diff --git a/menu/pgui/templates/index.php b/menu/pgui/templates/index.php
index 059e10d..037e86b 100644
--- a/menu/pgui/templates/index.php
+++ b/menu/pgui/templates/index.php
@@ -142,7 +142,7 @@ a:visited {
diff --git a/menu/pgui/templates/mountcheck.sh b/menu/pgui/templates/mountcheck.sh
index b21550f..6cc8dda 100644
--- a/menu/pgui/templates/mountcheck.sh
+++ b/menu/pgui/templates/mountcheck.sh
@@ -109,11 +109,11 @@ while true; do
fi
##### Warning for Ports Open with Traefik Deployed
if [[ $(cat /var/plexguide/pg.ports) != "Closed" && $(docker ps --format '{{.Names}}' | grep "traefik") == "traefik" ]]; then
- echo "Warning: Traefik deployed with ports open! Server at risk for explotation!" >/opt/appdata/plexguide/emergency/message.a
+ echo "Warning: Traefik has been deployed with ports open! Server is at risk for exploitation!" >/opt/appdata/plexguide/emergency/message.a
elif [[ -e "/opt/appdata/plexguide/emergency/message.a" ]]; then rm -rf /opt/appdata/plexguide/emergency/message.a; fi
if [[ $(cat /var/plexguide/pg.ports) == "Closed" && $(docker ps --format '{{.Names}}' | grep "traefik") == "" ]]; then
- echo "Warning: Apps Cannot Be Accessed! Ports are Closed & Traefik is not enabled! Either deploy traefik or open your ports (which is worst for security)" >/opt/appdata/plexguide/emergency/message.b
+ echo "Warning: Apps cannot be accessed! Ports are closed & Traefik is not deployed! Either deploy Traefik or open your ports (which is worst for security)" >/opt/appdata/plexguide/emergency/message.b
elif [[ -e "/opt/appdata/plexguide/emergency/message.b" ]]; then rm -rf /opt/appdata/plexguide/emergency/message.b; fi
##### Warning for Bad Traefik Deployment - message.c is tied to traefik showing a status! Do not change unless you know what your doing
touch /opt/appdata/plexguide/traefik.check
@@ -124,7 +124,7 @@ while true; do
fi
wget -q "https://${cname}.${domain}" -O "/opt/appdata/plexguide/traefik.check"
if [[ $(cat /opt/appdata/plexguide/traefik.check) == "" && $(docker ps --format '{{.Names}}' | grep "traefik" ) == "traefik" ]]; then
- echo "Traefik is Not Deployed Properly! Cannot Reach the Portainer SubDomain!" >/opt/appdata/plexguide/emergency/message.c
+ echo "Traefik is not deployed properly! Cannot Reach the Portainer SubDomain!" >/opt/appdata/plexguide/emergency/message.c
else
if [[ -e "/opt/appdata/plexguide/emergency/message.c" ]]; then
rm -rf /opt/appdata/plexguide/emergency/message.c
@@ -132,7 +132,7 @@ while true; do
fi
##### Warning for Traefik Rate Limit Exceeded
if [[ $(cat /opt/appdata/plexguide/traefik.check) == "" && $(docker logs traefik | grep "rateLimited") != "" ]]; then
- echo "$domain's rated limited exceed | Traefik (LetsEncrypt)! Takes upto one week to clear up (or use a new domain)" >/opt/appdata/plexguide/emergency/message.d
+ echo "$domain's rated limited exceed | Traefik (LetsEncrypt)! Takes up to one week to clear up (or use a new domain)" >/opt/appdata/plexguide/emergency/message.d
else
if [[ -e "/opt/appdata/plexguide/emergency/message.d" ]]; then
rm -rf /opt/appdata/plexguide/emergency/message.d
diff --git a/menu/pgui/templates/oldui.php b/menu/pgui/templates/oldui.php
index 6f9c61e..a883379 100644
--- a/menu/pgui/templates/oldui.php
+++ b/menu/pgui/templates/oldui.php
@@ -134,7 +134,7 @@ padding: 10px;
diff --git a/menu/pgui/templates/test-index.php b/menu/pgui/templates/test-index.php
index 5342f98..1b2f785 100644
--- a/menu/pgui/templates/test-index.php
+++ b/menu/pgui/templates/test-index.php
@@ -142,7 +142,7 @@ a:visited {
diff --git a/menu/pgui/templates/test-index.php.backup b/menu/pgui/templates/test-index.php.backup
index 8cd6008..fdc5f60 100644
--- a/menu/pgui/templates/test-index.php.backup
+++ b/menu/pgui/templates/test-index.php.backup
@@ -134,7 +134,7 @@ padding: 10px;
diff --git a/menu/pgvault/autobackup.func b/menu/pgvault/autobackup.func
index 387ffeb..aad5bff 100644
--- a/menu/pgvault/autobackup.func
+++ b/menu/pgvault/autobackup.func
@@ -4,146 +4,153 @@
# Author(s): Admin9705
# GNU: General Public License v3.0
################################################################################
+declare YELLOW='\033[0;33m'
+declare NC='\033[0m'
+declare total_size_in_bytes=0
+declare total_program=0
+declare program_number=0
+
runningcheck() {
- initial2
- runcheck5=$(docker ps | grep ${program_var})
- if [[ "$runcheck5" != "" ]]; then running=1; else running=0; fi
+ initial2
+ runcheck5=$(docker ps | grep ${program_var})
+ if [[ "$runcheck5" != "" ]]; then running=1; else running=0; fi
}
initial() {
- rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
- rm -rf /var/plexguide/pgvault.buildup 1>/dev/null 2>&1
- rm -rf /var/plexguide/program.temp 1>/dev/null 2>&1
- rm -rf /var/plexguide/app.list 1>/dev/null 2>&1
- rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
- touch /var/plexguide/pgvault.output
- touch /var/plexguide/program.temp
- touch /var/plexguide/app.list
- touch /var/plexguide/pgvault.buildup
- touch /var/plexguide/pgvault.output
- touch /var/plexguide/rclone.size
- space=$(cat /var/plexguide/data.location)
- # To Get Used Space
- used=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $3}')
- # To Get All Space
- capacity=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $2}')
- # Percentage
- percentage=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $5}')
+ rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
+ rm -rf /var/plexguide/pgvault.buildup 1>/dev/null 2>&1
+ rm -rf /var/plexguide/program.temp 1>/dev/null 2>&1
+ rm -rf /var/plexguide/app.list 1>/dev/null 2>&1
+ rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
+ touch /var/plexguide/pgvault.output
+ touch /var/plexguide/program.temp
+ touch /var/plexguide/app.list
+ touch /var/plexguide/pgvault.buildup
+ touch /var/plexguide/pgvault.output
+ touch /var/plexguide/rclone.size
+ space=$(cat /var/plexguide/data.location)
+ # To Get Used Space
+ used=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $3}')
+ # To Get All Space
+ capacity=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $2}')
+ # Percentage
+ percentage=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $5}')
}
initial2() {
- path=$(cat /var/plexguide/server.hd.path)
- tarlocation=$(cat /var/plexguide/data.location)
- program_size=$(cat /var/plexguide/rclone.size)
- program_var=$(cat /tmp/program_var)
- server_id=$(cat /var/plexguide/server.id)
+ path=$(cat /var/plexguide/server.hd.path)
+ tarlocation=$(cat /var/plexguide/data.location)
+ program_size=$(cat /var/plexguide/rclone.size)
+ program_var=$(cat /tmp/program_var)
+ server_id=$(cat /var/plexguide/server.id)
}
final() {
- echo
- echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
- read -p '✅ Process Complete! | PRESS [ENTER] ' typed pgvault.serverlist
+ ls -l /mnt/gdrive/plexguide/backup | grep "^d" | awk '{print $9}' >pgvault.serverlist
}
pgboxrecall() {
- ls -p /opt/coreapps/apps | grep -v / >/var/plexguide/pgvault.apprecall
- while read p; do
- sed -i "/^$p\b/Id" /var/plexguide/pgvault.apprecall
- done >/var/plexguide/pgvault.apprecall
- done /var/plexguide/pgvault.apprecall
+ while read p; do
+ sed -i "/^$p\b/Id" /var/plexguide/pgvault.apprecall
+ done >/var/plexguide/pgvault.apprecall
+ done /dev/null 2>&1
- while read p; do
- echo -n $p >>/var/plexguide/program.temp
- echo -n " " >>/var/plexguide/program.temp
- num=$((num + 1))
- if [ "$num" == 7 ]; then
- num=0
- echo " " >>/var/plexguide/program.temp
- fi
- done /dev/null 2>&1
+ while read p; do
+ echo -n $p >>/var/plexguide/program.temp
+ echo -n " " >>/var/plexguide/program.temp
+ num=$((num + 1))
+ if [ "$num" == 7 ]; then
+ num=0
+ echo " " >>/var/plexguide/program.temp
+ fi
+ done /var/plexguide/pgvault.apprecall
- while read p; do
- sed -i "/^$p\b/Id" /var/plexguide/pgvault.apprecall
- done /var/plexguide/pgvault.apprecall
+ while read p; do
+ sed -i "/^$p\b/Id" /var/plexguide/pgvault.apprecall
+ done >/var/plexguide/pgvault.buildup
- sed -i "/^$typed\b/Id" /var/plexguide/pgvault.apprecall
-
- num=0
- rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
- while read p; do
- echo -n $p >>/var/plexguide/pgvault.output
- echo -n " " >>/var/plexguide/pgvault.output
- if [ "$num" == 7 ]; then
- num=0
- echo " " >>/var/plexguide/pgvault.output
- fi
- done >/var/plexguide/pgvault.buildup
+ sed -i "/^$typed\b/Id" /var/plexguide/pgvault.apprecall
+
+ num=0
+ rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
+ while read p; do
+ echo -n $p >>/var/plexguide/pgvault.output
+ echo -n " " >>/var/plexguide/pgvault.output
+ if [ "$num" == 7 ]; then
+ num=0
+ echo " " >>/var/plexguide/pgvault.output
+ fi
+ done /tmp/server.list
-
- ### List Out Apps In Readable Order (One's Not Installed)
- num=0
- rm -rf /var/plexguide/program.temp 1>/dev/null 2>&1
- while read p; do
- echo -n $p >>/var/plexguide/program.temp
- echo -n " " >>/var/plexguide/program.temp
- num=$((num + 1))
- if [ "$num" == 7 ]; then
- num=0
- echo " " >>/var/plexguide/program.temp
- fi
- done /tmp/server.list
+
+ ### List Out Apps In Readable Order (One's Not Installed)
+ num=0
+ rm -rf /var/plexguide/program.temp 1>/dev/null 2>&1
+ while read p; do
+ echo -n $p >>/var/plexguide/program.temp
+ echo -n " " >>/var/plexguide/program.temp
+ num=$((num + 1))
+ if [ "$num" == 7 ]; then
+ num=0
+ echo " " >>/var/plexguide/program.temp
+ fi
+ done /tmp/server.select
-
- if [[ "$server" == "exit" || "$server" == "Exit" || "$server" == "EXIT" || "$server" == "z" || "$server" == "Z" ]]; then exit; fi
-
- current2=$(cat /tmp/server.list | grep "\<$server\>")
- if [ "$current2" == "" ]; then
- badserver
- serverprime
- fi
-
- tempserver=$server
- ls -l /mnt/gdrive/plexguide/backup/$tempserver | awk '{print $9}' | tail -n +2 >/var/plexguide/pgvault.restoreapps
-
- ### Blank Out Temp List
- rm -rf /var/plexguide/pgvault.apprecall 1>/dev/null 2>&1
- touch /var/plexguide/pgvault.apprecall
-
- while read p; do
- basename "$p" .tar >>/var/plexguide/pgvault.apprecall
- done /dev/null 2>&1
- touch /var/plexguide/program.temp
- mathprime
+ read -p '🌍 Type Server Name | Press [ENTER]: ' server /tmp/server.select
+
+ if [[ "$server" == "exit" || "$server" == "Exit" || "$server" == "EXIT" || "$server" == "z" || "$server" == "Z" ]]; then exit; fi
+
+ current2=$(cat /tmp/server.list | grep "\<$server\>")
+ if [ "$current2" == "" ]; then
+ badserver
+ serverprime
+ fi
+
+ tempserver=$server
+ ls -l /mnt/gdrive/plexguide/backup/$tempserver | awk '{print $9}' | tail -n +2 >/var/plexguide/pgvault.restoreapps
+
+ ### Blank Out Temp List
+ rm -rf /var/plexguide/pgvault.apprecall 1>/dev/null 2>&1
+ touch /var/plexguide/pgvault.apprecall
+
+ while read p; do
+ basename "$p" .tar >>/var/plexguide/pgvault.apprecall
+ done /dev/null 2>&1
+ touch /var/plexguide/program.temp
+ mathprime
}
buildup2() {
- echo "$typed" >>/var/plexguide/pgvault.buildup
- sed -i "/^$typed\b/Id" /var/plexguide/pgvault.apprecall
-
- num=0
- rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
- while read p; do
- echo -n $p >>/var/plexguide/pgvault.output
- echo -n " " >>/var/plexguide/pgvault.output
- if [ "$num" == 7 ]; then
