong atribut attr_add=Tambah Atribut @@ -364,13 +336,11 @@ attr_title=Atribut Fail untuk $1 attr_create=Tambah Atribut attr_edit=Edit Atribut attr_ename=Nama atribut yang tiada - ext_eattrs=Gagal mendapatkan atribut EXT : $1 ext_efs=Sistem fail $1 tidak menyokong atribut EXT ext_title=Atribut EXT untuk $1 ext_header=Atribut fail EXT ext_efailed=Gagal menetapkan atribut untuk $1 : $2 - eattr_A=Jangan kemas kini masa akses eattr_a=Hanya boleh menambah fail eattr_c=Memadatkan data pada cakera @@ -379,7 +349,6 @@ eattr_i=Jangan benarkan pengubahsuaian eattr_s=Blok sifar apabila memadam eattr_S=Sentiasa selaraskan selepas menulis eattr_u=Simpan kandungan untuk undeletion - mount_eaccess=Anda tidak dibenarkan untuk melancarkan sistem fail mount_efstab=Tiada sistem fail wujud di titik gunung ini mount_epoint=$1 bukan titik gunung @@ -389,22 +358,18 @@ mount_err1=Gagal untuk dipasang $1 : $2 mount_err2=Gagal un-mount $1 : $2 mount_title1=Gunung sistem fail mount_title2=Sistem fail yang tidak dipasang - zip_err=Tidak dapat mengeluarkan fail : $1 zip_ecmd=Kehilangan arahan $1 zip_eunzip=Unzip gagal : $1 zip_ename=Tidak kelihatan sebagai fail zip, tar atau tar.gz zip_euntar=Un-tar gagal : $1 zip_euntar2=Un-compress dan un-tar gagal : $1 - ddir_title=Muat turun Direktori ddir_rusure=Untuk memuat turun kandungan $1 sebagai fail arkib, klik pada salah satu butang jenis arkib di bawah. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Ciri ini tidak tersedia - preview_etype=Tidak dapat mencipta jenis fail untuk $1 preview_etype2=$1 tidak dalam format imej yang disokong preview_ecmd=Perintah $1 diperlukan untuk skala imej ini tidak dipasang @@ -412,17 +377,14 @@ preview_eimage=Hanya imej yang boleh dipratonton preview_title=Pratonton $1 preview_bad=Tidak boleh memuatkan imej untuk pratonton preview_egd=Gagal memuat imej dengan GD - html_efailed=Gagal membuka editor HTML : $1 html_title=Edit Fail HTML html_title2=Buat Fail HTML html_save=Simpan dan tutup html_err=Gagal menyimpan fail HTML - history_title=Sejarah Jalur history_ok=Pergi ke history_button=Sejarah - extract_etype=Hanya fail yang boleh diekstrak extract_title=Ekstrak Fail Mampat extract_rusure=Adakah anda pasti mahu mengekstrak fail dimampatkan : diff --git a/file/lang/mt.auto b/file/lang/mt.auto index 029e872af..5f84225ff 100644 --- a/file/lang/mt.auto +++ b/file/lang/mt.auto @@ -3,7 +3,6 @@ index_nojava=Dan il-modulu jeħtieġ Java biex jaħdem, iżda l-browser tiegħek index_eremote=M'hemm l-ebda utent Unix li jaqbel mal-login ta 'Webmin $1. index_index=Irritorna għal Indiċi Webmin. switch_euser=Utent Unix ma jeżistix! - top_ret=Indiċi top_down=Issejvja top_preview=Preview @@ -27,13 +26,11 @@ top_mount=Immuntar top_search=Sib top_config=Kkonfigurat top_efile=L-ebda fajl magħżul - right_name=Isem right_size=Daqs right_user=Utent right_group=Grupp right_date=Data - edit_enormal=Fajls normali biss jistgħu jiġu editjati edit_title=Editjar $1 edit_title2=Ħolqien ta 'fajl @@ -53,7 +50,6 @@ edit_notfound=It-test $1 ma nstabx edit_saveclose=Issejvja & Agħlaq edit_elength=Fajl maqtugħ! edit_textmode=Aqleb għal modalità tat-test sempliċi - info_file=Fajl info_path=Triq info_type=Tip: @@ -90,7 +86,6 @@ info_files=Fajls totali: info_dirs=Direttorji totali: info_getsize=Ikseb id-Daqs info_esize=Ma rnexxielux jikseb daqsijiet : $1 - eacl_eacls=Naqset milli taqra l-ACLs : $1 eacl_acltype=Tip ACL eacl_aclname=Applika għal @@ -109,7 +104,6 @@ eacl_edefmask=Jista 'jkun hemm mhux aktar minn dħul maskra ACL waħda default eacl_title=ACL għal $1 eacl_owner=Sid tal-fajl eacl_edefaults=Jekk fajl ikollu xi ACL awtomatiku, għandu jkollu utent, grupp u ACLs oħra. - acltype_user=Utent acltype_group=Grupp acltype_other=Oħrajn @@ -118,7 +112,6 @@ acltype_default_user=Utent Default acltype_default_group=Grupp Default acltype_default_other=Default Oħrajn acltype_default_mask=Maskra Default - delete_mtitle=Ħassar fajls multipli delete_dtitle=Ħassar id-direttorju delete_ftitle=Ħassar fajl @@ -126,13 +119,11 @@ delete_ddesc=Int żgur li trid tħassar id-direttorju $1 u l-kontenut kollu tieg delete_fdesc=Int żgur li trid tħassar b'mod permanenti l-fajl $1 ? delete_mdesc=Int żgur li trid tħassar dawn il-fajls u direttorji b'mod permanenti? : delete_efailed=Ma rnexxielux jitħassar $1 : $2 - mkdir_title=Direttorju Ġdid mkdir_dir=Direttorju ġdid: mkdir_eexists=$1 diġà jeżisti mkdir_efailed=Oħloq direttorju li falla : $1 mkdir_eaccess=M'għandekx permess toħloq "$1" - link_title=Oħloq Link link_from=Link minn: link_to=Link għal: @@ -141,7 +132,6 @@ link_efrom=Is-sors tal-link għandu jkun triq assoluta link_efailed=Rabta ma rnexxietx : $1 link_efrom2=M'għandekx permess li torbot minn "$1" link_efollow=M'għandekx permess toħloq symlinks - rename_title=Semmi mill-ġdid $1 rename_old=Isem antik: rename_new=Isem ġdid: @@ -151,7 +141,6 @@ rename_eslash=L-isem tal-fajl il-ġdid $1 fih / rename_efailed=Semmi mill-ġdid fallut : $1 rename_eold=M'għandekx permess tibdel l-isem ta '"$1" rename_enew=M'għandekx permess tibdel isem ta '"$1" - file_type0=Direttorju file_type1=Fajl test file_type2=Fajl tal-immaġni @@ -160,31 +149,26 @@ file_type4=Fajl file_type5=Rabta simbolika file_type6=Fajl apparat file_type7=Pipe - view_enormal=Fajls normali biss jistgħu jarawh view_enormal2=Fajls normali biss jistgħu jitniżżlu view_eaccess=M'għandekx permess ta ' $1 view_eopen=Ma rnexxielux jiftaħ $1 : $2 - view_edir=Arkivju jista 'jinħoloq biss għal direttorju view_ecmd=Il-kmand $1 meħtieġ biex jinħoloq arkivju mhux installat view_ecomp=Ma rnexxielux joħloq arkivju : $1 view_earchive=M'għandekx permess tniżżel arkivji view_earchmax=Id-direttorju magħżul huwa akbar mill-massimu permess għall-arkivjar ($1 bytes) view_epathinfo=It-triq tinkludi karattri invalidi - paste_ecopy=Int trid tnaqqas jew tikkopja qabel ma twaħħal paste_egone=Fajl ikkupjat $1 m'għadux jeżisti paste_eover=$1 ma jistax jiġi miktub fuq ieħor paste_eself=Ma tistax tippejstja fajl innifsu paste_emfailed=Moviment li falla : $1 paste_ecfailed=Kopja fallew : $1 - over_title=Fajl Jeżisti over_msg=Il-fajl $1 diġà jeżisti. Uża l-kamp t'hawn taħt biex tidħol isem tal-fajl ġdid għall-fajl marbut. over_new=Isem tal-fajl ġdid: over_ok=Kollox sew - upload_efailed=Ma rnexxiex tiftaħ il-upload : $1 upload_title=Itella 'l-Iskeda upload_file=Fajl li ttella ' @@ -201,11 +185,9 @@ upload_elink=Ma tistax ittella 'għal rabta simbolika upload_zip=Ikkompressa l-ZIP jew il-fajl TAR? upload_yes=Iva, imbagħad ħassar upload_user=Itella bħala utent - find_eaccess=M'għandekx permess ta ' $1 find_eexist=$1 ma jeżistix f' $2 find_edir=$1 mhix direttorju f' $2 - cancel=Ikkanċella close=Qrib eopen=Id-download fallew : $1 @@ -216,20 +198,15 @@ chmod_elink=symlink falla : $1 chmod_echown=chown falla : $1 chmod_echmod=chmod falla : $1 chmod_efollow=M'għandekx permess teditja links simboliċi - copy_efrom=M'għandekx permess li tikkopja minn "$1" copy_eto=M'għandekx permess li tikkopja f '"$1" copy_elink=symlink falla : $1 - delete_eaccess=M'għandekx permess li tħassar '$1' delete_eroot=Id-direttorju '$1' huwa wieħed minn dawk li inti limitat għal, u għalhekk ma tistax titħassar - list_eaccess=M'għandekx permess taċċessa dan id-direttorju list_edir=Naqas mill-lista $1 : $2 - move_eto=M'għandekx permess tmur fuq "$1" move_afrom=M'għandekx permess tiċċaqlaq "$1" - acl_user=Aċċess l-fajls fis-server bħala utent acl_user_def=L-istess bħall-login tal-Webmin acl_umask=Umask għal fajls ġodda @@ -275,7 +252,6 @@ acl_noperms=Tista 'tibdel permessi ta' fajls? acl_nousers=Tista 'tbiddel is-sjieda tal-fajl? acl_filesystems=Tista 'tara punti ta' mmuntar tas-sistema tal-fajls? acl_contents=Ħalli tiftix tal-kontenut tal-fajl? - share_title=Qsim share_samba=Twieqi share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Fiduċja mhux mill-għeruq share_s2=Fiducja kulhadd share_lro=Aqra biss share_lrw=Aqra ikteb - log_create_export=Esportazzjoni NFS maħluqa $1 log_modify_export=Esportazzjoni NFS modifikata $1 log_delete_export=Esportazzjoni NFS imħassra $1 @@ -322,7 +297,6 @@ log_move=Iċċaqlaq il-fajl $1 għal $2 log_delete=Fajl imħassar $1 log_attr=Issettja l-attributi fuq il-fajl $1 log_acl=Issettja l-ACL fuq il-fajl $1 - search_eaccess=M'għandekx permess tfittex dan id-direttorju search_title=Sib fajls search_ok=Fittex Issa @@ -351,9 +325,7 @@ search_crit=Kriterji ta 'tiftix search_list=Riżultati tat-tfittxija search_down=Niżżel search_edown=M'hemm l-ebda fajl ta 'riżultat tat-tfittxija biex tniżżel magħżula - facl_eaccess=M'għandekx permess tistabbilixxi ACLs għal dan il-fajl - attr_eattrs=Ma rnexxielux jikseb attributi : $1 attr_efs=Is-sistema ta 'fajls $1 ma tappoġġjax attributi attr_add=Żid Attribut @@ -364,13 +336,11 @@ attr_title=Attributi tal-fajl għal $1 attr_create=Żid Attribut attr_edit=Edit Attribut attr_ename=Isem tal-attribut nieqes - ext_eattrs=Ma rnexxielux jikseb attributi EXT : $1 ext_efs=Is-sistema ta 'fajls $1 ma tappoġġjax attributi EXT ext_title=Attributi EXT għal $1 ext_header=Attributi tal-fajl EXT ext_efailed=Ma rnexxielux jistabbilixxi attributi għal $1 : $2 - eattr_A=M'għandekx taġġorna l-ħinijiet ta 'l-aċċess eattr_a=Jista 'biss tehmeż ma' fajl eattr_c=Ikkompressa d-dejta fuq id-diska @@ -379,7 +349,6 @@ eattr_i=Tħallix modifika eattr_s=Żero blokki meta tħassar eattr_S=Dejjem sinkronizza wara li tikteb eattr_u=Issejvja l-kontenut għat-tħassir - mount_eaccess=M'għandekx permess timmonta sistemi ta 'fajls mount_efstab=Ma teżisti l-ebda sistema ta 'fajls f'dan il-punt ta' impunjazzjoni mount_epoint=$1 mhuwiex punt ta 'muntaġġ @@ -389,22 +358,18 @@ mount_err1=Ma rnexxiex immuntat $1 : $2 mount_err2=Naqset milli tneħħi l-impunjazzjoni $1 : $2 mount_title1=Immuntar sistema ta 'fajls mount_title2=Sistema ta 'fajls mhux immuntata - zip_err=Ma nistax estratt fajl : $1 zip_ecmd=Nieqes kmand $1 zip_eunzip=Unzip falla : $1 zip_ename=Ma jidhirx li huwa zip, qatran jew fajl tar.gz zip_euntar=Un-tar naqas : $1 zip_euntar2=Naqas il-kompressjoni u l-qatgħa tar-rata : $1 - ddir_title=Direttorju Niżżel ddir_rusure=Biex tniżżel il-kontenut ta ' $1 bħala fajl ta' arkivju, ikklikkja fuq waħda mill-buttuni tat-tip ta 'arkivju hawn taħt. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Din il-karatteristika mhix disponibbli - preview_etype=Ma setgħetx taħdem tip ta 'fajl għal $1 preview_etype2=$1 mhux f'format ta 'immaġni appoġġat preview_ecmd=Il-kmand $1 meħtieġ biex din l-immaġni ma tkunx installata @@ -412,17 +377,14 @@ preview_eimage=Immaġini biss jistgħu jiġu previewed preview_title=Previżjoni ta ' $1 preview_bad=Ma setgħetx tagħbija l-immaġni għall-previżjoni preview_egd=Ma rnexxielhiex tgħabbi immaġni b'GD - html_efailed=Ma rnexxiex tiftaħ editur HTML : $1 html_title=Editja Fajl HTML html_title2=Oħloq Fajl HTML html_save=Issejvja u Agħlaq html_err=Ma rnexxielux isalva fajl HTML - history_title=Istorja tal-Paths history_ok=Mur Sa history_button=Storja - extract_etype=Il-fajls biss jistgħu jiġu estratti extract_title=Estratt Fajl Kompressat extract_rusure=Int żgur li trid estratt il-fajl ikkompressat : diff --git a/file/lang/nl b/file/lang/nl index c9670dd83..7d996d42c 100644 --- a/file/lang/nl +++ b/file/lang/nl @@ -3,7 +3,6 @@ index_nojava=Deze module heeft java nodig om te functioneren, maar uw browser on index_eremote=Er is geen Unix gebruiker die overeenkomt met de Webmin inlog $1. index_index=Ga terug naar Webmin index. switch_euser=Unix gebruiker bestaat niet! - top_ret=Index top_down=Opslaan top_preview=Bekijk @@ -27,13 +26,11 @@ top_mount=Mount top_search=Vind top_config=Config top_efile=Geen file geselecteerd - right_name=Naam right_size=Grote right_user=Gebruiker right_group=Groep right_date=Datum - edit_enormal=Alleen normale files kunnen bewerkt worden edit_title=Bewerken $1 edit_title2=Maak file @@ -53,7 +50,6 @@ edit_notfound=De tekst $1 is niet gevonden edit_saveclose=Opslaan & Sluiten edit_elength=File was beknot! edit_textmode=Schakel over naar platte tekst mode - info_file=File info_path=Pad : info_type=Type : @@ -88,7 +84,6 @@ info_files=Totaal files : info_dirs=Totaal directory's : info_getsize=Verkrijg Grote info_esize=Mislukt grote te verkrijgen : $1 - eacl_eacls=Mislukt om ACL's te lezen : $1 eacl_acltype=ACL Type eacl_aclname=Toevoegen aan @@ -107,7 +102,6 @@ eacl_edefmask=Er kan op zijn hoogst één standaard mask ACL ingang zijn eacl_title=ACL voor $1 eacl_owner=File eigenaar eacl_edefaults=Als een file een standaard ACL heeft, moet hij een standaard gebruiker hebben of groep en andere ACL's - acltype_user=Gebruiker acltype_group=Groep acltype_other=Andere @@ -116,7 +110,6 @@ acltype_default_user=Standaard Gebruiker acltype_default_group=Standaard Groep acltype_default_other=Standaard Andere acltype_default_mask=Standaard Mask - delete_mtitle=Verwijder meerdere files delete_dtitle=Verwijder directory delete_ftitle=Verwijder file @@ -124,13 +117,11 @@ delete_ddesc=Weet u zeker dat u de directory $1 en de gehele inhoud permanent wi delete_fdesc=Weet u zeker dat u de file $1 permanent wilt verwijderen? delete_mdesc=Weet u zeker dat u deze files and directory's permanent wilt verwijderen? delete_efailed=Verwijderen van $1 is mislukt : $2 - mkdir_title=Nieuwe Directory mkdir_dir=Nieuwe directory : mkdir_eexists=$1 bestaat reeds mkdir_efailed=Aanmaken van directory mislukte : $1 mkdir_eaccess=U bent niet bevoegd om '$1' aan te maken - link_title=Maak Link link_from=Link van : link_to=Link naar : @@ -139,7 +130,6 @@ link_efrom=Link bron moet een absoluut pad zijn link_efailed=Link mislukte : $1 link_efrom2=U bent niet bevoegd om te linken van '$1' link_efollow=U bent niet bevoegd om symlinks te maken - rename_title=Hernoemen van $1 rename_old=Oude naam : rename_new=Nieuwe naam : @@ -149,7 +139,6 @@ rename_eslash=De nieuwe file naam $1 bevat een ' / ' rename_efailed=Hernoemen mislukte : $1 rename_eold=U bent niet bevoegd om '$1' te hernoemen rename_enew=U bent niet bevoegd om te hernoemen naar '$1' - file_type0=Directory file_type1=Tekst file file_type2=Image file @@ -158,30 +147,25 @@ file_type4=File file_type5=Symbolische link file_type6=Apparaat file file_type7=Pijp - view_enormal=Alleen normale files kunnen bekeken worden view_enormal2=Alleen normale files kunnen gedownload worden view_eaccess=U bent niet bevoegd om toegang te hebben tot $1 view_eopen=Mislukt om $1 te openen : $2 - view_edir=U kunt alleen een compressie maken voor een directory view_ecmd=De opdracht $1 om een file te comprimeren is niet geinstalleerd view_ecomp=mislukt om te comprimeren : $1 view_earchive=U bent niet bevoegd om ingepakte files te downloaden view_earchmax=De geselecteerd directory is groter dan de toegestane ($1 bytes) om in te pakken. - paste_ecopy=U moet knippen of kopieeren voordat u kunt plakken paste_egone=Gekopieerde file $1 bestaat niet langer paste_eover=$1 kan niet worden overschreven paste_eself=U kunt geen file op zichzelf plakken paste_emfailed=Verplaatsen mislukte : $1 paste_ecfailed=Kopie Mislukt : $1 - over_title=File Bestaat over_msg=De file $1 bestaat reeds. Gebruik het veld hieronder om een nieuwe filenaam in te vullen voor de vorige file. over_new=Nieuwe filenaam : over_ok=Ok - upload_efailed=Mislukt om upload te openen : $1 upload_title=Upload File upload_file=File om te uploaden @@ -198,11 +182,9 @@ upload_elink=Kan niet naar een symbolische link uploaden upload_zip=ZIP of TAR file uitpakken? upload_yes=Ja, dan verwijderen upload_user=Uploaden als gebruiker - find_eaccess=U bent niet bevoegd om toegang te hebben tot $1 find_eexist=$1 bestaat niet in $2 find_edir=$1 is geen directory in $2 - cancel=Annuleer close=Sluit eopen=Download mislukte : $1 @@ -213,20 +195,15 @@ chmod_elink=symlink mislukt : $1 chmod_echown=chown mislukt : $1 chmod_echmod=chmod mislukt : $1 chmod_efollow=U bent niet bevoegd om symbolische links te bewerken - copy_efrom=U bent niet bevoegd om te kopieeren van '$1' copy_eto=U bent niet bevoegd om te kopieeren naar '$1' copy_elink=symlink mislukt : $1 - delete_eaccess=U bent niet bevoegd om '$1' te verwijderen delete_eroot=De directory '$1' is de enige waar u toegang tot heeft, en kan daarom niet verwijdert worden. - list_eaccess=U bent niet bevoegd om deze directory te bekijken list_edir=Kon geen lijst maken van $1 : $2 - move_eto=U bent niet bevoegd om te verplaatsen naar '$1' move_afrom=U bent niet bevoegd om '$1' te verplaatsen - acl_user=File toegang op server als gebruiker acl_user_def=Zelfde als Webmin inlog acl_umask=Umask voor nieuwe files @@ -272,7 +249,6 @@ acl_noperms=Mag file permissies veranderen? acl_nousers=Mag file eigenaarschap veranderen? acl_filesystems=Mag filesysteem mount points zien? acl_contents=Sta zoeken van file of inhoud toe? - share_title=Deling share_samba=Windows share_nfs=NFS @@ -301,7 +277,6 @@ share_s1=Vertrouw niet-root share_s2=Vertrouw iedereen share_lro=Alleen-lezen share_lrw=Alleen-schrijven - log_create_export=Aangemaakte NFS export $1 log_modify_export=Gemodificeerde NFS export $1 log_delete_export=Verwijderde NFS export $1 @@ -319,7 +294,6 @@ log_move=Verplaatste file $1 naar $2 log_delete=Verwijderde file $1 log_attr=Zet attributen op file $1 log_acl=Zet ACL op file $1 - search_eaccess=U bent niet bevoegd om te zoeken in deze directory search_title=Vind files search_ok=Zoek Nu @@ -348,9 +322,7 @@ search_crit=Zoek criteria search_list=Zoek resultaten search_down=Download search_edown=Geen zoekresultaten file om de geselecteerde te downloaden - facl_eaccess=U bent niet bevoegd om ACL's in te stellen voor deze file - attr_eattrs=Mislukt om attributen te verkrijgen : $1 attr_efs=Het filesysteem $1 ondersteund geen attributen attr_add=Attribuut Toevoegen @@ -361,13 +333,11 @@ attr_title=File Attributen voor $1 attr_create=Attribuut Toevoegen attr_edit=Bewerk Attributen attr_ename=Ontbrekende attributen naam - ext_eattrs=Mislukt om EXT attributen te krijgen : $1 ext_efs=Het filesysteem $1 ondersteund geen EXT attributen ext_title=EXT attributen voor $1 ext_header=EXT file attributen ext_efailed=Mislukt om attributen in te stellen voor $1 : $2 - eattr_A=Update niet de toegangs tijden eattr_a=Mag alleen toevoegen aan file eattr_c=Comprimeer data op harddisk @@ -376,7 +346,6 @@ eattr_i=Sta geen modificatie toe eattr_s=Vul de blokken met een nul wanneer iets word verwijdert eattr_S=Altijd synchroniseren na het schrijven eattr_u=Sla inhoud op voordat word verwijdert - mount_eaccess=U bent niet bevoegd om filesystemen te mounten mount_efstab=Er bestaat geen filesysteem op dit mount punt mount_epoint=$1 is geen mount punt @@ -386,22 +355,18 @@ mount_err1=Mounten van $1 mislukte : $2 mount_err2=Un-Mounten van $1 mislukte : $2 mount_title1=Mount filesysteem mount_title2=Un-mount filesysteem - zip_err=Uitpakken lukt niet van file : $1 zip_ecmd=Opdracht $1 ontbreekt zip_eunzip=Unzip mislukte : $1 zip_ename=Lijkt geen zip, tar of tar.gz file te zijn zip_euntar=Un-tar mislukt : $1 zip_euntar2=Decomprimeren en Un-tar mislukte : $1 - ddir_title=Download Directory ddir_rusure=Om de inhoud van $1 te downloaden als een ingepakte file, klik dan op één van de archief knoppen hieronder. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Deze optie is niet beschikbaar - preview_etype=Kan van $1 niet uitzoeken wat voor file type het is preview_etype2=$1 is geen ondersteund image formaat preview_ecmd=De opdracht $1 die nodig is om de image te verschalen is niet geinstalleerd @@ -409,17 +374,14 @@ preview_eimage=Alleen plaatjes kunnen vooraf bekeken worden preview_title=Bekijken van $1 preview_bad=Kon geen image laden om te bekijken preview_egd=Mislukt om de image met GD te laden - html_efailed=Mislukt om HTML bewerker te openen : $1 html_title=Bewerk HTML File html_title2=Maak HTML File html_save=Opslaan en Sluiten html_err=Mislukt om HTML file op te slaan - history_title=Pad Geschiedenis history_ok=Ga naar history_button=Geschiedenis - extract_etype=Alleen files kunnen worden uitgepakt extract_title=Uitpakken Gecomprimeerde File extract_rusure=Weet u zeker dat u de gecomprimeerde file wilt uitpakken : diff --git a/file/lang/nl.auto b/file/lang/nl.auto index 879309f9f..147a8ccb7 100644 --- a/file/lang/nl.auto +++ b/file/lang/nl.auto @@ -1,4 +1,3 @@ info_apply4=Bestanden onder deze directory en submappen info_apply5=Deze directory en alle submappen - view_epathinfo=Pad bevat ongeldige tekens diff --git a/file/lang/no b/file/lang/no index d3fb5c26b..b02f4db67 100644 --- a/file/lang/no +++ b/file/lang/no @@ -3,7 +3,6 @@ index_nojava=Denne modulen krever java for å virke, men nettleseren din ser ikk index_eremote=Det finnes ingen Unix bruker som stemmer overens med Webmin brukeren $1. index_index=Returner til Webmin indeks. switch_euser=Unix bruker finnes ikke! - top_ret=Indeks top_down=Lagre top_preview=Forhåndsvis @@ -27,13 +26,11 @@ top_mount=Monter top_search=Finn top_config=Konfig top_efile=Ingen fil valgt - right_name=Navn right_size=Størrelse right_user=Bruker right_group=Gruppe right_date=Dato - edit_enormal=Bare normale filer kan redigeres edit_title=Redigerer $1 edit_title2=Oppretter fil fil @@ -53,7 +50,6 @@ edit_notfound=The text $1 was not found edit_saveclose=Lagre og lukk edit_elength=Filen ble avkortet! edit_textmode=Bytt til vanlig tekst modus - info_file=Fil info_path=Sti: info_type=Type: @@ -90,7 +86,6 @@ info_files=Totalt filer: info_dirs=Totalt kataloger: info_getsize=Hent størrelse info_esize=Kunne ikke hente størrelser : $1 - eacl_eacls=Kunne ikke lese ACLer : $1 eacl_acltype=ACL Type eacl_aclname=Bruk på @@ -109,7 +104,6 @@ eacl_edefmask=There can be at most one default mask ACL entry eacl_title=ACL for $1 eacl_owner=Fil eier eacl_edefaults=If a file has any default ACL, it must have default user, group and other ACLs. - acltype_user=Bruker acltype_group=Gruppe acltype_other=Andre @@ -118,7 +112,6 @@ acltype_default_user=Standard bruker acltype_default_group=Standard gruppe acltype_default_other=Standard andre acltype_default_mask=Standard maske - delete_mtitle=Slett flere filer delete_dtitle=Slett katalog delete_ftitle=Slett fil @@ -126,13 +119,11 @@ delete_ddesc=Er du sikker på at du ønsker å slette katalogen $1 og alt dens i delete_fdesc=Er du sikker på at du ønsker å slette filen $1 permanent? delete_mdesc=Er du sikker på at du ønsker å slette disse filene og katalogene permanent? : delete_efailed=Kunne ikke slette $1 : $2 - mkdir_title=Ny katalog mkdir_dir=Ny katalog: mkdir_eexists=$1 finnes allerede mkdir_efailed=Create directory failed : $1 mkdir_eaccess=You are not allowed to create '$1' - link_title=Create Link link_from=Link from: link_to=Link to: @@ -141,7 +132,6 @@ link_efrom=Link source must be an absolute path link_efailed=Link failed : $1 link_efrom2=You are not allowed to link from '$1' link_efollow=You are not allowed to create symlinks - rename_title=Omdøp $1 rename_old=Gammelt navn: rename_new=Nytt navn: @@ -151,7 +141,6 @@ rename_eslash=The new file name $1 contains a / rename_efailed=Rename failed : $1 rename_eold=You are not allowed to rename '$1' rename_enew=You are not allowed to rename to '$1' - file_type0=Katalog file_type1=Tekstfil file_type2=Bildefil @@ -160,31 +149,26 @@ file_type4=Fil file_type5=Symbolsk lenke file_type6=Device file file_type7=Pipe - view_enormal=Only normal files can be viewed view_enormal2=Only normal files can be downloaded view_eaccess=Du har ikke tilgang til $1 view_eopen=Failed to open $1 : $2 - view_edir=An archive can only be created for a directory view_ecmd=The command $1 needed to create an archive is not installed view_ecomp=Failed to create archive : $1 view_earchive=Du har ikke lov til å laste ned arkiver view_earchmax=The selected directory is larger than the maximum allowed for archiving ($1 bytes) view_epathinfo=Sti inneholder ugyldige tegn - paste_ecopy=You must cut or copy before pasting paste_egone=Copied file $1 no longer exists paste_eover=$1 cannot be overwritten paste_eself=You cannot paste a file over itself paste_emfailed=Move failed : $1 paste_ecfailed=Copy failed : $1 - over_title=File Exists over_msg=The file $1 already exists. Use the field below to enter a new filename for the pasted file. over_new=New filename: over_ok=Ok - upload_efailed=Failed to open upload : $1 upload_title=Last opp fil upload_file=Fil som skal lastes opp @@ -201,11 +185,9 @@ upload_elink=Kan ikke laste opp til en symbolsk lenke upload_zip=Dekomprimer ZIP eller TAR file? upload_yes=Yes, then delete upload_user=Last opp som bruker - find_eaccess=You are not allowed to access $1 find_eexist=$1 does not exist in $2 find_edir=$1 is not a directory in $2 - cancel=Avbryt close=Lukk eopen=Nedlasting feilet : $1 @@ -216,20 +198,15 @@ chmod_elink=symlink feilet : $1 chmod_echown=chown feilet : $1 chmod_echmod=chmod feilet : $1 chmod_efollow=Du har ikke lov til å redigere symbolske lenker - copy_efrom=Du har ikke lov til å kopiere fra '$1' copy_eto=Du har ikke lov til å kopiere til '$1' copy_elink=symlink feilet : $1 - delete_eaccess=Du har ikke lov til å slette '$1' delete_eroot=Katalogen '$1' er en av de du er begrenset til, og kan derfor ikke slettes - list_eaccess=You are not allowed to access this directory list_edir=Failed to list $1 : $2 - move_eto=You are not allowed to move to '$1' move_afrom=You are not allowed to move '$1' - acl_user=Aksesser filer på tjener som bruker acl_user_def=Samme som Webmin bruker acl_umask=Umask for nye filer @@ -275,7 +252,6 @@ acl_noperms=Kan endre filtillatelser? acl_nousers=Kan endre fil eierskap? acl_filesystems=Kan se monteringspunkter for filsystem? acl_contents=Tillat søk etter fil-innhold? - share_title=Deling share_samba=Windows share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Trust non-root share_s2=Trust everybody share_lro=Read-only share_lrw=Read-write - log_create_export=Created NFS export $1 log_modify_export=Modified NFS export $1 log_delete_export=Deleted NFS export $1 @@ -322,7 +297,6 @@ log_move=Moved file $1 to $2 log_delete=Deleted file $1 log_attr=Set attributes on file $1 log_acl=Set ACL on file $1 - search_eaccess=You are not allowed to search this directory search_title=Finn filer search_ok=Søk nå @@ -351,9 +325,7 @@ search_crit=Search criteria search_list=Search results search_down=Download search_edown=No search result file to download selected - facl_eaccess=You are not allowed to set ACLs for this file - attr_eattrs=Kunne ikke hente attributter : $1 attr_efs=Filsystemet $1 støtter ikke attributter attr_add=Legg til attributt @@ -364,13 +336,11 @@ attr_title=Filattributter for $1 attr_create=Legg til attributt attr_edit=Rediger attributt attr_ename=Mangler attributtnavn - ext_eattrs=Failed to get EXT attributes : $1 ext_efs=The filesystem $1 does not support EXT attributes ext_title=EXT attributes for $1 ext_header=EXT file attributes ext_efailed=Failed to set attributes for $1 : $2 - eattr_A=Do not update access times eattr_a=Can only append to file eattr_c=Compress data on disk @@ -379,7 +349,6 @@ eattr_i=Do not allow modification eattr_s=Zero blocks when deleting eattr_S=Always sync after writing eattr_u=Save contents for undeletion - mount_eaccess=You are not allowed to mount filesystems mount_efstab=No filesystem exists at this mount point mount_epoint=$1 is not a mount point @@ -389,22 +358,18 @@ mount_err1=Failed to mount $1 : $2 mount_err2=Failed to un-mount $1 : $2 mount_title1=Mount filesystem mount_title2=Un-mount filesystem - zip_err=Kunne ikke pakke ut fil : $1 zip_ecmd=Mangler $1 kommando zip_eunzip=Unzip feilet : $1 zip_ename=Ser ikke ut til å være en zip, tar eller tar.gz fil zip_euntar=De-tar feilet : $1 zip_euntar2=Dekomprimering og de-taring feilet : $1 - ddir_title=Download Directory ddir_rusure=To download the contents of $1 as an archive file, click on one of the archive type buttons below. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=This feature is not available - preview_etype=Could not work out file type for $1 preview_etype2=$1 is not in a supported image format preview_ecmd=The command $1 needed to scale this image is not installed @@ -412,17 +377,14 @@ preview_eimage=Only images can be previewed preview_title=Preview of $1 preview_bad=Could not load image to preview preview_egd=Failed to load image with GD - html_efailed=Failed to open HTML editor : $1 html_title=Rediger HTML fil html_title2=Opprett HTML fil html_save=Lagre og lukk html_err=Failed to save HTML file - history_title=Path History history_ok=Gå til history_button=Historikk - extract_etype=Kun filer kan pakkes ut extract_title=Pakk ut komprimert fil extract_rusure=Are you sure you want to extract the compressed file : diff --git a/file/lang/pl b/file/lang/pl index 4b3ff937e..4637951e6 100644 --- a/file/lang/pl +++ b/file/lang/pl @@ -3,7 +3,6 @@ index_nojava=Ten moduł wymaga do swojego działania javy, natomiast Twoja przeg index_eremote=Żaden użytkownik Uniksa nie pasuje do loginu Webmina $1. index_index=Wróć do indeksu Webmina. switch_euser=Użytkownik Uniksa nie istnieje! - top_ret=Indeks top_down=Zapisz top_preview=Podgląd @@ -27,13 +26,11 @@ top_mount=Montuj top_search=Szukaj top_config=Ustawienia top_efile=Nie wybrano pliku - right_name=Nazwa right_size=Rozmiar right_user=Właściciel right_group=Grupa right_date=Data - edit_enormal=Modyfikować można tylko zwykle pliki edit_title=Modyfikacja $1 edit_title2=Tworzenie pliku @@ -53,7 +50,6 @@ edit_notfound=Tekst $1 nie został znaleziony edit_saveclose=Zapisz i zamknij edit_elength=Plik został obcięty! edit_textmode=Przełącz do trybu tekstowego - info_file=Plik info_path=Ścieżka: info_type=Typ: @@ -90,7 +86,6 @@ info_files=Wszystkich plików info_dirs=Wszystkich katalogów: info_getsize=Pobierz rozmiar info_esize=Błąd pobierania rozmiarów : $1 - eacl_eacls=Błąd odczytu ACL : $1 eacl_acltype=Typ ACL eacl_aclname=Zastosuj do @@ -109,7 +104,6 @@ eacl_edefmask=Może być maksymalnie jedna domyślna maska ACL eacl_title=ACL dla $1 eacl_owner=Właściciel pliku eacl_edefaults=Jeżeli plik ma domyślny ACL, to musi mieć domyślnego użytkownika, grupę i inne ACL. - acltype_user=Użytkownik acltype_group=Grupa acltype_other=Inne @@ -118,7 +112,6 @@ acltype_default_user=Domyślny użytkownik acltype_default_group=Domyślna grupa acltype_default_other=Inne domyślne acltype_default_mask=Domyślna maska - delete_mtitle=Usuwanie wielu plików delete_dtitle=Usuń katalog delete_ftitle=Usuń plik @@ -126,13 +119,11 @@ delete_ddesc=Czy na pewno chcesz nieodwracalnie usunąć katalog $1 wraz z cala delete_fdesc=Czy na pewno chcesz nieodwracalnie usunąć plik $1 ? delete_mdesc=Czy na pewno chcesz trwale usunąć te pliki i katalogi? : delete_efailed=Nie udało się usunąć $1 : $2 - mkdir_title=Nowy katalog mkdir_dir=Nowy katalog: mkdir_eexists=$1 już istnieje mkdir_efailed=Nie udało się utworzyć katalogu : $1 mkdir_eaccess=Nie masz uprawnień do utworzenia '$1' - link_title=Utwórz dowiązanie link_from=Nazwa dowiązania: link_to=Dowiązanie do: @@ -141,7 +132,6 @@ link_efrom=Nie masz uprawnień do utworzenia dowiązania '$1' link_efailed=Nie udało się utworzyć dowiązania : $1 link_efrom2=Nie masz uprawnień do łączenia z '$1' link_efollow=Nie masz uprawnień do tworzenia dowiązań symbolicznych - rename_title=Zmień nazwę $1 rename_old=Stara nazwa: rename_new=Nowa nazwa: @@ -151,7 +141,6 @@ rename_eslash=Nowa nazwa pliku $1 zawiera / rename_efailed=Nie udało się zmienić nazwy : $1 rename_eold=Nie masz uprawnień do zmiany nazwy '$1' rename_enew=Nie masz uprawnień do zmiany nazwy na '$1' - file_type0=Katalog file_type1=Plik tekstowy file_type2=Plik Image @@ -160,31 +149,26 @@ file_type4=Plik file_type5=Dowiązanie symboliczne file_type6=Plik urządzenia file_type7=plik FIFO - view_enormal=Można wyświetlać tylko zwykle pliki view_enormal2=Tylko normalne pliki mogą być pobrane view_eaccess=Nie masz prawa dostępu do $1 view_eopen=Nie udało się otworzyć $1 : $2 - view_edir=Archiwum może być utworzone tylko dla katalogu view_ecmd=Polecenie $1 jest potrzebne do utworzenia archiwum, ale nie jest zainstalowane view_ecomp=Błąd tworzenia archiwum : $1 view_earchive=Nie masz uprawnień do pobierania archiwów view_earchmax=Wybrany katalog jest większy niż maksymalny dozwolony rozmiar dla archiwów ($1 bajtów) view_epathinfo=Ścieżka zawiera nieprawidłowe znaki - paste_ecopy=Aby wkleić musisz wcześniej coś skopiować lub wyciąć paste_egone=Kopiowany plik $1 już nie istnieje paste_eover=Nie można nadpisać $1 paste_eself=Nie możesz wkleić pliku w miejsce jego samego paste_emfailed=Nie udało się przesunąć : $1 paste_ecfailed=Nie udało się skopiować : $1 - over_title=Plik istnieje over_msg=Plik $1 już istnieje. Podaj nowa nazwę dla tworzonego pliku korzystając z pola poniżej. over_new=Nowa nazwa pliku: over_ok=OK - upload_efailed=Nie udało się otworzyć wysyłania: $1 upload_title=Wyślij plik upload_file=Plik do przeslania @@ -201,11 +185,9 @@ upload_elink=Nie można wysłać do dowiązania symbolicznego upload_zip=Rozpakować plik ZIP lub TAR? upload_yes=Tak, później usuń upload_user=Wyślij jako użytkownik - find_eaccess=Nie masz prawa dostępu do $1 find_eexist=$1 nie istnieje w $2 find_edir=$1 nie jest podkatalogiem $2 - cancel=Rezygnuj close=Zamknij eopen=Pobieranie zakończone niepowodzeniem : $1 @@ -216,20 +198,15 @@ chmod_elink=nie udało się utworzyć dowiązania symbolicznego : $1 chmod_echown=nie udało się zmienić właściciela : $1 chmod_echmod=nie udało się zmienić uprawnień : $1 chmod_efollow=Nie masz uprawnień do edycji dowiązań symbolicznych - copy_efrom=Nie masz uprawnień do kopiowania '$1' copy_eto=Nie masz uprawnień do kopiowania do '$1' copy_elink=nie udało się utworzyć dowiązania symbolicznego : $1 - delete_eaccess=Nie masz uprawnień do usunięcia '$1' delete_eroot=Katalog '$1' jest jednym z katalogów z ograniczonym dostępem, więc nie możesz go usunąć - list_eaccess=Nie masz prawa dostępu do tego katalogu list_edir=Nie udało się przejrzeć $1 : $2 - move_eto=Nie masz uprawnień do przenoszenia do '$1' move_afrom=Nie masz uprawnień do przeniesienia '$1' - acl_user=Dostęp do plików na serwerze z prawami użytkownika acl_user_def=Taki sam jak zalogowany do Webmina acl_umask=Umaska dla nowych plików @@ -275,7 +252,6 @@ acl_noperms=Może zmieniać uprawnienia pliku? acl_nousers=Może zmieniać właściciela pliku? acl_filesystems=Może widzieć punkty montowania systemu plików? acl_contents=Zezwolić na szukanie w treści plików? - share_title=Udostępnianie share_samba=Windows share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Ufaj wszystkim prócz roota share_s2=Ufaj wszystkim share_lro=Tylko do odczytu share_lrw=Odczyt i zapis - log_create_export=Utworzono udostępnianie NFS $1 log_modify_export=Zmieniono udostępnianie NFS $1 log_delete_export=Usunięto udostępnianie NFS $1 @@ -322,7 +297,6 @@ log_move=Przeniesiono plik $1 do $2 log_delete=Usunięto plik $1 log_attr=Ustawiono atrybuty dla pliku $1 log_acl=Ustawiono ACL dla pliku $1 - search_eaccess=Nie masz uprawnień do przeszukiwania tego katalogu search_title=Szukaj plików search_ok=Szukaj teraz @@ -351,9 +325,7 @@ search_crit=Kryteria szukania search_list=Wyniki szukania search_down=Pobierz search_edown=Brak pliku wynik wyszukiwania, aby pobrać wybrane - facl_eaccess=Nie masz uprawnień do ustawienie ACL dla tego pliku - attr_eattrs=Błąd pobierania atrybutów : $1 attr_efs=System plików $1 nie obsługuje atrybutów attr_add=Dodaj atrybut @@ -364,13 +336,11 @@ attr_title=Atrybuty pliku dla $1 attr_create=Dodaj atrybut attr_edit=Edycja atrybutu attr_ename=Brak nazwy atrybutu - ext_eattrs=Błąd pobierania atrybutów EXT : $1 ext_efs=System plików $1 nie wspiera atrybutów EXT ext_title=Atrybuty EXT dla $1 ext_header=Atrybuty EXT pliku ext_efailed=Błąd ustawiania atrybutów dla $1 : - eattr_A=Nie aktualizuj czasu dostępu eattr_a=Może jedynie dołączyć do pliku eattr_c=Kompresuj dane na dysku @@ -379,7 +349,6 @@ eattr_i=Nie zezwalaj na modyfikacje eattr_s=Bloki zerowe przy usuwaniu eattr_S=Zawsze synchronizuj po zapisaniu eattr_u=Zapisz zawartość do odtworzenia - mount_eaccess=Nie masz uprawnień do montowania systemu plików mount_efstab=Brak systemu plików w tym punkcie montowania mount_epoint=$1 nie jest punktem montowania @@ -389,22 +358,18 @@ mount_err1=Błąd montowania $1 : $2 mount_err2=Błąd od-montowania $1 : $2 mount_title1=Montowanie systemu plików mount_title2=Od-montowanie systemu plików - zip_err=Nie można wypakować pliku : $1 zip_ecmd=Brakujące polecenie $1 zip_eunzip=Błąd wypakowania zip : $1 zip_ename=Plik nie wydaje się być plikiem zip, tar lub tar.gz zip_euntar=Błąd wypakowania tar : $1 zip_euntar2=Dekompresja i wypakowanie tar nie powiodło się : $1 - ddir_title=Pobieranie katalogu ddir_rusure=Aby pobrać zawartość $1 jako archiwum, naciśnij poniżej na jeden z typów archiwum. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Ta funkcja jest niedostępna - preview_etype=Nie udało się opracować typu pliku dla $1 preview_etype2=$1 nie jest wspieranym formatem obrazu preview_ecmd=Polecenie $1 jest potrzebne do przeskalowania tego obrazu, ale nie jest zainstalowane @@ -412,17 +377,14 @@ preview_eimage=Tylko obrazy można podglądać preview_title=Podgląd $1 preview_bad=Nie można załadować podglądu obrazu preview_egd=Błąd ładowania obrazu z GD - html_efailed=Błąd otwierania edytora HTML : $1 html_title=Edycja pliku HTML html_title2=Tworzenie pliku HTML html_save=Zapisz i zamknij html_err=Błąd zapisywania pliku HTML - history_title=Historia ścieżki history_ok=Idź do history_button=Historia - extract_etype=Tylko pliki mogą być wypakowane extract_title=Wypakowywanie skompresowanego pliku extract_rusure=Czy na pewno chcesz wypakować skompresowany plik : diff --git a/file/lang/pt b/file/lang/pt index e8a90423b..ecb910996 100644 --- a/file/lang/pt +++ b/file/lang/pt @@ -1,6 +1,5 @@ index_title=Administrador de Ficheiros index_nojava=Este módulo requer java para funcionar, mas o seu navegador não suporta java - top_edit=Editar top_refresh=Refrescar top_info=Informações @@ -11,13 +10,11 @@ top_rename=Renomear top_copy=Copiar top_cut=Cortar top_paste=Colar - right_name=Nome right_size=Tamanho right_user=Utilizador right_group=Grupo right_date=Data - edit_enormal=Apenas ficheiros normais podem ser editados edit_title=A editar $1 edit_title2=A criar ficheiro @@ -25,7 +22,6 @@ edit_filename=Nome do ficheiro: edit_eover=$1 não pode ser sobrescrito edit_esave=Erro ao guardar ficheiro : $1 edit_eaccess=Você não está autorizado para guardar '$1' - info_file=Ficheiro info_path=Caminho: info_type=Tipo: @@ -53,19 +49,16 @@ info_read=Leitura info_write=Escrita info_list=Lista info_exec=Execução - delete_dtitle=Apagar directório delete_ftitle=Apagar ficheiro delete_ddesc=Tem a certeza que quer permanentemente apagar o directório $1 e todo o seu conteúdo? delete_fdesc=Tem a certeza que quer apagar permanentemente o ficheiro $1 ? delete_efailed=Erro ao apagar $1 : $2 - mkdir_title=Novo Directório mkdir_dir=Novo directório: mkdir_eexists=$1 já existe mkdir_efailed=Erro na criação de directório : $1 mkdir_eaccess=Você não está autorizado para criar '$1' - link_title=Criar Enlace link_from=Enlace de: link_to=Enlace com: @@ -73,7 +66,6 @@ link_eexists=$1 já existe link_efrom=Você não está autorizado para criar enlaces de '$1' link_efailed=Erro no enlace : $1 link_efollow=Você não está autorizado para criar enlaces simbólicos - rename_title=Renomear $1 rename_old=Nome antigo: rename_new=Nome novo: @@ -82,7 +74,6 @@ rename_eexists=Já existe um ficheiro denominado $1 rename_efailed=Erro na renomeação : $1 rename_eold=Você não está autorizado para renomear '$1' rename_enew=Você não está autorizado para renomear para '$1' - file_type0=Directório file_type1=Ficheiro de texto file_type2=Ficheiro de imagem @@ -91,18 +82,15 @@ file_type4=Ficheiro file_type5=Enlace simbólico file_type6=Ficheiro de dispositivo file_type7=Tubo - view_enormal=Apenas ficheiros normais podem ser vistos view_eaccess=Você não está autorizado para aceder a $1 view_eopen=Erro ao abrir $1 : $2 - paste_ecopy=Tem de cortar ou copiar primeiro antes de colar paste_egone=O ficheiro cpoiado $1 já não existe paste_eover=$1 não pode ser sobrescrito paste_eself=Não pode colar um ficheiro sobre si mesmo paste_emfailed=Erro ao mover : $1 paste_ecfailed=Erro ao copiar : $1 - upload_efailed=Erro ao abrir ficheiro carregado : $1 upload_title=Carregar Ficheiro upload_file=Ficheiro paa carregar @@ -113,11 +101,9 @@ upload_efile=Não foram seleccionados ficheiros para carregar. upload_edir=Directório de carga não existe. upload_eperm=Você não está autorizado para criar $1 upload_ewrite=Erro ao escrever para $1 : $2. - find_eaccess=Você não está autorizado para aceder a $1 find_eexist=$1 não existe em $2 find_edir=$1 não é um directório de $2 - cancel=Cancelar chmod_eaccess=Você não está autorizado para aceder a '$1' chmod_euser=$1 : não existe tal utilizador @@ -125,18 +111,13 @@ chmod_egroup=$1 : não existe tal grupo chmod_elink=erro no enlace simbólico : $1 chmod_echown=erro na alteração de proprietário : $1 chmod_echmod=erro na alteração de permissões : $1 - copy_efrom=Você não está autorizado para copiar de '$1' copy_eto=Você não está autorizado para copiar para '$1' copy_elink=erro no enlace simbólico : $1 - delete_eaccess=Você não está autorizado para apagar '$1' - list_eaccess=Você não está autorizado para aceder a este directório - move_eto=Você não está autorizado para mover para '$1' move_afrom=Você não está autorizado para mover '$1' - acl_user=Aceder a ficheiros no servidor como utilizador acl_umask=Máscara de utilizador para novos ficheiros acl_follow=Seguir sempre enlaces simbólicos? diff --git a/file/lang/pt.auto b/file/lang/pt.auto index 7a6e47f2f..5a770359b 100644 --- a/file/lang/pt.auto +++ b/file/lang/pt.auto @@ -1,7 +1,6 @@ index_eremote=Não há usuário Unix que corresponda ao login Webmin $1. index_index=Retorne ao índice Webmin. switch_euser=Usuário Unix não existe! - top_ret=Índice top_down=Salve  top_preview=Pré-visualização @@ -15,7 +14,6 @@ top_mount=Mount top_search=Encontrar top_config=Config top_efile=Nenhum arquivo selecionado - edit_goto=Vamos para edit_find=Encontrar edit_gotoline=Ir para a linha @@ -28,7 +26,6 @@ edit_notfound=O texto $1 não foi encontrado edit_saveclose=Salvar fechar edit_elength=O arquivo foi truncado! edit_textmode=Mudar para o modo de texto sem formatação - info_octal=Octal: info_apply4=Arquivos neste diretório e subdiretórios info_apply5=Este diretório e todos os subdiretórios @@ -38,7 +35,6 @@ info_files=Total de arquivos: info_dirs=Total de diretórios: info_getsize=Obter tamanho info_esize=Falha ao obter tamanhos : $1 - eacl_eacls=Falha ao ler as ACLs : $1 eacl_acltype=Tipo de ACL eacl_aclname=Aplicar a @@ -57,7 +53,6 @@ eacl_edefmask=Pode haver no máximo uma entrada ACL de máscara padrão eacl_title=ACL para $1 eacl_owner=Proprietário do arquivo eacl_edefaults=Se um arquivo tiver qualquer ACL padrão, ele deverá ter usuário, grupo e outras ACLs padrão. - acltype_user=Do utilizador acltype_group=Grupo acltype_other=Outras @@ -66,14 +61,10 @@ acltype_default_user=Usuário padrão acltype_default_group=Grupo padrão acltype_default_other=Outros padrão acltype_default_mask=Máscara padrão - delete_mtitle=Excluir vários arquivos delete_mdesc=Tem certeza de que deseja excluir permanentemente esses arquivos e diretórios? : - link_efrom2=Você não tem permissão para vincular a partir de '$1' - rename_eslash=O novo nome de arquivo $1 contém um / - view_enormal2=Somente arquivos normais podem ser baixados view_edir=Um arquivo morto pode ser criado apenas para um diretório view_ecmd=O comando $1 necessário para criar um arquivo morto não está instalado @@ -81,28 +72,21 @@ view_ecomp=Falha ao criar arquivo : $1 view_earchive=Você não tem permissão para baixar arquivos view_earchmax=O diretório selecionado é maior que o máximo permitido para arquivamento ($1 bytes) view_epathinfo=Caminho contém caracteres inválidos - over_title=O arquivo existe over_msg=O arquivo $1 já existe. Use o campo abaixo para inserir um novo nome de arquivo para o arquivo colado. over_new=Novo nome de arquivo: over_ok=Está bem - upload_euser=Usuário selecionado não existe. upload_already=O arquivo $1 já existe. Tem certeza de que deseja substituí-lo? upload_elink=Não é possível fazer o upload para um link simbólico upload_zip=Descompacte o arquivo ZIP ou TAR? upload_yes=Sim, apague upload_user=Carregar como usuário - close=Fechar eopen=Falha no download : $1 - chmod_efollow=Você não tem permissão para editar links simbólicos - delete_eroot=O diretório '$1' é um dos quais você está limitado e, portanto, não pode ser excluído - list_edir=Falha ao listar $1 : $2 - acl_user_def=Igual ao login no Webmin acl_fyes=Se os proprietários corresponderem acl_ro=Modo somente leitura? @@ -144,7 +128,6 @@ acl_noperms=Pode alterar as permissões de arquivo? acl_nousers=Pode alterar a propriedade do arquivo? acl_filesystems=Pode ver os pontos de montagem do sistema de arquivos? acl_contents=Permitir pesquisa do conteúdo do arquivo? - share_title=Partilha share_samba=janelas share_nfs=NFS @@ -173,7 +156,6 @@ share_s1=Confiança não raiz share_s2=Confie em todos share_lro=Somente leitura share_lrw=Ler escrever - log_create_export=Exportação de NFS criada $1 log_modify_export=Exportação NFS modificada $1 log_delete_export=Exportação NFS excluída $1 @@ -191,7 +173,6 @@ log_move=Arquivo movido $1 para $2 log_delete=Arquivo excluído $1 log_attr=Definir atributos no arquivo $1 log_acl=Definir ACL no arquivo $1 - search_eaccess=Você não tem permissão para pesquisar neste diretório search_title=Localizar arquivos search_ok=Procure agora @@ -220,9 +201,7 @@ search_crit=Critérios de pesquisa search_list=Procurar Resultados search_down=Baixar search_edown=Nenhum arquivo de resultado de pesquisa para download selecionado - facl_eaccess=Você não tem permissão para definir ACLs para este arquivo - attr_eattrs=Falha ao obter atributos : $1 attr_efs=O sistema de arquivos $1 não suporta atributos attr_add=Adicionar atributo @@ -233,13 +212,11 @@ attr_title=Atributos de arquivo para $1 attr_create=Adicionar atributo attr_edit=Editar atributo attr_ename=Nome do atributo ausente - ext_eattrs=Falha ao obter atributos EXT : $1 ext_efs=O sistema de arquivos $1 não suporta atributos EXT ext_title=Atributos EXT para $1 ext_header=Atributos do arquivo EXT ext_efailed=Falha ao definir atributos para $1 : $2 - eattr_A=Não atualize os tempos de acesso eattr_a=Só pode acrescentar ao arquivo eattr_c=Compactar dados no disco @@ -248,7 +225,6 @@ eattr_i=Não permitir modificação eattr_s=Zero bloco ao excluir eattr_S=Sempre sincronize após escrever eattr_u=Salvar conteúdo para remoção de exclusão - mount_eaccess=Você não tem permissão para montar sistemas de arquivos mount_efstab=Nenhum sistema de arquivos existe neste ponto de montagem mount_epoint=$1 não é um ponto de montagem @@ -258,22 +234,18 @@ mount_err1=Falha ao montar $1 : $2 mount_err2=Falha ao desmontar $1 : $2 mount_title1=Montar sistema de arquivos mount_title2=Desmontar sistema de arquivos - zip_err=Não foi possível extrair o arquivo : $1 zip_ecmd=Comando $1 ausente zip_eunzip=Falha ao descompactar : $1 zip_ename=Não parece ser um arquivo zip, tar ou tar.gz zip_euntar=Falha na remoção do tar : $1 zip_euntar2=Falha ao descompactar e desarquivar : $1 - ddir_title=Diretório de downloads ddir_rusure=Para baixar o conteúdo de $1 como um arquivo morto, clique em um dos botões de tipo de arquivo abaixo. ddir_zip=fecho eclair ddir_tgz=TAR.GZ ddir_tar=ALCATRÃO - ebutton=Este recurso não está disponível - preview_etype=Não foi possível calcular o tipo de arquivo para $1 preview_etype2=$1 não está em um formato de imagem suportado preview_ecmd=O comando $1 necessário para dimensionar esta imagem não está instalado @@ -281,17 +253,14 @@ preview_eimage=Apenas imagens podem ser visualizadas preview_title=Visualização de $1 preview_bad=Não foi possível carregar a imagem para visualizar preview_egd=Falha ao carregar a imagem com o GD - html_efailed=Falha ao abrir o editor HTML : $1 html_title=Editar arquivo HTML html_title2=Criar arquivo HTML html_save=Salvar e fechar html_err=Falha ao salvar o arquivo HTML - history_title=Histórico do caminho history_ok=Vamos para history_button=História - extract_etype=Somente arquivos podem ser extraídos extract_title=Extrair arquivo compactado extract_rusure=Tem certeza de que deseja extrair o arquivo compactado : diff --git a/file/lang/pt_BR b/file/lang/pt_BR index 9fb04b856..63dff88e3 100644 --- a/file/lang/pt_BR +++ b/file/lang/pt_BR @@ -2,7 +2,6 @@ index_title=Gerenciador de Arquivos index_nojava=Este módulo requer java para funcionar, porém o seu navegador não suporta java index_eremote=Não há nenhum usuário Unix que corresponda ao login $1 do Webmin. switch_euser=O usuário Unix não existe! - top_ret=Índice top_down=Salvar top_edit=Editar @@ -20,13 +19,11 @@ top_cut=Recortar top_paste=Colar top_share=Compartilhar top_search=Procurar - right_name=Nome right_size=Tamanho right_user=Usuário right_group=Grupo right_date=Data - edit_enormal=Somente arquivos comuns podem ser editados edit_title=Editando $1 edit_title2=Criando o arquivo @@ -34,7 +31,6 @@ edit_filename=Nome do arquivo: edit_eover=$1 não pode ser sobrescrito edit_esave=Falha ao salvar o arquivo : $1 edit_eaccess=Você não está autorizado a salvar '$1' - info_file=Arquivo info_path=Caminho: info_type=Tipo: @@ -63,7 +59,6 @@ info_read=Ler info_write=Escrever info_list=Listar info_exec=Executar - eacl_eacls=Falha ao ler ACLs : $1 eacl_acltype=Tipo de ACL eacl_aclname=Aplicar a @@ -82,7 +77,6 @@ eacl_edefmask=Pode existir uma entrada a mais padrão para a máscara ACL eacl_title=ACL para $1 eacl_owner=Dono do arquivo eacl_edefaults=Se o arquivo contém qualquer ACL padrão, ele precisa ter usuário, grupo e outras ACLs padrão. - acltype_user=Usuário acltype_group=Grupo acltype_other=Outros @@ -91,7 +85,6 @@ acltype_default_user=Usuário Padrão acltype_default_group=Grupo Padrão acltype_default_other=Outros Padrão acltype_default_mask=Máscara Padrão - delete_mtitle=Apagar múltiplos arquivos delete_dtitle=Apagar diretório delete_ftitle=Apagar arquivo @@ -99,13 +92,11 @@ delete_ddesc=Você tem certeza que deseja apagar permanentemente o diretório $1 delete_fdesc=Você tem certeza que deseja apagar permanentemente o arquivo $1 ? delete_mdesc=Você tem certeza que deseja apagar permanentemente estes arquivos e diretórios? : delete_efailed=Falha ao apagar $1 : $2 - mkdir_title=Novo Diretório mkdir_dir=Novo diretório: mkdir_eexists=$1 já existe mkdir_efailed=Falha ao criar diretório : $1 mkdir_eaccess=Você não está autorizado a criar '$1' - link_title=Criar Link link_from=Link de: link_to=Link para: @@ -113,7 +104,6 @@ link_eexists=$1 já existe link_efrom=Você não está autorizado a linkar de '$1' link_efailed=Falha ao criar link : $1 link_efollow=Você não está autorizado a criar links simbólicos - rename_title=Renomear $1 rename_old=Nome antigo: rename_new=Nome novo: @@ -122,7 +112,6 @@ rename_eexists=Um arquivo chamado $1 já existe rename_efailed=Falha ao renomear : $1 rename_eold=Você não está autorizado a renomear '$1' rename_enew=Você não está autorizado a renomear para '$1' - file_type0=Directório file_type1=Arquivo texto file_type2=Arquivo de Imagem @@ -131,24 +120,20 @@ file_type4=Arquivo file_type5=Link simbólico file_type6=Arquivo de dispositivo file_type7=Pipe - view_enormal=Somente arquivos comuns podem ser vizualizados view_enormal2=Somente pode ser feito download de arquivos comuns view_eaccess=Você não está autorizado a acessar $1 view_eopen=Falha ao abrir $1 : $2 - paste_ecopy=Você precisa recortar ou copiar antes de colar paste_egone=Arquivo copiado $1 não existe mais paste_eover=$1 não pode ser sobrescrito paste_eself=Você não pode colar um arquivo sobre ele mesmo paste_emfailed=Falha ao mover : $1 paste_ecfailed=Falha ao copiar : $1 - over_title=Arquivo já existe over_msg=O arquivo $1 já existe. Use o campo abaixo para digitar o nome do arquivo a ser colado. over_new=Novo nome do arquivo: over_ok=Ok - upload_efailed=Falha ao abrir upload : $1 upload_title=Arquivo para upload upload_file=Arquivo para upload @@ -159,11 +144,9 @@ upload_efile=Não foi selecionado nenhum arquivo para upload. upload_edir=Diretório de upload não existe. upload_eperm=Você não está autorizado a criar $1 upload_ewrite=Falha a escrever para $1 : $2. - find_eaccess=Você não tem permissão para acessar $1 find_eexist=$1 não existe em $2 find_edir=$1 não é um diretório em $2 - cancel=Cancelar chmod_eaccess=Você não está autorizado a acessar '$1' chmod_euser=$1 : usuário inválido @@ -172,19 +155,14 @@ chmod_elink=falha no link simbólico : $1 chmod_echown=falha no chown : $1 chmod_echmod=falha no chmod : $1 chmod_efollow=Você não está autorizado a editar links simbólicos - copy_efrom=Você não está autorizado a copiar de '$1' copy_eto=Você não esta autorizado a copiar para '$1' copy_elink=falha no link simbólico : $1 - delete_eaccess=Você não esta autorizado a apagar '$1' - list_eaccess=Você não esta autorizado a acessar este diretorio list_edir=Falha ao listar $1 : $2 - move_eto=Você não está autorizado a mover para '$1' move_afrom=Você não está autorizado a mover '$1' - acl_user=Acessar arquivos no servidor como usuário acl_user_def=O mesmo que no login do Webmin acl_umask=Umask para novos arquivos @@ -208,7 +186,6 @@ acl_button_makelink=Novo (criar link simbólico) acl_button_rename=Renomear (renomear arquivo) acl_button_mount=Montar (montar ou demosntar dados) acl_button_copy=Copiar, Cortar e Colar - share_title=Compartilhamento share_samba=Windows share_nfs=NFS @@ -237,7 +214,6 @@ share_s1=Confiar em não root share_s2=Confiar em todos share_lro=Somente leitura share_lrw=Leitura e escrita - log_create_export=Criada exportação NFS $1 log_modify_export=Modificada exportação NFS $1 log_delete_export=Deletada exportação NFS $1 @@ -255,7 +231,6 @@ log_move=Movido o arquivo $1 para $2 log_delete=Deletado o arquivo $1 log_attr=Foram setados os atributos no arquivo $1 log_acl=Setar ACL no arquivo $1 - search_eaccess=Você não tem autorização para procurar neste diretório search_title=Procurar arquivos search_ok=Procurar agora @@ -281,9 +256,7 @@ search_egroup=Faltando nome do grupo search_esize=O tamanho do arquivo precisa ser um inteiro search_crit=Critério de pesquisa search_list=Resultados da pesquisa - facl_eaccess=Você não tem permissão para alterar ACLs para este arquivo - attr_eattrs=Falha ao receber atributos de : $1 attr_efs=O sistema de arquivos $1 não suporta atributos attr_add=Adicionar atributo @@ -294,13 +267,11 @@ attr_title=Atributos do arquivo para $1 attr_create=Adicionar atributo attr_edit=Editar atributo attr_ename=Faltando o nome do atributo - ext_eattrs=Falha ao receber atributos EXT : $1 ext_efs=O sistema de arquivos $1 não suporta atributos EXT ext_title=Atributos EXT para $1 ext_header=Atributos EXT do arquivo ext_efailed=Falha ao fixar atributos para $1 : $2 - eattr_A=Nâo atualize os tempos de acesso eattr_a=Pode somente adicionar ao fim do arquivo eattr_c=Comprimir dados no disco diff --git a/file/lang/pt_BR.auto b/file/lang/pt_BR.auto index 8b922a590..b467c8f5e 100644 --- a/file/lang/pt_BR.auto +++ b/file/lang/pt_BR.auto @@ -1,12 +1,10 @@ index_index=Retorne ao índice Webmin. - top_preview=Pré-visualização top_html=HTML top_extract=Extrair top_mount=Mount top_config=Config top_efile=Nenhum arquivo selecionado - edit_goto=Vamos para edit_find=Encontrar edit_gotoline=Ir para a linha @@ -19,7 +17,6 @@ edit_notfound=O texto $1 não foi encontrado edit_saveclose=Salvar fechar edit_elength=O arquivo foi truncado! edit_textmode=Mudar para o modo de texto sem formatação - info_apply4=Arquivos neste diretório e subdiretórios info_apply5=Este diretório e todos os subdiretórios info_sizeheader=Tamanho do diretório @@ -28,30 +25,23 @@ info_files=Total de arquivos: info_dirs=Total de diretórios: info_getsize=Obter tamanho info_esize=Falha ao obter tamanhos : $1 - link_efrom2=Você não tem permissão para vincular a partir de '$1' - rename_eslash=O novo nome de arquivo $1 contém um / - view_edir=Um arquivo morto pode ser criado apenas para um diretório view_ecmd=O comando $1 necessário para criar um arquivo morto não está instalado view_ecomp=Falha ao criar arquivo : $1 view_earchive=Você não tem permissão para baixar arquivos view_earchmax=O diretório selecionado é maior que o máximo permitido para arquivamento ($1 bytes) view_epathinfo=Caminho contém caracteres inválidos - upload_euser=Usuário selecionado não existe. upload_already=O arquivo $1 já existe. Tem certeza de que deseja substituí-lo? upload_elink=Não é possível fazer o upload para um link simbólico upload_zip=Descompacte o arquivo ZIP ou TAR? upload_yes=Sim, apague upload_user=Carregar como usuário - close=Fechar eopen=Falha no download : $1 - delete_eroot=O diretório '$1' é um dos quais você está limitado e, portanto, não pode ser excluído - acl_fyes=Se os proprietários corresponderem acl_nodirs=Negar acesso aos diretórios acl_max=Tamanho máximo de upload @@ -74,11 +64,9 @@ acl_noperms=Pode alterar as permissões de arquivo? acl_nousers=Pode alterar a propriedade do arquivo? acl_filesystems=Pode ver os pontos de montagem do sistema de arquivos? acl_contents=Permitir pesquisa do conteúdo do arquivo? - search_cont=Contendo texto search_down=Baixar search_edown=Nenhum arquivo de resultado de pesquisa para download selecionado - mount_eaccess=Você não tem permissão para montar sistemas de arquivos mount_efstab=Nenhum sistema de arquivos existe neste ponto de montagem mount_epoint=$1 não é um ponto de montagem @@ -88,22 +76,18 @@ mount_err1=Falha ao montar $1 : $2 mount_err2=Falha ao desmontar $1 : $2 mount_title1=Montar sistema de arquivos mount_title2=Desmontar sistema de arquivos - zip_err=Não foi possível extrair o arquivo : $1 zip_ecmd=Comando $1 ausente zip_eunzip=Falha ao descompactar : $1 zip_ename=Não parece ser um arquivo zip, tar ou tar.gz zip_euntar=Falha na remoção do tar : $1 zip_euntar2=Falha ao descompactar e desarquivar : $1 - ddir_title=Diretório de downloads ddir_rusure=Para baixar o conteúdo de $1 como um arquivo morto, clique em um dos botões de tipo de arquivo abaixo. ddir_zip=fecho eclair ddir_tgz=TAR.GZ ddir_tar=ALCATRÃO - ebutton=Este recurso não está disponível - preview_etype=Não foi possível calcular o tipo de arquivo para $1 preview_etype2=$1 não está em um formato de imagem suportado preview_ecmd=O comando $1 necessário para dimensionar esta imagem não está instalado @@ -111,17 +95,14 @@ preview_eimage=Apenas imagens podem ser visualizadas preview_title=Visualização de $1 preview_bad=Não foi possível carregar a imagem para visualizar preview_egd=Falha ao carregar a imagem com o GD - html_efailed=Falha ao abrir o editor HTML : $1 html_title=Editar arquivo HTML html_title2=Criar arquivo HTML html_save=Salvar e fechar html_err=Falha ao salvar o arquivo HTML - history_title=Histórico do caminho history_ok=Vamos para history_button=História - extract_etype=Somente arquivos podem ser extraídos extract_title=Extrair arquivo compactado extract_rusure=Tem certeza de que deseja extrair o arquivo compactado : diff --git a/file/lang/ro.auto b/file/lang/ro.auto index ce11c27ac..1b9737c23 100644 --- a/file/lang/ro.auto +++ b/file/lang/ro.auto @@ -3,7 +3,6 @@ index_nojava=Acest modul necesită funcționarea Java, dar browserul dvs. nu acc index_eremote=Nu există un utilizator Unix care să se potrivească cu conectarea Webmin $1. index_index=Reveniți la Index Webmin. switch_euser=Utilizatorul Unix nu există! - top_ret=Index top_down=salva top_preview=previzualizare @@ -27,13 +26,11 @@ top_mount=montură top_search=Găsi top_config=config top_efile=Niciun fisier selectat - right_name=Nume right_size=mărimea right_user=Utilizator right_group=grup right_date=Data - edit_enormal=Doar fișierele normale pot fi editate edit_title=Editarea $1 edit_title2=Crearea fișierului @@ -53,7 +50,6 @@ edit_notfound=Textul $1 nu a fost găsit edit_saveclose=Salvați și închideți edit_elength=Fișierul a fost trunchiat! edit_textmode=Comutați la modul text simplu - info_file=Fişier info_path=Cale: info_type=Tip: @@ -90,7 +86,6 @@ info_files=Total fisiere: info_dirs=Total directoare: info_getsize=Obțineți dimensiune info_esize=Nu au reușit să obțineți dimensiuni : $1 - eacl_eacls=Citirea ACL-urilor nu a reușit : $1 eacl_acltype=Tip ACL eacl_aclname=Aplica pentru @@ -109,7 +104,6 @@ eacl_edefmask=Există cel mult o intrare ACL de mască implicită eacl_title=ACL pentru $1 eacl_owner=Proprietar de fișiere eacl_edefaults=Dacă un fișier are un ACL implicit, acesta trebuie să aibă utilizator implicit, grup și alte ACL. - acltype_user=Utilizator acltype_group=grup acltype_other=Alții @@ -118,7 +112,6 @@ acltype_default_user=Utilizator implicit acltype_default_group=Grup implicit acltype_default_other=Altele implicite acltype_default_mask=Mască implicită - delete_mtitle=Ștergeți mai multe fișiere delete_dtitle=Ștergeți directorul delete_ftitle=Sterge fisierul @@ -126,13 +119,11 @@ delete_ddesc=Sigur doriți să ștergeți definitiv directorul $1 și întregul delete_fdesc=Sigur doriți să ștergeți definitiv fișierul $1 ? delete_mdesc=Sigur doriți să ștergeți definitiv aceste fișiere și directoare? : delete_efailed=Nu a reușit să ștergi $1 : $2 - mkdir_title=Director nou mkdir_dir=Nou director: mkdir_eexists=$1 există deja mkdir_efailed=Crearea directorului a eșuat : $1 mkdir_eaccess=Nu aveți voie să creați „$1” - link_title=Creați link link_from=Link de la: link_to=Link către: @@ -141,7 +132,6 @@ link_efrom=Sursa de legătură trebuie să fie o cale absolută link_efailed=Link-ul a eșuat : $1 link_efrom2=Nu aveți voie să faceți legătura din „$1” link_efollow=Nu aveți voie să creați simboluri - rename_title=Redenumiți $1 rename_old=Nume vechi: rename_new=Nume nou: @@ -151,7 +141,6 @@ rename_eslash=Noul fișier $1 conține un / rename_efailed=Redenumirea a eșuat : $1 rename_eold=Nu aveți voie să redenumiți „$1” rename_enew=Nu aveți voie să redenumiți la „$1” - file_type0=Director file_type1=Fisier text file_type2=Fișier imagine @@ -160,31 +149,26 @@ file_type4=Fişier file_type5=Legătură simbolică file_type6=Fișier dispozitiv file_type7=țeavă - view_enormal=Doar fișierele normale pot fi vizualizate view_enormal2=Doar fișierele normale pot fi descărcate view_eaccess=Nu aveți voie să accesați $1 view_eopen=Nu a putut deschide $1 : $2 - view_edir=O arhivă poate fi creată doar pentru un director view_ecmd=Comanda $1 necesară creării unei arhive nu este instalată view_ecomp=Crearea arhivei nu a reușit : $1 view_earchive=Nu aveți voie să descărcați arhive view_earchmax=Directorul selectat este mai mare decât maximul permis pentru arhivare ($1 octeți) view_epathinfo=Calea conține caractere nevalide - paste_ecopy=Trebuie să tăiați sau să copiați înainte de a lipi paste_egone=Fișierul copiat $1 nu mai există paste_eover=$1 nu poate fi suprascris paste_eself=Nu puteți lipi un fișier singur paste_emfailed=Mutarea a eșuat : $1 paste_ecfailed=Copierea a eșuat : $1 - over_title=Fisierul exista over_msg=Fișierul $1 există deja. Utilizați câmpul de mai jos pentru a introduce un nou nume de fișier pentru fișierul lipit. over_new=Nume de fișier nou: over_ok=O.K - upload_efailed=Eroare la deschiderea încărcării : $1 upload_title=Incarca fisier upload_file=Fișier de încărcat @@ -201,11 +185,9 @@ upload_elink=Nu se poate încărca într-un link simbolic upload_zip=Dezinprimați fișierul ZIP sau TAR? upload_yes=Da, apoi șterge upload_user=Încărcați ca utilizator - find_eaccess=Nu aveți voie să accesați $1 find_eexist=$1 nu există în $2 find_edir=$1 nu este un director în $2 - cancel=Anulare close=Închide eopen=Descărcare eșuată : $1 @@ -216,20 +198,15 @@ chmod_elink=link-ul eșec : $1 chmod_echown=picătura eșuată : $1 chmod_echmod=chmod a eșuat : $1 chmod_efollow=Nu aveți voie să editați link-uri simbolice - copy_efrom=Nu aveți voie să copiați din „$1” copy_eto=Nu aveți voie să copiați pe „$1” copy_elink=link-ul eșec : $1 - delete_eaccess=Nu aveți voie să ștergeți „$1” delete_eroot=Directorul „$1” este unul dintre cele la care sunteți limitat și deci nu poate fi șters - list_eaccess=Nu aveți voie să accesați acest director list_edir=Nu a reușit să listeze $1 : $2 - move_eto=Nu aveți voie să treceți la „$1” move_afrom=Nu aveți voie să mutați „$1” - acl_user=Accesați fișierele pe server ca utilizator acl_user_def=La fel ca autentificarea Webmin acl_umask=Umask pentru fișiere noi @@ -275,7 +252,6 @@ acl_noperms=Poate schimba permisiunile de fișiere? acl_nousers=Poate schimba proprietatea fișierului? acl_filesystems=Pot vedea puncte de montare a sistemului de fișiere? acl_contents=Permiteți căutarea conținutului fișierului? - share_title=Partajarea share_samba=ferestre share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Încredere non-root share_s2=Ai încredere în toată lumea share_lro=Numai în citire share_lrw=Citeste, scrie - log_create_export=Export creat NFS $1 log_modify_export=Export modificat NFS $1 log_delete_export=Export șters NFS $1 @@ -322,7 +297,6 @@ log_move=Fișier mutat $1 la $2 log_delete=Fișierul șters $1 log_attr=Setați atribute pe fișierul $1 log_acl=Setați ACL pe fișierul $1 - search_eaccess=Nu aveți voie să căutați în acest director search_title=Găsiți fișiere search_ok=Cauta acum @@ -351,9 +325,7 @@ search_crit=Criteriu de cautare search_list=Rezultatele cautarii search_down=Descarca search_edown=Nu a fost selectat niciun fișier cu rezultatul căutării - facl_eaccess=Nu aveți voie să setați ACL-uri pentru acest fișier - attr_eattrs=Eroare la obținerea atributelor : $1 attr_efs=Sistemul de fișiere $1 nu acceptă atribute attr_add=Adăugați atribut @@ -364,13 +336,11 @@ attr_title=Fișiere Atribute pentru $1 attr_create=Adăugați atribut attr_edit=Editează atributul attr_ename=Numele atributului lipsește - ext_eattrs=Eroare la obținerea atributelor EXT : $1 ext_efs=Sistemul de fișiere $1 nu acceptă atributele EXT ext_title=Atribute EXT pentru $1 ext_header=Atributele fișierului EXT ext_efailed=Setarea atributelor pentru $1 : $2 nu a reușit - eattr_A=Nu actualizați orele de acces eattr_a=Se poate anexa la fișier eattr_c=Compresează datele de pe disc @@ -379,7 +349,6 @@ eattr_i=Nu permiteți modificarea eattr_s=Blocați zero la ștergere eattr_S=Sincronizați întotdeauna după scriere eattr_u=Salvați conținutul pentru ștergere - mount_eaccess=Nu aveți voie să montați sisteme de fișiere mount_efstab=Nu există un sistem de fișiere în acest punct de montare mount_epoint=$1 nu este un punct de montaj @@ -389,22 +358,18 @@ mount_err1=Montajul $1 : $2 nu a reușit mount_err2=Nu a reușit să demonteze $1 : $2 mount_title1=Montare sistem de fișiere mount_title2=Un-mount sistem de fișiere - zip_err=Nu s-a putut extrage fișierul : $1 zip_ecmd=Lipsește comanda $1 zip_eunzip=Decuplarea a eșuat : $1 zip_ename=Nu pare să fie un fișier zip, tar sau tar.gz zip_euntar=Un-tar nu a reușit : $1 zip_euntar2=Decomprimarea și dezarhivarea au eșuat : $1 - ddir_title=Descărcați directorul ddir_rusure=Pentru a descărca conținutul $1 ca fișier de arhivă, faceți clic pe unul dintre butoanele de tip arhivă de mai jos. ddir_zip=ZIP ddir_tgz=tar.gz ddir_tar=GUDRON - ebutton=Această caracteristică nu este disponibilă - preview_etype=Nu s-a putut rezolva tipul de fișier pentru $1 preview_etype2=$1 nu se află într-un format de imagine acceptat preview_ecmd=Comanda $1 necesară pentru scalarea acestei imagini nu este instalată @@ -412,17 +377,14 @@ preview_eimage=Se pot previzualiza doar imaginile preview_title=Previzualizarea $1 preview_bad=Imposibil de încărcat imaginea pentru previzualizare preview_egd=Nu a putut încărca imaginea cu GD - html_efailed=Eroare la deschiderea editorului HTML : $1 html_title=Editați fișierul HTML html_title2=Creați fișier HTML html_save=Salveaza si inchide html_err=Nu a reușit salvarea fișierului HTML - history_title=Istoria căilor history_ok=Mergi la history_button=Istorie - extract_etype=Se pot extrage doar fișiere extract_title=Extrageți fișierul comprimat extract_rusure=Sigur doriți să extrageți fișierul comprimat : diff --git a/file/lang/ru b/file/lang/ru index 64eda0c99..bc017c631 100644 --- a/file/lang/ru +++ b/file/lang/ru @@ -2,7 +2,6 @@ index_title=Менеджер файлов index_nojava=Для функционирования этого модуля требуется java, однако ваш браузер java не поддерживает index_eremote=Нет пользователя Unix соответствующего пользователю Webmin $1. switch_euser=Пользователь Unix не существует! - top_ret=Меню top_down=Сохранить top_edit=Изменить @@ -20,13 +19,11 @@ top_cut=Вырезать top_paste=Вставить top_share=Сеть top_search=Найти - right_name=Имя right_size=Размер right_user=Пользователь right_group=Группа right_date=Дата - edit_enormal=Можно редактировать только обычные файлы edit_title=Редактирование $1 edit_title2=Создание файла @@ -34,7 +31,6 @@ edit_filename=Имя файла: edit_eover=$1 не может быть перезаписан edit_esave=Не удалось сохранить файл : $1 edit_eaccess=У вас недостаточно прав для сохранения '$1' - info_file=Файл info_path=Путь: info_type=Тип: @@ -63,7 +59,6 @@ info_read=Чтение info_write=Запись info_list=Просмотр info_exec=Выполнение - eacl_eacls=Не удалось считать ACL : $1 eacl_acltype=Тип ACL eacl_aclname=Применить к @@ -82,7 +77,6 @@ eacl_edefmask=There can be at most one default mask ACL entry eacl_title=ACL для $1 eacl_owner=Владелец файла eacl_edefaults=If a file has any default ACL, it must have default user, group and other ACLs. - acltype_user=Пользователь acltype_group=Группа acltype_other=Прочие @@ -91,7 +85,6 @@ acltype_default_user=Пользователь по умолчанию acltype_default_group=Группа по умолчанию acltype_default_other=Прочие по умолчанию acltype_default_mask=Маска по умолчанию - delete_mtitle=Удаление нескольких файлов delete_dtitle=Удаление каталога delete_ftitle=Удаление файла @@ -99,13 +92,11 @@ delete_ddesc=Навсегда удалить каталог $1 со всем е delete_fdesc=Навсегда удалить файл $1 ? delete_mdesc=Навсегда удалить указанные файлы и каталоги? : delete_efailed=Не удалось удалить $1 : $2 - mkdir_title=Новый каталог mkdir_dir=Новый каталог: mkdir_eexists=$1 уже существует mkdir_efailed=Не удалось создать каталог : $1 mkdir_eaccess=У вас недостаточно прав для создания '$1' - link_title=Создание ссылки link_from=Источник: link_to=Место назначения: @@ -113,7 +104,6 @@ link_eexists=$1 уже существует link_efrom=У вас недостаточно прав для создания ссылки '$1' link_efailed=Создать ссылку не удалось : $1 link_efollow=У вас недостаточно прав для создания ссылок - rename_title=Переименование $1 rename_old=Старое имя: rename_new=Новое имя: @@ -122,7 +112,6 @@ rename_eexists=Файл с именем $1 уже существует rename_efailed=Переименовать не удалось : $1 rename_eold=У вас недостаточно прав для переименования '$1' rename_enew=У вас недостаточно прав для переименования в '$1' - file_type0=Каталог file_type1=Текстовый файл file_type2=Файл изображения @@ -131,24 +120,20 @@ file_type4=Файл file_type5=Символьная ссылка file_type6=Файл устройства file_type7=Канал - view_enormal=Можно просматривать только обычные файлы view_enormal2=Можно загружать только обычные файлы view_eaccess=У вас недостаточно прав для доступа к $1 view_eopen=Не удалось открыть $1 : $2 - paste_ecopy=Перед вставкой необходимо вырезать или копировать paste_egone=Копируемый файл $1 больше не существует paste_eover=$1 не может быть перезаписан paste_eself=Нельзя переписать файл самим собой paste_emfailed=Не удалось переместить : $1 paste_ecfailed=Не удалось скопировать : $1 - over_title=Файл существует over_msg=Файл $1 уже существует. Укажите для вставляемого файла новое имя. over_new=Новое имя файла: over_ok=ОК - upload_efailed=Не удалось начать загрузку : $1 upload_title=Загрузка файла upload_file=Файл для загрузки @@ -159,11 +144,9 @@ upload_efile=Не выбран файл для загрузки. upload_edir=Каталог для загрузки не существует. upload_eperm=У вас недостаточно прав для создания $1 upload_ewrite=Не удалось записать в $1 : $2. - find_eaccess=У вас недостаточно прав для доступа к $1 find_eexist=$1 не существует в $2 find_edir=$1 не является каталогом в $2 - cancel=Отмена chmod_eaccess=У вас недостаточно прав для доступа к '$1' chmod_euser=$1 : нет такого пользователя @@ -172,19 +155,14 @@ chmod_elink=Ошибка при вызове symlink : $1 chmod_echown=Ошибка при вызове chown : $1 chmod_echmod=Ошибка при вызове chmod : $1 chmod_efollow=У вас недостаточно прав для изменения символьных ссылок - copy_efrom=У вас недостаточно прав для копирования из '$1' copy_eto=У вас недостаточно прав для копирования в '$1' copy_elink=Ошибка при вызове symlink : $1 - delete_eaccess=У вас недостаточно прав для удаления '$1' - list_eaccess=У вас недостаточно прав для доступа к этому каталогу list_edir=Не удалось просмотреть $1 : $2 - move_eto=У вас недостаточно прав для перемещения в '$1' move_afrom=У вас недостаточно прав для перемещения '$1' - acl_user=Обращаться к файлам на сервере под именем пользователя acl_user_def=Пользователя Webmin acl_umask=Umask для новых файлов @@ -194,7 +172,6 @@ acl_dirs=Позволять доступ только к каталогам acl_home=Включая домашний каталог пользователя Webmin acl_log=Вести журнал всех изменений файлов? acl_goto=Открывать первый доступный каталог? - share_title=Доступ по сети share_samba=Windows share_nfs=NFS @@ -223,7 +200,6 @@ share_s1=Доверять не-root share_s2=Доверять всем share_lro=Только чтение share_lrw=Чтение/запись - log_create_export=Создан ресурс NFS $1 log_modify_export=Изменен ресурс NFS $1 log_delete_export=Удален ресурс NFS $1 @@ -241,7 +217,6 @@ log_move=Перемещен файл $1 в $2 log_delete=Удален файл $1 log_attr=Изменены атрибуты файла $1 log_acl=Для файла $1 назначен ACL - search_eaccess=У вас недостаточно прав для поиска в этом каталоге search_title=Поиск файлов search_ok=Искать @@ -267,9 +242,7 @@ search_egroup=Имя группы не указано или указано не search_esize=Размер файла должен быть целым числом search_crit=Критерий поиска search_list=Результаты поиска - facl_eaccess=У вас недостаточно прав для изменения ACL для этого файла - attr_eattrs=Не удалось считать атрибуты : $1 attr_efs=Файловая система $1 не поддерживает атрибуты attr_add=Добавить атрибут @@ -280,13 +253,11 @@ attr_title=Атрибуты файла для $1 attr_create=Добавить атрибут attr_edit=Изменить атрибут attr_ename=Не указано название атрибута - ext_eattrs=Не удалось получить атрибуты EXT : $1 ext_efs=Файловая система $1 не поддерживает атрибуты EXT ext_title=Атрибуты EXT для $1 ext_header=Атрибуты EXT файла ext_efailed=Не удалось установить атрибуты EXT $1 : $2 - eattr_A=Не обновлять время доступа eattr_a=Возможно только добавление к файлу eattr_c=Сжимать данные на диске diff --git a/file/lang/ru.auto b/file/lang/ru.auto index cffaf6c6b..c0a9c2b85 100644 --- a/file/lang/ru.auto +++ b/file/lang/ru.auto @@ -1,12 +1,10 @@ index_index=Вернитесь в индекс Webmin. - top_preview=предварительный просмотр top_html=HTML top_extract=экстракт top_mount=гора top_config=конфиг top_efile=Файл не выбран - edit_goto=Перейти к edit_find=найти edit_gotoline=Перейти на линию @@ -19,7 +17,6 @@ edit_notfound=Текст $1 не найден edit_saveclose=Сохранить и закрыть edit_elength=Файл был усечен! edit_textmode=Переключиться в режим обычного текста - info_apply4=Файлы в этом каталоге и подкаталогах info_apply5=Этот каталог и все подкаталоги info_sizeheader=Размер каталога @@ -28,30 +25,23 @@ info_files=Всего файлов: info_dirs=Всего каталогов: info_getsize=Получить размер info_esize=Не удалось получить размеры : $1 - link_efrom2=Вам не разрешено указывать ссылку от $1 - rename_eslash=Новое имя файла $1 содержит / - view_edir=Архив может быть создан только для каталога view_ecmd=Команда $1, необходимая для создания архива, не установлена view_ecomp=Не удалось создать архив : $1 view_earchive=Вам не разрешено скачивать архивы view_earchmax=Выбранный каталог больше максимально допустимого для архивирования ($1 байт) view_epathinfo=Путь содержит недопустимые символы - upload_euser=Выбранный пользователь не существует. upload_already=Файл $1 уже существует. Вы уверены, что хотите перезаписать это? upload_elink=Не удается загрузить по символической ссылке upload_zip=Разархивировать файл ZIP или TAR? upload_yes=Да тогда удаляй upload_user=Загрузить как пользователь - close=близко eopen=Ошибка загрузки : $1 - delete_eroot=Каталог «$1» является одним из тех, которыми вы ограничены, и поэтому не может быть удален - acl_fyes=Если владельцы совпадают acl_nodirs=Запретить доступ к каталогам acl_max=Максимальный размер загрузки @@ -88,11 +78,9 @@ acl_noperms=Можно изменить права доступа к файла acl_nousers=Можно ли изменить владельца файла? acl_filesystems=Можно увидеть точки монтирования файловой системы? acl_contents=Разрешить поиск содержимого файла? - search_cont=Содержащий текст search_down=Скачать search_edown=Не найден файл результатов поиска для загрузки - mount_eaccess=Вам не разрешено монтировать файловые системы mount_efstab=В этой точке монтирования нет файловой системы mount_epoint=$1 не является точкой монтирования @@ -102,22 +90,18 @@ mount_err1=Не удалось смонтировать $1 : $2 mount_err2=Не удалось отключить $1 : $2 mount_title1=Смонтировать файловую систему mount_title2=Отключить файловую систему - zip_err=Не удалось извлечь файл : $1 zip_ecmd=Отсутствует команда $1 zip_eunzip=Не удалось распаковать архив : $1 zip_ename=Не является файлом zip, tar или tar.gz zip_euntar=Не удалось распаковать : $1 zip_euntar2=Распаковка и удаление смол : $1 - ddir_title=Скачать каталог ddir_rusure=Чтобы загрузить содержимое $1 в виде файла архива, нажмите одну из кнопок типа архива ниже. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Эта функция недоступна - preview_etype=Не удалось определить тип файла для $1 preview_etype2=$1 не в поддерживаемом формате изображения preview_ecmd=Команда $1, необходимая для масштабирования этого образа, не установлена @@ -125,17 +109,14 @@ preview_eimage=Только изображения могут быть прос preview_title=Предварительный просмотр $1 preview_bad=Не удалось загрузить изображение для предварительного просмотра preview_egd=Не удалось загрузить изображение с GD - html_efailed=Не удалось открыть редактор HTML : $1 html_title=Редактировать файл HTML html_title2=Создать HTML-файл html_save=Сохранить и закрыть html_err=Не удалось сохранить файл HTML - history_title=Путь История history_ok=Перейти к history_button=история - extract_etype=Только файлы могут быть извлечены extract_title=Извлечь сжатый файл extract_rusure=Вы уверены, что хотите извлечь сжатый файл : diff --git a/file/lang/sk b/file/lang/sk index 947f2b829..fb565a7f4 100644 --- a/file/lang/sk +++ b/file/lang/sk @@ -1,7 +1,6 @@ index_title=Správca Systému Súborov index_eremote=Žiadny Unixový užívateľ nezodpovedá hodnotám z Webmin prihlásečnia $1. switch_euser=Tento Unixový užívateľ nejestvuje! - top_ret=Index top_down=Ulož top_edit=Otvor pre zmeny @@ -19,13 +18,11 @@ top_cut=Vyber top_paste=Vlož top_share=Zdieľanie top_search=Nájdi - right_name=Meno right_size=Veľkosť right_user=Užívateľ right_group=Skupina right_date=Dátum - edit_enormal=Len normálne súbory môžu byť menené edit_title=Zmeny na $1 edit_title2=Vytvánie súboru @@ -33,7 +30,6 @@ edit_filename=Meno súboru: edit_eover=$1 nemôže byť prepísané edit_esave=NEmoohol uložiť : $1 edit_eaccess=Nemáš povolenie na ukladanie '$1' - info_file=Súbor info_path=Cesta: info_type=Typ: @@ -61,7 +57,6 @@ info_read=Čítaj info_write=Píš info_list=Zoznam info_exec=Exec - eacl_eacls=Načítavanie ACL súborov nebolo úspešné : $1 eacl_acltype=Typ ACL eacl_aclname=Použi na @@ -80,7 +75,6 @@ eacl_edefmask=Maximálne môže byť použitá jedna základná maskovaná ACL eacl_title=ACL pre $1 eacl_owner=Majiteľ súboru eacl_edefaults=Ak súbor má základnú ACL, musí tiež mať základného majiteľa, skupinu a ostatné ACL. - acltype_user=Užívateľ acltype_group=Skupina acltype_other=Iné @@ -89,7 +83,6 @@ acltype_default_user=Základný užívateľ acltype_default_group=Základná skupina acltype_default_other=Základné Iné acltype_default_mask=Základná Maska - delete_mtitle=Vymaž viacero súborov delete_dtitle=Vymaž adresár delete_ftitle=Vymaž súbor @@ -97,13 +90,11 @@ delete_ddesc=Si si istý že chceš permanente vymazať adresár $1 a všetok je delete_fdesc=Si si istý že chceš permanente vymazať súbor $1 ? delete_mdesc=Si si istý že chceš permanente vymazať adresáre a súbory? : delete_efailed=Nemožné vymazať $1 : $2 - mkdir_title=Novo-vytvorený Adresár mkdir_dir=Nový Adresár: mkdir_eexists=$1 už jestvuje mkdir_efailed=Vytvorenie Adresáru nebolo úspešné : $1 mkdir_eaccess=Nemáš povolenie na vytvorenie '$1' - link_title=Vytvor Spojenie link_from=Spojenie z: link_to=Spojenie na: @@ -111,7 +102,6 @@ link_eexists=$1 už jestvuje link_efrom=Nemáš dovolené vytvárať spojenia na '$1' link_efailed=Spojenie nebolo úspešné : $1 link_efollow=Nemáš dostatočné povolenie na vytváranie symbolických spojení - rename_title=Premenuj $1 rename_old=Pôvodné meno: rename_new=Nové meno: @@ -120,7 +110,6 @@ rename_eexists=Súbor s menom $1 už jestvuje rename_efailed=Premenovávanie nebolo úspešné : $1 rename_eold=Nemáš dovolené premenovávať '$1' rename_enew=Nemáš dovolené premenovávať na '$1' - file_type0=Adresár file_type1=Textový súbor file_type2=Obrázok @@ -129,24 +118,20 @@ file_type4=Súbor file_type5=Symbolické spojenie file_type6=Súbor ovládača file_type7=Rúrka - view_enormal=Len normálne súbory môžu byť prezerané view_enormal2=Len normálne súbory môžu byť sťahované view_eaccess=Nemáš povolený prístup k $1 view_eopen=Otvorenie nebolo úspešné $1 : $2 - paste_ecopy=Musíš najprv vybrať alebo skopírovať ak chceš vkladať paste_egone=Súbor kopírovaný $1 už neexiststuje paste_eover=$1 nemôže byť prepísaný paste_eself=Nemôžeš vkladať súbor do adresára so súborom s rovnakým menom paste_emfailed=Premiestnenie nebolo úspešné : $1 paste_ecfailed=Vytváranie kópie nebolo úspešné : $1 - over_title=Súbor už Existstuje over_msg=Súbor $1 už existstuje. Použi políčko nižšie na premenovanie vkladaného súboru. over_new=Nové meno súboru: over_ok=Ok - upload_efailed=Naložený súbor : $1 sa nepodarilo otvoriť upload_title=Nalož súbor upload_file=Súbor pre nakladanie @@ -157,11 +142,9 @@ upload_efile=Nebol vybratý žiaden súbor na nakladanie. upload_edir=Adresár na nakladanie neexistuje. upload_eperm=You are not allowed to create $1 upload_ewrite=Failed to write to $1 : $2. - find_eaccess=You are not allowed to access $1 find_eexist=$1 does not exist in $2 find_edir=$1 is not a directory in $2 - cancel=Zruš chmod_eaccess=You are not allowed to access '$1' chmod_euser=$1 : no such user @@ -170,19 +153,14 @@ chmod_elink=symlink failed : $1 chmod_echown=chown failed : $1 chmod_echmod=chmod failed : $1 chmod_efollow=You are not allowed to edit symbolic links - copy_efrom=You are not allowed to copy from '$1' copy_eto=You are not allowed to copy to '$1' copy_elink=symlink failed : $1 - delete_eaccess=You are not allowed to delete '$1' - list_eaccess=You are not allowed to access this directory list_edir=Failed to list $1 : $2 - move_eto=You are not allowed to move to '$1' move_afrom=You are not allowed to move '$1' - acl_user=Access files on server as user acl_user_def=Same as Webmin login acl_umask=Umask for new files @@ -192,7 +170,6 @@ acl_dirs=Only allow access to directories acl_home=Include home directory of Webmin user acl_log=Log all file modifications? acl_goto=Open first allowed directory? - share_title=Sharing share_samba=Windows share_nfs=NFS @@ -221,7 +198,6 @@ share_s1=Trust non-root share_s2=Trust everybody share_lro=Read-only share_lrw=Read-write - log_create_export=Created NFS export $1 log_modify_export=Modified NFS export $1 log_delete_export=Deleted NFS export $1 @@ -239,7 +215,6 @@ log_move=Moved file $1 to $2 log_delete=Deleted file $1 log_attr=Set attributes on file $1 log_acl=Set ACL on file $1 - search_eaccess=You are not allowed to search this directory search_title=Find files search_ok=Search Now @@ -265,9 +240,7 @@ search_egroup=Missing group name search_esize=File size must be an integer search_crit=Search criteria search_list=Search results - facl_eaccess=You are not allowed to set ACLs for this file - attr_eattrs=Failed to get attributes : $1 attr_efs=The filesystem $1 does not support attributes attr_add=Add Attribute @@ -278,13 +251,11 @@ attr_title=File Attributes for $1 attr_create=Add Attribute attr_edit=Edit Attribute attr_ename=Missing attribute name - ext_eattrs=Failed to get EXT attributes : $1 ext_efs=The filesystem $1 does not support EXT attributes ext_title=EXT attributes for $1 ext_header=EXT file attributes ext_efailed=Failed to set attributes for $1 : $2 - eattr_A=Do not update access times eattr_a=Can only append to file eattr_c=Compress data on disk diff --git a/file/lang/sk.auto b/file/lang/sk.auto index 939b74e51..43814944e 100644 --- a/file/lang/sk.auto +++ b/file/lang/sk.auto @@ -1,13 +1,11 @@ index_nojava=Tento modul vyžaduje na fungovanie Java, ale váš prehliadač nepodporuje Java index_index=Vráťte sa na Index správcov webu. - top_preview=Náhľad top_html=HTML top_extract=výťažok top_mount=kôň top_config=config top_efile=Nie je vybraný žiadny súbor - edit_goto=Ísť do edit_find=Nájsť edit_gotoline=Choďte na riadok @@ -20,7 +18,6 @@ edit_notfound=Text $1 nebol nájdený edit_saveclose=Uložiť a zavrieť edit_elength=Súbor bol skrátený! edit_textmode=Prepnite do režimu obyčajného textu - info_octal=osmičkové: info_apply4=Súbory v tomto adresári a podadresároch info_apply5=Tento adresár a všetky podadresáre @@ -30,30 +27,23 @@ info_files=Celkový počet súborov: info_dirs=Celkový počet adresárov: info_getsize=Získajte veľkosť info_esize=Nepodarilo sa získať veľkosti : $1 - link_efrom2=Nemáte povolenie odkazovať z „$1“ - rename_eslash=Nový názov súboru $1 obsahuje / - view_edir=Archív je možné vytvoriť iba pre adresár view_ecmd=Nie je nainštalovaný príkaz $1 potrebný na vytvorenie archívu view_ecomp=Nepodarilo sa vytvoriť archív : $1 view_earchive=Nemáte povolenie sťahovať archívy view_earchmax=Vybratý adresár je väčší ako maximum povolené na archiváciu ($1 bajtov) view_epathinfo=Cesta obsahuje neplatné znaky - upload_euser=Vybraný používateľ neexistuje. upload_already=Súbor $1 už existuje. Naozaj to chcete prepísať? upload_elink=Nemožno nahrať na symbolický odkaz upload_zip=Dekomprimovať súbor ZIP alebo TAR? upload_yes=Áno, potom odstráňte upload_user=Odovzdať ako používateľ - close=Zavrieť eopen=Sťahovanie zlyhalo : $1 - delete_eroot=Adresár „$1“ je jedným z tých, na ktoré ste obmedzení, a preto ich nemožno odstrániť - acl_fyes=Ak sa majitelia zhodujú acl_nodirs=Odmietnuť prístup k adresárom acl_max=Maximálna veľkosť nahrávania @@ -90,11 +80,9 @@ acl_noperms=Môžu sa meniť povolenia súborov? acl_nousers=Môžete zmeniť vlastníctvo súboru? acl_filesystems=Vidíte body pripojenia súborového systému? acl_contents=Povoliť vyhľadávanie obsahu súboru? - search_cont=Obsahujúci text search_down=Stiahnuť ▼ search_edown=Nie je vybratý žiadny súbor s výsledkami vyhľadávania na stiahnutie - mount_eaccess=Nemáte oprávnenie pripájať súborové systémy mount_efstab=V tomto bode pripojenia neexistuje žiadny súborový systém mount_epoint=$1 nie je bod pripojenia @@ -104,22 +92,18 @@ mount_err1=Nepodarilo sa pripojiť $1 : $2 mount_err2=Nepodarilo sa odpojiť $1 : $2 mount_title1=Pripojte súborový systém mount_title2=Odinštalovať súborový systém - zip_err=Súbor sa nepodarilo extrahovať : $1 zip_ecmd=Chýba príkaz $1 zip_eunzip=Rozbalenie zlyhalo : $1 zip_ename=Nezdá sa, že ide o súbor zip, tar alebo tar.gz zip_euntar=Zrušenie tarovania zlyhalo : $1 zip_euntar2=Zrušenie kompresie a zrušenie tarovania zlyhalo : $1 - ddir_title=Adresár na stiahnutie ddir_rusure=Ak chcete stiahnuť obsah $1 ako archívny súbor, kliknite na jedno z tlačidiel typu archívu nižšie. ddir_zip=PSČ ddir_tgz=tar.gz ddir_tar=TAR - ebutton=Táto funkcia nie je k dispozícii - preview_etype=Nepodarilo sa zistiť typ súboru pre $1 preview_etype2=$1 nie je v podporovanom formáte obrázka preview_ecmd=Príkaz $1 potrebný na zmenu mierky tohto obrázka nie je nainštalovaný @@ -127,17 +111,14 @@ preview_eimage=Môžete zobraziť iba obrázky preview_title=Ukážka $1 preview_bad=Obrázok sa nepodarilo načítať na zobrazenie ukážky preview_egd=Načítanie obrázka pomocou GD zlyhalo - html_efailed=Nepodarilo sa otvoriť editor HTML : $1 html_title=Upravte súbor HTML html_title2=Vytvorenie súboru HTML html_save=Uložiť a zavrieť html_err=Súbor HTML sa nepodarilo uložiť - history_title=História ciest history_ok=Ísť do history_button=histórie - extract_etype=Extrahovať možno iba súbory extract_title=Extrahovať komprimovaný súbor extract_rusure=Naozaj chcete extrahovať komprimovaný súbor : diff --git a/file/lang/sl.auto b/file/lang/sl.auto index 6fb40e60c..493e2de8a 100644 --- a/file/lang/sl.auto +++ b/file/lang/sl.auto @@ -3,7 +3,6 @@ index_nojava=Za ta modul potrebuje Java, vendar vaš brskalnik ne podpira Java index_eremote=Ni uporabnika Unixa, ki bi se ujemal s prijavo v Webmin $1. index_index=Vrnite se na indeks Webmin. switch_euser=Uporabnik Unix ne obstaja! - top_ret=Kazalo top_down=Shrani top_preview=Predogled @@ -27,13 +26,11 @@ top_mount=Mount top_search=Najti top_config=Konfigurirajte top_efile=Izbrana ni nobena datoteka - right_name=Ime right_size=Velikost right_user=Uporabnik right_group=Skupina right_date=Datum - edit_enormal=Urejajo lahko le običajne datoteke edit_title=Urejanje $1 edit_title2=Ustvarjanje datoteke @@ -53,7 +50,6 @@ edit_notfound=Besedila $1 ni bilo mogoče najti edit_saveclose=Shrani in zapri edit_elength=Datoteka je bila okrnjena! edit_textmode=Preklopite na navaden besedilni način - info_file=mapa info_path=Pot: info_type=Vrsta: @@ -90,7 +86,6 @@ info_files=Skupaj datotek: info_dirs=Skupaj imenikov: info_getsize=Pridobite velikost info_esize=Velikosti ni bilo mogoče dobiti : $1 - eacl_eacls=Ni bilo mogoče prebrati ACL-jev : $1 eacl_acltype=Vrsta ACL eacl_aclname=Se nanaša na @@ -109,7 +104,6 @@ eacl_edefmask=Obstaja lahko največ en privzeti vnos ACL maske eacl_title=ACL za $1 eacl_owner=Lastnik datoteke eacl_edefaults=Če ima datoteka privzeti ACL, mora imeti privzetega uporabnika, skupino in druge ACL-je. - acltype_user=Uporabnik acltype_group=Skupina acltype_other=Drugi @@ -118,7 +112,6 @@ acltype_default_user=Privzeti uporabnik acltype_default_group=Privzeta skupina acltype_default_other=Privzeto drugi acltype_default_mask=Privzeta maska - delete_mtitle=Izbrišite več datotek delete_dtitle=Izbriši imenik delete_ftitle=Izbriši datoteko @@ -126,13 +119,11 @@ delete_ddesc=Ali ste prepričani, da želite trajno izbrisati imenik $1 in vso n delete_fdesc=Ali ste prepričani, da želite trajno izbrisati datoteko $1 ? delete_mdesc=Ali ste prepričani, da želite trajno izbrisati te datoteke in imenike? : delete_efailed= $1 : $2 ni bilo mogoče izbrisati - mkdir_title=Nov imenik mkdir_dir=Nov imenik: mkdir_eexists=$1 že obstaja mkdir_efailed=Ustvarjanje imenika ni uspelo : $1 mkdir_eaccess=Ni vam dovoljeno ustvariti "$1" - link_title=Ustvari povezavo link_from=Povezava od: link_to=Povezava do: @@ -141,7 +132,6 @@ link_efrom=Vir povezave mora biti absolutna pot link_efailed=Povezava ni uspela : $1 link_efrom2=Nimate dovoljenja za povezavo z '$1' link_efollow=Ni vam dovoljeno ustvarjati povezav - rename_title=Preimenujte $1 rename_old=Staro ime: rename_new=Novo ime: @@ -151,7 +141,6 @@ rename_eslash=Novo ime datoteke $1 vsebuje / rename_efailed=Preimenovanje ni uspelo : $1 rename_eold=Ni vam dovoljeno preimenovati $1 rename_enew=Ni vam dovoljeno preimenovati v '$1' - file_type0=Imenik file_type1=Besedilna datoteka file_type2=Slikovna datoteka @@ -160,31 +149,26 @@ file_type4=mapa file_type5=Simbolična povezava file_type6=Datoteka z napravo file_type7=Cev - view_enormal=Ogledajo si lahko samo običajne datoteke view_enormal2=Prenesete lahko samo običajne datoteke view_eaccess=Dostop do $1 ni dovoljen view_eopen= $1 : $2 ni bilo mogoče odpreti - view_edir=Arhiv lahko ustvarite samo za imenik view_ecmd=Ukaz $1, potreben za ustvarjanje arhiva, ni nameščen view_ecomp=Arhiva ni bilo mogoče ustvariti : $1 view_earchive=Ni vam dovoljeno prenašati arhivov view_earchmax=Izbrani imenik je večji od največjega dovoljenega za arhiviranje ($1 bajtov) view_epathinfo=Pot vsebuje neveljavne znake - paste_ecopy=Pred lepljenjem morate izrezati ali kopirati paste_egone=Kopirane datoteke $1 ne obstaja več paste_eover=$1 ni mogoče prepisati paste_eself=Datoteke ne morete prilepiti čez sebe paste_emfailed=Premik ni uspel : $1 paste_ecfailed=Kopiranje ni uspelo : $1 - over_title=Datoteka obstaja over_msg=Datoteka $1 že obstaja. S spodnjim poljem vnesite novo ime datoteke za prilepljeno datoteko. over_new=Novo ime datoteke: over_ok=V redu - upload_efailed=Nalaganja ni bilo mogoče odpreti : $1 upload_title=Naloži datoteko upload_file=Datoteka za nalaganje @@ -201,11 +185,9 @@ upload_elink=Ni mogoče naložiti na simbolično povezavo upload_zip=Odstranite ZIP ali TAR datoteko? upload_yes=Da, nato izbrišite upload_user=Naloži kot uporabnik - find_eaccess=Dostop do $1 ni dovoljen find_eexist=$1 ne obstaja v $2 find_edir=$1 ni imenik v $2 - cancel=Prekliči close=Zapri eopen=Prenos ni uspel : $1 @@ -216,20 +198,15 @@ chmod_elink=simbolna povezava ni uspela : $1 chmod_echown=klon ni uspel : $1 chmod_echmod=chmod ni uspel : $1 chmod_efollow=Ni vam dovoljeno urejati simboličnih povezav - copy_efrom=Ni vam dovoljeno kopirati z '$1' copy_eto=Ni dovoljeno kopirati na '$1' copy_elink=simbolna povezava ni uspela : $1 - delete_eaccess=Ne smete izbrisati '$1' delete_eroot=Imenik '$1' je eden tistih, na katere ste omejeni, zato ga ni mogoče izbrisati - list_eaccess=Do tega imenika nimate dostopa list_edir=Seznama $1 : $2 ni bilo mogoče - move_eto=Ne morete se premakniti na "$1" move_afrom=Ne smete se premikati "$1" - acl_user=Dostop do datotek na strežniku kot uporabnik acl_user_def=Enako kot prijava v Webmin acl_umask=Umask za nove datoteke @@ -275,7 +252,6 @@ acl_noperms=Ali lahko spremenite dovoljenja datotek? acl_nousers=Ali lahko spremenite lastništvo datoteke? acl_filesystems=Ali lahko vidite točke pritrditve datotečnega sistema? acl_contents=Ali želite iskati vsebino datotek? - share_title=Skupna raba share_samba=Windows share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Zaupajte nekorenskim share_s2=Zaupajte vsem share_lro=Le za branje share_lrw=Brati, pisati - log_create_export=Ustvarjen izvoz NFS $1 log_modify_export=Spremenjen izvoz NFS $1 log_delete_export=Izbrisan NFS izvoz $1 @@ -322,7 +297,6 @@ log_move=Datoteka premaknjena $1 do $2 log_delete=Izbrisana datoteka $1 log_attr=Nastavite atribute v datoteki $1 log_acl=Nastavite ACL v datoteko $1 - search_eaccess=Ne morete iskati po tem imeniku search_title=Poiščite datoteke search_ok=Iščite zdaj @@ -351,9 +325,7 @@ search_crit=Merila iskanja search_list=Rezultati iskanja search_down=Prenesi search_edown=Za prenos ni izbrana nobena datoteka z rezultati iskanja - facl_eaccess=Za to datoteko ni dovoljeno nastaviti ACL-jev - attr_eattrs=Ni bilo mogoče dobiti atributov : $1 attr_efs=Datotečni sistem $1 ne podpira atributov attr_add=Dodaj atribut @@ -364,13 +336,11 @@ attr_title=Atributi datotek za $1 attr_create=Dodaj atribut attr_edit=Uredi atribut attr_ename=Manjka ime atributa - ext_eattrs=Ni bilo mogoče dobiti atributov EXT : $1 ext_efs=Datotečni sistem $1 ne podpira atributov EXT ext_title=Atributi EXT za $1 ext_header=Atributi datoteke EXT ext_efailed=Ni bilo mogoče nastaviti atributov za $1 : $2 - eattr_A=Ne posodabljajte dostopnih časov eattr_a=Datoteki se lahko doda le eattr_c=Stisnite podatke na disk @@ -379,7 +349,6 @@ eattr_i=Ne dovolite sprememb eattr_s=Ničelni bloki pri brisanju eattr_S=Po pisanju vedno sinhronizirajte eattr_u=Shranite vsebino za izbris - mount_eaccess=Nimate dovoljenja za namestitev datotečnih sistemov mount_efstab=Na tej točki montaže ne obstaja noben datotečni sistem mount_epoint=$1 ni točka pritrditve @@ -389,22 +358,18 @@ mount_err1=Namestitve $1 : $2 ni bilo mogoče mount_err2=Odstranjevanje $1 : $2 ni bilo mogoče mount_title1=Namestite datotečni sistem mount_title2=Odstranite datotečni sistem - zip_err=Datoteke ni mogoče izvleči : $1 zip_ecmd=Manjka ukaz $1 zip_eunzip=Razkritje ni uspelo : $1 zip_ename=Zdi se, da ni datoteka zip, tar ali tar.gz zip_euntar=Odstranjevanje tar-a ni uspelo : $1 zip_euntar2=Odstranjevanje in stiskanje ni uspelo : $1 - ddir_title=Prenos imenika ddir_rusure=Če želite vsebino $1 prenesti kot arhivsko datoteko, kliknite enega od gumbov vrste arhiva spodaj. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Ta funkcija ni na voljo - preview_etype=Vrsta datoteke ni mogoča za $1 preview_etype2=$1 ni v podprti obliki slike preview_ecmd=Ukaz $1, potreben za obseg te slike, ni nameščen @@ -412,17 +377,14 @@ preview_eimage=Predogled si lahko ogledajo samo slike preview_title=Predogled $1 preview_bad=Za predogled slike ni mogoče naložiti preview_egd=Ni bilo mogoče naložiti slike z GD - html_efailed=HTML urejevalnika ni bilo mogoče odpreti : $1 html_title=Uredi datoteko HTML html_title2=Ustvari datoteko HTML html_save=Shrani in zapri html_err=HTML datoteke ni bilo mogoče shraniti - history_title=Zgodovina poti history_ok=Pojdi do history_button=Zgodovina - extract_etype=Izvlečejo se lahko samo datoteke extract_title=Izvleči stisnjeno datoteko extract_rusure=Ali ste prepričani, da želite izvleči stisnjeno datoteko : diff --git a/file/lang/sv b/file/lang/sv index 4741039f6..a752dfe87 100644 --- a/file/lang/sv +++ b/file/lang/sv @@ -1,6 +1,5 @@ index_title=Filhanterare index_nojava=Denna modul behöver java för att fungera, men din läsare stödjer inte java - top_edit=Ändra top_refresh=Uppdatera top_info=Info @@ -11,13 +10,11 @@ top_rename=Byt namn top_copy=Kopiera top_cut=Klipp ut top_paste=Klistra in - right_name=Namn right_size=Storlek right_user=Användare right_group=Grupp right_date=Datum - edit_enormal=Du kan bara ändra standardfiler edit_title=Ändrar i $1 edit_title2=Skapar fil @@ -25,7 +22,6 @@ edit_filename=Filnamn: edit_eover=$1 får inte skrivas över edit_esave=Det gick inte att spara filen: $1 edit_eaccess=Du får inte spara filen '$1' - info_file=Fil info_path=Sökväg: info_type=Typ: @@ -53,19 +49,16 @@ info_read=Läs info_write=Skriv info_list=Lista info_exec=Exec - delete_dtitle=Ta bort katalog delete_ftitle=Ta bort fil delete_ddesc=Vill du verkligen ta bort katalogen $1 med innehåll permanent? delete_fdesc=Vill du verkligen ta bort filen $1 permanent? delete_efailed=Det gick inte att ta bort $1 : $2 - mkdir_title=Ny katalog mkdir_dir=Ny katalog: mkdir_eexists=$1 finns redan mkdir_efailed=Det gick inte att skapa katalogen: $1 mkdir_eaccess=Du får inte skapa '$1' - link_title=Skapa länk link_from=Länk från: link_to=Länk till: @@ -73,7 +66,6 @@ link_eexists=$1 finns redan link_efrom=Du får inte länka från '$1' link_efailed=Det gick inte att länka: $1 link_efollow=Du får inte skapa symboliska länkar - rename_title=Byt namn på $1 rename_old=Gammalt namn: rename_new=Nytt namn: @@ -82,7 +74,6 @@ rename_eexists=Det finns redan en fil som heter $1 rename_efailed=Det gick inte att byta namn: $1 rename_eold=Du får inte byta namn på '$1' rename_enew=Du får inte byta namn till '$1' - file_type0=Katalog file_type1=Textfil file_type2=Bildfile @@ -91,23 +82,19 @@ file_type4=Fil file_type5=Symbolisk länk file_type6=Device-fil file_type7=Pipe - view_enormal=Endast normala filer kan visas view_eaccess=Du får inte komma åt $1 view_eopen=Det gick inte att öppna $1: $2 - paste_ecopy=Något måste klippas ut eller kopieras för att du ska kunna klistra in paste_egone=Den kopierade filen $1 finns inte längre paste_eover=$1 får inte skrivas över paste_eself=En fil får inte klistras in över sig själv paste_emfailed=Det gick inte att flytta: $1 paste_ecfailed=Det gick inte att kopiera: $1 - over_title=Filen finns over_msg=Filen $1 finns redan. Skriv in ett nytt filnamn för den inklistrade filen i fältet nedan. over_new=Nytt filnamn: over_ok=OK - upload_efailed=Det gick inte att sätta igång nedladdningen: $1 upload_title=Ladda ned fil upload_file=Fil att ladda ned @@ -118,11 +105,9 @@ upload_efile=Du har inte valt någon fil som ska laddas ned. upload_edir=Du har inte valt någon katalog att ladda ned till. upload_eperm=Du får inte skapa $1 upload_ewrite=Det gick inte att skriva till $1: $2. - find_eaccess=Du får inte komma åt $1 find_eexist=$1 finns inte i $2 find_edir=$1 är inte en katalog i $2 - cancel=Avbryt chmod_eaccess=Du får inte komma åt '$1' chmod_euser=$1 :användaren finns inte @@ -130,19 +115,14 @@ chmod_egroup=$1 :gruppen finns inte chmod_elink=symlink misslyckades: $1 chmod_echown=chown misslyckades: $1 chmod_echmod=chmod misslyckades: $1 - copy_efrom=Du får inte kopiera från '$1' copy_eto=Du får inte kopiera till '$1' copy_elink=symlink misslyckades: $1 - delete_eaccess=Du får inte ta bort '$1' - list_eaccess=Du får inte komma åt denna katalog list_edir=Det gick inte att lista $1: $2 - move_eto=Du får inte flytta filer till '$1' move_afrom=Du får inte flytta på '$1' - acl_user=Kom åt filer på servern som användare acl_umask=Umask för nya filer acl_follow=Ska symboliska länkar alltid följas? diff --git a/file/lang/sv.auto b/file/lang/sv.auto index d9ef599e9..e2247351d 100644 --- a/file/lang/sv.auto +++ b/file/lang/sv.auto @@ -1,7 +1,6 @@ index_eremote=Det finns ingen Unix-användare som matchar Webmin-inloggningen $1. index_index=Återgå till Webmin-index. switch_euser=Unix-användare finns inte! - top_ret=Index top_down=Spara top_preview=Förhandsvisning @@ -15,7 +14,6 @@ top_mount=Montera top_search=Hitta top_config=config top_efile=Ingen fil vald - edit_goto=Gå till edit_find=Hitta edit_gotoline=Gå till raden @@ -28,7 +26,6 @@ edit_notfound=Texten $1 hittades inte edit_saveclose=Spara & stäng edit_elength=Filen trunkerades! edit_textmode=Byt till vanlig textläge - info_octal=Octal: info_apply4=Filer under denna katalog och underkataloger info_apply5=Den här katalogen och alla underkataloger @@ -38,7 +35,6 @@ info_files=Totalt antal filer: info_dirs=Totalt kataloger: info_getsize=Få storlek info_esize=Det gick inte att få storlekar : $1 - eacl_eacls=Det gick inte att läsa ACL : $1 eacl_acltype=ACL-typ eacl_aclname=Ansöka till @@ -57,7 +53,6 @@ eacl_edefmask=Det kan finnas högst en standardmask-ACL-post eacl_title=ACL för $1 eacl_owner=Filägare eacl_edefaults=Om en fil har någon standard ACL måste den ha standardanvändare, grupp och andra ACL: er. - acltype_user=Användare acltype_group=Grupp acltype_other=Övriga @@ -66,14 +61,10 @@ acltype_default_user=Standardanvändare acltype_default_group=Standardgrupp acltype_default_other=Standard andra acltype_default_mask=Standardmask - delete_mtitle=Radera flera filer delete_mdesc=Är du säker på att du vill ta bort dessa filer och kataloger permanent? : - link_efrom2=Du får inte länka från '$1' - rename_eslash=Det nya filnamnet $1 innehåller a / - view_enormal2=Endast normala filer kan laddas ner view_edir=Ett arkiv kan bara skapas för en katalog view_ecmd=Kommandot $1 som behövs för att skapa ett arkiv är inte installerat @@ -81,21 +72,16 @@ view_ecomp=Det gick inte att skapa arkiv : $1 view_earchive=Du får inte ladda ner arkiv view_earchmax=Den valda katalogen är större än det maximalt tillåtna för arkivering ($1 byte) view_epathinfo=Sökvägen innehåller ogiltiga tecken - upload_euser=Den valda användaren finns inte. upload_already=Filen $1 finns redan. Är du säker på att du vill skriva över det? upload_elink=Det går inte att ladda upp till en symbolisk länk upload_zip=Komprimera ZIP- eller TAR-fil? upload_yes=Ja, radera sedan upload_user=Ladda upp som användare - close=Stänga eopen=Nedladdningen misslyckades : $1 - chmod_efollow=Du får inte redigera symboliska länkar - delete_eroot=Katalogen '$1' är en av dem som du är begränsad till och kan därför inte tas bort - acl_user_def=Samma som Webmin-inloggning acl_fyes=Om ägarna matchar acl_ro=Skrivskyddsläge? @@ -137,7 +123,6 @@ acl_noperms=Kan ändra filbehörigheter? acl_nousers=Kan ändra filägande? acl_filesystems=Kan du se filsystemets monteringspunkter? acl_contents=Tillåter sökning av filinnehåll? - share_title=Delning share_samba=Windows share_nfs=NFS @@ -166,7 +151,6 @@ share_s1=Lita på icke-rot share_s2=Lita på alla share_lro=Skrivskyddad share_lrw=Läsa skriva - log_create_export=Skapade NFS-export $1 log_modify_export=Modifierad NFS-export $1 log_delete_export=NFS-export $1 har tagits bort @@ -184,7 +168,6 @@ log_move=Flyttade filen $1 till $2 log_delete=Raderad fil $1 log_attr=Ställ attribut på filen $1 log_acl=Ställ in ACL på fil $1 - search_eaccess=Du får inte söka i den här katalogen search_title=Hitta filer search_ok=Sök nu @@ -213,9 +196,7 @@ search_crit=Sökkriterier search_list=Sökresultat search_down=Ladda ner search_edown=Ingen sökresultatfil att ladda ner valt - facl_eaccess=Du får inte ställa in ACL: er för denna fil - attr_eattrs=Det gick inte att få attribut : $1 attr_efs=Filsystemet $1 stöder inte attribut attr_add=Lägg till attribut @@ -226,13 +207,11 @@ attr_title=Filattribut för $1 attr_create=Lägg till attribut attr_edit=Redigera attribut attr_ename=Saknas attributnamn - ext_eattrs=Det gick inte att få EXT-attribut : $1 ext_efs=Filsystemet $1 stöder inte EXT-attribut ext_title=EXT-attribut för $1 ext_header=EXT-filattribut ext_efailed=Det gick inte att ställa in attribut för $1 : $2 - eattr_A=Uppdatera inte åtkomsttiderna eattr_a=Kan bara lägga till fil eattr_c=Komprimera data på disken @@ -241,7 +220,6 @@ eattr_i=Tillåt inte ändring eattr_s=Noll blockerar när du tar bort eattr_S=Synkronisera alltid efter att du har skrivit eattr_u=Spara innehåll för borttagning - mount_eaccess=Du får inte montera filsystem mount_efstab=Det finns inget filsystem på denna monteringspunkt mount_epoint=$1 är inte en monteringspunkt @@ -251,22 +229,18 @@ mount_err1=Det gick inte att montera $1 : $2 mount_err2=Det gick inte att avmontera $1 : $2 mount_title1=Montera filsystem mount_title2=Ta bort filsystemet - zip_err=Det gick inte att extrahera filen : $1 zip_ecmd=Saknas $1 -kommando zip_eunzip=Uppackningen misslyckades : $1 zip_ename=Verkar inte vara en zip-, tar- eller tar.gz-fil zip_euntar=Un-tar misslyckades : $1 zip_euntar2=Avkomprimera och un-tar misslyckades : $1 - ddir_title=Ladda ner katalog ddir_rusure=För att ladda ner innehållet i $1 som en arkivfil, klicka på en av knapparna för arkivtyp nedan. ddir_zip=blixtlås ddir_tgz=tar.gz ddir_tar=TJÄRA - ebutton=Den här funktionen är inte tillgänglig - preview_etype=Det gick inte att räkna ut filtyp för $1 preview_etype2=$1 är inte i ett bildformat som stöds preview_ecmd=Kommandot $1 som behövs för att skala den här bilden är inte installerat @@ -274,17 +248,14 @@ preview_eimage=Endast bilder kan förhandsgranskas preview_title=Förhandsvisning av $1 preview_bad=Det gick inte att ladda bilden för att förhandsgranska preview_egd=Det gick inte att ladda bilden med GD - html_efailed=Det gick inte att öppna HTML-redigeraren : $1 html_title=Redigera HTML-fil html_title2=Skapa HTML-fil html_save=Spara och stäng html_err=Det gick inte att spara HTML-fil - history_title=Sökvägshistoria history_ok=Gå till history_button=Historia - extract_etype=Endast filer kan extraheras extract_title=Extrahera komprimerad fil extract_rusure=Är du säker på att du vill extrahera den komprimerade filen : diff --git a/file/lang/th.auto b/file/lang/th.auto index 314e19172..1a77d16ac 100644 --- a/file/lang/th.auto +++ b/file/lang/th.auto @@ -3,7 +3,6 @@ index_nojava=โมดูลนี้ต้องการ Java เพื่อ index_eremote=ไม่มีผู้ใช้ Unix ที่ตรงกับการเข้าสู่ระบบ Webmin $1 index_index=กลับไปที่ ดัชนี Webmin switch_euser=ไม่มีผู้ใช้ Unix! - top_ret=ดัชนี top_down=บันทึก top_preview=ดูตัวอย่าง @@ -27,13 +26,11 @@ top_mount=ภูเขา top_search=หา top_config=การกำหนดค่า top_efile=ไม่ได้เลือกไฟล์ - right_name=ชื่อ right_size=ขนาด right_user=ผู้ใช้งาน right_group=กลุ่ม right_date=วันที่ - edit_enormal=สามารถแก้ไขได้เฉพาะไฟล์ปกติ edit_title=กำลังแก้ไข $1 edit_title2=กำลังสร้างไฟล์ @@ -53,7 +50,6 @@ edit_notfound=ไม่พบข้อความ $1 edit_saveclose=บันทึก & ปิด edit_elength=ไฟล์ถูกตัดทอน! edit_textmode=เปลี่ยนเป็นโหมดข้อความล้วน - info_file=ไฟล์ info_path=เส้นทาง: info_type=ประเภท: @@ -90,7 +86,6 @@ info_files=ไฟล์ทั้งหมด: info_dirs=ไดเรกทอรีทั้งหมด: info_getsize=รับขนาด info_esize=ไม่สามารถรับขนาด : $1 - eacl_eacls=ไม่สามารถอ่าน ACLs : $1 eacl_acltype=ประเภท ACL eacl_aclname=ใช้กับ @@ -109,7 +104,6 @@ eacl_edefmask=สามารถมีได้มากที่สุดหน eacl_title=ACL สำหรับ $1 eacl_owner=เจ้าของไฟล์ eacl_edefaults=หากไฟล์มี ACL เริ่มต้นจะต้องมีผู้ใช้เริ่มต้นกลุ่มและ ACL อื่น ๆ - acltype_user=ผู้ใช้งาน acltype_group=กลุ่ม acltype_other=คนอื่น ๆ @@ -118,7 +112,6 @@ acltype_default_user=ผู้ใช้เริ่มต้น acltype_default_group=กลุ่มเริ่มต้น acltype_default_other=ผิดนัดอื่น ๆ acltype_default_mask=หน้ากากเริ่มต้น - delete_mtitle=ลบหลายไฟล์ delete_dtitle=ลบไดเรกทอรี delete_ftitle=ลบไฟล์ @@ -126,13 +119,11 @@ delete_ddesc=คุณแน่ใจหรือไม่ว่าต้อง delete_fdesc=คุณแน่ใจหรือว่าต้องการลบไฟล์ $1 อย่างถาวร? delete_mdesc=คุณแน่ใจหรือว่าต้องการลบไฟล์และไดเรกทอรีเหล่านี้อย่างถาวร : delete_efailed=ไม่สามารถลบ $1 : $2 - mkdir_title=ใหม่ไดเรกทอรี mkdir_dir=ไดเรกทอรีใหม่: mkdir_eexists=มี $1 อยู่แล้ว mkdir_efailed=สร้างไดเรกทอรีล้มเหลว : $1 mkdir_eaccess=คุณไม่ได้รับอนุญาตให้สร้าง '$1' - link_title=สร้างลิงค์ link_from=ลิงค์จาก: link_to=ลิงก์ไปที่: @@ -141,7 +132,6 @@ link_efrom=แหล่งที่มาของลิงก์จะต้อ link_efailed=ลิงก์ล้มเหลว : $1 link_efrom2=คุณไม่ได้รับอนุญาตให้ลิงก์จาก '$1' link_efollow=คุณไม่ได้รับอนุญาตให้สร้าง symlink - rename_title=เปลี่ยนชื่อ $1 rename_old=ชื่อเก่า: rename_new=ชื่อใหม่: @@ -151,7 +141,6 @@ rename_eslash=ชื่อไฟล์ใหม่ $1 มี / rename_efailed=การเปลี่ยนชื่อล้มเหลว : $1 rename_eold=คุณไม่ได้รับอนุญาตให้เปลี่ยนชื่อ '$1' rename_enew=คุณไม่ได้รับอนุญาตให้เปลี่ยนชื่อเป็น '$1' - file_type0=ไดเรกทอรี file_type1=ไฟล์ข้อความ file_type2=ไฟล์ภาพ @@ -160,31 +149,26 @@ file_type4=ไฟล์ file_type5=ลิงก์สัญลักษณ์ file_type6=ไฟล์อุปกรณ์ file_type7=ท่อ - view_enormal=สามารถดูได้เฉพาะไฟล์ปกติ view_enormal2=สามารถดาวน์โหลดได้เฉพาะไฟล์ปกติ view_eaccess=คุณไม่ได้รับอนุญาตให้เข้าถึง $1 view_eopen=ไม่สามารถเปิด $1 : $2 - view_edir=สามารถสร้างการเก็บถาวรสำหรับไดเรกทอรีเท่านั้น view_ecmd=ไม่ได้ติดตั้งคำสั่ง $1 เพื่อสร้างการเก็บถาวร view_ecomp=ไม่สามารถสร้างไฟล์เก็บถาวร : $1 view_earchive=คุณไม่ได้รับอนุญาตให้ดาวน์โหลดไฟล์เก็บถาวร view_earchmax=ไดเรกทอรีที่เลือกใหญ่กว่าจำนวนสูงสุดที่อนุญาตสำหรับการเก็บถาวร ($1 ไบต์) view_epathinfo=เส้นทางมีอักขระที่ไม่ถูกต้อง - paste_ecopy=คุณต้องตัดหรือคัดลอกก่อนวาง paste_egone=ไฟล์ที่คัดลอก $1 ไม่มีอยู่อีกต่อไป paste_eover=ไม่สามารถเขียนทับ $1 ได้ paste_eself=คุณไม่สามารถวางไฟล์ทับได้ paste_emfailed=การย้ายล้มเหลว : $1 paste_ecfailed=การคัดลอกล้มเหลว : $1 - over_title=แฟ้มที่มีอยู่ over_msg=ไฟล์ $1 มีอยู่แล้ว ใช้ฟิลด์ด้านล่างเพื่อป้อนชื่อไฟล์ใหม่สำหรับไฟล์ที่วาง over_new=ชื่อไฟล์ใหม่: over_ok=ตกลง - upload_efailed=ไม่สามารถเปิดการอัปโหลด : $1 upload_title=อัพโหลดไฟล์ upload_file=ไฟล์ที่จะอัพโหลด @@ -201,11 +185,9 @@ upload_elink=ไม่สามารถอัปโหลดไปยังล upload_zip=คลายการบีบอัดไฟล์ ZIP หรือ TAR ใช่ไหม upload_yes=ใช่แล้วลบ upload_user=อัปโหลดเป็นผู้ใช้ - find_eaccess=คุณไม่ได้รับอนุญาตให้เข้าถึง $1 find_eexist=$1 ไม่มีอยู่ใน $2 find_edir=$1 ไม่ใช่ไดเรกทอรีใน $2 - cancel=ยกเลิก close=ปิด eopen=การดาวน์โหลดล้มเหลว : $1 @@ -216,20 +198,15 @@ chmod_elink=symlink ล้มเหลว : $1 chmod_echown=chown ล้มเหลว : $1 chmod_echmod=chmod ล้มเหลว : $1 chmod_efollow=คุณไม่ได้รับอนุญาตให้แก้ไขลิงก์สัญลักษณ์ - copy_efrom=คุณไม่ได้รับอนุญาตให้คัดลอกจาก '$1' copy_eto=คุณไม่ได้รับอนุญาตให้คัดลอกไปที่ '$1' copy_elink=symlink ล้มเหลว : $1 - delete_eaccess=คุณไม่ได้รับอนุญาตให้ลบ '$1' delete_eroot=ไดเรกทอรี '$1' เป็นหนึ่งในไดเรกทอรีที่คุณ จำกัด และไม่สามารถลบได้ - list_eaccess=คุณไม่ได้รับอนุญาตให้เข้าถึงไดเรกทอรีนี้ list_edir=ไม่สามารถแสดงรายการ $1 : $2 - move_eto=คุณไม่ได้รับอนุญาตให้ย้ายไปที่ '$1' move_afrom=คุณไม่ได้รับอนุญาตให้ย้าย '$1' - acl_user=เข้าถึงไฟล์บนเซิร์ฟเวอร์ในฐานะผู้ใช้ acl_user_def=เช่นเดียวกับการเข้าสู่ระบบ Webmin acl_umask=Umask สำหรับไฟล์ใหม่ @@ -275,7 +252,6 @@ acl_noperms=สามารถเปลี่ยนการอนุญาต acl_nousers=เปลี่ยนความเป็นเจ้าของไฟล์ได้ไหม? acl_filesystems=สามารถดูจุดเมานต์ระบบไฟล์ได้หรือไม่ acl_contents=อนุญาตให้ค้นหาเนื้อหาไฟล์หรือไม่ - share_title=ที่ใช้ร่วมกัน share_samba=ของ windows share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=เชื่อถือได้ที่ไม่ใช่ราก share_s2=เชื่อใจทุกคน share_lro=อ่านเท่านั้น share_lrw=อ่านเขียน - log_create_export=สร้างการส่งออก NFS $1 log_modify_export=แก้ไขการส่งออก NFS $1 log_delete_export=ลบ NFS export $1 @@ -322,7 +297,6 @@ log_move=ย้ายไฟล์ $1 ไปยัง $2 แล้ว log_delete=ไฟล์ที่ถูกลบ $1 log_attr=ตั้งค่าแอตทริบิวต์ในไฟล์ $1 log_acl=ตั้ง ACL เป็นไฟล์ $1 - search_eaccess=คุณไม่ได้รับอนุญาตให้ค้นหาไดเรกทอรีนี้ search_title=ค้นหาไฟล์ search_ok=ค้นหาทันที @@ -351,9 +325,7 @@ search_crit=เกณฑ์การค้นหา search_list=ผลการค้นหา search_down=ดาวน์โหลด search_edown=ไม่มีไฟล์ผลลัพธ์การค้นหาที่เลือกดาวน์โหลด - facl_eaccess=คุณไม่ได้รับอนุญาตให้ตั้งค่า ACL สำหรับไฟล์นี้ - attr_eattrs=ไม่สามารถรับแอตทริบิวต์ : $1 attr_efs=ระบบไฟล์ $1 ไม่รองรับคุณสมบัติ attr_add=เพิ่มคุณสมบัติ @@ -364,13 +336,11 @@ attr_title=คุณสมบัติไฟล์สำหรับ $1 attr_create=เพิ่มคุณสมบัติ attr_edit=แก้ไขคุณสมบัติ attr_ename=ไม่มีชื่อแอตทริบิวต์ - ext_eattrs=ไม่สามารถรับแอตทริบิวต์ EXT : $1 ext_efs=ระบบไฟล์ $1 ไม่รองรับคุณสมบัติ EXT ext_title=แอตทริบิวต์ EXT สำหรับ $1 ext_header=คุณสมบัติของไฟล์ EXT ext_efailed=ไม่สามารถตั้งค่าแอตทริบิวต์สำหรับ $1 : $2 - eattr_A=อย่าอัปเดตเวลาเข้าถึง eattr_a=สามารถต่อท้ายไฟล์เท่านั้น eattr_c=บีบอัดข้อมูลบนดิสก์ @@ -379,7 +349,6 @@ eattr_i=ไม่อนุญาตให้ดัดแปลง eattr_s=ศูนย์บล็อกเมื่อลบ eattr_S=ซิงค์ทุกครั้งหลังจากเขียน eattr_u=บันทึกเนื้อหาสำหรับการลบ - mount_eaccess=คุณไม่ได้รับอนุญาตให้เมานต์ระบบไฟล์ mount_efstab=ไม่มีระบบไฟล์อยู่ที่จุดเมานต์นี้ mount_epoint=$1 ไม่ใช่จุดเชื่อมต่อ @@ -389,22 +358,18 @@ mount_err1=ไม่สามารถเมานต์ $1 : $2 mount_err2=ไม่สามารถยกเลิกการเมานต์ $1 : $2 mount_title1=เมานต์ระบบไฟล์ mount_title2=ยกเลิกการติดตั้งระบบไฟล์ - zip_err=ไม่สามารถแยกไฟล์ : $1 zip_ecmd=ไม่มีคำสั่ง $1 zip_eunzip=การ Unzip ล้มเหลว : $1 zip_ename=ดูเหมือนจะเป็นไฟล์ zip, tar หรือ tar.gz zip_euntar=การยกเลิกการ tar ล้มเหลว : $1 zip_euntar2=การยกเลิกการบีบอัดและยกเลิกการ tar ล้มเหลว : $1 - ddir_title=ดาวน์โหลดไดเรกทอรี ddir_rusure=ในการดาวน์โหลดเนื้อหาของ $1 เป็นไฟล์เก็บถาวรให้คลิกที่ปุ่มประเภทไฟล์เก็บถาวรด้านล่าง ddir_zip=ไปรษณีย์ ddir_tgz=tar.gz ddir_tar=TAR - ebutton=คุณลักษณะนี้ไม่สามารถใช้ได้ - preview_etype=ไม่สามารถใช้งานประเภทไฟล์สำหรับ $1 ได้ preview_etype2=$1 ไม่ได้อยู่ในรูปแบบภาพที่รองรับ preview_ecmd=ไม่ได้ติดตั้งคำสั่ง $1 เพื่อปรับมาตราส่วนอิมเมจนี้ @@ -412,17 +377,14 @@ preview_eimage=สามารถดูตัวอย่างภาพได preview_title=ตัวอย่างของ $1 preview_bad=ไม่สามารถโหลดภาพเพื่อดูตัวอย่าง preview_egd=ไม่สามารถโหลดภาพด้วย GD - html_efailed=ไม่สามารถเปิดตัวแก้ไข HTML : $1 html_title=แก้ไขไฟล์ HTML html_title2=สร้างไฟล์ HTML html_save=บันทึกและปิด html_err=ไม่สามารถบันทึกไฟล์ HTML - history_title=ประวัติเส้นทาง history_ok=ไปที่ history_button=ประวัติศาสตร์ - extract_etype=สามารถแตกไฟล์ได้เท่านั้น extract_title=แตกไฟล์บีบอัด extract_rusure=คุณแน่ใจหรือไม่ว่าต้องการแตกไฟล์บีบอัด : diff --git a/file/lang/tr b/file/lang/tr index 1490c2160..ade6ba2dd 100644 --- a/file/lang/tr +++ b/file/lang/tr @@ -2,7 +2,6 @@ index_title=Dosya Yöneticisi index_nojava=Bu modül java gerektirir, fakat sizin tarayıcınız java'yi desteklemiyor index_eremote=Webmin kullanıcısı $1 ile eşleşen Unix kullanıcısı yok. switch_euser=Unix kullanıcısı mevcut değil! - top_ret=İndeks top_down=Kaydet top_edit=Düzenle @@ -21,13 +20,11 @@ top_share=Paylaştırma top_mount=Mount top_search=Ara top_config=Yapılandırma - right_name=İsim right_size=Boyut right_user=Kullanıcı right_group=Grup right_date=Tarih - edit_enormal=Sadece normal dosyalar düzenlenebilir edit_title=$1 düzenleniyor edit_title2=Dosya oluşturuluyor @@ -44,7 +41,6 @@ edit_eaccess='$1'e kaydedilmesine izininiz yoktur edit_efollow=Sembolink link '$1'e yazmak için izininiz yoktur edit_notfound=$1 metini bulunamadı edit_saveclose=Kaydet & Kapat - info_file=Dosya info_path=Yol: info_type=Tip: @@ -73,7 +69,6 @@ info_read=Oku info_write=Yaz info_list=Listele info_exec=Çalıştır - eacl_eacls=ACL'lerin okunmasında hata oluştu : $1 eacl_acltype=ACL Tipi eacl_aclperms=İzinler @@ -85,7 +80,6 @@ eacl_user=Dosya sahibi $1 eacl_group=Dosya grubu $1 eacl_owner=Dosya sahibi eacl_edefaults=Eğer bir dosyanın öntanımlı ACL'si varsa bu dosya öntanımlı kullanıcı, grup ve diğer ACL'lere de sahip olmalıdır. - acltype_user=Kullanıcı acltype_group=Grup acltype_other=Diğerleri @@ -93,7 +87,6 @@ acltype_mask=Mask acltype_default_user=Öntanımlı Kullanıcı acltype_default_group=Öntanımlı Grup acltype_default_mask=Öntanımlı Mask - delete_mtitle=Birden fazla dosya sil delete_dtitle=Dizin Sil delete_ftitle=Dosya sil @@ -101,13 +94,11 @@ delete_ddesc=$1 dizinini ve içindekileri silmek istediğinizden emin misiniz? delete_fdesc=$1 dosyasını kalıcı olarak silmek istediğinizden emin misiniz? delete_mdesc=Bu dosya ve dizinleri kalıcı olarak silmek istediğinizden emin misiniz? : delete_efailed=$1'i silme işleminde hata oluştu : $2 - mkdir_title=Yeni Dizin mkdir_dir=Yeni dizin: mkdir_eexists=$1 dizini mevcut mkdir_efailed=Dizin oluşturmada hata oluştu : $1 mkdir_eaccess='$1' dizini oluşturmaya hakkınız yok - link_title=Link Oluştur link_from=Link buradan: link_to=Buraya link oluştur: @@ -116,7 +107,6 @@ link_efrom=Link kaynağı tam olarak verilmelidir link_efailed=Link yapılırken hata oluştu : $1 link_efrom2='$1'den link yapmak için izininiz yoktur link_efollow=Sembolik link oluşturmak için izininiz yoktur - rename_title=Yeniden Adlandır $1 rename_old=Eski İsim: rename_new=Yeni İsim: @@ -125,7 +115,6 @@ rename_eexists=$1 dosyası zaten mevcut rename_efailed=Yeniden adlandırmada hata oluştu : $1 rename_eold='$1'i yeniden adlandırmak için izininiz yoktur rename_enew='$1' olarak yeniden adlandırmak için izininiz yoktur - file_type0=Dizin file_type1=Metin Dosyası file_type2=Resim Dosyası @@ -134,29 +123,24 @@ file_type4=Dosya file_type5=Sembolik Link file_type6=Aygıt dosyası file_type7=Pipe - view_enormal=Sadece normal dosyalar görüntülenebilir view_enormal2=Sadece normal dosyalar indirilebilir view_eaccess=$1'e erişim izininiz yoktur view_eopen=$1 'in açılmasında hata oluştu : $2 - view_edir=Bir arşiv sadece bir dizin için oluşturulabilir view_ecomp=Arşiv oluşturulmasında hata oluştu : $1 view_earchive=Arşivleri indirmek için izininiz yoktur view_earchmax=Seçili dizin arşivleme için izin verilen maksimum boyuttan ($1 byte) daha büyük - paste_ecopy=Yapıştırmadan önce kopyalamalı veya kesmelisiniz paste_egone=Kopyalanan dosya $1 artık yok paste_eover=$1 üzerine yazılamaz paste_eself=Dosyayı kendi üzerine yapıştıramazsınız paste_emfailed=Taşımada hata oluştu : $1 paste_ecfailed=Kopyalamada hata oluştu : $1 - over_title=Dosya Mevcut over_msg=$1 dosyası zaten mevcut. Yapıştırılan dosyaya yeni bir isim girmek için aşağıdaki alanı kullanınız. over_new=Yeni dosya ismi: over_ok=Tamam - upload_efailed=Dosyanın yüklenmesinde hata oluştu : $1 upload_title=Dosyayı Yükle upload_file=Yüklenecek dosya @@ -169,11 +153,9 @@ upload_eperm=$1 oluşturmanıza izin verilmedi upload_ewrite=$1'i yazmada hata oluştu : $2. upload_already=$1 dosyası zaten mevcut. Üzerine yazmak istediğinizden emin misiniz? upload_zip=ZIP ya da TAR dosyası açılsın mı? - find_eaccess=$1'e erişim izininiz yoktur find_eexist=$1, $2 içinde mevcut değil find_edir=$1, $2'de bir dizin değil - cancel=İptal close=Kapat eopen=İndirmede hata : $1 @@ -184,18 +166,13 @@ chmod_elink=Sembolik linkte hata oluştu : $1 chmod_echown=chown'da hata oluştu : $1 chmod_echmod=chmod'da hata oluştu : $1 chmod_efollow=Sembolink linkleri düzenlemek için izininiz yoktur - copy_efrom='$1'den kopyalamanıza izin verilmemiştir copy_eto='$1'e kopyalamanıza izin verilmemiştir copy_elink=Sembolik linkte hata oluştu : $1 - delete_eaccess='$1'i silmede hata oluştu - list_eaccess=Bu dizine erişim izininiz yoktur - move_eto='$1'e taşımak için izininiz yoktur move_afrom='$1'i taşımak için izininiz yoktur - acl_user=Sunucudaki dosyalara bu kullanıcı olarak ulaş : acl_user_def=Webmin kullanıcı adı ile aynı acl_umask=Yeni dosyalar için umask @@ -227,7 +204,6 @@ acl_unarchive=Yüklenen arşiv dosyalarını açabilir mi? acl_unarchive1=$yes acl_unarchive0=$no acl_chroot=Dosya yöneticisinin tamamı için chroot dizini - share_title=Paylaştırma share_samba=Windows share_nfs=NFS @@ -256,7 +232,6 @@ share_s1=Root olmayanlara güven share_s2=Herkese güven share_lro=Sadece okunur share_lrw=Okunur-yazılır - log_create_export=NFS sunumu $1 oluşturuldu log_modify_export=NFS sunumu $1 değiştirildi log_delete_export=NFS sunumu $1 silindi @@ -272,7 +247,6 @@ log_relink=$2'ye sembolik link $1 değiştirildi log_copy=$1 dosyası $2'ye kopyalandı log_move=$1 dosyası $2'ye taşındı log_delete=$1 dosyası silindi - search_eaccess=Bu dizinde arama yapmak için izininiz yoktur search_title=Dosya bul search_ok=Şimdi Ara @@ -289,16 +263,13 @@ search_egroup=Grup adı girilmemiş search_esize=Dosya boyutu bir tamsayı olmalıdır search_crit=Armama kriteri search_list=Arama sonuçları - facl_eaccess=Bu dosyanın ACL'lerini belirlemek için izininiz yoktur - eattr_A=Erişim zamanlarını güncelleme eattr_a=Dosyaya sadece ekleme yapılabilir eattr_c=Diskteki veriyi sıkıştır eattr_d=Dump ile yedekleme eattr_i=Değiştirilmesine izin verme eattr_S=Yazmadan sonra her zaman senkronize et - mount_eaccess=Dosya sistemini mount etmek için izininiz yoktur mount_efstab=Bu mount noktasında bir dosya sistemi mevcut değildir mount_epoint=$1 bir mount noktası değildir @@ -308,15 +279,12 @@ mount_err1=$1 'in mount edilmesinde hata oluştu : $2 mount_err2=$1 'in umount edilmesinde hata oluştu : $2 mount_title1=Dosya sistemi mount et mount_title2=Dosya sistemi umount et - zip_err=Dosya açılamıyor : $1 zip_ename=Bir zip, tar ya da tar.gz gibi görünmüyor zip_euntar=Tar dosyasının açılmasında hata oluştu : $1 - ddir_title=İndirme Dizini ddir_rusure=$1 'in içeriğini bir arşiv dosyası olarak indirmek için, aşağıdaki arşiv tipi butonlarından birini tıklayınız. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Bu özellik kullanılamaz diff --git a/file/lang/tr.auto b/file/lang/tr.auto index 0a64e207d..d9ebf7639 100644 --- a/file/lang/tr.auto +++ b/file/lang/tr.auto @@ -1,15 +1,12 @@ index_index=Webmin dizinine dön. - top_preview=Ön izleme top_html=HTML top_attr=attrs top_extract=Ayıkla top_efile=Dosya seçilmedi - edit_searchfor=Aramak edit_elength=Dosya kesildi! edit_textmode=Düz metin moduna geçme - info_apply4=Bu dizinin altındaki dosyalar ve alt dizinler info_apply5=Bu dizin ve tüm alt dizinler info_sizeheader=Dizin boyutu @@ -18,7 +15,6 @@ info_files=Toplam dosya sayısı: info_dirs=Toplam dizinler: info_getsize=Boyut Al info_esize=Boyutlar alınamadı : $1 - eacl_aclname=Başvurmak eacl_add=ACL türünü ekleyin : eacl_eowner=Başvurmak için eksik kullanıcı veya grup @@ -26,23 +22,16 @@ eacl_efailed= $1 : $2 için EKL ayarlanamadı eacl_emask=En fazla bir maske ACL girişi olabilir eacl_edefmask=En fazla bir varsayılan maske ACL girişi olabilir eacl_title=$1 için EKL - acltype_default_other=Varsayılan Diğerleri - rename_eslash=$1 yeni dosya adı bir / - view_ecmd=Arşiv oluşturmak için gereken $1 komutu yüklü değil view_epathinfo=Yol geçersiz karakterler içeriyor - upload_euser=Seçilen kullanıcı mevcut değil. upload_elink=Sembolik bir bağlantıya yüklenemiyor upload_yes=Evet, sonra sil upload_user=Kullanıcı olarak yükle - delete_eroot='$1' dizini, sınırlı olduğunuz dizinlerden biridir ve silinemez - list_edir= $1 : $2 listelenemedi - acl_fyes=Sahipler eşleşirse acl_nodirs=Dizinlere erişimi reddet acl_home=Webmin kullanıcısının giriş dizinini ekle @@ -57,10 +46,8 @@ acl_noperms=Dosya izinlerini değiştirebilir mi? acl_nousers=Dosya sahipliğini değiştirebilir mi? acl_filesystems=Dosya sistemi bağlama noktalarını görebilir mi? acl_contents=Dosya içeriğinin aranmasına izin verilsin mi? - log_attr=$1 dosyasındaki özellikleri ayarlama log_acl=$1 dosyasında EKL'yi ayarla - search_match=Eşleşen dosyalar için search_cont=Metin içeren search_user=Kullanıcının sahibi @@ -73,7 +60,6 @@ search_xdev=Geçmiş bağlarda mı arama yapıyorsunuz? search_ematch=Eşleşen normal ifade eksik search_down=İndir search_edown=İndirilecek arama sonucu dosyası seçilmedi - attr_eattrs=Özellikler alınamadı : $1 attr_efs=$1 dosya sistemi öznitelikleri desteklemiyor attr_add=Özellik Ekle @@ -84,20 +70,16 @@ attr_title=$1 Dosya Öznitelikleri attr_create=Özellik Ekle attr_edit=Özelliği Düzenle attr_ename=Özellik adı eksik - ext_eattrs=EXT özellikleri alınamadı : $1 ext_efs=$1 dosya sistemi EXT niteliklerini desteklemiyor ext_title=$1 için EXT özellikleri ext_header=EXT dosya öznitelikleri ext_efailed= $1 : $2 için özellikler ayarlanamadı - eattr_s=Silme sırasında sıfır bloklar eattr_u=Silme işlemini geri almak için kaydetme - zip_ecmd=$1 komutu eksik zip_eunzip=Açma başarısız oldu : $1 zip_euntar2=Sıkıştırmayı kaldırma ve katranı kaldırma başarısız oldu : $1 - preview_etype=$1 için dosya türü çalıştırılamadı preview_etype2=$1 desteklenen bir görüntü biçiminde değil preview_ecmd=Bu resmi ölçeklendirmek için gereken $1 komutu yüklü değil @@ -105,17 +87,14 @@ preview_eimage=Yalnızca resimler önizlenebilir preview_title=$1 önizlemesi preview_bad=Önizleme için resim yüklenemedi preview_egd=GD ile resim yüklenemedi - html_efailed=HTML düzenleyicisi açılamadı : $1 html_title=HTML Dosyasını Düzenle html_title2=HTML Dosyası Oluştur html_save=Kaydet ve kapat html_err=HTML dosyası kaydedilemedi - history_title=Yol Geçmişi history_ok=Git history_button=Tarih - extract_etype=Yalnızca dosyalar çıkarılabilir extract_title=Sıkıştırılmış Dosyayı Çıkarın extract_rusure=Sıkıştırılmış dosyayı ayıklamak istediğinizden emin misiniz : diff --git a/file/lang/uk b/file/lang/uk index a9d8a7f3c..fe185ad5b 100644 --- a/file/lang/uk +++ b/file/lang/uk @@ -1,296 +1,267 @@ -index_title=Менеджер файлів -index_nojava=Для функціонування цього модуля потрібно java, однак ваш браузер java не підтримує -index_eremote=Немає користувача Unix відповідного користувачу Webmin $1. -switch_euser=Користувач Unix не існує! - -top_ret=Меню -top_down=Зберегти -top_edit=Змінити -top_refresh=Обновити -top_info=Властивості -top_eacl=ACL -top_attr=Атрибути -top_ext=EXT -top_delete=Видалити -top_new=Посилання -top_upload=Завантажити -top_rename=Перейменувати -top_copy=Копіювати -top_cut=Вирізувати -top_paste=Уставити -top_share=Мережа -top_search=Знайти - -right_name=Ім'я -right_size=Розмір -right_user=Користувач -right_group=Група -right_date=Дата - -edit_enormal=Можна редагувати тільки звичайні файли -edit_title=Редагування $1 -edit_title2=Створення файлу -edit_filename=Ім'я файлу: -edit_eover=$1 не може бути перезаписаний -edit_esave=Не удалося зберегти файл : $1 -edit_eaccess=У вас недостатньо правий для збереження '$1' - -info_file=Файл -info_path=Шлях: -info_type=Тип: -info_size=Розмір: -info_mod=Змінений: -info_link=Посилання на: -info_perms=Права -info_user=Користувача: -info_group=Групи: -info_other=Інших: -info_octal=Восьмеричний вид: -info_sticky=Біт sticky: -info_sticky2=Тільки власники можуть видаляти файли -info_own=Приналежність -info_setuid=Біт setuid: -info_setuid2=Виконувати від імені користувача -info_setgid=Біт setgid: -info_setgid2=Файли успадковують групу -info_setgid3=Виконувати від імені групи -info_apply=Застосувати зміни -info_apply1=Тільки до цього каталогу -info_apply2=До цього каталогу і його файлів -info_apply3=До Цього каталогу і всіх його підкаталогів -info_efailed=Не удалося обновити $1 : $2 -info_read=Читання -info_write=Запис -info_list=Перегляд -info_exec=Виконання - -eacl_eacls=Не удалося вважати ACL : $1 -eacl_acltype=Тип ACL -eacl_aclname=Застосувати до -eacl_aclperms=Права -eacl_add=Додати ACL : -eacl_remove=Видалити ACL -eacl_efs=Ця файлова система $1 не підтримує ACL -eacl_create=Створити ACL -eacl_edit=Змінити ACL -eacl_user=Власник файлу $1 -eacl_group=Група файлу $1 -eacl_eowner=Не зазначений чи користувач група для який вносяться зміни -eacl_efailed=Не удалося установити ACL для $1 : $2 -eacl_emask=There can be at most one mask ACL entry -eacl_edefmask=There can be at most one default mask ACL entry -eacl_title=ACL для $1 -eacl_owner=Власник файлу -eacl_edefaults=If a file has any default ACL, it must have default user, group and other ACLs. - -acltype_user=Користувач -acltype_group=Група -acltype_other=Інші -acltype_mask=Маска -acltype_default_user=Користувач за замовчуванням -acltype_default_group=Група за замовчуванням -acltype_default_other=Інші за замовчуванням -acltype_default_mask=Маска за замовчуванням - -delete_mtitle=Видалення декількох файлів -delete_dtitle=Видалення каталогу -delete_ftitle=Видалення файлу -delete_ddesc=Назавжди видалити каталог $1 із усім його вмістом? -delete_fdesc=Назавжди видалити файл $1 ? -delete_mdesc=Назавжди видалити зазначені файли і каталоги? : -delete_efailed=Не удалося видалити $1 : $2 - -mkdir_title=Новий каталог -mkdir_dir=Новий каталог: -mkdir_eexists=$1 вже існує -mkdir_efailed=Не удалося створити каталог : $1 -mkdir_eaccess=У вас недостатньо правий для створення '$1' - -link_title=Створення посилання -link_from=Джерело: -link_to=Місце призначення: -link_eexists=$1 вже існує -link_efrom=У вас недостатньо правий для створення посилання '$1' -link_efailed=Створити посилання не удалося : $1 -link_efollow=У вас недостатньо правий для створення посилань - -rename_title=Перейменування $1 -rename_old=Старе ім'я: -rename_new=Нове ім'я: -rename_ok=Перейменувати -rename_eexists=Файл з ім'ям $1 вже існує -rename_efailed=Перейменувати не удалося : $1 -rename_eold=У вас недостатньо правий для перейменування '$1' -rename_enew=У вас недостатньо правий для перейменування в '$1' - -file_type0=Каталог -file_type1=Текстовий файл -file_type2=Файл зображення -file_type3=Бінарний файл -file_type4=Файл -file_type5=Символьне посилання -file_type6=Файл пристрою -file_type7=Канал - -view_enormal=Можна переглядати тільки звичайні файли -view_enormal2=Можна завантажувати тільки звичайні файли -view_eaccess=У вас недостатньо правий для доступу до $1 -view_eopen=Не удалося відкрити $1 : $2 - -paste_ecopy=Перед вставкою необхідно чи вирізувати копіювати -paste_egone=Копійован файл $1 більше не існує -paste_eover=$1 не може бути перезаписаний -paste_eself=Не можна переписати файл самим собою -paste_emfailed=Не удалося перемістити : $1 -paste_ecfailed=Не удалося скопіювати : $1 - -over_title=Файл існує -over_msg=Файл $1 вже існує. Укажіть для файлу, що вставляється, нове ім'я. -over_new=Нове ім'я файлу: -over_ok=ОК - -upload_efailed=Не удалося почати завантаження : $1 -upload_title=Завантаження файлу -upload_file=Файл для завантаження -upload_dir=Завантажувати в каталог -upload_ok=Завантажити -upload_conv=Перетворити переклади рядків DOS? -upload_efile=Не обраний файл для завантаження. -upload_edir=Каталог для завантаження не існує. -upload_eperm=У вас недостатньо правий для створення $1 -upload_ewrite=Не удалося записати в $1 : $2. - -find_eaccess=У вас недостатньо правий для доступу до $1 -find_eexist=$1 не існує в $2 -find_edir=$1 не є каталогом у $2 - -cancel=Скасування -chmod_eaccess=У вас недостатньо правий для доступу до '$1' -chmod_euser=$1 : немає такого користувача -chmod_egroup=$1 : немає такої групи -chmod_elink=Помилка при виклику symlink : $1 -chmod_echown=Помилка при виклику chown : $1 -chmod_echmod=Помилка при виклику chmod : $1 -chmod_efollow=У вас недостатньо правий для зміни символьних посилань - -copy_efrom=У вас недостатньо правий для копіювання з '$1' -copy_eto=У вас недостатньо правий для копіювання в '$1' -copy_elink=Помилка при виклику symlink : $1 - -delete_eaccess=У вас недостатньо правий для видалення '$1' - -list_eaccess=У вас недостатньо правий для доступу до цього каталогу -list_edir=Не удалося переглянути $1 : $2 - -move_eto=У вас недостатньо правий для переміщення в '$1' -move_afrom=У вас недостатньо правий для переміщення '$1' - -acl_user=Звертатися до файлів на сервері під ім'ям користувача -acl_user_def=Користувача Webmin -acl_umask=Umask для нових файлів -acl_follow=Завжди переходити по символьних посиланнях? -acl_ro=Режим тільки для читання? -acl_dirs=Дозволяти доступ тільки до каталогів -acl_home=Включаючи домашній каталог користувача Webmin -acl_log=Вести журнал усіх змін файлів? -acl_goto=Відкривати перший доступний каталог? - -share_title=Доступ по мережі -share_samba=Windows -share_nfs=NFS -share_son=Доступ з мережі Windows дозволений -share_soff=Доступ з мережі Windows заборонений -share_writable=Запис дозволений? -share_available=Доступний у даний момент? -share_sheader=Настроювання доступу -share_only=Тільки -share_guest=Доступ без аутентифікації (Guest)? -share_comment=Коментар -share_nheader=Настроювання доступу по протоколі NFS -share_non=Доступ по NFS дозволений -share_noff=Доступ по NFS заборонений -share_desc=Опис -share_ro=Вузли, що мають доступ тільки для читання -share_rw=Вузли, що мають доступ для читання і запису -share_root=Вузли, для яких дозволений доступ із правами root -share_none=Немає -share_all=Усі -share_listed=Зазначені.. -share_host=Вузли -share_opts=Настроювання -share_s0=Довіряти nobody -share_s1=Довіряти не-root -share_s2=Довіряти всім -share_lro=Тільки читання -share_lrw=Читання/запис - -log_create_export=Створений ресурс NFS $1 -log_modify_export=Змінений ресурс NFS $1 -log_delete_export=Вилучений ресурс NFS $1 -log_create_share=Створений ресурс Samba $1 -log_modify_share=Змінений ресурс Samba $1 -log_delete_share=Вилучений ресурс Samba $1 -log_save=Збережений файл $1 -log_chmod=Змінені права на файл $1 -log_mkdir=Створений каталог $1 -log_upload=Завантажений файл $1 -log_link=Створена символьне посилання $1 на $2 -log_relink=Змінена символьне посилання $1 на $2 -log_copy=Скопійований файл $1 у $2 -log_move=Переміщений файл $1 у $2 -log_delete=Вилучений файл $1 -log_attr=Змінені атрибути файлу $1 -log_acl=Для файлу $1 призначений ACL - -search_eaccess=У вас недостатньо правий для пошуку в цьому каталозі -search_title=Пошук файлів -search_ok=Шукати -search_dir=Шукати в каталозі -search_match=Файли співпадаючі з -search_user=Приналежні користувачу -search_group=Приналежні групі -search_any=Любою -search_type=Тип файлу -search_types_=Любою -search_types_f=Файл -search_types_d=Каталог -search_types_l=Символьне посилання -search_types_p=Іменований канал -search_size=Розмір файлу -search_more=Більш -search_less=Менш -search_xdev=Шукати в підмонтованих файлових системах? -search_edir=Каталог для пошуку чи не зазначений зазначений невірно -search_ematch=Регулярне вираження для пошуку чи не зазначене зазначено невірно -search_euser=Ім'я користувача чи не зазначене зазначено невірно -search_egroup=Ім'я групи чи не зазначене зазначено невірно -search_esize=Розмір файлу повинний бути цілим числом -search_crit=Критерій пошуку -search_list=Результати пошуку - -facl_eaccess=У вас недостатньо правий для зміни ACL для цього файлу - -attr_eattrs=Не удалося вважати атрибути : $1 -attr_efs=Файлова система $1 не підтримує атрибути -attr_add=Додати атрибут -attr_name=Назва атрибута -attr_value=Значення атрибута -attr_efailed=Не удалося установити атрибути для $1 : $2 -attr_title=Атрибути файлу для $1 -attr_create=Додати атрибут -attr_edit=Змінити атрибут -attr_ename=Не зазначена назва атрибута - -ext_eattrs=Не удалося одержати атрибути EXT : $1 -ext_efs=Файлова система $1 не підтримує атрибути EXT -ext_title=Атрибути EXT для $1 -ext_header=Атрибути EXT файлу -ext_efailed=Не удалося установити атрибути EXT $1 : $2 - -eattr_A=Не обновляти час доступу -eattr_a=Можливо тільки додавання до файлу -eattr_c=Стискати дані на диску -eattr_d=Не здійснювати резервне копіювання за допомогою dump -eattr_s=Обнуляти блоки при видаленні -eattr_S=Завжди синхронізувати після запису -eattr_u=Зберігати уміст файлу для відновлення +index_title=Менеджер файлів +index_nojava=Для функціонування цього модуля потрібно java, однак ваш браузер java не підтримує +index_eremote=Немає користувача Unix відповідного користувачу Webmin $1. +switch_euser=Користувач Unix не існує! +top_ret=Меню +top_down=Зберегти +top_edit=Змінити +top_refresh=Обновити +top_info=Властивості +top_eacl=ACL +top_attr=Атрибути +top_ext=EXT +top_delete=Видалити +top_new=Посилання +top_upload=Завантажити +top_rename=Перейменувати +top_copy=Копіювати +top_cut=Вирізувати +top_paste=Уставити +top_share=Мережа +top_search=Знайти +right_name=Ім'я +right_size=Розмір +right_user=Користувач +right_group=Група +right_date=Дата +edit_enormal=Можна редагувати тільки звичайні файли +edit_title=Редагування $1 +edit_title2=Створення файлу +edit_filename=Ім'я файлу: +edit_eover=$1 не може бути перезаписаний +edit_esave=Не удалося зберегти файл : $1 +edit_eaccess=У вас недостатньо правий для збереження '$1' +info_file=Файл +info_path=Шлях: +info_type=Тип: +info_size=Розмір: +info_mod=Змінений: +info_link=Посилання на: +info_perms=Права +info_user=Користувача: +info_group=Групи: +info_other=Інших: +info_octal=Восьмеричний вид: +info_sticky=Біт sticky: +info_sticky2=Тільки власники можуть видаляти файли +info_own=Приналежність +info_setuid=Біт setuid: +info_setuid2=Виконувати від імені користувача +info_setgid=Біт setgid: +info_setgid2=Файли успадковують групу +info_setgid3=Виконувати від імені групи +info_apply=Застосувати зміни +info_apply1=Тільки до цього каталогу +info_apply2=До цього каталогу і його файлів +info_apply3=До Цього каталогу і всіх його підкаталогів +info_efailed=Не удалося обновити $1 : $2 +info_read=Читання +info_write=Запис +info_list=Перегляд +info_exec=Виконання +eacl_eacls=Не удалося вважати ACL : $1 +eacl_acltype=Тип ACL +eacl_aclname=Застосувати до +eacl_aclperms=Права +eacl_add=Додати ACL : +eacl_remove=Видалити ACL +eacl_efs=Ця файлова система $1 не підтримує ACL +eacl_create=Створити ACL +eacl_edit=Змінити ACL +eacl_user=Власник файлу $1 +eacl_group=Група файлу $1 +eacl_eowner=Не зазначений чи користувач група для який вносяться зміни +eacl_efailed=Не удалося установити ACL для $1 : $2 +eacl_emask=There can be at most one mask ACL entry +eacl_edefmask=There can be at most one default mask ACL entry +eacl_title=ACL для $1 +eacl_owner=Власник файлу +eacl_edefaults=If a file has any default ACL, it must have default user, group and other ACLs. +acltype_user=Користувач +acltype_group=Група +acltype_other=Інші +acltype_mask=Маска +acltype_default_user=Користувач за замовчуванням +acltype_default_group=Група за замовчуванням +acltype_default_other=Інші за замовчуванням +acltype_default_mask=Маска за замовчуванням +delete_mtitle=Видалення декількох файлів +delete_dtitle=Видалення каталогу +delete_ftitle=Видалення файлу +delete_ddesc=Назавжди видалити каталог $1 із усім його вмістом? +delete_fdesc=Назавжди видалити файл $1 ? +delete_mdesc=Назавжди видалити зазначені файли і каталоги? : +delete_efailed=Не удалося видалити $1 : $2 +mkdir_title=Новий каталог +mkdir_dir=Новий каталог: +mkdir_eexists=$1 вже існує +mkdir_efailed=Не удалося створити каталог : $1 +mkdir_eaccess=У вас недостатньо правий для створення '$1' +link_title=Створення посилання +link_from=Джерело: +link_to=Місце призначення: +link_eexists=$1 вже існує +link_efrom=У вас недостатньо правий для створення посилання '$1' +link_efailed=Створити посилання не удалося : $1 +link_efollow=У вас недостатньо правий для створення посилань +rename_title=Перейменування $1 +rename_old=Старе ім'я: +rename_new=Нове ім'я: +rename_ok=Перейменувати +rename_eexists=Файл з ім'ям $1 вже існує +rename_efailed=Перейменувати не удалося : $1 +rename_eold=У вас недостатньо правий для перейменування '$1' +rename_enew=У вас недостатньо правий для перейменування в '$1' +file_type0=Каталог +file_type1=Текстовий файл +file_type2=Файл зображення +file_type3=Бінарний файл +file_type4=Файл +file_type5=Символьне посилання +file_type6=Файл пристрою +file_type7=Канал +view_enormal=Можна переглядати тільки звичайні файли +view_enormal2=Можна завантажувати тільки звичайні файли +view_eaccess=У вас недостатньо правий для доступу до $1 +view_eopen=Не удалося відкрити $1 : $2 +paste_ecopy=Перед вставкою необхідно чи вирізувати копіювати +paste_egone=Копійован файл $1 більше не існує +paste_eover=$1 не може бути перезаписаний +paste_eself=Не можна переписати файл самим собою +paste_emfailed=Не удалося перемістити : $1 +paste_ecfailed=Не удалося скопіювати : $1 +over_title=Файл існує +over_msg=Файл $1 вже існує. Укажіть для файлу, що вставляється, нове ім'я. +over_new=Нове ім'я файлу: +over_ok=ОК +upload_efailed=Не удалося почати завантаження : $1 +upload_title=Завантаження файлу +upload_file=Файл для завантаження +upload_dir=Завантажувати в каталог +upload_ok=Завантажити +upload_conv=Перетворити переклади рядків DOS? +upload_efile=Не обраний файл для завантаження. +upload_edir=Каталог для завантаження не існує. +upload_eperm=У вас недостатньо правий для створення $1 +upload_ewrite=Не удалося записати в $1 : $2. +find_eaccess=У вас недостатньо правий для доступу до $1 +find_eexist=$1 не існує в $2 +find_edir=$1 не є каталогом у $2 +cancel=Скасування +chmod_eaccess=У вас недостатньо правий для доступу до '$1' +chmod_euser=$1 : немає такого користувача +chmod_egroup=$1 : немає такої групи +chmod_elink=Помилка при виклику symlink : $1 +chmod_echown=Помилка при виклику chown : $1 +chmod_echmod=Помилка при виклику chmod : $1 +chmod_efollow=У вас недостатньо правий для зміни символьних посилань +copy_efrom=У вас недостатньо правий для копіювання з '$1' +copy_eto=У вас недостатньо правий для копіювання в '$1' +copy_elink=Помилка при виклику symlink : $1 +delete_eaccess=У вас недостатньо правий для видалення '$1' +list_eaccess=У вас недостатньо правий для доступу до цього каталогу +list_edir=Не удалося переглянути $1 : $2 +move_eto=У вас недостатньо правий для переміщення в '$1' +move_afrom=У вас недостатньо правий для переміщення '$1' +acl_user=Звертатися до файлів на сервері під ім'ям користувача +acl_user_def=Користувача Webmin +acl_umask=Umask для нових файлів +acl_follow=Завжди переходити по символьних посиланнях? +acl_ro=Режим тільки для читання? +acl_dirs=Дозволяти доступ тільки до каталогів +acl_home=Включаючи домашній каталог користувача Webmin +acl_log=Вести журнал усіх змін файлів? +acl_goto=Відкривати перший доступний каталог? +share_title=Доступ по мережі +share_samba=Windows +share_nfs=NFS +share_son=Доступ з мережі Windows дозволений +share_soff=Доступ з мережі Windows заборонений +share_writable=Запис дозволений? +share_available=Доступний у даний момент? +share_sheader=Настроювання доступу +share_only=Тільки +share_guest=Доступ без аутентифікації (Guest)? +share_comment=Коментар +share_nheader=Настроювання доступу по протоколі NFS +share_non=Доступ по NFS дозволений +share_noff=Доступ по NFS заборонений +share_desc=Опис +share_ro=Вузли, що мають доступ тільки для читання +share_rw=Вузли, що мають доступ для читання і запису +share_root=Вузли, для яких дозволений доступ із правами root +share_none=Немає +share_all=Усі +share_listed=Зазначені.. +share_host=Вузли +share_opts=Настроювання +share_s0=Довіряти nobody +share_s1=Довіряти не-root +share_s2=Довіряти всім +share_lro=Тільки читання +share_lrw=Читання/запис +log_create_export=Створений ресурс NFS $1 +log_modify_export=Змінений ресурс NFS $1 +log_delete_export=Вилучений ресурс NFS $1 +log_create_share=Створений ресурс Samba $1 +log_modify_share=Змінений ресурс Samba $1 +log_delete_share=Вилучений ресурс Samba $1 +log_save=Збережений файл $1 +log_chmod=Змінені права на файл $1 +log_mkdir=Створений каталог $1 +log_upload=Завантажений файл $1 +log_link=Створена символьне посилання $1 на $2 +log_relink=Змінена символьне посилання $1 на $2 +log_copy=Скопійований файл $1 у $2 +log_move=Переміщений файл $1 у $2 +log_delete=Вилучений файл $1 +log_attr=Змінені атрибути файлу $1 +log_acl=Для файлу $1 призначений ACL +search_eaccess=У вас недостатньо правий для пошуку в цьому каталозі +search_title=Пошук файлів +search_ok=Шукати +search_dir=Шукати в каталозі +search_match=Файли співпадаючі з +search_user=Приналежні користувачу +search_group=Приналежні групі +search_any=Любою +search_type=Тип файлу +search_types_=Любою +search_types_f=Файл +search_types_d=Каталог +search_types_l=Символьне посилання +search_types_p=Іменований канал +search_size=Розмір файлу +search_more=Більш +search_less=Менш +search_xdev=Шукати в підмонтованих файлових системах? +search_edir=Каталог для пошуку чи не зазначений зазначений невірно +search_ematch=Регулярне вираження для пошуку чи не зазначене зазначено невірно +search_euser=Ім'я користувача чи не зазначене зазначено невірно +search_egroup=Ім'я групи чи не зазначене зазначено невірно +search_esize=Розмір файлу повинний бути цілим числом +search_crit=Критерій пошуку +search_list=Результати пошуку +facl_eaccess=У вас недостатньо правий для зміни ACL для цього файлу +attr_eattrs=Не удалося вважати атрибути : $1 +attr_efs=Файлова система $1 не підтримує атрибути +attr_add=Додати атрибут +attr_name=Назва атрибута +attr_value=Значення атрибута +attr_efailed=Не удалося установити атрибути для $1 : $2 +attr_title=Атрибути файлу для $1 +attr_create=Додати атрибут +attr_edit=Змінити атрибут +attr_ename=Не зазначена назва атрибута +ext_eattrs=Не удалося одержати атрибути EXT : $1 +ext_efs=Файлова система $1 не підтримує атрибути EXT +ext_title=Атрибути EXT для $1 +ext_header=Атрибути EXT файлу +ext_efailed=Не удалося установити атрибути EXT $1 : $2 +eattr_A=Не обновляти час доступу +eattr_a=Можливо тільки додавання до файлу +eattr_c=Стискати дані на диску +eattr_d=Не здійснювати резервне копіювання за допомогою dump +eattr_s=Обнуляти блоки при видаленні +eattr_S=Завжди синхронізувати після запису +eattr_u=Зберігати уміст файлу для відновлення diff --git a/file/lang/uk.auto b/file/lang/uk.auto index 501396335..5ea411c07 100644 --- a/file/lang/uk.auto +++ b/file/lang/uk.auto @@ -1,12 +1,10 @@ index_index=Поверніться до індексу Webmin. - top_preview=Попередній перегляд top_html=HTML top_extract=Витяг top_mount=Гора top_config=Налаштування top_efile=Файл не вибрано - edit_goto=Йти до edit_find=Знайдіть edit_gotoline=Переходьте до лінії @@ -19,7 +17,6 @@ edit_notfound=Текст $1 не знайдено edit_saveclose=Зберегти та закрити edit_elength=Файл був усічений! edit_textmode=Перехід на звичайний текстовий режим - info_apply4=Файли в цьому каталозі та підкаталогах info_apply5=Цей каталог та всі підкаталоги info_sizeheader=Розмір каталогу @@ -28,30 +25,23 @@ info_files=Всього файлів: info_dirs=Всього каталогів: info_getsize=Отримати розмір info_esize=Не вдалося отримати розміри : $1 - link_efrom2=Вам заборонено посилатися на "$1" - rename_eslash=Нове ім'я файлу $1 містить / - view_edir=Архів можна створити лише для каталогу view_ecmd=Команда $1, необхідна для створення архіву, не встановлена view_ecomp=Не вдалося створити архів : $1 view_earchive=Вам заборонено завантажувати архіви view_earchmax=Вибраний каталог більший за максимально дозволений для архівування ($1 байт) view_epathinfo=Шлях містить недійсні символи - upload_euser=Вибраного користувача не існує. upload_already=Файл $1 вже існує. Ви впевнені, що хочете перезаписати його? upload_elink=Неможливо завантажити на символічне посилання upload_zip=Видалити файл ZIP або TAR? upload_yes=Так, потім видаліть upload_user=Завантажити як користувач - close=Закрити eopen=Помилка завантаження : $1 - delete_eroot=Каталог '$1' є одним із тих, до яких ви обмежені, і тому їх не можна видалити - acl_fyes=Якщо власники відповідають acl_nodirs=Заборонити доступ до каталогів acl_max=Максимальний розмір завантаження @@ -88,13 +78,10 @@ acl_noperms=Чи можна змінити права доступу до фай acl_nousers=Чи можна змінити право власності на файл? acl_filesystems=Чи можна бачити точки монтажу файлової системи? acl_contents=Дозволити пошук вмісту файлу? - search_cont=Зміст тексту search_down=Завантажити search_edown=Не вибрано файл результатів пошуку для завантаження - eattr_i=Не допускати модифікацій - mount_eaccess=Вам не дозволяється монтувати файлові системи mount_efstab=У цій точці монтажу не існує жодної файлової системи mount_epoint=$1 не є точкою кріплення @@ -104,22 +91,18 @@ mount_err1=Не вдалося встановити $1 : $2 mount_err2=Не вдалося зняти $1 : $2 mount_title1=Змонтувати файлову систему mount_title2=Видалити файлову систему - zip_err=Не вдалося витягнути файл : $1 zip_ecmd=Відсутня команда $1 zip_eunzip=Не вдалося скасувати скасування : $1 zip_ename=Не здається файлом zip, tar або tar.gz zip_euntar=Помилка відміни : $1 zip_euntar2=Не вдалося відключити та скасувати дію : $1 - ddir_title=Каталог завантажень ddir_rusure=Щоб завантажити вміст $1 як файл архіву, натисніть одну з кнопок типу архіву нижче. ddir_zip=ZIP ddir_tgz=TAR.GZ ddir_tar=ТАР - ebutton=Ця функція недоступна - preview_etype=Не вдалось виправити тип файлу для $1 preview_etype2=$1 не підтримується у форматі зображення preview_ecmd=Команда $1, необхідна для масштабування цього зображення, не встановлена @@ -127,17 +110,14 @@ preview_eimage=Можна переглянути лише зображення preview_title=Попередній перегляд $1 preview_bad=Не вдалося завантажити зображення для попереднього перегляду preview_egd=Не вдалося завантажити зображення в GD - html_efailed=Не вдалося відкрити редактор HTML : $1 html_title=Редагувати HTML-файл html_title2=Створіть HTML-файл html_save=Зберегти та закрити html_err=Не вдалося зберегти HTML-файл - history_title=Історія шляху history_ok=Йти до history_button=Історія - extract_etype=Витягувати можна лише файли extract_title=Витягнути стиснутий файл extract_rusure=Ви впевнені, що хочете витягти стиснутий файл : diff --git a/file/lang/ur.auto b/file/lang/ur.auto index 8b37060d3..05535c9b2 100644 --- a/file/lang/ur.auto +++ b/file/lang/ur.auto @@ -3,7 +3,6 @@ index_nojava=اس ماڈیول میں جاوا کو کام کرنے کی ضرو index_eremote=کوئی یونکس صارف نہیں ہے جو Webmin لاگ ان$1 سے مماثل ہے۔ index_index=Return to Webmin index. switch_euser=یونکس صارف موجود نہیں ہے! - top_ret=اشاریہ top_down=محفوظ کریں top_preview=پیش نظارہ @@ -27,13 +26,11 @@ top_mount=پہاڑ top_search=مل top_config=تشکیل دیں top_efile=کوئی فائل منتخب نہیں کی گئی - right_name=نام right_size=سائز right_user=صارف right_group=گروپ right_date=تاریخ - edit_enormal=صرف عام فائلوں میں ہی ترمیم کی جاسکتی ہے edit_title=ترمیم$1 edit_title2=فائل بنانا @@ -53,7 +50,6 @@ edit_notfound=متن$1 نہیں ملا edit_saveclose=محفوظ کریں اور بند کریں edit_elength=فائل چھوٹی تھی! edit_textmode=سادہ ٹیکسٹ موڈ میں سوئچ کریں - info_file=فائل info_path=راستہ: info_type=قسم: @@ -90,7 +86,6 @@ info_files=کل فائلیں: info_dirs=کل ڈائریکٹریاں: info_getsize=سائز حاصل کریں info_esize=سائز حاصل کرنے میں ناکام :$1 - eacl_eacls=ACLs کو پڑھنے میں ناکام :$1 eacl_acltype=ACL قسم eacl_aclname=پر لاگو @@ -109,7 +104,6 @@ eacl_edefmask=زیادہ سے زیادہ ایک طے شدہ ماسک ACL اند eacl_title=$1 کے لئے ACL eacl_owner=فائل کا مالک eacl_edefaults=اگر کسی فائل میں کوئ ڈیفالٹ ACL ہوتا ہے تو اس میں ڈیفالٹ صارف ، گروپ اور دیگر ACL ضرور ہوتے ہیں۔ - acltype_user=صارف acltype_group=گروپ acltype_other=دوسرے @@ -118,7 +112,6 @@ acltype_default_user=ڈیفالٹ صارف acltype_default_group=طے شدہ گروپ acltype_default_other=پہلے سے طے شدہ acltype_default_mask=ڈیفالٹ ماسک - delete_mtitle=متعدد فائلوں کو حذف کریں delete_dtitle=ڈائریکٹری حذف کریں delete_ftitle=فائل کو ڈیلیٹ کریں @@ -126,13 +119,11 @@ delete_ddesc=کیا آپ واقعی$1 ڈائریکٹری اور اس کے تما delete_fdesc=کیا آپ واقعی$1 فائل کو مستقل طور پر ختم کرنا چاہتے ہیں؟ delete_mdesc=کیا آپ واقعی ان فائلوں اور ڈائریکٹریوں کو مستقل طور پر حذف کرنا چاہتے ہیں؟ : delete_efailed= $1 : $2 کو حذف کرنے میں ناکام - mkdir_title=نئی ڈائرکٹری mkdir_dir=نئی ڈائرکٹری: mkdir_eexists=$1 پہلے سے موجود ہے mkdir_efailed=ڈائریکٹری بنانا ناکام ہو گیا :$1 mkdir_eaccess=آپ کو '$1' بنانے کی اجازت نہیں ہے - link_title=لنک بنائیں link_from=سے لنک: link_to=لنک: @@ -141,7 +132,6 @@ link_efrom=لنک کا ذریعہ ایک مطلق راہ ہونا چاہئے link_efailed=لنک ناکام :$1 link_efrom2=آپ کو '$1' سے لنک کرنے کی اجازت نہیں ہے link_efollow=آپ کو سیملنکس بنانے کی اجازت نہیں ہے - rename_title=$1 کا نام تبدیل کریں rename_old=پرانا نام: rename_new=نیا نام: @@ -151,7 +141,6 @@ rename_eslash=نئی فائل کے نام$1 میں ایک / rename_efailed=نام تبدیل نہیں ہوا :$1 rename_eold=آپ کو '$1' کا نام تبدیل کرنے کی اجازت نہیں ہے۔ rename_enew=آپ کو '$1' کا نام تبدیل کرنے کی اجازت نہیں ہے۔ - file_type0=ڈائرکٹری file_type1=ٹیکسٹ فائل file_type2=تصویری فائل @@ -160,31 +149,26 @@ file_type4=فائل file_type5=علامتی لنک file_type6=ڈیوائس فائل file_type7=پائپ - view_enormal=صرف عام فائلوں کو دیکھا جاسکتا ہے view_enormal2=صرف عام فائلیں ہی ڈاؤن لوڈ کی جاسکتی ہیں view_eaccess=آپ کو$1 تک رسائی کی اجازت نہیں ہے view_eopen= $1 : $2 کھولنے میں ناکام - view_edir=ایک آرکائیو صرف ایک ڈائرکٹری کے لئے بنایا جاسکتا ہے view_ecmd=آرکائیو بنانے کے لئے درکار کمانڈ$1 انسٹال نہیں ہوا ہے view_ecomp=آرکائیو بنانے میں ناکام :$1 view_earchive=آپ کو آرکائیوز ڈاؤن لوڈ کرنے کی اجازت نہیں ہے view_earchmax=منتخب ڈائریکٹری آرکائیو کی زیادہ سے زیادہ اجازت شدہ ($1 بائٹس) سے بڑی ہے view_epathinfo=راستے میں غلط حرف ہیں - paste_ecopy=چسپاں کرنے سے پہلے آپ کو کاٹنا یا کاپی کرنا ضروری ہے paste_egone=کاپی فائل$1 اب موجود نہیں ہے paste_eover=$1 کو اوور رائٹ نہیں کیا جاسکتا paste_eself=آپ خود بھی فائل چسپاں نہیں کرسکتے ہیں paste_emfailed=منتقل ناکام :$1 paste_ecfailed=کاپی ناکام ہوگئی :$1 - over_title=فائل موجود ہے over_msg=فائل$1 پہلے سے موجود ہے۔ پیسٹ فائل کے لئے نیا فائل نام داخل کرنے کے لئے نیچے والے فیلڈ کا استعمال کریں۔ over_new=نیا فائل نام: over_ok=ٹھیک ہے - upload_efailed=اپ لوڈ کو کھولنے میں ناکام :$1 upload_title=اپ لوڈ فائل upload_file=اپ لوڈ کرنے کیلئے فائل @@ -201,11 +185,9 @@ upload_elink=علامتی لنک پر اپ لوڈ نہیں کیا جاسکتا upload_zip=زپ یا ٹی اے آر فائل کو غیر کمپریس کریں؟ upload_yes=ہاں ، پھر حذف کریں upload_user=بطور صارف اپ لوڈ کریں - find_eaccess=آپ کو$1 تک رسائی کی اجازت نہیں ہے find_eexist=$1 $2 میں موجود نہیں ہے find_edir=$1 $2 میں ڈائریکٹری نہیں ہے - cancel=منسوخ کریں close=بند کریں eopen=ڈاؤن لوڈ ناکام :$1 @@ -216,20 +198,15 @@ chmod_elink=syMLink ناکام :$1 chmod_echown=ڈاؤن لوڈ ناکام :$1 chmod_echmod=chmod ناکام :$1 chmod_efollow=آپ کو علامتی لنکس میں ترمیم کرنے کی اجازت نہیں ہے - copy_efrom=آپ کو '$1' سے کاپی کرنے کی اجازت نہیں ہے copy_eto=آپ کو '$1' پر کاپی کرنے کی اجازت نہیں ہے copy_elink=syMLink ناکام :$1 - delete_eaccess=آپ کو '$1' کو حذف کرنے کی اجازت نہیں ہے delete_eroot=ڈائریکٹری '$1' ان میں سے ایک ہے جس پر آپ محدود ہیں ، اور اسی وجہ سے اسے حذف نہیں کیا جاسکتا ہے - list_eaccess=آپ کو اس ڈائرکٹری تک رسائی کی اجازت نہیں ہے list_edir= $1 : $2 کی فہرست میں ناکام - move_eto=آپ کو '$1' میں جانے کی اجازت نہیں ہے move_afrom=آپ کو '$1' منتقل کرنے کی اجازت نہیں ہے - acl_user=بطور صارف سرور پر فائلوں تک رسائی حاصل کریں acl_user_def=ویب مین لاگ ان کی طرح acl_umask=نئی فائلوں کے لئے عماسک @@ -275,7 +252,6 @@ acl_noperms=فائل کی اجازت تبدیل کر سکتے ہیں؟ acl_nousers=فائل کی ملکیت تبدیل کر سکتے ہیں؟ acl_filesystems=فائل سسٹم ماؤنٹ پوائنٹ دیکھ سکتے ہیں؟ acl_contents=فائل کے مشمولات کو تلاش کرنے کی اجازت دیں؟ - share_title=شیئرنگ share_samba=ونڈوز share_nfs=این ایف ایس @@ -304,7 +280,6 @@ share_s1=غیر جڑ پر اعتماد کریں share_s2=سب پر بھروسہ کریں share_lro=صرف پڑھو share_lrw=پڑھ لکھ - log_create_export=این ایف ایس ایکسپورٹ$1 بنائی گئی log_modify_export=ترمیم شدہ NFS برآمد$1 log_delete_export=حذف شدہ NFS برآمد$1 @@ -322,7 +297,6 @@ log_move=فائل$1 سے$2 میں منتقل کردی گئ log_delete=فائل$1 کو حذف کیا گیا log_attr=فائل$1 پر صفات مرتب کریں log_acl=فائل$1 پر ACL مرتب کریں - search_eaccess=آپ کو یہ ڈائرکٹری تلاش کرنے کی اجازت نہیں ہے search_title=فائلیں تلاش کریں search_ok=ابھی تلاش کریں @@ -351,9 +325,7 @@ search_crit=تلاش کا معیار search_list=تلاش کے نتائج search_down=ڈاؤن لوڈ کریں search_edown=ڈاؤن لوڈ کرنے کے لئے تلاش کے نتائج کی کوئی فائل منتخب نہیں ہوئی - facl_eaccess=آپ کو اس فائل کے لئے ACLs سیٹ کرنے کی اجازت نہیں ہے - attr_eattrs=صفات حاصل کرنے میں ناکام :$1 attr_efs=فائل سسٹم$1 اوصاف کی حمایت نہیں کرتا ہے attr_add=انتساب شامل کریں @@ -364,13 +336,11 @@ attr_title=فائل صفات $1 کے لئے attr_create=انتساب شامل کریں attr_edit=خصوصیت میں ترمیم کریں attr_ename=منسوب انتساب نام - ext_eattrs=EXT صفات :$1 حاصل کرنے میں ناکام ext_efs=فائل سسٹم$1 EXT صفات کی حمایت نہیں کرتا ہے ext_title=$1 کے لئے EXT اوصاف ext_header=فائل کی خصوصیات ext_efailed= $1 : $2 کیلئے صفات متعین کرنے میں ناکام - eattr_A=رسائی کے اوقات کو اپ ڈیٹ نہ کریں eattr_a=صرف فائل میں شامل کرسکتے ہیں eattr_c=ڈسک پر ڈیٹا سکیڑیں @@ -379,7 +349,6 @@ eattr_i=ترمیم کی اجازت نہ دیں eattr_s=حذف کرتے وقت صفر بلاکس eattr_S=ہمیشہ لکھنے کے بعد ہم آہنگی کریں eattr_u=حذف کرنے کیلئے مشمولات محفوظ کریں - mount_eaccess=آپ کو فائل سسٹم کو ماؤنٹ کرنے کی اجازت نہیں ہے mount_efstab=اس ماؤنٹ پوائنٹ پر کوئی فائل سسٹم موجود نہیں ہے mount_epoint=$1 ماؤنٹ پوائنٹ نہیں ہے @@ -389,22 +358,18 @@ mount_err1= $1 : $2 کو ماؤنٹ کرنے میں ناکام mount_err2= $1 : $2 کو ماؤنٹ کرنے میں ناکام mount_title1=ماؤنٹ فائل سسٹم mount_title2=غیر ماؤنٹ فائل سسٹم - zip_err=فائل نہیں نکال سکی :$1 zip_ecmd=$1 کمانڈ غائب ہے zip_eunzip=ان زپ ناکام ہوگئی :$1 zip_ename=زپ ، ٹار یا tar.gz فائل نہیں دکھائی دیتی ہے zip_euntar=غیر ٹار ناکام :$1 zip_euntar2=غیر کمپریس اور غیر ٹار ناکام :$1 - ddir_title=ڈائرکٹری ڈاؤن لوڈ کریں ddir_rusure=آرکائیو فائل کے بطور$1 کے مندرجات کو ڈاؤن لوڈ کرنے کے لئے ، ذیل میں محفوظ شدہ دستاویزات میں سے کسی ایک بٹن پر کلک کریں۔ ddir_zip=زپ ddir_tgz=TAR.GZ ddir_tar=ٹار - ebutton=یہ خصوصیت دستیاب نہیں ہے - preview_etype=$1 کے لئے فائل ٹائپ کام نہیں کرسکے preview_etype2=$1 معاون تصویری شکل میں نہیں ہے preview_ecmd=اس تصویر کو اسکیل کرنے کے لئے درکار کمانڈ$1 انسٹال نہیں ہے @@ -412,17 +377,14 @@ preview_eimage=صرف تصاویر کا پیش نظارہ کیا جاسکتا ہ preview_title=$1 کا پیش نظارہ preview_bad=پیش نظارہ کے لئے امیج کو لوڈ نہیں کیا جاسکا preview_egd=GD کے ساتھ شبیہہ لوڈ کرنے میں ناکام - html_efailed=HTML ایڈیٹر کھولنے میں ناکام :$1 html_title=HTML فائل میں ترمیم کریں html_title2=HTML فائل بنائیں html_save=محفوظ کریں اور بند کریں html_err=HTML فائل کو محفوظ کرنے میں ناکام - history_title=راستہ کی تاریخ history_ok=کے پاس جاؤ history_button=تاریخ - extract_etype=صرف فائلیں نکالی جاسکتی ہیں extract_title=کمپریسڈ فائل کو نکالیں extract_rusure=کیا آپ واقعی کمپریسڈ فائل کو نکالنا چاہتے ہیں : diff --git a/file/lang/vi.auto b/file/lang/vi.auto index 8e01ad438..722f26ced 100644 --- a/file/lang/vi.auto +++ b/file/lang/vi.auto @@ -3,7 +3,6 @@ index_nojava=Mô-đun này yêu cầu Java hoạt động, nhưng trình duyệt index_eremote=Không có người dùng Unix phù hợp với thông tin đăng nhập Webmin $1. index_index=Quay lại Chỉ mục Webmin. switch_euser=Người dùng Unix không tồn tại! - top_ret=Mục lục top_down=Tiết kiệm top_preview=Xem trước @@ -27,13 +26,11 @@ top_mount=Núi top_search=Tìm thấy top_config=Cấu hình top_efile=Không tài liệu nào được chọn - right_name=Tên right_size=Kích thước right_user=Người sử dụng right_group=Nhóm right_date=Ngày - edit_enormal=Chỉ các tệp bình thường có thể được chỉnh sửa edit_title=Chỉnh sửa $1 edit_title2=Tạo tập tin @@ -53,7 +50,6 @@ edit_notfound=Không tìm thấy văn bản $1 edit_saveclose=Lưu và đóng edit_elength=Tập tin đã bị cắt ngắn! edit_textmode=Chuyển sang chế độ văn bản thuần túy - info_file=Tập tin info_path=Con đường: info_type=Kiểu: @@ -90,7 +86,6 @@ info_files=Tổng số tệp: info_dirs=Tổng số thư mục: info_getsize=Nhận kích thước info_esize=Không thể lấy kích thước : $1 - eacl_eacls=Không thể đọc ACL : $1 eacl_acltype=Loại ACL eacl_aclname=Nộp đơn @@ -109,7 +104,6 @@ eacl_edefmask=Có thể có nhiều nhất một mục ACL mặt nạ mặc đ eacl_title=ACL cho $1 eacl_owner=Chủ sở hữu tệp eacl_edefaults=Nếu một tệp có bất kỳ ACL mặc định, nó phải có người dùng, nhóm và các ACL mặc định khác. - acltype_user=Người sử dụng acltype_group=Nhóm acltype_other=Khác @@ -118,7 +112,6 @@ acltype_default_user=Người dùng mặc định acltype_default_group=Nhóm mặc định acltype_default_other=Mặc định Khác acltype_default_mask=Mặt nạ mặc định - delete_mtitle=Xóa nhiều tập tin delete_dtitle=Xóa thư mục delete_ftitle=Xóa tài liệu @@ -126,13 +119,11 @@ delete_ddesc=Bạn có chắc chắn muốn xóa vĩnh viễn thư mục $1 và delete_fdesc=Bạn có chắc chắn muốn xóa vĩnh viễn tệp $1 không? delete_mdesc=Bạn có chắc chắn muốn xóa vĩnh viễn các tệp và thư mục này không? : delete_efailed=Không thể xóa $1 : $2 - mkdir_title=Từ điển mới mkdir_dir=Từ điển mới: mkdir_eexists=$1 đã tồn tại mkdir_efailed=Tạo thư mục không thành công : $1 mkdir_eaccess=Bạn không được phép tạo '$1' - link_title=Tạo đường link link_from=Liên kết từ: link_to=Liên kết đến: @@ -141,7 +132,6 @@ link_efrom=Nguồn liên kết phải là một đường dẫn tuyệt đối link_efailed=Liên kết thất bại : $1 link_efrom2=Bạn không được phép liên kết từ '$1' link_efollow=Bạn không được phép tạo liên kết tượng trưng - rename_title=Đổi tên $1 rename_old=Tên Cu: rename_new=Tên mới: @@ -151,7 +141,6 @@ rename_eslash=Tên tệp mới $1 chứa a / rename_efailed=Đổi tên không thành công : $1 rename_eold=Bạn không được phép đổi tên '$1' rename_enew=Bạn không được phép đổi tên thành '$1' - file_type0=Danh mục file_type1=Tập tin văn bản file_type2=Tập tin hình ảnh @@ -160,31 +149,26 @@ file_type4=Tập tin file_type5=Liên kết tượng trưng file_type6=Tập tin thiết bị file_type7=Ống - view_enormal=Chỉ có thể xem các tập tin bình thường view_enormal2=Chỉ có thể tải xuống các tệp bình thường view_eaccess=Bạn không được phép truy cập $1 view_eopen=Không thể mở $1 : $2 - view_edir=Một kho lưu trữ chỉ có thể được tạo cho một thư mục view_ecmd=Lệnh $1 cần thiết để tạo tệp lưu trữ chưa được cài đặt view_ecomp=Không thể tạo tệp lưu trữ : $1 view_earchive=Bạn không được phép tải tài liệu lưu trữ view_earchmax=Thư mục đã chọn lớn hơn mức tối đa được phép lưu trữ ($1 byte) view_epathinfo=Đường dẫn chứa các ký tự không hợp lệ - paste_ecopy=Bạn phải cắt hoặc sao chép trước khi dán paste_egone=Tệp đã sao chép $1 không còn tồn tại paste_eover=$1 không thể được ghi đè paste_eself=Bạn không thể dán một tập tin lên chính nó paste_emfailed=Di chuyển không thành công : $1 paste_ecfailed=Sao chép thất bại : $1 - over_title=File tồn tại over_msg=Tệp $1 đã tồn tại. Sử dụng trường bên dưới để nhập tên tệp mới cho tệp đã dán. over_new=Tên tệp mới: over_ok=Đồng ý - upload_efailed=Không thể mở tải lên : $1 upload_title=Cập nhật dử liệu upload_file=Tập tin để tải lên @@ -201,11 +185,9 @@ upload_elink=Không thể tải lên một liên kết tượng trưng upload_zip=Giải nén tập tin ZIP hoặc TAR? upload_yes=Có, sau đó xóa upload_user=Tải lên với tư cách người dùng - find_eaccess=Bạn không được phép truy cập $1 find_eexist=$1 không tồn tại trong $2 find_edir=$1 không phải là thư mục trong $2 - cancel=Hủy bỏ close=Đóng eopen=Tải xuống thất bại : $1 @@ -216,20 +198,15 @@ chmod_elink=liên kết tượng trưng không thành công : $1 chmod_echown=chown thất bại : $1 chmod_echmod=chmod thất bại : $1 chmod_efollow=Bạn không được phép chỉnh sửa các liên kết tượng trưng - copy_efrom=Bạn không được phép sao chép từ '$1' copy_eto=Bạn không được phép sao chép vào '$1' copy_elink=liên kết tượng trưng không thành công : $1 - delete_eaccess=Bạn không được phép xóa '$1' delete_eroot=Thư mục '$1' là một trong những thư mục mà bạn bị giới hạn và vì vậy không thể xóa được - list_eaccess=Bạn không được phép truy cập thư mục này list_edir=Không thể liệt kê $1 : $2 - move_eto=Bạn không được phép chuyển đến '$1' move_afrom=Bạn không được phép di chuyển '$1' - acl_user=Truy cập tệp trên máy chủ với tư cách người dùng acl_user_def=Giống như đăng nhập Webmin acl_umask=Umask cho các tập tin mới @@ -275,7 +252,6 @@ acl_noperms=Có thể thay đổi quyền truy cập tập tin? acl_nousers=Có thể thay đổi quyền sở hữu tập tin? acl_filesystems=Có thể thấy các điểm gắn kết hệ thống tập tin? acl_contents=Cho phép tìm kiếm nội dung tập tin? - share_title=Chia sẻ share_samba=các cửa sổ share_nfs=NFS @@ -304,7 +280,6 @@ share_s1=Tin tưởng không root share_s2=Tin tưởng tất cả mọi người share_lro=Chỉ đọc share_lrw=Đọc viết - log_create_export=Tạo NFS xuất $1 log_modify_export=Xuất khẩu NFS đã sửa đổi $1 log_delete_export=Đã xóa xuất NFS $1 @@ -322,7 +297,6 @@ log_move=Đã chuyển tệp $1 sang $2 log_delete=Đã xóa tệp $1 log_attr=Đặt thuộc tính trên tệp $1 log_acl=Đặt ACL trên tệp $1 - search_eaccess=Bạn không được phép tìm kiếm thư mục này search_title=Tìm tập tin search_ok=Tìm kiếm ngay bây giờ @@ -351,9 +325,7 @@ search_crit=Tiêu chí tìm kiếm search_list=Kết quả tìm kiếm search_down=Tải xuống search_edown=Không có tệp kết quả tìm kiếm để tải về được chọn - facl_eaccess=Bạn không được phép đặt ACL cho tệp này - attr_eattrs=Không thể nhận thuộc tính : $1 attr_efs=Hệ thống tập tin $1 không hỗ trợ các thuộc tính attr_add=Thêm thuộc tính @@ -364,13 +336,11 @@ attr_title=Thuộc tính tệp cho $1 attr_create=Thêm thuộc tính attr_edit=Chỉnh sửa thuộc tính attr_ename=Thiếu tên thuộc tính - ext_eattrs=Không thể nhận các thuộc tính EXT : $1 ext_efs=Hệ thống tập tin $1 không hỗ trợ các thuộc tính EXT ext_title=Thuộc tính EXT cho $1 ext_header=Thuộc tính tệp EXT ext_efailed=Không thể đặt thuộc tính cho $1 : $2 - eattr_A=Không cập nhật thời gian truy cập eattr_a=Chỉ có thể nối vào tập tin eattr_c=Nén dữ liệu trên đĩa @@ -379,7 +349,6 @@ eattr_i=Không cho phép sửa đổi eattr_s=Không chặn khi xóa eattr_S=Luôn đồng bộ sau khi viết eattr_u=Lưu nội dung cho undetetion - mount_eaccess=Bạn không được phép gắn kết hệ thống tập tin mount_efstab=Không có hệ thống tập tin nào tồn tại ở điểm gắn kết này mount_epoint=$1 không phải là điểm gắn kết @@ -389,22 +358,18 @@ mount_err1=Không thể gắn kết $1 : $2 mount_err2=Không thể hủy gắn kết $1 : $2 mount_title1=Hệ thống tập tin gắn kết mount_title2=Hệ thống tập tin un-mount - zip_err=Không thể giải nén tập tin : $1 zip_ecmd=Thiếu lệnh $1 zip_eunzip=Giải nén thất bại : $1 zip_ename=Không xuất hiện dưới dạng tệp zip, tar hoặc tar.gz zip_euntar=Un-tar thất bại : $1 zip_euntar2=Un-nén và un-tar thất bại : $1 - ddir_title=Tải xuống thư mục ddir_rusure=Để tải xuống nội dung của $1 dưới dạng tệp lưu trữ, nhấp vào một trong các nút loại lưu trữ bên dưới. ddir_zip=Mã bưu điện ddir_tgz=TAR.GZ ddir_tar=TAR - ebutton=Tính năng này không có sẵn - preview_etype=Không thể tìm ra loại tệp cho $1 preview_etype2=$1 không ở định dạng hình ảnh được hỗ trợ preview_ecmd=Lệnh $1 cần thiết để chia tỷ lệ hình ảnh này chưa được cài đặt @@ -412,17 +377,14 @@ preview_eimage=Chỉ có thể xem trước hình ảnh preview_title=Xem trước $1 preview_bad=Không thể tải hình ảnh để xem trước preview_egd=Không thể tải hình ảnh với GD - html_efailed=Không thể mở trình soạn thảo HTML : $1 html_title=Chỉnh sửa tệp HTML html_title2=Tạo tệp HTML html_save=Lưu và Đóng html_err=Không thể lưu tệp HTML - history_title=Lịch sử con đường history_ok=Đi đến history_button=Lịch sử - extract_etype=Chỉ các tập tin có thể được giải nén extract_title=Giải nén tập tin nén extract_rusure=Bạn có chắc chắn muốn giải nén tệp nén : diff --git a/file/lang/zh b/file/lang/zh index 7e71c3e4b..fb3fc0a2a 100644 --- a/file/lang/zh +++ b/file/lang/zh @@ -2,7 +2,6 @@ index_title=文件管理器 index_nojava=本模块需要java支持才能工作，但是您的浏缆器不支持java index_eremote=没有区配 Webmin登录名 $1 的Unix用户。 switch_euser=Unix 用户不存在！ - top_ret=索引 top_down=保存 top_edit=编辑 @@ -22,13 +21,11 @@ top_share=共享 top_mount=加载 top_search=查找 top_config=配置 - right_name=名称 right_size=大小 right_user=用户 right_group=组 right_date=日期 - edit_enormal=只能编辑正常文件 edit_title=正在编辑 $1 edit_title2=正在创建文件 @@ -45,7 +42,6 @@ edit_esave=保存文件失败 ： $1 edit_eaccess=你未被允许保存 '$1' edit_notfound=未找到文本 $1 edit_saveclose=保存并关闭 - info_file=文件 info_path=路径： info_type=类型： @@ -74,7 +70,6 @@ info_read=读取 info_write=写入 info_list=列表 info_exec=执行 - eacl_eacls=读取 ACLs 失败 ： $1 eacl_acltype=ACL 类型 eacl_aclname=应用到 @@ -93,7 +88,6 @@ eacl_edefmask=最多只能有一个默认掩码 ACL 条目 eacl_title=$1的ACL eacl_owner=文件所有者 eacl_edefaults=如果一个文件有任何默认的ACL，则它必须有默认用户，组和其他的ACLs。 - acltype_user=用户 acltype_group=组 acltype_other=其他 @@ -102,7 +96,6 @@ acltype_default_user=默认用户 acltype_default_group=默认组 acltype_default_other=默认其他 acltype_default_mask=默认掩码 - delete_mtitle=删除多个文件 delete_dtitle=删除目录 delete_ftitle=删除文件 @@ -110,13 +103,11 @@ delete_ddesc=确实要永久删除目录 $1 及其内容？ delete_fdesc=确实要永久删除文件 $1？ delete_mdesc=确实要永久删除这些目录和文件？ ： delete_efailed=删除 $1 ：$2 失败 - mkdir_title=新建目录 mkdir_dir=新建目录： mkdir_eexists=$1 已经存在 mkdir_efailed=创建目录 $1 失败 mkdir_eaccess=你无权创建 '$1' - link_title=创建链接 link_from=链接自： link_to=链接到： @@ -124,7 +115,6 @@ link_eexists=$1 已经存在 link_efrom=你无权链接自 '$1' link_efailed=链接失败：$1 link_efollow=你无权创建符号链接 - rename_title=重命名$1 rename_old=原名： rename_new=新名： @@ -133,7 +123,6 @@ rename_eexists=文件 $1 已存在 rename_efailed=重命名失败： $1 rename_eold=你无权重命名 '$1' rename_enew=你无权重命名为 '$1' - file_type0=目录 file_type1=文本文件 file_type2=映象文件 @@ -142,24 +131,20 @@ file_type4=文件 file_type5=符号链接 file_type6=设备文件 file_type7=管道 - view_enormal=只能查看正常文件 view_enormal2=只能下载正常文件 view_eaccess=你无权访问 $1 view_eopen=打开 $1： $2 失败 - paste_ecopy=在粘贴之前必须剪切或拷贝 paste_egone=拷贝的文件 $1 已经不存在 paste_eover=$1 不能覆盖 paste_eself=不能将文件粘贴至自身 paste_emfailed=移动失败：$1 paste_ecfailed=拷贝失败：$1 - over_title=文件存在 over_msg=文件 $1 已经存在。在下面的字段中为要粘贴的文件输入一个新名。 over_new=新文件名： over_ok=确定 - upload_efailed=打开上传失败：$1 upload_title=上传文件 upload_file=要上传的文件 @@ -171,11 +156,9 @@ upload_edir=上传目录不存在。 upload_eperm=你无权创建 $1 upload_ewrite=写入 $1：$2 失败。 upload_already=文件 $1 已经存在。您确定要覆盖它吗？ - find_eaccess=你无权访问 $1 find_eexist=在$2中不存在$1 find_edir=$1 不是 $2 中的目录 - cancel=取消 close=关闭 chmod_eaccess=你无权访问 '$1' @@ -185,19 +168,14 @@ chmod_elink=symlink 失败：$1 chmod_echown=chown 失败：$1 chmod_echmod=chmod 失败：$1 chmod_efollow=您未被允许编辑符号链接 - copy_efrom=你无权从 '$1' 拷贝 copy_eto=你无权拷贝到 '$1' copy_elink=symlink 失败 '$1' - delete_eaccess=你无权删除 '$1' - list_eaccess=你无权访问此目录 list_edir=显示列表失败 $1 ： $2 - move_eto=你无权移动到 '$1' move_afrom=你无权移动 '$1' - acl_user=作为用户访问服务器的文件 acl_user_def=与Webmin登录相同 acl_umask=对新文件去除掩码 @@ -207,7 +185,6 @@ acl_dirs=仅允许访问目录 acl_home=包含Webmin用户的主目录？ acl_log=对所有文件的修改保存日志？ acl_goto=打开最先允许的目录？ - share_title=共享 share_samba=Windows share_nfs=NFS @@ -236,7 +213,6 @@ share_s1=信任非 Root 用户 share_s2=信任所有人 share_lro=只读 share_lrw=读写 - log_create_export=已创建的 NFS 导出 $1 log_modify_export=已修改的 NFS 导出 $1 log_delete_export=已删除的 NFS 导出 $1 @@ -254,7 +230,6 @@ log_move=已移动的文件 $1 到 $2 log_delete=已删除的文件 $1 log_attr=设置文件 $1 的属性 log_acl=设置文件 $1 的ACL - search_eaccess=您无权搜索此目录 search_title=找到文件 search_ok=现在搜索 @@ -280,9 +255,7 @@ search_egroup=丢失组名 search_esize=文件大小值必须是整数 search_crit=搜索标准 search_list=搜索结果 - facl_eaccess=你未被允许设置此文件的ACLs - attr_eattrs=获取属性失败：$1 attr_efs=文件系统 $1 不支持属性 attr_add=添加属性 @@ -293,13 +266,11 @@ attr_title=$1的文件属性 attr_create=添加属性 attr_edit=编辑属性 attr_ename=缺少属性名称 - ext_eattrs=获取扩展属性失败： $1 ext_efs=文件系统 $1 不支持扩展属性 ext_title=$1 的扩展属性 ext_header=扩展文件属性 ext_efailed=为 $1 ： $2设置属性失败 - eattr_A=不更新访问次数 eattr_a=只能添加到文件末尾 eattr_c=压缩磁盘数据 @@ -308,7 +279,6 @@ eattr_i=不允许修改 eattr_s=删除时将块归零 eattr_S=写入后总是同步 eattr_u=为反删除保存内容 - mount_eaccess=你未被允许加载文件系统 mount_efstab=此加载点上不存在文件系统 mount_epoint=$1 不是加载点 diff --git a/file/lang/zh.auto b/file/lang/zh.auto index 34da2916a..89804d8cf 100644 --- a/file/lang/zh.auto +++ b/file/lang/zh.auto @@ -1,14 +1,11 @@ index_index=返回到Webmin索引。 - top_preview=预习 top_html=的HTML top_extract=提取 top_efile=未选择文件 - edit_efollow=不允许您写入符号链接“$1” edit_elength=文件被截断了！ edit_textmode=切换到纯文本模式 - info_apply4=该目录和子目录下的文件 info_apply5=该目录及其所有子目录 info_sizeheader=目录大小 @@ -17,28 +14,21 @@ info_files=文件总数： info_dirs=目录总数： info_getsize=取得尺寸 info_esize=无法获取大小： $1 - link_efrom2=您不允许从“$1”链接 - rename_eslash=新文件名 $1包含/ - view_edir=只能为目录创建档案 view_ecmd=未安装创建档案所需的命令 $1 view_ecomp=无法创建存档： $1 view_earchive=您无权下载档案 view_earchmax=所选目录大于允许的最大归档文件（$1字节） view_epathinfo=路径包含无效字符 - upload_euser=所选用户不存在。 upload_elink=无法上传到符号链接 upload_zip=解压缩ZIP或TAR文件？ upload_yes=是的，然后删除 upload_user=以用户身份上传 - eopen=下载失败： $1 - delete_eroot=目录“$1”是您受限制的目录之一，因此无法删除 - acl_fyes=如果所有者匹配 acl_nodirs=拒绝访问目录 acl_max=最大上传大小 @@ -75,26 +65,21 @@ acl_noperms=可以更改文件权限吗？ acl_nousers=可以更改文件所有权吗？ acl_filesystems=可以看到文件系统挂载点吗？ acl_contents=允许搜索文件内容？ - search_cont=包含文字 search_down=下载 search_edown=没有要下载的搜索结果文件 - zip_err=无法提取文件： $1 zip_ecmd=缺少 $1命令 zip_eunzip=解压缩失败： $1 zip_ename=似乎不是zip，tar或tar.gz文件 zip_euntar=取消压缩失败： $1 zip_euntar2=解压缩和解压缩失败： $1 - ddir_title=下载目录 ddir_rusure=要将 $1的内容下载为存档文件，请单击下面的存档类型按钮之一。 ddir_zip=压缩 ddir_tgz=塔格 ddir_tar=柏油 - ebutton=此功能不可用 - preview_etype=无法计算 $1的文件类型 preview_etype2=$1不是受支持的图像格式 preview_ecmd=未安装缩放此图像所需的命令 $1 @@ -102,17 +87,14 @@ preview_eimage=仅图像可以预览 preview_title=$1的预览 preview_bad=无法加载图片进行预览 preview_egd=无法使用GD加载图像 - html_efailed=无法打开HTML编辑器： $1 html_title=编辑HTML档案 html_title2=创建HTML文件 html_save=保存并关闭 html_err=无法保存HTML文件 - history_title=路径记录 history_ok=去 history_button=历史 - extract_etype=只能提取文件 extract_title=提取压缩文件 extract_rusure=您确定要提取压缩文件： diff --git a/file/lang/zh_TW b/file/lang/zh_TW index 99bf3a037..e9be83f66 100644 --- a/file/lang/zh_TW +++ b/file/lang/zh_TW @@ -1,6 +1,5 @@ index_title=檔案管理者 index_nojava=這個模組需要 Java 才能正確的運作, 但是您的瀏覽器似乎不支援 Java - top_ret=返回 top_down=下載 top_edit=編輯 @@ -15,13 +14,11 @@ top_cut=剪下 top_paste=貼上 top_search=搜尋 top_config=設定 - right_name=名稱 right_size=大小 right_user=使用者 right_group=群組 right_date=日期 - edit_enormal=只能編輯一般的檔案 edit_title=編輯 $1 中 edit_title2=建立檔案中 @@ -40,7 +37,6 @@ edit_efollow=您不被允許寫入符號連結 '$1' edit_notfound=找不到這個 $1 文件 edit_saveclose=儲存並關閉 edit_elength=檔案被截斷！ - info_file=檔案 info_path=路徑: info_type=類別: @@ -68,21 +64,18 @@ info_read=讀取 info_write=寫入 info_list=列出 info_exec=執行 - -delete_mtitle=刪除多個檔案 -delete_dtitle=刪除目錄 -delete_ftitle=刪除檔案 -delete_ddesc=您確定要永久的刪除目錄 $1 與其所有內容嗎？ -delete_fdesc=您確定要永久的刪除檔案 $1 嗎？ -delete_mdesc=您確定要永久的刪除這些檔案和目錄嗎？ : -delete_efailed=無法刪除 $1 : $2 - +delete_mtitle=刪除多個檔案 +delete_dtitle=刪除目錄 +delete_ftitle=刪除檔案 +delete_ddesc=您確定要永久的刪除目錄 $1 與其所有內容嗎？ +delete_fdesc=您確定要永久的刪除檔案 $1 嗎？ +delete_mdesc=您確定要永久的刪除這些檔案和目錄嗎？ : +delete_efailed=無法刪除 $1 : $2 mkdir_title=新增目錄 mkdir_dir=目錄: mkdir_eexists=$1 已經存在 mkdir_efailed=建立目錄失敗 : $1 mkdir_eaccess=您不被允許建立 '$1' - link_title=建立連結 link_from=連結自: link_to=連結到: @@ -90,7 +83,6 @@ link_eexists=$1 已經存在 link_efrom=您不被允許連結 '$1' link_efailed=連結失敗 : $1 link_efollow=您不被允許建立符號連結 - rename_title=變更名稱 $1 rename_old=舊檔名: rename_new=變更為: @@ -99,7 +91,6 @@ rename_eexists=叫做 $1 的檔案已經存在 rename_efailed=改名失敗 : $1 rename_eold=您不被允許改名自 '$1' rename_enew=您不被允許改名成 '$1' - file_type0=目錄 file_type1=文字檔 file_type2=影像檔 @@ -108,18 +99,15 @@ file_type4=檔案 file_type5=符號連結 file_type6=設備控制檔 file_type7=管線 - view_enormal=只有一般的檔案可以被檢視 view_eaccess=您不被允許存取 $1 view_eopen=無法開啟n $1 : $2 - paste_ecopy=在您貼上要先剪下或複製 paste_egone=複製的檔案 $1 已經不存在 paste_eover=$1 無法被蓋寫 paste_eself=您不能把檔案貼到本身上 paste_emfailed=移動失敗 : $1 paste_ecfailed=拷貝失敗 : $1 - upload_efailed=開啟上傳失敗 : $1 upload_title=上傳檔案 upload_file=要上傳的檔案 @@ -134,11 +122,9 @@ upload_already=檔案 $1 已經存在，您確定要覆蓋它嗎？ upload_elink=無法上傳符號連結 upload_zip=要解壓縮 ZIP 或 TAR 的檔案嗎？ upload_yes=是的，然後刪除 - find_eaccess=您不被允許存取 $1 find_eexist=$1 不存在於 $2 find_edir=$1 不是一個目錄在 $2 - cancel=取消 close=關閉 eopen=下載失敗：$1 @@ -148,23 +134,17 @@ chmod_egroup=$1 : 沒有這個群組 chmod_elink=符號連結失敗d : $1 chmod_echown=變更擁有者失敗 : $1 chmod_echmod=變更權限失敗 : $1 - copy_efrom=您不被允許拷貝自 '$1' copy_eto=您不被允許拷貝到 '$1' copy_elink=符號連結失敗 : $1 - delete_eaccess=您不被允許刪除 '$1' - list_eaccess=您不被允許存取這個目錄 - move_eto=您不被允許移動到 '$1' move_afrom=您不被允許移動自 '$1' - acl_user=以使用者權限存取伺服器上的檔案 acl_umask=建立檔案的遮罩 acl_follow=是否跟隨符號連結? acl_dirs=只允許存取到目錄 - search_eaccess=您不被允許搜尋這個目錄 search_title=搜尋檔案 search_ok=搜尋 diff --git a/file/lang/zh_TW.auto b/file/lang/zh_TW.auto index 04973ab39..65d7678ec 100644 --- a/file/lang/zh_TW.auto +++ b/file/lang/zh_TW.auto @@ -1,7 +1,6 @@ index_eremote=沒有與Webmin登錄名 $1匹配的Unix用戶。 index_index=返回到Webmin索引。 switch_euser=Unix用戶不存在！ - top_preview=預習 top_html=的HTML top_eacl=訪問控制列表 @@ -11,9 +10,7 @@ top_extract=提取 top_share=分享中 top_mount=安裝 top_efile=未選擇文件 - edit_textmode=切換到純文本模式 - info_octal=八進制： info_apply4=此目錄和子目錄下的文件 info_apply5=該目錄及其所有子目錄 @@ -23,7 +20,6 @@ info_files=文件總數： info_dirs=目錄總數： info_getsize=取得尺寸 info_esize=無法獲取大小： $1 - eacl_eacls=無法讀取ACL： $1 eacl_acltype=ACL類型 eacl_aclname=適用於 @@ -42,7 +38,6 @@ eacl_edefmask=最多可以有一個默認的掩碼ACL條目 eacl_title=$1的ACL eacl_owner=檔案擁有者 eacl_edefaults=如果文件具有任何默認ACL，則它必須具有默認用戶，組和其他ACL。 - acltype_user=用戶 acltype_group=組 acltype_other=其他 @@ -51,11 +46,8 @@ acltype_default_user=默認用戶 acltype_default_group=默認組 acltype_default_other=默認其他 acltype_default_mask=默認遮罩 - link_efrom2=您不允許從“$1”鏈接 - rename_eslash=新文件名 $1包含/ - view_enormal2=只能下載普通文件 view_edir=只能為目錄創建檔案 view_ecmd=未安裝創建檔案所需的命令 $1 @@ -63,21 +55,15 @@ view_ecomp=無法創建存檔： $1 view_earchive=您無權下載檔案 view_earchmax=所選目錄大於允許的最大歸檔文件（$1字節） view_epathinfo=路徑包含無效字符 - over_title=文件已存在 over_msg=文件 $1已存在。使用下面的字段為粘貼的文件輸入新的文件名。 over_new=新文件名： over_ok=好 - upload_euser=所選用戶不存在。 upload_user=以用戶身份上傳 - chmod_efollow=您無權編輯符號鏈接 - delete_eroot=目錄“$1”是您受限制的目錄之一，因此無法刪除 - list_edir=無法列出 $1 : $2 - acl_user_def=與Webmin登錄相同 acl_fyes=如果所有者匹配 acl_ro=只讀模式？ @@ -119,7 +105,6 @@ acl_noperms=可以更改文件權限嗎？ acl_nousers=可以更改文件所有權嗎？ acl_filesystems=可以看到文件系統掛載點嗎？ acl_contents=允許搜索文件內容？ - share_title=分享中 share_samba=視窗 share_nfs=NFS @@ -148,7 +133,6 @@ share_s1=非根信任 share_s2=相信大家 share_lro=只讀 share_lrw=可讀寫 - log_create_export=已創建NFS導出 $1 log_modify_export=修改後的NFS導出 $1 log_delete_export=已刪除NFS導出 $1 @@ -166,13 +150,10 @@ log_move=已將文件 $1移至 $2 log_delete=已刪除文件 $1 log_attr=在文件 $1上設置屬性 log_acl=在文件 $1上設置ACL - search_cont=包含文字 search_down=下載 search_edown=沒有選擇要下載的搜索結果文件 - facl_eaccess=您無權為此文件設置ACL - attr_eattrs=無法獲取屬性： $1 attr_efs=文件系統 $1不支持屬性 attr_add=添加屬性 @@ -183,13 +164,11 @@ attr_title=$1的文件屬性 attr_create=添加屬性 attr_edit=編輯屬性 attr_ename=缺少屬性名稱 - ext_eattrs=無法獲取EXT屬性： $1 ext_efs=文件系統 $1不支持EXT屬性 ext_title=$1的EXT屬性 ext_header=EXT文件屬性 ext_efailed=無法設置 $1的屬性： $2 - eattr_A=不更新訪問時間 eattr_a=只能追加到文件 eattr_c=壓縮磁盤上的數據 @@ -198,7 +177,6 @@ eattr_i=不允許修改 eattr_s=刪除時零塊 eattr_S=寫入後始終同步 eattr_u=保存內容以取消刪除 - mount_eaccess=您不允許掛載文件系統 mount_efstab=該掛載點不存在文件系統 mount_epoint=$1不是掛載點 @@ -208,22 +186,18 @@ mount_err1=無法安裝 $1 : $2 mount_err2=無法卸載 $1 : $2 mount_title1=掛載文件系統 mount_title2=卸載文件系統 - zip_err=無法提取文件： $1 zip_ecmd=缺少 $1命令 zip_eunzip=解壓縮失敗： $1 zip_ename=似乎不是zip，tar或tar.gz文件 zip_euntar=取消壓縮失敗： $1 zip_euntar2=解壓縮和解壓縮失敗： $1 - ddir_title=下載目錄 ddir_rusure=要將 $1的內容下載為存檔文件，請單擊下面的存檔類型按鈕之一。 ddir_zip=壓縮 ddir_tgz=塔茲 ddir_tar=柏油 - ebutton=此功能不可用 - preview_etype=無法計算 $1的文件類型 preview_etype2=$1不是受支持的圖像格式 preview_ecmd=未安裝縮放此圖像所需的命令 $1 @@ -231,17 +205,14 @@ preview_eimage=僅圖像可以預覽 preview_title=$1的預覽 preview_bad=無法加載圖片進行預覽 preview_egd=無法使用GD加載圖像 - html_efailed=無法打開HTML編輯器： $1 html_title=編輯HTML檔案 html_title2=創建HTML文件 html_save=保存並關閉 html_err=無法保存HTML文件 - history_title=路徑記錄 history_ok=去 history_button=歷史 - extract_etype=只能提取文件 extract_title=提取壓縮文件 extract_rusure=您確定要提取壓縮文件： diff --git a/firewall/lang/af.auto b/firewall/lang/af.auto index eb744c3d1..6bf6c43b1 100644 --- a/firewall/lang/af.auto +++ b/firewall/lang/af.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 is vervat in IP-stel $1 desc_src=bron desc_dest=bestemming -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Geen iptables (6) opstartaksie is gevind nie, wat aandui dat die IPtables-pakket nie op u stelsel geïnstalleer is nie redhat_eoutput=Kon nie IPtables status kry van die opdrag $1 nie. Dit dui waarskynlik daarop dat u stelsel opgestel is om IP-kettings te gebruik in plaas van IP-tabelle. gentoo_escript=Die Gentoo IPtables-opstartskrif $1 is nie op u stelsel gevind nie. diff --git a/firewall/lang/ar.auto b/firewall/lang/ar.auto index 75f21785b..fda91eafc 100644 --- a/firewall/lang/ar.auto +++ b/firewall/lang/ar.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 موجود في مجموعة IP$1 desc_src=مصدر desc_dest=المكان المقصود -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=لم يتم العثور على iptables (6) إجراء تمهيد ، مما يشير إلى أن حزمة IPtables غير مثبتة على نظامك redhat_eoutput=حدث خطأ أثناء الحصول على حالة IPtables من الأمر$1. يشير هذا على الأرجح إلى أن نظامك قد تم تكوينه لاستخدام IPchains بدلاً من IPtables. gentoo_escript=لم يتم العثور على البرنامج النصي لبدء التشغيل Gentoo IPtables $1 على نظامك. diff --git a/firewall/lang/be.auto b/firewall/lang/be.auto index d84179465..f6435970c 100644 --- a/firewall/lang/be.auto +++ b/firewall/lang/be.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 утрымліваецца ў IP-наборы $1 desc_src=крыніца desc_dest=пункт прызначэння -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Не было знойдзена ніякага дзеяння загрузкі iptables (6), што паказвае на тое, што пакет IPtables не ўсталяваны ў вашай сістэме redhat_eoutput=Памылка атрымання статусу IPtables з каманды $1. Гэта, верагодна, паказвае на тое, што ў вашай сістэме была наладжана выкарыстанне IP-ланцугоў замест IPtables. gentoo_escript=Скрыпт запуску Gentoo IPtables $1 у вашай сістэме не знойдзены. diff --git a/firewall/lang/bg b/firewall/lang/bg index 17e75fcd3..789db2d6f 100644 --- a/firewall/lang/bg +++ b/firewall/lang/bg @@ -150,6 +150,7 @@ desc_args--match-set=$2 се съдържа в IP-набора $1 desc_src=изпращач desc_dest=цел +redhat_einstalled=Не бе открито действие при стартиране за iptables(6), което говори, че пакетът IPtables не е инсталиран на вашата система redhat_eoutput=При определянето на IPtables статус чрез командата $1 беше върната грешка. Това вероятно указва, че системата ви е конфигурирана да използва IPchains вместо IPtables. gentoo_escript=Стартиращият IPtables скрипт на Gentoo не беше открит в системата ви. diff --git a/firewall/lang/bg.auto b/firewall/lang/bg.auto index 6dcaf8165..6126a3804 100644 --- a/firewall/lang/bg.auto +++ b/firewall/lang/bg.auto @@ -6,8 +6,6 @@ desc_match-set!=$2 не съответства на IPset $1 desc_match-set_src=входящ трафик desc_match-set_dst=изходящ трафик -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system - edit_matchset=Съвпадение на IPset edit_matchsetsrc=върху входящия трафик edit_matchsetdst=на изходящ трафик diff --git a/firewall/lang/ca b/firewall/lang/ca index 33974faec..058d58c17 100644 --- a/firewall/lang/ca +++ b/firewall/lang/ca @@ -150,6 +150,7 @@ desc_args--match-set=$2 està contingut al conjunt IP $1 desc_src=origen desc_dest=destinació +redhat_einstalled=No s'ha trobat cap acció d'engegada iptables(6) que indiqui que el paquet IPtables no està instal·lat al sistema redhat_eoutput=S'ha produït un error en buscar l'estat d'IPtables amb l'ordre $1. Això probablement indica que el sistema està configurat per utilitzar IPchains en lloc d'IPtables. gentoo_escript=No s'ha trobat al sistema el script $1 d'inici d'IPtables Gentoo. diff --git a/firewall/lang/ca.auto b/firewall/lang/ca.auto index a4aca1ce7..a4d73cba7 100644 --- a/firewall/lang/ca.auto +++ b/firewall/lang/ca.auto @@ -6,8 +6,6 @@ desc_match-set!=$2 no coincideix amb l'IPset $1 desc_match-set_src=trànsit entrant desc_match-set_dst=trànsit de sortida -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system - edit_matchset=IPset coincident edit_matchsetsrc=sobre el trànsit entrant edit_matchsetdst=al trànsit de sortida diff --git a/firewall/lang/cs.auto b/firewall/lang/cs.auto index c85982562..442b24cee 100644 --- a/firewall/lang/cs.auto +++ b/firewall/lang/cs.auto @@ -38,7 +38,7 @@ desc_args--match-set=$2 je obsaženo v sadě IP $1 desc_src=zdroj desc_dest=destinace -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Nebyla nalezena žádná spouštěcí akce iptables (6), což naznačuje, že balíček IPtables není na vašem systému nainstalován. edit_state_untracked=Nesledováno edit_state_snat=Zdroj NATd diff --git a/firewall/lang/da.auto b/firewall/lang/da.auto index 36d72c5fd..9c5513de7 100644 --- a/firewall/lang/da.auto +++ b/firewall/lang/da.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 er indeholdt i IP-sæt $1 desc_src=kilde desc_dest=bestemmelsessted -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Ingen iptables (6) startup-handling blev fundet, hvilket indikerer, at IPtables-pakken ikke er installeret på dit system redhat_eoutput=Der opstod en fejl ved at få IPtables-status fra kommandoen $1. Dette indikerer sandsynligvis, at dit system er konfigureret til at bruge IPchains i stedet for IPtables. gentoo_escript=Gentoo IPtables opstart script $1 blev ikke fundet på dit system. diff --git a/firewall/lang/de b/firewall/lang/de index e376da5b3..41fde0733 100644 --- a/firewall/lang/de +++ b/firewall/lang/de @@ -17,6 +17,7 @@ index_chain=Chain $1 index_action=Aktion index_desc=Bedingung index_comm=Kommentar +index_no_comment= index_move=Verschieben index_none=Es sind keine Regeln für diese Chain definiert. index_policy=Standardaktion festlegen auf: @@ -381,4 +382,4 @@ rename_ok=Jetzt umbenennen rename_header=Umbenennungsoptionen für Chain rename_adjust=Andere Regeln anpassen, die auf diese Chain verweisen? rename_none=Keine -rename_ecannot=Sie dürfen keine Chains umbenennen +rename_ecannot=Sie dürfen keine Chains umbenennen \ No newline at end of file diff --git a/firewall/lang/de.auto b/firewall/lang/de.auto deleted file mode 100644 index 5865d8184..000000000 --- a/firewall/lang/de.auto +++ /dev/null @@ -1 +0,0 @@ -index_no_comment= diff --git a/firewall/lang/el.auto b/firewall/lang/el.auto index a2ebd4277..9327eeb3b 100644 --- a/firewall/lang/el.auto +++ b/firewall/lang/el.auto @@ -156,7 +156,7 @@ desc_args--match-set=Το $2 περιέχεται στο σύνολο IP $1 desc_src=πηγή desc_dest=προορισμός -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Δεν βρέθηκε iptables (6) εντολή εκκίνησης, υποδεικνύοντας ότι το πακέτο IPtables δεν είναι εγκατεστημένο στο σύστημά σας redhat_eoutput=Παρουσιάστηκε σφάλμα κατά την λήψη της κατάστασης του IPtables από την εντολή $1. Αυτό πιθανώς δείχνει ότι το σύστημά σας έχει ρυθμιστεί ώστε να χρησιμοποιεί IPchains αντί για IPtables. gentoo_escript=Το σενάριο εκκίνησης του Gentoo IPtables $1 δεν βρέθηκε στο σύστημά σας. diff --git a/firewall/lang/es.auto b/firewall/lang/es.auto index 03e7d65fb..c5676dade 100644 --- a/firewall/lang/es.auto +++ b/firewall/lang/es.auto @@ -55,7 +55,7 @@ desc_args--match-set=$2 está contenido en el conjunto de IP $1 desc_src=fuente desc_dest=destino -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=No se encontró ninguna acción de arranque iptables (6), lo que indica que el paquete IPtables no está instalado en su sistema edit_cmt=Comentario de regla edit_state_untracked=Sin seguimiento diff --git a/firewall/lang/eu.auto b/firewall/lang/eu.auto index b6bb4f53c..a0147b4a3 100644 --- a/firewall/lang/eu.auto +++ b/firewall/lang/eu.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 IP-multzoan dago $1 desc_src=iturria desc_dest=helmuga -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Ez da iptables (6) abiarazteko ekintza aurkitu, eta horrek adierazten du IPtables paketea ez dagoela zure sisteman instalatuta. redhat_eoutput=Errore bat gertatu da IPtables egoera $1 komandoan lortzean. Horrek ziur asko adierazten du zure sistema IPchains ordez IPchains erabiltzeko konfiguratu dela. gentoo_escript=Gentoo IPtables hasierako script $1 ez da zure sisteman aurkitu. diff --git a/firewall/lang/fa.auto b/firewall/lang/fa.auto index 41868baad..2e8d2ec16 100644 --- a/firewall/lang/fa.auto +++ b/firewall/lang/fa.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 در مجموعه IP $1 موجود است desc_src=منبع desc_dest=مقصد -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=هیچ عملیاتی برای راه انداز iptables (6) یافت نشد ، نشان می دهد که بسته IPtables در سیستم شما نصب نشده است redhat_eoutput=خطایی در دریافت وضعیت IPtables از دستور$1 رخ داد. احتمالاً این نشان می دهد كه سیستم شما پیكربندی شده است تا از IPchains به جای IPtables استفاده كند. gentoo_escript=اسکریپت راه اندازی Gentoo IPtables $1 در سیستم شما یافت نشد. diff --git a/firewall/lang/fi.auto b/firewall/lang/fi.auto index 512e97970..bd361802c 100644 --- a/firewall/lang/fi.auto +++ b/firewall/lang/fi.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 sisältyy IP-joukkoon $1 desc_src=lähde desc_dest=määränpää -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=iptables (6) -käynnistystoimintoa ei löytynyt, mikä osoittaa, että IPtable-pakettia ei ole asennettu järjestelmään redhat_eoutput=IPtable-tilan saamisessa komennosta $1 tapahtui virhe. Tämä luultavasti osoittaa, että järjestelmäsi on määritetty käyttämään IP-ketjuja IPtaulujen sijasta. gentoo_escript=Gentoo IPtables -aloitusohjelmaa $1 ei löydy järjestelmästäsi. diff --git a/firewall/lang/fr b/firewall/lang/fr index 5bedd812c..56104cd25 100644 --- a/firewall/lang/fr +++ b/firewall/lang/fr @@ -148,6 +148,7 @@ desc_args--match-set=$2 est contenu dans l'ensemble IP $1 desc_src=la source desc_dest=destination +redhat_einstalled=Aucune action de démarrage iptables (6) n'a été trouvée, indiquant que le package IPtables n'est pas installé sur votre système redhat_eoutput=Une erreur est survenue en tentant d'obtenir le status d'IPtables à l'aide de la commande $1. Ceci indique probablement que votre système a été configuré pour utiliser IPchains au lieu de IPtables. gentoo_escript=Le script de démarrage $1 de Gentoo n'a pas été trouvé sur votre système. diff --git a/firewall/lang/fr.auto b/firewall/lang/fr.auto index a09a8644d..799c67ea7 100644 --- a/firewall/lang/fr.auto +++ b/firewall/lang/fr.auto @@ -8,8 +8,6 @@ desc_match-set!=$2 ne correspond pas à l'ensemble IP $1 desc_match-set_src=trafic entrant desc_match-set_dst=trafic sortant -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system - edit_matchset=Ensemble d'adresses IP correspondant edit_matchsetsrc=sur le trafic entrant edit_matchsetdst=sur le trafic sortant diff --git a/firewall/lang/he.auto b/firewall/lang/he.auto index 61f678197..b1beac331 100644 --- a/firewall/lang/he.auto +++ b/firewall/lang/he.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 כלול בערכת ה- IP $1 desc_src=מקור desc_dest=יעד -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=לא נמצאו פעולות iptables (6) אתחול, מה שמצביע על כך שחבילת ה- IPtables אינה מותקנת במערכת שלך redhat_eoutput=אירעה שגיאה בהשגת סטטוס ה- IPtables מהפקודה $1. זה כנראה מצביע על כך שהמערכת שלך הוגדרה לשימוש ברשתות IP במקום בטבלאות IP. gentoo_escript=סקריפט ההפעלה של Gentoo IPtables $1 לא נמצא במערכת שלך. diff --git a/firewall/lang/hr.auto b/firewall/lang/hr.auto index c5eff209b..b6db64a6c 100644 --- a/firewall/lang/hr.auto +++ b/firewall/lang/hr.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 je sadržan u IP skupu $1 desc_src=izvor desc_dest=odredište -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Nije pronađena nijedna radnja pokretanja iptables (6), što ukazuje da paket IPtables nije instaliran na vašem sustavu redhat_eoutput=Došlo je do pogreške pri dobivanju statusa IPtables iz naredbe $1. To vjerojatno ukazuje da je vaš sustav konfiguriran za upotrebu IPchaina umjesto IPtablesa. gentoo_escript=Skripta pokretanja Gentoo IPtables $1 nije pronađena u vašem sustavu. diff --git a/firewall/lang/hu.auto b/firewall/lang/hu.auto index fae08450b..39f7b57b9 100644 --- a/firewall/lang/hu.auto +++ b/firewall/lang/hu.auto @@ -32,7 +32,7 @@ desc_args--match-set=A $2 a $1 IP-készletben található desc_src=forrás desc_dest=cél -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Nem található iptables (6) indítási művelet, amely azt jelzi, hogy az IPtable csomag nincs telepítve a rendszerére edit_state_snat=Forrás NATd edit_state_dnat=NATd rendeltetési hely diff --git a/firewall/lang/it.auto b/firewall/lang/it.auto index 0f50b7f8a..497902b4f 100644 --- a/firewall/lang/it.auto +++ b/firewall/lang/it.auto @@ -55,7 +55,7 @@ desc_args--match-set=$2 è contenuto nel set IP $1 desc_src=fonte desc_dest=destinazione -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Non è stata trovata alcuna azione di avvio iptables (6), a indicare che il pacchetto IPtables non è installato sul sistema edit_state_untracked=Non tracciato edit_state_snat=Fonte NATd diff --git a/firewall/lang/ja.auto b/firewall/lang/ja.auto index d7ad068d2..214902fb0 100644 --- a/firewall/lang/ja.auto +++ b/firewall/lang/ja.auto @@ -48,7 +48,7 @@ desc_args--match-set=$2はIPセット $1に含まれています desc_src=ソース desc_dest=先 -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=IPテーブルパッケージがシステムにインストールされていないことを示すiptables（6）ブートアップアクションが見つかりませんでした edit_state_untracked=追跡されない edit_state_snat=ソースNATd diff --git a/firewall/lang/ko.auto b/firewall/lang/ko.auto index d67fef228..bda6c0a9b 100644 --- a/firewall/lang/ko.auto +++ b/firewall/lang/ko.auto @@ -156,7 +156,7 @@ desc_args--match-set=IP 세트 $1 에 $2 이 (가) 포함되어 있습니다 desc_src=출처 desc_dest=목적지 -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=IPtables 패키지가 시스템에 설치되지 않았 음을 나타내는 iptables (6) 부팅 작업이 없습니다. redhat_eoutput=명령 $1 에서 IPtables 상태를 가져 오는 중 오류가 발생했습니다. 이는 시스템이 IPtable 대신 IPchain을 사용하도록 구성되었음을 나타냅니다. gentoo_escript=시스템에서 젠투 IPtables 시작 스크립트 $1 을 (를) 찾을 수 없습니다. diff --git a/firewall/lang/lt.auto b/firewall/lang/lt.auto index a4573dfbc..7b9513144 100644 --- a/firewall/lang/lt.auto +++ b/firewall/lang/lt.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 yra IP rinkinyje $1 desc_src=šaltinis desc_dest=Kelionės tikslas -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Nebuvo rastas iptables (6) įkrovos veiksmas, rodantis, kad IPtable paketas neįdiegtas jūsų sistemoje redhat_eoutput=Gaunant „IPtable“ būseną iš komandos $1 įvyko klaida. Tai tikriausiai rodo, kad jūsų sistema sukonfigūruota naudoti IPchains, o ne IPtable. gentoo_escript=„Gentoo IPtables“ paleisties scenarijus $1 jūsų sistemoje nerastas. diff --git a/firewall/lang/lv.auto b/firewall/lang/lv.auto index b7290e7c6..1e5baadee 100644 --- a/firewall/lang/lv.auto +++ b/firewall/lang/lv.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 ir ietverts IP komplektā $1 desc_src=avots desc_dest=galapunkts -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Netika atrasta iptables (6) sāknēšanas darbība, norādot, ka jūsu sistēmā nav instalēta pakete IPtables. redhat_eoutput=Kļūda, iegūstot IPtable statusu no komandas $1, radās. Tas, iespējams, norāda, ka jūsu sistēma ir konfigurēta tā, lai IPtable vietā izmantotu IPchains. gentoo_escript=Gentoo IPtables starta skripts $1 jūsu sistēmā netika atrasts. diff --git a/firewall/lang/ms.auto b/firewall/lang/ms.auto index 687e3dcd7..0fbe39f75 100644 --- a/firewall/lang/ms.auto +++ b/firewall/lang/ms.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 terkandung dalam IP-set $1 desc_src=sumber desc_dest=destinasi -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Tiada iptables (6) tindakan bootup dijumpai, menunjukkan bahawa pakej IPtables tidak dipasang pada sistem anda redhat_eoutput=Ralat berlaku untuk mendapatkan status IPtables dari perintah $1. Ini mungkin menunjukkan bahawa sistem anda telah dikonfigurasikan untuk menggunakan IPchains dan bukannya IPTables. gentoo_escript=Skrip permulaan Gentoo IPtables $1 tidak dijumpai pada sistem anda. diff --git a/firewall/lang/mt.auto b/firewall/lang/mt.auto index edfa99609..a9049970c 100644 --- a/firewall/lang/mt.auto +++ b/firewall/lang/mt.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 jinsab fis-sett tal-IP $1 desc_src=sors desc_dest=destinazzjoni -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=L-ebda iptables (6) azzjoni ta 'boot ma nstabet, li tindika li l-pakkett IPtables mhuwiex installat fis-sistema tiegħek redhat_eoutput=Sar żball li ġab status ta 'IPtables mill-kmand $1. Dan probabbilment jindika li s-sistema tiegħek ġiet ikkonfigurata biex tuża IPchains minflok IPtables. gentoo_escript=L-iskritt tal-istartjar Gentoo IPtables $1 ma nstabx fis-sistema tiegħek. diff --git a/firewall/lang/nl.auto b/firewall/lang/nl.auto index c315343ef..e4b0df6dc 100644 --- a/firewall/lang/nl.auto +++ b/firewall/lang/nl.auto @@ -32,7 +32,7 @@ desc_args--match-set=$2 zit in IP-set $1 desc_src=bron desc_dest=bestemming -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Er is geen opstartactie iptables (6) gevonden, wat aangeeft dat het IPtables-pakket niet op uw systeem is geïnstalleerd edit_state_snat=Bron NATd edit_state_dnat=Bestemming NATd diff --git a/firewall/lang/no b/firewall/lang/no index 974f11553..5c01c5516 100644 --- a/firewall/lang/no +++ b/firewall/lang/no @@ -150,6 +150,7 @@ desc_args--match-set=$2 finnes i IP-sett $1 desc_src=kilde desc_dest=mål +redhat_einstalled=Ingen oppstartshandling for iptables(6) ble funnet, noe som antyder at IPtables pakken ikke er installert på systemet ditt redhat_eoutput=An error occured getting IPtables status from the command $1. This probably indicates that your system has been configured to use IPchains instead of IPtables. gentoo_escript=The Gentoo IPtables startup script $1 was not found on your system. diff --git a/firewall/lang/no.auto b/firewall/lang/no.auto index c4c1d9208..2477f9a56 100644 --- a/firewall/lang/no.auto +++ b/firewall/lang/no.auto @@ -6,8 +6,6 @@ desc_match-set!=$2 samsvarer ikke med IPset $1 desc_match-set_src=innkommende trafikk desc_match-set_dst=utgående trafikk -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system - edit_matchset=Matchende IPset edit_matchsetsrc=på innkommende trafikk edit_matchsetdst=på utgående trafikk diff --git a/firewall/lang/pl b/firewall/lang/pl index 6f7696823..6a705b97d 100644 --- a/firewall/lang/pl +++ b/firewall/lang/pl @@ -127,6 +127,7 @@ desc_conds=Jeżeli $1 desc_and=i desc_always=Zawsze +redhat_einstalled=Akcja startowa iptables(6) nie została znaleziona, prawdopodobnie pakiet IPtables nie jest zainstalowany redhat_eoutput=Wystąpił błąd podczas pobierania stanu IPtables poleceniem $1. Prawdopodobnie twój system jest skonfigurowany do używania IPchains zamiast IPtables. gentoo_escript=Skrypt uruchamiający IPtables dla Gentoo $1 nie został znaleziony w systemie diff --git a/firewall/lang/pl.auto b/firewall/lang/pl.auto index 55b12d564..c26eb2a5d 100644 --- a/firewall/lang/pl.auto +++ b/firewall/lang/pl.auto @@ -29,8 +29,6 @@ desc_args--match-set=$2 jest zawarty w zestawie IP $1 desc_src=źródło desc_dest=Miejsce docelowe -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system - edit_state_snat=Źródło NATd edit_state_dnat=Miejsce docelowe NATd edit_matchset=Pasujące IPset diff --git a/firewall/lang/pt.auto b/firewall/lang/pt.auto index d28f4e8e0..e7851b973 100644 --- a/firewall/lang/pt.auto +++ b/firewall/lang/pt.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 está contido no conjunto de IP $1 desc_src=fonte desc_dest=destino -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Nenhuma ação de inicialização iptables (6) foi encontrada, indicando que o pacote IPtables não está instalado no seu sistema redhat_eoutput=Ocorreu um erro ao obter o status de tabelas de IP do comando $1. Provavelmente, isso indica que seu sistema foi configurado para usar IPchains em vez de IPtables. gentoo_escript=O script de inicialização do Gentoo IPtables $1 não foi encontrado no seu sistema. diff --git a/firewall/lang/pt_BR.auto b/firewall/lang/pt_BR.auto index 7606e61d0..2d232faef 100644 --- a/firewall/lang/pt_BR.auto +++ b/firewall/lang/pt_BR.auto @@ -38,7 +38,7 @@ desc_args--match-set=$2 está contido no conjunto de IP $1 desc_src=fonte desc_dest=destino -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Nenhuma ação de inicialização iptables (6) foi encontrada, indicando que o pacote IPtables não está instalado no seu sistema edit_state_snat=NATd de origem edit_state_dnat=NATd de destino diff --git a/firewall/lang/ro.auto b/firewall/lang/ro.auto index 21cf6a953..f7e172232 100644 --- a/firewall/lang/ro.auto +++ b/firewall/lang/ro.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 este conținut în setul IP $1 desc_src=sursă desc_dest=destinaţie -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Nu a fost găsită nicio iptables (6) acțiune de pornire, care indică faptul că pachetul IPtables nu este instalat pe sistemul dvs. redhat_eoutput=A apărut o eroare la obținerea stării IPtables de la comanda $1. Acest lucru indică probabil că sistemul dvs. a fost configurat pentru a utiliza IPchains în loc de tabele IP. gentoo_escript=Scriptul de pornire Gentoo IPtables $1 nu a fost găsit în sistemul dvs. diff --git a/firewall/lang/ru.auto b/firewall/lang/ru.auto index 292d36fe2..3ae096ece 100644 --- a/firewall/lang/ru.auto +++ b/firewall/lang/ru.auto @@ -36,7 +36,7 @@ desc_args--match-set=$2 содержится в наборе IP $1 desc_src=источник desc_dest=место назначения -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Не найдено ни одного загрузочного действия iptables (6), указывающего на то, что в вашей системе не установлен пакет IPtables edit_state_snat=Исходный NATd edit_state_dnat=NATd назначения diff --git a/firewall/lang/sk.auto b/firewall/lang/sk.auto index 104b9fcf3..194854444 100644 --- a/firewall/lang/sk.auto +++ b/firewall/lang/sk.auto @@ -38,7 +38,7 @@ desc_args--match-set=$2 je obsiahnutý v IP-súbore $1 desc_src=zdroj desc_dest=destinácia -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Nebola nájdená žiadna bootovacia akcia iptables (6), čo naznačuje, že balík IPtables nie je nainštalovaný vo vašom systéme edit_state_snat=Zdroj NATd edit_state_dnat=Cieľový NATd diff --git a/firewall/lang/sl.auto b/firewall/lang/sl.auto index a547cfa11..69967ec34 100644 --- a/firewall/lang/sl.auto +++ b/firewall/lang/sl.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 je vsebovan v IP-nizu $1 desc_src=vir desc_dest=cilj -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Ni najdeno zagonskega dejanja iptables (6), kar pomeni, da paket IPtables ni nameščen v vašem sistemu redhat_eoutput=Pri pridobivanju statusa IPtables iz ukaza $1 se je pojavila napaka. To verjetno kaže, da je bil vaš sistem konfiguriran tako, da uporablja IPchains namesto IPtables. gentoo_escript=Začetnega skripta Gentoo IPtables $1 v vašem sistemu ni bilo mogoče najti. diff --git a/firewall/lang/sv.auto b/firewall/lang/sv.auto index 0f29e9365..b48d59ee3 100644 --- a/firewall/lang/sv.auto +++ b/firewall/lang/sv.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 finns i IP-set $1 desc_src=källa desc_dest=destination -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Inga iptables (6) uppstartsåtgärd hittades, vilket indikerar att IPtables-paketet inte är installerat på ditt system redhat_eoutput=Ett fel inträffade med att få IPtables-status från kommandot $1. Detta indikerar antagligen att ditt system har konfigurerats för att använda IP-kedjor istället för IP-tabeller. gentoo_escript=Gentoo IPtables-startskriptet $1 hittades inte på ditt system. diff --git a/firewall/lang/th.auto b/firewall/lang/th.auto index a4f2bacdf..16e3415cf 100644 --- a/firewall/lang/th.auto +++ b/firewall/lang/th.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 มีอยู่ในชุด IP $1 desc_src=แหล่ง desc_dest=ปลายทาง -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=ไม่พบการกระทำการบูท iptables (6) ซึ่งบ่งชี้ว่าแพ็คเกจ IPtables ไม่ได้ติดตั้งในระบบของคุณ redhat_eoutput=เกิดข้อผิดพลาดในการรับสถานะ IPtables จากคำสั่ง $1 นี่อาจเป็นการระบุว่าระบบของคุณได้รับการกำหนดค่าให้ใช้ IPchains แทน IPtables gentoo_escript=ไม่พบสคริปต์เริ่มต้นของ Gentoo IPtables ในระบบของคุณ diff --git a/firewall/lang/tr.auto b/firewall/lang/tr.auto index 8d352be42..1762f0f7f 100644 --- a/firewall/lang/tr.auto +++ b/firewall/lang/tr.auto @@ -40,7 +40,7 @@ desc_args--match-set=$2, IP kümesinde $1 içeriyor desc_src=kaynak desc_dest=hedef -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=IPtables paketinin sisteminizde yüklü olmadığını belirten iptables (6) önyükleme eylemi bulunamadı edit_state_untracked=İzlenmedi edit_state_snat=Kaynak NATd diff --git a/firewall/lang/uk.auto b/firewall/lang/uk.auto index e52388ef8..175ce2777 100644 --- a/firewall/lang/uk.auto +++ b/firewall/lang/uk.auto @@ -57,7 +57,7 @@ desc_args--match-set=$2 міститься в IP-наборі $1 desc_src=джерело desc_dest=пункт призначення -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Не знайдено iptables (6) завантажувальної дії, що вказує на те, що пакет IPtables не встановлений у вашій системі edit_state_untracked=Не відслідковується edit_state_snat=Джерело NATd diff --git a/firewall/lang/ur.auto b/firewall/lang/ur.auto index e9797db04..fa5e1417a 100644 --- a/firewall/lang/ur.auto +++ b/firewall/lang/ur.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 آئی پی سیٹ$1 پر مشتمل ہے desc_src=ذریعہ desc_dest=منزل -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=No iptables(6) bootup action was found, indicating that the IPtables package is not installed on your system redhat_eoutput=کمانڈ$1 سے IPtables کا درجہ حاصل کرنے میں ایک خرابی پیش آگئی۔ یہ شاید اس بات کی نشاندہی کرتا ہے کہ آپ کے سسٹم کو IPtables کے بجائے IPchains استعمال کرنے کے لئے تشکیل دیا گیا ہے۔ gentoo_escript=آپ کے سسٹم پر جنٹو IPtables اسٹارٹ اسکرپٹ$1 نہیں ملا۔ diff --git a/firewall/lang/vi.auto b/firewall/lang/vi.auto index 29f022141..cac68bacc 100644 --- a/firewall/lang/vi.auto +++ b/firewall/lang/vi.auto @@ -156,7 +156,7 @@ desc_args--match-set=$2 được chứa trong IP-set $1 desc_src=nguồn desc_dest=Nơi Đến -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=Không tìm thấy hành động khởi động iptables (6), chỉ ra rằng gói IPtables không được cài đặt trên hệ thống của bạn redhat_eoutput=Đã xảy ra lỗi khi nhận trạng thái IPtables từ lệnh $1. Điều này có thể chỉ ra rằng hệ thống của bạn đã được cấu hình để sử dụng IPchains thay vì IPtables. gentoo_escript=Không tìm thấy tập lệnh khởi động Gentoo IPtables $1 trên hệ thống của bạn. diff --git a/firewall/lang/zh.auto b/firewall/lang/zh.auto index 9e56f99e5..8c97b6e0a 100644 --- a/firewall/lang/zh.auto +++ b/firewall/lang/zh.auto @@ -156,7 +156,7 @@ desc_args--match-set=IP设置 $1中包含 $2 desc_src=资源 desc_dest=目的地 -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=找不到iptables（6）引导操作，表明您的系统上未安装IPtables软件包 redhat_eoutput=从命令 $1获取IPtables状态时发生错误。这可能表明您的系统已配置为使用IP链而不是IPtable。 gentoo_escript=在您的系统上找不到Gentoo IPtables启动脚本 $1。 diff --git a/firewall/lang/zh_TW.auto b/firewall/lang/zh_TW.auto index 84ad3c56c..130da3d5a 100644 --- a/firewall/lang/zh_TW.auto +++ b/firewall/lang/zh_TW.auto @@ -156,7 +156,7 @@ desc_args--match-set=IP設置 $1中包含 $2 desc_src=資源 desc_dest=目的地 -redhat_einstalled2=No $1 bootup action was found, indicating that the IPtables package is not installed on your system +redhat_einstalled=找不到iptables（6）引導操作，表明您的系統上未安裝IPtables軟件包 redhat_eoutput=從命令 $1獲取IPtables狀態時發生錯誤。這可能表明您的系統已配置為使用IP鏈而不是IPtable。 gentoo_escript=在您的系統上找不到Gentoo IPtables啟動腳本 $1。 diff --git a/firewalld/lang/af.auto b/firewalld/lang/af.auto index beead0876..f9b4df9d0 100644 --- a/firewalld/lang/af.auto +++ b/firewalld/lang/af.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Herlaai die FirewallD-bediener en pas die reëls toe index_listrules_restartdesc=Lys besonderhede oor bestaande ryk en direkte FirewallD-reëls in $1-sone. index_dependent=Kon nie $1 afhanklike diens herbegin nie index_manual=Wysig konfigurasielêers. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Wysig konfigurasielêers manual_editsel=Wysig FirewallD-konfigurasielêer diff --git a/firewalld/lang/ar.auto b/firewalld/lang/ar.auto index 96f776239..33610e669 100644 --- a/firewalld/lang/ar.auto +++ b/firewalld/lang/ar.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=أعد تحميل خادم FirewallD وقم بتطب index_listrules_restartdesc=سرد تفاصيل حول قواعد جدار الحماية الغنية والمباشرة الموجودة في منطقة$1. index_dependent=فشل في إعادة تشغيل الخدمة التابعة$1 index_manual=تحرير ملفات التكوين. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=تحرير ملفات التكوين manual_editsel=تحرير ملف تكوين جدار الحماية diff --git a/firewalld/lang/be.auto b/firewalld/lang/be.auto index fbe7016c3..3b85fd69d 100644 --- a/firewalld/lang/be.auto +++ b/firewalld/lang/be.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Перазагрузіце сервер FirewallD і index_listrules_restartdesc=Пералічыце падрабязную інфармацыю аб існуючых багатых і прамых правілах FirewallD у зоне $1. index_dependent=Не атрымалася перазапусціць залежную службу $1 index_manual=Рэдагаваць канфігурацыйныя файлы. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Рэдагаваць канфігурацыйныя файлы manual_editsel=Рэдагаваць файл канфігурацыі FirewallD diff --git a/firewalld/lang/bg.auto b/firewalld/lang/bg.auto index 36a4da31c..de1e81b3f 100644 --- a/firewalld/lang/bg.auto +++ b/firewalld/lang/bg.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Презаредете сървъра на FirewallD index_listrules_restartdesc=Избройте подробности за съществуващите богати и директни правила на FirewallD в зона $1. index_dependent=Неуспешно рестартиране на $1 зависима услуга index_manual=Редактиране на конфигурационни файлове. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Редактиране на конфигурационни файлове manual_editsel=Редактирайте конфигурационния файл на FirewallD diff --git a/firewalld/lang/ca.auto b/firewalld/lang/ca.auto index 71c439d4d..9c500edcd 100644 --- a/firewalld/lang/ca.auto +++ b/firewalld/lang/ca.auto @@ -15,7 +15,6 @@ index_restart_firewallddesc=Torneu a carregar el servidor FirewallD i apliqueu l index_listrules_restartdesc=Llista els detalls sobre les regles de FirewallD riques i directes existents a la zona $1. index_dependent=No s'ha pogut reiniciar el servei dependent de $1 index_manual=Edita els fitxers de configuració. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Edita els fitxers de configuració manual_editsel=Editeu el fitxer de configuració de FirewallD diff --git a/firewalld/lang/cs.auto b/firewalld/lang/cs.auto index 0c7515877..b4953541f 100644 --- a/firewalld/lang/cs.auto +++ b/firewalld/lang/cs.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Znovu načtěte server FirewallD a použijte pravidl index_listrules_restartdesc=Vypsat podrobnosti o existujících rozšířených a přímých pravidlech FirewallD v zóně $1. index_dependent=Restartování závislé služby $1 se nezdařilo index_manual=Upravit konfigurační soubory. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Upravit konfigurační soubory manual_editsel=Upravte konfigurační soubor FirewallD diff --git a/firewalld/lang/da.auto b/firewalld/lang/da.auto index 7d9ccbbb8..fadf88a39 100644 --- a/firewalld/lang/da.auto +++ b/firewalld/lang/da.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Genindlæs FirewallD-serveren, og anvend de regler, index_listrules_restartdesc=Vis detaljer om eksisterende righoldige og direkte FirewallD-regler i $1 zone. index_dependent=Kunne ikke genstarte $1 afhængig tjeneste index_manual=Rediger konfigurationsfiler. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Rediger konfigurationsfiler manual_editsel=Rediger FirewallD-konfigurationsfil diff --git a/firewalld/lang/de b/firewalld/lang/de index 9d78bba26..583e51c56 100644 --- a/firewalld/lang/de +++ b/firewalld/lang/de @@ -130,9 +130,9 @@ list_rules_plus_more=+ $1 mehr log_save_rules=Gelöschte $1 Regeln restart_err=Fehler beim Anwenden der Konfiguration - stop_err=Fehler beim Stoppen von FirewallD start_err=Fehler beim Starten von FirewallD + log_stop=FirewallD gestoppt log_start=FirewallD gestartet log_restart=FirewallD-Konfiguration angewendet @@ -153,4 +153,4 @@ log_ip_block=Temporär blockierte IP/CIDR $1 log_ip_permblock=Permanent blockierte IP/CIDR $1 log_create_zone=Zone $1 erstellt log_delete_zone=Zone $1 gelöscht -log_default_zone=Zone $1 zur Standardzone gemacht +log_default_zone=Zone $1 zur Standardzone gemacht \ No newline at end of file diff --git a/firewalld/lang/el.auto b/firewalld/lang/el.auto index dbe6b2d78..64022519e 100644 --- a/firewalld/lang/el.auto +++ b/firewalld/lang/el.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Φορτώστε ξανά τον διακομιστ index_listrules_restartdesc=Παραθέστε λεπτομέρειες σχετικά με τους υπάρχοντες εμπλουτισμένους και άμεσους κανόνες FirewallD στη ζώνη $1. index_dependent=Αποτυχία επανεκκίνησης $1 εξαρτώμενης υπηρεσίας index_manual=Επεξεργασία αρχείων διαμόρφωσης. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Επεξεργασία αρχείων διαμόρφωσης manual_editsel=Επεξεργαστείτε το αρχείο διαμόρφωσης FirewallD diff --git a/firewalld/lang/es.auto b/firewalld/lang/es.auto index 13307cc9f..3c536e858 100644 --- a/firewalld/lang/es.auto +++ b/firewalld/lang/es.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Vuelva a cargar el servidor FirewallD y aplique las index_listrules_restartdesc=Enumere los detalles sobre las reglas FirewallD enriquecidas y directas existentes en la zona $1. index_dependent=No se pudo reiniciar el servicio dependiente de $1 index_manual=Editar archivos de configuración. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Editar archivos de configuración manual_editsel=Editar archivo de configuración de FirewallD diff --git a/firewalld/lang/eu.auto b/firewalld/lang/eu.auto index 40255ca5c..7a9a3bd6f 100644 --- a/firewalld/lang/eu.auto +++ b/firewalld/lang/eu.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Berriz kargatu FirewallD zerbitzaria eta aplikatu be index_listrules_restartdesc=Zerrendatu lehendik dauden FirewallD arau aberats eta zuzenei buruzko xehetasunak $1 zonan. index_dependent=Ezin izan da $1 menpeko zerbitzua berrabiarazi index_manual=Editatu konfigurazio fitxategiak. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Editatu konfigurazio fitxategiak manual_editsel=Editatu FirewallD konfigurazio fitxategia diff --git a/firewalld/lang/fa.auto b/firewalld/lang/fa.auto index 271964566..79bba8239 100644 --- a/firewalld/lang/fa.auto +++ b/firewalld/lang/fa.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=سرور FirewallD را دوباره بارگیری index_listrules_restartdesc=جزئیات مربوط به قوانین فایروالD غنی و مستقیم موجود را در منطقه $1 فهرست کنید. index_dependent=سرویس وابسته $1 راه اندازی مجدد انجام نشد index_manual=ویرایش فایل های پیکربندی -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=ویرایش فایل های پیکربندی manual_editsel=فایل پیکربندی FirewallD را ویرایش کنید diff --git a/firewalld/lang/fi.auto b/firewalld/lang/fi.auto index 159a2c842..93e294662 100644 --- a/firewalld/lang/fi.auto +++ b/firewalld/lang/fi.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Lataa FirewallD-palvelin uudelleen ja käytä pysyv index_listrules_restartdesc=Luettele tiedot olemassa olevista monipuolisista ja suorista FirewallD-säännöistä $1 vyöhykkeellä. index_dependent=$1 riippuvaisen palvelun uudelleenkäynnistys epäonnistui index_manual=Muokkaa asetustiedostoja. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Muokkaa asetustiedostoja manual_editsel=Muokkaa FirewallD-määritystiedostoa diff --git a/firewalld/lang/fr.auto b/firewalld/lang/fr.auto index cf00bf330..2dcdf13be 100644 --- a/firewalld/lang/fr.auto +++ b/firewalld/lang/fr.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Rechargez le serveur FirewallD et appliquez les règ index_listrules_restartdesc=Répertorier les détails des règles FirewallD enrichies et directes existantes dans la zone $1. index_dependent=Impossible de redémarrer le service dépendant $1 index_manual=Modifier les fichiers de configuration. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Modifier les fichiers de configuration manual_editsel=Modifier le fichier de configuration FirewallD diff --git a/firewalld/lang/he.auto b/firewalld/lang/he.auto index 07a9dd6eb..7c470e9b8 100644 --- a/firewalld/lang/he.auto +++ b/firewalld/lang/he.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=טען מחדש את שרת FirewallD והחל את index_listrules_restartdesc=רשום פרטים על כללי FirewallD עשירים וישירים באזור $1. index_dependent=ההפעלה מחדש של השירות התלוי $1 נכשלה index_manual=ערוך קבצי תצורה. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=ערוך קבצי תצורה manual_editsel=ערוך את קובץ התצורה של FirewallD diff --git a/firewalld/lang/hr.auto b/firewalld/lang/hr.auto index 9862a864e..3003ea2aa 100644 --- a/firewalld/lang/hr.auto +++ b/firewalld/lang/hr.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Ponovno učitajte FirewallD poslužitelj i primijeni index_listrules_restartdesc=Navedite pojedinosti o postojećim bogatim i izravnim FirewallD pravilima u zoni $1. index_dependent=Nije uspjelo ponovno pokretanje $1 ovisne usluge index_manual=Uredi konfiguracijske datoteke. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Uredi konfiguracijske datoteke manual_editsel=Uredite konfiguracijsku datoteku FirewallD diff --git a/firewalld/lang/hu.auto b/firewalld/lang/hu.auto index 2bff1c5c5..8937466a5 100644 --- a/firewalld/lang/hu.auto +++ b/firewalld/lang/hu.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Töltse be újra a FirewallD-kiszolgálót, és alka index_listrules_restartdesc=Részletek a(z) $1 zónában meglévő gazdag és közvetlen FirewallD szabályokról. index_dependent=Nem sikerült újraindítani a(z) $1 függő szolgáltatást index_manual=Konfigurációs fájlok szerkesztése. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Konfigurációs fájlok szerkesztése manual_editsel=Szerkessze a FirewallD konfigurációs fájlját diff --git a/firewalld/lang/it.auto b/firewalld/lang/it.auto index 7b5753cb6..053c0f73c 100644 --- a/firewalld/lang/it.auto +++ b/firewalld/lang/it.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Ricaricare il server FirewallD e applicare le regole index_listrules_restartdesc=Elenca i dettagli sulle regole FirewallD avanzate e dirette esistenti nella zona $1. index_dependent=Impossibile riavviare il servizio dipendente $1 index_manual=Modifica file di configurazione. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Modifica file di configurazione manual_editsel=Modifica il file di configurazione di FirewallD diff --git a/firewalld/lang/ja.auto b/firewalld/lang/ja.auto index 6cf0ecd3e..720ae825c 100644 --- a/firewalld/lang/ja.auto +++ b/firewalld/lang/ja.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=FirewallDサーバーをリロードし、永続的 index_listrules_restartdesc=$1ゾーンにある既存のリッチおよびダイレクトFirewallDルールに関する詳細を一覧表示します。 index_dependent=$1 依存サービスの再起動に失敗しました index_manual=設定ファイルを編集します。 -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=設定ファイルの編集 manual_editsel=FirewallD 構成ファイルを編集する diff --git a/firewalld/lang/ko.auto b/firewalld/lang/ko.auto index 22379d1eb..b5bad5fe1 100644 --- a/firewalld/lang/ko.auto +++ b/firewalld/lang/ko.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=FirewallD 서버를 다시 로드하고 영구적으 index_listrules_restartdesc=$1 영역의 기존 풍부하고 직접적인 FirewallD 규칙에 대한 세부 정보를 나열합니다. index_dependent=$1 종속 서비스를 다시 시작하지 못했습니다 index_manual=구성 파일을 편집합니다. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=구성 파일 편집 manual_editsel=FirewallD 구성 파일 수정 diff --git a/firewalld/lang/lt.auto b/firewalld/lang/lt.auto index d4ed1af4d..3c91dddb9 100644 --- a/firewalld/lang/lt.auto +++ b/firewalld/lang/lt.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Iš naujo įkelkite FirewallD serverį ir pritaikyki index_listrules_restartdesc=Išsamią informaciją apie esamas išsamias ir tiesiogines ugniasienės taisykles $1 zonoje. index_dependent=Nepavyko iš naujo paleisti $1 priklausomos paslaugos index_manual=Redaguoti konfigūracijos failus. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Redaguoti konfigūracijos failus manual_editsel=Redaguoti FirewallD konfigūracijos failą diff --git a/firewalld/lang/lv.auto b/firewalld/lang/lv.auto index 76124f1e3..d75676caa 100644 --- a/firewalld/lang/lv.auto +++ b/firewalld/lang/lv.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Atkārtoti ielādējiet FirewallD serveri un lietoji index_listrules_restartdesc=Norādiet detalizētu informāciju par esošajiem bagātinātajiem un tiešajiem FirewallD noteikumiem zonā $1. index_dependent=Neizdevās restartēt $1 atkarīgo pakalpojumu index_manual=Rediģēt konfigurācijas failus. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Rediģēt konfigurācijas failus manual_editsel=Rediģēt FirewallD konfigurācijas failu diff --git a/firewalld/lang/ms.auto b/firewalld/lang/ms.auto index a944ebbd7..32820affb 100644 --- a/firewalld/lang/ms.auto +++ b/firewalld/lang/ms.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Muat semula pelayan FirewallD dan gunakan peraturan index_listrules_restartdesc=Senaraikan butiran tentang peraturan FirewallD yang kaya dan langsung dalam $1 zon. index_dependent=Gagal memulakan semula perkhidmatan bergantung $1 index_manual=Edit Fail Konfigurasi. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Edit Fail Konfigurasi manual_editsel=Edit fail konfigurasi FirewallD diff --git a/firewalld/lang/mt.auto b/firewalld/lang/mt.auto index 76ae04230..5065a6f31 100644 --- a/firewalld/lang/mt.auto +++ b/firewalld/lang/mt.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Reload the FirewallD server u applika r-regoli li n index_listrules_restartdesc=Elenka d-dettalji dwar ir-regoli FirewallD sinjuri u diretti eżistenti fiż-żona $1. index_dependent=Naqas milli jerġa' jibda $1 servizz dipendenti index_manual=Editja Fajls tal-Konfigurazzjoni. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Editja Fajls tal-Konfigurazzjoni manual_editsel=Editja l-fajl tal-konfigurazzjoni FirewallD diff --git a/firewalld/lang/nl.auto b/firewalld/lang/nl.auto index 604e06f15..fb0c08b88 100644 --- a/firewalld/lang/nl.auto +++ b/firewalld/lang/nl.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Laad de FirewallD-server opnieuw en pas de regels to index_listrules_restartdesc=Vermeld details over bestaande uitgebreide en directe FirewallD-regels in zone $1. index_dependent=Kan $1 afhankelijke service niet herstarten index_manual=Configuratiebestanden bewerken. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Configuratiebestanden bewerken manual_editsel=Bewerk FirewallD-configuratiebestand diff --git a/firewalld/lang/no.auto b/firewalld/lang/no.auto index 3075b63dc..403412c41 100644 --- a/firewalld/lang/no.auto +++ b/firewalld/lang/no.auto @@ -15,7 +15,6 @@ index_restart_firewallddesc=Last inn FirewallD-serveren på nytt og bruk reglene index_listrules_restartdesc=Vis detaljer om eksisterende rike og direkte FirewallD-regler i $1-sonen. index_dependent=Kunne ikke starte $1 avhengig tjeneste på nytt index_manual=Rediger konfigurasjonsfiler. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Rediger konfigurasjonsfiler manual_editsel=Rediger FirewallD-konfigurasjonsfilen diff --git a/firewalld/lang/pl.auto b/firewalld/lang/pl.auto index 435b94eec..40d80156e 100644 --- a/firewalld/lang/pl.auto +++ b/firewalld/lang/pl.auto @@ -17,7 +17,6 @@ index_restart_firewallddesc=Załaduj ponownie serwer FirewallD i zastosuj reguł index_listrules_restartdesc=Wyświetl szczegółowe informacje o istniejących rozbudowanych i bezpośrednich regułach FirewallD w strefie $1. index_dependent=Nie można ponownie uruchomić zależnej usługi $1 index_manual=Edytuj pliki konfiguracyjne. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Edytuj pliki konfiguracyjne manual_editsel=Edytuj plik konfiguracyjny FirewallD diff --git a/firewalld/lang/pt.auto b/firewalld/lang/pt.auto index aff5a5241..de4dc0d9d 100644 --- a/firewalld/lang/pt.auto +++ b/firewalld/lang/pt.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Recarregue o servidor FirewallD e aplique as regras index_listrules_restartdesc=Liste detalhes sobre regras de FirewallD avançadas e diretas existentes na zona $1. index_dependent=Falha ao reiniciar $1 serviço dependente index_manual=Editar arquivos de configuração. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Editar arquivos de configuração manual_editsel=Editar arquivo de configuração do FirewallD diff --git a/firewalld/lang/pt_BR.auto b/firewalld/lang/pt_BR.auto index aff5a5241..de4dc0d9d 100644 --- a/firewalld/lang/pt_BR.auto +++ b/firewalld/lang/pt_BR.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Recarregue o servidor FirewallD e aplique as regras index_listrules_restartdesc=Liste detalhes sobre regras de FirewallD avançadas e diretas existentes na zona $1. index_dependent=Falha ao reiniciar $1 serviço dependente index_manual=Editar arquivos de configuração. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Editar arquivos de configuração manual_editsel=Editar arquivo de configuração do FirewallD diff --git a/firewalld/lang/ro.auto b/firewalld/lang/ro.auto index eb6f964b8..6aa23c845 100644 --- a/firewalld/lang/ro.auto +++ b/firewalld/lang/ro.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Reîncărcați serverul FirewallD și aplicați regu index_listrules_restartdesc=Listați detalii despre regulile FirewallD bogate și directe existente în zona $1. index_dependent=Nu s-a repornit serviciul dependent $1 index_manual=Editați fișierele de configurare. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Editați fișierele de configurare manual_editsel=Editați fișierul de configurare FirewallD diff --git a/firewalld/lang/ru.auto b/firewalld/lang/ru.auto index 8ae84877a..df05ca883 100644 --- a/firewalld/lang/ru.auto +++ b/firewalld/lang/ru.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Перезагрузите сервер FirewallD и index_listrules_restartdesc=Список сведений о существующих полнофункциональных и прямых правилах FirewallD в зоне $1. index_dependent=Не удалось перезапустить зависимую службу $1 index_manual=Редактировать файлы конфигурации. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Редактировать файлы конфигурации manual_editsel=Отредактируйте файл конфигурации FirewallD diff --git a/firewalld/lang/sk.auto b/firewalld/lang/sk.auto index 0c54f6024..64c2236a4 100644 --- a/firewalld/lang/sk.auto +++ b/firewalld/lang/sk.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Znova načítajte server FirewallD a použite pravid index_listrules_restartdesc=Uveďte podrobnosti o existujúcich bohatých a priamych pravidlách brány FirewallD v zóne $1. index_dependent=Nepodarilo sa reštartovať službu závislú od $1 index_manual=Upravte konfiguračné súbory. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Upravte konfiguračné súbory manual_editsel=Upravte konfiguračný súbor FirewallD diff --git a/firewalld/lang/sl.auto b/firewalld/lang/sl.auto index 0763ee667..42b550518 100644 --- a/firewalld/lang/sl.auto +++ b/firewalld/lang/sl.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Ponovno naložite strežnik FirewallD in uporabite p index_listrules_restartdesc=Navedite podrobnosti o obstoječih obogatenih in neposrednih pravilih FirewallD v območju $1. index_dependent=Ponovni zagon odvisne storitve $1 ni uspel index_manual=Urejanje konfiguracijskih datotek. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Urejanje konfiguracijskih datotek manual_editsel=Uredite konfiguracijsko datoteko FirewallD diff --git a/firewalld/lang/sv.auto b/firewalld/lang/sv.auto index ff4d385cc..a1ab01cc2 100644 --- a/firewalld/lang/sv.auto +++ b/firewalld/lang/sv.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Ladda om FirewallD-servern och tillämpa reglerna so index_listrules_restartdesc=Lista detaljer om befintliga rika och direkta FirewallD-regler i $1-zonen. index_dependent=Det gick inte att starta om $1 beroende tjänst index_manual=Redigera konfigurationsfiler. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Redigera konfigurationsfiler manual_editsel=Redigera FirewallD-konfigurationsfil diff --git a/firewalld/lang/th.auto b/firewalld/lang/th.auto index 68dbcaa0c..ba12925db 100644 --- a/firewalld/lang/th.auto +++ b/firewalld/lang/th.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=โหลดเซิร์ฟเวอร์ Firewa index_listrules_restartdesc=แสดงรายการรายละเอียดเกี่ยวกับกฎ FirewallD แบบสมบูรณ์และโดยตรงที่มีอยู่ในโซน $1 index_dependent=ไม่สามารถเริ่มบริการที่ขึ้นอยู่กับ $1 ใหม่ index_manual=แก้ไขไฟล์กำหนดค่า -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=แก้ไขไฟล์กำหนดค่า manual_editsel=แก้ไขไฟล์การกำหนดค่า FirewallD diff --git a/firewalld/lang/tr.auto b/firewalld/lang/tr.auto index c76623de6..0fb2887ab 100644 --- a/firewalld/lang/tr.auto +++ b/firewalld/lang/tr.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=FirewallD sunucusunu yeniden yükleyin ve kalıcı o index_listrules_restartdesc=$1 bölgesindeki mevcut zengin ve doğrudan FirewallD kurallarıyla ilgili ayrıntıları listeleyin. index_dependent=$1 bağımlı hizmet yeniden başlatılamadı index_manual=Yapılandırma Dosyalarını Düzenleyin. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Yapılandırma Dosyalarını Düzenle manual_editsel=FirewallD yapılandırma dosyasını düzenleyin diff --git a/firewalld/lang/uk.auto b/firewalld/lang/uk.auto index 29f724d81..651c1bb22 100644 --- a/firewalld/lang/uk.auto +++ b/firewalld/lang/uk.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Перезавантажте сервер FirewallD index_listrules_restartdesc=Перелік інформації про існуючі розширені та прямі правила FirewallD у зоні $1. index_dependent=Не вдалося перезапустити залежну службу $1 index_manual=Редагувати конфігураційні файли. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Редагувати конфігураційні файли manual_editsel=Відредагуйте файл конфігурації FirewallD diff --git a/firewalld/lang/ur.auto b/firewalld/lang/ur.auto index 64aa55dcd..d7f7095be 100644 --- a/firewalld/lang/ur.auto +++ b/firewalld/lang/ur.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=FirewallD سرور کو دوبارہ لوڈ کریں index_listrules_restartdesc=$1 زون میں موجودہ امیر اور براہ راست فائر وال ڈی قوانین کے بارے میں تفصیلات درج کریں۔ index_dependent=$1 پر منحصر سروس کو دوبارہ شروع کرنے میں ناکام index_manual=کنفگ فائلوں میں ترمیم کریں۔ -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=کنفگ فائلوں میں ترمیم کریں۔ manual_editsel=FirewallD کنفیگریشن فائل میں ترمیم کریں۔ diff --git a/firewalld/lang/vi.auto b/firewalld/lang/vi.auto index 4e3853350..16220fe41 100644 --- a/firewalld/lang/vi.auto +++ b/firewalld/lang/vi.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=Tải lại máy chủ FirewallD và áp dụng các index_listrules_restartdesc=Liệt kê chi tiết về các quy tắc FirewallD trực tiếp và phong phú hiện có trong vùng $1. index_dependent=Không thể khởi động lại dịch vụ phụ thuộc $1 index_manual=Chỉnh sửa tập tin cấu hình. -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=Chỉnh sửa tập tin cấu hình manual_editsel=Chỉnh sửa tệp cấu hình FirewallD diff --git a/firewalld/lang/zh.auto b/firewalld/lang/zh.auto index f7a78b334..3727103c5 100644 --- a/firewalld/lang/zh.auto +++ b/firewalld/lang/zh.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=重新加载 FirewallD 服务器并应用永久创 index_listrules_restartdesc=列出有关 $1 区域中现有丰富和直接 FirewallD 规则的详细信息。 index_dependent=无法重新启动 $1 相关服务 index_manual=编辑配置文件。 -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=编辑配置文件 manual_editsel=编辑 FirewallD 配置文件 diff --git a/firewalld/lang/zh_TW.auto b/firewalld/lang/zh_TW.auto index 8e974a8da..8dd551dae 100644 --- a/firewalld/lang/zh_TW.auto +++ b/firewalld/lang/zh_TW.auto @@ -45,7 +45,6 @@ index_restart_firewallddesc=重新加載 FirewallD 服務器並應用永久創 index_listrules_restartdesc=列出有關 $1 區域中現有豐富和直接 FirewallD 規則的詳細信息。 index_dependent=無法重新啟動 $1 相關服務 index_manual=編輯配置文件。 -index_downrules=FirewallD rules cannot be created or edited and are not enforced unless the server is running. manual_title=編輯配置文件 manual_editsel=編輯 FirewallD 配置文件 diff --git a/flashterm/lang/af.auto b/flashterm/lang/af.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/af.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/ar.auto b/flashterm/lang/ar.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/ar.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/be.auto b/flashterm/lang/be.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/be.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/bg.auto b/flashterm/lang/bg.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/bg.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/ca.auto b/flashterm/lang/ca.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/ca.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/cs.auto b/flashterm/lang/cs.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/cs.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/da.auto b/flashterm/lang/da.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/da.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/de b/flashterm/lang/de index 99a5c973f..9f9a35fe8 100644 --- a/flashterm/lang/de +++ b/flashterm/lang/de @@ -1,4 +1,4 @@ index_title=FlashTerm index_esocket=Socket-Fehler: $1 index_eport=Port $1 wird bereits verwendet, möglicherweise von einem anderen Flash-Policy-Server. -index_etelnet=Dieses System betreibt keinen Telnet-Server auf Port $1. +index_etelnet=Dieses System betreibt keinen Telnet-Server auf Port $1. \ No newline at end of file diff --git a/flashterm/lang/el.auto b/flashterm/lang/el.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/el.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/es.auto b/flashterm/lang/es.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/es.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/eu.auto b/flashterm/lang/eu.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/eu.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/fa.auto b/flashterm/lang/fa.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/fa.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/fi.auto b/flashterm/lang/fi.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/fi.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/fr.auto b/flashterm/lang/fr.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/fr.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/he.auto b/flashterm/lang/he.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/he.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/hr.auto b/flashterm/lang/hr.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/hr.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/hu.auto b/flashterm/lang/hu.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/hu.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/it.auto b/flashterm/lang/it.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/it.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/ja.auto b/flashterm/lang/ja.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/ja.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/ko.auto b/flashterm/lang/ko.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/ko.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/lt.auto b/flashterm/lang/lt.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/lt.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/lv.auto b/flashterm/lang/lv.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/lv.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/ms.auto b/flashterm/lang/ms.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/ms.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/mt.auto b/flashterm/lang/mt.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/mt.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/nl.auto b/flashterm/lang/nl.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/nl.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/no.auto b/flashterm/lang/no.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/no.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/pl.auto b/flashterm/lang/pl.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/pl.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/pt.auto b/flashterm/lang/pt.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/pt.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/pt_BR.auto b/flashterm/lang/pt_BR.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/pt_BR.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/ro.auto b/flashterm/lang/ro.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/ro.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/ru.auto b/flashterm/lang/ru.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/ru.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/sk.auto b/flashterm/lang/sk.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/sk.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/sl.auto b/flashterm/lang/sl.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/sl.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/sv.auto b/flashterm/lang/sv.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/sv.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/th.auto b/flashterm/lang/th.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/th.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/tr.auto b/flashterm/lang/tr.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/tr.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/uk.auto b/flashterm/lang/uk.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/uk.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/ur.auto b/flashterm/lang/ur.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/ur.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/vi.auto b/flashterm/lang/vi.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/vi.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/zh.auto b/flashterm/lang/zh.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/zh.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/flashterm/lang/zh_TW.auto b/flashterm/lang/zh_TW.auto deleted file mode 100644 index 366ee54b0..000000000 --- a/flashterm/lang/zh_TW.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FlashTerm -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/foobar/lang/af.auto b/foobar/lang/af.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/af.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/ar.auto b/foobar/lang/ar.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/ar.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/be.auto b/foobar/lang/be.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/be.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/bg.auto b/foobar/lang/bg.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/bg.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/ca.auto b/foobar/lang/ca.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/ca.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/cs.auto b/foobar/lang/cs.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/cs.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/da.auto b/foobar/lang/da.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/da.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/de b/foobar/lang/de index 23dd564ca..986c70344 100644 --- a/foobar/lang/de +++ b/foobar/lang/de @@ -18,4 +18,4 @@ save_egone=Website existiert nicht mehr log_create=Website $1 erstellt log_modify=Website $1 geändert -log_delete=Website $1 gelöscht +log_delete=Website $1 gelöscht \ No newline at end of file diff --git a/foobar/lang/el.auto b/foobar/lang/el.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/el.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/es.auto b/foobar/lang/es.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/es.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/eu.auto b/foobar/lang/eu.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/eu.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/fa.auto b/foobar/lang/fa.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/fa.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/fi.auto b/foobar/lang/fi.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/fi.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/fr.auto b/foobar/lang/fr.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/fr.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/he.auto b/foobar/lang/he.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/he.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/hr.auto b/foobar/lang/hr.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/hr.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/hu.auto b/foobar/lang/hu.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/hu.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/it.auto b/foobar/lang/it.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/it.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/ja.auto b/foobar/lang/ja.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/ja.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/ko.auto b/foobar/lang/ko.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/ko.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/lt.auto b/foobar/lang/lt.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/lt.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/lv.auto b/foobar/lang/lv.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/lv.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/ms.auto b/foobar/lang/ms.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/ms.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/mt.auto b/foobar/lang/mt.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/mt.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/nl.auto b/foobar/lang/nl.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/nl.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/no.auto b/foobar/lang/no.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/no.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/pl.auto b/foobar/lang/pl.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/pl.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/pt.auto b/foobar/lang/pt.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/pt.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/pt_BR.auto b/foobar/lang/pt_BR.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/pt_BR.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/ro.auto b/foobar/lang/ro.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/ro.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/ru.auto b/foobar/lang/ru.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/ru.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/sk.auto b/foobar/lang/sk.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/sk.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/sl.auto b/foobar/lang/sl.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/sl.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/sv.auto b/foobar/lang/sv.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/sv.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/th.auto b/foobar/lang/th.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/th.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/tr.auto b/foobar/lang/tr.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/tr.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/uk.auto b/foobar/lang/uk.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/uk.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/ur.auto b/foobar/lang/ur.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/ur.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/vi.auto b/foobar/lang/vi.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/vi.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/zh.auto b/foobar/lang/zh.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/zh.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/foobar/lang/zh_TW.auto b/foobar/lang/zh_TW.auto deleted file mode 100644 index d1aa15d2b..000000000 --- a/foobar/lang/zh_TW.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_domain=Website domain -index_directory=Serve pages from directory -index_none=No websites have been created yet. -index_add=Add a new website. -index_return=website list - -edit_title=Edit Website -create_title=Create Website -edit_header=Foobar Webserver website details -edit_domain=Website domain name -edit_directory=Directory containing website contents - -save_err=Failed to save website -save_edomain=Missing or invalid domain name -save_edirectory=Directory must be an absolute path -save_edirectory2=Directory does not exist -save_egone=Website no longer exists - -log_create=Created website $1 -log_modify=Modified website $1 -log_delete=Deleted website $1 diff --git a/format/lang/de b/format/lang/de index e9dc40bef..70ef36deb 100644 --- a/format/lang/de +++ b/format/lang/de @@ -146,4 +146,4 @@ acl_dall=Alle Festplatten acl_dsel=Ausgewählt.. acl_view=Kann Festplatten und Partitionen bearbeiten? -ecannot=Sie dürfen Partitionen nicht bearbeiten +ecannot=Sie dürfen Partitionen nicht bearbeiten \ No newline at end of file diff --git a/frox/lang/af.auto b/frox/lang/af.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/af.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/ar.auto b/frox/lang/ar.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/ar.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/be.auto b/frox/lang/be.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/be.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/bg.auto b/frox/lang/bg.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/bg.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/ca b/frox/lang/ca index 1c67eb655..532a5c568 100644 --- a/frox/lang/ca +++ b/frox/lang/ca @@ -9,7 +9,6 @@ index_start=Inicia el Servidor Frox index_startdesc=Fes clic sobre aquest botó per iniciar el procés servidor de proxy FTP Frox. Si has configurat correctament el tallafocs, les connexions FTP encaminades a través d'aquest servidor no funcionaran fins que Frox s'estigui executant. index_inetd=Frox està configurat per executar-se des d'inetd, així que no es pot iniciar ni aturar utilitzant aquest mòdul. index_return=a l'índex de mòduls - net_title=Opcions de Xarxa net_header=Opcions relatives a la xarxa edit_Listen=Escolta les adreces @@ -32,7 +31,6 @@ net_eproxy=Hi falta el servidor proxy adreça:port o bé és invàlid net_eip=Hi falta l'adreça IP o bé és invàlida net_eresolv=Hi falta el nom del DNS o bé és invàlid net_eiface=Hi falta el nom de la interfície o bé és invàlida - general_title=Opcions Generals general_header=Opcions generals d'usuari,grup i fitxers Frox edit_User=Executa com a usuari Unix @@ -51,7 +49,6 @@ edit_egroup=Hi falta el nom del grup Unix o bé és invàlid edit_efrom=Hi falta el número de port inicial o bé és invàlid edit_eto=Hi falta el número de port final o bé és invàlid edit_erange=El port inicial ha de ser menor que el port final - ftp_title=Opcions del Protocol FTP ftp_header=Opcions de proxy del protocol FTP edit_APConv=Converteix les connexions actives a passives @@ -67,7 +64,6 @@ edit_from=De edit_to=a ftp_err=No s'han pogut desar les opcions del protocol FTP ftp_econv=No es pot activar al mateix temps la conversió d'activa a passiva i de passiva a activa! - cache_title=Opcions del Cau cache_header=Opcions del cau i de rastreig de virus cache_module=Mode del cau @@ -89,7 +85,6 @@ cache_esize=Hi falta la mida o bé és invàlida cache_eproxy=Hi falta el nom:port o bé és invàlid cache_escanner=Hi falta el programa de rastreig o bé és invàlid cache_eint=Hi falta o bé no és numèric - acl_title=Control d'Accés acl_header=Opcions de control d'accés i de limitació de recursos edit_DoNTP=Accepta també les connexions de proxy no transparents @@ -115,7 +110,6 @@ acl_esrc=Hi falta l'adreça client, xarxa/mida o xarxa/màscara, o bé és invà acl_edest=Hi falta l'adreça del servidor, xarxa/mida o xarxa/màscara a l'ACL $1 acl_eports=Llista de de ports o rangs de ports invàlida a l'ACL $1 acl_enone=No s'ha introduït cap entrada a la llista de control d'accés - iptables_title=Configuració del Redireccionament de Ports iptables_inst0=No sembla que les ordres del tallafoc IPtables necessàries per configurar el redireccionament de ports estiguin instal·lades al sistema. Mira el mòdul Tallafocs Linux per a més detalls. iptables_inst1=No sembla que el mòdul del Tallafocs Linux estigui completament configurat. Aquest mòdul utilitza aquest altre per tal de configurar el redireccionament de ports. @@ -128,11 +122,9 @@ iptables_err=No s'ha pogut desar el redireccionament de ports iptables_enet=Hi falta l'adreça de xarxa o bé és invàlida (hauria de ser com 192.168.1.0/24) iptables_eapply=L'aplicació ha fallat: $1 iptables_eiface=Hi falta la interfície de xarxa o bé és invàlida - start_err=No s'ha pogut iniciar Frox stop_err=No s'ha pogut aturar Frox stop_egone=Ja no està en execució! - log_net=S'han canviat les opcions de xarxa log_general=S'han canviat les opcions generals log_ftp=S'han canviat les opcions del protocol FTP diff --git a/frox/lang/cs.auto b/frox/lang/cs.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/cs.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/da.auto b/frox/lang/da.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/da.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/de b/frox/lang/de index 7d2e27ebb..d74188445 100644 --- a/frox/lang/de +++ b/frox/lang/de @@ -1,6 +1,7 @@ index_title=Frox-FTP-Proxy index_econf=Die Frox-Konfigurationsdatei $1 wurde auf Ihrem System nicht gefunden. Möglicherweise ist sie nicht installiert, oder die Modulkonfiguration ist falsch. index_ecmd=Das Frox-Server-Programm $1 wurde auf Ihrem System nicht gefunden. Möglicherweise ist es nicht installiert, oder die Modulkonfiguration ist falsch. +#index_version=Frox-Version $1 index_apply=Konfiguration anwenden index_applydesc=Klicken Sie auf diese Schaltfläche, um die aktuelle Frox-Konfiguration durch Senden eines HUP-Signals an seinen Prozess zu aktivieren. index_stop=Frox-Server stoppen @@ -142,4 +143,4 @@ log_iptables_1=Portweiterleitung aktiviert log_iptables_2=Portweiterleitung deaktiviert log_stop=Frox-Server gestoppt log_start=Frox-Server gestartet -log_apply=Konfiguration angewendet +log_apply=Konfiguration angewendet \ No newline at end of file diff --git a/frox/lang/el.auto b/frox/lang/el.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/el.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/es.auto b/frox/lang/es.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/es.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/eu.auto b/frox/lang/eu.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/eu.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/fa.auto b/frox/lang/fa.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/fa.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/fi.auto b/frox/lang/fi.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/fi.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/fr.auto b/frox/lang/fr.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/fr.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/he.auto b/frox/lang/he.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/he.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/hr.auto b/frox/lang/hr.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/hr.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/hu.auto b/frox/lang/hu.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/hu.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/it.auto b/frox/lang/it.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/it.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/ja.auto b/frox/lang/ja.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/ja.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/ko.auto b/frox/lang/ko.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/ko.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/lt.auto b/frox/lang/lt.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/lt.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/lv.auto b/frox/lang/lv.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/lv.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/ms.auto b/frox/lang/ms.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/ms.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/mt.auto b/frox/lang/mt.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/mt.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/nl b/frox/lang/nl index 753df925a..9640c4d60 100644 --- a/frox/lang/nl +++ b/frox/lang/nl @@ -9,7 +9,6 @@ index_start=Start Frox Server index_startdesc=Klik op deze knop om het Frox proxy server proces te starten. Als de firewall goed is opgezet zullen FTP verbindingen die lopen via deze server niet werken totdat Frox is aan het werk is. index_inetd=Frox is geconfigureerd om uitgevoerd te worden vanuit Inetd, en kan daarom niet gestart en gestopt worden met gebruik van deze module. index_return=module index - net_title=Netwerk Opties net_header=Netwerk gerelateerd opties edit_Listen=Luister op adressen @@ -32,7 +31,6 @@ net_eproxy=Ontbrekende of ongeldig proxy server adres:poort net_eip=Ontbrekende of ongeldig IP adres net_eresolv=Ontbrekende of ongeldige DNS naam net_eiface=Ontbrekende of ongeldig interface naam - general_title=Algemene Opties general_header=Algemene Frox gebruiker, groep en file opties edit_User=Uitvoeren als Unix gebruiker @@ -51,7 +49,6 @@ edit_egroup=Ontbrekende of ongeldige Unix groep naam edit_efrom=Ontbrekende of ongeldige start poort nummer edit_eto=Ontbrekende of ongeldige eind poort nummer edit_erange=Start poort nummer moet lager zijn dan eind poort nummer - ftp_title=FTP Protocol Opties ftp_header=FTP protocol proxying opties edit_APConv=Converteer actieve verbindingen naar passieve? @@ -67,7 +64,6 @@ edit_from=Van edit_to=naar ftp_err=Mislukt om FTP protocol opties op te slaan ftp_econv=Tegelijk actief naar passief en passief naar actief aanzetten kan niet in één keer! - cache_title=Caching Opties cache_header=Caching en virus scanner opties cache_module=Caching mode @@ -89,7 +85,6 @@ cache_esize=Ontbrekende of ongeldige grote cache_eproxy=Ontbrekende of ongeldige hostnaam:poort cache_escanner=Ontbrekende of niet bestaand scanner programma cache_eint=Ontbrekend of niet-numeriek - acl_title=Toegang Controle acl_header=Toegang kontrole en bron limiet opties edit_DoNTP=Ook niet-transparante proxy verbindingen toestaan? @@ -115,7 +110,6 @@ acl_esrc=Ontbrekende of ongeldige client adres, netwerk/grote of netwerk/netmask acl_edest=Ontbrekende of ongeldige server adres, netwerk/grote of netwerk/netmask in ACL $1 acl_eports=Ongeldige komma-scheiding lijst met poorten of poort reeksen in ACL $1 acl_enone=Geen toegang controle lijst ingangen ingevuld - iptables_title=Poort Omleiding Instellen iptables_inst0=De IPtables firewall opdrachten die nodig zijn om de poort omleiding op te zetten lijken niet geinstalleerd te zijn op uw systeem. Bekijk de Linux Firewall module voor meer details. iptables_inst1=De Linux Firewall module lijkt niet volledig opgezet te zijn op uw systeem. Deze module word gebruikt om poort omleiding op te zetten voor Frox. @@ -128,11 +122,9 @@ iptables_err=Mislukt om poort doorsturen op te slaan iptables_enet=Ontbrekende of ongeldige netwerk adres (moet de vorm hebben 192.168.1.0/24) iptables_eapply=Toevoegen mislukt : $1 iptables_eiface=Ontbrekende of ongeldige netwerk interface - start_err=Mislukt om Frox te starten stop_err=Mislukt om Frox te stoppen stop_egone=Werkt niet langer! - log_net=Veranderde netwerk opties log_general=Veranderde algemene opties log_ftp=Veranderde FTP protocol opties diff --git a/frox/lang/no b/frox/lang/no index bf1ec2bdd..1cf4a682d 100644 --- a/frox/lang/no +++ b/frox/lang/no @@ -9,7 +9,6 @@ index_start=Start Frox tjener index_startdesc=Klikk denne knappen for å starte Frox proxy tjener prosessen. Dersom brannmuren er riktig satt opp vil FTP tilkoblinger rutet via denne tjeneren ikke virke før Frox kjører. index_inetd=Frox er konfigurert til å kjøre fra inetd, og kan derfor ikke startes og stoppes fra denne modulen. index_return=modul indeks - net_title=Nettverks innstillinger net_header=Nettverks-relaterte innstillinger edit_Listen=Lytt på adressene @@ -32,7 +31,6 @@ net_eproxy=Manglende eller ugyldig proxy tjener adresse:port net_eip=Manglende eller ugyldig IP adresse net_eresolv=Manglende eller ugyldig DNS navn net_eiface=Manglende eller ugyldig grensesnitt navn - general_title=Generelle innstillinger general_header=Generelle Frox bruker-, gruppe- og filinnstillinger edit_User=Kjør som Unix bruker @@ -51,7 +49,6 @@ edit_egroup=Manglende eller ugyldig Unix gruppenavn edit_efrom=Manglende eller ugyldig start portnummer edit_eto=Manglende eller ugyldig slutt portnummer edit_erange=Start port må være mindre enn slutt port - ftp_title=FTP protokoll innstillinger ftp_header=Innstillinger for FTP protokoll proxying edit_APConv=Konverter aktive tilkoblinger til passive? @@ -67,7 +64,6 @@ edit_from=Fra edit_to=til ftp_err=Kunne ikke lagre FTP protokollinnstillinger ftp_econv=Du kan ikke aktivere både aktiv til passiv og passiv til aktiv konvertering! - cache_title=Cachin innstillinger cache_header=Innstillinger for caching og virus scanning cache_module=Caching modus @@ -89,7 +85,6 @@ cache_esize=Manglende eller ugyldig størrelse cache_eproxy=Manglende eller ugyldig vertsnavn:port cache_escanner=Manglende eller ikke-eksisterende scanner program cache_eint=Manglende eller ikke-numerisk - acl_title=Tilgangskontroll acl_header=Innstillinger for tilgangskontroll og ressursbegrensing edit_DoNTP=Aksepter ikke-transparente proxy tilkoblinger også? @@ -115,7 +110,6 @@ acl_esrc=Manglende eller ugyldig klient adresse, nettverk/størrelse eller nettv acl_edest=Manglende eller ugyldig tjeneradresse, nettverk/størrelse eller nettverk/nettmaske i ACL $1 acl_eports=Uygldig komma-separert liste med porter eller portintervaller i ACL $1 acl_enone=Ingen tilgangskontrollliste oppføringer ble angitt - iptables_title=Oppsett av redirigering av port iptables_inst0=IPtables brannmur kommandoene som er nødvendige for å sette opp port redirigering ser ikke ut til å være installert på systemet ditt. Sjekk modulen Linux Brannmur for flere detaljer. iptables_inst1=Det ser ikke ut til at modulen Linux Brannmur er fullt satt opp på systemet ditt. Denne modulen bruker brannmur modulen til å sette opp Frox port redirigering. @@ -128,11 +122,9 @@ iptables_err=Kunne ikke lagre videresending av port iptables_enet=Manglende eller ugyldig nettverksadresse (må se ut som 192.168.1.0/24) iptables_eapply=Bruk feilet : $1 iptables_eiface=Manglende eller ugyldig nettverksgrensesnitt - start_err=Kunne ikke starte Frox stop_err=Kunne ikke stoppe Frox stop_egone=Kjører ikke lenger! - log_net=Endret nettverksinnstillinger log_general=Endret generelle innstillinger log_ftp=Endret FTP protokoll innstillinger diff --git a/frox/lang/pl.auto b/frox/lang/pl.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/pl.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/pt.auto b/frox/lang/pt.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/pt.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/pt_BR.auto b/frox/lang/pt_BR.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/pt_BR.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/ro.auto b/frox/lang/ro.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/ro.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/ru.auto b/frox/lang/ru.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/ru.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/sk.auto b/frox/lang/sk.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/sk.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/sl.auto b/frox/lang/sl.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/sl.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/sv.auto b/frox/lang/sv.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/sv.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/th.auto b/frox/lang/th.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/th.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/tr.auto b/frox/lang/tr.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/tr.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/uk.auto b/frox/lang/uk.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/uk.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/ur.auto b/frox/lang/ur.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/ur.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/vi.auto b/frox/lang/vi.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/vi.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/zh.auto b/frox/lang/zh.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/zh.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/frox/lang/zh_TW.auto b/frox/lang/zh_TW.auto deleted file mode 100644 index bda5126b1..000000000 --- a/frox/lang/zh_TW.auto +++ /dev/null @@ -1,145 +0,0 @@ -index_title=Frox FTP Proxy -index_econf=The Frox configuration file $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_ecmd=The Frox server program $1 was not found on your system. Maybe it is not installed, or the module configuration is incorrect. -index_apply=Apply Configuration -index_applydesc=Click this button to activate the current Frox configuration by sending a HUP signal to its process. -index_stop=Stop Frox Server -index_stopdesc=Click this button to shut down the Frox proxy server process. FTP connections routed through this server will stop working until the server is re-started. -index_start=Start Frox Server -index_startdesc=Click this button to start up the Frox proxy server process. If the firewall has been set up correctly, FTP connections routed via this server will not work until Frox is running. -index_inetd=Frox is configured to run from Inetd, and so cannot be started or stopped using this module. -index_return=module index - -net_title=Network Options -net_header=Networking related options -edit_Listen=Listen on addresses -net_all=All -edit_Port=Listen on port -edit_BindToDevice=Listen on interface -edit_FromInetd=Run from inetd? -edit_NoDetach=Server run mode -net_bg=Background -net_fg=Foreground -net_none=None -edit_ResolvLoadHack=Test address to resolve -edit_FTPProxy=FTP proxy server (name:port) -edit_TcpOutgoingAddr=Source address for outgoing connections -edit_PASVAddress=Source address for PASV connections -net_err=Failed to save network options -net_ehost=Missing or invalid IP address or hostname -net_eport=Missing or invalid port number -net_eproxy=Missing or invalid proxy server address:port -net_eip=Missing or invalid IP address -net_eresolv=Missing or invalid DNS name -net_eiface=Missing or invalid interface name - -general_title=General Options -general_header=General Frox user, group and file options -edit_User=Run as Unix user -edit_Group=Run as Unix group -edit_WorkingDir=Temporary files directory -edit_DontChroot=Chroot to directory? -edit_LogLevel=Logging level -edit_PidFile=Write PID to file -general_nowhere=Nowhere -general_err=Failed to save general options -general_edir=Missing or non-existant directory -general_elevel=Missing or not a number -general_epidfile=Missing or non-absolute path -edit_euser=Missing or invalid Unix username -edit_egroup=Missing or invalid Unix group name -edit_efrom=Missing or invalid starting port number -edit_eto=Missing or invalid ending port number -edit_erange=Starting port must be less than ending port - -ftp_title=FTP Protocol Options -ftp_header=FTP protocol proxying options -edit_APConv=Convert active connections to passive? -edit_PAConv=Convert passive connections to active? -edit_BounceDefend=Block data requests to low ports? -edit_SameAddress=Only allow data connections from client address? -edit_AllowNonASCII=Allow non-ascii filenames? -edit_TransparentData=Proxy data connections too? -edit_ControlPorts=Outgoing control ports range -edit_PassivePorts=Outgoing passive ports range -edit_ActivePorts=Outgoing active ports range -edit_from=From -edit_to=to -ftp_err=Failed to save FTP protocol options -ftp_econv=Both active to passive and passive to active conversion cannot be enabled at once! - -cache_title=Caching Options -cache_header=Caching and virus scanning options -cache_module=Caching mode -cache_none=Disabled -cache_local=Use local temp files directory -cache_http=Use HTTP proxy server .. -edit_CacheSize=Local cache size -edit_HTTPProxy=Proxy server hostname:port -edit_MinCacheSize=Minimum size to cache -edit_StrictCaching=Strict cache filename mapping? -edit_CacheOnFQDN=Lookup full server hostnames for caching? -edit_CacheAll=Cache non-anonymous downloads too? -edit_VirusScanner=Virus scanner program -edit_VSOK=Virus scanner OK exit status -edit_VSProgressMsgs=Seconds between progress messages -cache_vnone=None (scanning disabled) -cache_err=Failed to save caching options -cache_esize=Missing or invalid size -cache_eproxy=Missing or invalid hostname:port -cache_escanner=Missing or non-existant scanner program -cache_eint=Missing or non-numeric - -acl_title=Access Control -acl_header=Access control and resource limit options -edit_DoNTP=Accept non-transparent proxy connections too? -edit_NTPAddress=Local host:port for non-transparent connections -acl_same=Same as main port -edit_Timeout=Timeout before closing connection -edit_MaxForks=Maximum number of processes -edit_MaxForksPerHost=Maximum number of processes per client -edit_MaxTransferRate=Maximum transfer rate -acl_bps=bytes/sec -acl_acl=Access control list -acl_action=Action -acl_src=Client address/network -acl_dest=Server address/network -acl_ports=Destination ports -acl_any=Any -acl_err=Failed to save access control options -acl_etimeout=Missing or invalid number of seconds -acl_eforks=Missing or invalid number of processes -acl_erate=Missing or invalid bytes per second -acl_entp=Missing or invalid proxy address:port -acl_esrc=Missing or invalid client address, network/size or network/netmask in ACL $1 -acl_edest=Missing or invalid server address, network/size or network/netmask in ACL $1 -acl_eports=Invalid comma-separate list of ports or port ranges in ACL $1 -acl_enone=No access control list entries were entered - -iptables_title=Port Redirection Setup -iptables_inst0=The IPtables firewall commands needed to setup port redirection do not appear to be installed on your system. See the Linux Firewall module for more details. -iptables_inst1=The Linux Firewall module does not appear to have been fully setup on your system. This module makes use of that one to setup Frox port redirection. -iptables_desc=For Frox to work properly, traffic routed through your system on port $1 must be forwarded to port $2, which Frox listens on. This can be done by adding an IPtables rule to your firewall, assuming that it is managed by the Linux Firewall module. -iptables_disabled=Port redirection is disabled -iptables_enabled=Port redirection is enabled, for clients on network $1 -iptables_enabled2=Port redirection is enabled, for clients on interface $1 -iptables_save=Save and Apply -iptables_err=Failed to save port forwarding -iptables_enet=Missing or invalid network address (should be like 192.168.1.0/24) -iptables_eapply=Apply failed : $1 -iptables_eiface=Missing or invalid network interface - -start_err=Failed to start Frox -stop_err=Failed to stop Frox -stop_egone=No longer running! - -log_net=Changed networking options -log_general=Changed general options -log_ftp=Changed FTP protocol options -log_cache=Changed caching options -log_acl=Changed access control options -log_iptables_1=Enabled port redirection -log_iptables_2=Disabled port redirection -log_stop=Stopped Frox server -log_start=Started Frox server -log_apply=Applied configuration diff --git a/fsdump/lang/de b/fsdump/lang/de index 24e9d3222..ad8ae9272 100644 --- a/fsdump/lang/de +++ b/fsdump/lang/de @@ -234,4 +234,4 @@ email_ok=Backup erfolgreich email_failed=Backup fehlgeschlagen! newtape_subject=Bandwechsel $1 für Backup von $2 am $3 -newtape_body=Das Backup von $2 am $3 hat die maximale Datenmenge auf Band $1 erreicht. Sie müssen ein neues Band einlegen und den Link "Band geladen" im Webmin-Dateisystem-Backup-Modul anklicken, damit das Backup fortgesetzt werden kann. +newtape_body=Das Backup von $2 am $3 hat die maximale Datenmenge auf Band $1 erreicht. Sie müssen ein neues Band einlegen und den Link "Band geladen" im Webmin-Dateisystem-Backup-Modul anklicken, damit das Backup fortgesetzt werden kann. \ No newline at end of file diff --git a/ftelnet/lang/af.auto b/ftelnet/lang/af.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/af.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/ar.auto b/ftelnet/lang/ar.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/ar.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/be.auto b/ftelnet/lang/be.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/be.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/bg.auto b/ftelnet/lang/bg.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/bg.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/ca.auto b/ftelnet/lang/ca.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/ca.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/cs.auto b/ftelnet/lang/cs.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/cs.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/da.auto b/ftelnet/lang/da.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/da.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/de b/ftelnet/lang/de index f414dd7e2..c6f1ac053 100644 --- a/ftelnet/lang/de +++ b/ftelnet/lang/de @@ -1,4 +1,4 @@ index_title=FTelnet index_esocket=Socket-Fehler: $1 index_eport=Port $1 wird bereits verwendet, möglicherweise von einem anderen Flash-Policy-Server. -index_etelnet=Auf diesem System läuft kein Telnet-Server auf Port $1. +index_etelnet=Auf diesem System läuft kein Telnet-Server auf Port $1. \ No newline at end of file diff --git a/ftelnet/lang/el.auto b/ftelnet/lang/el.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/el.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/es.auto b/ftelnet/lang/es.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/es.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/eu.auto b/ftelnet/lang/eu.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/eu.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/fa.auto b/ftelnet/lang/fa.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/fa.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/fi.auto b/ftelnet/lang/fi.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/fi.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/fr.auto b/ftelnet/lang/fr.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/fr.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/he.auto b/ftelnet/lang/he.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/he.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/hr.auto b/ftelnet/lang/hr.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/hr.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/hu.auto b/ftelnet/lang/hu.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/hu.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/it.auto b/ftelnet/lang/it.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/it.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/ja.auto b/ftelnet/lang/ja.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/ja.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/ko.auto b/ftelnet/lang/ko.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/ko.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/lt.auto b/ftelnet/lang/lt.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/lt.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/lv.auto b/ftelnet/lang/lv.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/lv.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/ms.auto b/ftelnet/lang/ms.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/ms.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/mt.auto b/ftelnet/lang/mt.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/mt.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/nl.auto b/ftelnet/lang/nl.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/nl.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/no.auto b/ftelnet/lang/no.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/no.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/pl.auto b/ftelnet/lang/pl.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/pl.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/pt.auto b/ftelnet/lang/pt.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/pt.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/pt_BR.auto b/ftelnet/lang/pt_BR.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/pt_BR.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/ro.auto b/ftelnet/lang/ro.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/ro.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/ru.auto b/ftelnet/lang/ru.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/ru.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/sk.auto b/ftelnet/lang/sk.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/sk.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/sl.auto b/ftelnet/lang/sl.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/sl.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/sv.auto b/ftelnet/lang/sv.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/sv.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/th.auto b/ftelnet/lang/th.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/th.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/tr.auto b/ftelnet/lang/tr.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/tr.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/uk.auto b/ftelnet/lang/uk.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/uk.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/ur.auto b/ftelnet/lang/ur.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/ur.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/vi.auto b/ftelnet/lang/vi.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/vi.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/zh.auto b/ftelnet/lang/zh.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/zh.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/ftelnet/lang/zh_TW.auto b/ftelnet/lang/zh_TW.auto deleted file mode 100644 index 4640b2c84..000000000 --- a/ftelnet/lang/zh_TW.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_title=FTelnet -index_esocket=Socket failed : $1 -index_eport=Port $1 is already in use, perhaps by another Flash policy server -index_etelnet=This system is not running a Telnet server on port $1. diff --git a/gray-theme/lang/de b/gray-theme/lang/de index ed8efe3bd..e52e3bf51 100644 --- a/gray-theme/lang/de +++ b/gray-theme/lang/de @@ -75,4 +75,4 @@ overlay_none=Keines - Standardfarben und -symbole verwenden overlay_refresh=Aktualisiere die Benutzeroberfläche von Virtualmin .. overlay_done=.. erledigt overlay_euser=Fehler beim Abrufen der Details des aktuellen Benutzers! -overlay_webmin=Webmin-Konfiguration neu laden .. +overlay_webmin=Webmin-Konfiguration neu laden .. \ No newline at end of file diff --git a/gray-theme/lang/zh b/gray-theme/lang/zh index b97d5dcdc..75afb5e41 100644 --- a/gray-theme/lang/zh +++ b/gray-theme/lang/zh @@ -76,3 +76,4 @@ overlay_refresh=正在刷新Virtualmin用户界面 .. overlay_done=.. 完成 overlay_euser=无法获取当前用户的详细信息！ overlay_webmin=重新加载Webmin配置 .. +__norefs=1 diff --git a/grub/lang/de b/grub/lang/de index 1d38324ff..70737c12d 100644 --- a/grub/lang/de +++ b/grub/lang/de @@ -52,6 +52,7 @@ global_other=Andere global_password=Boot-Passwort global_none=Keine global_password_file=Menüdatei verwenden, wenn Passwort eingegeben wird: +global_pass=Passwort global_err=Fehler beim Speichern der globalen Optionen global_etimeout=Fehlendes oder ungültiges Timeout global_edev=Nicht unterstützte Installations-Festplatte/Partition $1 @@ -72,4 +73,4 @@ log_modify_title=Startoption $1 geändert log_up_title=Startoption $1 nach oben verschoben log_down_title=Startoption $1 nach unten verschoben log_global=Globale Optionen geändert -log_install=GRUB installiert +log_install=GRUB installiert \ No newline at end of file diff --git a/heartbeat/lang/de b/heartbeat/lang/de index 152913ba2..9db7dea0a 100644 --- a/heartbeat/lang/de +++ b/heartbeat/lang/de @@ -100,4 +100,4 @@ auth_esha1=Fehlendes oder ungültiges SHA1-Passwort start_err=Fehler beim Starten von Heartbeat apply_err=Fehler beim Anwenden der Änderungen -apply_epid=Prozess läuft nicht mehr +apply_epid=Prozess läuft nicht mehr \ No newline at end of file diff --git a/help/lang/af.auto b/help/lang/af.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/af.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/ar.auto b/help/lang/ar.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/ar.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/be.auto b/help/lang/be.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/be.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/bg.auto b/help/lang/bg.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/bg.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/ca.auto b/help/lang/ca.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/ca.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/cs b/help/lang/cs index 6e19e0953..6321ec7d6 100644 --- a/help/lang/cs +++ b/help/lang/cs @@ -6,7 +6,6 @@ index_sel=Vybrané moduly .. index_search=Hledat index_header=Globální Webmin hledání index_return=formulář hledání - search_err=Chyba při hledání search_eterms=Chybí podmínka hledání search_emods=Nejsou vybrány žádné moduly diff --git a/help/lang/da.auto b/help/lang/da.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/da.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/de b/help/lang/de index 238b5de52..cc3de0eed 100644 --- a/help/lang/de +++ b/help/lang/de @@ -16,4 +16,4 @@ search_none=Keine Hilfedateien entsprechen Ihrer Suche search_mod=Modul search_page=Hilfeseite search_line=Übereinstimmung in -search_results=Webmin-Hilfeseiten, die mit $1 übereinstimmen +search_results=Webmin-Hilfeseiten, die mit $1 übereinstimmen \ No newline at end of file diff --git a/help/lang/el.auto b/help/lang/el.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/el.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/es b/help/lang/es index d05ee5701..d27be632f 100644 --- a/help/lang/es +++ b/help/lang/es @@ -6,7 +6,6 @@ index_sel=Módulos seleccionados... index_search=Buscar index_header=Búsqueda Global de ayuda de Webmin index_return=formulario de búsqueda - search_err=Falló la búsqueda search_eterms=No se han puesto criterios de búsqueda search_emods=No se han seleccionado módulos diff --git a/help/lang/eu.auto b/help/lang/eu.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/eu.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/fa.auto b/help/lang/fa.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/fa.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/fi.auto b/help/lang/fi.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/fi.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/fr b/help/lang/fr index 4f1db076f..0c35f7ed2 100644 --- a/help/lang/fr +++ b/help/lang/fr @@ -6,7 +6,6 @@ index_sel=Modules sélectionnés ... index_search=Rechercher index_header=Recherche globale dans l'aide de Webmin index_return=formulaire de recherce - search_err=Recherche ratée search_eterms=Terme de recherche manquant search_emods=Aucun module séléctionné diff --git a/help/lang/he.auto b/help/lang/he.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/he.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/hr.auto b/help/lang/hr.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/hr.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/hu b/help/lang/hu index 2247b5427..0381cae27 100644 --- a/help/lang/hu +++ b/help/lang/hu @@ -6,7 +6,6 @@ index_sel=Kiválasztott modulok... index_search=Keresés index_header=Általános keresés a Webmin súgójában index_return=a kereső űrlapra - search_err=Sikertelen keresés search_eterms=A keresett szöveg megadása nem történt meg. search_emods=Nem lett modul kiválasztva diff --git a/help/lang/it b/help/lang/it index f8f0df073..387ec5986 100644 --- a/help/lang/it +++ b/help/lang/it @@ -6,7 +6,6 @@ index_sel=Moduli selezionati index_search=Trova index_header=Ricerca globale nel Webmin Help index_return=pagina di ricerca - search_err=Ricerca fallita search_eterms=Termini di ricerca mancanti search_emods=Non hai scelto i moduli diff --git a/help/lang/ja b/help/lang/ja index 0e55bdba2..ad466b836 100644 --- a/help/lang/ja +++ b/help/lang/ja @@ -6,7 +6,6 @@ index_sel=選択されたモジュール.. index_search=検索 index_header=Webmin ヘルプ グローバル検索 index_return=検索形式 - search_err=検索できませんでした search_eterms=検索する用語が入力されていません search_emods=モジュールが選択されていません diff --git a/help/lang/ko b/help/lang/ko index 5428ecc5e..b1989b343 100644 --- a/help/lang/ko +++ b/help/lang/ko @@ -6,7 +6,6 @@ index_sel=선택한 모듈.. index_search=검색 index_header=Webmin 전체 도움말 검색 index_return=검색 양식 - search_err=검색하지 못했습니다 search_eterms=검색 용어가 없습니다 search_emods=선택한 모듈이 없습니다 diff --git a/help/lang/lt.auto b/help/lang/lt.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/lt.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/lv.auto b/help/lang/lv.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/lv.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/ms b/help/lang/ms index 4997c311b..fd645d898 100644 --- a/help/lang/ms +++ b/help/lang/ms @@ -6,7 +6,6 @@ index_sel=Modul dipilih .. index_search=Carian index_header=Carian Global bantuan Webmin index_return=Borang carian - search_err=Carian telah gagal search_eterms=Hilang terma carian search_emods=Tiada modul dipilih diff --git a/help/lang/mt.auto b/help/lang/mt.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/mt.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/nl.auto b/help/lang/nl.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/nl.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/no.auto b/help/lang/no.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/no.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/pl b/help/lang/pl index f1cf6e58b..87f4fa0c7 100644 --- a/help/lang/pl +++ b/help/lang/pl @@ -6,7 +6,6 @@ index_sel=Wybrane .. index_search=Szukaj index_header=Globalne przeszukiwanie pomocy Webmina index_return=formularza pomocy - search_err=Poszukiwanie nieudane search_eterms=Nie podano szukanych haseł search_emods=Nie wybrano modułów diff --git a/help/lang/pt.auto b/help/lang/pt.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/pt.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/pt_BR.auto b/help/lang/pt_BR.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/pt_BR.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/ro.auto b/help/lang/ro.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/ro.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/ru.auto b/help/lang/ru.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/ru.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/sk.auto b/help/lang/sk.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/sk.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/sl.auto b/help/lang/sl.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/sl.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/sv b/help/lang/sv index 7ae3028a8..fa4d6a0bb 100644 --- a/help/lang/sv +++ b/help/lang/sv @@ -6,7 +6,6 @@ index_sel=Valda moduler ... index_search=Sök index_header=Sök globalt i Hjälp till Webmin index_return=sökformulär - search_err=Sökningen misslyckades search_eterms=Någon sökterm saknades search_emods=Du har inte valt någon modul diff --git a/help/lang/th.auto b/help/lang/th.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/th.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/tr b/help/lang/tr index f510b79ab..fc6aa8b18 100644 --- a/help/lang/tr +++ b/help/lang/tr @@ -6,7 +6,6 @@ index_sel=Seçilen Modüller .. index_search=Ara index_header=Genel Webmin yardım araması index_return=Ara formu - search_err=Arama işleminde hata oluştu search_eterms=Kayıp arama terimleri search_emods=Modül seçilmedi diff --git a/help/lang/uk.auto b/help/lang/uk.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/uk.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/ur.auto b/help/lang/ur.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/ur.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/vi.auto b/help/lang/vi.auto deleted file mode 100644 index b434f1751..000000000 --- a/help/lang/vi.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_title=Webmin Help -index_terms=Search help for -index_mods=Modules to search -index_all=All -index_sel=Selected modules .. -index_search=Search -index_header=Global Webmin help search -index_return=search form - -search_err=Search failed -search_eterms=Missing search terms -search_emods=No modules chosen -search_title=Search Results -search_einclude=Failed to include $1 -search_none=No help files matched your search -search_mod=Module -search_page=Help page -search_line=Match on -search_results=Webmin help pages matching $1 diff --git a/help/lang/zh b/help/lang/zh index 24e7d48ac..adfc3a937 100644 --- a/help/lang/zh +++ b/help/lang/zh @@ -6,7 +6,6 @@ index_sel=已选择的模块.. index_search=搜索 index_header=全部 Webmin 帮助搜索 index_return=搜索表格 - search_err=搜索失败 search_eterms=缺失搜索项 search_emods=没有选择模块 diff --git a/help/lang/zh_TW b/help/lang/zh_TW index c583c2037..f41e34772 100644 --- a/help/lang/zh_TW +++ b/help/lang/zh_TW @@ -6,7 +6,6 @@ index_sel=選擇的模組... index_search=搜尋 index_header=搜尋全域 Webmin 說明 index_return=搜尋表單 - search_err=搜尋失敗 search_eterms=遺失搜尋條件 search_emods=沒有選擇模組 diff --git a/hpuxexports/lang/de b/hpuxexports/lang/de index 79950348a..cf0f8f453 100644 --- a/hpuxexports/lang/de +++ b/hpuxexports/lang/de @@ -74,4 +74,4 @@ log_delete=Gelöschter NFS-Export $1 log_delete_l=Gelöschter NFS-Export $1 zu $2 log_create=Erstellter NFS-Export $1 log_create_l=Erstellter NFS-Export $1 zu $2 -log_apply=Konfiguration angewendet +log_apply=Konfiguration angewendet \ No newline at end of file diff --git a/htpasswd-file/lang/de b/htpasswd-file/lang/de index b0d524d59..0f77ef4cf 100644 --- a/htpasswd-file/lang/de +++ b/htpasswd-file/lang/de @@ -51,4 +51,4 @@ sync_ecannot=Sie dürfen die Synchronisierung nicht konfigurieren log_sync=Synchronisierungsoptionen geändert log_create=Benutzer $1 erstellt log_delete=Benutzer $1 gelöscht -log_modify=Benutzer $1 geändert +log_modify=Benutzer $1 geändert \ No newline at end of file diff --git a/idmapd/lang/de b/idmapd/lang/de index 16ac220d4..69046a951 100644 --- a/idmapd/lang/de +++ b/idmapd/lang/de @@ -8,4 +8,4 @@ nobody_user=Nobody-Benutzer nobody_group=Nobody-Gruppe save=Konfiguration speichern und Daemon neu starten save_err=Konfigurationsdatei $1 konnte nicht gespeichert werden -error_dir=Verzeichnis $1 existiert nicht +error_dir=Verzeichnis $1 existiert nicht \ No newline at end of file diff --git a/inetd/lang/de b/inetd/lang/de index 5d36175ff..7710af759 100644 --- a/inetd/lang/de +++ b/inetd/lang/de @@ -111,4 +111,4 @@ log_modify_rpc_l=RPC $1 Nummer $2 geändert log_delete_rpc_l=RPC $1 Nummer $2 gelöscht log_create_rprog_l=RPC $1 Nummer $2 für Programm $3 erstellt log_modify_rprog_l=RPC $1 Nummer $2 für Programm $3 geändert -log_delete_rprog_l=RPC $1 Nummer $2 für Programm $3 gelöscht +log_delete_rprog_l=RPC $1 Nummer $2 für Programm $3 gelöscht \ No newline at end of file diff --git a/init/lang/de b/init/lang/de index a404b8da5..3ec42fa4b 100644 --- a/init/lang/de +++ b/init/lang/de @@ -267,4 +267,4 @@ launchd_return=Launchd-Agent launchd_econf=Keine Launchd-Konfiguration eingegeben launchd_estart=Fehlender Serverbefehl -syslog_journalctl=SystemD-Protokolle +syslog_journalctl=SystemD-Protokolle \ No newline at end of file diff --git a/inittab/lang/de b/inittab/lang/de index 2f418d45a..6dd4a9f48 100644 --- a/inittab/lang/de +++ b/inittab/lang/de @@ -50,4 +50,4 @@ log_deletes=$1 Init-Prozesse gelöscht apply_err=Fehler beim Anwenden der Konfiguration delete_err=Fehler beim Löschen der Prozesse -delete_enone=Keiner ausgewählt +delete_enone=Keiner ausgewählt \ No newline at end of file diff --git a/ipfilter/lang/de b/ipfilter/lang/de index 7862d9a72..b3f04e02a 100644 --- a/ipfilter/lang/de +++ b/ipfilter/lang/de @@ -312,4 +312,4 @@ net_erdrip='$1' ist keine gültige Ziel-IP-Adresse nat_erdrips=Keine Ziel-IP-Adressen eingegeben nat_erdrport=Fehlender oder ungültiger Zielport -boot_esmf=Der SMF-Dienst $1 existiert nicht oder befindet sich nicht in einem bekannten Zustand +boot_esmf=Der SMF-Dienst $1 existiert nicht oder befindet sich nicht in einem bekannten Zustand \ No newline at end of file diff --git a/ipfw/lang/de b/ipfw/lang/de index e18ad021e..d725d5597 100644 --- a/ipfw/lang/de +++ b/ipfw/lang/de @@ -232,4 +232,4 @@ add_err=Fehler beim Hinzufügen des Servers add_gerr=Fehler beim Hinzufügen der Gruppe add_echeck=Server $1 hat das IPFW-Firewall-Modul nicht add_emissing=Server $1 hat keine IPFW-Firewall eingerichtet -add_ok=Fügte $1 hinzu, mit $2 aktiven Firewall-Regeln. +add_ok=Fügte $1 hinzu, mit $2 aktiven Firewall-Regeln. \ No newline at end of file diff --git a/ipsec/lang/de b/ipsec/lang/de index d87040718..64fc08d4c 100644 --- a/ipsec/lang/de +++ b/ipsec/lang/de @@ -247,4 +247,4 @@ secret_err=Fehler beim Speichern des Geheimschlüssels secret_elast=Der letzte verbleibende Geheimschlüssel kann nicht gelöscht werden secret_ename=Fehlende Hosts, für die der Schlüssel gilt secret_epass=Fehlendes geteiltes Passwort -secret_ersa=Fehlender Wert für RSA $1 +secret_ersa=Fehlender Wert für RSA $1 \ No newline at end of file diff --git a/iscsi-client/lang/de b/iscsi-client/lang/de index 07fbe3cca..1252a6107 100644 --- a/iscsi-client/lang/de +++ b/iscsi-client/lang/de @@ -185,4 +185,4 @@ log_atboot=iSCSI-Client beim Booten aktiviert log_delboot=iSCSI-Client beim Booten deaktiviert log_add_iface=Schnittstelle $1 hinzugefügt log_delete_iface=Schnittstelle $1 entfernt -log_delete_ifaces=$1 Schnittstellen entfernt +log_delete_ifaces=$1 Schnittstellen entfernt \ No newline at end of file diff --git a/iscsi-server/lang/de b/iscsi-server/lang/de index 050ef0377..5fe5d1e1a 100644 --- a/iscsi-server/lang/de +++ b/iscsi-server/lang/de @@ -187,4 +187,4 @@ log_manual=Konfigurationsdatei manuell bearbeitet log_create_user=iSCSI-Benutzer $1 erstellt log_modify_user=iSCSI-Benutzer $1 aktualisiert log_delete_user=iSCSI-Benutzer $1 gelöscht -log_delete_users=$1 iSCSI-Benutzer gelöscht +log_delete_users=$1 iSCSI-Benutzer gelöscht \ No newline at end of file diff --git a/iscsi-target/lang/de b/iscsi-target/lang/de index 67e95cb7f..41ed4dc50 100644 --- a/iscsi-target/lang/de +++ b/iscsi-target/lang/de @@ -180,4 +180,4 @@ log_create_initiators=Erlaubte Clientadresse $1 erstellt log_delete_initiators=Erlaubte Clientadresse $1 gelöscht log_modify_initiators=Erlaubte Clientadresse $1 aktualisiert log_move_initiators=Erlaubte Clientadresse $1 verschoben -log_multidelete_initiators=Gelöscht: $1 erlaubte Clientadressen +log_multidelete_initiators=Gelöscht: $1 erlaubte Clientadressen \ No newline at end of file diff --git a/iscsi-tgtd/lang/de b/iscsi-tgtd/lang/de index 88c28b276..e1df3d635 100644 --- a/iscsi-tgtd/lang/de +++ b/iscsi-tgtd/lang/de @@ -101,4 +101,4 @@ manual_ok=Öffnen manual_desc=Verwenden Sie das Textfeld unten, um die Konfigurationsdatei des iSCSI-Servers $1 zu bearbeiten. Seien Sie vorsichtig, da keine Validierung Ihrer Eingaben durchgeführt wird! manual_err=Fehler beim Speichern der Konfigurationsdatei manual_edata=Keine Inhalte eingegeben! -manual_efile=Ungültige Konfigurationsdatei! +manual_efile=Ungültige Konfigurationsdatei! \ No newline at end of file diff --git a/itsecur-firewall/lang/af.auto b/itsecur-firewall/lang/af.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/af.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/ar.auto b/itsecur-firewall/lang/ar.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/ar.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/be.auto b/itsecur-firewall/lang/be.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/be.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/bg.auto b/itsecur-firewall/lang/bg.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/bg.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/ca.auto b/itsecur-firewall/lang/ca.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/ca.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/cs.auto b/itsecur-firewall/lang/cs.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/cs.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/da.auto b/itsecur-firewall/lang/da.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/da.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/de b/itsecur-firewall/lang/de index a8205d021..2d2e1562c 100644 --- a/itsecur-firewall/lang/de +++ b/itsecur-firewall/lang/de @@ -484,4 +484,4 @@ bandwidth_yes=Ja, auf Schnittstelle monitor_type=Einfache Firewall-Regel monitor_rule=Fehler, wenn Regel getroffen wird -monitor_num=Regel $1 ($2 -> $3) +monitor_num=Regel $1 ($2 -> $3) \ No newline at end of file diff --git a/itsecur-firewall/lang/el.auto b/itsecur-firewall/lang/el.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/el.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/es.auto b/itsecur-firewall/lang/es.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/es.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/eu.auto b/itsecur-firewall/lang/eu.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/eu.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/fa.auto b/itsecur-firewall/lang/fa.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/fa.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/fi.auto b/itsecur-firewall/lang/fi.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/fi.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/fr.auto b/itsecur-firewall/lang/fr.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/fr.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/he.auto b/itsecur-firewall/lang/he.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/he.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/hr.auto b/itsecur-firewall/lang/hr.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/hr.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/hu.auto b/itsecur-firewall/lang/hu.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/hu.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/it.auto b/itsecur-firewall/lang/it.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/it.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/ja.auto b/itsecur-firewall/lang/ja.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/ja.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/ko.auto b/itsecur-firewall/lang/ko.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/ko.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/lt.auto b/itsecur-firewall/lang/lt.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/lt.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/lv.auto b/itsecur-firewall/lang/lv.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/lv.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/ms.auto b/itsecur-firewall/lang/ms.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/ms.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/mt.auto b/itsecur-firewall/lang/mt.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/mt.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/nl.auto b/itsecur-firewall/lang/nl.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/nl.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/no.auto b/itsecur-firewall/lang/no.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/no.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/pl.auto b/itsecur-firewall/lang/pl.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/pl.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/pt.auto b/itsecur-firewall/lang/pt.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/pt.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/pt_BR.auto b/itsecur-firewall/lang/pt_BR.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/pt_BR.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/ro.auto b/itsecur-firewall/lang/ro.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/ro.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/ru.auto b/itsecur-firewall/lang/ru.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/ru.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/sk.auto b/itsecur-firewall/lang/sk.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/sk.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/sl.auto b/itsecur-firewall/lang/sl.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/sl.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/sv.auto b/itsecur-firewall/lang/sv.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/sv.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/th.auto b/itsecur-firewall/lang/th.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/th.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/tr.auto b/itsecur-firewall/lang/tr.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/tr.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/uk.auto b/itsecur-firewall/lang/uk.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/uk.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/ur.auto b/itsecur-firewall/lang/ur.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/ur.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/vi.auto b/itsecur-firewall/lang/vi.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/vi.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/zh.auto b/itsecur-firewall/lang/zh.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/zh.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/itsecur-firewall/lang/zh_TW.auto b/itsecur-firewall/lang/zh_TW.auto deleted file mode 100644 index 2eb09dbf1..000000000 --- a/itsecur-firewall/lang/zh_TW.auto +++ /dev/null @@ -1,487 +0,0 @@ -index_title=Simple Firewall Creator -index_version=Version $1 -index_iptables=Using iptables -index_ipf=Using ipf -index_apply=Apply Configuration -index_applydesc=Click this button to apply the current firewall configuration, using the firewall installed on your operating system. -index_bootup=Activate at boot -index_bootupdesc=Change this option to control whether your firewall is activated at boot time or not. -index_return=module index - -rules_title=Firewall Rules -rules_none=No firewall rules have been defined yet. All traffic will be allowed through untouched. -rules_add=Add a new firewall rule. -rules_sadd=Add a new section separator. -rules_return=rules list -rules_log=and log -rules_move=Move -rules_service=Services -rules_no=No. -rules_enable=Enable Selected -rules_disable=Disable Selected -rules_logon=Log Selected -rules_logoff=Don't Log Selected -rules_delete=Delete Selected -rules_desc=Comment - -rule_num=No. -rule_desc=Rule comment -rule_source=Source/Output Intf -rule_dest=Destination/Input Intf -rule_service=Destination services -rule_action=Action -rule_enabled=Enabled -rule_any=Any -rule_yes=$yes -rule_no=$no -rule_accept=Accept -rule_allow=Allow -rule_drop=Drop -rule_deny=Deny -rule_reject=Reject -rule_ignore=Ignore -rule_title1=Create Rule -rule_title2=Edit Rule -rule_title3=Insert Rule -rule_header=Firewall rule details -rule_anywhere=Any -rule_anywheresource=Any host or network -rule_anywheredest=Any host or network (except the firewall host) -rule_host=Host or network -rule_resolv=Resolve hostname to IP address -rule_named=named -rule_group=Host groups -rule_iface=Network interface -rule_oifc=Other.. -rule_anyserv=Any service -rule_oneserv=Only services .. -rule_log=Log as well? -rule_not=Must not match -rule_none=None -rule_err=Failed to save rule -rule_esource=Missing or invalid source hostname, IP address or network -rule_edest=Missing or invalid destination hostname, IP address or network -rule_before=Add Rule Before -rule_after=Add Rule After -rule_atpos=Position in list -rule_end=End of list -rule_pos=Before rule $1 ($2 -> $3) -rule_spos=Before separator ($1) -rule_ename=Invalid group name for host or network -rule_egroups=No groups selected -rule_eservices=No services selected -rule_time=Times -rule_anytime=Any -rule_seltime=During selected time -rule_rusured=Are you sure you want to delete this rule? -rule_rusures=Are you sure you want to modify this rule? -rule_goahead=Yes, Do It - -sep_title1=Create Section -sep_title2=Edit Section -sep_title3=Insert Section -sep_header=Firewall rule list section details -sep_desc=Section name -sep_err=Failed to save section -sep_edesc=Missing section name - -services_title=Services and Protocols -services_header1=User-defined services -services_header2=Standard services -services_add=Add a new service. -services_return=services list - -service_name=Name -service_ports=Protocols and ports -service_proto=Protocol -service_port=Port or port range -service_title1=Create Service -service_title2=Edit Service -service_header=User-defined service details -service_err=Failed to save service -service_ename=Missing service name -service_eport=Missing or invalid TCP or UDP port number, range (like 100-200) or list of ports in row $1 -service_eicmp=Missing or invalid ICMP type number in row $1 -service_eip=Missing or invalid IP protocol number in row $1 -service_enone=No protocols and ports entered -service_eclash=A service with the same name already exists -service_eprotos=All protocols must be the same -service_err2=Failed to delete service -service_einuse=This service is being used by a rule -service_einuse2=This service is a member of another service -service_members=Member services - -groups_title=Host and Network Groups -groups_add=Add a new host and network group. -groups_none=No host groups have been defined yet. -groups_return=groups list - -group_name=Group name -group_members=Member hosts / networks -group_members2=Member groups -group_title1=Create Group -group_title2=Edit Group -group_header=Host and network group details -group_err=Failed to save group -group_ename=Missing or invalid group name -group_eclash=A group with the same name already exists -group_emember='$1' is not a valid hostname, IP address or network -group_emembers=No group members entered -group_neg=Negate -group_err2=Failed to delete group -group_einuse=This group is in use by a rule -group_in_use_nat=This group is in use by a nat rule -group_in_use_group=This group is in use by the group -group_eself=A group cannot contain itself as a member -group_resolv=Resolve hostnames to IP addresses -group_eneg=Negation cannot be used with the network range $1 - -anywhere=Anywhere -anywhere_but=Anywhere except firewall -nowhere=Nowhere -not=Not $1 -iface=Interface $1 -iface_not=Not interface $1 - -nat_title=Network Address Translation -nat2_title=Failover NAT -nat_desc=NAT status -nat_nets=Networks to translate dynamically -nat_excl=Except for destinations -nat_disabled=Disabled -nat_enabled=Enabled, on external interface -nat_header=Current NAT settings -nat_err=Failed to save NAT settings -nat_eiface=Missing or invalid external interface -nat_maps=Static external to internal translations -nat_mapsdesc=If an external interface is selected,
a virtual interface will be added
to it for the external IP address
when the firewall is activated. -nat_ext=External IP address -nat_int=Internal IP address -nat_virt=External interface -nat_eext=The external name/group has more then 1 IP in row $1 -nat_eint=The internal name/group has more then 1 IP in row $1 - -logs_title=View Live Firewall Log -logs_viewing=Viewing the firewall log file $1 .. -logs_download=Download - -authlogs_title=View Live Security Log - -pat_title=Port Address Translation -pat_desc=PAT status -pat_disabled=Disabled -pat_enabled=Enabled, using external interface -pat_forward=External services to forward -pat_service=Service -pat_host=To internal host -pat_iface=External interface -pat_header=Current PAT settings -pat_err=Failed to save PAT settings -pat_ehost=Missing or invalid internal host in row $1 -pat_eiface=Missing or invalid external interface in row $1 - -spoof_title=Address Spoofing Prevention -spoof_desc=Prevention status -spoof_disabled=Disabled -spoof_enabled=Enabled, on external interface -spoof_nets=Internal networks -spoof_header=Current spoofing prevention settings -spoof_err=Failed to save address spoofing settings -spoof_enet='$1' is not a valid network address - must be like 192.168.1.0/24 -spoof_enets=No internal networks were entered - -syn_title=Syn Attack Prevention -syn_header=Current syn attack prevention setting -syn_flood=Block syn flood attacks? -syn_spoof=Block TCP connections that do not start with syn packet? -syn_fin=Block TCP packets with both syn and fin set? - -apply_title=Applying Configuration -apply_doing=Now applying firewall configuration .. -apply_done=.. done. Firewall rules are now active, and routing has been enabled. -apply_failed=.. failed : $1 -apply_return=previous page -apply_button=Apply Configuration -apply_ecannot=You are not allowed to apply the firewall configuration - -stop_title=Stopping Firewall -stop_doing=Disabling firewall .. -stop_done=.. done. All traffic will now be allowed, and but routing has been disabled. -stop_failed=.. failed : $1 - -backup_title=Backup Configuration -backup_header=Firewall settings backup options -backup_dest=Backup destination -backup_dest0=Download in browser -backup_dest1=Save to file on server -backup_dest3=Email to address -backup_dest2=FTP to server -backup_ftpfile=save as file -backup_ftpuser=Login as user -backup_ftppass=with password -backup_what=Objects to backup -backup_ok=Save and Backup Now -backup_save=Save Settings -backup_err=Failed to backup configuration -backup_edest=Missing or invalid backup destination file -backup_edestdir=Directory for destination file does not exist -backup_ewhat=Nothing selected to backup -backup_ewhat2=None of the selected objects are in use on this firewall -backup_done1=A backup of the firewall configuration has been successfully saved to $1. -backup_done2=A backup of the firewall configuration has been successfully uploaded to the FTP server $1 as $2. -backup_done3=A backup of the firewall configuration has been successfully emailed to $1. -backup_donesched=The schedule backup settings have been saved. -backup_pass=Password for backup file -backup_nopass=None -backup_epass=No password entered -backup_ezipcmd=The zip and unzip commands are needed for the backup and restore functions to work, but are not installed on your system. -backup_sched=Backup on schedule? -backup_nosched=No -backup_interval=Yes, on schedule -backup_eemail=Missing or invalid-looking email address -backup_eftphost=Missing or invalid FTP server -backup_eftpfile=Missing FTP filename -backup_eftpuser=Missing FTP login name - -restore_title=Restore Configuration -restore_header=Firewall settings restore options -restore_src=Backup source -restore_src1=Uploaded file -restore_src0=File on server -restore_what=Objects to restore -restore_ok=Restore Now -restore_err=Failed to restore configuration -restore_esrc=The source file on the server does not exist -restore_efile=No uploaded file was selected -restore_ewhat=Nothing selected to restore -restore_etar=The selected backup source file is not in a valid format -restore_cerr=The backup could not be restored, as the following consistency errors were detected in the restored configuration : -restore_enat=The group $1 used for Network Address Translation does not exist. -restore_epat=The service $1 used for Port Address Translation does not exist. -restore_eservice=The service $1 used in rule $2 does not exist. -restore_etime=The time range $1 used in rule $2 does not exist. -restore_egroup=The group $1 used in rule $2 does not exist. -restore_done=The firewall configuration has been successfully restored from the chosen backup file. -restore_pass=Password for backup file -restore_epass=Password is incorrect -restore_epass2=The backup is password protected, but no password was entered - -acl_features=Editable module features -acl_rfeatures=Viewable module features -acl_all=All -acl_sel=Selected below .. -ecannot=You are not allowed to use the $1 page -acl_apply=Apply Configuration -acl_bootup=Activate at boot time -acl_edit=Can edit firewall settings? - -users_desc=The users listed on this page have access to firewall module, with the selected privileges. -users_title=Firewall Users -users_add=Add a new firewall user. -users_name=Username -users_ips=Allowed IPs -users_enabled=Enabled? -users_allow=Only $1 -users_deny=All except $1 -users_all=All -users_edit=Can edit? -users_none=No users with access to only the firewall have been created yet. -users_return=user list - -user_title1=Create User -user_title2=Edit User -user_header=Firewall user details -user_name=Login name -user_pass=Password -user_same=Don't change -user_change=Set to -user_enabled=Login allowed? -user_err=Failed to save user -user_ename=Missing username -user_mods=Available Webmin modules - -bootup_ecannot=You are not allowed to enable or disable the firewall at boot time - -log_create_rule=Created rule for $1 to $2 -log_update_rule=Modified rule for $1 to $2 -log_delete_rule=Deleted rule for $1 to $2 -log_move_rule=Moved rule for $1 to $2 -log_create_service=Created service named $1 -log_update_service=Modified service named $1 -log_delete_service=Deleted service named $1 -log_create_group=Created host group named $1 -log_update_group=Modified host group named $1 -log_delete_group=Deleted host group named $1 -log_create_user=Created firewall user $1 -log_update_user=Modified firewall user $1 -log_delete_user=Deleted firewall user $1 -log_create_time=Created time range $1 -log_update_time=Modified time range $1 -log_delete_time=Deleted time range $1 -log_create_sep=Created separator $1 -log_update_sep=Modified separator $1 -log_delete_sep=Deleted separator $1 -log_update_nat=Updated NAT settings -log_update_pat=Updated PAT settings -log_update_spoof=Updated anti-spoofing settings -log_syn=Updated syn attack settings -log_apply=Applied Configuration -log_bootup=Enabled firewall at boot time -log_bootdown=Disabled firewall at boot time -log_backup=Backed up firewall to file $1 -log_backup_file=Backed up firewall to browser -log_restore=Restored firewall from file $1 -log_restore_file=Restored firewall from uploaded file -log_oldenable_rules=Enabled $1 rules and disabled $2 rules -log_enable_rules=Enabled $1 rules -log_disable_rules=Disabled $1 rules -log_logon_rules=Turned on logging for $1 rules -log_logoff_rules=Turned off logging for $1 rules -log_delete_rules=Deleted $1 rules -log_import_rules=Imported rules -log_import_services=Imported services -log_import_groups=Imported groups -log_import_times=Imported time ranges - -ipsec_title=FreeSWAN Configuration - -times_title=Time Ranges -times_name=Range name -times_hours=Hours of day -times_days=Days of week -times_all=All -times_add=Add a new time range. -times_none=No time ranges have been defined yet. -times_return=time ranges - -time_title1=Create Time Range -time_title2=Edit Time Range -time_name=Time range name -time_header=Time range details -time_hours=Hours of the day -time_allday=All day -time_from=From -time_to=to -time_days=Days of the week -time_allweek=All week -time_sel=Selected days .. -time_err=Failed to save time range -time_ename=Missing or invalid range name -time_eclash=A time range with the same name already exists -time_efrom=Missing or invalid starting time - must be in HH:MM format -time_eto=Missing or invalid ending time - must be in HH:MM format -time_ehourfrom=Invalid hour in start time -time_ehourto=Invalid hour in end time -time_eminfrom=Invalid minute in start time -time_eminto=Invalid minute in end time -time_edays=No days of the week selected -time_err2=Failed to delete time range -time_einuse=This time range is being used by a firewall rule - -remote_title=Remote Logging -remote_header=Remote firewall logging settings -remote_host=Send logs to remote host? -remote_port=on port -remote_to=Yes, to -remote_user=Login as user -remote_pass=Login with password -remote_err=Failed to save remote logging settings -remote_ehost=Missing or invalid hostname -remote_euser=Missing username -remote_econnect=Could not connect to host : $1 -remote_etimeout=Timed out - -import_title=Import Objects -import_header1=Rule import options -import_desc1=This form can be used to add firewall rules from a file in CSV format. The file must have the following columns:
Source The source IP address, hostname or network, or blank for any
Destination The destination IP address, hostname or network, or blank for any
Services The names of services to match, or blank for any
Action The action to take for matching packets. If the action is followed by log, then the rule will be logged too.