- num=0
- echo " " >>/var/plexguide/pgvault.output
- fi
- done >/var/plexguide/pgvault.buildup
+ sed -i "/^$typed\b/Id" /var/plexguide/pgvault.apprecall
+
+ num=0
+ rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
+ while read p; do
+ echo -n $p >>/var/plexguide/pgvault.output
+ echo -n " " >>/var/plexguide/pgvault.output
+ if [ "$num" == 7 ]; then
+ num=0
+ echo " " >>/var/plexguide/pgvault.output
+ fi
+ done /tmp/program_var
- # Execute Main Program
- backup_process
-
- sleep 2
- done /tmp/program_var
+ # Execute Main Program
+ backup_process
+
+ sleep 2
+ done /tmp/program_var
- # Execute Main Program
- backup_process
-
- sleep 2
- done /tmp/program_var
+ # Execute Main Program
+ backup_process
+
+ sleep 2
+ done /dev/null 2>&1
- fi
-
- ###### Start the Backup Process - Backup Locally First
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ Zipping Data Locally - $program_var
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
-
- path=$(cat /var/plexguide/server.hd.path)
- tarlocation=$(cat /var/plexguide/data.location)
- server_id=$(cat /var/plexguide/server.id)
-
- tar \
+ initial2
+ ##### Stop Docker Container if Running
+ runningcheck
+ if [[ "$running" == "1" ]]; then
+ echo "↘️ Stopping Docker Container - $program_var"
+
+ sleep 1
+ docker stop $program_var 1>/dev/null 2>&1
+ clear_lines 1
+ fi
+
+ ###### Start the Backup Process - Backup Locally First
+ echo "↘️ Zipping Data Locally - $program_var"
+
+ path=$(cat /var/plexguide/server.hd.path)
+ tarlocation=$(cat /var/plexguide/data.location)
+ server_id=$(cat /var/plexguide/server.id)
+
+ tar \
--warning=no-file-changed --ignore-failed-read --absolute-names --warning=no-file-removed \
- --exclude-from=/opt/pgvault/exclude.list \
- -C /opt/appdata/${program_var} -cvf ${tarlocation}/${program_var}.tar ./
-
- ##### Restart Docker Application if was Running Prior
- if [[ "$running" == "1" ]]; then
- tee <<-EOF
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ Restarting Docker Application - $program_var
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
- sleep 2
- docker restart $program_var 1>/dev/null 2>&1
- fi
-
- ###### Backing Up Files to GDrive
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ Sending Zipped Data to Google Drive - $program_var
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
-useragent="$(cat /var/plexguide/uagent)"
-bwlimit="$(cat /var/plexguide/blitz.bw)"
-
-vfs_dcs="$(cat /var/plexguide/vfs_dcs)"
-vfs_mt="$(cat /var/plexguide/vfs_mt)"
-vfs_t="$(cat /var/plexguide/vfs_t)"
-vfs_c="$(cat /var/plexguide/vfs_c)"
-
- rclone --config /opt/appdata/plexguide/rclone.conf mkdir gdrive:/plexguide/backup/${server_id} 1>/dev/null 2>&1
-
- rclone moveto ${tarlocation}/${program_var}.tar \
+ --exclude-from=/opt/plexguide/menu/pgvault/exclude.list \
+ -C /opt/appdata/${program_var} -cvf ${tarlocation}/${program_var}.tar ./ \
+ | cut -b1-$(tput cols) | sed -u 'i\\o033[2K' | stdbuf -o0 tr '\n' '\r'; echo
+
+ clear_lines 2
+
+ ##### Restart Docker Application if was Running Prior
+ if [[ "$running" == "1" ]]; then
+ echo "↘️ Restarting Docker Application - $program_var"
+ sleep 2
+ docker restart $program_var 1>/dev/null 2>&1
+ clear_lines 1
+ fi
+
+ ###### Backing Up Files to GDrive
+ echo "↘️ Sending Zipped Data to Google Drive - $program_var"
+
+ useragent="$(cat /var/plexguide/uagent 1>/dev/null 2>&1)"
+ bwlimit="$(cat /var/plexguide/blitz.bw 1>/dev/null 2>&1)"
+
+ vfs_dcs="$(cat /var/plexguide/vfs_dcs 1>/dev/null 2>&1)"
+ vfs_mt="$(cat /var/plexguide/vfs_mt 1>/dev/null 2>&1)"
+ vfs_t="$(cat /var/plexguide/vfs_t 1>/dev/null 2>&1)"
+ vfs_c="$(cat /var/plexguide/vfs_c 1>/dev/null 2>&1)"
+
+ rclone --config /opt/appdata/plexguide/rclone.conf mkdir gdrive:/plexguide/backup/${server_id} 1>/dev/null 2>&1
+
+ rclone moveto ${tarlocation}/${program_var}.tar \
gdrive:/plexguide/backup/${server_id}/${program_var}.tar \
- --config /opt/appdata/plexguide/rclone.conf \
- -v --checksum --stats-one-line --stats 1s --progress \
- --tpslimit=10 \
- --checkers="$vfs_c" \
- --transfers="$vfs_t" \
- --no-traverse \
- --fast-list \
- --bwlimit="$bwlimit" \
- --drive-chunk-size="$vfs_dcs" \
- --user-agent="$useragent"
+ --config /opt/appdata/plexguide/rclone.conf \
+ -v --checksum --stats-one-line --stats 1s --progress \
+ --tpslimit=10 \
+ --checkers="$vfs_c" \
+ --transfers="$vfs_t" \
+ --no-traverse \
+ --fast-list \
+ --bwlimit="$bwlimit" \
+ --drive-chunk-size="$vfs_dcs" \
+ --user-agent="$useragent" 1>/dev/null 2>&1
+
+ # Show completed
+ clear_lines 1
+ tar_file_size_bytes=$(wc -c < ${tarlocation}/${program_var}.tar)
+ let total_size_in_bytes+=tar_file_size_bytes
+ tar_file_size_readable=$(du -h ${tarlocation}/${program_var}.tar | awk '{print $1}')
+ echo "✅ ${program_var} backup complete"$'\t\t\t'"${tar_file_size_readable}"$'\t'"Backup ${program_number}/${total_program}"
+ read -p '↘️ Type | PRESS ENTER: ' typed
+ clear
+
+ ##### Remove File Incase
+ rm -rf ${tarlocation}/${program_var}.tar 1>/dev/null 2>&1
+}
-##### Remove File Incase
-rm -rf ${tarlocation}/${program_var}.tar 1>/dev/null 2>&1
-}
\ No newline at end of file
+## Clear output text for n lines (arg $1)
+clear_lines() {
+ for (( i=1; i <= $(($1)); i++ ));do
+ tput cuu1
+ tput el
+ done
+}
+
+## Change text in n lines above (arg $1) with string (arg $2)
+change_line_text() {
+ tput sc
+ for (( i=1; i <= $(($1)); i++ ));do
+ tput cuu1
+ done
+ tput el
+ echo -e $2
+ tput rc
+}
diff --git a/menu/pgvault/location.sh b/menu/pgvault/location.sh
index 1c59eb0..cc63166 100644
--- a/menu/pgvault/location.sh
+++ b/menu/pgvault/location.sh
@@ -5,13 +5,13 @@
# URL: https://pgblitz.com - http://github.pgblitz.com
# GNU: General Public License v3.0
################################################################################
+source /opt/plexguide/menu/functions/start.sh
tee <<-EOF
-
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
↘️ SETTING: Backup Download Location
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Paying attention to your disk space is important! Type the name of your
-location is very important! Keep in mind PG does not format the
+location is very important! Keep in mind Pandaura does not format the
location for you!
Examples:
@@ -19,17 +19,15 @@ Examples:
2. /hd2/spongebob
NOTE: Start with a / and end with no trailing slash!
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
EOF
-
+end_menu_back
# Standby
-read -p 'TYPE the Location & Press [ENTER]: ' typed /dev/null
- # Recalls for to check existance
- rcheck=$(ls -la $typed | grep "\
")
- if [ "$rcheck" == "" ]; then
+ read -n 1 -s -r -p "Press [ANY KEY] to continue "
+ echo ""
+ fi
+
+ #################################################### TYPED CHECKERS - END
+
+ mkdir "$typed/pgcheck" &>/dev/null
+ # Recalls for to check existance
+ rcheck=$(ls -la $typed | grep "\")
+ if [ "$rcheck" == "" ]; then
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-⛔️ WARNING! - This Location Does Not Exist! Exiting! (Case Senstive)
+⛔️ WARNING! - This location does not exist! Exiting... (Case senstive)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- sleep 4
- exit
- fi
-
+ sleep 4
+ exit
+ fi
+
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-✅️ PASS: Location! Storing the Name of the Location!
+✅️ PASS: Location! Storing the name of the location!
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- # Prevents From Repeating
- rm -rf $typed/pgcheck
- sleep 3
-
+ # Prevents From Repeating
+ rm -rf $typed/pgcheck
+ sleep 3
+
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-🌇 PASS: Process Complete!
+🌇 PASS: Process complete!
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- echo "$typed" >/var/plexguide/data.location
- read -n 1 -s -r -p "Press [ANY] Key to Continue "
-
+ echo "$typed" >/var/plexguide/data.location
+ read -n 1 -s -r -p "Press [ANY] Key to Continue "
+
fi
diff --git a/menu/pgvault/pgvault.func b/menu/pgvault/pgvault.func
index 58f1982..0452133 100644
--- a/menu/pgvault/pgvault.func
+++ b/menu/pgvault/pgvault.func
@@ -4,202 +4,214 @@
# Author(s): Admin9705
# GNU: General Public License v3.0
################################################################################
+source /opt/plexguide/menu/functions/start.sh
+declare YELLOW='\033[0;33m'
+declare NC='\033[0m'
+declare total_size_in_bytes=0
+declare total_program=0
+declare program_number=0
+declare NF='\033[1;32m'
+declare NC='\033[0m'
+typed="${typed,,}"
+
runningcheck() {
- initial2
- runcheck5=$(docker ps | grep ${program_var})
- if [[ "$runcheck5" != "" ]]; then running=1; else running=0; fi
+ initial2
+ runcheck5=$(docker ps | grep ${program_var})
+ if [[ "$runcheck5" != "" ]]; then running=1; else running=0; fi
}
initial() {
- rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
- rm -rf /var/plexguide/pgvault.buildup 1>/dev/null 2>&1
- rm -rf /var/plexguide/program.temp 1>/dev/null 2>&1
- rm -rf /var/plexguide/app.list 1>/dev/null 2>&1
- rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
- touch /var/plexguide/pgvault.output
- touch /var/plexguide/program.temp
- touch /var/plexguide/app.list
- touch /var/plexguide/pgvault.buildup
- touch /var/plexguide/pgvault.output
- touch /var/plexguide/rclone.size
- space=$(cat /var/plexguide/data.location)
- # To Get Used Space
- used=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $3}')
- # To Get All Space
- capacity=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $2}')
- # Percentage
- percentage=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $5}')
+ rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
+ rm -rf /var/plexguide/pgvault.buildup 1>/dev/null 2>&1
+ rm -rf /var/plexguide/program.temp 1>/dev/null 2>&1
+ rm -rf /var/plexguide/app.list 1>/dev/null 2>&1
+ rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
+ touch /var/plexguide/pgvault.output
+ touch /var/plexguide/program.temp
+ touch /var/plexguide/app.list
+ touch /var/plexguide/pgvault.buildup
+ touch /var/plexguide/pgvault.output
+ touch /var/plexguide/rclone.size
+ space=$(cat /var/plexguide/data.location)
+ # To Get Used Space
+ used=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $3}')
+ # To Get All Space
+ capacity=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $2}')
+ # Percentage
+ percentage=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $5}')
}
initial2() {
- path=$(cat /var/plexguide/server.hd.path)
- tarlocation=$(cat /var/plexguide/data.location)
- program_size=$(cat /var/plexguide/rclone.size)
- program_var=$(cat /tmp/program_var)
- server_id=$(cat /var/plexguide/server.id)
+ path=$(cat /var/plexguide/server.hd.path)
+ tarlocation=$(cat /var/plexguide/data.location)
+ program_size=$(cat /var/plexguide/rclone.size)
+ program_var=$(cat /tmp/program_var)
+ server_id=$(cat /var/plexguide/server.id)
}
final() {
- echo
- echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
- read -p '✅ Process Complete! | PRESS [ENTER] ' typed pgvault.serverlist
+ ls -l /mnt/gdrive/plexguide/backup | grep "^d" | awk '{print $9}' >pgvault.serverlist
+}
+
+value() {
+ bash /opt/plexguide/menu/pgbox/value.sh
}
pgboxrecall() {
- ls -p /opt/coreapps/apps | grep -v / >/var/plexguide/pgvault.apprecall
- while read p; do
- sed -i "/^$p\b/Id" /var/plexguide/pgvault.apprecall
- done >/var/plexguide/pgvault.apprecall
- done /var/plexguide/pgvault.apprecall
+ while read p; do
+ sed -i "/^$p\b/Id" /var/plexguide/pgvault.apprecall
+ done >/var/plexguide/pgvault.apprecall
+ done /dev/null 2>&1
- while read p; do
- echo -n $p >>/var/plexguide/program.temp
- echo -n " " >>/var/plexguide/program.temp
- num=$((num + 1))
- if [ "$num" == 7 ]; then
- num=0
- echo " " >>/var/plexguide/program.temp
- fi
- done /dev/null 2>&1
+ while read p; do
+ echo -n $p >>/var/plexguide/program.temp
+ echo -n " " >>/var/plexguide/program.temp
+ num=$((num + 1))
+ if [ "$num" == 7 ]; then
+ num=0
+ echo " " >>/var/plexguide/program.temp
+ fi
+ done /var/plexguide/pgvault.apprecall
- while read p; do
- sed -i "/^$p\b/Id" /var/plexguide/pgvault.apprecall
- done /var/plexguide/pgvault.apprecall
+ while read p; do
+ sed -i "/^$p\b/Id" /var/plexguide/pgvault.apprecall
+ done >/var/plexguide/pgvault.buildup
- sed -i "/^$typed\b/Id" /var/plexguide/pgvault.apprecall
-
- num=0
- rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
- while read p; do
- echo -n $p >>/var/plexguide/pgvault.output
- echo -n " " >>/var/plexguide/pgvault.output
- if [ "$num" == 7 ]; then
- num=0
- echo " " >>/var/plexguide/pgvault.output
- fi
- done >/var/plexguide/pgvault.buildup
+ sed -i "/^$typed\b/Id" /var/plexguide/pgvault.apprecall
+
+ num=0
+ rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
+ while read p; do
+ echo -n $p >>/var/plexguide/pgvault.output
+ echo -n " " >>/var/plexguide/pgvault.output
+ if [ "$num" == 7 ]; then
+ num=0
+ echo " " >>/var/plexguide/pgvault.output
+ fi
+ done /tmp/server.list
-
- ### List Out Apps In Readable Order (One's Not Installed)
- num=0
- rm -rf /var/plexguide/program.temp 1>/dev/null 2>&1
- while read p; do
- echo -n $p >>/var/plexguide/program.temp
- echo -n " " >>/var/plexguide/program.temp
- num=$((num + 1))
- if [ "$num" == 7 ]; then
- num=0
- echo " " >>/var/plexguide/program.temp
- fi
- done /tmp/server.list
+
+ ### List Out Apps In Readable Order (One's Not Installed)
+ num=0
+ rm -rf /var/plexguide/program.temp 1>/dev/null 2>&1
+ while read p; do
+ echo -n $p >>/var/plexguide/program.temp
+ echo -n " " >>/var/plexguide/program.temp
+ num=$((num + 1))
+ if [ "$num" == 7 ]; then
+ num=0
+ echo " " >>/var/plexguide/program.temp
+ fi
+ done /tmp/server.select
-
- if [[ "$server" == "exit" || "$server" == "Exit" || "$server" == "EXIT" || "$server" == "z" || "$server" == "Z" ]]; then exit; fi
-
- current2=$(cat /tmp/server.list | grep "\<$server\>")
- if [ "$current2" == "" ]; then
- badserver
- serverprime
- fi
-
- tempserver=$server
- ls -l /mnt/gdrive/plexguide/backup/$tempserver | awk '{print $9}' | tail -n +2 >/var/plexguide/pgvault.restoreapps
-
- ### Blank Out Temp List
- rm -rf /var/plexguide/pgvault.apprecall 1>/dev/null 2>&1
- touch /var/plexguide/pgvault.apprecall
-
- while read p; do
- basename "$p" .tar >>/var/plexguide/pgvault.apprecall
- done /dev/null 2>&1
- touch /var/plexguide/program.temp
- mathprime
+end_menu_back
+ read -p '💬 Type server name | Press [ENTER]: ' server /tmp/server.select
+
+ if [[ "$server" == "exit" || "$server" == "Exit" || "$server" == "EXIT" || "$server" == "z" || "$server" == "Z" ]]; then exit; fi
+
+ current2=$(cat /tmp/server.list | grep "\<$server\>")
+ if [ "$current2" == "" ]; then
+ badserver
+ serverprime
+ fi
+
+ tempserver=$server
+ ls -l /mnt/gdrive/plexguide/backup/$tempserver | awk '{print $9}' | tail -n +2 >/var/plexguide/pgvault.restoreapps
+
+ ### Blank Out Temp List
+ rm -rf /var/plexguide/pgvault.apprecall 1>/dev/null 2>&1
+ touch /var/plexguide/pgvault.apprecall
+
+ while read p; do
+ basename "$p" .tar >>/var/plexguide/pgvault.apprecall
+ done /dev/null 2>&1
+ touch /var/plexguide/program.temp
+ mathprime
}
buildup2() {
- echo "$typed" >>/var/plexguide/pgvault.buildup
- sed -i "/^$typed\b/Id" /var/plexguide/pgvault.apprecall
-
- num=0
- rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
- while read p; do
- echo -n $p >>/var/plexguide/pgvault.output
- echo -n " " >>/var/plexguide/pgvault.output
- if [ "$num" == 7 ]; then
- num=0
- echo " " >>/var/plexguide/pgvault.output
- fi
- done >/var/plexguide/pgvault.buildup
+ sed -i "/^$typed\b/Id" /var/plexguide/pgvault.apprecall
+
+ num=0
+ rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
+ while read p; do
+ echo -n $p >>/var/plexguide/pgvault.output
+ echo -n " " >>/var/plexguide/pgvault.output
+ if [ "$num" == 7 ]; then
+ num=0
+ echo " " >>/var/plexguide/pgvault.output
+ fi
+ done /tmp/program_var
- # Execute Main Program
- backup_process
-
- sleep 2
- done /tmp/program_var
+ # Execute Main Program
+ backup_process
+
+ sleep 2
+ done /tmp/program_var
- # Execute Main Program
- backup_process
-
- sleep 2
- done /tmp/program_var
+ # Execute Main Program
+ backup_process
+
+ sleep 2
+ done /dev/null 2>&1
- fi
-
- ###### Start the Backup Process - Backup Locally First
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ Zipping Data Locally - $program_var
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
-
- path=$(cat /var/plexguide/server.hd.path)
- tarlocation=$(cat /var/plexguide/data.location)
- server_id=$(cat /var/plexguide/server.id)
-
- tar \
+ initial2
+ ##### Stop Docker Container if Running
+ runningcheck
+ if [[ "$running" == "1" ]]; then
+ echo "🛑 Stopping Docker container - $program_var"
+
+ sleep 1
+ docker stop $program_var 1>/dev/null 2>&1
+ clear_lines 1
+ fi
+
+ ###### Start the Backup Process - Backup Locally First
+ echo "↘️ Zipping Data Locally - $program_var"
+
+ path=$(cat /var/plexguide/server.hd.path)
+ tarlocation=$(cat /var/plexguide/data.location)
+ server_id=$(cat /var/plexguide/server.id)
+
+ tar \
--warning=no-file-changed --ignore-failed-read --absolute-names --warning=no-file-removed \
--exclude-from=/opt/pgvault/exclude.list \
- -C /opt/appdata/${program_var} -cvf ${tarlocation}/${program_var}.tar ./
-
- ##### Restart Docker Application if was Running Prior
- if [[ "$running" == "1" ]]; then
- tee <<-EOF
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ Restarting Docker Application - $program_var
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
- sleep 2
- docker restart $program_var 1>/dev/null 2>&1
- fi
-
- ###### Backing Up Files to GDrive
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ Sending Zipped Data to Google Drive - $program_var
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
-useragent="$(cat /var/plexguide/uagent)"
-bwlimit="$(cat /var/plexguide/blitz.bw)"
-
-vfs_dcs="$(cat /var/plexguide/vfs_dcs)"
-vfs_mt="$(cat /var/plexguide/vfs_mt)"
-vfs_t="$(cat /var/plexguide/vfs_t)"
-vfs_c="$(cat /var/plexguide/vfs_c)"
-
- rclone --config /opt/appdata/plexguide/rclone.conf mkdir gdrive:/plexguide/backup/${server_id} 1>/dev/null 2>&1
-
- rclone moveto ${tarlocation}/${program_var}.tar \
+ -C /opt/appdata/${program_var} -cvf ${tarlocation}/${program_var}.tar ./ \
+ | cut -b1-$(tput cols) | sed -u 'i\\o033[2K' | stdbuf -o0 tr '\n' '\r'; echo
+
+ clear_lines 2
+
+ ##### Restart Docker Application if was Running Prior
+ if [[ "$running" == "1" ]]; then
+ echo "🔄 Restarting Docker application - $program_var"
+ sleep 2
+ docker restart $program_var 1>/dev/null 2>&1
+ clear_lines 1
+ fi
+
+ ###### Backing Up Files to GDrive
+ echo "⬆️ Sending zipped data to Google Drive - $program_var"
+
+ useragent="$(cat /var/plexguide/uagent 1>/dev/null 2>&1)"
+ bwlimit="off"
+
+ vfs_dcs="64M"
+ vfs_mt="580G"
+ vfs_t="1"
+ vfs_c="2"
+
+ rclone --config /opt/appdata/plexguide/rclone.conf mkdir gdrive:/plexguide/backup/${server_id} 1>/dev/null 2>&1
+
+ rclone moveto ${tarlocation}/${program_var}.tar \
gdrive:/plexguide/backup/${server_id}/${program_var}.tar \
- --config /opt/appdata/plexguide/rclone.conf \
- -v --checksum --stats-one-line --stats 1s --progress \
- --tpslimit=10 \
- --checkers="$vfs_c" \
- --transfers="$vfs_t" \
- --no-traverse \
- --fast-list \
- --bwlimit="$bwlimit" \
- --drive-chunk-size="$vfs_dcs" \
- --user-agent="$useragent"
-
-##### Remove File Incase
-rm -rf ${tarlocation}/${program_var}.tar 1>/dev/null 2>&1
+ --config /opt/appdata/plexguide/rclone.conf \
+ -v --checksum --stats-one-line --stats 1s --progress \
+ --tpslimit=10 \
+ --checkers="$vfs_c" \
+ --transfers="$vfs_t" \
+ --no-traverse \
+ --fast-list \
+ --bwlimit="$bwlimit" \
+ --drive-chunk-size="$vfs_dcs" \
+ --user-agent="$useragent" 1>/dev/null 2>&1
+
+ # Show completed
+ clear_lines 1
+ tar_file_size_bytes=$(wc -c < ${tarlocation}/${program_var}.tar)
+ let total_size_in_bytes+=tar_file_size_bytes
+ tar_file_size_readable=$(du -h ${tarlocation}/${program_var}.tar | awk '{print $1}')
+ echo "✅ ${program_var} backup complete"$'\t\t\t'"${tar_file_size_readable}"$'\t'"Backup ${program_number}/${total_program}"
+
+ ##### Remove File Incase
+ rm -rf ${tarlocation}/${program_var}.tar 1>/dev/null 2>&1
}
######################################################## END - PG Vault Backup
#
##################################################### START - PG Vault Restore
restore_all_start() {
-
- while read p; do
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-Vault - Restoring: $p
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
-
- sleep 2.5
-
- # Store Used Program
- echo $p >/tmp/program_var
- # Execute Main Program
- restore_process
-
- sleep 2
- done /tmp/program_var
+ # Execute Main Program
+ restore_process
+
+ sleep 2
+ done /tmp/program_var
- # Execute Main Program
- restore_process
-
- sleep 2
- done /tmp/program_var
+ # Execute Main Program
+ restore_process
+
+ sleep 2
+ done /dev/null 2>&1
- fi
-
- ###### Start the Backup Process - Backup Locally First
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ UnZipping & Restoring Data - $program_var
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
-
- mkdir -p "/opt/appdata/${program_var}"
- rm -rf "/opt/appdata/${program_var}/*"
- chown -R 1000:1000 "/opt/appdata/${program_var}"
- chmod -R 775 "/opt/appdata/${program_var}"
- tar -C /opt/appdata/${program_var} -xvf ${tarlocation}/${program_var}.tar
- chown -R 1000:1000 "/opt/appdata/${program_var}"
- chmod -R 775 "/opt/appdata/${program_var}"
- ##rebuild app after restore
+
+ ##### Stop Docker Container if Running
+ runningcheck
+ if [ "$running" == "1" ]; then
+ echo "🛑 Stopping Docker Container - $program_var"
+ sleep 1
+ docker stop $program_var 1>/dev/null 2>&1
+ clear_lines 1
+ fi
+
+ ###### Start the Backup Process - Backup Locally First
+ echo "↘️ UnZipping & Restoring Data - $program_var"
+
+ mkdir -p "/opt/appdata/${program_var}"
+ rm -rf "/opt/appdata/${program_var}/*"
+ chown -R 1000:1000 "/opt/appdata/${program_var}"
+ chmod -R 775 "/opt/appdata/${program_var}"
+ tar -C /opt/appdata/${program_var} -xvf ${tarlocation}/${program_var}.tar
+ chown -R 1000:1000 "/opt/appdata/${program_var}"
+ chmod -R 775 "/opt/appdata/${program_var}"
+
+ ##for rebuild plex and more ##
+ value
+
+ ##rebuild app after restore