Comment An optional comment for this rule
Time An optional time range name that the rule applies in
-import_header2=Service import options -import_desc2=This form can be used to add services from a file in CSV format. The file must have the following columns:
Name Name of the service
Protocol A protocol like TCP or UDP
Port A port number
-import_header3=Group import options -import_desc3=This form can be used to add host groups from a file in CSV format. The file must have the following columns:
Name Name of the group
Member A member IP address, network or host. Multiple member columns can be specified.
-import_header4=Time range import options -import_desc4=This form can be used to add time ranges from a file in CSV format. The file must have the following columns:
Name Name of the range
Days Days of the week this range applies, or empty for all.
Times Starting and ending times separated by a -, or empty for all.
-import_src=CSV file source -import_ok=Import Now -import_err=Import failed -import_erow=Line $1 of the CSV file is invalid : $2 -import_esource=Invalid source address or network on line $1 : $2 -import_edest=Invalid destination address or network on line $1 : $2 -import_eservice=Unknown service on line $1 : $2 -import_etime=Unknown time range on line $1 : $2 -import_eaction=Unknown action on line $1 : $2 -import_eservname=Missing service name on line $1 -import_eservclash=Service name is already in use on line $1 : $2 -import_eproto=Missing or unknown protocol on line $1 : $2 -import_eport=Missing or invalid port number on line $1 : $2 -import_egroupname=Missing group name on line $1 -import_egroupclash=Group name is already in use on line $1 : $2 -import_ehost=Invalid host name on line $1 : $2 -import_etimename=Missing time name on line $1 -import_etimeclash=Time name is already in use on line $1 : $2 -import_etimeday=Invalid day of the week on line $1 : $2 -import_etimehour=Invalid time range line $1 : $2 -import_etimenone=No days or times specified on line $1 -import_done1=$1 firewall rules have been successfully imported. -import_done2=$1 services have been successfully imported. -import_done3=$1 groups have been successfully imported. -import_done4=$1 time ranges have been successfully imported. - -report_title=Search Log -report_pos=Log entries $1 to $2 of $3 -report_action=Action -report_date=Date -report_time=Time -report_src=Source -report_dst=Destination -report_dst_iface=Interface -report_proto=Protocol -report_src_port=Source port -report_dst_port=Dest port -report_first=Log time -report_last=Log time -report_rule=Rule no. -report_rule2=Rule -report_none=No matching firewall log entries were found. -report_none2=No firewall log entries have been recorded yet. -report_search=Find log entries where .. -report_reset=Show all entries -report_mode0=Ignored -report_mode1=Equals -report_mode2=Not equals -report_mode1first=After -report_mode1last=Before -report_welf=Export in WELF Format -report_welfdesc=Click this button to export all the matching firewall log entries in WELF format, for analysis using programs that support this format. -report_err=Failed to export logs -report_done=Successfully exported $1 log entries in WELF format to $2. -report_save=Save Search -report_savedesc=Enter a name below and click this button to save this search for later user. -report_savename=Search name -report_load=Load Search -report_loaddesc=Select a saved search below and click this button to display matching log entries. -report_esave=Missing or invalid name for saved search -report_usesaved=Use saved search -report_return=firewall log - -other=Other.. - -searches_title=Saved Searches -config_title=Module Configuration - -welf_title=WELF Export -welf_header=WELF log entries export -welf_dest=Send WELF file to -welf_err=Failed to export logs -welf_done1=Firewall logs in WELF format have been successfully saved to $1. -welf_done2=Firewall logs in WELF format have been successfully uploaded to the FTP server $1 as $2. -welf_done3=Firewall logs in WELF format have been successfully emailed to $1. -welf_ok=Export Now - -bandwidth_title=Bandwidth Monitoring -bandwidth_header=Setup bandwidth usage monitoring -bandwidth_enabled=Monitor network traffic for bandwidth reporting? -bandwidth_yes=Yes, on interface - -monitor_type=Simple Firewall Rule -monitor_rule=Fail when rule is hit -monitor_num=Rule $1 ($2 -> $3) diff --git a/jabber/lang/de b/jabber/lang/de index 1e0dd2251..655771468 100644 --- a/jabber/lang/de +++ b/jabber/lang/de @@ -117,4 +117,4 @@ filter_acts=Erlaubte Filteraktionen restart_err=Fehler beim Anwenden der Änderungen stop_err=Fehler beim Stoppen von Jabber stop_epid=Jabber-Prozess nicht gefunden -start_err=Fehler beim Starten von Jabber +start_err=Fehler beim Starten von Jabber \ No newline at end of file diff --git a/krb5/lang/de b/krb5/lang/de index ca3c812a3..c1f778d3b 100644 --- a/krb5/lang/de +++ b/krb5/lang/de @@ -14,4 +14,4 @@ default_kdc=KDC default_admin=Admin-Server default_domain=Standard-Domainname -save=Konfiguration aktualisieren +save=Konfiguration aktualisieren \ No newline at end of file diff --git a/lang/af.auto b/lang/af.auto index 80b932398..04fddda18 100644 --- a/lang/af.auto +++ b/lang/af.auto @@ -99,7 +99,6 @@ password_done=U wagwoord is suksesvol verander. U kan nou weer weer password_err=Kon nie wagwoord verander nie password_euser=U aanmeldnaam is nie in die wagwoordlêer gevind nie! password_eold=Die huidige wagwoord is verkeerd -password_euserpass=Invalid username or password password_enew1=Geen nuwe wagwoord is ingevoer nie password_enew2=U nuwe wagwoorde stem nie ooreen nie password_epam=PAM-fout : $1 diff --git a/lang/ar.auto b/lang/ar.auto index 95ca433d1..c12145470 100644 --- a/lang/ar.auto +++ b/lang/ar.auto @@ -8,8 +8,6 @@ config_emodule=وحدة غير موجودة help_efile3=فشلت قراءة صفحة التعليمات $1 من الوحدة النمطية$2 help_einclude3=فشل تضمين صفحة التعليمات$1 -password_euserpass=Invalid username or password - ui_of=ل log_email_by=$1 في$2 diff --git a/lang/be.auto b/lang/be.auto index 33355d463..418baa8a4 100644 --- a/lang/be.auto +++ b/lang/be.auto @@ -287,7 +287,6 @@ password_done=Ваш пароль быў паспяхова зменены. Ця password_err=Не атрымалася змяніць пароль password_euser=Ваша імя для ўваходу ў файл пароля не знойдзена! password_eold=Цяперашні пароль няправільны -password_euserpass=Invalid username or password password_enew1=Новы пароль не быў уведзены password_enew2=Вашы новыя паролі не супадаюць password_epam=Памылка PAM : $1 diff --git a/lang/bg.auto b/lang/bg.auto index 142201965..a41fd6bba 100644 --- a/lang/bg.auto +++ b/lang/bg.auto @@ -88,7 +88,6 @@ password_done=Паролата ви е била променена успешн password_err=Промяната на паролата не можа password_euser=Вашето име за вход не бе намерено във файла с паролата! password_eold=Текущата парола е неправилна -password_euserpass=Invalid username or password password_enew1=Не беше въведена нова парола password_enew2=Новите ви пароли не съвпадат password_epam=PAM грешка : $1 diff --git a/lang/ca.auto b/lang/ca.auto index 3e96c57be..5264c01b2 100644 --- a/lang/ca.auto +++ b/lang/ca.auto @@ -12,8 +12,6 @@ progress_size2=Baixant $1 ($2) .. progress_datan=S'ha rebut $1 ($2 %) progress_data2n=S'ha rebut $1 -password_euserpass=Invalid username or password - ui_of=de log_email_by=$1 per $2 diff --git a/lang/cs.auto b/lang/cs.auto index c2b901eff..3b2d32df2 100644 --- a/lang/cs.auto +++ b/lang/cs.auto @@ -10,8 +10,6 @@ config_emodule=Modul neexistuje help_efile3=Nepodařilo se přečíst stránku nápovědy $1 z modulu $2 help_einclude3=Nepodařilo se zahrnout stránku nápovědy $1 -password_euserpass=Invalid username or password - ui_of=z log_email_subject=Akce Webmin v $1 diff --git a/lang/da.auto b/lang/da.auto index 5f2cdd925..1a19d7107 100644 --- a/lang/da.auto +++ b/lang/da.auto @@ -8,8 +8,6 @@ config_emodule=Modulet findes ikke help_efile3=Kunne ikke læse hjælpesiden $1 fra modulet $2 help_einclude3=Kunne ikke inkludere hjælpeside $1 -password_euserpass=Invalid username or password - ui_of=af log_email_by=$1 til $2 diff --git a/lang/de.auto b/lang/de.auto deleted file mode 100644 index 68a764620..000000000 --- a/lang/de.auto +++ /dev/null @@ -1 +0,0 @@ -password_euserpass=Invalid username or password diff --git a/lang/el.auto b/lang/el.auto index 4a732b476..2f8f8afae 100644 --- a/lang/el.auto +++ b/lang/el.auto @@ -38,7 +38,6 @@ progress_datan=Λήψη $1 ($2 %) progress_data2n=Λήφθηκε $1 password_temp=Πρέπει να επιλέξετε έναν νέο κωδικό πρόσβασης για να αντικαταστήσετε την προσωρινή σύνδεσή σας. -password_euserpass=Invalid username or password password_enewpass=Ο νέος κωδικός πρόσβασης δεν επιτρέπεται : $1 ui_filterbox=Τύπος για φιλτράρισμα .. diff --git a/lang/es.auto b/lang/es.auto index 3fffa93e5..b8fed5282 100644 --- a/lang/es.auto +++ b/lang/es.auto @@ -8,8 +8,6 @@ help_einclude3=Error al incluir la página de ayuda $1 session_twofailed=La autenticación de dos factores falló : $1 -password_euserpass=Invalid username or password - ui_of=de log_email_by=$1 por $2 diff --git a/lang/eu.auto b/lang/eu.auto index a6e305009..a141ab71e 100644 --- a/lang/eu.auto +++ b/lang/eu.auto @@ -30,8 +30,6 @@ progress_size2=$1 deskargatzen ($2) .. progress_datan=$1 ($2 %) progress_data2n=$1 jaso da -password_euserpass=Invalid username or password - ui_searchfor=Testua dauka ui_filterbox=Idatzi iragazkia .. ui_of=de diff --git a/lang/fa.auto b/lang/fa.auto index efb926723..94d58e7c2 100644 --- a/lang/fa.auto +++ b/lang/fa.auto @@ -63,7 +63,6 @@ progress_data2n=Received $1 progress_incache=Found $1 in cache .. password_temp=برای جایگزینی ورود موقت خود باید یک رمزعبور جدید انتخاب کنید. -password_euserpass=Invalid username or password password_enewpass=New password is not allowed : $1 ui_filterbox=برای فیلتر کردن تایپ کنید .. diff --git a/lang/fi.auto b/lang/fi.auto index 6016df093..7bb09e6de 100644 --- a/lang/fi.auto +++ b/lang/fi.auto @@ -38,7 +38,6 @@ progress_datan=Vastaanotettu $1 ($2 %) progress_data2n=Vastaanotettu $1 password_temp=Sinun on valittava uusi salasana tilapäisen kirjautumisen korvaamiseksi. -password_euserpass=Invalid username or password password_enewpass=Uutta salasanaa ei sallita : $1 ui_filterbox=Kirjoita suodattaaksesi .. diff --git a/lang/fr.auto b/lang/fr.auto index bb813b929..c912a0fde 100644 --- a/lang/fr.auto +++ b/lang/fr.auto @@ -50,7 +50,6 @@ progress_data2n=$1 reçu progress_incache=$1 trouvé dans le cache .. password_temp=Vous devez sélectionner un nouveau mot de passe pour remplacer votre connexion temporaire. -password_euserpass=Invalid username or password password_enewpass=Le nouveau mot de passe n'est pas autorisé : $1 ui_filterbox=Tapez pour filtrer .. diff --git a/lang/he.auto b/lang/he.auto index b00119b3a..1264957c7 100644 --- a/lang/he.auto +++ b/lang/he.auto @@ -197,7 +197,6 @@ password_done=Your password has been successfully changed. You may now ismét bejelen password_err=Nem sikerült megváltoztatni a jelszót password_euser=A felhasználónév nem található a jelszó fájlban! password_eold=A jelenlegi jelszó helytelen -password_euserpass=Invalid username or password password_enew1=Nincs új jelszó megadva password_enew2=Az új jelszavak nem egyeznek password_epam=PAM hiba : $1 diff --git a/lang/it.auto b/lang/it.auto index 9ec3ebc68..ab65ddb7b 100644 --- a/lang/it.auto +++ b/lang/it.auto @@ -2,8 +2,6 @@ or=O help_efile3=Impossibile leggere la pagina della guida $1 dal modulo $2 help_einclude3=Impossibile includere la pagina della guida $1 -password_euserpass=Invalid username or password - ui_of=Di log_email_by=$1 per $2 diff --git a/lang/ja.auto b/lang/ja.auto index d056c3acf..916151b58 100644 --- a/lang/ja.auto +++ b/lang/ja.auto @@ -6,8 +6,6 @@ or=または help_efile3=モジュール $2 からヘルプ ページ $1 を読み取ることができませんでした help_einclude3=ヘルプ ページ $1 を含めることができませんでした -password_euserpass=Invalid username or password - ui_of=の log_email_by=$1 by $2 diff --git a/lang/ko.auto b/lang/ko.auto index 5c63b0222..6303f61ea 100644 --- a/lang/ko.auto +++ b/lang/ko.auto @@ -32,8 +32,6 @@ progress_size2=$1 ($2) 다운로드 중. .. progress_datan=$1 수신 ($2 %) progress_data2n=$1을 받았습니다. -password_euserpass=Invalid username or password - ui_filterbox=입력하여 필터링하십시오 .. ui_of=~의 diff --git a/lang/lt.auto b/lang/lt.auto index 4e75915b0..bc8668b86 100644 --- a/lang/lt.auto +++ b/lang/lt.auto @@ -97,7 +97,6 @@ password_done=Jūsų slaptažodis buvo sėkmingai pakeistas. Dabar galite vėl < password_err=Nepavyko pakeisti slaptažodžio password_euser=Slaptažodžio faile nerastas jūsų prisijungimo vardas! password_eold=Dabartinis slaptažodis neteisingas -password_euserpass=Invalid username or password password_enew1=Neįvestas naujas slaptažodis password_enew2=Nauji slaptažodžiai nesutampa password_epam=PAM klaida : $1 diff --git a/lang/lv.auto b/lang/lv.auto index 4bc0108d1..b3f1c9d87 100644 --- a/lang/lv.auto +++ b/lang/lv.auto @@ -287,7 +287,6 @@ password_done=Jūsu parole ir veiksmīgi nomainīta. Tagad jūs varat password_err=Falha ao alterar a senha password_euser=Seu nome de login não foi encontrado no arquivo de senhas! password_eold=A senha atual está incorreta -password_euserpass=Invalid username or password password_enew1=Nenhuma nova senha foi inserida password_enew2=Suas novas senhas não correspondem password_epam=Erro do PAM : $1 diff --git a/lang/ro.auto b/lang/ro.auto index 82f82cb4b..6a3f72ee1 100644 --- a/lang/ro.auto +++ b/lang/ro.auto @@ -44,7 +44,6 @@ progress_datan=Primite $1 ($2 %) progress_data2n=Primit $1 password_temp=Trebuie să selectați o nouă parolă pentru a înlocui autentificarea dvs. temporară. -password_euserpass=Invalid username or password password_enewpass=Parola nouă nu este permisă : $1 ui_filterbox=Tastați filtrul .. diff --git a/lang/ru.auto b/lang/ru.auto index 0d1eebf86..dea0f0507 100644 --- a/lang/ru.auto +++ b/lang/ru.auto @@ -32,7 +32,6 @@ readparse_cdheader=Отсутствует заголовок Content-Disposition readparse_enc=Ожидается кодирование данных формы, но получено нормальное кодирование password_temp=Вы должны выбрать новый пароль, чтобы заменить ваш временный логин. -password_euserpass=Invalid username or password password_epam=Ошибка PAM : $1 ui_filterbox=Тип для фильтрации .. diff --git a/lang/sk.auto b/lang/sk.auto index bbe9989d8..07dcb09e9 100644 --- a/lang/sk.auto +++ b/lang/sk.auto @@ -70,7 +70,6 @@ progress_data2n=Prijatý $1 progress_incache=Nájdený $1 v pamäti cache. password_temp=Ak chcete nahradiť dočasné prihlásenie, musíte vybrať nové heslo. -password_euserpass=Invalid username or password password_enewpass=Nové heslo nie je povolené : $1 ui_mandatory=Toto pole je povinné diff --git a/lang/sl.auto b/lang/sl.auto index e24a71391..fcf051e8c 100644 --- a/lang/sl.auto +++ b/lang/sl.auto @@ -287,7 +287,6 @@ password_done=Vaše geslo je bilo uspešno spremenjeno. Zdaj se lahko logga in igen< password_err=Det gick inte att ändra lösenordet password_euser=Ditt inloggningsnamn hittades inte i lösenordsfilen! password_eold=Det aktuella lösenordet är felaktigt -password_euserpass=Invalid username or password password_enew1=Inget nytt lösenord anges password_enew2=Dina nya lösenord matchar inte password_epam=PAM-fel : $1 diff --git a/lang/th.auto b/lang/th.auto index 933c31820..9c632de55 100644 --- a/lang/th.auto +++ b/lang/th.auto @@ -147,7 +147,6 @@ password_done=รหัสผ่านของคุณถูกเปลี่ password_err=ไม่สามารถเปลี่ยนรหัสผ่าน password_euser=ไม่พบชื่อเข้าสู่ระบบของคุณในไฟล์รหัสผ่าน! password_eold=รหัสผ่านปัจจุบันไม่ถูกต้อง -password_euserpass=Invalid username or password password_enew1=ไม่มีการป้อนรหัสผ่านใหม่ password_enew2=รหัสผ่านใหม่ของคุณไม่ตรงกัน password_epam=ข้อผิดพลาดของ PAM : $1 diff --git a/lang/tr.auto b/lang/tr.auto index 89cb401d9..f256596bf 100644 --- a/lang/tr.auto +++ b/lang/tr.auto @@ -179,7 +179,6 @@ password_done=Parolanız başarıyla değiştirildi. Artık yeni şifreyle $1 slapd_root2=SHA1 криптиран $1 slapd_root3=Криптиран $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Няма зададена парола slapd_rootchange=Нова административна парола slapd_leave=Не се променяйте @@ -84,13 +83,11 @@ schema_title=Управление на схема schema_file=име schema_desc=описание schema_pagedesc=LDAP схемата определя кои класове и атрибути на обекти могат да се съхраняват във вашата база данни LDAP. Тази страница ви позволява да изберете кои типове схеми се поддържат от вашия сървър, но внимавайте да премахвате всички записи, които се използват от съществуващите обекти. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Неуспешно запазване на схемата schema_move=Ход schema_act=Действия .. schema_view=изглед schema_edit=редактиране -schema_import=Import schema_edir=Файла не е в директорията на схемата! schema_etitle=Редактиране на файла на схемата schema_eheader=Съдържание на файла на схемата @@ -216,7 +213,6 @@ apply_ecannot=Нямате право да прилагате конфигура stop_err=Спирането на LDAP сървъра не бе успешно stop_ecmd=$1 не успя : $2 stop_egone=Вече не тича! -stop_egone2=Running but PID is unknown! stop_ekill=Процесът на убиване не бе успешен : $1 stop_ecannot=Нямате право да спирате LDAP сървъра @@ -330,12 +326,3 @@ eacl_ewho=Липсващо или невалидно изглеждащо DN в eacl_eaccess=Липсва или невалидно ниво на достъп в ред $1 eacl_order=Правило ред eacl_noorder=Няма зададен - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/ca.auto b/ldap-server/lang/ca.auto deleted file mode 100644 index 49f35bce1..000000000 --- a/ldap-server/lang/ca.auto +++ /dev/null @@ -1,15 +0,0 @@ -slapd_root4=SSHA encrypted $1 - -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. -schema_import=Import - -stop_egone2=Running but PID is unknown! - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/cs.auto b/ldap-server/lang/cs.auto index ae6a0ed4e..7eef0302e 100644 --- a/ldap-server/lang/cs.auto +++ b/ldap-server/lang/cs.auto @@ -39,7 +39,6 @@ slapd_rootpw=Heslo pro správu slapd_root1=Unix šifrován $1 slapd_root2=SHA1 šifrován $1 slapd_root3=Šifrováno $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Nebylo nastaveno žádné heslo slapd_rootchange=Nové heslo pro správu slapd_leave=Neměňte @@ -84,13 +83,11 @@ schema_title=Spravovat schéma schema_file=název schema_desc=Popis schema_pagedesc=Schéma LDAP určuje, které třídy objektů a atributy mohou být uloženy v databázi LDAP. Tato stránka umožňuje vybrat, které typy schémat váš server podporuje - ale opatrně zrušte výběr všech položek, které používají existující objekty. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Schéma se nepodařilo uložit schema_move=Hýbat se schema_act=Akce .. schema_view=Pohled schema_edit=Upravit -schema_import=Import schema_edir=Soubor není v adresáři schématu! schema_etitle=Upravit soubor schématu schema_eheader=Obsah souboru schématu @@ -216,7 +213,6 @@ apply_ecannot=Nemáte povolení použít konfiguraci stop_err=Zastavení serveru LDAP se nezdařilo stop_ecmd=$1 selhalo : $2 stop_egone=Už neběží! -stop_egone2=Running but PID is unknown! stop_ekill=Proces zabití selhal : $1 stop_ecannot=Není dovoleno zastavit server LDAP @@ -330,12 +326,3 @@ eacl_ewho=Chybějící nebo neplatné hledající DN v řádku $1 eacl_eaccess=Chybějící nebo neplatná úroveň přístupu v řádku $1 eacl_order=Pořadí pravidel eacl_noorder=Žádná sada - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/da.auto b/ldap-server/lang/da.auto index 94367c6b5..30b0bd2e4 100644 --- a/ldap-server/lang/da.auto +++ b/ldap-server/lang/da.auto @@ -39,7 +39,6 @@ slapd_rootpw=Administrationsadgangskode slapd_root1=Unix krypteret $1 slapd_root2=SHA1 krypteret $1 slapd_root3=Krypteret $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Intet adgangskode er indstillet slapd_rootchange=Ny administrationsadgangskode slapd_leave=Skift ikke @@ -84,13 +83,11 @@ schema_title=Administrer skema schema_file=Navn schema_desc=Beskrivelse schema_pagedesc=LDAP-skemaet bestemmer, hvilke objektklasser og attributter, der kan gemmes i din LDAP-database. Denne side giver dig mulighed for at vælge hvilke skematyper, der understøttes af din server - men vær forsigtig med at fjerne de poster, der bruges af eksisterende objekter. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Kunne ikke gemme skemaet schema_move=Bevæge sig schema_act=Handlinger .. schema_view=Udsigt schema_edit=Redigere -schema_import=Import schema_edir=Filen er ikke i skemaoversigten! schema_etitle=Rediger skemafil schema_eheader=Skemafilindhold @@ -216,7 +213,6 @@ apply_ecannot=Du har ikke tilladelse til at anvende konfigurationen stop_err=Kunne ikke stoppe LDAP-serveren stop_ecmd=$1 mislykkedes : $2 stop_egone=Kører ikke længere! -stop_egone2=Running but PID is unknown! stop_ekill=Dræbsprocessen mislykkedes : $1 stop_ecannot=Du har ikke tilladelse til at stoppe LDAP-serveren @@ -330,12 +326,3 @@ eacl_ewho=DN mangler eller er ugyldigt i række $1 eacl_eaccess=Manglende eller ugyldigt adgangsniveau i række $1 eacl_order=Regelordre eacl_noorder=Intet sæt - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/de b/ldap-server/lang/de index 1d1055b55..cf0aedabe 100644 --- a/ldap-server/lang/de +++ b/ldap-server/lang/de @@ -338,4 +338,4 @@ import_eldif=LDIF-Datei $1 existiert nicht import_title=Schema importieren import_doing=Importiere LDIF-Schema-Datei $1 .. import_failed=.. Import fehlgeschlagen! -import_ok=.. Import erfolgreich abgeschlossen +import_ok=.. Import erfolgreich abgeschlossen \ No newline at end of file diff --git a/ldap-server/lang/el.auto b/ldap-server/lang/el.auto index 5528a69fc..e18f7e553 100644 --- a/ldap-server/lang/el.auto +++ b/ldap-server/lang/el.auto @@ -39,7 +39,6 @@ slapd_rootpw=Κωδικός πρόσβασης διαχειριστή slapd_root1=Unix κρυπτογραφημένο $1 slapd_root2=SHA1 κρυπτογραφημένο $1 slapd_root3=Κρυπτογραφημένο $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Δεν έχει οριστεί κωδικός πρόσβασης slapd_rootchange=Νέος κωδικός πρόσβασης διαχείρισης slapd_leave=Μην αλλάζετε @@ -84,13 +83,11 @@ schema_title=Διαχείριση σχήματος schema_file=Ονομα schema_desc=Περιγραφή schema_pagedesc=Το σχήμα LDAP καθορίζει ποιες κλάσεις και ιδιότητες αντικειμένων μπορούν να αποθηκευτούν στη βάση δεδομένων LDAP. Αυτή η σελίδα σάς επιτρέπει να επιλέξετε ποιοι τύποι σχήματος υποστηρίζονται από τον διακομιστή σας - αλλά αποφύγετε την επιλογή των καταχωρήσεων που χρησιμοποιούνται από υπάρχοντα αντικείμενα. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Αποτυχία αποθήκευσης σχήματος schema_move=Κίνηση schema_act=Ενέργειες .. schema_view=Θέα schema_edit=Επεξεργασία -schema_import=Import schema_edir=Το αρχείο δεν βρίσκεται στον κατάλογο σχημάτων! schema_etitle=Επεξεργασία αρχείου σχήματος schema_eheader=Περιεχόμενα αρχείου σχήματος @@ -216,7 +213,6 @@ apply_ecannot=Δεν επιτρέπεται να εφαρμόσετε τη δι stop_err=Αποτυχία διακοπής του διακομιστή LDAP stop_ecmd=$1 απέτυχε : $2 stop_egone=Δεν τρέχει πλέον! -stop_egone2=Running but PID is unknown! stop_ekill=Η διαδικασία θανάτου απέτυχε : $1 stop_ecannot=Δεν επιτρέπεται η διακοπή του διακομιστή LDAP @@ -330,12 +326,3 @@ eacl_ewho=Έλλειψη ή μη έγκυρο DN στη γραμμή $1 eacl_eaccess=Λείπει ή μη έγκυρο επίπεδο πρόσβασης στη γραμμή $1 eacl_order=Διαταγή κανόνων eacl_noorder=Δεν έχει οριστεί - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/es.auto b/ldap-server/lang/es.auto index e1fdcaa16..47ad2d257 100644 --- a/ldap-server/lang/es.auto +++ b/ldap-server/lang/es.auto @@ -39,7 +39,6 @@ slapd_rootpw=Contraseña de administración slapd_root1=Unix cifrado $1 slapd_root2=SHA1 cifrado $1 slapd_root3=$1 cifrado -slapd_root4=SSHA encrypted $1 slapd_noroot=Sin contraseña establecida slapd_rootchange=Nueva contraseña de administración slapd_leave=No cambies @@ -84,13 +83,11 @@ schema_title=Gestionar esquema schema_file=Nombre schema_desc=Descripción schema_pagedesc=El esquema LDAP determina qué clases de objetos y atributos se pueden almacenar en su base de datos LDAP. Esta página le permite seleccionar qué tipos de esquema son compatibles con su servidor, pero tenga cuidado de anular la selección de las entradas que utilizan los objetos existentes. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Error al guardar el esquema schema_move=Moverse schema_act=Comportamiento .. schema_view=Ver schema_edit=Editar -schema_import=Import schema_edir=¡El archivo no está en el directorio de esquema! schema_etitle=Editar archivo de esquema schema_eheader=Contenido del archivo de esquema @@ -216,7 +213,6 @@ apply_ecannot=No tiene permitido aplicar la configuración stop_err=Error al detener el servidor LDAP stop_ecmd=$1 falló : $2 stop_egone=¡Ya no corre! -stop_egone2=Running but PID is unknown! stop_ekill=Proceso de eliminación fallido : $1 stop_ecannot=No tiene permiso para detener el servidor LDAP @@ -330,12 +326,3 @@ eacl_ewho=DN faltante o de aspecto no válido en la fila $1 eacl_eaccess=Nivel de acceso faltante o no válido en la fila $1 eacl_order=Orden de la regla eacl_noorder=Ninguno establecido - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/eu.auto b/ldap-server/lang/eu.auto index da387e99e..58e7fd97c 100644 --- a/ldap-server/lang/eu.auto +++ b/ldap-server/lang/eu.auto @@ -39,7 +39,6 @@ slapd_rootpw=Administrazioko pasahitza slapd_root1=Unix enkriptatutako $1 slapd_root2=SHA1 enkriptatutako $1 slapd_root3=Zifratutako $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Ez dago pasahitzik slapd_rootchange=Administrazioko pasahitz berria slapd_leave=Ez aldatu @@ -84,13 +83,11 @@ schema_title=Kudeatu eskema schema_file=izena schema_desc=deskribapena schema_pagedesc=LDAP eskemak zehazten du zein objektu klase eta atributu gorde daitezkeen zure LDAP datu-basean. Orrialde honek zure zerbitzarian onartzen diren eskema motak hautatzeko aukera ematen du - baina kontuz ibili lehendik dauden objektuek erabiltzen dituzten sarrerak hautatzen. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Ezin izan da eskema gorde schema_move=Mugitu schema_act=Ekintzak .. schema_view=ikusi schema_edit=Editatu -schema_import=Import schema_edir=Fitxategia ez dago eskemaren direktorioan! schema_etitle=Editatu eskemaren fitxategia schema_eheader=Eskemaren fitxategiaren edukia @@ -216,7 +213,6 @@ apply_ecannot=Ezin duzu konfigurazioa aplikatu stop_err=Ezin izan da LDAP zerbitzaria gelditu stop_ecmd=$1 huts egin da : $2 stop_egone=Jada ez korrika! -stop_egone2=Running but PID is unknown! stop_ekill=Hiltze prozesua huts egin da : $1 stop_ecannot=Ezin duzu LDAP zerbitzaria gelditu @@ -330,12 +326,3 @@ eacl_ewho=$1 errenkadan DN falta edo baliogabea eacl_eaccess=Sarbide maila falta edo baliogabea da $1 errenkadan eacl_order=Arauen ordena eacl_noorder=Ez da batere ezarri - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/fa.auto b/ldap-server/lang/fa.auto index 7641d4a22..52205bdb9 100644 --- a/ldap-server/lang/fa.auto +++ b/ldap-server/lang/fa.auto @@ -39,7 +39,6 @@ slapd_rootpw=رمز عبور مدیریت slapd_root1=یونیکس رمزگذاری شده $1 slapd_root2=SHA1 رمزگذاری شده $1 slapd_root3=رمزگذاری شده $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=بدون رمز عبور تنظیم شده است slapd_rootchange=رمز عبور جدید slapd_leave=تغییر نکن @@ -84,13 +83,11 @@ schema_title=مدیریت طرحواره schema_file=نام schema_desc=شرح schema_pagedesc=طرح LDAP تعیین می کند که کلاس ها و خصوصیات شیء در پایگاه داده LDAP شما ذخیره می شود. این صفحه به شما امکان می دهد نوع های طرح را توسط سرور خود پشتیبانی کنید - اما مراقب باشید که هر ورودی را که توسط اشیاء موجود استفاده می شود ، انتخاب کنید. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=ذخیره طرحواره انجام نشد schema_move=حرکت schema_act=اقدامات .. schema_view=چشم انداز schema_edit=ویرایش کنید -schema_import=Import schema_edir=پرونده در فهرست طرحواره نیست! schema_etitle=پرونده طرحواره ویرایش کنید schema_eheader=محتوای پرونده طرحواره @@ -216,7 +213,6 @@ apply_ecannot=شما مجاز به اعمال پیکربندی نیستید stop_err=سرور LDAP متوقف نشد stop_ecmd=$1 شکست خورد :$2 stop_egone=دیگر در حال اجرا نیست! -stop_egone2=Running but PID is unknown! stop_ekill=روند کشتن انجام نشد :$1 stop_ecannot=شما مجاز به متوقف کردن سرور LDAP نیستید @@ -330,12 +326,3 @@ eacl_ewho=DN در ردیف$1 نامشخص یا نامعتبر است eacl_eaccess=سطح دسترسی از دست رفته یا نامعتبر در ردیف$1 نیست eacl_order=نظم قانون eacl_noorder=هیچ مجموعه ای نیست - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/fi.auto b/ldap-server/lang/fi.auto index 37325416c..edb12d391 100644 --- a/ldap-server/lang/fi.auto +++ b/ldap-server/lang/fi.auto @@ -39,7 +39,6 @@ slapd_rootpw=Hallinnon salasana slapd_root1=Unix salattu $1 slapd_root2=SHA1 salattu $1 slapd_root3=Salattu $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Ei salasanaa asetettu slapd_rootchange=Uusi järjestelmänvalvojan salasana slapd_leave=Älä muuta @@ -84,13 +83,11 @@ schema_title=Hallitse kaavaa schema_file=Nimi schema_desc=Kuvaus schema_pagedesc=LDAP-skeema määrittelee, mitkä objektiluokat ja määritteet voidaan tallentaa LDAP-tietokantaan. Tällä sivulla voit valita, minkä tyyppisiä palvelintyyppejä palvelimesi tukee, mutta ole varovainen poistamalla kaikki olemassa olevien objektien käyttämät merkinnät. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Kaavion tallentaminen epäonnistui schema_move=Liikkua schema_act=Toiminnot .. schema_view=näkymä schema_edit=Muokata -schema_import=Import schema_edir=Tiedostoa ei ole skeemahakemistossa! schema_etitle=Muokkaa kaavotiedostoa schema_eheader=Schema-tiedoston sisältö @@ -216,7 +213,6 @@ apply_ecannot=Et voi käyttää kokoonpanoa stop_err=LDAP-palvelimen pysäyttäminen epäonnistui stop_ecmd=$1 epäonnistui : $2 stop_egone=Ei enää juokse! -stop_egone2=Running but PID is unknown! stop_ekill=Tappoprosessi epäonnistui : $1 stop_ecannot=Et voi pysäyttää LDAP-palvelinta @@ -330,12 +326,3 @@ eacl_ewho=Puuttuva tai virheellisen näköinen DN rivillä $1 eacl_eaccess=Puuttuva tai virheellinen käyttöoikeustaso rivillä $1 eacl_order=Sääntöjärjestys eacl_noorder=Ei asetettu - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/fr.auto b/ldap-server/lang/fr.auto index 19d5be0f0..8cb2d91c9 100644 --- a/ldap-server/lang/fr.auto +++ b/ldap-server/lang/fr.auto @@ -39,7 +39,6 @@ slapd_rootpw=Mot de passe d'administration slapd_root1=$1 crypté sous Unix slapd_root2=SHA1 chiffré $1 slapd_root3=$1 crypté -slapd_root4=SSHA encrypted $1 slapd_noroot=Aucun mot de passe défini slapd_rootchange=Nouveau mot de passe d'administration slapd_leave=Ne change pas @@ -84,13 +83,11 @@ schema_title=Gérer le schéma schema_file=Nom schema_desc=La description schema_pagedesc=Le schéma LDAP détermine quelles classes d'objets et quels attributs peuvent être stockés dans votre base de données LDAP. Cette page vous permet de sélectionner les types de schéma pris en charge par votre serveur, mais veillez à désélectionner toutes les entrées utilisées par les objets existants. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Échec de l'enregistrement du schéma schema_move=Bouge toi schema_act=Actions .. schema_view=Vue schema_edit=Éditer -schema_import=Import schema_edir=Le fichier n'est pas dans le répertoire du schéma! schema_etitle=Modifier le fichier de schéma schema_eheader=Contenu du fichier de schéma @@ -216,7 +213,6 @@ apply_ecannot=Vous n'êtes pas autorisé à appliquer la configuration stop_err=Impossible d'arrêter le serveur LDAP stop_ecmd=$1 a échoué : $2 stop_egone=Ne fonctionne plus! -stop_egone2=Running but PID is unknown! stop_ekill=Échec du processus de suppression : $1 stop_ecannot=Vous n'êtes pas autorisé à arrêter le serveur LDAP @@ -330,12 +326,3 @@ eacl_ewho=DN manquant ou non valide dans la ligne $1 eacl_eaccess=Niveau d'accès manquant ou non valide dans la ligne $1 eacl_order=Ordre des règles eacl_noorder=Aucun ensemble - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/he.auto b/ldap-server/lang/he.auto index 184973875..bf1d28cb1 100644 --- a/ldap-server/lang/he.auto +++ b/ldap-server/lang/he.auto @@ -39,7 +39,6 @@ slapd_rootpw=סיסמת ניהול slapd_root1=יוניקס מוצפן $1 slapd_root2=SHA1 מוצפן $1 slapd_root3=מוצפן $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=לא הוגדרה סיסמה slapd_rootchange=סיסמת ניהול חדשה slapd_leave=אל תשתנה @@ -84,13 +83,11 @@ schema_title=נהל סכמה schema_file=שם schema_desc=תיאור schema_pagedesc=סכמת LDAP קובעת אילו מחלקות ותכונות של אובייקטים ניתן לאחסן במסד הנתונים של LDAP. דף זה מאפשר לך לבחור אילו סוגי סכימות נתמכים על ידי השרת שלך - אך הקפד לבחור את כל הערכים המשמשים את האובייקטים הקיימים. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=שמירת הסכימה נכשלה schema_move=מהלך \ לזוז \ לעבור schema_act=פעולות .. schema_view=נוף schema_edit=ערוך -schema_import=Import schema_edir=הקובץ אינו נמצא בספריית הסכימה! schema_etitle=ערוך את קובץ הסכימה schema_eheader=תוכן קובץ הסכימה @@ -216,7 +213,6 @@ apply_ecannot=אינך מורשה להחיל את התצורה stop_err=עצירת שרת LDAP נכשלה stop_ecmd=$1 נכשל : $2 stop_egone=כבר לא רץ! -stop_egone2=Running but PID is unknown! stop_ekill=תהליך ההרג נכשל : $1 stop_ecannot=אינך רשאי לעצור את שרת LDAP @@ -330,12 +326,3 @@ eacl_ewho=DN חסר או לא חוקי למראה בשורה $1 eacl_eaccess=רמת גישה חסרה או לא חוקית בשורה $1 eacl_order=סדר שלטון eacl_noorder=אין סטים - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/hr.auto b/ldap-server/lang/hr.auto index 2e07ea1d1..f8b607a8a 100644 --- a/ldap-server/lang/hr.auto +++ b/ldap-server/lang/hr.auto @@ -39,7 +39,6 @@ slapd_rootpw=Lozinka administracije slapd_root1=Unix kodiran $1 slapd_root2=SHA1 šifrirano $1 slapd_root3=Šifrirano $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Nije postavljena lozinka slapd_rootchange=Nova lozinka za administraciju slapd_leave=Ne mijenjajte se @@ -84,13 +83,11 @@ schema_title=Upravljajte shemom schema_file=Ime schema_desc=Opis schema_pagedesc=LDAP shema određuje koje se klase objekata i atributi mogu pohraniti u vašu LDAP bazu podataka. Ova stranica omogućuje vam odabir vrsta shema koje podržava vaš poslužitelj - ali budite pažljivi da odaberete bilo koje unose koje koriste postojeći objekti. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Spremanje sheme nije uspjelo schema_move=Pomicati schema_act=Akcije .. schema_view=Pogled schema_edit=Uredi -schema_import=Import schema_edir=Datoteka nije u direktoriju sheme! schema_etitle=Uredi datoteku sheme schema_eheader=Sadržaj datoteke sheme @@ -216,7 +213,6 @@ apply_ecannot=Nije vam dopušteno primijeniti konfiguraciju stop_err=Zaustavljanje LDAP poslužitelja nije uspjelo stop_ecmd=$1 nije uspio : $2 stop_egone=Nema više trčanja! -stop_egone2=Running but PID is unknown! stop_ekill=Proces ubijanja nije uspio : $1 stop_ecannot=Zabranjeno vam je zaustavljanje LDAP poslužitelja @@ -330,12 +326,3 @@ eacl_ewho=Nedostaje ili je nevaljan DN u redu $1 eacl_eaccess=Nedostaje ili nije važeća razina pristupa u retku $1 eacl_order=Redoslijed pravila eacl_noorder=Nijedan nije postavljen - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/hu.auto b/ldap-server/lang/hu.auto index 5de35fb5b..b0322ff68 100644 --- a/ldap-server/lang/hu.auto +++ b/ldap-server/lang/hu.auto @@ -39,7 +39,6 @@ slapd_rootpw=Adminisztráció jelszava slapd_root1=Unix titkosítva $1 slapd_root2=Az SHA1 titkosítva $1 slapd_root3=Titkosítva $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Nincs beállítva jelszó slapd_rootchange=Új adminisztrációs jelszó slapd_leave=Ne változtasson @@ -84,13 +83,11 @@ schema_title=Séma kezelése schema_file=Név schema_desc=Leírás schema_pagedesc=Az LDAP séma meghatározza, mely objektumosztályokat és attribútumokat lehet tárolni az LDAP adatbázisban. Ezen az oldalon kiválaszthatja, hogy mely séma-típusokat támogatja a szerver, de vigyázzon arra, hogy törölje a meglévő objektumok által használt bejegyzéseket. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Nem sikerült a séma mentése schema_move=Mozog schema_act=Hozzászólások .. schema_view=Kilátás schema_edit=szerkesztése -schema_import=Import schema_edir=A fájl nincs a séma könyvtárban! schema_etitle=Sémafájl szerkesztése schema_eheader=Séma fájl tartalma @@ -216,7 +213,6 @@ apply_ecannot=A konfiguráció alkalmazása nem engedélyezett stop_err=Az LDAP szerver megállítása nem sikerült stop_ecmd=$1 sikertelen : $2 stop_egone=Már nem fut! -stop_egone2=Running but PID is unknown! stop_ekill=A gyilkos folyamat sikertelen : $1 stop_ecannot=Nem szabad megállítani az LDAP szervert @@ -330,12 +326,3 @@ eacl_ewho=Hiányzó vagy érvénytelen kinézetű DN a $1 sorban eacl_eaccess=Hiányzó vagy érvénytelen hozzáférési szint a (z) $1 sorban eacl_order=Szabályrend eacl_noorder=Nincs beállítva - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/it.auto b/ldap-server/lang/it.auto index 678899b31..ed22604d9 100644 --- a/ldap-server/lang/it.auto +++ b/ldap-server/lang/it.auto @@ -39,7 +39,6 @@ slapd_rootpw=Password di amministrazione slapd_root1=Unix crittografato $1 slapd_root2=SHA1 crittografato $1 slapd_root3=$1 crittografato -slapd_root4=SSHA encrypted $1 slapd_noroot=Nessuna password impostata slapd_rootchange=Nuova password di amministrazione slapd_leave=Non cambiare @@ -84,13 +83,11 @@ schema_title=Gestisci schema schema_file=Nome schema_desc=Descrizione schema_pagedesc=Lo schema LDAP determina quali classi e attributi di oggetto possono essere memorizzati nel database LDAP. Questa pagina ti consente di selezionare quali tipi di schemi sono supportati dal tuo server, ma fai attenzione a deselezionare tutte le voci utilizzate da oggetti esistenti. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Impossibile salvare lo schema schema_move=Mossa schema_act=Azioni .. schema_view=Visualizza schema_edit=modificare -schema_import=Import schema_edir=Il file non si trova nella directory dello schema! schema_etitle=Modifica file schema schema_eheader=Contenuto del file di schema @@ -216,7 +213,6 @@ apply_ecannot=Non è consentito applicare la configurazione stop_err=Impossibile arrestare il server LDAP stop_ecmd=$1 non riuscito : $2 stop_egone=Non più in esecuzione! -stop_egone2=Running but PID is unknown! stop_ekill=Processo di uccisione fallito : $1 stop_ecannot=Non è consentito arrestare il server LDAP @@ -330,12 +326,3 @@ eacl_ewho=DN mancante o non valido nella riga $1 eacl_eaccess=Livello di accesso mancante o non valido nella riga $1 eacl_order=Ordine delle regole eacl_noorder=Nessuno impostato - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/ja.auto b/ldap-server/lang/ja.auto index 32b2a3cd5..5f16be233 100644 --- a/ldap-server/lang/ja.auto +++ b/ldap-server/lang/ja.auto @@ -39,7 +39,6 @@ slapd_rootpw=管理パスワード slapd_root1=Unix暗号化$1 slapd_root2=SHA1暗号化$1 slapd_root3=暗号化された$1 -slapd_root4=SSHA encrypted $1 slapd_noroot=パスワードが設定されていません slapd_rootchange=新しい管理パスワード slapd_leave=変更しないでください @@ -84,13 +83,11 @@ schema_title=スキーマを管理する schema_file=名前 schema_desc=説明 schema_pagedesc=LDAPスキーマは、LDAPデータベースに保存できるオブジェクトクラスと属性を決定します。このページでは、サーバーでサポートされているスキーマタイプを選択できますが、既存のオブジェクトで使用されているエントリの選択を慎重に解除してください。 -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=スキーマを保存できませんでした schema_move=移動する schema_act=行動 .. schema_view=見る schema_edit=編集 -schema_import=Import schema_edir=ファイルがスキーマディレクトリにありません！ schema_etitle=スキーマファイルの編集 schema_eheader=スキーマファイルの内容 @@ -216,7 +213,6 @@ apply_ecannot=構成を適用することはできません stop_err=LDAPサーバーを停止できませんでした stop_ecmd=$1が失敗しました： $2 stop_egone=もう走っていない！ -stop_egone2=Running but PID is unknown! stop_ekill=プロセスの強制終了に失敗しました： $1 stop_ecannot=LDAPサーバーを停止することはできません @@ -330,12 +326,3 @@ eacl_ewho=行 $1のDNが見つからないか無効です eacl_eaccess=行 $1のアクセスレベルがないか、無効です eacl_order=ルールの順序 eacl_noorder=設定なし - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/ko.auto b/ldap-server/lang/ko.auto index b485cf9f8..2c831be2c 100644 --- a/ldap-server/lang/ko.auto +++ b/ldap-server/lang/ko.auto @@ -39,7 +39,6 @@ slapd_rootpw=관리 비밀번호 slapd_root1=유닉스 암호화 $1 slapd_root2=SHA1 암호화 $1 slapd_root3=암호화 된 $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=비밀번호가 설정되지 않았습니다 slapd_rootchange=새로운 관리 비밀번호 slapd_leave=변경하지 마십시오 @@ -84,13 +83,11 @@ schema_title=스키마 관리 schema_file=이름 schema_desc=기술 schema_pagedesc=LDAP 스키마는 LDAP 데이터베이스에 저장할 수있는 객체 클래스 및 속성을 결정합니다. 이 페이지에서는 서버에서 지원하는 스키마 유형을 선택할 수 있지만 기존 객체에서 사용하는 항목은 신중하게 선택 해제해야합니다. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=스키마를 저장하지 못했습니다 schema_move=움직임 schema_act=행위 .. schema_view=전망 schema_edit=편집하다 -schema_import=Import schema_edir=파일이 스키마 디렉토리에 없습니다! schema_etitle=스키마 파일 편집 schema_eheader=스키마 파일 내용 @@ -216,7 +213,6 @@ apply_ecannot=구성을 적용 할 수 없습니다 stop_err=LDAP 서버를 중지하지 못했습니다 stop_ecmd=$1 실패 : $2 stop_egone=더 이상 달리지 않습니다! -stop_egone2=Running but PID is unknown! stop_ekill=강제 종료 프로세스 : $1 stop_ecannot=LDAP 서버를 중지 할 수 없습니다 @@ -330,12 +326,3 @@ eacl_ewho=$1 행에 누락되었거나 잘못된 모양의 DN eacl_eaccess=$1 행에 없거나 액세스 수준이 잘못되었습니다 eacl_order=규칙 순서 eacl_noorder=설정 안함 - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/lt.auto b/ldap-server/lang/lt.auto index 379afd0f4..381c87a90 100644 --- a/ldap-server/lang/lt.auto +++ b/ldap-server/lang/lt.auto @@ -39,7 +39,6 @@ slapd_rootpw=Administracijos slaptažodis slapd_root1=„Unix“ užšifruotas $1 slapd_root2=SHA1 užšifruotas $1 slapd_root3=Šifruotas $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Nenustatytas slaptažodis slapd_rootchange=Naujas administravimo slaptažodis slapd_leave=Nekeisk @@ -84,13 +83,11 @@ schema_title=Tvarkyti schemą schema_file=vardas schema_desc=apibūdinimas schema_pagedesc=LDAP schema nustato, kurias objektų klases ir atributus galima saugoti jūsų LDAP duomenų bazėje. Šis puslapis leidžia jums pasirinkti, kuriuos schemų tipus palaiko jūsų serveris, tačiau atsargiai pašalinkite bet kuriuos įrašus, kuriuos naudoja esami objektai. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Nepavyko išsaugoti schemos schema_move=Judėk schema_act=Veiksmai .. schema_view=Vaizdas schema_edit=Redaguoti -schema_import=Import schema_edir=Failo nėra schemos kataloge! schema_etitle=Redaguoti schemos failą schema_eheader=Schemos failo turinys @@ -216,7 +213,6 @@ apply_ecannot=Jums neleidžiama naudoti konfigūracijos stop_err=Nepavyko sustabdyti LDAP serverio stop_ecmd=$1 nepavyko : $2 stop_egone=Nebėra! -stop_egone2=Running but PID is unknown! stop_ekill=Nužudymo procesas nepavyko : $1 stop_ecannot=Jums neleidžiama sustabdyti LDAP serverio @@ -330,12 +326,3 @@ eacl_ewho=Trūksta arba netinkamai atrodo DN 1 eilutėje eacl_eaccess=Trūksta arba netinkamas prieigos lygis $1 eilutėje eacl_order=Taisyklių tvarka eacl_noorder=Nėra nustatyta - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/lv.auto b/ldap-server/lang/lv.auto index 2ad994485..9502959c2 100644 --- a/ldap-server/lang/lv.auto +++ b/ldap-server/lang/lv.auto @@ -39,7 +39,6 @@ slapd_rootpw=Administrācijas parole slapd_root1=Unix šifrēts $1 slapd_root2=SHA1 šifrēts $1 slapd_root3=Šifrēts $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Parole nav iestatīta slapd_rootchange=Jauna administrēšanas parole slapd_leave=Nemaini @@ -84,13 +83,11 @@ schema_title=Pārvaldīt shēmu schema_file=Vārds schema_desc=Apraksts schema_pagedesc=LDAP shēma nosaka, kuras objektu klases un atribūtus var saglabāt jūsu LDAP datu bāzē. Šī lapa ļauj jums izvēlēties, kurus shēmu veidus atbalsta jūsu serveris, taču esiet piesardzīgs, atceļot visus ierakstus, kurus izmanto esošie objekti. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Neizdevās saglabāt shēmu schema_move=Kustēties schema_act=Darbības .. schema_view=Skats schema_edit=Rediģēt -schema_import=Import schema_edir=Fails neatrodas shēmas direktorijā! schema_etitle=Rediģēt shēmas failu schema_eheader=Shēmas faila saturs @@ -216,7 +213,6 @@ apply_ecannot=Jums nav atļauts lietot konfigurāciju stop_err=Neizdevās apturēt LDAP serveri stop_ecmd=$1 neizdevās : $2 stop_egone=Vairs neskrien! -stop_egone2=Running but PID is unknown! stop_ekill=Nogalināšanas process neizdevās : $1 stop_ecannot=Jums nav atļauts apturēt LDAP serveri @@ -330,12 +326,3 @@ eacl_ewho=Trūkst vai nederīga izskata DN rindā $1 eacl_eaccess=Trūkst vai nav derīgs piekļuves līmenis rindā $1 eacl_order=Noteikumu kārtība eacl_noorder=Nav iestatīts - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/ms.auto b/ldap-server/lang/ms.auto index 98ae17b7d..2a03e293f 100644 --- a/ldap-server/lang/ms.auto +++ b/ldap-server/lang/ms.auto @@ -39,7 +39,6 @@ slapd_rootpw=Kata laluan pentadbiran slapd_root1=Unix disulitkan $1 slapd_root2=SHA1 disulitkan $1 slapd_root3=Disulitkan $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Tiada kata laluan ditetapkan slapd_rootchange=Kata laluan pentadbiran baru slapd_leave=Jangan ubah @@ -84,13 +83,11 @@ schema_title=Uruskan Skema schema_file=Nama schema_desc=Penerangan schema_pagedesc=Skema LDAP menentukan kelas dan atribut objek yang boleh disimpan dalam pangkalan data LDAP anda. Halaman ini membolehkan anda memilih jenis skema yang mana yang disokong oleh pelayan anda - tetapi berhati-hati menolak semua entri yang digunakan oleh objek yang ada. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Gagal menyimpan skema schema_move=Pindah schema_act=Tindakan .. schema_view=Lihat schema_edit=Edit -schema_import=Import schema_edir=Fail tidak dalam direktori skema! schema_etitle=Edit Fail Skema schema_eheader=Kandungan fail skema @@ -216,7 +213,6 @@ apply_ecannot=Anda tidak dibenarkan memohon konfigurasi stop_err=Gagal menghentikan pelayan LDAP stop_ecmd=$1 gagal : $2 stop_egone=Tidak lagi berlari! -stop_egone2=Running but PID is unknown! stop_ekill=Proses membunuh gagal : $1 stop_ecannot=Anda tidak dibenarkan untuk menghentikan pelayan LDAP @@ -330,12 +326,3 @@ eacl_ewho=DN yang hilang atau tidak sah dalam baris $1 eacl_eaccess=Tahap akses hilang atau tidak sah dalam baris $1 eacl_order=Aturan perintah eacl_noorder=Tiada set - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/mt.auto b/ldap-server/lang/mt.auto index 64bf9666e..6a6701012 100644 --- a/ldap-server/lang/mt.auto +++ b/ldap-server/lang/mt.auto @@ -39,7 +39,6 @@ slapd_rootpw=Password tal-amministrazzjoni slapd_root1=Unix kriptat $1 slapd_root2=SHA1 kriptat $1 slapd_root3=Ikkriptat $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=L-ebda sett ta 'password slapd_rootchange=Password ta ’amministrazzjoni ġdida slapd_leave=Tbiddilx @@ -84,13 +83,11 @@ schema_title=Immaniġġja l-Iskema schema_file=Isem schema_desc=Deskrizzjoni schema_pagedesc=L-iskema LDAP tiddetermina liema klassijiet ta 'oġġett u attributi jistgħu jinħażnu fid-database LDAP tiegħek. Din il-paġna jippermettilek tagħżel liema tipi ta 'skema huma appoġġjati mis-server tiegħek - imma oqgħod attent li tagħżel kwalunkwe daħla li tintuża minn oġġetti eżistenti. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Ma rnexxielux isalva l-iskema schema_move=Tmexxi schema_act=Azzjonijiet .. schema_view=Ara schema_edit=Editja -schema_import=Import schema_edir=Il-fajl mhux fid-direttorju tal-iskema! schema_etitle=Editja l-Iskema tal-Fajl schema_eheader=Skema tal-kontenut tal-fajl @@ -216,7 +213,6 @@ apply_ecannot=M'għandekx permess tapplika l-konfigurazzjoni stop_err=Ma rnexxielux iwaqqaf server LDAP stop_ecmd=$1 falla : $2 stop_egone=Ma għadux għaddej! -stop_egone2=Running but PID is unknown! stop_ekill=Proċess ta 'qtil falla : $1 stop_ecannot=M'għandekx permess twaqqaf is-server LDAP @@ -330,12 +326,3 @@ eacl_ewho=DN nieqes jew li jidher b'validu fir-ringiela $1 eacl_eaccess=Livell ta 'aċċess nieqes jew invalidu fir-ringiela $1 eacl_order=Ordni tar-Regoli eacl_noorder=L-ebda sett - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/nl.auto b/ldap-server/lang/nl.auto index 2e8ba0fca..9eb2503db 100644 --- a/ldap-server/lang/nl.auto +++ b/ldap-server/lang/nl.auto @@ -1,22 +1,6 @@ -slapd_root4=SSHA encrypted $1 - -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. -schema_import=Import - acl_order=Bestellen -stop_egone2=Running but PID is unknown! - gencert_epath=Certificaat- en sleutelbestanden in de LDAP-serverconfiguratie moeten absolute paden zijn eacl_order=Regel volgorde eacl_noorder=Geen ingesteld - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/no.auto b/ldap-server/lang/no.auto deleted file mode 100644 index 49f35bce1..000000000 --- a/ldap-server/lang/no.auto +++ /dev/null @@ -1,15 +0,0 @@ -slapd_root4=SSHA encrypted $1 - -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. -schema_import=Import - -stop_egone2=Running but PID is unknown! - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/pl.auto b/ldap-server/lang/pl.auto index 7d39bcfe3..5ae5a9a7d 100644 --- a/ldap-server/lang/pl.auto +++ b/ldap-server/lang/pl.auto @@ -39,7 +39,6 @@ slapd_rootpw=Hasło administracyjne slapd_root1=Unix zaszyfrowany $1 slapd_root2=SHA1 zaszyfrowane $1 slapd_root3=Zaszyfrowane $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Nie ustawiono hasła slapd_rootchange=Nowe hasło administracyjne slapd_leave=Nie zmieniaj się @@ -84,13 +83,11 @@ schema_title=Zarządzaj schematem schema_file=Nazwa schema_desc=Opis schema_pagedesc=Schemat LDAP określa, które klasy obiektów i atrybuty mogą być przechowywane w bazie danych LDAP. Ta strona umożliwia wybranie typów schematów obsługiwanych przez serwer - ale należy uważnie odznaczyć wszystkie wpisy używane przez istniejące obiekty. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Nie udało się zapisać schematu schema_move=Ruszaj się schema_act=Działania .. schema_view=Widok schema_edit=Edytować -schema_import=Import schema_edir=Plik nie znajduje się w katalogu schematu! schema_etitle=Edytuj plik schematu schema_eheader=Zawartość pliku schematu @@ -216,7 +213,6 @@ apply_ecannot=Nie możesz zastosować konfiguracji stop_err=Nie udało się zatrzymać serwera LDAP stop_ecmd=Błąd $1 : $2 stop_egone=Już nie działa! -stop_egone2=Running but PID is unknown! stop_ekill=Proces zabijania nie powiódł się : $1 stop_ecannot=Nie możesz zatrzymać serwera LDAP @@ -330,12 +326,3 @@ eacl_ewho=Brakująca lub niepoprawnie wyglądająca nazwa wyróżniająca w wier eacl_eaccess=Brakujący lub nieprawidłowy poziom dostępu w wierszu $1 eacl_order=Porządek reguł eacl_noorder=Brak zestawu - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/pt.auto b/ldap-server/lang/pt.auto index 9a174595e..38e05f143 100644 --- a/ldap-server/lang/pt.auto +++ b/ldap-server/lang/pt.auto @@ -39,7 +39,6 @@ slapd_rootpw=Senha de administração slapd_root1=Unix criptografado $1 slapd_root2=SHA1 criptografado $1 slapd_root3=Criptografado $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Nenhuma senha definida slapd_rootchange=Nova senha de administração slapd_leave=Não mude @@ -84,13 +83,11 @@ schema_title=Gerenciar esquema schema_file=Nome schema_desc=Descrição schema_pagedesc=O esquema LDAP determina quais classes e atributos de objetos podem ser armazenados no seu banco de dados LDAP. Esta página permite selecionar quais tipos de esquema são suportados pelo servidor - mas tenha cuidado ao desmarcar todas as entradas usadas pelos objetos existentes. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Falha ao salvar o esquema schema_move=Mover schema_act=Ações .. schema_view=Visão schema_edit=Editar -schema_import=Import schema_edir=O arquivo não está no diretório do esquema! schema_etitle=Editar arquivo de esquema schema_eheader=Conteúdo do arquivo de esquema @@ -216,7 +213,6 @@ apply_ecannot=Você não tem permissão para aplicar a configuração stop_err=Falha ao parar o servidor LDAP stop_ecmd=$1 falhou : $2 stop_egone=Não está mais em execução! -stop_egone2=Running but PID is unknown! stop_ekill=Falha no processo de interrupção : $1 stop_ecannot=Você não tem permissão para parar o servidor LDAP @@ -330,12 +326,3 @@ eacl_ewho=DN ausente ou com aparência inválida na linha $1 eacl_eaccess=Nível de acesso ausente ou inválido na linha $1 eacl_order=Ordem das regras eacl_noorder=Nenhuma definida - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/pt_BR.auto b/ldap-server/lang/pt_BR.auto index 9c788ce84..b33e112e9 100644 --- a/ldap-server/lang/pt_BR.auto +++ b/ldap-server/lang/pt_BR.auto @@ -1,25 +1,9 @@ -slapd_root4=SSHA encrypted $1 - -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. -schema_import=Import - acl_order=Ordem oadd_err=Falha ao criar novo objeto -stop_egone2=Running but PID is unknown! - gencert_epath=Os arquivos de certificado e chave na configuração do servidor LDAP devem ser caminhos absolutos eacl_what2=Objetos sem DN eacl_order=Ordem das regras eacl_noorder=Nenhuma definida - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/ro.auto b/ldap-server/lang/ro.auto index f08dfa12e..eeaa66465 100644 --- a/ldap-server/lang/ro.auto +++ b/ldap-server/lang/ro.auto @@ -39,7 +39,6 @@ slapd_rootpw=Parola de administrare slapd_root1=Unix criptat $1 slapd_root2=SHA1 criptat $1 slapd_root3=$1 criptat -slapd_root4=SSHA encrypted $1 slapd_noroot=Fără parolă setată slapd_rootchange=Parolă nouă de administrare slapd_leave=Nu schimba @@ -84,13 +83,11 @@ schema_title=Gestionați schema schema_file=Nume schema_desc=Descriere schema_pagedesc=Schema LDAP stabilește ce clase de obiecte și atribute pot fi stocate în baza de date LDAP. Această pagină vă permite să selectați care tipuri de scheme sunt acceptate de serverul dvs., dar aveți grijă să deselectați orice intrări care sunt utilizate de obiectele existente. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Nu a reușit să salveze schema schema_move=Mișcare schema_act=Acțiuni .. schema_view=Vedere schema_edit=Editați | × -schema_import=Import schema_edir=Fișierul nu se află în directorul schemelor! schema_etitle=Editează schema fișier schema_eheader=Conținutul fișierului schemei @@ -216,7 +213,6 @@ apply_ecannot=Nu aveți voie să aplicați configurația stop_err=Nu a reușit oprirea serverului LDAP stop_ecmd=$1 a eșuat : $2 stop_egone=Nu mai alerga! -stop_egone2=Running but PID is unknown! stop_ekill=Procesul de ucidere a eșuat : $1 stop_ecannot=Nu aveți voie să opriți serverul LDAP @@ -330,12 +326,3 @@ eacl_ewho=DN lipsă sau cu aspect nevalid din rândul $1 eacl_eaccess=Nivelul de acces lipsă sau nevalid din rândul $1 eacl_order=Ordinea regulilor eacl_noorder=Nu este setat - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/ru.auto b/ldap-server/lang/ru.auto index 7d2acff1f..9e6b68225 100644 --- a/ldap-server/lang/ru.auto +++ b/ldap-server/lang/ru.auto @@ -39,7 +39,6 @@ slapd_rootpw=Пароль администратора slapd_root1=Unix зашифрованный $1 slapd_root2=SHA1 в зашифрованном виде $1 slapd_root3=Зашифровано $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Пароль не установлен slapd_rootchange=Новый пароль администратора slapd_leave=Не меняй @@ -84,13 +83,11 @@ schema_title=Управлять схемой schema_file=имя schema_desc=Описание schema_pagedesc=Схема LDAP определяет, какие классы объектов и атрибуты могут храниться в вашей базе данных LDAP. На этой странице вы можете выбрать, какие типы схем поддерживаются вашим сервером, но будьте осторожны, отменив выбор записей, которые используются существующими объектами. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Не удалось сохранить схему schema_move=Переехать schema_act=Действия .. schema_view=Посмотреть schema_edit=редактировать -schema_import=Import schema_edir=Файл не находится в каталоге схемы! schema_etitle=Редактировать файл схемы schema_eheader=Содержимое файла схемы @@ -216,7 +213,6 @@ apply_ecannot=Вам не разрешено применять конфигур stop_err=Не удалось остановить сервер LDAP stop_ecmd=Ошибка $1 : $2 stop_egone=Больше не работает! -stop_egone2=Running but PID is unknown! stop_ekill=Процесс уничтожения не выполнен : $1 stop_ecannot=Вы не можете остановить сервер LDAP @@ -330,12 +326,3 @@ eacl_ewho=Отсутствующее или неверно выглядящее eacl_eaccess=Отсутствует или неверный уровень доступа в строке $1 eacl_order=Порядок правил eacl_noorder=Не установлен - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/sk.auto b/ldap-server/lang/sk.auto index ac38899f5..0d25c8a86 100644 --- a/ldap-server/lang/sk.auto +++ b/ldap-server/lang/sk.auto @@ -39,7 +39,6 @@ slapd_rootpw=Heslo pre správu slapd_root1=Unix šifrovaný $1 slapd_root2=SHA1 šifrovaný $1 slapd_root3=Šifrované $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Nie je nastavené žiadne heslo slapd_rootchange=Nové administračné heslo slapd_leave=Nemeňte sa @@ -84,13 +83,11 @@ schema_title=Spravovať schému schema_file=názov schema_desc=popis schema_pagedesc=Schéma LDAP určuje, ktoré triedy objektov a atribúty môžu byť uložené v databáze LDAP. Táto stránka vám umožňuje vybrať, ktoré typy schém váš server podporuje - ale starostlivo zrušte výber všetkých položiek, ktoré používajú existujúce objekty. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Schému sa nepodarilo uložiť schema_move=sťahovať schema_act=Akcia .. schema_view=vyhliadka schema_edit=editovať -schema_import=Import schema_edir=Súbor sa nenachádza v adresári schém! schema_etitle=Upraviť súbor schémy schema_eheader=Obsah súboru schémy @@ -216,7 +213,6 @@ apply_ecannot=Nemáte povolenie použiť konfiguráciu stop_err=Zastavenie servera LDAP zlyhalo stop_ecmd=$1 zlyhalo : $2 stop_egone=Už nebeží! -stop_egone2=Running but PID is unknown! stop_ekill=Proces zabitia zlyhal : $1 stop_ecannot=Nemáte povolenie zastaviť server LDAP @@ -330,12 +326,3 @@ eacl_ewho=Chýbajúce alebo zle vyzerajúce DN v riadku $1 eacl_eaccess=Chýbajúca alebo neplatná úroveň prístupu v riadku $1 eacl_order=Poradie pravidiel eacl_noorder=Žiadne - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/sl.auto b/ldap-server/lang/sl.auto index 03ff2ceb3..85f52174d 100644 --- a/ldap-server/lang/sl.auto +++ b/ldap-server/lang/sl.auto @@ -39,7 +39,6 @@ slapd_rootpw=Geslo za administracijo slapd_root1=Unix kodiran $1 slapd_root2=SHA1 šifrirano $1 slapd_root3=Šifrirano $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Ni nastavljeno geslo slapd_rootchange=Novo skrbniško geslo slapd_leave=Ne spreminjaj se @@ -84,13 +83,11 @@ schema_title=Upravljajte shemo schema_file=Ime schema_desc=Opis schema_pagedesc=Shema LDAP določa, katere razrede objektov in atribute lahko shranite v bazo podatkov LDAP. Ta stran vam omogoča, da izberete, katere vrste shem podpira vaš strežnik, vendar bodite previdni, da izberete vse vnose, ki jih uporabljajo obstoječi predmeti. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Sheme ni bilo mogoče shraniti schema_move=Premakni se schema_act=Ukrepi .. schema_view=Pogled schema_edit=Uredi -schema_import=Import schema_edir=Datoteke ni v imeniku sheme! schema_etitle=Uredi datoteko sheme schema_eheader=Vsebina datoteke sheme @@ -216,7 +213,6 @@ apply_ecannot=Konfiguracije ne morete uporabiti stop_err=Zaustavitve strežnika LDAP ni uspelo stop_ecmd=$1 ni uspelo : $2 stop_egone=Ne teče več! -stop_egone2=Running but PID is unknown! stop_ekill=Postopek ubijanja ni uspel : $1 stop_ecannot=Ne morete ustaviti strežnika LDAP @@ -330,12 +326,3 @@ eacl_ewho=Manjkajoč ali neveljaven videz DN v vrstici $1 eacl_eaccess=V vrstici $1 manjka ali ni veljavna raven dostopa eacl_order=Redni red eacl_noorder=Ni nastavljeno - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/sv.auto b/ldap-server/lang/sv.auto index 0b8a6955d..c97b78257 100644 --- a/ldap-server/lang/sv.auto +++ b/ldap-server/lang/sv.auto @@ -39,7 +39,6 @@ slapd_rootpw=Administrationslösenord slapd_root1=Unix krypterat $1 slapd_root2=SHA1 krypterat $1 slapd_root3=Krypterat $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Inget lösenord har ställts in slapd_rootchange=Nytt administrationslösenord slapd_leave=Ändra inte @@ -84,13 +83,11 @@ schema_title=Hantera schema schema_file=namn schema_desc=Beskrivning schema_pagedesc=LDAP-schemat avgör vilka objektklasser och attribut som kan lagras i din LDAP-databas. På den här sidan kan du välja vilka schematyper som stöds av din server - men var noga med att avmarkera alla poster som används av befintliga objekt. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Det gick inte att spara schemat schema_move=Flytta schema_act=Handlingar .. schema_view=Se schema_edit=Redigera -schema_import=Import schema_edir=Filen finns inte i schemakatalogen! schema_etitle=Redigera schemafil schema_eheader=Innehåll i schemafilen @@ -216,7 +213,6 @@ apply_ecannot=Du får inte tillämpa konfigurationen stop_err=Det gick inte att stoppa LDAP-servern stop_ecmd=$1 misslyckades : $2 stop_egone=Kör inte längre! -stop_egone2=Running but PID is unknown! stop_ekill=Dödsprocessen misslyckades : $1 stop_ecannot=Du får inte stoppa LDAP-servern @@ -330,12 +326,3 @@ eacl_ewho=DN saknas eller ogiltigt i rad $1 eacl_eaccess=Saknad eller ogiltig åtkomstnivå i rad $1 eacl_order=Regelordning eacl_noorder=Ingen uppsättning - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/th.auto b/ldap-server/lang/th.auto index dd96e0b03..70eda91c5 100644 --- a/ldap-server/lang/th.auto +++ b/ldap-server/lang/th.auto @@ -39,7 +39,6 @@ slapd_rootpw=รหัสผ่านการบริหาร slapd_root1=Unix เข้ารหัส $1 slapd_root2=SHA1 เข้ารหัส $1 slapd_root3=เข้ารหัส $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=ไม่มีการตั้งรหัสผ่าน slapd_rootchange=รหัสผ่านการบริหารใหม่ slapd_leave=อย่าเปลี่ยน @@ -84,13 +83,11 @@ schema_title=จัดการสคีมา schema_file=ชื่อ schema_desc=ลักษณะ schema_pagedesc=LDAP schema กำหนดคลาสอ็อบเจ็กต์และแอ็ตทริบิวต์ที่สามารถเก็บในฐานข้อมูล LDAP ของคุณ หน้านี้ช่วยให้คุณสามารถเลือกประเภทสคีมาที่เซิร์ฟเวอร์ของคุณรองรับได้ แต่ระวังการยกเลิกการเลือกรายการใด ๆ ที่ใช้โดยออบเจ็กต์ที่มีอยู่ -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=บันทึกสคีมาไม่สำเร็จ schema_move=ย้าย schema_act=การดำเนินการ .. schema_view=ดู schema_edit=แก้ไข -schema_import=Import schema_edir=ไฟล์ไม่ได้อยู่ในไดเรกทอรีสคีมา! schema_etitle=แก้ไขไฟล์สคีมา schema_eheader=เนื้อหาไฟล์สคีมา @@ -216,7 +213,6 @@ apply_ecannot=คุณไม่ได้รับอนุญาตให้ใ stop_err=ไม่สามารถหยุดเซิร์ฟเวอร์ LDAP stop_ecmd=$1 ล้มเหลว : $2 stop_egone=ไม่ทำงานอีกต่อไป! -stop_egone2=Running but PID is unknown! stop_ekill=กระบวนการฆ่าล้มเหลว : $1 stop_ecannot=คุณไม่ได้รับอนุญาตให้หยุดเซิร์ฟเวอร์ LDAP @@ -330,12 +326,3 @@ eacl_ewho=ไม่มีหรือดู DN ไม่ถูกต้องใ eacl_eaccess=ระดับการเข้าถึงขาดหายไปหรือไม่ถูกต้องในแถว $1 eacl_order=ลำดับกฎ eacl_noorder=ไม่มีชุด - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/tr.auto b/ldap-server/lang/tr.auto index 48af720a7..f67c89fc0 100644 --- a/ldap-server/lang/tr.auto +++ b/ldap-server/lang/tr.auto @@ -39,7 +39,6 @@ slapd_rootpw=Yönetim şifresi slapd_root1=Unix şifreli $1 slapd_root2=SHA1 şifreli $1 slapd_root3=Şifreli $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Parola ayarlanmadı slapd_rootchange=Yeni yönetim şifresi slapd_leave=Değişme @@ -84,13 +83,11 @@ schema_title=Şemayı Yönet schema_file=ad schema_desc=Açıklama schema_pagedesc=LDAP şeması, LDAP veritabanınızda hangi nesne sınıflarının ve niteliklerinin saklanabileceğini belirler. Bu sayfa sunucunuz tarafından hangi şema türlerinin desteklendiğini seçmenize izin verir - ancak mevcut nesneler tarafından kullanılan girişlerin seçimini kaldırırken dikkatli olun. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Şema kaydedilemedi schema_move=Hareket schema_act=Hareketler .. schema_view=Görünüm schema_edit=Düzenle -schema_import=Import schema_edir=Dosya şema dizininde değil! schema_etitle=Şema Dosyasını Düzenle schema_eheader=Şema dosya içeriği @@ -216,7 +213,6 @@ apply_ecannot=Yapılandırmayı uygulama izniniz yok stop_err=LDAP sunucusu durdurulamadı stop_ecmd=$1 başarısız oldu : $2 stop_egone=Artık koşmuyor! -stop_egone2=Running but PID is unknown! stop_ekill=Öldürme işlemi başarısız oldu : $1 stop_ecannot=LDAP sunucusunu durdurmanıza izin verilmiyor @@ -330,12 +326,3 @@ eacl_ewho=$1 satırında eksik veya geçersiz görünen DN eacl_eaccess=$1 satırında eksik veya geçersiz erişim düzeyi eacl_order=Kural sırası eacl_noorder=Hiçbiri ayarlanmadı - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/uk.auto b/ldap-server/lang/uk.auto index 4029475b7..9c65cad99 100644 --- a/ldap-server/lang/uk.auto +++ b/ldap-server/lang/uk.auto @@ -39,7 +39,6 @@ slapd_rootpw=Пароль адміністрації slapd_root1=Unix зашифровано $1 slapd_root2=Зашифрований SHA1 $1 slapd_root3=Зашифровано $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Не встановлено пароль slapd_rootchange=Новий пароль адміністратора slapd_leave=Не змінюйся @@ -84,13 +83,11 @@ schema_title=Управління схемою schema_file=Ім'я schema_desc=Опис schema_pagedesc=Схема LDAP визначає, які класи та атрибути об'єктів можуть зберігатися у вашій базі даних LDAP. На цій сторінці ви можете вибрати, які типи схем підтримуються вашим сервером, але будьте обережні, вибираючи записи, які використовуються існуючими об'єктами. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Не вдалося зберегти схему schema_move=Рухатися schema_act=Дії .. schema_view=Вид schema_edit=Редагувати -schema_import=Import schema_edir=Файл відсутній у каталозі схем! schema_etitle=Редагувати файл схеми schema_eheader=Вміст файлу схеми @@ -216,7 +213,6 @@ apply_ecannot=Вам заборонено застосовувати конфі stop_err=Не вдалося зупинити сервер LDAP stop_ecmd=$1 не вдалося : $2 stop_egone=Більше не працює! -stop_egone2=Running but PID is unknown! stop_ekill=Помилка процесу вбивства : $1 stop_ecannot=Вам заборонено зупиняти сервер LDAP @@ -330,12 +326,3 @@ eacl_ewho=Відсутній або недійсний вигляд DN у ряд eacl_eaccess=Відсутній або недійсний рівень доступу в рядку $1 eacl_order=Правило порядку eacl_noorder=Не встановлено - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/ur.auto b/ldap-server/lang/ur.auto index deea8367b..192887598 100644 --- a/ldap-server/lang/ur.auto +++ b/ldap-server/lang/ur.auto @@ -39,7 +39,6 @@ slapd_rootpw=انتظامیہ کا پاس ورڈ slapd_root1=Unix encrypted $1 slapd_root2=SHA1 encrypted $1 slapd_root3=Encrypted $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=No password set slapd_rootchange=انتظامیہ کا نیا پاس ورڈ slapd_leave=مت بدلاؤ @@ -84,13 +83,11 @@ schema_title=اسکیما کا انتظام کریں schema_file=نام schema_desc=تفصیل schema_pagedesc=LDAP اسکیمہ طے کرتا ہے کہ آپ کے LDAP ڈیٹا بیس میں کونسی آبجیکٹ کلاسز اور اوصاف کو محفوظ کیا جاسکتا ہے۔ یہ صفحہ آپ کو یہ منتخب کرنے کی اجازت دیتا ہے کہ آپ کے سرور کے ذریعہ کس قسم کی اسکیما کی تائید حاصل ہے - لیکن محتاط رہیں کہ کسی بھی اندراجات کا انتخاب کرکے جو موجودہ چیزوں کے ذریعہ استعمال ہوتا ہے۔ -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=اسکیما کو بچانے میں ناکام schema_move=اقدام schema_act=عمل .. schema_view=دیکھیں schema_edit=ترمیم -schema_import=Import schema_edir=فائل اسکیما ڈائرکٹری میں نہیں ہے! schema_etitle=سکیما فائل میں ترمیم کریں schema_eheader=اسکیما فائل کے مندرجات @@ -216,7 +213,6 @@ apply_ecannot=آپ کو ترتیب کا اطلاق کرنے کی اجازت نہ stop_err=ایل ڈی اے پی سرور کو روکنے میں ناکام stop_ecmd=$1 ناکام :$2 stop_egone=اب نہیں چل رہا! -stop_egone2=Running but PID is unknown! stop_ekill=قتل کا عمل ناکام ہوگیا :$1 stop_ecannot=آپ کو ایل ڈی اے پی سرور کو روکنے کی اجازت نہیں ہے @@ -330,12 +326,3 @@ eacl_ewho=$1 قطار میں DN لاپتہ یا غلط eacl_eaccess=$1 صف میں رسائی یا گمراہ رسائی eacl_order=حکمرانی کا حکم eacl_noorder=کوئی سیٹ نہیں - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/vi.auto b/ldap-server/lang/vi.auto index 2dbf0b21c..69a6fd07d 100644 --- a/ldap-server/lang/vi.auto +++ b/ldap-server/lang/vi.auto @@ -39,7 +39,6 @@ slapd_rootpw=Mật khẩu quản trị slapd_root1=Mã hóa Unix $1 slapd_root2=Mã hóa SHA1 $1 slapd_root3=Được mã hóa $1 -slapd_root4=SSHA encrypted $1 slapd_noroot=Không có mật khẩu được đặt slapd_rootchange=Mật khẩu quản trị mới slapd_leave=Đừng thay đổi @@ -84,13 +83,11 @@ schema_title=Quản lý lược đồ schema_file=Tên schema_desc=Sự miêu tả schema_pagedesc=Lược đồ LDAP xác định các lớp đối tượng và thuộc tính nào có thể được lưu trữ trong cơ sở dữ liệu LDAP của bạn. Trang này cho phép bạn chọn loại lược đồ nào được máy chủ của bạn hỗ trợ - nhưng hãy cẩn thận bỏ chọn bất kỳ mục nào được sử dụng bởi các đối tượng hiện có. -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=Không thể lưu lược đồ schema_move=Di chuyển schema_act=Hành động .. schema_view=Lượt xem schema_edit=Biên tập -schema_import=Import schema_edir=Tệp không có trong thư mục lược đồ! schema_etitle=Chỉnh sửa tập tin lược đồ schema_eheader=Nội dung tập tin lược đồ @@ -216,7 +213,6 @@ apply_ecannot=Bạn không được phép áp dụng cấu hình stop_err=Không thể dừng máy chủ LDAP stop_ecmd=$1 thất bại : $2 stop_egone=Không còn chạy! -stop_egone2=Running but PID is unknown! stop_ekill=Quá trình tiêu diệt không thành công : $1 stop_ecannot=Bạn không được phép dừng máy chủ LDAP @@ -330,12 +326,3 @@ eacl_ewho=DN bị thiếu hoặc không hợp lệ trong hàng $1 eacl_eaccess=Cấp truy cập bị thiếu hoặc không hợp lệ trong hàng $1 eacl_order=Thứ tự quy tắc eacl_noorder=Không có bộ nào - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/zh.auto b/ldap-server/lang/zh.auto index fe3a7b5e7..6180180c7 100644 --- a/ldap-server/lang/zh.auto +++ b/ldap-server/lang/zh.auto @@ -39,7 +39,6 @@ slapd_rootpw=管理密码 slapd_root1=Unix加密的$1 slapd_root2=SHA1加密的$1 slapd_root3=加密的$1 -slapd_root4=SSHA encrypted $1 slapd_noroot=未设置密码 slapd_rootchange=新的管理密码 slapd_leave=不要改变 @@ -84,13 +83,11 @@ schema_title=管理架构 schema_file=名称 schema_desc=描述 schema_pagedesc=LDAP模式确定可以在LDAP数据库中存储哪些对象类和属性。该页面允许您选择服务器支持的模式类型-但要小心选择现有对象使用的所有条目。 -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=保存架构失败 schema_move=移动 schema_act=动作 .. schema_view=视图 schema_edit=编辑 -schema_import=Import schema_edir=文件不在架构目录中！ schema_etitle=编辑架构文件 schema_eheader=模式文件内容 @@ -216,7 +213,6 @@ apply_ecannot=不允许您应用配置 stop_err=停止LDAP服务器失败 stop_ecmd=$1失败： $2 stop_egone=不再运行！ -stop_egone2=Running but PID is unknown! stop_ekill=杀死进程失败： $1 stop_ecannot=您无权停止LDAP服务器 @@ -330,12 +326,3 @@ eacl_ewho=第 $1行中的DN缺失或外观无效 eacl_eaccess=$1行缺少或无效的访问级别 eacl_order=规则顺序 eacl_noorder=没有设置 - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-server/lang/zh_TW.auto b/ldap-server/lang/zh_TW.auto index 8e61820ab..4b7bbb74d 100644 --- a/ldap-server/lang/zh_TW.auto +++ b/ldap-server/lang/zh_TW.auto @@ -39,7 +39,6 @@ slapd_rootpw=管理密碼 slapd_root1=Unix加密的$1 slapd_root2=SHA1加密的$1 slapd_root3=加密的$1 -slapd_root4=SSHA encrypted $1 slapd_noroot=未設置密碼 slapd_rootchange=新的管理密碼 slapd_leave=不要改變 @@ -84,13 +83,11 @@ schema_title=管理架構 schema_file=名稱 schema_desc=描述 schema_pagedesc=LDAP模式確定哪些對像類和屬性可以存儲在LDAP數據庫中。該頁面允許您選擇服務器支持的模式類型-但要小心選擇現有對象使用的所有條目。 -schema_pagedesc2=The LDAP schema determines which object classes and attributes can be stored in your LDAP database. Schemas files must be imported before their types can be used to create objects. schema_err=保存架構失敗 schema_move=移動 schema_act=動作 .. schema_view=視圖 schema_edit=編輯 -schema_import=Import schema_edir=文件不在架構目錄中！ schema_etitle=編輯架構文件 schema_eheader=模式文件內容 @@ -216,7 +213,6 @@ apply_ecannot=不允許您應用配置 stop_err=停止LDAP服務器失敗 stop_ecmd=$1失敗： $2 stop_egone=不再運行！ -stop_egone2=Running but PID is unknown! stop_ekill=殺死進程失敗： $1 stop_ecannot=您無權停止LDAP服務器 @@ -330,12 +326,3 @@ eacl_ewho=第 $1行中缺少DN或外觀無效的DN eacl_eaccess=$1行缺少或無效的訪問級別 eacl_order=規則順序 eacl_noorder=沒有設置 - -import_err=Failed to import schema -import_eldapadd=Could not find the $1 command -import_euser=Could not work out LDAP server login -import_eldif=LDIF file $1 does not exist -import_title=Import Schema -import_doing=Importing LDIF schema file $1 .. -import_failed=.. import failed! -import_ok=.. import completed successfully diff --git a/ldap-useradmin/lang/de b/ldap-useradmin/lang/de index bb14f0158..b204fa670 100644 --- a/ldap-useradmin/lang/de +++ b/ldap-useradmin/lang/de @@ -100,4 +100,4 @@ raw_for=Für $1 batch_samba=Erstellen Sie ein Samba-Konto für neue Benutzer? batch_imap=Erstellen Sie ein IMAP-Konto für neue Benutzer? batch_descafter3=In create und modify-Zeilen können optional zusätzliche Felder hinzugefügt werden, die LDAP-Attribute im name=value-Format enthalten, die den neuen oder geänderten Benutzern zugewiesen werden. -batch_eattr=Ungültiges LDAP-Attribut in Zeile $1 : $2 +batch_eattr=Ungültiges LDAP-Attribut in Zeile $1 : $2 \ No newline at end of file diff --git a/lilo/lang/af.auto b/lilo/lang/af.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/af.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/ar.auto b/lilo/lang/ar.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/ar.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/be.auto b/lilo/lang/be.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/be.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/bg.auto b/lilo/lang/bg.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/bg.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/ca b/lilo/lang/ca index d3f8e2bdd..722cfc10b 100644 --- a/lilo/lang/ca +++ b/lilo/lang/ca @@ -10,7 +10,6 @@ index_applymsg3=Assegura't que la configuració és correcta abans de reengegar! index_return=a les particions i nuclis index_earch=LILO només està suportat en sistemes d'arquitectura x86 index_econf=El fitxer de configuració LILO $1 no existeix. Pot ser que el sistema estigui utilitzant un altre gestor d'engegada. - global_title=Opcions Globals global_desc=Opcions Globals d'Engegada global_boot=Escriu el gestor d'engegada a @@ -33,10 +32,8 @@ global_any=Qualsevol global_secs=segons global_lba=Permet l'engegada per sobre dels 1024 cilindres global_err=No s'han pogut desar les opcions globals - apply_title=Aplica la Configuració apply_exec=S'està aplicant la configuració del LILO amb l'ordre $1... - image_title1=Creació de Nucli image_title2=Edició de Nucli image_options=Opcions del Nucli @@ -67,7 +64,6 @@ image_none=Cap image_ename=Falta el nom d'aquest nucli image_ekernel=La imatge '$1' del nucli no existeix image_einitrd=El fitxer ramdisk inicial '$1' no existeix - other_title1=Creació de Partició other_title2=Edició de Partició other_details=Detalls de la Partició @@ -78,7 +74,6 @@ other_yes=Sí, des de other_password=Contrasenya d'engegada other_none=Cap other_ename=Falta el nom d'aquesta partició - log_create_image=S'ha creat el nucli $1 log_modify_image=S'ha modificat el nucli $1 log_delete_image=S'ha suprimit el nucli $1 diff --git a/lilo/lang/cs b/lilo/lang/cs index 3f3235164..79f950390 100644 --- a/lilo/lang/cs +++ b/lilo/lang/cs @@ -9,7 +9,6 @@ index_applymsg2=Pouzit tuto kongiguraci na bootovaci sektor na bezne korenove za index_applymsg3=Pred restartovanim PC se presvedcte, ze Vase konfigurace je spravna!! index_return=jadra a oddily index_earch=LILO je podporovano pouze na systemech s x86kovou architekturou - global_title=Globalni nastaveni global_desc=Globalni nastaveni bootovani global_boot=Zapsat LILO @@ -31,10 +30,8 @@ global_extra=Bootovaci jadra s rozsirenymi moznostmi global_any=Kazde bootovani global_secs=sekund global_err=Chyba pri ukladani globalniho nastaveni - apply_title=Pouzit konfiguraci apply_exec=Pouzit konfiguraci LILA s prikazem $1 .. - image_title1=Vytvorit bootovaci jadro image_title2=Editovat bootovaci jadro image_options=Moznosti bootovaciho jadra @@ -65,7 +62,6 @@ image_none=Nic image_ename=Chybi pojmenovani pro toto bootovaci jadro image_ekernel=Image jadra '$1' neexistuje image_einitrd=Inicializace ramdiskoveho souboru '$1' neexistuje - other_title1=Vytvorit bootovaci partisnu other_title2=Editovat bootovaci oddil other_details=Detaily oddilu diff --git a/lilo/lang/cs.auto b/lilo/lang/cs.auto deleted file mode 100644 index 57ba19498..000000000 --- a/lilo/lang/cs.auto +++ /dev/null @@ -1,18 +0,0 @@ -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_lba=Allow booting from beyond 1024 cylinders? - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/da.auto b/lilo/lang/da.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/da.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/de b/lilo/lang/de index 5120dadcb..dfc21d542 100644 --- a/lilo/lang/de +++ b/lilo/lang/de @@ -10,7 +10,6 @@ index_applymsg3=Stellen Sie sicher, dass die Konfiguration korrekt ist, bevor Si index_return=Kernel und Partitionen index_earch=LILO wird nur auf Systemen mit x86-Architektur unterstützt index_econf=Die LILO Konfigurations-Datei $1 existiert nicht. Möglicherweise wird ein anderer 'Boot-Loader' auf Ihrem System benutzt. - global_title=Globale Einstellungen global_desc=Globale Boot-Einstellungen global_boot=Schreibe 'Boot-Loader' auf @@ -33,10 +32,8 @@ global_any=Jegliches Booten global_secs=Sekunden global_lba=Erlaube Booten oberhalb von 1024 Zylindern? global_err=Fehler beim Speichern der globalen Einstellungen - apply_title=Konfiguration anwenden apply_exec=Wende LILO-Konfiguration an mit dem Befehl $1 .. - image_title1=Boot-Kernel erstellen image_title2=Boot-Kernel bearbeiten image_options=Boot-Kernel Einstellungen @@ -67,7 +64,6 @@ image_none=Keines image_ename=Fehlender Name für diesen Kernel image_ekernel=Kernel-Abbild '$1' existiert nicht image_einitrd=Anfängliche RAM-Disk-Datei '$1' existiert nicht - other_title1=Boot-Partition erstellen other_title2=Boot-Partition bearbeiten other_details=Partitionsdetails @@ -78,7 +74,6 @@ other_yes=Ja, von other_password=Boot-Passwort other_none=Keines other_ename=Es fehlt der Name für diese Boot-Partition - log_create_image=Boot-Kernel $1 erzeugt log_modify_image=Boot-Kernel $1 verändert log_delete_image=Boot-Kernel $1 gelöscht diff --git a/lilo/lang/el.auto b/lilo/lang/el.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/el.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/es b/lilo/lang/es index 5c6c15fd2..7578c169b 100644 --- a/lilo/lang/es +++ b/lilo/lang/es @@ -10,7 +10,6 @@ index_applymsg3=¡Asegúrese que su configuración sea correcta antes de reinici index_return=núcleos y particiones index_earch=LILO solo está soportado en sistemas con arquitectura x86 index_econf=El archivo de configuración de LILO $1 no existe. Quizás otro gestor de arranque está siendo usado en su sistema. - global_title=Opciones Globales global_desc=Opciones Globales de Arranque global_boot=Escribir gestor de arranque a @@ -33,10 +32,8 @@ global_any=Cualquier arranque global_secs=segundos global_lba=¿Permitir arranque mas alla de 1024 cilindros? global_err=Fallo al salvar opciones globales - apply_title=Aplicar Configuración apply_exec=Aplicando configuración de LILO con comando $1 .. - image_title1=Crear Núcleo de Arranque image_title2=Editar Núcleo de Arranque image_options=Opciones de Arranque del Núcleo @@ -67,7 +64,6 @@ image_none=Ninguno image_ename=Nombre para este núcleo de arranque no ingresado image_ekernel=La imágen del núcleo '$1' no existe image_einitrd=El archivo ramdisk inicial '$1' no existe - other_title1=Crear Partición de Arranque other_title2=Editar Partición de Arranque other_details=Detalles de la Partición @@ -78,7 +74,6 @@ other_yes=Si, desde other_password=Contraseña de arranque other_none=Ninguna other_ename=Nombre de la partición de arranque no ingresado - log_create_image=Creado núcleo de arranque $1 log_modify_image=Modificado núcleo de arranque $1 log_delete_image=Borrado núcleo de arranque $1 diff --git a/lilo/lang/eu.auto b/lilo/lang/eu.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/eu.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/fa.auto b/lilo/lang/fa.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/fa.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/fi.auto b/lilo/lang/fi.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/fi.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/fr b/lilo/lang/fr index 5200656ce..9f0a534fc 100644 --- a/lilo/lang/fr +++ b/lilo/lang/fr @@ -10,7 +10,6 @@ index_applymsg3=S'assurer que votre configuration est correcte avant de redémar index_return=noyaux et partitions index_earch=LILO est seulement supporté sur les architectures x86 index_econf=Le fichier de configuration de LILO $1 n'existe pas. Il se peut que vous utilisez déjà un autre gestionnaire de démarrage sur votre système. - global_title=Options Globale global_desc=Options Globale de Démarrage global_boot=Écrire le chargeur de démarrage sur @@ -33,10 +32,8 @@ global_any=Tout démarrage global_secs=secondes global_lba=Permettre le démarrage au-delà des 1024 cylindres ? global_err=Impossible de sauvegarder les options globales - apply_title=Appliquer la Configuration apply_exec=Appliquer la configuration LILO avec la commande '$1' - image_title1=Créer un Noyau de Démarrage image_title2=Éditer un Noyau de Démarrage image_options=Options du Noyau de Démarrage @@ -67,7 +64,6 @@ image_none=Aucun image_ename=Nom introuvable pour ce noyau de démarrage image_ekernel=Image du noyau '$1' introuvable image_einitrd=Le fichier disque mémoire initial '$1' n'existe pas - other_title1=Créer une Partition de Démarrage other_title2=Éditer une Partition de Démarrage other_details=Détails sur la Partition @@ -78,7 +74,6 @@ other_yes=Oui, à partir de other_password=Mot de passe au démarrage other_none=Aucune other_ename=Nom introuvable pour cette partition de démarrage - log_create_image=Noyau $1 créé log_modify_image=Noyau $1 modifié log_delete_image=Noyau $1 supprimé diff --git a/lilo/lang/he.auto b/lilo/lang/he.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/he.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/hr.auto b/lilo/lang/hr.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/hr.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/hu b/lilo/lang/hu index bcc460f54..1d66cb980 100644 --- a/lilo/lang/hu +++ b/lilo/lang/hu @@ -9,7 +9,6 @@ index_applymsg2=A jelenlegi beállítások érvényesítése a jelenlegi root es index_applymsg3=Újraindítás előtt győződjön meg arról, hogy a beállítások megfelelőek! index_return=q kernelekhez és partíciókhoz index_earch=LILO csak az x86-os architektúrákat támogatja - global_title=Általános opciók global_desc=Általános boot opciók global_boot=Boot-betöltő kiírása @@ -31,10 +30,8 @@ global_extra=az extra kapcsolókkal behúzott kernelekhez global_any=minden rendszerindulás esetén global_secs=másodpercek global_err=Az általános beállítások elmentése nem sikerült. - apply_title=Beállítások érvényesítése apply_exec=LILO beállítások érvényesítése a(z) $1 paranccsal... - image_title1=Boot kernel létrehozásal image_title2=Boot kernel szerkesztése image_options=Boot Kernel kapcsolók @@ -63,7 +60,6 @@ image_any=minden rendszerindítás esetén image_none=Nincs image_ename=Nincs neve ennek a boot kernelnek. image_ekernel=A(z) '$1' kernel image nem létezik - other_title1=Boot partíció létrehozása other_title2=Boot partíció szerkesztése other_details=Partíció beállítások Details diff --git a/lilo/lang/hu.auto b/lilo/lang/hu.auto deleted file mode 100644 index 997ff589f..000000000 --- a/lilo/lang/hu.auto +++ /dev/null @@ -1,21 +0,0 @@ -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_lba=Allow booting from beyond 1024 cylinders? - -image_initrd=Initial ramdisk file -image_einitrd=Initial ramdisk file '$1' does not exist - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/it.auto b/lilo/lang/it.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/it.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/ja b/lilo/lang/ja index b75e4fede..646d4fe71 100644 --- a/lilo/lang/ja +++ b/lilo/lang/ja @@ -9,7 +9,6 @@ index_applymsg2=現在の root デバイスのブート セクタに現在の設 index_applymsg3=リブートする前に設定が正しいことを確認してください。 index_return=カーネルとパーティション index_earch=LILO は x86 アーキテクチャ システムでのみサポートされます - global_title=グローバル オプション global_desc=グローバル ブート オプション global_boot=ブート ローダを書込み @@ -32,10 +31,8 @@ global_any=不特定でブート global_secs=秒 global_lba=1024 シリンダを超える場合ブートを許可しますか？ global_err=グローバル オプションを保存できませんでした - apply_title=設定を適用 apply_exec=LILO 設定をコマンド $1 で適用中.. - image_title1=ブート カーネルの作成 image_title2=ブート カーネルの編集 image_options=ブート カーネル オプション @@ -66,7 +63,6 @@ image_none=なし image_ename=このブート カーネルの名前がありません image_ekernel=カーネル イメージ '$1' は存在しません image_einitrd=初期 ramdisk ファイル '$1' は存在しません - other_title1=ブート パーティションの作成 other_title2=ブート パーティションの編集 other_details=パーティションの詳細 @@ -77,7 +73,6 @@ other_yes=はい、次から実行 other_password=ブート パスワード other_none=なし other_ename=このブート パーティションの名前がありません - log_create_image=ブート カーネル $1 を作成しました log_modify_image=ブート カーネル $1 を変更しました log_delete_image=ブート カーネル $1 を削除しました diff --git a/lilo/lang/ja.auto b/lilo/lang/ja.auto deleted file mode 100644 index 8aef5e169..000000000 --- a/lilo/lang/ja.auto +++ /dev/null @@ -1 +0,0 @@ -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. diff --git a/lilo/lang/ko b/lilo/lang/ko index df9464eed..ffd671287 100644 --- a/lilo/lang/ko +++ b/lilo/lang/ko @@ -9,7 +9,6 @@ index_applymsg2=현재 루트 장치의 부트 섹터에 현재 구성을 적용 index_applymsg3=재부팅하기 전에 구성이 올바른지 확인하십시오! index_return=커널 및 파티션 index_earch=LILO는 x86 아키텍처 시스템에서만 지원됩니다 - global_title=글로벌 옵션 global_desc=글로벌 부트 옵션 global_boot=부트 로더 쓰기 대상 @@ -32,10 +31,8 @@ global_any=모든 부팅 시 global_secs=초 global_lba=1024 실린더 이상에서 부팅할 수 있습니까? global_err=글로벌 옵션을 저장하지 못했습니다 - apply_title=구성 적용 apply_exec=명령 $1을(를) 사용하여 LILO 구성 적용 중.. - image_title1=부트 커널 작성 image_title2=부트 커널 편집 image_options=부트 커널 옵션 @@ -66,7 +63,6 @@ image_none=없음 image_ename=없는 부트 커널 이름 image_ekernel=커널 이미지 '$1'이(가) 존재하지 않습니다 image_einitrd=초기 ramdisk 파일 '$1'이(가) 존재하지 않습니다 - other_title1=부트 파티션 작성 other_title2=부트 파티션 편집 other_details=파티션 세부 정보 @@ -77,7 +73,6 @@ other_yes=예, 다음으로부터: other_password=부트 암호 other_none=없음 other_ename=없는 부트 파티션 이름 - log_create_image=부트 커널 $1 작성됨 log_modify_image=부트 커널 $1 수정됨 log_delete_image=부트 커널 $1 삭제됨 diff --git a/lilo/lang/ko.auto b/lilo/lang/ko.auto deleted file mode 100644 index 8aef5e169..000000000 --- a/lilo/lang/ko.auto +++ /dev/null @@ -1 +0,0 @@ -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. diff --git a/lilo/lang/lt.auto b/lilo/lang/lt.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/lt.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/lv.auto b/lilo/lang/lv.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/lv.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/ms.auto b/lilo/lang/ms.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/ms.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/mt.auto b/lilo/lang/mt.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/mt.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/nl b/lilo/lang/nl index bfd65e833..6c11d1ae4 100644 --- a/lilo/lang/nl +++ b/lilo/lang/nl @@ -10,7 +10,6 @@ index_applymsg3=Wees er zeker van dat uw configuratie correct is voordat u opnie index_return=kernels and partities index_earch=LILO word alleen ondersteund op x86 architectuur systemen index_econf=De LILO configuratie file $1 bestaat niet. Misschien word er een andere boot lader gebruikt op uw systeem. - global_title=Globale Opties global_desc=Globale Boot Opties global_boot=Schrijf boot lader naar @@ -33,10 +32,8 @@ global_any=Bij iedere boot global_secs=seconden global_lba=Booten toestaan vanaf 1024 cilinders? global_err=Mislukt om globale opties op te slaan - apply_title=Toevoegen Configuratie apply_exec=Toevoegen van de LILO configuratie met de opdracht $1 .. - image_title1=Maak Boot Kernel image_title2=Bewerk Boot Kernel image_options=Boot Kernel Opties @@ -67,7 +64,6 @@ image_none=Niets image_ename=Ontbrekende naam voor deze boot kernel image_ekernel=Kernel image '$1' bestaat niet image_einitrd=Aanvankelijke ramdisk file '$1' bestaat niet - other_title1=Maak Boot Partitie other_title2=Bewerk Boot Partitie other_details=Partitie Details @@ -78,7 +74,6 @@ other_yes=Ja, van other_password=Boot wachtwoord other_none=Niets other_ename=Ontbrekende naam voor deze boot partitie - log_create_image=Gemaakte boot kernel $1 log_modify_image=Gemodificeerde boot kernel $1 log_delete_image=Verwijderde boot kernel $1 diff --git a/lilo/lang/no b/lilo/lang/no index 199b97db1..33ec69614 100644 --- a/lilo/lang/no +++ b/lilo/lang/no @@ -10,7 +10,6 @@ index_applymsg3=Forsikre deg om at konfigurasjonen er korrekt for du omstarter! index_return=kjerner og partisjoner index_earch=LILO støttes bare på x86-baserte systemet index_econf=LILO konfigurasjonsfilen $1 finnes ikke. Kanskje det brukes en annen oppstartslaster på systemet ditt. - global_title=Globale innstillinger global_desc=Globale oppstartsinnstillinger global_boot=Skriv oppstartslaster til @@ -33,10 +32,8 @@ global_any=En hver oppstart global_secs=sekunder global_lba=Tillat oppstart fra utover 1024 sylindere? global_err=Kunne ikke ladre globale oppstartsinnstillinger - apply_title=Bruk konfigurasjon apply_exec=Tar i bruk LILO konfigurasjon med kommandoen $1 .. - image_title1=Opprett oppstarts-kjerne image_title2=Rediger oppstarts-kjerne image_options=Innstillinger for oppstarts-kjerne @@ -67,7 +64,6 @@ image_none=Ingen image_ename=Mangler navn for denne oppstarts-kjernen image_ekernel=Kjerne-bilde '$1' finnes ikke image_einitrd=Initiell ramdisk fil '$1' finnes ikke - other_title1=Opprett oppstartspartisjon other_title2=Rediger oppstartspartisjon other_details=Partisjons detaljer @@ -78,7 +74,6 @@ other_yes=Ja, fra other_password=Oppstart passord other_none=Ingen other_ename=Mangler navn for denne oppstartspartisjonen - log_create_image=Opprettet oppstarts-kjerne $1 log_modify_image=Endret oppstarts-kjerne $1 log_delete_image=Slettet oppstarts-kjerne $1 diff --git a/lilo/lang/pl b/lilo/lang/pl index b594144f8..671ef80ec 100644 --- a/lilo/lang/pl +++ b/lilo/lang/pl @@ -9,7 +9,6 @@ index_applymsg2=Zastosowanie bieżącej konfiguracji do sektora BOOT na bieżąc index_applymsg3=Upewnij się, że konfiguracja jest prawidłowa zanim zrestartujesz system! index_return=kerneli i partycji index_earch=LILO obsługuje jedynie systemy o architekturze x86. - global_title=Opcje ogólne global_desc=Ogólne opcje startowe global_boot=Zapisz bootloader na @@ -32,10 +31,8 @@ global_any=Każdym starcie global_secs=sekund global_lba=Umożliwić start z obszaru powyżej 1024 cylindra? global_err=Nie udało się zachować opcji ogólnych - apply_title=Zastosuj konfigurację apply_exec=Zastosowanie konfiguracji LILO popraez wydanie polecenia $1 .. - image_title1=Określ kernel startowy image_title2=Zmień kernel startowy image_options=Opcje kernela startowego @@ -66,7 +63,6 @@ image_none=Brak image_ename=Nie podano nazwy dla tego kernela. image_ekernel=Obraz kernela '$1' nie istnieje. image_einitrd=Plik inicjalnego ramdysku '$1' nie istnieje. - other_title1=Określ partycję startową other_title2=Zmień partycję startową other_details=Dane partycji @@ -77,7 +73,6 @@ other_yes=Tak, z other_password=Hasło startowe other_none=Brak other_ename=Nie podano nazwy dla tej partycji startowej. - log_create_image=Określono kernel startowy $1 log_modify_image=Zmieniono kernel startowy $1 log_delete_image=Usunięto kernel startowy $1 diff --git a/lilo/lang/pl.auto b/lilo/lang/pl.auto deleted file mode 100644 index 8aef5e169..000000000 --- a/lilo/lang/pl.auto +++ /dev/null @@ -1 +0,0 @@ -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. diff --git a/lilo/lang/pt b/lilo/lang/pt index bac4d5d94..8dc43f454 100644 --- a/lilo/lang/pt +++ b/lilo/lang/pt @@ -8,7 +8,6 @@ index_applymsg1=Aplicar a configuração corrente ao sector de arranque $1. index_applymsg2=Aplicar a configuração corrente ao sector de arranque no dispositivo root corrente. index_applymsg3=Certifique-se que a sua configuração está correcta antes de reiniciar o sistema! index_return=kernels e partições - global_title=Opções Gerais global_desc=Opções Gerais de Arranque global_boot=Escrever o carregador de arranque para @@ -30,10 +29,8 @@ global_extra=Iniciar kernels com opções extra global_any=Qualquer arranque global_secs=segundos global_err=Falha ao guardar as opções gerais - apply_title=Aplicar Configuração apply_exec=A aplicar configuração do LILO com o comando $1 .. - image_title1=Criar Kernel de Arranque image_title2=Editar Kernel de Arranque image_options=Opções do Kernel de Arranque @@ -62,7 +59,6 @@ image_any=Qualquer arranque image_none=Nenhum image_ename=Falta o nome para este kernel de arranque image_ekernel=A imagem do kernel '$1' não existe - other_title1=Criar Partição de Arranque other_title2=Editar Partição de Arranque other_details=Detalhes da Partição diff --git a/lilo/lang/pt.auto b/lilo/lang/pt.auto deleted file mode 100644 index 2fcc0aed4..000000000 --- a/lilo/lang/pt.auto +++ /dev/null @@ -1,22 +0,0 @@ -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_lba=Allow booting from beyond 1024 cylinders? - -image_initrd=Initial ramdisk file -image_einitrd=Initial ramdisk file '$1' does not exist - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/pt_BR.auto b/lilo/lang/pt_BR.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/pt_BR.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/ro.auto b/lilo/lang/ro.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/ro.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/ru b/lilo/lang/ru index 291878816..606a7df3b 100644 --- a/lilo/lang/ru +++ b/lilo/lang/ru @@ -10,7 +10,6 @@ index_applymsg3=Обязательно убедитесь, что конфигу index_return=ядрам и разделам index_earch=LILO поддерживается только на системах с архитектурой x86 index_econf=Файл конфигурации LILO $1 не существует. Возможно, в вашей системе используется другой загрузчик Linux. - global_title=Общие параметры global_desc=Общие параметры загрузки global_boot=Записывать загрузчик в @@ -33,10 +32,8 @@ global_any=Любой загрузки global_secs=секунд global_lba=Разрешать загрузку из области за 1024 цилиндром global_err=Не удалось сохранить общие параметры - apply_title=Применение конфигурации apply_exec=Применение конфигурации LILO с помощью команды $1 .. - image_title1=Добавление ядра для загрузки image_title2=Изменение ядра для загрузки image_options=Настройка загрузки ядра @@ -67,7 +64,6 @@ image_none=Нет image_ename=Не указано имя этого ядра image_ekernel=Образ ядра '$1' не существует image_einitrd=Файл с initial ramdisk '$1' не существует - other_title1=Добавление раздела для загрузки other_title2=Изменение раздела для загрузки other_details=Подробная информация о разделе @@ -78,7 +74,6 @@ other_yes=Да, из other_password=Пароль для загрузки other_none=Нет other_ename=Не указано название этого раздела - log_create_image=Добавлено ядро $1 log_modify_image=Изменены параметры загрузки ядра $1 log_delete_image=Удалено ядро $1 diff --git a/lilo/lang/sk b/lilo/lang/sk index d543a00f0..c8f61e625 100644 --- a/lilo/lang/sk +++ b/lilo/lang/sk @@ -10,7 +10,6 @@ index_applymsg3=Uistite sa správnosťou konfigurácie pred reštartovaním! index_return=jadrá a partície index_earch=LILO je podporované len na architektúre X86 index_econf=Konfiguračný súbor $1 LILO neexistuje. Pravdepodobne používate iný štartovací manažér. - global_title=Globálne nastavenia global_desc=Globálne možnosti bootovania global_boot=Zapísať bootloader do @@ -33,10 +32,8 @@ global_any=Akékoľvek bootovanie global_secs=sekúnd global_lba=Povoliť bootovanie za hranicou 1024 cylindrov? global_err=Zlyhalo uloženie globálnych možností bootovania - apply_title=Uskutočniť zmeny apply_exec=Uskutočňujem zmeny v konfigurácii LILO pomocou príkazu $1 .. - image_title1=Vytvoriť štartovacie jadro image_title2=Upraviť štartovacie jadro image_options=Možnosti bootovaného jadra @@ -67,7 +64,6 @@ image_none=Žiadne image_ename=Chýbajúce meno pre toto jadro image_ekernel=Jadro '$1' neexistuje image_einitrd=Úvodný ramdisk súbor '$1' neexistuje - other_title1=Vytvoriť štartovaciu partíciu other_title2=Upraviť štartovaciu partíciu other_details=Podrobnosti partície @@ -78,7 +74,6 @@ other_yes=Áno, z other_password=Heslo pre štart other_none=Žiadny other_ename=Chýbajúce meno pre túto štartovaciu partíciu - log_create_image=Vytvorené štartovacie jadro $1 log_modify_image=Upravené štartovacie jadro $1 log_delete_image=Zmazané štartovacie jadro $1 diff --git a/lilo/lang/sl.auto b/lilo/lang/sl.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/sl.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/sv b/lilo/lang/sv index de9baae4e..f58de7508 100644 --- a/lilo/lang/sv +++ b/lilo/lang/sv @@ -9,7 +9,6 @@ index_applymsg2=Använd dessa inställningar på startsektorn på aktuell rotdis index_applymsg3=Kontrollera inställningarna innan du startar om! index_return=kärnor och partitioner index_earch=LILO stöds endast av system med x86-arkitektur - global_title=Globala inställningar global_desc=Globala startinställningar global_boot=Skriv boot loader till @@ -31,10 +30,8 @@ global_extra=Startar kärnor med extrainställningar global_any=Startar allt global_secs=sekunder global_err=Det gick inte att spara globala inställningar - apply_title=Ta inställningarna i drift apply_exec=Tar LILO-inställningarna i drift med kommando $1 ... - image_title1=Skapa startkärna image_title2=Ändra startkärna image_options=Inställningar för startkärna @@ -65,7 +62,6 @@ image_none=Inget image_ename=Namn saknas för denna startkärna image_ekernel=Kärn-image '$1' finns inte image_einitrd=Initial RAM-diskfil '$1' finns inte - other_title1=Skapa startpartition other_title2=Ändra startpartition other_details=Uppgifter om partition @@ -76,7 +72,6 @@ other_yes=Ja, från other_password=Startlösenord other_none=Inget other_ename=Namn saknas för denna startpartition - log_create_image=Skapade startkärna $1 log_modify_image=Modifierade startkärna $1 log_delete_image=Tog bort startkärna $1 diff --git a/lilo/lang/sv.auto b/lilo/lang/sv.auto deleted file mode 100644 index 8250b872d..000000000 --- a/lilo/lang/sv.auto +++ /dev/null @@ -1,3 +0,0 @@ -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_lba=Allow booting from beyond 1024 cylinders? diff --git a/lilo/lang/th.auto b/lilo/lang/th.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/th.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/tr b/lilo/lang/tr index f61f1ca98..0cde2b274 100644 --- a/lilo/lang/tr +++ b/lilo/lang/tr @@ -9,7 +9,6 @@ index_applymsg2=Mevcut root aygıtının açılış sektörüne mevcut yapıland index_applymsg3=Makineyi yeniden başlatmadan önce yapılandırmanızın doğru olduğuna emin olunuz! index_return=çekirdek ve disk bölümleri index_earch=LILO sadece x86 mimarisindeki sistemleri destekler - global_title=Genel Seçenekler global_desc=Genel Açılış Seçenekleri global_boot=Açılış yükleyicisini buraya yaz @@ -31,10 +30,8 @@ global_extra=Çekirdekler ekstra seçenekler ile açılıyorsa global_any=Her açılışta global_secs=saniye global_err=Genel seçeneklerin kaydedilmesinde hata oluştu - apply_title=Yapılandırmayı Uygula apply_exec=LILO yapılandırması $1 komutu ile uygulanıyor.. - image_title1=Açılış çekirdeği oluştur image_title2=Açılış çekirdeğini değiştir image_options=Açılış çekirdeği seçenekleri @@ -65,7 +62,6 @@ image_none=Hiçbiri image_ename=Bu çekirdeğin ismi bulunamadı image_ekernel=Çekirdek dosyası '$1' mevcut değil image_einitrd=İlk ramdisk dosyası '$1' mevcut değil - other_title1=Açılış Disk Bölümü oluştur other_title2=Açılış Disk Bölümleriin Değiştir other_details=Disk Bölümü Ayrıntıları @@ -76,7 +72,6 @@ other_yes=Evet, buradadan other_password=Açılış parolası other_none=Hiçbiri other_ename=Bu açılış disk bölümünün ismi bulunamadı - log_create_image=Açılış çekirdeği $1 oluşturuldu log_modify_image=Açılış çekirdeği $1 değiştirildi log_delete_image=Açılış çekirdeği $1 silindi diff --git a/lilo/lang/tr.auto b/lilo/lang/tr.auto deleted file mode 100644 index 8250b872d..000000000 --- a/lilo/lang/tr.auto +++ /dev/null @@ -1,3 +0,0 @@ -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_lba=Allow booting from beyond 1024 cylinders? diff --git a/lilo/lang/uk b/lilo/lang/uk index 88c1f0c23..b62f55931 100644 --- a/lilo/lang/uk +++ b/lilo/lang/uk @@ -1,95 +1,90 @@ -index_title=Настроювання завантаження Linux -index_addk=Додати ядро для завантаження -index_addp=Додати розділ для завантаження -index_global=Настроювання загальних параметрів -index_globalmsg=Настроїти параметри, загальні для всіх ядер і розділів. -index_apply=Застосувати -index_applymsg1=Застосувати поточну конфігурацію до завантажувального сектора на $1. -index_applymsg2=Застосувати поточну конфігурацію до завантажувального сектора пристрою з кореневою файловою системою. -index_applymsg3=Обов'язково переконаєтеся, що конфігурація вірна! -index_return=ядрам і розділам -index_earch=LILO підтримується тільки на системах з архітектурою x86 -index_econf=Файл конфігурації LILO $1 не існує. Можливо, у вашій системі використовується інший завантажник Linux. - -global_title=Загальні параметри -global_desc=Загальні параметри завантаження -global_boot=Записувати завантажник у -global_root=Пристрій з кореневою файловою системою -global_default=Ядро/роздягнув за замовчуванням -global_first=Перший у списку -global_prompt=Показувати запрошення LILO? -global_timeout=Чекати вибору системи користувачем -global_forever=Нескінченно -global_lock=Запам'ятовувати параметри завантаження ядра, зазначені користувачем? -global_delay=Затримка перед завантаженням -global_imm=Відсутній -global_compact=Поєднувати запити на читання? -global_optional=Пропускати неіснуючі ядра? -global_password=Загальний пароль завантаження -global_none=Немає -global_restricted=Пароль потрібно для -global_extra=Завантаження ядер з додатковими параметрами -global_any=Любою завантаження -global_secs=секунд -global_lba=Дозволяти завантаження з області за 1024 циліндром -global_err=Не удалося зберегти загальні параметри - -apply_title=Застосування конфігурації -apply_exec=Застосування конфігурації LILO за допомогою команди $1 .. - -image_title1=Додавання ядра для завантаження -image_title2=Зміна ядра для завантаження -image_options=Настроювання завантаження ядра -image_name=Назва -image_kernel=Ядро для завантаження -image_opts=Параметри завантаження ядра -image_default=За замовчуванням -image_add=Додати.. -image_replace=Замінити.. -image_root=Пристрій з кореневою файловою системою -image_fromkern=З ядра -image_rcurr=Поточне -image_rdev=Пристрій .. -image_initrd=Файл c initial ramdisk -image_mode=Режим монтування кореневої файлової системи -image_ro=Тільки для читання -image_rw=Для читання/запису -image_vga=Текстовий режим VGA -image_ask=Запитувати користувача -image_other=Інший -image_lock=Запам'ятовувати параметри завантаження ядра, зазначені користувачем? -image_optional=Пропускати неіснуючі ядра? -image_password=Пароль для завантаження -image_restricted=Пароль потрібно для -image_extra=Завантаження ядра з додатковими параметрами -image_any=Любою завантаження -image_none=Немає -image_ename=Не зазначене ім'я цього ядра -image_ekernel=Образ ядра '$1' не існує -image_einitrd=Файл із initial ramdisk '$1' не існує - -other_title1=Додавання роздягнула для завантаження -other_title2=Зміна роздягнула для завантаження -other_details=Докладна інформація про розділ -other_name=Назва -other_part=Роздягнув для завантаження -other_pass=Передавати таблицю розділів операційній системі? -other_yes=Так, з -other_password=Пароль для завантаження -other_none=Немає -other_ename=Не зазначена назва цього розділу - -log_create_image=Додане ядро $1 -log_modify_image=Змінені параметри завантаження ядра $1 -log_delete_image=Вилучене ядро $1 -log_create_image_l=Додане ядро $1 для $2 -log_modify_image_l=Змінені параметри завантаження ядра $1 для $2 -log_delete_image_l=Вилучене ядро $1 для $2 -log_create_other=Доданий розділ $1 -log_modify_other=Змінені параметри роздягнула $1 -log_delete_other=Вилучений розділ $1 -log_create_other_l=Доданий розділ $1 для $2 -log_modify_other_l=Змінені параметри роздягнула $1 для $2 -log_delete_other_l=Вилучений розділ $1 для $2 -log_apply=Конфігурація застосована -log_global=Змінені загальні настроювання +index_title=Настроювання завантаження Linux +index_addk=Додати ядро для завантаження +index_addp=Додати розділ для завантаження +index_global=Настроювання загальних параметрів +index_globalmsg=Настроїти параметри, загальні для всіх ядер і розділів. +index_apply=Застосувати +index_applymsg1=Застосувати поточну конфігурацію до завантажувального сектора на $1. +index_applymsg2=Застосувати поточну конфігурацію до завантажувального сектора пристрою з кореневою файловою системою. +index_applymsg3=Обов'язково переконаєтеся, що конфігурація вірна! +index_return=ядрам і розділам +index_earch=LILO підтримується тільки на системах з архітектурою x86 +index_econf=Файл конфігурації LILO $1 не існує. Можливо, у вашій системі використовується інший завантажник Linux. +global_title=Загальні параметри +global_desc=Загальні параметри завантаження +global_boot=Записувати завантажник у +global_root=Пристрій з кореневою файловою системою +global_default=Ядро/роздягнув за замовчуванням +global_first=Перший у списку +global_prompt=Показувати запрошення LILO? +global_timeout=Чекати вибору системи користувачем +global_forever=Нескінченно +global_lock=Запам'ятовувати параметри завантаження ядра, зазначені користувачем? +global_delay=Затримка перед завантаженням +global_imm=Відсутній +global_compact=Поєднувати запити на читання? +global_optional=Пропускати неіснуючі ядра? +global_password=Загальний пароль завантаження +global_none=Немає +global_restricted=Пароль потрібно для +global_extra=Завантаження ядер з додатковими параметрами +global_any=Любою завантаження +global_secs=секунд +global_lba=Дозволяти завантаження з області за 1024 циліндром +global_err=Не удалося зберегти загальні параметри +apply_title=Застосування конфігурації +apply_exec=Застосування конфігурації LILO за допомогою команди $1 .. +image_title1=Додавання ядра для завантаження +image_title2=Зміна ядра для завантаження +image_options=Настроювання завантаження ядра +image_name=Назва +image_kernel=Ядро для завантаження +image_opts=Параметри завантаження ядра +image_default=За замовчуванням +image_add=Додати.. +image_replace=Замінити.. +image_root=Пристрій з кореневою файловою системою +image_fromkern=З ядра +image_rcurr=Поточне +image_rdev=Пристрій .. +image_initrd=Файл c initial ramdisk +image_mode=Режим монтування кореневої файлової системи +image_ro=Тільки для читання +image_rw=Для читання/запису +image_vga=Текстовий режим VGA +image_ask=Запитувати користувача +image_other=Інший +image_lock=Запам'ятовувати параметри завантаження ядра, зазначені користувачем? +image_optional=Пропускати неіснуючі ядра? +image_password=Пароль для завантаження +image_restricted=Пароль потрібно для +image_extra=Завантаження ядра з додатковими параметрами +image_any=Любою завантаження +image_none=Немає +image_ename=Не зазначене ім'я цього ядра +image_ekernel=Образ ядра '$1' не існує +image_einitrd=Файл із initial ramdisk '$1' не існує +other_title1=Додавання роздягнула для завантаження +other_title2=Зміна роздягнула для завантаження +other_details=Докладна інформація про розділ +other_name=Назва +other_part=Роздягнув для завантаження +other_pass=Передавати таблицю розділів операційній системі? +other_yes=Так, з +other_password=Пароль для завантаження +other_none=Немає +other_ename=Не зазначена назва цього розділу +log_create_image=Додане ядро $1 +log_modify_image=Змінені параметри завантаження ядра $1 +log_delete_image=Вилучене ядро $1 +log_create_image_l=Додане ядро $1 для $2 +log_modify_image_l=Змінені параметри завантаження ядра $1 для $2 +log_delete_image_l=Вилучене ядро $1 для $2 +log_create_other=Доданий розділ $1 +log_modify_other=Змінені параметри роздягнула $1 +log_delete_other=Вилучений розділ $1 +log_create_other_l=Доданий розділ $1 для $2 +log_modify_other_l=Змінені параметри роздягнула $1 для $2 +log_delete_other_l=Вилучений розділ $1 для $2 +log_apply=Конфігурація застосована +log_global=Змінені загальні настроювання diff --git a/lilo/lang/ur.auto b/lilo/lang/ur.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/ur.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/vi.auto b/lilo/lang/vi.auto deleted file mode 100644 index 248f7e8b6..000000000 --- a/lilo/lang/vi.auto +++ /dev/null @@ -1,95 +0,0 @@ -index_title=Linux Bootup Configuration -index_addk=Create a new boot kernel -index_addp=Create a new boot partition -index_global=Edit Global Options -index_globalmsg=Edit global bootup options that apply to all kernels and partitions. -index_apply=Apply Configuration -index_applymsg1=Apply the current configuration to the boot sector on $1. -index_applymsg2=Apply the current configuration to the boot sector on the current root device. -index_applymsg3=Make sure your configuration is correct before rebooting! -index_return=kernels and partitions -index_earch=LILO is only supported on x86 architecture systems -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_title=Global Options -global_desc=Global Boot Options -global_boot=Write boot loader to -global_root=Root device -global_default=Default kernel/partition -global_first=First in list -global_prompt=Display LILO prompt? -global_timeout=Time to wait at LILO prompt -global_forever=Forever -global_lock=Remember user kernel options? -global_delay=Time to wait before booting -global_imm=Immediate -global_compact=Merge read requests? -global_optional=Skip kernels that do not exist? -global_password=Default boot password -global_none=None -global_restricted=Password needed for -global_extra=Booting kernels with extra options -global_any=Any booting -global_secs=seconds -global_lba=Allow booting from beyond 1024 cylinders? -global_err=Failed to save global options - -apply_title=Apply Configuration -apply_exec=Applying LILO configuration with command $1 .. - -image_title1=Create Boot Kernel -image_title2=Edit Boot Kernel -image_options=Boot Kernel Options -image_name=Name -image_kernel=Kernel to boot -image_opts=Kernel options -image_default=Default -image_add=Add options.. -image_replace=Replace options.. -image_root=Root device -image_fromkern=From kernel -image_rcurr=Current root -image_rdev=Device .. -image_initrd=Initial ramdisk file -image_mode=Root mount mode -image_ro=Read-only -image_rw=Read-write -image_vga=VGA text mode -image_ask=Ask user -image_other=Other -image_lock=Remember user kernel options? -image_optional=Skip kernels that do not exist? -image_password=Boot password -image_restricted=Password needed for -image_extra=Booting kernels with extra options -image_any=Any booting -image_none=None -image_ename=Missing name for this boot kernel -image_ekernel=Kernel image '$1' does not exist -image_einitrd=Initial ramdisk file '$1' does not exist - -other_title1=Create Boot Partition -other_title2=Edit Boot Partition -other_details=Partition Details -other_name=Name -other_part=Partition to boot -other_pass=Pass partition table to OS? -other_yes=Yes, from -other_password=Boot password -other_none=None -other_ename=Missing name for this boot partition - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/lilo/lang/zh b/lilo/lang/zh index 5d03dabef..176f5274d 100644 --- a/lilo/lang/zh +++ b/lilo/lang/zh @@ -9,7 +9,6 @@ index_applymsg2=在当前根设备的引导扇区应用当前配置 index_applymsg3=在重新启动机器前, 请确认您的配置是否正确! index_return=内核和分区 index_earch=只有X86体系结构的系统支持LILO - global_title=全局参选项 global_desc=全局启动选项 global_boot=将启动装载器写到 @@ -31,10 +30,8 @@ global_extra=用额外的选项启动内核 global_any=任何引导 global_secs=秒 global_err=保存全局选项失败 - apply_title=应用配置 apply_exec=使用$1命令应用LILO配置.. - image_title1=创建引导内核 image_title2=编辑引导内核 image_options=引导内核选项 @@ -65,7 +62,6 @@ image_none=无 image_ename=此引导内核名丢失 image_ekernel=内核映像'$1'不存在 image_einitrd=初始 ramdisk 文件 '$1' 不存在 - other_title1=创建启动分区 other_title2=编辑启动分区 other_details=分区详情 @@ -76,7 +72,6 @@ other_yes=是，来自 other_password=启动口令 other_none=无 other_ename=此引导分区名称丢失 - log_create_image=创建引导内核$1 log_modify_image=修改引导内核$1 log_delete_image=删除引导内核$1 diff --git a/lilo/lang/zh.auto b/lilo/lang/zh.auto deleted file mode 100644 index 8250b872d..000000000 --- a/lilo/lang/zh.auto +++ /dev/null @@ -1,3 +0,0 @@ -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_lba=Allow booting from beyond 1024 cylinders? diff --git a/lilo/lang/zh_TW b/lilo/lang/zh_TW index 64709f3d2..19e4eff6b 100644 --- a/lilo/lang/zh_TW +++ b/lilo/lang/zh_TW @@ -9,7 +9,6 @@ index_applymsg2=套用目前的組態到目前根目錄設備的開機磁區. index_applymsg3=再重新開機前傾確認您的組態是正確的! index_return=核心與分割區 index_earch=LILO 之支援在 x86 的系統上面 - global_title=全域選項 global_desc=全域開機選項 global_boot=將開機載入器寫入到 @@ -31,10 +30,8 @@ global_extra=含有額外選項的開機核心 global_any=任何啟動 global_secs=秒 global_err=無法儲存全域選項 - apply_title=套用組態 apply_exec=以命令 $1 套用 LILO 組態檔中... - image_title1=建立開機核心 image_title2=編輯開機核心 image_options=開機核心選項 @@ -65,7 +62,6 @@ image_none=無 image_ename=遺失給這個開機核心的名稱 image_ekernel=核心影像檔 '$1' 不存在 image_einitrd=起始記憶體磁碟檔案 '$1' 不存在 - other_title1=建立開機分割區 other_title2=編輯開機分割區 other_details=分割區詳細資料 diff --git a/lilo/lang/zh_TW.auto b/lilo/lang/zh_TW.auto deleted file mode 100644 index 57ba19498..000000000 --- a/lilo/lang/zh_TW.auto +++ /dev/null @@ -1,18 +0,0 @@ -index_econf=The LILO configuration file $1 does not exist. Maybe another boot loader is being used on your system. - -global_lba=Allow booting from beyond 1024 cylinders? - -log_create_image=Created boot kernel $1 -log_modify_image=Modified boot kernel $1 -log_delete_image=Deleted boot kernel $1 -log_create_image_l=Created boot kernel $1 for $2 -log_modify_image_l=Modified boot kernel $1 for $2 -log_delete_image_l=Deleted boot kernel $1 for $2 -log_create_other=Created boot partition $1 -log_modify_other=Modified boot partition $1 -log_delete_other=Deleted boot partition $1 -log_create_other_l=Created boot partition $1 on $2 -log_modify_other_l=Modified boot partition $1 on $2 -log_delete_other_l=Deleted boot partition $1 on $2 -log_apply=Applied configuration -log_global=Changed global options diff --git a/link/lang/af.auto b/link/lang/af.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/af.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/ar.auto b/link/lang/ar.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/ar.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/be.auto b/link/lang/be.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/be.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/bg.auto b/link/lang/bg.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/bg.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/ca.auto b/link/lang/ca.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/ca.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/cs.auto b/link/lang/cs.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/cs.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/da.auto b/link/lang/da.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/da.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/de b/link/lang/de index cc98db99a..ce5a0a128 100644 --- a/link/lang/de +++ b/link/lang/de @@ -3,4 +3,4 @@ index_econfig=Keine URL zum Verlinken wurde konfiguriert. Klicken S index_evirtualmin=Die URL enthält Virtualmin-spezifische Variablen, aber es wurde kein Server für den aktuellen Benutzer gefunden. acl_link=Umleitung zur URL -acl_elink=Fehlende URL zur Umleitung +acl_elink=Fehlende URL zur Umleitung \ No newline at end of file diff --git a/link/lang/el.auto b/link/lang/el.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/el.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/es.auto b/link/lang/es.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/es.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/eu.auto b/link/lang/eu.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/eu.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/fa.auto b/link/lang/fa.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/fa.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/fi.auto b/link/lang/fi.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/fi.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/fr.auto b/link/lang/fr.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/fr.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/he.auto b/link/lang/he.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/he.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/hr.auto b/link/lang/hr.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/hr.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/hu.auto b/link/lang/hu.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/hu.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/it.auto b/link/lang/it.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/it.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/ko.auto b/link/lang/ko.auto deleted file mode 100644 index 4c290f92c..000000000 --- a/link/lang/ko.auto +++ /dev/null @@ -1,5 +0,0 @@ -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/lt.auto b/link/lang/lt.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/lt.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/lv.auto b/link/lang/lv.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/lv.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/ms.auto b/link/lang/ms.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/ms.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/mt.auto b/link/lang/mt.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/mt.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/nl.auto b/link/lang/nl.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/nl.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/no.auto b/link/lang/no.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/no.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/pl.auto b/link/lang/pl.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/pl.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/pt.auto b/link/lang/pt.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/pt.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/pt_BR.auto b/link/lang/pt_BR.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/pt_BR.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/ro.auto b/link/lang/ro.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/ro.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/ru.auto b/link/lang/ru.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/ru.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/sk.auto b/link/lang/sk.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/sk.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/sl.auto b/link/lang/sl.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/sl.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/sv.auto b/link/lang/sv.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/sv.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/th.auto b/link/lang/th.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/th.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/tr.auto b/link/lang/tr.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/tr.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/uk.auto b/link/lang/uk.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/uk.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/ur.auto b/link/lang/ur.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/ur.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/vi.auto b/link/lang/vi.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/vi.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/zh.auto b/link/lang/zh.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/zh.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/link/lang/zh_TW.auto b/link/lang/zh_TW.auto deleted file mode 100644 index 71b0935ac..000000000 --- a/link/lang/zh_TW.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=Custom Link -index_econfig=No URL to link to has been configured. Click here to specify a URL. -index_evirtualmin=The URL contains Virtualmin-specific variables, but no server was found for the current user. - -acl_link=Redirect to URL -acl_elink=Missing URL to redirect to diff --git a/logrotate/lang/af.auto b/logrotate/lang/af.auto index 3d8e24643..9f341d511 100644 --- a/logrotate/lang/af.auto +++ b/logrotate/lang/af.auto @@ -64,7 +64,6 @@ edit_pre=Opdragte om te draai voor rotasie edit_default=Standaard ($1) edit_sharedscripts=Voer slegs skripte een keer vir alle lêers uit? edit_now=Draai nou -edit_clone=Clone global_title=Wêreldwye opsies global_header=Standaardopsies vir alle loglêers diff --git a/logrotate/lang/ar.auto b/logrotate/lang/ar.auto index 93f622682..cf7e57c47 100644 --- a/logrotate/lang/ar.auto +++ b/logrotate/lang/ar.auto @@ -64,7 +64,6 @@ edit_pre=أوامر للتشغيل قبل التدوير edit_default=افتراضي ($1) edit_sharedscripts=تشغيل البرامج النصية مرة واحدة فقط لكافة الملفات؟ edit_now=استدر الآن -edit_clone=Clone global_title=الخيارات العالمية global_header=الخيارات الافتراضية لجميع ملفات السجل diff --git a/logrotate/lang/be.auto b/logrotate/lang/be.auto index 8a4bff2a6..75246ec3e 100644 --- a/logrotate/lang/be.auto +++ b/logrotate/lang/be.auto @@ -64,7 +64,6 @@ edit_pre=Каманды для выканання перад кручэннем edit_default=Па змаўчанні ($1) edit_sharedscripts=Запускаць сцэнарыі адзін раз для ўсіх файлаў? edit_now=Павярніце зараз -edit_clone=Clone global_title=Глабальныя параметры global_header=Параметры па змаўчанні для ўсіх часопісаў diff --git a/logrotate/lang/bg.auto b/logrotate/lang/bg.auto index da6113933..0b33cf421 100644 --- a/logrotate/lang/bg.auto +++ b/logrotate/lang/bg.auto @@ -64,7 +64,6 @@ edit_pre=Команди, които да се изпълняват преди з edit_default=По подразбиране ($1) edit_sharedscripts=Да се пускат ли скриптове само веднъж за всички файлове? edit_now=Завъртете сега -edit_clone=Clone global_title=Глобални опции global_header=Опции по подразбиране за всички лог файлове diff --git a/logrotate/lang/ca.auto b/logrotate/lang/ca.auto deleted file mode 100644 index 65a04ce3c..000000000 --- a/logrotate/lang/ca.auto +++ /dev/null @@ -1 +0,0 @@ -edit_clone=Clone diff --git a/logrotate/lang/cs.auto b/logrotate/lang/cs.auto index 1582c33ff..79fd41585 100644 --- a/logrotate/lang/cs.auto +++ b/logrotate/lang/cs.auto @@ -3,7 +3,6 @@ period_bytes=bajtů edit_minsize=Minimální velikost pro otáčení edit_nominsize=Vždy edit_dateext=Pro rotované soubory použijte příponu data -edit_clone=Clone save_eminsize=Chybějící nebo neplatná minimální velikost save_enofiles=Nebyly zadány žádné soubory pro otáčení diff --git a/logrotate/lang/da.auto b/logrotate/lang/da.auto index 2bc91865f..31cc28add 100644 --- a/logrotate/lang/da.auto +++ b/logrotate/lang/da.auto @@ -64,7 +64,6 @@ edit_pre=Kommandoer, der skal køres inden rotation edit_default=Standard ($1) edit_sharedscripts=Kun køre scripts én gang for alle filer? edit_now=Drej nu -edit_clone=Clone global_title=Globale indstillinger global_header=Standardindstillinger for alle logfiler diff --git a/logrotate/lang/de b/logrotate/lang/de index 28affba9b..25643d4ab 100644 --- a/logrotate/lang/de +++ b/logrotate/lang/de @@ -113,4 +113,4 @@ force_done=.. erledigt. force_failed=.. fehlgeschlagen! Siehe die obige Ausgabe für den Grund. delete_err=Fehler beim Löschen der Logs -delete_enone=Keine ausgewählt +delete_enone=Keine ausgewählt \ No newline at end of file diff --git a/logrotate/lang/el.auto b/logrotate/lang/el.auto index 0c8ea15c5..d2986b44e 100644 --- a/logrotate/lang/el.auto +++ b/logrotate/lang/el.auto @@ -64,7 +64,6 @@ edit_pre=Εντολές για εκτέλεση πριν από την περι edit_default=Προεπιλογή ($1) edit_sharedscripts=Εκτελείτε μόνο δέσμες ενεργειών μία φορά για όλα τα αρχεία; edit_now=Περιστροφή τώρα -edit_clone=Clone global_title=Γενικές επιλογές global_header=Προεπιλεγμένες επιλογές για όλα τα αρχεία καταγραφής diff --git a/logrotate/lang/es.auto b/logrotate/lang/es.auto index 237ff931c..828cf546a 100644 --- a/logrotate/lang/es.auto +++ b/logrotate/lang/es.auto @@ -5,7 +5,6 @@ period_bytes=bytes edit_minsize=Tamaño mínimo para rotar edit_nominsize=Siempre edit_dateext=Usar extensión de fecha para archivos rotados -edit_clone=Clone save_eminsize=Tamaño mínimo faltante o no válido save_enofiles=No hay archivos para rotar ingresados diff --git a/logrotate/lang/eu.auto b/logrotate/lang/eu.auto index dfb737310..90b856a43 100644 --- a/logrotate/lang/eu.auto +++ b/logrotate/lang/eu.auto @@ -64,7 +64,6 @@ edit_pre=Biraketa aurretik exekutatzeko komandoak edit_default=Lehenespenez ($1) edit_sharedscripts=Gidoiak bakarrik exekutatu fitxategi guztientzako? edit_now=Biratu Orain -edit_clone=Clone global_title=Aukera Globala global_header=Lehenetsitako erregistro-fitxategi guztien aukera diff --git a/logrotate/lang/fa.auto b/logrotate/lang/fa.auto index 97406a66f..602798ea5 100644 --- a/logrotate/lang/fa.auto +++ b/logrotate/lang/fa.auto @@ -64,7 +64,6 @@ edit_pre=دستورات قبل از چرخش اجرا شود edit_default=پیش فرض ($1) edit_sharedscripts=فقط اسکریپت ها را یک بار برای همه پرونده ها اجرا کنید؟ edit_now=چرخش اکنون -edit_clone=Clone global_title=گزینه های جهانی global_header=گزینه های پیش فرض برای همه پرونده های ورود به سیستم diff --git a/logrotate/lang/fi.auto b/logrotate/lang/fi.auto index cbbf2a07f..d04839f0e 100644 --- a/logrotate/lang/fi.auto +++ b/logrotate/lang/fi.auto @@ -64,7 +64,6 @@ edit_pre=Komennot ajaa ennen kiertoa edit_default=Oletus ($1) edit_sharedscripts=Suoritako kaikkien tiedostojen skriptit vain kerran? edit_now=Kierrä nyt -edit_clone=Clone global_title=Globaalit vaihtoehdot global_header=Kaikkien lokitiedostojen oletusasetukset diff --git a/logrotate/lang/fr.auto b/logrotate/lang/fr.auto index 2e64f4aa0..668b84ece 100644 --- a/logrotate/lang/fr.auto +++ b/logrotate/lang/fr.auto @@ -4,7 +4,6 @@ edit_minsize=Taille minimale à faire pivoter edit_nominsize=Toujours edit_dateext=Utiliser l'extension de date pour les fichiers pivotés edit_default=Par défaut ($1) -edit_clone=Clone save_eminsize=Taille minimale manquante ou invalide save_enofiles=Aucun fichier à faire pivoter entré diff --git a/logrotate/lang/he.auto b/logrotate/lang/he.auto index a99bde82b..7af1efaad 100644 --- a/logrotate/lang/he.auto +++ b/logrotate/lang/he.auto @@ -64,7 +64,6 @@ edit_pre=פקודות להפעלה לפני סיבוב edit_default=ברירת מחדל ($1) edit_sharedscripts=רק להריץ סקריפטים פעם אחת לכל הקבצים? edit_now=סובב עכשיו -edit_clone=Clone global_title=אופציות עולמיות global_header=אפשרויות ברירת מחדל עבור כל קבצי היומן diff --git a/logrotate/lang/hr.auto b/logrotate/lang/hr.auto index 6af54fccd..55b763006 100644 --- a/logrotate/lang/hr.auto +++ b/logrotate/lang/hr.auto @@ -64,7 +64,6 @@ edit_pre=Naredbe za pokretanje prije rotacije edit_default=Zadano ($1) edit_sharedscripts=Samo skripte pokrenuti samo jednom za sve datoteke? edit_now=Zakreni odmah -edit_clone=Clone global_title=Opcije global_header=Zadane opcije za sve datoteke dnevnika diff --git a/logrotate/lang/hu.auto b/logrotate/lang/hu.auto index f3e32d3d1..11b6721c3 100644 --- a/logrotate/lang/hu.auto +++ b/logrotate/lang/hu.auto @@ -1,7 +1,6 @@ edit_minsize=A forgatás minimális mérete edit_nominsize=Mindig edit_dateext=Használja a dátumhosszabbítást az elforgatott fájlokhoz -edit_clone=Clone save_eminsize=Hiányzik vagy érvénytelen a minimális méret save_enofiles=Nincs megadva elforgatható fájl diff --git a/logrotate/lang/it.auto b/logrotate/lang/it.auto index 99e346cee..481897eed 100644 --- a/logrotate/lang/it.auto +++ b/logrotate/lang/it.auto @@ -64,7 +64,6 @@ edit_pre=Comandi da eseguire prima della rotazione edit_default=Predefinito ($1) edit_sharedscripts=Eseguire gli script una sola volta per tutti i file? edit_now=Ruota ora -edit_clone=Clone global_title=Opzioni globali global_header=Opzioni predefinite per tutti i file di registro diff --git a/logrotate/lang/ja.auto b/logrotate/lang/ja.auto index d80027cab..5cad544d4 100644 --- a/logrotate/lang/ja.auto +++ b/logrotate/lang/ja.auto @@ -1,7 +1,6 @@ edit_minsize=回転する最小サイズ edit_nominsize=常に edit_dateext=回転したファイルに日付の拡張子を使用する -edit_clone=Clone save_eminsize=最小サイズがないか無効です save_enofiles=回転するファイルが入力されていません diff --git a/logrotate/lang/ko.auto b/logrotate/lang/ko.auto index 1b5a579e2..008a60d31 100644 --- a/logrotate/lang/ko.auto +++ b/logrotate/lang/ko.auto @@ -1,7 +1,6 @@ edit_minsize=회전 할 최소 크기 edit_nominsize=항상 edit_dateext=회전 된 파일에 날짜 확장명 사용 -edit_clone=Clone save_eminsize=최소 크기가 없거나 유효하지 않습니다 save_enofiles=회전 할 파일이 입력되지 않았습니다 diff --git a/logrotate/lang/lt.auto b/logrotate/lang/lt.auto index 9793724d1..5f25fceb0 100644 --- a/logrotate/lang/lt.auto +++ b/logrotate/lang/lt.auto @@ -64,7 +64,6 @@ edit_pre=Komandos turi bėgti prieš sukimąsi edit_default=Numatytasis ($1) edit_sharedscripts=Tik paleiskite visų failų scenarijus vieną kartą? edit_now=Sukti dabar -edit_clone=Clone global_title=Visuotinės parinktys global_header=Numatytosios visų žurnalo failų parinktys diff --git a/logrotate/lang/lv.auto b/logrotate/lang/lv.auto index bc6bc1fc5..a40d6e5c0 100644 --- a/logrotate/lang/lv.auto +++ b/logrotate/lang/lv.auto @@ -64,7 +64,6 @@ edit_pre=Komandas palaist pirms rotācijas edit_default=Noklusējums ($1) edit_sharedscripts=Vai visiem failiem palaist skriptus tikai vienu reizi? edit_now=Pagriezt tūlīt -edit_clone=Clone global_title=Globālās iespējas global_header=Visu žurnālfailu noklusējuma opcijas diff --git a/logrotate/lang/ms.auto b/logrotate/lang/ms.auto index 7b519719c..677df345e 100644 --- a/logrotate/lang/ms.auto +++ b/logrotate/lang/ms.auto @@ -64,7 +64,6 @@ edit_pre=Perintah untuk dijalankan sebelum putaran edit_default=Lalai ($1) edit_sharedscripts=Hanya jalankan skrip sekali untuk semua fail? edit_now=Putar Sekarang -edit_clone=Clone global_title=Pilihan Global global_header=Pilihan lalai untuk semua fail log diff --git a/logrotate/lang/mt.auto b/logrotate/lang/mt.auto index 4a2412814..3d128d8a2 100644 --- a/logrotate/lang/mt.auto +++ b/logrotate/lang/mt.auto @@ -64,7 +64,6 @@ edit_pre=Kmandi biex jimxu qabel ir-rotazzjoni edit_default=Default ($1) edit_sharedscripts=Ħaddem skripts darba biss għall-fajls kollha? edit_now=Dawwar Issa -edit_clone=Clone global_title=Għażliet Globali global_header=Għażliet awtomatiċi għall-fajls kollha tal-ġurnal diff --git a/logrotate/lang/nl.auto b/logrotate/lang/nl.auto index 36dc857f8..45a0ceac7 100644 --- a/logrotate/lang/nl.auto +++ b/logrotate/lang/nl.auto @@ -1,7 +1,6 @@ edit_minsize=Minimale grootte om te draaien edit_nominsize=Altijd edit_dateext=Gebruik datum-extensie voor geroteerde bestanden -edit_clone=Clone save_eminsize=Ontbrekende of ongeldige minimumgrootte save_enofiles=Geen bestanden om te roteren ingevoerd diff --git a/logrotate/lang/no.auto b/logrotate/lang/no.auto deleted file mode 100644 index 65a04ce3c..000000000 --- a/logrotate/lang/no.auto +++ /dev/null @@ -1 +0,0 @@ -edit_clone=Clone diff --git a/logrotate/lang/pl.auto b/logrotate/lang/pl.auto deleted file mode 100644 index 65a04ce3c..000000000 --- a/logrotate/lang/pl.auto +++ /dev/null @@ -1 +0,0 @@ -edit_clone=Clone diff --git a/logrotate/lang/pt.auto b/logrotate/lang/pt.auto index 679281179..2f2ac116f 100644 --- a/logrotate/lang/pt.auto +++ b/logrotate/lang/pt.auto @@ -64,7 +64,6 @@ edit_pre=Comandos a serem executados antes da rotação edit_default=Padrão ($1) edit_sharedscripts=Executar scripts apenas uma vez para todos os arquivos? edit_now=Rodar agora -edit_clone=Clone global_title=Opções Globais global_header=Opções padrão para todos os arquivos de log diff --git a/logrotate/lang/pt_BR.auto b/logrotate/lang/pt_BR.auto index 679281179..2f2ac116f 100644 --- a/logrotate/lang/pt_BR.auto +++ b/logrotate/lang/pt_BR.auto @@ -64,7 +64,6 @@ edit_pre=Comandos a serem executados antes da rotação edit_default=Padrão ($1) edit_sharedscripts=Executar scripts apenas uma vez para todos os arquivos? edit_now=Rodar agora -edit_clone=Clone global_title=Opções Globais global_header=Opções padrão para todos os arquivos de log diff --git a/logrotate/lang/ro.auto b/logrotate/lang/ro.auto index 717ac7fa6..9e3b45704 100644 --- a/logrotate/lang/ro.auto +++ b/logrotate/lang/ro.auto @@ -64,7 +64,6 @@ edit_pre=Comenzile de executat înainte de rotație edit_default=Implicit ($1) edit_sharedscripts=Rulează scripturi doar o dată pentru toate fișierele? edit_now=Rotiți acum -edit_clone=Clone global_title=Opțiuni globale global_header=Opțiuni implicite pentru toate fișierele jurnal diff --git a/logrotate/lang/ru b/logrotate/lang/ru index 691e36fe5..a37a957a7 100644 --- a/logrotate/lang/ru +++ b/logrotate/lang/ru @@ -114,3 +114,5 @@ force_failed=.. не выполнено! Смотрите вывод выше, delete_err=Не удалось удалить журналы delete_enone=Ничего не выбрано + +__norefs=1 diff --git a/logrotate/lang/ru.auto b/logrotate/lang/ru.auto new file mode 100644 index 000000000..7b9840a72 --- /dev/null +++ b/logrotate/lang/ru.auto @@ -0,0 +1,115 @@ +index_title=Вращение файла журнала +index_econf=Файл конфигурации ротации журналов $1 не найден в вашей системе. Возможно, logrotate не установлен или конфигурация модуля неверна. +index_ecmd=Программа ротации журналов $1 не найдена в вашей системе. Возможно, он не установлен или конфигурация модуля неверна. +index_eversion=Не удалось получить версию logrotate с помощью команды $1 : $2 +index_version=Logrotate версия $1 +index_add=Добавить новый файл журнала для поворота. +index_file=Лог-файл +index_period=Период вращения +index_post=Команда после вращения +index_none=Файлы журнала еще не определены. +index_global=Изменить глобальные параметры +index_globaldesc=Нажмите эту кнопку, чтобы изменить настройки, применимые ко всем файлам журналов, и определить значения по умолчанию для журналов. +index_sched=Изменить расписание +index_scheddesc=Нажмите эту кнопку, чтобы изменить расписание запуска logrotate в Cron или включить или отключить его. +index_nocmd=Никто +index_notset=Не установлено +index_return=список файлов журнала +index_force=Force Log Rotation +index_forcedesc=Принудительное немедленное вращение всех файлов журнала, даже если это еще не время. +index_logrotate=Logrotate +index_delete=Удалить выбранные вращения журнала + +period_daily=Ежедневно +period_weekly=еженедельно +period_monthly=ежемесячно +period_never=Никогда +period_bytes=байтов + +edit_title1=Изменить файл журнала +edit_title2=Создать файл журнала +edit_header=Повернутые данные файла журнала +edit_file=Пути к файлам журналов +edit_sched=График ротации +edit_rotate=Количество старых журналов, чтобы сохранить +edit_compress=Сжатие старых файлов журнала? +edit_delaycompress=Задержка сжатия до следующего цикла? +edit_copytruncate=Усечь файл журнала на месте? +edit_ifempty=Поворот, даже если файл журнала пуст? +edit_missingok=Игнорировать файл журнала, если отсутствует? +edit_size=Максимальный размер до вращения +edit_always=Игнорируется +edit_minsize=Минимальный размер для поворота +edit_nominsize=Всегда +edit_ext=Расширение для повернутых имен файлов +edit_dateext=Использовать расширение даты для повернутых файлов +edit_mail=Файл журнала электронной почты перед удалением? +edit_mailto=Да, по адресу +edit_mailno=Нет не пишите +edit_mailfl=Файл журнала на электронную почту +edit_mailfirst=Новейший, который был только что повернут +edit_maillast=Самое старое, которое должно быть удалено +edit_create=Повторно создать файл журнала после поворота? +edit_createas=Да, в режиме $1 и принадлежит пользователю $2 и группе $3 +edit_createno=Нет, не воссоздай +edit_createsame=Да, со старыми разрешениями +edit_olddir=Хранить старые повернутые логи в +edit_olddirto=каталог +edit_olddirsame=Тот же каталог, что и файл журнала +edit_errors=Сообщения об ошибках по электронной почте +edit_errorsno=Никто +edit_errorsto=Адрес или пользователь +edit_post=Команды для запуска после поворота +edit_pre=Команды для запуска перед вращением +edit_default=По умолчанию ($1) +edit_sharedscripts=Запускать скрипты только один раз для всех файлов? +edit_now=Повернуть сейчас + +global_title=Глобальные параметры +global_header=Параметры по умолчанию для всех файлов журнала + +save_err=Не удалось сохранить журнал +save_efile=Отсутствует или неверное имя файла журнала +save_esize=Отсутствует или неверный максимальный размер +save_eminsize=Отсутствует или неверный минимальный размер +save_erotate=Отсутствует или недействительно максимальное количество старых журналов для хранения +save_ecreatemode=Отсутствует или недействителен восьмеричный или трехзначный режим создания +save_ecreateuser=Отсутствующий или недействительный пользователь создания +save_ecreategroup=Отсутствующая или неверная группа создания +save_emust1=Вы должны войти в режим создания при входе пользователя создания +save_emust2=Вы должны ввести пользователя создания при входе в группу создания +save_eolddirto=Отсутствует или неверный каталог для старых повернутых журналов +save_eext=Отсутствует расширение для повернутых имен файлов журнала +save_emailto=Отсутствует адрес электронной почты для повернутых логов +save_eerrors=Отсутствует адрес электронной почты для сообщений об ошибках +save_epre=Скрипт предварительного вращения не может содержать строку endcript или endrotate +save_epost=Скрипт после поворота не может содержать строку endcript или endrotate +save_enofiles=Нет файлов для поворота введен + +log_modify_sched=Изменено ротация логов Cron Job +log_create_sched=Создана ротация логов Cron Job +log_delete_sched=Удалён ротация логов Cron job +log_global=Модифицированные глобальные параметры +log_create=Добавлено вращение для файла журнала $1 +log_modify=Изменено вращение для файла журнала $1 +log_delete=Удалено вращение для файла журнала $1 +log_delete_logs=Удаленное вращение для файлов журнала $1 + +sched_title=Расписание ротации журнала +sched_desc=Для выполнения ротации журнала, настроенного с помощью этого модуля, команда Cron должна запускать команду $1 по регулярному расписанию (обычно ежедневно). +sched_runparts=В настоящее время команда ротации журнала выполняется из сценария $1 $2 и не может быть изменена. +sched_sched=Вращение журнала cron +sched_disabled=Отключено +sched_enabled=Включено, иногда ниже .. +sched_save=Обновление Cron Job +sched_err=Не удалось сохранить график ротации +sched_when=Раз бежать + +force_title=Force Log Rotation +force_doing=Принудительное немедленное вращение всех файлов журнала. +force_doingone=Принудительное немедленное вращение одного файла журнала. +force_done=.. сделано. +force_failed=.. не удалось! Смотрите вывод выше по причине. + +delete_err=Не удалось удалить логи +delete_enone=Не выбрано, ничего не выбрано diff --git a/logrotate/lang/sk.auto b/logrotate/lang/sk.auto index 432b4c234..60811a55c 100644 --- a/logrotate/lang/sk.auto +++ b/logrotate/lang/sk.auto @@ -48,7 +48,6 @@ edit_pre=Príkazy na spustenie pred rotáciou edit_default=Predvolené ($1) edit_sharedscripts=Skripty spúšťajte iba raz pre všetky súbory? edit_now=Otočiť teraz -edit_clone=Clone global_title=Globálne možnosti global_header=Predvolené možnosti pre všetky protokolové súbory diff --git a/logrotate/lang/sl.auto b/logrotate/lang/sl.auto index 13ef80928..e94d47933 100644 --- a/logrotate/lang/sl.auto +++ b/logrotate/lang/sl.auto @@ -64,7 +64,6 @@ edit_pre=Ukazi za zagon pred vrtenjem edit_default=Privzeto ($1) edit_sharedscripts=Za vse datoteke enkrat zaženite skripte? edit_now=Zavrtite zdaj -edit_clone=Clone global_title=Globalne možnosti global_header=Privzete možnosti za vse datoteke dnevnika diff --git a/logrotate/lang/sv.auto b/logrotate/lang/sv.auto index 5929633fe..db6c72507 100644 --- a/logrotate/lang/sv.auto +++ b/logrotate/lang/sv.auto @@ -64,7 +64,6 @@ edit_pre=Kommandon som ska köras före rotation edit_default=Standard ($1) edit_sharedscripts=Kör du bara skript en gång för alla filer? edit_now=Rotera nu -edit_clone=Clone global_title=Globala alternativ global_header=Standardalternativ för alla loggfiler diff --git a/logrotate/lang/th.auto b/logrotate/lang/th.auto index a9d355325..31ef7d94f 100644 --- a/logrotate/lang/th.auto +++ b/logrotate/lang/th.auto @@ -64,7 +64,6 @@ edit_pre=คำสั่งให้รันก่อนการหมุน edit_default=ค่าเริ่มต้น ($1) edit_sharedscripts=เรียกใช้สคริปต์เพียงครั้งเดียวสำหรับไฟล์ทั้งหมดหรือไม่ edit_now=หมุนทันที -edit_clone=Clone global_title=ตัวเลือกสากล global_header=ตัวเลือกเริ่มต้นสำหรับไฟล์บันทึกทั้งหมด diff --git a/logrotate/lang/tr.auto b/logrotate/lang/tr.auto index 1e5a8eae1..9ccc89167 100644 --- a/logrotate/lang/tr.auto +++ b/logrotate/lang/tr.auto @@ -64,7 +64,6 @@ edit_pre=Döndürmeden önce çalıştırılacak komutlar edit_default=Varsayılan ($1) edit_sharedscripts=Tüm dosyalar için komut dosyalarını yalnızca bir kez mi çalıştırmak istiyorsunuz? edit_now=Şimdi Döndür -edit_clone=Clone global_title=Global Seçenekler global_header=Tüm günlük dosyaları için varsayılan seçenekler diff --git a/logrotate/lang/uk.auto b/logrotate/lang/uk.auto index efc3c56ee..2b66c705f 100644 --- a/logrotate/lang/uk.auto +++ b/logrotate/lang/uk.auto @@ -64,7 +64,6 @@ edit_pre=Команди для запуску перед обертанням edit_default=За замовчуванням ($1) edit_sharedscripts=Запускати сценарії один раз для всіх файлів? edit_now=Поверніть зараз -edit_clone=Clone global_title=Глобальні параметри global_header=Параметри за замовчуванням для всіх файлів журналу diff --git a/logrotate/lang/ur.auto b/logrotate/lang/ur.auto index b57a49c01..8f46787f8 100644 --- a/logrotate/lang/ur.auto +++ b/logrotate/lang/ur.auto @@ -64,7 +64,6 @@ edit_pre=گردش سے پہلے چلانے کے احکامات edit_default=پہلے سے طے شدہ ($1) edit_sharedscripts=صرف تمام فائلوں کے لئے ایک بار اسکرپٹ چلائیں؟ edit_now=اب گھمائیں -edit_clone=Clone global_title=عالمی اختیارات global_header=تمام لاگ فائلوں کیلئے پہلے سے طے شدہ اختیارات diff --git a/logrotate/lang/vi.auto b/logrotate/lang/vi.auto index 245bb395c..8410845f5 100644 --- a/logrotate/lang/vi.auto +++ b/logrotate/lang/vi.auto @@ -64,7 +64,6 @@ edit_pre=Các lệnh để chạy trước khi xoay edit_default=Mặc định ($1) edit_sharedscripts=Chỉ chạy script một lần cho tất cả các tệp? edit_now=Xoay ngay bây giờ -edit_clone=Clone global_title=Tùy chọn toàn cầu global_header=Tùy chọn mặc định cho tất cả các tệp nhật ký diff --git a/logrotate/lang/zh.auto b/logrotate/lang/zh.auto index 9e820c771..441bd51c5 100644 --- a/logrotate/lang/zh.auto +++ b/logrotate/lang/zh.auto @@ -64,7 +64,6 @@ edit_pre=旋转前要运行的命令 edit_default=默认值（$1） edit_sharedscripts=所有文件只运行一次脚本？ edit_now=现在旋转 -edit_clone=Clone global_title=全局选项 global_header=所有日志文件的默认选项 diff --git a/logrotate/lang/zh_TW.auto b/logrotate/lang/zh_TW.auto index 81893d186..f882cedb3 100644 --- a/logrotate/lang/zh_TW.auto +++ b/logrotate/lang/zh_TW.auto @@ -64,7 +64,6 @@ edit_pre=旋轉前要運行的命令 edit_default=默認值（$1） edit_sharedscripts=所有文件只運行一次腳本？ edit_now=現在旋轉 -edit_clone=Clone global_title=全局選項 global_header=所有日誌文件的默認選項 diff --git a/lpadmin/lang/de b/lpadmin/lang/de index 52c26b9bd..ab79be388 100644 --- a/lpadmin/lang/de +++ b/lpadmin/lang/de @@ -313,4 +313,4 @@ add_gerr=Fehler beim Hinzufügen der Gruppe add_echeck=Server $1 hat nicht das Modul Druckerverwaltung add_ediff=Server $1 verwendet ein anderes Drucksystem ($2) als dieses System add_ediff2=Server $1 verwendet einen anderen Druckertreiber ($2) als dieses System -add_ok=$1 mit $2 Druckern hinzugefügt. +add_ok=$1 mit $2 Druckern hinzugefügt. \ No newline at end of file diff --git a/lvm/lang/de b/lvm/lang/de index e2cf36828..a55fd942e 100644 --- a/lvm/lang/de +++ b/lvm/lang/de @@ -8,6 +8,7 @@ index_none=Keine Volume-Gruppen auf Ihrem System gefunden. index_add=Eine neue Volume-Gruppe hinzufügen. index_nolvs=Diese Volume-Gruppe hat