if [[ -e "/opt/coreapps/apps/$program_var.yml" ]]; then ansible-playbook /opt/coreapps/apps/$program_var.yml; fi
if [[ -e "/opt/communityapps/$program_var.yml" ]]; then ansible-playbook /opt/communityapps/apps/$program_var.yml; fi
- if [[ -e "/opt/mycontainers/$program_var.yml" ]]; then ansible-playbook /opt/mycontainers/apps/$program_var.yml; fi
-
- ##### Restart Docker Application if was Running Prior
- if [[ "$running" == "1" ]]; then
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ Restarting Docker Application - $program_var
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
- sleep 2
- docker restart $program_var 1>/dev/null 2>&1
- fi
-
- ##### Remove File Incase
- rm -rf ${tarlocation}/${program_var}.tar 1>/dev/null 2>&1
+ if [[ -e "/opt/mycontainers/$program_var.yml" ]]; then ansible-playbook /opt/mycontainers/apps/$program_var.yml; fi
+
+ ##### Restart Docker Application if was Running Prior
+ if [[ "$running" == "1" ]]; then
+ echo "🔄 Restarting Docker Application - $program_var"
+ sleep 2
+ docker restart $program_var 1>/dev/null 2>&1
+ clear_lines 1
+ fi
+
+ ##### Remove File Incase
+ rm -rf ${tarlocation}/${program_var}.tar 1>/dev/null 2>&1
}
##################################################### END - PG Vault Restore
#
##################################################### START - Backup Interface
vaultbackup() {
- ### List Out Apps In Readable Order (One's Not Installed)
- notrun=$(cat /var/plexguide/program.temp)
- buildup=$(cat /var/plexguide/pgvault.output)
-
- if [[ "$buildup" == "" ]]; then buildup="NONE"; fi
+ ### List Out Apps In Readable Order (One's Not Installed)
+ notrun=$(cat /var/plexguide/program.temp)
+ buildup=$(cat /var/plexguide/pgvault.output)
+
+ if [[ "$buildup" == "" ]]; then buildup="NONE"; fi
tee <<-EOF
-
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-🚀 Vault ~ Data Storage
+🔒 Vault ~ Data Storage
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-📂 App Data available to Backup
+📂 App data available to backup
$notrun
-
-💾 Apps Queued for Backup
+--------------------------------------------------------------------------
+💾 Apps queued for backup
$buildup
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-[A] Backup
-[Z] Exit
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
+[A] to backup
EOF
- read -p '🌍 Type APP for QUEUE | Type all to backup all apps | Press [ENTER]: ' typed ")
- if [ "$current2" != "" ]; then
- queued
- vaultbackup
- fi
-
- cat /var/plexguide/pgvault.buildup >/tmp/appcheck.5
- cat /var/plexguide/pgvault.apprecall >>/tmp/appcheck.5
- current1=$(cat /tmp/appcheck.5 | grep "\<$typed\>")
- if [[ "$current1" == "" ]]; then badinput && vaultbackup; fi
-
- buildup
+end_menu_back
+ read -p '🌍 Type APP for QUEUE | Type 'all' to backup all apps | Press [ENTER]: ' typed ")
+ if [ "$current2" != "" ]; then
+ queued
+ vaultbackup
+ fi
+
+ cat /var/plexguide/pgvault.buildup >/tmp/appcheck.5
+ cat /var/plexguide/pgvault.apprecall >>/tmp/appcheck.5
+ current1=$(cat /tmp/appcheck.5 | grep "\<$typed\>")
+ if [[ "$current1" == "" ]]; then badinput && vaultbackup; fi
+
+ buildup
}
##################################################### END - Backup Interface
#
##################################################### START - Restore Interface
vaultrestore() {
- notrun=$(cat /var/plexguide/program.temp)
- buildup=$(cat /var/plexguide/pgvault.output)
-
- if [ "$buildup" == "" ]; then buildup="NONE"; fi
+ notrun=$(cat /var/plexguide/program.temp)
+ buildup=$(cat /var/plexguide/pgvault.output)
+
+ if [ "$buildup" == "" ]; then buildup="NONE"; fi
tee <<-EOF
-
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-🚀 Vault ~ Data Recall
+🔒 Vault ~ Data Recall
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-📂 App Data available to Restore
+📂 App data available to restore
$notrun
-
-💾 Apps Queued for Restore
+--------------------------------------------------------------------------
+💾 Apps queued for restore
$buildup
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-[A] Restore
-[Z] Exit
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
+[A] to restore
EOF
- read -p '🌍 Type APP for QUEUE | Type all to restore all apps | Press [ENTER]: ' typed ")
- if [ "$current2" != "" ]; then
- queued
- vaultrestore
- fi
- cat /var/plexguide/pgvault.buildup >/tmp/appcheck.5
- cat /var/plexguide/pgvault.apprecall >>/tmp/appcheck.5
- current2=$(cat /tmp/appcheck.5 | grep "\<$typed\>")
- echo $current2 >/var/plexguide/app_rebuild
- #Rebuild Depending on Location
- if [[ "$current2" == "" ]]; then badinput && vaultrestore; fi
- buildup2
+end_menu_back
+ read -p '🌍 Type APP for QUEUE | Type 'all' to restore all apps | Press [ENTER]: ' typed ")
+ if [ "$current2" != "" ]; then
+ queued
+ vaultrestore
+ fi
+ cat /var/plexguide/pgvault.buildup >/tmp/appcheck.5
+ cat /var/plexguide/pgvault.apprecall >>/tmp/appcheck.5
+ current2=$(cat /tmp/appcheck.5 | grep "\<$typed\>")
+ echo $current2 >/var/plexguide/app_rebuild
+ #Rebuild Depending on Location
+ if [[ "$current2" == "" ]]; then badinput && vaultrestore; fi
+ buildup2
}
##################################################### START Primary Interface
primaryinterface() {
- initial2
+ initial2
tee <<-EOF
-
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-📁 Vault Interface
+🔒 Vault Interface
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-🌵 Disk Used Space: $used of $capacity | $percentage Used Capacity
-
-[1] Data Backup
-[2] Data Restore
-[3] Current Server ID : $server_id
-[4] Processing Location : $tarlocation
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-[Z] Exit
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+Used disk space: $used of $capacity | $percentage Used Capacity
+[1] Backup your data
+[2] Restore your data
+[3] Change Server ID | Current Server ID : $(echo -e ${NF}$server_id${NC})
+[4] Processing location | Current location : $tarlocation
EOF
- read -p 'Type a Number | Press [ENTER]: ' typed /var/plexguide/server.id.stored
- bash /opt/plexguide/menu/interface/serverid.sh
- primaryinterface
- elif [[ "$typed" == "4" ]]; then
- bash /opt/pgvault/location.sh
- primaryinterface
- elif [[ "$typed" == "Z" || "$typed" == "z" ]]; then
- exit
- else
- badinput
- primaryinterface
- fi
+end_menu_back
+ read -p 'Type a number | Press [ENTER]: ' typed /var/plexguide/server.id.stored
+ bash /opt/plexguide/menu/interface/serverid.sh
+ primaryinterface
+ elif [[ "$typed" == "4" ]]; then
+ bash /opt/pgvault/location.sh
+ primaryinterface
+ elif [[ "$typed" == "Z" || "$typed" == "z" ]]; then
+ exit
+ else
+ badinput
+ primaryinterface
+ fi
}
##################################################### END Primary Interface
restorecheck() {
- if [[ "$restoreid" == "[NOT-SET]" ]]; then
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-⛔️ WARNING! - You Must Set Your Recovery ID First! Restarting Process!
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
- read -n 1 -s -r -p "Press [ANY] Key to Continue "
- echo
- primaryinterface
- exit
- fi
+ if [[ "$restoreid" == "[NOT-SET]" ]]; then
+ echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
+ echo "⚠️ WARNING! - You must set your recovery ID first. Restarting process!"
+ echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
+ read -n 1 -s -r -p "Press [ANY] Key to Continue "
+ echo
+ clear_lines 5
+ primaryinterface
+ exit
+ fi
+}
+
+## Clear output text for n lines (arg $1)
+clear_lines() {
+ for (( i=1; i <= $(($1)); i++ ));do
+ tput cuu1
+ tput el
+ done
+}
+
+## Change text in n lines above (arg $1) with string (arg $2)
+change_line_text() {
+ tput sc
+ for (( i=1; i <= $(($1)); i++ ));do
+ tput cuu1
+ done
+ tput el
+ echo -e $2
+ tput rc
}
diff --git a/menu/pgvault/pgvault.sh b/menu/pgvault/pgvault.sh
index 8122dd1..4e59a2c 100644
--- a/menu/pgvault/pgvault.sh
+++ b/menu/pgvault/pgvault.sh
@@ -5,8 +5,8 @@
# URL: https://pgblitz.com - http://github.pgblitz.com
# GNU: General Public License v3.0
################################################################################
-source /opt/pgvault/functions.sh
-source /opt/pgvault/pgvault.func
+source /opt/plexguide/menu/pgvault/functions.sh
+source /opt/plexguide/menu/functions/pgvault.func
file="/var/plexguide/restore.id"
if [ ! -e "$file" ]; then
echo "[NOT-SET]" >/var/plexguide/restore.id
diff --git a/menu/pgvault/pgvaultprotectet.func b/menu/pgvault/pgvaultprotectet.func
index 2dbd530..266decd 100644
--- a/menu/pgvault/pgvaultprotectet.func
+++ b/menu/pgvault/pgvaultprotectet.func
@@ -6,143 +6,143 @@
# GNU: General Public License v3.0
################################################################################
runningcheck() {
- initial2
- runcheck5=$(docker ps | grep ${program_var})
- if [ "$runcheck5" != "" ]; then running=1; else running=0; fi
+ initial2
+ runcheck5=$(docker ps | grep ${program_var})
+ if [ "$runcheck5" != "" ]; then running=1; else running=0; fi
}
initial() {
- rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
- rm -rf /var/plexguide/pgvault.buildup 1>/dev/null 2>&1
- rm -rf /var/plexguide/program.temp 1>/dev/null 2>&1
- rm -rf /var/plexguide/app.list 1>/dev/null 2>&1
- rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
- touch /var/plexguide/pgvault.output
- touch /var/plexguide/program.temp
- touch /var/plexguide/app.list
- touch /var/plexguide/pgvault.buildup
- touch /var/plexguide/pgvault.output
- touch /var/plexguide/rclone.size
- space=$(cat /var/plexguide/data.location)
- # To Get Used Space
- used=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $3}')
- # To Get All Space
- capacity=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $2}')
- # Percentage
- percentage=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $5}')
+ rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
+ rm -rf /var/plexguide/pgvault.buildup 1>/dev/null 2>&1
+ rm -rf /var/plexguide/program.temp 1>/dev/null 2>&1
+ rm -rf /var/plexguide/app.list 1>/dev/null 2>&1
+ rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
+ touch /var/plexguide/pgvault.output
+ touch /var/plexguide/program.temp
+ touch /var/plexguide/app.list
+ touch /var/plexguide/pgvault.buildup
+ touch /var/plexguide/pgvault.output
+ touch /var/plexguide/rclone.size
+ space=$(cat /var/plexguide/data.location)
+ # To Get Used Space
+ used=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $3}')
+ # To Get All Space
+ capacity=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $2}')
+ # Percentage
+ percentage=$(df -h /opt/appdata/plexguide | tail -n +2 | awk '{print $5}')
}
initial2() {
- path=$(cat /var/plexguide/server.hd.path)
- tarlocation=$(cat /var/plexguide/data.location)
- program_size=$(cat /var/plexguide/rclone.size)
- program_var=$(cat /tmp/program_var)
- server_id=$(cat /var/plexguide/server.id)
+ path=$(cat /var/plexguide/server.hd.path)
+ tarlocation=$(cat /var/plexguide/data.location)
+ program_size=$(cat /var/plexguide/rclone.size)
+ program_var=$(cat /tmp/program_var)
+ server_id=$(cat /var/plexguide/server.id)
}
final() {
- echo
- echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
- read -p '✅ Process Complete! | PRESS [ENTER] ' typed pgvault.serverlist
+ ls -l /mnt/gdrive/plexguide/backup | grep "^d" | awk '{print $9}' >pgvault.serverlist
}
pgboxrecall() {
- ls -p /opt/coreapps/apps | grep -v / >/var/plexguide/pgvault.apprecall
- while read p; do
- sed -i "/^$p\b/Id" /var/plexguide/pgvault.apprecall
- done >/var/plexguide/pgvault.apprecall
- done /var/plexguide/pgvault.apprecall
+ while read p; do
+ sed -i "/^$p\b/Id" /var/plexguide/pgvault.apprecall
+ done >/var/plexguide/pgvault.apprecall
+ done /dev/null 2>&1
- while read p; do
- echo -n $p >>/var/plexguide/program.temp
- echo -n " " >>/var/plexguide/program.temp
- num=$((num + 1))
- if [ "$num" == 7 ]; then
- num=0
- echo " " >>/var/plexguide/program.temp
- fi
- done /dev/null 2>&1
+ while read p; do
+ echo -n $p >>/var/plexguide/program.temp
+ echo -n " " >>/var/plexguide/program.temp
+ num=$((num + 1))
+ if [ "$num" == 7 ]; then
+ num=0
+ echo " " >>/var/plexguide/program.temp
+ fi
+ done /var/plexguide/pgvault.apprecall
- while read p; do
- sed -i "/^$p\b/Id" /var/plexguide/pgvault.apprecall
- done /var/plexguide/pgvault.apprecall
+ while read p; do
+ sed -i "/^$p\b/Id" /var/plexguide/pgvault.apprecall
+ done >/var/plexguide/pgvault.buildup
- sed -i "/^$typed\b/Id" /var/plexguide/pgvault.apprecall
-
- num=0
- rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
- while read p; do
- echo -n $p >>/var/plexguide/pgvault.output
- echo -n " " >>/var/plexguide/pgvault.output
- if [ "$num" == 7 ]; then
- num=0
- echo " " >>/var/plexguide/pgvault.output
- fi
- done >/var/plexguide/pgvault.buildup
+ sed -i "/^$typed\b/Id" /var/plexguide/pgvault.apprecall
+
+ num=0
+ rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
+ while read p; do
+ echo -n $p >>/var/plexguide/pgvault.output
+ echo -n " " >>/var/plexguide/pgvault.output
+ if [ "$num" == 7 ]; then
+ num=0
+ echo " " >>/var/plexguide/pgvault.output
+ fi
+ done /tmp/server.list
-
- ### List Out Apps In Readable Order (One's Not Installed)
- num=0
- rm -rf /var/plexguide/program.temp 1>/dev/null 2>&1
- while read p; do
- echo -n $p >>/var/plexguide/program.temp
- echo -n " " >>/var/plexguide/program.temp
- num=$((num + 1))
- if [ "$num" == 7 ]; then
- num=0
- echo " " >>/var/plexguide/program.temp
- fi
- done /tmp/server.list
+
+ ### List Out Apps In Readable Order (One's Not Installed)
+ num=0
+ rm -rf /var/plexguide/program.temp 1>/dev/null 2>&1
+ while read p; do
+ echo -n $p >>/var/plexguide/program.temp
+ echo -n " " >>/var/plexguide/program.temp
+ num=$((num + 1))
+ if [ "$num" == 7 ]; then
+ num=0
+ echo " " >>/var/plexguide/program.temp
+ fi
+ done /tmp/server.select
-
- if [[ "$server" == "exit" || "$server" == "Exit" || "$server" == "EXIT" || "$server" == "z" || "$server" == "Z" ]]; then exit; fi
-
- current2=$(cat /tmp/server.list | grep "\<$server\>")
- if [ "$current2" == "" ]; then
- badserver
- serverprime
- fi
-
- tempserver=$server
- ls -l /mnt/gdrive/plexguide/backup/$tempserver/protected/ | awk '{print $9}' | tail -n +2 >/var/plexguide/pgvault.restoreapps
-
- ### Blank Out Temp List
- rm -rf /var/plexguide/pgvault.apprecall 1>/dev/null 2>&1
- touch /var/plexguide/pgvault.apprecall
-
- while read p; do
- basename "$p" .tar >>/var/plexguide/pgvault.apprecall
- done /dev/null 2>&1
- touch /var/plexguide/program.temp
- mathprime
+ read -p '🌍 Type Server Name | Press [ENTER]: ' server /tmp/server.select
+
+ if [[ "$server" == "exit" || "$server" == "Exit" || "$server" == "EXIT" || "$server" == "z" || "$server" == "Z" ]]; then exit; fi
+
+ current2=$(cat /tmp/server.list | grep "\<$server\>")
+ if [ "$current2" == "" ]; then
+ badserver
+ serverprime
+ fi
+
+ tempserver=$server
+ ls -l /mnt/gdrive/plexguide/backup/$tempserver/protected/ | awk '{print $9}' | tail -n +2 >/var/plexguide/pgvault.restoreapps
+
+ ### Blank Out Temp List
+ rm -rf /var/plexguide/pgvault.apprecall 1>/dev/null 2>&1
+ touch /var/plexguide/pgvault.apprecall
+
+ while read p; do
+ basename "$p" .tar >>/var/plexguide/pgvault.apprecall
+ done /dev/null 2>&1
+ touch /var/plexguide/program.temp
+ mathprime
}
buildup2() {
- echo "$typed" >>/var/plexguide/pgvault.buildup
- sed -i "/^$typed\b/Id" /var/plexguide/pgvault.apprecall
-
- num=0
- rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
- while read p; do
- echo -n $p >>/var/plexguide/pgvault.output
- echo -n " " >>/var/plexguide/pgvault.output
- if [ "$num" == 7 ]; then
- num=0
- echo " " >>/var/plexguide/pgvault.output
- fi
- done >/var/plexguide/pgvault.buildup
+ sed -i "/^$typed\b/Id" /var/plexguide/pgvault.apprecall
+
+ num=0
+ rm -rf /var/plexguide/pgvault.output 1>/dev/null 2>&1
+ while read p; do
+ echo -n $p >>/var/plexguide/pgvault.output
+ echo -n " " >>/var/plexguide/pgvault.output
+ if [ "$num" == 7 ]; then
+ num=0
+ echo " " >>/var/plexguide/pgvault.output
+ fi
+ done /tmp/program_var
- # Execute Main Program
- backup_process
-
- sleep 2
- done /tmp/program_var
+ # Execute Main Program
+ backup_process
+
+ sleep 2
+ done /tmp/program_var
- # Execute Main Program
- backup_process
-
- sleep 2
- done /tmp/program_var
+ # Execute Main Program
+ backup_process
+
+ sleep 2
+ done /dev/null 2>&1
- fi
-
- ###### Start the Backup Process - Backup Locally First
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ Zipping Data Locally - $program_var [ Protected APPS ]
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
-
- path=$(cat /var/plexguide/server.hd.path)
- tarlocation=$(cat /var/plexguide/data.location)
- server_id=$(cat /var/plexguide/server.id)
-
- tar \
+ initial2
+
+ runningcheck
+ if [ "$running" == "1" ]; then
+ echo "↘️ Stopping Docker Container - $program_var [ Protected APPS ]"
+
+ sleep 1
+ docker stop $program_var 1>/dev/null 2>&1
+ clear_lines 1
+ fi
+
+ ###### Start the Backup Process - Backup Locally First
+ echo "↘️ Zipping Data Locally - $program_var [ Protected APPS ]"
+
+ path=$(cat /var/plexguide/server.hd.path)
+ tarlocation=$(cat /var/plexguide/data.location)
+ server_id=$(cat /var/plexguide/server.id)
+
+ tar \
--warning=no-file-changed --ignore-failed-read --absolute-names --warning=no-file-removed \
- --exclude-from=/opt/pgvault/exclude.list \
- -czf - /opt/appdata/${program_var} | openssl enc -e -aes256 -out /opt/appdata/plexguide/${program_var}.tar.gz ./
-
- ##### Restart Docker Application if was Running Prior
- if [ "$running" == "1" ]; then
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ Restarting Docker Application - $program_var [ Protected APPS ]
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
- sleep 2
- docker restart $program_var 1>/dev/null 2>&1
- fi
-
- ###### Backing Up Files to GDrive
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ Sending Zipped Data to Google Drive - $program_var [ Protected APPS ]
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
-
-# User specifying VARS
-useragent="$(cat /var/plexguide/uagent)"
-bwlimit="$(cat /var/plexguide/blitz.bw)"
-
-vfs_dcs="$(cat /var/plexguide/vfs_dcs)"
-vfs_mt="$(cat /var/plexguide/vfs_mt)"
-vfs_t="$(cat /var/plexguide/vfs_t)"
-vfs_c="$(cat /var/plexguide/vfs_c)"
-
-
- rclone --config /opt/appdata/plexguide/rclone.conf mkdir gdrive:/plexguide/backup/${server_id}/protected/ 1>/dev/null 2>&1
-
- rclone moveto ${tarlocation}/${program_var}.tar.gz \
+ --exclude-from=/opt/plexguide/menu/pgvault/exclude.list \
+ -czf - /opt/appdata/${program_var} | openssl enc -e -aes256 -out /opt/appdata/plexguide/${program_var}.tar.gz ./ \
+ | cut -b1-$(tput cols) | sed -u 'i\\o033[2K' | stdbuf -o0 tr '\n' '\r'; echo
+
+ clear_lines 2
+
+ ##### Restart Docker Application if was Running Prior
+ if [ "$running" == "1" ]; then
+ echo "↘️ Restarting Docker Application - $program_var [ Protected APPS ]"
+
+ sleep 2
+ docker restart $program_var 1>/dev/null 2>&1
+ clear_lines 1
+ fi
+
+ ###### Backing Up Files to GDrive
+ echo "↘️ Sending Zipped Data to Google Drive - $program_var [ Protected APPS ]"
+
+ # User specifying VARS
+ useragent="$(cat /var/plexguide/uagent 1>/dev/null 2>&1)"
+ bwlimit="$(cat /var/plexguide/blitz.bw 1>/dev/null 2>&1)"
+
+ vfs_dcs="$(cat /var/plexguide/vfs_dcs 1>/dev/null 2>&1)"
+ vfs_mt="$(cat /var/plexguide/vfs_mt 1>/dev/null 2>&1)"
+ vfs_t="$(cat /var/plexguide/vfs_t 1>/dev/null 2>&1)"
+ vfs_c="$(cat /var/plexguide/vfs_c 1>/dev/null 2>&1)"
+
+
+ rclone --config /opt/appdata/plexguide/rclone.conf mkdir gdrive:/plexguide/backup/${server_id}/protected/ 1>/dev/null 2>&1
+
+ rclone moveto ${tarlocation}/${program_var}.tar.gz \
gdrive:/plexguide/backup/${server_id}/protected/${program_var}.tar.gz \
- --config /opt/appdata/plexguide/rclone.conf \
- -v --checksum --stats-one-line --stats 1s --progress \
- --tpslimit=10 \
- --checkers="$vfs_c" \
- --transfers="$vfs_t" \
- --no-traverse \
- --fast-list \
- --bwlimit="$bwlimit" \
- --drive-chunk-size="$vfs_dcs" \
- --user-agent="$useragent"
-
- ##### Remove File Incase
- rm -rf ${tarlocation}/${program_var}.tar.gz 1>/dev/null 2>&1
+ --config /opt/appdata/plexguide/rclone.conf \
+ -v --checksum --stats-one-line --stats 1s --progress \
+ --tpslimit=10 \
+ --checkers="$vfs_c" \
+ --transfers="$vfs_t" \
+ --no-traverse \
+ --fast-list \
+ --bwlimit="$bwlimit" \
+ --drive-chunk-size="$vfs_dcs" \
+ --user-agent="$useragent" 1>/dev/null 2>&1
+
+ ##### Remove File Incase
+ rm -rf ${tarlocation}/${program_var}.tar.gz 1>/dev/null 2>&1
+ clear_lines 1
+ echo "✅ \"$program_var\" has been backed up to Google Drive"
}
######################################################## END - PG Vault Backup
#
##################################################### START - PG Vault Restore
restore_all_start() {
-
- while read p; do
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- Restoring: $p
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
-
- sleep 2.5
-
- # Store Used Program
- echo $p >/tmp/program_var
- # Execute Main Program
- restore_process
-
- sleep 2
- done /tmp/program_var
+ # Execute Main Program
+ restore_process
+
+ sleep 2
+ done /tmp/program_var
- # Execute Main Program
- restore_process
-
- sleep 2
- done /tmp/program_var
+ # Execute Main Program
+ restore_process
+
+ sleep 2
+ done /dev/null 2>&1
- fi
-
- ###### Start the Backup Process - Backup Locally First
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ UnZipping & Restoring Data - $program_var [ Protected APPS ]
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
-
- mkdir -p "/opt/appdata/${program_var}"
- rm -rf "/opt/appdata/${program_var}/*"
- chown -R 1000:1000 "/opt/appdata/${program_var}"
- chmod -R 775 "/opt/appdata/${program_var}"
- openssl enc -d -aes256 -in /opt/appdata/${program_var} | tar xz -C ${tarlocation}/${program_var}.tar.gz
- chown -R 1000:1000 "/opt/appdata/${program_var}"
- chmod -R 775 "/opt/appdata/${program_var}"
-
- ##### Restart Docker Application if was Running Prior
- if [ "$running" == "1" ]; then
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-↘️ Restarting Docker Application - $program_var
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
+ initial2
+ srecall=$(cat /tmp/server.select)
+ echo "↘️ Determining Initial File Size - $program_var [ Protected APPS ]"
+