noch keine logischen Volumes. index_nopvs=Diese Volume-Gruppe hat
noch keine physischen Volumes. +index_addpv=Ein physisches Volume zur Gruppe hinzufügen. index_addpv2=Ein physisches Volume zu $1 hinzufügen. index_addlv2=Ein logisches Volume in $1 erstellen. index_addlv2s=Ein Snapshot in $1 erstellen. @@ -247,4 +248,4 @@ log_modify_pv=Physisches Volume $1 in VG $2 geändert log_delete_pv=Physisches Volume $1 aus VG $2 entfernt log_resize_pv=Physisches Volume $1 in VG $2 vergrößert -blocks=Blöcke +blocks=Blöcke \ No newline at end of file diff --git a/lvm/lang/de.auto b/lvm/lang/de.auto deleted file mode 100644 index aff6b2623..000000000 --- a/lvm/lang/de.auto +++ /dev/null @@ -1 +0,0 @@ -i2ndex_addpv=Add a physical volume to the group. diff --git a/majordomo/lang/af.auto b/majordomo/lang/af.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/af.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/ar.auto b/majordomo/lang/ar.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/ar.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/be.auto b/majordomo/lang/be.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/be.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/bg.auto b/majordomo/lang/bg.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/bg.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/ca b/majordomo/lang/ca index 9b401acce..d448fa2db 100644 --- a/majordomo/lang/ca +++ b/majordomo/lang/ca @@ -17,7 +17,6 @@ index_global=Edita les Opcions del Majordomo index_globaldesc=Edita les opcions globals del majordomo que s'apliquen a totes les llistes de correu index_return=a les llistes de correu index_version=Versió majordomo $1 - global_title=Opcions Globals global_ecannot=No tens permís per editar les opcions globals global_header=Opcions Globals del Majordomo @@ -30,7 +29,6 @@ global_ewhereami=Hi falta el nom de host del servidor o bé no és vàlid global_ewhoami=Hi falta l'adreça del majordomo o bé no és vàlida global_eowner=Hi falta l'adreça del propietari o bé no és vàlida global_esendmail=No existeix l'ordre '$1' del sendmail - create_ecannot=No tens permís per crear noves llistes de correu create_title=Creació de Llista de Correu create_header=Detalls de la nova llista @@ -54,7 +52,6 @@ create_archive=Arxiva la llista de correu create_archiveyear=En un fitxer anual create_archivemonth=En un fitxer mensual create_archiveday=En un fitxer diari - cdigest_ecannot=No tens permís per crear noves llistes de resums cdigest_title=Creació de Llista de Resums cdigest_header=Detalls de la nova llista de resums @@ -71,20 +68,17 @@ cdigest_lines=El total de missatges faci $1 línies cdigest_err=No s'ha pogut crear la llista de resums cdigest_edays=Hi falta el nombre de dies o bé no és vàlid cdigest_elines=Hi falta el nombre de línies o bé no és vàlid - edit_title=Edició de Llista de Correu edit_ecannot=No tens permís per editar aquesta llista de correu edit_delete=Suprimeix la Llista edit_deletemsg=Suprimeix aquesta llista, incloent-hi tots els fitxers associats i àlies de correu edit_for=$1 - delete_ecannot=No tens permís per suprimir aquesta llista de correu delete_edigest=Aquesta llista no es pot suprimir, ja que sembla que té una llista de resums associada delete_title=Supressió de Llista delete_rusure=Segur que vols suprimir la llista de correu $1? S'esborraran els següents fitxers: delete_aliases=S'esborraran també els següents àlies: delete_ok=Suprimeix la Llista - members_title=Membres de la Llista members_desc=Utilitza la caixa de text de sota per editar la llista de les adreces de correu que rebran el correu enviat a aquesta llista. members_rodesc=La caixa de text de sota llista totes les adreces de correu que rebran el correu enviat a aquesta llista. @@ -99,7 +93,6 @@ members_esub=Has de triar una contrasenya de manteniment abans de subscriure adr members_esubaddr=L'adreça subscrita ha de tenir un nom de domini complet, com ara foo@bar.com members_eunsub=Has de triar una contrasenya de manteniment abans de treure adreces d'aquesta llista members_eunsubaddr=L'adreça donada de baixa ha de tenir un nom de domini complet, com ara foo@bar.com - info_title=Missatges i Descripció info_header=Missatges i descripció info_desc=Descripció de la llista per incloure en la resposta a l'ordre lists @@ -107,7 +100,6 @@ info_info=Missatge informatiu per retornar en resposta a l'ordre info $1/, com ara /foobar.com/ o /obscene/. - head_title=Capçaleres i Peus head_header=Capçaleres i peus reenviats head_fronter=Reenvia les capçaleres de correu head_footer=Reenvia els peus de correu head_headers=Capçaleres SMTP extres del correu reenviat - misc_title=Opcions Miscel.lànies misc_header=Opcions miscel·lànies de la llista misc_munge=Utilitza el domini només quan comparis adreces misc_debug=Mode depuració misc_info=Inclou la data de darrera modificació al missatge informatiu misc_intro=Inclou la data de darrera modificació al missatge introductori - digest_title=Opcions de Resum digest_header=Opcions de generació del resum digest_name=Títol del resum @@ -205,7 +192,6 @@ digest_edays=Hi falta el nombre de dies o bé no és vàlid digest_elines=Hi falta el nombre de línies o bé no és vàlid digest_evolume=Hi falta el número de volum o bé no és vàlid digest_eissue=Hi falta el número de publicació o bé no és vàlid - log_global=S'han canviat les opcions globals log_create_list=S'ha creat la llista de correu $1 log_create_digest=S'ha creat la llista de resums $1 @@ -222,13 +208,11 @@ log_access=S'ha actualitzat el control d'accés de la llista $1 log_head=S'han actualitzat les capçaleres i els peus de la llista $1 log_misc=S'han actualitzat les opcions miscel·lànies de la llista $1 log_digest=S'han actualitzat les opcions de resum de la llista $1 - acl_lists=Llistes de correu que aquest usuari pot gestionar acl_lall=Totes les llistes acl_lsel=Seleccionades... acl_global=Pot editar les opcions globals acl_create=Pot crear noves llistes de correu acl_edit=Pot editar els membres de les llistes - alias_err=No s'han pogut configurar els àlies alias_eowner=Hi falta l'adreça de correu del propietari diff --git a/majordomo/lang/ca.auto b/majordomo/lang/ca.auto index 1cd07c8b1..a5356731e 100644 --- a/majordomo/lang/ca.auto +++ b/majordomo/lang/ca.auto @@ -4,13 +4,9 @@ index_info=Informació de llista index_mail=Direcció de correu index_moderated=Moderada index_count=# d’usuaris - global_saved=(desat) - create_minimum=Informació mínima requerida - edit_return=llista d'enviament - check_title=Consulteu Majordomo Config check_test=Prova de. .. check_result=Resultat / revisió addicional diff --git a/majordomo/lang/cs b/majordomo/lang/cs index f0a10e632..86aacd602 100644 --- a/majordomo/lang/cs +++ b/majordomo/lang/cs @@ -14,7 +14,6 @@ index_global=Editovat nastavení Majordomu index_globaldesc=Ediovat globální nastavení Majordom, které budou využity pro všechny mail seznamy index_return=mailové seznamy index_version=Majordomo verze $1 - global_title=Globální nastavení global_ecannot=Nemáte oprávnění editovat globální nastavení global_header=Globální nastavení Majordoma @@ -27,7 +26,6 @@ global_ewhereami=Chybějící nebo neplatné jméno hosta mail serveru global_ewhoami=Chybějící nebo neplatná adresa Majordoma global_eowner=Chybějící nebo neplatná adresa vlastníka global_esendmail=Sendmail příkaz '$1' neexistuje - create_ecannot=Nemáte oprávnění vytvářet nové seznamy create_title=Vytvoření mailového seznamu create_header=Detaily nového seznamu @@ -51,7 +49,6 @@ create_archive=Archivovat mailový seznam? create_archiveyear=Do ročního souboru create_archivemonth=Do měsíčního souboru create_archiveday=Do denního souboru - cdigest_ecannot=Nemáte oprávnění vytvořit nové zhuštěné seznamy cdigest_title=Vytvořit zhuštěný seznam cdigest_header=Detaily nového zhuštěného seznamu @@ -68,21 +65,18 @@ cdigest_lines=Zprávy mají celkem $1 řádků cdigest_err=Chyba při vytváření zhuštěného seznamu cdigest_edays=Chybějící nebo neplatný počet dnů cdigest_elines=Chybějící nebo neplatný počet řádků - edit_title=Editace mailového seznamu edit_ecannot=Nemáte oprávnění editovat tento mailový seznam edit_delete=Smazat seznam edit_deletemsg=Smazat seznam, včetně všech asociovaných souborů a mail aaliasů edit_return=mailový seznam edit_for=Pro seznam $1 - delete_ecannot=Nemáte oprávnění smazat tenot mailový seznam delete_edigest=Tento seznam nemůže být smazán, protože to vypadá, že má asociovaný zhuštěný seznam delete_title=Smazání seznamu delete_rusure=Skutečně chcete smazat mailový seznam $1? Následující soubory budou smazány : delete_aliases=Následující mailové aliasy budou taktéž smazány : delete_ok=Smazat seznam - members_title=Členové seznamu members_desc=Použitím níže uvedeného boxu editujete seznam mailových adres, které budou přijímat maily, poslané do tohoto seznamu. members_rodesc=Níže uvedený text box vypisuje seznam všech mailových adres, které budou přijímat maily, poslané do tohoto seznamu. @@ -97,7 +91,6 @@ members_esub=Musíte si zvolit heslo údržbáře dříve, než přidáte adresy members_esubaddr=Přidávaná adresa musí obsahovat plné jméno domény, např.foo@bar.com members_eunsub=Musíte si zvolit heslo údržbáře dříve, než odeberete adresy z tohoto seznamu members_eunsubaddr=Odebíraná adresa musí obsahovat plné jméno domény, např.foo@bar.com - info_title=Zprávy a popisy info_header=Zprávy a popisy info_desc=Popis seznamu, jež bude uveden v obsahu odezvy na příkaz lists @@ -105,7 +98,6 @@ info_info=Informativní zpráva, jež se vrátí jako odezva na příkaz inf info_intro=Úvodní zpráva, jež bude odeslána, jakmile bude někdo přidán do seznamu info_same=Shodná s informativní zprávou info_below=Jako níže vložené.. - subs_title=Příspívání a moderování subs_header=Nastavení příspívání a moderování subs_sub=Ochrana zahájení přispívání @@ -131,7 +123,6 @@ subs_eowner=Chybějící emailová adresa vlastníka subs_eapproval=Chybějící emailová adresa schvalovatele subs_emoderator=Chybějící nebo neplatná adresa moderátora subs_epasswd=Chybějící nebo neplatné heslo - mesg_title=Nastavení emailu mesg_header=Nastavení odcházejícího emailu mesg_reply=Reply-To: adresa v přeposílaném mailu @@ -152,7 +143,6 @@ mesg_esender=Chybějící nebo neplatná Sender: adresa mesg_esender2=Sender: adresa musí obsahovat jméno hosta mesg_ehost=Chybějící nebo neplatné jméno hosta mesg_emaxlength=Chybějící nebo neplatná maximální velikost zprávy - access_title=Kontrola přístupu access_header=Kontrola přístupu pro příkazy Majordoma access_open=Kdokoliv @@ -175,20 +165,17 @@ access_res2=Adresy v souboru access_tbody=Tabu v tělu regexps access_theader=Tabu v hlavičce regexps access_taboo=Poznámka: všechna tabu a edresy regexps musí začínat a končit znakem / , například /foobar.com/ nebo /obscene/. - head_title=Hlavičky a patičky head_header=Hlavičky a patičky přeposílaného emailu head_fronter=Hlavička přeposílaného emailu head_footer=Patička přeposílaného emailu head_headers=Extra SMTP hlavičky pro přeposíláný mail - misc_title=Ostatní nastavení misc_header=Ostatní nastavení seznamu misc_munge=Použít pouze doménu, pokud porovnanými adresami? misc_debug=Debug mód? misc_info=Zahrnout do informační zprávy datum poslední dofifikace? misc_intro=Zahrnout do úvodní zprávy datum poslední dofifikace? - digest_title=Nastavení zhuštění digest_header=Nastavení generování zhuštění digest_name=Titulek zhuštění @@ -203,7 +190,6 @@ digest_edays=Chybějící nebo neplatné počet dnů digest_elines=Chybějící nebo neplatný počet řádků digest_evolume=Chybějící nebo neplatné číslo svazku digest_eissue=Chybějící nebo neplatný číslo vydání - log_global=Změněna globální nastavení log_create_list=Vytvořen mailový seznam $1 log_create_digest=Vytvořen zhuštěný seznam $1 @@ -220,13 +206,11 @@ log_access=Aktualizována kontrola přístupu pro seznam $1 log_head=Aktualizovány hlavičky a patičky pro seznam $1 log_misc=Aktualizována ostatní nastavení pro seznam $1 log_digest=Aktualizována nastavení zhuštění pro seznam $1 - acl_lists=Mailové seznamy, které může tento uživatel udržovat acl_lall=Všechny seznamy acl_lsel=Vybrané.. acl_global=Může editovat globální nastavení? acl_create=Může vytvářet nové mailové seznamy? acl_edit=Může editovat členství v seznamech? - alias_err=Chyba při nastavení aliasů alias_eowner=Chybějící email adresa vlastníka diff --git a/majordomo/lang/cs.auto b/majordomo/lang/cs.auto index e058e43a8..898dd8a8c 100644 --- a/majordomo/lang/cs.auto +++ b/majordomo/lang/cs.auto @@ -7,11 +7,8 @@ index_info=Seznam informací index_mail=Poštovní adresa index_moderated=Moderuje index_count=Počet uživatelů - global_saved=(uložené) - create_minimum=Minimální požadované informace - check_title=Zkontrolujte Majordomo Config check_test=Vyzkoušejte. .. check_result=Výsledek / dodatečná kontrola diff --git a/majordomo/lang/da.auto b/majordomo/lang/da.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/da.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/de b/majordomo/lang/de index a10f9693e..802c232d5 100644 --- a/majordomo/lang/de +++ b/majordomo/lang/de @@ -23,7 +23,6 @@ index_info=Kurzbescheibung index_mail=Mail Adresse index_moderated=Modieriert index_count=# Teilnehmer - global_title=Globale Einstellungen global_ecannot=Sie haben nicht die Berechtigung die globalen Einstellungen zu bearbeiten global_header=Globale Majordomo-Einstellungen @@ -37,7 +36,6 @@ global_ewhoami=Die Majordomo Mail-Adresse fehlt oder ist ungültig global_eowner=Die Eigentümer Mail-Adresse fehlt oder ist ungültig global_esendmail=Das Sendmail-Kommando '$1' gibt es nicht global_saved=(gespeichert) - create_ecannot=Sie haben nicht die Berechtigung neue Listen zu erstellen create_title=Mailingliste erstellen create_header=Details der neue Liste @@ -62,7 +60,6 @@ create_archiveyear=In jährlicher Datei create_archivemonth=In monatlicher Datei create_archiveday=In täglicher Datei create_minimum=Mindestens erforderlich Angaben - cdigest_ecannot=Sie haben keine Berechtigung eine neue Übersichtsliste zu erstellen cdigest_title=Neue Übersichtsliste cdigest_header=Details der neuen Übersichtsliste @@ -79,21 +76,18 @@ cdigest_lines=Die Nachrichten haben insgesamt $1 Zeilen cdigest_err=Erstellender Übersichtsliste ist gescheitert cdigest_edays=Die Anzahl der Tage fehlt oder ist ungültig cdigest_elines=Die Anzahl der Zeilen fehlt oder ist ungültig - edit_title=Mailingliste bearbeiten edit_ecannot=Sie haben nicht die Berechtigung die Mailingliste zu bearbeiten edit_delete=Lösche die Liste edit_deletemsg=Lösche diese Liste zusammen mit allen verbundenen Dateien und Mail-Aliasen edit_return=Mailingliste edit_for=Für die Liste $1 - delete_ecannot=Sie haben nicht die Berechtigung diese Mailingliste zu löschen delete_edigest=Diese Liste kann nicht gelöscht werden, da sie mit einer Übersichtsliste verbunden zu sein scheint delete_title=Lösche die Liste delete_rusure=Sind Sie sich sicher, dass Sie die Mailingliste $1 löschen möchten? Damit werden die folgenden Dateien entfernt: delete_aliases=Diese Mail-Aliase werden ebenfalls entfernt : delete_ok=Lösche die Liste - members_title=Mitglieder der Liste members_desc=Verwenden Sie das untere Textfeld um die Liste der Mail-Adressen zu bearbeiten, die die Mails erhalten sollen, die an diese Liste gesendet werden. members_rodesc=Das untere Textfeld enthält alle Mail-Adressen, die die Mails erhalten sollen, die an diese Liste gesendet werden. @@ -108,7 +102,6 @@ members_esub=Sie müssen ein Verwalterpasswort auswählen, bevor Sie eine Adress members_esubaddr=Die Adresse die hinzugefügt werden soll, muß einen kompletten Domainnamen besitzen, z.B. foo@bar.de members_eunsub=Sie müssen ein Verwalterpasswort auswählen, bevor Sie Adressen aus der Liste entfernen können members_eunsubaddr=Die Adresse, die entfernt werden soll muss einen kompletten Domainnamen besitzen, z.B. foo@bar.com - info_title=Mitteilungen und Beschreibung info_header=Mitteilungen und Beschreibung info_desc=Beschreibung der Liste. Sie wird in die Anwort auf ein lists Kommando eingefügt @@ -116,7 +109,6 @@ info_info=Informative Mitteilung. Sie wird als Antwort auf das info $1 info_intro=Einleitende Mitteilung. Sie wird versandt, sobald sich jemand in die Liste einschreibt info_same=Das Gleiche wie die informative Mitteilung info_below=So wie unten eingetragen... - subs_title=Einschreiben und Moderation subs_header=Einschreibens- und Moderations Einstellungen subs_sub=Einschreibensregeln @@ -142,7 +134,6 @@ subs_eowner=Die Mail-Adresse des Eigentümers fehlt subs_eapproval=Die Mail-Adresse der Genehmigung fehlt subs_emoderator=Die Mail-Adresse des Moderators fehlt oder ist ungültig subs_epasswd=Das Passwort fehlt oder ist falsch - mesg_title=Mail-Einstellungen mesg_header=Einstellungen zum Senden von Mail mesg_reply="Reply-To:" Adresse der Liste @@ -163,7 +154,6 @@ mesg_esender=Fehlende oder ungültige "Absender:" Mail-Adresse mesg_esender2="Absender:" Mail-Adresse darf keinen Hostnamen enthalten mesg_ehost=Fehlender oder ungültiger Hostname mesg_emaxlength=Fehlende oder ungültige Einstellung der maximalen Nachrichtengröße - access_title=Zugriffskontrolle access_header=Zugriffskontrolle für Majordomo-Kommandos access_open=Jedermann @@ -186,20 +176,17 @@ access_res2=Adressen aus der Datei access_tbody=Ausdrücke (regexps), die im Nachrichtentext nicht erscheinen dürfen access_theader=Ausdrücke (regexps), die in der Kopfzeile nicht erscheinen dürfen access_taboo=Alle Ausdrücke (regexps) der Taboo-/ und der Adressen-Liste müssen mit einem / beginnen und enden. Z.B. /foobar.de/ oder /obscene/
Zum zurückweisen von SPAM tragen sie z.B. /^X-Spam-Flag: YES/i oder /^X-Spam-Level: \*\*\*\*\*/i als nicht erlaubte Kopfzeile ein. - head_title=Kopf- und Fußzeilen head_header=Kopf- und Fußzeile einer zurückgesandten Mail head_fronter=Kopfzeile einer zurückgesandten Mail head_footer=Fußzeile einer zurückgesandten Mail head_headers=Zusätzliche SMTP-Kopfzeilen für zurückgesandte Mail - misc_title=Weitere Einstellungen misc_header=Diverse Listen Einstellungen misc_munge=Die Domain nur beim Vergleichen von Adressen verwenden? misc_debug=Debugmodus? misc_info=Einfügen des Datums der letzten Änderung in die informative Nachricht? misc_intro=Einfügen des Datums der letzten Änderung in die einleitende Mitteilung? - digest_title=Einstellungen der weiteren Verarbeitung digest_header=Allgemeine Verarbeitungs Einstellungen digest_name=Verarbeitungstitel @@ -214,7 +201,6 @@ digest_edays=Die Anzahl der Tage fehlt oder ist ungültig digest_elines=Die Anzahl der Linien fehlt oder ist ungültig digest_evolume=Die Verarbeitungsgröße fehlt oder ist ungültig digest_eissue=Fehlende oder ungültige Ausgabenummer - log_global=Veränderte allgemeine Einstellungen log_create_list=Mailingliste wurde erstellt: $1 log_create_digest=Erstellte Verarbeitungs Einstellungen: $1 @@ -231,17 +217,14 @@ log_access=Aktualisierte Zugriffskontrolle der Liste $1 log_head=Aktualisierte Kopf- und Fußzeile der Liste $1 log_misc=Aktualisierte allgemeine Einstellungen der Liste $1 log_digest=Aktualisierte Verarbeitungs Einstellungen der Liste $1 - acl_lists=Mailinglisten, die dieser Benutzer verwalten darf acl_lall=Alle Listen acl_lsel=Ausgewählte .. acl_global=Kann allgemeine Einstellungen verändern? acl_create=Darf neue Mailingliste erstellen? acl_edit=Kann Liste der Mitglieder verändern? - alias_err=Aliase konnten nicht eingerichtet werden alias_eowner=Mail-Adresse des Eigentümers fehlt - check_title=Testen der Majordomo Konfiguration check_test=Test für ... check_result=Ergebnis / weitere Tests diff --git a/majordomo/lang/el.auto b/majordomo/lang/el.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/el.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/es b/majordomo/lang/es index d79cf4564..a108d32c4 100644 --- a/majordomo/lang/es +++ b/majordomo/lang/es @@ -15,7 +15,6 @@ index_global=Editar Opciones de Majordomo index_globaldesc=Editar opciones globales de Majordomo que se aplican a todas las listas de correo index_return=listas de correo index_version=Majordomo versión $1 - global_title=Opciones Globales global_ecannot=No estás autorizado a editar opciones globales global_header=Opciones Globales de Majordomo @@ -28,7 +27,6 @@ global_ewhereami=Nombre de máquina de servidor de correo sin poner o inválido global_ewhoami=Dirección de Majordomo sin poner o inválida global_eowner=Dirección del propietario sin poner o inválida global_esendmail=El comando de Sendmail '$1' no existe - create_ecannot=No estás autorizado a crear nuevas listas create_title=Crear Lista de Correo create_header=Detalles de la nueva lista @@ -52,7 +50,6 @@ create_archive=¿Archivar lista de correo? create_archiveyear=En archivo anual create_archivemonth=En archivo mensual create_archiveday=En archivo diario - cdigest_ecannot=No tiene permiso para crear nuevas listas de resumen cdigest_title=Crear Lista de Resumen cdigest_header=Detalles de la nueva lista de resumen @@ -69,21 +66,18 @@ cdigest_lines=Los mensajes totalizan $1 líneas cdigest_err=No se pudo crear la lista de resumen cdigest_edays=Número de días no válido o inexistente cdigest_elines=Número de líneas no válido o inexistente - edit_title=Editar Lista de Correo edit_ecannot=No estás autorizado a editar esta lista de correo edit_delete=Borrar Lista edit_deletemsg=Borrar esta lista, incluyendo todos sus archivos asociados y aliases de correo edit_return=lista de correo edit_for=Para la lista $1 - delete_ecannot=No estás autorizado a borrar esta lista de correo delete_edigest=Esta lista no puede ser borrada debido a que parece tener una lista resumen asociada delete_title=Borrar Lista delete_rusure=¿Estás seguro de querer borrar la lista de correo $1?. Los siguientes archivos serán borrados: delete_aliases=Los siguientes aliases de correo serán también borrados: delete_ok=Borrar Lista - members_title=Miembros de Lista members_desc=Utiliza la caja de texto inferior para editar la lista de direcciones de correo que recibirán el correo enviado a esta lista. members_rodesc=La caja de texto inferior lista todas las direcciones de correo que recibirán el correo enviado a esta lista. @@ -98,7 +92,6 @@ members_esub=Debes de seleccionar una clave de acceso de mantenimiento antes de members_esubaddr=La dirección a suscribir debe de tener nombre completo de dominio, como foo@bar.com members_eunsub=Debes de seleccionar una clave de acceso de mantenimiento antes de quitar suscripciones de direcciones de esta lista members_eunsubaddr=La dirección a dar de baja debe de tener un nombre completo de dominio, como foo@bar.com - info_title=Mensajes y Descripción info_header=Mensajes y descripción info_desc=Descripción de lista, a ser incluída en el comando de respuesta a las listas @@ -106,7 +99,6 @@ info_info=Mensaje informativo, a devolver en respuesta al comando info $1/, como /foobar.com/ o /obsceno/. - head_title=Cabeceras y Pies head_header=Cabeceras y pies de correo reenviado head_fronter=Cabecera de correo reenviado head_footer=Pie de correo reenviado head_headers=Cabeceras extra de SMTP para correo reenviado - misc_title=Opciones Varias misc_header=Lista de opciones varias misc_munge=¿Uso sólo el dominio cuando comparo las direcciones? misc_debug=¿Modo depuración? misc_info=¿Incluyo la fecha de última modificación en mensaje informativo? misc_intro=¿Incluyo la fecha de última modificación en mensaje introductorio? - digest_title=Opciones de Resumen digest_header=Opciones de generación de resumen digest_name=Título de resumen @@ -204,7 +191,6 @@ digest_edays=Número de días inválido o sin poner digest_elines=Número de líneas inválido o sin poner digest_evolume=Número de volumen inválido o sin poner digest_eissue=Número de asunto inválido o sin poner - log_global=Cambiadas opciones globales log_create_list=Creada lista de correo $1 log_create_digest=Creada lista resumen $1 @@ -221,13 +207,11 @@ log_access=Actualizado control de acceso para lista $1 log_head=Actualizadas cabeceras y pies para lista $1 log_misc=Actualizadas opciones varias para lista $1 log_digest=Actualizadas opciones de resumen para lista $1 - acl_lists=Listas de correo que este usuario puede manejar acl_lall=Todas las listas acl_lsel=Las seleccionadas... acl_global=¿Puede editar opciones globales? acl_create=¿Puede crear nuevas listas de correo? acl_edit=¿Puede editar pertenecia a listas? - alias_err=No pude configurar aliases alias_eowner=Falta dirección de correo de propietario diff --git a/majordomo/lang/es.auto b/majordomo/lang/es.auto index 62b4aa5db..f5824415e 100644 --- a/majordomo/lang/es.auto +++ b/majordomo/lang/es.auto @@ -6,11 +6,8 @@ index_info=Información de la lista index_mail=Dirección de correo index_moderated=Moderado index_count=# de usuarios - global_saved=(salvado) - create_minimum=Información mínima requerida - check_title=Verifique la configuración de Majordomo check_test=Hacer una prueba por. .. check_result=Resultado / verificación adicional diff --git a/majordomo/lang/eu.auto b/majordomo/lang/eu.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/eu.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/fa.auto b/majordomo/lang/fa.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/fa.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/fi.auto b/majordomo/lang/fi.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/fi.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/fr.auto b/majordomo/lang/fr.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/fr.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/he.auto b/majordomo/lang/he.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/he.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/hr.auto b/majordomo/lang/hr.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/hr.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/hu.auto b/majordomo/lang/hu.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/hu.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/it.auto b/majordomo/lang/it.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/it.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/ja b/majordomo/lang/ja index a564265b1..4ec303481 100644 --- a/majordomo/lang/ja +++ b/majordomo/lang/ja @@ -13,7 +13,6 @@ index_digest=新規のダイジェスト リストを追加 index_global=Majordomo オプションを編集 index_globaldesc=すべてのメーリング リストに適用するグローバルMajordomo オプションを編集 index_return=メーリング リスト - global_title=グローバル オプション global_ecannot=グローバル オプションを編集できません。 global_header=グローバル Majordomo オプション @@ -26,7 +25,6 @@ global_ewhereami=メール サーバ ホスト名がないか無効です global_ewhoami=Majordomo アドレスがないか無効です global_eowner=所有者のアドレスがないか無効です global_esendmail=sendmail コマンド '$1' は存在しません - create_ecannot=新規のリストを作成できません create_title=メーリング リストの作成 create_header=新規のリストの詳細 @@ -46,7 +44,6 @@ create_ealias='$1' というメール エイリアスはすでに存在してい create_eowner=所有者の Eメール アドレスがないか無効です create_epassword=管理パスワードがないか無効です create_emoderator=モデレータの Eメール アドレスがないか無効です - cdigest_ecannot=新規のダイジェスト リストを作成できません cdigest_title=ダイジェスト リストを作成 cdigest_header=新規のダイジェスト リストの詳細 @@ -63,21 +60,18 @@ cdigest_lines=メッセージ合計 $1 行 cdigest_err=ダイジェスト リストを作成できませんでした cdigest_edays=日数がないか無効です cdigest_elines=行数がないか無効です - edit_title=メーリング リストの編集 edit_ecannot=このメーリング リストは編集できません edit_delete=リストを削除 edit_deletemsg=すべての関連ファイルとメール エイリアスを含め、このリストを削除 edit_return=メーリング リスト edit_for=リスト $1 用 - delete_ecannot=このメーリング リストは削除できません delete_edigest=このリストは関連したダイジェスト リストがあるので削除できません delete_title=リストの削除 delete_rusure=メーリング リスト $1を削除してもよろしいですか？次のファイルが削除されます: delete_aliases=次のメール エイリアスも削除されます delete_ok=リストの削除 - members_title=リスト メンバー members_desc=このリストに送信されたメールを受信する Eメール アドレスのリストを編集するには、下のテキスト ボックスを使用してください。 members_rodesc=下のテキスト ボックスは、このリストに送信されたメールを受信するすべての E メール アドレスを表示します。 @@ -92,7 +86,6 @@ members_esub=アドレスをこのリストに購読する前に保守パスワ members_esubaddr=購読するアドレスは、完全なドメインを持つ必要があります。例:foo@bar.com members_eunsub=このリストからアドレスを購読中止する前に、保守パスワードを選ぶ必要があります members_eunsubaddr=購読を中止するアドレスは、完全なドメインを持つ必要があります。例:foo@bar.com - info_title=メッセージと説明 info_header=メッセージと説明 info_desc=リスト コマンドへの応答に含めるリストの説明 @@ -100,7 +93,6 @@ info_info=コマンドinfo $1 への応答に返す情報メッセー info_intro=リストの新規購読者に送信する紹介メッセージ info_same=情報メッセージと同じ info_below=下に入力されたものを使用.. - subs_title=購読とモデレーション subs_header=購読とモデレーション オプション subs_sub=購読ポリシー @@ -126,7 +118,6 @@ subs_eowner=所有者の E メール アドレスがありません subs_eapproval=承認E メール アドレスがありません subs_emoderator=モデレータのアドレスがないか無効です subs_epasswd=パスワードがないか無効です - mesg_title=E メール オプション mesg_header=E メールの送信オプション mesg_reply=再送信された E メールのReply-To: (返信先)アドレス @@ -147,7 +138,6 @@ mesg_esender=Sender: (送信者)アドレスがないか無効です mesg_esender2=Sender: (送信者)アドレスにホスト名を含めることはできません mesg_ehost=ホスト名がないか無効です mesg_emaxlength=メッセージの最大サイズがないか無効です - access_title=アクセス制御 access_header=majordomo コマンドのアクセス制御 access_open=任意のユーザ @@ -170,20 +160,17 @@ access_res2=ファイル内のアドレス access_tbody=禁止する本文の正規表現 access_theader=禁止するヘッダの正規表現 access_taboo=注意:すべての禁止とアドレスの正規表現は/で開始され終了しなくてはなりません。例:/foobar.com/ または/obscene/。 - head_title=ヘッダとフッタ head_header=再送信された E メールのヘッダとフッタ head_fronter=再送信された E メールのヘッダ head_footer=再送信された E メールのフッタ head_headers=再送信された E メールの特別の SMTP ヘッダ - misc_title=その他のオプション misc_header=その他のリスト オプション misc_munge=アドレスの比較にドメインのみを使用しますか？ misc_debug=デバック モードにしますか？ misc_info=情報メッセージに最後に更新された日時を含めますか？ misc_intro=紹介メッセージに最後に更新された日時を含めますか？ - digest_title=ダイジェスト オプション digest_header=ダイジェストの作成オプション digest_name=ダイジェストのタイトル @@ -198,7 +185,6 @@ digest_edays=日数がないか無効です digest_elines=行数がないか無効です digest_evolume=巻数がないか無効です digest_eissue=号数がないか無効です - log_global=グローバル オプションを変更しました log_create_list=メーリング リスト $1 を作成しました log_create_digest=ダイジェスト リスト $1 を作成しました @@ -215,7 +201,6 @@ log_access=リスト $1 のアクセス制御を更新しました log_head=リスト $1 のヘッダとフッタを更新しました log_misc=リスト $1 のその他のオプションを更新しました log_digest=リスト $1 のダイジェスト オプションを更新しました - acl_lists=このユーザが管理できるメーリング リスト acl_lall=すべてのリスト acl_lsel=選択.. diff --git a/majordomo/lang/ja.auto b/majordomo/lang/ja.auto index ffa059f21..3c9b12c20 100644 --- a/majordomo/lang/ja.auto +++ b/majordomo/lang/ja.auto @@ -8,18 +8,14 @@ index_info=リスト情報 index_mail=メールアドレス index_moderated=モデレート index_count=ユーザー数 - global_saved=（保存済み） - create_archive=メーリングリストをアーカイブしますか？ create_archiveyear=年次ファイルで create_archivemonth=月次ファイルで create_archiveday=毎日のファイルで create_minimum=最低限必要な情報 - alias_err=エイリアスのセットアップに失敗しました alias_eowner=所有者のメールアドレスがありません - check_title=Majordomo構成を確認する check_test=のテスト. .. check_result=結果/追加チェック diff --git a/majordomo/lang/ko b/majordomo/lang/ko index 56db10735..25bef87be 100644 --- a/majordomo/lang/ko +++ b/majordomo/lang/ko @@ -13,7 +13,6 @@ index_digest=새 다이제스트 목록 추가 index_global=majordomo 옵션 편집 index_globaldesc=모든 메일 목록에 적용되는 글로벌 majordomo 옵션 편집 index_return=메일 목록 - global_title=글로벌 옵션 global_ecannot=글로벌 옵션을 편집할 수 없습니다 global_header=글로벌 majordomo 옵션 @@ -26,7 +25,6 @@ global_ewhereami=없거나 잘못된 메일 서버 호스트 이름 global_ewhoami=없거나 잘못된 majordomo 주소 global_eowner=없거나 잘못된 소유자 주소 global_esendmail=sendmail 명령 '$1'이(가) 존재하지 않습니다 - create_ecannot=새 메일을 작성할 수 없습니다 create_title=메일 목록 작성 create_header=새 목록 정보 @@ -46,7 +44,6 @@ create_ealias='$1'의 메일 별칭이 이미 있습니다 create_eowner=없거나 잘못된 소유자 전자 메일 주소 create_epassword=없거나 잘못된 관리 패스워드 create_emoderator=없거나 잘못된 조정자 전자 메일 주소 - cdigest_ecannot=새 다이제스트 목록을 작성할 수 없습니다 cdigest_title=다이제스트 목록 작성 cdigest_header=새 다이제스트 목록 정보 @@ -63,21 +60,18 @@ cdigest_lines=총 메시지 행 수가 $1에 도달할 때 cdigest_err=다이제스트 목록을 작성하지 못했습니다 cdigest_edays=없거나 잘못된 일 수 cdigest_elines=없거나 잘못된 행 수 - edit_title=메일 목록 편집 edit_ecannot=이 메일 목록을 편집할 수 없습니다 edit_delete=목록 삭제 edit_deletemsg=모든 관련 파일 및 메일 별칭과 함께 이 목록 삭제 edit_return=메일 목록 edit_for=목록 $1 - delete_ecannot=이 메일 목록을 삭제할 수 없습니다 delete_edigest=이 목록에는 관련 다이제스트 목록이 있으므로 삭제할 수 없습니다 delete_title=목록 삭제 delete_rusure=메일 목록 $1을(를) 삭제하시겠습니까? 다음 파일이 삭제됩니다: delete_aliases=또한 다음 메일 별칭도 삭제됩니다: delete_ok=목록 삭제 - members_title=목록 구성원 members_desc=아래의 입력란을 사용하여 이 목록으로 전송된 메일을 받을 전자 메일 주소 목록을 편집하십시오. members_rodesc=아래의 입력란에는 이 목록에 보내는 메일을 받을 전자 메일 주소가 모두 나열됩니다. @@ -92,7 +86,6 @@ members_esub=이 목록에 주소를 가입하기 전에 유지보수 패스워 members_esubaddr=가입할 주소에는 전체 도메인 이름이 있어야 합니다(예: foo@bar.com) members_eunsub=이 목록에서 주소를 탈퇴하기 전에 유지보수 패스워드를 선택해야 합니다. members_eunsubaddr=탈퇴할 주소에는 전체 도메인 이름이 있어야 합니다(예: foo@bar.com) - info_title=메시지 및 설명 info_header=메시지 및 설명 info_desc=lists 명령에 대한 응답에 포함시킬 설명 나열 @@ -100,7 +93,6 @@ info_info=info $1 명령에 대한 응답으로 반환되는 메시지 info_intro=목록에 가입시킬 때 전송할 소개 메시지 info_same=정보 제공 메시지와 동일 info_below=아래에 입력된 대로.. - subs_title=가입 및 조정 subs_header=가입 및 조정 옵션 subs_sub=가입 정책 @@ -126,7 +118,6 @@ subs_eowner=없는 소유자 전자 메일 주소 subs_eapproval=없는 승인 전자 메일 주소 subs_emoderator=없거나 잘못된 조정자 주소 subs_epasswd=없거나 잘못된 패스워드 - mesg_title=전자 메일 옵션 mesg_header=발신 전자 메일 옵션 mesg_reply=회신자: 회신 전자 메일에 있는 주소 @@ -147,7 +138,6 @@ mesg_esender=없거나 잘못된 '발신자:' 주소 mesg_esender2='발신자:' 주소에 호스트 이름을 사용하면 안됩니다 mesg_ehost=없거나 잘못된 호스트 이름 mesg_emaxlength=없거나 잘못된 최대 메시지 크기 - access_title=액세스 제어 access_header=majordomo 명령의 액세스 제어 access_open=모두 @@ -170,20 +160,17 @@ access_res2=파일에 있는 주소 access_tbody=taboo 본문 정규식 access_theader=taboo 머리글 정규식 access_taboo=참고: 모든 taboo 및 주소 정규식은 /로 시작해서 /로 끝나야 합니다(예: /foobar.com/, /obscene/). - head_title=머리글 및 바닥글 head_header=회신 전자 메일 머리글 및 바닥글 head_fronter=회신 전자 메일 머리글 head_footer=회신 전자 메일 바닥글 head_headers=회신 전자 메일의 추가 SMTP 머리글 - misc_title=기타 옵션 misc_header=기타 목록 옵션 misc_munge=주소를 비교할 때만 도메인을 사용합니까? misc_debug=디버그 모드를 사용합니까? misc_info=정보 제공 메시지에 마지막으로 수정한 날짜를 포함시킵니까? misc_intro=소개 메시지에 마지막으로 수정한 날짜를 포함시킵니까? - digest_title=다이제스트 옵션 digest_header=다이제스트 생성 옵션 digest_name=다이제스트 제목 @@ -198,7 +185,6 @@ digest_edays=없거나 잘못된 일 수 digest_elines=없거나 잘못된 행 수 digest_evolume=없거나 잘못된 볼륨 번호 digest_eissue=없거나 잘못된 발행 번호 - log_global=글로벌 옵션 변경됨 log_create_list=메일 목록 $1 작성됨 log_create_digest=다이제스트 목록 $1 작성됨 @@ -215,7 +201,6 @@ log_access=목록 $1의 액세스 제어 업데이트됨 log_head=목록 $1의 머리글 및 바닥글 업데이트됨 log_misc=목록 $1의 기타 옵션 업데이트됨 log_digest=목록 $1의 다이제스트 옵션 업데이트됨 - acl_lists=이 사용자가 관리할 수 있는 메일 목록 acl_lall=모든 목록 acl_lsel=선택한 목록.. diff --git a/majordomo/lang/ko.auto b/majordomo/lang/ko.auto index 40d6aa703..08b5c3418 100644 --- a/majordomo/lang/ko.auto +++ b/majordomo/lang/ko.auto @@ -8,18 +8,14 @@ index_info=리스트 정보 index_mail=메일 주소 index_moderated=검토 됨 index_count=사용자 수 - global_saved=(저장) - create_archive=보관 메일 링리스트? create_archiveyear=연간 파일에서 create_archivemonth=월간 파일에서 create_archiveday=매일 파일에서 create_minimum=최소 필수 정보 - alias_err=별칭을 설정하지 못했습니다 alias_eowner=소유자 이메일 주소가 없습니다 - check_title=Majordomo 구성 확인 check_test=테스트. .. check_result=결과 / 추가 확인 diff --git a/majordomo/lang/lt.auto b/majordomo/lang/lt.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/lt.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/lv.auto b/majordomo/lang/lv.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/lv.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/ms.auto b/majordomo/lang/ms.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/ms.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/mt.auto b/majordomo/lang/mt.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/mt.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/nl b/majordomo/lang/nl index 061f8de90..4afc74d10 100644 --- a/majordomo/lang/nl +++ b/majordomo/lang/nl @@ -17,7 +17,6 @@ index_global=Bewerk Majordomo Opties index_globaldesc=Bewerk globale Majordomo opties die worden toegevoegd aan alle email lijsten. index_return=email lijsten index_version=Majordomo versie $1 - global_title=Globale Opties global_ecannot=U bent niet bevoegd om deze globale opties te bewerken global_header=Globale Majordomo opties @@ -30,7 +29,6 @@ global_ewhereami=Ontbrekende of ongeldige email server hostnaam global_ewhoami=Ontbrekende of ongeldig Majordomo adres global_eowner=Ontbrekend of ongeldig eigenaars adres global_esendmail=De opdracht om email te versturen '$1' bestaat niet - create_ecannot=U bent niet bevoegd om een nieuwe lijst te maken create_title=Maak Email Lijst create_header=Nieuwe lijst details @@ -54,7 +52,6 @@ create_archive=Maak een archief van email lijst? create_archiveyear=In jaarlijkse file create_archivemonth=In maandelijkse file create_archiveday=In dagelijkse file - cdigest_ecannot=U bent niet bevoegd om een nieuwe samenvatting lijst te maken cdigest_title=Maak Samenvatting Lijst cdigest_header=Nieuwe samenvatting lijst details @@ -71,21 +68,18 @@ cdigest_lines=Berichten totaal $1 regels cdigest_err=Mislukt om de samenvatting lijst te maken cdigest_edays=Ongeldig of ontbrekend aantal dagen cdigest_elines=Ongeldig of ontbrekend aantal regels - edit_title=Bewerk Email Lijst edit_ecannot=U bent niet bevoegd om deze email lijst te bewerken edit_delete=Verwijder Lijst edit_deletemsg=Verwijder deze lijst, inclusief alle geassocieerde files en email aliassen. edit_return=email lijst edit_for=Voor Lijst $1 - delete_ecannot=U bent niet bevoegd om deze email lijst weg te gooien delete_edigest=Deze lijst kan niet worden verwijderd omdat het erop lijkt dat hij associaties heeft met een samenvatting lijst. delete_title=Verwijder Lijst delete_rusure=Weet u zeker dat u de $1 email lijst wilt verwijderen? De volgende files zullen worden verwijdert : delete_aliases=De volgende email aliassen zullen ook verwijderd worden : delete_ok=Verwijder Lijst - members_title=Leden Lijst members_desc=Gebruik de tekst box hieronder om de email adressen lijst te bewerken die email ontvangen wat verstuurd word naar deze lijst. members_rodesc=De tekst box hieronder is een lijst van alle email adressen die email ontvangen wat verstuurd word naar deze lijst @@ -100,7 +94,6 @@ members_esub=U moet eerst een onderhouds wachtwoord kiezen voordat u adressen ga members_esubaddr=Het adres wat u toevoegt moet een volledige domein naam zijn, zoals foo@bar.com members_eunsub=U moet eerst een onderhouds wachtwoord kiezen voordat u adressen gaat verwijderen van deze lijst members_eunsubaddr=Het adres wat u verwijdert moet een volledige domein naam zijn, zoals foo@bar.com - info_title=Berichten en Omschrijvingen info_header=Berichten en omschrijvingen info_desc=Lijst omschrijving, die moet worden ingevoegd aan de lijsten opdracht @@ -108,7 +101,6 @@ info_info=Informatieve berichten die moeten worden terug gestuurd als reactie op info_intro=Introductie bericht, wanneer iemand zich inschrijft bij de lijst info_same=Zelfde als het informatieve bericht info_below=Zoals ingevuld hieronder .. - subs_title=Toevoegingen en Moderatie subs_header=Toevoeg en moderatie opties subs_sub=Toevoeg beleid @@ -134,7 +126,6 @@ subs_eowner=Ontbrekende eigenaars email adres subs_eapproval=Ontbrekende goedkeuring van email adres subs_emoderator=Ontbrekende of ongeldig moderator adres subs_epasswd=Ontbrekende of ongeldig wachtwoord - mesg_title=Email Opties mesg_header=Uitgaande email opties mesg_reply=Antwoord-Naar: adres in opnieuw verstuurde email @@ -155,7 +146,6 @@ mesg_esender=Ontbrekende of ongeldige Afzender: adres mesg_esender2=Afzender: adres moet niet inclusief hostnaam zijn mesg_ehost=Ontbrekende of ongeldige hostnaam mesg_emaxlength=Ontbrekende of ongeldige maximum berichten grootte - access_title=Toegang Controle access_header=Toegang controle voor de Majordomo opdrachten access_open=Iedereen @@ -178,20 +168,17 @@ access_res2=Adressen in file access_tbody=Taboe body regexps access_theader=Taboe header regexps access_taboo=Let OP: alle taboe en adres regexps moeten beginnen en eindigen met /, bijvoorbeeld /foobar.com/ or /onguur/. - head_title=Headers en Footers head_header=Opnieuw versturen van email headers en footers head_fronter=Opnieuw versturen van email header head_footer=Opnieuw versturen van email footer head_headers=Extra SMTP headers voor opnieuw versturen email - misc_title=Extra Opties misc_header=Extra lijst opties misc_munge=Gebruik domein alleen wanneer adressen worden vergeleken? misc_debug=Debug mode? misc_info=Inclusief de laatste gemodificeerde datum in de informatieve berichten? misc_intro=Inclusief de laatste gemodificeerde datum in de introductie berichten? - digest_title=Samenvatting Opties digest_header=Samenvatting genereer opties digest_name=Samenvatting titel @@ -206,7 +193,6 @@ digest_edays=Ontbrekende of ongeldig aantal dagen digest_elines=Ontbrekende of ongeldig aantal regels digest_evolume=Ontbrekende of ongeldig volume nummer digest_eissue=Ontbrekende of ongeldig kwestie nummer - log_global=Veranderde globale opties log_create_list=Aangemaakte email lijst $1 log_create_digest=Gemaakte samenvatting lijst $1 @@ -223,13 +209,11 @@ log_access=Ge-update toegang controle voor lijst $1 log_head=Geupdate headers en footers voor lijst $1 log_misc=Ge-update extra Opties voor lijst $1 log_digest=Geupdate samenvatting opties voor lijst $1 - acl_lists=Email lijsten die deze gebruiker mag beheren acl_lall=Alle lijsten acl_lsel=Geselecteerd. acl_global=Mag globale opties bewerken? acl_create=Mag een nieuwe email lijst maken? acl_edit=Mag de lidmaatschap lijst bewerken? - alias_err=Mislukt om aliassen in te stellen alias_eowner=Ontbrekende eigenaar email adres diff --git a/majordomo/lang/nl.auto b/majordomo/lang/nl.auto index aef9e8962..b0a83f64d 100644 --- a/majordomo/lang/nl.auto +++ b/majordomo/lang/nl.auto @@ -4,11 +4,8 @@ index_info=Lijstinfo index_mail=Mail adres index_moderated=Gemodereerd index_count=# gebruikers - global_saved=(opgeslagen) - create_minimum=Minimaal vereiste informatie - check_title=Controleer Majordomo Config check_test=Test voor. .. check_result=Resultaat / aanvullende controle diff --git a/majordomo/lang/no b/majordomo/lang/no index 4f5f47079..47c71b272 100644 --- a/majordomo/lang/no +++ b/majordomo/lang/no @@ -1,253 +1,236 @@ -index_title=Majordomo listeadministrator -index_econfig=Majordomo konfig.filen $1 finnes ikke. Kanskje modulkonfigurasjonen er feil, eller så er majordomo ikke installert. -index_eprograms=Majordomo katalogen $1 finnes ikke. Kanskje modulkonfigurasjonen er feil, eller så er majordomo ikke installert. -index_eversion=Din majordomo versjon støttes ikke av Webmin Bare versjon 1.94 og nyere er støttet. -index_eversion2=Majrodomo versjonsfilen $1 ble ikke funnet i programkatalogen $2. Kanskje modulkonfigurasjonen er feil, eller så er majordomo ikke installert. -index_emdomdir=$1 variablene i fin majordomo konfig.fil er satt til $2. Denne katalogen finnes ikke. -index_esendmail=$1 -innstillingen i modulkonfigurasjonen er satt til $2, som ikke eksisterer. Kanskje er modulkonfigurasjonen feil, eller så er det ikke installert noen mailer-deamon. -index_esendmail2=Sendmail er enten ikke installert eller satt opp riktig på systemet ditt. Sjekk Sendmail modul konfigurasjonen. -index_epostfix=Postfix er enten ikke installert eller ikke riktig satt opp på systemet ditt. Sjekk Postfix modulens konfigurasjon. -index_esendmail3=Sendmail Webmin modulen, som er nødvendig for å administrere aliaser, er ikke installert. -index_setupdesc=Majordomo er installert på systemet ditt, men er ikke satt opp riktig i sendmail aliases filen. -index_owner=Eiers e-post adresse -index_setup=Sett opp Aliaser -index_none=Du har ingen e-post lister definert -index_add=Legg til en ny e-post liste. -index_digest=Legg til en ny sammendrag liste. -index_global=Rediger Majordomo innstillinger -index_globaldesc=Rediger globale Majordomo innstillinger som gjelder for alle e-post lister. -index_return=e-post lister -index_version=Majordomo versjon $1 -index_name=Liste navn -index_info=Liste info -index_mail=E-post adresse -index_moderated=Moderert -index_count=ant. brukere - -global_title=Globale innstillinger -global_ecannot=Du har ikke lov til å redigere globale innstillinger -global_header=Globale Majordomo innstillinger -global_whereami=Vertsnavn for e-post tjenere ($whereami) -global_whoami=Majordomo master adresse -global_owner=Majordomo eiers adresse -global_sendmail=Sendmail kommando-sti -global_err=Kunne ikke lagre globale innstillinger -global_ewhereami=Manglende eller ugyldig vertsnavn for e-post tjener -global_ewhoami=Manglende eller ugyldig Majordomo adresse -global_eowner=Manglende eller ugyldig eiers adresse -global_esendmail=Sendmail kommandoen '$1' finnes ikke -global_saved=(lagret) - +access_adv=Ta med denne listen i svar på lists kommando for.. +access_adv0=Alle +access_adv1=Adresser som matcher regexps.. +access_adv2=Adresser som ikke matcher regexps.. +access_closed=Ingen +access_get=Tilgang til get kommando +access_header=Tilgangskontroll for majordomo kommandoer +access_index=Tilgang til index kommando +access_info=Tilgang til info kommando +access_intro=Tilgang til intro kommando +access_list=Liste medlemmer +access_open=Alle +access_res=Hvem kan sende til listen? +access_res0=Alle +access_res1=Liste medlemmer +access_res2=Adresser i filen +access_taboo=Merk: alle tabu og adresse reg.uttrykk må begynne og slutte med /, som /foobar.com/ eller /obscene/. +access_tbody=Taboo meldingstekst reg.uttrykk +access_theader=Taboo header reg.uttrykk +access_title=Tilgangskontroll +access_which=Tilgang til which kommando +access_who=Tilgang til who kommando +acl_create=Kan opprette nye e-post lister? +acl_edit=Kan redigere listemedlemskap? +acl_global=Kan redigere globale innstillinger? +acl_lall=Alle lister +acl_lists=E-post lister denne brukeren kan administrere +acl_lsel=Valgte.. +alias_eowner=Manglende eiers e-post adresse +alias_err=Kunne ikke sette opp aliaser +cdigest_desc=Beskrivelse +cdigest_ecannot=Du har ikke tilgang til å opprette nye sammendragslister +cdigest_edays=Ugyldig eller manglende antall dager +cdigest_elines=Ugyldig eller manglende antall linjer +cdigest_err=Kunne ikke opprette sammendragsliste +cdigest_footer=Sammendrag e-post sidehale +cdigest_header=Detaljer for ny sammendragsliste +cdigest_info=Introduksjonsmelding +cdigest_lines=Meldinger totalt $1 linjer +cdigest_list=Lag sammendrag av liste +cdigest_name=Liste navn +cdigest_old=Eldste melding er $1 dager gammel +cdigest_owner=Listevedlikeholders adresse +cdigest_password=Passord for vedlikehold +cdigest_title=Opprett sammendragsliste +cdigest_when=Send sammendrag når +check_exec=eksekverbar for alle! +check_perm=Tillatelser +check_possible=Mulig problem +check_read=lesbar for alle! +check_result=Resultat / ekstra sjekk +check_status=Status +check_test=Test for ... +check_title=Sjekk Majordomo konfig +check_write=skrivbar for alle! +create_archive=Arkiver e-post liste? +create_archiveday=I daglig fil +create_archivemonth=I månedlig fil +create_archiveyear=I årlig fil +create_desc=Beskrivelse +create_ealias=Et e-post alias for '$1' finnes allerede create_ecannot=Du har ikke tilgang til å opprette nye lister -create_title=Opprett e-post liste +create_eexists=En e-post liste med navn '$1' finnes allerede +create_emoderator=Ugyldig eller manglende moderators e-post adresse +create_ename=Ugyldig eller manglende listenavn +create_eowner=Ugyldig eller manglende eiers e-post adresse +create_epassword=Ugyldig eller manglende administrasjonspassord +create_err=Kunne ikke opprette e-post liste +create_footer=Bunntekst for videresendt e-post create_header=Detaljer for ny liste +create_info=Introduksjonsmelding +create_minimum=Minimum påkrevd informasjon +create_moderate=Moderert liste? +create_moderator=Moderators adresse create_name=Listenavn create_owner=Listens vedlikeholders adresse create_password=Vedlikeholdspassord -create_desc=Beskrivelse -create_info=Introduksjonsmelding -create_footer=Bunntekst for videresendt e-post -create_moderate=Moderert liste? -create_moderator=Moderators adresse create_same=Samme som vedlikeholder -create_err=Kunne ikke opprette e-post liste -create_ename=Ugyldig eller manglende listenavn -create_eexists=En e-post liste med navn '$1' finnes allerede -create_ealias=Et e-post alias for '$1' finnes allerede -create_eowner=Ugyldig eller manglende eiers e-post adresse -create_epassword=Ugyldig eller manglende administrasjonspassord -create_emoderator=Ugyldig eller manglende moderators e-post adresse -create_archive=Arkiver e-post liste? -create_archiveyear=I årlig fil -create_archivemonth=I månedlig fil -create_archiveday=I daglig fil -create_minimum=Minimum påkrevd informasjon - -cdigest_ecannot=Du har ikke tilgang til å opprette nye sammendragslister -cdigest_title=Opprett sammendragsliste -cdigest_header=Detaljer for ny sammendragsliste -cdigest_name=Liste navn -cdigest_list=Lag sammendrag av liste -cdigest_owner=Listevedlikeholders adresse -cdigest_password=Passord for vedlikehold -cdigest_desc=Beskrivelse -cdigest_info=Introduksjonsmelding -cdigest_footer=Sammendrag e-post sidehale -cdigest_when=Send sammendrag når -cdigest_old=Eldste melding er $1 dager gammel -cdigest_lines=Meldinger totalt $1 linjer -cdigest_err=Kunne ikke opprette sammendragsliste -cdigest_edays=Ugyldig eller manglende antall dager -cdigest_elines=Ugyldig eller manglende antall linjer - -edit_title=Rediger e-post liste -edit_ecannot=Du har ikke lov til å redigere denne e-post listen -edit_delete=Slett liste -edit_deletemsg=Slett denne listen, inkludert alle tilknyttede filer og e-post aliaser -edit_return=e-post liste -edit_for=For liste $1 - +create_title=Opprett e-post liste +delete_aliases=Følgende e-post alias vil også bli slettet delete_ecannot=Du har ikke lov til å slette denne e-post listen delete_edigest=Denne listen kan ikke slettes siden det ser ut til at den har en tilknyttet sammendragsliste -delete_title=Slett liste -delete_rusure=Er du sikker på at du ønsker å slette e-post listen $1? Følgende filer vil bli slettet : -delete_aliases=Følgende e-post alias vil også bli slettet delete_ok=Slett liste - -members_title=Liste medlemmer -members_desc=Bruk tekstboksen nedenfor til å redigere listen med e-post adresser som mottar e-post sendt til denne listen. -members_rodesc=Tekstboksen nedenfor viser alle e-post adresser som vil motta e-post sendt til denne listen. -members_sub=Tegn abonnment for adresse på listen +delete_rusure=Er du sikker på at du ønsker å slette e-post listen $1? Følgende filer vil bli slettet : +delete_title=Slett liste +digest_days=dager +digest_edays=Manglende eller ugyldig antall dager +digest_eissue=Manglende eller ugyldig utgave nummer +digest_elines=Manglende eller ugyldig antall linjer +digest_evolume=Manglende eller ugyldig volum nummer +digest_header=Innstillinger for generering av sammendrag +digest_issue=Gjeldende utgave nummer +digest_lines=linjer +digest_maxdays=Eldste meldingsalder før sending +digest_maxlines=Maks sammendrag størrelse før sending +digest_name=Sammendrag tittel +digest_title=Sammendrag innstillinger +digest_unlimited=Ubegrenset +digest_volume=Gjeldende volum nummer +edit_delete=Slett liste +edit_deletemsg=Slett denne listen, inkludert alle tilknyttede filer og e-post aliaser +edit_ecannot=Du har ikke lov til å redigere denne e-post listen +edit_for=For liste $1 +edit_return=e-post liste +edit_title=Rediger e-post liste +global_ecannot=Du har ikke lov til å redigere globale innstillinger +global_eowner=Manglende eller ugyldig eiers adresse +global_err=Kunne ikke lagre globale innstillinger +global_esendmail=Sendmail kommandoen '$1' finnes ikke +global_ewhereami=Manglende eller ugyldig vertsnavn for e-post tjener +global_ewhoami=Manglende eller ugyldig Majordomo adresse +global_header=Globale Majordomo innstillinger +global_owner=Majordomo eiers adresse +global_saved=(lagret) +global_sendmail=Sendmail kommando-sti +global_title=Globale innstillinger +global_whereami=Vertsnavn for e-post tjenere ($whereami) +global_whoami=Majordomo master adresse +head_footer=Bunntekst for e-post sendt på nytt +head_fronter=Topptekst for e-post sendt på nytt +head_header=Topp- og bunntekster for e-post sendt på nytt +head_headers=Ekstra SMTP headere for e-post sendt på nytt +head_title=Topp- og bunntekster +index_add=Legg til en ny e-post liste. +index_count=ant. brukere +index_digest=Legg til en ny sammendrag liste. +index_econfig=Majordomo konfig.filen $1 finnes ikke. Kanskje modulkonfigurasjonen er feil, eller så er majordomo ikke installert. +index_emdomdir=$1 variablene i fin majordomo konfig.fil er satt til $2. Denne katalogen finnes ikke. +index_epostfix=Postfix er enten ikke installert eller ikke riktig satt opp på systemet ditt. Sjekk Postfix modulens konfigurasjon. +index_eprograms=Majordomo katalogen $1 finnes ikke. Kanskje modulkonfigurasjonen er feil, eller så er majordomo ikke installert. +index_esendmail=$1 -innstillingen i modulkonfigurasjonen er satt til $2, som ikke eksisterer. Kanskje er modulkonfigurasjonen feil, eller så er det ikke installert noen mailer-deamon. +index_esendmail2=Sendmail er enten ikke installert eller satt opp riktig på systemet ditt. Sjekk Sendmail modul konfigurasjonen. +index_esendmail3=Sendmail Webmin modulen, som er nødvendig for å administrere aliaser, er ikke installert. +index_eversion=Din majordomo versjon støttes ikke av Webmin Bare versjon 1.94 og nyere er støttet. +index_eversion2=Majrodomo versjonsfilen $1 ble ikke funnet i programkatalogen $2. Kanskje modulkonfigurasjonen er feil, eller så er majordomo ikke installert. +index_global=Rediger Majordomo innstillinger +index_globaldesc=Rediger globale Majordomo innstillinger som gjelder for alle e-post lister. +index_info=Liste info +index_mail=E-post adresse +index_moderated=Moderert +index_name=Liste navn +index_none=Du har ingen e-post lister definert +index_owner=Eiers e-post adresse +index_return=e-post lister +index_setup=Sett opp Aliaser +index_setupdesc=Majordomo er installert på systemet ditt, men er ikke satt opp riktig i sendmail aliases filen. +index_title=Majordomo listeadministrator +index_version=Majordomo versjon $1 +info_below=Som angitt nedenfor.. +info_desc=Listebeskrivelse, som tas med i svar på lists kommandoen +info_header=Meldinger og beskrivelse +info_info=Informativ melding, som returneres som svar på kommandoen info $1 +info_intro=Introduksjonsmelding, som sendes når noen tegner abonnement på listen +info_same=Samme som informativ melding +info_title=Meldinger og beskrivelse +log_access=Oppdatert tilgangskontroll for liste $1 +log_auto=Oppdatert synkronisering for liste $1 +log_create_digest=Opprettet sammendragsliste $1 +log_create_list=Opprettet e-post liste $1 +log_delete_digest=Slettet sammendragsliste $1 +log_delete_list=Slettet e-post liste $1 +log_digest=Oppdaterte sammendragsinnstillinger for liste $1 +log_global=Endret globale innstillinger +log_head=Oppdaterte headere og footere for liste $1 +log_info=Oppdaterte meldinger og beskrivelse for liste $1 +log_members=Oppdaterte medlemmer av listen $1 +log_mesg=Oppdaterte e-post innstillinger for liste $1 +log_misc=Oppdaterte forskjellige innstillinger for liste $1 +log_subs=Oppdaterte abonnering og moderering for liste $1 +log_subscribe=Tegnet abonnement for $2 på listen $1 +log_unsubscribe=Avbestilte abonnement for $2 på listen $1 members_add=Legg til -members_unsub=Fjern adresse fra listen -members_rem=Fjern -members_sync=Synkroniser Unix brukere med liste? +members_desc=Bruk tekstboksen nedenfor til å redigere listen med e-post adresser som mottar e-post sendt til denne listen. members_dom=Domenenavn som skal legges til brukernavn members_eedit=Du har ikke lov til å redigere medlemmer i denne listen members_esub=Du må velge et vedlikeholdspassord før du tegner abonnement for adresser på denne listen. members_esubaddr=Adressen som skal abonnere må ha et fullt domenenavn, som f.eks. deg@domene.no members_eunsub=Du må velge et vedlikeholdspassord før du avbestiller abonnement for adresser på denne listen members_eunsubaddr=Adressen som skal avbestilles må ha fullt domenenavn som deg@domene.no - -info_title=Meldinger og beskrivelse -info_header=Meldinger og beskrivelse -info_desc=Listebeskrivelse, som tas med i svar på lists kommandoen -info_info=Informativ melding, som returneres som svar på kommandoen info $1 -info_intro=Introduksjonsmelding, som sendes når noen tegner abonnement på listen -info_same=Samme som informativ melding -info_below=Som angitt nedenfor.. - -subs_title=Abonnement og moderering -subs_header=Innstillinger for abonnering og moderering -subs_sub=Policy for tegning av abonnement -subs_sopen=Alle kan tegne abonnement for seg selv -subs_sauto=Alle kan tegne abonnement for hvem som helst -subs_closed=Vedlikeholders godkjenning påkrevd -subs_unsub=Policy for avbestilling av abonnement -subs_uopen=Alle kan avbestille abonnement for seg selv -subs_uauto=Alle kan avbestille abonnement for alle -subs_confirm=Krev bekreftelse av abonnementstegning? -subs_welcome=Send introduksjonsmelding? -subs_strip=Legg kun til rå adresse til listen? -subs_announcements=Gi beskjed til vedlikeholder om tegning og avbestilling av abonnement? -subs_administrivia=Videresend forespørsler om abonnment/avbestilling til vedlikeholder? -subs_passwd=Vedlikeholdspassord -subs_moderate=Moderert liste? -subs_moderator=Moderators adresse? -subs_maint=Vedlikeholder -subs_mpasswd=Passord for moderering -subs_owner=Eiers e-post adresse -subs_approval=E-post adresse for godkjenning -subs_eowner=Mangler eiers e-post adresse -subs_eapproval=Mangler e-post adresse for godkjenning -subs_emoderator=Manglende eller ugyldig moderator adresse -subs_epasswd=Manglende eller ugyldig passord - -mesg_title=E-post innstillinger -mesg_header=Innstillinger for utgående e-post -mesg_reply=Reply-To: adresse i resendt e-post -mesg_none=Ingen -mesg_sender=Sender: adresse i e-post -mesg_host=Vertsnavn for resendt e-post -mesg_subject=Subject: prefiks for resendt e-post -mesg_precedence=Policy for resendt e-post -mesg_first=Første klasse -mesg_special=Spesiallevering -mesg_list=Liste +members_rem=Fjern +members_rodesc=Tekstboksen nedenfor viser alle e-post adresser som vil motta e-post sendt til denne listen. +members_sub=Tegn abonnment for adresse på listen +members_sync=Synkroniser Unix brukere med liste? +members_title=Liste medlemmer +members_unsub=Fjern adresse fra listen mesg_bulk=Bulk -mesg_junk=Søppel -mesg_purge=Fjern Received: meldingshoder for resendt e-post -mesg_maxlength=Maks. tillatt meldingsstørrelse +mesg_ehost=Manglende eller ugyldig vertsnavn +mesg_emaxlength=Manglende eller ugyldig maks. meldingsstørrelse mesg_ereply=Manglende eller ugyldig Reply-To: adresse mesg_esender=Manglende eller ugyldig Sender: adresse mesg_esender2=Sender: adresse kan ikke inneholde et vertsnavn -mesg_ehost=Manglende eller ugyldig vertsnavn -mesg_emaxlength=Manglende eller ugyldig maks. meldingsstørrelse - -access_title=Tilgangskontroll -access_header=Tilgangskontroll for majordomo kommandoer -access_open=Alle -access_list=Liste medlemmer -access_closed=Ingen -access_get=Tilgang til get kommando -access_index=Tilgang til index kommando -access_info=Tilgang til info kommando -access_intro=Tilgang til intro kommando -access_which=Tilgang til which kommando -access_who=Tilgang til who kommando -access_adv=Ta med denne listen i svar på lists kommando for.. -access_adv0=Alle -access_adv1=Adresser som matcher regexps.. -access_adv2=Adresser som ikke matcher regexps.. -access_res=Hvem kan sende til listen? -access_res0=Alle -access_res1=Liste medlemmer -access_res2=Adresser i filen -access_tbody=Taboo meldingstekst reg.uttrykk -access_theader=Taboo header reg.uttrykk -access_taboo=Merk: alle tabu og adresse reg.uttrykk må begynne og slutte med /, som /foobar.com/ eller /obscene/. - -head_title=Topp- og bunntekster -head_header=Topp- og bunntekster for e-post sendt på nytt -head_fronter=Topptekst for e-post sendt på nytt -head_footer=Bunntekst for e-post sendt på nytt -head_headers=Ekstra SMTP headere for e-post sendt på nytt - -misc_title=Forskjellige innstillinger -misc_header=Forskjellige liste-innstillinger -misc_munge=Bruk domene bare ved sammenligning av adresser? +mesg_first=Første klasse +mesg_header=Innstillinger for utgående e-post +mesg_host=Vertsnavn for resendt e-post +mesg_junk=Søppel +mesg_list=Liste +mesg_maxlength=Maks. tillatt meldingsstørrelse +mesg_none=Ingen +mesg_precedence=Policy for resendt e-post +mesg_purge=Fjern Received: meldingshoder for resendt e-post +mesg_reply=Reply-To: adresse i resendt e-post +mesg_sender=Sender: adresse i e-post +mesg_special=Spesiallevering +mesg_subject=Subject: prefiks for resendt e-post +mesg_title=E-post innstillinger misc_debug=Debug modus? +misc_header=Forskjellige liste-innstillinger misc_info=Ta med dato for siste endring i informativ melding? misc_intro=Ta med dato for siste endring i introduksjonsmelding? - -digest_title=Sammendrag innstillinger -digest_header=Innstillinger for generering av sammendrag -digest_name=Sammendrag tittel -digest_maxdays=Eldste meldingsalder før sending -digest_days=dager -digest_lines=linjer -digest_maxlines=Maks sammendrag størrelse før sending -digest_volume=Gjeldende volum nummer -digest_issue=Gjeldende utgave nummer -digest_unlimited=Ubegrenset -digest_edays=Manglende eller ugyldig antall dager -digest_elines=Manglende eller ugyldig antall linjer -digest_evolume=Manglende eller ugyldig volum nummer -digest_eissue=Manglende eller ugyldig utgave nummer - -log_global=Endret globale innstillinger -log_create_list=Opprettet e-post liste $1 -log_create_digest=Opprettet sammendragsliste $1 -log_delete_list=Slettet e-post liste $1 -log_delete_digest=Slettet sammendragsliste $1 -log_subscribe=Tegnet abonnement for $2 på listen $1 -log_unsubscribe=Avbestilte abonnement for $2 på listen $1 -log_members=Oppdaterte medlemmer av listen $1 -log_auto=Oppdatert synkronisering for liste $1 -log_info=Oppdaterte meldinger og beskrivelse for liste $1 -log_subs=Oppdaterte abonnering og moderering for liste $1 -log_mesg=Oppdaterte e-post innstillinger for liste $1 -log_access=Oppdatert tilgangskontroll for liste $1 -log_head=Oppdaterte headere og footere for liste $1 -log_misc=Oppdaterte forskjellige innstillinger for liste $1 -log_digest=Oppdaterte sammendragsinnstillinger for liste $1 - -acl_lists=E-post lister denne brukeren kan administrere -acl_lall=Alle lister -acl_lsel=Valgte.. -acl_global=Kan redigere globale innstillinger? -acl_create=Kan opprette nye e-post lister? -acl_edit=Kan redigere listemedlemskap? - -alias_err=Kunne ikke sette opp aliaser -alias_eowner=Manglende eiers e-post adresse - -check_title=Sjekk Majordomo konfig -check_test=Test for ... -check_result=Resultat / ekstra sjekk -check_status=Status -check_perm=Tillatelser -check_exec=eksekverbar for alle! -check_write=skrivbar for alle! -check_read=lesbar for alle! -check_possible=Mulig problem +misc_munge=Bruk domene bare ved sammenligning av adresser? +misc_title=Forskjellige innstillinger +subs_administrivia=Videresend forespørsler om abonnment/avbestilling til vedlikeholder? +subs_announcements=Gi beskjed til vedlikeholder om tegning og avbestilling av abonnement? +subs_approval=E-post adresse for godkjenning +subs_closed=Vedlikeholders godkjenning påkrevd +subs_confirm=Krev bekreftelse av abonnementstegning? +subs_eapproval=Mangler e-post adresse for godkjenning +subs_emoderator=Manglende eller ugyldig moderator adresse +subs_eowner=Mangler eiers e-post adresse +subs_epasswd=Manglende eller ugyldig passord +subs_header=Innstillinger for abonnering og moderering +subs_maint=Vedlikeholder +subs_moderate=Moderert liste? +subs_moderator=Moderators adresse? +subs_mpasswd=Passord for moderering +subs_owner=Eiers e-post adresse +subs_passwd=Vedlikeholdspassord +subs_sauto=Alle kan tegne abonnement for hvem som helst +subs_sopen=Alle kan tegne abonnement for seg selv +subs_strip=Legg kun til rå adresse til listen? +subs_sub=Policy for tegning av abonnement +subs_title=Abonnement og moderering +subs_uauto=Alle kan avbestille abonnement for alle +subs_unsub=Policy for avbestilling av abonnement +subs_uopen=Alle kan avbestille abonnement for seg selv +subs_welcome=Send introduksjonsmelding? diff --git a/majordomo/lang/no.auto b/majordomo/lang/no.auto new file mode 100644 index 000000000..3818abc33 --- /dev/null +++ b/majordomo/lang/no.auto @@ -0,0 +1,17 @@ +index_esendmail=$1 -innstillingen av modulkonfigurasjonen er satt til $2, som ikke eksisterer. Kanskje er modulkonfigurasjonen feil, eller ingen mailer-deamon er installert. +index_name=Liste navn +index_info=Listeinfo +index_mail=E-postadresse +index_moderated=Moderert +index_count=antall brukere +global_saved=(Lagret) +create_minimum=Minimum nødvendig informasjon +check_title=Sjekk Majordomo Config +check_test=Test for. .. +check_result=Resultat / tilleggssjekk +check_status=Status +check_perm=tillatelser +check_exec=verdens kjørbar! +check_write=verden skrivbar! +check_read=verden lesbar! +check_possible=Mulig problem diff --git a/majordomo/lang/pl.auto b/majordomo/lang/pl.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/pl.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/pt.auto b/majordomo/lang/pt.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/pt.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/pt_BR.auto b/majordomo/lang/pt_BR.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/pt_BR.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/ro.auto b/majordomo/lang/ro.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/ro.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/ru b/majordomo/lang/ru index dc855af42..945f1cfdb 100644 --- a/majordomo/lang/ru +++ b/majordomo/lang/ru @@ -14,7 +14,6 @@ index_global=Редактирование настроек Majordomo index_globaldesc=Редактирование общих настроек Majordomo, применяемых ко всем спискам рассылки index_return=списки рассылки index_version=Majordomo версии $1 - global_title=Общие параметры global_ecannot=Вам запрещено редактировать общие параметры global_header=Общие параметры Majordomo @@ -27,7 +26,6 @@ global_ewhereami=Не указано или некорректное имя уз global_ewhoami=Не указан или некорректен адрес Majordomo global_eowner=Не указан или некорректен адрес владельца global_esendmail=Команда sendmail '$1' не существует - create_ecannot=Вам запрещено создавать новые списки create_title=Создание списка рассылки create_header=Параметры нового списка @@ -51,7 +49,6 @@ create_archive=Архивировать список? create_archiveyear=Ежегодно create_archivemonth=Ежемесячно create_archiveday=Ежедневно - cdigest_ecannot=Вам запрещено создавать новый дайджест cdigest_title=Создание дайджеста cdigest_header=Параметры дайджеста @@ -68,21 +65,18 @@ cdigest_lines=Всего в сообщениях $1 строк cdigest_err=Ошибка при создании дайджеста cdigest_edays=Некорректно или не указано количество дней cdigest_elines=Некорректно или не указано количество строк - edit_title=Редактировать список рассылки edit_ecannot=Вам запрещено редактировать этот список рассылки edit_delete=Удаление списка edit_deletemsg=Удалить этот список, включая все связанные файлы и адреса edit_return=список рассылки edit_for=Для списка $1 - delete_ecannot=Вам запрещено удалять этот список рассылки delete_edigest=Этот список не может быть удален, так как с ним связаны списки дайджестов delete_title=Удаление списка delete_rusure=Вы уверены, что хотите удалить список рассылки $1? Будут удалены следующие файлы : delete_aliases=Также будут удалены следующие псевдонимы почты : delete_ok=Удалить список - members_title=Члены списка members_desc=Используйте поле ниже для редактирования списка адресов, получающих почту, идущую на этот список рассылки. members_rodesc=В текстовом поле ниже указаны все адреса, получающие почту, идущую на этот список рассылки. @@ -97,7 +91,6 @@ members_esub=Вы должны указать пароль ответствен members_esubaddr=Адрес должен иметь полное доменное имя, например foo@bar.com members_eunsub=Вы должны указать пароль ответственного перед удалением адреса из списка members_eunsubaddr=Адрес должен иметь полное доменное имя, например foo@bar.com - info_title=Сообщения и описания info_header=Сообщения и описания info_desc=Список описаний, подключаемых к ответам на команды списков @@ -105,7 +98,6 @@ info_info=Информационное сообщение, возвращаем info_intro=Вводное сообщение, отправляемое вновь подписанным на список info_same=Как информационное сообщение info_below=Введенное ниже.. - subs_title=Подписка на списки и модерирование subs_header=Подписка на списки и параметры модерирования subs_sub=Политики подписки @@ -131,7 +123,6 @@ subs_eowner=Не указан адрес email владельца subs_eapproval=Не указан адрес email подтверждений subs_emoderator=Не указан или некорректный адрес модератора subs_epasswd=Не указан или некорректный пароль - mesg_title=Параметры адреса email mesg_header=Параметры исходящей почты mesg_reply=Ответ: адрес пересланной почты @@ -152,7 +143,6 @@ mesg_esender=Не указан или некорректный адрес Sender mesg_esender2=Sender: адрес не должен включать в себя имя ушла mesg_ehost=Не указано или некорректное имя узла mesg_emaxlength=Не указан или некорректный максимальный размер сообщения - access_title=Управление доступом access_header=Управление доступом к командам majordomo access_open=Любой @@ -175,20 +165,17 @@ access_res2=Адреса в файле access_tbody=Регулярные выражения тел запрещенных сообщений access_theader=Регулярные выражения заголовков запрещенных сообщений access_taboo=Замечание: все регулярные выражения запретов и адресов должны начинаться и заканчиваться на /, например /foobar.com/ или /obscene/. - head_title=Заголовки и подписи head_header=Заголовки и подписи пересланных сообщений head_fronter=Заголовок пересланного сообщения head_footer=Подпись пересланного сообщения head_headers=Дополнительные заголовки SMTP для пересланных сообщений - misc_title=Разные параметры misc_header=Разные параметры списка misc_munge=Использовать только домен для сравнения адресов? misc_debug=Режим отладки? misc_info=Включить в информационное сообщение дату последнего изменения? misc_intro=Включить во вводное сообщение дату последнего изменения? - digest_title=Параметры дайджеста digest_header=Параметры создания дайджеста digest_name=Заголовок дайджеста @@ -203,7 +190,6 @@ digest_edays=Не указано или некорректное число дн digest_elines=Не указано или некорректное число строк digest_evolume=Не указан или некорректный номер тома digest_eissue=Не указан или некорректный номер выпуска - log_global=Изменены общие параметры log_create_list=Создан список рассылки $1 log_create_digest=Создан список дайджестов $1 @@ -220,13 +206,11 @@ log_access=Обновлено управление доступом для сп log_head=Обновлены заголовки и подписи для списка $1 log_misc=Обновлены разные параметры для списка $1 log_digest=Обновлены параметры дайджеста для списка $1 - acl_lists=Списки рассылки, управляемые этим пользователем acl_lall=Все списки acl_lsel=Выбранные.. acl_global=Можно изменять общие параметры? acl_create=Можно создавать новые списки рассылки? acl_edit=Можно редактировать членство в списке? - alias_err=Ошибка при настройке псевдонимов alias_eowner=Не указан адрес email владельца diff --git a/majordomo/lang/ru.auto b/majordomo/lang/ru.auto index d4a789111..340dfae18 100644 --- a/majordomo/lang/ru.auto +++ b/majordomo/lang/ru.auto @@ -7,11 +7,8 @@ index_info=Список информации index_mail=Почтовый адрес index_moderated=Модерируемый index_count=Количество пользователей - global_saved=(Сохранены) - create_minimum=Минимально необходимая информация - check_title=Проверьте Majordomo Config check_test=Тест на. .. check_result=Результат / дополнительная проверка diff --git a/majordomo/lang/sk.auto b/majordomo/lang/sk.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/sk.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/sl.auto b/majordomo/lang/sl.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/sl.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/sv b/majordomo/lang/sv index 9af2eb4ad..4e8579344 100644 --- a/majordomo/lang/sv +++ b/majordomo/lang/sv @@ -13,7 +13,6 @@ index_digest=Lägg till en sammanfattande e-postlista index_global=Ändra inställningar för Majordomo index_globaldesc=Ändra globala Majordomo-inställningar som gäller för alla malilinglistor index_return=e-postlistor - global_title=Globala inställningar global_ecannot=Du får inte ändra globala inställningar global_header=Globala inställningar för Majordomo @@ -26,7 +25,6 @@ global_ewhereami=Namn på e-postservern saknas eller är ogiltigt global_ewhoami=Majordomo-adress saknas eller är ogiltig global_eowner=Ägaradress saknas eller är ogiltig global_esendmail=Sendmail-kommandot '$1' finns inte - create_ecannot=Du får inte skapa nya listor create_title=Skapa e-postlista create_header=Uppgifter om ny lista @@ -46,21 +44,18 @@ create_ealias=Det finns redan ett mailalias för '$1' create_eowner=Ägaradress saknas eller är ogiltig create_epassword=Administrationslösenord saknas eller är ogiltigt create_emoderator=Moderatorns adress saknas eller är ogiltig - edit_title=Ändra e-postlista edit_ecannot=Du får inte ändra denna e-postlista edit_delete=Ta bort lista edit_deletemsg=Tar bort denna lista inklusive tillhörande filer och mailalias edit_return=e-postlista edit_for=För lista $1 - delete_ecannot=Du får inte ta bort denna e-postlista delete_edigest=Det går inte att ta bort denna lista eftersom den verkar ha en sammanfattande e-postlista kopplad till sig delete_title=Ta bort listan delete_rusure=Vill du verkligen ta bort e-postlistan $1? Följande filer kommer att tas bort: delete_aliases=Följande mailalias kommer också att tas bort: delete_ok=Ta bort listan - members_title=Listmedlemmar members_desc=Använd textrutan nedan för att ändra i listan över de e-postadresser som ska få e-post som skickas till denna lista. members_rodesc=I textrutan nedan visas alla e-postadresser som får e-post skickad till denna lista. @@ -75,7 +70,6 @@ members_esub=Du måste ange ett administrationslösenord innan du lägger till a members_esubaddr=Adressen som ska läggas till måste ha ett fullständigt domännamn, t ex foo@bar.com members_eunsub=Du måste ange ett administratörslösenord innan du tar bort adresser från listan members_eunsubaddr=Adressen som ska tas bort måste ha ett fullständigt domännamn, t ex foo@bar.com - info_title=Meddelanden och beskrivning info_header=Meddelanden och beskrivning info_desc=Listbeskrivning som ska bifogas i svaret till kommandot lists @@ -83,7 +77,6 @@ info_info=Informativt meddelande som ska skickas som svar på kommandot info info_intro=Introduktionsmeddelande som skickas när någon läggs till listan info_same=Samma som det informativa meddelandet info_below=Angivet nedan - subs_title=Tillägg och moderering subs_header=Inställningar för tillägg och moderering subs_sub=Tilläggspolicy @@ -109,7 +102,6 @@ subs_eowner=Ägarens e-postadress saknas subs_eapproval=E-postadress för godkännande saknas subs_emoderator=Moderatorns adress saknas eller är ogiltig subs_epasswd=Lösenord saknas eller är ogiltigt - mesg_title=E-postinställningar mesg_header=Inställningar för utgående e-post mesg_reply=Reply-To:-adress i vidareskickad e-post @@ -130,7 +122,6 @@ mesg_esender=Sender:-adress saknas eller är ogiltig mesg_esender2=Sender:-adressen får inte innehålla ett datornamn mesg_ehost=Datornamn saknas eller är ogiltigt mesg_emaxlength=Maximal meddelandestorlek saknas eller är ogiltig - access_title=Kontroll access_header=Kontroll av tillgång till majordomo-kommandon access_open=Vem som helst @@ -153,20 +144,17 @@ access_res2=Adresser i filen access_tbody=Reguljära uttryck för tabubelagda saker i meddelandekroppen access_theader=Reguljära uttryck för tabubelagda saker i meddelandehuvudet access_taboo=Obs: alla tabu- och adressuttryck (reguljära) måste börja och sluta med /, t ex /foobar.com/ eller /obscene/. - head_title=Huvuden och sidfötter head_header=E-posthuvuden och -fötter för återsänd e-post head_fronter=Huvud för återsänd e-post head_footer=Sidfot för återsänd e-post head_headers=Extra SMTP-huvuden för återsänd e-post - misc_title=Blandade inställningar misc_header=Blandade inställningar för listor misc_munge=Endast använda domänen när adresser jämförs? misc_debug=Debugmod? misc_info=Sätta in "ändrad senast"-datum i det informativa meddelandet? misc_intro=Sätta in "ändrad senast"-datum i introduktionsmeddelandet? - digest_title=Inställningar för sammanfattningar digest_header=Inställningar för generering av sammanfattningar digest_name=Namn på sammanfattning @@ -181,7 +169,6 @@ digest_edays=Antalet dagar saknas eller är ogiltigt digest_elines=Antalet rader saknas eller är ogiltigt digest_evolume=Volymnummer saknas eller är ogiltigt digest_eissue=Utgåvenummer saknas eller är ogiltigt - log_global=Ändrade globala inställningar log_create_list=Skapade e-postlista $1 log_create_digest=Skapade sammanfattande lista $1 @@ -198,7 +185,6 @@ log_access=Uppdaterade kommandotillgångskontroll för lista $1 log_head=Uppdaterade huvuden och sidfötter för lista $1 log_misc=Uppdaterade blandade inställningar för lista $1 log_digest=Uppdaterade sammanfattningsinställningar för lista $1 - acl_lists=E-postlistor som denna användare får råda över acl_global=Kunna ändra globala inställningar? acl_create=Kunna skapa nya e-postlistor? diff --git a/majordomo/lang/sv.auto b/majordomo/lang/sv.auto index b81cb3753..a51468a8b 100644 --- a/majordomo/lang/sv.auto +++ b/majordomo/lang/sv.auto @@ -8,15 +8,12 @@ index_info=Listinfo index_mail=E-postadress index_moderated=Modererad index_count=antal användare - global_saved=(Sparade) - create_archive=Arkivera postlista? create_archiveyear=I årlig fil create_archivemonth=I månadsfil create_archiveday=I daglig fil create_minimum=Minsta obligatorisk information - cdigest_ecannot=Du har inte tillåtelse att skapa nya digest-listor cdigest_title=Skapa digestlista cdigest_header=Nya detaljer för detaljerad lista @@ -33,13 +30,10 @@ cdigest_lines=Meddelanden totalt $1 rader cdigest_err=Det gick inte att skapa listan över upptagning cdigest_edays=Ogiltigt eller saknat antal dagar cdigest_elines=Ogiltigt eller saknat antal rader - acl_lall=Alla listor acl_lsel=Vald .. - alias_err=Det gick inte att konfigurera alias alias_eowner=E-postadress saknas - check_title=Kolla Majordomo Config check_test=Test för. .. check_result=Resultat / ytterligare kontroll diff --git a/majordomo/lang/th.auto b/majordomo/lang/th.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/th.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/tr b/majordomo/lang/tr index 0ffa751e8..9e6e78a2a 100644 --- a/majordomo/lang/tr +++ b/majordomo/lang/tr @@ -13,7 +13,6 @@ index_digest=Yeni bir özet liste oluştur index_global=Majordomo Seçneklerini Değiştir index_globaldesc=Bütün posta listelerine uygulanacak olan genel majordomo seçenkelerini değiştir index_return=posta listeleri - global_title=Genel Seçenekler global_ecannot=Genel seçenekleri değiştirmek için izininiz yoktur. global_header=Genel Majordomo seçenekleri @@ -26,7 +25,6 @@ global_ewhereami=Kayıp ya da yanlış posta sunucusu makine adı global_ewhoami=Kayıp ya da yanlış Majordomo adresi global_eowner=Kayıp ya da yanlış sahip adresi global_esendmail=Sendmail komutu '$1' mevcut değil - create_ecannot=Yeni liste oluşturmak için izininiz yoktur create_title=Yeni posta listesi oluştur create_header=Yeni liste ayrıntıları @@ -46,21 +44,18 @@ create_ealias=Posta takma ismi '$1' her zaman mevcut create_eowner=Kayıp ya da yanlış sahip adresi create_epassword=Kayıp ya da yanlış yönetici şifresi create_emoderator=Kayıp ya da yanlış moderatör e-posta adresi - edit_title=Posta Listesi Değiştir edit_ecannot=Bu posta listesini değiştirmek için izininiz yoktur edit_delete=Listeyi Sil edit_deletemsg=Bu listeyi ve beraberindeki postalarla, posta takma isimleri sil edit_return=posta listesi edit_for=$1 listesi için - delete_ecannot=Bu posta listesini silmek için izininiz yoktur delete_edigest=Bu liste bir özet listeye sahip olduğundan silinemez delete_title=Liste Sil delete_rusure=Posta listesi $1 silmek istediğinizden emin misiniz? Takip eden dosyalar silenecektir : delete_aliases=Takip eden posta listeleri silinmiş olabilir : delete_ok=Listeyi Sil - members_title=Liste Üyeleri members_desc=Takip eden düz metin yazısı kutusundaki e-posta adreslerini değiştirerek bu listeye posta gönderebilecek olan adresleri belirleyebilirsiniz. members_rodesc=Takip eden düz metin yazısı kutusundaki adresler bu listeden posta alacak olan adreslerdir. @@ -75,7 +70,6 @@ members_esub=Listeye adres eklemeden önce yönetici şifresini girmelisiniz. members_esubaddr=Eklenecek adres tam alan adına sahip olmalıdır, örneğin foo@bar.com members_eunsub=Listeden adres silmeden önce yönetici şifresini girmelisiniz. members_eunsubaddr=Silinecek adres tam alan adına sahip olmalıdır, örneğin foo@bar.com - info_title=Mesajlar ve Açıklama info_header=Mesajlar ve açıklama info_desc=Liste açıklaması, lists komutunda listenin karşısında açıklama olarak görülen kısımdır @@ -83,7 +77,6 @@ info_info=Bilgi verici mesaj, info $1 komutunun çıktısı olarak gör info_intro=Giriş mesajı, biri listeye üye olduğunda ona gönderilecek olan mesajdır. info_same=Bilgi verici mesajla aynı info_below=Aşağıda girildiği gibi.. - subs_title=Üyelik ve Moderasyon subs_header=Üyelik ve moderasyon seçenekleri subs_sub=Üyelik politikası @@ -109,7 +102,6 @@ subs_eowner=Sahip e-posta adresi bulunmadı subs_eapproval=Onaylama e-posta adresi bulunmadı subs_emoderator=Kayıp ya da yanlış moderatör adresi subs_epasswd=Kayıp ya da yanlış şifre - mesg_title=E-posta Seçenekleri mesg_header=Dışa giden e-posta seçenekleri mesg_reply=Reply-To: geri gönderilecek e-posta adresi @@ -130,7 +122,6 @@ mesg_esender=Kayıp ya da yanlış Sender: adresi mesg_esender2=Sender: adres bir makine adı içermiyor. mesg_ehost=Kayıp ya da yanlış makine adı mesg_emaxlength=Kayıp ya da yanlış en çok mesaj boyutu - access_title=Giriş Kontrolü access_header=Majordomo komutları için giriş kontrolü access_open=Herkes @@ -153,20 +144,17 @@ access_res2=Dosyadaki adresler access_tbody=Posta içeriğindeki yasak kelimeler access_theader=Posta başlığındaki yasak kelimeler access_taboo=Not: bütün yasak kelimeler ve adres tanımlamaları / ile başlamalı ve bitmelidir, örnek:/microsoft.com ya da /obscene/ - head_title=Başlıklar ve Dipnotlar head_header=Eposta başlık ve dipnotlarını tekrar gönder head_fronter=Eposta başlıklarını tekrar gönder head_footer=Eposta dipnotlarını tekrar gönder head_headers=Tekrar gönderilen e-postalar için ek SMTP başlıkları - misc_title=Çeşitli Seçenekler misc_header=Çeşitli liste seçenekleri misc_munge=Alanı, yalnızca adresler karşılaştırıldığında kullan? misc_debug=Hatasızlaştırma modu? misc_info=Bilgilendirici mesaj son değiştirilme tarihini içersin mi? misc_intro=Giriş mesajı son değiştirilme tarihini içersin mi? - digest_title=Özet Liste Seçenekleri digest_header=Özet liste oluşturma seçenekleri digest_name=Özet liste başlığı @@ -181,7 +169,6 @@ digest_edays=Kayıp ya da yanlış gün sayısı digest_elines=Kayıp ya da yanlış satır sayısı digest_evolume=Kayıp ya da yanlış e-posta numarası digest_eissue=Kayıp ya da yanlış konu numarası - log_global=Genel seçenekler değiştirildi log_create_list=Posta listesi oluşturuldu $1 log_create_digest=Oluşturulan özet listesi $1 diff --git a/majordomo/lang/tr.auto b/majordomo/lang/tr.auto index 52053fbc8..489100f35 100644 --- a/majordomo/lang/tr.auto +++ b/majordomo/lang/tr.auto @@ -8,15 +8,12 @@ index_info=Liste bilgisi index_mail=Posta adresi index_moderated=Sorumlu index_count=kullanıcı sayısı - global_saved=(Kayıtlı) - create_archive=Posta listesi arşivlensin mi? create_archiveyear=Yıllık dosyada create_archivemonth=Aylık dosyada create_archiveday=Günlük dosyada create_minimum=Gerekli minimum bilgiler - cdigest_ecannot=Yeni özet listeleri oluşturma izniniz yok cdigest_title=Özet Listesi Oluştur cdigest_header=Yeni özet listesi ayrıntıları @@ -33,17 +30,14 @@ cdigest_lines=Toplam ileti sayısı $1 satır cdigest_err=Özet listesi oluşturulamadı cdigest_edays=Geçersiz veya eksik gün sayısı cdigest_elines=Geçersiz veya eksik satır sayısı - acl_lists=Bu kullanıcının yönetebileceği posta listeleri acl_lall=Tüm listeler acl_lsel=Seçilen .. acl_global=Global seçenekleri düzenleyebilir mi? acl_create=Yeni posta listeleri oluşturabilir mi? acl_edit=Liste üyeliğini düzenleyebilir mi? - alias_err=Takma adlar kurulamadı alias_eowner=Eksik sahip e-posta adresi - check_title=Majordomo Yapılandırmasını Kontrol Edin check_test=İçin test. .. check_result=Sonuç / ek kontrol diff --git a/majordomo/lang/uk b/majordomo/lang/uk index e549a5dd1..c54647d50 100644 --- a/majordomo/lang/uk +++ b/majordomo/lang/uk @@ -1,232 +1,216 @@ -index_title=Менеджер списків розсилання Majordomo -index_econfig=Файл настроювань majordomo $1 не існує. Можливо некоректні настроювання модуля, або majordomo не встановлений. -index_eprograms=Каталог majordomo $1 не існує. Можливо некоректні настроювання модуля, або majordomo не встановлений. -index_eversion=Ваша версія majordomo не підтримується Webmin. Підтримуються тільки версії 1.94 і вище. -index_emdomdir=Перемінна $1 у вашому файлі настроювань majordomo встановлена в $2, чого не існує. -index_esendmail=Файл настроювань sendmail $1 не існує. Перевірте настроювання модуля Sendmail. -index_setupdesc=Majordomo установлений на вашій системі, але не набудований у файлі псевдонімів sendmail (aliases). -index_owner=Власник адреси email -index_setup=Настроювання псевдонімів -index_none=У вас немає визначених списків розсилання -index_add=Додати новий список розсилання -index_digest=Додати новий файл дайджест -index_global=Редагування настроювань Majordomo -index_globaldesc=Редагування загальних настроювань Majordomo, застосовуваних до всіх списків розсилання -index_return=списки розсилання -index_version=Majordomo версії $1 - -global_title=Загальні параметри -global_ecannot=Вам заборонено редагувати загальні параметри -global_header=Загальні параметри Majordomo -global_whereami=Ім'я сервера пошти ($whereami) -global_whoami=Головна адреса Majordomo -global_owner=Адреса власника Majordomo -global_sendmail=Шлях до команди sendmail -global_err=Помилка при збереженні загальних параметрів -global_ewhereami= чиНе зазначене некоректне ім'я вузла поштового сервера -global_ewhoami= чиНе зазначений некоректна адреса Majordomo -global_eowner= чиНе зазначений некоректна адреса власника -global_esendmail=Команда sendmail '$1' не існує - -create_ecannot=Вам заборонено створювати нові списки -create_title=Створення списку розсилання -create_header=Параметри нового списку -create_name=Назва списку -create_owner=Адреса відповідального за список -create_password=Пароль відповідального -create_desc=Опис -create_info=Вступне повідомлення -create_footer=Підпис повідомлення, що пересилається -create_moderate=Список модерований? -create_moderator=Адреса модератора -create_same=Як у відповідального -create_err=помилка при створенні списку розсилання -create_ename=Назва списку чи некоректно не зазначене -create_eexists=Список розсилання з назвою '$1' вже існує -create_ealias=Поштовий псевдонім для '$1' вже існує -create_eowner=Некоректний чи не зазначений адреса власника списку -create_epassword=Некоректний чи не зазначений пароль адміністратора -create_emoderator=Некоректний чи не зазначений адреса відповідального за список -create_archive=Архівувати список? -create_archiveyear=Щорічно -create_archivemonth=Щомісяця -create_archiveday=Щодня - -cdigest_ecannot=Вам заборонено створювати новий дайджест -cdigest_title=Створення дайджесту -cdigest_header=Параметри дайджесту -cdigest_name=Назва списку -cdigest_list=Створити дайджест зі списку -cdigest_owner=Список адрес відповідальних -cdigest_password=Паролі відповідальних -cdigest_desc=Опис -cdigest_info=Вступне повідомлення -cdigest_footer=Підпис повідомлення дайджесту -cdigest_when=Відправляти дайджест, якщо -cdigest_old=Самому старому повідомленню $1 днів. -cdigest_lines=Усього в повідомленнях $1 рядків -cdigest_err=Помилка при створенні дайджесту -cdigest_edays= чиНекоректно не зазначена кількість днів -cdigest_elines= чиНекоректно не зазначена кількість рядків - -edit_title=Редагувати список розсилання -edit_ecannot=Вам заборонено редагувати цей список розсилання -edit_delete=Видалення списку -edit_deletemsg=Видалити цей список, включаючи всі зв'язані файли й адреси -edit_return=список розсилання -edit_for=Для списку $1 - -delete_ecannot=Вам заборонено видаляти цей список розсилання -delete_edigest=Цей список не може бути вилучений, тому що з ним зв'язані списки дайджестів -delete_title=Видалення списку -delete_rusure=Ви упевнені, що хочете видалити список розсилання $1? Будуть вилучені наступні файли : -delete_aliases=Також будуть вилучені наступні псевдоніми пошти : -delete_ok=Видалити список - -members_title=Члени списку -members_desc=Використовуйте поле нижче для редагування списку адрес, що одержують пошту, що йде на цей список розсилання. -members_rodesc=У текстовому полі нижче зазначені всі адреси, що одержують пошту, що йде на цей список розсилання. -members_sub=Додати адреса на список -members_add=Додати -members_unsub=Видалити адреса зі списку -members_rem=Видалити -members_sync=Синхронізувати список користувачів Unix зі списком розсилання? -members_dom=Ім'я домену для додавання до імен користувачів -members_eedit=Вам заборонено редагувати членів цього списку -members_esub=Ви повинні вказати пароль відповідального перед внесенням адрес у цей список -members_esubaddr=Адреса повинна мати повне доменне ім'я, наприклад foo@bar.com -members_eunsub=Ви повинні вказати пароль відповідального перед видаленням адреси зі списку -members_eunsubaddr=Адреса повинна мати повне доменне ім'я, наприклад foo@bar.com - -info_title=Повідомлення й описи -info_header=Повідомлення й описи -info_desc=Список описів, що підключаються до відповідей на команди списків -info_info=Інформаційне повідомлення, що повертається у відповідь на команду info $1 -info_intro=Вступне повідомлення, що відправляється знову підписаним на список -info_same=Як інформаційне повідомлення -info_below=Уведене нижче.. - -subs_title=Підписка на списки і модерування -subs_header=Підписка на списки і параметри модерування -subs_sub=Політики підписки -subs_sopen=Любою може підписати сам себе -subs_sauto=Любою може підписати хоч кого -subs_closed=Потрібно підтвердження відповідального -subs_unsub=Політики зняття відмовлення від списку -subs_uopen=Любою може зняти підписку із себе -subs_uauto=Любою може зняти підписку з будь-якого -subs_confirm=Вимагати підтвердження про підписку? -subs_welcome=Відправляти вступне повідомлення? -subs_strip=Додавати в список тільки явні адреси? -subs_announcements=Повідомляти відповідального за список про всі підписки і скасування підписки? -subs_administrivia=Переправляти запити на підписку/скасування підписки відповідальному за список? -subs_passwd=Пароль відповідального за список -subs_moderate=Список модерований? -subs_moderator=Адреса модератора? -subs_maint=Відповідальний -subs_mpasswd=Пароль модератора -subs_owner=Адреса email власника -subs_approval=Адреса email підтверджень -subs_eowner=Не зазначена адреса email власника -subs_eapproval=Не зазначена адреса email підтверджень -subs_emoderator= чиНе зазначений некоректна адреса модератора -subs_epasswd= чиНе зазначений некоректний пароль - -mesg_title=Параметри адреси email -mesg_header=Параметри вихідної пошти -mesg_reply=Відповідь: адреса пересланої пошти -mesg_none=Немає -mesg_sender=Відправник: адреса пошти -mesg_host=Ім'я вузла для пересланої пошти -mesg_subject=Тема: Привід для пересланої пошти -mesg_precedence=Пріоритет пошти, що пересилається -mesg_first=Перший клас -mesg_special=Особлива доставка -mesg_list=Список -mesg_bulk=Потрібне -mesg_junk=Сміття -mesg_purge=Видаляти заголовки Recieved: з пересланої пошти -mesg_maxlength=Максимально дозволений розмір повідомлення -mesg_ereply= чиНе зазначений некоректна адреса Reply-To: -mesg_esender= чиНе зазначений некоректна адреса Sender: -mesg_esender2=Sender: адреса не повинна містити в собі ім'я пішла -mesg_ehost= чиНе зазначене некоректне ім'я вузла -mesg_emaxlength= чиНе зазначений некоректний максимальний розмір повідомлення - -access_title=Керування доступом -access_header=Керування доступом до команд majordomo -access_open=Любою -access_list=Список членів -access_closed=Ніхто -access_get=Доступ до команди get -access_index=Доступ до команди index -access_info=Доступ до команди info -access_intro=Доступ до команди intro -access_which=Доступ до команди which -access_who=Доступ до команди who -access_adv=Уключити цей список у відповідь на команду lists для.. -access_adv0=Усіх -access_adv1=Адрес, що відповідають регулярному вираженню.. -access_adv2=Адрес, що не відповідають регулярному вираженню.. -access_res=Хто може писати повідомлення в список? -access_res0=Усі -access_res1=Члени списку -access_res2=Адреси у файлі -access_tbody=Регулярні вираження тіл заборонених повідомлень -access_theader=Регулярні вираження заголовків заборонених повідомлень -access_taboo=Зауваження: усі регулярні вираження заборон і адрес повинні починатися і закінчуватися на /, наприклад /foobar.com/ чи /obscene/. - -head_title=Заголовки і підписи -head_header=Заголовки і підписи пересланих повідомлень -head_fronter=Заголовок пересланого повідомлення -head_footer=Підпис пересланого повідомлення -head_headers=Додаткові заголовки SMTP для пересланих повідомлень - -misc_title=Різні параметри -misc_header=Різні параметри списку -misc_munge=Використовувати тільки домен для порівняння адрес? -misc_debug=Режим налагодження? -misc_info=Включити в інформаційне повідомлення дату останньої зміни? -misc_intro=Уключити у вступне повідомлення дату останньої зміни? - -digest_title=Параметри дайджесту -digest_header=Параметри створення дайджесту -digest_name=Заголовок дайджесту -digest_maxdays=Вік самого старого повідомлення перед відправленням -digest_days=днів -digest_lines=рядків -digest_maxlines=Максимальний розмір дайджесту перед відправленням -digest_volume=Номер поточного тому -digest_issue=Номер поточного випуску -digest_unlimited=Не обмежено -digest_edays= чиНе зазначене некоректне число днів -digest_elines= чиНе зазначене некоректне число рядків -digest_evolume= чиНе зазначений некоректний номер тому -digest_eissue= чиНе зазначений некоректний номер випуску - -log_global=Змінені загальні параметри -log_create_list=Створений список розсилання $1 -log_create_digest=Створений список дайджестів $1 -log_delete_list=Вилучений список розсилання $1 -log_delete_digest=Вилучений список дайджестів $1 -log_subscribe=Підписаний $2 на список $1 -log_unsubscribe=Відмовлено від підписки $2 зі списку $1 -log_members=Обновлені члени списку $1 -log_auto=Обновлена синхронізація для списку $1 -log_info=Обновлені повідомлення й описи для списку $1 -log_subs=Обновлені методи підписки і модерування для списку $1 -log_mesg=Обновлені параметри адреси email для списку $1 -log_access=Обновлене керування доступом для списку $1 -log_head=Обновлені заголовки і підписи для списку $1 -log_misc=Обновлені різні параметри для списку $1 -log_digest=Обновлені параметри дайджесту для списку $1 - -acl_lists=Списки розсилання, керовані цим користувачем -acl_lall=Усі списки -acl_lsel=Обрані.. -acl_global=Можна змінювати загальні параметри? -acl_create=Можна створювати нові списки розсилання? -acl_edit=Можна редагувати членство в списку? - -alias_err=Помилка при настроюванні псевдонімів -alias_eowner=Не зазначена адреса email власника +index_title=Менеджер списків розсилання Majordomo +index_econfig=Файл настроювань majordomo $1 не існує. Можливо некоректні настроювання модуля, або majordomo не встановлений. +index_eprograms=Каталог majordomo $1 не існує. Можливо некоректні настроювання модуля, або majordomo не встановлений. +index_eversion=Ваша версія majordomo не підтримується Webmin. Підтримуються тільки версії 1.94 і вище. +index_emdomdir=Перемінна $1 у вашому файлі настроювань majordomo встановлена в $2, чого не існує. +index_esendmail=Файл настроювань sendmail $1 не існує. Перевірте настроювання модуля Sendmail. +index_setupdesc=Majordomo установлений на вашій системі, але не набудований у файлі псевдонімів sendmail (aliases). +index_owner=Власник адреси email +index_setup=Настроювання псевдонімів +index_none=У вас немає визначених списків розсилання +index_add=Додати новий список розсилання +index_digest=Додати новий файл дайджест +index_global=Редагування настроювань Majordomo +index_globaldesc=Редагування загальних настроювань Majordomo, застосовуваних до всіх списків розсилання +index_return=списки розсилання +index_version=Majordomo версії $1 +global_title=Загальні параметри +global_ecannot=Вам заборонено редагувати загальні параметри +global_header=Загальні параметри Majordomo +global_whereami=Ім'я сервера пошти ($whereami) +global_whoami=Головна адреса Majordomo +global_owner=Адреса власника Majordomo +global_sendmail=Шлях до команди sendmail +global_err=Помилка при збереженні загальних параметрів +global_ewhereami= чиНе зазначене некоректне ім'я вузла поштового сервера +global_ewhoami= чиНе зазначений некоректна адреса Majordomo +global_eowner= чиНе зазначений некоректна адреса власника +global_esendmail=Команда sendmail '$1' не існує +create_ecannot=Вам заборонено створювати нові списки +create_title=Створення списку розсилання +create_header=Параметри нового списку +create_name=Назва списку +create_owner=Адреса відповідального за список +create_password=Пароль відповідального +create_desc=Опис +create_info=Вступне повідомлення +create_footer=Підпис повідомлення, що пересилається +create_moderate=Список модерований? +create_moderator=Адреса модератора +create_same=Як у відповідального +create_err=помилка при створенні списку розсилання +create_ename=Назва списку чи некоректно не зазначене +create_eexists=Список розсилання з назвою '$1' вже існує +create_ealias=Поштовий псевдонім для '$1' вже існує +create_eowner=Некоректний чи не зазначений адреса власника списку +create_epassword=Некоректний чи не зазначений пароль адміністратора +create_emoderator=Некоректний чи не зазначений адреса відповідального за список +create_archive=Архівувати список? +create_archiveyear=Щорічно +create_archivemonth=Щомісяця +create_archiveday=Щодня +cdigest_ecannot=Вам заборонено створювати новий дайджест +cdigest_title=Створення дайджесту +cdigest_header=Параметри дайджесту +cdigest_name=Назва списку +cdigest_list=Створити дайджест зі списку +cdigest_owner=Список адрес відповідальних +cdigest_password=Паролі відповідальних +cdigest_desc=Опис +cdigest_info=Вступне повідомлення +cdigest_footer=Підпис повідомлення дайджесту +cdigest_when=Відправляти дайджест, якщо +cdigest_old=Самому старому повідомленню $1 днів. +cdigest_lines=Усього в повідомленнях $1 рядків +cdigest_err=Помилка при створенні дайджесту +cdigest_edays= чиНекоректно не зазначена кількість днів +cdigest_elines= чиНекоректно не зазначена кількість рядків +edit_title=Редагувати список розсилання +edit_ecannot=Вам заборонено редагувати цей список розсилання +edit_delete=Видалення списку +edit_deletemsg=Видалити цей список, включаючи всі зв'язані файли й адреси +edit_return=список розсилання +edit_for=Для списку $1 +delete_ecannot=Вам заборонено видаляти цей список розсилання +delete_edigest=Цей список не може бути вилучений, тому що з ним зв'язані списки дайджестів +delete_title=Видалення списку +delete_rusure=Ви упевнені, що хочете видалити список розсилання $1? Будуть вилучені наступні файли : +delete_aliases=Також будуть вилучені наступні псевдоніми пошти : +delete_ok=Видалити список +members_title=Члени списку +members_desc=Використовуйте поле нижче для редагування списку адрес, що одержують пошту, що йде на цей список розсилання. +members_rodesc=У текстовому полі нижче зазначені всі адреси, що одержують пошту, що йде на цей список розсилання. +members_sub=Додати адреса на список +members_add=Додати +members_unsub=Видалити адреса зі списку +members_rem=Видалити +members_sync=Синхронізувати список користувачів Unix зі списком розсилання? +members_dom=Ім'я домену для додавання до імен користувачів +members_eedit=Вам заборонено редагувати членів цього списку +members_esub=Ви повинні вказати пароль відповідального перед внесенням адрес у цей список +members_esubaddr=Адреса повинна мати повне доменне ім'я, наприклад foo@bar.com +members_eunsub=Ви повинні вказати пароль відповідального перед видаленням адреси зі списку +members_eunsubaddr=Адреса повинна мати повне доменне ім'я, наприклад foo@bar.com +info_title=Повідомлення й описи +info_header=Повідомлення й описи +info_desc=Список описів, що підключаються до відповідей на команди списків +info_info=Інформаційне повідомлення, що повертається у відповідь на команду info $1 +info_intro=Вступне повідомлення, що відправляється знову підписаним на список +info_same=Як інформаційне повідомлення +info_below=Уведене нижче.. +subs_title=Підписка на списки і модерування +subs_header=Підписка на списки і параметри модерування +subs_sub=Політики підписки +subs_sopen=Любою може підписати сам себе +subs_sauto=Любою може підписати хоч кого +subs_closed=Потрібно підтвердження відповідального +subs_unsub=Політики зняття відмовлення від списку +subs_uopen=Любою може зняти підписку із себе +subs_uauto=Любою може зняти підписку з будь-якого +subs_confirm=Вимагати підтвердження про підписку? +subs_welcome=Відправляти вступне повідомлення? +subs_strip=Додавати в список тільки явні адреси? +subs_announcements=Повідомляти відповідального за список про всі підписки і скасування підписки? +subs_administrivia=Переправляти запити на підписку/скасування підписки відповідальному за список? +subs_passwd=Пароль відповідального за список +subs_moderate=Список модерований? +subs_moderator=Адреса модератора? +subs_maint=Відповідальний +subs_mpasswd=Пароль модератора +subs_owner=Адреса email власника +subs_approval=Адреса email підтверджень +subs_eowner=Не зазначена адреса email власника +subs_eapproval=Не зазначена адреса email підтверджень +subs_emoderator= чиНе зазначений некоректна адреса модератора +subs_epasswd= чиНе зазначений некоректний пароль +mesg_title=Параметри адреси email +mesg_header=Параметри вихідної пошти +mesg_reply=Відповідь: адреса пересланої пошти +mesg_none=Немає +mesg_sender=Відправник: адреса пошти +mesg_host=Ім'я вузла для пересланої пошти +mesg_subject=Тема: Привід для пересланої пошти +mesg_precedence=Пріоритет пошти, що пересилається +mesg_first=Перший клас +mesg_special=Особлива доставка +mesg_list=Список +mesg_bulk=Потрібне +mesg_junk=Сміття +mesg_purge=Видаляти заголовки Recieved: з пересланої пошти +mesg_maxlength=Максимально дозволений розмір повідомлення +mesg_ereply= чиНе зазначений некоректна адреса Reply-To: +mesg_esender= чиНе зазначений некоректна адреса Sender: +mesg_esender2=Sender: адреса не повинна містити в собі ім'я пішла +mesg_ehost= чиНе зазначене некоректне ім'я вузла +mesg_emaxlength= чиНе зазначений некоректний максимальний розмір повідомлення +access_title=Керування доступом +access_header=Керування доступом до команд majordomo +access_open=Любою +access_list=Список членів +access_closed=Ніхто +access_get=Доступ до команди get +access_index=Доступ до команди index +access_info=Доступ до команди info +access_intro=Доступ до команди intro +access_which=Доступ до команди which +access_who=Доступ до команди who +access_adv=Уключити цей список у відповідь на команду lists для.. +access_adv0=Усіх +access_adv1=Адрес, що відповідають регулярному вираженню.. +access_adv2=Адрес, що не відповідають регулярному вираженню.. +access_res=Хто може писати повідомлення в список? +access_res0=Усі +access_res1=Члени списку +access_res2=Адреси у файлі +access_tbody=Регулярні вираження тіл заборонених повідомлень +access_theader=Регулярні вираження заголовків заборонених повідомлень +access_taboo=Зауваження: усі регулярні вираження заборон і адрес повинні починатися і закінчуватися на /, наприклад /foobar.com/ чи /obscene/. +head_title=Заголовки і підписи +head_header=Заголовки і підписи пересланих повідомлень +head_fronter=Заголовок пересланого повідомлення +head_footer=Підпис пересланого повідомлення +head_headers=Додаткові заголовки SMTP для пересланих повідомлень +misc_title=Різні параметри +misc_header=Різні параметри списку +misc_munge=Використовувати тільки домен для порівняння адрес? +misc_debug=Режим налагодження? +misc_info=Включити в інформаційне повідомлення дату останньої зміни? +misc_intro=Уключити у вступне повідомлення дату останньої зміни? +digest_title=Параметри дайджесту +digest_header=Параметри створення дайджесту +digest_name=Заголовок дайджесту +digest_maxdays=Вік самого старого повідомлення перед відправленням +digest_days=днів +digest_lines=рядків +digest_maxlines=Максимальний розмір дайджесту перед відправленням +digest_volume=Номер поточного тому +digest_issue=Номер поточного випуску +digest_unlimited=Не обмежено +digest_edays= чиНе зазначене некоректне число днів +digest_elines= чиНе зазначене некоректне число рядків +digest_evolume= чиНе зазначений некоректний номер тому +digest_eissue= чиНе зазначений некоректний номер випуску +log_global=Змінені загальні параметри +log_create_list=Створений список розсилання $1 +log_create_digest=Створений список дайджестів $1 +log_delete_list=Вилучений список розсилання $1 +log_delete_digest=Вилучений список дайджестів $1 +log_subscribe=Підписаний $2 на список $1 +log_unsubscribe=Відмовлено від підписки $2 зі списку $1 +log_members=Обновлені члени списку $1 +log_auto=Обновлена синхронізація для списку $1 +log_info=Обновлені повідомлення й описи для списку $1 +log_subs=Обновлені методи підписки і модерування для списку $1 +log_mesg=Обновлені параметри адреси email для списку $1 +log_access=Обновлене керування доступом для списку $1 +log_head=Обновлені заголовки і підписи для списку $1 +log_misc=Обновлені різні параметри для списку $1 +log_digest=Обновлені параметри дайджесту для списку $1 +acl_lists=Списки розсилання, керовані цим користувачем +acl_lall=Усі списки +acl_lsel=Обрані.. +acl_global=Можна змінювати загальні параметри? +acl_create=Можна створювати нові списки розсилання? +acl_edit=Можна редагувати членство в списку? +alias_err=Помилка при настроюванні псевдонімів +alias_eowner=Не зазначена адреса email власника diff --git a/majordomo/lang/uk.auto b/majordomo/lang/uk.auto index 5178a63fa..21a74425f 100644 --- a/majordomo/lang/uk.auto +++ b/majordomo/lang/uk.auto @@ -7,11 +7,8 @@ index_info=Перелічити інформацію index_mail=Адреса пошти index_moderated=Модерується index_count=# користувачів - global_saved=(збережено) - create_minimum=Мінімально необхідна інформація - check_title=Перевірте налаштування Майордомо check_test=Тест на. .. check_result=Результат / додаткова перевірка diff --git a/majordomo/lang/ur.auto b/majordomo/lang/ur.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/ur.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/vi.auto b/majordomo/lang/vi.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/vi.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/majordomo/lang/zh b/majordomo/lang/zh index 97a5c6660..8b5eb5de8 100644 --- a/majordomo/lang/zh +++ b/majordomo/lang/zh @@ -13,7 +13,6 @@ index_digest=增加一新的文摘列表 index_global=编辑 Majordomo 选项 index_globaldesc=编辑适用于全部邮件列表的 Majordomo 选项 index_return=邮件列表 - global_title=全局选项 global_ecannot=您无权编辑全局选项 global_header=全局 Majordomo 选项 @@ -26,7 +25,6 @@ global_ewhereami=丢失或无效的邮件服务器主机名 global_ewhoami=丢失或无效的 Majordomo 地址 global_eowner=丢失或无效的所有者地址 global_esendmail=Sendmail 命令 '$1' 不存在 - create_ecannot=您无权创建新列表 create_title=创建邮件列表 create_header=新列表概述 @@ -46,7 +44,6 @@ create_ealias='$1' 的邮件别名已经存在 create_eowner=丢失或无效的所有者的邮件地址 create_epassword=丢失或无效的管理口令 create_emoderator=丢失或无效的仲裁者邮件地址 - cdigest_ecannot=您无权创建新的文摘列表 cdigest_title=创建文摘列表 cdigest_header=新文摘列表详述 @@ -63,21 +60,18 @@ cdigest_lines=消息共 $1 行 cdigest_err=创建文摘列表失败 cdigest_edays=丢失或无效的的天数 cdigest_elines=丢失或无效的行数 - edit_title=编辑邮件列表 edit_ecannot=您无权编辑邮件列表 edit_delete=删除列表 edit_deletemsg=删除这个列表,及其所包含的所有附件和邮件别名 edit_return=邮件列表 edit_for=为列表 $1 - delete_ecannot=您无权删除该邮件列表 delete_edigest=该列表不能删除,是因为它可能有相关的文摘列表 delete_title=删除列表 delete_rusure=您确信要删除邮件列表 $1? 下面文件将被删除： delete_aliases=下列邮件别名也将被删除： delete_ok=删除列表 - members_title=列出成员 members_desc=利用下表编辑邮件地址列表,这些地址将能收到发送到该列表中的邮件。 members_rodesc=下表列出了所有能收到发送给该列表的邮件的邮件地址。 @@ -92,7 +86,6 @@ members_esub=在预订地址至列表中之前，您必须维护口令 members_esubaddr=要预订的地址必须域名齐全,例如:foo@bar.com members_eunsub=在列表中退订地址之前,您必须选择维护口令 members_eunsubaddr=要退订的地址必须域名齐全,例如:foo@bar.com - info_title=消息和描述 info_header=消息和描述 info_desc=列出要包含在lists命令的回应中的描述 @@ -100,7 +93,6 @@ info_info=回应info $1命令而返回的信息性消息 info_intro=有人预订列表时发出的简要消息 info_same=与信息性消息相同 info_below=按照下面输入.. - subs_title=预订和仲裁 subs_header=预订和仲裁选项 subs_sub=预订规定 @@ -126,7 +118,6 @@ subs_eowner=丢失所有者的邮件地址 subs_eapproval=丢失批准邮件地址 subs_emoderator=丢失或无效的仲裁者地址 subs_epasswd=丢失或无效的口令 - mesg_title=Email 选项 mesg_header=外发邮件选项 mesg_reply=回复到:地址在重发的邮件中 @@ -147,7 +138,6 @@ mesg_esender=丢失或无效的发送者地址 mesg_esender2=发送者: 地址不得包括主机名 mesg_ehost=丢失或无效的主机名 mesg_emaxlength=丢失或无效的最大邮件的大小 - access_title=访问控制 access_header=majordomo 命令的访问控制 access_open=任何人 @@ -170,20 +160,17 @@ access_res2=文件中的地址 access_tbody=Taboo正文正则表达式 access_theader=Taboo页首正则表达式 access_taboo=注意:所有Taboo的和地址正则表达式均必须以/开头和结束,例如:/foobar.com/ 或 /obscene/。 - head_title=页首和注脚 head_header=重发邮件的页首和注脚 head_fronter=重发邮件的页首 head_footer=重发邮件的注脚 head_headers=重发邮件的 SMTP 额外页首 - misc_title=杂类选项 misc_header=杂类列表选项 misc_munge=只有在比较地址时使用域名? misc_debug=调试模式？ misc_info=在信息性消息中包括最后的更新日期？ misc_intro=在简介消息中包括最后的更新日期？ - digest_title=文摘选项 digest_header=产生文摘的选项 digest_name=文摘标题 @@ -198,7 +185,6 @@ digest_edays=丢失或无效的天数 digest_elines=丢失或无效的行数 digest_evolume=丢失或无效的卷号 digest_eissue=丢失或无效的期号 - log_global=已改变全局选项 log_create_list=创建了邮件列表 $1 log_create_digest=创建了文摘列表 $1 @@ -215,7 +201,6 @@ log_access=更新了列表 $1 的访问控制 log_head=更新了列表 $1 的页首和页脚 log_misc=更新了列表 $1 的杂类 log_digest=更新了列表 $1 的文摘选项 - acl_lists=这个用户能管理的邮件 acl_lall=所有列表 acl_lsel=已选择.. diff --git a/majordomo/lang/zh.auto b/majordomo/lang/zh.auto index 3f75ed4b2..10dfe0bb6 100644 --- a/majordomo/lang/zh.auto +++ b/majordomo/lang/zh.auto @@ -8,18 +8,14 @@ index_info=清单信息 index_mail=邮件地址 index_moderated=适度 index_count=用户数 - global_saved=（已保存） - create_archive=存档邮件列表？ create_archiveyear=在年度档案中 create_archivemonth=在月度档案中 create_archiveday=在每日档案中 create_minimum=最低要求信息 - alias_err=无法设置别名 alias_eowner=缺少所有者的电子邮件地址 - check_title=检查Majordomo配置 check_test=测试. .. check_result=结果/附加检查 diff --git a/majordomo/lang/zh_TW.auto b/majordomo/lang/zh_TW.auto deleted file mode 100644 index abdd51515..000000000 --- a/majordomo/lang/zh_TW.auto +++ /dev/null @@ -1,253 +0,0 @@ -index_title=Majordomo List Manager -index_econfig=The majordomo config file $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eprograms=The majordomo directory $1 does not exist. Maybe your module configuration is incorrect, or majordomo is not installed. -index_eversion=Your majordomo version is not supported by Webmin. Only versions 1.94 and above are supported. -index_eversion2=The Majordomo version file $1 was not found under the programs directory $2. Maybe your module configuration is incorrect, or majordomo is not installed. -index_emdomdir=The $1 variable in your majordomo config file is set to $2, which does not exist. -index_esendmail=The $1 seting of your modul configuration is set to $2, which does not exist. Maybe your module configuration is incorrect, or no mailer daemon is installed. -index_esendmail2=Sendmail is either not installed or not properly set up on your system. Check the Sendmail module configuration. -index_epostfix=Postfix is either not installed or not properly set up on your system. Check the Postfix module configuration. -index_esendmail3=The Sendmail Webmin module needed to manage aliases is not installed. -index_setupdesc=Majordomo has been installed on your system, but not setup properly in the sendmail aliases file. -index_owner=Owner email address -index_setup=Setup Aliases -index_none=You have no mailing lists defined -index_add=Add a new mailing list. -index_digest=Add a new digest list. -index_global=Edit Majordomo Options -index_globaldesc=Edit global Majordomo options that apply to all mailing lists -index_return=mailing lists -index_version=Majordomo version $1 -index_name=List name -index_info=List info -index_mail=Mail adress -index_moderated=Moderated -index_count=# of users - -global_title=Global Options -global_ecannot=You are not allowed to edit global options -global_header=Global Majordomo options -global_whereami=Mail server hostname ($whereami) -global_whoami=Majordomo master address -global_owner=Majordomo owner's address -global_sendmail=Sendmail command path -global_err=Failed to save global options -global_ewhereami=Missing or invalid mail server hostname -global_ewhoami=Missing or invalid Majordomo address -global_eowner=Missing or invalid owner's address -global_esendmail=Sendmail command '$1' does not exist -global_saved=(saved) - -create_ecannot=You are not allowed to create new lists -create_title=Create Mailing List -create_header=New list details -create_name=List name -create_owner=List maintainer's address -create_password=Maintenance password -create_desc=Description -create_info=Introductory message -create_footer=Forwarded mail footer -create_moderate=Moderated list? -create_moderator=Moderator's address -create_same=Same as maintainer -create_err=Failed to create mailing list -create_ename=Invalid or missing list name -create_eexists=A mailing list called '$1' already exists -create_ealias=A mail alias for '$1' already exists -create_eowner=Invalid or missing owner's email address -create_epassword=Invalid or missing administration password -create_emoderator=Invalid or missing moderator's email address -create_archive=Archive mailing list? -create_archiveyear=In yearly file -create_archivemonth=In monthly file -create_archiveday=In daily file -create_minimum=Minimum required information - -cdigest_ecannot=You are not allowed to create new digest lists -cdigest_title=Create Digest List -cdigest_header=New digest list details -cdigest_name=List name -cdigest_list=Make disgest of list -cdigest_owner=List maintainer's address -cdigest_password=Maintenance password -cdigest_desc=Description -cdigest_info=Introductory message -cdigest_footer=Digest mail footer -cdigest_when=Send digest when -cdigest_old=Oldest message is $1 days old -cdigest_lines=Messages total $1 lines -cdigest_err=Failed to create digest list -cdigest_edays=Invalid or missing number of days -cdigest_elines=Invalid or missing number of lines - -edit_title=Edit Mailing List -edit_ecannot=You are not allowed to edit this mailing list -edit_delete=Delete List -edit_deletemsg=Delete this list, including all associated files and mail aliases -edit_return=mailing list -edit_for=For list $1 - -delete_ecannot=You are not allowed to delete this mailing list -delete_edigest=This list cannot be deleted as it appears to have an associated digest list -delete_title=Delete List -delete_rusure=Are you sure you want to delete the mailing list $1? The following files will be deleted : -delete_aliases=The following mail aliases will also be deleted : -delete_ok=Delete List - -members_title=List Members -members_desc=Use the text box below to edit the list of email addresses that will receive mail sent to this list. -members_rodesc=The text box below lists all email addresses that will receive mail sent to this list. -members_sub=Subscribe address to list -members_add=Add -members_unsub=Remove address from list -members_rem=Remove -members_sync=Synchronise Unix users with list? -members_dom=Domain name to append to usernames -members_eedit=You are not allowed to edit the members of this list -members_esub=You must choose a maintenance password before subscribing addresses to this list -members_esubaddr=The address to subscribe must have a full domain name, like foo@bar.com -members_eunsub=You must choose a maintenance password before unsubscribing addresses from this list -members_eunsubaddr=The address to unsubscribe must have a full domain name, like foo@bar.com - -info_title=Messages and Description -info_header=Messages and description -info_desc=List description, to be included in the responsed to the lists command -info_info=Informative message, to be returned in response to the command info $1 -info_intro=Introductory message, to be sent when someone subscribes to the list -info_same=Same as informative message -info_below=As entered below.. - -subs_title=Subscription and Moderation -subs_header=Subscription and moderation options -subs_sub=Subscribe policy -subs_sopen=Anyone can subscribe themself -subs_sauto=Anyone can subscribe anyone -subs_closed=Maintainer approval required -subs_unsub=Unsubscribe policy -subs_uopen=Anyone can unsubscribe themself -subs_uauto=Anyone can unsubscribe anyone -subs_confirm=Require subscribe confirmation? -subs_welcome=Send introductory message? -subs_strip=Add only raw address to list? -subs_announcements=Notify maintainer of subscribes and unsubscribes? -subs_administrivia=Forward subscribe/unsubscribe requests to maintainer? -subs_passwd=Maintenance password -subs_moderate=Moderated list? -subs_moderator=Moderator's address? -subs_maint=Maintainer -subs_mpasswd=Moderation password -subs_owner=Owner's email address -subs_approval=Approval email address -subs_eowner=Missing owner's email address -subs_eapproval=Missing approval email address -subs_emoderator=Missing or invalid moderator address -subs_epasswd=Missing or invalid password - -mesg_title=Email Options -mesg_header=Outgoing email options -mesg_reply=Reply-To: address in resent email -mesg_none=None -mesg_sender=Sender: address in email -mesg_host=Hostname for resent email -mesg_subject=Subject: prefix for resent email -mesg_precedence=Resent email priority -mesg_first=First class -mesg_special=Special delivery -mesg_list=List -mesg_bulk=Bulk -mesg_junk=Junk -mesg_purge=Remove Received: headers from resent email -mesg_maxlength=Maximum allowable message size -mesg_ereply=Missing or invalid Reply-To: address -mesg_esender=Missing or invalid Sender: address -mesg_esender2=Sender: address must not include a hostname -mesg_ehost=Missing or invalid hostname -mesg_emaxlength=Missing or invalid maximum message size - -access_title=Access Control -access_header=Access control for majordomo commands -access_open=Anyone -access_list=List members -access_closed=Nobody -access_get=Access to get command -access_index=Access to index command -access_info=Access to info command -access_intro=Access to intro command -access_which=Access to which command -access_who=Access to who command -access_adv=Include this list in response to lists command for.. -access_adv0=Everyone -access_adv1=Addresses matching regexps.. -access_adv2=Addresses not matching regexps.. -access_res=Who can post to the list? -access_res0=Anyone -access_res1=List members -access_res2=Addresses in file -access_tbody=Taboo body regexps -access_theader=Taboo header regexps -access_taboo=All taboo and address regexps must begin and end with / , like /foobar.com/ or /obscene/