+ size=$(du -sh --apparent-size /mnt/gdrive/plexguide/backup/${srecall}/protected/${program_var}.tar.gz | /usr/bin/awk '{print $1}')
sleep 2
- docker restart $program_var 1>/dev/null 2>&1
- fi
-
- ##### Remove File Incase
- rm -rf ${tarlocation}/${program_var}.tar 1>/dev/null 2>&1
+ echo "Initial File Size: $size"
+ sleep 2
+ clear_lines 2
+
+ ###### Backing Up Files to GDrive
+ echo "↘️ Downloading Data From Google Drive - $program_var [ Protected APPS ]"
+
+ # User specifying VARS
+ useragent="$(cat /var/plexguide/uagent)"
+ bwlimit="$(cat /var/plexguide/blitz.bw)"
+
+ vfs_dcs="$(cat /var/plexguide/vfs_dcs)"
+ vfs_mt="$(cat /var/plexguide/vfs_mt)"
+ vfs_t="$(cat /var/plexguide/vfs_t)"
+ vfs_c="$(cat /var/plexguide/vfs_c)"
+
+
+ rclone copy gdrive:/plexguide/backup/${srecall}/protected/${program_var}.tar.gr ${tarlocation} \
+ --config /opt/appdata/plexguide/rclone.conf \
+ -v --checksum --stats-one-line --stats 1s --progress \
+ --tpslimit=10 \
+ --checkers="$vfs_c" \
+ --transfers="$vfs_t" \
+ --no-traverse \
+ --fast-list \
+ --bwlimit="$bwlimit" \
+ --drive-chunk-size="$vfs_dcs" \
+ --user-agent="$useragent" \
+ | cut -b1-$(tput cols) | sed -u 'i\\o033[2K' | stdbuf -o0 tr '\n' '\r'; echo
+
+ clear_lines 2
+
+ ##### Stop Docker Container if Running
+ runningcheck
+ if [ "$running" == "1" ]; then
+ echo "↘️ Stopping Docker Container - $program_var [ Protected APPS ]"
+ sleep 1
+ docker stop $program_var 1>/dev/null 2>&1
+ clear_lines 1
+ fi
+
+ ###### Start the Backup Process - Backup Locally First
+ echo "↘️ UnZipping & Restoring Data - $program_var [ Protected APPS ]"
+
+ mkdir -p "/opt/appdata/${program_var}"
+ rm -rf "/opt/appdata/${program_var}/*"
+ chown -R 1000:1000 "/opt/appdata/${program_var}"
+ chmod -R 775 "/opt/appdata/${program_var}"
+ openssl enc -d -aes256 -in /opt/appdata/${program_var} | tar xz -C ${tarlocation}/${program_var}.tar.gz
+ chown -R 1000:1000 "/opt/appdata/${program_var}"
+ chmod -R 775 "/opt/appdata/${program_var}"
+
+ clear_lines 1
+ ##### Restart Docker Application if was Running Prior
+ if [ "$running" == "1" ]; then
+ echo "↘️ Restarting Docker Application - $program_var"
+ sleep 2
+ docker restart $program_var 1>/dev/null 2>&1
+ clear_lines 1
+ fi
+
+ ##### Remove File Incase
+ rm -rf ${tarlocation}/${program_var}.tar 1>/dev/null 2>&1
}
##################################################### END - PG Vault Restore
#
##################################################### START - Backup Interface
vaultbackup() {
- ### List Out Apps In Readable Order (One's Not Installed)
- notrun=$(cat /var/plexguide/program.temp)
- buildup=$(cat /var/plexguide/pgvault.output)
-
- if [ "$buildup" == "" ]; then buildup="NONE"; fi
+ ### List Out Apps In Readable Order (One's Not Installed)
+ notrun=$(cat /var/plexguide/program.temp)
+ buildup=$(cat /var/plexguide/pgvault.output)
+
+ if [ "$buildup" == "" ]; then buildup="NONE"; fi
tee <<-EOF
-
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🚀 Backup & Restore ~ Data Storage [ Protected APPS ]
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
@@ -507,39 +449,38 @@ $buildup
[A] Backup
[Z] Exit
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
EOF
- read -p '🌍 Type APP for QUEUE | Type all to backup all apps | Press [ENTER]: ' typed ")
- if [ "$current2" != "" ]; then
- queued
- vaultbackup
- fi
-
- cat /var/plexguide/pgvault.buildup >/tmp/appcheck.5
- cat /var/plexguide/pgvault.apprecall >>/tmp/appcheck.5
- current1=$(cat /tmp/appcheck.5 | grep "\<$typed\>")
- if [ "$current1" == "" ]; then badinput && vaultbackup; fi
-
- buildup
+ read -p '🌍 Type APP for QUEUE | Type all to backup all apps | Press [ENTER]: ' typed ")
+ if [ "$current2" != "" ]; then
+ queued
+ vaultbackup
+ fi
+
+ cat /var/plexguide/pgvault.buildup >/tmp/appcheck.5
+ cat /var/plexguide/pgvault.apprecall >>/tmp/appcheck.5
+ current1=$(cat /tmp/appcheck.5 | grep "\<$typed\>")
+ if [ "$current1" == "" ]; then badinput && vaultbackup; fi
+
+ buildup
}
##################################################### END - Backup Interface
#
##################################################### START - Restore Interface
vaultrestore() {
- notrun=$(cat /var/plexguide/program.temp)
- buildup=$(cat /var/plexguide/pgvault.output)
-
- if [ "$buildup" == "" ]; then buildup="NONE"; fi
+ notrun=$(cat /var/plexguide/program.temp)
+ buildup=$(cat /var/plexguide/pgvault.output)
+
+ if [ "$buildup" == "" ]; then buildup="NONE"; fi
tee <<-EOF
-
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🚀 Backup & Restore ~ Data Recall [ Protected APPS ]
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
@@ -556,87 +497,92 @@ $buildup
[A] Restore
[Z] Exit
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
EOF
- read -p '🌍 Type APP for QUEUE | Type all to restore all apps | Press [ENTER]: ' typed ")
- if [ "$current2" != "" ]; then
- queued
- vaultrestore
- fi
-
- cat /var/plexguide/pgvault.buildup >/tmp/appcheck.5
- cat /var/plexguide/pgvault.apprecall >>/tmp/appcheck.5
- current1=$(cat /tmp/appcheck.5 | grep "\<$typed\>")
- if [ "$current1" == "" ]; then badinput && vaultrestore; fi
-
- buildup2
+ read -p '🌍 Type APP for QUEUE | Type all to restore all apps | Press [ENTER]: ' typed ")
+ if [ "$current2" != "" ]; then
+ queued
+ vaultrestore
+ fi
+
+ cat /var/plexguide/pgvault.buildup >/tmp/appcheck.5
+ cat /var/plexguide/pgvault.apprecall >>/tmp/appcheck.5
+ current1=$(cat /tmp/appcheck.5 | grep "\<$typed\>")
+ if [ "$current1" == "" ]; then badinput && vaultrestore; fi
+
+ buildup2
}
##################################################### START Primary Interface
primaryinterface() {
- initial2
+ initial2
tee <<-EOF
-
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-📁 Backup & Restore Interface [ Protected APPS ]
+📁 Backup & Restore Interface [ Protected APPS ]
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-🌵 Disk Used Space: $used of $capacity | $percentage Used Capacity
+🌵 Disk Used Space: $used of $capacity | $percentage Used Capacity
-[1] Data Backup
-[2] Data Restore
-[3] Current Server ID : $server_id
-[4] Processing Location: $tarlocation
+[1] Backup your data
+[2] Restore your data
+[3] Change Server ID | Current Server ID : $server_id
+[4] Processing Location | Current location : $tarlocation
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
[Z] Exit
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
EOF
- read -p 'Type a Number | Press [ENTER]: ' typed /var/plexguide/server.id.stored
- bash /opt/plexguide/menu/interface/serverid.sh
- primaryinterface
- elif [ "$typed" == "4" ]; then
- bash /opt/pgvault/location.sh
- primaryinterface
- elif [[ "$typed" == "Z" || "$typed" == "z" ]]; then
- exit
- else
- badinput
- primaryinterface
- fi
+ read -p 'Type a Number | Press [ENTER]: ' typed /var/plexguide/server.id.stored
+ bash /opt/plexguide/menu/interface/serverid.sh
+ primaryinterface
+ elif [ "$typed" == "4" ]; then
+ bash /opt/pgvault/location.sh
+ primaryinterface
+ elif [[ "$typed" == "Z" || "$typed" == "z" ]]; then
+ exit
+ else
+ badinput
+ primaryinterface
+ fi
}
##################################################### END Primary Interface
restorecheck() {
- if [ "$restoreid" == "[NOT-SET]" ]; then
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-⛔️ WARNING! - You Must Set Your Recovery ID First! Restarting Process!
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-EOF
- read -n 1 -s -r -p "Press [ANY] Key to Continue "
- echo
- primaryinterface
- exit
- fi
+ if [ "$restoreid" == "[NOT-SET]" ]; then
+ echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
+ echo "⛔️ WARNING! - You Must Set Your Recovery ID First! Restarting Process!"
+ echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
+
+ read -n 1 -s -r -p "Press [ANY] Key to Continue "
+ echo
+ clear_lines 5
+ primaryinterface
+ exit
+ fi
+}
+
+## Clear output text for n lines ($1 args)
+clear_lines() {
+ for (( i=1; i <= $(($1)); i++ ));do
+ tput cuu1
+ tput el
+ done
}
diff --git a/menu/plex/plex.sh b/menu/plex/plex.sh
index 634835d..67ddec2 100644
--- a/menu/plex/plex.sh
+++ b/menu/plex/plex.sh
@@ -13,7 +13,7 @@ touch /var/plexguide/plex.claim
# BAD INPUT
badinput() {
echo
- read -p '⛔️ ERROR - BAD INPUT! | PRESS [ENTER] ' typed /var/plexguide/plex.pw
- echo "$user" >/var/plexguide/plex.user
- ansible-playbook /opt/plexguide/menu/plex/token.yml
- token=$(cat /var/plexguide/plex.token)
- if [ "$token" != "" ]; then
+ echo "$pw" >/var/plexguide/plex.pw
+ echo "$user" >/var/plexguide/plex.user
+ ansible-playbook /opt/plexguide/menu/plex/token.yml
+ token=$(cat /var/plexguide/plex.token)
+ if [ "$token" != "" ]; then
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
✅️ PlexToken Generation Succeeded!
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- sleep 4
- else
+ sleep 4
+ else
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-⛔️ PlexToken Generation Failed!
+⚠️ PlexToken Generation Failed!
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NOTE: Process will repeat until you succeed or exit!
EOF
- read -p 'Confirm Info | Press [ENTER] ' typed /var/plex_dupe/plex.token
# BAD INPUT
badinput() {
echo
- read -p '⛔️ ERROR - BAD INPUT! | PRESS [ENTER] ' typed /var/plex_dupe/plex.pw
- echo "$user" >/var/plex_dupe/plex.user
-
-bash /opt/plexguide/menu/plex_dupe/scripts/plex_token.sh
-
- token=$(cat /var/plex_dupe/plex.token)
- if [ "$token" != "" ]; then
+ echo "$pw" >/var/plex_dupe/plex.pw
+ echo "$user" >/var/plex_dupe/plex.user
+
+ bash /opt/plexguide/menu/plex_dupe/scripts/plex_token.sh
+
+ token=$(cat /var/plex_dupe/plex.token)
+ if [ "$token" != "" ]; then
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
✅️ Details stored Succeeded!
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- sleep 4
- else
+ sleep 4
+ else
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-⛔️ Details Failed!
+⚠️ Details Failed!
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NOTE: Process will repeat until you succeed or exit!
EOF
- read -p 'Confirm Info | Press [ENTER] ' typed /var/plexguide/plexpatrol/plex.pw
- echo "$user" >/var/plexguide/plexpatrol/plex.user
-PLEX_LOGIN=$(cat /var/plexguide/plexpatrol/plex.user)
-PLEX_PASSWORD=$(cat /var/plexguide/plexpatrol/plex.pw)
-
-curl -qu "${PLEX_LOGIN}":"${PLEX_PASSWORD}" 'https://plex.tv/users/sign_in.xml' \
+ echo "$pw" >/var/plexguide/plexpatrol/plex.pw
+ echo "$user" >/var/plexguide/plexpatrol/plex.user
+ PLEX_LOGIN=$(cat /var/plexguide/plexpatrol/plex.user)
+ PLEX_PASSWORD=$(cat /var/plexguide/plexpatrol/plex.pw)
+
+ curl -qu "${PLEX_LOGIN}":"${PLEX_PASSWORD}" 'https://plex.tv/users/sign_in.xml' \
-X POST -H 'X-Plex-Device-Name: PlexMediaServer' \
-H 'X-Plex-Provides: server' \
-H 'X-Plex-Version: 0.9' \
@@ -107,37 +107,37 @@ curl -qu "${PLEX_LOGIN}":"${PLEX_PASSWORD}" 'https://plex.tv/users/sign_in.xml'
-H 'X-Plex-Product: Plex Media Server'\
-H 'X-Plex-Device: Linux'\
-H 'X-Plex-Client-Identifier: XXXX' --compressed >/tmp/plex_sign_in
-X_PLEX_TOKEN=$(sed -n 's/.*\(.*\)<\/authentication-token>.*/\1/p' /tmp/plex_sign_in)
-if [ -z "$X_PLEX_TOKEN" ]; then
- cat /tmp/plex_sign_in
- rm -f /tmp/plex_sign_in
- >&2 echo 'Failed to retrieve the X-Plex-Token.'