For purpose of SPAM rejection enter e.g. /^X-Spam-Flag: YES/i or /^X-Spam-Level: \*\*\*\*\*/i as taboo header regex. - -head_title=Headers and Footers -head_header=Resent email headers and footers -head_fronter=Resent email header -head_footer=Resent email footer -head_headers=Extra SMTP headers for resent email - -misc_title=Miscellaneous Options -misc_header=Miscellaneous list options -misc_munge=Use domain only when comparing addresses? -misc_debug=Debug mode? -misc_info=Include last modified date in informative message? -misc_intro=Include last modified date in introductory message? - -digest_title=Digest Options -digest_header=Digest generation options -digest_name=Digest title -digest_maxdays=Oldest message age before sending -digest_days=days -digest_lines=lines -digest_maxlines=Max digest size before sending -digest_volume=Current volume number -digest_issue=Current issue number -digest_unlimited=Unlimited -digest_edays=Missing or invalid number of days -digest_elines=Missing or invalid number of lines -digest_evolume=Missing or invalid volume number -digest_eissue=Missing or invalid issue number - -log_global=Changed global options -log_create_list=Created mailing list $1 -log_create_digest=Created digest list $1 -log_delete_list=Deleted mailing list $1 -log_delete_digest=Deleted digest list $1 -log_subscribe=Subscribed $2 to list $1 -log_unsubscribe=Unsubscribed $2 from list $1 -log_members=Updated members of list $1 -log_auto=Updated synchronisation for list $1 -log_info=Updated messages and description for list $1 -log_subs=Updated subscription and moderation for list $1 -log_mesg=Updated email options for list $1 -log_access=Updated access control for list $1 -log_head=Updated headers and footers for list $1 -log_misc=Updated miscellaneous Options for list $1 -log_digest=Updated digest options for list $1 - -acl_lists=Mailing lists this user can manage -acl_lall=All lists -acl_lsel=Selected.. -acl_global=Can edit global options? -acl_create=Can create new mailing lists? -acl_edit=Can edit list membership? - -alias_err=Failed to setup aliases -alias_eowner=Missing owner email address - -check_title=Check Majordomo Config -check_test=Test for ... -check_result=Result / additional check -check_status=Status -check_perm=Permissions -check_exec=world executable! -check_write=world writeable! -check_read=world readable! -check_possible=Possible problem diff --git a/man/lang/de b/man/lang/de index 1caa68f6b..2df6a4e36 100644 --- a/man/lang/de +++ b/man/lang/de @@ -76,4 +76,4 @@ perl_emod=Ungültiger Perl-Modulname acl_allow=Darf die erlaubten Suchtypen bearbeiten? -check_ecannot=Sie sind nicht berechtigt, die erlaubten Suchtypen zu bearbeiten +check_ecannot=Sie sind nicht berechtigt, die erlaubten Suchtypen zu bearbeiten \ No newline at end of file diff --git a/minecraft/lang/af.auto b/minecraft/lang/af.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/af.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/ar.auto b/minecraft/lang/ar.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/ar.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/be.auto b/minecraft/lang/be.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/be.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/bg.auto b/minecraft/lang/bg.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/bg.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/ca.auto b/minecraft/lang/ca.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/ca.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/cs.auto b/minecraft/lang/cs.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/cs.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/da.auto b/minecraft/lang/da.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/da.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/de b/minecraft/lang/de index bbe43c533..507831071 100644 --- a/minecraft/lang/de +++ b/minecraft/lang/de @@ -20,11 +20,9 @@ index_download=Download Server index_downloaddesc=Klicken Sie diese Schaltfläche um die neuesten Version der Minecraft Server JAR-Datei herunterladen und zu installieren. index_upgradedesc=Eine neue Minecraft-Server-Version steht ab sofort zum Download bereit. index_upgrade=Upgrade jetzt - check_edir=Das Basis-Verzeichnis $1 existiert nicht check_ejar=Die Server JAR Datei $1 existiert nicht check_ejava=Das ausführbare Java $1 wurde nicht gefunden - conf_title=Server Konfiguration conf_desc=Diese Einstellungen werden nicht aktiviert, bis der Minecraft Server neu gestartet wird. conf_header=Globale Serverkonfigurationsseite @@ -68,7 +66,6 @@ conf_eprotect=Spawn Schutz Radius muss eine Zahl sein conf_eip=Fehlende oder ungültige IP-Adresse conf_eport=Fehlende oder nicht-numerische Portnummer conf_args=Java Befehlszeilen flags - users_title=Benutzer und Operatoren users_tabwhite=Erlaubte Benutzer users_tabop=Operatoren @@ -78,7 +75,6 @@ users_whitedesc=Wenn aktiviert, werden nur hier aufgeführte Benutzer erlaubt se users_opdesc=Nur Benutzer, die hier aufgeführt sind, wird erlaubt die Verwaltungsbefehle auf diesem Minecraft Server auszuführen. users_ipdesc=Die hier aufgeführen IP-Adressen wird es nicht erlaubt sich auf diesen Minecraft Server zu verbinden. users_enabled=Whitelist Durchsetzung aktiviert? - conns_title=Verbundene Spieler conns_desc=Folgende Spieler sind derzeit mit Ihrem Server verbunden. Klicken Sie auf einen Spielernamen, um Aktionen ausführen. conns_edown=Verbundene Spieler können nicht verwaltet werden, wenn der Server läuft @@ -87,19 +83,16 @@ conns_disc=Gestrennte ausgewählt conns_enter=Verwalte Spieler: conns_ok=OK conns_return=Spieler Liste - logs_title=Suche Log Datei logs_lines=Zeige letzte logs_matching=Zeile zutreffend logs_ok=Suche - console_title=Server Konsole console_run=Gib Befehl ein console_ok=OK console_old=oder wähle Vorheriges console_edit=Bearbeite Vorherige console_edown=Die Minecraft Server Konsole kann nicht verwendet werden, wenn der Server läuft - conn_title=Verwalte Spieler conn_header=Spieler Details und Aktionen conn_name=Spieler Name @@ -172,7 +165,6 @@ conn_stats=Spieler Statistiken conn_stat=Statistik conn_statv=Wert conn_nostats=Keine Statistiken wurden bisher aufgezeichnet - worlds_title=Verwalte Welten worlds_def=Aktiv? worlds_name=Welt Name @@ -186,7 +178,6 @@ worlds_none=Keine Welten wurden bisher erstellt! worlds_return=Liste an Welten worlds_err=Fehlgeschlagen Welt zu ändern worlds_esel=Keine Welt ausgewählt! - world_edit=Editiere Welt world_create=Erstelle Welt world_header=Minecraft Welt Details @@ -214,7 +205,6 @@ world_ezip=Hochgeladene Welt Daten scheint kein ZIP-Format zu sein world_eunzip=Fehlgeschlagen Welt Daten zu entpacken : $1 world_edat=ZIP-Datei enthält keine level.dat Datei world_download=Download ZIP-Datei - chooser_title=Wähle item chooser_id=Item ID chooser_num=Item Nummer @@ -222,7 +212,6 @@ chooser_name=Item Name chooser_none=Keine items passt zu Ihrer Suche chooser_search=Zeige item Treffer chooser_ok=Suchen - cmds_title=Welt Befehle cmds_header=Welt-Level Operatoren cmds_gamemode=Ändere Standard Spiel-Modus @@ -262,12 +251,10 @@ cmds_difficultydone=Schwierigkeitsstufe geändert cmds_say=Broadcast Nachricht cmds_sayb=Senden cmds_msgdone=Sende Nachricht an alle Spieler - manual_title=Editiere Konfigurationsdatei manual_desc=Diese Seite erlaubt manuell die Minecraft Server Konfigurationsdatei $1 zu bearbeiten. Seien Sie vorsichtig, da keine Validierung auf Ihre Eingabe gemacht wird. Alle Änderungen werden erst aktiviert, wenn der Server neu gestartet wird. manual_err=Fehlgeschlagen Konfigurationsdatei zu speichern manual_econf=Nichts eingegeben! - download_title=Download Minecraft Server download_already=Ihr System läuft bereits mit der neuesten Version des Minecraft Server. download_done=Ihr System wurde auf die neueste Version des Minecraft Server upgegradet. @@ -280,7 +267,6 @@ download_err=Konnte Minecraft Server einrichten download_edir=Fehlendes oder nicht absolutes Installationsverzeichnis download_euser=Benutzer zum ausführen existiert nicht download_eurl=Fehlgeschlagen Server Download URL zu erhalten - backup_title=Geplantes Backup backup_header=Optionen für geplante Welt-Backups backup_sched=Backup planen @@ -297,7 +283,6 @@ backup_email=E-Mail Backup-Bericht an backup_noemail=Keine backup_email_err=Nur E-Mail senden im Fehlerfall backup_emailto=Adresse - log_conf=Server Konfiguration geändert log_stop=Minecraft Server gestoppt log_start=Minecraft Server gestartet @@ -311,7 +296,6 @@ log_delboot=Deaktiviere Server beim Booten log_enable_backup=Geplante Backups auf $1 aktiviert log_disable_backup=Geplante Backups deaktiviert log_playtime=Spielzeit Limits geändert - monitor_up=Minecraft Server lebt monitor_latest=Minecraft Server ist aktuell monitor_down=Server-Prozess ist unten @@ -320,7 +304,6 @@ monitor_notype=Unbekannter Monitortyp! monitor_newversion=Neue Version ist verfügbar monitor_nojar=JAR Datei $1 existiert nicht monitor_checklog=Prüfe Server-Antwort auf Befehle? - playtime_title=Tägliche Spielzeit playtime_user=Benutzername playtime_time=Zeit online diff --git a/minecraft/lang/de.auto b/minecraft/lang/de.auto deleted file mode 100644 index 5d46e6a7d..000000000 --- a/minecraft/lang/de.auto +++ /dev/null @@ -1,47 +0,0 @@ -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/el.auto b/minecraft/lang/el.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/el.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/es.auto b/minecraft/lang/es.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/es.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/eu.auto b/minecraft/lang/eu.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/eu.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/fa.auto b/minecraft/lang/fa.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/fa.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/fi.auto b/minecraft/lang/fi.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/fi.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/fr b/minecraft/lang/fr index d67c6c19a..361e7a5ca 100644 --- a/minecraft/lang/fr +++ b/minecraft/lang/fr @@ -20,11 +20,9 @@ index_download=Télécharger le fichier serveur index_downloaddesc=Cliquez sur ce bouton pour télécharger la dernière version du serveur Minecraft. index_upgradedesc=Une nouvelle version de mise à jour est disponible dès maintenant. index_upgrade=Mettre à jour maintenant - check_edir=Le chemin du dossier de base $1 n'existe pas check_ejar=Le fichier serveur JAR file $1 n'existe pas check_ejava=L'éxécutable JAVA $1 n'a pas été trouvé - conf_title=Configuration du serveur conf_desc=Ces paramètres ne seront pris en compte qu'une seul fois après avoir redémarré le serveur. conf_header=Configuration globale du serveur @@ -64,7 +62,6 @@ conf_eprotect=Le cercle de sécuritée des apparitions doit être un nombre conf_eip=Adresse IP manquante ou invalide conf_eport=Port manquant ou valeur numérique conf_args=Commande java - users_title=Utilisateurs et opérateurs users_tabwhite=Utilisateurs autorisés users_tabop=Opérateurs @@ -74,7 +71,6 @@ users_whitedesc=Si activé, seul les utilisateurs listés seront autorisés a se users_opdesc=Seul les utilisateurs listés seront autorisés à lancer des commandes Adminsitrateurs. users_ipdesc=Ces adresses IP ne seront pas autorisés à se connecter. users_enabled=N'autoriser que les utilisateurs dans la liste blanche - conns_title=Joueurs connectés conns_desc=Les joueurs actuels sont connectés à votre serveur. Cliquez sur son nom pour afiner ses droits. conns_edown=Les joueurs ne peuvent être gérés que lorsque le serveur tourne @@ -83,19 +79,16 @@ conns_disc=Séléction des déconnectés conns_enter=Gérer le joueur nommé: conns_ok=OK conns_return=Liste des joueurs - logs_title=Afficher le log logs_lines=Afficher les dernières lignes logs_matching=Lignes manquantes logs_ok=Rechercher - console_title=Serveur (mode console) console_run=Insérer une commande console_ok=OK console_old=or Séléctionner le précedent console_edit=Éditer le précédent console_edown=Le mode console du serveur Minecraft ne peut être utilisé que lorsque le serveur tourne - conn_title=Gérer le joueur conn_header=Détails du joueur et activitée récente conn_name=Nom du joueur @@ -168,7 +161,6 @@ conn_stats=Statistique du joueur conn_stat=Statistique conn_statv=Valeur conn_nostats=Aucune statistique n'a encore été enregistrée - worlds_title=Gérér les mondes worlds_def=Activer worlds_name=Nom du monde @@ -182,7 +174,6 @@ worlds_none=Aucun monde n'a déja été crée! worlds_return=Liste des mondes worlds_err=Erreur lors de la création d'un nouveau monde worlds_esel=Pas de monde séléctionné ! - world_edit=Éditer un monde world_create=Créer un monde world_header=Détails d'un monde Minecraft @@ -207,14 +198,12 @@ world_ezip=Ne monde uploadé ne semble pas être dans un format ZIP world_eunzip=Erreur au dézippage du monde : $1 world_edat=Ce ZIP ne contient pas de fichier level.dat world_download=Téléchharger ce monde (ZIP) - chooser_title=Séléctionner objet chooser_id=ID de l'objet chooser_name=Nom de l'objet chooser_none=Aucun objet ne coorespond à votre recherche ! chooser_search=Afficher les objets coorespondant chooser_ok=Rechercher - cmds_title=Commande dans monde cmds_header=Opérations dans monde cmds_gamemode=Changer le mode de jeu @@ -254,12 +243,10 @@ cmds_difficultydone=Difficulté du jeu changée cmds_say=Message général cmds_sayb=Envoyé cmds_msgdone=Envoyer à tout les joueurs - manual_title=Éditer le fichier de configuration manual_desc=Cette page vous permet d'editer manuellement le fichier de configuration Minecraft $1. Attention, aucune validation ne sera effectuée sur votre entrée. Toute modification ne sera pas activée tant que le serveur n’aura pas redémarré. manual_err=Erreur lors de la tentative d'enregistrement du fichier manual_econf=Rien n'a été ajouté/modifié! - download_title=Télécharger le serveur Minecraft download_already=Votre système éxécute déja la dernière version de Minecraft. download_done=Votre système à mis à jour votre serveur Minecraft à sa dernière version. @@ -272,7 +259,6 @@ download_err=Erreur lors de la configuration du serveur Minecraft download_edir=Dossier manquant ou invalide download_euser=L'utilisateur UNIX défini est introuvable ou inexistant download_eurl=Impossible de télécharger le serveur depuis une URL - backup_title=Backup programmée backup_header=Options pour les backups programmées backup_sched=Backup programmée @@ -289,7 +275,6 @@ backup_email=Signaler les backup à backup_noemail=Personne backup_email_err=Seulement lors des échecs de backups backup_emailto=Adresse - log_conf=Changer la configuration du serveur log_stop=Éteindre le serveur Minecraft log_start=Démarrer le serveur Minecraft @@ -303,7 +288,6 @@ log_delboot=Désactiver le serveur au démarrage log_enable_backup=Activer les mises à jour programmés le $1 log_disable_backup=Désactiver les backups programmées log_playtime=Changer le temps de jeu - monitor_up=Minecraft Server Alive monitor_latest=Serveur Minecraft à jour monitor_down=Le processus du serveur n'est pas actif @@ -312,7 +296,6 @@ monitor_notype=Type de moniteur inconnu! monitor_newversion=Une nouvelle version est disponible monitor_nojar=le fichier JAR $1 n'existe pas monitor_checklog=Check server response to commands? - playtime_title=Heures quotidiennes de jeu playtime_user=Nom du joueur playtime_time=Durée du jeu diff --git a/minecraft/lang/fr.auto b/minecraft/lang/fr.auto deleted file mode 100644 index be96781f1..000000000 --- a/minecraft/lang/fr.auto +++ /dev/null @@ -1,59 +0,0 @@ -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -conf_type_amplified=Amplified -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number - -world_src3=Use ZIP file on server -world_efile=No world data filename entered -world_efile2=World data file does not exist - -chooser_num=Item Num - -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/he.auto b/minecraft/lang/he.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/he.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/hr.auto b/minecraft/lang/hr.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/hr.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/hu.auto b/minecraft/lang/hu.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/hu.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/it.auto b/minecraft/lang/it.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/it.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/ja.auto b/minecraft/lang/ja.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/ja.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/ko.auto b/minecraft/lang/ko.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/ko.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/lt.auto b/minecraft/lang/lt.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/lt.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/lv.auto b/minecraft/lang/lv.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/lv.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/ms.auto b/minecraft/lang/ms.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/ms.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/mt.auto b/minecraft/lang/mt.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/mt.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/nl.auto b/minecraft/lang/nl.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/nl.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/no.auto b/minecraft/lang/no.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/no.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/pl.auto b/minecraft/lang/pl.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/pl.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/pt.auto b/minecraft/lang/pt.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/pt.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/pt_BR.auto b/minecraft/lang/pt_BR.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/pt_BR.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/ro.auto b/minecraft/lang/ro.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/ro.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/ru.auto b/minecraft/lang/ru.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/ru.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/sk.auto b/minecraft/lang/sk.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/sk.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/sl.auto b/minecraft/lang/sl.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/sl.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/sv.auto b/minecraft/lang/sv.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/sv.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/th.auto b/minecraft/lang/th.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/th.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/tr.auto b/minecraft/lang/tr.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/tr.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/uk.auto b/minecraft/lang/uk.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/uk.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/ur.auto b/minecraft/lang/ur.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/ur.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/vi.auto b/minecraft/lang/vi.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/vi.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/zh.auto b/minecraft/lang/zh.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/zh.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/minecraft/lang/zh_TW.auto b/minecraft/lang/zh_TW.auto deleted file mode 100644 index a7ee61b5a..000000000 --- a/minecraft/lang/zh_TW.auto +++ /dev/null @@ -1,393 +0,0 @@ -index_title=Minecraft Server -index_cerr=An error was detected with your Minecraft server : $1. You may need to adjust the module configuration. Automatic installation is not possible as the server appears to be already running. -index_cerr2=The Minecraft server does not appear to be installed on your system. If it is already running, you will need to adjust the module configuration to use the correct paths. -index_rooterr=The Minecraft root directory is set on the module configuration page to $2, but this is the same as the Webmin module directory! -index_nojava=Also, the Java command $1 needed to run Minecraft was not found. -index_offer=Alternatively, Webmin can automatically download and install the Minecraft server for you. -index_dir=Install into directory -index_user=Run as Unix user -index_install=Download and Install -index_stop=Stop Minecraft Server -index_stopdesc=Click this button to stop the running Minecraft server. All clients will be immediately disconnected. -index_stopany=Stop Other Minecraft Server -index_stopanydesc=Click this button to stop the running Minecraft server using version $1. All clients will be immediately disconnected. -index_start=Start Minecraft Server -index_startdesc=Click this button to start the Minecraft server, so that clients can connect. -index_restart=Restart Minecraft Server -index_restartdesc=Click this button to apply the current configuration by restarting the Minecraft server. -index_atboot=Start at boot? -index_atbootdesc=Change this option to control whether the Minecraft server is started at boot time or not. If it is not currently started at boot and Yes is chosen, a new init script will be created. -index_return=module index -index_download=Download Server -index_downloaddesc=Click this button to download and install the latest version of the Minecraft server JAR file. -index_upgradedesc=A new Minecraft server version is now available for download. -index_upgrade=Upgrade Now -index_startwarn=WARNING! A different version of Minecraft may be configured to start at boot time. -index_portwarn=WARNING! Other process with PID $1 is using using the Minecraft server port. This may be another version of the Minecraft server. - -check_edir=The base directory $1 does not exist -check_ejar=The server JAR file $1 does not exist -check_ejava=The Java executable $1 was not found - -conf_title=Server Configuration -conf_desc=These settings will not be activated until the Minecraft server is restarted. -conf_header=Global server configuration settings -conf_seed=Seed for new worlds -conf_random=Choose randomly -conf_type=Type for new worlds -conf_type_default=Default -conf_type_flat=Flat land -conf_type_amplified=Amplified -conf_type_largebiomes=Large biomes -conf_structs=Generate NPC villages? -conf_nether=Allow access to Nether? -conf_err=Failed to save server configuration -conf_eseen=Missing or invalid-looking seed -conf_flight=Allow flying in survival mode? -conf_difficulty=Default difficulty -conf_gamemode=Default game mode -conf_hardcore=Hardcore (permanent death) mode? -conf_players=Maximum concurrent players -conf_ticks=Max time between ticks -conf_ticksecs=seconds -conf_eticks=Max time between ticks must be a number -conf_motd=Server message -conf_motdmsg=Custom message -conf_online=Validate Minecraft accounts? -conf_pvp=Allow players to kill each other? -conf_build=Maximum build height -conf_eplayers=Maximum concurrent players must be a positive number -conf_ebuild=Maximum build height must be a positive number -conf_animals=Spawn animals? -conf_monsters=Spawn monsters? -conf_npcs=Spawn NPCs? -conf_protect=Spawn protection radius -conf_command=Allow command block? -conf_ip=Listen on IP address -conf_port=Listen on port -conf_allip=Any address -conf_query=Enable query protocol? -conf_rcon=Enable remote console? -conf_eprotect=Spawn protection radius must be a number -conf_eip=Missing or invalid IP address -conf_eport=Missing on non-numeric port number -conf_args=Java command-line flags - -users_title=Users and Operators -users_tabwhite=Allowed users -users_tabop=Operators -users_tabip=Banned IPs -users_apply=Save and Apply -users_whitedesc=When enabled, only users listed here will be allowed to connect to this Minecraft server. -users_opdesc=Only users listed here are allowed to run administration commands on this Minecraft server. -users_ipdesc=IP addresses listed here will not be allowed to connect to this Minecraft server. -users_enabled=Whitelist enforcement enabled? - -conns_title=Connected Players -conns_desc=The following players are currently connected to your server. Click on a player name to perform actions on it. -conns_edown=Connected players cannot be managed unless the server is running -conns_none=No players are currently connected to the server. -conns_disc=Disconnect Selected -conns_enter=Manage player named: -conns_ok=OK -conns_return=player list - -logs_title=Search Log File -logs_lines=Show last -logs_matching=lines matching -logs_ok=Search - -console_title=Server Console -console_run=Enter command -console_ok=OK -console_old=or select previous -console_edit=Edit Previous -console_edown=The Minecraft server console cannot be used unless the server is running - -conn_title=Manage Player -conn_header=Player details and actions -conn_name=Player name -conn_uuid=Player UUID -conn_state=Current state -conn_yes=Connected -conn_no=Disconnected -conn_lastin=Logged in from -conn_lastin2=Last logged in from -conn_lastout=Logged out at -conn_at=$1 at $2 -conn_msg=Send direct message -conn_pos=Position at login -conn_msgb=Send -conn_kill=Terminate player -conn_killb=Kill Now -conn_ename=Missing or invalid player name -conn_give=Grant item with ID -conn_count=count -conn_giveb=Give -conn_xp=Grant XP -conn_xp0=orbs -conn_xp1=level -conn_xpb=Give -conn_never=This player has not logged into the server recently, and may not even exist. -conn_err=Player action failed -conn_etext=Missing message text -conn_msgdone=Sent message to player -conn_killdone=Killed player -conn_eid=Missing or invalid item ID -conn_ecount=Missing or non-numeric item count -conn_givedone=Gave $2 of item $1 to player -conn_xpdone=Gave $1 XP orbs to player -conn_exp=Missing number of XP to grant -conn_explevel=Level is too high to compute orbs -conn_spawn=Change spawn point -conn_spawnb=Set -conn_tp=Teleport to point -conn_tpb=Move -conn_tpp=Teleport to player -conn_banlist=Ban list state -conn_banned=Banned! -conn_pardoned=Allowed -conn_pardonb=Pardon Player -conn_banb=Ban Player -conn_oplist=Operator state -conn_opb=Grant Operator -conn_deopb=Revoke Operator -conn_ex=X position must be an integer -conn_ey=Y position must be an integer -conn_ez=Z position must be an integer -conn_spawndone=Moved spawn point to $1, $2, $3 -conn_tpdone=Teleported player to $1, $2, $3 -conn_tppdone=Teleported player to location of $1 -conn_bandone=Banned player $1 -conn_pardondone=Pardoned player $1 -conn_reason=for reason -conn_opdone=Granted operator status -conn_deopdone=Revoked operator status -conn_ebutton=No button clicked! -conn_kick=Disconnect player -conn_kickb=Kick Now -conn_kickdone=Disconnected player -conn_edate=Date and time -conn_emsg=Event message -conn_events=Recent events -conn_noperl=The Perl module $1 needed to read stats is not installed! -conn_ejson=Failed to read player stats file : $1 -conn_stats=Player statistics -conn_stat=Statistic -conn_statv=Value -conn_nostats=No statistics have been recorded yet - -worlds_title=Manage Worlds -worlds_def=Active? -worlds_name=World name -worlds_size=Data size -worlds_seed=World seed -worlds_players=All players -worlds_change=Change Active World -worlds_change2=Change World And Restart Server -worlds_new=Create a new world. -worlds_none=No worlds have been created yet! -worlds_return=list of worlds -worlds_err=Failed to change world -worlds_esel=No world selected! - -world_edit=Edit World -world_create=Create World -world_header=Minecraft world details -world_name=Directory name -world_src=Source for new world -world_src0=Create empty world -world_src1=Clone existing world -world_src2=Use uploaded ZIP file -world_src3=Use ZIP file on server -world_delete=Delete World Forever -world_players=Players who have connected -world_err1=Failed to create world -world_err2=Failed to delete world -world_state=Current state -world_state0=Server not running -world_state1=Active world -world_state2=Inactive world -world_rusure=Are you sure you want to delete the Minecraft world $1? All map, player and item data will be lost FOREVER! -world_confirm=Yes, Delete This World -world_einuse=The currently active world cannot be deleted. -world_eupload=No world data to upload selected -world_efile=No world data filename entered -world_efile2=World data file does not exist -world_ezip=Uploaded world data does not appear to be in ZIP format -world_eunzip=Failed to unzip world data : $1 -world_edat=ZIP file does not contain a level.dat file -world_download=Download ZIP File - -chooser_title=Select Item -chooser_id=Item ID -chooser_num=Item Num -chooser_name=Item name -chooser_none=No items matched your search -chooser_search=Show items matching -chooser_ok=Search - -cmds_title=World Commands -cmds_header=World-level operations -cmds_gamemode=Change default game mode -cmds_survival=Survival -cmds_creative=Creative -cmds_adventure=Adventure -cmds_gamemodeb=Change Mode -cmds_difficulty=Change difficulty level -cmds_peaceful=Peaceful -cmds_easy=Easy -cmds_normal=Normal -cmds_hard=Hard -cmds_difficultyb=Switch Level -cmds_time=Change game time -cmds_day=Day time -cmds_night=Night time -cmds_set=Set to time -cmds_add=Add time -cmds_timeb=Change Time -cmds_downfall=Trigger rain or snow -cmds_downfallb=Start Precipitation -cmds_weather=Change weather -cmds_clear=Clear skies -cmds_rain=Rain -cmds_thunder=Thunderstorm -cmds_for=for time -cmds_weatherb=Change -cmds_err=World command failed -cmds_downfalldone=Started rain or snow -cmds_esecs=Time to change weather for must be a positive number of seconds -cmds_weatherdone=Changed weather to $1 for $2 seconds -cmds_etimeset=Time to set must be a number between 0 and 24000 -cmds_etimeadd=Time to add must be a number between 0 and 24000 -cmds_timedone=Changed game time -cmds_gamemodedone=Changed default game mode to $1 -cmds_difficultydone=Changed game difficulty -cmds_say=Broadcast message -cmds_sayb=Send -cmds_msgdone=Sent message to all players - -manual_title=Edit Configuration File -manual_desc=This page allows you to manually edit the Minecraft server configuration file $1. Be careful, as no validation will be done on your input. Any changes will not be activated until the server is restarted. -manual_err=Failed to save configuration file -manual_econf=Nothing entered! - -download_title=Download Minecraft Server -download_already=Your system is already running the latest version of the Minecraft server. -download_done=Your system has been upgraded to the latest version of the Minecraft server. -download_done2=The latest version of the Minecraft server has been downloaded to your system. -download_restart=The new version will only be used when the server is restarted. -download_start=The server must be started before it can be used. -download_mkdir=Creating base directory $1 .. -download_emkdir=Directory creation failed! -download_err=Failed to setup Minecraft server -download_edir=Missing or non-absolute install directory -download_euser=User to run as does not exist -download_eurl=Failed to get server download URL - -backup_title=Scheduled Backup -backup_header=Options for scheduled world backup -backup_sched=Backup schedule -backup_enabled=Backup enabled? -backup_dir=Backup to directory -backup_worlds=Worlds to include -backup_worlds1=All worlds -backup_worlds0=Only selected .. -backup_err=Failed to save scheduled backup -backup_edir=Missing or non-absolute destination directory -backup_eworlds=No worlds selected -backup_desc=This page allows you to setup automatic scheduled backups of your Minecraft server worlds. The destination directory can contain strftime-style date codes like %d, %m and %Y to save separate daily backups. -backup_email=Email backup report to -backup_noemail=Nobody -backup_email_err=Only send email on failure -backup_emailto=Address -backup_ezip=The ZIP command is not installed! -backup_now=Save and Backup Now -backup_doing=Backing up selected worlds .. -backup_failed=.. backup failed! -backup_done=.. backup complete - -log_conf=Changed server configuration -log_stop=Stopped Minecraft server -log_start=Started Minecraft server -log_restart=Restarted Minecraft server -log_white=Updated allowed users -log_op=Updated operator users -log_ip=Updated banned IPs -log_manual=Manually edited configuration file -log_atboot=Enabled server at boot time -log_delboot=Disabled server at boot time -log_enable_backup=Enabled scheduled backups to $1 -log_disable_backup=Disabled scheduled backups -log_playtime=Changed play time limits -log_changeversion=Changed server to version $1 -log_addversion=Added server version $1 - -monitor_up=Minecraft Server Alive -monitor_latest=Minecraft Server Up To Date -monitor_down=Server process is down -monitor_noreply=Server is not responding -monitor_notype=Unknown monitor type! -monitor_newversion=New version is available -monitor_nojar=JAR file $1 does not exist -monitor_checklog=Check server response to commands? - -playtime_title=Daily Play Time -playtime_user=Username -playtime_time=Time online -playtime_ltime=Enforced time -playtime_now=Status -playtime_none=No players were connected for this day. -playtime_on=Online -playtime_off=Offline -playtime_header=Daily play limit settings -playtime_enabled=Limits enabled? -playtime_max=Maximum time per day -playtime_unlimited=Unlimited -playtime_mins=minutes -playtime_days=Days to enforce on -playtime_users=Apply to users -playtime_sel=Listed -playtime_all=All users -playtime_ips=Apply to connections from -playtime_sel2=Listed IPs and networks -playtime_all2=All addresses -playtime_err=Failed to save play time limits -playtime_emax=Maximum time must be a number -playtime_eusers=No users to limit entered -playtime_edays=No days of the week selected -playtime_eips=No IP addresses entered -playtime_total=Total time -playtime_date=Show play time on : -playtime_ok=Show -playtime_today=<Today> -playtime_alldays=<All days combined> - -versions_title=Minecraft Versions -versions_file=Filename -versions_desc=Description -versions_size=JAR Size -versions_run=Running? -versions_save=Change Version -versions_restart=Change Version and Restart -versions_save2=Change Version and Restart Server -versions_none=No Minecraft versions found! -versions_header=Add Minecraft Version -versions_src=JAR file source -versions_src0=Download from URL -versions_src1=Upload file -versions_src2=Latest version $1 from $2 -versions_newver=Server version -versions_newsame=Work out from filename -versions_all=Install Version -versions_echange=Selected version does not exist -versions_err=Failed to add new version -versions_eurl=Missing URL to download from -versions_eurl2=URL is not valid -versions_ejar=No JAR file uploaded -versions_ejar2=JAR file does not have a filename -versions_ever=Could not work out version from JAR filename -versions_enewver=Version must be numeric -versions_eclash=A server with the same filename already exists! -versions_efmt=File is not a JAR -versions_elatesturl=Could not fetch download URL from $1 diff --git a/mysql/lang/fa.auto b/mysql/lang/fa.auto index 1cb72c96c..ad0bdb6a2 100644 --- a/mysql/lang/fa.auto +++ b/mysql/lang/fa.auto @@ -10,7 +10,6 @@ index_clear=پاک کردن index_stop=سرور MySQL را متوقف کنید index_stopmsg=روی این دکمه کلیک کنید تا سرور پایگاه داده MySQL در سیستم شما متوقف شود. با این کار از دسترسی هر کاربر یا برنامه به پایگاه داده ، از جمله این ماژول Webmin جلوگیری می شود. index_restart=سرور MySQL را مجددا راه اندازی کنید -index_restartmsg=Click this button to restart the MySQL database server on your system. All clients will be disconnected, and any configuration files will be reloaded. index_dbs=پایگاه داده MySQL index_add=ایجاد یک پایگاه داده جدید. index_global=گزینه های جهانی diff --git a/net/lang/de b/net/lang/de index d86a83347..ceb0593ed 100644 --- a/net/lang/de +++ b/net/lang/de @@ -348,4 +348,4 @@ dbifcs_err2=Fehler beim Aktivieren von Schnittstellen hdelete_err=Fehler beim Löschen von Host-Adressen hdelete_enone=Keine ausgewählt -idelete_err=Fehler beim Löschen von IPv6-Host-Adressen +idelete_err=Fehler beim Löschen von IPv6-Host-Adressen \ No newline at end of file diff --git a/nis/lang/de b/nis/lang/de index 731be4710..60e0feb0c 100644 --- a/nis/lang/de +++ b/nis/lang/de @@ -303,4 +303,4 @@ eswitch_return=Ergebnis zurückgeben eswitch_continue=Suche fortsetzen eswitch_none=Keine eswitch_err=Fehler beim Speichern des Dienstes -eswitch_enone=Keine Quellen ausgewählt! +eswitch_enone=Keine Quellen ausgewählt! \ No newline at end of file diff --git a/openslp/lang/de b/openslp/lang/de index 6fe969432..7b2fd3eb0 100644 --- a/openslp/lang/de +++ b/openslp/lang/de @@ -47,4 +47,4 @@ index_stop=OpenSLP stoppen index_stopmsg=Klicken Sie auf diese Schaltfläche, um den OpenSLP-Daemon auf Ihrem System zu stoppen. stop_err=Fehler beim Stoppen von OpenSLP -start_err=Fehler beim Starten von OpenSLP +start_err=Fehler beim Starten von OpenSLP \ No newline at end of file diff --git a/pam/lang/de b/pam/lang/de index 220e956bc..015e062c2 100644 --- a/pam/lang/de +++ b/pam/lang/de @@ -289,4 +289,4 @@ inc_edit=Integrierten Dienst bearbeiten inc_create=Integrierten Dienst erstellen inc_header=Details des integrierten PAM-Dienstes inc_inc=Integrierter PAM-Dienst -inc_err=Fehler beim Speichern des integrierten Dienstes +inc_err=Fehler beim Speichern des integrierten Dienstes \ No newline at end of file diff --git a/pap/lang/de b/pap/lang/de index 8b6e0eb93..20ab1e11a 100644 --- a/pap/lang/de +++ b/pap/lang/de @@ -92,6 +92,7 @@ options_ecannot=Sie dürfen PPP-Optionen nicht bearbeiten mgetty_title=Konfiguration der seriellen Ports mgetty_ecmd=Der Befehl $1 wurde auf Ihrem System nicht gefunden. Dieses Programm wird benötigt, um Anmeldungen über Modem oder Direktverbindung an einem seriellen Port zu behandeln. +mgetty_desc,Um Ihrem Server zu ermöglichen, Anmeldungen an einem seriellen Port über Modem oder Direktverbindung zuzulassen, muss er unten aufgeführt werden. Wenn Sie einen Port zu dieser Liste hinzufügen, wird das $1-Programm so konfiguriert, dass es Modemverbindungen beantwortet und eine Anmeldeaufforderung anzeigt. mgetty_add=Neuen seriellen Port hinzufügen. mgetty_tty=Serielles Gerät mgetty_vgetty=Voicemail @@ -159,4 +160,4 @@ sync_ecannot=Sie dürfen die Optionen zur Synchronisierung von Unix-PPP nicht be sync_title=Benutzersynchronisierung delete_err=Fehler beim Löschen der Konten -delete_enone=Keine ausgewählt +delete_enone=Keine ausgewählt \ No newline at end of file diff --git a/pap/lang/de.auto b/pap/lang/de.auto deleted file mode 100644 index 1f7686ef0..000000000 --- a/pap/lang/de.auto +++ /dev/null @@ -1 +0,0 @@ -mgetty_desc=For your server to allow logins on a serial port via modem or a direct connection, it must be listed below. When you add a port to this list, the $1 program will be configured to answer modem connections and display a login prompt. diff --git a/passwd/lang/de b/passwd/lang/de index de4326a9e..feb1af9c6 100644 --- a/passwd/lang/de +++ b/passwd/lang/de @@ -43,4 +43,4 @@ acl_mode5=Benutzer mit primärer Gruppe acl_mode6=Benutzer, die übereinstimmen acl_expire=Kann Benutzer zwingen, das Passwort beim nächsten Login zu ändern? acl_sec=Sekundäre Gruppen einbeziehen? -acl_notusers=Außer für Benutzer +acl_notusers=Außer für Benutzer \ No newline at end of file diff --git a/passwd/lang/zh b/passwd/lang/zh index c86eb82b9..b71fff7f4 100644 --- a/passwd/lang/zh +++ b/passwd/lang/zh @@ -44,3 +44,4 @@ acl_mode6=用户匹配 acl_expire=可以强制用户在下次登录时更改密码吗？ acl_sec=是否包括次要组？ acl_notusers=除用户之外 +__norefs=1 diff --git a/phpini/lang/af.auto b/phpini/lang/af.auto index d86aebae3..cdcfd5f84 100644 --- a/phpini/lang/af.auto +++ b/phpini/lang/af.auto @@ -152,32 +152,6 @@ misc_path=CGI Fix-padinligting? misc_timezone=PHP Tydsone misc_charset=Standaardkarakterstel -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Redigeer lêer $1 handmatig log_vars=PHP-veranderlikes in $1 verander log_dirs=Die gidsinstellings in $1 verander @@ -187,7 +161,6 @@ log_safe=Die veilige modus-opsies in $1 verander log_limits=Veranderde hulpbronlimiete in $1 log_errors=Fout aanmelding $1 verander log_misc=Ander instellings in $1 verander -log_mods=Updated enabled modules in $1 acl_global=Kan die globale PHP-opstelling verander? acl_anyfile=Kan u enige lêer as 'n PHP-opstelling wysig? diff --git a/phpini/lang/ar.auto b/phpini/lang/ar.auto index 92aa51ff2..5fd16e9bf 100644 --- a/phpini/lang/ar.auto +++ b/phpini/lang/ar.auto @@ -152,32 +152,6 @@ misc_path=معلومات مسار إصلاح CGI؟ misc_timezone=المنطقة الزمنية PHP misc_charset=مجموعة الأحرف الافتراضية -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=تحرير الملف$1 يدويًا log_vars=تم تغيير متغيرات PHP في$1 log_dirs=تم تغيير إعدادات الدليل في$1 @@ -187,7 +161,6 @@ log_safe=تم تغيير خيارات الوضع الآمن في$1 log_limits=تم تغيير حدود الموارد في$1 log_errors=تم تغيير خطأ تسجيل الدخول في$1 log_misc=تم تغيير الإعدادات الأخرى في$1 -log_mods=Updated enabled modules in $1 acl_global=يمكن تحرير تكوين PHP العالمي؟ acl_anyfile=يمكن تحرير أي ملف كتهيئة PHP؟ diff --git a/phpini/lang/be.auto b/phpini/lang/be.auto index ec8ac2d34..8b7645759 100644 --- a/phpini/lang/be.auto +++ b/phpini/lang/be.auto @@ -152,32 +152,6 @@ misc_path=Інфармацыя пра выправіць шлях CGI? misc_timezone=Часовы пояс PHP misc_charset=Набор сімвалаў па змаўчанні -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Файл $1 рэдагуйце ўручную log_vars=Зменены зменныя PHP у $1 log_dirs=Зменены налады каталога ў $1 @@ -187,7 +161,6 @@ log_safe=Зменены параметры бяспечнага рэжыму ў log_limits=Зменены ліміт рэсурсаў у $1 log_errors=Змененая памылка ўваходу ў $1 log_misc=Зменены іншыя налады ў $1 -log_mods=Updated enabled modules in $1 acl_global=Ці можна рэдагаваць глабальную канфігурацыю PHP? acl_anyfile=Ці можна рэдагаваць любы файл у выглядзе канфігурацыі PHP? diff --git a/phpini/lang/bg.auto b/phpini/lang/bg.auto index 8437807db..0a6745028 100644 --- a/phpini/lang/bg.auto +++ b/phpini/lang/bg.auto @@ -152,32 +152,6 @@ misc_path=Информация за CGI Fix Path? misc_timezone=PHP часова зона misc_charset=Набор символи по подразбиране -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Ръчно редактиране на файл $1 log_vars=Променени PHP променливи в $1 log_dirs=Променени настройките на директория в $1 @@ -187,7 +161,6 @@ log_safe=Променени опции за безопасен режим в $1 log_limits=Променени ограничения за ресурси в $1 log_errors=Променена грешка при влизане в $1 log_misc=Променени други настройки в $1 -log_mods=Updated enabled modules in $1 acl_global=Може ли да редактирате глобалната PHP конфигурация? acl_anyfile=Може ли да редактирате всеки файл като PHP конфигурация? diff --git a/phpini/lang/ca.auto b/phpini/lang/ca.auto index 0eddf5d22..524fd5245 100644 --- a/phpini/lang/ca.auto +++ b/phpini/lang/ca.auto @@ -8,33 +8,5 @@ session_memcache=MemcacheD limits_vars=Límit màxim de variables d'entrada limits_evars=Falta el límit màxim de variables d'entrada o no és vàlid -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - -log_mods=Updated enabled modules in $1 - opt_default=Valor per defecte: $1 opt_default_unknown=Desconegut diff --git a/phpini/lang/cs.auto b/phpini/lang/cs.auto index 75ec495a5..779b6f4b2 100644 --- a/phpini/lang/cs.auto +++ b/phpini/lang/cs.auto @@ -17,34 +17,6 @@ misc_path=Informace o opravné cestě CGI? misc_timezone=Časové pásmo PHP misc_charset=Výchozí znaková sada -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - -log_mods=Updated enabled modules in $1 - acl_user=Čtení a zápis souborů jako uživatel opt_default=Výchozí hodnota: $1 diff --git a/phpini/lang/da.auto b/phpini/lang/da.auto index 1b93a5695..25ce3ff66 100644 --- a/phpini/lang/da.auto +++ b/phpini/lang/da.auto @@ -152,32 +152,6 @@ misc_path=CGI Fix Path Info? misc_timezone=PHP-tidszone misc_charset=Standard tegnsæt -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Rediger fil $1 manuelt log_vars=Ændrede PHP-variabler i $1 log_dirs=Ændrede biblioteksindstillinger i $1 @@ -187,7 +161,6 @@ log_safe=Ændrede indstillinger for sikker tilstand i $1 log_limits=Ændrede ressourcegrænser i $1 log_errors=Ændret fejllogging i $1 log_misc=Ændrede andre indstillinger i $1 -log_mods=Updated enabled modules in $1 acl_global=Kan redigere global PHP-konfiguration? acl_anyfile=Kan redigere en hvilken som helst fil som en PHP-konfiguration? diff --git a/phpini/lang/de b/phpini/lang/de index 5fd54bc63..2b36b1489 100644 --- a/phpini/lang/de +++ b/phpini/lang/de @@ -196,4 +196,4 @@ acl_inis=Zusätzliche Konfigurationsdateien
(Im Format Dateiname=Be acl_user=Dateien als Benutzer lesen und schreiben opt_default=Standardwert: $1 -opt_default_unknown=Unbekannt +opt_default_unknown=Unbekannt \ No newline at end of file diff --git a/phpini/lang/el.auto b/phpini/lang/el.auto index 447075d79..22b7e00f9 100644 --- a/phpini/lang/el.auto +++ b/phpini/lang/el.auto @@ -152,32 +152,6 @@ misc_path=CGI Fix Path Info; misc_timezone=PHP Timezone misc_charset=Προεπιλεγμένο σύνολο χαρακτήρων -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Μη αυτόματη επεξεργασία του αρχείου $1 log_vars=Αλλαγή μεταβλητών PHP στο $1 log_dirs=Αλλαγή ρυθμίσεων καταλόγου σε $1 @@ -187,7 +161,6 @@ log_safe=Τροποποιημένες επιλογές ασφαλούς λειτ log_limits=Τροποποιημένα όρια πόρων στο $1 log_errors=Αλλαγή καταγραφής σφαλμάτων στο $1 log_misc=Αλλαγή άλλων ρυθμίσεων στο $1 -log_mods=Updated enabled modules in $1 acl_global=Μπορεί να επεξεργαστεί την παγκόσμια διαμόρφωση PHP; acl_anyfile=Μπορεί να επεξεργαστεί οποιοδήποτε αρχείο ως διαμόρφωση PHP; diff --git a/phpini/lang/es.auto b/phpini/lang/es.auto index 488462d1e..91e7d29bd 100644 --- a/phpini/lang/es.auto +++ b/phpini/lang/es.auto @@ -152,32 +152,6 @@ misc_path=Información de ruta de reparación de CGI? misc_timezone=Zona horaria de PHP misc_charset=Conjunto de caracteres predeterminado -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Editar manualmente el archivo $1 log_vars=Variables PHP modificadas en $1 log_dirs=Se modificó la configuración del directorio en $1 @@ -187,7 +161,6 @@ log_safe=Se cambiaron las opciones de modo seguro en $1 log_limits=Se modificaron los límites de recursos en $1 log_errors=Se modificó el registro de errores en $1 log_misc=Cambió otras configuraciones en $1 -log_mods=Updated enabled modules in $1 acl_global=¿Se puede editar la configuración global de PHP? acl_anyfile=¿Se puede editar cualquier archivo como una configuración PHP? diff --git a/phpini/lang/eu.auto b/phpini/lang/eu.auto index 1d2bac068..8c19fdeeb 100644 --- a/phpini/lang/eu.auto +++ b/phpini/lang/eu.auto @@ -152,32 +152,6 @@ misc_path=CGI Konpondu bideen informazioa? misc_timezone=PHP Ordu-eremua misc_charset=Lehenetsitako karaktere-multzoa -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=$1 fitxategia eskuz editatu log_vars=$1 aldatutako PHP aldagaiak log_dirs=$1 ean direktorioko ezarpenak aldatu dira @@ -187,7 +161,6 @@ log_safe=$1 modu seguruko aukerak aldatu dira log_limits=Baliabideen mugak aldatu dira $1 ean log_errors=Aldatu egin da errorea $1 erregistratzean log_misc=Beste ezarpen batzuk aldatu dira $1 ean -log_mods=Updated enabled modules in $1 acl_global=PHP konfigurazio globala editatu al dezakezu? acl_anyfile=PHP konfigurazio gisa edita daiteke edozein fitxategi? diff --git a/phpini/lang/fa.auto b/phpini/lang/fa.auto index 56a15285b..b98748388 100644 --- a/phpini/lang/fa.auto +++ b/phpini/lang/fa.auto @@ -152,32 +152,6 @@ misc_path=CGI اطلاعات مسیر را برطرف کنید؟ misc_timezone=منطقه زمانی PHP misc_charset=مجموعه کاراکتر پیش فرض -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=ویرایش دستی پرونده$1 log_vars=متغیرهای PHP در$1 تغییر یافت log_dirs=تنظیمات فهرست را در$1 تغییر داد @@ -187,7 +161,6 @@ log_safe=گزینه های حالت ایمن در$1 تغییر یافت log_limits=محدودیت منابع در$1 تغییر یافته است log_errors=خطای ورود به سیستم در$1 تغییر کرده است log_misc=تنظیمات دیگر را در$1 تغییر داد -log_mods=Updated enabled modules in $1 acl_global=آیا می توانید پیکربندی جهانی پی اچ پی را ویرایش کنید؟ acl_anyfile=آیا می توانید هر پرونده را به عنوان پیکربندی PHP ویرایش کنید؟ diff --git a/phpini/lang/fi.auto b/phpini/lang/fi.auto index 2c380eb0c..5e6c005c2 100644 --- a/phpini/lang/fi.auto +++ b/phpini/lang/fi.auto @@ -152,32 +152,6 @@ misc_path=CGI-korjaustiedon tiedot? misc_timezone=PHP-aikavyöhyke misc_charset=Oletusmerkki -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Muokkaa tiedostoa $1 manuaalisesti log_vars=Muutetut PHP-muuttujat $1 : ssä log_dirs=Muutettu hakemistoasetukset $1 : ssa @@ -187,7 +161,6 @@ log_safe=Vikasietotilan vaihtoehdot $1 : ssä log_limits=Muutetut resurssirajat $1 : ssä log_errors=Muutos virheilmoituksessa $1 : ssä log_misc=Muutti $1 : n muita asetuksia -log_mods=Updated enabled modules in $1 acl_global=Voiko muokata PHP: n globaalia kokoonpanoa? acl_anyfile=Voiko mitä tahansa tiedostoa muokata PHP-kokoonpanona? diff --git a/phpini/lang/fr.auto b/phpini/lang/fr.auto index bc97c1e10..3e5a8ba48 100644 --- a/phpini/lang/fr.auto +++ b/phpini/lang/fr.auto @@ -8,33 +8,5 @@ session_memcache=MemcacheD limits_vars=Limite maximale des variables d'entrée limits_evars=Limite maximale des variables d'entrée manquante ou invalide -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - -log_mods=Updated enabled modules in $1 - opt_default=Valeur par défaut : $1 opt_default_unknown=Inconnu diff --git a/phpini/lang/he.auto b/phpini/lang/he.auto index 9e1182e4d..93b6bb540 100644 --- a/phpini/lang/he.auto +++ b/phpini/lang/he.auto @@ -152,32 +152,6 @@ misc_path=מידע על נתיב CGI לתיקון? misc_timezone=אזור זמן PHP misc_charset=הגדרת תו ברירת מחדל -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=ערוך ידני את הקובץ $1 log_vars=משתני PHP השתנו ב- $1 log_dirs=שינו את הגדרות הספריה ב- $1 @@ -187,7 +161,6 @@ log_safe=אפשרויות מצב בטוח השתנו ב- $1 log_limits=מגבלות המשאבים השתנו ב- $1 log_errors=רישום השגיאה השתנה ב- $1 log_misc=שינו הגדרות אחרות ב- $1 -log_mods=Updated enabled modules in $1 acl_global=האם ניתן לערוך תצורת PHP גלובלית? acl_anyfile=האם ניתן לערוך כל קובץ כתצורת PHP? diff --git a/phpini/lang/hr.auto b/phpini/lang/hr.auto index ad7043d29..d3189bc33 100644 --- a/phpini/lang/hr.auto +++ b/phpini/lang/hr.auto @@ -152,32 +152,6 @@ misc_path=Informacije o putu popravka CGI-ja? misc_timezone=Vremenska zona PHP misc_charset=Zadani skup znakova -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Ručno uređivanje datoteke $1 log_vars=Promijenjene PHP varijable u $1 log_dirs=Promijenjene su postavke u $1 @@ -187,7 +161,6 @@ log_safe=Izmijenjene opcije sigurnog načina u $1 log_limits=Izmijenjena ograničenja resursa u $1 log_errors=Izmijenjena prijava pogreške u $1 log_misc=Izmijenjene su druge postavke u $1 -log_mods=Updated enabled modules in $1 acl_global=Može li se urediti globalna PHP konfiguracija? acl_anyfile=Možete li urediti bilo koju datoteku kao PHP konfiguraciju? diff --git a/phpini/lang/hu.auto b/phpini/lang/hu.auto index c0f091ac4..75c5d9b65 100644 --- a/phpini/lang/hu.auto +++ b/phpini/lang/hu.auto @@ -124,32 +124,6 @@ misc_path=CGI Fix Path Info? misc_timezone=PHP időzóna misc_charset=Alapértelmezett karakterkészlet -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=A (z) $1 fájl kézi szerkesztése log_vars=Megváltozott a PHP változók $1 -ben log_dirs=Megváltozott a könyvtári beállítások a $1 -ben @@ -159,7 +133,6 @@ log_safe=Megváltozott a biztonságos mód opciói a $1 -ben log_limits=Megváltozott erőforrás-korlátok $1 -ben log_errors=Megváltozott a hibás naplózás $1 -ben log_misc=Megváltoztatta a $1 egyéb beállításait -log_mods=Updated enabled modules in $1 acl_manual=Kézzel lehet szerkeszteni a konfigurációs fájlokat? acl_inis=További konfigurációs fájlok
( fájlnév = leírás formátumban) diff --git a/phpini/lang/it.auto b/phpini/lang/it.auto index 7347b162e..829571e9d 100644 --- a/phpini/lang/it.auto +++ b/phpini/lang/it.auto @@ -40,36 +40,9 @@ misc_path=Informazioni sul percorso di correzione CGI? misc_timezone=Fuso orario PHP misc_charset=Set di caratteri predefinito -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_vars=Variabili PHP modificate in $1 log_session=Opzioni di sessione modificate in $1 log_safe=Opzioni della modalità provvisoria modificate in $1 -log_mods=Updated enabled modules in $1 acl_user=Leggi e scrivi i file come utente diff --git a/phpini/lang/ja.auto b/phpini/lang/ja.auto index 5c233053d..5ccf358cc 100644 --- a/phpini/lang/ja.auto +++ b/phpini/lang/ja.auto @@ -152,32 +152,6 @@ misc_path=CGI Fix Path Info？ misc_timezone=PHPタイムゾーン misc_charset=デフォルトの文字セット -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=ファイル $1を手動で編集します log_vars=$1のPHP変数を変更しました log_dirs=$1のディレクトリ設定を変更しました @@ -187,7 +161,6 @@ log_safe=$1のセーフモードオプションを変更しました log_limits=$1のリソース制限を変更しました log_errors=$1のエラーログを変更しました log_misc=$1の他の設定を変更しました -log_mods=Updated enabled modules in $1 acl_global=グローバルなPHP構成を編集できますか？ acl_anyfile=PHP構成として任意のファイルを編集できますか？ diff --git a/phpini/lang/ko.auto b/phpini/lang/ko.auto index c08071fc5..46274d0c3 100644 --- a/phpini/lang/ko.auto +++ b/phpini/lang/ko.auto @@ -17,34 +17,6 @@ misc_path=CGI 수정 경로 정보? misc_timezone=PHP 시간대 misc_charset=기본 문자 세트 -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - -log_mods=Updated enabled modules in $1 - acl_user=사용자로서 파일 읽기 및 쓰기 opt_default=기본값: $1 diff --git a/phpini/lang/lt.auto b/phpini/lang/lt.auto index be88edca8..3dd2cc310 100644 --- a/phpini/lang/lt.auto +++ b/phpini/lang/lt.auto @@ -152,32 +152,6 @@ misc_path=CGI nustatyto kelio informacija? misc_timezone=PHP laiko juosta misc_charset=Numatytasis simbolių rinkinys -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Rankiniu būdu redaguoti failą $1 log_vars=Pakeisti PHP kintamieji $1 log_dirs=Pakeisti katalogo nustatymai $1 @@ -187,7 +161,6 @@ log_safe=Pakeistos saugaus režimo parinktys $1 log_limits=Pakeisti išteklių apribojimai $1 log_errors=Pakeista prisijungimo klaida $1 log_misc=Pakeitė kitus parametrus $1 -log_mods=Updated enabled modules in $1 acl_global=Ar galite redaguoti visuotinę PHP konfigūraciją? acl_anyfile=Ar galite redaguoti bet kurį failą kaip PHP konfigūraciją? diff --git a/phpini/lang/lv.auto b/phpini/lang/lv.auto index f3b4aacc3..baa26f890 100644 --- a/phpini/lang/lv.auto +++ b/phpini/lang/lv.auto @@ -152,32 +152,6 @@ misc_path=CGI fiksētā ceļa informācija? misc_timezone=PHP laika josla misc_charset=Noklusējuma rakstzīmju kopa -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Failu $1 manuāli rediģēt log_vars=Mainīti PHP mainīgie $1 log_dirs=Mainīti direktorija iestatījumi $1 @@ -187,7 +161,6 @@ log_safe=Mainītas drošā režīma iespējas $1 log_limits=Mainīti resursu ierobežojumi $1 log_errors=Mainītas kļūdas, reģistrējoties $1 log_misc=Mainīti citi $1 iestatījumi -log_mods=Updated enabled modules in $1 acl_global=Vai var rediģēt globālo PHP konfigurāciju? acl_anyfile=Vai var rediģēt jebkuru failu kā PHP konfigurāciju? diff --git a/phpini/lang/ms.auto b/phpini/lang/ms.auto index be1077b57..6841eee8e 100644 --- a/phpini/lang/ms.auto +++ b/phpini/lang/ms.auto @@ -152,32 +152,6 @@ misc_path=CGI Fix Info Path? misc_timezone=PHP Timezone misc_charset=Set aksara piawai -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Edit fail secara manual $1 log_vars=Perubahan PHP berubah dalam $1 log_dirs=Tetapan direktori berubah dalam $1 @@ -187,7 +161,6 @@ log_safe=Pilihan mod selamat yang diubah dalam $1 log_limits=Had sumber yang berubah dalam $1 log_errors=Pembalakan ralat berubah dalam $1 log_misc=Menukar tetapan lain dalam $1 -log_mods=Updated enabled modules in $1 acl_global=Boleh mengedit konfigurasi PHP global? acl_anyfile=Bolehkah mengedit sebarang fail sebagai konfigurasi PHP? diff --git a/phpini/lang/mt.auto b/phpini/lang/mt.auto index f2ad3cbbf..fc5914090 100644 --- a/phpini/lang/mt.auto +++ b/phpini/lang/mt.auto @@ -152,32 +152,6 @@ misc_path=Informazzjoni dwar il-Path Waħħal CGI? misc_timezone=Żona tal-ħin PHP misc_charset=Sett ta 'karattri awtomatiku -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Editja l-fajl manwalment $1 log_vars=Bidliet fil-varjabbli PHP f' $1 log_dirs=Inbidlet is-settings tad-direttorju f ' $1 @@ -187,7 +161,6 @@ log_safe=L-għażliet tal-modalità sikura nbidlu f' $1 log_limits=Limiti ta 'riżorsi mibdula f' $1 log_errors=Inbidlet żball fl-illoggjar f ' $1 log_misc=Inbidlet issettjar ieħor f' $1 -log_mods=Updated enabled modules in $1 acl_global=Tista 'teditja l-konfigurazzjoni PHP globali? acl_anyfile=Tista 'teditja kwalunkwe fajl bħala konfigurazzjoni PHP? diff --git a/phpini/lang/nl.auto b/phpini/lang/nl.auto index f87c3ccd1..e6acf76e9 100644 --- a/phpini/lang/nl.auto +++ b/phpini/lang/nl.auto @@ -12,33 +12,5 @@ limits_evars=Ontbrekende of ongeldige maximumlimiet voor invoervariabelen misc_charset=Standaard tekenset -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - -log_mods=Updated enabled modules in $1 - opt_default=Standaardwaarde: $1 opt_default_unknown=Onbekend diff --git a/phpini/lang/no.auto b/phpini/lang/no.auto index 6e8133fea..d4ed6c849 100644 --- a/phpini/lang/no.auto +++ b/phpini/lang/no.auto @@ -8,33 +8,5 @@ session_memcache=MemcacheD limits_vars=Maksimal grense for inngangsvariabler limits_evars=Manglende eller ugyldig grense for maksimale inndatavariabler -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - -log_mods=Updated enabled modules in $1 - opt_default=Standardverdi: $1 opt_default_unknown=Ukjent diff --git a/phpini/lang/pl.auto b/phpini/lang/pl.auto index 6192abd66..ae4ce08ea 100644 --- a/phpini/lang/pl.auto +++ b/phpini/lang/pl.auto @@ -17,33 +17,5 @@ limits_evars=Brakujący lub nieprawidłowy maksymalny limit zmiennych wejściowy misc_path=Informacje o ścieżce CGI Fix? misc_charset=Domyślny zestaw znaków -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - -log_mods=Updated enabled modules in $1 - opt_default=Wartość domyślna: $1 opt_default_unknown=Nieznany diff --git a/phpini/lang/pt.auto b/phpini/lang/pt.auto index ab8411d7d..e465c3cdb 100644 --- a/phpini/lang/pt.auto +++ b/phpini/lang/pt.auto @@ -152,32 +152,6 @@ misc_path=Informações sobre o caminho de correção CGI? misc_timezone=Fuso Horário do PHP misc_charset=Conjunto de caracteres padrão -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Editar manualmente o arquivo $1 log_vars=Variáveis PHP alteradas em $1 log_dirs=Configurações de diretório alteradas em $1 @@ -187,7 +161,6 @@ log_safe=Opções de modo de segurança alteradas em $1 log_limits=Limites de recursos alterados em $1 log_errors=Erro no log de $1 log_misc=Outras configurações alteradas em $1 -log_mods=Updated enabled modules in $1 acl_global=Pode editar a configuração global do PHP? acl_anyfile=Pode editar qualquer arquivo como uma configuração PHP? diff --git a/phpini/lang/pt_BR.auto b/phpini/lang/pt_BR.auto index ab8411d7d..e465c3cdb 100644 --- a/phpini/lang/pt_BR.auto +++ b/phpini/lang/pt_BR.auto @@ -152,32 +152,6 @@ misc_path=Informações sobre o caminho de correção CGI? misc_timezone=Fuso Horário do PHP misc_charset=Conjunto de caracteres padrão -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Editar manualmente o arquivo $1 log_vars=Variáveis PHP alteradas em $1 log_dirs=Configurações de diretório alteradas em $1 @@ -187,7 +161,6 @@ log_safe=Opções de modo de segurança alteradas em $1 log_limits=Limites de recursos alterados em $1 log_errors=Erro no log de $1 log_misc=Outras configurações alteradas em $1 -log_mods=Updated enabled modules in $1 acl_global=Pode editar a configuração global do PHP? acl_anyfile=Pode editar qualquer arquivo como uma configuração PHP? diff --git a/phpini/lang/ro.auto b/phpini/lang/ro.auto index f6fab3cbf..3109768e3 100644 --- a/phpini/lang/ro.auto +++ b/phpini/lang/ro.auto @@ -152,32 +152,6 @@ misc_path=Informații despre calea CGI? misc_timezone=Fus orar PHP misc_charset=Set de caractere implicit -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Editează manual fișierul $1 log_vars=Modificată variabilele PHP în $1 log_dirs=Setările directoarelor modificate în $1 @@ -187,7 +161,6 @@ log_safe=Opțiunile modului sigur au fost schimbate în $1 log_limits=Limitarea resurselor modificată în $1 log_errors=Schimbare de eroare modificată în $1 log_misc=S-au modificat alte setări în $1 -log_mods=Updated enabled modules in $1 acl_global=Poate edita configurația PHP globală? acl_anyfile=Poate edita orice fișier ca configurație PHP? diff --git a/phpini/lang/ru.auto b/phpini/lang/ru.auto index 7aead5dab..5dbd3cd28 100644 --- a/phpini/lang/ru.auto +++ b/phpini/lang/ru.auto @@ -12,33 +12,5 @@ limits_evars=Отсутствует или недействителен макс misc_charset=Набор символов по умолчанию -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - -log_mods=Updated enabled modules in $1 - opt_default=Значение по умолчанию: $1 opt_default_unknown=Неизвестный diff --git a/phpini/lang/sk.auto b/phpini/lang/sk.auto index 16b2c4649..5644c0822 100644 --- a/phpini/lang/sk.auto +++ b/phpini/lang/sk.auto @@ -152,32 +152,6 @@ misc_path=Informácie o ceste CGI? misc_timezone=Časové pásmo PHP misc_charset=Predvolená sada znakov -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Ručne upravte súbor $1 log_vars=Zmenené premenné PHP v $1 log_dirs=Zmenené nastavenia adresára v $1 @@ -187,7 +161,6 @@ log_safe=Zmenené možnosti núdzového režimu v $1 log_limits=Zmenené limity zdrojov v $1 log_errors=Zmenené protokolovanie chýb v $1 log_misc=Ostatné nastavenia boli zmenené v $1 -log_mods=Updated enabled modules in $1 acl_global=Môžete upraviť globálnu konfiguráciu PHP? acl_anyfile=Môžete upravovať ľubovoľný súbor ako konfiguráciu PHP? diff --git a/phpini/lang/sl.auto b/phpini/lang/sl.auto index ff3e27bb6..fefd8222a 100644 --- a/phpini/lang/sl.auto +++ b/phpini/lang/sl.auto @@ -152,32 +152,6 @@ misc_path=Podatki o popravilu poti CGI? misc_timezone=Vremenski pas PHP misc_charset=Privzeti nabor znakov -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Ročno uredite datoteko $1 log_vars=Spremenjene spremenljivke PHP v $1 log_dirs=Spremenjene nastavitve imenika v $1 @@ -187,7 +161,6 @@ log_safe=Spremenjene možnosti varnega načina v $1 log_limits=Spremenjene omejitve virov v $1 log_errors=Spremenjena napaka pri prijavi v $1 log_misc=Spremenjene druge nastavitve v $1 -log_mods=Updated enabled modules in $1 acl_global=Ali lahko uredite globalno konfiguracijo PHP? acl_anyfile=Ali lahko uredite katero koli datoteko kot konfiguracijo PHP? diff --git a/phpini/lang/sv.auto b/phpini/lang/sv.auto index e28e7223e..ef7f210a8 100644 --- a/phpini/lang/sv.auto +++ b/phpini/lang/sv.auto @@ -152,32 +152,6 @@ misc_path=CGI Fix Path Info? misc_timezone=PHP-tidszon misc_charset=Standardteckenuppsättning -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Redigera filen $1 manuellt log_vars=Ändrade PHP-variabler i $1 log_dirs=Ändrade kataloginställningar i $1 @@ -187,7 +161,6 @@ log_safe=Ändrade alternativ för säkert läge i $1 log_limits=Ändrade resursgränser i $1 log_errors=Ändrad felinloggning i $1 log_misc=Ändrade andra inställningar i $1 -log_mods=Updated enabled modules in $1 acl_global=Kan redigera global PHP-konfiguration? acl_anyfile=Kan redigera vilken fil som helst som en PHP-konfiguration? diff --git a/phpini/lang/th.auto b/phpini/lang/th.auto index 4cde567bb..a4d250405 100644 --- a/phpini/lang/th.auto +++ b/phpini/lang/th.auto @@ -152,32 +152,6 @@ misc_path=ข้อมูลเส้นทาง CGI Fix? misc_timezone=PHP เขตเวลา misc_charset=ชุดอักขระเริ่มต้น -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=แก้ไขไฟล์ $1 ด้วยตนเอง log_vars=เปลี่ยนตัวแปร PHP ใน $1 log_dirs=เปลี่ยนการตั้งค่าไดเรกทอรีใน $1 @@ -187,7 +161,6 @@ log_safe=เปลี่ยนตัวเลือกเซฟโหมดใ log_limits=เปลี่ยนขีด จำกัด ทรัพยากรใน $1 log_errors=เปลี่ยนข้อผิดพลาดการเข้าสู่ระบบใน $1 log_misc=เปลี่ยนการตั้งค่าอื่น ๆ ใน $1 -log_mods=Updated enabled modules in $1 acl_global=สามารถแก้ไขการกำหนดค่า PHP ทั่วโลกได้หรือไม่ acl_anyfile=สามารถแก้ไขไฟล์ใด ๆ เป็นการกำหนดค่า PHP ได้หรือไม่? diff --git a/phpini/lang/tr.auto b/phpini/lang/tr.auto index 649f452ac..ec4e5129e 100644 --- a/phpini/lang/tr.auto +++ b/phpini/lang/tr.auto @@ -152,32 +152,6 @@ misc_path=CGI Yol Bilgisi Fix? misc_timezone=PHP Saat Dilimi misc_charset=Varsayılan karakter seti -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=$1 dosyasını el ile düzenleme log_vars=$1 içindeki PHP değişkenleri değişti log_dirs=$1 dizin ayarları değiştirildi @@ -187,7 +161,6 @@ log_safe=$1 içindeki güvenli mod seçenekleri değiştirildi log_limits=$1 içinde değişen kaynak sınırları log_errors=$1 uygulamasında hata günlüğü değiştirildi log_misc=$1 içindeki diğer ayarlar değişti -log_mods=Updated enabled modules in $1 acl_global=Genel PHP yapılandırmasını düzenleyebilir mi? acl_anyfile=Herhangi bir dosyayı PHP yapılandırması olarak düzenleyebilir mi? diff --git a/phpini/lang/uk.auto b/phpini/lang/uk.auto index 7dc38fc8d..224ae490f 100644 --- a/phpini/lang/uk.auto +++ b/phpini/lang/uk.auto @@ -152,32 +152,6 @@ misc_path=Інформація про виправлений шлях CGI? misc_timezone=Часовий пояс PHP misc_charset=Набір символів за замовчуванням -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Файл $1 редагуйте вручну log_vars=Змінено змінні PHP у $1 log_dirs=Змінено налаштування каталогу в $1 @@ -187,7 +161,6 @@ log_safe=Змінено параметри безпечного режиму в log_limits=Змінено обмеження ресурсів у $1 log_errors=Змінено реєстрацію помилок у $1 log_misc=Змінено інші налаштування в $1 -log_mods=Updated enabled modules in $1 acl_global=Чи можна редагувати глобальну конфігурацію PHP? acl_anyfile=Чи можна редагувати будь-який файл як конфігурацію PHP? diff --git a/phpini/lang/ur.auto b/phpini/lang/ur.auto index 2d219f5f6..ab9df0d10 100644 --- a/phpini/lang/ur.auto +++ b/phpini/lang/ur.auto @@ -152,32 +152,6 @@ misc_path=سی جی آئی فکس پاتھ انفو؟ misc_timezone=پی ایچ پی ٹائم زون misc_charset=ڈیفالٹ کیریکٹر سیٹ -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=دستی طور پر فائل$1 میں ترمیم کریں log_vars=پی ایچ پی متغیرات کو$1 میں تبدیل کردیا log_dirs=$1 میں ڈائریکٹری کی ترتیبات تبدیل کردی گئیں @@ -187,7 +161,6 @@ log_safe=$1 میں محفوظ موڈ کے اختیارات تبدیل کردیئ log_limits=$1 میں وسائل کی حدیں تبدیل کردی گئیں log_errors=لاگ ان کرنے میں بدلاؤ$1 log_misc=$1 میں دوسری ترتیبات تبدیل کردی گئیں -log_mods=Updated enabled modules in $1 acl_global=کیا عالمی پی ایچ پی کی تشکیل میں ترمیم کی جاسکتی ہے؟ acl_anyfile=کسی بھی فائل کو پی ایچ پی کی تشکیل کے بطور ترمیم کرسکتے ہیں؟ diff --git a/phpini/lang/vi.auto b/phpini/lang/vi.auto index d5e6461fc..c8b9522ea 100644 --- a/phpini/lang/vi.auto +++ b/phpini/lang/vi.auto @@ -152,32 +152,6 @@ misc_path=CGI Sửa thông tin đường dẫn? misc_timezone=Múi giờ PHP misc_charset=Bộ ký tự mặc định -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=Chỉnh sửa thủ công tệp $1 log_vars=Các biến PHP đã thay đổi trong $1 log_dirs=Thay đổi cài đặt thư mục trong $1 @@ -187,7 +161,6 @@ log_safe=Thay đổi tùy chọn chế độ an toàn trong $1 log_limits=Thay đổi giới hạn tài nguyên trong $1 log_errors=Đã thay đổi đăng nhập lỗi trong $1 log_misc=Đã thay đổi cài đặt khác trong $1 -log_mods=Updated enabled modules in $1 acl_global=Có thể chỉnh sửa cấu hình PHP toàn cầu? acl_anyfile=Có thể chỉnh sửa bất kỳ tập tin như một cấu hình PHP? diff --git a/phpini/lang/zh.auto b/phpini/lang/zh.auto index bfba55eee..5f362bb5d 100644 --- a/phpini/lang/zh.auto +++ b/phpini/lang/zh.auto @@ -152,32 +152,6 @@ misc_path=CGI修复路径信息？ misc_timezone=PHP时区 misc_charset=默认字符集 -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=手动编辑文件 $1 log_vars=已更改 $1中的PHP变量 log_dirs=已更改 $1中的目录设置 @@ -187,7 +161,6 @@ log_safe=已更改 $1中的安全模式选项 log_limits=已更改 $1中的资源限制 log_errors=已更改 $1中的错误记录 log_misc=更改了 $1中的其他设置 -log_mods=Updated enabled modules in $1 acl_global=可以编辑全局PHP配置吗？ acl_anyfile=可以将任何文件作为PHP配置进行编辑吗？ diff --git a/phpini/lang/zh_TW.auto b/phpini/lang/zh_TW.auto index b13ad739a..4db5a31bd 100644 --- a/phpini/lang/zh_TW.auto +++ b/phpini/lang/zh_TW.auto @@ -152,32 +152,6 @@ misc_path=CGI修復路徑信息？ misc_timezone=PHP時區 misc_charset=默認字符集 -disable_title=Disabled Features -disable_header=Disabled PHP functions and features -disable_funcs=Disabled functions -disable_exec=exec (Execute command) -disable_passthru=passthru (Execute command and display output) -disable_shell_exec=shell_exec (Execute command via shell) -disable_system=system (Execute command and display output) -disable_proc_open=proc_open (Execute command and capture input and output) -disable_popen=popen (Open pipe to executed command) -disable_curl_exec=curl_exec (Execute a URL download session) -disable_curl_multi_exec=curl_multi_exec (Execute multiple URL download sessions) -disable_parse_ini_file=parse_ini_file (Read PHP INI file) -disable_show_source=show_source (Output file with PHP syntax highlighting) -disable_mail=mail (Send email) -disable_leftover=Other functions: -disable_err=Failed to save disabled features -disable_classes=Disabled built-in classes - -mods_title=PHP Modules -mods_edir=Could not find PHP modules directory! -mods_ecannot=You are not allowed to edit enabled PHP modules -mods_desc=This page can be used to globally enable and disable PHP modules for all users on this system. -mods_enabled=Enabled? -mods_name=Module name -mods_file=Config file - log_manual=手動編輯文件 $1 log_vars=已更改 $1中的PHP變量 log_dirs=已更改 $1中的目錄設置 @@ -187,7 +161,6 @@ log_safe=已更改 $1中的安全模式選項 log_limits=已更改 $1中的資源限制 log_errors=已更改 $1中的錯誤記錄 log_misc=更改了 $1中的其他設置 -log_mods=Updated enabled modules in $1 acl_global=可以編輯全局PHP配置嗎？ acl_anyfile=可以將任何文件作為PHP配置進行編輯嗎？ diff --git a/postfix/lang/af.auto b/postfix/lang/af.auto index ab2eca6f8..f32f61e0d 100644 --- a/postfix/lang/af.auto +++ b/postfix/lang/af.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Standaard (voorsien deur die stelsel) opts_myhostname=Internet gasheernaam van hierdie posstelsel opts_myhostname_default=Standaard (voorsien deur die stelsel) opts_mynetworks=Plaaslike netwerke +opts_mynetworks_default=Standaard (alle aangehegte netwerke) opts_mynetworks_style=Outomatiese plaaslike netwerke opts_mynetworks_subnet=Dieselfde IP-subnet opts_mynetworks_class=Dieselfde netwerkklas @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Uittreksel wag op antwoord op DATA opts_smtp_data_xfer_timeout=Uittreksel wag vir antwoord op die oordrag van die boodskapinhoud opts_smtp_data_done_timeout=Time-out om te wag vir antwoord tot einde "." opts_smtp_quit_timeout=Uittreksel wag vir antwoord op QUIT +opts_smtp_use_tls=Gebruik TLS vir SMTP-verbindings opts_smtp_sasl_security_options=SASL sekuriteitsopsies opts_smtp_tls_security_level=SMTP TLS kliënt sekuriteit vlak -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Afleweringstariewe rate_ecannot=U mag die opsies vir afleweringskoerse nie verander nie @@ -461,8 +458,6 @@ acl_postfinger=Kan die opstelling van die postfix nagegaan word? acl_manual=Kan die konfigurasie-lêer gewysig word? acl_dir=Toegestane gids vir kaartlêers acl_bcc=Kan BCC-kartering verander? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Gebruiker se posbusse boxes_user=gebruiker @@ -512,15 +507,6 @@ mail_forward=vorentoe mail_rfc=Van lyn af mail_move=Skuif na: mail_eexists=Boodskap bestaan nie meer nie! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Lees e-pos view_desc=Boodskap $1 in $2 @@ -631,11 +617,9 @@ mailq_active=aktiewe mailq_deferred=uitgestel mailq_hold=Hou gekies mailq_unhold=Ontsluit gekies -mailq_dir=Queue state flushq_title=Spoel tou flushq_desc=Die poging tot die aflewering van e-pos met die opdrag $1 gedwing .. -flushq_desc2=.. check the mail log for results qview_title=Boodskap in die ry qview_desc=Vanaf lêer $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Hanteer SMTP-kliënte wat nie voldoen nie? sasl_opts=SMTP-sekuriteitsopsies sasl_noanonymous=Verwerp anonieme aanmeldings sasl_noplaintext=Verwerp gewone teks-aanmeldings -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Kliënte uitstel met mislukte aanmeldings? sasl_recip=SMTP-ontvangerbeperkings sasl_relay=SMTP-aflosbeperkings diff --git a/postfix/lang/ar.auto b/postfix/lang/ar.auto index 84dde32fe..42389fe47 100644 --- a/postfix/lang/ar.auto +++ b/postfix/lang/ar.auto @@ -245,6 +245,7 @@ opts_mydomain_default=الافتراضي (يوفره النظام) opts_myhostname=اسم مضيف الإنترنت لنظام البريد هذا opts_myhostname_default=الافتراضي (يوفره النظام) opts_mynetworks=الشبكات المحلية +opts_mynetworks_default=الافتراضي (جميع الشبكات المرفقة) opts_mynetworks_style=الشبكات المحلية التلقائية opts_mynetworks_subnet=نفس شبكة IP opts_mynetworks_class=نفس فئة الشبكة @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=مهلة في انتظار الإجابة على ا opts_smtp_data_xfer_timeout=مهلة في انتظار الإجابة لنقل محتوى الرسالة opts_smtp_data_done_timeout=مهلة في انتظار الإجابة على الإنهاء "." opts_smtp_quit_timeout=مهلة في انتظار الإجابة على QUIT +opts_smtp_use_tls=استخدم TLS لاتصالات SMTP opts_smtp_sasl_security_options=خيارات الأمان SASL opts_smtp_tls_security_level=مستوى أمان عميل SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=معدلات التسليم rate_ecannot=غير مسموح لك بتحرير خيارات معدلات التسليم @@ -461,8 +458,6 @@ acl_postfinger=يمكن التحقق من التكوين postfix؟ acl_manual=يمكن تحرير ملف التكوين؟ acl_dir=الدليل المسموح به لملفات الخريطة acl_bcc=يمكن تعديل تعيين BCC؟ -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=صناديق بريد المستخدم boxes_user=المستعمل @@ -512,15 +507,6 @@ mail_forward=إلى الأمام mail_rfc=من الخط mail_move=الانتقال إلى: mail_eexists=الرسالة لم تعد موجودة! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=قراءة البريد الإلكتروني view_desc=Message $1 in $2 @@ -631,11 +617,9 @@ mailq_active=نشيط mailq_deferred=المؤجلة mailq_hold=عقد مختارة mailq_unhold=إلغاء الحجز المحدد -mailq_dir=Queue state flushq_title=قائمة الانتظار فلوش flushq_desc=Forcing the attempted delivery of mail with the command $1 .. -flushq_desc2=.. check the mail log for results qview_title=رسالة في قائمة الانتظار qview_desc=From file $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=التعامل مع عملاء SMTP غير متو sasl_opts=خيارات أمان SMTP sasl_noanonymous=رفض تسجيلات الدخول المجهولة sasl_noplaintext=رفض تسجيلات النص العادي -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=تأخير العملاء مع تسجيلات الدخول الفاشلة؟ sasl_recip=قيود مستلم SMTP sasl_relay=قيود ترحيل SMTP diff --git a/postfix/lang/be.auto b/postfix/lang/be.auto index 98379fcc9..6645ce130 100644 --- a/postfix/lang/be.auto +++ b/postfix/lang/be.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Па змаўчанні (прадастаўляецца с opts_myhostname=Імя хаста гэтай паштовай сістэмы opts_myhostname_default=Па змаўчанні (прадастаўляецца сістэмай) opts_mynetworks=Лакальныя сеткі +opts_mynetworks_default=Па змаўчанні (усе далучаныя сеткі) opts_mynetworks_style=Аўтаматычныя лакальныя сеткі opts_mynetworks_subnet=Тая ж падсетка IP opts_mynetworks_class=Той жа сеткавы клас @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Час чакання чакання адказу н opts_smtp_data_xfer_timeout=Час чакання чакання адказу на перадачу змесціва паведамлення opts_smtp_data_done_timeout=Час чакання чакання адказу скончыцца ". opts_smtp_quit_timeout=Час чакання адказу на пытанне QUIT +opts_smtp_use_tls=Выкарыстоўвайце TLS для падлучэння SMTP opts_smtp_sasl_security_options=Варыянты бяспекі SASL opts_smtp_tls_security_level=Узровень бяспекі кліента SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Стаўкі дастаўкі rate_ecannot=Вам не дазволена рэдагаваць параметры тарыфаў дастаўкі @@ -461,8 +458,6 @@ acl_postfinger=Ці можна праверыць канфігурацыю по acl_manual=Ці можаце рэдагаваць канфігурацыйны файл? acl_dir=Дазволены каталог для файлаў карт acl_bcc=Ці можна рэдагаваць адлюстраванне BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Паштовыя скрыні карыстальніка boxes_user=Карыстальнік @@ -512,15 +507,6 @@ mail_forward=Наперад mail_rfc=З радка mail_move=Перайсці да: mail_eexists=Паведамлення больш не існуе! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Чытайце электронную пошту view_desc=Паведамленне $1 у $2 @@ -631,11 +617,9 @@ mailq_active=Актыўны mailq_deferred=Адкладзены mailq_hold=Утрымлівайце абранае mailq_unhold=Адцягнуць абранае -mailq_dir=Queue state flushq_title=Чарга прамывання flushq_desc=Прымусовая спроба дастаўкі пошты з дапамогай каманды $1. -flushq_desc2=.. check the mail log for results qview_title=Паведамленне ў чарзе qview_desc=З файла $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Звяртацца з несумяшчальным sasl_opts=Параметры бяспекі SMTP sasl_noanonymous=Адхіліць ананімныя ўваходы sasl_noplaintext=Адхіліць звычайныя тэксты -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Затрымка кліентаў з памылкай уваходу? sasl_recip=Абмежаванні атрымальніка SMTP sasl_relay=Абмежаванні рэле SMTP diff --git a/postfix/lang/bg b/postfix/lang/bg index 134c859a7..3cad6cafa 100644 --- a/postfix/lang/bg +++ b/postfix/lang/bg @@ -244,6 +244,7 @@ opts_mydomain_default=Подразбиращо се (получено от си opts_myhostname=Име на Интернет хоста на тази пощенска система opts_myhostname_default=Подразбиращо се (получено от системата) opts_mynetworks=Локални мрежи +opts_mynetworks_default=Подразбиращо се (всички свързани мрежи) opts_mynetworks_style=Автоматично за локални мрежи opts_mynetworks_subnet=Същата IP подмрежа opts_mynetworks_class=Същият клас мрежи @@ -312,6 +313,7 @@ opts_smtp_data_init_timeout=Таймаут при изчакване на отг opts_smtp_data_xfer_timeout=Таймаут при изчакване на отговор на предаването на съдържанието на съобщение opts_smtp_data_done_timeout=Таймаут при изчакване на отговор на приключващата "." opts_smtp_quit_timeout=Таймаут при изчакване на отговор на QUIT +opts_smtp_use_tls=Използвай TLS за SMTP връзки opts_smtp_sasl_security_options=Опции за сигурност на SASL rate_title=Брой доставяния за време diff --git a/postfix/lang/bg.auto b/postfix/lang/bg.auto index 9d67b8312..d4669c64c 100644 --- a/postfix/lang/bg.auto +++ b/postfix/lang/bg.auto @@ -3,11 +3,6 @@ opts_resolve_dequoted_address=Да се предотврати използва opts_smtpd_discard_ehlo_keywords=SMTP EHLO ключови думи, които да не се изпращат opts_smtp_tls_security_level=SMTP TLS ниво на сигурност на клиента -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols mapping_toomany=Има $1 записи на картата, което е над ограничението за показване на $2. mapping_find=Показване на съвпадения: @@ -22,26 +17,11 @@ sni_dom=Име на хост sni_certs=Файлове със сертификати acl_sni=Може ли да редактирате сертификати? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? - -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_aname=Прикачен файл mailq_deleteall=Изчистване на опашката за поща mailq_deletealldesc=Кликнете върху този бутон, за да изтриете всички съобщения от опашката за поща. -mailq_dir=Queue state - -flushq_desc2=.. check the mail log for results opts_mime_header_checks=Таблици за проверка на MIME заглавки opts_header_checks_no_map=(В момента не е дефинирана карта за проверка на заглавка. Първо дефинирайте карта, след което можете да я редактирате) @@ -50,10 +30,6 @@ opts_mime_header_checks_no_map=(В момента не е дефинирана log_sni=Променете опциите за картографиране на сертификати -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtp_enforce_tls=Искате ли TLS криптиране? sasl_level_dane=Възможности DANE TLS sasl_level_dane_only=Задължително DANE TLS diff --git a/postfix/lang/ca b/postfix/lang/ca index 2f9224767..7440339dc 100644 --- a/postfix/lang/ca +++ b/postfix/lang/ca @@ -244,6 +244,7 @@ opts_mydomain_default=Defecte (donat pel sistema) opts_myhostname=Nom de host Internet d'aquest sistema de correu opts_myhostname_default=Defecte (donat pel sistema) opts_mynetworks=Xarxes locals +opts_mynetworks_default=Defecte (totes les xarxes connectades) opts_mynetworks_style=Xarxes locals automàtiques opts_mynetworks_subnet=La mateixa subxarxa IP opts_mynetworks_class=La mateixa classe de xarxa @@ -311,6 +312,7 @@ opts_smtp_data_init_timeout=Temps límit d'espera de la resposta a DATA opts_smtp_data_xfer_timeout=Temps límit d'espera de la resposta a la transmissió del contingut del missatge opts_smtp_data_done_timeout=Temps límit d'espera de la resposta a "." final opts_smtp_quit_timeout=Temps límit d'espera de la resposta a QUIT +opts_smtp_use_tls=Utilitza TLS per a les connexions SMTP opts_smtp_sasl_security_options=Opcions de seguretat SASL rate_title=Ritmes de Lliurament diff --git a/postfix/lang/ca.auto b/postfix/lang/ca.auto index b3c054c65..ae44fb247 100644 --- a/postfix/lang/ca.auto +++ b/postfix/lang/ca.auto @@ -5,11 +5,6 @@ opts_delay_warning_time_default2=Per defecte del correfoc opts_smtpd_discard_ehlo_keywords=Paraules clau SMTP EHLO per no enviar opts_smtp_tls_security_level=Nivell de seguretat del client SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols mapping_toomany=Hi ha $1 entrades de mapa, que es troba per sobre del límit de visualització de $2. mapping_find=Mostra els mapatges que coincideixen: @@ -24,25 +19,9 @@ sni_dom=Nom de l'amfitrió sni_certs=Fitxers de certificats acl_sni=Es poden editar certificats? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? - -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_aname=Adjunt -mailq_dir=Queue state - -flushq_desc2=.. check the mail log for results - after_err=Error de configuració de correcció posterior : $1 opts_mime_header_checks=Taules de comprovació de capçaleres MIME @@ -52,9 +31,4 @@ opts_mime_header_checks_no_map=(Actualment no s'ha definit cap mapa de comprovac log_sni=Canvieu les opcions de mapatge de certificats -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication - mysql_ecfile2=No s'ha pogut trobar la taula al fitxer de configuració de MySQL $1 diff --git a/postfix/lang/cs b/postfix/lang/cs index 27c8037d1..8e7dc22d0 100644 --- a/postfix/lang/cs +++ b/postfix/lang/cs @@ -137,6 +137,7 @@ opts_mydomain_default=Výchozí (provedeno systémem) opts_myhostname=Jméno internet hosta tohoto mail systému opts_myhostname_default=Výchozí (provedeno systémem) opts_mynetworks=Lokální sítě +opts_mynetworks_default=Výchozí (všechny připojené sítě) opts_bounce_notice_recipient=Odeslat postmasterovi oznámení o odskočení k... opts_2bounce_notice_recipient=Odeslat postmasterovi oznámení o druhém odskočení k... opts_delay_notice_recipient=Odeslat postmasterovi oznámení o pozdržení k... diff --git a/postfix/lang/cs.auto b/postfix/lang/cs.auto index faff3b2d7..90f06adaf 100644 --- a/postfix/lang/cs.auto +++ b/postfix/lang/cs.auto @@ -129,13 +129,9 @@ smtpd_nomap2=Dosud nebyla zadána žádná mapa pro omezení adres odesílatele. smtpd_map=Povolené adresy pro předávání smtpd_map2=Omezení adres odesílatele +opts_smtp_use_tls=Pro připojení SMTP použijte TLS opts_smtp_sasl_security_options=Možnosti zabezpečení SASL opts_smtp_tls_security_level=Úroveň zabezpečení klienta SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols opts_edebug=Chybějící nebo neplatná úroveň podrobného protokolování - musí být číslo větší než nula @@ -188,20 +184,9 @@ acl_postfinger=Lze zkontrolovat konfiguraci postfixu? acl_manual=Lze upravit konfigurační soubor? acl_dir=Povolený adresář pro soubory mapy acl_bcc=Lze upravit mapování BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? mail_move=Přesunout do: mail_eexists=Zpráva již neexistuje! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_flush=Vyplachování view_body=Text zprávy @@ -244,11 +229,9 @@ mailq_active=Aktivní mailq_deferred=Odložený mailq_hold=Vybrat mailq_unhold=Un-Hold Selected -mailq_dir=Queue state flushq_title=Flush Queue flushq_desc=Vynucení pokusu o doručení pošty příkazem $1 .. -flushq_desc2=.. check the mail log for results qview_title=Zpráva ve frontě qview_desc=Ze souboru $1 @@ -456,10 +439,6 @@ opts_broken_sasl_auth_clients=Manipulace s klienty SMTP, kteří nejsou v soulad sasl_opts=Možnosti zabezpečení SMTP sasl_noanonymous=Odmítnout anonymní přihlášení sasl_noplaintext=Odmítnout přihlašování prostého textu -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Zpoždění klientů při neúspěšných přihlášeních? sasl_recip=Omezení příjemce SMTP sasl_relay=Omezení relé SMTP diff --git a/postfix/lang/da.auto b/postfix/lang/da.auto index 35a8c4099..faf799f54 100644 --- a/postfix/lang/da.auto +++ b/postfix/lang/da.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Standard (leveret af systemet) opts_myhostname=Internet-hostnavn for dette postsystem opts_myhostname_default=Standard (leveret af systemet) opts_mynetworks=Lokale netværk +opts_mynetworks_default=Standard (alle tilknyttede netværk) opts_mynetworks_style=Automatiske lokale netværk opts_mynetworks_subnet=Samme IP-undernet opts_mynetworks_class=Samme netværksklasse @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Timeout på venter på svar på DATA opts_smtp_data_xfer_timeout=Timeout på venter på svar til transmission af meddelelsesindhold opts_smtp_data_done_timeout=Timeout for at vente på svar til slutning "." opts_smtp_quit_timeout=Timeout for at vente på svar på QUIT +opts_smtp_use_tls=Brug TLS til SMTP-forbindelser opts_smtp_sasl_security_options=SASL sikkerhedsindstillinger opts_smtp_tls_security_level=SMTP TLS klient sikkerhedsniveau -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Leveringspriser rate_ecannot=Du har ikke tilladelse til at redigere indstillingerne for leveringspriser @@ -461,8 +458,6 @@ acl_postfinger=Kan kontrollere konfiguration af postfix? acl_manual=Kan redigere konfigurationsfil? acl_dir=Tilladt bibliotek til kortfiler acl_bcc=Kan redigere BCC-kortlægning? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Brugerpostkasser boxes_user=Bruger @@ -512,15 +507,6 @@ mail_forward=Frem mail_rfc=Fra linje mail_move=Flytte til: mail_eexists=Beskeden findes ikke længere! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Læs e-mail view_desc=Meddelelse $1 i $2 @@ -631,11 +617,9 @@ mailq_active=Aktiv mailq_deferred=udskudt mailq_hold=Hold markeret mailq_unhold=Fjern markering markeret -mailq_dir=Queue state flushq_title=Flush Queue flushq_desc=Tvinger den forsøgte levering af mail med kommandoen $1 .. -flushq_desc2=.. check the mail log for results qview_title=Meddelelse i kø qview_desc=Fra fil $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Håndterer du ikke-kompatible SMTP-klienter? sasl_opts=SMTP-sikkerhedsindstillinger sasl_noanonymous=Afvis anonyme login sasl_noplaintext=Afvis almindelig tekst-logins -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Vil du udsætte klienter med mislykkede login? sasl_recip=SMTP-modtagerbegrænsninger sasl_relay=SMTP-relæbegrænsninger diff --git a/postfix/lang/de b/postfix/lang/de index 7557c0901..22edb44a5 100644 --- a/postfix/lang/de +++ b/postfix/lang/de @@ -982,4 +982,4 @@ opts_recipient_bcc_maps=Nachschlagetabellen für Empfänger-BCC-Zuordnungen bcc_sender=Absenderzuordnungen bcc_recipient=Empfängerzuordnungen bcc_senderdesc=Die Absender-BCC-Zuordnungen definieren eine zusätzliche E-Mail-Adresse, an die die Post von den angegebenen Adressen oder Domains weitergeleitet wird. -bcc_recipientdesc=Die Empfänger-BCC-Zuordnungen definieren eine zusätzliche E-Mail-Adresse, an die die Post an die angegebenen Adressen oder Domains weitergeleitet wird. +bcc_recipientdesc=Die Empfänger-BCC-Zuordnungen definieren eine zusätzliche E-Mail-Adresse, an die die Post an die angegebenen Adressen oder Domains weitergeleitet wird. \ No newline at end of file diff --git a/postfix/lang/el.auto b/postfix/lang/el.auto index 0d97bbe9f..190a13afe 100644 --- a/postfix/lang/el.auto +++ b/postfix/lang/el.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Προεπιλογή (παρέχεται από το σύ opts_myhostname=Όνομα κεντρικού υπολογιστή στο Internet αυτού του συστήματος αλληλογραφίας opts_myhostname_default=Προεπιλογή (παρέχεται από το σύστημα) opts_mynetworks=Τοπικά δίκτυα +opts_mynetworks_default=Προεπιλογή (όλα τα συνδεδεμένα δίκτυα) opts_mynetworks_style=Αυτόματα τοπικά δίκτυα opts_mynetworks_subnet=Το ίδιο υποδίκτυο IP opts_mynetworks_class=Ίδια τάξη δικτύου @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Χρονικό όριο αναμονής για απ opts_smtp_data_xfer_timeout=Χρονικό όριο αναμονής για απάντηση στη μετάδοση περιεχομένου μηνυμάτων opts_smtp_data_done_timeout=Χρονικό όριο για την αναμονή λήψης απάντησης "." opts_smtp_quit_timeout=Χρονικό όριο αναμονής για απάντηση στο QUIT +opts_smtp_use_tls=Χρησιμοποιήστε TLS για συνδέσεις SMTP opts_smtp_sasl_security_options=Επιλογές ασφαλείας SASL opts_smtp_tls_security_level=Επίπεδο ασφάλειας πελάτη SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Τιμές παράδοσης rate_ecannot=Δεν επιτρέπεται η επεξεργασία των επιλογών των ποσοστών παράδοσης @@ -461,8 +458,6 @@ acl_postfinger=Μπορεί να ελέγξει τη διαμόρφωση postfi acl_manual=Μπορεί να επεξεργαστεί το αρχείο ρυθμίσεων; acl_dir=Επιτρεπόμενος κατάλογος αρχείων χάρτη acl_bcc=Μπορεί να επεξεργαστεί την χαρτογράφηση BCC; -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Γραμματοκιβώτια χρηστών boxes_user=Χρήστης @@ -512,15 +507,6 @@ mail_forward=Προς τα εμπρός mail_rfc=Από τη γραμμή mail_move=Μετακομίζω κάπου: mail_eexists=Το μήνυμα δεν υπάρχει πλέον! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Διαβάστε το μήνυμα ηλεκτρονικού ταχυδρομείου view_desc=Μηνύματα $1 σε $2 @@ -631,11 +617,9 @@ mailq_active=Ενεργός mailq_deferred=Αναβαλλόμενος mailq_hold=Κρατήστε Επιλεγμένο mailq_unhold=Απενεργοποίηση επιλογής -mailq_dir=Queue state flushq_title=Flush Queue flushq_desc=Αναγκάζοντας την απόπειρα παράδοσης αλληλογραφίας με την εντολή $1 .. -flushq_desc2=.. check the mail log for results qview_title=Μήνυμα Queueed qview_desc=Από το αρχείο $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Αντιμετώπιση μη συμμορφούμ sasl_opts=Επιλογές ασφαλείας SMTP sasl_noanonymous=Απόρριψη ανώνυμων συνδέσεων sasl_noplaintext=Απορρίψτε τα αρχεία καταγραφής απλού κειμένου -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Καθυστέρηση πελατών με αποτυχημένες συνδέσεις; sasl_recip=Περιορισμοί παραλήπτη SMTP sasl_relay=Περιορισμοί αναμετάδοσης SMTP diff --git a/postfix/lang/es b/postfix/lang/es index b248386e6..9078bdec7 100644 --- a/postfix/lang/es +++ b/postfix/lang/es @@ -140,6 +140,7 @@ opts_mydomain_default=Por defecto (suministrado por sistema) opts_myhostname=Nombre de máquina de internet de este sistema de correo opts_myhostname_default=Por defecto (suministrada por sistema) opts_mynetworks=Redes locales +opts_mynetworks_default=Por defecto (todas las redes conectadas) opts_bounce_notice_recipient=Enviar aviso a jefe de estafeta al enviar a... opts_2bounce_notice_recipient=Enviar aviso al jefe de estafeta al reenviar a... opts_delay_notice_recipient=Enviar aviso al jefe de estafeta al producirse retraso a... diff --git a/postfix/lang/es.auto b/postfix/lang/es.auto index 2ef31bb90..e4a0a475b 100644 --- a/postfix/lang/es.auto +++ b/postfix/lang/es.auto @@ -125,13 +125,9 @@ smtpd_nomap2=Aún no se ha ingresado un mapa de restricciones en las direcciones smtpd_map=Direcciones permitidas para retransmitir smtpd_map2=Restricciones en las direcciones del remitente +opts_smtp_use_tls=Use TLS para conexiones SMTP opts_smtp_sasl_security_options=Opciones de seguridad de SASL opts_smtp_tls_security_level=Nivel de seguridad del cliente SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols opts_edebug=Nivel de registro detallado faltante o no válido: debe ser un número mayor que cero @@ -185,8 +181,6 @@ acl_postfinger=¿Puede verificar la configuración de postfix? acl_manual=¿Se puede editar el archivo de configuración? acl_dir=Directorio permitido para archivos de mapas acl_bcc=¿Se puede editar el mapeo BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Buzones de usuario boxes_user=Usuario @@ -236,15 +230,6 @@ mail_forward=Adelante mail_rfc=De la línea mail_move=Mover a: mail_eexists=¡El mensaje ya no existe! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Leer el correo electrónico view_desc=Mensaje $1 en $2 @@ -355,11 +340,9 @@ mailq_active=Activo mailq_deferred=Diferido mailq_hold=Mantener seleccionado mailq_unhold=Anular retención seleccionado -mailq_dir=Queue state flushq_title=Cola de descarga flushq_desc=Forzar el intento de entrega de correo con el comando $1 .. -flushq_desc2=.. check the mail log for results qview_title=Mensaje en cola qview_desc=Del archivo $1 @@ -568,10 +551,6 @@ opts_broken_sasl_auth_clients=¿Manejar clientes SMTP no conformes? sasl_opts=Opciones de seguridad SMTP sasl_noanonymous=Rechazar inicios de sesión anónimos sasl_noplaintext=Rechazar inicios de sesión de texto sin formato -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=¿Retrasar clientes con inicios de sesión fallidos? sasl_recip=Restricciones de destinatario SMTP sasl_relay=Restricciones de retransmisión SMTP diff --git a/postfix/lang/eu.auto b/postfix/lang/eu.auto index e487db027..63275f056 100644 --- a/postfix/lang/eu.auto +++ b/postfix/lang/eu.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Lehenetsia (sistemak emandako) opts_myhostname=Posta sistema honen Interneteko ostalariaren izena opts_myhostname_default=Lehenetsia (sistemak emandako) opts_mynetworks=Tokiko sareak +opts_mynetworks_default=Lehenetsia (erantsitako sare guztiak) opts_mynetworks_style=Sare lokal automatikoak opts_mynetworks_subnet=IP azpimarra bera opts_mynetworks_class=Sareko klase bera @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Datuen erantzunaren zain gelditzea opts_smtp_data_xfer_timeout=Erantzun itxarotea itxarotea mezuen edukia transmititzeko opts_smtp_data_done_timeout=Erantzunari amaiera emateko itxaroten duen denbora " opts_smtp_quit_timeout=QUIT erantzunaren zain gelditzea +opts_smtp_use_tls=Erabili TLS SMTP konexioetarako opts_smtp_sasl_security_options=SASL segurtasun aukerak opts_smtp_tls_security_level=SMTP TLS bezeroaren segurtasun maila -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Bidalketa-tasak rate_ecannot=Ezin duzu entrega tasen aukerak editatu @@ -461,8 +458,6 @@ acl_postfinger=Konfigurazio postfixaren konfigurazioa egiaztatu dezakezu? acl_manual=Ezin al duzu konfiguratu fitxategia? acl_dir=Baimendu mapako fitxategien direktorio acl_bcc=Editatu dezakezu BCC mapaketa? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Erabiltzaileen postontziak boxes_user=Erabiltzaileak @@ -512,15 +507,6 @@ mail_forward=Aurrera mail_rfc=Lerrotik mail_move=Mugitu: mail_eexists=Mezua ez da jada! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Irakurri posta elektronikoa view_desc=$1 mezuan $2 @@ -631,11 +617,9 @@ mailq_active=Aktiboak mailq_deferred=Atzeratuta mailq_hold=Mantendu aukeratua mailq_unhold=Ezarri eutsi hautatua -mailq_dir=Queue state flushq_title=Erraza ilara flushq_desc=$1 komandoarekin posta elektronikoa entregatzeko saiakera behartuta .. -flushq_desc2=.. check the mail log for results qview_title=Ilarako mezua qview_desc=$1 fitxategitik @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=SMTP bezeroak betetzen ez diren kudeatzea? sasl_opts=SMTP segurtasun aukerak sasl_noanonymous=Saioa ukatu ezezagunak sasl_noplaintext=Testu arruntaren saioak baztertu -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Bezeroak saioa hastearekin batera atzeratzea? sasl_recip=SMTP hartzaileen murrizketak sasl_relay=SMTP erreleboen murrizketak diff --git a/postfix/lang/fa.auto b/postfix/lang/fa.auto index 2b391301d..97f7b690e 100644 --- a/postfix/lang/fa.auto +++ b/postfix/lang/fa.auto @@ -245,6 +245,7 @@ opts_mydomain_default=پیش فرض (ارائه شده توسط سیستم) opts_myhostname=نام میزبان اینترنت این سیستم نامه پستی opts_myhostname_default=پیش فرض (ارائه شده توسط سیستم) opts_mynetworks=شبکه های محلی +opts_mynetworks_default=پیش فرض (همه شبکه های پیوست) opts_mynetworks_style=شبکه های محلی خودکار opts_mynetworks_subnet=همان زیر شبکه IP opts_mynetworks_class=کلاس شبکه مشابه @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=زمان انتظار برای پاسخ به DATA opts_smtp_data_xfer_timeout=زمان منتظر جواب برای ارسال محتوای پیام opts_smtp_data_done_timeout=اتمام زمان انتظار برای پاسخ به پایان "". opts_smtp_quit_timeout=زمان انتظار برای پاسخ به QUIT +opts_smtp_use_tls=برای اتصالات SMTP از TLS استفاده کنید opts_smtp_sasl_security_options=گزینه های امنیتی SASL opts_smtp_tls_security_level=سطح امنیت کلاینت SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=نرخ تحویل rate_ecannot=شما مجاز به ویرایش گزینه های نرخ تحویل نیستید @@ -461,8 +458,6 @@ acl_postfinger=آیا می توانید پیکربندی postfix را بررسی acl_manual=آیا می توانید پرونده پیکربندی را ویرایش کنید؟ acl_dir=فهرست مجاز برای پرونده های نقشه acl_bcc=آیا می توانید نقشه برداری BCC را ویرایش کنید؟ -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=صندوق های پستی کاربر boxes_user=کاربر @@ -512,15 +507,6 @@ mail_forward=رو به جلو mail_rfc=از خط mail_move=انتقال به: mail_eexists=پیام دیگر وجود ندارد! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=ایمیل را بخوانید view_desc=Message $1 in $2 @@ -631,11 +617,9 @@ mailq_active=فعال mailq_deferred=به تعویق افتاد mailq_hold=انتخاب را نگه دارید mailq_unhold=انتخاب را نگه دارید -mailq_dir=Queue state flushq_title=Flush Queue flushq_desc=Forcing the attempted delivery of mail with the command $1 .. -flushq_desc2=.. check the mail log for results qview_title=پیام صف qview_desc=From file $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=با SMTP سازگار نیستید؟ sasl_opts=گزینه های امنیتی SMTP sasl_noanonymous=ورود به سیستم ناشناس را رد کنید sasl_noplaintext=ورود به متن ساده را رد کنید -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=تأخیر مشتریان را با ورود به سیستم شکست خورده؟ sasl_recip=محدودیت دریافت کننده SMTP sasl_relay=محدودیت رله SMTP diff --git a/postfix/lang/fi.auto b/postfix/lang/fi.auto index 620c4d2aa..94c11cf48 100644 --- a/postfix/lang/fi.auto +++ b/postfix/lang/fi.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Oletus (järjestelmän tarjoaa) opts_myhostname=Tämän sähköpostijärjestelmän Internet-isäntänimi opts_myhostname_default=Oletus (järjestelmän tarjoaa) opts_mynetworks=Paikalliset verkot +opts_mynetworks_default=Oletus (kaikki liitetyt verkot) opts_mynetworks_style=Automaattiset paikallisverkot opts_mynetworks_subnet=Sama IP-aliverkko opts_mynetworks_class=Sama verkkoluokka @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Aikakatkaisu odotettaessa vastausta tietoihin opts_smtp_data_xfer_timeout=Aikakatkaisu odotettaessa vastausta viestin sisällön lähettämiseen opts_smtp_data_done_timeout=Aikakatkaisu odotettaessa vastausta "" loppuun. opts_smtp_quit_timeout=Aikakatkaisu odotettaessa vastausta QUIT +opts_smtp_use_tls=Käytä TLS: tä SMTP-yhteyksiin opts_smtp_sasl_security_options=SASL-tietoturvavaihtoehdot opts_smtp_tls_security_level=SMTP TLS -asiakassuojaustaso -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Toimitushinnat rate_ecannot=Et voi muokata toimitushintoja @@ -461,8 +458,6 @@ acl_postfinger=Voiko tarkistaa postfix-kokoonpanon? acl_manual=Voiko muokata konfigurointitiedostoa? acl_dir=Sallittu hakemisto karttatiedostoille acl_bcc=Voiko BCC-kartoitusta muokata? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Käyttäjän postilaatikot boxes_user=käyttäjä @@ -512,15 +507,6 @@ mail_forward=Eteenpäin mail_rfc=Linjalta mail_move=Muuttaa: mail_eexists=Viestiä ei enää ole! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Lue sähköposti view_desc=Viesti $1 $2 @@ -631,11 +617,9 @@ mailq_active=aktiivinen mailq_deferred=Laskennalliset mailq_hold=Pidä valittuna mailq_unhold=Poista pito valittuna -mailq_dir=Queue state flushq_title=Huuhtelujono flushq_desc=Postitusyrityksen pakottaminen komennolla $1 .. -flushq_desc2=.. check the mail log for results qview_title=Jonossa oleva viesti qview_desc=Tiedostosta $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Käsitellä vaatimustenvastaisia SMTP-asiakkaita? sasl_opts=SMTP-suojausasetukset sasl_noanonymous=Hylkää tuntemattomia kirjautumisia sasl_noplaintext=Hylkää selkeät tekstitunnukset -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Viivästytkö asiakkaita, joilla kirjautuminen epäonnistui? sasl_recip=SMTP-vastaanottajan rajoitukset sasl_relay=SMTP-relerajoitukset diff --git a/postfix/lang/fr b/postfix/lang/fr index 41adf29d3..79d9bdc98 100644 --- a/postfix/lang/fr +++ b/postfix/lang/fr @@ -168,6 +168,7 @@ opts_mydomain_default=Défaut (donné par le système) opts_myhostname=Nom de machine (hostname) de ce système opts_myhostname_default=Défaut (donné par le système) opts_mynetworks=Réseaux locaux +opts_mynetworks_default=Défaut (tous les réseaux trouvés) opts_bounce_notice_recipient=Envoyer l'information de rebond (bounce) à... opts_2bounce_notice_recipient=Envoyer l'information de rebond2 (2bounce) à... opts_delay_notice_recipient=Envoyer l'information de temporisation (delay) à... diff --git a/postfix/lang/fr.auto b/postfix/lang/fr.auto index 899b067f8..f405e53d7 100644 --- a/postfix/lang/fr.auto +++ b/postfix/lang/fr.auto @@ -101,13 +101,9 @@ smtpd_nomap2=Aucune carte pour les restrictions sur les adresses des expéditeur smtpd_map=Adresses autorisées pour le relais smtpd_map2=Restrictions sur les adresses des expéditeurs +opts_smtp_use_tls=Utiliser TLS pour les connexions SMTP opts_smtp_sasl_security_options=Options de sécurité SASL opts_smtp_tls_security_level=Niveau de sécurité du client SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols opts_edebug=Niveau de journalisation détaillé manquant ou non valide - doit être un nombre supérieur à zéro @@ -155,8 +151,6 @@ acl_mailq=Peut gérer la file d'attente de messagerie? acl_boxes=Peut lire les courriels des utilisateurs? acl_dir=Répertoire autorisé pour les fichiers de carte acl_bcc=Peut modifier le mappage BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_user=Utilisateur boxes_size=Taille de la boîte aux lettres @@ -205,15 +199,6 @@ mail_forward=Vers l'avant mail_rfc=De la ligne mail_move=Déménager à: mail_eexists=Le message n'existe plus! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_sent=Message $1 dans la liste de diffusion envoyée view_qdesc=Message en file d'attente $1 @@ -303,11 +288,9 @@ mailq_active=actif mailq_deferred=Différé mailq_hold=Conserver la sélection mailq_unhold=Retenir la sélection -mailq_dir=Queue state flushq_title=Queue de vidage flushq_desc=Forcer la tentative de remise du courrier avec la commande $1 .. -flushq_desc2=.. check the mail log for results qview_title=Message en file d'attente qview_desc=À partir du fichier $1 @@ -513,10 +496,6 @@ opts_broken_sasl_auth_clients=Gérer les clients SMTP non conformes? sasl_opts=Options de sécurité SMTP sasl_noanonymous=Refuser les connexions anonymes sasl_noplaintext=Refuser les connexions en texte brut -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Retarder les clients dont les connexions ont échoué? sasl_recip=Restrictions du destinataire SMTP sasl_relay=Restrictions de relais SMTP diff --git a/postfix/lang/he.auto b/postfix/lang/he.auto index 83ff3f004..3afdbc438 100644 --- a/postfix/lang/he.auto +++ b/postfix/lang/he.auto @@ -245,6 +245,7 @@ opts_mydomain_default=ברירת מחדל (מסופקת על ידי המערכת opts_myhostname=שם מארח אינטרנט של מערכת דואר זו opts_myhostname_default=ברירת מחדל (מסופקת על ידי המערכת) opts_mynetworks=רשתות מקומיות +opts_mynetworks_default=ברירת מחדל (כל הרשתות המצורפות) opts_mynetworks_style=רשתות מקומיות אוטומטיות opts_mynetworks_subnet=אותה רשת משנה IP opts_mynetworks_class=אותה כיתת רשת @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=פסק זמן בהמתנה לתשובה ל- DATA opts_smtp_data_xfer_timeout=פסק זמן בהמתנה לתשובה להעברת תוכן הודעה opts_smtp_data_done_timeout=פסק זמן בהמתנה לתשובה לסיום "." opts_smtp_quit_timeout=פסק זמן בהמתנה לתשובה ל- QUIT +opts_smtp_use_tls=השתמש ב- TLS לחיבורי SMTP opts_smtp_sasl_security_options=אפשרויות אבטחה של SASL opts_smtp_tls_security_level=רמת אבטחת לקוח SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=שיעורי משלוח rate_ecannot=אינך רשאי לערוך את אפשרויות תעריפי המסירה @@ -461,8 +458,6 @@ acl_postfinger=האם ניתן לבדוק את תצורת הפוסטפיקס? acl_manual=האם ניתן לערוך קובץ config? acl_dir=מדריך מורשה לקבצי מפות acl_bcc=האם ניתן לערוך מיפוי BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=תיבות דואר של משתמשים boxes_user=משתמש @@ -512,15 +507,6 @@ mail_forward=קדימה mail_rfc=מקו mail_move=לעבור ל: mail_eexists=ההודעה כבר לא קיימת! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=קרא דוא"ל view_desc=Message $1 in $2 @@ -631,11 +617,9 @@ mailq_active=פעיל mailq_deferred=נדחה mailq_hold=החזק את הנבחר mailq_unhold=בחרו בביטול ההמתנה -mailq_dir=Queue state flushq_title=תור סומק flushq_desc=Forcing the attempted delivery of mail with the command $1 .. -flushq_desc2=.. check the mail log for results qview_title=הודעה בתור qview_desc=From file $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=לטפל בלקוחות SMTP שאינם תואמי sasl_opts=אפשרויות אבטחה SMTP sasl_noanonymous=דחה כניסות אנונימיות sasl_noplaintext=דחה כניסות לטקסט רגיל -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=לעכב לקוחות עם כניסות כושלות? sasl_recip=מגבלות של נמען SMTP sasl_relay=מגבלות ממסר SMTP diff --git a/postfix/lang/hr.auto b/postfix/lang/hr.auto index d6450bbf5..eaedae8af 100644 --- a/postfix/lang/hr.auto +++ b/postfix/lang/hr.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Zadano (pruža sustav) opts_myhostname=Internetsko ime domaćina ovog poštanskog sustava opts_myhostname_default=Zadano (pruža sustav) opts_mynetworks=Lokalne mreže +opts_mynetworks_default=Zadano (sve priključene mreže) opts_mynetworks_style=Automatske lokalne mreže opts_mynetworks_subnet=Ista IP podmreža opts_mynetworks_class=Ista mrežna klasa @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Istek vremena čekanja na odgovor na DATA opts_smtp_data_xfer_timeout=Istek vremena čekanja na odgovor za prijenos sadržaja poruke opts_smtp_data_done_timeout=Vrijeme čekanja na čekanje odgovora do kraja ". opts_smtp_quit_timeout=Istek vremena čekanja na odgovor na QUIT +opts_smtp_use_tls=Koristite TLS za SMTP veze opts_smtp_sasl_security_options=SASL sigurnosne opcije opts_smtp_tls_security_level=SMTP TLS razina sigurnosti klijenta -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Stope isporuke rate_ecannot=Nije vam dopušteno uređivanje opcija stope isporuke @@ -461,8 +458,6 @@ acl_postfinger=Može li provjeriti konfiguraciju postfiksa? acl_manual=Može li urediti datoteku config? acl_dir=Dopušten direktorij za datoteke s mapama acl_bcc=Može li se urediti BCC mapiranje? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Korisničke poštanske sandučiće boxes_user=Korisnik @@ -512,15 +507,6 @@ mail_forward=Naprijed mail_rfc=Iz linije mail_move=Premjesti u: mail_eexists=Poruka više ne postoji! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Pročitajte e-poštu view_desc=Poruka $1 u $2 @@ -631,11 +617,9 @@ mailq_active=Aktivan mailq_deferred=Odgođena mailq_hold=Zadržite odabrano mailq_unhold=Odabrano zadržite -mailq_dir=Queue state flushq_title=Red ispiranja flushq_desc=Prisiljavanje pokušaja isporuke pošte pomoću naredbe $1 .. -flushq_desc2=.. check the mail log for results qview_title=Poruka u redu qview_desc=Iz datoteke $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Rukujete nepodudarnim SMTP klijentima? sasl_opts=Opcije sigurnosti SMTP-a sasl_noanonymous=Odbijte anonimne prijave sasl_noplaintext=Odbaci prijavu u običnom tekstu -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Odgoditi klijente sa neuspjelim prijavama? sasl_recip=Ograničenja za SMTP primatelja sasl_relay=Ograničenja SMTP releja diff --git a/postfix/lang/hu b/postfix/lang/hu index 424db4f38..7fa815fe6 100644 --- a/postfix/lang/hu +++ b/postfix/lang/hu @@ -241,6 +241,7 @@ opts_mydomain_default=Default (provided by system) opts_myhostname=Internet hostname of this mail system opts_myhostname_default=Default (provided by system) opts_mynetworks=Local networks +opts_mynetworks_default=Default (all attached networks) opts_mynetworks_style=Automatic local networks opts_mynetworks_subnet=Same IP subnet opts_mynetworks_class=Same network class diff --git a/postfix/lang/hu.auto b/postfix/lang/hu.auto index de28338db..843a978b9 100644 --- a/postfix/lang/hu.auto +++ b/postfix/lang/hu.auto @@ -10,13 +10,9 @@ smtpd_nomap2=A feladó címeinek korlátozására még nem került sor. smtpd_map=Megengedett címek a továbbításhoz smtpd_map2=A feladó címeire vonatkozó korlátozások +opts_smtp_use_tls=Használja a TLS-t az SMTP-kapcsolatokhoz opts_smtp_sasl_security_options=SASL biztonsági lehetőségek opts_smtp_tls_security_level=SMTP TLS kliens biztonsági szint -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols mapping_toomany=Vannak $1 térképbejegyzések, ami meghaladja a $2 megjelenítési korlátot. mapping_find=Megfelelő leképezések megjelenítése: @@ -31,26 +27,11 @@ sni_dom=Gazdanév sni_certs=Tanúsítványfájlok acl_sni=Szerkesztheti a tanúsítványokat? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? - -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_aname=Melléklet mailq_deleteall=Törölje a levél sorát mailq_deletealldesc=Kattintson erre a gombra az összes üzenet törléséhez a levél sorban. -mailq_dir=Queue state - -flushq_desc2=.. check the mail log for results opts_mime_header_checks=MIME fejléc-ellenőrző táblázatok opts_header_checks_no_map=(Jelenleg nincs meghatározva fejléc-ellenőrző térkép. Először határozzon meg egy térképet, majd szerkesztheti) @@ -73,10 +54,6 @@ log_manual_sender_dependent_default_transport_mapss=A feladótól függő címek opts_smtp_sasl_auth_enable=Használ SASL SMTP hitelesítést? opts_smtpd_tls_auth_only=Tilos a SASL hitelesítés nem biztonságos kapcsolatok esetén? -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication sasl_relay=SMTP továbbítási korlátozások opts_smtp_enforce_tls=TLS titkosítást igényel? sasl_level_dane=Opportunista DANE TLS diff --git a/postfix/lang/it.auto b/postfix/lang/it.auto index eb60a3cc3..625e1e6b9 100644 --- a/postfix/lang/it.auto +++ b/postfix/lang/it.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Predefinito (fornito dal sistema) opts_myhostname=Nome host Internet di questo sistema di posta opts_myhostname_default=Predefinito (fornito dal sistema) opts_mynetworks=Reti locali +opts_mynetworks_default=Predefinito (tutte le reti collegate) opts_mynetworks_style=Reti locali automatiche opts_mynetworks_subnet=Stessa sottorete IP opts_mynetworks_class=Stessa classe di rete @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Timeout in attesa di risposta ai DATI opts_smtp_data_xfer_timeout=Timeout in attesa di risposta per la trasmissione del contenuto del messaggio opts_smtp_data_done_timeout=Timeout in attesa di risposta alla fine "." opts_smtp_quit_timeout=Timeout in attesa di risposta a QUIT +opts_smtp_use_tls=Utilizzare TLS per connessioni SMTP opts_smtp_sasl_security_options=Opzioni di sicurezza SASL opts_smtp_tls_security_level=Livello di sicurezza del client TLS SMTP -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Tariffe di consegna rate_ecannot=Non è consentito modificare le opzioni relative alle tariffe di consegna @@ -461,8 +458,6 @@ acl_postfinger=È possibile verificare la configurazione postfix? acl_manual=È possibile modificare il file di configurazione? acl_dir=Directory consentita per i file delle mappe acl_bcc=È possibile modificare il mapping BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Cassette postali dell'utente boxes_user=Utente @@ -512,15 +507,6 @@ mail_forward=Inoltrare mail_rfc=Dalla linea mail_move=Sposta in: mail_eexists=Il messaggio non esiste più! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Leggi l'email view_desc=Messaggio $1 in $2 @@ -631,11 +617,9 @@ mailq_active=Attivo mailq_deferred=differite mailq_hold=Mantieni selezionato mailq_unhold=Non trattenuto selezionato -mailq_dir=Queue state flushq_title=Coda di scarico flushq_desc=Forzare il tentativo di consegna della posta con il comando $1 .. -flushq_desc2=.. check the mail log for results qview_title=Messaggio in coda qview_desc=Dal file $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Gestire client SMTP non conformi? sasl_opts=Opzioni di sicurezza SMTP sasl_noanonymous=Rifiuta accessi anonimi sasl_noplaintext=Rifiuta accessi in testo normale -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Ritardare i client con accessi non riusciti? sasl_recip=Restrizioni al destinatario SMTP sasl_relay=Limitazioni di inoltro SMTP diff --git a/postfix/lang/ja b/postfix/lang/ja index 62d1c7e02..992167f59 100644 --- a/postfix/lang/ja +++ b/postfix/lang/ja @@ -239,6 +239,7 @@ opts_mydomain_default=デフォルト (システムにより供給) opts_myhostname=このメール システムのインターネット ホスト名 opts_myhostname_default=デフォルト (システムにより供給) opts_mynetworks=ローカル ネットワーク +opts_mynetworks_default=デフォルト (すべてネットワークに接続) opts_mynetworks_style=自動ローカルネットワーク opts_mynetworks_subnet=Same IP subnet opts_mynetworks_class=Same network class diff --git a/postfix/lang/ja.auto b/postfix/lang/ja.auto index 5f62b9aa4..98e7addc1 100644 --- a/postfix/lang/ja.auto +++ b/postfix/lang/ja.auto @@ -16,13 +16,9 @@ smtpd_nomap2=送信者アドレスの制限のマップはまだ入力されて smtpd_map=中継に許可されたアドレス smtpd_map2=送信者アドレスの制限 +opts_smtp_use_tls=SMTP接続にTLSを使用する opts_smtp_sasl_security_options=SASLセキュリティオプション opts_smtp_tls_security_level=SMTPTLSクライアントのセキュリティレベル -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols opts_edebug=詳細ログレベルが欠落しているか無効です-ゼロより大きい数値である必要があります @@ -41,18 +37,6 @@ sni_certs=証明書ファイル acl_sni=証明書を編集できますか？ acl_client=SMTPクライアントの制限を編集できますか？ -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? - -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_body=メッセージ本文 view_afile=添付ファイル名 @@ -64,9 +48,6 @@ mailq_refresh=メールキューを更新 mailq_refreshdesc=このページをリロードして、メールキューの現在の状態を表示します。 mailq_deleteall=メールキューをクリア mailq_deletealldesc=メールキュー内のすべてのメッセージを削除するには、このボタンをクリックします。 -mailq_dir=Queue state - -flushq_desc2=.. check the mail log for results opts_mime_header_checks=MIMEヘッダーチェックテーブル opts_header_checks_no_map=(現在、ヘッダー チェック マップが定義されていません。最初にマップを定義してから編集できます) @@ -101,10 +82,6 @@ log_manual_sender_dependent_default_transport_mapss=$1の送信者依存アド opts_smtp_sasl_auth_enable=SASL SMTP認証を使用しますか？ opts_smtpd_tls_auth_only=安全でない接続でのSASL認証を禁止しますか？ -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication sasl_relay=SMTPリレーの制限 sasl_permit_tls_all_clientcerts=すべての証明書でTLSクライアントを許可する sasl_reject_unauth_pipelining=初期のSMTPコマンドを拒否する diff --git a/postfix/lang/ko b/postfix/lang/ko index a5d7eeb8f..2c4628240 100644 --- a/postfix/lang/ko +++ b/postfix/lang/ko @@ -140,6 +140,7 @@ opts_mydomain_default=기본값(시스템에서 제공) opts_myhostname=이 메일 시스템의 인터넷 호스트 이름 opts_myhostname_default=기본값(시스템에서 제공) opts_mynetworks=로컬 네트워크 +opts_mynetworks_default=기본값(모든 연결된 네트워크) opts_bounce_notice_recipient=바운스 시 포스트마스터 알림 메시지 전송 대상... opts_2bounce_notice_recipient=2회 바운스 시 포스터마스터 알림 메시지 전송 대상... opts_delay_notice_recipient=지연 시 포스트마스터 알림 메시지 전송 대상... diff --git a/postfix/lang/ko.auto b/postfix/lang/ko.auto index e08ad1d14..4861a9783 100644 --- a/postfix/lang/ko.auto +++ b/postfix/lang/ko.auto @@ -125,13 +125,9 @@ smtpd_nomap2=발신자 주소 제한에 대한 맵이 아직 입력되지 않았 smtpd_map=릴레이를 위해 허용 된 주소 smtpd_map2=발신자 주소에 대한 제한 +opts_smtp_use_tls=SMTP 연결에 TLS 사용 opts_smtp_sasl_security_options=SASL 보안 옵션 opts_smtp_tls_security_level=SMTP TLS 클라이언트 보안 수준 -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols opts_edebug=상세하지 않은 상세 로깅 레벨-0보다 큰 숫자 여야합니다. @@ -200,8 +196,6 @@ acl_postfinger=접미사 구성을 확인할 수 있습니까? acl_manual=구성 파일을 편집 할 수 있습니까? acl_dir=맵 파일의 허용 디렉토리 acl_bcc=BCC 매핑을 편집 할 수 있습니까? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=사용자 사서함 boxes_user=사용자 @@ -251,15 +245,6 @@ mail_forward=앞으로 mail_rfc=라인에서 mail_move=이동 : mail_eexists=더 이상 메시지가 없습니다! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=이메일 읽기 view_desc=$2의 메시지 $1 @@ -370,11 +355,9 @@ mailq_active=유효한 mailq_deferred=연기 됨 mailq_hold=선택된 홀드 mailq_unhold=보류되지 않은 선택 -mailq_dir=Queue state flushq_title=플러시 큐 flushq_desc=$1 명령으로 메일 배달을 강제로 시도했습니다. -flushq_desc2=.. check the mail log for results qview_title=대기중인 메시지 qview_desc=$1 파일에서 @@ -583,10 +566,6 @@ opts_broken_sasl_auth_clients=비준수 SMTP 클라이언트를 처리 하시겠 sasl_opts=SMTP 보안 옵션 sasl_noanonymous=익명 로그인 거부 sasl_noplaintext=일반 텍스트 로그인 거부 -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=로그인에 실패한 클라이언트를 지연 시키시겠습니까? sasl_recip=SMTP받는 사람 제한 sasl_relay=SMTP 릴레이 제한 diff --git a/postfix/lang/lt.auto b/postfix/lang/lt.auto index 9719f3491..4b4165676 100644 --- a/postfix/lang/lt.auto +++ b/postfix/lang/lt.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Numatytasis (teikia sistema) opts_myhostname=Šios pašto sistemos pagrindinis kompiuterio vardas opts_myhostname_default=Numatytasis (teikia sistema) opts_mynetworks=Vietiniai tinklai +opts_mynetworks_default=Numatytasis (visi prijungti tinklai) opts_mynetworks_style=Automatiniai vietiniai tinklai opts_mynetworks_subnet=Tas pats IP potinklis opts_mynetworks_class=Ta pati tinklo klasė @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Laikas, per kurį laukiama atsakymo į DATA opts_smtp_data_xfer_timeout=Laikas, per kurį laukiama atsakymo, kad būtų perduotas pranešimo turinys opts_smtp_data_done_timeout=Laikas, per kurį laukiama atsakymo pabaigos. opts_smtp_quit_timeout=Laikas, per kurį laukiama atsakymo į QUIT +opts_smtp_use_tls=SMTP ryšiams naudokite TLS opts_smtp_sasl_security_options=SASL saugos galimybės opts_smtp_tls_security_level=SMTP TLS kliento saugos lygis -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Pristatymo kainos rate_ecannot=Jums neleidžiama redaguoti pristatymo kainų parinkčių @@ -461,8 +458,6 @@ acl_postfinger=Ar galima patikrinti pašto indekso konfigūraciją? acl_manual=Ar galima redaguoti konfigūracijos failą? acl_dir=Leidžiamas žemėlapių failų katalogas acl_bcc=Ar galima redaguoti BCC žemėlapius? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Vartotojo pašto dėžutės boxes_user=Vartotojas @@ -512,15 +507,6 @@ mail_forward=Persiųsti mail_rfc=Iš eilutės mail_move=Pereiti prie: mail_eexists=Pranešimo nebeegzistuoja! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Skaityti el. Laišką view_desc=$1 pranešimas $2 @@ -631,11 +617,9 @@ mailq_active=Aktyvus mailq_deferred=Atidėtas mailq_hold=Laikykite pažymėtą mailq_unhold=Panaikinti pasirinkimą -mailq_dir=Queue state flushq_title=Praplaukite eilę flushq_desc=Priversti bandyti siųsti laiškus komanda $1 .. -flushq_desc2=.. check the mail log for results qview_title=Eilė eilėje qview_desc=Iš failo $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Tvarkykite neatitinkančius SMTP klientus? sasl_opts=SMTP saugos parinktys sasl_noanonymous=Atmesti anoniminius prisijungimus sasl_noplaintext=Atmesti paprasto teksto prisijungimus -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Vėluoti klientams nepavykus prisijungti? sasl_recip=SMTP gavėjo apribojimai sasl_relay=SMTP relės apribojimai diff --git a/postfix/lang/lv.auto b/postfix/lang/lv.auto index 59d86b456..eaee28158 100644 --- a/postfix/lang/lv.auto +++ b/postfix/lang/lv.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Noklusējums (nodrošina sistēma) opts_myhostname=Šīs pasta sistēmas interneta resursdators opts_myhostname_default=Noklusējums (nodrošina sistēma) opts_mynetworks=Vietējie tīkli +opts_mynetworks_default=Noklusējums (visi pievienotie tīkli) opts_mynetworks_style=Automātiski vietējie tīkli opts_mynetworks_subnet=Tas pats IP apakštīkls opts_mynetworks_class=Tā pati tīkla klase @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Noildze, gaidot atbildi uz DATA opts_smtp_data_xfer_timeout=Taimauts, gaidot atbildi, lai nosūtītu ziņojuma saturu opts_smtp_data_done_timeout=Taimauts, gaidot atbildi, lai beigtu "". opts_smtp_quit_timeout=Noildzis, gaidot atbildi uz QUIT +opts_smtp_use_tls=SMTP savienojumiem izmantojiet TLS opts_smtp_sasl_security_options=SASL drošības iespējas opts_smtp_tls_security_level=SMTP TLS klienta drošības līmenis -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Piegādes cenas rate_ecannot=Jums nav atļauts rediģēt piegādes tarifu opcijas @@ -461,8 +458,6 @@ acl_postfinger=Vai var pārbaudīt postfix konfigurāciju? acl_manual=Vai var rediģēt konfigurācijas failu? acl_dir=Atļauts karšu failu direktorijs acl_bcc=Vai var rediģēt BCC kartēšanu? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Lietotāju pastkastes boxes_user=Lietotājs @@ -512,15 +507,6 @@ mail_forward=Uz priekšu mail_rfc=No līnijas mail_move=Pārvietot uz: mail_eexists=Ziņojums vairs nepastāv! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Lasīt e-pastu view_desc=Ziņojums $1 $2 @@ -631,11 +617,9 @@ mailq_active=Aktīvs mailq_deferred=Atlikts mailq_hold=Turiet atlasīto mailq_unhold=Apturēt atlasīto -mailq_dir=Queue state flushq_title=Flush Queue flushq_desc=Pasta piespiešanas mēģinājuma piespiešana ar komandu $1 .. -flushq_desc2=.. check the mail log for results qview_title=Sagaidīts ziņojums qview_desc=No faila $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Rīkoties ar neatbilstošiem SMTP klientiem? sasl_opts=SMTP drošības iespējas sasl_noanonymous=Noraidiet anonīmus pieteikšanās datus sasl_noplaintext=Noraidīt vienkārša teksta pieteikumus -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Kavēt klientus ar neveiksmīgu pieteikšanos? sasl_recip=SMTP adresātu ierobežojumi sasl_relay=SMTP releja ierobežojumi diff --git a/postfix/lang/ms.auto b/postfix/lang/ms.auto index 522d4fafd..02a4df329 100644 --- a/postfix/lang/ms.auto +++ b/postfix/lang/ms.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Lalai (disediakan oleh sistem) opts_myhostname=Nama tuan rumah Internet sistem mel ini opts_myhostname_default=Lalai (disediakan oleh sistem) opts_mynetworks=Rangkaian tempatan +opts_mynetworks_default=Lalai (semua rangkaian dilampirkan) opts_mynetworks_style=Rangkaian tempatan automatik opts_mynetworks_subnet=Subnet IP yang sama opts_mynetworks_class=Kelas rangkaian yang sama @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Masa menunggu menunggu jawapan kepada DATA opts_smtp_data_xfer_timeout=Masa menunggu menunggu jawapan untuk menghantar kandungan mesej opts_smtp_data_done_timeout=Masa menunggu menunggu jawapan untuk mengakhiri "." opts_smtp_quit_timeout=Masa menunggu menunggu jawapan untuk QUIT +opts_smtp_use_tls=Gunakan TLS untuk sambungan SMTP opts_smtp_sasl_security_options=Pilihan keselamatan SASL opts_smtp_tls_security_level=Tahap keselamatan pelanggan SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Kadar penghantaran rate_ecannot=Anda tidak dibenarkan mengedit pilihan kadar penghantaran @@ -461,8 +458,6 @@ acl_postfinger=Bolehkah menyemak konfigurasi postfix? acl_manual=Boleh mengedit fail konfigurasi? acl_dir=Direktori yang dibenarkan untuk fail peta acl_bcc=Boleh mengedit pemetaan BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Peti mel pengguna boxes_user=Pengguna @@ -512,15 +507,6 @@ mail_forward=Teruskan mail_rfc=Dari baris mail_move=Berpindah ke: mail_eexists=Mesej tidak lagi wujud! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Baca E-mel view_desc=Mesej $1 di $2 @@ -631,11 +617,9 @@ mailq_active=Aktif mailq_deferred=Tertunda mailq_hold=Pegang Dipilih mailq_unhold=Un-Hold Selected -mailq_dir=Queue state flushq_title=Gilir Giliran flushq_desc=Memaksa cubaan penghantaran mel dengan perintah $1 .. -flushq_desc2=.. check the mail log for results qview_title=Mesej Terdiri qview_desc=Dari fail $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Mengendalikan klien SMTP yang tidak patuh? sasl_opts=Pilihan keselamatan SMTP sasl_noanonymous=Menolak log masuk tanpa nama sasl_noplaintext=Tolak kemasukan teks biasa -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Kelewatan pelanggan dengan log masuk gagal? sasl_recip=Sekatan penerima SMTP sasl_relay=Sekatan relay SMTP diff --git a/postfix/lang/mt.auto b/postfix/lang/mt.auto index 2bae5d709..b9c644774 100644 --- a/postfix/lang/mt.auto +++ b/postfix/lang/mt.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Default (ipprovdut mis-sistema) opts_myhostname=Isem tal-host tal-internet ta ’din is-sistema tal-posta opts_myhostname_default=Default (ipprovdut mis-sistema) opts_mynetworks=Netwerks lokali +opts_mynetworks_default=Default (in-netwerks kollha mehmuża) opts_mynetworks_style=Netwerks lokali awtomatiċi opts_mynetworks_subnet=L-istess subnet IP opts_mynetworks_class=L-istess klassi tan-netwerk @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=It-timeout meta tistenna risposta għad-DATA opts_smtp_data_xfer_timeout=It-timeout meta tistenna risposta biex tittrasmetti l-kontenut tal-messaġġ opts_smtp_data_done_timeout=It-timeout meta tistenna risposta biex jintemm "." opts_smtp_quit_timeout=It-timeout meta tistenna tweġiba għal Nieqaf +opts_smtp_use_tls=Uża TLS għal konnessjonijiet SMTP opts_smtp_sasl_security_options=Għażliet ta 'sigurtà SASL opts_smtp_tls_security_level=Livell ta' sigurtà tal-klijent SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Rati ta 'kunsinna rate_ecannot=M'għandekx permess tibdel l-għażliet tar-rati tal-kunsinna @@ -461,8 +458,6 @@ acl_postfinger=Tista 'tiċċekkja l-konfigurazzjoni ta' wara l-iffissar? acl_manual=Tista 'teditja l-fajl tal-konfigurazzjoni? acl_dir=Direttorju permess għall-fajls tal-mappa acl_bcc=Tista 'teditja l-immappjar BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Kaxxi tal-posta tal-utenti boxes_user=Utent @@ -512,15 +507,6 @@ mail_forward=’Il quddiem mail_rfc=Mil-linja mail_move=Nimxu lejn: mail_eexists=Messaġġ m'għadux jeżisti! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Aqra l-Email view_desc=Messaġġ $1 f '$2 @@ -631,11 +617,9 @@ mailq_active=Attiva mailq_deferred=Differit mailq_hold=Żomm magħżul mailq_unhold=Mhux Żomm magħżul -mailq_dir=Queue state flushq_title=Kju tal-flus flushq_desc=Ġiegħel l-attentat tal-konsenja tal-posta bil-kmand $1 .. -flushq_desc2=.. check the mail log for results qview_title=Messaġġ fil-kju qview_desc=Mill-fajl $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Immaniġġja klijenti SMTP mhux konformi? sasl_opts=Għażliet ta 'sigurtà SMTP sasl_noanonymous=Irrifjuta logins anonimi sasl_noplaintext=Irrifjuta l-logins ta 'test sempliċi -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Iddewwem il-klijenti bi logins falluti? sasl_recip=Restrizzjonijiet fuq ir-riċevitur SMTP sasl_relay=Restrizzjonijiet tar-relay SMTP diff --git a/postfix/lang/nl b/postfix/lang/nl index 7ad43305c..7eb8124eb 100644 --- a/postfix/lang/nl +++ b/postfix/lang/nl @@ -242,6 +242,7 @@ opts_mydomain_default=Standaard (verstrekt door het systeem) opts_myhostname=Internet hostnaam van dit mail systeem opts_myhostname_default=Standaard (verstrekt door het systeem) opts_mynetworks=Locale netwerken +opts_mynetworks_default=Standaard (alle toegevoegde netwerken) opts_mynetworks_style=Automatische locale netwerken opts_mynetworks_subnet=Zelfde IP subnet opts_mynetworks_class=Zelfde netwerk class diff --git a/postfix/lang/nl.auto b/postfix/lang/nl.auto index 603d90e9a..11e2917b0 100644 --- a/postfix/lang/nl.auto +++ b/postfix/lang/nl.auto @@ -8,13 +8,9 @@ smtpd_nomap2=Er is nog geen kaart met beperkingen voor afzenderadressen ingevoer smtpd_map=Toegestane adressen voor doorsturen smtpd_map2=Beperkingen op afzenderadressen +opts_smtp_use_tls=Gebruik TLS voor SMTP-verbindingen opts_smtp_sasl_security_options=SASL beveiligingsopties opts_smtp_tls_security_level=Beveiligingsniveau SMTP TLS-client -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols mapping_toomany=Er zijn $1 kaartvermeldingen, die boven de weergavelimiet van $2 liggen. mapping_find=Overeenkomende toewijzingen weergeven: @@ -29,26 +25,11 @@ sni_dom=Hostnaam sni_certs=Certificaatbestanden acl_sni=Kan certificaten bewerken? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? - -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_aname=Bijlage mailq_deleteall=E-mailwachtrij wissen mailq_deletealldesc=Klik op deze knop om alle berichten in de e-mailwachtrij te verwijderen. -mailq_dir=Queue state - -flushq_desc2=.. check the mail log for results opts_mime_header_checks=MIME-koptekstcontroletabellen opts_header_checks_no_map=(Er is momenteel geen kaart voor kopcontrole gedefinieerd. Definieer eerst een kaart, daarna kunt u deze bewerken) @@ -71,10 +52,6 @@ log_manual_sender_dependent_default_transport_mapss=Handmatig bewerkte afzendera opts_smtp_sasl_auth_enable=SASL SMTP-authenticatie gebruiken? opts_smtpd_tls_auth_only=SASL-authenticatie over onveilige verbindingen niet toestaan? -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication sasl_relay=SMTP-relaisbeperkingen opts_smtp_enforce_tls=TLS-codering vereist? sasl_level_dane=Opportunistische DANE TLS diff --git a/postfix/lang/no b/postfix/lang/no index 8c2563c6e..6568d2c65 100644 --- a/postfix/lang/no +++ b/postfix/lang/no @@ -244,6 +244,7 @@ opts_mydomain_default=Standard (angitt av systemet) opts_myhostname=Internet vertsnavn for dette e-post systemet opts_myhostname_default=Standard (angitt av systemet) opts_mynetworks=Lokale nettverk +opts_mynetworks_default=Standard (alle tilknyttede nettverk) opts_mynetworks_style=Automatiske lokale nettverk opts_mynetworks_subnet=Samme IP subnett opts_mynetworks_class=Samme nettverksklasse @@ -312,6 +313,7 @@ opts_smtp_data_init_timeout=Tidsavbrudd for venting på svar på DATA opts_smtp_data_xfer_timeout=Tidsavbrudd ved venting på svar på overføring av meldingsinnhold opts_smtp_data_done_timeout=Tidsavbrudd ved venting på svar på avsluttende "." opts_smtp_quit_timeout=Tidsavbrudd for venting på svar på QUIT +opts_smtp_use_tls=Bruk TLS for SMTP forbindelser opts_smtp_sasl_security_options=SASL sikkerhetsinnstillinger rate_title=Leveringsinnstillinger diff --git a/postfix/lang/no.auto b/postfix/lang/no.auto index 25040aedd..a7e7aa53d 100644 --- a/postfix/lang/no.auto +++ b/postfix/lang/no.auto @@ -3,37 +3,9 @@ opts_resolve_dequoted_address=Forhindre bruk av @ i postboksnavn? opts_smtpd_discard_ehlo_keywords=SMTP EHLO nøkkelord å ikke sende opts_smtp_tls_security_level=SMTP TLS klient sikkerhetsnivå -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols - -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? - -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_aname=Vedlegg -mailq_dir=Queue state - -flushq_desc2=.. check the mail log for results - opts_mime_header_checks=MIME-overskriftskontrolltabeller opts_header_checks_no_map=(Ingen overskriftskontrollkart er for øyeblikket definert. Definer et kart først, så kan du redigere det) - opts_mime_header_checks_no_map=(Ingen MIME-overskriftskontrollkart er for øyeblikket definert. Definer et kart først, så kan du redigere det) - -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication diff --git a/postfix/lang/pl b/postfix/lang/pl index 156b2051c..a364a8446 100644 --- a/postfix/lang/pl +++ b/postfix/lang/pl @@ -181,6 +181,7 @@ opts_mydomain_default=Domyślna (podawana przez system) opts_myhostname=Internetowa nazwa hosta tego systemu poczty opts_myhostname_default=Domyślna (podawana przez system) opts_mynetworks=Sieci lokalne +opts_mynetworks_default=Domyślne (wszystkie przyłączone sieci) opts_mynetworks_style=Automatyczne sieci lokalne opts_bounce_notice_recipient=Wysyłać powiadomienia od postmastera o odrzuceniu do... opts_2bounce_notice_recipient=Wysyłać powiadomienia od postmastera o 2-gim odrzuceniu do... diff --git a/postfix/lang/pl.auto b/postfix/lang/pl.auto index f1a4f7b63..29361a047 100644 --- a/postfix/lang/pl.auto +++ b/postfix/lang/pl.auto @@ -86,13 +86,9 @@ smtpd_nomap2=Nie wprowadzono jeszcze mapy ograniczeń adresów nadawców. smtpd_map=Dozwolone adresy do przekazywania smtpd_map2=Ograniczenia adresów nadawców +opts_smtp_use_tls=Użyj TLS do połączeń SMTP opts_smtp_sasl_security_options=Opcje bezpieczeństwa SASL opts_smtp_tls_security_level=Poziom bezpieczeństwa klienta SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols opts_edebug=Brakujący lub nieprawidłowy poziom rejestrowania pełnego - musi być liczbą większą od zera @@ -141,8 +137,6 @@ acl_mailq=Czy można zarządzać kolejką pocztową? acl_postfinger=Czy mogę sprawdzić konfigurację Postfiksa? acl_manual=Czy mogę edytować plik konfiguracyjny? acl_dir=Dozwolony katalog dla plików map -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_sent=Wysłany mail boxes_ecannot=Nie możesz czytać wiadomości e-mail @@ -187,15 +181,6 @@ mail_forward=Naprzód mail_rfc=Z linii mail_move=Przenieś do: mail_eexists=Wiadomość już nie istnieje! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Czytaj email view_desc=Wiadomość $1 w $2 @@ -305,11 +290,9 @@ mailq_active=Aktywny mailq_deferred=Odroczony mailq_hold=Przytrzymaj wybrane mailq_unhold=Un-Hold Selected -mailq_dir=Queue state flushq_title=Kolejka do spłukiwania flushq_desc=Wymuszanie próby dostarczenia poczty za pomocą polecenia $1 .. -flushq_desc2=.. check the mail log for results qview_title=Wiadomość w kolejce qview_attach=Załączniki @@ -483,10 +466,6 @@ opts_broken_sasl_auth_clients=Obsługiwać niezgodnych klientów SMTP? sasl_opts=Opcje bezpieczeństwa SMTP sasl_noanonymous=Odrzuć anonimowe loginy sasl_noplaintext=Odrzuć loginy w postaci zwykłego tekstu -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Opóźniasz klientów, których logowanie się nie powiodło? sasl_recip=Ograniczenia odbiorców SMTP sasl_relay=Ograniczenia przekaźnika SMTP diff --git a/postfix/lang/pt.auto b/postfix/lang/pt.auto index 614f6f651..6c5a339c3 100644 --- a/postfix/lang/pt.auto +++ b/postfix/lang/pt.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Padrão (fornecido pelo sistema) opts_myhostname=Nome do host da Internet deste sistema de correio opts_myhostname_default=Padrão (fornecido pelo sistema) opts_mynetworks=Redes locais +opts_mynetworks_default=Padrão (todas as redes conectadas) opts_mynetworks_style=Redes locais automáticas opts_mynetworks_subnet=Mesma sub-rede IP opts_mynetworks_class=Mesma classe de rede @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Tempo limite em espera de resposta para DATA opts_smtp_data_xfer_timeout=Tempo limite em espera da resposta para transmissão do conteúdo da mensagem opts_smtp_data_done_timeout=Tempo limite ao aguardar resposta para o final de "." opts_smtp_quit_timeout=Tempo limite em espera de resposta para QUIT +opts_smtp_use_tls=Use TLS para conexões SMTP opts_smtp_sasl_security_options=Opções de segurança SASL opts_smtp_tls_security_level=Nível de segurança do cliente SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Taxas de entrega rate_ecannot=Você não tem permissão para editar as opções de taxas de entrega @@ -461,8 +458,6 @@ acl_postfinger=Pode verificar a configuração do postfix? acl_manual=Pode editar o arquivo de configuração? acl_dir=Diretório permitido para arquivos de mapa acl_bcc=Pode editar o mapeamento BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Caixas de correio do usuário boxes_user=Do utilizador @@ -512,15 +507,6 @@ mail_forward=frente mail_rfc=Da linha mail_move=Mover para: mail_eexists=A mensagem não existe mais! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Ler email view_desc=Mensagem $1 em $2 @@ -631,11 +617,9 @@ mailq_active=Ativo mailq_deferred=Diferido mailq_hold=Reter selecionado mailq_unhold=Retirar a seleção selecionada -mailq_dir=Queue state flushq_title=Fila de descarga flushq_desc=Forçando a tentativa de entrega de correio com o comando $1 .. -flushq_desc2=.. check the mail log for results qview_title=Mensagem na fila qview_desc=Do arquivo $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Lidar com clientes SMTP não compatíveis? sasl_opts=Opções de segurança SMTP sasl_noanonymous=Rejeitar logons anônimos sasl_noplaintext=Rejeitar logins em texto sem formatação -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Atrasar clientes com logins com falha? sasl_recip=Restrições de destinatário SMTP sasl_relay=Restrições de retransmissão SMTP diff --git a/postfix/lang/pt_BR b/postfix/lang/pt_BR index 0c4809c2a..b3fa84913 100644 --- a/postfix/lang/pt_BR +++ b/postfix/lang/pt_BR @@ -141,6 +141,7 @@ opts_mydomain_default=Default (provided by system) opts_myhostname=Internet hostname of this mail system opts_myhostname_default=Default (provided by system) opts_mynetworks=Local networks +opts_mynetworks_default=Default (all attached networks) opts_bounce_notice_recipient=Send postmaster notice on bounce to... opts_2bounce_notice_recipient=Send postmaster notice on 2bounce to... opts_delay_notice_recipient=Send postmaster notice on delay to... diff --git a/postfix/lang/pt_BR.auto b/postfix/lang/pt_BR.auto index 3dfba1664..4df625993 100644 --- a/postfix/lang/pt_BR.auto +++ b/postfix/lang/pt_BR.auto @@ -124,13 +124,9 @@ smtpd_nomap2=Nenhum mapa para restrições nos endereços de remetente foi inser smtpd_map=Endereços permitidos para retransmissão smtpd_map2=Restrições nos endereços dos remetentes +opts_smtp_use_tls=Use TLS para conexões SMTP opts_smtp_sasl_security_options=Opções de segurança SASL opts_smtp_tls_security_level=Nível de segurança do cliente SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols opts_edebug=Nível de registro detalhado ausente ou inválido - deve ser um número maior que zero @@ -178,19 +174,8 @@ acl_postfinger=Pode verificar a configuração do postfix? acl_manual=Pode editar o arquivo de configuração? acl_dir=Diretório permitido para arquivos de mapa acl_bcc=Pode editar o mapeamento BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? mail_eexists=A mensagem não existe mais! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_flush=Rubor view_body=Mensagem de texto @@ -218,11 +203,9 @@ mailq_active=Ativo mailq_deferred=Diferido mailq_hold=Reter selecionado mailq_unhold=Retirar a seleção selecionada -mailq_dir=Queue state flushq_title=Fila de descarga flushq_desc=Forçando a tentativa de entrega de correio com o comando $1 .. -flushq_desc2=.. check the mail log for results after_err=Erro de configuração do Postfix : $1 @@ -425,10 +408,6 @@ opts_broken_sasl_auth_clients=Lidar com clientes SMTP não compatíveis? sasl_opts=Opções de segurança SMTP sasl_noanonymous=Rejeitar logons anônimos sasl_noplaintext=Rejeitar logins em texto sem formatação -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Atrasar clientes com logins com falha? sasl_recip=Restrições de destinatário SMTP sasl_relay=Restrições de retransmissão SMTP diff --git a/postfix/lang/ro.auto b/postfix/lang/ro.auto index c77b1bed3..669504ea7 100644 --- a/postfix/lang/ro.auto +++ b/postfix/lang/ro.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Implicit (furnizat de sistem) opts_myhostname=Numele gazdă pe Internet al acestui sistem de poștă opts_myhostname_default=Implicit (furnizat de sistem) opts_mynetworks=Retele locale +opts_mynetworks_default=Implicit (toate rețelele atașate) opts_mynetworks_style=Retele locale automate opts_mynetworks_subnet=Aceeași subrețea IP opts_mynetworks_class=Aceeași clasă de rețea @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Timp de așteptare pentru răspunsul la DATA opts_smtp_data_xfer_timeout=Timp de așteptare pentru a răspunde pentru a transmite conținutul mesajului opts_smtp_data_done_timeout=Perioada de așteptare pentru ca răspunsul să se încheie "." opts_smtp_quit_timeout=Timeout la așteptarea răspunsului la QUIT +opts_smtp_use_tls=Utilizați TLS pentru conexiunile SMTP opts_smtp_sasl_security_options=Opțiuni de securitate SASL opts_smtp_tls_security_level=Nivelul de securitate al clientului SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Tarifele de livrare rate_ecannot=Nu aveți voie să modificați opțiunile privind tarifele de livrare @@ -461,8 +458,6 @@ acl_postfinger=Se poate verifica configurația postfix? acl_manual=Se poate edita fișierul de configurare? acl_dir=Director permis pentru fișierele de hartă acl_bcc=Poate edita maparea BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Căsuțe poștale pentru utilizator boxes_user=Utilizator @@ -512,15 +507,6 @@ mail_forward=Redirecţiona mail_rfc=Din linie mail_move=Treceți la: mail_eexists=Mesajul nu mai există! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Citiți e-mail view_desc=Mesajul $1 în $2 @@ -631,11 +617,9 @@ mailq_active=Activ mailq_deferred=amânat mailq_hold=Țineți selectat mailq_unhold=Dezactivează selectat -mailq_dir=Queue state flushq_title=Coada de spălare flushq_desc=Forțarea încercării de livrare a poștei cu comanda $1 .. -flushq_desc2=.. check the mail log for results qview_title=Mesaj în coadă qview_desc=Din fișierul $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Să gestionați clienți SMTP neconformiți? sasl_opts=Opțiuni de securitate SMTP sasl_noanonymous=Respingeți autentificările anonime sasl_noplaintext=Respingeți conectările cu text simplu -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Întârzieți clienții cu autentificări eșuate? sasl_recip=Restricții destinatar SMTP sasl_relay=Restricții ale releului SMTP diff --git a/postfix/lang/ru b/postfix/lang/ru index 84515b372..6da8cebc4 100644 --- a/postfix/lang/ru +++ b/postfix/lang/ru @@ -140,6 +140,7 @@ opts_mydomain_default=По умолчанию (передается систем opts_myhostname=Имя узла интернет этой почтовой системы opts_myhostname_default=По умолчанию (передается системой) opts_mynetworks=Локальные сети +opts_mynetworks_default=По умолчанию (все существующие сети) opts_bounce_notice_recipient=Отправлять postmaster уведомление о зависшей почте на ... opts_2bounce_notice_recipient=Отправлять postmaster уведомление о зависшей (2bounce) почте на... opts_delay_notice_recipient=Отправлять postmaster уведомление о задержке на... diff --git a/postfix/lang/ru.auto b/postfix/lang/ru.auto index 50d5bdc42..9600282ae 100644 --- a/postfix/lang/ru.auto +++ b/postfix/lang/ru.auto @@ -125,13 +125,9 @@ smtpd_nomap2=Карта ограничений для адресов отпра smtpd_map=Разрешенные адреса для ретрансляции smtpd_map2=Ограничения по адресам отправителя +opts_smtp_use_tls=Использовать TLS для SMTP-подключений opts_smtp_sasl_security_options=Опции безопасности SASL opts_smtp_tls_security_level=Уровень безопасности клиента SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols opts_edebug=Отсутствует или неверный уровень подробного ведения журнала - должно быть число больше нуля @@ -184,20 +180,9 @@ acl_postfinger=Можете проверить настройку постфик acl_manual=Можно редактировать конфигурационный файл? acl_dir=Разрешенный каталог для файлов карт acl_bcc=Можно ли редактировать отображение BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? mail_move=Переместить в: mail_eexists=Сообщение больше не существует! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_flush=Румянец view_body=Текстовое сообщение @@ -240,11 +225,9 @@ mailq_active=активный mailq_deferred=Отложенный mailq_hold=Удерживать выбранный mailq_unhold=Un-Hold Selected -mailq_dir=Queue state flushq_title=Flush Queue flushq_desc=Принудительная попытка доставки почты с помощью команды $1 .. -flushq_desc2=.. check the mail log for results qview_title=Сообщение в очереди qview_desc=Из файла $1 @@ -452,10 +435,6 @@ opts_broken_sasl_auth_clients=Обрабатывать несовместимы sasl_opts=Параметры безопасности SMTP sasl_noanonymous=Отклонить анонимный вход sasl_noplaintext=Отклонить текстовые логины -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Задержка клиентов с неудачными входами? sasl_recip=Ограничения получателя SMTP sasl_relay=Ограничения ретрансляции SMTP diff --git a/postfix/lang/sk.auto b/postfix/lang/sk.auto index 327f554f0..1305b23b7 100644 --- a/postfix/lang/sk.auto +++ b/postfix/lang/sk.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Predvolené (poskytované systémom) opts_myhostname=Internetové meno hostiteľa tohto poštového systému opts_myhostname_default=Predvolené (poskytované systémom) opts_mynetworks=Lokálne siete +opts_mynetworks_default=Predvolené (všetky pripojené siete) opts_mynetworks_style=Automatické lokálne siete opts_mynetworks_subnet=Rovnaká podsieť IP opts_mynetworks_class=Rovnaká trieda siete @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Časový limit pri čakaní na odpoveď na DATA opts_smtp_data_xfer_timeout=Časový limit pri čakaní na odpoveď na prenos obsahu správy opts_smtp_data_done_timeout=Časový limit pri čakaní na odpoveď na koniec. opts_smtp_quit_timeout=Časový limit čaká na odpoveď na QUIT +opts_smtp_use_tls=Na pripojenie SMTP použite TLS opts_smtp_sasl_security_options=Možnosti zabezpečenia SASL opts_smtp_tls_security_level=Úroveň zabezpečenia klienta SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Sadzby za dodanie rate_ecannot=Nemáte dovolené upravovať možnosti sadzieb doručenia @@ -461,8 +458,6 @@ acl_postfinger=Môžete skontrolovať nastavenie postfixu? acl_manual=Môžete upraviť konfiguračný súbor? acl_dir=Povolený adresár pre súbory máp acl_bcc=Môžete upravovať mapovanie BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Používateľské schránky boxes_user=užívateľ @@ -512,15 +507,6 @@ mail_forward=vpred mail_rfc=Z riadku mail_move=Presunúť do: mail_eexists=Správa už neexistuje! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Prečítajte si e-mail view_desc=Správa $1 v $2 @@ -631,11 +617,9 @@ mailq_active=aktívny mailq_deferred=odložené mailq_hold=Vybraté mailq_unhold=Zrušené pozastavenie vybraté -mailq_dir=Queue state flushq_title=Splachovacia fronta flushq_desc=Vynútenie pokusu o doručenie pošty príkazom $1 .. -flushq_desc2=.. check the mail log for results qview_title=Správa vo fronte qview_desc=Zo súboru $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Zaobchádzajte s klientmi SMTP, ktorí nie sú v s sasl_opts=Možnosti zabezpečenia SMTP sasl_noanonymous=Odmietnuť anonymné prihlásenie sasl_noplaintext=Odmietnuť prihlásenia prostého textu -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Odklad klientov s neúspešným prihlásením? sasl_recip=Obmedzenia pre príjemcov SMTP sasl_relay=Obmedzenia relé SMTP diff --git a/postfix/lang/sl.auto b/postfix/lang/sl.auto index c6b9c593d..bbaf33ec5 100644 --- a/postfix/lang/sl.auto +++ b/postfix/lang/sl.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Privzeto (omogoči sistem) opts_myhostname=Internetno ime gostitelja tega poštnega sistema opts_myhostname_default=Privzeto (omogoči sistem) opts_mynetworks=Lokalna omrežja +opts_mynetworks_default=Privzeto (vsa priključena omrežja) opts_mynetworks_style=Samodejna lokalna omrežja opts_mynetworks_subnet=Ista podmreža IP opts_mynetworks_class=Isti omrežni razred @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Čas po čakanju na odgovor na DATA opts_smtp_data_xfer_timeout=Čas po čakanju na odgovor za prenos vsebine sporočila opts_smtp_data_done_timeout=Čas pred čakanjem na odgovor do konca. " opts_smtp_quit_timeout=Čas čakanja na odgovor na QUIT +opts_smtp_use_tls=Uporabite TLS za povezave SMTP opts_smtp_sasl_security_options=Možnosti varnosti SASL opts_smtp_tls_security_level=Raven varnosti odjemalca SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Stopnje dostave rate_ecannot=Ne morete urejati možnosti stopenj dostave @@ -461,8 +458,6 @@ acl_postfinger=Ali lahko preverite konfiguracijo postfiksa? acl_manual=Ali lahko urejate konfiguracijsko datoteko? acl_dir=Dovoljen imenik za datoteke z zemljevidi acl_bcc=Ali lahko uredite preslikavo BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Uporabniški nabiralniki boxes_user=Uporabnik @@ -512,15 +507,6 @@ mail_forward=Naprej mail_rfc=Iz vrstice mail_move=Premakni v: mail_eexists=Sporočilo ne obstaja več! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Preberite e-pošto view_desc=Sporočilo $1 v $2 @@ -631,11 +617,9 @@ mailq_active=Aktivno mailq_deferred=Odloženo mailq_hold=Držite izbrano mailq_unhold=Izbrano zadržite -mailq_dir=Queue state flushq_title=Čakalna vrsta flushq_desc=Prisiljanje poskusa dostave pošte z ukazom $1. -flushq_desc2=.. check the mail log for results qview_title=Sporočilo v čakalni vrsti qview_desc=Iz datoteke $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Ravnate z neustreznimi odjemalci SMTP? sasl_opts=Možnosti varnosti SMTP sasl_noanonymous=Zavrnite anonimne prijave sasl_noplaintext=Zavrni prijavo navadnega besedila -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Zamudite stranke s neuspešno prijavo? sasl_recip=Omejitve za prejemnike SMTP sasl_relay=Omejitve releja SMTP diff --git a/postfix/lang/sv b/postfix/lang/sv index 25c7f6187..125f377be 100644 --- a/postfix/lang/sv +++ b/postfix/lang/sv @@ -138,6 +138,7 @@ opts_mydomain_default=Standard (sätts av systemet) opts_myhostname=Internet-datornamn för detta e-postsystem opts_myhostname_default=Standard (sätts av systemet) opts_mynetworks=Lokala nätverk +opts_mynetworks_default=Standard (alla anslutna nätverk) opts_bounce_notice_recipient=Skicka meddelande om studs till ... opts_2bounce_notice_recipient=Skicka meddelande om dubbelstuds till ... opts_delay_notice_recipient=Skicka meddelande om fördröjning till ... diff --git a/postfix/lang/sv.auto b/postfix/lang/sv.auto index 30d29ddce..65844fe25 100644 --- a/postfix/lang/sv.auto +++ b/postfix/lang/sv.auto @@ -127,13 +127,9 @@ smtpd_nomap2=Ingen karta för begränsningar för avsändaradresser har ännu la smtpd_map=Tillåtna adresser för vidarebefordran smtpd_map2=Begränsningar i avsändarens adresser +opts_smtp_use_tls=Använd TLS för SMTP-anslutningar opts_smtp_sasl_security_options=SASL-säkerhetsalternativ opts_smtp_tls_security_level=SMTP TLS klient säkerhetsnivå -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols debug_version=Postfix-modul för Webmin - version $1 opts_edebug=Saknad eller ogiltig verbos loggningsnivå - måste vara ett nummer större än noll @@ -219,8 +215,6 @@ acl_postfinger=Kan kontrollera postfixkonfiguration? acl_manual=Kan redigera konfigurationsfilen? acl_dir=Tillåten katalog för kartfiler acl_bcc=Kan redigera BCC-kartläggning? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Användarbrevlådor boxes_user=Användare @@ -270,15 +264,6 @@ mail_forward=Framåt mail_rfc=Från rad mail_move=Flytta till: mail_eexists=Meddelandet finns inte längre! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Läs e-post view_desc=Meddelande $1 i $2 @@ -389,11 +374,9 @@ mailq_active=Aktiva mailq_deferred=uppskjuten mailq_hold=Håll vald mailq_unhold=Ta bort valt -mailq_dir=Queue state flushq_title=Spolningskö flushq_desc=Tvingar försökt leverans av e-post med kommandot $1 .. -flushq_desc2=.. check the mail log for results qview_title=Meddelande i kö qview_desc=Från fil $1 @@ -601,10 +584,6 @@ opts_broken_sasl_auth_clients=Hanterar du icke-kompatibla SMTP-klienter? sasl_opts=SMTP-säkerhetsalternativ sasl_noanonymous=Avvisa anonyma inloggningar sasl_noplaintext=Avvisa vanliga textinloggningar -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Försena klienter med misslyckade inloggningar? sasl_recip=SMTP-mottagarbegränsningar sasl_relay=SMTP-reläbegränsningar diff --git a/postfix/lang/th.auto b/postfix/lang/th.auto index 722cfcdbe..27d1466f8 100644 --- a/postfix/lang/th.auto +++ b/postfix/lang/th.auto @@ -245,6 +245,7 @@ opts_mydomain_default=ค่าเริ่มต้น (จัดทำโด opts_myhostname=ชื่อโฮสต์อินเทอร์เน็ตของระบบจดหมายนี้ opts_myhostname_default=ค่าเริ่มต้น (จัดทำโดยระบบ) opts_mynetworks=เครือข่ายท้องถิ่น +opts_mynetworks_default=ค่าเริ่มต้น (เครือข่ายที่แนบมาทั้งหมด) opts_mynetworks_style=เครือข่ายท้องถิ่นอัตโนมัติ opts_mynetworks_subnet=IP ซับเน็ตเดียวกัน opts_mynetworks_class=คลาสเครือข่ายเดียวกัน @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=หมดเวลาในการรอคำต opts_smtp_data_xfer_timeout=หมดเวลาในการรอคำตอบเพื่อส่งเนื้อหาข้อความ opts_smtp_data_done_timeout=หมดเวลาในการรอคำตอบให้จบ "" opts_smtp_quit_timeout=หมดเวลาในการรอคำตอบสำหรับ QUIT +opts_smtp_use_tls=ใช้ TLS สำหรับการเชื่อมต่อ SMTP opts_smtp_sasl_security_options=ตัวเลือกความปลอดภัยของ SASL opts_smtp_tls_security_level=ระดับความปลอดภัยของไคลเอ็นต์ SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=อัตราการจัดส่ง rate_ecannot=คุณไม่ได้รับอนุญาตให้แก้ไขตัวเลือกอัตราการจัดส่ง @@ -461,8 +458,6 @@ acl_postfinger=สามารถตรวจสอบการกำหนด acl_manual=สามารถแก้ไขไฟล์กำหนดค่าได้หรือไม่ acl_dir=ไดเรกทอรีที่อนุญาตสำหรับไฟล์แผนที่ acl_bcc=สามารถแก้ไขการแมป BCC ได้หรือไม่ -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=กล่องจดหมายของผู้ใช้ boxes_user=ผู้ใช้งาน @@ -512,15 +507,6 @@ mail_forward=ข้างหน้า mail_rfc=จากบรรทัด mail_move=ย้ายไปที่: mail_eexists=ไม่มีข้อความอีกต่อไป! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=อ่านอีเมล view_desc=ข้อความ $1 ใน $2 @@ -631,11 +617,9 @@ mailq_active=คล่องแคล่ว mailq_deferred=รอการตัดบัญชี mailq_hold=เลือกไว้ mailq_unhold=ยกเลิกการพักที่เลือก -mailq_dir=Queue state flushq_title=Flush Queue flushq_desc=การบังคับให้พยายามส่งเมลด้วยคำสั่ง $1 .. -flushq_desc2=.. check the mail log for results qview_title=ข้อความที่ถูกจัดคิว qview_desc=จากไฟล์ $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=จัดการกับไคลเอ็น sasl_opts=ตัวเลือกความปลอดภัยของ SMTP sasl_noanonymous=ปฏิเสธการเข้าสู่ระบบแบบไม่ระบุชื่อ sasl_noplaintext=ปฏิเสธการเข้าสู่ระบบข้อความล้วน -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=ลูกค้าล่าช้าด้วยการเข้าสู่ระบบล้มเหลว? sasl_recip=ข้อ จำกัด ของผู้รับ SMTP sasl_relay=ข้อ จำกัด การส่งต่อ SMTP diff --git a/postfix/lang/tr.auto b/postfix/lang/tr.auto index 90a9f351c..50ade2f99 100644 --- a/postfix/lang/tr.auto +++ b/postfix/lang/tr.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Varsayılan (sistem tarafından sağlanır) opts_myhostname=Bu posta sisteminin İnternet ana bilgisayar adı opts_myhostname_default=Varsayılan (sistem tarafından sağlanır) opts_mynetworks=Yerel ağlar +opts_mynetworks_default=Varsayılan (tüm bağlı ağlar) opts_mynetworks_style=Otomatik yerel ağlar opts_mynetworks_subnet=Aynı IP alt ağı opts_mynetworks_class=Aynı ağ sınıfı @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=DATA'ya yanıt beklerken zaman aşımı opts_smtp_data_xfer_timeout=Mesaj içeriğinin iletilmesi için yanıt beklerken zaman aşımı opts_smtp_data_done_timeout="" İle biten cevabı beklerken zaman aşımı opts_smtp_quit_timeout=QUIT yanıtını beklerken zaman aşımı +opts_smtp_use_tls=SMTP bağlantıları için TLS kullanma opts_smtp_sasl_security_options=SASL güvenlik seçenekleri opts_smtp_tls_security_level=SMTP TLS istemci güvenlik düzeyi -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Yayınlanma oranları rate_ecannot=Dağıtım ücretleri seçeneklerini düzenleme izniniz yok @@ -461,8 +458,6 @@ acl_postfinger=Postfix yapılandırmasını kontrol edebilir mi? acl_manual=Yapılandırma dosyasını düzenleyebilir mi? acl_dir=Harita dosyaları için izin verilen dizin acl_bcc=BCC eşlemesini düzenleyebilir mi? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Kullanıcı Posta Kutuları boxes_user=kullanıcı @@ -512,15 +507,6 @@ mail_forward=ileri mail_rfc=Satırdan mail_move=Taşınmak: mail_eexists=Mesaj artık mevcut değil! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=E-postayı Oku view_desc=$2 içindeki $1 mesajı @@ -631,11 +617,9 @@ mailq_active=Aktif mailq_deferred=Ertelenmiş mailq_hold=Seçileni Tut mailq_unhold=Seçileni Bekletmeyi Kaldır -mailq_dir=Queue state flushq_title=Sırayı Al flushq_desc=$1 komutuyla postanın teslim edilmeye çalışılması zorlanıyor. -flushq_desc2=.. check the mail log for results qview_title=Kuyruğa Alınmış Mesaj qview_desc=$1 dosyasından @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Uyumlu olmayan SMTP istemcileri ele alınsın mı? sasl_opts=SMTP güvenlik seçenekleri sasl_noanonymous=Anonim girişleri reddet sasl_noplaintext=Düz metin girişlerini reddet -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Oturum açma başarısız olan istemciler gecikiyor mu? sasl_recip=SMTP alıcı kısıtlamaları sasl_relay=SMTP geçiş kısıtlamaları diff --git a/postfix/lang/uk b/postfix/lang/uk index b9aab3d69..f27c46783 100644 --- a/postfix/lang/uk +++ b/postfix/lang/uk @@ -140,6 +140,7 @@ opts_mydomain_default=За замовчуванням (передається с opts_myhostname=Ім'я вузла інтернет цієї поштової системи opts_myhostname_default=За замовчуванням (передається системою) opts_mynetworks=Локальні мережі +opts_mynetworks_default=За замовчуванням (всі існуючі мережі) opts_bounce_notice_recipient=Відправляти postmaster повідомлення про завислу пошті на ... opts_2bounce_notice_recipient=Відправляти postmaster повідомлення про завислу (2bounce) пошті на... opts_delay_notice_recipient=Відправляти postmaster повідомлення про затримку на... diff --git a/postfix/lang/uk.auto b/postfix/lang/uk.auto index cd30bc59d..522d2609b 100644 --- a/postfix/lang/uk.auto +++ b/postfix/lang/uk.auto @@ -125,13 +125,9 @@ smtpd_nomap2=Карта обмежень щодо адрес відправни smtpd_map=Дозволені адреси для ретрансляції smtpd_map2=Обмеження щодо адрес відправника +opts_smtp_use_tls=Використовуйте TLS для з'єднань SMTP opts_smtp_sasl_security_options=Параметри безпеки SASL opts_smtp_tls_security_level=Рівень безпеки клієнта SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols opts_edebug=Відсутній або недійсний рівень вхідного журналу - повинен бути числом більше нуля @@ -184,20 +180,9 @@ acl_postfinger=Чи можна перевірити конфігурацію п acl_manual=Чи можна редагувати конфігураційний файл? acl_dir=Дозволений каталог для файлів карт acl_bcc=Чи можна редагувати відображення BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? mail_move=Переїжджати: mail_eexists=Повідомлення більше не існує! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_flush=Промийте view_body=Текст повідомлення @@ -240,11 +225,9 @@ mailq_active=Активний mailq_deferred=Відкладено mailq_hold=Утримуйте вибране mailq_unhold=Скасувати вибране -mailq_dir=Queue state flushq_title=Черга змивання flushq_desc=Примушування спроби доставки пошти за допомогою команди $1. -flushq_desc2=.. check the mail log for results qview_title=Повідомлення в черзі qview_desc=З файлу $1 @@ -452,10 +435,6 @@ opts_broken_sasl_auth_clients=Обробляти клієнтів, які не sasl_opts=Параметри безпеки SMTP sasl_noanonymous=Відхилити анонімні входи sasl_noplaintext=Відхилити вхід із звичайним текстом -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Затримка клієнтів із невдалою реєстрацією? sasl_recip=Обмеження для одержувачів SMTP sasl_relay=Обмеження ретрансляції SMTP diff --git a/postfix/lang/ur.auto b/postfix/lang/ur.auto index e24e56cf3..33f93b67a 100644 --- a/postfix/lang/ur.auto +++ b/postfix/lang/ur.auto @@ -245,6 +245,7 @@ opts_mydomain_default=پہلے سے طے شدہ (نظام کے ذریعہ فرا opts_myhostname=اس میل سسٹم کا انٹرنیٹ ہوسٹ نام opts_myhostname_default=پہلے سے طے شدہ (نظام کے ذریعہ فراہم کردہ) opts_mynetworks=مقامی نیٹ ورک +opts_mynetworks_default=پہلے سے طے شدہ (تمام منسلک نیٹ ورک) opts_mynetworks_style=خودکار مقامی نیٹ ورکس opts_mynetworks_subnet=ایک ہی IP سب نیٹٹ opts_mynetworks_class=ایک جیسے نیٹ ورک کلاس @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=ڈیٹا کے جواب کے منتظر وقت ختم opts_smtp_data_xfer_timeout=پیغامات کے مواد کی ترسیل کے جواب کے منتظر ٹائم آؤٹ opts_smtp_data_done_timeout="ختم ہونے کے جواب کے منتظر وقت ختم۔" opts_smtp_quit_timeout=کوئٹ کے جواب کے منتظر ٹائم آؤٹ +opts_smtp_use_tls=ایس ایم ٹی پی کنیکشن کے لئے ٹی ایل ایس کا استعمال کریں opts_smtp_sasl_security_options=SASL سیکیورٹی کے اختیارات opts_smtp_tls_security_level=SMTP TLS کلائنٹ سیکورٹی لیول -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=فراہمی کی شرح rate_ecannot=آپ کو ترسیل کی شرح کے اختیارات میں ترمیم کرنے کی اجازت نہیں ہے @@ -461,8 +458,6 @@ acl_postfinger=پوسٹ فکس ترتیب کو جانچ سکتا ہے؟ acl_manual=کیا تشکیل فائل میں ترمیم کی جاسکتی ہے؟ acl_dir=نقشہ فائلوں کے لئے اجازت شدہ ڈائریکٹری acl_bcc=کیا بی سی سی میپنگ میں ترمیم کی جاسکتی ہے؟ -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=صارف میل باکسز boxes_user=صارف @@ -512,15 +507,6 @@ mail_forward=آگے mail_rfc=لائن سے mail_move=پر منتقل: mail_eexists=پیغام اب موجود نہیں ہے! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=ای میل پڑھیں view_desc=Message $1 in $2 @@ -631,11 +617,9 @@ mailq_active=فعال mailq_deferred=موخر mailq_hold=پکڑو mailq_unhold=غیر ہولڈ سلیکٹڈ -mailq_dir=Queue state flushq_title=فلش قطار flushq_desc=Forcing the attempted delivery of mail with the command $1 .. -flushq_desc2=.. check the mail log for results qview_title=قطار میں موجود پیغام qview_desc=From file $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=غیر تعمیل ایس ایم ٹی پی مؤکل sasl_opts=SMTP سیکیورٹی کے اختیارات sasl_noanonymous=گمنام لاگ ان کو مسترد کریں sasl_noplaintext=سادہ متن لاگ ان کو مسترد کریں -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=ناکام لاگ ان والے گاہکوں کو تاخیر؟ sasl_recip=SMTP وصول کنندہ پر پابندیاں sasl_relay=ایس ایم ٹی پی ریلے پر پابندیاں diff --git a/postfix/lang/vi.auto b/postfix/lang/vi.auto index 5ddd63f84..b105f9179 100644 --- a/postfix/lang/vi.auto +++ b/postfix/lang/vi.auto @@ -245,6 +245,7 @@ opts_mydomain_default=Mặc định (được cung cấp bởi hệ thống) opts_myhostname=Tên máy chủ Internet của hệ thống thư này opts_myhostname_default=Mặc định (được cung cấp bởi hệ thống) opts_mynetworks=Mạng cục bộ +opts_mynetworks_default=Mặc định (tất cả các mạng đính kèm) opts_mynetworks_style=Mạng cục bộ tự động opts_mynetworks_subnet=Cùng một mạng con IP opts_mynetworks_class=Cùng lớp mạng @@ -314,13 +315,9 @@ opts_smtp_data_init_timeout=Hết thời gian chờ đợi câu trả lời cho opts_smtp_data_xfer_timeout=Hết thời gian chờ đợi câu trả lời để truyền tải nội dung tin nhắn opts_smtp_data_done_timeout=Hết thời gian chờ đợi câu trả lời kết thúc "." opts_smtp_quit_timeout=Hết thời gian chờ đợi câu trả lời cho QUIT +opts_smtp_use_tls=Sử dụng TLS cho các kết nối SMTP opts_smtp_sasl_security_options=Tùy chọn bảo mật SASL opts_smtp_tls_security_level=Mức độ bảo mật của máy khách SMTP TLS -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols rate_title=Giá giao hàng rate_ecannot=Bạn không được phép chỉnh sửa các tùy chọn giá giao hàng @@ -461,8 +458,6 @@ acl_postfinger=Có thể kiểm tra cấu hình postfix? acl_manual=Có thể chỉnh sửa tập tin cấu hình? acl_dir=Thư mục được phép cho các tập tin bản đồ acl_bcc=Có thể chỉnh sửa ánh xạ BCC? -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=Hộp thư người dùng boxes_user=Người sử dụng @@ -512,15 +507,6 @@ mail_forward=Ở đằng trước mail_rfc=Từ dòng mail_move=Chuyển tới: mail_eexists=Tin nhắn không còn tồn tại! -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=Đọc mail view_desc=Tin nhắn $1 trong $2 @@ -631,11 +617,9 @@ mailq_active=Hoạt động mailq_deferred=Hoãn lại mailq_hold=Giữ lựa chọn mailq_unhold=Bỏ chọn -mailq_dir=Queue state flushq_title=Hàng đợi flushq_desc=Buộc gửi thư đã cố gắng bằng lệnh $1 .. -flushq_desc2=.. check the mail log for results qview_title=Tin nhắn xếp hàng qview_desc=Từ tệp $1 @@ -843,10 +827,6 @@ opts_broken_sasl_auth_clients=Xử lý các máy khách SMTP không tuân thủ? sasl_opts=Tùy chọn bảo mật SMTP sasl_noanonymous=Từ chối đăng nhập ẩn danh sasl_noplaintext=Từ chối đăng nhập văn bản đơn giản -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=Trì hoãn khách hàng với thông tin đăng nhập thất bại? sasl_recip=Hạn chế người nhận SMTP sasl_relay=Hạn chế chuyển tiếp SMTP diff --git a/postfix/lang/zh b/postfix/lang/zh index 183a9b052..e8e7aa546 100644 --- a/postfix/lang/zh +++ b/postfix/lang/zh @@ -138,6 +138,7 @@ opts_mydomain_default=缺省 (系统提供) opts_myhostname=此邮件系统的因特网主机名 opts_myhostname_default=缺省 (系统提供) opts_mynetworks=本地网络 +opts_mynetworks_default=缺省 (所有连接的网络) opts_bounce_notice_recipient=在退回时发送通知给psotmaster... opts_2bounce_notice_recipient=在两次退回时发送通知给psotmaster... opts_delay_notice_recipient=在延迟时发送通知给psotmaster... diff --git a/postfix/lang/zh.auto b/postfix/lang/zh.auto index e8778e76a..a3cc870de 100644 --- a/postfix/lang/zh.auto +++ b/postfix/lang/zh.auto @@ -127,13 +127,9 @@ smtpd_nomap2=尚未输入限制发件人地址的地图。 smtpd_map=允许中继的地址 smtpd_map2=发件人地址限制 +opts_smtp_use_tls=使用TLS进行SMTP连接 opts_smtp_sasl_security_options=SASL安全选项 opts_smtp_tls_security_level=SMTP TLS 客户端安全级别 -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols debug_version=Webmin的Postfix模块-版本$1 opts_edebug=详细记录级别缺失或无效-必须是大于零的数字 @@ -219,8 +215,6 @@ acl_postfinger=可以检查后缀配置吗？ acl_manual=可以编辑配置文件吗？ acl_dir=地图文件的允许目录 acl_bcc=可以编辑密件抄送映射吗？ -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? boxes_title=用户邮箱 boxes_user=用户 @@ -270,15 +264,6 @@ mail_forward=向前 mail_rfc=从线 mail_move=搬去： mail_eexists=讯息已不存在！ -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_title=阅读电邮 view_desc=$2中的消息$1 @@ -389,11 +374,9 @@ mailq_active=活性 mailq_deferred=递延 mailq_hold=保留选定 mailq_unhold=取消选择 -mailq_dir=Queue state flushq_title=冲洗队列 flushq_desc=使用命令$1强制尝试发送邮件。 -flushq_desc2=.. check the mail log for results qview_title=排队的消息 qview_desc=来自文件$1 @@ -601,10 +584,6 @@ opts_broken_sasl_auth_clients=处理不兼容的SMTP客户端？ sasl_opts=SMTP安全选项 sasl_noanonymous=拒绝匿名登录 sasl_noplaintext=拒绝纯文本登录 -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=延迟客户端登录失败？ sasl_recip=SMTP收件人限制 sasl_relay=SMTP中继限制 diff --git a/postfix/lang/zh_TW b/postfix/lang/zh_TW index 9e412d3a8..57ba04a7c 100644 --- a/postfix/lang/zh_TW +++ b/postfix/lang/zh_TW @@ -140,6 +140,7 @@ opts_mydomain_default=預設值 (由系統提供) opts_myhostname=這個郵件系統的網際網路主機名稱 opts_myhostname_default=預設值 (由系統提供) opts_mynetworks=本地端網路 +opts_mynetworks_default=預設值 (所有連接的網路) opts_bounce_notice_recipient=送給郵件管理者通知, 當退件從... opts_2bounce_notice_recipient=送給郵件管理者通知, 當 2 退件從... opts_delay_notice_recipient=送給郵件管理者通知, 當延遲遞送到... diff --git a/postfix/lang/zh_TW.auto b/postfix/lang/zh_TW.auto index 43c51c998..54164f9e8 100644 --- a/postfix/lang/zh_TW.auto +++ b/postfix/lang/zh_TW.auto @@ -125,13 +125,9 @@ smtpd_nomap2=尚未輸入限制發件人地址的地圖。 smtpd_map=允許中繼的地址 smtpd_map2=發件人地址限制 +opts_smtp_use_tls=使用TLS進行SMTP連接 opts_smtp_sasl_security_options=SASL安全選項 opts_smtp_tls_security_level=SMTP TLS 客戶端安全級別 -opts_inet_protocols=Internet protocols to enable -opts_inet_protocols_all=All available -opts_smtp_address_preference=Preferred SMTP client protocol -opts_smtp_address_preference_any=Either -opts_smtp_balance_inet_protocols=Validate SMTP client protocols opts_edebug=詳細記錄級別缺失或無效-必須是大於零的數字 @@ -184,20 +180,9 @@ acl_postfinger=可以檢查後綴配置嗎？ acl_manual=可以編輯配置文件嗎？ acl_dir=地圖文件的允許目錄 acl_bcc=可以編輯密件抄送映射嗎？ -acl_body=Can edit body checks? -acl_dependent=Can edit sender dependent transport maps? mail_move=搬去： mail_eexists=訊息已不存在！ -mail_qfile=Mail queue file -mail_qlast=Last retried at -mail_qdir=Mail queue status -mail_qdir_active=Active -mail_qdir_incoming=Incoming -mail_qdir_deferred=Deferred -mail_qdir_corrupt=Corrupt -mail_qdir_hold=On hold -mail_qdir_maildrop=Mail drop view_flush=沖洗 view_body=訊息文字 @@ -240,11 +225,9 @@ mailq_active=活性 mailq_deferred=遞延 mailq_hold=保留選定 mailq_unhold=取消選擇 -mailq_dir=Queue state flushq_title=沖洗隊列 flushq_desc=使用命令$1強制嘗試發送郵件。 -flushq_desc2=.. check the mail log for results qview_title=排隊的消息 qview_desc=來自文件$1 @@ -452,10 +435,6 @@ opts_broken_sasl_auth_clients=處理不兼容的SMTP客戶端？ sasl_opts=SMTP安全選項 sasl_noanonymous=拒絕匿名登錄 sasl_noplaintext=拒絕純文本登錄 -sasl_noactive=Reject Disallow subject to active (non-dictionary) attack -sasl_nodictionary=Reject methods subject to passive (dictionary) attack -sasl_forward_secrecy=Only allow methods that support forward secrecy -sasl_mutual_auth=Only allow methods that provide mutual authentication opts_smtpd_delay_reject=延遲客戶端登錄失敗？ sasl_recip=SMTP收件人限制 sasl_relay=SMTP中繼限制 diff --git a/postgresql/lang/de b/postgresql/lang/de index a48621ab5..4c318d191 100644 --- a/postgresql/lang/de +++ b/postgresql/lang/de @@ -16,7 +16,6 @@ index_add=Neue Datenbank erstellen. index_users=Benutzer, Gruppen und Berechtigungen index_return=Datenbankliste index_esql=Das PostgreSQL-Clientprogramm $1 wurde auf Ihrem System nicht gefunden. Vielleicht ist PostgreSQL nicht installiert, oder Ihre Modulkonfiguration ist nicht korrekt. - index_ehba=Die PostgreSQL-Hostkonfigurationsdatei $1 wurde auf Ihrem System nicht gefunden. Vielleicht wurde PostgreSQL nicht initialisiert, oder Ihre Modulkonfiguration ist nicht korrekt. index_superuser=Das PostgreSQL-Clientprogramm psql konnte auf Ihrem System nicht ausgeführt werden. Vielleicht ist PostgreSQL nicht installiert, oder Ihre Modulkonfiguration ist nicht korrekt. index_eversion=Die PostgreSQL-Datenbank auf Ihrem System ist Version $1, aber Webmin unterstützt nur Versionen $2 und höher. @@ -194,6 +193,7 @@ view_match0=enthält view_match1=entspricht view_match2=enthält nicht view_match3=entspricht nicht +view_match4>größer als view_match5=kleiner als view_searchok=Suche view_searchhead=Suchergebnisse für $1 im Feld $2 .. @@ -229,6 +229,7 @@ newdb_template=Vorlagendatenbank newdb_notemplate=None user_title=PostgreSQL-Benutzer +user_vwarning>Dieser PostgreSQL-Benutzer ist die Administrationsanmeldung für die Virtualmin-Domain $1. Änderungen an den Einstellungen hier können Fehler in Virtualmin verursachen. user_ecannot=Sie dürfen Benutzer nicht bearbeiten user_name=Benutzername user_db=Kann Datenbanken erstellen? @@ -365,6 +366,7 @@ group_derr=Fehler beim Löschen der Gruppen group_enone=Keine Gruppen ausgewählt esql=SQL $1 fehlgeschlagen : $2 + log_start=PostgreSQL-Server gestartet log_stop=PostgreSQL-Server gestoppt log_db_create=Datenbank $1 erstellt @@ -633,4 +635,4 @@ seq_ecache=Fehlende oder ungültige Anzahl der Werte im Cache seq_ecannot=Sie sind nicht berechtigt, Sequenzen zu verwalten dgrant_err=Fehler beim Zurücksetzen der Berechtigungen -dgrant_enone=Keine Objekte ausgewählt +dgrant_enone=Keine Objekte ausgewählt \ No newline at end of file diff --git a/postgresql/lang/de.auto b/postgresql/lang/de.auto deleted file mode 100644 index 212cbf7c4..000000000 --- a/postgresql/lang/de.auto +++ /dev/null @@ -1,3 +0,0 @@ -view_match4=greater than - -user_vwarning=This PostgreSQL user is the administration login for Virtualmin domain $1. Changing any settings here may cause errors in Virtualmin. diff --git a/ppp-client/lang/de b/ppp-client/lang/de index bf9fca8c0..41459f6e5 100644 --- a/ppp-client/lang/de +++ b/ppp-client/lang/de @@ -101,4 +101,4 @@ log_delete=Gelöscht $1 log_init=Konfiguration initialisiert oder aktualisiert log_connect=Verbunden mit $1 log_fail=Fehler bei der Verbindung mit $1 -log_disconnect=Getrennt von $1 +log_disconnect=Getrennt von $1 \ No newline at end of file diff --git a/pptp-client/lang/de b/pptp-client/lang/de index 5312003f0..0a62d080c 100644 --- a/pptp-client/lang/de +++ b/pptp-client/lang/de @@ -26,6 +26,7 @@ disc_done=Tunnel $1 wurde erfolgreich getrennt. conn_err=Fehler beim Herstellen der Tunnelverbindung conn_egone=Tunnel existiert nicht mehr +conn_ealready=Bereits verbunden conn_einvalid=Fehlende Server-IP-Adresse in der Konfigurationsdatei conn_title=Verbindungstunnel conn_cmd=Eine PPTP-Verbindung wird mit dem Befehl $1 hergestellt .. @@ -108,4 +109,4 @@ log_conn=Tunnel $1 verbunden log_conn_l=Tunnel $1 verbunden mit lokaler Adresse $2 log_failed=Fehler beim Verbinden von Tunnel $1 log_disc=Tunnel $1 getrennt -log_opts=Globale PPP-Optionen bearbeitet +log_opts=Globale PPP-Optionen bearbeitet \ No newline at end of file diff --git a/pptp-client/lang/de.auto b/pptp-client/lang/de.auto deleted file mode 100644 index 815a4ae46..000000000 --- a/pptp-client/lang/de.auto +++ /dev/null @@ -1 +0,0 @@ -cone_ealready=Already connected diff --git a/pptp-server/lang/de b/pptp-server/lang/de index 14eda9241..2554abd57 100644 --- a/pptp-server/lang/de +++ b/pptp-server/lang/de @@ -149,4 +149,4 @@ acl_options=Kann Optionen bearbeiten? acl_secrets=Kann PPTP-Konten verwalten? acl_conns=Kann Verbindungen anzeigen? acl_stop=Kann den PPTP-Server stoppen und starten? -acl_apply=Kann Konfiguration anwenden? +acl_apply=Kann Konfiguration anwenden? \ No newline at end of file diff --git a/proc/lang/af.auto b/proc/lang/af.auto index 5236f20df..2df7ff4f0 100644 --- a/proc/lang/af.auto +++ b/proc/lang/af.auto @@ -17,8 +17,6 @@ index_loadname=CPU-las gemiddeldes: index_loadnums=$1 (1 min), $2 (5 min), $3 (15 min) index_cpuname=SVE-tipe: index_inzone=In sone $1 -index_core=$1 core -index_cores=$1 cores pid=ID owner=Eienaar diff --git a/proc/lang/ar.auto b/proc/lang/ar.auto index cca06ce2f..09f6e4b1c 100644 --- a/proc/lang/ar.auto +++ b/proc/lang/ar.auto @@ -17,8 +17,6 @@ index_loadname=متوسطات حمل وحدة المعالجة المركزية: index_loadnums=$1 (1 دقيقة) ،$2 (5 دقائق) ،$3 (15 دقيقة) index_cpuname=نوع وحدة المعالجة المركزية: index_inzone=في المنطقة$1 -index_core=$1 core -index_cores=$1 cores pid=هوية شخصية owner=صاحب diff --git a/proc/lang/be.auto b/proc/lang/be.auto index d946a5d45..897b77add 100644 --- a/proc/lang/be.auto +++ b/proc/lang/be.auto @@ -17,8 +17,6 @@ index_loadname=Сярэдняя нагрузка на працэсар: index_loadnums=$1 (1 мін), $2 (5 хвілін), $3 (15 хвілін) index_cpuname=Тып працэсара: index_inzone=У зоне $1 -index_core=$1 core -index_cores=$1 cores pid=Пасведчанне асобы owner=Уладальнік diff --git a/proc/lang/bg.auto b/proc/lang/bg.auto index 0b790da63..57aed2570 100644 --- a/proc/lang/bg.auto +++ b/proc/lang/bg.auto @@ -17,8 +17,6 @@ index_loadname=Средно за зареждане на процесора: index_loadnums=$1 (1 минути), $2 (5 минути), $3 (15 минути) index_cpuname=Тип на процесора: index_inzone=В зона $1 -index_core=$1 core -index_cores=$1 cores pid=документ за самоличност owner=собственик diff --git a/proc/lang/ca.auto b/proc/lang/ca.auto index 212c45453..4c2757abf 100644 --- a/proc/lang/ca.auto +++ b/proc/lang/ca.auto @@ -4,7 +4,5 @@ index_memburst=Memòria explosiva: index_memtf=$1 total / $2 gratuït index_memtfc=$1 total/$2 gratuït/$3 en memòria cau index_inzone=A la zona $1 -index_core=$1 core -index_cores=$1 cores freebsd_stime=Va començar diff --git a/proc/lang/cs.auto b/proc/lang/cs.auto index b39ad92ce..376f810d8 100644 --- a/proc/lang/cs.auto +++ b/proc/lang/cs.auto @@ -3,8 +3,6 @@ index_memswap=Výměnný prostor: index_memburst=Výbušná paměť: index_memtf=$1 celkem / $2 zdarma index_memtfc=Celkem $1 / $2 zdarma / $3 uloženo v mezipaměti -index_core=$1 core -index_cores=$1 cores sclass=Třída plánování IO sprio=IO priorita diff --git a/proc/lang/da.auto b/proc/lang/da.auto index e71799eea..48acc7cc0 100644 --- a/proc/lang/da.auto +++ b/proc/lang/da.auto @@ -17,8 +17,6 @@ index_loadname=CPU-belastning gennemsnit: index_loadnums=$1 (1 min), $2 (5 minutter), $3 (15 minutter) index_cpuname=CPU-type: index_inzone=I zone $1 -index_core=$1 core -index_cores=$1 cores pid=ID owner=Ejer diff --git a/proc/lang/de b/proc/lang/de index ae526054e..4850664c5 100644 --- a/proc/lang/de +++ b/proc/lang/de @@ -205,4 +205,4 @@ trace_change=Ändern windows_threads=Threads im Prozess -syslog_dmesg=Kernel-Meldungen +syslog_dmesg=Kernel-Meldungen \ No newline at end of file diff --git a/proc/lang/el.auto b/proc/lang/el.auto index bb69fd2a5..0d877a561 100644 --- a/proc/lang/el.auto +++ b/proc/lang/el.auto @@ -3,5 +3,3 @@ index_memswap=Ανταλλαγή χώρου: index_memburst=Μνήμη με δυνατότητα διάρρηξης: index_memtf=$1 σύνολο / $2 δωρεάν index_memtfc=$1 σύνολο / $2 δωρεάν / $3 αποθηκευμένη στην κρυφή μνήμη -index_core=$1 core -index_cores=$1 cores diff --git a/proc/lang/es.auto b/proc/lang/es.auto index 750fc45b6..4e41a8312 100644 --- a/proc/lang/es.auto +++ b/proc/lang/es.auto @@ -8,8 +8,6 @@ index_loadname=Promedios de carga de la CPU: index_loadnums=$1 (1 minutos), $2 (5 minutos), $3 (15 minutos) index_cpuname=Tipo de CPU: index_inzone=En la zona $1 -index_core=$1 core -index_cores=$1 cores stime=Empezado sclass=Clase de programación IO diff --git a/proc/lang/eu.auto b/proc/lang/eu.auto index 77e1a78df..bab50df23 100644 --- a/proc/lang/eu.auto +++ b/proc/lang/eu.auto @@ -17,8 +17,6 @@ index_loadname=PUZaren kargaren batez bestekoak: index_loadnums=$1 (1 min), $2 (5 min), $3 (15 min) index_cpuname=CPU mota: index_inzone=$1 zonaldean -index_core=$1 core -index_cores=$1 cores pid=NAN owner=Jabea diff --git a/proc/lang/fa.auto b/proc/lang/fa.auto index 81d273d82..997977be0 100644 --- a/proc/lang/fa.auto +++ b/proc/lang/fa.auto @@ -6,8 +6,6 @@ index_memtfc=$1 کل / $2 رایگان / $3 حافظه پنهان index_loadname=میانگین بار CPU: index_loadnums=$1 (1 دقیقه) ،$2 (5 دقیقه) ،$3 (15 دقیقه) index_cpuname=نوع CPU: -index_core=$1 core -index_cores=$1 cores sclass=کلاس برنامه ریزی IO sprio=اولویت IO diff --git a/proc/lang/fi.auto b/proc/lang/fi.auto index 2be079702..260d3f9c6 100644 --- a/proc/lang/fi.auto +++ b/proc/lang/fi.auto @@ -17,8 +17,6 @@ index_loadname=Prosessorin kuorman keskiarvot: index_loadnums=$1 (1 minuutti), $2 (5 minuuttia), $3 (15 minuuttia) index_cpuname=Prosessorin tyyppi: index_inzone=Alueella $1 -index_core=$1 core -index_cores=$1 cores pid=ID owner=Omistaja diff --git a/proc/lang/fr.auto b/proc/lang/fr.auto index e2fe91b4a..d7f313e6f 100644 --- a/proc/lang/fr.auto +++ b/proc/lang/fr.auto @@ -8,8 +8,6 @@ index_loadname=Moyennes de charge du processeur: index_loadnums=$1 (1 min), $2 (5 min), $3 (15 min) index_cpuname=Type de CPU: index_inzone=Dans la zone $1 -index_core=$1 core -index_cores=$1 cores stime=Commencé sclass=Classe de planification IO diff --git a/proc/lang/he.auto b/proc/lang/he.auto index a72e3b018..4ccc6b15b 100644 --- a/proc/lang/he.auto +++ b/proc/lang/he.auto @@ -17,8 +17,6 @@ index_loadname=ממוצעי עומס מעבד: index_loadnums=$1 (1 דק '), $2 (5 דקות), $3 (15 דקות) index_cpuname=סוג מעבד: index_inzone=באזור $1 -index_core=$1 core -index_cores=$1 cores pid=תעודת זהות owner=בעלים diff --git a/proc/lang/hr.auto b/proc/lang/hr.auto index b0cfabcad..529702657 100644 --- a/proc/lang/hr.auto +++ b/proc/lang/hr.auto @@ -17,8 +17,6 @@ index_loadname=CPU učitava prosjeke: index_loadnums=$1 (1 min), $2 (5 min), $3 (15 min) index_cpuname=Vrsta CPU-a: index_inzone=U zoni $1 -index_core=$1 core -index_cores=$1 cores pid=iskaznica owner=Vlasnik diff --git a/proc/lang/hu.auto b/proc/lang/hu.auto index ff7abe749..5dccc0e7f 100644 --- a/proc/lang/hu.auto +++ b/proc/lang/hu.auto @@ -6,8 +6,6 @@ index_memtfc=$1 összesen / $2 szabad / $3 gyorsítótárban index_loadname=CPU terhelés átlagai: index_loadnums=$1 (1 perc), $2 (5 perc), $3 (15 perc) index_cpuname=CPU típus: -index_core=$1 core -index_cores=$1 cores sclass=IO ütemezési osztály sprio=IO prioritás diff --git a/proc/lang/it.auto b/proc/lang/it.auto index abc97a2a3..e3035ccdb 100644 --- a/proc/lang/it.auto +++ b/proc/lang/it.auto @@ -3,5 +3,3 @@ index_memswap=Spazio di scambio: index_memburst=Memoria espandibile: index_memtf=$1 totale / $2 gratis index_memtfc=$1 totale / $2 libero / $3 memorizzato nella cache -index_core=$1 core -index_cores=$1 cores diff --git a/proc/lang/ja.auto b/proc/lang/ja.auto index dc21844c5..569fa9d30 100644 --- a/proc/lang/ja.auto +++ b/proc/lang/ja.auto @@ -3,8 +3,6 @@ index_memswap=スワップスペース: index_memburst=バースト可能なメモリ: index_memtf=合計 $1 / $2 空き index_memtfc=合計 $1 / $2 空き / $3 キャッシュ -index_core=$1 core -index_cores=$1 cores sclass=IOスケジューリングクラス sprio=IO優先度 diff --git a/proc/lang/ko.auto b/proc/lang/ko.auto index 9e5556023..7e2ccbf86 100644 --- a/proc/lang/ko.auto +++ b/proc/lang/ko.auto @@ -8,8 +8,6 @@ index_loadname=CPU로드 평균 : index_loadnums=$1 (1 분), $2 (5 분), $3 (15 분) index_cpuname=CPU 유형 : index_inzone=영역 $1 에서 -index_core=$1 core -index_cores=$1 cores stime=시작 sclass=IO 스케줄링 클래스 diff --git a/proc/lang/lt.auto b/proc/lang/lt.auto index 26b343eaa..4496bd6a9 100644 --- a/proc/lang/lt.auto +++ b/proc/lang/lt.auto @@ -17,8 +17,6 @@ index_loadname=CPU apkrovos vidurkiai: index_loadnums=$1 (1 min.), $2 (5 min.), $3 (15 min.) index_cpuname=CPU tipas: index_inzone=$1 zonoje -index_core=$1 core -index_cores=$1 cores pid=ID owner=Savininkas diff --git a/proc/lang/lv.auto b/proc/lang/lv.auto index 78705c7bb..213adb2bf 100644 --- a/proc/lang/lv.auto +++ b/proc/lang/lv.auto @@ -17,8 +17,6 @@ index_loadname=CPU slodzes vidējie lielumi: index_loadnums=$1 (1 minūtes), $2 (5 minūtes), $3 (15 minūtes) index_cpuname=CPU tips: index_inzone=Zonā $1 -index_core=$1 core -index_cores=$1 cores pid=ID owner=Īpašnieks diff --git a/proc/lang/ms.auto b/proc/lang/ms.auto index 5309279fe..9e30d078e 100644 --- a/proc/lang/ms.auto +++ b/proc/lang/ms.auto @@ -17,8 +17,6 @@ index_loadname=Purata beban CPU: index_loadnums=$1 (1 minit), $2 (5 minit), $3 (15 minit) index_cpuname=Jenis CPU: index_inzone=Dalam zon $1 -index_core=$1 core -index_cores=$1 cores pid=ID owner=Pemilik diff --git a/proc/lang/mt.auto b/proc/lang/mt.auto index 457854b46..51c44397f 100644 --- a/proc/lang/mt.auto +++ b/proc/lang/mt.auto @@ -17,8 +17,6 @@ index_loadname=Medji tat-tagħbija tas-CPU: index_loadnums=$1 (1 min), $2 (5 minuti), $3 (15 minuti) index_cpuname=Tip ta 'CPU: index_inzone=Fiż-żona $1 -index_core=$1 core -index_cores=$1 cores pid=ID owner=Sidha diff --git a/proc/lang/nl.auto b/proc/lang/nl.auto index 5078e1b05..ea40e1c6d 100644 --- a/proc/lang/nl.auto +++ b/proc/lang/nl.auto @@ -3,5 +3,3 @@ index_memswap=Ruimte ruilen: index_memburst=Burstable geheugen: index_memtf=$1 totaal / $2 gratis index_memtfc=$1 totaal / $2 vrij / $3 in cache -index_core=$1 core -index_cores=$1 cores diff --git a/proc/lang/no.auto b/proc/lang/no.auto index 0ffafd3b6..62dd23dc3 100644 --- a/proc/lang/no.auto +++ b/proc/lang/no.auto @@ -3,5 +3,3 @@ index_memswap=Bytt plass: index_memburst=Burstable minne: index_memtf=$1 totalt / $2 gratis index_memtfc=$1 totalt / $2 ledig / $3 bufret -index_core=$1 core -index_cores=$1 cores diff --git a/proc/lang/pl.auto b/proc/lang/pl.auto index 0aaa30369..646b56e31 100644 --- a/proc/lang/pl.auto +++ b/proc/lang/pl.auto @@ -3,5 +3,3 @@ index_memswap=Zamień miejsce: index_memburst=Pamięć impulsowa: index_memtf=$1 łącznie / $2 za darmo index_memtfc=Łącznie $1 / $2 wolne / $3 w pamięci podręcznej -index_core=$1 core -index_cores=$1 cores diff --git a/proc/lang/pt.auto b/proc/lang/pt.auto index dd655a8fe..a9fc1b282 100644 --- a/proc/lang/pt.auto +++ b/proc/lang/pt.auto @@ -8,8 +8,6 @@ index_loadname=Médias de carga da CPU: index_loadnums=$1 (1 minutos), $2 (5 minutos), $3 (15 minutos) index_cpuname=Tipo de CPU: index_inzone=Na zona $1 -index_core=$1 core -index_cores=$1 cores stime=Começado sclass=Classe de agendamento de E / S diff --git a/proc/lang/pt_BR.auto b/proc/lang/pt_BR.auto index 265caf16c..f0922938e 100644 --- a/proc/lang/pt_BR.auto +++ b/proc/lang/pt_BR.auto @@ -3,5 +3,3 @@ index_memswap=Trocar espaço: index_memburst=Memória expansível: index_memtf=$1 total / $2 grátis index_memtfc=$1 total / $2 livres / $3 em cache -index_core=$1 core -index_cores=$1 cores diff --git a/proc/lang/ro.auto b/proc/lang/ro.auto index 2aa5986b4..d2cc36021 100644 --- a/proc/lang/ro.auto +++ b/proc/lang/ro.auto @@ -17,8 +17,6 @@ index_loadname=Medii de încărcare pentru procesor: index_loadnums=$1 (1 minute), $2 (5 minute), $3 (15 minute) index_cpuname=Tip CPU: index_inzone=În zona $1 -index_core=$1 core -index_cores=$1 cores pid=ID-ul owner=Proprietar diff --git a/proc/lang/ru.auto b/proc/lang/ru.auto index 8e35afe40..4be07c2ba 100644 --- a/proc/lang/ru.auto +++ b/proc/lang/ru.auto @@ -3,5 +3,3 @@ index_memswap=Место подкачки: index_memburst=Взрывная память: index_memtf=$1 всего / $2 бесплатно index_memtfc=Всего $1 / $2 свободно / $3 в кэше -index_core=$1 core -index_cores=$1 cores diff --git a/proc/lang/sk.auto b/proc/lang/sk.auto index 90ef5f854..f449c6db0 100644 --- a/proc/lang/sk.auto +++ b/proc/lang/sk.auto @@ -17,8 +17,6 @@ index_loadname=Priemer zaťaženia procesora: index_loadnums=$1 (1 min.), $2 (5 min.), $3 (15 min.) index_cpuname=Typ CPU: index_inzone=V zóne $1 -index_core=$1 core -index_cores=$1 cores pid=ID owner=vlastník diff --git a/proc/lang/sl.auto b/proc/lang/sl.auto index 46670a7f2..d1409c198 100644 --- a/proc/lang/sl.auto +++ b/proc/lang/sl.auto @@ -17,8 +17,6 @@ index_loadname=CPU obremenitve povprečja: index_loadnums=$1 (1 min), $2 (5 min), $3 (15 min) index_cpuname=Vrsta CPU-ja: index_inzone=V coni $1 -index_core=$1 core -index_cores=$1 cores pid=ID owner=Lastnik diff --git a/proc/lang/sv.auto b/proc/lang/sv.auto index d909f63f0..f16573b2b 100644 --- a/proc/lang/sv.auto +++ b/proc/lang/sv.auto @@ -8,8 +8,6 @@ index_loadname=CPU-medelvärden: index_loadnums=$1 (1 min), $2 (5 min), $3 (15 minuter) index_cpuname=CPU-typ: index_inzone=I zon $1 -index_core=$1 core -index_cores=$1 cores stime=Satte igång sclass=IO schemaläggningsklass diff --git a/proc/lang/th.auto b/proc/lang/th.auto index 1f09c48c8..834ec8966 100644 --- a/proc/lang/th.auto +++ b/proc/lang/th.auto @@ -17,8 +17,6 @@ index_loadname=ค่าเฉลี่ยโหลด CPU: index_loadnums=$1 (1 นาที), $2 (5 นาที), $3 (15 นาที) index_cpuname=ประเภท CPU: index_inzone=ในโซน $1 -index_core=$1 core -index_cores=$1 cores pid=ID owner=เจ้าของ diff --git a/proc/lang/tr.auto b/proc/lang/tr.auto index d877e612d..3e40c7785 100644 --- a/proc/lang/tr.auto +++ b/proc/lang/tr.auto @@ -8,8 +8,6 @@ index_loadname=CPU yük ortalamaları: index_loadnums=$1 (1 dk.), $2 (5 dk.), $3 (15 dk.) index_cpuname=CPU türü: index_inzone=$1 bölgesinde -index_core=$1 core -index_cores=$1 cores sclass=IO zamanlama sınıfı sprio=ES önceliği diff --git a/proc/lang/uk.auto b/proc/lang/uk.auto index a88a70586..7703efc44 100644 --- a/proc/lang/uk.auto +++ b/proc/lang/uk.auto @@ -8,8 +8,6 @@ index_loadname=Середнє завантаження процесора: index_loadnums=$1 (1 хв.), $2 (5 хв.), $3 (15 хв.) index_cpuname=Тип процесора: index_inzone=У зоні $1 -index_core=$1 core -index_cores=$1 cores stime=Почав sclass=Клас планування IO diff --git a/proc/lang/ur.auto b/proc/lang/ur.auto index 342c6fdba..6f80bda2d 100644 --- a/proc/lang/ur.auto +++ b/proc/lang/ur.auto @@ -17,8 +17,6 @@ index_loadname=اوسطا CPU: index_loadnums=$1 (1 منٹ) ،$2 (5 منٹ) ،$3 (15 منٹ) index_cpuname=سی پی یو کی قسم: index_inzone=زون$1 میں -index_core=$1 core -index_cores=$1 cores pid=ID owner=مالک diff --git a/proc/lang/vi.auto b/proc/lang/vi.auto index 38f523840..ae4eaa82c 100644 --- a/proc/lang/vi.auto +++ b/proc/lang/vi.auto @@ -17,8 +17,6 @@ index_loadname=Trung bình tải CPU: index_loadnums=$1 (1 phút), $2 (5 phút), $3 (15 phút) index_cpuname=Loại CPU: index_inzone=Trong khu vực $1 -index_core=$1 core -index_cores=$1 cores pid=TÔI owner=Chủ nhân diff --git a/proc/lang/zh.auto b/proc/lang/zh.auto index 029aa6bc5..de8bb9f33 100644 --- a/proc/lang/zh.auto +++ b/proc/lang/zh.auto @@ -8,8 +8,6 @@ index_loadname=平均CPU负载： index_loadnums=$1（1分钟）， $2（5分钟）， $3（15分钟） index_cpuname=CPU类型： index_inzone=在 $1区域中 -index_core=$1 core -index_cores=$1 cores stime=已开始 sclass=IO调度类 diff --git a/proc/lang/zh_TW.auto b/proc/lang/zh_TW.auto index f5a3cf053..8dd72d0a6 100644 --- a/proc/lang/zh_TW.auto +++ b/proc/lang/zh_TW.auto @@ -8,8 +8,6 @@ index_loadname=平均CPU負載： index_loadnums=$1（1分鐘）， $2（5分鐘）， $3（15分鐘） index_cpuname=CPU類型： index_inzone=在 $1區域 -index_core=$1 core -index_cores=$1 cores stime=已開始 sclass=IO調度類 diff --git a/proftpd/lang/af.auto b/proftpd/lang/af.auto index 26f5887db..fa7100031 100644 --- a/proftpd/lang/af.auto +++ b/proftpd/lang/af.auto @@ -27,8 +27,6 @@ index_global=Globale konfigurasie index_create=Skep virtuele bediener index_version=ProFTPd weergawe $1 index_proftpd=proftpd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Kon nie $1 stoor nie @@ -39,7 +37,6 @@ type_3=Toegangsbeheer type_4=diverse type_5=Gebruiker en groep type_6=verifikasie -type_7=SSL Options virt_title=Virtuele bedieneropsies virt_header1=Vir $1 @@ -383,19 +380,6 @@ mod_readme_display=Stel die gebruiker in kennis van die readme-lêers wat ooreen mod_readme_none=Geen mod_readme_edisplay=Ontbrekende leeslêerpatroon -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Kon nie FTP-bediener begin nie start_einetd=U kan nie die bediener-dememon begin in die inetd-modus nie. @@ -426,7 +410,6 @@ ftpindex_addlimit=Voeg opsies per opdrag by vir .. ftpindex_header2=$1 in $2 ftpindex_return=opsies per lêergids ftpindex_header=Vir $1 -ftpindex_cmds=FTP commands find_err=Kon nie opsielêers vind nie find_eanon=Anonieme FTP word nie op enige virtuele bediener opgestel nie diff --git a/proftpd/lang/ar.auto b/proftpd/lang/ar.auto index c4fa294da..dc5c033f9 100644 --- a/proftpd/lang/ar.auto +++ b/proftpd/lang/ar.auto @@ -27,8 +27,6 @@ index_global=التكوين العام index_create=إنشاء خادم افتراضي index_version=إصدار ProFTPd$1 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for efailed=فشل في حفظ$1 @@ -39,7 +37,6 @@ type_3=صلاحية التحكم صلاحية الدخول type_4=متنوع type_5=المستخدم والمجموعة type_6=المصادقة -type_7=SSL Options virt_title=خيارات الخادم الظاهري virt_header1=ل 1 @@ -383,19 +380,6 @@ mod_readme_display=إعلام المستخدم بملفات التمهيدي ا mod_readme_none=لا يوجد mod_readme_edisplay=نمط ملفات المستند التمهيدي مفقود -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=فشل بدء تشغيل خادم FTP start_einetd=لا يمكنك بدء البرنامج الخفي للخادم عندما تكون في وضع inetd. @@ -426,7 +410,6 @@ ftpindex_addlimit=إضافة خيارات لكل أمر لـ .. ftpindex_header2=$1 في$2 ftpindex_return=ملف خيارات لكل دليل ftpindex_header=ل 1 -ftpindex_cmds=FTP commands find_err=فشل في العثور على ملفات الخيارات find_eanon=لم يتم إعداد FTP المجهول في أي خادم ظاهري diff --git a/proftpd/lang/be.auto b/proftpd/lang/be.auto index 208eeff99..f81865900 100644 --- a/proftpd/lang/be.auto +++ b/proftpd/lang/be.auto @@ -27,8 +27,6 @@ index_global=Глабальная канфігурацыя index_create=Стварыце віртуальны сервер index_version=Версія ProFTPd $1 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Не ўдалося захаваць $1 @@ -39,7 +37,6 @@ type_3=Кіраванне доступам type_4=Рознае type_5=Карыстальнік і група type_6=Аўтэнтыфікацыя -type_7=SSL Options virt_title=Параметры віртуальнага сервера virt_header1=Для $1 @@ -383,19 +380,6 @@ mod_readme_display=Паведаміць карыстачу пра файлы Rea mod_readme_none=Не mod_readme_edisplay=Адсутнічае шаблон файлаў readme -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Не атрымалася запусціць FTP-сервер start_einetd=Вы не можаце запусціць дэман сервера ў рэжыме inetd. @@ -426,7 +410,6 @@ ftpindex_addlimit=Дадайце параметры для каманды для ftpindex_header2=$1 у $2 ftpindex_return=файл з варыянтамі каталога ftpindex_header=Для $1 -ftpindex_cmds=FTP commands find_err=Не атрымалася знайсці файлы опцый find_eanon=Ананімны FTP не ўсталёўваецца на любым віртуальным серверы diff --git a/proftpd/lang/bg.auto b/proftpd/lang/bg.auto index 568c0b4cc..b0d311d8f 100644 --- a/proftpd/lang/bg.auto +++ b/proftpd/lang/bg.auto @@ -27,8 +27,6 @@ index_global=Глобална конфигурация index_create=Създайте виртуален сървър index_version=ProFTPd версия $1 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for efailed=$1 запазване не бе успешно @@ -39,7 +37,6 @@ type_3=Контрол на достъпа type_4=Разни type_5=Потребител и група type_6=заверка -type_7=SSL Options virt_title=Опции за виртуален сървър virt_header1=За $1 @@ -383,19 +380,6 @@ mod_readme_display=Уведомете потребителя за съвпаде mod_readme_none=Нито един mod_readme_edisplay=Липсва шаблон на файлове за readme -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=FTP сървърът не стартира start_einetd=Не можете да стартирате демон на сървъра, когато сте в режим inetd. @@ -426,7 +410,6 @@ ftpindex_addlimit=Добавете опции за команда за .. ftpindex_header2=$1 в $2 ftpindex_return=файл с опции за директория ftpindex_header=За $1 -ftpindex_cmds=FTP commands find_err=Неуспешно намиране на файлове с опции find_eanon=Anonymous FTP не е инсталиран на нито един виртуален сървър diff --git a/proftpd/lang/ca.auto b/proftpd/lang/ca.auto deleted file mode 100644 index 186d8da90..000000000 --- a/proftpd/lang/ca.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options - -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - -ftpindex_cmds=FTP commands diff --git a/proftpd/lang/cs.auto b/proftpd/lang/cs.auto index 5be08cff2..08e55c503 100644 --- a/proftpd/lang/cs.auto +++ b/proftpd/lang/cs.auto @@ -2,10 +2,6 @@ index_applymsg2=Klepnutím na toto tlačítko použijete aktuální konfiguraci index_stop=Zastavte server index_stopmsg=Klepnutím na toto tlačítko zastavíte FTP server, který zabrání připojení nových FTP klientů. index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options dir_header5=Globálně pro adresář $1 @@ -24,19 +20,6 @@ mod_core_firstcdt=Vždy ukazovat mod_ls_options=Možnosti seznamu adresářů mod_ls_strict=Přepsat možnosti uživatele? -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - stop_err=Zastavení FTP serveru se nezdařilo stop_einetd=V režimu inetd nemůžete zastavit démona serveru. stop_erun=Nefunguje @@ -44,8 +27,6 @@ stop_erun=Nefunguje apply_err=Nepodařilo se použít konfiguraci FTP apply_egone=Už neběží -ftpindex_cmds=FTP commands - log_anonc=Nastavit anonymní FTP pro server $1 log_anons=Překonfigurovaný anonymní FTP pro server $1 log_anond=Odstraněn anonymní FTP pro server $1 diff --git a/proftpd/lang/da.auto b/proftpd/lang/da.auto index 7a53cafa2..245ff82b8 100644 --- a/proftpd/lang/da.auto +++ b/proftpd/lang/da.auto @@ -27,8 +27,6 @@ index_global=Global konfiguration index_create=Opret virtuel server index_version=ProFTPd version $1 index_proftpd=proftpd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Kunne ikke gemme $1 @@ -39,7 +37,6 @@ type_3=Adgangskontrol type_4=Diverse type_5=Bruger og gruppe type_6=Godkendelse -type_7=SSL Options virt_title=Valg af virtuel server virt_header1=For $1 @@ -383,19 +380,6 @@ mod_readme_display=Underret brugeren om readme-filer, der matcher mod_readme_none=Ingen mod_readme_edisplay=Manglende readme-filer mønster -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Kunne ikke starte FTP-server start_einetd=Du kan ikke starte serverdemonen, når du er i inetd-tilstand. @@ -426,7 +410,6 @@ ftpindex_addlimit=Tilføj valgmuligheder per kommando for .. ftpindex_header2=$1 i $2 ftpindex_return=pr. katalogindstillingsfil ftpindex_header=For $1 -ftpindex_cmds=FTP commands find_err=Kunne ikke finde indstillingsfiler find_eanon=Anonym FTP er ikke opsat på nogen virtuel server diff --git a/proftpd/lang/de b/proftpd/lang/de index dbae00445..79147e517 100644 --- a/proftpd/lang/de +++ b/proftpd/lang/de @@ -468,4 +468,4 @@ log_apply=Änderungen angewendet eafter=Überprüfung der Konfiguration fehlgeschlagen : $1 Änderungen wurden nicht gespeichert. proftpd_apply=Änderungen anwenden proftpd_stop=ProFTPd stoppen -proftpd_start=ProFTPd starten +proftpd_start=ProFTPd starten \ No newline at end of file diff --git a/proftpd/lang/el.auto b/proftpd/lang/el.auto index 05128ff6d..eb2e53503 100644 --- a/proftpd/lang/el.auto +++ b/proftpd/lang/el.auto @@ -27,8 +27,6 @@ index_global=Παγκόσμια διαμόρφωση index_create=Δημιουργία εικονικού διακομιστή index_version=ProFTPd έκδοση $1 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Αποτυχία αποθήκευσης $1 @@ -39,7 +37,6 @@ type_3=Έλεγχος πρόσβασης type_4=Διάφορα type_5=Χρήστη και Ομάδα type_6=Αυθεντικοποίηση -type_7=SSL Options virt_title=Επιλογές εικονικού διακομιστή virt_header1=Για το $1 @@ -383,19 +380,6 @@ mod_readme_display=Ειδοποιήστε το χρήστη των αρχείω mod_readme_none=Κανένας mod_readme_edisplay=Λείπει πρότυπο αρχείων readme -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Δεν ήταν δυνατή η εκκίνηση του διακομιστή FTP start_einetd=Δεν μπορείτε να ξεκινήσετε τον δαίμονα διακομιστή όταν βρίσκεστε σε λειτουργία inetd. @@ -426,7 +410,6 @@ ftpindex_addlimit=Προσθέστε τις επιλογές ανά εντολή ftpindex_header2=$1 στο $2 ftpindex_return=ανά αρχείο καταλόγου ανά φάκελο ftpindex_header=Για το $1 -ftpindex_cmds=FTP commands find_err=Αποτυχία εύρεσης αρχείων επιλογών find_eanon=Το ανώνυμο FTP δεν έχει ρυθμιστεί σε κανέναν εικονικό διακομιστή diff --git a/proftpd/lang/es.auto b/proftpd/lang/es.auto index 6bfb5092b..1c74dfe2c 100644 --- a/proftpd/lang/es.auto +++ b/proftpd/lang/es.auto @@ -2,10 +2,6 @@ index_applymsg2=Haga clic en este botón para aplicar la configuración actual d index_stop=Detener servidor index_stopmsg=Haga clic en este botón para detener el servidor FTP, lo que evitará que se conecten nuevos clientes FTP. index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options dir_header5=Para el directorio $1 globalmente @@ -34,19 +30,6 @@ mod_ls_strict=¿Anular opciones de usuario? mod_auth_home=Directorio de inicio mod_auth_none=Ninguna -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - stop_err=Error al detener el servidor FTP stop_einetd=No puede detener el demonio del servidor cuando está en modo inetd. stop_erun=No corras @@ -54,8 +37,6 @@ stop_erun=No corras apply_err=Error al aplicar la configuración FTP apply_egone=Ya no se ejecuta -ftpindex_cmds=FTP commands - log_anonc=Configurar FTP anónimo para el servidor $1 log_anons=FTP anónimo reconfigurado para el servidor $1 log_anond=FTP anónimo eliminado para el servidor $1 diff --git a/proftpd/lang/eu.auto b/proftpd/lang/eu.auto index 4acba09e4..f58cd84ac 100644 --- a/proftpd/lang/eu.auto +++ b/proftpd/lang/eu.auto @@ -27,8 +27,6 @@ index_global=Konfigurazio globala index_create=Sortu zerbitzari birtuala index_version=ProFTPd $1 bertsioa index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Ezin izan da $1 gordetzea @@ -39,7 +37,6 @@ type_3=Sarbide-kontrola type_4=Denetarik type_5=Erabiltzailea eta Taldea type_6=Autentifikazioa -type_7=SSL Options virt_title=Zerbitzari birtualaren aukerak virt_header1=$1 erako @@ -383,19 +380,6 @@ mod_readme_display=Erabiltzaileei irakurritako fitxategiak bat datozela jakinara mod_readme_none=Bat ere ez mod_readme_edisplay=Irakurtzeko fitxategi eredua falta da -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Huts egin du FTP zerbitzaria abiaraztean start_einetd=Ezin duzu zerbitzariaren demona abiarazi inetd moduan dagoenean. @@ -426,7 +410,6 @@ ftpindex_addlimit=Gehitu komando bakoitzeko aukerak .. ftpindex_header2=$1 $2 an ftpindex_return=direktorio bakoitzeko aukeren fitxategia ftpindex_header=$1 erako -ftpindex_cmds=FTP commands find_err=Ezin izan da aukerak fitxategiak aurkitu find_eanon=FTP anonimoak ez du zerbitzari birtualetan konfiguratuta diff --git a/proftpd/lang/fa.auto b/proftpd/lang/fa.auto index b780a1142..531c23c9e 100644 --- a/proftpd/lang/fa.auto +++ b/proftpd/lang/fa.auto @@ -2,27 +2,10 @@ index_applymsg2=برای توقف تنظیمات فعلی با توقف و شر index_stop=توقف سرور index_stopmsg=برای متوقف کردن سرور FTP روی این دکمه کلیک کنید ، که از اتصال هر مشتری جدید FTP جلوگیری می کند. index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options mod_core_uid=UID mod_core_firstcdt=همیشه نشان می دهد -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - stop_err=سرور FTP متوقف نشد stop_einetd=در حالت inetd نمی توانید سیم کارت سرور را متوقف کنید. stop_erun=در حال اجرا نیست @@ -30,8 +13,6 @@ stop_erun=در حال اجرا نیست apply_err=پیکربندی FTP انجام نشد apply_egone=دیگر در حال اجرا نیست -ftpindex_cmds=FTP commands - proftpd_apply=تغغیرات را اعمال کن proftpd_stop=ProFTPd را متوقف کنید proftpd_start=ProFTPd را شروع کنید diff --git a/proftpd/lang/fi.auto b/proftpd/lang/fi.auto index 3bd584632..4d53b3a83 100644 --- a/proftpd/lang/fi.auto +++ b/proftpd/lang/fi.auto @@ -27,8 +27,6 @@ index_global=Globaali kokoonpano index_create=Luo virtuaalipalvelin index_version=ProFTPd-versio $1 index_proftpd=proftpd -index_dlheader=Add Options -index_dlmode=Add options for efailed=$1 tallennus epäonnistui @@ -39,7 +37,6 @@ type_3=Kulunvalvonta type_4=sekalainen type_5=Käyttäjä ja ryhmä type_6=Authentication -type_7=SSL Options virt_title=Virtuaalipalvelimen asetukset virt_header1=$1 : lle @@ -383,19 +380,6 @@ mod_readme_display=Ilmoita käyttäjälle readme-tiedostojen vastaavuudesta mod_readme_none=Ei mitään mod_readme_edisplay=Puuttuu readme-tiedostokuvio -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=FTP-palvelimen käynnistäminen epäonnistui start_einetd=Et voi käynnistää palvelindeemonia inetd-tilassa. @@ -426,7 +410,6 @@ ftpindex_addlimit=Lisää komentokohtaisia vaihtoehtoja .. ftpindex_header2=$1 $2 : ssa ftpindex_return=hakemistokohtaisten asetusten tiedosto ftpindex_header=$1 : lle -ftpindex_cmds=FTP commands find_err=Asetustiedostojen löytäminen epäonnistui find_eanon=Anonyymiä FTP: tä ei ole määritetty missään virtuaalipalvelimessa diff --git a/proftpd/lang/fr.auto b/proftpd/lang/fr.auto deleted file mode 100644 index 186d8da90..000000000 --- a/proftpd/lang/fr.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options - -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - -ftpindex_cmds=FTP commands diff --git a/proftpd/lang/he.auto b/proftpd/lang/he.auto index 8e1f8a639..58a484e0e 100644 --- a/proftpd/lang/he.auto +++ b/proftpd/lang/he.auto @@ -27,8 +27,6 @@ index_global=תצורה גלובלית index_create=צור שרת וירטואלי index_version=גרסת ProFTPd $1 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for efailed=שמירת $1 נכשלה @@ -39,7 +37,6 @@ type_3=בקרת גישה type_4=שונות type_5=משתמש וקבוצה type_6=אימות -type_7=SSL Options virt_title=אפשרויות שרת וירטואלי virt_header1=בשביל 1 @@ -383,19 +380,6 @@ mod_readme_display=הודע למשתמש על התאמת קבצי readme mod_readme_none=אף אחד mod_readme_edisplay=דפוס קבצי readme חסר -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=הפעלת שרת FTP נכשלה start_einetd=אינך יכול להפעיל את דמון השרת במצב כניסה. @@ -426,7 +410,6 @@ ftpindex_addlimit=הוסף אפשרויות לפקודה עבור .. ftpindex_header2=$1 ב- $2 ftpindex_return=קובץ אפשרויות לספריה ftpindex_header=בשביל 1 -ftpindex_cmds=FTP commands find_err=לא נמצא קבצי אפשרויות find_eanon=FTP אנונימי אינו מוגדר בשום שרת וירטואלי diff --git a/proftpd/lang/hr.auto b/proftpd/lang/hr.auto index c5eba168f..5074c65b4 100644 --- a/proftpd/lang/hr.auto +++ b/proftpd/lang/hr.auto @@ -27,8 +27,6 @@ index_global=Globalna konfiguracija index_create=Stvaranje virtualnog poslužitelja index_version=ProFTPd verzija $1 index_proftpd=ProFTPD -index_dlheader=Add Options -index_dlmode=Add options for efailed=Spremanje $1 nije uspjelo @@ -39,7 +37,6 @@ type_3=Kontrola pristupa type_4=razni type_5=Korisnik i grupa type_6=Ovjera -type_7=SSL Options virt_title=Opcije virtualnog poslužitelja virt_header1=Za $1 @@ -383,19 +380,6 @@ mod_readme_display=Obavijesti korisnika o readme datotekama koje odgovaraju mod_readme_none=nijedan mod_readme_edisplay=Nedostaje obrazac datoteka readme datoteke -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Nije uspio pokretanje FTP poslužitelja start_einetd=Ne možete pokrenuti demon poslužitelja kad je u inetd modu. @@ -426,7 +410,6 @@ ftpindex_addlimit=Dodajte opcije po naredbi za .. ftpindex_header2=$1 u $2 ftpindex_return=datoteka opcija po direktoriju ftpindex_header=Za $1 -ftpindex_cmds=FTP commands find_err=Pronalaženje datoteka s opcijama nije uspjelo find_eanon=Anonymous FTP nije postavljanje na bilo koji virtualni poslužitelj diff --git a/proftpd/lang/hu.auto b/proftpd/lang/hu.auto index c1162ee68..dce1cf33a 100644 --- a/proftpd/lang/hu.auto +++ b/proftpd/lang/hu.auto @@ -2,10 +2,6 @@ index_applymsg2=Kattintson erre a gombra az aktuális konfiguráció alkalmazás index_stop=Stop Server index_stopmsg=Kattintson erre a gombra az FTP-kiszolgáló leállításához, amely megakadályozza az új FTP-ügyfelek csatlakozását. index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options manual_etest=Konfigurációs fájl hibája észlelve : $1 @@ -18,19 +14,6 @@ mod_core_firstcdt=Mindig mutassa mod_ls_options=Könyvtárak listájának lehetőségei mod_ls_strict=Felülírja a felhasználói lehetőségeket? -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - stop_err=Az FTP-kiszolgáló megállítása nem sikerült stop_einetd=Inetd módban nem állíthatja le a szerver démont. stop_erun=Nem fut @@ -38,8 +21,6 @@ stop_erun=Nem fut apply_err=Nem sikerült alkalmazni az FTP-konfigurációt apply_egone=Már nem fut -ftpindex_cmds=FTP commands - log_anonc=Anonim FTP beállítása a (z) $1 kiszolgálóra log_anons=A (z) $1 kiszolgáló névtelen FTP-je újrakonfigurálva log_anond=A (z) $1 szerver névtelen FTP-jét törölte diff --git a/proftpd/lang/it.auto b/proftpd/lang/it.auto index 38915d467..965fde8ca 100644 --- a/proftpd/lang/it.auto +++ b/proftpd/lang/it.auto @@ -3,10 +3,6 @@ index_stop=Arresta il server index_stopmsg=Fare clic su questo pulsante per arrestare il server FTP, che impedirà a tutti i nuovi client FTP di connettersi. index_version=Versione ProFTPd $1 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options dir_header5=Per la directory $1 a livello globale @@ -39,19 +35,6 @@ mod_ls_strict=Sostituire le opzioni utente? mod_auth_home=Home directory mod_auth_none=Nessuna -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - stop_err=Impossibile arrestare il server FTP stop_einetd=Non è possibile arrestare il daemon del server in modalità inetd. stop_erun=Non correndo @@ -59,8 +42,6 @@ stop_erun=Non correndo apply_err=Impossibile applicare la configurazione FTP apply_egone=Non più in esecuzione -ftpindex_cmds=FTP commands - log_anonc=Configura FTP anonimo per il server $1 log_anons=FTP anonimo riconfigurato per il server $1 log_anond=FTP anonimo eliminato per il server $1 diff --git a/proftpd/lang/ja.auto b/proftpd/lang/ja.auto index cbead77f9..75400de4c 100644 --- a/proftpd/lang/ja.auto +++ b/proftpd/lang/ja.auto @@ -2,26 +2,9 @@ index_applymsg2=このボタンをクリックして、ProFTPDを停止して再 index_stop=サーバーを停止 index_stopmsg=このボタンをクリックしてFTPサーバーを停止します。これにより、新しいFTPクライアントが接続できなくなります。 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options mod_core_firstcdt=いつも見せる -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - stop_err=FTPサーバーを停止できませんでした stop_einetd=inetdモードでは、サーバーデーモンを停止できません。 stop_erun=走っていない @@ -29,8 +12,6 @@ stop_erun=走っていない apply_err=FTP構成の適用に失敗しました apply_egone=もう走っていない -ftpindex_cmds=FTP commands - log_anonc=サーバー $1の匿名FTPをセットアップします log_anons=サーバー $1の匿名FTPを再構成しました log_anond=サーバー $1の匿名FTPを削除しました diff --git a/proftpd/lang/ko.auto b/proftpd/lang/ko.auto index 9371e2f69..7297314ea 100644 --- a/proftpd/lang/ko.auto +++ b/proftpd/lang/ko.auto @@ -1,22 +1,3 @@ index_applymsg2=ProFTPD를 중지했다가 다시 시작하여 현재 구성을 적용하려면이 버튼을 클릭하십시오. -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options mod_core_firstcdt=항상 보여 - -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - -ftpindex_cmds=FTP commands diff --git a/proftpd/lang/lt.auto b/proftpd/lang/lt.auto index d77ce1868..2f952f2b6 100644 --- a/proftpd/lang/lt.auto +++ b/proftpd/lang/lt.auto @@ -27,8 +27,6 @@ index_global=Visuotinė konfigūracija index_create=Sukurkite virtualų serverį index_version=„ProFTPd“ versija $1 index_proftpd=„ProFTPd“ -index_dlheader=Add Options -index_dlmode=Add options for efailed=Nepavyko išsaugoti $1 @@ -39,7 +37,6 @@ type_3=Prieigos kontrolė type_4=Įvairūs type_5=Vartotojas ir grupė type_6=Autentifikavimas -type_7=SSL Options virt_title=Virtualiojo serverio parinktys virt_header1=$1 @@ -383,19 +380,6 @@ mod_readme_display=Praneškite vartotojui apie „readme“ failų atitikimą mod_readme_none=Nė vienas mod_readme_edisplay=Trūksta „readme“ failų modelio -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Nepavyko paleisti FTP serverio start_einetd=Negalite paleisti serverio demono, kai įjungtas įvesties režimas. @@ -426,7 +410,6 @@ ftpindex_addlimit=Pridėti kiekvienos komandos parinktis .. ftpindex_header2=$1 $2 ftpindex_return=katalogų parinkčių failas ftpindex_header=$1 -ftpindex_cmds=FTP commands find_err=Nepavyko rasti parinkčių failų find_eanon=Jokiame virtualiame serveryje nenustatyta anoniminė FTP diff --git a/proftpd/lang/lv.auto b/proftpd/lang/lv.auto index 0c16c1600..fda7f1d39 100644 --- a/proftpd/lang/lv.auto +++ b/proftpd/lang/lv.auto @@ -27,8 +27,6 @@ index_global=Globālā konfigurācija index_create=Izveidojiet virtuālo serveri index_version=ProFTPd versija $1 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Neizdevās saglabāt $1 @@ -39,7 +37,6 @@ type_3=Piekļuves kontrole type_4=Dažādi type_5=Lietotājs un grupa type_6=Autentifikācija -type_7=SSL Options virt_title=Virtuālā servera opcijas virt_header1=$1 @@ -383,19 +380,6 @@ mod_readme_display=Paziņojiet lietotājam par readme failu atbilstību mod_readme_none=Nav mod_readme_edisplay=Trūkst readme failu parauga -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Neizdevās startēt FTP serveri start_einetd=Iekšējā režīmā nevar palaist servera dēmonu. @@ -426,7 +410,6 @@ ftpindex_addlimit=Pievienojiet katras komandas iespējas ftpindex_header2=$1 $2 ftpindex_return=direktoriju opciju fails ftpindex_header=$1 -ftpindex_cmds=FTP commands find_err=Neizdevās atrast iespēju failus find_eanon=Nevienā virtuālajā serverī nav iestatīta anonīma FTP diff --git a/proftpd/lang/ms.auto b/proftpd/lang/ms.auto index 448db20e4..cad157f0f 100644 --- a/proftpd/lang/ms.auto +++ b/proftpd/lang/ms.auto @@ -27,8 +27,6 @@ index_global=Konfigurasi Global index_create=Buat pelayan maya index_version=Versi ProFTPd $1 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Gagal menyimpan $1 @@ -39,7 +37,6 @@ type_3=Kawalan Akses type_4=Pelbagai type_5=Pengguna dan Kumpulan type_6=Pengesahan -type_7=SSL Options virt_title=Pilihan Pelayan Maya virt_header1=Untuk $1 @@ -383,19 +380,6 @@ mod_readme_display=Beritahu pengguna fail readme matching mod_readme_none=Tiada mod_readme_edisplay=Fail fail readme hilang -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Gagal memulakan pelayan FTP start_einetd=Anda tidak boleh memulakan daemon pelayan apabila dalam mod inetd. @@ -426,7 +410,6 @@ ftpindex_addlimit=Tambah pilihan per-perintah untuk .. ftpindex_header2=$1 dalam $2 ftpindex_return=fail pilihan per direktori ftpindex_header=Untuk $1 -ftpindex_cmds=FTP commands find_err=Gagal mencari fail pilihan find_eanon=FTP tanpa nama tidak disediakan dalam mana-mana pelayan maya diff --git a/proftpd/lang/mt.auto b/proftpd/lang/mt.auto index 6ee20dab2..5b6bb8e99 100644 --- a/proftpd/lang/mt.auto +++ b/proftpd/lang/mt.auto @@ -27,8 +27,6 @@ index_global=Konfigurazzjoni Globali index_create=Oħloq server virtwali index_version=Verżjoni ProFTPd $1 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Ma rnexxielux jiffranka $1 @@ -39,7 +37,6 @@ type_3=Kontroll tal-Aċċess type_4=Diversi type_5=Utent u Grupp type_6=Awtentikazzjoni -type_7=SSL Options virt_title=Għażliet ta 'Server Virtwali virt_header1=Għal $1 @@ -383,19 +380,6 @@ mod_readme_display=Avża lill-utent dwar l-allinjament ta 'fajls readme mod_readme_none=Xejn mod_readme_edisplay=Nieqes il-mudell ta 'fajls readme -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Naqset milli tibda server FTP start_einetd=Ma tistax tibda d-daemon tas-server meta tkun fil-mod inetd. @@ -426,7 +410,6 @@ ftpindex_addlimit=Żid għażliet għal kull kmand għal .. ftpindex_header2=$1 f' $2 ftpindex_return=fajl b'għażliet ta 'direttorju ftpindex_header=Għal $1 -ftpindex_cmds=FTP commands find_err=Naqset milli ssib fajls ta 'għażliet find_eanon=FTP anonimu m'huwa installat fl-ebda server virtwali diff --git a/proftpd/lang/nl.auto b/proftpd/lang/nl.auto deleted file mode 100644 index 186d8da90..000000000 --- a/proftpd/lang/nl.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options - -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - -ftpindex_cmds=FTP commands diff --git a/proftpd/lang/no.auto b/proftpd/lang/no.auto deleted file mode 100644 index 186d8da90..000000000 --- a/proftpd/lang/no.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options - -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - -ftpindex_cmds=FTP commands diff --git a/proftpd/lang/pl.auto b/proftpd/lang/pl.auto deleted file mode 100644 index 186d8da90..000000000 --- a/proftpd/lang/pl.auto +++ /dev/null @@ -1,19 +0,0 @@ -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options - -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - -ftpindex_cmds=FTP commands diff --git a/proftpd/lang/pt.auto b/proftpd/lang/pt.auto index db9c18e41..b506da994 100644 --- a/proftpd/lang/pt.auto +++ b/proftpd/lang/pt.auto @@ -27,8 +27,6 @@ index_global=Configuração Global index_create=Criar servidor virtual index_version=Versão ProFTPd $1 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Falha ao salvar $1 @@ -39,7 +37,6 @@ type_3=Controle de acesso type_4=Diversos type_5=Usuário e Grupo type_6=Autenticação -type_7=SSL Options virt_title=Opções do servidor virtual virt_header1=Por 1 @@ -383,19 +380,6 @@ mod_readme_display=Notificar o usuário sobre os arquivos leia-me correspondente mod_readme_none=Nenhum mod_readme_edisplay=Padrão de arquivos leia-me ausentes -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Falha ao iniciar o servidor FTP start_einetd=Você não pode iniciar o daemon do servidor quando estiver no modo inetd. @@ -426,7 +410,6 @@ ftpindex_addlimit=Adicione opções por comando para .. ftpindex_header2=$1 em $2 ftpindex_return=arquivo de opções por diretório ftpindex_header=Por 1 -ftpindex_cmds=FTP commands find_err=Falha ao encontrar arquivos de opções find_eanon=O FTP anônimo não está configurado em nenhum servidor virtual diff --git a/proftpd/lang/pt_BR.auto b/proftpd/lang/pt_BR.auto index 3cbd3c72f..c566ff997 100644 --- a/proftpd/lang/pt_BR.auto +++ b/proftpd/lang/pt_BR.auto @@ -1,20 +1 @@ index_applymsg2=Clique neste botão para aplicar a configuração atual parando e reiniciando o ProFTPD. -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options - -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - -ftpindex_cmds=FTP commands diff --git a/proftpd/lang/ro.auto b/proftpd/lang/ro.auto index f1592b0d5..5e22a3dcc 100644 --- a/proftpd/lang/ro.auto +++ b/proftpd/lang/ro.auto @@ -27,8 +27,6 @@ index_global=Configurare globală index_create=Creați un server virtual index_version=Versiunea ProFTPd $1 index_proftpd=Proftpd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Salvarea $1 nu a reușit @@ -39,7 +37,6 @@ type_3=Controlul accesului type_4=Diverse type_5=Utilizator și grup type_6=Autentificare -type_7=SSL Options virt_title=Opțiuni server virtual virt_header1=Pentru $1 @@ -383,19 +380,6 @@ mod_readme_display=Notifica utilizatorului potrivirea fișierelor readme mod_readme_none=Nici unul mod_readme_edisplay=Lipsește modelul fișierelor readme -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Eroare la pornirea serverului FTP start_einetd=Nu puteți porni demonul serverului în modul inetd. @@ -426,7 +410,6 @@ ftpindex_addlimit=Adăugați opțiuni per comandă pentru .. ftpindex_header2=$1 în $2 ftpindex_return=fișier opțiuni per director ftpindex_header=Pentru $1 -ftpindex_cmds=FTP commands find_err=Nu a putut găsi fișierele cu opțiuni find_eanon=FTP anonim nu este configurat în niciun server virtual diff --git a/proftpd/lang/ru.auto b/proftpd/lang/ru.auto index c54412fbc..49e0d067d 100644 --- a/proftpd/lang/ru.auto +++ b/proftpd/lang/ru.auto @@ -2,10 +2,6 @@ index_applymsg2=Нажмите эту кнопку, чтобы применит index_stop=Остановить сервер index_stopmsg=Нажмите эту кнопку, чтобы остановить сервер FTP, что предотвратит подключение любых новых клиентов FTP. index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options dir_header5=Для каталога $1 глобально @@ -23,19 +19,6 @@ mod_core_firstcdt=Показывайте всегда mod_ls_options=Параметры списка каталогов mod_ls_strict=Переопределить параметры пользователя? -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - stop_err=Не удалось остановить FTP-сервер stop_einetd=Вы не можете остановить серверный демон в режиме inetd. stop_erun=Не бегать @@ -43,8 +26,6 @@ stop_erun=Не бегать apply_err=Не удалось применить конфигурацию FTP apply_egone=Больше не работает -ftpindex_cmds=FTP commands - log_anonc=Настроить анонимный FTP для сервера $1 log_anons=Переконфигурированный анонимный FTP для сервера $1 log_anond=Удален анонимный FTP для сервера $1 diff --git a/proftpd/lang/sk.auto b/proftpd/lang/sk.auto index b722bfdee..f5dcc806f 100644 --- a/proftpd/lang/sk.auto +++ b/proftpd/lang/sk.auto @@ -27,8 +27,6 @@ index_global=Globálna konfigurácia index_create=Vytvorte virtuálny server index_version=Verzia ProFTPd $1 index_proftpd=proftpd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Uloženie $1 zlyhalo @@ -39,7 +37,6 @@ type_3=Riadenie prístupu type_4=Zmiešaný type_5=Používateľ a skupina type_6=Overenie -type_7=SSL Options virt_title=Možnosti virtuálneho servera virt_header1=Pre $1 @@ -383,19 +380,6 @@ mod_readme_display=Upozorniť používateľa na prispôsobenie súborov readme mod_readme_none=nikto mod_readme_edisplay=Chýba vzor súborov readme -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Server FTP sa nepodarilo spustiť start_einetd=V režime inetd nemôžete spustiť serverového démona. @@ -426,7 +410,6 @@ ftpindex_addlimit=Pridajte možnosti príkazu pre príkaz .. ftpindex_header2=$1 v $2 ftpindex_return=súbor možností adresára ftpindex_header=Pre $1 -ftpindex_cmds=FTP commands find_err=Nepodarilo sa nájsť súbory možností find_eanon=Anonymný FTP nie je nastavený na žiadnom virtuálnom serveri diff --git a/proftpd/lang/sl.auto b/proftpd/lang/sl.auto index 9795151a2..bc284d24b 100644 --- a/proftpd/lang/sl.auto +++ b/proftpd/lang/sl.auto @@ -27,8 +27,6 @@ index_global=Globalna konfiguracija index_create=Ustvari virtualni strežnik index_version=ProFTPd različica $1 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for efailed=$1 ni bilo mogoče shraniti @@ -39,7 +37,6 @@ type_3=Nadzor dostopa type_4=Razno type_5=Uporabnik in skupina type_6=Preverjanje pristnosti -type_7=SSL Options virt_title=Možnosti virtualnega strežnika virt_header1=Za $1 @@ -383,19 +380,6 @@ mod_readme_display=Obvesti uporabnika datotek readme, ki se ujemajo mod_readme_none=Noben mod_readme_edisplay=Manjka vzorec datotek readme -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=FTP strežnika ni bilo mogoče zagnati start_einetd=Demona strežnika ne morete zagnati, če ste v načinu inetd. @@ -426,7 +410,6 @@ ftpindex_addlimit=Dodajte možnosti po ukazu za .. ftpindex_header2=$1 v $2 ftpindex_return=datoteka z možnostmi v imeniku ftpindex_header=Za $1 -ftpindex_cmds=FTP commands find_err=Ni bilo mogoče najti datotek z možnostmi find_eanon=Anonimni FTP ni nameščen v nobenem virtualnem strežniku diff --git a/proftpd/lang/sv.auto b/proftpd/lang/sv.auto index 1fd659cca..5ea0705e1 100644 --- a/proftpd/lang/sv.auto +++ b/proftpd/lang/sv.auto @@ -27,8 +27,6 @@ index_global=Global konfiguration index_create=Skapa virtuell server index_version=ProFTPd-version $1 index_proftpd=proftpd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Det gick inte att spara $1 @@ -39,7 +37,6 @@ type_3=Åtkomstkontroll type_4=Diverse type_5=Användare och grupp type_6=autentisering -type_7=SSL Options virt_title=Virtuella serveralternativ virt_header1=För $1 @@ -383,19 +380,6 @@ mod_readme_display=Meddela användaren om readme-filer som matchar mod_readme_none=Ingen mod_readme_edisplay=Mönster av readme-filer saknas -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Det gick inte att starta FTP-servern start_einetd=Du kan inte starta serverdemonen i inetd-läge. @@ -426,7 +410,6 @@ ftpindex_addlimit=Lägg till alternativ per kommando för .. ftpindex_header2=$1 i $2 ftpindex_return=per katalogalternativfil ftpindex_header=För $1 -ftpindex_cmds=FTP commands find_err=Det gick inte att hitta alternativfiler find_eanon=Anonym FTP är inte inställd på någon virtuell server diff --git a/proftpd/lang/th.auto b/proftpd/lang/th.auto index b7be24c7f..3e5faceb6 100644 --- a/proftpd/lang/th.auto +++ b/proftpd/lang/th.auto @@ -27,8 +27,6 @@ index_global=การกำหนดค่าทั่วโลก index_create=สร้างเซิร์ฟเวอร์เสมือน index_version=ProFTPd รุ่น $1 index_proftpd=ProFTPD -index_dlheader=Add Options -index_dlmode=Add options for efailed=ไม่สามารถบันทึก $1 ได้ @@ -39,7 +37,6 @@ type_3=การควบคุมการเข้าถึง type_4=เบ็ดเตล็ด type_5=ผู้ใช้และกลุ่ม type_6=การรับรอง -type_7=SSL Options virt_title=ตัวเลือกเซิร์ฟเวอร์เสมือน virt_header1=สำหรับ $1 @@ -383,19 +380,6 @@ mod_readme_display=แจ้งผู้ใช้ของไฟล์ readme mod_readme_none=ไม่มี mod_readme_edisplay=รูปแบบไฟล์ readme ที่ขาดหายไป -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=ไม่สามารถเริ่มเซิร์ฟเวอร์ FTP start_einetd=คุณไม่สามารถเริ่มเซิร์ฟเวอร์ daemon ได้เมื่ออยู่ในโหมด inetd @@ -426,7 +410,6 @@ ftpindex_addlimit=เพิ่มตัวเลือกต่อคำสั ftpindex_header2=$1 ใน $2 ftpindex_return=ไฟล์ตัวเลือกต่อไดเรกทอรี ftpindex_header=สำหรับ $1 -ftpindex_cmds=FTP commands find_err=ไม่พบไฟล์ตัวเลือก find_eanon=Anonymous FTP ไม่ได้ตั้งค่าในเซิร์ฟเวอร์เสมือนใด ๆ diff --git a/proftpd/lang/tr.auto b/proftpd/lang/tr.auto index 557660a7d..b9b86b50b 100644 --- a/proftpd/lang/tr.auto +++ b/proftpd/lang/tr.auto @@ -27,8 +27,6 @@ index_global=Global Yapılandırma index_create=Sanal sunucu oluştur index_version=ProFTPd sürümü $1 index_proftpd=proftpd -index_dlheader=Add Options -index_dlmode=Add options for efailed=$1 kaydedilemedi @@ -39,7 +37,6 @@ type_3=Giriş kontrolu type_4=Çeşitli type_5=Kullanıcı ve Grup type_6=Kimlik Doğrulama -type_7=SSL Options virt_title=Sanal Sunucu Seçenekleri virt_header1=1 için @@ -383,19 +380,6 @@ mod_readme_display=Benioku dosyalarını eşleştiren kullanıcıyı bilgilendir mod_readme_none=Yok mod_readme_edisplay=Benioku dosyaları kalıbı eksik -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=FTP sunucusu başlatılamadı start_einetd=İnetd modundayken sunucu arka plan programını başlatamazsınız. @@ -426,7 +410,6 @@ ftpindex_addlimit=İçin komut başına seçenekler ekle .. ftpindex_header2=$2 içinde $1 ftpindex_return=dizin başına seçenekler dosyası ftpindex_header=1 için -ftpindex_cmds=FTP commands find_err=Seçenek dosyaları bulunamadı find_eanon=Anonim FTP herhangi bir sanal sunucuda ayarlanmamış diff --git a/proftpd/lang/uk.auto b/proftpd/lang/uk.auto index 4d355c9d3..120dc3174 100644 --- a/proftpd/lang/uk.auto +++ b/proftpd/lang/uk.auto @@ -2,10 +2,6 @@ index_applymsg2=Натисніть цю кнопку, щоб застосува index_stop=Зупинити сервер index_stopmsg=Натисніть цю кнопку, щоб зупинити FTP-сервер, що запобіжить підключенню нових клієнтів FTP. index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options dir_header5=Для каталогу $1 у всьому світі @@ -23,19 +19,6 @@ mod_core_firstcdt=Завжди показуй mod_ls_options=Параметри списку каталогів mod_ls_strict=Переотримати параметри користувача? -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - stop_err=Не вдалося зупинити FTP-сервер stop_einetd=Ви не можете зупинити демон сервера в режимі inetd. stop_erun=Не працює @@ -43,8 +26,6 @@ stop_erun=Не працює apply_err=Не вдалося застосувати конфігурацію FTP apply_egone=Більше не працює -ftpindex_cmds=FTP commands - log_anonc=Установіть анонімний FTP для сервера $1 log_anons=Переконфігурований анонімний FTP для сервера $1 log_anond=Видалено анонімний FTP для сервера $1 diff --git a/proftpd/lang/ur.auto b/proftpd/lang/ur.auto index f7ea525ea..bb5ace012 100644 --- a/proftpd/lang/ur.auto +++ b/proftpd/lang/ur.auto @@ -27,8 +27,6 @@ index_global=عالمی تشکیل index_create=ورچوئل سرور بنائیں index_version=ProFTPd ورژن$1 index_proftpd=پرو ایف ٹی پی ڈی -index_dlheader=Add Options -index_dlmode=Add options for efailed=$1 کو بچانے میں ناکام @@ -39,7 +37,6 @@ type_3=رسائی کنٹرول type_4=متفرق type_5=صارف اور گروپ type_6=توثیق -type_7=SSL Options virt_title=ورچوئل سرور کے اختیارات virt_header1=$1 کے لئے @@ -383,19 +380,6 @@ mod_readme_display=ریڈیم فائلوں کے ملاپ کے صارف کو مط mod_readme_none=کوئی نہیں mod_readme_edisplay=ریڈیم فائلوں کا نمونہ غائب ہے -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=ایف ٹی پی سرور شروع کرنے میں ناکام start_einetd=inetd وضع میں ہونے پر آپ سرور ڈیمون شروع نہیں کرسکتے ہیں۔ @@ -426,7 +410,6 @@ ftpindex_addlimit=کے لئے فی کمانڈ آپشنز شامل کریں .. ftpindex_header2=$2 میں$1 ftpindex_return=فی ڈائریکٹری اختیارات فائل ftpindex_header=$1 کے لئے -ftpindex_cmds=FTP commands find_err=اختیارات کی فائلیں ڈھونڈنے میں ناکام find_eanon=گمنام ایف ٹی پی کسی بھی ورچوئل سرور میں سیٹ اپ نہیں ہے diff --git a/proftpd/lang/vi.auto b/proftpd/lang/vi.auto index cd32a5fb2..f42277f3e 100644 --- a/proftpd/lang/vi.auto +++ b/proftpd/lang/vi.auto @@ -27,8 +27,6 @@ index_global=Cấu hình Toàn cầu index_create=Tạo máy chủ ảo index_version=Phiên bản ProFTPd $1 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for efailed=Không thể lưu $1 @@ -39,7 +37,6 @@ type_3=Kiểm soát truy cập type_4=Điều khoản khác type_5=Người dùng và nhóm type_6=Xác thực -type_7=SSL Options virt_title=Tùy chọn máy chủ ảo virt_header1=Cho 1 @@ -383,19 +380,6 @@ mod_readme_display=Thông báo cho người dùng về tập tin readme phù h mod_readme_none=không ai mod_readme_edisplay=Thiếu mẫu tập tin readme -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - start_err=Không thể khởi động máy chủ FTP start_einetd=Bạn không thể khởi động trình nền máy chủ khi ở chế độ inetd. @@ -426,7 +410,6 @@ ftpindex_addlimit=Thêm tùy chọn cho mỗi lệnh cho .. ftpindex_header2=$1 trong $2 ftpindex_return=tập tin tùy chọn mỗi thư mục ftpindex_header=Cho 1 -ftpindex_cmds=FTP commands find_err=Không thể tìm thấy tệp tùy chọn find_eanon=FTP ẩn danh không được thiết lập trong bất kỳ máy chủ ảo nào diff --git a/proftpd/lang/zh.auto b/proftpd/lang/zh.auto index 28c9f2bef..681514611 100644 --- a/proftpd/lang/zh.auto +++ b/proftpd/lang/zh.auto @@ -2,10 +2,6 @@ index_applymsg2=单击此按钮可通过停止并重新启动ProFTPD来应用当 index_stop=停止服务器 index_stopmsg=单击此按钮停止FTP服务器，这将阻止任何新的FTP客户端连接。 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options dir_header5=对于全局目录 $1 @@ -37,19 +33,6 @@ mod_ls_strict=覆盖用户选项？ mod_auth_home=主目录 mod_auth_none=没有 -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - stop_err=停止FTP服务器失败 stop_einetd=在inetd模式下，无法停止服务器守护程序。 stop_erun=没有运行 @@ -57,8 +40,6 @@ stop_erun=没有运行 apply_err=无法应用FTP配置 apply_egone=不再运行 -ftpindex_cmds=FTP commands - log_anonc=为服务器 $1设置匿名FTP log_anons=为服务器 $1重新配置了匿名FTP log_anond=删除服务器 $1的匿名FTP diff --git a/proftpd/lang/zh_TW.auto b/proftpd/lang/zh_TW.auto index fb73809c6..fae1ddc04 100644 --- a/proftpd/lang/zh_TW.auto +++ b/proftpd/lang/zh_TW.auto @@ -2,31 +2,12 @@ index_applymsg2=單擊此按鈕可通過停止並重新啟動ProFTPD來應用當 index_stop=停止服務器 index_stopmsg=單擊此按鈕停止FTP服務器，這將阻止任何新的FTP客戶端連接。 index_proftpd=ProFTPd -index_dlheader=Add Options -index_dlmode=Add options for - -type_7=SSL Options mod_core_firstcdt=總是顯示 -mod_tls_engine=Enable SSL encryption? -mod_tls_required=SSL required? -mod_tls_ctrl=For control channel -mod_tls_auth=For authentication -mod_tls_authdata=For authentication and data -mod_tls_file=SSL certificate file -mod_tls_efile=SSL certificate file does not exist! -mod_tls_key=SSL key file -mod_tls_ekey=SSL key file does not exist! -mod_tls_ca=SSL CA certificate file -mod_tls_eca=SSL CA certificate file does not exist! -mod_tls_none=None set - stop_err=停止FTP服務器失敗 stop_einetd=在inetd模式下，無法停止服務器守護程序。 stop_erun=沒有運行 apply_err=無法應用FTP配置 apply_egone=不再運行 - -ftpindex_cmds=FTP commands diff --git a/pserver/lang/af.auto b/pserver/lang/af.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/af.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/ar.auto b/pserver/lang/ar.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/ar.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/be.auto b/pserver/lang/be.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/be.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/bg.auto b/pserver/lang/bg.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/bg.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/ca b/pserver/lang/ca index 041540e27..4857c88d6 100644 --- a/pserver/lang/ca +++ b/pserver/lang/ca @@ -16,10 +16,8 @@ index_deactdesc2=El servidor CVS està configurat per executar-se a partir de $1 index_return=a l'índex del mòdul index_asuser=Executa com a usuari: index_einetroot=Atenció! L'arrel CVS establerta a la configuració del mòdul no coincideix amb l'arrel del servidor CVS. Això es pot arreglar desactivant i reactivant el servidor CVS. - setup_einet=No sembla que ni inetd ni xinetd estiguin instal·lats al sistema. setup_ecannot=No tens permís per configurar el servidor CVS - passwd_title=Usuaris CVS passwd_header=Usuaris dels servidor CVS passwd_desc=El servidor CVS permetrà els usuaris llistats a sota d'entrar i accedir al repositori. Si un usuari no llistat hi intenta entrar, en lloc d'això el servidor pot intentar verficar la contrasenya de l'usuari contra el fitxer de contrasenyes del sistema, depenent de la configuració del servidor. @@ -31,7 +29,6 @@ passwd_sync_modify=Actualitza un usuari CVS quan l'usuari Unix corresponent es m passwd_sync_delete=Suprimeix un usuari CVS quan l'usuari Unix corresponent se suprimeixi. passwd_return=a la llista d'usuaris passwd_ecannot=No tens permís per gestionar els usuaris CVS - edit_title1=Creació d'Usuari CVS edit_title2=Edició d'Usuari CVS edit_header=Detalls de l'usuari CVS @@ -43,13 +40,11 @@ edit_pass1=Deixa-ho tal com està edit_pass0=Estableix a... edit_unix=Accedeix els fitxers com l'usuari Unix edit_unixdef=Igual que l'usuari - save_err=No s'ha pogut desar l'usuari CVS save_euser=Hi falta el nom d'usuari o bé és invàlid save_eunix=Hi falta el nom de l'usuari Unix o bé és invàlid save_ecopy=L'usuari Unix del qual s'ha de copiar la contrasenya no existeix save_emd5=La contrasenya Unix està en format MD5 - access_title=Control d'Accés d'Usuaris access_header=Usuaris CVS de només lectura access_readers1=No hi ha cap usuari només lectura @@ -60,11 +55,9 @@ access_desc=Si un usuari està a totes dues llistes de lectura i escriptura, se access_err=No s'ha pogut desar el control d'accés d'usuaris access_euser=L'usuari '$1' no existeix access_ecannot=No tens permís per editar el control d'accés d'usuaris - cvsweb_title=Fullejat del Repositori cvsweb_ecmd=No s'ha trobat al sistema l'ordre CVS $1. Aquesta ordre és necessària per a visualitzar el repositori CVS. cvsweb_ecannot=No tens permís per veure el repositori CVS - config_title=Configuració del Servidor config_header=Opcions de configuració del servidor config_auth=Verifica els usuaris contra el fitxer de contrasenyes del sistema @@ -87,7 +80,6 @@ config_lock=Directori de bloqueigs de fitxers config_err=No s'ha pogut desar la configuració del servidor config_elock=Hi falta el directori de bloqueigs de fitxers o bé és invàlid config_ecannot=No tens permís per editar la configuració del servidor - log_setup=S'ha configurat el Servidor CVS log_activate=S'ha activat el servidor CVS log_deactivate=S'ha desactivat el servidor CVS @@ -96,13 +88,11 @@ log_delete_user=S'ha suprimit l'usuari $1 log_modify_user=S'ha modificat l'usuari $1 log_access=S'ha canviat el control d'accés d'usuaris log_config=S'ha canviat la configuració del servidor - acl_passwd=Pot gestionar els usuaris CVS acl_access=Pot editar el control d'accés d'usuaris acl_config=Pot editar la configuració del servidor acl_cvsweb=Pot veure el repositori CVS acl_setup=Pot configurar inetd o xinetd per per executar el servidor CVS acl_init=Pot inicialitzar el repositori - init_err=No s'ha pogut inicialitzar el repositori init_ecannot=No tens permís per inicialitzar repositoris diff --git a/pserver/lang/cs b/pserver/lang/cs index 00572eaab..a6bb49bab 100644 --- a/pserver/lang/cs +++ b/pserver/lang/cs @@ -10,9 +10,7 @@ index_actdesc=CVS server je nastaven pro spuštění z $1 ve vašem systému, al index_deact=Deactivovat CVS server index_deactdesc=CVS server je nastaven pro spuštění z $1 ve vašem systému, a je navíc aktivní. Klepněte na toto tlačítko, pokud ho chcete deaktivovat a zakázat vzdáleným uživatelům přístup do vašeho CVS skladiště. index_return=úvodní stránka modulu - setup_einet=Vypadá to, že buď inetd nebo xinetd je ve vašem systému nainstalován - passwd_title=CVS uživatelé passwd_header=Uživatelé CVS serveru passwd_desc=CVS server umožní níže uvedeným uživatelům přihlášení a přístup do skladiště. Pokud se pokusí příhlásit uživatel, který není uveden v seznamu, server se namísto toho může pokusit ověřit heslo uživatele oproti systémovému souboru hesel, uvedeného v konfiguraci serveru. @@ -23,7 +21,6 @@ passwd_sync_create=Přidat nového CVS uživatele, pokud byl přidán Unix uživ passwd_sync_modify=Aktualizovat CVS uživatele, pokud byl odpovídající Unix uživatel modifikován. passwd_sync_delete=Smazat CVS uživatele, pokud byl odpovídající Unix uživatel smazán. passwd_return=seznam uživatelů - edit_title1=Vytvoření CVS uživatele edit_title2=Editace CVS uživatele edit_header=Detaily CVS uživatele @@ -35,13 +32,11 @@ edit_pass1=Opustit beze změn edit_pass0=Nastavit na.. edit_unix=Zpřístupnit soubory pro unix uživatele edit_unixdef=Shodné s uživatelským jménem - save_err=Chyba při ukládání CVS uživatele save_euser=Chybějící nebo nesprávné jméno uživatele save_eunix=Chybějící nebo nesprávný unix uživatel save_ecopy=Unix uživatel, od kterého se má kopírovat heslo, neexistuje save_emd5=Unix heslo, které se má kopírovat, je v MD5 formátu - access_title=Kontrola přístupu uživatele access_header=CVS uživatelé, kteří mají povolení pouze ke čtení access_readers1=CVS uživatelé, kteří nemají povolení pouze ke čtení @@ -51,10 +46,8 @@ access_writers0=Poze uživatelé uvedení v seznamu mohou zapisovat .. access_desc=Jestliže je uživatel jak v seznamu s povolením pouhého čtení tak s povolením pro zápis, bude povolen přístup pouze pro čtení. access_err=Chyba při ukládání kontroly přístupu uživatelů access_euser=Uživatel '$1' neexistuje - cvsweb_title=Prohlížení skaldiště cvsweb_ecmd=CVS příkaz $1 nebyl ve vašem systému nalezen. Tento příkaz je potřebný pro zobrazení CVS skladiště. - config_title=Konfigurace serveru config_header=Nastavení konfigurace serveru config_auth=Kontrolovat uživatele oproti systémovému souboru hesel? @@ -76,7 +69,6 @@ config_hist_R=Soubor odstraněn config_lock=Uzamčení adresáře se soubory config_err=Chyba při ukládání konfigurace serveru config_elock=Chybějící nebo nesprávné uzamčení adresáře se soubory - log_setup=Nastaven CVS server log_activate=Aktivován CVS server log_deactivate=Deaktivován CVS server diff --git a/pserver/lang/cs.auto b/pserver/lang/cs.auto deleted file mode 100644 index fcb5e2d12..000000000 --- a/pserver/lang/cs.auto +++ /dev/null @@ -1,26 +0,0 @@ -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_ecannot=You are not allowed to setup the CVS server - -passwd_ecannot=You are not allowed to manage CVS users - -access_ecannot=You are not allowed to edit user access control - -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_ecannot=You are not allowed to edit the server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/da.auto b/pserver/lang/da.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/da.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/de b/pserver/lang/de index 7928c9772..6828ccf45 100644 --- a/pserver/lang/de +++ b/pserver/lang/de @@ -16,10 +16,8 @@ index_deactdesc2=Der CVS-Server ist eingerichtet, um von $1 auf Ihrem System fü index_return=Modulindex index_asuser=Ausführen als Benutzer: index_einetroot=Achtung! Der CVS-Root, welcher in der Modulkonfiguration eingestellt ist, ist nicht der Root für den CVS-Server. Dies kann durch Deaktivieren und Reaktivieren des CVS-Server festgelegt werden. - setup_einet=Weder inetd noch xinetd scheint auf Ihrem System installiert zu sein. setup_ecannot=Sie sind nicht berechtigt, den CVS-Server einzurichten - passwd_title=CVS-Benutzer passwd_header=CVS-Server-Benutzer passwd_desc=Der CVS-Server können die unten aufgeführten Benutzer anmelden und auf das Repository zugreifen. Wenn eine nicht gelisteter Benutzer versucht sich anzumelden, versucht der Server das Passwort des Benutzers mit der System-Passwort-Datei stattdessen zu überprüfen, abhängig von der Serverkonfiguration. @@ -31,7 +29,6 @@ passwd_sync_modify=Aktualisiere einen CVS-Benutzer, wenn der entsprechende Unix passwd_sync_delete=Lösche eines CVS-Benutzer, wenn der entsprechende Unix Benutzer gelöscht wurde. passwd_return=Benutzerliste passwd_ecannot=Es ist Ihnen nicht erlaubt CVS-Benutzer zu verwalten - edit_title1=Erstelle CVS-Benutzer edit_title2=Editiere CVS-Benutzer edit_header=CVS-Benutzerdetails @@ -43,13 +40,11 @@ edit_pass1=Unverändert lassen edit_pass0=Setze auf.. edit_unix=Dateien als Unix-Benutzer zugreifen edit_unixdef=Gleiche wie Benutzername - save_err=Fehlgeschlagen CVS-Benutzer zu speichern save_euser=Fehlender oder ungültiger Benutzername save_eunix=Fehlender oder ungültiger Unix Benutzer save_ecopy=Unix-Benutzer, um Passwort aus zu kopieren, existiert nicht save_emd5=Unix-Passwort im MD5-Format kopieren - access_title=Benutzer-Zugangskontrolle access_header=Nur lesende CVS-Benutzer access_readers1=Keine nur-lese Benutzer @@ -60,11 +55,9 @@ access_desc=Wenn ein Benutzer sowohl in den Lese als auch in der Schreibe-Liste access_err=Fehlgeschlagen beim Speichern von User Access Control access_euser=Benutzer '$1' existiert nicht access_ecannot=Es ist Ihnen nicht erlaubt User Access Control zu editieren - cvsweb_title=Browse Repository cvsweb_ecmd=Der CVS-Befehl $1 wurde nicht auf Ihrem System gefunden. Dieser Befehl wird für die Anzeige der CVS-Repository benötigt. cvsweb_ecannot=Es ist Ihnen nicht erlaupt das CVS repository anzusehen - config_title=Server Konfiguration config_header=Server Konfigurationsoptionen config_auth=Prüfe Benutzer gegen System-Passwort-Datei? @@ -87,7 +80,6 @@ config_lock=Lock Datei Verzeichnis config_err=Fehlgeschlagen Serverkonfiguration zu speichern config_elock=Fehlendes oder ungültiges Lock-Datei-Verzeichnis config_ecannot=Sie sind nicht berechtigt, die Serverkonfiguration zu bearbeiten - log_setup=CVS-Server eingerichtet log_activate=Aktivierte CVS-Server log_deactivate=CVS-Server deaktiviert @@ -96,13 +88,11 @@ log_delete_user=Benutzer $1 gelöscht log_modify_user=Benutzer $1 modifiziert log_access=User Access Control geändert log_config=Geänderte Serverkonfiguration - acl_passwd=Kann CVS-Benutzer verwalten? acl_access=Kann die Benutzerzugriffssteuerung bearbeiten? acl_config=Kann Serverkonfiguration editieren? acl_cvsweb=Kann CVS repository anzeigen? acl_setup=Kann inetd oder xinetd einrichten, um CVS-Server auszuführen? acl_init=Kann repository initialisieren? - init_err=Fehlgeschlagen repository zu initialisieren init_ecannot=Es ist Ihnen nicht erlaubt ein repository zu initialisieren diff --git a/pserver/lang/el.auto b/pserver/lang/el.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/el.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/es b/pserver/lang/es index 62165bac3..60a7f3d1b 100644 --- a/pserver/lang/es +++ b/pserver/lang/es @@ -10,9 +10,7 @@ index_actdesc=El servidor CVS está configurado para ejecutarse desde $1 en su s index_deact=Desactivar servidor CVS index_deactdesc=El servidor CVS está configurado para ejecutarse desde $1 en su sistema, y está activo. Pulse este botón si desea desactivarlo y evitar que los usuarios remotos accedan a su repositorio CVS. index_return=índice del módulo - setup_einet=Ni inetd ni xinetd parecen estar instalados en tu sistema. - passwd_title=Usuarios CVS passwd_header=Usuarios de servidor CVS passwd_desc=El servidor CVS permitirá que los usuarios listados debajo hagan login y accedan al repositorio. Si un usuario no listado intenta hacer login, el servidor puede intentar de verificar la clave de acceso del usuario contra la clave de acceso del archivo de sistema en su lugar, dependiendo de la configuración del servidor. @@ -23,7 +21,6 @@ passwd_sync_create=Añadir un nuevo usuario CVS al añadir un usario Unix. passwd_sync_modify=Actualizar un servidor CVS cuando el correspondiente usuario Unix sea modificado. passwd_sync_delete=Borrar un usuario CVS cuando el correspondiente usuario Unix sea borrado. passwd_return=lista de usuarios - edit_title1=Crear Usuario de CVS edit_title2=Editar Usuario de CVS edit_header=Detalles de usuario de CVS @@ -35,13 +32,11 @@ edit_pass1=Dejar sin cambiar edit_pass0=Poner a... edit_unix=Acceder a archivos como usuario unix edit_unixdef=Igual que nombre de usuario - save_err=No pude salvar usuario de CVS save_euser=El nombre de usuario falta o es inválido save_eunix=El usuario de unix falta o es inválido save_ecopy=El usuario de unix de donde copiar la clave de acceso no existe save_emd5=La clave de acceso de Unix a copiar tiene formato MD5 - access_title=Control de Acceso de Usuario access_header=Usuarios de Sólo-lectura en CVS access_readers1=No hay usuarios sólo-lectura @@ -51,10 +46,8 @@ access_writers0=Sólo los usuarios listados pueden escribir... access_desc=Si un usuario está en ambas listas (lectura y escritura), tendrá sólo acceso de lectura. access_err=No pude salvar control de acceso de usuario access_euser=El usuario '$1' no existe - cvsweb_title=Navegar Repositorio cvsweb_ecmd=El comando $1 de CVS no fue hallado en su sistema. Este comando es necesario para ver el repositorio CVS. - config_title=Configuración de Servidor config_header=Opciones de configuración de servidor config_auth=¿Reviso usuario contra archivo de claves de acceso del sistema? @@ -76,7 +69,6 @@ config_hist_R=Archivo quitado config_lock=Directorio de archivos bloqueados config_err=No pude salvar configuración del servidor config_elock=Directorio de archivos bloqueados falta o no es válido - log_setup=Configurar servidor CVS log_activate=Servidor CVS activado log_deactivate=Servidor CVS desactivado diff --git a/pserver/lang/es.auto b/pserver/lang/es.auto deleted file mode 100644 index fcb5e2d12..000000000 --- a/pserver/lang/es.auto +++ /dev/null @@ -1,26 +0,0 @@ -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_ecannot=You are not allowed to setup the CVS server - -passwd_ecannot=You are not allowed to manage CVS users - -access_ecannot=You are not allowed to edit user access control - -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_ecannot=You are not allowed to edit the server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/eu.auto b/pserver/lang/eu.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/eu.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/fa.auto b/pserver/lang/fa.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/fa.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/fi.auto b/pserver/lang/fi.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/fi.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/fr b/pserver/lang/fr index db7c81a31..c134faec1 100644 --- a/pserver/lang/fr +++ b/pserver/lang/fr @@ -16,10 +16,8 @@ index_deactdesc2=Le serveur CVS est configuré pour s'exécuter depuis $1 sur vo index_return=à l'index des modules index_asuser=Exécuter en tant qu'utilisateur : index_einetroot=Avertissement ! : La racine CVS définie dans la configuration du module ne correspond pas à la racine du serveur CVS. Ce comportement peut être corrigé en désactivant et en réactivant le serveur CVS. - setup_einet=Ni inetd ni xinetd se semblent être installés sur votre système. setup_ecannot=Vous n'êtes pas autorisé à configurer le serveur CVS - passwd_title=Utilisateurs CVS passwd_header=Utilisateurs du serveur CVS passwd_desc=Le serveur CVS permettra aux utilisateurs répertoriés ci-dessous de se connecter et accéder au référentiel. Si un utilisateur non répertorié essaie de se connecter, le serveur peut à la place tenter de vérifier le mot de passe de l'utilisateur par rapport au fichier de mots de passe du système, selon la configuration du serveur. @@ -31,7 +29,6 @@ passwd_sync_modify=Mettre à jour un utilisateur CVS quand l'utilisateur Unix co passwd_sync_delete=Supprimer un utilisateur CVS quand l'utilisateur Unix correspondant est supprimé passwd_return=à la liste des utilisateurs passwd_ecannot=Vous n'êtes pas autorisé à gérer les utilisateurs - edit_title1=Création d'un utilisateur CVS edit_title2=Édition d'un utilisateur CVS edit_header=Détails de l'utilisateur CVS @@ -43,13 +40,11 @@ edit_pass1=Laisser inchangé edit_pass0=Définir à... edit_unix=Fichiers d'accès en tant qu'utilisateur Unix edit_unixdef=Les mêmes que le nom d'utilisateur - save_err=Impossible d'enregistrer l'utilisateur CVS save_euser=Nom d'utilisateur manquant ou invalide save_eunix=Utilisateur Unix manquant ou invalide save_ecopy=L'utilisateur Unix à partir duquel copier le mot de passe n'existe pas save_emd5=Le mot de passe Unix à copier est au format MD5 - access_title=Contrôle d'accès utilisateur access_header=Utilisateurs CVS en lecture seule access_readers1=Aucun utilisateur en lecture seule @@ -60,11 +55,9 @@ access_desc=Si un utilisateur est dans les deux listes, lecteurs et scripteurs, access_err=Impossible d'enregistrer le contrôle d'accès utilisateur access_euser=L'utilisateur '$1' n'existe pas access_ecannot=Vous n'êtes pas autorisé à modifier le contrôle d'accès utilisateur - cvsweb_title=Référentiel de navigation cvsweb_ecmd=La commande CVS $1 n'a pas été trouvée sur votre système. Cette commande est nécessaire pour afficher le référentiel CVS. cvsweb_ecannot=Vous n'êtes pas autorisé à afficher le référentiel CVS - config_title=Configuration du serveur config_header=Options de configuration du serveur config_auth=Vérifier les utilisateurs par rapport au fichier de mots de passe du système ? @@ -87,7 +80,6 @@ config_lock=Répertoire des fichiers de verrou config_err=Impossible d'enregistrer la configuration du serveur config_elock=Répertoire de fichiers de verrou manquant ou invalide config_ecannot=Vous n'êtes pas autorisé à modifier la configuration du serveur - log_setup=Configuré le serveur CVS log_activate=Activé le serveur CVS log_deactivate=Désactivé le serveur CVS @@ -96,13 +88,11 @@ log_delete_user=Supprimé l'utilisateur $1 log_modify_user=Modifié l'utilisateur $1 log_access=Changé le contrôle d'accès utilisateur log_config=Changé la configuration du serveur - acl_passwd=Peut gérer les utilisateurs de CVS ? acl_access=Peut modifier le contrôle d'accès utilisateur ? acl_config=Peut modifier la configuration du serveur ? acl_cvsweb=Peut afficher le référentiel CVS ? acl_setup=Peut configurer inetd ou xinetd pour exécuter le serveur CVS ? acl_init=Peut initialiser le référentiel ? - init_err=Impossible d'initialiser le référentiel init_ecannot=Vous n'êtes pas autorisé à initialiser un référentiel diff --git a/pserver/lang/he.auto b/pserver/lang/he.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/he.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/hr.auto b/pserver/lang/hr.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/hr.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/hu.auto b/pserver/lang/hu.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/hu.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/it.auto b/pserver/lang/it.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/it.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/ja.auto b/pserver/lang/ja.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/ja.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/ko b/pserver/lang/ko index 23cb021a1..721033508 100644 --- a/pserver/lang/ko +++ b/pserver/lang/ko @@ -16,10 +16,8 @@ index_deactdesc2=CVS 서버는 CVS 루트 $2를 $1(으)로 실행하도록 설 index_return=모듈 인덱스 index_asuser=다음 사용자로 실행: index_einetroot=주의! CVS 루트가 모듈 구성의 CVS 서버 루트와 일치하지 않습니다. CVS 서버를 재구동하여 문제를 해결할 수 있습니다. - setup_einet=inetd 또는 xinetd가 시스템에 설치되어 있지 않은 듯 싶습니다. setup_ecannot=CVS 서버 설정을 허가하지 않습니다. - passwd_title=CVS 유저 passwd_header=CVS 서버 유저 passwd_desc=아래에 나열된 유저들은 저장소에 로그인/접근 권한을 가지게 됩니다. 리스트에 없는 사용자가 로그인을 시도할 경우 서버 설정에 의거하여 유저 패스워드 파일 대신 시스템 패스워드 파일에서 검사를 시도합니다. @@ -31,7 +29,6 @@ passwd_sync_modify=유닉스 사용자가 수정될 때 매치되는 CVS 사용 passwd_sync_delete=유닉스 사용자가 제거될때 매치되는 CVS 사용자 제거 passwd_return=유저 리스트 passwd_ecannot=CVS 유저 관리 권한이 없습니다. - edit_title1=CVS 유저 생성 edit_title2=CVS 유저 편집 edit_header=CVS 유저 상세사항 @@ -43,13 +40,11 @@ edit_pass1=변경하지 않은채로 마침 edit_pass0=설정.. edit_unix=다음 유닉스 사용자로 파일 접근 edit_unixdef=유저이름과 동일 - save_err=CVS 유저 저장 실패 save_euser=유저이름이 지정되지 않았거나 유효하지 않습니다. save_eunix=유닉스 유저가 지정되지 않았거나 유효하지 않습니다. save_ecopy=존재하지 않는 사용자에 대하여 패스워드 파일의 유닉스 사용자를 복사 save_emd5=유닉스 암호를 MD5 형식으로 복사 - access_title=사용자 접근 제어 access_header=읽기 전용 CVS 유저 access_readers1=읽기 전용 유저 없음 @@ -60,11 +55,9 @@ access_desc=유저가 읽기 전용 유저와 쓰기 가능한 유저리스트 access_err=사용자 접근 제어 설정을 저장하는데 실패했습니다. access_euser='$1' 유저가 존재하지 않습니다. access_ecannot=사용자 접근 제어 설정을 편집할 권한이 없습니다. - cvsweb_title=저장소 보기 cvsweb_ecmd=시스템에서 CVS 명령 $1을 찾을 수 없습니다. 이 명령은 CVS 저장소를 보기위하여 필요합니다. cvsweb_ecannot=CVS 저장소를 볼 권한이 없습니다. - config_title=서버 설정 config_header=서버 설정 옵션 config_auth=시스템 passwd 파일로 유저를 검사하겠습니까? @@ -87,7 +80,6 @@ config_lock=Lock 파일 디렉토리 config_err=서버 설정을 저장하는데 실패했습니다. config_elock=lock 파일 디렉토리가 지정되지 않았거나 유효하지 않습니다. config_ecannot=서버 설정을 편집할 권한이 없습니다. - log_setup=CVS 서버 설정 log_activate=CVS 서버 구동 log_deactivate=CVS 서버 중지 @@ -96,13 +88,11 @@ log_delete_user=$1 유저 삭제 log_modify_user=$1 유저 수정 log_access=사용자 접근 제어 변경 log_config=서버 설정 변경 - acl_passwd=CVS 유저를 관리하겠습니까? acl_access=사용자 접근 제어를 수정하겠습니까? acl_config=서버 설정을 편집하겠습니까? acl_cvsweb=CVS 저장소를 보겠습니까? acl_setup=CVS 서버를 실행하기 위해 inetd 또는 xinted 를 설정하겠습니까? acl_init=저장소를 초기화 하겠습니까? - init_err=저장소 초기화 실패 init_ecannot=저장소 초기화 권한이 없습니다. diff --git a/pserver/lang/lt.auto b/pserver/lang/lt.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/lt.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/lv.auto b/pserver/lang/lv.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/lv.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/ms.auto b/pserver/lang/ms.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/ms.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/mt.auto b/pserver/lang/mt.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/mt.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/nl b/pserver/lang/nl index 7a463a3f4..733ef7017 100644 --- a/pserver/lang/nl +++ b/pserver/lang/nl @@ -16,10 +16,8 @@ index_deactdesc2=De CVS server is opgezet om te werken van $1 op uw systeem voor index_return=module index index_asuser=Uitvoeren als gebruiker : index_einetroot=Waarschuwing! De CVS root zoals die ingesteld is in de module configuratie komt niet overeen met de root voor de CVS server. Dit kan worden gefixt door de CVS server te deactiveren en daarna te activeren. - setup_einet=Noch inetd of xinetd lijken te zijn geinstalleerd op uw systeem. setup_ecannot=U bent niet bevoegd om de CVS server op te zetten - passwd_title=CVS Gebruikers passwd_header=CVS server gebruikers passwd_desc=De CVS server laat de gebruikers in de lijst hieronder inloggen en geeft toegang tot de repository. Wanneer een gebruiker, die niet in de lijst voorkomt, probeert in te loggen zal de server proberen het gebruikers wachtwoord te verifiëren tegen het systeem wachtwoord, afhankelijk van de server configuratie. @@ -31,7 +29,6 @@ passwd_sync_modify=Update een CVS gebruiker wanneer de overeenkomende Unix gebru passwd_sync_delete=Verwijder een CVS gebruiker wanneer de overeenkomende Unix gebruiker word verwijdert passwd_return=Gebruikers lijst passwd_ecannot=U bent niet bevoegd om CVS gebruikers te beheren - edit_title1=Maak CVS gebruiker edit_title2=Bewerk CVS gebruiker edit_header=CVS gebruikers details @@ -43,13 +40,11 @@ edit_pass1=Laat onverandert edit_pass0=Instellen naar .. edit_unix=Toegang tot files als Unix gebruiker edit_unixdef=Zelfde als gebruikersnaam - save_err=Mislukt om CVS gebruiker op te slaan save_euser=Ontbrekende of ongeldige gebruikersnaam save_eunix=Ontbrekende of ongeldige Unix gebruiker save_ecopy=Unix gebruiker om wachtwoord van de kopiëren bestaat niet save_emd5=Unix wachtwoord om te kopiëren is in MD5 formaat - access_title=Gebruikers Toegangs Controle access_header=Alleen lezen CVS gebruikers access_readers1=Er zijn geen alleen-lezen gebruikers @@ -60,11 +55,9 @@ access_desc=Wanneer een gebruiker voorkomt in de lees en schrijf lijst, zal deze access_err=Mislukt om gebruikers toegangs controle op te slaan. access_euser=Gebruiker '$1' bestaat niet access_ecannot=U bent niet bevoegd om de gebruikers toegangs controle te bewerken. - cvsweb_title=Doorzoek Repository cvsweb_ecmd=De CVS opdracht $1 is niet gevonden op uw systeem. Deze opdracht is nodig om de CVS repository te bekijken. cvsweb_ecannot=U bent niet bevoegd de CVS repository te bekijken - config_title=Server Configuratie config_header=Server configuratie opties config_auth=Controleer gebruikers met de systeem wachtwoord file? @@ -87,7 +80,6 @@ config_lock=Slot file directory config_err=Mislukt om server configuratie op te slaan config_elock=Ontbrekende of ongeldige slot file directory config_ecannot=U bent niet bevoegd de server configuratie te bewerken - log_setup=CVS server Instellen log_activate=Geactieveerde CVS server log_deactivate=Deactiveer CVS server @@ -96,13 +88,11 @@ log_delete_user=Verwijder gebruiker $1 log_modify_user=Gemodificeerde gebruiker $1 log_access=Veranderde gebruiker toegangs controle log_config=Veranderde server configuratie - acl_passwd=Mag CVS gebruikers beheren? acl_access=Mag gebruikers toegangs controle bewerken? acl_config=Mag server configuratie bewerken? acl_cvsweb=Mag CVS repository bekijken? acl_setup=Mag inetd of xinetd opzetten om een CVS server te starten? acl_init=Mag repository initialiseren? - init_err=Mislukt om repository te initialiseren init_ecannot=U bent niet bevoegd de repository te initialiseren diff --git a/pserver/lang/no b/pserver/lang/no index bb88da5c3..7edd280cb 100644 --- a/pserver/lang/no +++ b/pserver/lang/no @@ -16,10 +16,8 @@ index_deactdesc2=CVS tjeneren er satt opp ti lå kjøre fra $1 på systemet ditt index_return=modulindeks index_asuser=Kjør som bruker: index_einetroot=Advarsel! CVS rot satt i modulkonfigurasjonen stemmer ikke med roten for CVS tjeneren. Dette kan fikses ved å deaktivere og gjenaktivere CVS tjeneren. - setup_einet=Hverken inetd eller xinetd ser ut til å være installert på systemet ditt. setup_ecannot=Du har ikke lov til å sette opp CVS tjeneren - passwd_title=CVS brukere passwd_header=CVS tjener brukere passwd_desc=CVS tjeneren vil la brukere angitt nedenfor logge inn og få tilgang til arkivet. Dersom en ulistet bruker forsøker å logge inn kan tjeneren forsøke å verifisere brukerens passord mot systemets passordfil i stedet, avhengig av tjenerens konfigurasjon. @@ -31,7 +29,6 @@ passwd_sync_modify=Oppdater en CVS bruker når den samsvarende Unix brukeren er passwd_sync_delete=Slett en CVS bruker når den samsvarende Unix brukeren slettes. passwd_return=brukerliste passwd_ecannot=Du har ikke lov til å administrere CVS brukere - edit_title1=Opprett CVS bruker edit_title2=Rediger CVS bruker edit_header=CVS bruker detaljer @@ -43,13 +40,11 @@ edit_pass1=La stå uendret edit_pass0=Sett til.. edit_unix=Aksesser filer som unix bruker edit_unixdef=Samme som brukernavn - save_err=Kunne ikke lagre CVS bruker save_euser=Manglende eller ugyldig brukernavn save_eunix=Manglende eller ugyldig unux bruker save_ecopy=Unix bruker som passord skal kopieres fra, finnes ikke save_emd5=Unix passord som skal kopieres er i MD5 format - access_title=Bruker tilgangskontroll access_header=CVS brukere med kun lesetilgang access_readers1=Ingen brukere med bare lesetilgang @@ -60,11 +55,9 @@ access_desc=Dersom en bruker er i både leser- og skriver-listen, vil he kun bli access_err=Kunne ikke lagre bruker tilgangskontroll access_euser=Bruker '$1' finnes ikke access_ecannot=Du har ikke lov til å redigere tilganskontroll for bruker - cvsweb_title=Bla gjennom arkiv cvsweb_ecmd=CVS kommandoen $1 ble ikke funnet på systemet ditt. Denne kommandoen er nødvendig for å se gjennom CVS arkivet. cvsweb_ecannot=Du har ikke lov til å se CVS arkivet - config_title=Tjener konfigurasjon config_header=Innstillinger for tjener konfigurasjon config_auth=Sjekk brukere mot system passord filen? @@ -87,7 +80,6 @@ config_lock=Katalog for lås-filer config_err=Kunne ikke lagre tjener konfigurasjon config_elock=Manglende eller ugyldig katalog for lås-filer config_ecannot=Du har ikke lov til å redigere tjener konfigurasjonen - log_setup=Sett opp CVS tjener log_activate=Aktivert CVS tjener log_deactivate=Deaktivert CVS tjener @@ -96,13 +88,11 @@ log_delete_user=Slettet bruker $1 log_modify_user=Endret bruker $1 log_access=Endret bruker tilgangskontroll log_config=Endret tjener konfigurasjon - acl_passwd=Kan administrere CVS brukere? acl_access=Kan redigere bruker tilgangskontroll? acl_config=Kan redigere tjener konfigurasjon? acl_cvsweb=Kan se CVS arkiv? acl_setup=Kan sette opp inetd eller xinetd til å kjøre CVS tjener? acl_init=Kan initialisere arkiv? - init_err=Kunne ikke initialisere arkiv init_ecannot=Du har ikke lov til å initialisere et arkiv diff --git a/pserver/lang/pl.auto b/pserver/lang/pl.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/pl.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/pt.auto b/pserver/lang/pt.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/pt.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/pt_BR.auto b/pserver/lang/pt_BR.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/pt_BR.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/ro.auto b/pserver/lang/ro.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/ro.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/ru b/pserver/lang/ru index f85faed98..4600b9e78 100644 --- a/pserver/lang/ru +++ b/pserver/lang/ru @@ -10,9 +10,7 @@ index_actdesc=Сервер CVS настроен для работы с $1 на index_deact=Отключить сервер CVS index_deactdesc=Сервер CVS настроен для работы с $1 на вашей системе, и сейчас активен. Нажмите на эту кнопку для его выключения и запретить пользователям удаленный доступ к вашему репозитарию CVS. index_return=меню модуля - setup_einet=Ни inetd, ни xinetd не установлены на вашей системе. - passwd_title=Пользователи CVS passwd_header=Пользователи сервера CVS passwd_desc=Сервер CVS позволит пользователям, перечисленным ниже, регистрироваться и иметь доступ к репозитарию. Если попытается зарегистрироваться пользователь, не указанный в этом списке, то сервер, в зависимости от настроек сервера, попытается сравнить пароль пользователя с системным файлом паролей. @@ -23,7 +21,6 @@ passwd_sync_create=Добавить нового пользователя CVS п passwd_sync_modify=Обновить пользователя CVS при изменении соответствующего пользователя Unix. passwd_sync_delete=Удалить пользователя CVS при удалении соответствующего пользователя Unix. passwd_return=список пользователей - edit_title1=Создание пользователя CVS edit_title2=Редактирование пользователя CVS edit_header=Подробная информация о пользователе CVS @@ -35,13 +32,11 @@ edit_pass1=Оставить и не менять edit_pass0=Установить в .. edit_unix=Осуществлять доступ к файлам, как пользователь unix edit_unixdef=Как и имя пользователя - save_err=Ошибка при сохранении пользователя CVS save_euser=Не указано или некорректно имя пользователя save_eunix=Не указан или некорректен пользователь unix save_ecopy=Пользователь unix, с которого нужно получить пароль, не существует save_emd5=Пароль Unix для копирования находится в формате MD5 - access_title=Управление доступом пользователей access_header=Пользователи CVS с доступом только-для-чтения access_readers1=Нет пользователей с доступом только-для-чтения @@ -51,10 +46,8 @@ access_writers0=Только перечисленные пользователи access_desc=Если пользователь находится в обоих списках, то ему будет установлен доступ только-для-чтения. access_err=Ошибка при сохранении управления доступом пользователей access_euser=Пользователь '$1' не существует - cvsweb_title=Просмотр репозитария cvsweb_ecmd=Команда CVS $1 не найдена на вашей системе. Эта команда требуется для просмотра репозитария CVS. - config_title=Настройки сервера config_header=Параметры настройки сервера config_auth=Проверять пользователей в системном файле паролей? @@ -76,7 +69,6 @@ config_hist_R=Файл удален config_lock=Каталог блокирования файлов config_err=Ошибка при сохранении параметров сервера config_elock=Не указан или некорректен каталог блокирования файлов - log_setup=Настройка сервера CVS log_activate=Активирован сервер CVS log_deactivate=Деактивирован сервер CVS diff --git a/pserver/lang/ru.auto b/pserver/lang/ru.auto deleted file mode 100644 index fcb5e2d12..000000000 --- a/pserver/lang/ru.auto +++ /dev/null @@ -1,26 +0,0 @@ -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_ecannot=You are not allowed to setup the CVS server - -passwd_ecannot=You are not allowed to manage CVS users - -access_ecannot=You are not allowed to edit user access control - -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_ecannot=You are not allowed to edit the server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/sk.auto b/pserver/lang/sk.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/sk.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/sl.auto b/pserver/lang/sl.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/sl.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/sv.auto b/pserver/lang/sv.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/sv.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/th.auto b/pserver/lang/th.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/th.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/tr.auto b/pserver/lang/tr.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/tr.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/uk b/pserver/lang/uk index c445b1613..ab78ba171 100644 --- a/pserver/lang/uk +++ b/pserver/lang/uk @@ -1,87 +1,79 @@ -index_title=Сервер CVS -index_ecvs=Команда CVS $1 не знайдена на вашій системі. Можливо, він не встановлений, чи некоректні настроювання модуля. -index_eversion=Помилка при одержанні версії з команди CVS $1. На висновку було $2. -index_eroot=Ваш кореневий каталог CVS не був коректно набудований. Ви повинні використовувати настроювання модуля для його настроювання перед його роботою. -index_version=CVS версії $1 -index_setup=Настроювання сервера CVS -index_setupdesc=Сервер CVS зараз, видимо не набудований на вашій системі. Натисніть на цю кнопку для його запуску з $1 так, щоб користувачі могли віддалено одержати доступ до репозитарію CVS. -index_act=Активація сервера CVS -index_actdesc=Сервер CVS набудований для роботи з $1 на вашій системі, але зараз не активний. Натисніть на цю кнопку, якщо ви хочете активувати його і дозволити користувачам вилучений доступ до репозитарію CVS. -index_deact=Відключити сервер CVS -index_deactdesc=Сервер CVS набудований для роботи з $1 на вашій системі, і зараз активний. Натисніть на цю кнопку для його вимикання і заборонити користувачам вилучений доступ до вашого репозитарію CVS. -index_return=меню модуля - -setup_einet=Ні inetd, ні xinetd не встановлені на вашій системі. - -passwd_title=Користувачі CVS -passwd_header=Користувачі сервера CVS -passwd_desc=Сервер CVS дозволить користувачам, перерахованим нижче, реєструватися і мати доступ до репозитарію. Якщо спробує зареєструватися користувач, не зазначений у цьому списку, то сервер, у залежності від настроювань сервера, спробує порівняти пароль користувача із системним файлом паролів. -passwd_add=Додавання нового користувача CVS -passwd_none=Не визначено жодного користувача сервера CVS. -passwd_sync=Опції нижче налаштовують синхронізацію між користувачами Unix, створеними через Webmin і користувачами CVS. -passwd_sync_create=Додати нового користувача CVS при додаванні користувача Unix. -passwd_sync_modify=Обновити користувача CVS при зміні відповідного користувача Unix. -passwd_sync_delete=Видалити користувача CVS при видаленні відповідного користувача Unix. -passwd_return=список користувачів - -edit_title1=Створення користувача CVS -edit_title2=Редагування користувача CVS -edit_header=Докладна інформація про користувача CVS -edit_user=Ім'я входу для реєстрації -edit_pass=Пароль реєстрації -edit_pass3=Копіювати з unix -edit_pass2=Не потрібно -edit_pass1=Залишити і не змінювати -edit_pass0=Установити в.. -edit_unix=Здійснювати доступ до файлів, як користувач unix -edit_unixdef=Як і ім'я користувача - -save_err=Помилка при збереженні користувача CVS -save_euser= чиНе зазначене некоректне ім'я користувача -save_eunix= чиНе зазначений некоректний користувач unix -save_ecopy=Користувач unix, з якого потрібно одержати пароль, не існує -save_emd5=Пароль Unix для копіювання знаходиться у форматі MD5 - -access_title=Керування доступом користувачів -access_header=Користувачі CVS з доступом тільки-трива-читання -access_readers1=Немає користувачів з доступом тільки-трива-читання -access_readers0=Перераховані користувачі мають доступ тільки-трива-читання .. -access_writers1=Усі користувачі мають право на запис -access_writers0=Тільки перераховані користувачі мають право на запис .. -access_desc=Якщо користувач знаходиться в обох списках, то йому буде встановлений доступ тільки-трива-читання. -access_err=Помилка при збереженні керування доступом користувачів -access_euser=Користувач '$1' не існує - -cvsweb_title=Перегляд репозитарію -cvsweb_ecmd=Команда CVS $1 не знайдена на вашій системі. Ця команда потрібно для перегляду репозитарію CVS. - -config_title=Настроювання сервера -config_header=Параметри настроювання сервера -config_auth=Перевіряти користувачів у системному файлі паролів? -config_top=Створити каталог CVS найвищого рівня? -config_hist=Типи подій для ведення журналу -config_hist_all=Усі типи -config_hist_sel=Обрані типи .. -config_hist_F=Відпустка -config_hist_O=Перевірка -config_hist_E=Експорт -config_hist_T=RTag -config_hist_C=Об'єднання з помилками -config_hist_G=Успішне об'єднання -config_hist_U=Робітники файли скопійовані -config_hist_W=Робітники файли вилучені -config_hist_A=Файл доданий -config_hist_M=Файл змінений -config_hist_R=Файл вилучений -config_lock=Каталог блокування файлів -config_err=Помилка при збереженні параметрів сервера -config_elock= чиНе зазначений некоректний каталог блокування файлів - -log_setup=Настроювання сервера CVS -log_activate=Активований сервер CVS -log_deactivate=Деактивовано сервер CVS -log_create_user=Створений користувач $1 -log_delete_user=Вилучений користувач $1 -log_modify_user=Змінений користувач $1 -log_access=Змінене керування доступом користувачів -log_config=Змінені настроювання сервера +index_title=Сервер CVS +index_ecvs=Команда CVS $1 не знайдена на вашій системі. Можливо, він не встановлений, чи некоректні настроювання модуля. +index_eversion=Помилка при одержанні версії з команди CVS $1. На висновку було $2. +index_eroot=Ваш кореневий каталог CVS не був коректно набудований. Ви повинні використовувати настроювання модуля для його настроювання перед його роботою. +index_version=CVS версії $1 +index_setup=Настроювання сервера CVS +index_setupdesc=Сервер CVS зараз, видимо не набудований на вашій системі. Натисніть на цю кнопку для його запуску з $1 так, щоб користувачі могли віддалено одержати доступ до репозитарію CVS. +index_act=Активація сервера CVS +index_actdesc=Сервер CVS набудований для роботи з $1 на вашій системі, але зараз не активний. Натисніть на цю кнопку, якщо ви хочете активувати його і дозволити користувачам вилучений доступ до репозитарію CVS. +index_deact=Відключити сервер CVS +index_deactdesc=Сервер CVS набудований для роботи з $1 на вашій системі, і зараз активний. Натисніть на цю кнопку для його вимикання і заборонити користувачам вилучений доступ до вашого репозитарію CVS. +index_return=меню модуля +setup_einet=Ні inetd, ні xinetd не встановлені на вашій системі. +passwd_title=Користувачі CVS +passwd_header=Користувачі сервера CVS +passwd_desc=Сервер CVS дозволить користувачам, перерахованим нижче, реєструватися і мати доступ до репозитарію. Якщо спробує зареєструватися користувач, не зазначений у цьому списку, то сервер, у залежності від настроювань сервера, спробує порівняти пароль користувача із системним файлом паролів. +passwd_add=Додавання нового користувача CVS +passwd_none=Не визначено жодного користувача сервера CVS. +passwd_sync=Опції нижче налаштовують синхронізацію між користувачами Unix, створеними через Webmin і користувачами CVS. +passwd_sync_create=Додати нового користувача CVS при додаванні користувача Unix. +passwd_sync_modify=Обновити користувача CVS при зміні відповідного користувача Unix. +passwd_sync_delete=Видалити користувача CVS при видаленні відповідного користувача Unix. +passwd_return=список користувачів +edit_title1=Створення користувача CVS +edit_title2=Редагування користувача CVS +edit_header=Докладна інформація про користувача CVS +edit_user=Ім'я входу для реєстрації +edit_pass=Пароль реєстрації +edit_pass3=Копіювати з unix +edit_pass2=Не потрібно +edit_pass1=Залишити і не змінювати +edit_pass0=Установити в.. +edit_unix=Здійснювати доступ до файлів, як користувач unix +edit_unixdef=Як і ім'я користувача +save_err=Помилка при збереженні користувача CVS +save_euser= чиНе зазначене некоректне ім'я користувача +save_eunix= чиНе зазначений некоректний користувач unix +save_ecopy=Користувач unix, з якого потрібно одержати пароль, не існує +save_emd5=Пароль Unix для копіювання знаходиться у форматі MD5 +access_title=Керування доступом користувачів +access_header=Користувачі CVS з доступом тільки-трива-читання +access_readers1=Немає користувачів з доступом тільки-трива-читання +access_readers0=Перераховані користувачі мають доступ тільки-трива-читання .. +access_writers1=Усі користувачі мають право на запис +access_writers0=Тільки перераховані користувачі мають право на запис .. +access_desc=Якщо користувач знаходиться в обох списках, то йому буде встановлений доступ тільки-трива-читання. +access_err=Помилка при збереженні керування доступом користувачів +access_euser=Користувач '$1' не існує +cvsweb_title=Перегляд репозитарію +cvsweb_ecmd=Команда CVS $1 не знайдена на вашій системі. Ця команда потрібно для перегляду репозитарію CVS. +config_title=Настроювання сервера +config_header=Параметри настроювання сервера +config_auth=Перевіряти користувачів у системному файлі паролів? +config_top=Створити каталог CVS найвищого рівня? +config_hist=Типи подій для ведення журналу +config_hist_all=Усі типи +config_hist_sel=Обрані типи .. +config_hist_F=Відпустка +config_hist_O=Перевірка +config_hist_E=Експорт +config_hist_T=RTag +config_hist_C=Об'єднання з помилками +config_hist_G=Успішне об'єднання +config_hist_U=Робітники файли скопійовані +config_hist_W=Робітники файли вилучені +config_hist_A=Файл доданий +config_hist_M=Файл змінений +config_hist_R=Файл вилучений +config_lock=Каталог блокування файлів +config_err=Помилка при збереженні параметрів сервера +config_elock= чиНе зазначений некоректний каталог блокування файлів +log_setup=Настроювання сервера CVS +log_activate=Активований сервер CVS +log_deactivate=Деактивовано сервер CVS +log_create_user=Створений користувач $1 +log_delete_user=Вилучений користувач $1 +log_modify_user=Змінений користувач $1 +log_access=Змінене керування доступом користувачів +log_config=Змінені настроювання сервера diff --git a/pserver/lang/uk.auto b/pserver/lang/uk.auto deleted file mode 100644 index fcb5e2d12..000000000 --- a/pserver/lang/uk.auto +++ /dev/null @@ -1,26 +0,0 @@ -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_ecannot=You are not allowed to setup the CVS server - -passwd_ecannot=You are not allowed to manage CVS users - -access_ecannot=You are not allowed to edit user access control - -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_ecannot=You are not allowed to edit the server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/ur.auto b/pserver/lang/ur.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/ur.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/vi.auto b/pserver/lang/vi.auto deleted file mode 100644 index 3eb201346..000000000 --- a/pserver/lang/vi.auto +++ /dev/null @@ -1,108 +0,0 @@ -index_title=CVS Server -index_ecvs=The CVS command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -index_eversion=Failed to get the version from CVS command $1. Output was $2. -index_eroot=Your CVS root directory has not been set correctly. You must use the module configuration to set it before this module will work. -index_initdesc=Alternately, you can create a new CVS repository under $1 by clicking the button below. -index_init=Initialize Repository -index_version=CVS version $1 -index_setup=Setup CVS Server -index_setupdesc=The CVS server does not appear to be currently setup on your system. Click this button to have it run from $1 so that remote users can access your CVS repository. -index_act=Activate CVS Server -index_actdesc=The CVS server is setup to run from $1 on your system, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deact=Deactivate CVS Server -index_deactdesc=The CVS server is setup to run from $1 on your system, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_return=module index -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. - -setup_einet=Neither inetd or xinetd appear to be installed on your system. -setup_ecannot=You are not allowed to setup the CVS server - -passwd_title=CVS Users -passwd_header=CVS server users -passwd_desc=The CVS server will allow the users listed below to login and access the repository. If an unlisted user tries to login, the server may attempt to verify the user's password against the system password file instead, depending on the server configuration. -passwd_add=Add a new CVS user. -passwd_none=No CVS server users have been defined yet. -passwd_sync=The options below configure synchronization between Unix users created through Webmin and CVS users. -passwd_sync_create=Add a new CVS user when a Unix user is added. -passwd_sync_modify=Update a CVS user when the matching Unix user is modified. -passwd_sync_delete=Delete a CVS user when the matching Unix user is deleted. -passwd_return=user list -passwd_ecannot=You are not allowed to manage CVS users - -edit_title1=Create CVS User -edit_title2=Edit CVS User -edit_header=CVS user details -edit_user=Login username -edit_pass=Login password -edit_pass3=Copy from unix -edit_pass2=None required -edit_pass1=Leave unchanged -edit_pass0=Set to.. -edit_unix=Access files as unix user -edit_unixdef=Same as username - -save_err=Failed to save CVS user -save_euser=Missing or invalid username -save_eunix=Missing or invalid unix user -save_ecopy=Unix user to copy password from does not exist -save_emd5=Unix password to copy is in MD5 format - -access_title=User Access Control -access_header=Read-only CVS users -access_readers1=No read-only users -access_readers0=Listed users are read-only .. -access_writers1=All users can write -access_writers0=Only listed users can write .. -access_desc=If a user is in both the readers and writers lists, he will be given read-only access. -access_err=Failed to save user access control -access_euser=User '$1' does not exist -access_ecannot=You are not allowed to edit user access control - -cvsweb_title=Browse Repository -cvsweb_ecmd=The CVS command $1 was not found on your system. This command is needed for viewing the CVS repository. -cvsweb_ecannot=You are not allowed to view the CVS repository - -config_title=Server Configuration -config_header=Server configuration options -config_auth=Check users against system password file? -config_top=Create top-level CVS directories? -config_hist=Event types to log in history -config_hist_all=All types -config_hist_sel=Selected types .. -config_hist_F=Release -config_hist_O=Checkout -config_hist_E=Export -config_hist_T=RTag -config_hist_C=Merge with collisions -config_hist_G=Successful merge -config_hist_U=Working file copied -config_hist_W=Working file deleted -config_hist_A=File added -config_hist_M=File modified -config_hist_R=File removed -config_lock=Lock files directory -config_err=Failed to save server configuration -config_elock=Missing or invalid lock files directory -config_ecannot=You are not allowed to edit the server configuration - -log_setup=Setup CVS server -log_activate=Activated CVS server -log_deactivate=Deactivated CVS server -log_create_user=Created user $1 -log_delete_user=Deleted user $1 -log_modify_user=Modified user $1 -log_access=Changed user access control -log_config=Changed server configuration - -acl_passwd=Can manage CVS users? -acl_access=Can edit user access control? -acl_config=Can edit server configuration? -acl_cvsweb=Can view CVS repository? -acl_setup=Can setup inetd or xinetd to run CVS server? -acl_init=Can initialized repository? - -init_err=Failed to initialize repository -init_ecannot=You are not allowed to initialize a repository diff --git a/pserver/lang/zh b/pserver/lang/zh index 1d7a23a7e..5c41af7e7 100644 --- a/pserver/lang/zh +++ b/pserver/lang/zh @@ -12,10 +12,8 @@ index_actdesc=CVS服务器已设置从您的系统中的$1运行，但是当前 index_deact=禁用CVS服务器 index_deactdesc=CVS服务器设置要运行 index_return=模块索引 - setup_einet=您的系统中尚未安装 inetd 或 xinetd。 setup_ecannot=你没有设置CVS服务器的权限 - passwd_title=CVS用户 passwd_header=CVS服务器用户 passwd_desc=CVS服务器将允许用户列表，登陆和访问储存库。如一个不在列表中的用户尝试登陆，服务器将尝试用系统中的password文件进行代替，这依赖于服务器的设置。 @@ -27,7 +25,6 @@ passwd_sync_modify=当相关联的的系统(Unix)用户更新后，也同时更 passwd_sync_delete=当相关联的系统(Unix)用户删除后，也同时删除CVS中相同的用户。 passwd_return=用户列表 passwd_ecannot=你没有管理CVS用户的权限 - edit_title1=创建CVS用户 edit_title2=编辑CVS用户 edit_header=CVS用户细节 @@ -39,13 +36,11 @@ edit_pass1=不改变 edit_pass0=设置为.. edit_unix=允许文件象unix用户一样 edit_unixdef=和用户名一样 - save_err=保存CVS用户失败 save_euser=用户名丢失或不正确 save_eunix=系统(unix)用户丢失或不正确 save_ecopy=系统(Unix)用户要复制的password不存在 save_emd5=系统(Unix)password复制使用MD5格式 - access_title=用户访问控制 access_header=CVS用户只读 access_readers1=没有只读用户 @@ -56,11 +51,9 @@ access_desc=如果一个用户同时在只读和可写列表中，他将只有 access_err=保存 用户访问控制 失败 access_euser=用户 '$1' 不存在 access_ecannot=你没有权限编辑 用户访问控制 - cvsweb_title=浏览储存库 cvsweb_ecmd=在你的系统中，没有发现CVS命令 $1 。这个命令需要浏览储存库。 cvsweb_ecannot=你没有查看CVS储存库的权限 - config_title=服务器配置 config_header=服务器配置设置 config_auth=阻止使用系统password文件？ @@ -83,7 +76,6 @@ config_lock=Lock文件目录 config_err=保存服务器配置失败 config_elock=lock文件目录丢失或者无效 config_ecannot=你没有编辑服务器配置的权限 - log_setup=设置CVS服务器 log_activate=CVS服务器已启动 log_deactivate=CVS服务器已停止 @@ -92,13 +84,11 @@ log_delete_user=用户 $1 已删除 log_modify_user=用户 $1 已修改 log_access=修改用户访问控制 log_config=服务器设置已修改 - acl_passwd=是否可以管理CVS用户？ acl_access=是否可以编辑 用户访问控制？ acl_config=是否可以编辑 服务器配置？ acl_cvsweb=是否可以查看CVS储存库？ acl_setup=是否可以设置 inetd 或者 xinetd 来控制运行CVS服务器？ acl_init=是否可以 初始化储存库？ - init_err=初始化储存库失败 init_ecannot=你没有初始化储存库的权限 diff --git a/pserver/lang/zh.auto b/pserver/lang/zh.auto deleted file mode 100644 index 9eef5392c..000000000 --- a/pserver/lang/zh.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. diff --git a/pserver/lang/zh_TW b/pserver/lang/zh_TW index 06f717b9a..ffbcb22fd 100644 --- a/pserver/lang/zh_TW +++ b/pserver/lang/zh_TW @@ -12,10 +12,8 @@ index_actdesc=您的系統中的CVS伺服器尚未安裝。請點擊該按鈕從 index_deact=禁用CVS伺服器 index_deactdesc=CVS伺服器組態要執行 index_return=模組索引 - setup_einet=您的系統中尚未安裝 inetd 或 xinetd。 setup_ecannot=您不被允許設定CVS伺服器 - passwd_title=CVS使用者 passwd_header=CVS伺服器使用者 passwd_desc=CVS伺服器讓下列使用者可以登入和使用儲藏庫，如果未在清單上的使用者嘗試登入，伺服器會試圖了解使用者身份和密碼是否與系統密碼相符，這取決於伺服器組態。 @@ -27,7 +25,6 @@ passwd_sync_modify=當符合的Unix使用者更新後，也同時更新CVS中的 passwd_sync_delete=當符合的Unix使用者刪除後，也同時刪除CVS中的使用者。 passwd_return=使用者列表 passwd_ecannot=您不被允許管理CVS儲藏庫 - edit_title1=建立CVS使用者 edit_title2=編輯CVS使用者 edit_header=CVS使用者細節 @@ -39,13 +36,11 @@ edit_pass1=不改變 edit_pass0=組態為.. edit_unix=允許檔象unix使用者一樣 edit_unixdef=和使用者名一樣 - save_err=保存CVS使用者失敗 save_euser=使用者名丟失或不正確 save_eunix=unix使用者丟失或不正確 save_ecopy=Unix使用者要複製的密碼不存在 save_emd5=Unix 密碼複製使用MD5格式 - access_title=使用者進入控制 access_header=CVS使用者唯讀 access_readers1=沒有唯讀使用者 @@ -56,11 +51,9 @@ access_desc=如果一個使用者同時在唯讀和可寫列表中，他將只 access_err=保存使用者進入控制失敗 access_euser=使用者 '$1' 不存在 access_ecannot=您不被允許編輯使用者進入控制 - cvsweb_title=瀏覽儲存庫 cvsweb_ecmd=在你的系統中，沒有發現CVS命令 $1 。這個命令需要瀏覽儲存庫。 cvsweb_ecannot=您不被允許檢視CVS儲藏庫 - config_title=伺服器組態 config_header=伺服器組態組態 config_auth=阻止使用系統密碼？ @@ -83,7 +76,6 @@ config_lock=鎖定檔目錄 config_err=保存伺服器組態失敗 config_elock=鎖定檔目錄丟失或者無效 config_ecannot=您不被允許編輯伺服器組態 - log_setup=組態CVS伺服器 log_activate=啟動CVS伺服器 log_deactivate=停止CVS伺服器 @@ -92,13 +84,11 @@ log_delete_user=刪除使用者 $1 log_modify_user=修改使用者 $1 log_access=修改使用者進入控制 log_config=修改伺服器組態 - acl_passwd=可以管理CVS使用者? acl_access=可以編輯使用者進入控制? acl_config=可以編輯伺服器組態 acl_cvsweb=可以檢視CVS儲藏庫? acl_setup=可以設定以inetd或xinetd 執行CVS伺服器? acl_init=可以初始化儲藏庫? - init_err=初始化資料庫失敗 init_ecannot=您不被允許初始化儲藏庫 diff --git a/pserver/lang/zh_TW.auto b/pserver/lang/zh_TW.auto deleted file mode 100644 index 9eef5392c..000000000 --- a/pserver/lang/zh_TW.auto +++ /dev/null @@ -1,4 +0,0 @@ -index_actdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, but not currently active. Click this button if you want to activate it and allow remote users to access your CVS repository. -index_deactdesc2=The CVS server is setup to run from $1 on your system for the CVS root $2, and is active. Click this button if you want to deactivate it and prevent remote users from accessing your CVS repository. -index_asuser=Run as user: -index_einetroot=Warning! The CVS root set in the module configuration does not match the root for the CVS server. This can be fixed by deactivating and reactivating the CVS server. diff --git a/qmailadmin/lang/de b/qmailadmin/lang/de index 8c9f62209..82f878bbe 100644 --- a/qmailadmin/lang/de +++ b/qmailadmin/lang/de @@ -402,4 +402,4 @@ match_!headers=Header entsprechen nicht delq_titles=Nachrichten löschen delq_rusure=Sind Sie sicher, dass Sie die $1 ausgewählten Warteschlangen-Nachrichten löschen möchten? -delq_confirm=Nachrichten löschen +delq_confirm=Nachrichten löschen \ No newline at end of file diff --git a/raid/lang/de b/raid/lang/de index 6e9e052da..97473a02e 100644 --- a/raid/lang/de +++ b/raid/lang/de @@ -167,4 +167,4 @@ delete_eidx=Kein RAID-Array ausgewählt! remove_title=Partition aus RAID-Array entfernen remove_rusure=Sind Sie sicher, dass Sie die Partition $2 des RAID-Arrays $1 entfernen möchten? remove_ok=Ja, entfernen -remove_eidx=Kein RAID-Array ausgewählt! +remove_eidx=Kein RAID-Array ausgewählt! \ No newline at end of file diff --git a/rbac/lang/de b/rbac/lang/de index 0bb819d03..2cb17b58f 100644 --- a/rbac/lang/de +++ b/rbac/lang/de @@ -249,4 +249,4 @@ prctl_etask=Fehlende oder ungültige Aufgaben-ID prctl_res=Ressource prctl_priv=Privilegtyp prctl_limit=Obergrenze -prctl_action=Aktion +prctl_action=Aktion \ No newline at end of file diff --git a/samba/lang/de b/samba/lang/de index 6e2064541..3a5456187 100644 --- a/samba/lang/de +++ b/samba/lang/de @@ -91,6 +91,7 @@ convert_who1=Alle außer aufgelisteten Benutzern und UID-Bereichen misc_title=Verschiedene Optionen misc_debug=Debug-Stufe +misc_cachecallgetwd()-Aufrufe cachen? misc_lockdir=Sperrverzeichnis misc_log=Protokolldatei misc_maxlog=Maximale Protokolldateigröße @@ -663,4 +664,4 @@ manual_err=Fehler beim Speichern der Konfigurationsdatei manual_edata=Keine Eingaben! delete_err=Fehler beim Löschen der Freigaben -delete_enone=Keine ausgewählt +delete_enone=Keine ausgewählt \ No newline at end of file diff --git a/samba/lang/de.auto b/samba/lang/de.auto deleted file mode 100644 index 99e762cdd..000000000 --- a/samba/lang/de.auto +++ /dev/null @@ -1 +0,0 @@ -misc_cachecall=Cache getwd() calls? diff --git a/sarg/lang/de b/sarg/lang/de index 25e95d49a..d6df86d2a 100644 --- a/sarg/lang/de +++ b/sarg/lang/de @@ -174,4 +174,4 @@ webmin_log_sched_create=Geplante Berichterstellung aktiviert webmin_log_sched_delete=Geplante Berichterstellung deaktiviert webmin_log_sched_update=Geplante Berichterstellung aktualisiert webmin_log_sched_nothing=Geplante Berichterstellung deaktiviert gelassen -webmin_log_generate=Bericht erstellt +webmin_log_generate=Bericht erstellt \ No newline at end of file diff --git a/sendmail/lang/de b/sendmail/lang/de index 8f3e22cc1..4207a3199 100644 --- a/sendmail/lang/de +++ b/sendmail/lang/de @@ -840,4 +840,4 @@ ports_ecannot=Sie sind nicht berechtigt, Netzwerkports zu verwalten ports_ename=Ungültiger Portname in Zeile $1 ports_eclash=Doppelte Portnamen in Zeile $1 ports_eaddress=Fehlende oder ungültige IP-Adresse in Zeile $1 -ports_eport=Fehlende oder ungültige Portnummer in Zeile $1 +ports_eport=Fehlende oder ungültige Portnummer in Zeile $1 \ No newline at end of file diff --git a/sentry/lang/af.auto b/sentry/lang/af.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/af.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/ar.auto b/sentry/lang/ar.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/ar.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/be.auto b/sentry/lang/be.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/be.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/bg.auto b/sentry/lang/bg.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/bg.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/ca b/sentry/lang/ca index 28a7f6a65..6c1ad2f00 100644 --- a/sentry/lang/ca +++ b/sentry/lang/ca @@ -1,7 +1,6 @@ index_title=Sentinelles de Seguretat index_ecommands=No s'ha trobat al sistema cap de les ordres de seguretat de sentry ($1, $2 or $3). Pot ser que no n'hi hagi cap d'instal·lada, o bé que la configuració del mòdul sigui incorrecta. index_return=al menú de mòduls - portsentry_title=Configuració de Portsentry portsentry_below=(Detecció d'escaneig de ports) portsentry_ecommand=No s'ha trobat al sistema el dimoni $1 de Portsentry. Pot ser que no estigui instal·Lat, o bé que la configuració del mòdul sigui incorrecta. @@ -40,7 +39,6 @@ portsentry_ekill=No s'han pogut matar els processos $1: $2 portsentry_estopped=Ja no està en execució portsentry_starterr=No s'ha pogut iniciar portsentry portsentry_save=Desa i Aplica - hostsentry_title=Configuració de Hostsentry hostsentry_below=(Detecció d'entrades sospitoses) hostsentry_ecommand=No s'ha trobat al sistema el script python $1 de portsentry. Pot ser que no estigui instal·lat, o bé que la configuració del mòdul sigui incorrecta. @@ -65,7 +63,6 @@ hostsentry_save=Desa i Aplica hostsentry_err=No s'ha pogut desar la configuració de hostsentry hostsentry_eignore='$1' no és un usuari vàlid hostsentry_emultiple='$1' no és un host vàlid a partir del qual ignorar les entrades - logcheck_title=Configuració dels Registres de Verificació logcheck_ecommand=No s'ha trobat al sistema l'ordre de verificació de registres $1. Pot ser que no estigui instal·lada, o bé que la configuració del mòdul sigui incorrecta. logcheck_eversion=L'ordre $1 de comprovacio de registres no té la versió esperada per Webmin. @@ -81,7 +78,6 @@ logcheck_save=Desa i Aplica logcheck_eto=Hi falta l'adreça de correu o bé és invàlida logcheck_runparts=La comprovació de registres s'executa des de cron amb el script $1 logcheck_files=Fitxers de registre que es monitoritzen - mod_moduleLoginLogout=Enregistra les entrades i les sortides mod_moduleFirstLogin=Detecta la primera entrada d'un usuari mod_moduleForeignDomain=Detecta l'entrada des d'un domini foraster @@ -94,7 +90,6 @@ mod_moduleInvalidUtmp=Detecta entrades utmp modificades mod_moduleHistorySuspicious=Detecta ordres sospitoses als historials mod_moduleNetworkDaemon=Detecta dimonis que s'han deixat en execució mod_moduleFileExists=Detecta fitxers sospitosos als directoris arrel - log_hostsentry=S'ha desat la configuració de hostsentry log_portsentry=S'ha desat la configuració de portsentry log_logcheck=S'ha desat la configuració de comprovació de registres diff --git a/sentry/lang/ca.auto b/sentry/lang/ca.auto deleted file mode 100644 index 81f0c80ec..000000000 --- a/sentry/lang/ca.auto +++ /dev/null @@ -1 +0,0 @@ -logcheck_to=Email reports to diff --git a/sentry/lang/cs b/sentry/lang/cs index 51f5903be..19605107b 100644 --- a/sentry/lang/cs +++ b/sentry/lang/cs @@ -1,7 +1,6 @@ index_title=Hlídači zabezpečení index_ecommands=Žádný s příkazů hlídačů zabezpečení ($1, $2 nebo $3) nebyl ve vašem systému nalezen. Možná, že není žádný z nich nainstalován, nebo vaše konfigurace modulu inení správná. index_return=menu modulu - portsentry_title=Konfigurace Portsentry portsentry_below=(Detekce scanování portů) portsentry_ecommand=Portsentry démon $1 nebyl ve vašem systému nalezen. Možná není nainstalován, nebo vaše konfigurace modulu není správná. @@ -40,7 +39,6 @@ portsentry_ekill=Chyba při zabití procesů $1 : $2 portsentry_estopped=Již neběží portsentry_starterr=Chyba při spuštění Portsentry portsentry_save=Uložit a použít - hostsentry_title=Konfigurace Hostsentry hostsentry_below=(Detekce podezřelých přihlašování) hostsentry_ecommand=Hostsentry python script $1 nebyl ve vašem systému nalezen. Možná není nainstalován, nebo vaše konfigurace modulu není správná. @@ -65,7 +63,6 @@ hostsentry_save=Uložit a použít hostsentry_err=Chyba při ukládání konfigurace Hostsentry hostsentry_eignore='$1' není platný uživatel, u kterého se mají ignorovat přihlašování hostsentry_emultiple='$1' není platný host, který je důvěryhodný při vícenásobném přihlašování z - logcheck_title=Logcheck konfigurace logcheck_ecommand=Logcheck příkaz $1 nebyl ve vašem systému nalezen. Možná není nainstalován, nebo vaše konfigurace modulu není správná. logcheck_eversion=Příkaz pro kontrolu $1 není ve verzi, která je očekávána Webminem. @@ -82,7 +79,6 @@ logcheck_save=Uložit a použít logcheck_eto=Chybějící nebo nesprávná email adresa logcheck_runparts=Log kontrolování běži z cronu pomocí skriptu $1 logcheck_files=Log soubory, které jsou monitorovány - mod_moduleLoginLogout=Zaznamenávat přihlašování a odhlašování mod_moduleFirstLogin=Detekovat první přihlášení uživatele mod_moduleForeignDomain=Detekovat přihlášení z cizí domény @@ -95,7 +91,6 @@ mod_moduleInvalidUtmp=Detekovat modifikovanýmodified utmp zápis mod_moduleHistorySuspicious=Detekovat podezřelé příkazy v historii mod_moduleNetworkDaemon=Detekovat divně běžícího démona mod_moduleFileExists=Detekovat podezřelé soubory v domovském adresáři - log_hostsentry=Uložena Hostsentry konfigurace log_portsentry=Uložena Portsentry konfigurace log_logcheck=Uložena Logcheck konfigurace diff --git a/sentry/lang/da.auto b/sentry/lang/da.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/da.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/de b/sentry/lang/de index eb9c8d7ba..b31da4bfe 100644 --- a/sentry/lang/de +++ b/sentry/lang/de @@ -1,7 +1,6 @@ index_title=Sicherheits Sentries index_ecommands=Keiner der Sicherheit sentry Befehle ($1, $2 oder $3) wurden auf Ihrem System gefunden. Vielleicht ist keiner installiert, oder Ihre Modulkonfiguration ist falsch. index_return=Module Menü - portsentry_title=Portsentry Konfiguration portsentry_below=(Portscan Erkennung) portsentry_ecommand=Der Portsentry Daemon $1 wurde nicht auf Ihrem System gefunden. Vielleicht ist es nicht installiert, oder Ihre Modulkonfiguration ist falsch. @@ -40,7 +39,6 @@ portsentry_ekill=Fehlgeschlagen Prozesse zu töten $1 : $2 portsentry_estopped=Läuft nicht länger portsentry_starterr=Fehlgeschlagen portsentry zu starten portsentry_save=Speichern und Anwenden - hostsentry_title=Hostsentry Konfiguration hostsentry_below=(Verdächtiges Login erkannt) hostsentry_ecommand=Das Hostsentry Python-Skript $1 wurde auf Ihrem System nicht gefunden. Vielleicht ist es nicht installiert, oder Ihre Modulkonfiguration ist falsch. @@ -65,7 +63,6 @@ hostsentry_save=Speichern und Anwenden hostsentry_err=Fehlgeschlagen die hostsentry Konfiguration zu speichern hostsentry_eignore='$1' ist kein gültiger Benutzer-Login zum ignorieren hostsentry_emultiple='$' ist kein gültiger Host um mehrere Logins zu ignorieren von - logcheck_title=Logcheck Konfiguration logcheck_ecommand=Der logcheck Befehl $1 wurde nicht auf Ihrem System gefunden. Vielleicht ist es nicht installiert, oder Ihre Modulkonfiguration ist falsch. logcheck_eversion=Der logcheck Befehl $1 ist nicht die Version die Webmin erwartet. @@ -82,7 +79,6 @@ logcheck_save=Speichern und Anwenden logcheck_eto=Fehlende oder ungültige E-Mail-Adresse logcheck_runparts=Logs überprüfen wird von cron per Skript $1 ausgeführt logcheck_files=Log-Dateien werden überwacht - mod_moduleLoginLogout=Zeichne Logins und Logouts auf mod_moduleFirstLogin=Erkennen ersten Login vom Benutzer mod_moduleForeignDomain=Erkenne Login von fremden Domain @@ -95,7 +91,6 @@ mod_moduleInvalidUtmp=Erkenne modifizierten utmp-Eintrag mod_moduleHistorySuspicious=Erkenne verdächtige Befehle in der history mod_moduleNetworkDaemon=Erkenne laufenden Daemon mod_moduleFileExists=Erkenne verdächtige Dateien im Home-Verzeichnis - log_hostsentry=Hostsentry Konfiguration gespeichert log_portsentry=Portsentry Konfiguration gespeichert log_logcheck=Logcheck Konfiguration gespeichert diff --git a/sentry/lang/el.auto b/sentry/lang/el.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/el.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/es b/sentry/lang/es index 61ad3e7a2..29c367760 100644 --- a/sentry/lang/es +++ b/sentry/lang/es @@ -1,7 +1,6 @@ index_title=Centinelas de Seguridad index_ecommands=Ninguno de los comandos de centinela de seguridad ($1, $2 o $3) fue hallado en tu sistema. Quizás no está instalado o tu configuración del módulo es incorrecta. index_return=menú del módulo - portsentry_title=Configuración de Centinela de Puerto portsentry_below=(Detección de exploración de puerto) portsentry_ecommand=El daemon de Centinela de Puerto $1 no fue hallado en tu sistema. Quizás no está instalado o tu configuración del módulo es incorrecta. @@ -40,7 +39,6 @@ portsentry_ekill=No pude matar los procesos $1: $2 portsentry_estopped=Ya no está en ejecución portsentry_starterr=No pude arrancar portsentry portsentry_save=Salvar y Aplicar - hostsentry_title=Configuración de Centinela de Máquina (Hostsentry) hostsentry_below=(Detección lo login sospechoso) hostsentry_ecommand=El guión de hostsentry de python $1 no fue hallado en tu sistema. Quizás no está instalado o tu configuración del módulo es incorrecta. @@ -65,7 +63,6 @@ hostsentry_save=Salvar y Aplicar hostsentry_err=No pude salvar la configuración de hostsentry hostsentry_eignore='$1' no es un usuario válido de quien ignorar los login hostsentry_emultiple='$1' no es una máquina válida de la que ignorar múltiples login - logcheck_title=Configuración de Revisión de Diario (Logcheck) logcheck_ecommand=El comando logcheck $1 no fue hallado en tu sistema. Quizás no está instalado o tu configuración del módulo es incorrecta. logcheck_below=(Análisis de diario sospechoso) @@ -81,7 +78,6 @@ logcheck_save=Salvar y Aplicar logcheck_eto=La dirección de email falta o es inválida logcheck_runparts=La revisión de diario se ejecuta desde cron mediante el guión $1 logcheck_files=Archivos de diario que son monitorizados - mod_moduleLoginLogout=Grabar logins y logouts mod_moduleFirstLogin=Detecta el primer login por usuario mod_moduleForeignDomain=Detectar login desde dominio foráneo @@ -94,7 +90,6 @@ mod_moduleInvalidUtmp=Detectar entrada de utmp modificada mod_moduleHistorySuspicious=Detectar comandos sospechosos en historia mod_moduleNetworkDaemon=Detectar daemon dejado en ejecución mod_moduleFileExists=Detectar archivos sospechosos en directorio inicial - log_hostsentry=Salvada configuración de hostsentry log_portsentry=Salvada configuración de portsentry log_logcheck=Salvada configuración de logcheck diff --git a/sentry/lang/es.auto b/sentry/lang/es.auto deleted file mode 100644 index f66a50192..000000000 --- a/sentry/lang/es.auto +++ /dev/null @@ -1 +0,0 @@ -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. diff --git a/sentry/lang/eu.auto b/sentry/lang/eu.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/eu.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/fa.auto b/sentry/lang/fa.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/fa.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/fi.auto b/sentry/lang/fi.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/fi.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/fr.auto b/sentry/lang/fr.auto deleted file mode 100644 index ac654c39b..000000000 --- a/sentry/lang/fr.auto +++ /dev/null @@ -1,104 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/he.auto b/sentry/lang/he.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/he.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/hr.auto b/sentry/lang/hr.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/hr.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/hu.auto b/sentry/lang/hu.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/hu.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/it.auto b/sentry/lang/it.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/it.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/ja.auto b/sentry/lang/ja.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/ja.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/ko.auto b/sentry/lang/ko.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/ko.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/lt.auto b/sentry/lang/lt.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/lt.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/lv.auto b/sentry/lang/lv.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/lv.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/ms.auto b/sentry/lang/ms.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/ms.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/mt.auto b/sentry/lang/mt.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/mt.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/nl b/sentry/lang/nl index 8c683b59d..f7e001330 100644 --- a/sentry/lang/nl +++ b/sentry/lang/nl @@ -1,7 +1,6 @@ index_title=Beveiliging Sentries index_ecommands=Geen van de beveiligings opdrachten ($1, $2 or $3) zijn gevonden op uw systeem. Misschien is er nog niets geinstalleerd of uw module configuratie is niet correct. index_return=module menu - portsentry_title=Portsentry Configuratie portsentry_below=(Poort scan detectie) portsentry_ecommand=De Portsentry daemon $1 is niet gevonden op uw systeem. Misschien is het niet geinstalleerd, of uw module configuratie is niet correct. @@ -40,7 +39,6 @@ portsentry_ekill=Killen mislukt van de processen $1 : $2 portsentry_estopped=Niet langer werkend portsentry_starterr=Mislukt om portsentry te starten portsentry_save=Opslaan en Toevoegen - hostsentry_title=Hostsentry Configuratie hostsentry_below=(Verdachte login detectie) hostsentry_ecommand=De hostsentry python script $1 is niet gevonden op uw systeem. Misschien is het niet geinstalleerd, of uw module configuratie is niet correct. @@ -65,7 +63,6 @@ hostsentry_save=Opslaan en Toevoegen hostsentry_err=Mislukt om hostsentry configuratie op te slaan hostsentry_eignore='$1' is geen geldige gebruiker om logins te negeren met hostsentry_emultiple='$1' is geen geldige host om veelvoudig logins van te negeren - logcheck_title=Logcheck Configuratie logcheck_ecommand=De logcheck opdracht $1 is niet gevonden op uw systeem. Misschien is het niet geinstalleerd, of uw module configuratie is niet correct. logcheck_eversion=De logcheck opdracht $1 is niet de versie die Wemin verwachte. @@ -82,7 +79,6 @@ logcheck_save=Opslaan en Toevoegen logcheck_eto=Ontbrekend of ongeldig email adres logcheck_runparts=Log controle werkt door het cron script $1 logcheck_files=Log files worden in de gaten gehouden - mod_moduleLoginLogout=Opnemen inloggen en uitloggen mod_moduleFirstLogin=Detecteer eerst login door gebruiker mod_moduleForeignDomain=Detecteer login van buitenstaande domeinen @@ -95,7 +91,6 @@ mod_moduleInvalidUtmp=Detecteer gemodificeerde utmp ingangen mod_moduleHistorySuspicious=Detecteer verdachte opdrachten in historie mod_moduleNetworkDaemon=Detecteer daemon die blijft werken mod_moduleFileExists=Detecteer verdachte files in home directory - log_hostsentry=Hostsentry configuratie opgeslagen log_portsentry=Opgeslagen portsentry configuratie log_logcheck=Opgeslagen logcheck configuratie diff --git a/sentry/lang/no b/sentry/lang/no index 895a42d47..40e913baf 100644 --- a/sentry/lang/no +++ b/sentry/lang/no @@ -1,7 +1,6 @@ index_title=Sikkerhets-tjenester index_ecommands=Ingen av sikkerhets-tjenste kommandoene ($1, $2 eller $3) ble funnet på systemet ditt. Kanskje ingen av dem er installert, eller så er modulkonfigurasjonen feil. index_return=modul meny - portsentry_title=Portsentry konfigurasjon portsentry_below=)Port scan oppdaging) portsentry_ecommand=Portsentry daemonen $1 ble ikke funnet på systemet ditt. Kanskje den ikke er installert eller så er modulkonfigurasjonen feil. @@ -40,7 +39,6 @@ portsentry_ekill=Kunne ikke stoppe prosessene $1 : $2 portsentry_estopped=Kjører ikke lenger portsentry_starterr=Kunne ikke starte portsentry portsentry_save=Lagre og bruk - hostsentry_title=Hostsentry konfigurasjon hostsentry_below=(Oppdaging av mistenkelig innlogging) hostsentry_ecommand=Hostsentry pythonscriptet $1 ble ikke funnet på systemet ditt. Kanskje det ikke er installert eller så er modulkonfigurasjonen feil. @@ -65,7 +63,6 @@ hostsentry_save=Lagre og bruk hostsentry_err=Kunne ikke lagre hostsentry konfigurasjon hostsentry_eignore='$1' er ikke en gyldig bruker å ignorere innlogginger for hostsentry_emultiple='$1' er ikke en gyldig vert å ignorere flere innlogginger fra - logcheck_title=Logsjekk konfigurasjon logcheck_ecommand=Logsjekk kommandoen $1 ble ikke funnet på systemet ditt. Kanskje den ikke er installert, eller så er modulkonfigurasjonen feil. logcheck_eversion=Logsjekk kommandoen $1 er ikke på versjonen som Webmin forventer. @@ -82,7 +79,6 @@ logcheck_save=Lagre og bruk logcheck_eto=Manglende eller ugyldig e-post adresse logcheck_runparts=Logg sjekking kjøres fra cron med scriptet $1 logcheck_files=Loggfiler som blir overvåket - mod_moduleLoginLogout=Loggfør innlogginger og utlogginger mod_moduleFirstLogin=Oppdag første innlogging av bruker mod_moduleForeignDomain=Oppdag innlogging fra fremmed domene @@ -95,7 +91,6 @@ mod_moduleInvalidUtmp=Oppdag endret utmp oppføring mod_moduleHistorySuspicious=Oppdag mistenkelige kommandoer i historikk mod_moduleNetworkDaemon=Oppdag daemon som blir kjørende mod_moduleFileExists=Oppdag mistenkelige filer i hjemmekatalog - log_hostsentry=Lagret hostsentry konfigurasjon log_portsentry=Lagret portsentry konfigurasjon log_logcheck=Lagre logcheck konfigurasjon diff --git a/sentry/lang/pl.auto b/sentry/lang/pl.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/pl.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/pt.auto b/sentry/lang/pt.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/pt.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/pt_BR.auto b/sentry/lang/pt_BR.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/pt_BR.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/ro.auto b/sentry/lang/ro.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/ro.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/ru b/sentry/lang/ru index ce9ddc9ed..03de7312e 100644 --- a/sentry/lang/ru +++ b/sentry/lang/ru @@ -1,7 +1,6 @@ index_title=Система безопасности index_ecommands=Ни одна из команд системы безопасности ($1, $2 или $3) в вашей системе не обнаружена. Возможно, ни одна из них не установлена, или неверна конфигурация модуля. index_return=меню модуля - portsentry_title=Настройка portsentry portsentry_below=(Обнаружение сканирования портов) portsentry_ecommand=Демон portsentry $1 в вашей системе не обнаружен. Возможно, он не установлен, или неверна конфигурация модуля. @@ -40,7 +39,6 @@ portsentry_ekill=Не удалось снять процессы $1 : $2 portsentry_estopped=Более не работает portsentry_starterr=Не удалось запустить portsentry portsentry_save=Сохранить и применить - hostsentry_title=Настройка hostsentry hostsentry_below=(Обнаружение подозрительных попыток входа) hostsentry_ecommand=Сценарий python $1 в вашей системе не обнаружен. Возможно, он не установлен, или неверна конфигурация модуля. @@ -65,7 +63,6 @@ hostsentry_save=Сохранить и применить hostsentry_err=Не удалось сохранить конфигурацию hostsentry hostsentry_eignore='$1' не является корректным пользованием для игнорирования входов hostsentry_emultiple='$1' не является корректным узлом для игнорирования одновременных входов - logcheck_title=Настройка logcheck logcheck_ecommand=Команда logcheck $1 в вашей системе не обнаружена. Возможно, она не установлена, или неверна конфигурация модуля. logcheck_below=(Анализ подозрительных записей в журнале) @@ -81,7 +78,6 @@ logcheck_save=Сохранить и применить logcheck_eto=Почтовый адрес не указан или указан неверно logcheck_runparts=Проверка журнала запускается cron с помощью сценария $1 logcheck_files=Отслеживаемые файлы журнала - mod_moduleLoginLogout=Отслеживать входы и выходы из системы mod_moduleFirstLogin=Обнаруживать первый вход пользователя в систему mod_moduleForeignDomain=Обнаруживать входы с чужого домена @@ -94,7 +90,6 @@ mod_moduleInvalidUtmp=Обнаруживать изменение записей mod_moduleHistorySuspicious=Обнаруживать подозрительные команды в history mod_moduleNetworkDaemon=Обнаруживать оставленные для работы демоны mod_moduleFileExists=Обнаруживать подозрительные файлы в домашнем каталоге - log_hostsentry=Сохранена конфигурация hostsentry log_portsentry=Сохранена конфигурация portsentry log_logcheck=Сохранена конфигурация logcheck diff --git a/sentry/lang/ru.auto b/sentry/lang/ru.auto deleted file mode 100644 index f66a50192..000000000 --- a/sentry/lang/ru.auto +++ /dev/null @@ -1 +0,0 @@ -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. diff --git a/sentry/lang/sk.auto b/sentry/lang/sk.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/sk.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/sl.auto b/sentry/lang/sl.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/sl.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/sv.auto b/sentry/lang/sv.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/sv.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/th.auto b/sentry/lang/th.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/th.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/tr.auto b/sentry/lang/tr.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/tr.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/uk b/sentry/lang/uk index 0c84c9e23..45034d3dd 100644 --- a/sentry/lang/uk +++ b/sentry/lang/uk @@ -1,104 +1,99 @@ -index_title=Система безпеки -index_ecommands=Жодна з команд системи безпеки ($1, $2 чи $3) у вашій системі не виявлена. Можливо, жодна з них не встановлена, чи невірна конфігурація модуля. -index_return=меню модуля - -portsentry_title=Настроювання portsentry -portsentry_below=(Виявлення сканування портів) -portsentry_ecommand=Демон portsentry $1 у вашій системі не виявлений. Можливо, він не встановлений, чи невірна конфігурація модуля. -portsentry_eversion=Програма $1 не є демоном portsentry. Можливо він не встановлений, чи невірна конфігурація модуля. -portsentry_eversion2=У вашій системі встановленийі portsentry версії $2, а цей випуск Webmin підтримує тільки версію 1. -portsentry_version=Версія portsentry $1 -portsentry_header=Настроювання виявлення сканування портів -portsentry_tmode= Порти, що відслідковуються, TCP -portsentry_mode0=Для базового режиму - перераховані порти -portsentry_mode1=Для поліпшеного режиму - усі порти нижче $1, крім $2 -portsentry_umode= порти, ЩоВідслідковуються, UDP -portsentry_ignore=Вузли, трафік з який ігнорується -portsentry_tblock=Блокувати перевірки TCP -portsentry_ublock=Блокувати перевірки UDP -portsentry_trigger=Число з'єднань для спрацьовування блокування -portsentry_banner=Повідомлення для блокованих з'єднань -portsentry_kill=Виконати команду kill -portsentry_err=Не удалося зберегти настроювання portsentry -portsentry_etports='$1' не є коректним портом TCP для базового режиму -portsentry_etadv=Максимальний порт TCP для поліпшеного режиму чи не зазначений зазначений невірно -portsentry_etexc='$1' не є коректним портом, що виключається, TCP -portsentry_euports='$1' не є коректним портом UDP для базового режиму -portsentry_euadv=Максимальний порт TCP для поліпшеного режиму чи не зазначений зазначений невірно -portsentry_euexc='$1' не є коректним портом, що виключається, TCP -portsentry_etrigger=Кількість з'єднань для спрацьовування блокування чи не зазначене зазначено невірно -portsentry_eignore='$1' не є вірним ім'ям чи вузла адресою IP для ігнорування -portsentry_start=Запустити демони portsentry -portsentry_startdesc=Натискання на цю кнопку приведе до запуску демонів Portsentry за допомогою команди $1 в описаній вище конфігурації. -portsentry_stop=Зупинити демони portsentry -portsentry_stopdesc=Натискання на цю кнопку приведе до завершення роботи запущених демонів portsentry. При цьому виявлення сканування портів буде відключено. -portsentry_apply=Застосувати -portsentry_applydesc=Натискання на цю кнопку приведе до застосування поточної конфігурації. Для цього демони portsentry буде зупинені і запущені заново за допомогою команди $1. -portsentry_applyerr=Не удалося застосувати конфігурацію. -portsentry_stoperr=Не удалося зупинити portsentry -portsentry_ekill=Не удалося зняти процеси $1 : $2 -portsentry_estopped=Більш не працює -portsentry_starterr=Не удалося запустити portsentry -portsentry_save=Зберегти і застосувати - -hostsentry_title=Настроювання hostsentry -hostsentry_below=(Виявлення підозрілих спроб входу) -hostsentry_ecommand=Сценарій python $1 у вашій системі не виявлений. Можливо, він не встановлений, чи невірна конфігурація модуля. -hostsentry_header=Настроювання виявлення підозрілих спроб входу -hostsentry_wtmp=Файл записів входів у систему -hostsentry_ignore=Користувачі, спроби входу яких ігнорувати -hostsentry_mods=Модулі hostsentry