- exit 1
-fi
-echo $X_PLEX_TOKEN >/var/plexguide/plexpatrol/plex.token
-
- token=$(cat /var/plexguide/plexpatrol/plex.token)
- if [ "$token" != "" ]; then
+ X_PLEX_TOKEN=$(sed -n 's/.*\(.*\)<\/authentication-token>.*/\1/p' /tmp/plex_sign_in)
+ if [ -z "$X_PLEX_TOKEN" ]; then
+ cat /tmp/plex_sign_in
+ rm -f /tmp/plex_sign_in
+ >&2 echo 'Failed to retrieve the X-Plex-Token.'
+ exit 1
+ fi
+ echo $X_PLEX_TOKEN >/var/plexguide/plexpatrol/plex.token
+
+ token=$(cat /var/plexguide/plexpatrol/plex.token)
+ if [ "$token" != "" ]; then
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
✅️ PlexToken Generation Succeeded!
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- sleep 4
- else
+ sleep 4
+ else
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-⛔️ PlexToken Generation Failed!
+⚠️ PlexToken Generation Failed!
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NOTE: Process will repeat until you succeed or exit!
EOF
- read -p 'Confirm Info | Press [ENTER] ' typed /dev/null 2>&1
@@ -53,7 +57,7 @@ varstart() {
chmod -R 775 $fileag 1>/dev/null 2>&1
fi
- ###################### FOR VARIABLS ROLE SO DOESNT CREATE RED - START
+ ###################### FOR VARIABLES ROLE SO DOESNT CREATE RED - START
variable $filevg/pgfork.project "NOT-SET"
variable $filevg/pgfork.version "NOT-SET"
variable $filevg/tld.program "NOT-SET"
@@ -66,6 +70,7 @@ varstart() {
variable $filevg/transcode.path "standard"
variable $filevg/pgclone.transport "NOT-SET"
variable $filevg/plex.claim ""
+ variable $filevg/auto.update "NOT-SET"
#### Temp Fix - Fixes Bugged AppGuard
serverht=$(cat /var/plexguide/server.ht)
@@ -98,7 +103,7 @@ varstart() {
# For PG UI - Force Variable to Set
ports=$(cat /var/plexguide/server.ports)
- if [ "$ports" == "" ]; then
+if [ "$ports" == "" ]; then
echo "Open" >$filevg/pg.ports
else echo "Closed" >$filevg/pg.ports; fi
@@ -153,65 +158,32 @@ menuprime1
else menuprime2; fi
}
-menuprime1() {
- transport=$(cat /var/plexguide/pg.transport)
-
- # Menu Interface
- tee <<-EOF
-
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-🌎 $transport | Version: $pgnumber | ID: $serverid
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-🌵 Disk Used Space: $used of $capacity | $percentage Used Capacity
-EOF
-
- # Displays Second Drive If GCE
- edition=$(cat /var/plexguide/pg.server.deploy)
- if [ "$edition" == "feeder" ]; then
- used_gce=$(df -h /mnt --local | tail -n +2 | awk '{print $3}')
- capacity_gce=$(df -h /mnt --local | tail -n +2 | awk '{print $2}')
- percentage_gce=$(df -h /mnt --local | tail -n +2 | awk '{print $5}')
- echo " GCE Disk Used Space: $used_gce of $capacity_gce | $percentage_gce Used Capacity"
- fi
-
- disktwo=$(cat "/var/plexguide/server.hd.path")
- if [ "$edition" != "feeder" ]; then
- used_gce2=$(df -h "$disktwo" --local | tail -n +2 | awk '{print $3}')
- capacity_gce2=$(df -h "$disktwo" --local | tail -n +2 | awk '{print $2}')
- percentage_gce2=$(df -h "$disktwo" --local | tail -n +2 | awk '{print $5}')
-
- if [[ "$disktwo" != "/mnt" ]]; then
- echo " 2nd Disk Used Space: $used_gce2 of $capacity_gce2 | $percentage_gce2 Used Capacity"
- fi
- fi
+menuprime1() { # GCE Optimised Menu
+transport=$(cat /var/plexguide/pg.transport)
+top_menu
+disk_space_used_space
# Declare Ports State
ports=$(cat /var/plexguide/server.ports)
- if [ "$ports" == "" ]; then
- ports="OPEN"
- else ports="CLOSED"; fi
+if [ "$ports" == "" ]; then
+ echo "Open" >$filevg/pg.ports
+ else echo "Closed" >$filevg/pg.ports; fi
tee <<-EOF
-- GCE optimized surface --
-[1] PTS-Traefik : Reverse Proxy
+[1] Traefik : Reverse Proxy | Domain Setup
[2] Port Guard : [$ports] Protects the Server App Ports
-[3] PTS-Shield : Enable Google's OAuthentication Protection
-[4] PTS-Clone : Mount Transport
-[5] PTS-Apps : Apps
-[6] PTS-Vault : Backup & Restore
-[7] Traktarr : Fill Sonarr/Radarr over Trakt lists.
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-[Z] Exit
-
-"$wisword"
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+[3] Authelia : Enable Authelia
+[4] Mount : Mount Cloud Based Storage
+[5] Apps : Apps ~ Core, Community & Removal
+[6] Vault : Backup & Restore
+[7] Traktarr : Fill arrs with Trakt lists
EOF
+end_menu
# Standby
- read -p '↘️ Type Number | Press [ENTER]: ' typed $1; fi
+ file="$1"
+ if [ ! -e "$file" ]; then echo "$2" >$1; fi
}
deploycheck() {
- dcheck=$(systemctl is-active traktarr.service)
- if [ "$dcheck" == "active" ]; then
- dstatus="✅ DEPLOYED"
- else dstatus="⚠️ NOT DEPLOYED"; fi
+ dcheck=$(systemctl is-active traktarr.service)
+ if [ "$dcheck" == "active" ]; then
+ dstatus="✅ DEPLOYED"
+else dstatus="⚠️ NOT DEPLOYED"; fi
}
sonarrcheck() {
- pcheck=$(docker ps --format '{{.Names}}' | grep "sonarr")
- if [ "$pcheck" == "" ]; then
-
+ pcheck=$(docker ps --format '{{.Names}}' | grep "sonarr")
+ if [ "$pcheck" == "" ]; then
+
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-⛔️ WARNING! - Sonarr is not Installed/Running! Cannot Proceed!
+⚠️ WARNING! - Sonarr is not Installed/Running! Cannot Proceed!
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- read -p 'Confirm Info | PRESS [ENTER] ' typed exit
EOF
- read -p '↘️ Type Sonarr Location | Press [ENTER]: ' typed /var/plexguide/traktarr/pgtrak.sprofile
- read -p '🌎 Acknowledge Info | Press [ENTER] ' typed /var/plexguide/traktarr/pgtrak.sprofile
+ read -p '🛈 Acknowledge Info | Press [ENTER] ' typed exit
EOF
- read -p '↘️ Type Radarr Location | Press [ENTER]: ' typed /var/plexguide/traktarr/pgtrak.rprofile
- read -p '🌎 Acknowledge Info | Press [ENTER] ' typed /var/plexguide/traktarr/pgtrak.rprofile
+ read -p '🛈 Acknowledge Info | Press [ENTER] ' typed exit
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- read -p '↘️ Type API Client | Press [ENTER]: ' typed /var/plexguide/traktarr/pgtrak.client
- read -p '↘️ Type API Secret | Press [ENTER]: ' typed /var/plexguide/traktarr/pgtrak.secret
-
- if [[ "$typed" == "exit" || "$typed" == "Exit" || "$typed" == "EXIT" || "$typed" == "z" || "$typed" == "Z" ]]; then
- question1
- else
+ read -p '↘️ Type API Client | Press [ENTER]: ' typed /var/plexguide/traktarr/pgtrak.client
+ read -p '↘️ Type API Secret | Press [ENTER]: ' typed /var/plexguide/traktarr/pgtrak.secret
+
+ if [[ "${typed}" == "exit" || "${typed}" == "z" ]]; then
+ question1
+ else
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
@@ -189,16 +189,16 @@ NOTE: The API Client and Secret is set! Ensure to setup your and
INFO: Messed up? Rerun this API Interface to update the information!
EOF
-
- read -p '🌎 Acknowledge Info | Press [ENTER] ' typed exit
EOF
- read -p '↘️ Type Sonarr Location | Press [ENTER]: ' typed /dev/null 2>&1
-
- file="$typed/test"
- if [ -e "$file" ]; then
-
+ sleep 1.5
+
+ mkdir ${typed}/test 1>/dev/null 2>&1
+
+ file="${typed}/test"
+ if [ -e "$file" ]; then
+
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
@@ -264,22 +264,22 @@ EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
-
- ### Removes /mnt if /mnt/unionfs exists
- #check=$(echo $typed | head -c 12)
- #if [ "$check" == "/mnt/unionfs" ]; then
- #typed=${typed:4}
- #fi
-
- echo "$typed" >/var/plexguide/traktarr/pgtrak.spath
- read -p '🌎 Acknowledge Info | Press [ENTER] ' typed /var/plexguide/traktarr/pgtrak.spath
+ read -p '🛈 Acknowledge Info | Press [ENTER] ' typed >> mkdir $typed/testfolder
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- read -p '🌎 Acknowledge Info | Press [ENTER] ' typed exit
EOF
- read -p '↘️ Type Radarr Location | Press [ENTER]: ' typed /dev/null 2>&1
-
- file="$typed/test"
- if [ -e "$file" ]; then
-
+ sleep 1.5
+
+ mkdir ${typed}/test 1>/dev/null 2>&1
+
+ file="${typed}/test"
+ if [ -e "$file" ]; then
+
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
@@ -366,84 +366,84 @@ EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- echo "$typed" >/var/plexguide/traktarr/pgtrak.rpath
- read -p '🌎 Acknowledge Info | Press [ENTER] ' typed /var/plexguide/traktarr/pgtrak.rpath
+ read -p '🛈 Acknowledge Info | Press [ENTER] ' typed >> mkdir $typed/testfolder
+Advice: Exit PTS and (Test) Type >>> mkdir ${typed}/testfolder
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- read -p '🌎 Acknowledge Info | Press [ENTER] ' typed /var/plexguide/traktarr/pgtrakyear.max && question1
- else maxyear ; fi
+ read -p '↘️ Type Number | Press [ENTER]: ' typed /var/plexguide/traktarr/pgtrakyear.max && question1
+else maxyear ; fi
}
minyear() {
-((mnyear=$(date +"%Y")-80))
-((mxyear=$(date +"%Y")-1))
-
+ ((mnyear=$(date +"%Y")-80))
+ ((mxyear=$(date +"%Y")-1))
+
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-🚀 Limit the minimum allowed year for traktarr
+🛈 Limit the minimum allowed year for traktarr
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Set a Year between [ $mnyear ] and [ $mxyear ]
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- read -p '↘️ Type Number | Press [ENTER]: ' typed /var/plexguide/traktarr/pgtrakyear.min && question1
- else minyear ; fi
+ read -p '↘️ Type Number | Press [ENTER]: ' typed /var/plexguide/traktarr/pgtrakyear.min && question1
+else minyear ; fi
}
lang() {
-
+
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-🚀 Set language profile for Sonarr
+🛈 Set language profile for Sonarr
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Language Profile that TV shows are assigned to. Only applies to Sonarr v3.