у порядку проходження -hostsentry_start=Запустити демон hostsentry -hostsentry_startdesc=Натискання на цю кнопку приведе до запуску демона hostsentry за допомогою команди $1 в описаній вище конфігурації. -hostsentry_stop=Зупинити демон hostsentry -hostsentry_stopdesc=Натискання на цю кнопку приведе до зупинки запущеного демона hostsentry. При цьому виявлення підозрілих спроб входу буде відключено. -hostsentry_apply=Застосувати -hostsentry_applydesc=Натискання на цю кнопку приведе до застосування поточної конфігурації шляхом зупинки запущеного демона hostsentry і його перезапуску командою $1. -hostsentry_foreign=Вузли, що не вважаються чужими -hostsentry_multiple=Вузли, з яких дозволено входити кілька разів одночасно -hostsentry_applyerr=Не удалося застосувати конфігурацію -hostsentry_stoperr=Не удалося зупинити hostsentry -hostsentry_ekill=Не удалося зняти процес $1 : $2 -hostsentry_estopped=Більш не виконується -hostsentry_starterr=Не удалося запустити hostsentry -hostsentry_save=Зберегти і застосувати -hostsentry_err=Не удалося зберегти конфігурацію hostsentry -hostsentry_eignore='$1' не є коректним користуванням для ігнорування входів -hostsentry_emultiple='$1' не є коректним вузлом для ігнорування одночасних входів - -logcheck_title=Настроювання logcheck -logcheck_ecommand=Команда logcheck $1 у вашій системі не виявлена. Можливо, вона не встановлена, чи невірна конфігурація модуля. -logcheck_below=(Аналіз підозрілих записів у журналі) -logcheck_header=Настроювання перевірки журналу -logcheck_to=Відправляти звіти на -logcheck_hacking=Повідомлення про спроби злому -logcheck_violations=Повідомлення про порушення -logcheck_violations_ign=Крім -logcheck_ignore=Ігноровані повідомлення -logcheck_disabled=Планова перевірка журналу відключена -logcheck_enabled=Перевіряти журнал у зазначений час.. -logcheck_save=Зберегти і застосувати -logcheck_eto=Поштова адреса чи не зазначена зазначений невірно -logcheck_runparts=Перевірка журналу запускається cron за допомогою сценарію $1 -logcheck_files= файли журналу, ЩоВідслідковуються - -mod_moduleLoginLogout=Відслідковувати входи і виходи із системи -mod_moduleFirstLogin=Виявляти перший вхід користувача в систему -mod_moduleForeignDomain=Виявляти входи з чужого домену -mod_moduleRhostsCheck=Виявляти небезпечні файли .rhosts -mod_moduleHistoryTruncated=Виявляти обрізання файлу history -mod_moduleOddDirnames=Виявляти незвичайні домашні каталоги -mod_moduleMultipleLogins=Виявляти кілька одночасних входів -mod_moduleOddLoginTime=Виявляти незвичайний час входу -mod_moduleInvalidUtmp=Виявляти зміна записів utmp -mod_moduleHistorySuspicious=Виявляти підозрілі команди в history -mod_moduleNetworkDaemon=Виявляти залишені для роботи демони -mod_moduleFileExists=Виявляти підозрілі файли в домашньому каталозі - -log_hostsentry=Збережена конфігурація hostsentry -log_portsentry=Збережена конфігурація portsentry -log_logcheck=Збережена конфігурація logcheck -log_hostsentry_start=Демон hostsentry запущений -log_hostsentry_stop=Демон hostsentry зупинений -log_portsentry_start=Демон portsentry запущений -log_portsentry_stop=Демон portsentry зупинений +index_title=Система безпеки +index_ecommands=Жодна з команд системи безпеки ($1, $2 чи $3) у вашій системі не виявлена. Можливо, жодна з них не встановлена, чи невірна конфігурація модуля. +index_return=меню модуля +portsentry_title=Настроювання portsentry +portsentry_below=(Виявлення сканування портів) +portsentry_ecommand=Демон portsentry $1 у вашій системі не виявлений. Можливо, він не встановлений, чи невірна конфігурація модуля. +portsentry_eversion=Програма $1 не є демоном portsentry. Можливо він не встановлений, чи невірна конфігурація модуля. +portsentry_eversion2=У вашій системі встановленийі portsentry версії $2, а цей випуск Webmin підтримує тільки версію 1. +portsentry_version=Версія portsentry $1 +portsentry_header=Настроювання виявлення сканування портів +portsentry_tmode= Порти, що відслідковуються, TCP +portsentry_mode0=Для базового режиму - перераховані порти +portsentry_mode1=Для поліпшеного режиму - усі порти нижче $1, крім $2 +portsentry_umode= порти, ЩоВідслідковуються, UDP +portsentry_ignore=Вузли, трафік з який ігнорується +portsentry_tblock=Блокувати перевірки TCP +portsentry_ublock=Блокувати перевірки UDP +portsentry_trigger=Число з'єднань для спрацьовування блокування +portsentry_banner=Повідомлення для блокованих з'єднань +portsentry_kill=Виконати команду kill +portsentry_err=Не удалося зберегти настроювання portsentry +portsentry_etports='$1' не є коректним портом TCP для базового режиму +portsentry_etadv=Максимальний порт TCP для поліпшеного режиму чи не зазначений зазначений невірно +portsentry_etexc='$1' не є коректним портом, що виключається, TCP +portsentry_euports='$1' не є коректним портом UDP для базового режиму +portsentry_euadv=Максимальний порт TCP для поліпшеного режиму чи не зазначений зазначений невірно +portsentry_euexc='$1' не є коректним портом, що виключається, TCP +portsentry_etrigger=Кількість з'єднань для спрацьовування блокування чи не зазначене зазначено невірно +portsentry_eignore='$1' не є вірним ім'ям чи вузла адресою IP для ігнорування +portsentry_start=Запустити демони portsentry +portsentry_startdesc=Натискання на цю кнопку приведе до запуску демонів Portsentry за допомогою команди $1 в описаній вище конфігурації. +portsentry_stop=Зупинити демони portsentry +portsentry_stopdesc=Натискання на цю кнопку приведе до завершення роботи запущених демонів portsentry. При цьому виявлення сканування портів буде відключено. +portsentry_apply=Застосувати +portsentry_applydesc=Натискання на цю кнопку приведе до застосування поточної конфігурації. Для цього демони portsentry буде зупинені і запущені заново за допомогою команди $1. +portsentry_applyerr=Не удалося застосувати конфігурацію. +portsentry_stoperr=Не удалося зупинити portsentry +portsentry_ekill=Не удалося зняти процеси $1 : $2 +portsentry_estopped=Більш не працює +portsentry_starterr=Не удалося запустити portsentry +portsentry_save=Зберегти і застосувати +hostsentry_title=Настроювання hostsentry +hostsentry_below=(Виявлення підозрілих спроб входу) +hostsentry_ecommand=Сценарій python $1 у вашій системі не виявлений. Можливо, він не встановлений, чи невірна конфігурація модуля. +hostsentry_header=Настроювання виявлення підозрілих спроб входу +hostsentry_wtmp=Файл записів входів у систему +hostsentry_ignore=Користувачі, спроби входу яких ігнорувати +hostsentry_mods=Модулі hostsentry
у порядку проходження +hostsentry_start=Запустити демон hostsentry +hostsentry_startdesc=Натискання на цю кнопку приведе до запуску демона hostsentry за допомогою команди $1 в описаній вище конфігурації. +hostsentry_stop=Зупинити демон hostsentry +hostsentry_stopdesc=Натискання на цю кнопку приведе до зупинки запущеного демона hostsentry. При цьому виявлення підозрілих спроб входу буде відключено. +hostsentry_apply=Застосувати +hostsentry_applydesc=Натискання на цю кнопку приведе до застосування поточної конфігурації шляхом зупинки запущеного демона hostsentry і його перезапуску командою $1. +hostsentry_foreign=Вузли, що не вважаються чужими +hostsentry_multiple=Вузли, з яких дозволено входити кілька разів одночасно +hostsentry_applyerr=Не удалося застосувати конфігурацію +hostsentry_stoperr=Не удалося зупинити hostsentry +hostsentry_ekill=Не удалося зняти процес $1 : $2 +hostsentry_estopped=Більш не виконується +hostsentry_starterr=Не удалося запустити hostsentry +hostsentry_save=Зберегти і застосувати +hostsentry_err=Не удалося зберегти конфігурацію hostsentry +hostsentry_eignore='$1' не є коректним користуванням для ігнорування входів +hostsentry_emultiple='$1' не є коректним вузлом для ігнорування одночасних входів +logcheck_title=Настроювання logcheck +logcheck_ecommand=Команда logcheck $1 у вашій системі не виявлена. Можливо, вона не встановлена, чи невірна конфігурація модуля. +logcheck_below=(Аналіз підозрілих записів у журналі) +logcheck_header=Настроювання перевірки журналу +logcheck_to=Відправляти звіти на +logcheck_hacking=Повідомлення про спроби злому +logcheck_violations=Повідомлення про порушення +logcheck_violations_ign=Крім +logcheck_ignore=Ігноровані повідомлення +logcheck_disabled=Планова перевірка журналу відключена +logcheck_enabled=Перевіряти журнал у зазначений час.. +logcheck_save=Зберегти і застосувати +logcheck_eto=Поштова адреса чи не зазначена зазначений невірно +logcheck_runparts=Перевірка журналу запускається cron за допомогою сценарію $1 +logcheck_files= файли журналу, ЩоВідслідковуються +mod_moduleLoginLogout=Відслідковувати входи і виходи із системи +mod_moduleFirstLogin=Виявляти перший вхід користувача в систему +mod_moduleForeignDomain=Виявляти входи з чужого домену +mod_moduleRhostsCheck=Виявляти небезпечні файли .rhosts +mod_moduleHistoryTruncated=Виявляти обрізання файлу history +mod_moduleOddDirnames=Виявляти незвичайні домашні каталоги +mod_moduleMultipleLogins=Виявляти кілька одночасних входів +mod_moduleOddLoginTime=Виявляти незвичайний час входу +mod_moduleInvalidUtmp=Виявляти зміна записів utmp +mod_moduleHistorySuspicious=Виявляти підозрілі команди в history +mod_moduleNetworkDaemon=Виявляти залишені для роботи демони +mod_moduleFileExists=Виявляти підозрілі файли в домашньому каталозі +log_hostsentry=Збережена конфігурація hostsentry +log_portsentry=Збережена конфігурація portsentry +log_logcheck=Збережена конфігурація logcheck +log_hostsentry_start=Демон hostsentry запущений +log_hostsentry_stop=Демон hostsentry зупинений +log_portsentry_start=Демон portsentry запущений +log_portsentry_stop=Демон portsentry зупинений diff --git a/sentry/lang/uk.auto b/sentry/lang/uk.auto deleted file mode 100644 index f66a50192..000000000 --- a/sentry/lang/uk.auto +++ /dev/null @@ -1 +0,0 @@ -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. diff --git a/sentry/lang/ur.auto b/sentry/lang/ur.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/ur.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/vi.auto b/sentry/lang/vi.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/vi.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/zh.auto b/sentry/lang/zh.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/zh.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/sentry/lang/zh_TW.auto b/sentry/lang/zh_TW.auto deleted file mode 100644 index e59886be5..000000000 --- a/sentry/lang/zh_TW.auto +++ /dev/null @@ -1,105 +0,0 @@ -index_title=Security Sentries -index_ecommands=None of the security sentry commands ($1, $2 or $3) were found on your system. Maybe none are installed, or your module configuration is incorrect. -index_return=module menu - -portsentry_title=Portsentry Configuration -portsentry_below=(Port scan detection) -portsentry_ecommand=The Portsentry daemon $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion=The program $1 does not appear to be the Portsentry daemon. Maybe it is not installed, or your module configuration is incorrect. -portsentry_eversion2=The version of Portsentry installed on your system is $2, but Webmin only supports version 1 in this release. -portsentry_version=Portsentry version $1 -portsentry_header=Port scan detection options -portsentry_tmode=TCP ports to monitor -portsentry_mode0=For basic mode, listed ports -portsentry_mode1=For advanced mode, all ports below $1 except $2 -portsentry_umode=UDP ports to monitor -portsentry_ignore=Hosts to ignore traffic from -portsentry_tblock=Block TCP probes -portsentry_ublock=Block UDP probes -portsentry_trigger=Number of connections before triggering blocking -portsentry_banner=Message for blocked connections -portsentry_kill=Run kill command -portsentry_err=Failed to save portsentry options -portsentry_etports='$1' is not a valid basic mode TCP port -portsentry_etadv=Missing or invalid maximum TCP port for advanced mode -portsentry_etexc='$1' is not a valid excluded TCP port -portsentry_euports='$1' is not a valid basic mode UDP port -portsentry_euadv=Missing or invalid maximum UDP port for advanced mode -portsentry_euexc='$1' is not a valid excluded UDP port -portsentry_etrigger=Missing or invalid number of connections before triggering -portsentry_eignore='$1' is not a valid hostname or IP addres to ignore -portsentry_start=Start Portsentry Daemons -portsentry_startdesc=Click this button to start the Portsentry daemons with the command $1, using the configuration options above. -portsentry_stop=Stop Portsentry Daemons -portsentry_stopdesc=Click this button to stop the running Portsentry daemons. This will immediately cease all port-scan detection. -portsentry_apply=Apply Configuration -portsentry_applydesc=Click this button to apply the current configuration by stopping the Portsentry daemons and re-starting them with the command $1. -portsentry_applyerr=Failed to apply configuration -portsentry_stoperr=Failed to stop portsentry -portsentry_ekill=Failed to kill processes $1 : $2 -portsentry_estopped=No longer running -portsentry_starterr=Failed to start portsentry -portsentry_save=Save and Apply - -hostsentry_title=Hostsentry Configuration -hostsentry_below=(Suspicious login detection) -hostsentry_ecommand=The hostsentry python script $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -hostsentry_header=Suspicious login detection options -hostsentry_wtmp=Logins record file -hostsentry_ignore=Users to ignore logins by -hostsentry_mods=Hostsentry modules
in processing order -hostsentry_start=Start Hostsentry Daemon -hostsentry_startdesc=Click this button to start the Hostsentry daemon with the command $1, using the configuration options above. -hostsentry_stop=Stop Hostsentry Daemon -hostsentry_stopdesc=Click this button to stop the running Hostsentry daemon. This will immediately cease all suspicious login detection. -hostsentry_apply=Apply Configuration -hostsentry_applydesc=Click this button to apply the current configuration by stopping the Hostsentry daemon and re-starting it with the command $1. -hostsentry_foreign=Hosts not to consider foreign -hostsentry_multiple=Hosts to trust multiple logins from -hostsentry_applyerr=Failed to apply configuration -hostsentry_stoperr=Failed to stop hostsentry -hostsentry_ekill=Failed to kill process $1 : $2 -hostsentry_estopped=No longer running -hostsentry_starterr=Failed to start hostsentry -hostsentry_save=Save and Apply -hostsentry_err=Failed to save hostsentry configuration -hostsentry_eignore='$1' is not a valid user to ignore logins by -hostsentry_emultiple='$1' is not a valid host to ignore multiple logins from - -logcheck_title=Logcheck Configuration -logcheck_ecommand=The logcheck command $1 was not found on your system. Maybe it is not installed, or your module configuration is incorrect. -logcheck_eversion=The logcheck command $1 is not the version expected by Webmin. -logcheck_below=(Suspicious log analysis) -logcheck_header=Logfile checking options -logcheck_to=Email reports to -logcheck_hacking=Hacking log messages -logcheck_violations=Violation log messages -logcheck_violations_ign=Except for -logcheck_ignore=Ignored log messages -logcheck_disabled=Scheduled log checking disabled -logcheck_enabled=Check logs at selected times.. -logcheck_save=Save and Apply -logcheck_eto=Missing or invalid email address -logcheck_runparts=Log checking is run from cron by script $1 -logcheck_files=Log files being monitored - -mod_moduleLoginLogout=Record logins and logouts -mod_moduleFirstLogin=Detect first login by user -mod_moduleForeignDomain=Detect login from foreign domain -mod_moduleRhostsCheck=Detect unsafe .rhosts file -mod_moduleHistoryTruncated=Detect history file truncation -mod_moduleOddDirnames=Detect odd home directory -mod_moduleMultipleLogins=Detect multiple simultaneous logins -mod_moduleOddLoginTime=Detect odd login time -mod_moduleInvalidUtmp=Detect modified utmp entry -mod_moduleHistorySuspicious=Detect suspicious commands in history -mod_moduleNetworkDaemon=Detect daemon left running -mod_moduleFileExists=Detect suspicious files in home directory - -log_hostsentry=Saved hostsentry configuration -log_portsentry=Saved portsentry configuration -log_logcheck=Saved logcheck configuration -log_hostsentry_start=Started hostsentry daemon -log_hostsentry_stop=Stopped hostsentry daemon -log_portsentry_start=Started portsentry daemon -log_portsentry_stop=Stopped portsentry daemon diff --git a/servers/lang/de b/servers/lang/de index 83e389bed..58e8b039d 100644 --- a/servers/lang/de +++ b/servers/lang/de @@ -159,4 +159,4 @@ config_typeauto=Automatisch email_regsubject=System $1 registriert email_reg=Das System $1 wurde automatisch registriert. email_unregsubject=System $1 abgemeldet -email_unreg=Das System $1 wurde automatisch abgemeldet. +email_unreg=Das System $1 wurde automatisch abgemeldet. \ No newline at end of file diff --git a/servers/lang/zh b/servers/lang/zh index e1a92a537..856f29045 100644 --- a/servers/lang/zh +++ b/servers/lang/zh @@ -160,3 +160,4 @@ email_regsubject=系统 $1 已注册 email_reg=系统已自动执行 $1 email_unregsubject=系统 $1 未注册 email_unreg=系统 $1 已自动取消注册。 +__norefs=1 diff --git a/sgiexports/lang/de b/sgiexports/lang/de index f97b74b1c..b1ea6104d 100644 --- a/sgiexports/lang/de +++ b/sgiexports/lang/de @@ -36,4 +36,4 @@ save_eaccess=Keine Hosts für Mount-Zugriff eingegeben log_create_export=Export von $1 erstellt log_delete_export=Export von $1 gelöscht log_modify_export=Export von $1 geändert -log_apply=Konfiguration angewendet +log_apply=Konfiguration angewendet \ No newline at end of file diff --git a/shell/lang/de b/shell/lang/de index 1e38628da..cab362478 100644 --- a/shell/lang/de +++ b/shell/lang/de @@ -15,4 +15,4 @@ acl_shellenv=Umgebung des ausgewählten Benutzers verwenden? acl_chroot=In Verzeichnis chrooten log_run=Befehl $1 ausgeführt -log_clear=Verlauf gelöscht +log_clear=Verlauf gelöscht \ No newline at end of file diff --git a/shellinabox/lang/af.auto b/shellinabox/lang/af.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/af.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/ar.auto b/shellinabox/lang/ar.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/ar.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/be.auto b/shellinabox/lang/be.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/be.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/bg.auto b/shellinabox/lang/bg.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/bg.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/ca.auto b/shellinabox/lang/ca.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/ca.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/cs.auto b/shellinabox/lang/cs.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/cs.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/da.auto b/shellinabox/lang/da.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/da.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/el.auto b/shellinabox/lang/el.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/el.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/es.auto b/shellinabox/lang/es.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/es.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/eu.auto b/shellinabox/lang/eu.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/eu.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/fa.auto b/shellinabox/lang/fa.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/fa.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/fi.auto b/shellinabox/lang/fi.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/fi.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/fr.auto b/shellinabox/lang/fr.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/fr.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/he.auto b/shellinabox/lang/he.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/he.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/hr.auto b/shellinabox/lang/hr.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/hr.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/hu.auto b/shellinabox/lang/hu.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/hu.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/it.auto b/shellinabox/lang/it.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/it.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/ja.auto b/shellinabox/lang/ja.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/ja.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/ko.auto b/shellinabox/lang/ko.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/ko.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/lt.auto b/shellinabox/lang/lt.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/lt.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/lv.auto b/shellinabox/lang/lv.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/lv.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/ms.auto b/shellinabox/lang/ms.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/ms.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/mt.auto b/shellinabox/lang/mt.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/mt.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/nl.auto b/shellinabox/lang/nl.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/nl.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/no.auto b/shellinabox/lang/no.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/no.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/pl.auto b/shellinabox/lang/pl.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/pl.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/pt.auto b/shellinabox/lang/pt.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/pt.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/pt_BR.auto b/shellinabox/lang/pt_BR.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/pt_BR.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/ro.auto b/shellinabox/lang/ro.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/ro.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/ru.auto b/shellinabox/lang/ru.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/ru.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/sk.auto b/shellinabox/lang/sk.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/sk.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/sl.auto b/shellinabox/lang/sl.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/sl.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/sv.auto b/shellinabox/lang/sv.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/sv.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/th.auto b/shellinabox/lang/th.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/th.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/tr.auto b/shellinabox/lang/tr.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/tr.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/uk.auto b/shellinabox/lang/uk.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/uk.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/ur.auto b/shellinabox/lang/ur.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/ur.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/vi.auto b/shellinabox/lang/vi.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/vi.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/zh.auto b/shellinabox/lang/zh.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/zh.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shellinabox/lang/zh_TW.auto b/shellinabox/lang/zh_TW.auto deleted file mode 100644 index cd4cd0d2b..000000000 --- a/shellinabox/lang/zh_TW.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecpu=This module only runs on x86 Linux systems. diff --git a/shorewall/lang/de b/shorewall/lang/de index 98cdb4205..25a3dd1db 100644 --- a/shorewall/lang/de +++ b/shorewall/lang/de @@ -478,4 +478,4 @@ params_edit=Benutzerdefinierten Parameter bearbeiten params_create=Benutzerdefinierten Parameter erstellen params_header=Details des benutzerdefinierten Parameters params_err=Fehler beim Speichern des benutzerdefinierten Parameters -params_varname=Ungültiger Parametername (muss ein gültiger Shell-Variablenname sein) +params_varname=Ungültiger Parametername (muss ein gültiger Shell-Variablenname sein) \ No newline at end of file diff --git a/shorewall6/lang/de b/shorewall6/lang/de index bd2416a85..8fff2d081 100644 --- a/shorewall6/lang/de +++ b/shorewall6/lang/de @@ -464,4 +464,4 @@ params_edit=Benutzerdefinierten Parameter bearbeiten params_create=Benutzerdefinierten Parameter erstellen params_header=Details zum benutzerdefinierten Parameter params_err=Speichern des benutzerdefinierten Parameters fehlgeschlagen -params_varname=Ungültiger Parametername (muss ein gültiger Shell-Variablenname sein) +params_varname=Ungültiger Parametername (muss ein gültiger Shell-Variablenname sein) \ No newline at end of file diff --git a/smart-status/lang/de b/smart-status/lang/de index 01a390570..6df8133c1 100644 --- a/smart-status/lang/de +++ b/smart-status/lang/de @@ -55,4 +55,4 @@ ext_ok=.. Test erfolgreich gestartet. Siehe den Laufwerksstatus auf der Hauptsei data_title=Datensammlungs-Test data_doing=Offline-Datensammlung von $1 wird gestartet .. data_failed=.. fehlgeschlagen! -data_ok=.. Sammlung erfolgreich gestartet. Siehe den Laufwerksstatus auf der Hauptseite des Moduls für die Ergebnisse. +data_ok=.. Sammlung erfolgreich gestartet. Siehe den Laufwerksstatus auf der Hauptseite des Moduls für die Ergebnisse. \ No newline at end of file diff --git a/smf/lang/de b/smf/lang/de index 3d64d0879..f3489d41b 100644 --- a/smf/lang/de +++ b/smf/lang/de @@ -1,5 +1,7 @@ cmds_run=Ausgeführte Befehle zur Generierung dieser Seite -whats_this_title=Was ist das? + +close_window=Fenster schließen + state_enable=Aktivieren state_disable=Deaktivieren state_refresh=Aktualisieren @@ -7,6 +9,7 @@ state_restart=Neustarten state_maintenance=Wartung state_degraded=Herabgestuft state_clear=Löschen + index_title=Service Management Facility index_detail=SMF-Dienstliste index_svc_type=Diensttyp auswählen @@ -27,32 +30,38 @@ index_NSTATE=NÄCHSTER ZUSTAND index_SCOPE=UMFANG index_STIME=STARTZEIT index_deleteconfirm=Möchten Sie die ausgewählten Dienste wirklich dauerhaft löschen? + search_instance_title=Suche search_instance_detail=Dienstinstanz(en) suchen/browsen search_instance_go=Los! search_instance_browse=Dienste durchsuchen search_instance_noresults=Keine Ergebnisse für diese Suche! + instance_viewer_title=Instanzinformationen instance_viewer_detail=Details zur Instanz instance_viewer_goto_pgroup_editor=Eigenschaftsgruppen/Eigenschaften anzeigen/bearbeiten instance_viewer_goto_dep_viewer=Abhängigkeitsbäume anzeigen + dep_viewer_title=Abhängigkeiten/Abhängige dep_viewer_detail=Abhängigkeitsbaum für Instanz dep_viewer_apply=Auf ausgewählte Elemente anwenden dep_viewer_depy_info=Abhängigkeitsbaum dep_viewer_dept_info=Baum der Abhängigen dep_viewer_back=Instanzanzeige + state_editor_title=Dienstzustandsinformationen state_editor_detail=Details zum Instanzzustand state_editor_stateinfo=Instanzzustandsinformationen state_editor_apply=Auf ausgewählte Elemente anwenden state_editor_depy_info=Abhängigkeitsinformationen state_editor_dept_info=Informationen zu Abhängigen + log_viewer_title=Logdatei-Anzeige log_viewer_detail=Logdatei (Ende) anzeigen log_viewer_show_last=Letzte anzeigen log_viewer_num_lines=Zeilen in log_viewer_submit=Ansicht aktualisieren + property_group_editor_title=Eigenschaftsgruppeninformationen property_group_editor_detail=Eigenschaftsgruppen für Dienst property_group_editor_addsinst=Dienst/Instanz auswählen @@ -68,6 +77,7 @@ property_group_editor_sinst=Dienst/Instanz property_group_editor_pgroup_name=Name der Eigenschaftsgruppe property_group_editor_pgroup_type=Typ der Eigenschaftsgruppe property_group_editor_back=Instanzanzeige + property_editor_title=Eigenschaftsinformationen property_editor_detail=Eigenschaften für Dienst/Eigenschaftsgruppe property_editor_addprop=Neue Eigenschaft hinzufügen @@ -84,8 +94,7 @@ property_editor_prop_type=Eigenschaftstyp property_editor_prop_value=Eigenschaftswert property_editor_update=Aktualisieren property_editor_back=Eigenschaftsgruppen -whats_this=(Was ist das?) -close_window=Fenster schließen + svc_chooser_titlesvc=Dienst-FMRI auswählen svc_chooser_titleinst=Dienstinstanz-FMRI auswählen svc_chooser_titleboth=Dienst/Instanz-FMRI auswählen @@ -96,6 +105,7 @@ path_chooser_title=Pfad-FMRI auswählen path_chooser_ok=OK path_chooser_cancel=Abbrechen path_chooser_path=Pfad-FMRI-Baumstandort $1 + editserv_title=SMF-Dienst bearbeiten editserv_newtitle=Neuen SMF-Dienst erstellen editserv_propviewer=Dienst anzeigen/erstellen/bearbeiten @@ -155,6 +165,7 @@ editserv_skip=Überspringen editserv_clear=Löschen editserv_restarter_fmri=Neustarter-FMRI editserv_dependency=Abhängigkeit + editstate_detail=Dienstzustand bearbeiten editstate_stateinfo=Instanzzustandsinformationen editstate_depy_detail=Abhängigkeitsinformationen zur Instanz @@ -166,6 +177,9 @@ editstate_restart=Neustarten editstate_clear=Löschen editstate_maintenance=Wartung editstate_degraded=Herabgestuft + +whats_this=(Was ist das?) +whats_this_title=Was ist das? whats_this_stateinfo=Es werden Informationen zum Dienstinstanzzustand angezeigt, wie sie vom svcs-Befehl ermittelt wurden. Siehe: svcs(1). Siehe: smf(5). whats_this_extraopts=Aktivieren Sie diese zusätzlichen Optionen und klicken Sie auf „Ansicht aktualisieren“, wenn Sie sie in der Dienstliste unten sehen möchten. Die Bedeutung der Optionen finden Sie in der svcs-Manpage. Siehe: svcs(1). whats_this_enabledonly=Wählen Sie, ob nur aktivierte Dienste angezeigt werden sollen oder alle Dienste (aktivierte und deaktivierte). @@ -180,7 +194,6 @@ whats_this_NSTATE=Der nächste Zustand des Dienstes, nützlich, wenn der Dienst whats_this_SCOPE=Der Gültigkeitsbereich der Dienstinstanz. Siehe: smf(5). Siehe: svcs(1). whats_this_STIME=Die Zeit (falls heute) oder das Datum, an dem der Dienst den aktuellen Zustand erreicht hat. Siehe: smf(5). Siehe: svcs(1). whats_this_Select=Wählen Sie die Liste der Dienste aus, die Sie hier aktivieren/deaktivieren/aktualisieren usw. möchten. - whats_this_service_detail=Geben Sie hier die obersten Dienstinformationen an/bearbeiten Sie diese: Dienstname, Versionsnummer, Paketname für das Manifest und Stabilität. Siehe: smf(5). Siehe: svccfg(1M). Siehe: service_bundle(4). whats_this_bundle_name=Name des Dienstpakets im Manifest. Mehrere Dienste können in einem Manifest gebündelt werden, aber der Name hier ist nicht wichtig. Bei bereits vorhandenen Diensten wird es auf Export gesetzt, da svccfg dies tut, wenn es ein Manifest aus dem SMF-Repository exportiert. Siehe: svccfg(1M). Siehe: service_bundle(4). whats_this_service_name=Dienstname. Die Konvention besteht darin, das Format [allgemeine_Dienstkategorie]/[Name] zu verwenden. Kategorien, die bereits bereitgestellt werden, umfassen Anwendung (höhere Anwendungen), Meilenstein (Sammlungen anderer Dienste, wie z.B. Namensdienste), Plattform (plattformbezogene Dienste), System (Solaris-Systemdienste), Gerät (gerätbezogene Dienste), Netzwerk (Netzwerk-/Internetdienste) und Standort (standortspezifische Beschreibungen). Sie können natürlich auch Ihre eigene Kategorie angeben, aber die meisten Dienste sollten bequem in eine der oben genannten Kategorien passen. Siehe: smf(5). @@ -223,6 +236,7 @@ whats_this_man_manpath=Geben Sie den Manpath an. Siehe: man(1). whats_this_template_detail=Geben Sie Details zum Dienst, seinen allgemein gebräuchlichen Namen und eine Beschreibung an, was der Dienst macht. whats_this_template_common_name=Geben Sie den allgemeinen Namen des Dienstes an. whats_this_template_description=Beschreiben Sie den Dienst. + wizard_back=Zurück wizard_next=Weiter wizard_add=Hinzufügen @@ -230,6 +244,7 @@ wizard_update=Aktualisieren wizard_new=Neu wizard_remove=Entfernen wizard_finish=Fertigstellen + smfwizard_title=SMF-Dienst erstellen smfwizard_service_heading=Dienstinformationen eingeben smfwizard_service_description=Geben Sie hier die obersten Dienstinformationen an/bearbeiten Sie diese. Für den Dienstnamen ist die Konvention, das Format [allgemeine_Dienstkategorie]/[Name] zu verwenden. Kategorien, die bereits bereitgestellt werden, umfassen Anwendung (höhere Anwendungen), Meilenstein (Sammlungen anderer Dienste, wie z.B. Namensdienste), Plattform (plattformbezogene Dienste), System (Solaris-Systemdienste), Gerät (gerätbezogene Dienste), Netzwerk (Netzwerk-/Internetdienste) und Standort (standortspezifische Beschreibungen). Sie können natürlich auch Ihre eigene Kategorie angeben, aber die meisten Dienste sollten bequem in eine der oben genannten Kategorien passen. Geben Sie außerdem eine positive Versionsnummer an. Siehe: smf(5). Siehe: svccfg(1M). Siehe: service_bundle(4). @@ -322,4 +337,4 @@ smfwizard_manpage_title_error=*Der Titel darf nicht leer sein!* smfwizard_manpage_section=Manpage-Sektion eingeben smfwizard_manpage_section_error=*Die Sektion darf nicht leer sein!* smfwizard_manpage_manpath=Manpath eingeben -smfwizard_manpage_manpath_error=*Der Manpath darf nicht leer sein!* +smfwizard_manpage_manpath_error=*Der Manpath darf nicht leer sein!* \ No newline at end of file diff --git a/software/lang/de b/software/lang/de index d8d934fff..c30202dab 100644 --- a/software/lang/de +++ b/software/lang/de @@ -475,4 +475,4 @@ IPKG_install_packagedesc=Dieses Paket auf Ihrem System installieren IPKG_noupgrade=Nichts zu aktualisieren IPKG-edit_title=IPKG-Paket verwalten IPKG_update_avail=Verfügbare Updates: -IPKG_not_installed=Paket ist nicht installiert +IPKG_not_installed=Paket ist nicht installiert \ No newline at end of file diff --git a/spam/lang/de b/spam/lang/de index 9f9eac469..d40264fe7 100644 --- a/spam/lang/de +++ b/spam/lang/de @@ -192,6 +192,7 @@ priv_escore=Fehlende oder ungültige Punktzahl für die Spam-Phrase '$1' usually=Normalerweise $1 ecannot=Sie dürfen diese Seite nicht verwenden + setup_title=Procmail für SpamAssassin einrichten setup_desc_webmin=Dieses Formular kann verwendet werden, um Procmail in $1 so einzurichten, dass SpamAssassin auf alle empfangenen E-Mail-Nachrichten angewendet wird. Dies wird jedoch nur Auswirkungen haben, wenn Ihr Mailserver für die Verwendung von Procmail für die lokale Zustellung konfiguriert wurde oder wenn die .forward-Dateien von Benutzern so eingerichtet sind, dass Procmail verwendet wird. setup_desc_usermin=Dieses Formular kann verwendet werden, um Procmail in $1 so einzurichten, dass SpamAssassin auf alle an Ihr Konto gesendeten E-Mail-Nachrichten angewendet wird. Dies wird jedoch nur Auswirkungen haben, wenn der Mailserver für die Verwendung von Procmail für die lokale Zustellung konfiguriert wurde oder wenn die .forward-Datei so eingerichtet ist, dass alle E-Mails an Procmail weitergeleitet werden. @@ -426,4 +427,4 @@ manual_title=Konfigurationsdateien bearbeiten manual_file=Konfigurationsdatei bearbeiten: manual_ok=OK manual_efile=Ungültige Konfigurationsdatei! -manual_err=Fehler beim Speichern der Konfigurationsdatei +manual_err=Fehler beim Speichern der Konfigurationsdatei \ No newline at end of file diff --git a/squid/lang/de b/squid/lang/de index 80892a72d..203e48330 100644 --- a/squid/lang/de +++ b/squid/lang/de @@ -777,12 +777,10 @@ log_pools_delete=$1 Delay-Pools gelöscht log_delay_create=ACL für Delay-Pool $1 hinzugefügt log_delay_modify=ACL für Delay-Pool $1 geändert log_delay_delete=ACL für Delay-Pool $1 gelöscht - log_delay_move=ACL für Delay-Pool $1 verschoben log_refresh_create=Refresh-Regel für $1 erstellt log_refresh_modify=Refresh-Regel für $1 geändert log_refresh_delete=Refresh-Regel für $1 gelöscht - log_refresh_move=Refresh-Regel für $1 verschoben log_refreshes_delete=$1 Refresh-Regeln gelöscht log_iptables=Port-Weiterleitungs-Setup aktualisiert @@ -826,6 +824,7 @@ delay_ecannot=Sie dürfen Delay-Pools nicht bearbeiten delay_epercent='$1' ist kein gültiger Prozentsatz für das anfängliche Bucket-Niveau delay_return=Delay-Pools-Liste delay_delete=Ausgewählte Delay-Pools löschen + pool_title1=Delay-Pool hinzufügen pool_title2=Delay-Pool bearbeiten pool_header=Delay-Pool-Optionen @@ -946,7 +945,9 @@ refresh_emin=Fehlende oder ungültige Mindestzeit refresh_emax=Fehlende oder ungültige Maximale Zeit refresh_epc=Fehlender oder ungültiger Altersprozentsatz refresh_delete=Ausgewählte Refresh-Regeln löschen + drefresh_err=Fehler beim Löschen der Refresh-Regeln +drefresh_enone=Keine ausgewählt iptables_title=Port-Weiterleitungs-Setup iptables_inst0=Die für die Port-Weiterleitung erforderlichen IPtables-Firewall-Befehle scheinen auf Ihrem System nicht installiert zu sein. Weitere Informationen finden Sie im Linux Firewall-Modul. @@ -991,4 +992,4 @@ cachemsg_actions=Auf Aktionen anwenden cachemgr_all=Dieses Passwort für alle Aktionen verwenden cachemgr_others=Andere Aktionen: cachemgr_enone=Kein Passwort eingegeben - Sie sollten stattdessen Keine Passwörter erforderlich auswählen -cachemgr_err=Fehler beim Speichern der Cache-Manager-Passwörter +cachemgr_err=Fehler beim Speichern der Cache-Manager-Passwörter \ No newline at end of file diff --git a/squid/lang/de.auto b/squid/lang/de.auto deleted file mode 100644 index ba36a6559..000000000 --- a/squid/lang/de.auto +++ /dev/null @@ -1 +0,0 @@ -drefesh_enone=None selected diff --git a/squid/lang/zh b/squid/lang/zh index 1ca05bddf..642f1e8a7 100644 --- a/squid/lang/zh +++ b/squid/lang/zh @@ -194,6 +194,7 @@ eacl_program=处理程序 eacl_noext=未定义外部ACL程序。 eacl_addext=添加外部ACL程序。 eacl_eclass=未选择程序类 +eacl_cname类型名称 eacl_file=来自文件 $1 eacl_hdelete=删除所选限制 @@ -776,12 +777,10 @@ log_pools_delete=已删除延迟池 $1 log_delay_create=已添加延迟池 $1 的ACL log_delay_modify=已修改延迟池 $1 的ACL log_delay_delete=已删除延迟池 $1 的ACL - log_delay_move=已移动延迟池 $1的ACL log_refresh_create=为$1创建了刷新规则 log_refresh_modify=修改了 $1的刷新规则 log_refresh_delete=删除了 $1的刷新规则 - log_refresh_move=移动了 $1的刷新规则 log_refreshes_delete=删除了 $1 的刷新规则 log_iptables=更新的端口重定向设置 @@ -825,6 +824,7 @@ delay_ecannot=不允许编辑延迟池 delay_epercent='$1' 不是有效的初始存bucket储桶级别百分比 delay_return=延迟池列表 delay_delete=删除所选延迟池 + pool_title1=添加延迟池 pool_title2=编辑延迟池 pool_header=延迟池选项 @@ -945,6 +945,7 @@ refresh_emin=最小时间缺失或无效 refresh_emax=最长时间缺失或无效 refresh_epc=缺少或无效的Age百分比 refresh_delete=删除所选刷新规则 + drefresh_err=删除刷新规则失败 drefesh_enone=未选择 @@ -992,3 +993,5 @@ cachemgr_all=对所有操作使用此密码 cachemgr_others=其他操作: cachemgr_enone=未输入 - 您应该选择 No 不需要密码 cachemgr_err=保存缓存管理器密码失败 + +__norefs=1 diff --git a/squid/lang/zh.auto b/squid/lang/zh.auto deleted file mode 100644 index 93babd732..000000000 --- a/squid/lang/zh.auto +++ /dev/null @@ -1 +0,0 @@ -eacl_cname=Type name diff --git a/ssh2/lang/af.auto b/ssh2/lang/af.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/af.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/ar.auto b/ssh2/lang/ar.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/ar.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/be.auto b/ssh2/lang/be.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/be.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/bg.auto b/ssh2/lang/bg.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/bg.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/cs.auto b/ssh2/lang/cs.auto deleted file mode 100644 index 17f82084b..000000000 --- a/ssh2/lang/cs.auto +++ /dev/null @@ -1,2 +0,0 @@ -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/da.auto b/ssh2/lang/da.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/da.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/el.auto b/ssh2/lang/el.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/el.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/es.auto b/ssh2/lang/es.auto deleted file mode 100644 index 84ba72ce5..000000000 --- a/ssh2/lang/es.auto +++ /dev/null @@ -1 +0,0 @@ -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/eu.auto b/ssh2/lang/eu.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/eu.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/fa.auto b/ssh2/lang/fa.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/fa.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/fi.auto b/ssh2/lang/fi.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/fi.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/fr.auto b/ssh2/lang/fr.auto deleted file mode 100644 index 02dc3a3b0..000000000 --- a/ssh2/lang/fr.auto +++ /dev/null @@ -1,3 +0,0 @@ -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/he.auto b/ssh2/lang/he.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/he.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/hr.auto b/ssh2/lang/hr.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/hr.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/hu.auto b/ssh2/lang/hu.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/hu.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/it.auto b/ssh2/lang/it.auto deleted file mode 100644 index 02dc3a3b0..000000000 --- a/ssh2/lang/it.auto +++ /dev/null @@ -1,3 +0,0 @@ -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/ja.auto b/ssh2/lang/ja.auto deleted file mode 100644 index 17f82084b..000000000 --- a/ssh2/lang/ja.auto +++ /dev/null @@ -1,2 +0,0 @@ -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/ko.auto b/ssh2/lang/ko.auto deleted file mode 100644 index 17f82084b..000000000 --- a/ssh2/lang/ko.auto +++ /dev/null @@ -1,2 +0,0 @@ -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/lt.auto b/ssh2/lang/lt.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/lt.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/lv.auto b/ssh2/lang/lv.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/lv.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/mt.auto b/ssh2/lang/mt.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/mt.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/nl.auto b/ssh2/lang/nl.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/nl.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/no.auto b/ssh2/lang/no.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/no.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/pl.auto b/ssh2/lang/pl.auto deleted file mode 100644 index 17f82084b..000000000 --- a/ssh2/lang/pl.auto +++ /dev/null @@ -1,2 +0,0 @@ -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/pt.auto b/ssh2/lang/pt.auto deleted file mode 100644 index 02dc3a3b0..000000000 --- a/ssh2/lang/pt.auto +++ /dev/null @@ -1,3 +0,0 @@ -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/pt_BR.auto b/ssh2/lang/pt_BR.auto deleted file mode 100644 index 84ba72ce5..000000000 --- a/ssh2/lang/pt_BR.auto +++ /dev/null @@ -1 +0,0 @@ -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/ro.auto b/ssh2/lang/ro.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/ro.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/sl.auto b/ssh2/lang/sl.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/sl.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/sv.auto b/ssh2/lang/sv.auto deleted file mode 100644 index 17f82084b..000000000 --- a/ssh2/lang/sv.auto +++ /dev/null @@ -1,2 +0,0 @@ -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/th.auto b/ssh2/lang/th.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/th.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/uk.auto b/ssh2/lang/uk.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/uk.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/ur.auto b/ssh2/lang/ur.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/ur.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/vi.auto b/ssh2/lang/vi.auto deleted file mode 100644 index b80b347a0..000000000 --- a/ssh2/lang/vi.auto +++ /dev/null @@ -1,7 +0,0 @@ -index_title=SSH2 Login -index_warn=Warning! This telnet session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=MindTerm applet developed by AppGate. -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/zh.auto b/ssh2/lang/zh.auto deleted file mode 100644 index 17f82084b..000000000 --- a/ssh2/lang/zh.auto +++ /dev/null @@ -1,2 +0,0 @@ -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/ssh2/lang/zh_TW.auto b/ssh2/lang/zh_TW.auto deleted file mode 100644 index 02dc3a3b0..000000000 --- a/ssh2/lang/zh_TW.auto +++ /dev/null @@ -1,3 +0,0 @@ -index_esocket=There is no telnet server running on $1 port $2. -index_esocket2=There is no SSH server running on $1 port $2. -index_elookup=Failed to lookup IP address for $1 to test telnet or SSH server. diff --git a/sshd/lang/de b/sshd/lang/de index 80729d660..7a3287d19 100644 --- a/sshd/lang/de +++ b/sshd/lang/de @@ -242,4 +242,4 @@ manual_edata=Nichts eingegeben! manual_err=Fehler beim Speichern der Konfigurationsdatei dknown_err=Fehler beim Löschen der bekannten Hosts -dknown_enone=Keine ausgewählt +dknown_enone=Keine ausgewählt \ No newline at end of file diff --git a/status/lang/af.auto b/status/lang/af.auto index fe26f135a..5a4e8504b 100644 --- a/status/lang/af.auto +++ b/status/lang/af.auto @@ -5,7 +5,7 @@ index_desc=monitering index_up=status index_last=Laaste tjek index_local=plaaslike -index_madd=Add monitor of type +index_add=Voeg monitor van die tipe by: index_sched=Geskeduleerde monitering index_scheddesc=Skakel die geskeduleerde kontrole van monitors aan of uit, en stel die adres waarheen foute outomaties per e-pos gestuur word. index_return=dienslys @@ -74,17 +74,13 @@ type_alive=Lewende stelsel type_rssh=Afstand SSH type_slapd=LDAP-bediener type_ldap=LDAP-verbinding -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Skep Monitor mon_edit=Wysig Monitor mon_virtualmin=Waarskuwing! Hierdie monitor word geassosieer met die Virtualmin-domein $1 en moet dus nie hier gewysig of verwyder word nie. mon_header=Monitor besonderhede mon_header2=Opdragte om uit te voer -mon_header5=Notification options +mon_header3=Gemonitorde diensopsies mon_desc=beskrywing mon_remote=Hardloop op gasheer mon_remotes2=Hardloop op gashere en groepe @@ -151,7 +147,6 @@ sched_title=Geskeduleerde monitering sched_header=Opsies vir geskeduleerde agtergrondmonitering sched_mode=Geplande kontrole geaktiveer? sched_email=E-pos statusverslag aan -sched_email_def=System default ($1) sched_pager=Bladstatusverslag na nommer sched_none=Moenie e-pos stuur nie sched_pnone=Moenie bladsye stuur nie @@ -586,38 +581,3 @@ ldap_pass=LDAP-bedienerwagwoord info_desc=Stelselmonitor info_last=Huidige toestand info_title=Stelsel- en bedienerstatus - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/ar.auto b/status/lang/ar.auto index 5bc856b67..654e8c79e 100644 --- a/status/lang/ar.auto +++ b/status/lang/ar.auto @@ -5,7 +5,7 @@ index_desc=المراقبة index_up=الحالة index_last=اخر فحص index_local=محلي -index_madd=Add monitor of type +index_add=إضافة شاشة من النوع: index_sched=المراقبة المجدولة index_scheddesc=قم بتشغيل الفحص المجدول للشاشات أو إيقاف تشغيله ، وقم بتعيين العنوان الذي يتم إرسال رسائل الفشل إليه تلقائيًا عبر البريد الإلكتروني. index_return=قائمة الخدمات @@ -74,17 +74,13 @@ type_alive=نظام حي type_rssh=SSH البعيد type_slapd=خادم LDAP type_ldap=اتصال LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=إنشاء مراقب mon_edit=تحرير مراقب mon_virtualmin=تحذير! جهاز العرض هذا مقترن بمجال Virtualmin $1 ، لذا لا يجب تحريره أو حذفه هنا. mon_header=تفاصيل الشاشة mon_header2=أوامر للتشغيل -mon_header5=Notification options +mon_header3=خيارات الخدمة المراقبة mon_desc=وصف mon_remote=تشغيل على المضيف mon_remotes2=تشغيل على المضيفين والمجموعات @@ -151,7 +147,6 @@ sched_title=المراقبة المجدولة sched_header=خيارات مراقبة الخلفية المجدولة sched_mode=تمكين التحقق المجدول؟ sched_email=تقرير حالة البريد الإلكتروني إلى -sched_email_def=System default ($1) sched_pager=تقرير حالة الصفحة لرقم sched_none=لا ترسل بريد إلكتروني sched_pnone=لا ترسل صفحات @@ -586,38 +581,3 @@ ldap_pass=كلمة مرور خادم LDAP info_desc=مراقب النظام info_last=الحالة الحالية info_title=حالة النظام والخادم - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/be.auto b/status/lang/be.auto index f37664b6f..a1b34f283 100644 --- a/status/lang/be.auto +++ b/status/lang/be.auto @@ -5,7 +5,7 @@ index_desc=Маніторынг index_up=Статус index_last=Апошняя праверка index_local=Мясцовыя -index_madd=Add monitor of type +index_add=Дадаць манітор тыпу: index_sched=Планавы маніторынг index_scheddesc=Уключыце або выключайце планавую праверку манітораў і ўсталюйце адрас, на які адмовы аўтаматычна адпраўляюцца па электроннай пошце. index_return=Спіс паслуг @@ -74,17 +74,13 @@ type_alive=Жывая сістэма type_rssh=Аддалены SSH type_slapd=Сервер LDAP type_ldap=LDAP Падключэнне -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Стварыце манітор mon_edit=Рэдагаваць манітор mon_virtualmin=Увага! Гэты манітор звязаны з даменам Virtualmin $1, таму яго нельга рэдагаваць і выдаляць. mon_header=Манітор дэталяў mon_header2=Каманды для запуску -mon_header5=Notification options +mon_header3=Варыянты паслуг, якія кантралююцца mon_desc=Апісанне mon_remote=Запусціце на гаспадара mon_remotes2=Працуйце на хастах і групах @@ -151,7 +147,6 @@ sched_title=Планавы маніторынг sched_header=Запланаваныя варыянты маніторынгу фону sched_mode=Планавая праверка ўключана? sched_email=Справаздача аб стане па электроннай пошце -sched_email_def=System default ($1) sched_pager=Справаздача пра статус старонкі на нумар sched_none=Не адпраўляйце электронную пошту sched_pnone=Не адпраўляйце старонкі @@ -586,38 +581,3 @@ ldap_pass=Пароль сервера LDAP info_desc=Сістэмны манітор info_last=Бягучы статус info_title=Сістэма і статус сервера - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/bg.auto b/status/lang/bg.auto index edfd7b50d..f4b229f03 100644 --- a/status/lang/bg.auto +++ b/status/lang/bg.auto @@ -5,7 +5,7 @@ index_desc=мониторинг index_up=Статус index_last=Последна проверка index_local=местен -index_madd=Add monitor of type +index_add=Добавяне на монитор от тип: index_sched=Планиран мониторинг index_scheddesc=Включете или изключете планираната проверка на мониторите и задайте адреса, до който ще се изпращат автоматично грешки. index_return=списък на услуги @@ -74,17 +74,13 @@ type_alive=Жива система type_rssh=Отдалечен SSH type_slapd=LDAP сървър type_ldap=LDAP връзка -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Създайте монитор mon_edit=Редактиране на монитора mon_virtualmin=Внимание! Този монитор е свързан с домейна Virtualmin $1 и затова не трябва да се редактира или изтрива тук. mon_header=Детайли на монитора mon_header2=Команди за изпълнение -mon_header5=Notification options +mon_header3=Опции за мониторинг на услугите mon_desc=описание mon_remote=Изпълнете на хост mon_remotes2=Работете по хостове и групи @@ -151,7 +147,6 @@ sched_title=Планиран мониторинг sched_header=Планирани опции за наблюдение на фона sched_mode=Активирана проверка по график? sched_email=Доклад за състоянието на имейл до -sched_email_def=System default ($1) sched_pager=Доклад за състоянието на страницата до номер sched_none=Не изпращайте имейл sched_pnone=Не изпращайте страници @@ -586,38 +581,3 @@ ldap_pass=Парола за LDAP сървър info_desc=Системен монитор info_last=Актуално състояние info_title=Състояние на системата и сървъра - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/ca b/status/lang/ca index 24d8c46f7..e8daa81ff 100644 --- a/status/lang/ca +++ b/status/lang/ca @@ -5,6 +5,7 @@ index_desc=Monitorització index_up=Estat index_last=Darrera comprovació index_local=Local +index_add=Afegeix monitor del tipus: index_sched=Monitorització Planificada index_scheddesc=Activa o desactiva la comprovació planificada de monitors, i estableix l'adreça a la qual s'envien automàticament les fallades. index_return=a la llista de serveis @@ -77,6 +78,7 @@ mon_create=Crea Monitor mon_edit=Edita Monitor mon_header=Detalls del Monitor mon_header2=Ordres a executar +mon_header3=Opcions del servei monitoritzat mon_desc=Descripció mon_remote=Executa'l al host mon_remotes2=Executa'l als hosts i grups diff --git a/status/lang/ca.auto b/status/lang/ca.auto index 5dae872ad..e2dc64634 100644 --- a/status/lang/ca.auto +++ b/status/lang/ca.auto @@ -1,16 +1,8 @@ -index_madd=Add monitor of type - type_init=Acció d'arrencada -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=Atenció! Aquest monitor està associat amb el domini Virtualmin $1 i, per tant, no s'hauria d'editar ni suprimir aquí. -mon_header5=Notification options mon_notifywebhook=Webhook -sched_email_def=System default ($1) sched_warn3=Sempre que el servei estigui activat sched_webhook=Envia l'estat al webhook sched_webhookno=No envieu @@ -32,38 +24,3 @@ monitor_sub_isup=$1 més a $2 monitor_pager_isup=$1 : "$2" ha pujat $3 monitor_snmp_isup=$1:$2 monitor_email_isup=El monitor de $1 de "$2" ha detectat que el servei ha augmentat a $3 - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/cs b/status/lang/cs index 773ce21c7..c41451cf9 100644 --- a/status/lang/cs +++ b/status/lang/cs @@ -5,6 +5,7 @@ index_desc=Monitorování index_up=Stav index_last=Poslední kontrola index_local=Lokální +index_add=Přidat monitor typu: index_sched=Plánování monitorování index_scheddesc=Zapnout nebo vypnout naplánovanou kontrolu monitoringu a nastavit adresu, kam mají být případná selhání zaslána mailem. index_return=seznam služeb @@ -68,6 +69,7 @@ mon_create=Vytvořit monitorování mon_edit=Editovat monitorování mon_header=Detaily monitorování mon_header2=Příkazy ke spuštění +mon_header3=Volby pro monitorovanou službu mon_desc=Popis mon_remote=Běžet na hostu mon_local=Lokální diff --git a/status/lang/cs.auto b/status/lang/cs.auto index 5893cdb1b..e450d404d 100644 --- a/status/lang/cs.auto +++ b/status/lang/cs.auto @@ -1,4 +1,3 @@ -index_madd=Add monitor of type index_refsel=Obnovit vybrané index_tmpls=Upravit e-mailové šablony index_tmplsdesc=Zobrazení a úpravy šablon používaných k vytváření e-mailových zpráv odeslaných, když sledované služby klesnou. @@ -10,13 +9,8 @@ type_dovecot=Server Dovecot IMAP/POP3 type_init=Bootup Action type_slapd=LDAP Server type_ldap=Připojení LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=Varování! Tento monitor je přidružen k doméně Virtualmin $1, a proto by zde neměl být upravován ani mazán. -mon_header5=Notification options mon_remotes2=Běží na hostitelích a skupinách mon_ontimeout=Pokud monitor vyprší, spusťte příkaz mon_eremote2=Webmin server $1 nelze kontaktovat : $2 @@ -34,7 +28,6 @@ mon_changes1=Zobrazit pouze změny mon_all=Zobrazit všechny historické události mon_nochanges=V posledních historických událostech $1 nedošlo k žádným změnám stavu. -sched_email_def=System default ($1) sched_warn3=Dokud je služba v provozu sched_esmsname=Chybějící nebo neplatně vypadající číslo SMS sched_subject=Řádek předmětu pro zprávy SMS @@ -195,38 +188,3 @@ ldap_pass=Heslo serveru LDAP info_desc=Sledování systému info_last=Aktuální stav info_title=Stav systému a serveru - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/da.auto b/status/lang/da.auto index 41fe49b49..29c7d18b1 100644 --- a/status/lang/da.auto +++ b/status/lang/da.auto @@ -5,7 +5,7 @@ index_desc=Overvågning index_up=status index_last=Sidste kontrol index_local=Lokal -index_madd=Add monitor of type +index_add=Tilføj skærm af typen: index_sched=Planlagt overvågning index_scheddesc=Tænd eller sluk for planlagt kontrol af skærme, og indstil den adresse, som fejl automatisk sendes til. index_return=serviceliste @@ -74,17 +74,13 @@ type_alive=Alive System type_rssh=Fjern SSH type_slapd=LDAP-server type_ldap=LDAP-forbindelse -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Opret skærm mon_edit=Rediger skærm mon_virtualmin=Advarsel! Denne skærm er knyttet til Virtualmin-domænet $1 og bør derfor ikke redigeres eller slettes her. mon_header=Overvåg detaljer mon_header2=Kommandoer, der skal køres -mon_header5=Notification options +mon_header3=Overvågede servicemuligheder mon_desc=Beskrivelse mon_remote=Kør på vært mon_remotes2=Kør på værter og grupper @@ -151,7 +147,6 @@ sched_title=Planlagt overvågning sched_header=Planlagte baggrundsovervågningsmuligheder sched_mode=Planlagt kontrol aktiveret? sched_email=E-mail statusrapport til -sched_email_def=System default ($1) sched_pager=Sidestatusrapport til nummer sched_none=Send ikke e-mail sched_pnone=Send ikke sider @@ -586,38 +581,3 @@ ldap_pass=LDAP-serveradgangskode info_desc=System monitor info_last=Nuværende status info_title=System- og serverstatus - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/de b/status/lang/de index 5a89751c0..0ca22001e 100644 --- a/status/lang/de +++ b/status/lang/de @@ -620,4 +620,4 @@ imap_ehost=Fehlender oder nicht auflösbarer IMAP-Server-Host imap_eport=Fehlender oder nicht numerischer IMAP-Server-Port imap_euser=Fehlende IMAP-Anmeldung -reboot_pkgs=Package-Updates erfordern einen Neustart +reboot_pkgs=Package-Updates erfordern einen Neustart \ No newline at end of file diff --git a/status/lang/el.auto b/status/lang/el.auto index 89783e706..0c3cd9546 100644 --- a/status/lang/el.auto +++ b/status/lang/el.auto @@ -5,7 +5,7 @@ index_desc=Παρακολούθηση index_up=Κατάσταση index_last=Τελευταίος έλεγχος index_local=Τοπικός -index_madd=Add monitor of type +index_add=Προσθήκη οθόνης τύπου: index_sched=Προγραμματισμένη παρακολούθηση index_scheddesc=Ενεργοποιήστε ή απενεργοποιήστε τον προγραμματισμένο έλεγχο των οθονών και ρυθμίστε τη διεύθυνση στην οποία αποστέλλονται αυτόματα αποτυχίες. index_return=λίστα υπηρεσιών @@ -74,17 +74,13 @@ type_alive=Σύστημα Alive type_rssh=Απομακρυσμένη SSH type_slapd=LDAP Server type_ldap=Σύνδεση LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Δημιουργία οθόνης mon_edit=Επεξεργασία παρακολούθησης mon_virtualmin=Προειδοποίηση! Αυτή η οθόνη σχετίζεται με τον τομέα Virtualmin $1 και επομένως δεν πρέπει να επεξεργαστείτε ή να διαγράψετε εδώ. mon_header=Παρακολουθήστε τα στοιχεία mon_header2=Εντολές για εκτέλεση -mon_header5=Notification options +mon_header3=Παρακολούθηση επιλογών υπηρεσίας mon_desc=Περιγραφή mon_remote=Εκτέλεση στο host mon_remotes2=Εκτέλεση σε κεντρικούς υπολογιστές και ομάδες @@ -151,7 +147,6 @@ sched_title=Προγραμματισμένη παρακολούθηση sched_header=Προγραμματισμένες επιλογές παρακολούθησης φόντου sched_mode=Ο προγραμματισμένος έλεγχος είναι ενεργοποιημένος; sched_email=Αναφορά κατάστασης ηλεκτρονικού ταχυδρομείου στη διεύθυνση -sched_email_def=System default ($1) sched_pager=Αναφορά κατάστασης σελίδας σε αριθμό sched_none=Μην στείλετε email sched_pnone=Μην στέλνετε σελίδες @@ -586,38 +581,3 @@ ldap_pass=Κωδικός πρόσβασης διακομιστή LDAP info_desc=Παρακολούθηση συστήματος info_last=Τρέχουσα κατάσταση info_title=Κατάσταση συστήματος και διακομιστή - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/es b/status/lang/es index 219804067..4eedb33f4 100644 --- a/status/lang/es +++ b/status/lang/es @@ -5,6 +5,7 @@ index_desc=Monitorizando index_up=Estado index_last=Último chequeo index_local=Local +index_add=Añadir monitor de tipo: index_sched=Monitorización Planificada index_scheddesc=Activar o desactivar el chequeo planificado de los monitores, e introducir la dirección a la cual se enviarán automáticamente los fallos por email. index_return=lista de servicios diff --git a/status/lang/es.auto b/status/lang/es.auto index b6188a995..60401fabe 100644 --- a/status/lang/es.auto +++ b/status/lang/es.auto @@ -1,4 +1,3 @@ -index_madd=Add monitor of type index_refsel=Actualizar seleccionado index_group=Miembros de $1 index_tmpls=Editar plantillas de correo electrónico @@ -16,14 +15,10 @@ type_alive=Sistema vivo type_rssh=SSH remoto type_slapd=Servidor LDAP type_ldap=Conexión LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=¡Advertencia! Este monitor está asociado con el dominio de Virtualmin $1, por lo que no debe editarse ni eliminarse aquí. mon_header2=Comandos para ejecutar -mon_header5=Notification options +mon_header3=Opciones de servicio monitoreadas mon_remotes2=Ejecutar en hosts y grupos mon_ontimeout=Si el monitor agota el tiempo de espera, ejecute el comando mon_eremote2=No se pudo contactar al servidor Webmin $1 : $2 @@ -46,7 +41,6 @@ mon_changes1=Mostrar solo cambios mon_all=Mostrar todos los eventos históricos mon_nochanges=No se produjeron cambios de estado en los últimos $1 eventos históricos. -sched_email_def=System default ($1) sched_pnone=No envíes paginas sched_warn3=Mientras el servicio esté activo sched_eemailserver=Su servidor de correo no está instalado : $1 @@ -271,38 +265,3 @@ ldap_pass=Contraseña del servidor LDAP info_desc=Monitor del sistema info_last=Estado actual info_title=Sistema y estado del servidor - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/eu.auto b/status/lang/eu.auto index 8d5e25a9f..cb50d40c7 100644 --- a/status/lang/eu.auto +++ b/status/lang/eu.auto @@ -5,7 +5,7 @@ index_desc=Jarraipen index_up=Egoera index_last=Azken egiaztapena index_local=Tokiko -index_madd=Add monitor of type +index_add=Gehitu motako monitorea: index_sched=Programatutako jarraipena index_scheddesc=Aktibatu edo desaktibatu monitoreen egiaztapena eta zehaztu hutsegiteak automatikoki bidaliko zaizkion helbideak. index_return=zerbitzuen zerrenda @@ -74,17 +74,13 @@ type_alive=Sistema Alive type_rssh=Urruneko SSH type_slapd=LDAP zerbitzaria type_ldap=LDAP konexioa -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Sortu Monitorea mon_edit=Editatu monitorea mon_virtualmin=Kontuz! Monitore hau $1 Virtualmin domeinuarekin lotuta dago eta, beraz, ez da hemen editatu edo ezabatu behar. mon_header=Begiralearen xehetasunak mon_header2=Exekutatzeko aginduak -mon_header5=Notification options +mon_header3=Begiratutako zerbitzuen aukerak mon_desc=deskribapena mon_remote=Exekutatu ostalarian mon_remotes2=Exekutatu ostalari eta taldeetan @@ -151,7 +147,6 @@ sched_title=Programatutako jarraipena sched_header=Aurreikusitako fondoen jarraipena egiteko aukerak sched_mode=Programatutako egiaztapena gaituta dago? sched_email=Posta elektronikoko egoeraren txostena -sched_email_def=System default ($1) sched_pager=Orriaren egoeraren memoria zenbakira sched_none=Ez bidali mezu elektronikorik sched_pnone=Ez bidali orririk @@ -586,38 +581,3 @@ ldap_pass=LDAP zerbitzariaren pasahitza info_desc=Sistemaren monitorea info_last=Egungo egoera info_title=Sistema eta zerbitzariaren egoera - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/fa b/status/lang/fa index da87c3760..89e5b5753 100644 --- a/status/lang/fa +++ b/status/lang/fa @@ -4,6 +4,7 @@ index_desc=پايشگري index_up=وضعيت index_last=آخرين بررسي index_local=محلي +index_add=افزودن پايشگر از نوع: index_sched=پايشگري زمانبندي شده index_scheddesc=براي روشن يا خاموش کردن پايشگريهاي زمانبندي شده و همچنين تنظيم نشانيهايي که عدم موفقيتها براي آنها پست الکترونيکي شوند استفاده مي‌شود. index_return=فهرست خدمتها diff --git a/status/lang/fa.auto b/status/lang/fa.auto index 15df9ad48..f65495315 100644 --- a/status/lang/fa.auto +++ b/status/lang/fa.auto @@ -1,5 +1,4 @@ index_title=وضعیت سیستم و سرور -index_madd=Add monitor of type index_delete=انتخاب شده را پاک کن index_refsel=تازه کردن انتخاب شده است index_group=اعضای$1 @@ -20,14 +19,10 @@ type_alive=سیستم زنده type_rssh=SSH از راه دور type_slapd=سرور LDAP type_ldap=اتصال LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=هشدار این نمایشگر با دامنه Virtualmin $1 مرتبط است و بنابراین نباید در اینجا ویرایش یا حذف شود. mon_header2=دستورات اجرا -mon_header5=Notification options +mon_header3=گزینه های خدمات نظارت شده mon_remotes2=روی میزبان ها و گروه ها اجرا کنید mon_ontimeout=اگر مرتباً مانیتور شوید ، دستور را اجرا کنید mon_eremote2=با سرور وبمین$1 قابل تماس نیست :$2 @@ -59,7 +54,6 @@ mon_changes1=فقط تغییرات را نمایش دهید mon_all=نمایش تمام وقایع تاریخی mon_nochanges=هیچ تغییری در وضعیت گذشته در$1 رویدادهای تاریخی رخ نداد. -sched_email_def=System default ($1) sched_pnone=صفحه ارسال نکنید sched_warn3=تا زمانی که سرویس تمام شود sched_eemailserver=سرور نامه شما نصب نشده است :$1 @@ -326,38 +320,3 @@ ldap_pass=رمز عبور سرور LDAP info_desc=مانیتور سیستم info_last=وضعیت فعلی info_title=وضعیت سیستم و سرور - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/fi.auto b/status/lang/fi.auto index eb973e507..050581504 100644 --- a/status/lang/fi.auto +++ b/status/lang/fi.auto @@ -5,7 +5,7 @@ index_desc=seuranta index_up=Tila index_last=Viimeinen tarkistus index_local=paikallinen -index_madd=Add monitor of type +index_add=Lisää monitorityyppi: index_sched=Ajoitettu seuranta index_scheddesc=Kytke monitorien ajoitettu tarkistus päälle tai pois päältä ja aseta osoite, johon viat lähetetään automaattisesti. index_return=palveluluettelo @@ -74,17 +74,13 @@ type_alive=Elävä järjestelmä type_rssh=Etä SSH type_slapd=LDAP-palvelin type_ldap=LDAP-yhteys -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Luo näyttö mon_edit=Muokkaa näyttöä mon_virtualmin=Varoitus! Tämä näyttö on liitetty Virtualmin-verkkotunnukseen $1, joten sitä ei pitäisi muokata tai poistaa täällä. mon_header=Monitorin yksityiskohdat mon_header2=Komennot ajaa -mon_header5=Notification options +mon_header3=Valvotut palveluvaihtoehdot mon_desc=Kuvaus mon_remote=Suorita isäntällä mon_remotes2=Suorita isännät ja ryhmät @@ -151,7 +147,6 @@ sched_title=Ajoitettu seuranta sched_header=Ajoitetut taustavalvontavaihtoehdot sched_mode=Ajoitettu tarkistus käytössä? sched_email=Lähetä tilaraportti sähköpostitse -sched_email_def=System default ($1) sched_pager=Sivun tilaraportti numeroon sched_none=Älä lähetä sähköpostia sched_pnone=Älä lähetä sivuja @@ -586,38 +581,3 @@ ldap_pass=LDAP-palvelimen salasana info_desc=Järjestelmämonitori info_last=Nykyinen tila info_title=Järjestelmän ja palvelimen tila - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/fr b/status/lang/fr index 063fdfce3..49ceb1608 100644 --- a/status/lang/fr +++ b/status/lang/fr @@ -5,6 +5,7 @@ index_desc=Surveillance index_up=État index_last=Dernière vérification index_local=Local +index_add=Ajouter un moniteur de type index_sched=Surveillance programmée index_scheddesc=(Dés)activez le contrôle des moniteurs et définissez l'adresse à laquelle les échecs font automatiquement l'objet d'un message électronique. index_return=à la liste des services @@ -79,6 +80,7 @@ mon_edit=Modification d'un moniteur mon_virtualmin=Attention! Ce moniteur est associé au domaine Virtualmin $1 et ne doit donc pas être modifié ou supprimé ici. mon_header=Détails du moniteur mon_header2=Commandes à exécuter +mon_header3=Options de service surveillées mon_desc=Description mon_remote=S'exécute sur l'hôte mon_remotes2=Exécuter sur des hôtes et des groupes diff --git a/status/lang/fr.auto b/status/lang/fr.auto index 9fc49b0c6..7f703af11 100644 --- a/status/lang/fr.auto +++ b/status/lang/fr.auto @@ -1,14 +1,5 @@ -index_madd=Add monitor of type - -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required - -mon_header5=Notification options mon_notifywebhook=Webhook -sched_email_def=System default ($1) sched_webhook=Envoyer le statut au webhook sched_webhookno=N'envoyez pas sched_webhookyes=URL HTTP ou HTTPS @@ -26,38 +17,3 @@ monitor_sub_isup=$1 sur $2 monitor_pager_isup=$1 : "$2" est en hausse $3 monitor_snmp_isup=$1:$2 monitor_email_isup=Le moniteur sur $1 pour «$2» a détecté que le service est actif à $3 - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/he.auto b/status/lang/he.auto index 1de9f0c6d..5a20fa703 100644 --- a/status/lang/he.auto +++ b/status/lang/he.auto @@ -5,7 +5,7 @@ index_desc=מעקב index_up=סטטוס index_last=בדיקה אחרונה index_local=מקומי -index_madd=Add monitor of type +index_add=הוסף צג מהסוג: index_sched=ניטור מתוזמן index_scheddesc=הפעל או כבה את הבדיקה המתוכננת של צגים והגדר את הכתובת אליה נשלחים אוטומטית תקלות. index_return=רשימת שירות @@ -74,17 +74,13 @@ type_alive=מערכת חי type_rssh=SSH מרוחק type_slapd=שרת LDAP type_ldap=חיבור LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=צור צג mon_edit=ערוך את הצג mon_virtualmin=אַזהָרָה! צג זה משויך לתחום Virtualmin $1, ולכן אין לערוך אותו או למחוק אותו כאן. mon_header=מעקב אחר פרטים mon_header2=פקודות להפעלה -mon_header5=Notification options +mon_header3=אפשרויות שירות מנוטרות mon_desc=תיאור mon_remote=הפעל על מארח mon_remotes2=רוץ על מארחים וקבוצות @@ -151,7 +147,6 @@ sched_title=ניטור מתוזמן sched_header=אפשרויות ניטור רקע מתוזמנות sched_mode=בדיקה מתוזמנת מופעלת? sched_email=דווח על מצב דוא"ל לדוא"ל -sched_email_def=System default ($1) sched_pager=דוח מצב עמוד למספר sched_none=אל תשלח דוא"ל sched_pnone=אל תשלח דפים @@ -586,38 +581,3 @@ ldap_pass=סיסמת שרת LDAP info_desc=צג מערכת info_last=מצב נוכחי info_title=מצב מערכת ושרת - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/hr.auto b/status/lang/hr.auto index e96cddc90..bd5ec9728 100644 --- a/status/lang/hr.auto +++ b/status/lang/hr.auto @@ -5,7 +5,7 @@ index_desc=Praćenje index_up=Status index_last=Zadnja provjera index_local=lokalne -index_madd=Add monitor of type +index_add=Dodajte monitor tipa: index_sched=Planirani nadzor index_scheddesc=Uključite ili isključite zakazane provjere monitora i postavite adresu na koju se kvarovi automatski šalju. index_return=popis usluga @@ -74,17 +74,13 @@ type_alive=Živ sustav type_rssh=Udaljeni SSH type_slapd=LDAP poslužitelj type_ldap=LDAP veza -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Stvorite monitor mon_edit=Uredi monitor mon_virtualmin=Upozorenje! Ovaj je monitor povezan s domenom Virtualmin $1 i zato ga ovdje ne treba uređivati ili brisati. mon_header=Pojedinosti o monitoru mon_header2=Naredbe za pokretanje -mon_header5=Notification options +mon_header3=Mogućnosti nadgledanja usluga mon_desc=Opis mon_remote=Pokreni na domaćinu mon_remotes2=Trčanje na domaćinima i grupama @@ -151,7 +147,6 @@ sched_title=Planirani nadzor sched_header=Planirane mogućnosti praćenja pozadine sched_mode=Je li planirano provjera omogućeno? sched_email=Izvješće o statusu e-poštom na -sched_email_def=System default ($1) sched_pager=Izvješće o statusu stranice na broj sched_none=Ne šaljite e-poštu sched_pnone=Ne šaljite stranice @@ -586,38 +581,3 @@ ldap_pass=Lozinka LDAP poslužitelja info_desc=Monitor sustava info_last=Trenutni status info_title=Sustav i status poslužitelja - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/hu b/status/lang/hu index dee1b323c..191bbcfcd 100644 --- a/status/lang/hu +++ b/status/lang/hu @@ -5,6 +5,7 @@ index_desc=Monitoring index_up=Status index_last=Last check index_local=Local +index_add=Add monitor of type: index_sched=Scheduled Monitoring index_scheddesc=Turn scheduled checking of monitors on or off, and set the address to which failures are automatically emailed. index_return=service list @@ -74,6 +75,7 @@ mon_create=Create Monitor mon_edit=Edit Monitor mon_header=Monitor details mon_header2=Commands to run +mon_header3=Monitored service options mon_desc=Description mon_remote=Run on host mon_remotes2=Run on hosts and groups diff --git a/status/lang/hu.auto b/status/lang/hu.auto index fffbc8791..b5aa8dd78 100644 --- a/status/lang/hu.auto +++ b/status/lang/hu.auto @@ -1,16 +1,9 @@ -index_madd=Add monitor of type - type_fail2ban=Fail2Ban Server type_init=Indítóművelet type_slapd=LDAP szerver type_ldap=LDAP kapcsolat -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=Figyelem! Ez a monitor a $1 Virtualmin tartományhoz van társítva, ezért nem szabad itt szerkeszteni vagy törölni. -mon_header5=Notification options mon_etype=Érvénytelen monitor típusnév mon_notifywebhook=Webhook mon_header4=Állapot előzményei @@ -23,7 +16,6 @@ mon_changes1=Csak a változások megjelenítése mon_all=Az összes történelmi esemény megjelenítése mon_nochanges=Az utóbbi $1 történelmi eseményekben nem történt állapotváltozás. -sched_email_def=System default ($1) sched_warn3=Amíg a szolgáltatás fennáll sched_subject=Tárgy sor az SMS-ekhez sched_subject0=Nincs (riasztás van a testben) @@ -82,38 +74,3 @@ ldap_pass=LDAP szerver jelszava info_desc=Rendszermonitor info_last=Jelenlegi állapot info_title=Rendszer és szerver állapota - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/it b/status/lang/it index b153fc351..4963937d1 100644 --- a/status/lang/it +++ b/status/lang/it @@ -62,6 +62,7 @@ type_slapd=Server LDAP type_ldap=Connessione LDAP mon_virtualmin=Avvertimento! Questo monitor è associato al dominio Virtualmin $1, quindi non deve essere modificato o eliminato qui. +mon_header3=Opzioni di servizio monitorate mon_remotes2=Esegui su host e gruppi mon_none=Nessun server remoto definito mon_nosched=Controlla nei tempi previsti? diff --git a/status/lang/it.auto b/status/lang/it.auto index eec68a9fc..de17345d1 100644 --- a/status/lang/it.auto +++ b/status/lang/it.auto @@ -5,7 +5,7 @@ index_desc=Monitoraggio index_up=Stato index_last=Ultimo controllo index_local=Locale -index_madd=Add monitor of type +index_add=Aggiungi monitor di tipo: index_sched=Monitoraggio programmato index_return=lista dei servizi index_none=Nessun monitor è attualmente definito. @@ -13,16 +13,10 @@ index_refresh=Aggiorna stato index_delete=Elimina selezionato index_group=Membri di $1 -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required - mon_create=Crea Monitoraggio mon_edit=Modifica Monitor mon_header=Monitorare i dettagli mon_header2=Comandi da eseguire -mon_header5=Notification options mon_desc=Descrizione mon_remote=Esegui su host mon_local=Locale @@ -49,7 +43,6 @@ mon_empty=Nessun membro mon_onemem=Un membro mon_members=$1 membri -sched_email_def=System default ($1) sched_webhook=Invia lo stato al webhook sched_webhookno=Non inviare sched_webhookyes=URL HTTP o HTTPS @@ -149,38 +142,3 @@ consume_rate=Tasso di consumo massimo (al secondo) consume_high=Il tasso di consumo è $1/secondo alive_up=Su per $1 - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/ja b/status/lang/ja index 8cb3b3ee8..55ee0e59e 100644 --- a/status/lang/ja +++ b/status/lang/ja @@ -5,6 +5,7 @@ index_desc=モニタ中 index_up=ステータス index_last=最終チェック index_local=ローカル +index_add=モニタの種類を追加: index_sched=スケジュールされたモニタ index_scheddesc=スケジュールされたモニタのチェックをオン/オフします。失敗したときに自動的にメールされるアドレスを設定してください。 index_return=サービス リスト @@ -70,6 +71,7 @@ mon_create=モニタを作成 mon_edit=モニタを編集 mon_header=モニタの詳細 mon_header2=実行するコマンド +mon_header3=Monitored サービス options mon_desc=説明 mon_remote=ホストで実行 mon_remotes2=Run on hosts and groups diff --git a/status/lang/ja.auto b/status/lang/ja.auto index 5b90fdb62..ce150caa0 100644 --- a/status/lang/ja.auto +++ b/status/lang/ja.auto @@ -1,4 +1,3 @@ -index_madd=Add monitor of type index_refsel=選択を更新 type_sslcert=SSL証明書 @@ -8,13 +7,8 @@ type_dovecot=Dovecot IMAP/POP3サーバー type_init=起動アクション type_slapd=LDAPサーバー type_ldap=LDAP接続 -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=警告！このモニターはVirtualminドメイン $1に関連付けられているため、ここで編集または削除しないでください。 -mon_header5=Notification options mon_ontimeout=モニターがタイムアウトした場合、コマンドを実行します mon_eremote2=Webminサーバー $1に接続できませんでした： $2 mon_etype=無効なモニタータイプ名 @@ -29,7 +23,6 @@ mon_changes1=変更のみを表示 mon_all=すべての履歴イベントを表示 mon_nochanges=最後の $1履歴イベントでステータスの変更は発生しませんでした。 -sched_email_def=System default ($1) sched_warn3=サービスが稼働している限り sched_esmsname=SMS番号が見つからないか無効です sched_subject=SMSメッセージの件名行 @@ -148,38 +141,3 @@ ldap_pass=LDAPサーバーのパスワード info_desc=システムモニター info_last=現在の状態 info_title=システムとサーバーのステータス - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/ko b/status/lang/ko index 9f1319a98..2b3de923c 100644 --- a/status/lang/ko +++ b/status/lang/ko @@ -5,6 +5,7 @@ index_desc=모니터링 index_up=상태 index_last=최종 검사 index_local=로컬 +index_add=추가할 모니터 유형: index_sched=예약된 모니터 index_scheddesc=예약된 모니터 검사의 on/off를 전환하고, 지정된 주소로 실패를 이메일로 자동 전송 합니다. index_return=서비스 목록 @@ -70,6 +71,7 @@ mon_create=모니터 작성 mon_edit=모니터 편집 mon_header=모니터 세부 정보 mon_header2=실행할 명령 +mon_header3=서비스 모니터 옵션 mon_desc=설명 mon_remote=호스트에서 실행 mon_remotes2=호스트와 그룹에서 실행 diff --git a/status/lang/ko.auto b/status/lang/ko.auto index 37585f3f1..37d8d79ca 100644 --- a/status/lang/ko.auto +++ b/status/lang/ko.auto @@ -1,4 +1,3 @@ -index_madd=Add monitor of type index_refsel=선택한 새로 고침 type_sslcert=SSL 인증서 @@ -8,13 +7,8 @@ type_dovecot=도브 코트 IMAP/POP3 서버 type_init=부팅 동작 type_slapd=LDAP 서버 type_ldap=LDAP 연결 -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=경고! 이 모니터는 Virtualmin 도메인 $1 에 연결되어 있으므로 여기에서 편집하거나 삭제하면 안됩니다. -mon_header5=Notification options mon_ontimeout=모니터 시간이 초과되면 명령을 실행하십시오. mon_eremote2=Webmin 서버 $1 에 접속할 수 없습니다 : $2 mon_etype=잘못된 모니터 유형 이름 @@ -30,7 +24,6 @@ mon_changes1=변경 사항 만 표시 mon_all=모든 역사적 사건 표시 mon_nochanges=마지막 $1 기록 이벤트에서 상태 변경이 발생하지 않았습니다. -sched_email_def=System default ($1) sched_warn3=서비스가 작동하는 한 sched_esmsname=누락되거나 잘못된 SMS 번호 sched_subject=SMS 메시지 제목 @@ -150,38 +143,3 @@ ldap_pass=LDAP 서버 비밀번호 info_desc=시스템 모니터 info_last=현재 상태 info_title=시스템 및 서버 상태 - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/lt.auto b/status/lang/lt.auto index fb5688b4d..c15dc9195 100644 --- a/status/lang/lt.auto +++ b/status/lang/lt.auto @@ -5,7 +5,7 @@ index_desc=Stebėjimas index_up=Statusas index_last=Paskutinis patikrinimas index_local=Vietinis -index_madd=Add monitor of type +index_add=Pridėti tipo monitorių: index_sched=Suplanuotas stebėjimas index_scheddesc=Įjunkite arba išjunkite planuotą monitorių tikrinimą ir nustatykite adresą, į kurį gedimai bus siunčiami automatiškai. index_return=paslaugų sąrašas @@ -74,17 +74,13 @@ type_alive=Gyva sistema type_rssh=Nuotolinis SSH type_slapd=LDAP serveris type_ldap=LDAP ryšys -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Sukurti monitorių mon_edit=Redaguoti monitorių mon_virtualmin=Įspėjimas! Šis monitorius yra susietas su „Virtualmin“ domenu $1, todėl jo nereikia čia redaguoti ar ištrinti. mon_header=Monitoriaus informacija mon_header2=Komandos bėgti -mon_header5=Notification options +mon_header3=Stebimos paslaugų galimybės mon_desc=apibūdinimas mon_remote=Paleisk šeimininkui mon_remotes2=Bėgiokite pas šeimininkus ir grupes @@ -151,7 +147,6 @@ sched_title=Suplanuotas stebėjimas sched_header=Suplanuotos foninės stebėjimo parinktys sched_mode=Suplanuotas tikrinimas įjungtas? sched_email=El. Pašto būklės ataskaita -sched_email_def=System default ($1) sched_pager=Puslapio būsenos ataskaita numeriu sched_none=Nesiųskite el. Laiško sched_pnone=Nesiųskite puslapių @@ -586,38 +581,3 @@ ldap_pass=LDAP serverio slaptažodis info_desc=Sistemos monitorius info_last=Dabartinis statusas info_title=Sistemos ir serverio būsena - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/lv.auto b/status/lang/lv.auto index 084c950cb..10e76e099 100644 --- a/status/lang/lv.auto +++ b/status/lang/lv.auto @@ -5,7 +5,7 @@ index_desc=Uzraudzība index_up=Statuss index_last=Pēdējā pārbaude index_local=Vietējie -index_madd=Add monitor of type +index_add=Pievienot monitora tipu: index_sched=Plānotais monitorings index_scheddesc=Ieslēdziet vai izslēdziet plānoto monitoru pārbaudi un iestatiet adresi, uz kuru automātiski tiek sūtītas kļūmes. index_return=pakalpojumu saraksts @@ -74,17 +74,13 @@ type_alive=Dzīvā sistēma type_rssh=Attālā SSH type_slapd=LDAP serveris type_ldap=LDAP savienojums -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Izveidot monitoru mon_edit=Rediģēt monitoru mon_virtualmin=Brīdinājums! Šis monitors ir saistīts ar Virtualmin domēnu $1, tāpēc to šeit nevajadzētu rediģēt vai dzēst. mon_header=Monitoru informācija mon_header2=Komandas palaist -mon_header5=Notification options +mon_header3=Uzraudzītas pakalpojumu iespējas mon_desc=Apraksts mon_remote=Palaist uz saimnieka mon_remotes2=Skrien saimniekiem un grupām @@ -151,7 +147,6 @@ sched_title=Plānotais monitorings sched_header=Plānotas fona uzraudzības iespējas sched_mode=Plānotā pārbaude ir iespējota? sched_email=Nosūtīt statusa ziņojumu uz -sched_email_def=System default ($1) sched_pager=Lapas statusa atskaite uz numuru sched_none=Nesūtiet e-pastu sched_pnone=Nesūtiet lapas @@ -586,38 +581,3 @@ ldap_pass=LDAP servera parole info_desc=Sistēmas monitors info_last=Pašreizējais statuss info_title=Sistēmas un servera statuss - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/ms.auto b/status/lang/ms.auto index 3cdaf4d4b..8b7ea4614 100644 --- a/status/lang/ms.auto +++ b/status/lang/ms.auto @@ -5,7 +5,7 @@ index_desc=Pemantauan index_up=Status index_last=Pemeriksaan terakhir index_local=Tempatan -index_madd=Add monitor of type +index_add=Tambah monitor jenis: index_sched=Pemantauan Berjadual index_scheddesc=Hidupkan atau matikan pemeriksaan berjadual yang dijadualkan, dan tetapkan alamat yang kegagalannya diemail secara automatik. index_return=senarai perkhidmatan @@ -46,17 +46,13 @@ type_dns=Lookup DNS type_alive=Hidupkan Sistem type_slapd=Pelayan LDAP type_ldap=Sambungan LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Buat Monitor mon_edit=Edit Monitor mon_virtualmin=Amaran! Monitor ini dikaitkan dengan domain Virtualmin $1, jadi tidak boleh diedit atau dihapuskan di sini. mon_header=Perincian monitor mon_header2=Perintah untuk dijalankan -mon_header5=Notification options +mon_header3=Pilihan perkhidmatan yang dipantau mon_desc=Penerangan mon_remote=Jalankan di hos mon_remotes2=Jalankan tuan rumah dan kumpulan @@ -123,7 +119,6 @@ sched_title=Pemantauan Berjadual sched_header=Pilihan pemantauan latar belakang yang dijadwalkan sched_mode=Pemeriksaan berjadual diaktifkan? sched_email=Laporan status e-mel kepada -sched_email_def=System default ($1) sched_pager=Laporan status halaman ke nombor sched_none=Jangan hantar e-mel sched_pnone=Jangan hantar halaman @@ -552,38 +547,3 @@ ldap_pass=Kata laluan pelayan LDAP info_desc=Pemantauan sistem info_last=Status semasa info_title=Sistem dan Status Pelayan - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/mt.auto b/status/lang/mt.auto index 566882c03..23cacc1b9 100644 --- a/status/lang/mt.auto +++ b/status/lang/mt.auto @@ -5,7 +5,7 @@ index_desc=Monitoraġġ index_up=Status index_last=L-aħħar verifika index_local=Lokali -index_madd=Add monitor of type +index_add=Żid il-monitor tat-tip: index_sched=Monitoraġġ Skedat index_scheddesc=Dawwar il-verifika skedata tal-monitors mixgħula jew mitfija, u issettja l-indirizz li għalih il-ħsarat jiġu mibgħuta awtomatikament. index_return=lista tas-servizzi @@ -74,17 +74,13 @@ type_alive=Sistema Alive type_rssh=SSH mill-bogħod type_slapd=Server LDAP type_ldap=Konnessjoni LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Oħloq Monitor mon_edit=Editja Monitoraġġ mon_virtualmin=Twissija! Dan il-monitor huwa assoċjat mad-dominju Virtualmin $1, u għalhekk m'għandux jiġi editjat jew imħassar hawn. mon_header=Tissorvelja d-dettalji mon_header2=Kmandi biex jimxu -mon_header5=Notification options +mon_header3=Għażliet ta 'servizz issorveljati mon_desc=Deskrizzjoni mon_remote=Mexxi fuq ospitanti mon_remotes2=Ħaddem fuq ospiti u gruppi @@ -151,7 +147,6 @@ sched_title=Monitoraġġ Skedat sched_header=Għażliet skedati ta 'monitoraġġ fl-isfond sched_mode=Iċċekkjar skedat ippermetta? sched_email=Rapport tal - istatus tal - email lil -sched_email_def=System default ($1) sched_pager=Rapport dwar l-istatus tal-paġna għan-numru sched_none=Ibgħatx email sched_pnone=Ibgħatx paġni @@ -586,38 +581,3 @@ ldap_pass=Password server LDAP info_desc=Tissorvelja s-sistema info_last=Status attwali info_title=Sistema tas-Sistema u l-Istatus tas-Server - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/nl b/status/lang/nl index 9ead2dfdc..b7d8eabeb 100644 --- a/status/lang/nl +++ b/status/lang/nl @@ -5,6 +5,7 @@ index_desc=Monitoren index_up=Status index_last=Laatst gecontroleerd index_local=Lokaal +index_add=Type monitor toevoegen : index_sched=Geplande Monitors index_scheddesc=Zet de geplande controle van de monitors aan of uit, en geef het adres waar de fouten email automatisch naar toe gestuurd moeten worden. index_return=service lijst @@ -74,6 +75,7 @@ mon_create=Maak Monitor mon_edit=Bewerk Monitor mon_header=Monitor details mon_header2=Opdrachten om uit te voeren +mon_header3=Monitor service opties mon_desc=Omschrijving mon_remote=Uitvoeren op host mon_remotes2=Uitvoeren op host en groepen diff --git a/status/lang/nl.auto b/status/lang/nl.auto index 3b668facc..2548a50fe 100644 --- a/status/lang/nl.auto +++ b/status/lang/nl.auto @@ -1,20 +1,12 @@ -index_madd=Add monitor of type - type_fail2ban=Fail2Ban-server type_init=Opstartactie type_slapd=LDAP-server type_ldap=LDAP-verbinding -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=Waarschuwing! Deze monitor is gekoppeld aan het Virtualmin-domein $1 en mag hier dus niet worden bewerkt of verwijderd. -mon_header5=Notification options mon_etype=Ongeldige naam voor monitortype mon_notifywebhook=Webhook -sched_email_def=System default ($1) sched_warn3=Zolang de service is afgelopen sched_subject=Onderwerpregel voor sms-berichten sched_subject0=Geen (waarschuwing zit in het lichaam) @@ -71,38 +63,3 @@ ldap_pass=LDAP-serverwachtwoord info_desc=Systeemmonitor info_last=Huidige status info_title=Systeem- en serverstatus - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/no b/status/lang/no index 39e39ede6..9ae06fa9a 100644 --- a/status/lang/no +++ b/status/lang/no @@ -5,6 +5,7 @@ index_desc=Overvåking index_up=Status index_last=Siste sjekk index_local=Lokal +index_add=Legg til overvåker av type: index_sched=Tidsplanlagt overvåking index_scheddesc=Slå planlagt sjekking av overvåkere på eller av, og sett e-post adressen som skal motta feilmeldinger index_return=tjenesteliste @@ -79,6 +80,7 @@ mon_edit=Rediger overvåker mon_virtualmin=Advarsel! Denne overvåkeren er tilknyttet Virtualmin-domenet $1, og bør derfor ikke redigeres eller slettes her. mon_header=Overvåker detaljer mon_header2=Kommandoer som skal kjøres +mon_header3=Innstillinger for overvåket tjeneste mon_desc=Beskrivelse mon_remote=Kjør på vert mon_remotes2=Kjør på verter og grupper diff --git a/status/lang/no.auto b/status/lang/no.auto index 8afcc032e..5d3c6a7c3 100644 --- a/status/lang/no.auto +++ b/status/lang/no.auto @@ -1,14 +1,5 @@ -index_madd=Add monitor of type - -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required - -mon_header5=Notification options mon_notifywebhook=Webhook -sched_email_def=System default ($1) sched_warn3=Så lenge tjenesten er oppe sched_webhook=Send status til webhook sched_webhookno=Ikke send @@ -27,38 +18,3 @@ monitor_sub_isup=$1 opp på $2 monitor_pager_isup=$1 : "$2" er opp $3 monitor_snmp_isup=$1:$2 monitor_email_isup=Monitor på $1 for '$2' har oppdaget at tjenesten er oppe på $3 - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/pl b/status/lang/pl index 29e153326..d29e6f7ff 100644 --- a/status/lang/pl +++ b/status/lang/pl @@ -4,6 +4,7 @@ index_host=Na hoście index_desc=Monitorowanie index_up=Stan index_local=Lokalny +index_add=Dodaj monitorowanie: index_sched=Monitorowanie okresowe index_scheddesc=Włącz harmonogram monitorowania i ustaw adres e-mail na który zostaną wysłane raporty błędów. index_return=listy usług diff --git a/status/lang/pl.auto b/status/lang/pl.auto index 19df7c117..d8aa989c9 100644 --- a/status/lang/pl.auto +++ b/status/lang/pl.auto @@ -1,5 +1,4 @@ index_last=Ostatnie sprawdzenie -index_madd=Add monitor of type index_none=Obecnie nie są zdefiniowane żadne monitory. index_oldtime=Status od ostatniej zaplanowanej kontroli w $1 index_esnmp=Moduł jest skonfigurowany do wysyłania pułapek SNMP na stronie Konfiguracja modułu, ale moduł $1 Perl nie jest zainstalowany. Kliknij tutaj, aby pobrać i zainstalować teraz. @@ -12,13 +11,9 @@ type_fail2ban=Serwer Fail2Ban type_init=Działanie rozruchowe type_dns=Wyszukiwanie DNS type_query=Zapytanie SQL -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=Ostrzeżenie! Ten monitor jest powiązany z domeną Virtualmin $1, dlatego nie należy go tutaj edytować ani usuwać. -mon_header5=Notification options +mon_header3=Monitorowane opcje usług mon_eremote2=Nie można się skontaktować z serwerem Webmin $1 : $2 mon_etype=Niepoprawna nazwa typu monitora mon_efails=Brakująca lub niepoprawna liczba awarii @@ -31,7 +26,6 @@ mon_changes1=Pokaż tylko zmiany mon_all=Pokaż wszystkie wydarzenia historyczne mon_nochanges=Nie nastąpiły żadne zmiany statusu w ostatnich $1 wydarzeniach historycznych. -sched_email_def=System default ($1) sched_pager=Raport o stanie strony na numer sched_pnone=Nie wysyłaj stron sched_warn3=Tak długo, jak usługa jest dostępna @@ -267,38 +261,3 @@ du_under=Rozmiar to tylko $1 info_desc=Monitor systemu info_last=Aktualny stan info_title=Status systemu i serwera - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/pt.auto b/status/lang/pt.auto index 63ab96775..c7b8525e2 100644 --- a/status/lang/pt.auto +++ b/status/lang/pt.auto @@ -5,7 +5,7 @@ index_desc=Monitoramento index_up=Status index_last=Última verificação index_local=Local -index_madd=Add monitor of type +index_add=Adicione monitor do tipo: index_sched=Monitoramento agendado index_scheddesc=Ative ou desative a verificação programada de monitores e defina o endereço para o qual as falhas são enviadas automaticamente por email. index_return=lista de serviço @@ -74,17 +74,13 @@ type_alive=Alive System type_rssh=SSH remoto type_slapd=Servidor LDAP type_ldap=Conexão LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Criar monitor mon_edit=Editar monitor mon_virtualmin=Atenção! Este monitor está associado ao domínio Virtualmin $1 e, portanto, não deve ser editado ou excluído aqui. mon_header=Detalhes do monitor mon_header2=Comandos a serem executados -mon_header5=Notification options +mon_header3=Opções de serviço monitorado mon_desc=Descrição mon_remote=Executar no host mon_remotes2=Executar em hosts e grupos @@ -151,7 +147,6 @@ sched_title=Monitoramento agendado sched_header=Opções de monitoramento em segundo plano agendadas sched_mode=Verificação agendada ativada? sched_email=Enviar relatório de status por e-mail para -sched_email_def=System default ($1) sched_pager=Relatório de status da página para número sched_none=Não envie email sched_pnone=Não envie páginas @@ -586,38 +581,3 @@ ldap_pass=Senha do servidor LDAP info_desc=Monitor do sistema info_last=Status atual info_title=Status do sistema e do servidor - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/pt_BR.auto b/status/lang/pt_BR.auto index 63ab96775..c7b8525e2 100644 --- a/status/lang/pt_BR.auto +++ b/status/lang/pt_BR.auto @@ -5,7 +5,7 @@ index_desc=Monitoramento index_up=Status index_last=Última verificação index_local=Local -index_madd=Add monitor of type +index_add=Adicione monitor do tipo: index_sched=Monitoramento agendado index_scheddesc=Ative ou desative a verificação programada de monitores e defina o endereço para o qual as falhas são enviadas automaticamente por email. index_return=lista de serviço @@ -74,17 +74,13 @@ type_alive=Alive System type_rssh=SSH remoto type_slapd=Servidor LDAP type_ldap=Conexão LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Criar monitor mon_edit=Editar monitor mon_virtualmin=Atenção! Este monitor está associado ao domínio Virtualmin $1 e, portanto, não deve ser editado ou excluído aqui. mon_header=Detalhes do monitor mon_header2=Comandos a serem executados -mon_header5=Notification options +mon_header3=Opções de serviço monitorado mon_desc=Descrição mon_remote=Executar no host mon_remotes2=Executar em hosts e grupos @@ -151,7 +147,6 @@ sched_title=Monitoramento agendado sched_header=Opções de monitoramento em segundo plano agendadas sched_mode=Verificação agendada ativada? sched_email=Enviar relatório de status por e-mail para -sched_email_def=System default ($1) sched_pager=Relatório de status da página para número sched_none=Não envie email sched_pnone=Não envie páginas @@ -586,38 +581,3 @@ ldap_pass=Senha do servidor LDAP info_desc=Monitor do sistema info_last=Status atual info_title=Status do sistema e do servidor - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/ro.auto b/status/lang/ro.auto index f98490e14..db37a5e65 100644 --- a/status/lang/ro.auto +++ b/status/lang/ro.auto @@ -5,7 +5,7 @@ index_desc=Monitorizarea index_up=stare index_last=Ultima verificare index_local=Local -index_madd=Add monitor of type +index_add=Adăugați monitor de tip: index_sched=Monitorizare programată index_scheddesc=Activați sau dezactivați verificarea programată a monitoarelor și setați adresa la care eșecurile sunt trimise automat prin e-mail. index_return=lista de servicii @@ -74,17 +74,13 @@ type_alive=Sistemul Alive type_rssh=SSH de la distanță type_slapd=Server LDAP type_ldap=Conexiune LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Creare monitor mon_edit=Editează Monitorul mon_virtualmin=Avertizare! Acest monitor este asociat cu domeniul Virtualmin $1 și, prin urmare, nu ar trebui să fie editat sau șters aici. mon_header=Detaliile monitorizării mon_header2=Comenzile de executat -mon_header5=Notification options +mon_header3=Opțiuni de monitorizare monitorizate mon_desc=Descriere mon_remote=Fugi la gazdă mon_remotes2=Alergați pe gazde și grupuri @@ -151,7 +147,6 @@ sched_title=Monitorizare programată sched_header=Opțiuni de monitorizare de fundal programate sched_mode=Verificare programată activată? sched_email=Raport de stare e-mail către -sched_email_def=System default ($1) sched_pager=Raport privind starea paginii la număr sched_none=Nu trimiteți email sched_pnone=Nu trimiteți pagini @@ -586,38 +581,3 @@ ldap_pass=Parola serverului LDAP info_desc=Monitor de sistem info_last=Statusul curent info_title=Starea sistemului și a serverului - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/ru b/status/lang/ru index 4b1a1168b..39e751a36 100644 --- a/status/lang/ru +++ b/status/lang/ru @@ -5,6 +5,7 @@ index_desc=Датчик index_up=Состояние index_last=Последняя проверка index_local=Локальный +index_add=Добавить датчик: index_sched=Плановая проверка index_return=списку служб index_none=В данный момент нет ни одного датчика. diff --git a/status/lang/ru.auto b/status/lang/ru.auto index 6f9aebdf8..cbe7134f6 100644 --- a/status/lang/ru.auto +++ b/status/lang/ru.auto @@ -1,4 +1,3 @@ -index_madd=Add monitor of type index_scheddesc=Включите или выключите запланированную проверку мониторов и установите адрес, по которому сбои автоматически отправляются по электронной почте. index_esnmp=Модуль настроен на отправку прерываний SNMP на странице «Конфигурация модуля», но Perl-модуль $1 не установлен. Нажмите здесь, чтобы загрузить и установить его сейчас. index_refresh=Обновить статус @@ -31,14 +30,10 @@ type_alive=Живая Система type_rssh=Удаленный SSH type_slapd=Сервер LDAP type_ldap=Соединение LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=Предупреждение! Этот монитор связан с доменом Virtualmin $1, поэтому его не следует редактировать или удалять здесь. mon_header2=Команды для запуска -mon_header5=Notification options +mon_header3=Отслеживаемые варианты обслуживания mon_remotes2=Бег на хостах и группах mon_warndef=Да, и использовать режим отчетности по умолчанию mon_warn3=Да, но никогда не сообщать @@ -76,7 +71,6 @@ mon_changes1=Показать только изменения mon_all=Показать все исторические события mon_nochanges=Никаких изменений статуса не произошло за последние $1 исторических событий. -sched_email_def=System default ($1) sched_pnone=Не отправлять страницы sched_warn3=Пока служба работает sched_eemailserver=Ваш почтовый сервер не установлен : $1 @@ -401,38 +395,3 @@ ldap_pass=Пароль сервера LDAP info_desc=Системный монитор info_last=Текущее состояние info_title=Состояние системы и сервера - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/sk b/status/lang/sk index 9543849b5..e8d56123f 100644 --- a/status/lang/sk +++ b/status/lang/sk @@ -5,6 +5,7 @@ index_desc=Sledovanie index_up=Stav index_last=Posledná kontrola index_local=Lokálne +index_add=Pridať typ sledovania: index_sched=Plánované sledovanie index_return=zoznam služieb index_none=Nie sú nastavené žiadne sledovania. diff --git a/status/lang/sk.auto b/status/lang/sk.auto index 1a99cbd35..516e30523 100644 --- a/status/lang/sk.auto +++ b/status/lang/sk.auto @@ -1,4 +1,3 @@ -index_madd=Add monitor of type index_scheddesc=Zapnite alebo vypnite plánovanú kontrolu monitorov a nastavte adresu, na ktorú sa automaticky zasielajú zlyhania. index_refresh=Obnoviť stav index_refreshdesc=Namiesto čakania na ďalšiu naplánovanú aktualizáciu vykonajte okamžité obnovenie všetkých stavov monitora. @@ -24,14 +23,10 @@ type_alive=Živý systém type_rssh=Vzdialené SSH type_slapd=LDAP Server type_ldap=Pripojenie LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=Výstraha! Tento monitor je priradený k doméne Virtualmin $1, a preto by sa tu nemal upravovať ani mazať. mon_header2=Príkazy na spustenie -mon_header5=Notification options +mon_header3=Sledované možnosti služby mon_remotes2=Beží na hostiteľoch a skupinách mon_ontimeout=Ak monitor vyprší, spustite príkaz mon_eremote2=Webmin server $1 nebolo možné kontaktovať : $2 @@ -63,7 +58,6 @@ mon_changes1=Zobraziť iba zmeny mon_all=Zobraziť všetky historické udalosti mon_nochanges=V posledných historických udalostiach $1 nedošlo k žiadnym zmenám stavu. -sched_email_def=System default ($1) sched_pnone=Neodosielať stránky sched_warn3=Pokiaľ bude služba v prevádzke sched_eemailserver=Váš poštový server nie je nainštalovaný : $1 @@ -364,38 +358,3 @@ ldap_pass=Heslo servera LDAP info_desc=Monitorovanie systému info_last=Súčasný stav info_title=Stav systému a servera - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/sl.auto b/status/lang/sl.auto index c3818649d..e5c986c23 100644 --- a/status/lang/sl.auto +++ b/status/lang/sl.auto @@ -5,7 +5,7 @@ index_desc=Spremljanje index_up=Stanje index_last=Zadnji pregled index_local=Lokalno -index_madd=Add monitor of type +index_add=Dodaj monitor tipa: index_sched=Načrtovani nadzor index_scheddesc=Vključite ali izklopite načrtovano preverjanje monitorjev in nastavite naslov, na katerega bodo napake samodejno poslane. index_return=seznam storitev @@ -74,17 +74,13 @@ type_alive=Alive System type_rssh=Oddaljeni SSH type_slapd=LDAP strežnik type_ldap=LDAP Povezava -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Ustvari Monitor mon_edit=Urejanje monitorja mon_virtualmin=Opozorilo! Ta monitor je povezan z domeno Virtualmin $1, zato ga tukaj ne bi smeli urejati ali brisati. mon_header=Podrobnosti o monitorju mon_header2=Ukazi za zagon -mon_header5=Notification options +mon_header3=Možnosti nadzora nadzorovanih storitev mon_desc=Opis mon_remote=Teči na gostitelju mon_remotes2=Teči na gostiteljih in skupinah @@ -151,7 +147,6 @@ sched_title=Načrtovani nadzor sched_header=Načrtovane možnosti spremljanja ozadja sched_mode=Ali je načrtovano preverjanje omogočeno? sched_email=Poročilo o stanju e-pošte na -sched_email_def=System default ($1) sched_pager=Poročilo o stanju strani na številko sched_none=Ne pošiljajte e-pošte sched_pnone=Ne pošiljajte strani @@ -586,38 +581,3 @@ ldap_pass=Geslo za strežnik LDAP info_desc=Sistemski monitor info_last=Trenutni status info_title=Status sistema in strežnika - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/sv b/status/lang/sv index 598dcf8c0..bbcba3f5b 100644 --- a/status/lang/sv +++ b/status/lang/sv @@ -4,6 +4,7 @@ index_host=På dator index_desc=Övervakar index_up=Status index_local=Lokal +index_add=Lägg till övervakning av typen index_sched=Schemalagd övervakning index_return=tjänstelista diff --git a/status/lang/sv.auto b/status/lang/sv.auto index f1c0cc9ba..e6847a3a3 100644 --- a/status/lang/sv.auto +++ b/status/lang/sv.auto @@ -1,5 +1,4 @@ index_last=Sista kontrollen -index_madd=Add monitor of type index_scheddesc=Slå på eller stäng av schemalagd kontroll av bildskärmar och ställ in adressen till vilka fel automatiskt e-postas. index_none=Inga bildskärmar definieras för närvarande. index_oldtime=Status från senaste schemalagda check vid $1 @@ -48,14 +47,10 @@ type_alive=Levande system type_rssh=Fjärr SSH type_slapd=LDAP-server type_ldap=LDAP-anslutning -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=Varning! Denna bildskärm är associerad med Virtualmin-domänen $1 och bör därför inte redigeras eller tas bort här. mon_header2=Kommandon att köra -mon_header5=Notification options +mon_header3=Övervakade servicealternativ mon_remotes2=Kör på värdar och grupper mon_warndef=Ja, och använd standardrapporteringsläge mon_warn1=Ja, och rapportera om statusändringar @@ -103,7 +98,6 @@ mon_changes1=Visa endast ändringar mon_all=Visa alla historiska händelser mon_nochanges=Inga statusförändringar skedde under de senaste historiska händelserna i $1. -sched_email_def=System default ($1) sched_pager=Sidstatusrapport till nummer sched_none=Skicka inte e-post sched_pnone=Skicka inte sidor @@ -498,38 +492,3 @@ ldap_pass=LDAP-serverlösenord info_desc=Systemmonitor info_last=Nuvarande status info_title=System- och serverstatus - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/th.auto b/status/lang/th.auto index e9d5a93df..49868793d 100644 --- a/status/lang/th.auto +++ b/status/lang/th.auto @@ -5,7 +5,7 @@ index_desc=การตรวจสอบ index_up=สถานะ index_last=ตรวจสอบล่าสุด index_local=ในประเทศ -index_madd=Add monitor of type +index_add=เพิ่มจอภาพประเภท: index_sched=การตรวจสอบตามกำหนดเวลา index_scheddesc=เปิดหรือปิดการตรวจสอบกำหนดการของมอนิเตอร์และตั้งค่าที่อยู่ที่ความล้มเหลวจะถูกส่งอีเมลโดยอัตโนมัติ index_return=รายการบริการ @@ -74,17 +74,13 @@ type_alive=ระบบมีชีวิต type_rssh=SSH ระยะไกล type_slapd=เซิร์ฟเวอร์ LDAP type_ldap=การเชื่อมต่อ LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=สร้างการตรวจสอบ mon_edit=แก้ไขการตรวจสอบ mon_virtualmin=คำเตือน! จอภาพนี้เชื่อมโยงกับโดเมน Virtualmin $1 ดังนั้นจึงไม่ควรแก้ไขหรือลบที่นี่ mon_header=ตรวจสอบรายละเอียด mon_header2=คำสั่งให้เรียกใช้ -mon_header5=Notification options +mon_header3=ตรวจสอบตัวเลือกบริการ mon_desc=ลักษณะ mon_remote=ทำงานบนโฮสต์ mon_remotes2=ทำงานกับโฮสต์และกลุ่ม @@ -151,7 +147,6 @@ sched_title=การตรวจสอบตามกำหนดเวลา sched_header=ตัวเลือกการตรวจสอบประวัติพื้นหลัง sched_mode=เปิดใช้งานการตรวจสอบตามกำหนดเวลาหรือไม่ sched_email=รายงานสถานะอีเมลถึง -sched_email_def=System default ($1) sched_pager=รายงานสถานะหน้าไปยังหมายเลข sched_none=อย่าส่งอีเมล sched_pnone=อย่าส่งหน้า @@ -586,38 +581,3 @@ ldap_pass=รหัสผ่านเซิร์ฟเวอร์ LDAP info_desc=ตรวจสอบระบบ info_last=สถานะปัจจุบัน info_title=สถานะของระบบและเซิร์ฟเวอร์ - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/tr b/status/lang/tr index 3e2a54ebf..81d7e358e 100644 --- a/status/lang/tr +++ b/status/lang/tr @@ -5,6 +5,7 @@ index_desc=İzlenen Servis index_up=Durum index_last=Son kontrol index_local=Yerel +index_add=Bu tipte izleyici ekle: index_sched=Zamanlandırılmış İzleme index_scheddesc=Zamanlandırılmış izleyici kontrolünü açıp kapatabilir ve sorun olduğunda otomatik olarak hangi adrese e-posta gönderileceğini belirleyiniz. index_return=servis listesi diff --git a/status/lang/tr.auto b/status/lang/tr.auto index ddc70ff46..bcf1c02d8 100644 --- a/status/lang/tr.auto +++ b/status/lang/tr.auto @@ -1,4 +1,3 @@ -index_madd=Add monitor of type index_delete=Silme seçildi index_refsel=Seçilenleri Yenile index_group=$1 üyeleri @@ -21,14 +20,10 @@ type_alive=Canlı Sistem type_rssh=Uzak SSH type_slapd=LDAP Sunucusu type_ldap=LDAP Bağlantısı -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=Uyarı! Bu monitör $1 Virtualmin etki alanıyla ilişkilidir ve bu nedenle burada düzenlenmemeli veya silinmemelidir. mon_header2=Çalıştırılacak komutlar -mon_header5=Notification options +mon_header3=İzlenen hizmet seçenekleri mon_remotes2=Ana bilgisayarlarda ve gruplarda çalıştır mon_ontimeout=Monitör zaman aşımına uğrarsa, komutu çalıştırın mon_eremote2=$1 Webmin sunucusuyla bağlantı kurulamadı : $2 @@ -60,7 +55,6 @@ mon_changes1=Yalnızca değişiklikleri göster mon_all=Tüm geçmiş olayları göster mon_nochanges=Son $1 geçmiş etkinlikte durum değişikliği olmadı. -sched_email_def=System default ($1) sched_pnone=Sayfa gönderme sched_offset=ofset ile sched_warn3=Servis açık olduğu sürece @@ -355,38 +349,3 @@ ldap_pass=LDAP sunucusu şifresi info_desc=Sistem monitörü info_last=Şu anki durum info_title=Sistem ve Sunucu Durumu - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/uk b/status/lang/uk index 795bfffda..dd9d91ff4 100644 --- a/status/lang/uk +++ b/status/lang/uk @@ -5,6 +5,7 @@ index_desc=Датчик index_up=Стан index_last=Остання перевірка index_local=Локальний +index_add=Додати датчик: index_sched=Планова перевірка index_return=списку служб index_none=У даний момент немає жодного датчика. diff --git a/status/lang/uk.auto b/status/lang/uk.auto index 50882022b..0e04aa319 100644 --- a/status/lang/uk.auto +++ b/status/lang/uk.auto @@ -1,4 +1,3 @@ -index_madd=Add monitor of type index_scheddesc=Увімкніть або вимкніть планову перевірку моніторів і встановіть адресу, на яку відмовляються автоматично по електронній пошті. index_esnmp=Модуль налаштований для надсилання SNMP-пасток на сторінку Config Module, але модуль Perl $1 не встановлений. Клацніть тут, щоб завантажити та встановити його зараз. index_refresh=Оновити статус @@ -31,14 +30,10 @@ type_alive=Жива система type_rssh=Віддалений SSH type_slapd=Сервер LDAP type_ldap=Підключення LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=Увага! Цей монітор пов’язаний із доменом Virtualmin $1, тому його не слід редагувати чи видаляти тут. mon_header2=Команди для запуску -mon_header5=Notification options +mon_header3=Варіанти обслуговування, що контролюються mon_remotes2=Бігайте за хостами та групами mon_warndef=Так, і використовувати режим звітування за замовчуванням mon_warn3=Так, але ніколи не повідомляйте @@ -76,7 +71,6 @@ mon_changes1=Показати лише зміни mon_all=Показати всі історичні події mon_nochanges=В останніх $1 історичних подіях не відбулося змін статусу. -sched_email_def=System default ($1) sched_pnone=Не надсилайте сторінки sched_warn3=Поки служба закінчується sched_eemailserver=Ваш поштовий сервер не встановлений : $1 @@ -401,38 +395,3 @@ ldap_pass=Пароль сервера LDAP info_desc=Системний монітор info_last=Поточний статус info_title=Статус системи та сервера - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/ur.auto b/status/lang/ur.auto index 94a5fe0b0..51726ba0b 100644 --- a/status/lang/ur.auto +++ b/status/lang/ur.auto @@ -5,7 +5,7 @@ index_desc=نگرانی index_up=حالت index_last=آخری چیک index_local=مقامی -index_madd=Add monitor of type +index_add=قسم کا مانیٹر شامل کریں: index_sched=شیڈول مانیٹرنگ index_scheddesc=مانیٹروں کی شیڈول چیکنگ کو آن یا آف کریں ، اور ایڈریس مرتب کریں جس میں ناکامیوں کو خود بخود ای میل کیا جائے۔ index_return=خدمت کی فہرست @@ -74,17 +74,13 @@ type_alive=زندہ نظام type_rssh=ریموٹ SSH type_slapd=ایل ڈی اے پی سرور type_ldap=ایل ڈی اے پی کنکشن -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=مانیٹر بنائیں mon_edit=مانیٹر میں ترمیم کریں mon_virtualmin=انتباہ! یہ مانیٹر ورچوئل مین ڈومین$1 کے ساتھ وابستہ ہے ، اور اس لئے یہاں ترمیم یا حذف نہیں ہونا چاہئے۔ mon_header=تفصیلات مانیٹر کریں mon_header2=چلانے کے لئے حکم دیتا ہے -mon_header5=Notification options +mon_header3=نگرانی کی خدمات کے اختیارات mon_desc=تفصیل mon_remote=میزبان پر چلائیں mon_remotes2=میزبانوں اور گروپوں پر چلائیں @@ -151,7 +147,6 @@ sched_title=شیڈول مانیٹرنگ sched_header=شیڈول پس منظر کی نگرانی کے اختیارات sched_mode=شیڈول چیکنگ اہل ہے؟ sched_email=ای میل کی حیثیت کی رپورٹ -sched_email_def=System default ($1) sched_pager=صفحہ نمبر کی تعداد sched_none=ای میل مت بھیجیں sched_pnone=صفحات مت بھیجیں @@ -586,38 +581,3 @@ ldap_pass=LDAP سرور کا پاس ورڈ info_desc=سسٹم مانیٹر info_last=موجودہ صورت حال info_title=سسٹم اور سرور کی حیثیت - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/vi.auto b/status/lang/vi.auto index 30468b5e0..4f8cc2033 100644 --- a/status/lang/vi.auto +++ b/status/lang/vi.auto @@ -5,7 +5,7 @@ index_desc=Giám sát index_up=Trạng thái index_last=Kiểm tra cuối cùng index_local=Địa phương -index_madd=Add monitor of type +index_add=Thêm màn hình loại: index_sched=Giám sát theo lịch trình index_scheddesc=Bật hoặc tắt kiểm tra màn hình theo lịch trình và đặt địa chỉ mà các lỗi được tự động gửi qua email. index_return=danh sách dịch vụ @@ -74,17 +74,13 @@ type_alive=Hệ thống sống type_rssh=SSH từ xa type_slapd=Máy chủ LDAP type_ldap=Kết nối LDAP -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_create=Tạo màn hình mon_edit=Chỉnh sửa màn hình mon_virtualmin=Cảnh báo! Màn hình này được liên kết với miền Virtualmin $1, do đó bạn không nên chỉnh sửa hoặc xóa tại đây. mon_header=Giám sát chi tiết mon_header2=Các lệnh để chạy -mon_header5=Notification options +mon_header3=Tùy chọn dịch vụ được giám sát mon_desc=Sự miêu tả mon_remote=Chạy trên máy chủ mon_remotes2=Chạy trên máy chủ và nhóm @@ -151,7 +147,6 @@ sched_title=Giám sát theo lịch trình sched_header=Tùy chọn giám sát nền theo lịch trình sched_mode=Kiểm tra theo lịch trình kích hoạt? sched_email=Báo cáo trạng thái email đến -sched_email_def=System default ($1) sched_pager=Trang báo cáo trạng thái số sched_none=Đừng gửi email sched_pnone=Đừng gửi trang @@ -586,38 +581,3 @@ ldap_pass=Mật khẩu máy chủ LDAP info_desc=Giám sát hệ thống info_last=Tình trạng hiện tại info_title=Trạng thái hệ thống và máy chủ - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/zh b/status/lang/zh index b9a29bb5b..c9cc3fd05 100644 --- a/status/lang/zh +++ b/status/lang/zh @@ -5,6 +5,7 @@ index_desc=监视 index_up=状态 index_last=最近的检查 index_local=本地 +index_add=增加监视的类型 index_sched=定时监视 index_scheddesc=打开或关闭监视器的定时检查，并设置故障自动通过电子邮件发送到的地址。 index_return=服务列表 @@ -134,6 +135,7 @@ mon_onemem=一个成员 mon_members=$1 成员 mon_enoremote=没有要在所选主机或组上运行的主机或组 mon_tmpl=消息模板 +mon_notmpl无（使用Webmin默认值） mon_header4=状态历史 mon_hwhen=检查日期 mon_hold=旧状态 @@ -179,6 +181,7 @@ sched_smtp_prog=本地 sendmail 可执行文件 sched_smtp_server=SMTP 服务器 sched_esmtp=未输入或无效的 SMTP 服务器 sched_esmtpcmd=SMTP 命令 $1 失败 : $2 +sched_eemailserver未安装邮件服务器 : $1 sched_sms=发送短信给 sched_smsno=Nobody sched_smscarrier=电话 @@ -614,3 +617,5 @@ imap_pass=IMAP 密码 imap_ehost=IMAP 服务器主机丢失或无法解析 imap_eport=IMAP 服务器端口号缺失或非数字 imap_euser=缺少 IMAP 登录 + +__norefs=1 diff --git a/status/lang/zh.auto b/status/lang/zh.auto deleted file mode 100644 index cb0c4c309..000000000 --- a/status/lang/zh.auto +++ /dev/null @@ -1,10 +0,0 @@ -index_madd=Add monitor of type - -type_reboot=Reboot Required - -mon_notmpl=None (use Webmin defaults) - -sched_email_def=System default ($1) -sched_eemailserver=Your mail server is not installed : $1 - -reboot_pkgs=Package updates require a reboot diff --git a/status/lang/zh_TW b/status/lang/zh_TW index b97e21f0b..37ddf2c84 100644 --- a/status/lang/zh_TW +++ b/status/lang/zh_TW @@ -5,6 +5,7 @@ index_desc=監控 index_up=狀態 index_last=最近的檢查 index_local=本地 +index_add=增加監控的類型： index_sched=定時監控 index_return=服務列表 index_none=目前沒有被禁用的監控。 diff --git a/status/lang/zh_TW.auto b/status/lang/zh_TW.auto index 86cdfaf79..2bc5b1b71 100644 --- a/status/lang/zh_TW.auto +++ b/status/lang/zh_TW.auto @@ -1,4 +1,3 @@ -index_madd=Add monitor of type index_scheddesc=打開或關閉對監視器的計劃檢查，並設置將故障自動發送到的地址。 index_esnmp=該模塊配置為在Module Config頁面上發送SNMP陷阱，但是未安裝 $1 Perl模塊。 單擊此處立即下載並安裝。 index_refresh=刷新狀態 @@ -27,14 +26,10 @@ type_alive=生存系統 type_rssh=遠程SSH type_slapd=LDAP服務器 type_ldap=LDAP連接 -type_smtp=SMTP Connection -type_imap=IMAP Connection -type_firewalld=FirewallD Server -type_reboot=Reboot Required mon_virtualmin=警告！該監視器與Virtualmin域 $1相關聯，因此不應在此處進行編輯或刪除。 mon_header2=運行命令 -mon_header5=Notification options +mon_header3=監控服務選項 mon_remotes2=在主機和組上運行 mon_ontimeout=如果監視器超時，請運行命令 mon_eremote2=無法聯繫Webmin服務器 $1 : $2 @@ -69,7 +64,6 @@ mon_changes1=僅顯示更改 mon_all=顯示所有歷史事件 mon_nochanges=最近 $1個歷史事件未發生狀態更改。 -sched_email_def=System default ($1) sched_pnone=不發送頁面 sched_warn3=只要服務啟動 sched_eemailserver=您的郵件服務器未安裝： $1 @@ -377,38 +371,3 @@ ldap_pass=LDAP服務器密碼 info_desc=系統監控器 info_last=當前狀態 info_title=系統和服務器狀態 - -smtp_host=SMTP server host -smtp_port=SMTP server port -smtp_ssl=Use SSL connection? -smtp_ssl0=Plaintext only -smtp_ssl1=Always SSL -smtp_ssl2=Switch to SSL with STARTTLS -smtp_from=Test SMTP sender -smtp_none=None -smtp_addr=Use address -smtp_to=Test SMTP recipient -smtp_ehost=Missing or unresolvable SMTP server host -smtp_eport=Missing or non-numeric SMTP server port -smtp_efrom=Sender address must be like user@domain.com -smtp_eto=Recipient address must be like user@domain.com -smtp_ok1=HELO command accepted -smtp_ok2=Sender address accepted -smtp_ok3=Recipient address accepted -smtp_ok4=SMTP login accepted -smtp_user=SMTP authentication -smtp_user1=Don't login -smtp_user0=Login as user -smtp_pass=with password -smtp_euser=Missing SMTP login - -imap_host=IMAP server host -imap_port=IMAP server port -imap_ssl=Use SSL connection? -imap_user=IMAP login -imap_pass=IMAP password -imap_ehost=Missing or unresolvable IMAP server host -imap_eport=Missing or non-numeric IMAP server port -imap_euser=Missing IMAP login - -reboot_pkgs=Package updates require a reboot diff --git a/stunnel/lang/de b/stunnel/lang/de index 0d99d95a9..f773a3f08 100644 --- a/stunnel/lang/de +++ b/stunnel/lang/de @@ -29,6 +29,7 @@ edit_name=Dienstname edit_port=TCP-Port edit_active=Aktiv? edit_header2=Tunnel-Zieloptionen +edit_mode0inetd-Stil-Programm ausführen edit_mode1=Programm im PTY ausführen edit_mode2=Mit Remote-Host verbinden edit_cmd=Pfad zum Programm @@ -67,4 +68,4 @@ log_apply=Änderungen angewendet log_create=SSL-Tunnel $1 erstellt log_delete=SSL-Tunnel $1 gelöscht log_modify=SSL-Tunnel $1 geändert -log_delete_stunnels=$1 SSL-Tunnel gelöscht +log_delete_stunnels=$1 SSL-Tunnel gelöscht \ No newline at end of file diff --git a/stunnel/lang/de.auto b/stunnel/lang/de.auto deleted file mode 100644 index c164e16a5..000000000 --- a/stunnel/lang/de.auto +++ /dev/null @@ -1 +0,0 @@ -edit_mode0=Run inetd style program diff --git a/syslog-ng/lang/de b/syslog-ng/lang/de index 4c7ee287a..8fa35192d 100644 --- a/syslog-ng/lang/de +++ b/syslog-ng/lang/de @@ -290,4 +290,4 @@ log_delete_logs=$1 Protokollziele gelöscht log_apply=Konfiguration angewendet log_start=Syslog-NG-Server gestartet log_stop=Syslog-NG-Server gestoppt -log_options=Globale Optionen geändert +log_options=Globale Optionen geändert \ No newline at end of file diff --git a/syslog/lang/de b/syslog/lang/de index 71789ac14..0e62f379b 100644 --- a/syslog/lang/de +++ b/syslog/lang/de @@ -28,8 +28,8 @@ index_viewok=Ansehen restart_ekill=Fehler beim Signalisieren des Syslog-Prozesses $1: $2 restart_ecannot=Sie sind nicht berechtigt, syslog neu zu starten - start_ecannot=Sie sind nicht berechtigt, syslog zu starten + edit_title=Systemprotokoll bearbeiten create_title=Systemprotokoll hinzufügen edit_header1=Protokollziel @@ -108,4 +108,4 @@ acl_all=Alle Protokolle acl_sel=Nur aufgelistete Dateien und diejenigen unter aufgelisteten Verzeichnissen .. acl_extra=Zusätzliche Protokolldateien für diesen Benutzer acl_syslog=Kann Protokolle aus syslog anzeigen? -acl_others=Kann Protokolle aus anderen Modulen anzeigen? +acl_others=Kann Protokolle aus anderen Modulen anzeigen? \ No newline at end of file diff --git a/system-status/lang/de b/system-status/lang/de index af96a5526..15333e3f8 100644 --- a/system-status/lang/de +++ b/system-status/lang/de @@ -58,4 +58,4 @@ acl_temp=CPU- und Festplattentemperaturen acl_load=CPU-Auslastung und Prozesse acl_mem=Freier Speicher und Swap acl_disk=Freier Speicherplatz -acl_poss=Pakete-Updates +acl_poss=Pakete-Updates \ No newline at end of file diff --git a/tcpwrappers/lang/de b/tcpwrappers/lang/de index c4d5bb844..463e33b88 100644 --- a/tcpwrappers/lang/de +++ b/tcpwrappers/lang/de @@ -30,4 +30,4 @@ save_ecmd=Befehlseingabe enthält ungültige Zeichen save_eservice=Daemon-Namen enthalten ungültige Zeichen del_errtitle=Fehler beim Löschen von Regeln -del_enone=Keine Regeln zum Löschen markiert +del_enone=Keine Regeln zum Löschen markiert \ No newline at end of file diff --git a/time/lang/af.auto b/time/lang/af.auto index 14ba57e99..6f9344d86 100644 --- a/time/lang/af.auto +++ b/time/lang/af.auto @@ -19,7 +19,6 @@ index_tabsync2=Begin stelsel $1 diens vir sinchronisasie index_desctime=Hierdie vorm is bedoel om die huidige tyd van die stelsel te verander, wat deur alle prosesse gebruik word. Op bedryfstelsels met 'n aparte hardewareklok kan dit ook gebruik word om dit in te stel. index_desczone=Met hierdie vorm kan u die standaardtydsone van die stelsel instel, wat gebruik word om die stelseltyd te omskep in 'n leesbare formaat en verreken. index_descsync=Hierdie vorm is bedoel om die stelsel op te stel om die tyd outomaties met 'n eksterne bediener te sinchroniseer. Synchronisasie sal met behulp van die Unix time protokol of NTP geskied, afhangend van watter opdragte geïnstalleer is en wat die afstandstelsel ondersteun. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Save action_apply=aansoek doen diff --git a/time/lang/ar.auto b/time/lang/ar.auto index e1fb239c4..d2793a983 100644 --- a/time/lang/ar.auto +++ b/time/lang/ar.auto @@ -19,7 +19,6 @@ index_tabsync2=قم بتشغيل خدمة النظام $1 للمزام index_desctime=هذا النموذج مخصص لتغيير الوقت الحالي للنظام ، والذي يتم استخدامه من قبل جميع العمليات الجارية. على أنظمة التشغيل التي تحتوي على ساعة جهاز منفصلة ، يمكن استخدامها لتعيين ذلك أيضًا. index_desczone=يسمح لك هذا النموذج بتعيين المنطقة الزمنية الافتراضية للنظام ، والتي تُستخدم لتحويل وقت النظام إلى تنسيق قابل للقراءة بواسطة الإنسان والإزاحة. index_descsync=هذا النموذج مخصص لتكوين النظام لمزامنة الوقت تلقائيًا مع خادم بعيد. ستتم المزامنة باستخدام بروتوكول Unix time أو NTP ، اعتمادًا على الأوامر التي تم تثبيتها وما يدعمه النظام البعيد. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=حفظ action_apply=تطبيق diff --git a/time/lang/be.auto b/time/lang/be.auto index 3e7e0e999..5920e11a3 100644 --- a/time/lang/be.auto +++ b/time/lang/be.auto @@ -19,7 +19,6 @@ index_tabsync2=Запусціце сістэмную службу $1 д index_desctime=Гэтая форма прызначана для змены бягучага часу сістэмы, якая выкарыстоўваецца ва ўсіх запушчаных працэсах. У аперацыйных сістэмах, якія маюць асобны апаратны гадзіннік, яго таксама можна ўсталяваць. index_desczone=Гэтая форма дазваляе ўсталяваць гадзінны пояс па змаўчанні сістэмы, які выкарыстоўваецца для пераўтварэння сістэмнага часу ў зручны для чалавека фармат і зрушэнне. index_descsync=Гэтая форма прызначана для налады сістэмы для аўтаматычнай сінхранізацыі часу з выдаленым серверам. Сінхранізацыя будзе ажыццяўляцца з дапамогай пратакола Unix time або NTP, у залежнасці ад таго, якія каманды ўсталёўваюцца і што падтрымлівае выдаленая сістэма. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Захаваць action_apply=Ужываць diff --git a/time/lang/bg.auto b/time/lang/bg.auto index f68e6455c..eb79c60dd 100644 --- a/time/lang/bg.auto +++ b/time/lang/bg.auto @@ -19,7 +19,6 @@ index_tabsync2=Стартирайте системна услуга $1 index_desctime=Тази форма е за промяна на текущото време на системата, което се използва от всички работещи процеси. В операционни системи, които имат отделен хардуерен часовник, може да се използва и за това. index_desczone=Този формуляр ви позволява да зададете часовата зона по подразбиране на системата, която се използва за преобразуване на системното време в четим от хора формат и компенсиране. index_descsync=Този формуляр е за конфигуриране на системата за автоматично синхронизиране на времето с отдалечен сървър. Синхронизацията ще се извърши с помощта на протокола Unix time или NTP, в зависимост от това кои команди са инсталирани и какво поддържа отдалечената система. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Запази action_apply=Приложи diff --git a/time/lang/ca.auto b/time/lang/ca.auto index c4fd5ca23..8fa81f136 100644 --- a/time/lang/ca.auto +++ b/time/lang/ca.auto @@ -1,5 +1,4 @@ index_serviceonboot=Sí, i comença des de l'arrencada index_tabsync2=Executeu el servei $1 del sistema per a la sincronització -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. error_serviceunknown=Servei desconegut : $1 diff --git a/time/lang/cs.auto b/time/lang/cs.auto index 5c5bb245b..70b8c86d8 100644 --- a/time/lang/cs.auto +++ b/time/lang/cs.auto @@ -1,7 +1,6 @@ index_serviceonboot=Ano a začněte při startu index_boot=Synchronizovat při spuštění Webmin? index_tabsync2=Spusťte systémovou službu $1 pro synchronizaci -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. minute=Minuta second=Druhý diff --git a/time/lang/da.auto b/time/lang/da.auto index 1fc0d7410..61f7ab96f 100644 --- a/time/lang/da.auto +++ b/time/lang/da.auto @@ -19,7 +19,6 @@ index_tabsync2=Kør systemtjenesten $1 til synkronisering index_desctime=Denne formular er til ændring af systemets aktuelle tid, der bruges af alle kørende processer. På operativsystemer, der har et separat hardwareur, kan det også bruges til at indstille det. index_desczone=Denne formular giver dig mulighed for at indstille systemets standardtidszone, der bruges til at konvertere systemtiden til et menneskeligt læsbart format og offset. index_descsync=Denne formular er til konfigurering af systemet til automatisk at synkronisere tiden med en ekstern server. Synkronisering udføres ved hjælp af Unix tid -protokollen eller NTP, afhængigt af hvilke kommandoer, der er installeret, og hvad fjernsystemet understøtter. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Gemme action_apply=ansøge diff --git a/time/lang/de b/time/lang/de index 5fb39a71f..e26a0bce0 100644 --- a/time/lang/de +++ b/time/lang/de @@ -71,4 +71,4 @@ log_timezone=Zeitzone auf $1 geändert timezone_err=Fehler beim Speichern der Zeitzone timezone_ecannot=Sie sind nicht berechtigt, die Zeitzone zu ändern -timezone_enone=Keine Zone ausgewählt +timezone_enone=Keine Zone ausgewählt \ No newline at end of file diff --git a/time/lang/el.auto b/time/lang/el.auto index 3f8a0eff3..f1f8a958a 100644 --- a/time/lang/el.auto +++ b/time/lang/el.auto @@ -19,7 +19,6 @@ index_tabsync2=Εκτελέστε την υπηρεσία συστήματος < index_desctime=Αυτή η φόρμα είναι για την αλλαγή της τρέχουσας ώρας του συστήματος, η οποία χρησιμοποιείται από όλες τις τρέχουσες διαδικασίες. Σε λειτουργικά συστήματα που έχουν ξεχωριστό ρολόι υλικού, μπορεί να χρησιμοποιηθεί και για αυτό. index_desczone=Αυτή η φόρμα σας επιτρέπει να ρυθμίσετε την προκαθορισμένη ζώνη ώρας του συστήματος, η οποία χρησιμοποιείται για τη μετατροπή του χρόνου του συστήματος σε μορφή αναγνώσιμη από τον άνθρωπο και μετατόπιση. index_descsync=Αυτή η φόρμα είναι για τη ρύθμιση του συστήματος ώστε να συγχρονίζεται αυτόματα ο χρόνος με έναν απομακρυσμένο διακομιστή. Ο συγχρονισμός θα γίνει χρησιμοποιώντας το πρωτόκολλο Unix ή NTP, ανάλογα με τις εντολές που έχουν εγκατασταθεί και τι υποστηρίζει το απομακρυσμένο σύστημα. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Αποθηκεύσετε action_apply=Ισχύουν diff --git a/time/lang/es.auto b/time/lang/es.auto index 7dfaf6889..370fae9de 100644 --- a/time/lang/es.auto +++ b/time/lang/es.auto @@ -8,7 +8,6 @@ index_tabsync2=Ejecute el servicio del sistema $1 para sincronización index_desctime=Este formulario es para cambiar la hora actual del sistema, que es utilizada por todos los procesos en ejecución. En los sistemas operativos que tienen un reloj de hardware separado, también se puede usar para configurarlo. index_desczone=Este formulario le permite establecer la zona horaria predeterminada del sistema, que se utiliza para convertir la hora del sistema a un formato y desplazamiento legibles por el ser humano. index_descsync=Este formulario es para configurar el sistema para sincronizar automáticamente la hora con un servidor remoto. La sincronización se realizará mediante el protocolo Unix time o NTP, según los comandos que estén instalados y el soporte del sistema remoto. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. minute=Minuto second=Segundo diff --git a/time/lang/eu.auto b/time/lang/eu.auto index 65f3bff84..b9ec1bdb1 100644 --- a/time/lang/eu.auto +++ b/time/lang/eu.auto @@ -19,7 +19,6 @@ index_tabsync2=Exekutatu sistemaren $1 zerbitzua sinkronizatzeko index_desctime=Inprimaki hau sistemaren ordua aldatzeko da, exekutatzen ari diren prozesu guztiek erabiltzen dutena. Aparteko hardware erloju bat duten sistema eragileetan ere erabil daiteke. index_desczone=Inprimaki honek sistemaren ordu-zona lehenetsia egiteko aukera ematen du, sistemaren ordua gizakiaren irakurketa formatua eta desplazamendu bihurtzeko erabiltzen dena. index_descsync=Inprimaki hau sistema automatikoki denbora urruneko zerbitzari batekin sinkronizatzeko konfiguratzeko da. Sinkronizazioa Unix time protokoloa edo NTP erabiliz egingo da, zein komando instalatuta dauden eta zer urruneko sistema onartzen duen. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Save action_apply=aplikatu diff --git a/time/lang/fa.auto b/time/lang/fa.auto index 3947ec558..8d427f436 100644 --- a/time/lang/fa.auto +++ b/time/lang/fa.auto @@ -8,7 +8,6 @@ index_tabsync2=سرویس $1 سیستم را برای همگام ساز index_desctime=این فرم برای تغییر زمان فعلی سیستم است که توسط کلیه فرایندهای در حال اجرا استفاده می شود. در سیستم عامل هایی که دارای یک ساعت سخت افزاری جداگانه هستند ، می توان از آن برای تنظیم آن نیز استفاده کرد. index_desczone=این فرم به شما امکان می دهد منطقه زمانی پیش فرض سیستم را تنظیم کنید ، که برای تبدیل زمان سیستم به یک قالب و افست قابل خواندن توسط انسان استفاده می شود. index_descsync=این فرم برای پیکربندی سیستم برای همگام سازی خودکار زمان با سرور از راه دور است. همگام سازی بسته به نوع دستورات نصب شده و پشتیبانی از سیستم از راه دور ، با استفاده از پروتکل Unix زمان یا NTP انجام خواهد شد. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. acl_ntp=آیا می توان با سرور زمان همگام سازی کرد؟ acl_nontp=شما مجاز به هماهنگی با سرور زمان نیستید diff --git a/time/lang/fi.auto b/time/lang/fi.auto index 2f6776901..4a51d1b13 100644 --- a/time/lang/fi.auto +++ b/time/lang/fi.auto @@ -19,7 +19,6 @@ index_tabsync2=Suorita järjestelmän $1 -palvelu synkronointia varten index_desctime=Tämä muoto on tarkoitettu järjestelmän nykyisen ajan muuttamiseen, jota kaikki käynnissä olevat prosessit käyttävät. Käyttöjärjestelmissä, joissa on erillinen laitteistokello, sitä voidaan käyttää myös tämän asettamiseen. index_desczone=Tämän lomakkeen avulla voit asettaa järjestelmän oletusaikavyöhykkeen, jota käytetään muuntamaan järjestelmän aika ihmisen luettavaan muotoon ja siirtymään. index_descsync=Tämä lomake on tarkoitettu järjestelmän määrittämiseen synkronoimaan aika automaattisesti etäpalvelimen kanssa. Synkronointi tapahtuu käyttämällä Unix time -protokollaa tai NTP-protokollaa riippuen asennetuista komennoista ja siitä, mitä etäjärjestelmä tukee. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Tallentaa action_apply=Käytä diff --git a/time/lang/fr.auto b/time/lang/fr.auto index ab9124535..d2cd4649f 100644 --- a/time/lang/fr.auto +++ b/time/lang/fr.auto @@ -1,5 +1,4 @@ index_serviceonboot=Oui, et démarrez au démarrage index_tabsync2=Exécuter le service système $1 pour la synchronisation -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. error_serviceunknown=Service inconnu  : $1 diff --git a/time/lang/he.auto b/time/lang/he.auto index 5af1b69ea..6bde43899 100644 --- a/time/lang/he.auto +++ b/time/lang/he.auto @@ -19,7 +19,6 @@ index_tabsync2=הפעל את שירות $1 של המערכת לסנכר index_desctime=טופס זה מיועד לשינוי הזמן הנוכחי של המערכת, המשמש את כל התהליכים הרצים. במערכות הפעלה עם שעון חומרה נפרד, ניתן להשתמש בה גם כדי להגדיר את זה. index_desczone=טופס זה מאפשר לך להגדיר את אזור הזמן המוגדר כברירת מחדל של המערכת, המשמש להמרת זמן המערכת לפורמט וקיזוז אנושי. index_descsync=טופס זה מיועד להגדרת המערכת לסנכרון אוטומטי של הזמן עם שרת מרוחק. הסנכרון ייעשה באמצעות פרוטוקול זמן Unix או NTP, תלוי באיזו פקודות מותקנות ומה תומכת במערכת המרוחקת. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=להציל action_apply=להגיש מועמדות diff --git a/time/lang/hr.auto b/time/lang/hr.auto index e9695e2e5..f612b4241 100644 --- a/time/lang/hr.auto +++ b/time/lang/hr.auto @@ -19,7 +19,6 @@ index_tabsync2=Pokrenite sistemsku uslugu $1 za sinkronizaciju index_desctime=Ovaj je obrazac za promjenu trenutnog vremena sustava, koji se koristi u svim pokrenutim procesima. Na operativnim sustavima koji imaju zaseban hardverski sat, može se koristiti i za postavljanje. index_desczone=Ovaj obrazac omogućuje vam postavljanje zadane vremenske zone sustava koja se koristi za pretvaranje vremena sustava u ljudski čitljiv format i offset. index_descsync=Ovaj je obrazac namijenjen konfiguriranju sustava za automatsku sinkronizaciju vremena s udaljenim poslužiteljem. Sinkronizacija će se izvoditi pomoću Unix vremena protokola ili NTP-a, ovisno o tome koje su naredbe instalirane i što udaljeni sustav podržava. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Uštedjeti action_apply=primijeniti diff --git a/time/lang/hu.auto b/time/lang/hu.auto index 1cacfc66b..962506c58 100644 --- a/time/lang/hu.auto +++ b/time/lang/hu.auto @@ -8,7 +8,6 @@ index_tabsync2=Futtassa a $1 rendszerszolgáltatást a szinkronizálás index_desctime=Ez az űrlap a rendszer aktuális idejének megváltoztatására szolgál, amelyet az összes futó folyamat felhasznál. Az operációs rendszereken, amelyek külön hardveres órával rendelkeznek, ez szintén beállítható. index_desczone=Ez az űrlap lehetővé teszi a rendszer alapértelmezett időzónájának beállítását, amelyet arra használnak, hogy a rendszeridőt emberi olvasható formátumra és ofszetre konvertálják. index_descsync=Ez az űrlap annak konfigurálására szolgál, hogy a rendszer automatikusan szinkronizálja az időt a távoli kiszolgálóval. A szinkronizálás az Unix time protokoll vagy NTP használatával történik, attól függően, hogy mely parancsok vannak telepítve és mi a távoli rendszer által támogatott. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. minute=Perc second=Második diff --git a/time/lang/it.auto b/time/lang/it.auto index 664eb5b70..a601fc9f9 100644 --- a/time/lang/it.auto +++ b/time/lang/it.auto @@ -7,7 +7,6 @@ index_tabsync2=Esegui il servizio di sistema $1 per la sincronizzazione index_desctime=Questo modulo serve per modificare l'ora corrente del sistema, utilizzata da tutti i processi in esecuzione. Sui sistemi operativi che hanno un orologio hardware separato, può essere utilizzato anche per impostarlo. index_desczone=Questo modulo consente di impostare il fuso orario predefinito del sistema, che viene utilizzato per convertire l'ora del sistema in un formato leggibile e in offset. index_descsync=Questo modulo serve per configurare il sistema per sincronizzare automaticamente l'ora con un server remoto. La sincronizzazione verrà eseguita utilizzando il protocollo Unix time o NTP, a seconda di quali comandi sono installati e di cosa supporta il sistema remoto. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. minute=minuto second=Secondo diff --git a/time/lang/ja.auto b/time/lang/ja.auto index 67d784295..fe642839c 100644 --- a/time/lang/ja.auto +++ b/time/lang/ja.auto @@ -10,7 +10,6 @@ index_tabsync2=同期のためにシステム $1 サービスを実行 index_desctime=この形式は、実行中のすべてのプロセスで使用されるシステムの現在時刻を変更するためのものです。別のハードウェアクロックを持つオペレーティングシステムでは、それを設定するためにも使用できます。 index_desczone=このフォームを使用すると、システムのデフォルトのタイムゾーンを設定できます。これは、システム時刻を人間が読める形式とオフセットに変換するために使用されます。 index_descsync=このフォームは、リモートサーバーと時刻を自動的に同期するようにシステムを構成するためのものです。同期は、インストールされているコマンドとリモートシステムがサポートするものに応じて、Unix timeプロトコルまたはNTPを使用して行われます。 -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. acl_timezone=ユーザーはタイムゾーンを設定できますか？ acl_ntp=タイムサーバーと同期できますか？ diff --git a/time/lang/ko.auto b/time/lang/ko.auto index 020322f19..1d9886c07 100644 --- a/time/lang/ko.auto +++ b/time/lang/ko.auto @@ -8,7 +8,6 @@ index_tabsync2=동기화를 위해 시스템 $1 서비스 실행 index_desctime=이 양식은 시스템의 현재 시간을 변경하기위한 것으로, 실행중인 모든 프로세스에서 사용됩니다. 별도의 하드웨어 시계가있는 운영 체제에서도이를 설정할 수 있습니다. index_desczone=이 형식을 사용하면 시스템 시간을 사람이 읽을 수있는 형식과 오프셋으로 변환하는 데 사용되는 시스템의 기본 시간대를 설정할 수 있습니다. index_descsync=이 양식은 시간을 원격 서버와 자동으로 동기화하도록 시스템을 구성하기위한 것입니다. 설치된 명령과 원격 시스템이 지원하는 항목에 따라 Unix 시간 프로토콜 또는 NTP를 사용하여 동기화가 수행됩니다. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. minute=분 second=둘째 diff --git a/time/lang/lt.auto b/time/lang/lt.auto index 532f0d09a..9d5a43301 100644 --- a/time/lang/lt.auto +++ b/time/lang/lt.auto @@ -19,7 +19,6 @@ index_tabsync2=Paleiskite sistemos $1 paslaugą sinchronizavimui index_desctime=Ši forma skirta pakeisti esamą sistemos laiką, kurį naudoja visi vykdomi procesai. Operacinėse sistemose, turinčiose atskirą aparatinės įrangos laikrodį, jis gali būti naudojamas ir tam nustatyti. index_desczone=Ši forma leidžia nustatyti numatytąją sistemos laiko juostą, kuri naudojama norint konvertuoti sistemos laiką į žmonėms suprantamą formatą ir kompensuoti. index_descsync=Ši forma skirta konfigūruoti sistemą, kad ji automatiškai sinchronizuotų laiką su nuotoliniu serveriu. Sinchronizavimas bus atliekamas naudojant „Unix“ laiko protokolą arba NTP, atsižvelgiant į tai, kurios komandos yra įdiegtos ir ką palaiko nuotolinė sistema. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Sutaupyti action_apply=Taikyti diff --git a/time/lang/lv.auto b/time/lang/lv.auto index bbb18d1d4..a8cbe17ad 100644 --- a/time/lang/lv.auto +++ b/time/lang/lv.auto @@ -19,7 +19,6 @@ index_tabsync2=Palaidiet sistēmas $1 pakalpojumu sinhronizācijai index_desctime=Šī forma ir paredzēta, lai mainītu sistēmas pašreizējo laiku, kuru izmanto visi darbojošie procesi. Operētājsistēmās, kurām ir atsevišķs aparatūras pulkstenis, to var izmantot arī šī iestatīšanai. index_desczone=Šī forma ļauj iestatīt sistēmas noklusējuma laika joslu, kas tiek izmantota, lai pārveidotu sistēmas laiku cilvēkam lasāmā formātā un nobīdē. index_descsync=Šī veidlapa ir paredzēta sistēmas konfigurēšanai, lai automātiski sinhronizētu laiku ar attālo serveri. Sinhronizācija tiks veikta, izmantojot Unix laiks protokolu vai NTP, atkarībā no tā, kuras komandas ir instalētas un ko atbalsta attālā sistēma. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Saglabāt action_apply=Piesakies diff --git a/time/lang/ms.auto b/time/lang/ms.auto index deac0c435..3e94fe352 100644 --- a/time/lang/ms.auto +++ b/time/lang/ms.auto @@ -1,5 +1,4 @@ index_serviceonboot=Ya, dan mulakan pada but index_tabsync2=Jalankan perkhidmatan $1 sistem untuk penyegerakan -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. error_serviceunknown=Perkhidmatan tidak diketahui : $1 diff --git a/time/lang/mt.auto b/time/lang/mt.auto index 00238755b..8935a42fd 100644 --- a/time/lang/mt.auto +++ b/time/lang/mt.auto @@ -19,7 +19,6 @@ index_tabsync2=Mexxi s-servizz tas-sistema $1 għas-sinkronizzazzjoni index_desctime=Din il-formola hija għall-bidla tal-ħin kurrenti tas-sistema, li tintuża mill-proċessi kollha li jmexxu. Fuq sistemi operattivi li għandhom arloġġ tal-ħardwer separat, jista 'jintuża wkoll biex tissettja dan. index_desczone=Din il-formola jippermettilek tissettja ż-żona tal-ħin awtomatika tas-sistema, li tintuża biex tikkonverti l-ħin tas-sistema f'format li jinqara mill-bniedem u tikkumpensa. index_descsync=Din il-formola hija għall-konfigurazzjoni tas-sistema biex tissinkronizza awtomatikament il-ħin ma 'server remot. Is-sinkronizzazzjoni se ssir bl-użu tal-protokoll Unix time jew NTP, skond liema kmandi huma installati u dak li jappoġġja s-sistema remota. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Issejvja action_apply=Applika diff --git a/time/lang/nl.auto b/time/lang/nl.auto index 7f3dc499d..ba148f376 100644 --- a/time/lang/nl.auto +++ b/time/lang/nl.auto @@ -1,5 +1,4 @@ index_serviceonboot=Ja, en begin bij het opstarten index_tabsync2=Voer de systeemservice $1 uit voor synchronisatie -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. error_serviceunknown=Onbekende dienst : $1 diff --git a/time/lang/no.auto b/time/lang/no.auto index fd350c7e3..20159c075 100644 --- a/time/lang/no.auto +++ b/time/lang/no.auto @@ -1,5 +1,4 @@ index_serviceonboot=Ja, og start ved oppstart index_tabsync2=Kjør systemtjenesten $1 for synkronisering -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. error_serviceunknown=Ukjent tjeneste : $1 diff --git a/time/lang/pl.auto b/time/lang/pl.auto index c4293fcd9..203ce2bed 100644 --- a/time/lang/pl.auto +++ b/time/lang/pl.auto @@ -1,5 +1,4 @@ index_serviceonboot=Tak i zacznij od rozruchu index_tabsync2=Uruchom usługę systemową $1 w celu synchronizacji -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. error_serviceunknown=Nieznana usługa : $1 diff --git a/time/lang/pt.auto b/time/lang/pt.auto index 7b43dbb2c..d064ddcf2 100644 --- a/time/lang/pt.auto +++ b/time/lang/pt.auto @@ -19,7 +19,6 @@ index_tabsync2=Execute o serviço $1 do sistema para sincronização index_desctime=Este formulário é para alterar a hora atual do sistema, que é usada por todos os processos em execução. Em sistemas operacionais que possuem um relógio de hardware separado, também pode ser usado para definir isso. index_desczone=Este formulário permite definir o fuso horário padrão do sistema, usado para converter a hora do sistema em um formato e deslocamento legível por humanos. index_descsync=Este formulário é para configurar o sistema para sincronizar automaticamente a hora com um servidor remoto. A sincronização será feita usando o protocolo time ou NTP do Unix, dependendo de quais comandos estão instalados e de que suporte o sistema remoto. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Salve  action_apply=Aplique diff --git a/time/lang/pt_BR.auto b/time/lang/pt_BR.auto index 64cdf73f7..c8c3c96f0 100644 --- a/time/lang/pt_BR.auto +++ b/time/lang/pt_BR.auto @@ -1,6 +1,5 @@ index_serviceonboot=Sim, e comece na inicialização index_boot=Sincronizar quando o Webmin é iniciado? index_tabsync2=Execute o serviço $1 do sistema para sincronização -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. error_serviceunknown=Serviço desconhecido : $1 diff --git a/time/lang/ro.auto b/time/lang/ro.auto index d7753804e..84dd62b9a 100644 --- a/time/lang/ro.auto +++ b/time/lang/ro.auto @@ -19,7 +19,6 @@ index_tabsync2=Rulați serviciul de sistem $1 pentru sincronizare index_desctime=Acest formular este pentru a schimba ora curentă a sistemului, care este utilizat de toate procesele de rulare. La sistemele de operare care au un ceas hardware separat, poate fi folosit și pentru a seta acest lucru. index_desczone=Acest formular vă permite să setați fusul orar implicit al sistemului, care este utilizat pentru a converti ora sistemului într-un format cititor și compensat. index_descsync=Acest formular este pentru configurarea sistemului pentru a sincroniza automat ora cu un server de la distanță. Sincronizarea se va face folosind protocolul Unix time sau NTP, în funcție de comenzile instalate și de ce suportă sistemul de la distanță. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=salva action_apply=aplica diff --git a/time/lang/ru.auto b/time/lang/ru.auto index a7c4a0883..84258f350 100644 --- a/time/lang/ru.auto +++ b/time/lang/ru.auto @@ -1,6 +1,5 @@ index_serviceonboot=Да, и начать при загрузке index_boot=Синхронизировать при запуске Webmin? index_tabsync2=Запустите системную службу $1 для синхронизации -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. error_serviceunknown=Неизвестная служба : $1 diff --git a/time/lang/sk.auto b/time/lang/sk.auto index 97a3c3460..ca55baa76 100644 --- a/time/lang/sk.auto +++ b/time/lang/sk.auto @@ -8,7 +8,6 @@ index_tabsync2=Spustite systémovú službu $1 na synchronizáciu index_desctime=Tento formulár slúži na zmenu aktuálneho času systému, ktorý používajú všetky spustené procesy. Na operačných systémoch, ktoré majú samostatné hardvérové hodiny, sa dá tiež použiť na nastavenie. index_desczone=Tento formulár vám umožňuje nastaviť predvolené časové pásmo systému, ktoré sa používa na prevod systémového času na formát čitateľný pre človeka a ofset. index_descsync=Tento formulár slúži na konfiguráciu systému na automatickú synchronizáciu času so vzdialeným serverom. Synchronizácia sa vykoná pomocou protokolu Unix time alebo NTP, v závislosti od toho, ktoré príkazy sú nainštalované a čo vzdialený systém podporuje. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. minute=minúta second=druhý diff --git a/time/lang/sl.auto b/time/lang/sl.auto index e5bdeeb11..a7e916f9e 100644 --- a/time/lang/sl.auto +++ b/time/lang/sl.auto @@ -19,7 +19,6 @@ index_tabsync2=Zaženite sistemsko storitev $1 za sinhronizacijo index_desctime=Ta obrazec je namenjen spreminjanju trenutnega časa sistema, ki ga uporabljajo vsi tekoči procesi. V operacijskih sistemih, ki imajo ločeno strojno uro, ga lahko uporabite tudi za nastavitev. index_desczone=Ta obrazec vam omogoča, da nastavite privzeti časovni pas sistema, ki se uporablja za pretvorbo sistemskega časa v človeško berljiv format in odmik. index_descsync=Ta obrazec je namenjen konfiguriranju sistema za samodejno sinhronizacijo časa z oddaljenim strežnikom. Sinhronizacija bo izvedena s protokolom Unix time ali NTP, odvisno od tega, kateri ukazi so nameščeni in kaj oddaljeni sistem podpira. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Shrani action_apply=Prijavite se diff --git a/time/lang/sv.auto b/time/lang/sv.auto index 73fa52b07..548e2393a 100644 --- a/time/lang/sv.auto +++ b/time/lang/sv.auto @@ -15,7 +15,6 @@ index_tabsync2=Kör systemtjänsten $1 för synkronisering index_desctime=Detta formulär är för att ändra systemets nuvarande tid, som används av alla processer som körs. På operativsystem som har en separat hårdvaruklocka kan den också användas för att ställa in det. index_desczone=Detta formulär låter dig ställa in systemets standardtidszon, som används för att konvertera systemtiden till ett mänskligt läsbart format och offset. index_descsync=Detta formulär är för att konfigurera systemet för att automatiskt synkronisera tiden med en fjärrserver. Synkroniseringen görs med Unix time -protokollet eller NTP, beroende på vilka kommandon som är installerade och vad fjärrsystemet stöder. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. acl_timezone=Användaren kan ställa in tidszon? acl_ntp=Kan synkroniseras med tidsserver? diff --git a/time/lang/th.auto b/time/lang/th.auto index 49c60876a..5af92bff7 100644 --- a/time/lang/th.auto +++ b/time/lang/th.auto @@ -19,7 +19,6 @@ index_tabsync2=เรียกใช้บริการระบบ $1time หรือ NTP ขึ้นอยู่กับคำสั่งที่ติดตั้งและสิ่งที่ระบบรีโมตสนับสนุน -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=บันทึก action_apply=ใช้ diff --git a/time/lang/tr.auto b/time/lang/tr.auto index 7ed724636..a601a7483 100644 --- a/time/lang/tr.auto +++ b/time/lang/tr.auto @@ -8,7 +8,6 @@ index_tabsync2=Senkronizasyon için sistem $1 hizmetini çalıştırın index_desctime=Bu form, sistemin çalışan tüm işlemler tarafından kullanılan geçerli saatini değiştirmek içindir. Ayrı bir donanım saatine sahip işletim sistemlerinde, bunu ayarlamak için de kullanılabilir. index_desczone=Bu form, sistemin saatini insan tarafından okunabilen bir biçime ve ofsete dönüştürmek için kullanılan varsayılan saat dilimini ayarlamanızı sağlar. index_descsync=Bu form, sistemi zamanı uzak bir sunucuyla otomatik olarak senkronize edecek şekilde yapılandırmak içindir. Senkronizasyon, hangi komutların kurulu olduğuna ve uzak sistemin neleri desteklediğine bağlı olarak Unix zaman protokolü veya NTP kullanılarak yapılacaktır. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. acl_ntp=Zaman sunucusuyla senkronize edilebilir mi? acl_nontp=Zaman sunucusuyla senkronizasyon yapmanıza izin verilmiyor diff --git a/time/lang/uk.auto b/time/lang/uk.auto index 4ff914e63..4c4872fff 100644 --- a/time/lang/uk.auto +++ b/time/lang/uk.auto @@ -9,7 +9,6 @@ index_tabsync2=Запустіть системну службу $1 дл index_desctime=Ця форма призначена для зміни поточного часу системи, яка використовується всіма запущеними процесами. В операційних системах, які мають окремий апаратний годинник, його можна також встановити. index_desczone=Ця форма дозволяє встановити часовий пояс системи за замовчуванням, який використовується для перетворення системного часу у читаний людиною формат і зміщення. index_descsync=Ця форма призначена для налаштування системи для автоматичної синхронізації часу з віддаленим сервером. Синхронізація буде здійснюватися за допомогою протоколу Unix time або NTP, залежно від того, які команди встановлені та що підтримує віддалена система. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. acl_timezone=Користувач може встановити часовий пояс? acl_ntp=Чи можете синхронізуватися з сервером часу? diff --git a/time/lang/ur.auto b/time/lang/ur.auto index 2852316a3..1036aa94f 100644 --- a/time/lang/ur.auto +++ b/time/lang/ur.auto @@ -19,7 +19,6 @@ index_tabsync2=Run system $1 service for synchronization index_desctime=یہ فارم نظام کے موجودہ وقت کو تبدیل کرنے کے لئے ہے ، جو تمام چلنے والے عمل کے ذریعہ استعمال ہوتا ہے۔ آپریٹنگ سسٹم پر جن کی ایک الگ ہارڈویئر گھڑی ہے ، اسے بھی سیٹ کرنے کے لئے استعمال کیا جاسکتا ہے۔ index_desczone=یہ فارم آپ کو سسٹم کا ڈیفالٹ ٹائم زون متعین کرنے کی اجازت دیتا ہے ، جو سسٹم ٹائم کو انسان کو پڑھنے کے قابل فارمیٹ اور آفسیٹ میں تبدیل کرنے کے لئے استعمال ہوتا ہے۔ index_descsync=This form is for configuring the system to automatically synchronize the time with a remote server. Synchronization will be done using the Unix time protocol or NTP, depending on which commands are installed and what the remote system supports. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=محفوظ کریں action_apply=درخواست دیں diff --git a/time/lang/vi.auto b/time/lang/vi.auto index 7a94ca26d..6cfaf14c7 100644 --- a/time/lang/vi.auto +++ b/time/lang/vi.auto @@ -19,7 +19,6 @@ index_tabsync2=Chạy dịch vụ $1 hệ thống để đồng bộ h index_desctime=Biểu mẫu này là để thay đổi thời gian hiện tại của hệ thống, được sử dụng bởi tất cả các quy trình đang chạy. Trên các hệ điều hành có đồng hồ phần cứng riêng, nó cũng có thể được sử dụng để đặt điều đó. index_desczone=Biểu mẫu này cho phép bạn đặt múi giờ mặc định của hệ thống, được sử dụng để chuyển đổi thời gian hệ thống sang định dạng và phần bù có thể đọc được của con người. index_descsync=Hình thức này là để cấu hình hệ thống để tự động đồng bộ hóa thời gian với một máy chủ từ xa. Đồng bộ hóa sẽ được thực hiện bằng giao thức time Unix hoặc NTP, tùy thuộc vào lệnh nào được cài đặt và hệ thống từ xa hỗ trợ gì. -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. action_save=Tiết kiệm action_apply=Ứng dụng diff --git a/time/lang/zh.auto b/time/lang/zh.auto index 095ff125e..736515e21 100644 --- a/time/lang/zh.auto +++ b/time/lang/zh.auto @@ -15,7 +15,6 @@ index_tabsync2=运行系统 $1 服务进行同步 index_desctime=该表格用于更改系统的当前时间，所有正在运行的进程都将使用该时间。在具有独立硬件时钟的操作系统上，也可以使用该时钟进行设置。 index_desczone=该表格允许您设置系统的默认时区，该默认时区用于将系统时间转换为人类可读的格式和偏移量。 index_descsync=该表格用于将系统配置为自动与远程服务器同步时间。同步将使用Unix time协议或NTP完成，具体取决于安装了哪些命令以及远程系统支持什么。 -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. acl_timezone=用户可以设置时区吗？ acl_ntp=可以与时间服务器同步吗？ diff --git a/time/lang/zh_TW.auto b/time/lang/zh_TW.auto index 92b2836d4..2861a581d 100644 --- a/time/lang/zh_TW.auto +++ b/time/lang/zh_TW.auto @@ -10,7 +10,6 @@ index_tabsync2=運行系統 $1 服務進行同步 index_desctime=該表格用於更改系統的當前時間，所有正在運行的進程都將使用該時間。在具有獨立硬件時鐘的操作系統上，也可以使用該時鐘進行設置。 index_desczone=該表格允許您設置系統的默認時區，該默認時區用於將系統時間轉換為人類可讀的格式和偏移量。 index_descsync=該表格用於將系統配置為自動與遠程服務器同步時間。同步將使用Unix time協議或NTP完成，具體取決於安裝了哪些命令以及遠程系統支持什麼。 -index_ctrl=Note: Ctrl-click (or command-click on the Mac) to select and de-select minutes, hours, days and months. acl_timezone=用戶可以設置時區嗎？ acl_ntp=可以與時間服務器同步嗎？ diff --git a/tunnel/lang/de b/tunnel/lang/de index 0c8242464..48bbb9648 100644 --- a/tunnel/lang/de +++ b/tunnel/lang/de @@ -18,4 +18,4 @@ login_login=Anmelden login_clear=Löschen seturl_err=Fehler beim Öffnen der URL -seturl_eurl=Ungültige URL eingegeben +seturl_eurl=Ungültige URL eingegeben \ No newline at end of file diff --git a/tunnel/lang/zh b/tunnel/lang/zh index d4bcf2f06..d84dfe113 100644 --- a/tunnel/lang/zh +++ b/tunnel/lang/zh @@ -19,3 +19,5 @@ login_clear=清除 seturl_err=URL网址打开失败 seturl_eurl=输入的URL网址无效 + +__norefs=1 diff --git a/updown/lang/af.auto b/updown/lang/af.auto index 4ee3021c5..58e78c775 100644 --- a/updown/lang/af.auto +++ b/updown/lang/af.auto @@ -42,9 +42,7 @@ index_emailto=Ja, om aan te spreek index_email2=Stuur e-pos as die oplaai gedoen is? upload_title=Laai lêers op -upload_direct=Write files directly to disk? upload_err=Kon nie lêers oplaai nie -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Gids ontbreek om na op te laai upload_euser=Gebruikernaam ontbreek of ongeldig upload_egroup=Groepnaam ontbreek of ongeldig diff --git a/updown/lang/ar.auto b/updown/lang/ar.auto index 3c6ec6c16..707ef432e 100644 --- a/updown/lang/ar.auto +++ b/updown/lang/ar.auto @@ -42,9 +42,7 @@ index_emailto=نعم ، للتصدي index_email2=إرسال بريد إلكتروني عند الانتهاء من التحميلات؟ upload_title=تحميل الملفات -upload_direct=Write files directly to disk? upload_err=فشل تحميل الملفات -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=دليل مفقود للتحميل upload_euser=اسم المستخدم مفقود أو غير صالح upload_egroup=اسم مجموعة مفقود أو غير صالح diff --git a/updown/lang/be.auto b/updown/lang/be.auto index 186d5c87e..5569f1f18 100644 --- a/updown/lang/be.auto +++ b/updown/lang/be.auto @@ -42,9 +42,7 @@ index_emailto=Так, на адрас index_email2=Адправіць электронную пошту, калі загрузка будзе зроблена? upload_title=Загрузіць файлы -upload_direct=Write files directly to disk? upload_err=Не атрымалася загрузіць файлы -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Адсутны каталог для загрузкі upload_euser=Адсутнічае альбо недапушчальнае імя карыстальніка upload_egroup=Адсутнічае альбо недапушчальнае імя групы diff --git a/updown/lang/bg.auto b/updown/lang/bg.auto index 00f87d097..4be7135e0 100644 --- a/updown/lang/bg.auto +++ b/updown/lang/bg.auto @@ -42,9 +42,7 @@ index_emailto=Да, за адрес index_email2=Изпращате имейл, когато качването е извършено? upload_title=Качване на файлове -upload_direct=Write files directly to disk? upload_err=Качването на файлове не бе успешно -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Липсва директория за качване в upload_euser=Липсващо или невалидно потребителско име upload_egroup=Липсващо или невалидно име на групата diff --git a/updown/lang/ca.auto b/updown/lang/ca.auto deleted file mode 100644 index 7eb6cc20a..000000000 --- a/updown/lang/ca.auto +++ /dev/null @@ -1,2 +0,0 @@ -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 diff --git a/updown/lang/cs.auto b/updown/lang/cs.auto index 48222a0f6..79280a9fc 100644 --- a/updown/lang/cs.auto +++ b/updown/lang/cs.auto @@ -42,9 +42,7 @@ index_emailto=Ano, na adresu index_email2=Po odeslání odeslat e-mail? upload_title=Nahrát soubory -upload_direct=Write files directly to disk? upload_err=Nahrání souborů se nezdařilo -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Chybí adresář, do kterého se má nahrát upload_euser=Chybějící nebo neplatné uživatelské jméno upload_egroup=Chybějící nebo neplatný název skupiny diff --git a/updown/lang/da.auto b/updown/lang/da.auto index c38d72264..89f34fced 100644 --- a/updown/lang/da.auto +++ b/updown/lang/da.auto @@ -42,9 +42,7 @@ index_emailto=Ja, til adresse index_email2=Vil du sende e-mail, når uploads er færdig? upload_title=Upload filer -upload_direct=Write files directly to disk? upload_err=Kunne ikke uploade filer -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Manglende mappe, der skal uploades til upload_euser=Manglende eller ugyldigt brugernavn upload_egroup=Manglende eller ugyldigt gruppenavn diff --git a/updown/lang/de b/updown/lang/de index 6da9914ae..4234a51fb 100644 --- a/updown/lang/de +++ b/updown/lang/de @@ -133,4 +133,4 @@ email_uppath=Zieldateiname: $1 email_upsize=Hochgeladene Größe: $1 email_upextract=Extraktionsstatus: $1 email_subjectu=Upload abgeschlossen -email_upmsg=Die folgenden Uploads wurden abgeschlossen : +email_upmsg=Die folgenden Uploads wurden abgeschlossen : \ No newline at end of file diff --git a/updown/lang/el.auto b/updown/lang/el.auto index ea18eda6e..6e1fe1c3b 100644 --- a/updown/lang/el.auto +++ b/updown/lang/el.auto @@ -42,9 +42,7 @@ index_emailto=Ναι, για την αντιμετώπιση index_email2=Αποστολή μηνύματος ηλεκτρονικού ταχυδρομείου όταν οι μεταφορτώσεις έχουν ολοκληρωθεί; upload_title=Μεταφόρτωση αρχείων -upload_direct=Write files directly to disk? upload_err=Αποτυχία φόρτωσης αρχείων -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Λείπει ο κατάλογος για να ανεβάσετε στο upload_euser=Λείπει ή μη έγκυρο όνομα χρήστη upload_egroup=Λείπει ή μη έγκυρο όνομα ομάδας diff --git a/updown/lang/es.auto b/updown/lang/es.auto index c5d8a09ad..67514afd0 100644 --- a/updown/lang/es.auto +++ b/updown/lang/es.auto @@ -8,8 +8,6 @@ index_email=¿Enviar correo electrónico cuando se realizan las descargas? index_emailto=Sí, para abordar index_email2=¿Enviar correo electrónico cuando se realizan las cargas? -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 upload_eemail=Falta la dirección de correo electrónico para notificar upload_saving=Guardando el archivo $1 .. upload_saved=.. escribió $1 diff --git a/updown/lang/eu.auto b/updown/lang/eu.auto index 56f9fcffa..395070afd 100644 --- a/updown/lang/eu.auto +++ b/updown/lang/eu.auto @@ -42,9 +42,7 @@ index_emailto=Bai, helbidera index_email2=Bidali mezu elektronikoak noiz igotzen direnean? upload_title=Kargatu fitxategiak -upload_direct=Write files directly to disk? upload_err=Ezin izan da fitxategiak kargatu -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Direktorioa falta da kargatzeko upload_euser=Erabiltzaile-izena falta edo baliogabea upload_egroup=Talde izen falta edo baliogabea diff --git a/updown/lang/fa.auto b/updown/lang/fa.auto index d666afcaf..ac939181a 100644 --- a/updown/lang/fa.auto +++ b/updown/lang/fa.auto @@ -42,9 +42,7 @@ index_emailto=بله ، برای پرداختن index_email2=وقتی بارگذاری انجام شد ایمیل ارسال کنید؟ upload_title=بارگذاری پرونده ها -upload_direct=Write files directly to disk? upload_err=بارگذاری پرونده ها انجام نشد -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=فهرست برای بارگذاری در وجود ندارد upload_euser=نام کاربری موجود نیست یا نامعتبر است upload_egroup=نام گروه نامعتبر است یا نامعتبر است diff --git a/updown/lang/fi.auto b/updown/lang/fi.auto index a742464f6..8859147c9 100644 --- a/updown/lang/fi.auto +++ b/updown/lang/fi.auto @@ -8,8 +8,6 @@ index_email=Lähetä sähköpostia, kun lataus on valmis? index_emailto=Kyllä, osoitteeseen index_email2=Lähetä sähköpostia, kun lataus on valmis? -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 upload_eemail=Puuttuu ilmoitettava sähköpostiosoite upload_saving=Tallennetaan tiedosto $1 .. upload_saved=.. kirjoitti $1 diff --git a/updown/lang/fr.auto b/updown/lang/fr.auto deleted file mode 100644 index 7eb6cc20a..000000000 --- a/updown/lang/fr.auto +++ /dev/null @@ -1,2 +0,0 @@ -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 diff --git a/updown/lang/he.auto b/updown/lang/he.auto index 859c1518d..33e29c2fd 100644 --- a/updown/lang/he.auto +++ b/updown/lang/he.auto @@ -42,9 +42,7 @@ index_emailto=כן, לכתובת index_email2=לשלוח דוא"ל בסיום ההעלאה? upload_title=העלה קבצים -upload_direct=Write files directly to disk? upload_err=העלאת קבצים נכשלה -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=מדריך חסר לטעינה אליו upload_euser=שם משתמש חסר או לא חוקי upload_egroup=שם קבוצה חסר או לא חוקי diff --git a/updown/lang/hr.auto b/updown/lang/hr.auto index 3c186e0c1..90ccc7a02 100644 --- a/updown/lang/hr.auto +++ b/updown/lang/hr.auto @@ -42,9 +42,7 @@ index_emailto=Da, na adresu index_email2=Šaljite e-poštu kada se izvrše prijenosi? upload_title=Prijenos datoteka -upload_direct=Write files directly to disk? upload_err=Prijenos datoteka nije uspio -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Nedostaje direktorij za učitavanje u upload_euser=Nedostaje ili nije valjano korisničko ime upload_egroup=Nedostaje ili nevažeće ime grupe diff --git a/updown/lang/hu.auto b/updown/lang/hu.auto index c7bf35f57..81a93f558 100644 --- a/updown/lang/hu.auto +++ b/updown/lang/hu.auto @@ -1,8 +1,5 @@ index_descdownload=Ez az űrlap lehetővé teszi fájlok vagy weboldalak letöltését a HTTP vagy FTP URL-ekből a Webmin futtató rendszerbe. A letöltés azonnal elvégezhető, vagy a jövőben egy bizonyos időre tervezhető. -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 - download_enone=Nincs megadva letölthető URL fetch_ezip=A könyvtárat csak akkor lehet letölteni, ha a zip parancs telepítve van diff --git a/updown/lang/it.auto b/updown/lang/it.auto deleted file mode 100644 index 7eb6cc20a..000000000 --- a/updown/lang/it.auto +++ /dev/null @@ -1,2 +0,0 @@ -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 diff --git a/updown/lang/ja.auto b/updown/lang/ja.auto index 176fee94e..3dff1de8f 100644 --- a/updown/lang/ja.auto +++ b/updown/lang/ja.auto @@ -42,9 +42,7 @@ index_emailto=はい、対処します index_email2=アップロードが完了したらメールを送信しますか？ upload_title=ファイルをアップロードする -upload_direct=Write files directly to disk? upload_err=ファイルをアップロードできませんでした -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=アップロード先のディレクトリがありません upload_euser=ユーザー名がないか無効です upload_egroup=グループ名が欠落しているか無効です diff --git a/updown/lang/ko.auto b/updown/lang/ko.auto index 597a3171b..326fea39e 100644 --- a/updown/lang/ko.auto +++ b/updown/lang/ko.auto @@ -2,8 +2,6 @@ index_email=다운로드가 완료되면 이메일을 보내시겠습니까? index_emailto=그렇습니다 index_email2=업로드가 완료되면 이메일을 보내시겠습니까? -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 upload_eemail=통지 할 이메일 주소가 없습니다. upload_saving=파일 $1 저장 중 .. upload_saved=.. 쓴 $1 diff --git a/updown/lang/lt.auto b/updown/lang/lt.auto index 7db25d2d1..5ecbf713b 100644 --- a/updown/lang/lt.auto +++ b/updown/lang/lt.auto @@ -42,9 +42,7 @@ index_emailto=Taip, kreiptis index_email2=Siųsti el. Laišką, kai įkelta? upload_title=Įkelti failus -upload_direct=Write files directly to disk? upload_err=Nepavyko įkelti failų -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Trūksta katalogo, į kurį būtų galima įkelti upload_euser=Trūksta arba netinkamas vartotojo vardas upload_egroup=Trūksta arba netinkamas grupės pavadinimas diff --git a/updown/lang/lv.auto b/updown/lang/lv.auto index 5c7b409d9..af617be15 100644 --- a/updown/lang/lv.auto +++ b/updown/lang/lv.auto @@ -42,9 +42,7 @@ index_emailto=Jā, lai uzrunātu index_email2=Vai sūtīt e-pastu, kad augšupielāde ir pabeigta? upload_title=Augšupielādēt failus -upload_direct=Write files directly to disk? upload_err=Neizdevās augšupielādēt failus -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Trūkst direktorija, kurā augšupielādēt upload_euser=Trūkst vai nav derīgs lietotājvārds upload_egroup=Trūkst vai nav derīgs grupas nosaukums diff --git a/updown/lang/ms.auto b/updown/lang/ms.auto deleted file mode 100644 index 7eb6cc20a..000000000 --- a/updown/lang/ms.auto +++ /dev/null @@ -1,2 +0,0 @@ -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 diff --git a/updown/lang/mt.auto b/updown/lang/mt.auto index 3c8684430..2aee2d626 100644 --- a/updown/lang/mt.auto +++ b/updown/lang/mt.auto @@ -42,9 +42,7 @@ index_emailto=Iva, biex tindirizza index_email2=Ibgħat imejl meta l-uploads isiru? upload_title=Itella 'l-Fajls -upload_direct=Write files directly to disk? upload_err=Ma rnexxielux itella 'l-fajls -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Nieqes id-direttorju biex ittella 'għalih upload_euser=Username nieqes jew invalidu upload_egroup=Isem tal-grupp nieqes jew invalidu diff --git a/updown/lang/nl.auto b/updown/lang/nl.auto deleted file mode 100644 index 7eb6cc20a..000000000 --- a/updown/lang/nl.auto +++ /dev/null @@ -1,2 +0,0 @@ -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 diff --git a/updown/lang/no.auto b/updown/lang/no.auto deleted file mode 100644 index 7eb6cc20a..000000000 --- a/updown/lang/no.auto +++ /dev/null @@ -1,2 +0,0 @@ -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 diff --git a/updown/lang/pl.auto b/updown/lang/pl.auto deleted file mode 100644 index 7eb6cc20a..000000000 --- a/updown/lang/pl.auto +++ /dev/null @@ -1,2 +0,0 @@ -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 diff --git a/updown/lang/pt.auto b/updown/lang/pt.auto index e5aff4b3e..d7997f647 100644 --- a/updown/lang/pt.auto +++ b/updown/lang/pt.auto @@ -42,9 +42,7 @@ index_emailto=Sim, para endereçar index_email2=Enviar email quando os uploads forem concluídos? upload_title=Fazer upload de arquivos -upload_direct=Write files directly to disk? upload_err=Falha ao fazer upload de arquivos -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Diretório ausente para upload upload_euser=Nome de usuário ausente ou inválido upload_egroup=Nome de grupo ausente ou inválido diff --git a/updown/lang/pt_BR.auto b/updown/lang/pt_BR.auto index e5aff4b3e..d7997f647 100644 --- a/updown/lang/pt_BR.auto +++ b/updown/lang/pt_BR.auto @@ -42,9 +42,7 @@ index_emailto=Sim, para endereçar index_email2=Enviar email quando os uploads forem concluídos? upload_title=Fazer upload de arquivos -upload_direct=Write files directly to disk? upload_err=Falha ao fazer upload de arquivos -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Diretório ausente para upload upload_euser=Nome de usuário ausente ou inválido upload_egroup=Nome de grupo ausente ou inválido diff --git a/updown/lang/ro.auto b/updown/lang/ro.auto index 82c5e58b3..e6efaf22d 100644 --- a/updown/lang/ro.auto +++ b/updown/lang/ro.auto @@ -42,9 +42,7 @@ index_emailto=Da, să mă adresez index_email2=Trimiteți e-mail atunci când încărcările sunt terminate? upload_title=Încărca fișiere -upload_direct=Write files directly to disk? upload_err=Nu a putut încărca fișierele -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Lipsește directorul pentru încărcare upload_euser=Nume de utilizator lipsă sau nevalid upload_egroup=Numele grupului lipsă sau nevalid diff --git a/updown/lang/ru.auto b/updown/lang/ru.auto index ee5961a31..e042bfcce 100644 --- a/updown/lang/ru.auto +++ b/updown/lang/ru.auto @@ -12,8 +12,6 @@ index_email=Отправить письмо, когда загрузка буд index_emailto=Да, по адресу index_email2=Отправить письмо, когда загрузка будет завершена? -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 upload_eemail=Отсутствует адрес электронной почты для уведомления upload_saving=Сохранение файла $1 .. upload_saved=.. написал $1 diff --git a/updown/lang/sk.auto b/updown/lang/sk.auto index 327274d2b..0dce50fa4 100644 --- a/updown/lang/sk.auto +++ b/updown/lang/sk.auto @@ -8,8 +8,6 @@ index_email=Poslať e-mail po dokončení sťahovania? index_emailto=Áno, na adresu index_email2=Poslať e-mail po dokončení nahrávania? -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 upload_eemail=Chýba e-mailová adresa na upozornenie upload_saving=Ukladá sa súbor $1 .. upload_saved=.. napísal $1 diff --git a/updown/lang/sl.auto b/updown/lang/sl.auto index 68ddbe271..ac900f02d 100644 --- a/updown/lang/sl.auto +++ b/updown/lang/sl.auto @@ -42,9 +42,7 @@ index_emailto=Da, na naslov index_email2=Pošljite e-pošto, ko je prenos naložen? upload_title=Naloži datoteke -upload_direct=Write files directly to disk? upload_err=Ni bilo mogoče naložiti datotek -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Manjkajoči imenik za nalaganje upload_euser=Manjkajoče ali neveljavno uporabniško ime upload_egroup=Manjkajoče ali neveljavno ime skupine diff --git a/updown/lang/sv.auto b/updown/lang/sv.auto index 61772466c..b5465db3c 100644 --- a/updown/lang/sv.auto +++ b/updown/lang/sv.auto @@ -42,9 +42,7 @@ index_emailto=Ja, att adressera index_email2=Skicka e-post när uppladdningarna är gjorda? upload_title=Ladda upp filer -upload_direct=Write files directly to disk? upload_err=Det gick inte att ladda upp filer -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Saknas katalog att ladda upp till upload_euser=Saknat eller ogiltigt användarnamn upload_egroup=Gruppnamn saknas eller ogiltigt diff --git a/updown/lang/th.auto b/updown/lang/th.auto index ada5e2f5d..8fcbe9ff6 100644 --- a/updown/lang/th.auto +++ b/updown/lang/th.auto @@ -42,9 +42,7 @@ index_emailto=ใช่ไปยังที่อยู่ index_email2=ส่งอีเมลเมื่ออัพโหลดเสร็จแล้ว? upload_title=อัพโหลดไฟล์ -upload_direct=Write files directly to disk? upload_err=การอัพโหลดไฟล์ล้มเหลว -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=ไม่มีไดเรกทอรีที่จะอัปโหลดไป upload_euser=ชื่อผู้ใช้ที่ขาดหายไปหรือไม่ถูกต้อง upload_egroup=ชื่อกลุ่มที่ขาดหายไปหรือไม่ถูกต้อง diff --git a/updown/lang/tr.auto b/updown/lang/tr.auto index d86919f84..0d84f1b1a 100644 --- a/updown/lang/tr.auto +++ b/updown/lang/tr.auto @@ -12,8 +12,6 @@ index_email=İndirme işlemi tamamlandığında e-posta gönderilsin mi? index_emailto=Evet, adreslemek index_email2=Yüklemeler tamamlandığında e-posta gönderilsin mi? -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 upload_eemail=Bildirilecek e-posta adresi eksik upload_saving=$1 dosyası kaydediliyor .. upload_saved=.. $1 yazdı diff --git a/updown/lang/uk.auto b/updown/lang/uk.auto index bf4eb9c05..3b3186b57 100644 --- a/updown/lang/uk.auto +++ b/updown/lang/uk.auto @@ -12,8 +12,6 @@ index_email=Надіслати електронний лист після зав index_emailto=Так, на адресу index_email2=Надіслати електронний лист після завантаження? -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 upload_eemail=Відсутня електронна адреса для сповіщення upload_saving=Збереження файлу $1 .. upload_saved=.. написав $1 diff --git a/updown/lang/ur.auto b/updown/lang/ur.auto index 828fdfb41..471690f4c 100644 --- a/updown/lang/ur.auto +++ b/updown/lang/ur.auto @@ -42,9 +42,7 @@ index_emailto=ہاں ، مخاطب کرنا index_email2=جب اپ لوڈ ہو جائیں تو ای میل بھیجیں؟ upload_title=فائلیں اپ لوڈ کرو -upload_direct=Write files directly to disk? upload_err=فائلیں اپ لوڈ کرنے میں ناکام -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=اپ لوڈ کرنے کیلئے ڈائرکٹری غائب ہے upload_euser=غائب یا غلط صارف نام upload_egroup=گروپ کا نام غائب یا غلط diff --git a/updown/lang/vi.auto b/updown/lang/vi.auto index 8cf7a82b3..1e6c98f16 100644 --- a/updown/lang/vi.auto +++ b/updown/lang/vi.auto @@ -42,9 +42,7 @@ index_emailto=Vâng, đến địa chỉ index_email2=Gửi email khi tải lên xong? upload_title=Tải lên tập tin -upload_direct=Write files directly to disk? upload_err=Không thể tải lên tập tin -upload_emove=Failed to move uploaded file from $1 to $2 upload_edir=Thiếu thư mục để tải lên upload_euser=Tên người dùng bị thiếu hoặc không hợp lệ upload_egroup=Tên nhóm bị thiếu hoặc không hợp lệ diff --git a/updown/lang/zh b/updown/lang/zh index 418bc52d1..b9ce35b3f 100644 --- a/updown/lang/zh +++ b/updown/lang/zh @@ -134,3 +134,4 @@ email_upsize=上传大小: $1 email_upextract=提取状态: $1 email_subjectu=上传完成 email_upmsg=以下上传已完成 : +__norefs=1 diff --git a/updown/lang/zh_TW.auto b/updown/lang/zh_TW.auto index 9e1690f08..3e0f12632 100644 --- a/updown/lang/zh_TW.auto +++ b/updown/lang/zh_TW.auto @@ -14,8 +14,6 @@ index_email=完成下載後發送電子郵件嗎？ index_emailto=是的，解決 index_email2=上傳完成後發送電子郵件嗎？ -upload_direct=Write files directly to disk? -upload_emove=Failed to move uploaded file from $1 to $2 upload_ecmd=缺少命令 $1 upload_eextract=，無法提取： $1 upload_extracted=，並提取文件 .. diff --git a/useradmin/lang/de b/useradmin/lang/de index 234e51cae..bec439d74 100644 --- a/useradmin/lang/de +++ b/useradmin/lang/de @@ -544,4 +544,4 @@ gbatch_enogroup=Gruppe existiert nicht in Zeile $1 : $2 gbatch_eprimary=Gruppe in Zeile $1 kann nicht gelöscht werden, da sie die primäre Gruppe des Benutzers $2 ist. gbatch_egroup=Doppelter Gruppenname in Zeile $1 : $2 gbatch_egroupname=Ungültiger Gruppenname in Zeile $1 -gbatch_erename=Sie dürfen Gruppen in Zeile $1 : $2 nicht umbenennen +gbatch_erename=Sie dürfen Gruppen in Zeile $1 : $2 nicht umbenennen \ No newline at end of file diff --git a/usermin/lang/af.auto b/usermin/lang/af.auto index 568a82729..8fc268be7 100644 --- a/usermin/lang/af.auto +++ b/usermin/lang/af.auto @@ -250,12 +250,6 @@ ui_hnm1=Gasheernaam vanaf URL ui_hnm2=Domeinnaam vanaf URL ui_hnm3=Ander naam .. ui_tabs=Kategoriseer modules? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Opgradeer Usermin upgrade_title2=Installeer Usermin diff --git a/usermin/lang/ar.auto b/usermin/lang/ar.auto index 39b4fb9e0..ba5b7965c 100644 --- a/usermin/lang/ar.auto +++ b/usermin/lang/ar.auto @@ -248,12 +248,6 @@ ui_hnm1=اسم المضيف من URL ui_hnm2=اسم المجال من URL ui_hnm3=اسم آخر .. ui_tabs=تصنيف الوحدات؟ -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=ترقية Usermin upgrade_title2=تثبيت Usermin diff --git a/usermin/lang/be.auto b/usermin/lang/be.auto index 0c867f7e7..53044c976 100644 --- a/usermin/lang/be.auto +++ b/usermin/lang/be.auto @@ -250,12 +250,6 @@ ui_hnm1=Імя хаста з URL ui_hnm2=Даменнае імя з URL ui_hnm3=Іншая назва .. ui_tabs=Класіфікаваць модулі? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Абнавіць Usermin upgrade_title2=Усталюйце Usermin diff --git a/usermin/lang/bg.auto b/usermin/lang/bg.auto index 13f856ef7..4c98041cd 100644 --- a/usermin/lang/bg.auto +++ b/usermin/lang/bg.auto @@ -250,12 +250,6 @@ ui_hnm1=Име на хоста от URL ui_hnm2=Име на домейн от URL ui_hnm3=Друго име .. ui_tabs=Категоризиране на модули? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Надстройте Usermin upgrade_title2=Инсталирайте Usermin diff --git a/usermin/lang/ca.auto b/usermin/lang/ca.auto index 9027faf27..9bdda845e 100644 --- a/usermin/lang/ca.auto +++ b/usermin/lang/ca.auto @@ -1,13 +1,6 @@ lang_title=Idioma i entorn local lang_title2=Usermin Idioma i configuració regional -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system - advanced_pass_desc=Fer que la contrasenya estigui disponible per als programes Usermin? advanced_pass_help=No funciona quan l'autenticació de sessió està activada diff --git a/usermin/lang/cs.auto b/usermin/lang/cs.auto index 38520ed8d..e515dbae4 100644 --- a/usermin/lang/cs.auto +++ b/usermin/lang/cs.auto @@ -13,12 +13,6 @@ ui_hnm0=Skutečné jméno hostitele ui_hnm1=Název hostitele z adresy URL ui_hnm2=Název domény z adresy URL ui_hnm3=Jiné jméno .. -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system log_copycert=Zkopírováno nastavení SSL z Webmin diff --git a/usermin/lang/da.auto b/usermin/lang/da.auto index 66cfd09dd..eb151767b 100644 --- a/usermin/lang/da.auto +++ b/usermin/lang/da.auto @@ -250,12 +250,6 @@ ui_hnm1=Værtsnavn fra URL ui_hnm2=Domænenavn fra URL ui_hnm3=Andet navn .. ui_tabs=Kategoriser moduler? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Opgrader Usermin upgrade_title2=Installer Usermin diff --git a/usermin/lang/de b/usermin/lang/de index e5f3cf079..c36d2baef 100644 --- a/usermin/lang/de +++ b/usermin/lang/de @@ -244,6 +244,7 @@ ui_efeedback=Fehlende Feedback-E-Mail-Adresse ui_efeedbackmail=Fehlender oder ungültiger SMTP-Server ui_feedbackhost=Hostname in der Feedback "Von:" Adresse ui_feedbackthis=Hostname des Systems +ui_hostnamemodeHostname, der in Usermin angezeigt werden soll ui_hnm0=Echter Hostname ui_hnm1=Hostname aus der URL ui_hnm2=Domainname aus der URL @@ -357,7 +358,6 @@ log_restrict_create=Beschränkung für $1 erstellt log_restrict_modify=Beschränkung für $1 geändert log_restrict_delete=Beschränkung für $1 gelöscht log_restrict_move=Beschränkung für $1 verschoben - log_all=alle Benutzer log_group=Gruppe $1 log_switch=Zu Usermin-Benutzer $1 gewechselt @@ -416,6 +416,7 @@ restrict_euser=Fehlender oder ungültiger Benutzername restrict_egroup=Fehlender oder ungültiger Gruppenname restrict_efile=Fehlende, nicht existierende oder nicht absolute Benutzer- und Gruppendatei restrict_move=Verschieben + bootup_ecannot=Sie dürfen das Booten nicht konfigurieren acl_icons=Erlaubte Konfigurationsseiten @@ -508,4 +509,4 @@ copycert_ekeyfile=Keine private Schlüsseldatei in Webmin festgelegt twofactor_desc=Die Zwei-Faktor-Authentifizierung ermöglicht es Usermin-Benutzern, die Verwendung eines zusätzlichen Authentifizierungsgeräts beim Anmelden zu aktivieren, wie z.B. eines Einmal-Passwort-Generators. Benutzer müssen sich nach der Aktivierung auf dieser Seite individuell bei dem ausgewählten Authentifizierungsanbieter registrieren. twofactor_eversion=Die Version von Usermin, die auf Ihrem System installiert ist, unterstützt keine Zwei-Faktor-Authentifizierung. -web_header=Optionen für den eingebauten Webserver von Usermin +web_header=Optionen für den eingebauten Webserver von Usermin \ No newline at end of file diff --git a/usermin/lang/de.auto b/usermin/lang/de.auto deleted file mode 100644 index 2b93ab358..000000000 --- a/usermin/lang/de.auto +++ /dev/null @@ -1 +0,0 @@ -ui_hostnamemode=Hostname to display in Usermin diff --git a/usermin/lang/el.auto b/usermin/lang/el.auto index 859dc345f..172b85dc9 100644 --- a/usermin/lang/el.auto +++ b/usermin/lang/el.auto @@ -250,12 +250,6 @@ ui_hnm1=Όνομα κεντρικού υπολογιστή από τη διεύ ui_hnm2=Όνομα τομέα από τη διεύθυνση URL ui_hnm3=Αλλο όνομα .. ui_tabs=Κατηγοριοποιήστε τις ενότητες; -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Αναβάθμιση του Usermin upgrade_title2=Εγκαταστήστε το Usermin diff --git a/usermin/lang/es.auto b/usermin/lang/es.auto index 1b5c1f480..3c818b52f 100644 --- a/usermin/lang/es.auto +++ b/usermin/lang/es.auto @@ -26,12 +26,6 @@ ui_hnm0=Nombre de host real ui_hnm1=Nombre de host de URL ui_hnm2=Nombre de dominio de URL ui_hnm3=Otro nombre .. -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_descdeb=Este formulario le permite actualizar su instalación completa de Usermin a una nueva versión actualizando su paquete Debian. Puede instalar desde un archivo.deb local, un archivo cargado o desde la última versión en www.usermin.com. Al igual que con una actualización manual, se mantendrán todos sus ajustes de configuración y módulos de terceros. diff --git a/usermin/lang/eu.auto b/usermin/lang/eu.auto index 8376d29be..d7cd40a0a 100644 --- a/usermin/lang/eu.auto +++ b/usermin/lang/eu.auto @@ -250,12 +250,6 @@ ui_hnm1=Ostalariaren izena URL-tik ui_hnm2=Domeinu izena URL batetik ui_hnm3=Beste izen bat .. ui_tabs=Moduluak sailkatu? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Erabiltzailearen bertsioa berritu upgrade_title2=Instalatu Usermin diff --git a/usermin/lang/fa.auto b/usermin/lang/fa.auto index cd260d6ba..38aaa3aeb 100644 --- a/usermin/lang/fa.auto +++ b/usermin/lang/fa.auto @@ -31,12 +31,6 @@ ui_hnm0=نام میزبان واقعی ui_hnm1=نام میزبان از URL ui_hnm2=نام دامنه از URL ui_hnm3=نام دیگر .. -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_descdeb=این فرم به شما امکان می دهد با ارتقاء بسته Debian خود ، کل نصب Usermin خود را به نسخه جدید ارتقا دهید. می توانید از یک پرونده محلی.deb ، یک پرونده بارگذاری شده یا از آخرین نسخه در www.usermin.com نصب کنید. درست مانند یک به روزرسانی دستی ، تمام تنظیمات پیکربندی و ماژول های شخص ثالث شما حفظ می شود. diff --git a/usermin/lang/fi.auto b/usermin/lang/fi.auto index 2b78f5306..e8a58861d 100644 --- a/usermin/lang/fi.auto +++ b/usermin/lang/fi.auto @@ -250,12 +250,6 @@ ui_hnm1=Isäntänimi URL-osoitteesta ui_hnm2=Verkkotunnuksen nimi URL-osoitteesta ui_hnm3=Muu nimi .. ui_tabs=Luokittele moduulit? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Päivitä Usermin upgrade_title2=Asenna Usermin diff --git a/usermin/lang/fr.auto b/usermin/lang/fr.auto index 20c3386b3..372963c63 100644 --- a/usermin/lang/fr.auto +++ b/usermin/lang/fr.auto @@ -1,13 +1,6 @@ lang_title=Langue et paramètres régionaux lang_title2=Langue et paramètres régionaux Usermin -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system - advanced_pass_desc=Rendre le mot de passe disponible pour les programmes Usermin ? advanced_pass_help=Ne fonctionne pas lorsque l'authentification de session est activée diff --git a/usermin/lang/he.auto b/usermin/lang/he.auto index fa333963d..9636d8965 100644 --- a/usermin/lang/he.auto +++ b/usermin/lang/he.auto @@ -250,12 +250,6 @@ ui_hnm1=שם מארח מכתובת האתר ui_hnm2=שם דומיין מכתובת האתר ui_hnm3=שם אחר .. ui_tabs=לסווג מודולים? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=שדרג Usermin upgrade_title2=התקן Usermin diff --git a/usermin/lang/hr.auto b/usermin/lang/hr.auto index 8fcaefc50..b0d4728e1 100644 --- a/usermin/lang/hr.auto +++ b/usermin/lang/hr.auto @@ -250,12 +250,6 @@ ui_hnm1=Naziv hosta s URL-a ui_hnm2=Naziv domene s URL-a ui_hnm3=Drugo ime .. ui_tabs=Kategorizirati module? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Nadogradite Usermin upgrade_title2=Instalirajte Usermin diff --git a/usermin/lang/hu.auto b/usermin/lang/hu.auto index 391c36005..e8f776af4 100644 --- a/usermin/lang/hu.auto +++ b/usermin/lang/hu.auto @@ -250,12 +250,6 @@ ui_hnm1=Gazdagép neve az URL-ből ui_hnm2=Domain név az URL-ből ui_hnm3=Másik név .. ui_tabs=Kategorizálja a modulokat? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Frissítse a Usermin alkalmazást upgrade_title2=Telepítse a Usermin alkalmazást diff --git a/usermin/lang/it.auto b/usermin/lang/it.auto index dab1d66c1..db87d3cde 100644 --- a/usermin/lang/it.auto +++ b/usermin/lang/it.auto @@ -13,12 +13,6 @@ ui_hnm0=Nome host reale ui_hnm1=Nome host dall'URL ui_hnm2=Nome di dominio dall'URL ui_hnm3=Altro nome .. -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system log_copycert=Impostazioni SSL copiate da Webmin diff --git a/usermin/lang/ja.auto b/usermin/lang/ja.auto index 7501e4474..6e9b59cef 100644 --- a/usermin/lang/ja.auto +++ b/usermin/lang/ja.auto @@ -75,12 +75,6 @@ ui_hnm1=URLからのホスト名 ui_hnm2=URLからのドメイン名 ui_hnm3=ほかの名前 .. ui_tabs=モジュールを分類しますか？ -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_descdeb=このフォームを使用すると、Debianパッケージをアップグレードすることにより、Userminインストール全体を新しいバージョンにアップグレードできます。ローカルの.debファイル、アップロードされたファイル、またはwww.usermin.comの最新バージョンからインストールできます。手動アップグレードの場合と同様に、すべての構成設定とサードパーティモジュールが保持されます。 upgrade_url=ftpまたはhttp URLから diff --git a/usermin/lang/ko.auto b/usermin/lang/ko.auto index ece995d05..90d34e528 100644 --- a/usermin/lang/ko.auto +++ b/usermin/lang/ko.auto @@ -250,12 +250,6 @@ ui_hnm1=URL의 호스트 이름 ui_hnm2=URL의 도메인 이름 ui_hnm3=다른 이름 .. ui_tabs=모듈을 분류 하시겠습니까? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Usermin 업그레이드 upgrade_title2=Usermin 설치 diff --git a/usermin/lang/lt.auto b/usermin/lang/lt.auto index 5988e6dbc..dc8e08fa5 100644 --- a/usermin/lang/lt.auto +++ b/usermin/lang/lt.auto @@ -250,12 +250,6 @@ ui_hnm1=Pagrindinio kompiuterio vardas iš URL ui_hnm2=Domeno vardas iš URL ui_hnm3=Kitas vardas .. ui_tabs=Klasifikuokite modulius? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Atnaujinkite „Usermin“ upgrade_title2=Įdiekite „Usermin“ diff --git a/usermin/lang/lv.auto b/usermin/lang/lv.auto index 2b3664c48..1d69eb72d 100644 --- a/usermin/lang/lv.auto +++ b/usermin/lang/lv.auto @@ -250,12 +250,6 @@ ui_hnm1=Resursdatora nosaukums no URL ui_hnm2=Domēna vārds no URL ui_hnm3=Cits vārds .. ui_tabs=Kategorizēt moduļus? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Jaunināt Usermin upgrade_title2=Instalējiet Usermin diff --git a/usermin/lang/ms.auto b/usermin/lang/ms.auto index 07916fc6f..4a95c75c1 100644 --- a/usermin/lang/ms.auto +++ b/usermin/lang/ms.auto @@ -245,12 +245,6 @@ ui_hnm1=Nama hos dari URL ui_hnm2=Nama domain dari URL ui_hnm3=Nama lain .. ui_tabs=Categorikan modul? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Tingkatkan Usermin upgrade_title2=Pasang Usermin diff --git a/usermin/lang/mt.auto b/usermin/lang/mt.auto index 4aec47088..43ba391e6 100644 --- a/usermin/lang/mt.auto +++ b/usermin/lang/mt.auto @@ -250,12 +250,6 @@ ui_hnm1=Name Host minn URL ui_hnm2=Isem tad-domain mill-URL ui_hnm3=Isem ieħor .. ui_tabs=Tikkategorizza l-moduli? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Aġġorna Usermin upgrade_title2=Installa Usermin diff --git a/usermin/lang/nl.auto b/usermin/lang/nl.auto index 573ae973c..0ce186c22 100644 --- a/usermin/lang/nl.auto +++ b/usermin/lang/nl.auto @@ -3,13 +3,6 @@ lang_title2=Usermin-taal en locale session_authmode=Authenticatie methode -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system - advanced_pass_desc=Wachtwoord beschikbaar maken voor Usermin-programma's? advanced_pass_help=Werkt niet als sessieverificatie is ingeschakeld diff --git a/usermin/lang/no.auto b/usermin/lang/no.auto index f1393e43b..49d9f605b 100644 --- a/usermin/lang/no.auto +++ b/usermin/lang/no.auto @@ -1,13 +1,6 @@ lang_title=Språk og lokalitet lang_title2=Brukermin språk og lokalitet -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system - advanced_pass_desc=Gjøre passord tilgjengelig for Usermin-programmer? advanced_pass_help=Fungerer ikke når øktautentisering er aktivert diff --git a/usermin/lang/pl.auto b/usermin/lang/pl.auto index e2b20975d..7fe8a5149 100644 --- a/usermin/lang/pl.auto +++ b/usermin/lang/pl.auto @@ -3,13 +3,6 @@ lang_title2=Język i ustawienia regionalne Usermin session_authmode=Metoda Uwierzytelnienia -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system - advanced_pass_desc=Udostępnić hasło programom Usermin? advanced_pass_help=Nie działa, gdy włączone jest uwierzytelnianie sesji diff --git a/usermin/lang/pt.auto b/usermin/lang/pt.auto index 2a7181916..00e5af9fa 100644 --- a/usermin/lang/pt.auto +++ b/usermin/lang/pt.auto @@ -250,12 +250,6 @@ ui_hnm1=Nome do host do URL ui_hnm2=Nome de domínio do URL ui_hnm3=Outro nome .. ui_tabs=Categorizar módulos? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Atualizar Usermin upgrade_title2=Instale Usermin diff --git a/usermin/lang/pt_BR.auto b/usermin/lang/pt_BR.auto index 849d92e84..a09c39aff 100644 --- a/usermin/lang/pt_BR.auto +++ b/usermin/lang/pt_BR.auto @@ -9,13 +9,6 @@ ssl_savekey=Este formulário permite fazer upload de uma chave privada e um cert ssl_copycert=Copiar certificado do Webmin ssl_copycertdesc=Copie o certificado SSL, chave privada, certificado CA e outras configurações que o Webmin está usando. -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system - log_copycert=Configurações de SSL copiadas do Webmin advanced_pass_desc=Disponibilizar senha para programas Usermin? diff --git a/usermin/lang/ro.auto b/usermin/lang/ro.auto index da0604d36..83c7628a3 100644 --- a/usermin/lang/ro.auto +++ b/usermin/lang/ro.auto @@ -250,12 +250,6 @@ ui_hnm1=Nume gazdă de la URL ui_hnm2=Numele de domeniu de la URL ui_hnm3=Alt nume .. ui_tabs=Categorizați modulele? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Actualizați Usermin upgrade_title2=Instalați Usermin diff --git a/usermin/lang/ru.auto b/usermin/lang/ru.auto index 8018f4670..fb85aa95e 100644 --- a/usermin/lang/ru.auto +++ b/usermin/lang/ru.auto @@ -66,12 +66,6 @@ ui_hnm1=Имя хоста из URL ui_hnm2=Доменное имя из URL ui_hnm3=Другое имя .. ui_tabs=Категоризировать модули? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title2=Установить Usermin upgrade_descdeb=Эта форма позволяет вам обновить всю установку Usermin до новой версии, обновив ее пакет Debian. Вы можете установить из локального файла.deb, загруженного файла или из последней версии на www.usermin.com. Как и при ручном обновлении, все ваши настройки и сторонние модули будут сохранены. diff --git a/usermin/lang/sk.auto b/usermin/lang/sk.auto index 575a4a2d3..515f645f7 100644 --- a/usermin/lang/sk.auto +++ b/usermin/lang/sk.auto @@ -250,12 +250,6 @@ ui_hnm1=Názov hostiteľa z adresy URL ui_hnm2=Názov domény z adresy URL ui_hnm3=Iné meno .. ui_tabs=Kategorizovať moduly? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Aktualizujte Usermin upgrade_title2=Nainštalujte Usermin diff --git a/usermin/lang/sl.auto b/usermin/lang/sl.auto index 3775028c4..aa9ca6b5f 100644 --- a/usermin/lang/sl.auto +++ b/usermin/lang/sl.auto @@ -250,12 +250,6 @@ ui_hnm1=Ime gostitelja iz URL-ja ui_hnm2=Ime domene z naslova URL ui_hnm3=Drugo ime .. ui_tabs=Razvrstiti module? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Nadgradite Usermin upgrade_title2=Namestite Usermin diff --git a/usermin/lang/sv.auto b/usermin/lang/sv.auto index b3456f255..060466dc8 100644 --- a/usermin/lang/sv.auto +++ b/usermin/lang/sv.auto @@ -250,12 +250,6 @@ ui_hnm1=Värdnamn från URL ui_hnm2=Domännamn från URL ui_hnm3=Annat namn .. ui_tabs=Kategorisera moduler? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Uppgradera Usermin upgrade_title2=Installera Usermin diff --git a/usermin/lang/th.auto b/usermin/lang/th.auto index 91ff61412..fe6b9d181 100644 --- a/usermin/lang/th.auto +++ b/usermin/lang/th.auto @@ -250,12 +250,6 @@ ui_hnm1=ชื่อโฮสต์จาก URL ui_hnm2=ชื่อโดเมนจาก URL ui_hnm3=ชื่ออื่น ๆ .. ui_tabs=จัดหมวดหมู่โมดูลหรือไม่ -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=อัพเกรด Usermin upgrade_title2=ติดตั้ง Usermin diff --git a/usermin/lang/tr.auto b/usermin/lang/tr.auto index 4bd779553..e94d0ee5a 100644 --- a/usermin/lang/tr.auto +++ b/usermin/lang/tr.auto @@ -250,12 +250,6 @@ ui_hnm1=URL'den ana bilgisayar adı ui_hnm2=URL'den alan adı ui_hnm3=Diğer isim .. ui_tabs=Modüller kategorize edilsin mi? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Usermin'i Yükselt upgrade_title2=Usermin'i yükle diff --git a/usermin/lang/uk.auto b/usermin/lang/uk.auto index bdf498bf1..2ebd0625e 100644 --- a/usermin/lang/uk.auto +++ b/usermin/lang/uk.auto @@ -66,12 +66,6 @@ ui_hnm1=Ім'я хосту з URL-адреси ui_hnm2=Ім’я домену з URL-адреси ui_hnm3=Інша назва .. ui_tabs=Класифікувати модулі? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title2=Встановити Usermin upgrade_descdeb=Ця форма дозволяє оновити всю вашу установку Usermin до нової версії, оновивши пакет Debian. Ви можете встановити з локального.deb-файлу, завантаженого файлу або з останньої версії за посиланням www.usermin.com. Так само, як і вручну, оновлення буде збережено всі налаштування конфігурації та сторонні модулі. diff --git a/usermin/lang/ur.auto b/usermin/lang/ur.auto index 9ece209b5..a53778ae4 100644 --- a/usermin/lang/ur.auto +++ b/usermin/lang/ur.auto @@ -250,12 +250,6 @@ ui_hnm1=یو آر ایل کا میزبان نام ui_hnm2=یو آر ایل سے ڈومین کا نام ui_hnm3=دوسرا نام .. ui_tabs=ماڈیول کی درجہ بندی کریں؟ -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=یوزر مین کو اپ گریڈ کریں upgrade_title2=یوزر مین انسٹال کریں diff --git a/usermin/lang/vi.auto b/usermin/lang/vi.auto index 0c5fc59ca..aa88a53f1 100644 --- a/usermin/lang/vi.auto +++ b/usermin/lang/vi.auto @@ -250,12 +250,6 @@ ui_hnm1=Tên máy chủ từ URL ui_hnm2=Tên miền từ URL ui_hnm3=Tên khác .. ui_tabs=Phân loại mô-đun? -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=Nâng cấp Usermin upgrade_title2=Cài đặt Usermin diff --git a/usermin/lang/zh.auto b/usermin/lang/zh.auto index af9dcace1..f87cb3416 100644 --- a/usermin/lang/zh.auto +++ b/usermin/lang/zh.auto @@ -250,12 +250,6 @@ ui_hnm1=网址中的主机名 ui_hnm2=网址中的域名 ui_hnm3=其他名字 .. ui_tabs=分类模块？ -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title=升级Usermin upgrade_title2=安装Usermin diff --git a/usermin/lang/zh_TW.auto b/usermin/lang/zh_TW.auto index 3ad21b2e3..debcf89d7 100644 --- a/usermin/lang/zh_TW.auto +++ b/usermin/lang/zh_TW.auto @@ -107,12 +107,6 @@ ui_hnm1=網址中的主機名 ui_hnm2=網址中的域名 ui_hnm3=其他名字 .. ui_tabs=分類模塊？ -ui_show=Display on the dashboard​ -ui_show_host=System hostname -ui_show_os=Operating system -ui_show_ver=Usermin version -ui_show_tver=Theme version -ui_show_time=Time on system upgrade_title2=安裝Usermin upgrade_descdeb=通過此表，您可以通過升級其Debian軟件包將整個Usermin安裝升級到新版本。您可以從本地.deb文件，上載的文件或最新版本的www.usermin.com安裝。與手動升級一樣，所有配置設置和第三方模塊都將保留。 diff --git a/vnc/lang/af.auto b/vnc/lang/af.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/af.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/ar.auto b/vnc/lang/ar.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/ar.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/be.auto b/vnc/lang/be.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/be.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/bg.auto b/vnc/lang/bg.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/bg.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/ca.auto b/vnc/lang/ca.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/ca.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/cs.auto b/vnc/lang/cs.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/cs.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/da.auto b/vnc/lang/da.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/da.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/es.auto b/vnc/lang/es.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/es.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/eu.auto b/vnc/lang/eu.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/eu.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/fa.auto b/vnc/lang/fa.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/fa.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/fi.auto b/vnc/lang/fi.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/fi.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/fr.auto b/vnc/lang/fr.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/fr.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/he.auto b/vnc/lang/he.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/he.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/hr.auto b/vnc/lang/hr.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/hr.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/hu.auto b/vnc/lang/hu.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/hu.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/it.auto b/vnc/lang/it.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/it.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/ja.auto b/vnc/lang/ja.auto deleted file mode 100644 index 2ee79608a..000000000 --- a/vnc/lang/ja.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/ko.auto b/vnc/lang/ko.auto deleted file mode 100644 index 2ee79608a..000000000 --- a/vnc/lang/ko.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/lt.auto b/vnc/lang/lt.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/lt.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/lv.auto b/vnc/lang/lv.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/lv.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/ms.auto b/vnc/lang/ms.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/ms.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/mt.auto b/vnc/lang/mt.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/mt.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/nl.auto b/vnc/lang/nl.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/nl.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/no.auto b/vnc/lang/no.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/no.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/pl.auto b/vnc/lang/pl.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/pl.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/pt.auto b/vnc/lang/pt.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/pt.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/pt_BR.auto b/vnc/lang/pt_BR.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/pt_BR.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/ro.auto b/vnc/lang/ro.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/ro.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/ru.auto b/vnc/lang/ru.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/ru.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/sk.auto b/vnc/lang/sk.auto deleted file mode 100644 index 2ee79608a..000000000 --- a/vnc/lang/sk.auto +++ /dev/null @@ -1 +0,0 @@ -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/sl.auto b/vnc/lang/sl.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/sl.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/sv.auto b/vnc/lang/sv.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/sv.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/th.auto b/vnc/lang/th.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/th.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/tr.auto b/vnc/lang/tr.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/tr.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/uk.auto b/vnc/lang/uk.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/uk.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/ur.auto b/vnc/lang/ur.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/ur.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/vi.auto b/vnc/lang/vi.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/vi.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/zh.auto b/vnc/lang/zh.auto deleted file mode 100644 index 4a52020b8..000000000 --- a/vnc/lang/zh.auto +++ /dev/null @@ -1,6 +0,0 @@ -index_title=VNC Client -index_warn=Warning! This VNC session is not encrypted. -index_nojava=This module requires java to function, but your browser does not support java -index_credits=VNC client applet created by AT&T. See http://www.uk.research.att.com/vnc for more information. -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/vnc/lang/zh_TW.auto b/vnc/lang/zh_TW.auto deleted file mode 100644 index 81d19cc56..000000000 --- a/vnc/lang/zh_TW.auto +++ /dev/null @@ -1,2 +0,0 @@ -index_esocket=There is no VNC server running on $1 port $2. -index_ecmd=The VNC server program $1 needed for running a specific program is not installed. diff --git a/webalizer/lang/de b/webalizer/lang/de index 397f5c559..1a6955b73 100644 --- a/webalizer/lang/de +++ b/webalizer/lang/de @@ -161,4 +161,4 @@ acl_dir=Berichte nur für Logs unter diesem Verzeichnis anzeigen und bearbeiten acl_user=Webalizer als Unix-Benutzer ausführen acl_this=Aktueller Webmin-Benutzer acl_any=Beliebiger Benutzer -acl_add=Kann neue Logdateien zur Analyse hinzufügen? +acl_add=Kann neue Logdateien zur Analyse hinzufügen? \ No newline at end of file diff --git a/webmincron/lang/de b/webmincron/lang/de index 3bbce5245..74c446511 100644 --- a/webmincron/lang/de +++ b/webmincron/lang/de @@ -17,4 +17,4 @@ edit_special_monthly=Monatlich (am 1.) edit_special_yearly=Jährlich (am 1. Januar) log_success=Erfolgreich ausgeführt $2 in $1 -log_failure=Fehlgeschlagen bei der Ausführung von $2 in $1 : $3 +log_failure=Fehlgeschlagen bei der Ausführung von $2 in $1 : $3 \ No newline at end of file diff --git a/webminlog/lang/af.auto b/webminlog/lang/af.auto index 34b81849b..efc7d0956 100644 --- a/webminlog/lang/af.auto +++ b/webminlog/lang/af.auto @@ -37,7 +37,6 @@ index_notify=Stuur e-pos vir Webmin-aksies? index_notify_mods=Vir aksies in modules index_notify_users=Vir optrede deur gebruikers index_notify_email=Stuur e-pos aan -index_notify_email_def=Default notification address index_notify_usub=Sluit gebruikersnaam by e-posonderwerp in? index_notify_msub=Sluit handeling by e-posonderwerp in? index_searchtab=Soek logs @@ -46,7 +45,8 @@ index_searchdesc=Hierdie vorm kan gebruik word om te soek vir Webmin-aksies volg index_notifydesc=Gebruik hierdie vorm om e-poskennisgewings op te stel wanneer Webmin-aksies deur geselekteerde gebruikers of in gekose modules uitgevoer word. search_title=Soek Resultate -search_datetime=Date and time +search_date=datum +search_time=tyd search_user=gebruiker search_host=Kliëntadres search_webmin=Webmin-bediener diff --git a/webminlog/lang/ar b/webminlog/lang/ar index 54247a5ff..816a3c0b1 100644 --- a/webminlog/lang/ar +++ b/webminlog/lang/ar @@ -32,6 +32,8 @@ index_long=عرض أوصاف الفعل الكامل؟ index_global=<ليس في أي وحدة> search_title=نتائج البحث +search_date=تاريخ +search_time=الوقت search_user=المستخدم search_host=عنوان العميل search_webmin=خادم Webmin diff --git a/webminlog/lang/ar.auto b/webminlog/lang/ar.auto index f7a6901e1..5b30eeb3f 100644 --- a/webminlog/lang/ar.auto +++ b/webminlog/lang/ar.auto @@ -5,7 +5,6 @@ index_notify=إرسال بريد إلكتروني لإجراءات Webmin؟ index_notify_mods=للإجراءات في الوحدات index_notify_users=لإجراءات من قبل المستخدمين index_notify_email=إرسال بريد إلكتروني إلى -index_notify_email_def=Default notification address index_notify_usub=تضمين اسم المستخدم في موضوع البريد الإلكتروني؟ index_notify_msub=تضمين العمل في موضوع البريد الإلكتروني؟ index_searchtab=سجلات البحث @@ -13,8 +12,6 @@ index_notifytab=إشعار البريد الإلكتروني index_searchdesc=يمكن استخدام هذا النموذج للبحث عن إجراءات Webmin حسب المستخدم والوحدة ونطاق التاريخ والملفات المؤثرة. index_notifydesc=استخدم هذا النموذج لتكوين إعلامات البريد الإلكتروني عندما يتم تنفيذ إجراءات Webmin بواسطة مستخدمين محددين أو في وحدات مختارة. -search_datetime=Date and time - acl_self=النفس فقط acl_notify=هل يمكن تكوين إشعارات البريد الإلكتروني؟ diff --git a/webminlog/lang/be.auto b/webminlog/lang/be.auto index a4f87ad31..fe8aaaf96 100644 --- a/webminlog/lang/be.auto +++ b/webminlog/lang/be.auto @@ -37,7 +37,6 @@ index_notify=Адправіць электронную пошту для дзе index_notify_mods=Для дзеянняў у модулях index_notify_users=За дзеянні карыстальнікаў index_notify_email=Адправіць электроннае паведамленне на -index_notify_email_def=Default notification address index_notify_usub=Уключыць імя карыстальніка ў тэму электроннай пошты? index_notify_msub=Уключыць дзеянне ў тэму электроннай пошты? index_searchtab=Журналы пошуку @@ -46,7 +45,8 @@ index_searchdesc=Гэтую форму можна выкарыстоўваць index_notifydesc=Выкарыстоўвайце гэтую форму, каб наладзіць апавяшчэнні па электроннай пошце, калі дзеянні Webmin выконваюцца абранымі карыстальнікамі або ў выбраных модулях. search_title=Вынікі пошуку -search_datetime=Date and time +search_date=Дата +search_time=Час search_user=Карыстальнік search_host=Адрас кліента search_webmin=Сервер Webmin diff --git a/webminlog/lang/bg.auto b/webminlog/lang/bg.auto index 06f300879..18c60082f 100644 --- a/webminlog/lang/bg.auto +++ b/webminlog/lang/bg.auto @@ -37,7 +37,6 @@ index_notify=Изпращане на имейл за действия на Webmi index_notify_mods=За действия в модули index_notify_users=За действия на потребителите index_notify_email=Изпратете имейл до -index_notify_email_def=Default notification address index_notify_usub=Да се включи ли потребителско име в темата на имейла? index_notify_msub=Да се включи ли действие в темата на имейла? index_searchtab=Търсене на журнали @@ -46,7 +45,8 @@ index_searchdesc=Този формуляр може да се използва index_notifydesc=Използвайте този формуляр, за да конфигурирате известия по имейл, когато действията на Webmin се извършват от избрани потребители или в избрани модули. search_title=Резултати от търсенето -search_datetime=Date and time +search_date=Дата +search_time=път search_user=потребител search_host=Адрес на клиента search_webmin=Webmin сървър diff --git a/webminlog/lang/ca b/webminlog/lang/ca index 8d0307a7c..008b3b415 100644 --- a/webminlog/lang/ca +++ b/webminlog/lang/ca @@ -32,6 +32,8 @@ index_long=Mostra les descripcions llargues de les accions index_global=<A cap mòdul> search_title=Resultats de la Recerca +search_date=Data +search_time=Hora search_user=Usuari search_host=Adreça del Client search_webmin=Servidor Webmin diff --git a/webminlog/lang/ca.auto b/webminlog/lang/ca.auto index b9cfcee02..7c4aeaf02 100644 --- a/webminlog/lang/ca.auto +++ b/webminlog/lang/ca.auto @@ -5,7 +5,6 @@ index_notify=Vols enviar un correu electrònic per a accions de Webmin? index_notify_mods=Per a accions en mòduls index_notify_users=Per a accions dels usuaris index_notify_email=Enviar correu electrònic a -index_notify_email_def=Default notification address index_notify_usub=Inclou el nom d'usuari a l'assumpte del correu electrònic? index_notify_msub=Inclou l'acció a l'assumpte del correu electrònic? index_searchtab=Cerca registres @@ -13,8 +12,6 @@ index_notifytab=Notificació per correu electrònic index_searchdesc=Aquest formulari es pot utilitzar per cercar accions de Webmin per usuari, mòdul, interval de dates i fitxers realitzats. index_notifydesc=Utilitzeu aquest formulari per configurar les notificacions per correu electrònic quan les accions de Webmin les realitzin usuaris seleccionats o en mòduls escollits. -search_datetime=Date and time - acl_self=Només jo acl_notify=Es poden configurar les notificacions per correu electrònic? diff --git a/webminlog/lang/cs b/webminlog/lang/cs index 74d0a5083..1ee60262d 100644 --- a/webminlog/lang/cs +++ b/webminlog/lang/cs @@ -28,6 +28,8 @@ index_stimes=Akce v období index_shost=Server, obsahující Webmin search_title=Výsledky hledání +search_date=Datum +search_time=Čas search_user=Uživatel search_host=Adresa klienta search_webmin=Webmin server diff --git a/webminlog/lang/cs.auto b/webminlog/lang/cs.auto index 22f5245e3..9158ed390 100644 --- a/webminlog/lang/cs.auto +++ b/webminlog/lang/cs.auto @@ -9,7 +9,6 @@ index_notify=Odeslat e-mail pro akce Webmin? index_notify_mods=Pro akce v modulech index_notify_users=Pro akce uživatelů index_notify_email=Odeslat email na -index_notify_email_def=Default notification address index_notify_usub=Zahrnout uživatelské jméno do předmětu e-mailu? index_notify_msub=Zahrnout akci do předmětu e-mailu? index_searchtab=Prohledejte protokoly @@ -17,7 +16,6 @@ index_notifytab=Email upozornění index_searchdesc=Tento formulář lze použít k vyhledání akcí Webminu podle uživatele, modulu, období a provedených souborů. index_notifydesc=Tento formulář použijte ke konfiguraci e-mailových upozornění, když jsou akce Webminu prováděny vybranými uživateli nebo ve vybraných modulech. -search_datetime=Date and time search_critd=kde popis obsahuje $1 search_global=Žádný search_global_login=Přihlášen do Webmin diff --git a/webminlog/lang/da.auto b/webminlog/lang/da.auto index d5b58076f..1e286c1dc 100644 --- a/webminlog/lang/da.auto +++ b/webminlog/lang/da.auto @@ -37,7 +37,6 @@ index_notify=Send e-mail til Webmin-handlinger? index_notify_mods=Til handlinger i moduler index_notify_users=Til handlinger fra brugere index_notify_email=Send e-mail til -index_notify_email_def=Default notification address index_notify_usub=Vil du inkludere brugernavn i e-mail-emnet? index_notify_msub=Vil du inkludere handling i e-mail-emnet? index_searchtab=Søg i logs @@ -46,7 +45,8 @@ index_searchdesc=Denne formular kan bruges til at søge efter Webmin-handlinger index_notifydesc=Brug denne formular til at konfigurere e-mail-meddelelser, når Webmin-handlinger udføres af udvalgte brugere eller i valgte moduler. search_title=Søgeresultater -search_datetime=Date and time +search_date=Dato +search_time=Tid search_user=Bruger search_host=Klientadresse search_webmin=Webmin Server diff --git a/webminlog/lang/de b/webminlog/lang/de index 89b98b26b..1bd52f350 100644 --- a/webminlog/lang/de +++ b/webminlog/lang/de @@ -150,4 +150,4 @@ notify_eusers=Keine Benutzer ausgewählt notify_eemail=Keine E-Mail-Adresse eingegeben log_rollback=Aktion $1 im Modul $2 zurückgesetzt -log_notify=E-Mail-Benachrichtigungsoptionen gespeichert +log_notify=E-Mail-Benachrichtigungsoptionen gespeichert \ No newline at end of file diff --git a/webminlog/lang/el.auto b/webminlog/lang/el.auto index 45866c93f..72267f01a 100644 --- a/webminlog/lang/el.auto +++ b/webminlog/lang/el.auto @@ -37,7 +37,6 @@ index_notify=Αποστολή email για ενέργειες Webmin; index_notify_mods=Για ενέργειες σε ενότητες index_notify_users=Για ενέργειες από χρήστες index_notify_email=Αποστολή email στο -index_notify_email_def=Default notification address index_notify_usub=Να συμπεριληφθεί το όνομα χρήστη στο θέμα του email; index_notify_msub=Συμπερίληψη ενέργειας στο θέμα του email; index_searchtab=Αναζήτηση αρχείων καταγραφής @@ -46,7 +45,8 @@ index_searchdesc=Αυτή η φόρμα μπορεί να χρησιμοποιη index_notifydesc=Χρησιμοποιήστε αυτήν τη φόρμα για να διαμορφώσετε τις ειδοποιήσεις μέσω email όταν οι ενέργειες Webmin εκτελούνται από επιλεγμένους χρήστες ή σε επιλεγμένες μονάδες. search_title=Αποτελέσματα αναζήτησης -search_datetime=Date and time +search_date=Ημερομηνία +search_time=χρόνος search_user=Χρήστης search_host=Διεύθυνση πελάτη search_webmin=Webmin Server diff --git a/webminlog/lang/es b/webminlog/lang/es index a87237087..d18437f3c 100644 --- a/webminlog/lang/es +++ b/webminlog/lang/es @@ -18,6 +18,8 @@ index_wall=De cualquier servidor Webmin index_whost=Del servidor search_title=Resultados de la Búsqueda +search_date=Fecha +search_time=Hora search_user=Usuario search_host=Dirección de Cliente search_webmin=Servidor Webmin diff --git a/webminlog/lang/es.auto b/webminlog/lang/es.auto index ecfd665f9..075e6de46 100644 --- a/webminlog/lang/es.auto +++ b/webminlog/lang/es.auto @@ -19,7 +19,6 @@ index_notify=¿Enviar correo electrónico para acciones de Webmin? index_notify_mods=Para acciones en módulos index_notify_users=Para acciones de los usuarios index_notify_email=Enviar el email a -index_notify_email_def=Default notification address index_notify_usub=¿Incluir nombre de usuario en el asunto del correo electrónico? index_notify_msub=¿Incluir acción en el asunto del correo electrónico? index_searchtab=Buscar registros @@ -27,7 +26,6 @@ index_notifytab=Notificación de correo electrónico index_searchdesc=Este formulario se puede utilizar para buscar acciones de Webmin por usuario, módulo, rango de fechas y archivos efectuados. index_notifydesc=Utilice este formulario para configurar notificaciones por correo electrónico cuando las acciones de Webmin sean realizadas por usuarios seleccionados o en módulos seleccionados. -search_datetime=Date and time search_none2=Ninguna acción coincidió con su búsqueda de acciones. search_critd=donde la descripción contiene $1 search_global=Ninguna diff --git a/webminlog/lang/eu.auto b/webminlog/lang/eu.auto index dfe224be3..8ae1acc5d 100644 --- a/webminlog/lang/eu.auto +++ b/webminlog/lang/eu.auto @@ -37,7 +37,6 @@ index_notify=Webmin ekintzetarako mezu elektronikoa bidali nahi duzu? index_notify_mods=Moduluetako ekintzetarako index_notify_users=Erabiltzaileen ekintzetarako index_notify_email=Bidali mezu elektronikoa hona -index_notify_email_def=Default notification address index_notify_usub=Erabiltzaile izena gehitu mezu elektronikoaren gaian? index_notify_msub=Ekintza sartu mezu elektronikoaren gaian? index_searchtab=Bilatu erregistroak @@ -46,7 +45,8 @@ index_searchdesc=Inprimaki hau Webmin ekintzak bilatzeko erabil daiteke erabiltz index_notifydesc=Erabili inprimaki hau posta elektronikoko jakinarazpenak konfiguratzeko, hautatutako erabiltzaileek edo aukeratutako moduluetan Webmin ekintzak egiten dituztenean. search_title=Bilaketaren emaitzak -search_datetime=Date and time +search_date=data +search_time=Ordua search_user=Erabiltzaileak search_host=Bezeroaren helbidea search_webmin=Webmin zerbitzaria diff --git a/webminlog/lang/fa.auto b/webminlog/lang/fa.auto index b336bea27..addf7fc95 100644 --- a/webminlog/lang/fa.auto +++ b/webminlog/lang/fa.auto @@ -37,7 +37,6 @@ index_notify=برای اقدامات وبمین ایمیل ارسال شود؟ index_notify_mods=برای اقدامات در ماژول ها index_notify_users=برای اقدامات کاربران index_notify_email=ارسال ایمیل به -index_notify_email_def=Default notification address index_notify_usub=نام کاربری در موضوع ایمیل لحاظ شود؟ index_notify_msub=اقدام در موضوع ایمیل لحاظ شود؟ index_searchtab=جستجوی سیاهههای مربوط @@ -46,7 +45,8 @@ index_searchdesc=از این فرم می توان برای جستجوی اقدا index_notifydesc=از این فرم برای پیکربندی اعلان های ایمیل زمانی که اقدامات وب مین توسط کاربران منتخب یا در ماژول های انتخابی انجام می شود، استفاده کنید. search_title=نتایج جستجو -search_datetime=Date and time +search_date=تاریخ +search_time=زمان search_user=کاربر search_host=آدرس مشتری search_webmin=وب سرور diff --git a/webminlog/lang/fi.auto b/webminlog/lang/fi.auto index 909e19139..204100bbb 100644 --- a/webminlog/lang/fi.auto +++ b/webminlog/lang/fi.auto @@ -37,7 +37,6 @@ index_notify=Lähetetäänkö sähköpostia Webmin-toimintoihin? index_notify_mods=Moduulien toimiin index_notify_users=Käyttäjien toimiin index_notify_email=Lähetä sähköpostia osoitteeseen -index_notify_email_def=Default notification address index_notify_usub=Sisällytetäänkö sähköpostin aiheeseen käyttäjätunnus? index_notify_msub=Sisällytetäänkö toiminto sähköpostin aiheeseen? index_searchtab=Hakulokit @@ -46,7 +45,8 @@ index_searchdesc=Tällä lomakkeella voidaan etsiä Webmin-toimintoja käyttäj index_notifydesc=Tällä lomakkeella voit määrittää sähköposti-ilmoitukset, kun valitut käyttäjät tai valitut modulit suorittavat Webmin-toimintoja. search_title=Hakutulokset -search_datetime=Date and time +search_date=Päivämäärä +search_time=Aika search_user=käyttäjä search_host=Asiakkaan osoite search_webmin=Webmin-palvelin diff --git a/webminlog/lang/fr b/webminlog/lang/fr index 4bd2fe890..7a50cd52f 100644 --- a/webminlog/lang/fr +++ b/webminlog/lang/fr @@ -18,6 +18,8 @@ index_wall=À partir de n'importe quel serveur Webmin index_whost=À partir du serveur search_title=Résultats d'une recherche +search_date=Date +search_time=Heure search_user=Utilisateur search_host=Adresse du client search_webmin=Serveur Webmin diff --git a/webminlog/lang/fr.auto b/webminlog/lang/fr.auto index 31191a970..bdff809d2 100644 --- a/webminlog/lang/fr.auto +++ b/webminlog/lang/fr.auto @@ -19,7 +19,6 @@ index_notify=Envoyer un e-mail pour les actions Webmin ? index_notify_mods=Pour les actions dans les modules index_notify_users=Pour les actions des utilisateurs index_notify_email=Envoyer un e-mail à -index_notify_email_def=Default notification address index_notify_usub=Inclure le nom d'utilisateur dans l'objet de l'e-mail ? index_notify_msub=Inclure l'action dans l'objet de l'e-mail ? index_searchtab=Journaux de recherche @@ -27,7 +26,6 @@ index_notifytab=Notification par e-mail index_searchdesc=Ce formulaire peut être utilisé pour rechercher des actions Webmin par utilisateur, module, plage de dates et fichiers effectués. index_notifydesc=Utilisez ce formulaire pour configurer les notifications par e-mail lorsque des actions Webmin sont effectuées par des utilisateurs sélectionnés ou dans des modules choisis. -search_datetime=Date and time search_none2=Aucune action ne correspond à votre recherche d'actions search_critd=où la description contient $1 search_global=Aucun diff --git a/webminlog/lang/he.auto b/webminlog/lang/he.auto index 6d5b0c57e..46d0cf93d 100644 --- a/webminlog/lang/he.auto +++ b/webminlog/lang/he.auto @@ -37,7 +37,6 @@ index_notify=לשלוח אימייל לפעולות Webmin? index_notify_mods=לפעולות במודולים index_notify_users=לפעולות של משתמשים index_notify_email=שלח אימייל ל -index_notify_email_def=Default notification address index_notify_usub=האם לכלול שם משתמש בנושא האימייל? index_notify_msub=האם לכלול פעולה בנושא האימייל? index_searchtab=חפש ביומנים @@ -46,7 +45,8 @@ index_searchdesc=ניתן להשתמש בטופס זה כדי לחפש פעול index_notifydesc=השתמש בטופס זה כדי להגדיר הודעות דוא"ל כאשר פעולות Webmin מבוצעות על ידי משתמשים נבחרים או במודולים שנבחרו. search_title=תוצאות חיפוש -search_datetime=Date and time +search_date=תאריך +search_time=זמן search_user=משתמש search_host=כתובת לקוח search_webmin=שרת Webmin diff --git a/webminlog/lang/hr b/webminlog/lang/hr index 159d36d42..f70efffdb 100644 --- a/webminlog/lang/hr +++ b/webminlog/lang/hr @@ -19,6 +19,8 @@ index_wall=Od bilo kojeg Webmin servera index_whost=Od servera search_title=Rezultat pretrage +search_date=Datum +search_time=Vrijeme search_user=Korisnik search_host=Adresa klijenta search_webmin=Webmin server diff --git a/webminlog/lang/hr.auto b/webminlog/lang/hr.auto index 60d68c7ac..e0c58a9d9 100644 --- a/webminlog/lang/hr.auto +++ b/webminlog/lang/hr.auto @@ -18,7 +18,6 @@ index_notify=Poslati e-poštu za radnje Webmina? index_notify_mods=Za radnje u modulima index_notify_users=Za radnje korisnika index_notify_email=Pošaljite email na -index_notify_email_def=Default notification address index_notify_usub=Uključiti korisničko ime u predmet e-pošte? index_notify_msub=Uključiti radnju u predmet e-pošte? index_searchtab=Dnevnici pretraživanja @@ -26,7 +25,6 @@ index_notifytab=Obavijest putem e-pošte index_searchdesc=Ovaj obrazac se može koristiti za traženje radnji Webmina prema korisniku, modulu, rasponu datuma i izvršenim datotekama. index_notifydesc=Koristite ovaj obrazac za konfiguriranje obavijesti e-poštom kada odabrani korisnici ili u odabranim modulima izvode radnje Webmina. -search_datetime=Date and time search_none2=Nijedna radnja ne odgovara vašoj potrazi za radnjama search_critd=gdje opis sadrži $1 search_global=nijedan diff --git a/webminlog/lang/hu b/webminlog/lang/hu index 60173267b..b70436403 100644 --- a/webminlog/lang/hu +++ b/webminlog/lang/hu @@ -18,6 +18,8 @@ index_wall=Bármelyik Webmin szerver index_whost=Adott szerverről search_title=A keresés eredménye +search_date=Dátum +search_time=Idő search_user=Felhasználó search_host=Kliens címe search_webmin=Webmin Szerver diff --git a/webminlog/lang/hu.auto b/webminlog/lang/hu.auto index d223538d4..0f59a0d0b 100644 --- a/webminlog/lang/hu.auto +++ b/webminlog/lang/hu.auto @@ -19,7 +19,6 @@ index_notify=E-mailt küld a Webmin műveletekhez? index_notify_mods=Modulokban végzett műveletekhez index_notify_users=A felhasználók műveleteihez index_notify_email=E-mail küldése a címre -index_notify_email_def=Default notification address index_notify_usub=Felveszi a felhasználónevet az e-mail tárgyába? index_notify_msub=Beleírja a műveletet az e-mail tárgyába? index_searchtab=Keresés a naplókban @@ -27,7 +26,6 @@ index_notifytab=Email értesítés index_searchdesc=Ez az űrlap használható Webmin műveletek keresésére felhasználó, modul, dátumtartomány és végrehajtott fájlok szerint. index_notifydesc=Ezzel az űrlappal konfigurálhatja az e-mail értesítéseket, amikor a Webmin műveleteket kiválasztott felhasználók vagy kiválasztott modulokban hajtják végre. -search_datetime=Date and time search_none2=Egyik művelet sem felelt meg a keresett műveleteknek search_critd=ahol a leírás $1 search_global=Egyik sem diff --git a/webminlog/lang/it b/webminlog/lang/it index 231d451f2..f0a5d74e4 100644 --- a/webminlog/lang/it +++ b/webminlog/lang/it @@ -14,6 +14,8 @@ index_nolog=Note - Logging in Webmin is not currently en index_nologfiles=Note - Logging of file changes is not currently enabled, so the details of logged actions will not include changed files or commands executed. search_title=Risultati della ricerca +search_date=Data +search_time=Ora search_user=Utente search_host=Indirizzo IP search_module=Modulo diff --git a/webminlog/lang/it.auto b/webminlog/lang/it.auto index 3f4a2ed21..6ca53080b 100644 --- a/webminlog/lang/it.auto +++ b/webminlog/lang/it.auto @@ -23,7 +23,6 @@ index_notify=Inviare email per azioni Webmin? index_notify_mods=Per le azioni nei moduli index_notify_users=Per le azioni degli utenti index_notify_email=Invia email a -index_notify_email_def=Default notification address index_notify_usub=Includere il nome utente nell'oggetto dell'email? index_notify_msub=Includere un'azione nell'oggetto dell'e-mail? index_searchtab=Log di ricerca @@ -31,7 +30,6 @@ index_notifytab=Notifica per email index_searchdesc=Questo modulo può essere utilizzato per cercare azioni Webmin per utente, modulo, intervallo di date e file effettuati. index_notifydesc=Usa questo modulo per configurare le notifiche e-mail quando le azioni Webmin vengono eseguite da utenti selezionati o in moduli scelti. -search_datetime=Date and time search_webmin=Webmin Server search_none2=Nessuna azione corrisponde alla tua ricerca di azioni search_critd=dove la descrizione contiene $1 diff --git a/webminlog/lang/ja b/webminlog/lang/ja index 6c415132a..086d0305d 100644 --- a/webminlog/lang/ja +++ b/webminlog/lang/ja @@ -32,6 +32,8 @@ index_long=アクションの内容を詳細に表示する index_global=<このリストにないモジュール> search_title=検索結果 +search_date=日付 +search_time=時刻 search_user=ユーザ search_host=クライアント アドレス search_webmin=Server名 diff --git a/webminlog/lang/ja.auto b/webminlog/lang/ja.auto index 76e1b53ed..358ae3933 100644 --- a/webminlog/lang/ja.auto +++ b/webminlog/lang/ja.auto @@ -5,7 +5,6 @@ index_notify=Webminアクションの電子メールを送信しますか？ index_notify_mods=モジュール内のアクションの場合 index_notify_users=ユーザーによるアクションの場合 index_notify_email=にメールを送信 -index_notify_email_def=Default notification address index_notify_usub=メールの件名にユーザー名を含めますか？ index_notify_msub=メールの件名にアクションを含めますか？ index_searchtab=検索ログ @@ -13,8 +12,6 @@ index_notifytab=電子メール通知 index_searchdesc=このフォームを使用して、ユーザー、モジュール、日付範囲、および影響を受けるファイルごとにWebminアクションを検索できます。 index_notifydesc=このフォームを使用して、選択したユーザーまたは選択したモジュールでWebminアクションが実行されたときの電子メール通知を構成します。 -search_datetime=Date and time - acl_notify=電子メール通知を構成できますか？ notify_err=通知オプションの保存に失敗しました diff --git a/webminlog/lang/ko b/webminlog/lang/ko index e1c70420e..3a61cdaee 100644 --- a/webminlog/lang/ko +++ b/webminlog/lang/ko @@ -28,6 +28,8 @@ index_stimes=동작 기간 index_shost=Webmin 서버 소스 search_title=검색 결과 +search_date=날짜 +search_time=시간 search_user=사용자 search_host=클라이언트 주소 search_webmin=Webmin 서버 diff --git a/webminlog/lang/ko.auto b/webminlog/lang/ko.auto index 4b5f801f1..b2b66dbef 100644 --- a/webminlog/lang/ko.auto +++ b/webminlog/lang/ko.auto @@ -9,7 +9,6 @@ index_notify=Webmin 작업을 위해 이메일을 보내시겠습니까? index_notify_mods=모듈의 작업 index_notify_users=사용자의 작업에 대해 index_notify_email=이메일 보내기 -index_notify_email_def=Default notification address index_notify_usub=이메일 제목에 사용자 이름을 포함하시겠습니까? index_notify_msub=이메일 제목에 작업을 포함하시겠습니까? index_searchtab=로그 검색 @@ -17,7 +16,6 @@ index_notifytab=이메일 알림 index_searchdesc=이 양식은 사용자, 모듈, 날짜 범위 및 영향을 받는 파일별로 Webmin 작업을 검색하는 데 사용할 수 있습니다. index_notifydesc=선택한 사용자 또는 선택한 모듈에서 Webmin 작업을 수행할 때 이 양식을 사용하여 이메일 알림을 구성합니다. -search_datetime=Date and time search_critd=여기서 설명은 $1을 포함합니다. search_global=없음 search_global_login=Webmin에 로그인 diff --git a/webminlog/lang/lt.auto b/webminlog/lang/lt.auto index 493ac9f9c..3e91a71f4 100644 --- a/webminlog/lang/lt.auto +++ b/webminlog/lang/lt.auto @@ -37,7 +37,6 @@ index_notify=Siųsti el. laišką dėl Webmin veiksmų? index_notify_mods=Veiksmams moduliuose index_notify_users=Už vartotojų veiksmus index_notify_email=Siųsti el -index_notify_email_def=Default notification address index_notify_usub=Į el. pašto temą įtraukti vartotojo vardą? index_notify_msub=Į el. pašto temą įtraukti veiksmą? index_searchtab=Paieškos žurnalai @@ -46,7 +45,8 @@ index_searchdesc=Ši forma gali būti naudojama ieškant Webmin veiksmų pagal v index_notifydesc=Naudokite šią formą norėdami sukonfigūruoti el. pašto pranešimus, kai Webmin veiksmus atlieka pasirinkti vartotojai arba pasirinktuose moduliuose. search_title=Paieškos rezultatai -search_datetime=Date and time +search_date=Data +search_time=Laikas search_user=Vartotojas search_host=Kliento adresas search_webmin=„Webmin Server“ diff --git a/webminlog/lang/lv.auto b/webminlog/lang/lv.auto index b559dbc0a..0cb3da09a 100644 --- a/webminlog/lang/lv.auto +++ b/webminlog/lang/lv.auto @@ -37,7 +37,6 @@ index_notify=Vai nosūtīt e-pastu Webmin darbībām? index_notify_mods=Darbībām moduļos index_notify_users=Par lietotāju darbībām index_notify_email=Sūtīt e-pastu uz -index_notify_email_def=Default notification address index_notify_usub=Vai iekļaut lietotājvārdu e-pasta tēmā? index_notify_msub=Vai e-pasta tēmā iekļaut darbību? index_searchtab=Meklēšanas žurnāli @@ -46,7 +45,8 @@ index_searchdesc=Šo veidlapu var izmantot, lai meklētu Webmin darbības pēc l index_notifydesc=Izmantojiet šo veidlapu, lai konfigurētu e-pasta paziņojumus, kad Webmin darbības veic atlasītie lietotāji vai izvēlētajos moduļos. search_title=Meklēšanas rezultāti -search_datetime=Date and time +search_date=Datums +search_time=Laiks search_user=Lietotājs search_host=Klienta adrese search_webmin=Webmin serveris diff --git a/webminlog/lang/ms b/webminlog/lang/ms index ca24e8b33..d4b9df84a 100644 --- a/webminlog/lang/ms +++ b/webminlog/lang/ms @@ -32,6 +32,8 @@ index_long=Paparkan penerangan penuh tindakan? index_global=<Tiada dalam modul> search_title=Keputusan Carian +search_date=Tarikh +search_time=Masa search_user=Pengguna search_host=Alamat Klien search_webmin=Pelayan Webmin diff --git a/webminlog/lang/ms.auto b/webminlog/lang/ms.auto index 4a266bc15..a962188ab 100644 --- a/webminlog/lang/ms.auto +++ b/webminlog/lang/ms.auto @@ -5,7 +5,6 @@ index_notify=Hantar e-mel untuk tindakan Webmin? index_notify_mods=Untuk tindakan dalam modul index_notify_users=Untuk tindakan oleh pengguna index_notify_email=Hantar e-mel ke -index_notify_email_def=Default notification address index_notify_usub=Sertakan nama pengguna dalam subjek e-mel? index_notify_msub=Sertakan tindakan dalam subjek e-mel? index_searchtab=Cari log @@ -13,7 +12,6 @@ index_notifytab=Pemberitahuan e-mel index_searchdesc=Borang ini boleh digunakan untuk mencari tindakan Webmin mengikut pengguna, modul, julat tarikh dan fail yang dilaksanakan. index_notifydesc=Gunakan borang ini untuk mengkonfigurasi pemberitahuan e-mel apabila tindakan Webmin dilakukan oleh pengguna terpilih atau dalam modul yang dipilih. -search_datetime=Date and time search_global_failed=Masuk ke Webmin gagal : $1 search_global_expiredpass=Kata laluan tamat tempoh search_global_wronguser=Pengguna tidak sah diff --git a/webminlog/lang/mt.auto b/webminlog/lang/mt.auto index e950cacdb..22e982b80 100644 --- a/webminlog/lang/mt.auto +++ b/webminlog/lang/mt.auto @@ -37,7 +37,6 @@ index_notify=Ibgħat email għal azzjonijiet Webmin? index_notify_mods=Għal azzjonijiet f'moduli index_notify_users=Għal azzjonijiet mill-utenti index_notify_email=Ibgħat email lil -index_notify_email_def=Default notification address index_notify_usub=Inkludi l-isem tal-utent fis-suġġett tal-email? index_notify_msub=Inkludi azzjoni fis-suġġett tal-email? index_searchtab=Fittex zkuk @@ -46,7 +45,8 @@ index_searchdesc=Din il-formola tista' tintuża biex tfittex azzjonijiet Webmin index_notifydesc=Uża din il-formola biex tikkonfigura notifiki bl-email meta l-azzjonijiet Webmin jitwettqu minn utenti magħżula jew f'moduli magħżula. search_title=Riżultati tat-Tiftix -search_datetime=Date and time +search_date=Data +search_time=Ħin search_user=Utent search_host=Indirizz tal-Klijent search_webmin=Webmin Server diff --git a/webminlog/lang/nl b/webminlog/lang/nl index ecdc3d403..9db2f5c0b 100644 --- a/webminlog/lang/nl +++ b/webminlog/lang/nl @@ -32,6 +32,8 @@ index_long=Toon de volledige actie omschrijvingen? index_global=<In geen enkele module> search_title=Zoek Resultaten +search_date=Datum +search_time=Tijd search_user=Gebruiker search_host=Cliënt Adres search_webmin=Webmin Server diff --git a/webminlog/lang/nl.auto b/webminlog/lang/nl.auto index 35d2dca6a..302e078c3 100644 --- a/webminlog/lang/nl.auto +++ b/webminlog/lang/nl.auto @@ -5,7 +5,6 @@ index_notify=E-mail verzenden voor Webmin-acties? index_notify_mods=Voor acties in modules index_notify_users=Voor acties door gebruikers index_notify_email=Stuur een email naar -index_notify_email_def=Default notification address index_notify_usub=Gebruikersnaam opnemen in e-mailonderwerp? index_notify_msub=Actie opnemen in e-mailonderwerp? index_searchtab=Logboeken zoeken @@ -13,7 +12,6 @@ index_notifytab=E-mail notificatie index_searchdesc=Dit formulier kan worden gebruikt om te zoeken naar Webmin-acties op gebruiker, module, datumbereik en uitgevoerde bestanden. index_notifydesc=Gebruik dit formulier om e-mailmeldingen te configureren wanneer Webmin-acties worden uitgevoerd door geselecteerde gebruikers of in gekozen modules. -search_datetime=Date and time search_global_failed=Aanmelden bij Webmin is mislukt : $1 search_global_expiredpass=Wachtwoord is verlopen search_global_wronguser=Ongeldige gebruiker diff --git a/webminlog/lang/no b/webminlog/lang/no index cc8630018..770d7b27a 100644 --- a/webminlog/lang/no +++ b/webminlog/lang/no @@ -32,6 +32,8 @@ index_long=Vis fulle beskrivelser for handlinger? index_global=<Ikke i noen modul> search_title=Søke resultat +search_date=Dato +search_time=Tid search_user=Bruker search_host=Klient adresse search_webmin=Webmin tjener diff --git a/webminlog/lang/no.auto b/webminlog/lang/no.auto index 210bdc8e1..8ed03f39f 100644 --- a/webminlog/lang/no.auto +++ b/webminlog/lang/no.auto @@ -5,7 +5,6 @@ index_notify=Vil du sende e-post for Webmin-handlinger? index_notify_mods=For handlinger i moduler index_notify_users=For handlinger fra brukere index_notify_email=Send e-post til -index_notify_email_def=Default notification address index_notify_usub=Vil du inkludere brukernavn i e-postemnet? index_notify_msub=Vil du inkludere handling i e-postemnet? index_searchtab=Søk i logger @@ -13,8 +12,6 @@ index_notifytab=E-postvarsel index_searchdesc=Dette skjemaet kan brukes til å søke etter Webmin-handlinger etter bruker, modul, datoperiode og utførte filer. index_notifydesc=Bruk dette skjemaet til å konfigurere e-postvarsler når Webmin-handlinger utføres av valgte brukere eller i valgte moduler. -search_datetime=Date and time - acl_notify=Kan konfigurere e-postvarsler? notify_err=Kunne ikke lagre varslingsalternativer diff --git a/webminlog/lang/pl b/webminlog/lang/pl index 3fb87cc19..4d2a588bd 100644 --- a/webminlog/lang/pl +++ b/webminlog/lang/pl @@ -32,6 +32,8 @@ index_long=Pokazywać pełne opisy zdarzeń? index_global=<W żadnym module> search_title=Wyniki poszukiwania +search_date=Data +search_time=Czas search_user=Użytkownik search_host=Adres IP klienta search_webmin=Serwer Webmina diff --git a/webminlog/lang/pl.auto b/webminlog/lang/pl.auto index 8379529f9..97a72693c 100644 --- a/webminlog/lang/pl.auto +++ b/webminlog/lang/pl.auto @@ -5,7 +5,6 @@ index_notify=Wysłać e-mail do działań Webmina? index_notify_mods=Do działań w modułach index_notify_users=Za działania użytkowników index_notify_email=Wyślij email do -index_notify_email_def=Default notification address index_notify_usub=Dołączyć nazwę użytkownika do tematu wiadomości e-mail? index_notify_msub=Zamieścić akcję w temacie e-maila? index_searchtab=Przeszukaj dzienniki @@ -13,7 +12,6 @@ index_notifytab=Powiadomienie e-mail index_searchdesc=Ten formularz może być używany do wyszukiwania działań Webmina według użytkownika, modułu, zakresu dat i plików, których dokonano. index_notifydesc=Użyj tego formularza, aby skonfigurować powiadomienia e-mail, gdy akcje Webmin są wykonywane przez wybranych użytkowników lub w wybranych modułach. -search_datetime=Date and time search_global_failed=Logowanie do Webmina nie powiodło się : $1 search_global_expiredpass=Hasło wygasło search_global_wronguser=Nieprawidłowy użytkownik diff --git a/webminlog/lang/pt.auto b/webminlog/lang/pt.auto index 3cdb7a080..1e721d64f 100644 --- a/webminlog/lang/pt.auto +++ b/webminlog/lang/pt.auto @@ -37,7 +37,6 @@ index_notify=Enviar e-mail para ações do Webmin? index_notify_mods=Para ações em módulos index_notify_users=Para ações de usuários index_notify_email=Enviar um email a -index_notify_email_def=Default notification address index_notify_usub=Incluir nome de usuário no assunto do e-mail? index_notify_msub=Incluir ação no assunto do email? index_searchtab=Pesquisar registros @@ -46,7 +45,8 @@ index_searchdesc=Este formulário pode ser usado para pesquisar as ações do We index_notifydesc=Use este formulário para configurar notificações por email quando ações do Webmin são executadas por usuários selecionados ou em módulos escolhidos. search_title=Procurar Resultados -search_datetime=Date and time +search_date=Encontro +search_time=Tempo search_user=Do utilizador search_host=Endereço do Cliente search_webmin=Servidor Webmin diff --git a/webminlog/lang/pt_BR b/webminlog/lang/pt_BR index de0e8913b..15791fb60 100644 --- a/webminlog/lang/pt_BR +++ b/webminlog/lang/pt_BR @@ -14,6 +14,8 @@ index_nolog=Nota - Log no Webmin não está habilitado n index_nologfiles=Nota - Log de mudanças em arquivos não está habilitado no momento, portanto é provável que os detalhes de ações logadas não incluam arquivos modificados ou comandos executados. search_title=Resultados da Busca +search_date=Data +search_time=Hora search_user=Usuário search_host=Endereço do cliente search_module=Módulo diff --git a/webminlog/lang/pt_BR.auto b/webminlog/lang/pt_BR.auto index ef5e9e05b..4ab50f6ad 100644 --- a/webminlog/lang/pt_BR.auto +++ b/webminlog/lang/pt_BR.auto @@ -23,7 +23,6 @@ index_notify=Enviar e-mail para ações do Webmin? index_notify_mods=Para ações em módulos index_notify_users=Para ações de usuários index_notify_email=Enviar um email a -index_notify_email_def=Default notification address index_notify_usub=Incluir nome de usuário no assunto do e-mail? index_notify_msub=Incluir ação no assunto do email? index_searchtab=Pesquisar registros @@ -31,7 +30,6 @@ index_notifytab=Notificação de Email index_searchdesc=Este formulário pode ser usado para pesquisar ações do Webmin por usuário, módulo, intervalo de datas e arquivos afetados. index_notifydesc=Use este formulário para configurar notificações por email quando ações do Webmin são executadas por usuários selecionados ou em módulos escolhidos. -search_datetime=Date and time search_webmin=Servidor Webmin search_none2=Nenhuma ação corresponde à sua pesquisa por ações search_critd=onde a descrição contém $1 diff --git a/webminlog/lang/ro.auto b/webminlog/lang/ro.auto index c55755a03..70224b880 100644 --- a/webminlog/lang/ro.auto +++ b/webminlog/lang/ro.auto @@ -37,7 +37,6 @@ index_notify=Trimiteți e-mail pentru acțiunile Webmin? index_notify_mods=Pentru acțiuni în module index_notify_users=Pentru acțiunile utilizatorilor index_notify_email=Trimite e-mail la -index_notify_email_def=Default notification address index_notify_usub=Includeți numele de utilizator în subiectul e-mailului? index_notify_msub=Includeți acțiunea în subiectul e-mailului? index_searchtab=Căutați jurnalele @@ -46,7 +45,8 @@ index_searchdesc=Acest formular poate fi folosit pentru a căuta acțiuni Webmin index_notifydesc=Utilizați acest formular pentru a configura notificările prin e-mail atunci când acțiunile Webmin sunt efectuate de utilizatori selectați sau în modulele alese. search_title=rezultatele cautarii -search_datetime=Date and time +search_date=Data +search_time=Timp search_user=Utilizator search_host=Adresa clientului search_webmin=Webmin Server diff --git a/webminlog/lang/ru b/webminlog/lang/ru index cc03e88d7..073703891 100644 --- a/webminlog/lang/ru +++ b/webminlog/lang/ru @@ -30,6 +30,8 @@ index_shost=Сервер Webmin источник index_global=<Никаком> search_title=Результаты поиска +search_date=Дата +search_time=Время search_user=Пользователь search_host=Адрес клиента search_webmin=Сервер Webmin diff --git a/webminlog/lang/ru.auto b/webminlog/lang/ru.auto index 073b72378..6841da988 100644 --- a/webminlog/lang/ru.auto +++ b/webminlog/lang/ru.auto @@ -7,7 +7,6 @@ index_notify=Отправить электронное письмо о дейс index_notify_mods=Для действий в модулях index_notify_users=За действия пользователей index_notify_email=Отправить электронное письмо на -index_notify_email_def=Default notification address index_notify_usub=Включить имя пользователя в тему письма? index_notify_msub=Включить действие в тему письма? index_searchtab=Журналы поиска @@ -15,7 +14,6 @@ index_notifytab=Уведомление по электронной почте index_searchdesc=Эта форма может использоваться для поиска действий Webmin по пользователю, модулю, диапазону дат и выполненным файлам. index_notifydesc=Используйте эту форму для настройки уведомлений по электронной почте, когда действия Webmin выполняются выбранными пользователями или в выбранных модулях. -search_datetime=Date and time search_critd=где описание содержит $1 search_global_failed=Ошибка входа в Webmin : $1 search_global_expiredpass=Срок действия пароля истек diff --git a/webminlog/lang/sk b/webminlog/lang/sk index a2997ae7c..f3ef14340 100644 --- a/webminlog/lang/sk +++ b/webminlog/lang/sk @@ -18,6 +18,8 @@ index_wall=Z ktoréhokoľvek serveru Webmina index_whost=Zo serveru search_title=Výsledky vyhľadávania +search_date=Dátum +search_time=Čas search_user=Užívateľ search_host=Adresa klienta search_webmin=Server Webmina diff --git a/webminlog/lang/sk.auto b/webminlog/lang/sk.auto index e9eb0c0e3..5aa18e091 100644 --- a/webminlog/lang/sk.auto +++ b/webminlog/lang/sk.auto @@ -19,7 +19,6 @@ index_notify=Chcete poslať e-mail na akcie Webmin? index_notify_mods=Pre akcie v moduloch index_notify_users=Pre akcie používateľov index_notify_email=Poslať email na -index_notify_email_def=Default notification address index_notify_usub=Zahrnúť používateľské meno do predmetu e-mailu? index_notify_msub=Zahrnúť akciu do predmetu e-mailu? index_searchtab=Hľadanie denníkov @@ -27,7 +26,6 @@ index_notifytab=Upozornenie e-mailom index_searchdesc=Tento formulár možno použiť na vyhľadávanie akcií Webmin podľa používateľa, modulu, rozsahu dátumov a vykonaných súborov. index_notifydesc=Tento formulár použite na konfiguráciu e-mailových upozornení, keď sú akcie Webminu vykonávané vybranými používateľmi alebo vo vybraných moduloch. -search_datetime=Date and time search_none2=Vyhľadávaniu akcií nezodpovedajú žiadne akcie search_critd=kde popis obsahuje $1 search_global=nikto diff --git a/webminlog/lang/sl.auto b/webminlog/lang/sl.auto index 2807711f8..3b4e3dbee 100644 --- a/webminlog/lang/sl.auto +++ b/webminlog/lang/sl.auto @@ -37,7 +37,6 @@ index_notify=Želite poslati e-pošto za dejanja Webmin? index_notify_mods=Za dejanja v modulih index_notify_users=Za dejanja uporabnikov index_notify_email=Pošlji e-pošto na -index_notify_email_def=Default notification address index_notify_usub=Želite vključiti uporabniško ime v zadevo e-pošte? index_notify_msub=Ali želite v zadevo e-pošte vključiti dejanje? index_searchtab=Išči dnevnike @@ -46,7 +45,8 @@ index_searchdesc=Ta obrazec se lahko uporablja za iskanje dejanj Webmin po upora index_notifydesc=Uporabite ta obrazec za konfiguriranje e-poštnih obvestil, ko dejanja Webmin izvajajo izbrani uporabniki ali v izbranih modulih. search_title=Rezultati iskanja -search_datetime=Date and time +search_date=Datum +search_time=Čas search_user=Uporabnik search_host=Naslov stranke search_webmin=Webmin strežnik diff --git a/webminlog/lang/sv b/webminlog/lang/sv index 5c87e38ad..32ae33de8 100644 --- a/webminlog/lang/sv +++ b/webminlog/lang/sv @@ -13,6 +13,8 @@ index_nolog=Obs - Loggning i Webmin är för tillfället index_nologfiles=Obs - Loggning av filändringar är för tillfället inte aktiverat, så ändrade filer och utförda kommandon kommer inte att komma med bland de loggade händelserna. search_title=Sökresultat +search_date=Datum +search_time=Tid search_user=Användare search_host=Klientadress search_module=Modul diff --git a/webminlog/lang/sv.auto b/webminlog/lang/sv.auto index 8a22c7267..0434e939e 100644 --- a/webminlog/lang/sv.auto +++ b/webminlog/lang/sv.auto @@ -24,7 +24,6 @@ index_notify=Skicka e-post för Webmin-åtgärder? index_notify_mods=För åtgärder i moduler index_notify_users=För handlingar av användare index_notify_email=Skicka e-post till -index_notify_email_def=Default notification address index_notify_usub=Inkludera användarnamn i e-postämnet? index_notify_msub=Inkludera åtgärder i e-postämnet? index_searchtab=Sök i loggar @@ -32,7 +31,6 @@ index_notifytab=E-postmeddelande index_searchdesc=Det här formuläret kan användas för att söka efter Webmin-åtgärder efter användare, modul, datumintervall och utförda filer. index_notifydesc=Använd det här formuläret för att konfigurera e-postmeddelanden när Webmin-åtgärder utförs av valda användare eller i valda moduler. -search_datetime=Date and time search_webmin=Webmin Server search_none2=Inga åtgärder matchade din sökning efter åtgärder search_critnu=av alla utom användare $1 diff --git a/webminlog/lang/th.auto b/webminlog/lang/th.auto index f4b6950fc..81eab633f 100644 --- a/webminlog/lang/th.auto +++ b/webminlog/lang/th.auto @@ -37,7 +37,6 @@ index_notify=ส่งอีเมลสำหรับการดำเนิ index_notify_mods=สำหรับการดำเนินการในโมดูล index_notify_users=สำหรับการดำเนินการโดยผู้ใช้ index_notify_email=ส่งอีเมล์ถึง -index_notify_email_def=Default notification address index_notify_usub=ใส่ชื่อผู้ใช้ในหัวเรื่องอีเมล? index_notify_msub=รวมการดำเนินการในเรื่องอีเมลหรือไม่ index_searchtab=บันทึกการค้นหา @@ -46,7 +45,8 @@ index_searchdesc=แบบฟอร์มนี้สามารถใช้เ index_notifydesc=ใช้แบบฟอร์มนี้เพื่อกำหนดค่าการแจ้งเตือนทางอีเมลเมื่อการกระทำของ Webmin ดำเนินการโดยผู้ใช้ที่เลือกหรือในโมดูลที่เลือก search_title=ผลการค้นหา -search_datetime=Date and time +search_date=วันที่ +search_time=เวลา search_user=ผู้ใช้งาน search_host=ที่อยู่ลูกค้า search_webmin=เซิร์ฟเวอร์ Webmin diff --git a/webminlog/lang/tr b/webminlog/lang/tr index 145fd13e2..1e1923ced 100644 --- a/webminlog/lang/tr +++ b/webminlog/lang/tr @@ -18,6 +18,8 @@ index_wall=Herhangi bir Webmin sunucudan index_whost=Bu sunucudan search_title=Arama Sonuçları +search_date=Zaman +search_time=Saat search_user=Kullanıcı search_host=İstemci Adresi search_webmin=Webmin Sunucusu diff --git a/webminlog/lang/tr.auto b/webminlog/lang/tr.auto index bc9521529..fd7dbec5b 100644 --- a/webminlog/lang/tr.auto +++ b/webminlog/lang/tr.auto @@ -19,7 +19,6 @@ index_notify=Webmin eylemleri için e-posta gönderilsin mi? index_notify_mods=Modüllerdeki eylemler için index_notify_users=Kullanıcıların eylemleri için index_notify_email=Email gönder -index_notify_email_def=Default notification address index_notify_usub=Kullanıcı adı e-posta konusuna dahil edilsin mi? index_notify_msub=Eylem e-posta konusuna dahil edilsin mi? index_searchtab=Arama günlükleri @@ -27,7 +26,6 @@ index_notifytab=Eposta bildirimi index_searchdesc=Bu form, kullanıcı, modül, tarih aralığı ve gerçekleştirilen dosyalara göre Webmin eylemlerini aramak için kullanılabilir. index_notifydesc=Webmin eylemleri seçilen kullanıcılar veya seçilen modüller tarafından gerçekleştirildiğinde e-posta bildirimlerini yapılandırmak için bu formu kullanın. -search_datetime=Date and time search_none2=İşlem aramanızla eşleşen işlem yok search_critd=burada açıklama $1 search_global=Yok diff --git a/webminlog/lang/uk b/webminlog/lang/uk index 0325e88eb..a007a9e71 100644 --- a/webminlog/lang/uk +++ b/webminlog/lang/uk @@ -14,6 +14,8 @@ index_nolog=Примітка - Ведення журналу index_nologfiles=Примітка - Ведення журналу змін у файлах у даний момент відключено, тому подробиці зроблених дій не будуть містити в собі змінені файли і виконані команди. search_title=Результати пошуку +search_date=Дата +search_time=Час search_user=Користувач search_host=Адреса клієнта search_module=Модуль diff --git a/webminlog/lang/uk.auto b/webminlog/lang/uk.auto index 2982c1306..2984ad56e 100644 --- a/webminlog/lang/uk.auto +++ b/webminlog/lang/uk.auto @@ -23,7 +23,6 @@ index_notify=Надіслати електронний лист для дій We index_notify_mods=Для дій у модулях index_notify_users=За дії користувачів index_notify_email=Надіслати електронний лист на адресу -index_notify_email_def=Default notification address index_notify_usub=Включити ім’я користувача в тему електронного листа? index_notify_msub=Включити дію в тему електронного листа? index_searchtab=Журнали пошуку @@ -31,7 +30,6 @@ index_notifytab=Повідомлення електронною поштою index_searchdesc=Цю форму можна використовувати для пошуку дій Webmin за користувачем, модулем, діапазоном дат і виконаними файлами. index_notifydesc=Використовуйте цю форму, щоб налаштувати сповіщення електронною поштою, коли дії Webmin виконують вибрані користувачі або у вибраних модулях. -search_datetime=Date and time search_webmin=Веб-сервер search_none2=Жодна дія не відповідає вашому пошуку дій search_critd=де опис містить $1 diff --git a/webminlog/lang/ur.auto b/webminlog/lang/ur.auto index 7a6dda280..b8a831f19 100644 --- a/webminlog/lang/ur.auto +++ b/webminlog/lang/ur.auto @@ -37,7 +37,6 @@ index_notify=Webmin ایکشنز کے لیے ای میل بھیجیں؟ index_notify_mods=ماڈیولز میں کارروائیوں کے لیے index_notify_users=صارفین کے اعمال کے لیے index_notify_email=کو ای میل بھیجیں۔ -index_notify_email_def=Default notification address index_notify_usub=ای میل کے مضمون میں صارف نام شامل کریں؟ index_notify_msub=ای میل کے مضمون میں کارروائی شامل کریں؟ index_searchtab=لاگز تلاش کریں۔ @@ -46,7 +45,8 @@ index_searchdesc=اس فارم کا استعمال صارف، ماڈیول، ت index_notifydesc=اس فارم کو ای میل اطلاعات کو ترتیب دینے کے لیے استعمال کریں جب Webmin کی کارروائیاں منتخب صارفین یا منتخب ماڈیولز میں انجام دیں۔ search_title=تلاش کے نتائج -search_datetime=Date and time +search_date=تاریخ +search_time=وقت search_user=صارف search_host=مؤکل کا پتہ search_webmin=ویبمین سرور diff --git a/webminlog/lang/vi.auto b/webminlog/lang/vi.auto index bed2c9ac0..00e50959f 100644 --- a/webminlog/lang/vi.auto +++ b/webminlog/lang/vi.auto @@ -37,7 +37,6 @@ index_notify=Gửi email cho các hành động Webmin? index_notify_mods=Đối với các hành động trong mô-đun index_notify_users=Đối với các hành động của người dùng index_notify_email=Gửi email đến -index_notify_email_def=Default notification address index_notify_usub=Bao gồm tên người dùng trong chủ đề email? index_notify_msub=Bao gồm hành động trong chủ đề email? index_searchtab=Tìm kiếm nhật ký @@ -46,7 +45,8 @@ index_searchdesc=Biểu mẫu này có thể được sử dụng để tìm ki index_notifydesc=Sử dụng biểu mẫu này để định cấu hình thông báo qua email khi các hành động Webmin được thực hiện bởi những người dùng được chọn hoặc trong các mô-đun đã chọn. search_title=kết quả tìm kiếm -search_datetime=Date and time +search_date=Ngày +search_time=Thời gian search_user=Người sử dụng search_host=Địa chỉ khách hàng search_webmin=Máy chủ Webmin diff --git a/webminlog/lang/zh b/webminlog/lang/zh index 3ed429545..deb63b6a6 100644 --- a/webminlog/lang/zh +++ b/webminlog/lang/zh @@ -45,6 +45,8 @@ index_searchdesc=此表单可用于按用户、模块、日期范围和受影响 index_notifydesc=使用此表单配置当 Webmin 操作由选定用户或在选定模块中执行时的电子邮件通知。 search_title=搜索结果 +search_date=日期 +search_time=时间 search_user=用户 search_host=客户端地址 search_webmin=Webmin 服务器 diff --git a/webminlog/lang/zh.auto b/webminlog/lang/zh.auto deleted file mode 100644 index e3682d741..000000000 --- a/webminlog/lang/zh.auto +++ /dev/null @@ -1,3 +0,0 @@ -index_notify_email_def=Default notification address - -search_datetime=Date and time diff --git a/webminlog/lang/zh_TW b/webminlog/lang/zh_TW index 111af84c4..0d8d2ee65 100644 --- a/webminlog/lang/zh_TW +++ b/webminlog/lang/zh_TW @@ -14,6 +14,8 @@ index_nolog=注意 - 紀錄Webmin 目前沒有啟用， index_nologfiles=注意 - 紀錄檔案變更目前沒有啟用，所以詳細紀錄動作將不會包含檔案變更和執行命令 search_title=搜尋結果 +search_date=日期 +search_time=時間 search_user=使用者 search_host=使用者地址 search_module=模組 diff --git a/webminlog/lang/zh_TW.auto b/webminlog/lang/zh_TW.auto index bf2ac4d86..c4bb14603 100644 --- a/webminlog/lang/zh_TW.auto +++ b/webminlog/lang/zh_TW.auto @@ -23,7 +23,6 @@ index_notify=為 Webmin 操作發送電子郵件？ index_notify_mods=對於模塊中的操作 index_notify_users=對於用戶的操作 index_notify_email=發送電子郵件至 -index_notify_email_def=Default notification address index_notify_usub=在電子郵件主題中包含用戶名？ index_notify_msub=在電子郵件主題中包含操作？ index_searchtab=搜索日誌 @@ -31,7 +30,6 @@ index_notifytab=電子郵件通知 index_searchdesc=此表單可用於按用戶、模塊、日期範圍和受影響的文件搜索 Webmin 操作。 index_notifydesc=當選定用戶或選定模塊執行 Webmin 操作時，使用此表單配置電子郵件通知。 -search_datetime=Date and time search_webmin=Webmin服務器 search_none2=沒有動作符合您對動作的搜索 search_critd=描述包含$1 diff --git a/xinetd/lang/de b/xinetd/lang/de index 7de80059f..66a35ea5f 100644 --- a/xinetd/lang/de +++ b/xinetd/lang/de @@ -134,4 +134,4 @@ log_enable_l=Aktivierte Dienste $1 log_disable_l=Deaktivierte Dienste $1 config_dirdef=Xinetd-Konfigurationsdatei -config_dirto=Neue Datei im Verzeichnis +config_dirto=Neue Datei im Verzeichnis \ No newline at end of file diff --git a/xterm/lang/af.auto b/xterm/lang/af.auto index c24151f38..1e45bba55 100644 --- a/xterm/lang/af.auto +++ b/xterm/lang/af.auto @@ -5,8 +5,6 @@ index_suse=Die Perl-pakket perl-IO-Tty ontbreek, en moet eers met die h index_euser=Fout: Gebruiker $1 kan nie die dop laat loop nie, aangesien dit nie bestaan nie! index_connecting=Koppel aan .. index_missing=Die Perl-module $1 ontbreek. Jy moet jou administrateur kontak om hierdie probleem op te los. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Begin dop as Unix-gebruiker acl_sameuser=Dieselfde as Webmin-aanmelding -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/ar.auto b/xterm/lang/ar.auto index ee61416d0..f6a89eb42 100644 --- a/xterm/lang/ar.auto +++ b/xterm/lang/ar.auto @@ -5,8 +5,6 @@ index_suse=حزمة Perl perl-IO-Tty مفقودة ، ويجب تثبي index_euser=خطأ: لا يمكن للمستخدم$1 تشغيل shell لأنه غير موجود! index_connecting=توصيل .. index_missing=وحدة Perl $1 مفقودة. تحتاج إلى الاتصال بالمسؤول لحل هذه المشكلة. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=قم بتشغيل shell كمستخدم Unix acl_sameuser=مثل تسجيل الدخول إلى Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/be.auto b/xterm/lang/be.auto index 6554eba69..22467d98f 100644 --- a/xterm/lang/be.auto +++ b/xterm/lang/be.auto @@ -5,8 +5,6 @@ index_suse=Пакет Perl perl-IO-Tty адсутнічае, і яго index_euser=Памылка: карыстальнік $1 не можа запусціць абалонку, бо яна не існуе! index_connecting=Падключэнне .. index_missing=Модуль Perl $1 адсутнічае. Вам трэба звярнуцца да адміністратара, каб вырашыць гэтую праблему. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Запусціце абалонку ад імя карыстальніка Unix acl_sameuser=Тое самае, што і ўваход у Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/bg.auto b/xterm/lang/bg.auto index ba7bf00dd..9c8ee91fd 100644 --- a/xterm/lang/bg.auto +++ b/xterm/lang/bg.auto @@ -5,8 +5,6 @@ index_suse=Пакетът Perl perl-IO-Tty липсва и трябва index_euser=Грешка: Потребител $1 не може да стартира обвивката, тъй като тя не съществува! index_connecting=Свързване .. index_missing=Модулът на Perl $1 липсва. Трябва да се свържете с вашия администратор, за да разрешите този проблем. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Стартирайте shell като Unix потребител acl_sameuser=Същото като влизане в Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/ca.auto b/xterm/lang/ca.auto index f580339af..de44f19c9 100644 --- a/xterm/lang/ca.auto +++ b/xterm/lang/ca.auto @@ -5,8 +5,6 @@ index_suse=Falta el paquet Perl perl-IO-Tty i primer s'ha d'instal·lar index_euser=Error: l'usuari $1 no pot executar l'intèrpret d'ordres perquè no existeix! index_connecting=Connectant .. index_missing=Falta el mòdul Perl $1. Heu de contactar amb el vostre administrador per resoldre aquest problema. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Executeu shell com a usuari Unix acl_sameuser=Igual que l'inici de sessió de Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/cs.auto b/xterm/lang/cs.auto index 11a6cf53f..53483efa3 100644 --- a/xterm/lang/cs.auto +++ b/xterm/lang/cs.auto @@ -5,8 +5,6 @@ index_suse=Balíček Perl perl-IO-Tty chybí a měl by být nejprve ru index_euser=Chyba: Uživatel $1 nemůže spustit shell, protože neexistuje! index_connecting=Připojování .. index_missing=Chybí modul Perl $1. Chcete-li tento problém vyřešit, musíte se obrátit na správce. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Spusťte shell jako uživatel Unixu acl_sameuser=Stejné jako přihlášení do Webminu -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/da.auto b/xterm/lang/da.auto index 75dbda756..32e585f59 100644 --- a/xterm/lang/da.auto +++ b/xterm/lang/da.auto @@ -5,8 +5,6 @@ index_suse=Perl-pakken perl-IO-Tty mangler og bør først installeres m index_euser=Fejl: Bruger $1 kan ikke køre skallen, da den ikke eksisterer! index_connecting=Tilslutning .. index_missing=Perl-modulet $1 mangler. Du skal kontakte din administrator for at løse dette problem. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Kør shell som Unix-bruger acl_sameuser=Samme som Webmin login -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/de b/xterm/lang/de index ec48a606d..7ba33b843 100644 --- a/xterm/lang/de +++ b/xterm/lang/de @@ -9,3 +9,4 @@ index_eproxy=Das Terminal-Modul kann nicht verwendet werden, wenn auf Webmin üb acl_user=Shell als Unix-Benutzer ausführen acl_sameuser=Gleich wie Webmin-Anmeldung +acl_sudoenforce Sudo-Only-Berechtigungen durchsetzen \ No newline at end of file diff --git a/xterm/lang/de.auto b/xterm/lang/de.auto deleted file mode 100644 index d20bce949..000000000 --- a/xterm/lang/de.auto +++ /dev/null @@ -1 +0,0 @@ -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/el.auto b/xterm/lang/el.auto index 6fb131ea8..b4b2474d7 100644 --- a/xterm/lang/el.auto +++ b/xterm/lang/el.auto @@ -5,8 +5,6 @@ index_suse=Το πακέτο Perl perl-IO-Tty λείπει και θα index_euser=Σφάλμα : Ο χρήστης $1 δεν μπορεί να εκτελέσει το κέλυφος καθώς δεν υπάρχει! index_connecting=Σύνδεση .. index_missing=Η λειτουργική μονάδα Perl $1 λείπει. Πρέπει να επικοινωνήσετε με τον διαχειριστή σας για να επιλύσετε αυτό το ζήτημα. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Εκτελέστε το κέλυφος ως χρήστης Unix acl_sameuser=Το ίδιο με τη σύνδεση στο Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/es.auto b/xterm/lang/es.auto index 4749a090f..66f0a7d9c 100644 --- a/xterm/lang/es.auto +++ b/xterm/lang/es.auto @@ -5,8 +5,6 @@ index_suse=Falta el paquete Perl perl-IO-Tty, y debe instalarse manualm index_euser=Error: ¡El usuario $1 no puede ejecutar el shell porque no existe! index_connecting=Conectando .. index_missing=Falta el módulo Perl $1. Debe ponerse en contacto con su administrador para resolver este problema. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Ejecutar shell como usuario de Unix acl_sameuser=Igual que el inicio de sesión de Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/eu.auto b/xterm/lang/eu.auto index 3ae094226..686fa578b 100644 --- a/xterm/lang/eu.auto +++ b/xterm/lang/eu.auto @@ -5,8 +5,6 @@ index_suse=Perl paketea perl-IO-Tty falta da, eta eskuz instalatu behar index_euser=Errorea: $1 erabiltzaileak ezin du shell-a exekutatu, ez baitago! index_connecting=Konektatzen .. index_missing=Perl modulua $1 falta da. Zure administratzailearekin harremanetan jarri behar duzu arazo hau konpontzeko. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Exekutatu shell Unix erabiltzaile gisa acl_sameuser=Webmin-en saioaren berdina -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/fa.auto b/xterm/lang/fa.auto index 3bd908b34..2ac21caa6 100644 --- a/xterm/lang/fa.auto +++ b/xterm/lang/fa.auto @@ -5,8 +5,6 @@ index_suse=بسته Perl perl-IO-Tty وجود ندارد و باید ا index_euser=خطا : کاربر $1 نمی تواند پوسته را اجرا کند زیرا وجود ندارد! index_connecting=برقراری ارتباط .. index_missing=ماژول پرل $1 وجود ندارد. برای حل این مشکل باید با سرپرست خود تماس بگیرید. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=شل را به عنوان کاربر یونیکس اجرا کنید acl_sameuser=مانند ورود به وبمین -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/fi.auto b/xterm/lang/fi.auto index a0ed69925..ce71244b5 100644 --- a/xterm/lang/fi.auto +++ b/xterm/lang/fi.auto @@ -5,8 +5,6 @@ index_suse=Perl-paketti perl-IO-Tty puuttuu, ja se tulee asentaa ensin index_euser=Virhe : Käyttäjä $1 ei voi suorittaa komentotulkkia, koska sitä ei ole olemassa! index_connecting=Yhdistetään .. index_missing=Perl-moduuli $1 puuttuu. Sinun on otettava yhteyttä järjestelmänvalvojaasi tämän ongelman ratkaisemiseksi. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Suorita shell Unix-käyttäjänä acl_sameuser=Sama kuin Webminin kirjautuminen -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/fr.auto b/xterm/lang/fr.auto index cb892cf51..a86335c60 100644 --- a/xterm/lang/fr.auto +++ b/xterm/lang/fr.auto @@ -5,8 +5,6 @@ index_suse=Le package Perl perl-IO-Tty est manquant et doit d'abord êt index_euser=Erreur : l'utilisateur $1 ne peut pas exécuter le shell car il n'existe pas ! index_connecting=Connexion .. index_missing=Le module Perl $1 est manquant. Vous devez contacter votre administrateur pour résoudre ce problème. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Exécuter le shell en tant qu'utilisateur Unix acl_sameuser=Identique à la connexion Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/he.auto b/xterm/lang/he.auto index 72380ed65..c5ebd25e0 100644 --- a/xterm/lang/he.auto +++ b/xterm/lang/he.auto @@ -5,8 +5,6 @@ index_suse=חבילת Perl perl-IO-Tty חסרה, ויש להתקין ת index_euser=שגיאה: המשתמש $1 לא יכול להפעיל את המעטפת מכיוון שהיא לא קיימת! index_connecting=מתחבר .. index_missing=מודול Perl $1 חסר. עליך לפנות למנהל המערכת שלך כדי לפתור בעיה זו. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=הפעל מעטפת כמשתמש יוניקס acl_sameuser=זהה לכניסה ל-Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/hr.auto b/xterm/lang/hr.auto index 0be27f7cc..1d5a23618 100644 --- a/xterm/lang/hr.auto +++ b/xterm/lang/hr.auto @@ -5,8 +5,6 @@ index_suse=Nedostaje Perl paket perl-IO-Tty i treba ga prvo ručno inst index_euser=Pogreška: Korisnik $1 ne može pokrenuti ljusku jer ona ne postoji! index_connecting=Povezivanje .. index_missing=Nedostaje Perl modul $1. Morate kontaktirati svog administratora kako biste riješili ovaj problem. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Pokrenite shell kao Unix korisnik acl_sameuser=Isto kao prijava na Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/hu.auto b/xterm/lang/hu.auto index 5698a9b16..acb268893 100644 --- a/xterm/lang/hu.auto +++ b/xterm/lang/hu.auto @@ -5,8 +5,6 @@ index_suse=A perl-IO-Tty Perl csomag hiányzik, ezért először manuá index_euser=Hiba: $1 felhasználó nem tudja futtatni a parancsértelmezőt, mert nem létezik! index_connecting=Csatlakozás. .. index_missing=A $1 Perl modul hiányzik. A probléma megoldásához kapcsolatba kell lépnie a rendszergazdával. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Futtassa a shell-t Unix felhasználóként acl_sameuser=Ugyanaz, mint a Webmin bejelentkezésnél -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/it.auto b/xterm/lang/it.auto index 7ffec9f63..eff1c2b6d 100644 --- a/xterm/lang/it.auto +++ b/xterm/lang/it.auto @@ -5,8 +5,6 @@ index_suse=Il pacchetto Perl perl-IO-Tty è mancante e dovrebbe essere index_euser=Errore: l'utente $1 non può eseguire la shell perché non esiste! index_connecting=Collegamento .. index_missing=Manca il modulo Perl $1. Devi contattare il tuo amministratore per risolvere questo problema. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Esegui shell come utente Unix acl_sameuser=Come per l'accesso Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/ja.auto b/xterm/lang/ja.auto index 92fd1c1af..37f072412 100644 --- a/xterm/lang/ja.auto +++ b/xterm/lang/ja.auto @@ -5,8 +5,6 @@ index_suse=Perl パッケージ perl-IO-Tty がありません。最初 index_euser=エラー : ユーザー $1 はシェルが存在しないため実行できません! index_connecting=接続中 .. index_missing=Perl モジュール $1 が見つかりません。この問題を解決するには、管理者に連絡する必要があります。 -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Unix ユーザーとしてシェルを実行する acl_sameuser=Webmin ログインと同じ -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/ko.auto b/xterm/lang/ko.auto index 552f31c69..224b286e6 100644 --- a/xterm/lang/ko.auto +++ b/xterm/lang/ko.auto @@ -5,8 +5,6 @@ index_suse=Perl 패키지 perl-IO-Tty가 없습니다. 먼저 sudo-only privileges diff --git a/xterm/lang/nl.auto b/xterm/lang/nl.auto index 6afbf5fbc..752bac967 100644 --- a/xterm/lang/nl.auto +++ b/xterm/lang/nl.auto @@ -5,8 +5,6 @@ index_suse=Het Perl-pakket perl-IO-Tty ontbreekt en moet eerst handmati index_euser=Fout: Gebruiker $1 kan de shell niet uitvoeren omdat deze niet bestaat! index_connecting=Verbinden .. index_missing=De Perl-module $1 ontbreekt. U moet contact opnemen met uw beheerder om dit probleem op te lossen. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Voer shell uit als Unix-gebruiker acl_sameuser=Hetzelfde als inloggen bij Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/no.auto b/xterm/lang/no.auto index 8139cf4a4..4fc5805b2 100644 --- a/xterm/lang/no.auto +++ b/xterm/lang/no.auto @@ -5,8 +5,6 @@ index_suse=Perl-pakken perl-IO-Tty mangler, og bør først installeres index_euser=Feil: Bruker $1 kan ikke kjøre skallet siden det ikke eksisterer! index_connecting=Kobler til .. index_missing=Perl-modulen $1 mangler. Du må kontakte administratoren din for å løse dette problemet. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Kjør shell som Unix-bruker acl_sameuser=Samme som Webmin-pålogging -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/pl.auto b/xterm/lang/pl.auto index 986fa7239..3a459a59b 100644 --- a/xterm/lang/pl.auto +++ b/xterm/lang/pl.auto @@ -5,8 +5,6 @@ index_suse=Brakuje pakietu Perl perl-IO-Tty i należy go najpierw ręcz index_euser=Błąd: Użytkownik $1 nie może uruchomić powłoki, ponieważ ona nie istnieje! index_connecting=Podłączanie .. index_missing=Brak modułu Perla $1. Aby rozwiązać ten problem, musisz skontaktować się z administratorem. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Uruchom powłokę jako użytkownik Unix acl_sameuser=Tak samo jak logowanie do Webmina -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/pt.auto b/xterm/lang/pt.auto index ea4f61a87..31cbad68c 100644 --- a/xterm/lang/pt.auto +++ b/xterm/lang/pt.auto @@ -5,8 +5,6 @@ index_suse=O pacote Perl perl-IO-Tty está ausente e deve ser instalado index_euser=Erro: O usuário $1 não pode executar o shell porque ele não existe! index_connecting=Conectando .. index_missing=O módulo Perl $1 está ausente. Você precisa entrar em contato com o administrador para resolver esse problema. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Executar shell como usuário Unix acl_sameuser=Igual ao login do Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/pt_BR.auto b/xterm/lang/pt_BR.auto index ea4f61a87..31cbad68c 100644 --- a/xterm/lang/pt_BR.auto +++ b/xterm/lang/pt_BR.auto @@ -5,8 +5,6 @@ index_suse=O pacote Perl perl-IO-Tty está ausente e deve ser instalado index_euser=Erro: O usuário $1 não pode executar o shell porque ele não existe! index_connecting=Conectando .. index_missing=O módulo Perl $1 está ausente. Você precisa entrar em contato com o administrador para resolver esse problema. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Executar shell como usuário Unix acl_sameuser=Igual ao login do Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/ro.auto b/xterm/lang/ro.auto index b4f7973ab..60ebbacda 100644 --- a/xterm/lang/ro.auto +++ b/xterm/lang/ro.auto @@ -5,8 +5,6 @@ index_suse=Pachetul Perl perl-IO-Tty lipsește și ar trebui să fie in index_euser=Eroare: utilizatorul $1 nu poate rula shell-ul deoarece nu există! index_connecting=Conectare .. index_missing=Modulul Perl $1 lipsește. Trebuie să contactați administratorul pentru a rezolva această problemă. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Rulați shell ca utilizator Unix acl_sameuser=La fel ca autentificarea Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/ru.auto b/xterm/lang/ru.auto index 12a4d6d62..ecd93027b 100644 --- a/xterm/lang/ru.auto +++ b/xterm/lang/ru.auto @@ -5,8 +5,6 @@ index_suse=Пакет Perl perl-IO-Tty отсутствует и дол index_euser=Ошибка: пользователь $1 не может запустить оболочку, так как ее не существует! index_connecting=Подключение .. index_missing=Модуль Perl $1 отсутствует. Вам необходимо связаться с вашим администратором, чтобы решить эту проблему. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Запустить оболочку от имени пользователя Unix acl_sameuser=То же, что и вход в Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/sk.auto b/xterm/lang/sk.auto index a4ec78f2d..7034f23b6 100644 --- a/xterm/lang/sk.auto +++ b/xterm/lang/sk.auto @@ -5,8 +5,6 @@ index_suse=Balík Perl perl-IO-Tty chýba a mal by byť najprv manuáln index_euser=Chyba: Používateľ $1 nemôže spustiť shell, pretože neexistuje! index_connecting=Pripája sa .. index_missing=Chýba modul Perl $1. Ak chcete tento problém vyriešiť, musíte sa obrátiť na správcu. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Spustite shell ako používateľ Unixu acl_sameuser=Rovnaké ako prihlásenie Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/sl.auto b/xterm/lang/sl.auto index af5a03452..86c0f6c34 100644 --- a/xterm/lang/sl.auto +++ b/xterm/lang/sl.auto @@ -5,8 +5,6 @@ index_suse=Paket Perl perl-IO-Tty manjka in ga je treba najprej ročno index_euser=Napaka: Uporabnik $1 ne more zagnati lupine, ker ne obstaja! index_connecting=Povezovanje .. index_missing=Modul Perl $1 manjka. Za rešitev te težave se morate obrniti na skrbnika. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Zaženi lupino kot uporabnik Unixa acl_sameuser=Enako kot prijava v Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/sv.auto b/xterm/lang/sv.auto index 20a53053b..ec9fc2842 100644 --- a/xterm/lang/sv.auto +++ b/xterm/lang/sv.auto @@ -5,8 +5,6 @@ index_suse=Perl-paketet perl-IO-Tty saknas och bör installeras manuell index_euser=Fel: Användaren $1 kan inte köra skalet eftersom det inte finns! index_connecting=Ansluter .. index_missing=Perl-modulen $1 saknas. Du måste kontakta din administratör för att lösa problemet. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Kör skal som Unix-användare acl_sameuser=Samma som Webmin-inloggning -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/th.auto b/xterm/lang/th.auto index bb7bbcb28..b96a474c5 100644 --- a/xterm/lang/th.auto +++ b/xterm/lang/th.auto @@ -5,8 +5,6 @@ index_suse=ไม่มีแพ็กเกจ Perl perl-IO-Tty แล index_euser=ข้อผิดพลาด: ผู้ใช้ $1 ไม่สามารถเรียกใช้เชลล์ได้เนื่องจากไม่มีอยู่! index_connecting=กำลังเชื่อมต่อ .. index_missing=โมดูล Perl $1 หายไป คุณต้องติดต่อผู้ดูแลระบบของคุณเพื่อแก้ไขปัญหานี้ -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=เรียกใช้เชลล์ในฐานะผู้ใช้ Unix acl_sameuser=เช่นเดียวกับการเข้าสู่ระบบ Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/tr.auto b/xterm/lang/tr.auto index 926e5906e..94a1ff984 100644 --- a/xterm/lang/tr.auto +++ b/xterm/lang/tr.auto @@ -5,8 +5,6 @@ index_suse=Perl-IO-Tty Perl paketi eksik ve önce sudo-only privileges diff --git a/xterm/lang/uk.auto b/xterm/lang/uk.auto index 8c4c5463f..ff81f852a 100644 --- a/xterm/lang/uk.auto +++ b/xterm/lang/uk.auto @@ -5,8 +5,6 @@ index_suse=Пакет Perl perl-IO-Tty відсутній, його с index_euser=Помилка: користувач $1 не може запустити оболонку, оскільки її не існує! index_connecting=Підключення .. index_missing=Модуль Perl $1 відсутній. Вам потрібно зв’язатися з адміністратором, щоб вирішити цю проблему. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Запустіть оболонку від імені користувача Unix acl_sameuser=Те саме, що і вхід у Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/ur.auto b/xterm/lang/ur.auto index e61b607f7..744cdfcfe 100644 --- a/xterm/lang/ur.auto +++ b/xterm/lang/ur.auto @@ -5,8 +5,6 @@ index_suse=The Perl package perl-IO-Tty is missing, and should be manua index_euser=خرابی: صارف $1 شیل کو نہیں چلا سکتا کیونکہ یہ موجود نہیں ہے! index_connecting=جڑ رہا ہے .. index_missing=The Perl module $1 is missing. You need to contact your administrator to resolve this issue. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=شیل کو یونکس صارف کے طور پر چلائیں۔ acl_sameuser=Webmin لاگ ان کی طرح -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/vi.auto b/xterm/lang/vi.auto index fac2c4a43..f0c30a089 100644 --- a/xterm/lang/vi.auto +++ b/xterm/lang/vi.auto @@ -5,8 +5,6 @@ index_suse=Gói Perl perl-IO-Tty bị thiếu và phải được cài index_euser=Lỗi: Người dùng $1 không thể chạy shell vì nó không tồn tại! index_connecting=Đang kết nối .. index_missing=Thiếu mô-đun Perl $1. Bạn cần liên hệ với quản trị viên của mình để giải quyết vấn đề này. -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=Chạy shell với tư cách người dùng Unix acl_sameuser=Giống như đăng nhập Webmin -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/zh.auto b/xterm/lang/zh.auto index 37ab3af3d..660820988 100644 --- a/xterm/lang/zh.auto +++ b/xterm/lang/zh.auto @@ -5,8 +5,6 @@ index_suse=缺少 Perl 包 perl-IO-Tty，应首先从 $1 丢失。您需要联系您的管理员来解决此问题。 -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=以 Unix 用户身份运行 shell acl_sameuser=与 Webmin 登录相同 -acl_sudoenforce=Enforce sudo-only privileges diff --git a/xterm/lang/zh_TW.auto b/xterm/lang/zh_TW.auto index 3cf73bee7..d6ea8b7fa 100644 --- a/xterm/lang/zh_TW.auto +++ b/xterm/lang/zh_TW.auto @@ -5,8 +5,6 @@ index_suse=缺少 Perl 包 perl-IO-Tty，應首先從 $1 丟失。您需要聯繫您的管理員來解決此問題。 -index_eproxy=The Terminal module cannot be used when accessing Webmin via another Webmin server acl_user=以 Unix 用戶身份運行 shell acl_sameuser=與 Webmin 登錄相同 -acl_sudoenforce=Enforce sudo-only privileges diff --git a/zones/lang/de b/zones/lang/de index 7fe8a7d97..9a927660e 100644 --- a/zones/lang/de +++ b/zones/lang/de @@ -69,7 +69,6 @@ reboot_title=Zone neu starten reboot_rusure=Sind Sie sicher, dass Sie die Zone $1 neu starten möchten? Alle darin laufenden Prozesse werden neu gestartet. reboot_err=Fehler beim Neustart der Zone reboot_doing=Zone wird jetzt neu gestartet .. - reboot_failed=.. fehlgeschlagen: reboot_ok=.. abgeschlossen. @@ -81,6 +80,7 @@ halt_doing=Zone wird jetzt heruntergefahren .. boot_title=Zone starten boot_err=Fehler beim Starten der Zone boot_doing=Zone wird jetzt gestartet .. + delete_title=Zone löschen delete_rusure=Sind Sie sicher, dass Sie die Zone $1 löschen möchten? Alle Dateien in ihren privaten Dateisystemen gehen verloren. delete_err=Fehler beim Löschen der Zone @@ -93,6 +93,7 @@ uninstall_doing=System wird jetzt aus der Zone deinstalliert .. install_title=System installieren install_doing=System wird jetzt in der Zone installiert .. + net_title1=Netzwerkschnittstelle erstellen net_title2=Netzwerkschnittstelle bearbeiten net_header=Details der virtuellen Zonenschnittstelle @@ -283,4 +284,4 @@ log_delete_attr=Generisches Attribut $1 in Zone $2 gelöscht webmin_eperl=Perl ist nicht unter $1 installiert webmin_eroot=Das Verzeichnis $1 existiert nicht oder enthält kein Webmin. -webmin_title=Webmin installieren +webmin_title=Webmin installieren \ No newline at end of file