-Note :
-you have to write it as it really is,
+Note :
+you have to write it as it really is,
if you make a mistake, it will not be checked for conformity!
the first letter must be large, otherwise it will not work
@@ -451,43 +451,43 @@ Sample:
English
German
-France
+France
Spain
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- read -p '↘️ Type your language profile from Sonarr | Press [ENTER]: ' typed /var/plexguide/traktarr/pgtrak.lang
- if [[ "$typed" == "exit" || "$typed" == "Exit" || "$typed" == "EXIT" || "$typed" == "z" || "$typed" == "Z" ]]; then
- echo -e "English" /var/plexguide/traktarr/pgtrak.lang
- question1
- else
- clear
- lprofil=$(cat /var/plexguide/traktarr/pgtrak.lang)
+ read -p '↘️ Type your language profile from Sonarr | Press [ENTER]: ' typed /var/plexguide/traktarr/pgtrak.lang
+ if [[ "${typed}" == "exit" || "${typed}" == "z" ]]; then
+ echo -e "English" /var/plexguide/traktarr/pgtrak.lang
+ question1
+ else
+ clear
+ lprofil=$(cat /var/plexguide/traktarr/pgtrak.lang)
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
✅ Traktarr Language Profil set
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
You have chosen the language profile = $lprofil
-
+
If this is wrong now, traktarr will not work 100%
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
- read -p '🌎 Acknowledge Info | Press [ENTER] ' typed /var/plexguide/traktarr/pgtrak.minimumavailability && question1 ;;
- 2) echo -e "in_cinemas" >/var/plexguide/traktarr/pgtrak.minimumavailability && question1 ;;
- 3) echo -e "released" >/var/plexguide/traktarr/pgtrak.minimumavailability && question1 ;;
- 4) echo -e "predb" >/var/plexguide/traktarr/pgtrak.minimumavailability && question1 ;;
- z) exit ;;
- Z) exit ;;
- *) question1 ;;
+
+ read -p '↘️ Type Number | Press [ENTER]: ' typed /var/plexguide/traktarr/pgtrak.minimumavailability && question1 ;;
+ 2) echo -e "in_cinemas" >/var/plexguide/traktarr/pgtrak.minimumavailability && question1 ;;
+ 3) echo -e "released" >/var/plexguide/traktarr/pgtrak.minimumavailability && question1 ;;
+ 4) echo -e "predb" >/var/plexguide/traktarr/pgtrak.minimumavailability && question1 ;;
+ z) exit ;;
+ Z) exit ;;
+ *) question1 ;;
esac
}
-##################################################################################
+##################################################################################
credits() {
-clear
-chk=$(figlet traktarr | lolcat )
+ clear
+ chk=$(figlet traktarr | lolcat )
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-🚀 traktarr Credits
+🛈 traktarr Credits
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
$chk
@@ -540,19 +540,19 @@ $chk
#########################################################################
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
-
- echo
- read -p 'Confirm Info | PRESS [ENTER] ' typed /var/plexguide/traktarr/docker.status
- elif [[ "$radarr" = "radarr" ]] && [[ "$sonarr" = "" ]]; then
- echo "⛔ WARNING! - Traktarr will only work for movies! Sonarr Not Running!" >/var/plexguide/traktarr/docker.status
- else [[ "$radarr" = "radarr" ]] && [[ "$sonarr" = "sonarr" ]]
- echo "🚀 Traktarr - Radarr and Sonarr detected | it will work for both" >/var/plexguide/traktarr/docker.status; fi
+ read -p 'Confirm Info | PRESS [ENTER] ' typed /var/plexguide/traktarr/docker.status
+ elif [[ "$radarr" = "radarr" ]] && [[ "$sonarr" = "" ]]; then
+ echo "⛔ WARNING! - Traktarr will only work for movies! Sonarr Not Running!" >/var/plexguide/traktarr/docker.status
+ else [[ "$radarr" = "radarr" ]] && [[ "$sonarr" = "sonarr" ]]
+ echo "🛈 Traktarr - Radarr and Sonarr detected | it will work for both" >/var/plexguide/traktarr/docker.status; fi
}
question1() {
-
- api=$(cat /var/plexguide/traktarr/pgtrak.secret)
- if [ "$api" == "NOT-SET" ]; then api="NOT-SET"; else api="SET"; fi
-
- rpath=$(cat /var/plexguide/traktarr/pgtrak.rpath)
- spath=$(cat /var/plexguide/traktarr/pgtrak.spath)
- rprofile=$(cat /var/plexguide/traktarr/pgtrak.rprofile)
- sprofile=$(cat /var/plexguide/traktarr/pgtrak.sprofile)
- mxyear=$(cat /var/plexguide/traktarr/pgtrakyear.max)
- mnyear=$(cat /var/plexguide/traktarr/pgtrakyear.min)
- langprofil=$(cat /var/plexguide/traktarr/pgtrak.lang)
- avmin=$(cat /var/plexguide/traktarr/pgtrak.minimumavailability)
- status=$(cat /var/plexguide/traktarr/docker.status)
-
- deploycheck
-
+
+ api=$(cat /var/plexguide/traktarr/pgtrak.secret)
+ if [ "$api" == "NOT-SET" ]; then api="NOT-SET"; else api="SET"; fi
+
+ rpath=$(cat /var/plexguide/traktarr/pgtrak.rpath)
+ spath=$(cat /var/plexguide/traktarr/pgtrak.spath)
+ rprofile=$(cat /var/plexguide/traktarr/pgtrak.rprofile)
+ sprofile=$(cat /var/plexguide/traktarr/pgtrak.sprofile)
+ mxyear=$(cat /var/plexguide/traktarr/pgtrakyear.max)
+ mnyear=$(cat /var/plexguide/traktarr/pgtrakyear.min)
+ langprofil=$(cat /var/plexguide/traktarr/pgtrak.lang)
+ avmin=$(cat /var/plexguide/traktarr/pgtrak.minimumavailability)
+ status=$(cat /var/plexguide/traktarr/docker.status)
+
+ deploycheck
+
tee <<-EOF
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-🚀 Traktarr Interface
+🛈 Traktarr Interface
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
$status
@@ -690,84 +690,84 @@ NOTE: Changes Made? Must Redeploy Traktarr when Complete!
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
EOF
-
- read -p '↘️ Type Number | Press [ENTER]: ' typed } 1>/dev/null 2>&1
- info1=$(echo ${info:0:32}) 1>/dev/null 2>&1
- echo "$info1" >/var/plexguide/traktarr/pgtrak.rapi
- fi
-
- file="/opt/appdata/sonarr/config.xml"
- if [ -e "$file" ]; then
- info=$(cat /opt/appdata/sonarr/config.xml)
- info=${info#*} 1>/dev/null 2>&1
- info2=$(echo ${info:0:32}) 1>/dev/null 2>&1
- echo "$info2" >/var/plexguide/traktarr/pgtrak.sapi
- fi
- fi
- ansible-playbook /opt/plexguide/menu/pg.yml --tags traktarr && question1 ;;
-
- 11) prefill && clear && question1 ;;
- 12) endbanner && clear && question1 ;;
- C) credits && clear && question1 ;;
- c) credits && clear && question1 ;;
- z) exit ;;
- Z) exit ;;
- *) question1 ;;
- esac
+ read -p '🛈 Acknowledge Info | Press [ENTER] ' typed } 1>/dev/null 2>&1
+ info1=$(echo ${info:0:32}) 1>/dev/null 2>&1
+ echo "$info1" >/var/plexguide/traktarr/pgtrak.rapi
+ fi
+
+ file="/opt/appdata/sonarr/config.xml"
+ if [ -e "$file" ]; then
+ info=$(cat /opt/appdata/sonarr/config.xml)
+ info=${info#*} 1>/dev/null 2>&1
+ info2=$(echo ${info:0:32}) 1>/dev/null 2>&1
+ echo "$info2" >/var/plexguide/traktarr/pgtrak.sapi
+ fi
+ fi
+ ansible-playbook /opt/plexguide/menu/pg.yml --tags traktarr && question1 ;;
+
+ 11) prefill && clear && question1 ;;
+ 12) endbanner && clear && question1 ;;
+ C) credits && clear && question1 ;;
+ c) credits && clear && question1 ;;
+ z) exit ;;
+ Z) exit ;;
+ *) question1 ;;
+ esac
}
# FUNCTIONS END ##############################################################
diff --git a/menu/version/file.sh b/menu/version/file.sh
index 99a456a..66de287 100644
--- a/menu/version/file.sh
+++ b/menu/version/file.sh
@@ -5,14 +5,175 @@
# URL: https://pgblitz.com - http://github.pgblitz.com
# GNU: General Public License v3.0
################################################################################
-mainstart() {
-mkdir -p /opt/ptsupdate 1>/dev/null 2>&1
-git clone --single-branch https://github.com/MHA-Team/PTS-Update.git /opt/ptsupdate 1>/dev/null 2>&1
-chown -cR 100:1000 /opt/ptsupdate 1>/dev/null 2>&1
-chmod -cR 775 /opt/ptsupdate 1>/dev/null 2>&1
-apt-get install dos2unix -yqq && dos2unix /opt/ptsupdate/update.sh 1>/dev/null 2>&1
-ansible-playbook /opt/plexguide/menu/alias/alias.yml 1>/dev/null 2>&1
-}
+program=$(cat /tmp/program_var)
+cname=$program
+
+if [[ -f "/var/plexguide/$program.cname" ]]; then
+ cname=$(cat /var/plexguide/$program.cname)
+fi
+
+domain=$(cat /var/plexguide/server.domain)
+port=$(cat /tmp/program_port)
+ip=$(cat /var/plexguide/server.ip)
+ports=$(cat /var/plexguide/server.ports)
+hdpath=$(cat /var/plexguide/server.hd.path)
+
+
+
+if [ "$program" == "plex" ]; then extra="/web"; else extra=""; fi
+
+tee <<-EOF
+
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+🛈 Access Configuration Info
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+EOF
+
+tee <<-EOF
+▫ $program:${port} <- Use this as the url when connecting another app to $program.
+EOF
+
+if [ "$ports" == "" ]; then
+ tee <<-EOF
+▫ $ip:${port}${extra}
+EOF
+fi
+
+if [ "$domain" != "NOT-SET" ]; then
+ if [ "$ports" == "" ]; then
+ tee <<-EOF
+▫ $domain:${port}${extra}
+EOF
+ fi
+ tee <<-EOF
+▫ $cname.$domain${extra}
+EOF
+fi
+
+if [ "$program" == "plex" ]; then
+ tee <<-EOF
+
+First Time Plex Claim Notice
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+EOF
+ if [ "$domain" != "NOT-SET" ]; then
+ tee <<-EOF
+▫ http://plex.${domain}:32400 <-- Use http; not https
+EOF
+ fi
+
+ tee <<-EOF
+▫ $ip:${port}${extra}
+EOF
+fi
+
+if [[ "$program" == *"sonarr"* ]] || [[ "$program" == *"radarr"* ]] || [[ "$program" == *"lidarr"* ]]; then
+ tee <<-EOF
+
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+💬 Manual Configuration Required
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+ $program requires additional manual configuration!
+EOF
+ if [[ "$program" == *"sonarr"* ]] || [[ "$program" == *"radarr"* ]] || [[ "$program" == *"lidarr"* ]] || [[ "$program" == *"qbittorrent"* ]]; then
+ tee <<-EOF
+
+ $program requires "downloader mappings" to enable hardlinking and rapid importing.
+
+ If you do not have these mappings, $program can't rename and move the files on import.
+ This will result in files being copied instead of moved, and it will cause other issues.
+
+ The mappings are on the download client settings (advanced setting), at the bottom of the page.
+
+ Visit https://github.com/Pandaura/PTS-Team/wiki/Remote-Path-Mappings for more information.
+
+EOF
+ fi
+ tee <<-EOF
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+⚠ Failure to perform manual configuration changes will cause problems!
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+🌍 Visit the wiki for instructions on how to configure $program.
+
+ https://github.com/Pandaura/PTS-Team/wiki/$program
+
+EOF
+fi
+
+####--------
+
+
+if [[ "$program" == *"sabnzbd"* ]] || [[ "$program" == *"nzbget"* ]] ; then
+ cclean=$(cat /var/plexguide/cloneclean)
+ tee <<-EOF
+
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+💬 NOTE / INFO
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+ for incomplete downloads $program used the folder $hdpath/incomplete/nzb
+ for finished downloads $program used the folder $hdpath/downloads/nzb
+
+ beware the cloneclean is set to $cclean min
+
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+EOF
+fi
+
+if [[ "$program" == *"sabnzbd"* ]] ; then
+
+ tee <<-EOF
+
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+💬 sabnzbd api_key = $sbakey
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+EOF
+fi
+if [[ "$program" == *"rutorrent"* ]] || [[ "$program" == *"qbittorrent"* ]] || [[ "$program" == *"deluge"* ]]; then
+ cclean=$(cat /var/plexguide/cloneclean)
+ tclean=$(($cclean*2))
+ tee <<-EOF
+
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+💬 NOTE / INFO
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+ for incomplete downloads $program used the folder $hdpath/incomplete/torrent
+ for finished downloads $program used the folder $hdpath/downloads/torrent
+
+ beware the cloneclean is set to $tclean min
+
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+EOF
+fi
+if [ "$program" == "plex" ]; then
+ tee <<-EOF
+
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+💬 Manual Configuration Required
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+we prefer using plex_autoscan, unlike other alternatives,
+that does not put a lot of pressure on the API of your Google Account.
+
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+EOF
+fi
+
+if [ "$hdpath" != "/mnt" ]; then
+ sbakey=$(cat /opt/appdata/sabnzbd/sabnzbd.ini | grep "api_key" | head -n 1 | awk '{print $3}')
+ tee <<-EOF
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+You must add /mnt self to the docker container again
+Your $hdpath is not /mnt
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+EOF
+fi
endline() {
tee <<-EOF
diff --git a/pandaura.gif b/pandaura.gif
new file mode 100644
index 0000000..2e7da7e
Binary files /dev/null and b/pandaura.gif differ
diff --git a/place.holder b/place.holder
index acd8a35..0b2a0a3 100644
--- a/place.holder
+++ b/place.holder
@@ -1 +1 @@
-fuuuu
\ No newline at end of file
+fuuuu ---- Childish comment
\ No newline at end of file